make sure module methods are not called after shutdownModule
+ fix: when mod.enablePoll is False, pollInfo is None
therefore we have to check before access
Change-Id: I83b28607b25996376939175be8abf0c5b27bcac1
The Parameter Properties 'value', 'default' and 'constant'
have ValueType, so they are not checked in the setProperty call.
We have to do this explicitly in Module._add_accessible.
Change-Id: I1e35adf2fe539411b4aebacd813adb07497de95b
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/35797
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Alexander Zaft <a.zaft@fz-juelich.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
The test for method names 'read_<param>' and 'write_<param>'
without a defined parameter is simplified. We do not check
anymore method names from base classes. Base classes
inheriting from HasAccessible are checked anyway at the
place they are defined.
+ add a test for it
+ move some tests to a new file test_all_modules.py, as
test_modules.py is getting too long
+ fix missing doc string (frappy.simulation.SimDrivable.stop)
Change-Id: Id8a9afe5c977ae3b1371bd40c6da52be2fc79eb9
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/35503
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
This is meant to replace change 33375.
Optional commands and parameters may be declared with the argument
optional=True. In principle, optional commands are not really needed
to be declared, but doing so is nice for documentation reasons
and for inherited accessible properties.
Optional parameters and commands can not be used and are not
exported als long as they are not overridden in subclasses.
- add a test for this
+ fix an issue with checking for methods like read_<param> without
<param> being a parameter
Change-Id: Ide5021127a02778e7f2f7162555ec8826f1471cb
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/35495
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Alexander Zaft <a.zaft@fz-juelich.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
In the previous code, the equipment_id was overridden by the
server name when the interface argument was given over
the commandline. This was leftover from the previous config
file format, where the config files not neccessarly needed
an equipment_id.
Change-Id: I2fc248372a7d2f61cc0690804268d6d066a0a9fa
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/35391
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Add a new custom module property 'original_id' indicating
the equipment_id the modules originally belongs to.
This property is only given, when distinct from the equipment_id
of the SEC node.
It happens when multiple config files are given, for all modules
but the ones given in the first file, and for routed modules,
when multiple nodes are routed or own modules are given.
+ fix an issue in router: additional modules were ignore in case
of a single node.
+ small cosmetic changes in config.py reducing IDE complains
Change-Id: If846c47a06158629cef807d22b91f69e4f416563
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/35396
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
'tcp://' may be omitted on interfaces
add missing 'tcp://' earlier in code, so we do not need to check
for missing 'tcp://' again.
Change-Id: Ie9b4dbd168aebdb6edfe71dbd2cfc25e9229fe67
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/35321
Reviewed-by: Georg Brandl <g.brandl@fz-juelich.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
happens e.g. then writing status = StatusType(...) instead of
status = Parameter(datatype=StatusType(...)) on the class level
+ improve doc strings
Change-Id: I05a0b0b0da4438a40b525da40018bb5b09fd5303
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/35001
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- rel_path = ['tm', '.', 'set'] should mean:
'tm': tm parameters first, with /<obj?/tm as main value
'.': then all parameters directly at top level, except 'set'
'set': all parameters below 'set'
driving happens at object level
- better name mangling (the 1st appearance of the same shortname
is kept short)
The options given in the node configuration may be used
for both SecNode (equipment_id) and Dispatcher (when the
frappy.protocol.router.Router is used as dispatcher).
It is correct that both remove the options known to them.
Change-Id: I2a34073e4e5490dcf8db577d9cb74788c0cb657b
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/34989
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
no need to configure the name of SecNode and Dispatcher
Change-Id: I5199bbd77c74e4fe56b527a5a565a8285b0d831e
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/34988
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
followup error from change 34893
this bug appears in HasComlog, only when comlog is switched on
Change-Id: Ic0db5ae0b0af9981b0c91ebacf2eb6cd704aaa58
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/34987
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
slight change to make it compatible with py 3.6/3.7, where
reversed(<dict>) was not allowed.
Change-Id: Id440870b5523a866b3afb470ba5db9cd6a9bb0ec
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/35002
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
the bare value must be converted to a updated property.
add also a test for this
Change-Id: I261daaaa8e12d7f739d8b2e8389c1b871b26c5b3
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/34985
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Under some condition (no general config file) it's possible that the
piddir and logdir as well are lists of pathes which creates some errors
during the server start
This problems occurs at least in NICOS test suite where no general
config file is defined.
Change-Id: I94c5db927923834c1546dbc34e2490b07b0bf111
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/34952
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Jens Krueger <jens.krueger@tum.de>
