Added an explanation how to build the patched motorBase library from GFA

README.md

@@ -197,6 +197,12 @@ All existing tags can be listed with `git tag` in the sinqMotor directory. Detai
 
 ### How to build it
 
-The makefile in the top directory includes all necessary steps for compiling a shared library together with the header files into `/ioc/modules` (using the PSI EPICS build system). Therefore it is sufficient to clone this repository to a suitable location (`git clone https://git.psi.ch/sinq-epics-modules/sinqmotor/-/tree/main`). Afterwards, switch to the directory (`cd sinqmotor`) and run `make install`.
+This library is based on the PSI version of the EPICS motor record, which can be found here: `https://git.psi.ch/epics_driver_modules/motorBase`. We use a branch with a bugfix which is currently not merged into master due to resistance of the PSI userbase: `https://git.psi.ch/epics_driver_modules/motorBase/-/tree/pick_fix-lockup-VAL-HOMF-VAL`. This library can be build with the following steps, assuming GCC and make are available:
+- `git clone https://git.psi.ch/epics_driver_modules/motorBase/-/tree/pick_fix-lockup-VAL-HOMF-VAL`
+- `cd motorBase`
+- `git tag 7.2.2`. The latest version on master is currently 7.2.1, hence we increment the bugfix version counter by one
+- `make install`
+
+To build sinqMotor itself, the makefile in the top directory includes all necessary steps for compiling a shared library together with the header files into `/ioc/modules` (using the PSI EPICS build system). Therefore it is sufficient to clone this repository to a suitable location (`git clone https://git.psi.ch/sinq-epics-modules/sinqmotor/-/tree/main`). Afterwards, switch to the directory (`cd sinqmotor`) and run `make install`.
 
 To use the library when writing a concrete motor driver, include it in the makefile of your application / library the same way as other libraries such as e.g. `asynMotor` by adding `REQUIRED+=sinqMotor` to your Makefile. The version can be specified with `sinqMotor_VERSION=x.x.x.`