45 lines
1.6 KiB
Markdown
45 lines
1.6 KiB
Markdown
# APU server
|
|
|
|
The APU is a Linux box to be used as a control box at LIN sample environment
|
|
|
|
servercfg/ contains the configuration files for all boxes
|
|
|
|
to_system/ contains the files to be installed in the system
|
|
|
|
## config files
|
|
|
|
filename: servercfg/(hostname)_(hexdigits).cfg
|
|
|
|
* (hostname) the hostname to be given on startup
|
|
* (hexdigits) the last six digits of one of the ethernet adresses of the interfaces on the APU
|
|
|
|
content of the config files:
|
|
|
|
```
|
|
[NETWORK]
|
|
# leftmost socket next to the console:
|
|
enp1s0=wan # the uplink, DHCP enabled, in netwoork n.x.y.z for 0 <= n < 192
|
|
enp1s0=wan,192.168.1.0/24 # the uplink, DHCP enabled, may be in addition in local network 192.168.1.x
|
|
# several networks might be specified, with comma separation
|
|
# must not contain addresses defined on other interfaces!
|
|
enp2s0=192.168.3.5 # the ip address of the device to be connected (DHCP or static),
|
|
# must be odd (the value one lower is used for the APU address in this interface)
|
|
enp3s0=off # disabled
|
|
enp4s0=192.168.3.1/24 # our ip address, the static address of the connected device must
|
|
# be within 1-254 and not match our own
|
|
# rightmost socket, next to the usb plugs
|
|
|
|
[ROUTER]
|
|
3000=/dev/ttyUSB0 # routing 3000 to the internal serial port /dev/ttyUSB0
|
|
5900=192.168.2.33 # routing VNC (local port 5900 to port 5900 on 192.168.2.33
|
|
8080=192.168.127.254:80 # routing 8080 to port 80 of 192.168.127.254
|
|
|
|
[FRAPPY]
|
|
cfg=uniax # the cfg file for the frappy server
|
|
port=5000 # the port for the frappy server
|
|
```
|
|
|
|
|
|
|
|
|