lin-epics-modules/motorBase
0
0
Fork 0
forked from epics_driver_modules/motorBase
Code Pull Requests Activity
Files
98b6b675f9fb50e8a8b528f7dd3181dfd00a85f9
motorBase/motorApp/PiSrc/drvPIC844.cc
T
Ron Sluiter d581657cfd Eliminate compiler warnings.
2004-03-16 15:18:27 +00:00

683 lines
17 KiB
C++
Raw Blame History

/*
FILENAME... drvPIC844.cc
USAGE... Motor record driver level support for Physik Instrumente (PI)
GmbH & Co. C-844 motor controller.
Version: $Revision: 1.4 $
Modified By: $Author: sluiter $
Last Modified: $Date: 2004-03-16 15:18:27 $
*/
/*
* Original Author: Ron Sluiter
* Date: 12/17/03
*
* Experimental Physics and Industrial Control System (EPICS)
*
* Copyright 1991, the Regents of the University of California,
* and the University of Chicago Board of Governors.
*
* This software was produced under U.S. Government contracts:
* (W-7405-ENG-36) at the Los Alamos National Laboratory,
* and (W-31-109-ENG-38) at Argonne National Laboratory.
*
* Initial development by:
* The Controls and Automation Group (AT-8)
* Ground Test Accelerator
* Accelerator Technology Division
* Los Alamos National Laboratory
*
* Co-developed with
* The Controls and Computing Group
* Accelerator Systems Division
* Advanced Photon Source
* Argonne National Laboratory
*
* Modification Log:
* -----------------
* .01 12/17/03 rls - copied from drvIM483PL.cc
* .02 02/03/04 rls - Eliminate erroneous "Motor motion timeout ERROR".
*/
/*
DESIGN LIMITATIONS...
1 - Like all controllers, the PIC844 must be powered-on when EPICS is first
booted up.
2 - The PIC844 cannot be power cycled while EPICS is up and running. The
consequences are permanent communication lose with the PIC844 until
EPICS is rebooted.
*/
#include <string.h>
#include <epicsThread.h>
#include <drvSup.h>
#include "motor.h"
#include "drvPI.h"
#include "serialIO.h"
#include "epicsExport.h"
#define GET_IDENT "*IDN?"
#define PIC844_NUM_CARDS 8
#define MAX_AXES 8
#define BUFF_SIZE 100 /* Maximum length of string to/from PIC844 */
/*----------------debugging-----------------*/
#ifdef __GNUG__
#ifdef DEBUG
volatile int drvPIC844debug = 0;
#define Debug(l, f, args...) { if(l<=drvPIC844debug) printf(f,## args); }
#else
#define Debug(l, f, args...)
#endif
#else
#define Debug()
#endif
/* --- Local data. --- */
int PIC844_num_cards = 0;
static char PIC844_axis[4] = {'1', '2', '3', '4'};
/* Local data required for every driver; see "motordrvComCode.h" */
#include "motordrvComCode.h"
/*----------------functions-----------------*/
static int recv_mess(int, char *, int);
static RTN_STATUS send_mess(int card, char const *com, char c);
static int set_status(int card, int signal);
static long report(int level);
static long init();
static int motor_init();
static void query_done(int, int, struct mess_node *);
/*----------------functions-----------------*/
struct driver_table PIC844_access =
{
motor_init,
motor_send,
motor_free,
motor_card_info,
motor_axis_info,
&mess_queue,
&queue_lock,
&free_list,
&freelist_lock,
&motor_sem,
&motor_state,
&total_cards,
&any_motor_in_motion,
send_mess,
recv_mess,
set_status,
query_done,
NULL,
&initialized,
PIC844_axis
};
struct
{
long number;
long (*report) (int);
long (*init) (void);
} drvPIC844 = {2, report, init};
epicsExportAddress(drvet, drvPIC844);
static struct thread_args targs = {SCAN_RATE, &PIC844_access};
/*********************************************************
* Print out driver status report
*********************************************************/
static long report(int level)
{
int card;
if (PIC844_num_cards <=0)
printf(" No PIC844 controllers configured.\n");
else
{
for (card = 0; card < PIC844_num_cards; card++)
{
struct controller *brdptr = motor_state[card];
if (brdptr == NULL)
printf(" PIC844 controller %d connection failed.\n", card);
else
{
struct PIC844controller *cntrl;
cntrl = (struct PIC844controller *) brdptr->DevicePrivate;
switch (cntrl->port_type)
{
case RS232_PORT:
printf(" PIC844 controller %d port type = RS-232, id: %s \n",
card,
brdptr->ident);
break;
default:
printf(" PIC844 controller %d port type = Unknown, id: %s \n",
card,
brdptr->ident);
break;
}
}
}
}
return(OK);
}
static long init()
{
/*
* We cannot call motor_init() here, because that function can do GPIB I/O,
* and hence requires that the drvGPIB have already been initialized.
* That cannot be guaranteed, so we need to call motor_init from device
* support
*/
/* Check for setup */
if (PIC844_num_cards <= 0)
{
Debug(1, "init(): PIC844 driver disabled. PIC844Setup() missing from startup script.\n");
}
return((long) 0);
}
static void query_done(int card, int axis, struct mess_node *nodeptr)
{
}
/********************************************************************************
* *
* FUNCTION NAME: set_status *
* *
* LOGIC: *
* Initialize. *
* Send "Moving Status" query. *
* Read response. *
* IF normal response to query. *
* Set communication status to NORMAL. *
* ELSE *
* IF communication status is NORMAL. *
* Set communication status to RETRY. *
* NORMAL EXIT. *
* ELSE *
* Set communication status error. *
* ERROR EXIT. *
* ENDIF *
* ENDIF *
* *
* IF "Moving Status" indicates any motion (i.e. status != 0). *
* Clear "Done Moving" status bit. *
* ELSE *
* Set "Done Moving" status bit. *
* ENDIF *
* *
* *
********************************************************************************/
static int set_status(int card, int signal)
{
struct PIC844controller *cntrl;
struct mess_node *nodeptr;
register struct mess_info *motor_info;
/* Message parsing variables */
char buff[BUFF_SIZE];
C844_Cond_Reg mstat;
int rtn_state;
double motorData;
bool plusdir, ls_active = false, inmotion, plusLS, minusLS;
msta_field status;
cntrl = (struct PIC844controller *) motor_state[card]->DevicePrivate;
motor_info = &(motor_state[card]->motor_info[signal]);
nodeptr = motor_info->motor_motion;
status.All = motor_info->status.All;
send_mess(card, "AXIS:STAT?", PIC844_axis[signal]);
recv_mess(card, buff, 1);
if (strcmp(buff, "ON") == 0)
status.Bits.EA_POSITION = 1;
else if (strcmp(buff, "OFF") == 0)
status.Bits.EA_POSITION = 0;
else
{
if (cntrl->status == NORMAL)
{
cntrl->status = RETRY;
rtn_state = 0;
}
else
{
cntrl->status = COMM_ERR;
status.Bits.CNTRL_COMM_ERR = 1;
status.Bits.RA_PROBLEM = 1;
rtn_state = 1;
}
goto exit;
}
cntrl->status = NORMAL;
status.Bits.CNTRL_COMM_ERR = 0;
send_mess(card, "MOT:COND?", (char) NULL);
recv_mess(card, buff, 1);
mstat.All = atoi(&buff[0]);
switch(signal)
{
case 0:
inmotion = mstat.Bits.axis1IM;
break;
case 1:
inmotion = mstat.Bits.axis2IM;
break;
case 2:
inmotion = mstat.Bits.axis3IM;
break;
case 3:
inmotion = mstat.Bits.axis4IM;
default:
rtn_state = 1;
goto exit;
}
status.Bits.RA_DONE = (inmotion == YES) ? 0 : 1;
/*
* Parse motor position
* Position string format: 1TP5.012,2TP1.123,3TP-100.567,...
* Skip to substring for this motor, convert to double
*/
send_mess(card, "CURR:TPOS?", (char) NULL);
recv_mess(card, buff, 1);
motorData = atof(buff);
if (motorData == motor_info->position)
{
if (nodeptr != 0) /* Increment counter only if motor is moving. */
motor_info->no_motion_count++;
}
else
{
epicsInt32 newposition;
newposition = NINT(motorData);
status.Bits.RA_DIRECTION = (newposition >= motor_info->position) ? 1 : 0;
motor_info->position = newposition;
motor_info->no_motion_count = 0;
}
plusdir = (status.Bits.RA_DIRECTION) ? true : false;
switch(signal)
{
case 0:
plusLS = mstat.Bits.axis1PL;
minusLS = mstat.Bits.axis1ML;
break;
case 1:
plusLS = mstat.Bits.axis2PL;
minusLS = mstat.Bits.axis2ML;
break;
case 2:
plusLS = mstat.Bits.axis3PL;
minusLS = mstat.Bits.axis3ML;
break;
case 3:
plusLS = mstat.Bits.axis4PL;
minusLS = mstat.Bits.axis4ML;
default:
rtn_state = 1;
goto exit;
}
/* Set limit switch error indicators. */
if (plusLS == true)
{
status.Bits.RA_PLUS_LS = 1;
if (plusdir == true)
ls_active = true;
}
else
status.Bits.RA_PLUS_LS = 0;
if (minusLS == true)
{
status.Bits.RA_MINUS_LS = 1;
if (plusdir == false)
ls_active = true;
}
else
status.Bits.RA_MINUS_LS = 0;
/* encoder status */
status.Bits.EA_SLIP = 0;
status.Bits.EA_SLIP_STALL = 0;
status.Bits.EA_HOME = 0;
send_mess(card, "AXIS:POS?", (char) NULL);
recv_mess(card, buff, 1);
motorData = atof(buff);
motor_info->encoder_position = (int32_t) motorData;
status.Bits.RA_PROBLEM = 0;
/* Parse motor velocity? */
/* NEEDS WORK */
motor_info->velocity = 0;
if (!status.Bits.RA_DIRECTION)
motor_info->velocity *= -1;
rtn_state = (!motor_info->no_motion_count || ls_active == true ||
status.Bits.RA_DONE | status.Bits.RA_PROBLEM) ? 1 : 0;
/* Test for post-move string. */
if ((status.Bits.RA_DONE || ls_active == true) && nodeptr != 0 &&
nodeptr->postmsgptr != 0)
{
strcpy(buff, nodeptr->postmsgptr);
send_mess(card, buff, (char) NULL);
nodeptr->postmsgptr = NULL;
}
exit:
motor_info->status.All = status.All;
return(rtn_state);
}
/*****************************************************/
/* send a message to the PIC844 board */
/* send_mess() */
/*****************************************************/
static RTN_STATUS send_mess(int card, char const *com, char inchar)
{
char local_buff[MAX_MSG_SIZE];
struct PIC844controller *cntrl;
int size;
size = strlen(com);
if (size > MAX_MSG_SIZE)
{
errlogMessage("drvPIC844.cc:send_mess(); message size violation.\n");
return(ERROR);
}
else if (size == 0) /* Normal exit on empty input message. */
return(OK);
if (!motor_state[card])
{
errlogPrintf("drvPIC844.cc:send_mess() - invalid card #%d\n", card);
return(ERROR);
}
local_buff[0] = (char) NULL; /* Terminate local buffer. */
if (inchar != (char) NULL)
{
strcpy(local_buff, "AXIS ");
local_buff[5] = inchar; /* put in axis. */
local_buff[6] = (char) NULL;
strcat(local_buff, ";"); /* put in comman seperator. */
}
/* Make a local copy of the string and add the command line terminator. */
strcat(local_buff, com);
strcat(local_buff, "\n");
Debug(2, "send_mess(): message = %s\n", local_buff);
cntrl = (struct PIC844controller *) motor_state[card]->DevicePrivate;
if (cntrl->port_type == GPIB_PORT)
;
// gpibIOSend(cntrl->gpibInfo, local_buff, strlen(local_buff), GPIB_TIMEOUT);
else
cntrl->serialInfo->serialIOSend(local_buff, strlen(local_buff), SERIAL_TIMEOUT);
return(OK);
}
/*****************************************************/
/* receive a message from the PIC844 board */
/* recv_mess() */
/*****************************************************/
static int recv_mess(int card, char *com, int flag)
{
struct PIC844controller *cntrl;
int timeout;
int len=0;
/* Check that card exists */
if (!motor_state[card])
return(ERROR);
cntrl = (struct PIC844controller *) motor_state[card]->DevicePrivate;
if (flag == FLUSH)
timeout = 0;
else
timeout = SERIAL_TIMEOUT;
switch (cntrl->port_type)
{
case GPIB_PORT:
if (flag != FLUSH)
timeout = GPIB_TIMEOUT;
// len = gpibIORecv(cntrl->gpibInfo, com, BUFF_SIZE, (char *) "\n", timeout);
break;
case RS232_PORT:
if (flag != FLUSH)
timeout = SERIAL_TIMEOUT;
len = cntrl->serialInfo->serialIORecv(com, BUFF_SIZE, (char *) "\n", timeout);
break;
}
if (len == 0)
com[0] = '\0';
else
{
com[len - 1] = '\0';
len -= 1;
}
Debug(2, "recv_mess(): message = \"%s\"\n", com);
return(len);
}
/*****************************************************/
/* Setup system configuration */
/* PIC844Setup() */
/*****************************************************/
RTN_STATUS
PIC844Setup(int num_cards, /* maximum number of controllers in system. */
int num_channels, /* NOT Used. */
int scan_rate) /* polling rate - 1/60 sec units. */
{
int itera;
if (num_cards < 1 || num_cards > PIC844_NUM_CARDS)
PIC844_num_cards = PIC844_NUM_CARDS;
else
PIC844_num_cards = num_cards;
/* Set motor polling task rate */
if (scan_rate >= 1 && scan_rate <= 60)
targs.motor_scan_rate = scan_rate;
else
targs.motor_scan_rate = SCAN_RATE;
/*
* Allocate space for motor_state structures. Note this must be done
* before PIC844Config is called, so it cannot be done in motor_init()
* This means that we must allocate space for a card without knowing
* if it really exists, which is not a serious problem
*/
motor_state = (struct controller **) malloc(PIC844_num_cards *
sizeof(struct controller *));
for (itera = 0; itera < PIC844_num_cards; itera++)
motor_state[itera] = (struct controller *) NULL;
return(OK);
}
/*****************************************************/
/* Configure a controller */
/* PIC844Config() */
/*****************************************************/
RTN_STATUS
PIC844Config(int card, /* card being configured */
int port_type, /* GPIB_PORT or RS232_PORT */
int location, /* MPF server location */
const char *name) /* MPF server task name */
{
struct PIC844controller *cntrl;
if (card < 0 || card >= PIC844_num_cards)
return (ERROR);
motor_state[card] = (struct controller *) malloc(sizeof(struct controller));
motor_state[card]->DevicePrivate = malloc(sizeof(struct PIC844controller));
cntrl = (struct PIC844controller *) motor_state[card]->DevicePrivate;
switch (port_type)
{
/*
case GPIB_PORT:
cntrl->port_type = port_type;
cntrl->gpib_link = location;
cntrl->gpib_address = addr2;
break;
*/
case RS232_PORT:
cntrl->port_type = port_type;
cntrl->serial_card = location;
strcpy(cntrl->serial_task, name);
break;
default:
return (ERROR);
}
return(OK);
}
/*****************************************************/
/* initialize all software and hardware */
/* This is called from the initialization routine in */
/* device support. */
/* motor_init() */
/*****************************************************/
static int motor_init()
{
struct controller *brdptr;
struct PIC844controller *cntrl;
int card_index, motor_index;
char buff[BUFF_SIZE];
int total_axis;
int status;
bool success_rtn;
initialized = true; /* Indicate that driver is initialized. */
/* Check for setup */
if (PIC844_num_cards <= 0)
return(ERROR);
for (card_index = 0; card_index < PIC844_num_cards; card_index++)
{
if (!motor_state[card_index])
continue;
brdptr = motor_state[card_index];
brdptr->ident[0] = (char) NULL; /* No controller identification message. */
brdptr->cmnd_response = false;
total_cards = card_index + 1;
cntrl = (struct PIC844controller *) brdptr->DevicePrivate;
/* Initialize communications channel */
success_rtn = false;
switch (cntrl->port_type)
{
/*
case GPIB_PORT:
cntrl->gpibInfo = gpibIOInit(cntrl->gpib_link,
cntrl->gpib_address);
if (cntrl->gpibInfo == NULL)
success_rtn = true;
break;
*/
case RS232_PORT:
cntrl->serialInfo = new serialIO(cntrl->serial_card,
cntrl->serial_task, &success_rtn);
break;
}
if (success_rtn == true)
{
/* Send a message to the board, see if it exists */
/* flush any junk at input port - should not be any data available */
do
recv_mess(card_index, buff, FLUSH);
while (strlen(buff) != 0);
send_mess(card_index, GET_IDENT, (char) NULL);
status = recv_mess(card_index, buff, 1);
}
if (success_rtn == true && status > 0)
{
strcpy(brdptr->ident, &buff[0]);
brdptr->localaddr = (char *) NULL;
brdptr->motor_in_motion = 0;
brdptr->total_axis = total_axis = 4;
for (motor_index = 0; motor_index < total_axis; motor_index++)
{
struct mess_info *motor_info = &brdptr->motor_info[motor_index];
motor_info->status.All = 0;
motor_info->no_motion_count = 0;
motor_info->encoder_position = 0;
motor_info->position = 0;
brdptr->motor_info[motor_index].motor_motion = NULL;
/* PIC844 has DC motor support only */
motor_info->encoder_present = YES;
motor_info->status.Bits.EA_PRESENT = 1;
motor_info->pid_present = YES;
motor_info->status.Bits.GAIN_SUPPORT = 1;
set_status(card_index, motor_index); /* Read status of each motor */
}
}
else
motor_state[card_index] = (struct controller *) NULL;
}
any_motor_in_motion = 0;
mess_queue.head = (struct mess_node *) NULL;
mess_queue.tail = (struct mess_node *) NULL;
free_list.head = (struct mess_node *) NULL;
free_list.tail = (struct mess_node *) NULL;
epicsThreadCreate((char *) "PIC844_motor", 64, 5000, (EPICSTHREADFUNC) motor_task, (void *) &targs);
return(OK);
}
View Git Blame Copy Permalink