e8baff57d7
heliox: improve drivers
...
- adjustable sorb temperatures
- two phases: one for about 5 min at sorbset1, then sorbset2
2025-07-11 15:25:59 +02:00
4941232be6
add bool type to the displayed curves
2025-07-08 17:56:34 +02:00
21870536d1
ft.config: change wall sensor to Pt
2025-07-08 09:10:31 +02:00
893bd5fa4b
automatic LN2 fill with ILM - fix problems on restart
...
on the first reading, the level value might be invalid,
then it tries to fill and switch to inactive because there
is not valid level value.
fix: stay watching as long as the level is invalid
2025-07-04 10:51:54 +02:00
35abc1c182
show SECoP/cfg for recorders
...
+ auto select stick when stick_menu inf <name>.config
starts with <name>
2025-06-23 13:01:33 +02:00
6a191e49da
revert: hepump/trinamic: set pullup resistors correctly
...
this was an error. the problem is the wiring.
2025-06-23 12:27:20 +02:00
1b9100d96c
configure neodry for instruments using it
2025-06-23 11:20:30 +02:00
1f1b5a2b6e
partially revert 'better' fix for missing name_label
2025-06-18 08:12:52 +02:00
a172bbb6be
better intermediate fix for missing name_label / stick_label
2025-06-18 08:09:05 +02:00
2fdb2c5c9e
intermediate fix for missing name_label / stick_label
2025-06-18 08:03:21 +02:00
274ee37922
jtccr: fix pid table
2025-06-17 16:18:51 +02:00
b0720933a7
hepump/trinamic: set pullup resistors correctly
2025-06-17 16:03:41 +02:00
3201c9e3c9
cryotel: bug fix with cryotel::updatecool
2025-06-17 16:02:01 +02:00
e0489ba4d3
add various config files
2025-06-17 13:14:18 +02:00
fbf37b37f2
update dil5.stick
...
but this may no longer to be needed ...
2025-06-17 13:10:48 +02:00
0c1428ddee
update stuff for SC group
2025-06-17 13:10:07 +02:00
90fd7af06c
secop.config: add stick_menu
2025-06-17 13:09:31 +02:00
a5738fd0d4
SECoP: add sea_recorder command and setups for sea recorder
...
NICOS might call this in order to start SEA recording from
SECoP servers
2025-06-17 13:04:11 +02:00
61eac1aa9b
dil12: add 'off' to the heater range enum
2025-06-17 12:59:53 +02:00
0d9a3d35f8
send ACTIVE only after all nodes are connected
...
used for sea_recorder
2025-06-17 11:41:09 +02:00
df499953d9
let recorders get the frappy cfg names (lowercase)
2025-06-17 11:40:31 +02:00
e819507c3e
fix typo
2025-06-17 11:39:38 +02:00
56fa2978f4
MA02: exchanged ts_2 sensor
2025-06-17 11:39:38 +02:00
84dfd06543
dil4: try up to 10 times in case of communication errors with IGH
2025-06-17 11:39:38 +02:00
8edb3c6869
haake: make 2 versions depending on extra T sensor
2025-05-19 11:35:05 +02:00
3063d61639
add hrpt2 and zbrea2 to .gitignore
2025-05-08 10:16:37 +02:00
a87ac46fd8
tcl/drivers/ipsmag.tcl heater must be numeric
2025-05-08 09:05:58 +02:00
l_samenv
b8028039d1
renamed test_secop4.* to test_secop.*
...
+ remove other versions of test_secop*
2025-03-20 09:08:08 +01:00
l_samenv
f125bf1f28
ah2700: fix issue with detecting echo
2025-02-28 11:27:34 +01:00
l_samenv
ee3e8d38d8
change samenv.psi.ch to linse-c.psi.ch
2025-02-28 11:27:07 +01:00
l_samenv
58113622bd
lsc370: try to improve behaviour with heater in open loop mode
2025-02-28 11:27:07 +01:00
l_samenv
59ef340f0b
Merge branch 'master' of gitlab.psi.ch-samenv:samenv/sea
2025-02-28 11:24:06 +01:00
l_samenv
24f15db38f
ah2550: fix auto detection and disabling of serial echo
2025-02-24 11:34:11 +01:00
l_samenv
14e7133d85
rename obsolete dilsc.config
2025-01-30 09:43:53 +01:00
l_samenv
42d46ec652
update gitignore
2025-01-30 08:27:47 +01:00
l_samenv
53e4f126ed
update gitignore
2025-01-17 17:05:57 +01:00
l_samenv
b8218e6203
move a lot of stuff to git
2025-01-17 17:05:02 +01:00
l_samenv
be52adfaef
Merge branch 'master' of gitlab.psi.ch-samenv:samenv/sea
2025-01-09 18:08:36 +01:00
l_samenv
5d90e74e00
disable writing frappy-style sea history
2025-01-09 18:07:47 +01:00
l_samenv
6737e3f736
hide calibration in mom driver
2025-01-09 18:07:24 +01:00
l_samenv
f6083bd47a
ignore calib_data files
2025-01-09 18:02:09 +01:00
l_samenv
f428c0939d
remove calib_data from git
2025-01-09 17:59:55 +01:00
510f6b563e
add varioxb.stick
2024-12-11 10:30:45 +01:00
l_samenv
596fe4e37c
add ah2550 driver
2024-12-04 14:39:11 +01:00
6fa7cf8867
dblctrl: smart selection of mode (up, down, stable)
...
when switching from inactive to active
2024-11-26 15:26:08 +01:00
40487dcb31
ma11: remove alarm on VTI_pt
2024-11-26 15:25:56 +01:00
l_samenv
3d170cea97
add calib run from 2024-11-08
2024-11-11 16:47:13 +01:00
l_samenv
f5a129b6d9
improve autodevice deature
...
for autodevice to work, it is not necessary to be unplugged
for 60 seconds, only for a short time.
fixed this behaviour
2024-11-11 16:41:41 +01:00
l_samenv
5d8fa3b24f
do not set target parameter in error depending on status
2024-11-11 16:40:49 +01:00
l_samenv
86ea0c1489
Merge branch 'master' of gitlab.psi.ch-samenv:samenv/sea
2024-11-11 16:39:40 +01:00
