linse/sics
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Flight tube air pad control modified

Browse Source 
r1502 | dbx | 2007-02-17 10:40:39 +1100 (Sat, 17 Feb 2007) | 2 lines
This commit is contained in:
Dan Bartlett
2007-02-17 10:40:39 +11:00
committed by Douglas Clowes
parent 085e49dc0b
commit 29bca34ad6
1 changed files with 4 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
site_ansto/instrument/hipd/DMC2280/controller1.txt
View File

@@ -1,7 +1,7 @@
NO TE: WOMBAT - CONTROLLER 1
NO TE:
NO TE: $Revision: 1.5 $
NO TE: $Date: 2007-02-16 23:32:19 $
NO TE: $Revision: 1.6 $
NO TE: $Date: 2007-02-16 23:40:39 $
NO TE: Author: Dan Bartlett
NO TE: Last revision by: $Author: dbx $
NO TE:
@@ -71,7 +71,7 @@ NO TE: THE APDONE BIT IS USED SO THAT THE CODE ONLY RUNS WHEN THE
NO TE: STATE OF FTUBE CHANGES - THE DELAYS ARENT RUNNING EVERY CYCLE
NO TE: IN THE 2ND IF, THE OFF-SOLENOIDS ARENT HELD ENERGISED IN CASE THE
NO TE: VALVE MANUAL OVER RIDE IS NEEDED.
IF (MOF=0)&(APDONE=0);'REQUESTING FLIGHT TUBE BE MOVABLE
IF (_MOF=0)&(APDONE=0);'REQUESTING FLIGHT TUBE BE MOVABLE
WT500;' WAIT FOR MOTOR TO STABILISE
SB 12;' DRIVE WHEEL UP-SOLENOID OFF
CB 11;' DRIVE WHEEL DOWN-SOLENOID ON
@@ -80,7 +80,7 @@ SB 10;' SAMPLE STAGE AIR PAD OFF-SOLENOID OFF
CB 9;' SAMPLE STAGE AIR PAD ON-SOLENOID ON
APDONE=1
ENDIF
IF (MOF=1)&(APDONE=1);'FLIGHT TUBE MOTION FINISHED
IF (_MOF=1)&(APDONE=1);'FLIGHT TUBE MOTION FINISHED
SHF;' FOLLOWING STEPS MUST BE RUN BEFORE MOTOR CAN BE TURNED OFF
WT1000;' WAIT FOR FLIGHT TUBE TO SETTLE
SB 9;' SAMPLE STAGE AIR PAD ON-SOLENOID OFF