- write method may be used internally on a readonly parameter
+ add IDLE, WARN, BUSY and ERROR to secop.core
+ secop.datatype.EnumType: allow 'self' as member name
+ secop.lib.statemachine: log Restart and Stop exceptions only on debug level
+ secop_psi.ccu4.CCU4: explicit conversion to float
+ secop.proxy: remove superfluos and erroneous make_secop_error
Change-Id: I2f13d31ceacd2bde65eab64f8eae4225556c18f5
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27963
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- Attached checks now for proper base class
- fixes an error in Attached: attached saved in attachedModules
dict instead on the Attached object (which sits on the class!)
+ fix: in testonly mode errors must be logged before returning
+ fix: use repr of exception in poll to check for repeated errors
Change-Id: I141fa107fed48e58b55ddf1e071987656c0f618f
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27913
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- remove secop.poller and basic poller
- regular polls for 'important' parameters done by method doPoll
- all other parameters are polled slower (slowInterval) and
with lower priority (only one at a time when main poll is due)
- nopoll decorator for read_* to disable poll
- enablePoll attribute (default True) for disabling polling a module
- fast polls may be implemented by means of a statemachine
- configurable slow poll interval
+ allow a Parameter to override a Property (parameter
Readable.pollinterval overrides Module.pollinterval)
Change-Id: Ib1b3453041a233678b7c4b4add22ac399670e447
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27832
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
A common problematic practice is, to declare the value parameter
with the same FloatRange than the target. Because of measurement
errors, a value might be near, but outside the limit.
In order to avoid this, we force the programmer to declare a
bigger range for the value than for the target, or to
explicitly disable this check on a module property.
It is also fine to declare the value without limits.
This behavior may be disabled via command line option or in the
general config file. For simplicity, FloatRanges inside data
structures are not considered.
+ above command line option is also used to disable the error
handling on a string to float conversion
+ log appropriate error message for string to float conversion
Change-Id: Ib78ea1fb7c821442bf5847030573c8c27822dea5
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27574
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
modules with a couple of parameters with similar read_* or
write_* methods may handle them by generic methods wrapped
with decorators ReadHandler / WriteHandler
The trinamic driver is included in this change for demonstrating
how it works.
In a further step, the special handling for the iohandler stuff can
be moved away from secop.server and secop.params, using this feature.
+ fix problem on startup of trinamic driver (needs MultiEvent.queue)
+ some other small fixes
+ apply recommended functools.wraps for wrapping
Change-Id: Ibfeff9209f53c47194628463466cee28366e17ac
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27460
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- bin/secop-server options -v and -q applied to console logger only
- level for logfile taken from general config
- option for automatic deletion of old logfiles
- added 'comlog' level (between debug and info)
This allows to run the servers by default with 'comlog' level on
the logfiles, which helps a lot for analyzing very rare communication
errors in retrospect.
to avoid spamming of the normal log files, comlog data is stored
separately, one file per communicator
+ redesign of remote logging (no more need of LoggerAdapter)
Change-Id: Ie156a202b1e7304e50bbe830901bc75872f6ffe2
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27427
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- fix CommandType.__repr__
- secop/modules.py: command properties are allowed to be configured:
- section 2: remove comment and rename
- section 3: all accessible properties should be checked
- command description should be inherited also when taken from docstring
- move test for command inheritance to test_modules.py
- added tests to check for valid properties of commands
Change-Id: Ic7795e305048625558e415ece099e6824df6e2c4
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27135
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Correct inheritance has to follow the MRO, not only consider
the direct base classes.
Patchset 3: changed only tests, indicating that we need to change the code
Following patchsets include a major change in params.py and
modules.py. The parameter properties for inheritance, corresponding
mainly to the constructor arguments have to be stored separately
from the property values including inherited stuff.
Change-Id: Ibcbccb6abcc22e7e2d91df8f70ef64226684d8cc
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/26805
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
- nodestatechange callback must appear after the online attribute
is changed
- IntRange: move range validation outside of try except
- fixes on some error names
- well defined error message 'no such class' in secop.lib.get_class
- try again 4 times when starting Tcp Server on EADDRINUSE
- fix error handling
Change-Id: I4eee9b79ea8173936b9f5193b87e006ac8fca827
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/26171
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
Config errors are collected first, and raised after processing
all modules. This is more user friendly.
+ remove redundant check for predefined accessibles in modules.py
+ fixed error handling for exporting parameters in params.py
+ fixed handling of bare attributes overwriting properties
+ fixed race condition in writeInitParams
Change-Id: I894bda291ab85ccec3d771c4903393c808af0a2a
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25128
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- a new wrapper for a read function is not only to be created when
the a new read method is in the class dict, but also when
it is inherited, but not yet wrapped
- a handler must not be ignored, when a write method is inherited
- a proxy class must not call checkProperties
+ remove trailing spaces in tutorial_helevel.rst
Change-Id: I16024c14232ea200db91a1bc07ec23326219ab68
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25093
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- removed secop/metaclass.py
- moved code from ModuleMeta to modules.HasAccessibles.__init_subclass__
- reworked properties:
assignment obj.property = value now always allowed
- reworked Parameters and Command to be true descriptors
- Command must now be solely used as decorator
- renamed 'usercommand' to 'Command'
- command methods no longer start with 'do_'
- reworked mechanism to determine accessible order:
the attribute paramOrder, if given, determines order of accessibles
+ fixed some issues makeing the IDE more happy
+ simplified code for StatusType and added a test for it
Change-Id: I8045cf38ee6f4d4862428272df0b12a7c8abaca7
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25049
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- flatten hierarchy (some links do not work when using folders)
- add a tutorial for programming a simple driver
- clean description using inspect.cleandoc
+ fix a bug with 'unit' pseudo property in a Parameter used as override
Change-Id: I31ddba5d516d1ee5e785e28fbd79fca44ed23f5e
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/25000
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
New Syntax:
- define properties and parameters as class attributes directly
instead of items in class attribute dicts
- define commands with decorator @usercommand(...)
- old syntax is still supported for now
still to do (with decreasing priority):
- turn parameters into descriptors (vs. creating getters/setters)
- migrate all existing code to new syntax
- get rid of or reduce code in metaclasses using __set_name__ and
__init_subclass__ instead, including a fix for allowing py < 3.6
Change-Id: Id47e0f89c506f50c40fa518b01822c6e5bbf4e98
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/24991
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
with handlers, a parameter from the cfg file which is not the
first of parameters with the same handler were not written.
fix: write_<param> method is called for all parameters in
<module>.writeDict even if there is no poll entry.
with this fix, when a parameter has the property initwrite=True,
the write_<param> method is called even when <param>
is not polled and even when <module>.pollerClass is None
Change-Id: I9b397deb5b20709fc4fa7c860c85b251a204c7f6
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/23995
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
A proxy module is a module with a known structure, but
accessed over a SECoP connection.
For the configuration, a Frappy module class has to be given.
The proxy class is created from this, but does not inherit from it.
However, the class of the returned object will be subclass of the
SECoP base classes (Readable, Drivable etc.).
A possible extension might be, that instead of the Frappy class,
the JSON module description can be given, as a separate file
or directly in the config file.
Or we might offer a tool to convert the JSON description to
a python class.
Change-Id: I9212d9f3fe82ec56dfc08611d0e1efc0b0112271
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/22386
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
as module properties and parameters anyway share the same namespace,
there is no need to distinguish in config files.
+ a parameter default value may be overriden just with a class
attribute.
Both improvements help to switch between parameters and properties
more easily.
Change-Id: Ieb5cf3121f37c7c04e63345d3e95dfaf42726455
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/22054
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- analyze_<group> returns now a dict
- change_<group> has no more values arguments.
values may be read with change.readValues(), which leaves more
freedom to the programmer, especially if the values do not need
to be read before a change
Change-Id: I67b70302eaf9bbdac107df61123062fa133d501d
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/22047
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
this is a simplicifcation for the ppms driver
- the derivation of a changecmd from a querycmd is moved to
CmdHandler.__init__
- the special treatment of handlers when writing configured
parameters has moved to CmdHandler.write
- introduced Drivable.isDriving, changed Module.isBusy
Change-Id: I8862ecda9c8cc998bb018bd960f31c9488146707
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/22033
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
writable parameters with a configured value should call write_<param>
on initialization.
+ introduced 'initwrite' parameter property for more fine control over this
+ minor improvements in metaclass.py, param.py, commandhandler.py
+ rearranged test_modules.py
Change-Id: I2eec45da40947a73d9c180f0f146eb62efbda2b3
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/21986
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
in the current implementation, in case polling results in an error,
an error_update is generated. But on activate, for this parameter
a normal update will be generated, indicating that this value is ok.
With this change, parameters have an additonal attribue 'readerror',
which save the error generated on the last read, or None, if the
read was successful.
In addition, subsequent repeated errors are only reported the first
time.
Change-Id: I39f18d17debadd8aa5b904e59998d2172f3f11b9
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/21974
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
modules using the old poller (now called secop.poller.BasicPoller)
need to explcitly declare it (pollerClass = BasicPoller)
BasicPoller is still used in:
secop_mlz/amagnet.py
secop_mlz/entangle.py
secop/simulation.py
Remark: before removing BasicPoller we may need a replacement for
Readable.pollParams
Change-Id: If1ae8b68e02f13e601334656b818337c882e06cc
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/21910
Tested-by: JenkinsCodeReview <bjoern_pedersen@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
