Module.setFastPoll may be called depending on status in order to
change the poll interval dependent whether the module is busy or
not. It is assured that the new interval is applied immediately.
Change-Id: I2bd8f68440dc4a93b39e5083a579fc1c123fe578
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27896
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- remove secop.poller and basic poller
- regular polls for 'important' parameters done by method doPoll
- all other parameters are polled slower (slowInterval) and
with lower priority (only one at a time when main poll is due)
- nopoll decorator for read_* to disable poll
- enablePoll attribute (default True) for disabling polling a module
- fast polls may be implemented by means of a statemachine
- configurable slow poll interval
+ allow a Parameter to override a Property (parameter
Readable.pollinterval overrides Module.pollinterval)
Change-Id: Ib1b3453041a233678b7c4b4add22ac399670e447
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27832
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
- complain when super call is omitted (this is a common programming
error in Mixins)
- redesign waiting mechanism for startup
+ rename MultiEvent method 'setfunc' to 'get_trigger'
Change-Id: Ica27a75597321f2571a604a7a55448cffb1bec5e
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27369
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
fix 2 problems:
- in case the window is smaller than the pollinterval, isAtTarget might be False
for up to the timeout delay
- in case the history is shorter than the window, and the ramp is fast enough to miss
any points during ramp, isAtTarget is True before the window time is reached.
This happens because the history is reset on write_target
+ do not wait when target is not changed (by more than precision)
tested!
Change-Id: Ia4ff4378fe91fa93be50168b2883a20b49ebfb6a
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27159
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
- wrong unit for 'ramp'
- disable Setposition for TemperatureController
- write_target should return the new target
- AnalogInput should not crash initialisation if reading the unit fails
- convert super(...) calls to py3 style super()
- use proper exception chaining
- NamedDigital*put: mapping may already be a dict.
Change-Id: I03ce5f29581dcb3b33466771e7a8b8dd4b1e2bdb
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25960
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Tested-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
- removed secop/metaclass.py
- moved code from ModuleMeta to modules.HasAccessibles.__init_subclass__
- reworked properties:
assignment obj.property = value now always allowed
- reworked Parameters and Command to be true descriptors
- Command must now be solely used as decorator
- renamed 'usercommand' to 'Command'
- command methods no longer start with 'do_'
- reworked mechanism to determine accessible order:
the attribute paramOrder, if given, determines order of accessibles
+ fixed some issues makeing the IDE more happy
+ simplified code for StatusType and added a test for it
Change-Id: I8045cf38ee6f4d4862428272df0b12a7c8abaca7
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25049
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
handling of mappings for NamedDigital*put needs to be improved!
Change-Id: I015cb1d26d049d3caecc0e03baa9f523951f004c
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/22932
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
modules using the old poller (now called secop.poller.BasicPoller)
need to explcitly declare it (pollerClass = BasicPoller)
BasicPoller is still used in:
secop_mlz/amagnet.py
secop_mlz/entangle.py
secop/simulation.py
Remark: before removing BasicPoller we may need a replacement for
Readable.pollParams
Change-Id: If1ae8b68e02f13e601334656b818337c882e06cc
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/21910
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
'maxage' is not really used at any place. remove it, as this makes
the code cleaner
Change-Id: I6f10b4ab91fc57640336db1832716ca9012eb241
Reviewed-on: https://forge.frm2.tum.de/review/20347
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
for easier distinction:
- camelCase or singleword: framework method
- snake_case: driver method
(driver) parameters are lowercase, single word framework variables may
have to start with uppercase letters to distinguish...
Change-Id: I76536b6390324625b242c4f190553014c2ca61d6
Reviewed-on: https://forge.frm2.tum.de/review/20295
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
initialisation occurs in this order:
- object creeation (via __init__ which should consume the cfg values it knows about)
- registering each object with the dispatcher
- calling init_module() on each module (for connecting to other modules, checking hw, creating threads....)
- calling start_module(cb) on each module. after the module finished startup it should call cb(self) once.
This is the right place to do initialisation of hw which is not needed to read from the hw.
(uploading curves, polling/re-setting all parameters, etc.)
Change-Id: Ieaf9df5876e764634836861241f58ab986027f44
Reviewed-on: https://forge.frm2.tum.de/review/18566
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
no more automatic definition by just declaring do_<command>
Change-Id: Ided91b5ae6fe657a6134f1cc14cc6484570a3646
Reviewed-on: https://forge.frm2.tum.de/review/18206
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
unfortunately IntEnum can't be bent like we would need it (extensible).
So we had to write our own....
The members of the Enum still behave like ints, but also have
.name and .value attributes, should they be needed.
needed adoptions to correctly use (and test) the EnumType are included.
Change-Id: Ie019d2f449a244c4fab00554b6c6daaac8948b59
Reviewed-on: https://forge.frm2.tum.de/review/17843
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
The command 'setposition' wasn't sane declared so the use of one of the
devices using this command lead always to a ProgrammingError during the
'describe' command via the server interface.
Change-Id: I34a6b07e8f0fbd861496515a5e18d3181ad134d5
Reviewed-on: https://forge.frm2.tum.de/review/17715
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Tested-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
StringIO::multicommunicate can now only handle up to 100 messages.
Should be sufficient.
Change-Id: Id3ccdf03143b80a37aa0ef0b87c47090ef802a42
Reviewed-on: https://forge.frm2.tum.de/review/16288
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Tested-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
+ rework GUI
- include a combobox for selection of visibility
- include a checkbox wether validation should be done in the client
- remove unused lineEdit
+ improve datatypes
+ improve tests for new descriptive data
+ metaclasse: fix overlooked read_* or write_* func's
+ improve polling
+ Introduce new ErrorClasses
+ dispatcher: use new features of datatypes + PARAMS
+ improve lib
+ autopep8
+ first working version of MLZ_entangle integration
+ split specific stuff into it's own package (MLZ,demo,ess)
Change-Id: I8ac3ce871b28f44afecbba6332ca741095426712
