linse/sics
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

remove HMM component of Dingo

Browse Source 
r3598 | jgn | 2012-06-12 10:01:17 +1000 (Tue, 12 Jun 2012) | 1 line
This commit is contained in:
Jing Chen
2012-06-12 10:01:17 +10:00
committed by Douglas Clowes
parent 843c12d208
commit 97fcb9ecf3
1 changed files with 0 additions and 88 deletions
Download Patch File Download Diff File Expand all files Collapse all files

88
site_ansto/instrument/dingo/config/hmm/hmm_configuration.tcl
View File

@@ -6,55 +6,12 @@ source $cfPath(hmm)/hmm_cylindrical_detector_configuration.tcl
set sim_mode [SplitReply [hmm_simulation]]
proc ::histogram_memory::init_OAT_TABLE {} {
if [ catch {
OAT_TABLE X -setdata MAX_CHAN 8
OAT_TABLE Y -setdata MAX_CHAN 1024
OAT_TABLE X -setdata BMIN -0.5
OAT_TABLE X -setdata BMAX 7.5
OAT_TABLE Y -setdata BMIN -0.5
OAT_TABLE Y -setdata BMAX 1023.5
OAT_TABLE -set X { 7.5 6.5 } NXC 8 Y { -0.5 0.5 } NYC 1024 T { 0 200000 } NTC 1
} message ] {
if {$::errorCode=="NONE"} {return $message}
return -code error $message
}
}
proc CAT_TABLE {args} {
return {
<CAT>
<WIX APPLY="ENABLE" MIN_RAW="0" MAX_RAW="7" TABLE_SIZE="8">
<link_numeric_file filename="../../dingo_wix.dat" default_filename="../HMconfig/Default/dingo_wix.dat" />
</WIX>
<OFFSET_Y_PER_X APPLY="ENABLE" MIN_RAW="0" MAX_RAW="7" TABLE_SIZE="8" BASE_VAL="0">
<link_numeric_file filename="../../dingo_offset_y_per_x.dat" default_filename="../HMconfig/Default/dingo_offset_y_per_x.dat" />
</OFFSET_Y_PER_X>
<MAGNIFY APPLY="ENABLE" MIN_RAW="0" MAX_RAW="7" TABLE_SIZE="8" DIRECTION="X" MAX_IN="1023" MAX_OUT="1023" RANGE="UNSIGNED">
<link_numeric_file filename="../../dingo_magnify.dat" default_filename="../HMconfig/Default/dingo_magnify.dat" />
</MAGNIFY>
</CAT>
}
}
proc ::histogram_memory::init_CAT_TABLE {} {
CAT_TABLE -set MESYTEC_MPSD8_CHANNEL_GAINS {
1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
}
CAT_TABLE -set MESYTEC_MPSD8_THRESHOLDS { 10 }
CAT_TABLE -set MESYTEC_TUBE_PAIR_RESISTANCE_RATIOS {
1. 1. 1. 1. 1. 1. 1. 1.
}
CAT_TABLE -set MESYTEC_TUBE_MAGNIFICATIONS {
1. 1. 1. 1. 1. 1. 1. 1.
}
CAT_TABLE -set MESYTEC_TUBE_OFFSETS {
0. 0. 0. 0. 0. 0. 0. 0.
}
CAT_TABLE -set MESYTEC_TUBE_HISTOGRAM_WEIGHTS {
1 1 1 1 1 1 1 1
}
}
##
@@ -66,51 +23,6 @@ proc ::histogram_memory::detector_posn_degrees {} {
proc ::histogram_memory::pre_count {} {}
proc ::histogram_memory::post_count {} {}
proc ::histogram_memory::isc_initialize {} {
# Instrument specific X and Y dimension names
variable INST_NXC "oat_nxc_eff"
variable INST_NYC "oat_nyc_eff"
if [ catch {
::histogram_memory::init_hmm_objs
if {$::sim_mode == "true"} {
hmm configure oat_ntc_eff 1
hmm configure $INST_NYC 1024
hmm configure $INST_NXC 8
}
BAT_TABLE -init
# CAT_TABLE -init
SAT_TABLE -init
OAT_TABLE -init
FAT_TABLE -init
::histogram_memory::ic_initialize
::histogram_memory::set_graphtype "two_theta" "boundaries"
# MJL TODO detector geometry for Kookaburra TBD. Figures need revision during commissioning
# Width = 25mm spacing * 8 tubes = 5000mm (??? degree coverage)
# Height = 1015mm (tube length)
# Radius = 2400mm
detector_active_height_mm 1015
detector_active_height_mm lock
detector_active_width_mm 5000
detector_active_width_mm lock
detector_radius_mm 2400.0
detector_radius_mm lock
# hmm configure FAT_SIMULATED_EVENT_Y0 $y_bb0
# hmm configure FAT_SIMULATED_EVENT_Y1 $ybbmax
# hmm configure FAT_SIMULATED_EVENT_X0 $x_bb0
# hmm configure FAT_SIMULATED_EVENT_X1 $xbbmax
::histogram_memory::init_OAT_TABLE
::histogram_memory::init_SAT_TABLE
# ::histogram_memory::init_CAT_TABLE
::histogram_memory::upload_config Filler_defaults
set ::histogram_memory::histmem_axes(HOR) /instrument/detector/x_pixel_angular_offset
set ::histogram_memory::histmem_axes(VER) /instrument/detector/y_pixel_offset
} message ] {
if {$::errorCode=="NONE"} {return $message}
return -code error $message
}
}
proc histmem {cmd args} {