SICS-294 anstohttp.c
Histmem now only calls TaskYield after SICS has finished initalising, this stops the statusfile task from being called early and overwriting the status file. Created ANSTO_MakeHistMemory command to install ANSTO_HistAction Added veto functions. Mapped the HistDriver interface Pause() and Continue() commands to AnstoHttpVeto and AnstoHttpNoVeto. Implemented an ANSTO_Histaction to call AnstoHttpPause when sent a "pause" subcommand. hmcontrol_ansto.c Call AnstoHttpPause() directly when Pause_HM_After_Count is set to preserver current behaviour. counterdriv.c Now sends the correct "SICS RESUME" command to resume a paused count. ansto_sctdriveadapter.c NEW This lets you create driveable objects from script-context controllers which have one node for setting a parameter and another node for reading the parameter (eg temperature controllers, choppers, velocity selectors) sctemonadapter.c NEW This generates an environment monitor interface for script-context controllers so that the emon object in SICS will be able to pause counters if the controller goes out of tolerance. sct_usbtmcprot.c, usbtmc.h NEW First attempt at a protocol handler for USB Test and Measurement Class devices sct_julabo_lh45.tcl NEW Implements script-context controller for the Julabo LH45 temperature controller. Makefile Added ansto_sctdriveadapter and sctemonadapter hardsup/makefile Added velocity selector and usbtmc protocol handlers hardsup/sct_velselprot.c Simplified, don't worry about trying to implement a login handler for now, just implement a "Reading" handler. site_ansto.c Add the velocity selector and USBTMC protocol handlers. Added the ANSTO_MakeHM command instrument/config/hipadaba/common_instrument_dictionary.tcl Added support for auxiliary data, ie extra meta-data entries in the "data" group of the nexus file. Add new NXvelocity_selector object under /instrument. instrument/config/hipadaba/hipadaba_configuration_common.tcl Add the new "sct_object" script-context controller objects to the hdb tree. instrument/config/hipadaba/instdict_specification.tcl Define the new sct_object controllers. instrument/config/hmm/hmm_configuration_common_1.tcl Use the new ANSTO_MakeHM command to create histmem drivers which support veto. Define allowed attributes and elements for the BAT_TABLE and FAT_TABLE Stop between counts instead of pausing because setting pause now sends a veto. instrument/config/motors/sct_jogmotor_common.tcl You now need to specify klass when creating a jogmotor. instrument/config/motors/sct_positmotor_common.tcl You can now specify an optional function which calculates the instrument parameter (eg attenuation) from a posit table entry when defining a posit motor. instrument/config/nexus/nxscripts_common_1.tcl Report file status info in the /experiment section of the hdb tree. Add auxiliary data to data file. Handle saving data from script-context controller objects. instrument/util/script_context_util.tcl Added procedure to set required properties for saving script-context object data. instrument/util/utility.tcl Added set_sct_object_attributes proc to automatically set required attributes on SCT_OBJECTs Fixed hlistplainprop to deal with empty property fields on hdb nodes. instrument/server_config.tcl Call the new nexus initialisation command and set attributes on sct objects. hrpd/config/motors/motor_configuration.tcl New absenc home readings for mchi and mphi. New absenc home and range for mf1 hipd/config/commands/commands.tcl Exported and published the new ajscmds so that they can be used in batch files. hipd/config/motors/motor_configuration.tcl New mchi absenc home rsd/config/hmm/hmm_configuration.tcl Provide support for saving corrected hmm data rsd/config/motors/motor_configuration.tcl Use simple names for motors. SICS-329 sans/config/INSTCFCOMMON.TXT Added julabo and lakeshore configuration files to list. sans/config/optics/guide_configuration.tcl Added entrance aperture positions to the configuration table and the cn_maps which map the index to the component ID. sans/commands/commands.tcl The "guide" command now set EApPosYmm after driving the guides in place. The indexed position to component maps (cn_map) have been moved to the guide_configuration.tcl file. sans/motors/motor_configuration.tcl Set samy home to 56.1mm sans/config/velsel/sct_velsel.tc NEW Implements script-context controller object for the NVS40 velocity selector. TODO tilt-angle control, driveable interface. sans/config/hmm/hmm_configuration.tcl Set 5.08mm spacing on detector width. Use pixel-offset for vertical and horizontal detector axes. sans/config/motors/motor_configuration.tcl Swap directions of beamstops 4 and 5 (the two smallest) New config parameters for samx, samthet, apx, det, detoff, bsz, sans/config/motors/positmotor_configuration.tcl Added descriptive headers to positmotor configuration tables and new synstax for the make positmotor command. sans/config/nexus/nxscripts.tcl Implemented initialisation command. sans/config/parameters/parameters.tcl Added SampleThickness and TransmissionFlag. Calculate SamplePosYmm from samy and SamyOffsetmm. Added beamstops to hdb tree. reflectometer/config/nexus/nxscripts.tcl Implement the initialisation procedure. r2767 | ffr | 2009-03-31 10:16:54 +1100 (Tue, 31 Mar 2009) | 123 lines
This commit is contained in:
Ferdi Franceschini
committed by
Douglas Clowes
Douglas Clowes
parent
eec824f98a
commit
d2f57e4615
@@ -39,11 +39,11 @@ namespace eval optics {
|
||||
|
||||
##############################
|
||||
##
|
||||
# @brief set_guide uses a lookup table to setup the collimation system
|
||||
# @brief The "guide" command uses a lookup table to setup the collimation system
|
||||
# @param row, selects a row from the guide configuration table
|
||||
#
|
||||
# eg\n
|
||||
# set_guide HIRES
|
||||
# guide ga
|
||||
command guide "
|
||||
text=[join [array names ::optics::guide_configuration] , ] configuration
|
||||
" {
|
||||
@@ -51,22 +51,16 @@ namespace eval optics {
|
||||
variable guide_configuration
|
||||
variable guide_configuration_columns
|
||||
if [ catch {
|
||||
array set c1_map {G 1 MT 2 P 3}
|
||||
array set c2_map {MT 1 G 2 A 3}
|
||||
array set c3_map {MT 1 G 2 A 3}
|
||||
array set c4_map {MT 1 G 2 A 3}
|
||||
array set c5_map {MT 1 G 2 A 3}
|
||||
array set c6_map {MT 1 G 2 A 3}
|
||||
array set c7_map {MT 1 G 2 A 3}
|
||||
array set c8_map {MT 1 G 2 A 3}
|
||||
array set c9_map {LP 1 MT 2 G 3 A 4 L 5}
|
||||
|
||||
foreach el $guide_configuration($configuration) guide $guide_configuration_columns {
|
||||
lappend to_config $guide
|
||||
lappend to_config [set ${guide}_map($el)]
|
||||
foreach {compselection position} $guide_configuration($configuration) {
|
||||
foreach el $compselection guide $guide_configuration_columns {
|
||||
lappend to_config $guide
|
||||
lappend to_config [set ::optics::${guide}_map($el)]
|
||||
}
|
||||
::optics::guide -set feedback status BUSY
|
||||
set msg [eval "drive $to_config"]
|
||||
EApPosYmm $position
|
||||
}
|
||||
::optics::guide -set feedback status BUSY
|
||||
eval "drive $to_config"
|
||||
} message ] {
|
||||
::optics::guide -set feedback status IDLE
|
||||
if {$::errorCode=="NONE"} {return $message}
|
||||
|
||||
Reference in New Issue
Block a user