linse/sics
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Updated histmem configuration from ics1-kookaburra.

Browse Source
This commit is contained in:
Ferdi Franceschini
2013-11-23 19:51:28 +11:00
committed by Ferdi Franceschini
parent 0bf0af0847
commit 2d96d3de69
1 changed files with 14 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

27
site_ansto/instrument/kookaburra/config/hmm/hmm_configuration.tcl
View File

@@ -8,10 +8,10 @@ set sim_mode [SplitReply [hmm_simulation]]
proc ::histogram_memory::init_OAT_TABLE {} {
if [ catch {
OAT_TABLE X -setdata MAX_CHAN 8
OAT_TABLE X -setdata MAX_CHAN 16
OAT_TABLE Y -setdata MAX_CHAN 1024
OAT_TABLE X -setdata BMIN -0.5
OAT_TABLE X -setdata BMAX 7.5
OAT_TABLE X -setdata BMAX 15.5
OAT_TABLE Y -setdata BMIN -0.5
OAT_TABLE Y -setdata BMAX 1023.5
@@ -21,7 +21,7 @@ proc ::histogram_memory::init_OAT_TABLE {} {
hmm configure fat_frame_frequency $freq
hmm configure fat_frame_source INTERNAL
OAT_TABLE -set X { 7.5 6.5 } NXC 8 Y { -0.5 0.5 } NYC 1024 T { 0 200000 } NTC 1
OAT_TABLE -set X { -0.5 0.5 } NXC 16 Y { -0.5 0.5 } NYC 1024 T { 0 200000 } NTC 1
} message ] {
if {$::errorCode=="NONE"} {return $message}
return -code error $message
@@ -31,13 +31,13 @@ proc ::histogram_memory::init_OAT_TABLE {} {
proc CAT_TABLE {args} {
return {
<CAT>
<WIX APPLY="ENABLE" MIN_RAW="0" MAX_RAW="7" TABLE_SIZE="8">
<WIX APPLY="ENABLE" MIN_RAW="0" MAX_RAW="15" TABLE_SIZE="16">
<link_numeric_file filename="../../kookaburra_wix.dat" default_filename="../HMconfig/Default/kookaburra_wix.dat" />
</WIX>
<OFFSET_Y_PER_X APPLY="ENABLE" MIN_RAW="0" MAX_RAW="7" TABLE_SIZE="8" BASE_VAL="0">
<OFFSET_Y_PER_X APPLY="ENABLE" MIN_RAW="0" MAX_RAW="15" TABLE_SIZE="16" BASE_VAL="0">
<link_numeric_file filename="../../kookaburra_offset_y_per_x.dat" default_filename="../HMconfig/Default/kookaburra_offset_y_per_x.dat" />
</OFFSET_Y_PER_X>
<MAGNIFY APPLY="ENABLE" MIN_RAW="0" MAX_RAW="7" TABLE_SIZE="8" DIRECTION="X" MAX_IN="1023" MAX_OUT="1023" RANGE="UNSIGNED">
<MAGNIFY APPLY="ENABLE" MIN_RAW="0" MAX_RAW="15" TABLE_SIZE="16" DIRECTION="X" MAX_IN="1023" MAX_OUT="1023" RANGE="UNSIGNED">
<link_numeric_file filename="../../kookaburra_magnify.dat" default_filename="../HMconfig/Default/kookaburra_magnify.dat" />
</MAGNIFY>
</CAT>
@@ -46,20 +46,20 @@ return {
proc ::histogram_memory::init_CAT_TABLE {} {
CAT_TABLE -set MESYTEC_MPSD8_CHANNEL_GAINS {
1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
}
CAT_TABLE -set MESYTEC_MPSD8_THRESHOLDS { 10 }
CAT_TABLE -set MESYTEC_TUBE_PAIR_RESISTANCE_RATIOS {
1. 1. 1. 1. 1. 1. 1. 1.
1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1.
}
CAT_TABLE -set MESYTEC_TUBE_MAGNIFICATIONS {
1. 1. 1. 1. 1. 1. 1. 1.
1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1.
}
CAT_TABLE -set MESYTEC_TUBE_OFFSETS {
0. 0. 0. 0. 0. 0. 0. 0.
0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.
}
CAT_TABLE -set MESYTEC_TUBE_HISTOGRAM_WEIGHTS {
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
}
}
@@ -81,7 +81,7 @@ proc ::histogram_memory::isc_initialize {} {
if {$::sim_mode == "true"} {
hmm configure oat_ntc_eff 1
hmm configure $INST_NYC 1024
hmm configure $INST_NXC 8
hmm configure $INST_NXC 16
}
BAT_TABLE -init
# CAT_TABLE -init
@@ -92,7 +92,7 @@ proc ::histogram_memory::isc_initialize {} {
::histogram_memory::set_graphtype "two_theta" "boundaries"
# MJL TODO detector geometry for Kookaburra TBD. Figures need revision during commissioning
# Width = 25mm spacing * 8 tubes = 5000mm (??? degree coverage)
# Width = 25mm spacing * 16 tubes = 5000mm (??? degree coverage)
# Height = 1015mm (tube length)
# Radius = 2400mm
detector_active_height_mm 1015
@@ -114,6 +114,7 @@ proc ::histogram_memory::isc_initialize {} {
set ::histogram_memory::histmem_axes(HOR) /instrument/detector/x_pixel_angular_offset
set ::histogram_memory::histmem_axes(VER) /instrument/detector/y_pixel_offset
} message ] {
clientput ERROR:([info level 0]) $message
if {$::errorCode=="NONE"} {return $message}
return -code error $message
}