Initial commit of SINQ EPICS Application

configure/CONFIG

@@ -0,0 +1,29 @@
+# CONFIG - Load build configuration data
+#
+# Do not make changes to this file!
+
+# Allow user to override where the build rules come from
+RULES = $(EPICS_BASE)
+
+# RELEASE files point to other application tops
+include $(TOP)/configure/RELEASE
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+-include $(TOP)/configure/RELEASE.Common.$(T_A)
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+
+CONFIG = $(RULES)/configure
+include $(CONFIG)/CONFIG
+
+# Override the Base definition:
+#INSTALL_LOCATION = $(TOP)
+
+# CONFIG_SITE files contain other build configuration settings
+include $(TOP)/configure/CONFIG_SITE
+-include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+ -include $(TOP)/configure/CONFIG_SITE.Common.$(T_A)
+ -include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+

configure/CONFIG_SITE

@@ -0,0 +1,33 @@
+# CONFIG_SITE
+
+# Make any application-specific changes to the EPICS build
+#   configuration variables in this file.
+#
+# Host/target specific settings can be specified in files named
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+#   CONFIG_SITE.Common.$(T_A)
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+
+# CHECK_RELEASE controls the consistency checking of the support
+#   applications pointed to by the RELEASE* files.
+# Normally CHECK_RELEASE should be set to YES.
+# Set CHECK_RELEASE to NO to disable checking completely.
+# Set CHECK_RELEASE to WARN to perform consistency checking but
+#   continue building anyway if conflicts are found.
+CHECK_RELEASE = YES
+
+# Set this when you only want to compile this application
+#   for a subset of the cross-compiled target architectures
+#   that Base is built for.
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040
+
+# To install files into a location other than $(TOP) define
+#   INSTALL_LOCATION here.
+INSTALL_LOCATION=/usr/local/epics/sinqApp
+
+# Set this when your IOC and the host use different paths
+#   to access the application. This will be needed to boot
+#   from a Microsoft FTP server or with some NFS mounts.
+# You must rebuild in the iocBoot directory for this to
+#   take effect.
+#IOCS_APPL_TOP = </IOC/path/to/application/top>

configure/Makefile

@@ -0,0 +1,8 @@
+TOP=..
+
+include $(TOP)/configure/CONFIG
+
+TARGETS = $(CONFIG_TARGETS)
+CONFIGS += $(subst ../,,$(wildcard $(CONFIG_INSTALLS)))
+
+include $(TOP)/configure/RULES

configure/RELEASE

@@ -0,0 +1,36 @@
+# RELEASE - Location of external support modules
+#
+# IF YOU MAKE ANY CHANGES to this file you must subsequently
+# do a "gnumake rebuild" in this application's top level
+# directory.
+#
+# The build process does not check dependencies against files
+# that are outside this application, thus you should do a
+# "gnumake rebuild" in the top level directory after EPICS_BASE
+# or any other external module pointed to below is rebuilt.
+#
+# Host- or target-specific settings can be given in files named
+#  RELEASE.$(EPICS_HOST_ARCH).Common
+#  RELEASE.Common.$(T_A)
+#  RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+#
+# This file should ONLY define paths to other support modules,
+# or include statements that pull in similar RELEASE files.
+# Build settings that are NOT module paths should appear in a
+# CONFIG_SITE file.
+
+TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top
+
+# If using the sequencer, point SNCSEQ at its top directory:
+#SNCSEQ=$(EPICS_BASE)/../modules/soft/seq
+
+# EPICS_BASE usually appears last so other apps can override stuff:
+EPICS_BASE=/usr/local/epics
+
+# Set RULES here if you want to take build rules from somewhere
+# other than EPICS_BASE:
+#RULES=/path/to/epics/support/module/rules/x-y
+MOTOR=/usr/local/epics/support/motor-6-7
+ASYN=/usr/local/epics/support/asyn-4-18
+STD=/usr/local/epics/support/std-3-1
+ANC=/usr/local/epics/anc350v17

configure/RULES

@@ -0,0 +1,6 @@
+# RULES
+
+include $(CONFIG)/RULES
+
+# Library should be rebuilt because LIBOBJS may have changed.
+$(LIBNAME): ../Makefile

configure/RULES.ioc

@@ -0,0 +1,2 @@
+#RULES.ioc
+include $(CONFIG)/RULES.ioc

configure/RULES_DIRS

@@ -0,0 +1,2 @@
+#RULES_DIRS
+include $(CONFIG)/RULES_DIRS

configure/RULES_TOP

@@ -0,0 +1,3 @@
+#RULES_TOP
+include $(CONFIG)/RULES_TOP
+