improve READE.md

README.md

@@ -149,18 +149,17 @@ If the returned ip address starts with 129.129., you can login with
 > ssh tc@apu-boot1
 ```
 
-    If this does not work you might try to use the console to
-    login.
+If this does not work you might try to use the console to login.
 
-    Connect a Mac with an USB to serial adapter (and null-modem!).
-    ```
-    mac> screen /dev/tty.usbserial-130 115200
-    ```
-
-    after logging in,
+Connect a Mac with an USB to serial adapter (and null-modem!).
+```
+mac> screen /dev/tty.usbserial-130 115200
+```
 
 
-### d) Copy Image to APU SSD
+### c) Copy Image to APU SSD
+
+After logging in, either by ssh or the console do:
 
 ```
 > write_to_ssd
@@ -177,18 +176,10 @@ which image?
 * It will take around 10 mins to write the image.
 * remove the stick, power off/on (or do `sudo reboot now`)
 
-
-### e) Install Display Firmware (control box only)
-
-If the display is in test mode finish it by touching several times.
-Then install the firmware:
-
-> cd boxtools
-> git pull
-> sudo python3 display.py fw_display.bin
+login as l_samenv@<ip from above>
 
 
-### f) Install Services
+### d) Install Services
 
 login as l_samenv
 ```
@@ -205,6 +196,16 @@ enter host name:
 DONE!
 
 
+### e) Install Display Firmware (control box only)
+
+If the display is in test mode. finish it by touching several times.
+Then install the firmware:
+
+> cd boxtools
+> git pull
+> sudo python3 display.py fw_display.bin
+
+
 ### f) Cloning an Image from an Existing Box
 
 Use (b) above to boot from the BOOT_TINY USB stick