36 lines
2.7 KiB
Batchfile
36 lines
2.7 KiB
Batchfile
require asyn
|
|
require stream
|
|
|
|
epicsEnvSet("$(NAME)_DAQ_HOST", "$(DAQ_IP):$(DAQ_PORT=2000)")
|
|
|
|
$(SET_SIM_MODE=#) $(SET_SIM_MODE) require misc
|
|
$(SET_SIM_MODE=#) $(SET_SIM_MODE) epicsEnvSet("$(NAME)_DAQ_HOST", "127.0.0.1:$(DAQ_PORT=2000)")
|
|
$(SET_SIM_MODE=#) $(SET_SIM_MODE) system "$(sinqDAQ_DIR)daq_sim.py $(DAQ_PORT=2000) 10 &"
|
|
# starting the python socket seems to take a while
|
|
# and need misc to use built in sleep command
|
|
$(SET_SIM_MODE=#) $(SET_SIM_MODE) sleep 3
|
|
|
|
epicsEnvSet("PROTO", "$(sinqDAQ_DB)daq.proto")
|
|
drvAsynIPPortConfigure("ASYN_$(NAME)", "$($(NAME)_DAQ_HOST)", 0, 0, 0)
|
|
dbLoadRecords("$(sinqDAQ_DB)daq_common.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNELS=10")
|
|
dbLoadRecords("$(sinqDAQ_DB)daq_2nd_gen.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNELS=10")
|
|
|
|
# Could also use substitions instead.
|
|
dbLoadRecords("$(sinqDAQ_DB)channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=1")
|
|
dbLoadRecords("$(sinqDAQ_DB)channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=2")
|
|
dbLoadRecords("$(sinqDAQ_DB)channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=3")
|
|
dbLoadRecords("$(sinqDAQ_DB)channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=4")
|
|
dbLoadRecords("$(sinqDAQ_DB)channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=5")
|
|
dbLoadRecords("$(sinqDAQ_DB)channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=6")
|
|
dbLoadRecords("$(sinqDAQ_DB)channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=7")
|
|
dbLoadRecords("$(sinqDAQ_DB)channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=8")
|
|
dbLoadRecords("$(sinqDAQ_DB)channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=9")
|
|
dbLoadRecords("$(sinqDAQ_DB)channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=10")
|
|
|
|
dbLoadRecords("$(sinqDAQ_DB)gating_channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=1")
|
|
dbLoadRecords("$(sinqDAQ_DB)gating_channels.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME), CHANNEL=2")
|
|
|
|
$(LOAD_TEST_PVS=#) $(LOAD_TEST_PVS) dbLoadRecords("$(sinqDAQ_DB)daq_2nd_gen_test.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME)")
|
|
|
|
$(SET_SIM_MODE=#) $(SET_SIM_MODE) dbLoadRecords("$(sinqDAQ_DB)daq_simcontrol.db", "INSTR=$(INSTR), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=ASYN_$(NAME)")
|