lin-epics-modules/motorBase
0
0
Fork 0
forked from epics_driver_modules/motorBase
Code Pull Requests Activity
Files
892225f1fcf9f843a27d492b675fffa8aae87c0a
motorBase/motorApp/AMCISrc/ANF2Driver.cpp
T
kpetersn 892225f1fc Cleaned up the setPosition method
2018-03-22 15:09:58 -05:00

858 lines
29 KiB
C++
Raw Blame History

/*
FILENAME... ANF2Driver.cpp
USAGE... Motor record driver support for the AMCI ANF2 stepper motor controller over Modbus/TCP.
Kevin Peterson
Based on the AMCI ANG1 Model 3 device driver written by Kurt Goetze
*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <math.h>
#include <errno.h>
#include <iocsh.h>
#include <epicsThread.h>
#include <epicsString.h>
#include <asynInt32SyncIO.h>
#include "ANF2Driver.h"
#include <epicsExport.h>
#define NINT(f) (int)((f)>0 ? (f)+0.5 : (f)-0.5)
static const char *driverName = "ANF2MotorDriver";
/** Constructor, Creates a new ANF2Controller object.
* \param[in] portName The name of the asyn port that will be created for this driver
* \param[in] ANF2InPortName The name of the drvAsynSerialPort that was created previously to connect to the ANF2 controller
* \param[in] ANF2OutPortName The name of the drvAsynSerialPort that was created previously to connect to the ANF2 controller
* \param[in] numAxes The number of axes that this controller supports
* \param[in] movingPollPeriod The time between polls when any axis is moving
* \param[in] idlePollPeriod The time between polls when no axis is moving
*/
ANF2Controller::ANF2Controller(const char *portName, const char *ANF2InPortName, const char *ANF2OutPortName, int numAxes,
double movingPollPeriod, double idlePollPeriod)
: asynMotorController(portName, numAxes, NUM_ANF2_PARAMS,
asynInt32ArrayMask, // One additional interface beyond those in base class
asynInt32ArrayMask, // One additional callback interface beyond those in base class
ASYN_CANBLOCK | ASYN_MULTIDEVICE,
1, // autoconnect
0, 0) // Default priority and stack size
{
int i, j;
asynStatus status = asynSuccess;
static const char *functionName = "ANF2Controller::ANF2Controller";
// Keep track of the number of axes created, so the poller can wait for all the axes to be created before starting
axesCreated_ = 0;
inputDriver_ = epicsStrDup(ANF2InPortName); // Set this before calls to create Axis objects
// Create controller-specific parameters
createParam(ANF2GetInfoString, asynParamInt32, &ANF2GetInfo_);
createParam(ANF2ReconfigString, asynParamInt32, &ANF2Reconfig_);
if (numAxes > MAX_AXES) {
numAxes = MAX_AXES;
}
for (j=0; j<numAxes; j++) {
/* Connect to ANF2 controller */
for (i=0; i<MAX_INPUT_REGS; i++) {
status = pasynInt32SyncIO->connect(ANF2InPortName, i+j*AXIS_REG_OFFSET, &pasynUserInReg_[j][i], NULL);
}
for (i=0; i<MAX_OUTPUT_REGS; i++) {
status = pasynInt32SyncIO->connect(ANF2OutPortName, i+j*AXIS_REG_OFFSET, &pasynUserOutReg_[j][i], NULL);
// Maybe send the outputs with Array calls in the future
//status = pasynInt32ArraySyncIO->connect(ANF2OutPortName, i, &pasynUserOutArrayReg_[j][i], NULL);
}
}
if (status) {
asynPrint(this->pasynUserSelf, ASYN_TRACE_ERROR,
"%s: cannot connect to ANF2 controller\n",
functionName);
}
/* Create the poller thread for this controller (do 2 forced-fast polls)
* NOTE: at this point the axis objects don't yet exist, but the poller tolerates this */
startPoller(movingPollPeriod, idlePollPeriod, 2);
}
/** Creates a new ANF2Controller object.
* Configuration command, called directly or from iocsh
* \param[in] portName The name of the asyn port that will be created for this driver
* \param[in] ANF2InPortName The name of the drvAsynIPPPort that was created previously to connect to the ANF2 controller
* \param[in] ANF2OutPortName The name of the drvAsynIPPPort that was created previously to connect to the ANF2 controller
* \param[in] numAxes The number of axes that this controller supports
* \param[in] movingPollPeriod The time in ms between polls when any axis is moving
* \param[in] idlePollPeriod The time in ms between polls when no axis is moving
*/
extern "C" int ANF2CreateController(const char *portName, const char *ANF2InPortName, const char *ANF2OutPortName, int numAxes,
int movingPollPeriod, int idlePollPeriod)
{
/*
ANF2Controller *pANF2Controller
= new ANF2Controller(portName, ANF2InPortName, ANF2OutPortName, numAxes, movingPollPeriod/1000., idlePollPeriod/1000.);
pANF2Controller = NULL;
*/
new ANF2Controller(portName, ANF2InPortName, ANF2OutPortName, numAxes, movingPollPeriod/1000., idlePollPeriod/1000.);
return(asynSuccess);
}
/** Reports on status of the driver
* \param[in] fp The file pointer on which report information will be written
* \param[in] level The level of report detail desired
*
* If details > 0 then information is printed about each axis.
* After printing controller-specific information it calls asynMotorController::report()
*/
void ANF2Controller::report(FILE *fp, int level)
{
int i, j;
fprintf(fp, "ANF2 motor driver %s, numAxes=%d, moving poll period=%f, idle poll period=%f\n",
this->portName, numAxes_, movingPollPeriod_, idlePollPeriod_);
fprintf(fp, " axesCreated=%i\n", axesCreated_);
for (j=0; j<MAX_AXES; j++) {
fprintf(fp, " axis #%i\n", j);
for (i=0; i<MAX_INPUT_REGS; i++) {
fprintf(fp, " reg %i, pasynUserInReg_[%i][%i]=0x%x, pasynUserOutReg_[%i][%i]=0x%x\n", i, j, i, pasynUserInReg_[j][i], j, i, pasynUserOutReg_[j][i]);
}
}
// Call the base class method
asynMotorController::report(fp, level);
}
/** Returns a pointer to an ANF2Axis object.
* Returns NULL if the axis number encoded in pasynUser is invalid.
* \param[in] pasynUser asynUser structure that encodes the axis index number. */
ANF2Axis* ANF2Controller::getAxis(asynUser *pasynUser)
{
// ? return static_cast<ANF2Axis*>(asynMotorController::getAxis(pANF2Axis methodsasynUser));
return static_cast<ANF2Axis*>(asynMotorController::getAxis(pasynUser));
}
/** Returns a pointer to an ANF2Axis object.
* Returns NULL if the axis number encoded in pasynUser is invalid.
* \param[in] No Axis index number. */
ANF2Axis* ANF2Controller::getAxis(int axisNo)
{
return static_cast<ANF2Axis*>(asynMotorController::getAxis(axisNo));
}
/** Called when asyn clients call pasynInt32->write().
* Extracts the function and axis number from pasynUser.
* Sets the value in the parameter library (?)
*
* If the function is ANF2Jerk_ it sets the jerk value in the controller.
* Calls any registered callbacks for this pasynUser->reason and address.
*
* For all other functions it calls asynMotorController::writeInt32.
* \param[in] pasynUser asynUser structure that encodes the reason and address.
* \param[in] value Value to write. */
asynStatus ANF2Controller::writeInt32(asynUser *pasynUser, epicsInt32 value)
{
int function = pasynUser->reason;
asynStatus status = asynSuccess;
ANF2Axis *pAxis = getAxis(pasynUser);
static const char *functionName = "writeInt32";
/* Set the parameter and readback in the parameter library. */
status = setIntegerParam(pAxis->axisNo_, function, value);
if (function == ANF2GetInfo_)
{
// Only get info when value is 1
if (value == 1) {
printf("ANF2Controller:writeInt32: Getting info for axis = %d\n", pAxis->axisNo_);
pAxis->getInfo();
}
} else if (function == ANF2Reconfig_)
{
// reconfig regardless of the value
pAxis->reconfig();
} else {
// Call base class method
status = asynMotorController::writeInt32(pasynUser, value);
}
// Call base class method
status = asynMotorController::writeInt32(pasynUser, value);
/* Do callbacks so higher layers see any changes */
pAxis->callParamCallbacks();
if (status)
asynPrint(pasynUser, ASYN_TRACE_ERROR,
"%s:%s: error, status=%d function=%d, value=%d\n",
driverName, functionName, status, function, value);
else
asynPrint(pasynUser, ASYN_TRACEIO_DRIVER,
"%s:%s: function=%d, value=%d\n",
driverName, functionName, function, value);
return status;
}
asynStatus ANF2Controller::writeReg16(int axisNo, int axisReg, int output, double timeout)
{
asynStatus status;
//printf("writeReg16: writing %d to register %d\n", output, axisReg);
asynPrint(this->pasynUserSelf, ASYN_TRACEIO_DRIVER,"writeReg16: writing %d to register %d\n", output, axisReg);
status = pasynInt32SyncIO->write(pasynUserOutReg_[axisNo][axisReg], output, timeout);
//status = pasynInt32ArraySyncIO->write(pasynUserOutArrayReg_[axisNo][axisReg], &output, 1, timeout);
epicsThreadSleep(0.01);
return status ;
}
// This could be useful in the future, but it isn't needed yet
/*asynStatus ANF2Controller::writeReg32Array(int axisNo, int axisReg, epicsInt32* output, int nElements, double timeout)
{
asynStatus status;
asynPrint(this->pasynUserSelf, ASYN_TRACEIO_DRIVER,"writeReg32Array: writing %d elements starting at register %d\n", nElements, axisReg);
status = pasynInt32ArraySyncIO->write(pasynUserOutArrayReg_[axisNo][axisReg], output, nElements, timeout);
return status ;
}*/
asynStatus ANF2Controller::writeReg32(int axisNo, int axisReg, int output, double timeout)
{
//.. break 32-bit integer into 2 pieces
//.. write the pieces into ANF2 registers
asynStatus status;
int lower,upper;
// This is the way the ANG1 driver does it, and the code doesn't appear to work
/*float fnum;
fnum = (output / 1000.0);
upper = (int)fnum;
fnum = fnum - upper;
fnum = NINT(fnum * 1000);
lower = (int)fnum;*/
upper = (output >> 16) & 0x0000FFFF;
lower = output & 0x0000FFFF;
printf("upper = 0x%x\t= %i\n", upper, upper);
printf("lower = 0x%x\t= %i\n", lower, lower);
// writeReg16(piece1 ie MSW ...
status = writeReg16(axisNo, axisReg, upper, DEFAULT_CONTROLLER_TIMEOUT);
// writeReg16(piece2 ie LSW ...
axisReg++;
status = writeReg16(axisNo, axisReg, lower, DEFAULT_CONTROLLER_TIMEOUT);
// No breaking up the output value required when writing an array - maybe do this in the future
//status = pasynInt32ArraySyncIO->write(pasynUserOutArrayReg_[axisNo][axisReg], &output, 2, timeout);
return status ;
}
asynStatus ANF2Controller::readReg16(int axisNo, int axisReg, epicsInt32 *input, double timeout)
{
asynStatus status;
//printf("axisReg = %d\n", axisReg);
asynPrint(this->pasynUserSelf, ASYN_TRACEIO_DRIVER,"readReg16 reg = %d\n", axisReg);
status = pasynInt32SyncIO->read(pasynUserInReg_[axisNo][axisReg], input, timeout);
return status ;
}
asynStatus ANF2Controller::readReg32(int axisNo, int axisReg, epicsInt32 *combo, double timeout)
{
asynStatus status;
epicsInt32 lowerWord32, upperWord32; // only have pasynInt32SyncIO, not pasynInt16SyncIO ,
//printf("calling readReg16\n");
status = readReg16(axisNo, axisReg, &upperWord32, timeout); //get Upper Word
axisReg++;
status = readReg16(axisNo, axisReg, &lowerWord32, timeout); //get Lower Word
*combo = NINT((upperWord32 << 16) | lowerWord32);
return status ;
}
// ANF2Axis methods Here
// These are the ANF2Axis methods
/** Creates a new ANF2Axis object.
* \param[in] pC Pointer to the ANF2Controller to which this axis belongs.
* \param[in] axisNo Index number of this axis, range 0 to pC->numAxes_-1.
*
* Initializes register numbers, etc.
*/
ANF2Axis::ANF2Axis(ANF2Controller *pC, const char *ANF2ConfName, int axisNo, epicsInt32 config)
: asynMotorAxis(pC, axisNo),
pC_(pC)
{
int status;
axisNo_ = axisNo;
//this->axisNo_ = axisNo;
zeroRegisters(confReg_);
status = pasynInt32SyncIO->connect(pC_->inputDriver_, axisNo_*AXIS_REG_OFFSET, &pasynUserForceRead_, "MODBUS_READ");
if (status) {
//printf("%s:%s: Error, unable to connect pasynUserForceRead_ to Modbus input driver %s\n", pC_->inputDriver_, pC_->functionName, myModbusInputDriver);
printf("%s: Error, unable to connect pasynUserForceRead_ to Modbus input driver\n", pC_->inputDriver_);
}
printf("ANF2Axis::ANF2Axis : pasynUserForceRead_->reason=%d\n", pasynUserForceRead_->reason);
status = pasynInt32ArraySyncIO->connect(ANF2ConfName, axisNo_*AXIS_REG_OFFSET, &pasynUserConfWrite_, NULL);
if (status) {
printf("%s: Error, unable to connect pasynUserConfWrite_ to Modbus input driver\n", ANF2ConfName);
}
printf("ANF2Axis::ANF2Axis : pasynUserConfWrite_->reason=%d\n", pasynUserConfWrite_->reason);
printf("ANF2Axis::ANF2Axis : pasynUserConfWrite_ offset=%d\n", axisNo_*AXIS_REG_OFFSET);
epicsThreadSleep(0.1);
// Read data that is likely to be stale
//getInfo();
// Send the configuration (array)
// assemble the configuration bits; set the start speed to a non-zero value (100), which is required for the configuration to be accepted
confReg_[CONFIGURATION] = config;
confReg_[BASE_SPEED] = 0x00000064;
// Write all the registers
status = pasynInt32ArraySyncIO->write(pasynUserConfWrite_, confReg_, 5, DEFAULT_CONTROLLER_TIMEOUT);
// Delay
epicsThreadSleep(0.05);
// Read the configuration? Or maybe the command registers?
//getInfo();
// set position to 0
setPosition(0);
// Delay
//epicsThreadSleep(1.0);
// Read the command registers
//getInfo();
// Tell the driver the axis has been created
pC_->axesCreated_ += 1;
}
/*
Configuration Bits:
0x1 - Caputure Input (0 = Disabled, 1 = Enabled)
0x2 - External Input (0 = Disabled, 1 = Enabled)
0x4 - Home Input (0 = Disabled, 1 = Enabled)
0x8 -
*/
extern "C" asynStatus ANF2CreateAxis(const char *ANF2Name, /* specify which controller by port name */
const char *ANF2ConfName, /* specify which config port name */
int axis, /* axis number 0-1 */
const char *hexConfig) /* desired configuration in hex */
{
ANF2Controller *pC;
epicsInt32 config;
static const char *functionName = "ANF2CreateAxis";
pC = (ANF2Controller*) findAsynPortDriver(ANF2Name);
if (!pC) {
printf("%s:%s: Error port %s not found\n",
driverName, functionName, ANF2Name);
return asynError;
}
errno = 0;
config = strtoul(hexConfig, NULL, 16);
if (errno != 0) {
printf("%s:%s: Error invalid config=%s\n",
driverName, functionName, hexConfig);
return asynError;
} else {
printf("%s:%s: Config=>%s=%x\n",
driverName, functionName, hexConfig, config);
}
pC->lock();
new ANF2Axis(pC, ANF2ConfName, axis, config);
pC->unlock();
return asynSuccess;
}
void ANF2Axis::zeroRegisters(epicsInt32 *reg)
{
int i;
for(i=0; i<5; i++)
{
reg[i] = 0x0;
}
}
void ANF2Axis::getInfo()
{
asynStatus status;
int i;
epicsInt32 read_val;
// For a read (not sure why this is necessary)
status = pasynInt32SyncIO->write(pasynUserForceRead_, 1, DEFAULT_CONTROLLER_TIMEOUT);
printf("Info for axis %i\n", axisNo_);
for( i=0; i<MAX_INPUT_REGS; i++)
{
status = pC_->readReg16(axisNo_, i, &read_val, DEFAULT_CONTROLLER_TIMEOUT);
printf(" status=%d, register=%i, val=0x%x\n", status, i, read_val);
}
}
void ANF2Axis::reconfig()
{
asynStatus status;
epicsInt32 confReg[5];
printf("Reconfiguring axis %i\n", axisNo_);
// The command/cfg register must first be zeroed
//reg = 0x0;
//status = pC_->writeReg16(axisNo_, CMD_MSW, reg, DEFAULT_CONTROLLER_TIMEOUT);
zeroRegisters(confReg);
// Clear the command/configuration register
status = pasynInt32ArraySyncIO->write(pasynUserConfWrite_, confReg, 5, DEFAULT_CONTROLLER_TIMEOUT);
// Construct the new config
confReg[CONFIGURATION] = 0x86000000;
confReg[BASE_SPEED] = 0x00000064;
//confReg[HOME_TIMEOUT] = 0x0;
//confReg[CONFIG_REG_3] = 0x0;
//confReg[CONFIG_REG_4] = 0x0;
epicsThreadSleep(2.0);
getInfo();
// Send the new config
status = pasynInt32ArraySyncIO->write(pasynUserConfWrite_, confReg, 5, DEFAULT_CONTROLLER_TIMEOUT);
epicsThreadSleep(2.0);
getInfo();
// Set the position to clear the invalid position error
setPosition(2048);
getInfo();
}
/** Reports on status of the axis
* \param[in] fp The file pointer on which report information will be written
* \param[in] level The level of report detail desired
*
* After printing device-specific information calls asynMotorAxis::report()
*/
void ANF2Axis::report(FILE *fp, int level)
{
if (level > 0) {
fprintf(fp, " axis %d\n", axisNo_);
fprintf(fp, " this->axisNo_ %i\n", this->axisNo_);
fprintf(fp, " this->config_ %x\n", this->config_);
fprintf(fp, " config_ %x\n", config_);
}
// Call the base class method
asynMotorAxis::report(fp, level);
}
// SET VEL & ACCEL
asynStatus ANF2Axis::sendAccelAndVelocity(double acceleration, double velocity)
{
// static const char *functionName = "ANF2::sendAccelAndVelocity";
// Set the velocity register
motionReg_[2] = NINT(velocity);
// ANF2 acceleration range 1 to 2000 steps/ms/sec
// Therefore need to limit range received by motor record from 1000 to 2e6 steps/sec/sec
if (acceleration < 1000) {
//printf("Acceleration is < 1000: %lf\n", acceleration);
acceleration = 1000;
}
if (acceleration > 2000000) {
//printf("Acceleration is > 2000: %lf\n", acceleration);
acceleration = 2000000;
}
// Set the accel/decel register
motionReg_[3] = (NINT(acceleration/1000.0) << 16) | (NINT(acceleration/1000.0));
return asynSuccess;
}
// MOVE
asynStatus ANF2Axis::move(double position, int relative, double minVelocity, double maxVelocity, double acceleration)
{
asynStatus status;
epicsInt32 distance;
printf(" ** ANF2Axis::move called, relative = %d, axisNo_ = %i\n", relative, this->axisNo_);
zeroRegisters(motionReg_);
// Clear the command/configuration register
status = pasynInt32ArraySyncIO->write(pasynUserConfWrite_, motionReg_, 5, DEFAULT_CONTROLLER_TIMEOUT);
epicsThreadSleep(0.05);
// This sets indices 2 & 3 of motionReg_
status = sendAccelAndVelocity(acceleration, maxVelocity);
if (relative) {
printf(" ** relative move called\n");
distance = NINT(position);
// Set position and cmd registers
motionReg_[1] = NINT(position);
motionReg_[0] = 0x2 << 16;
} else {
// absolute
printf(" ** absolute move called\n");
distance = NINT(position);
printf(" ** distance = %d\n", distance);
// Set position and cmd registers
motionReg_[1] = NINT(position);
motionReg_[0] = 0x1 << 16;
}
// The final registers are zero for absolute and relative moves
motionReg_[4] = 0x0;
// Write all the registers atomically
// The number of elements refers to the number of epicsInt32s registers_
status = pasynInt32ArraySyncIO->write(pasynUserConfWrite_, motionReg_, 5, DEFAULT_CONTROLLER_TIMEOUT);
// Delay the first status read, give the controller some time to return moving status
epicsThreadSleep(0.05);
return status;
}
// HOME (needs work)
asynStatus ANF2Axis::home(double minVelocity, double maxVelocity, double acceleration, int forwards)
{
asynStatus status;
int home_bit;
// static const char *functionName = "ANF2Axis::home";
//status = sendAccelAndVelocity(acceleration, maxVelocity);
if (forwards) {
printf(" ** HOMING FORWARDS **\n");
home_bit = 0x20;
status = pC_->writeReg16(axisNo_, CMD_MSW, home_bit, DEFAULT_CONTROLLER_TIMEOUT);
} else {
home_bit = 0x40;
status = pC_->writeReg16(axisNo_, CMD_MSW, home_bit, DEFAULT_CONTROLLER_TIMEOUT);
}
return status;
}
// JOG
asynStatus ANF2Axis::moveVelocity(double minVelocity, double maxVelocity, double acceleration)
{
asynStatus status;
int velo, distance, move_bit;
static const char *functionName = "ANF2Axis::moveVelocity";
asynPrint(pasynUser_, ASYN_TRACE_FLOW,
"%s: minVelocity=%f, maxVelocity=%f, acceleration=%f\n",
functionName, minVelocity, maxVelocity, acceleration);
velo = NINT(fabs(maxVelocity));
status = sendAccelAndVelocity(acceleration, velo);
/* ANF2 does not have jog command. Move 1 million steps */
if (maxVelocity > 0.) {
/* This is a positive move in ANF2 coordinates */
//printf(" ** relative move (JOG pos) called\n");
distance = 1000000;
status = pC_->writeReg32(axisNo_, POS_WR_UPR, distance, DEFAULT_CONTROLLER_TIMEOUT);
move_bit = 0x0;
status = pC_->writeReg16(axisNo_, CMD_MSW, move_bit, DEFAULT_CONTROLLER_TIMEOUT);
move_bit = 0x2;
status = pC_->writeReg16(axisNo_, CMD_MSW, move_bit, DEFAULT_CONTROLLER_TIMEOUT);
} else {
/* This is a negative move in ANF2 coordinates */
//printf(" ** relative move (JOG neg) called\n");
distance = -1000000;
status = pC_->writeReg32(axisNo_, POS_WR_UPR, distance, DEFAULT_CONTROLLER_TIMEOUT);
move_bit = 0x0;
status = pC_->writeReg16(axisNo_, CMD_MSW, move_bit, DEFAULT_CONTROLLER_TIMEOUT);
move_bit = 0x2;
status = pC_->writeReg16(axisNo_, CMD_MSW, move_bit, DEFAULT_CONTROLLER_TIMEOUT);
}
// Delay the first status read, give the controller some time to return moving status
epicsThreadSleep(0.05);
return status;
}
// STOP
asynStatus ANF2Axis::stop(double acceleration)
{
asynStatus status;
int stop_bit;
//static const char *functionName = "ANF2Axis::stop";
printf("\n STOP \n\n");
// do nothing (for testing)
//return asynSuccess;
stop_bit = 0x0;
status = pC_->writeReg16(axisNo_, CMD_MSW, stop_bit, DEFAULT_CONTROLLER_TIMEOUT);
// stop_bit = 0x10; Immediate stop
stop_bit = 0x4; // Hold move
status = pC_->writeReg16(axisNo_, CMD_MSW, stop_bit, DEFAULT_CONTROLLER_TIMEOUT);
return status;
}
// SET
asynStatus ANF2Axis::setPosition(double position)
{
asynStatus status;
int set_bit;
epicsInt32 set_position;
epicsInt32 posReg[5];
//static const char *functionName = "ANF2Axis::setPosition";
zeroRegisters(posReg);
// Clear the command/configuration register
status = pasynInt32ArraySyncIO->write(pasynUserConfWrite_, posReg, 5, DEFAULT_CONTROLLER_TIMEOUT);
epicsThreadSleep(0.05);
set_position = NINT(position);
posReg[0] = 0x200 << 16;
posReg[1] = set_position;
//posReg[2] = 0x0;
//posReg[3] = 0x0;
//posReg[4] = 0x0;
// Write all the registers atomically
status = pasynInt32ArraySyncIO->write(pasynUserConfWrite_, posReg, 5, DEFAULT_CONTROLLER_TIMEOUT);
//epicsThreadSleep(0.05);
// The ANG1 driver does this; do we need to?
//zeroRegisters(posReg);
// Clear the command/configuration register
//status = pasynInt32ArraySyncIO->write(pasynUserConfWrite_, posReg, 5, DEFAULT_CONTROLLER_TIMEOUT);
return status;
}
// ENABLE TORQUE
asynStatus ANF2Axis::setClosedLoop(bool closedLoop)
{
asynStatus status;
int enable = 0x8000;
int disable = 0x0000;
int cmd;
printf(" ** setClosedLoop called \n");
if (closedLoop) {
printf("setting enable %X\n", enable);
// Let's reset errors first
cmd = 0x0;
status = pC_->writeReg16(axisNo_, CMD_MSW, cmd, DEFAULT_CONTROLLER_TIMEOUT);
cmd = 0x400;
status = pC_->writeReg16(axisNo_, CMD_MSW, cmd, DEFAULT_CONTROLLER_TIMEOUT);
cmd = 0x0;
status = pC_->writeReg16(axisNo_, CMD_MSW, cmd, DEFAULT_CONTROLLER_TIMEOUT);
/*
status = pC_->writeReg16(axisNo_, CMD_LSW, enable, DEFAULT_CONTROLLER_TIMEOUT);
setIntegerParam(pC_->motorStatusPowerOn_, 1);
*/
} else {
printf("setting disable %X\n", disable);
status = pC_->writeReg16(axisNo_, CMD_LSW, disable, DEFAULT_CONTROLLER_TIMEOUT);
setIntegerParam(pC_->motorStatusPowerOn_, 0);
}
return status;
}
// POLL
/** Polls the axis.
* This function reads motor position, limit status, home status, and moving status
* It calls setIntegerParam() and setDoubleParam() for each item that it polls,
* and then calls callParamCallbacks() at the end.
* \param[out] moving A flag that is set indicating that the axis is moving (true) or done (false). */
asynStatus ANF2Axis::poll(bool *moving)
{
int done;
int limit;
int enabled;
double position;
asynStatus status;
epicsInt32 read_val; // don't use a pointer here. The _address_ of read_val should be passed to the read function.
// Don't do any polling until ALL the axes have been created; this ensures that we don't interpret the configuration values as command values
if (pC_->axesCreated_ != pC_->numAxes_) {
*moving = false;
return asynSuccess;
}
//getInfo();
// Force a read operation
//printf(" . . . . . Calling pasynInt32SyncIO->write\n");
//printf("Calling pasynInt32SyncIO->write(pasynUserForceRead_, 1, TIMEOUT), pasynUserForceRead_->reason=%d\n", pasynUserForceRead_->reason);
status = pasynInt32SyncIO->write(pasynUserForceRead_, 1, DEFAULT_CONTROLLER_TIMEOUT);
//printf(" . . . . . status = %d\n", status);
// if status goto end
//getInfo();
// Read the current motor position
//
//readReg32(int reg, epicsInt32 *combo, double timeout)
status = pC_->readReg32(axisNo_, POS_RD_UPR, &read_val, DEFAULT_CONTROLLER_TIMEOUT);
//printf("ANF2Axis::poll: Motor position raw: %d\n", read_val);
position = (double) read_val;
setDoubleParam(pC_->motorPosition_, position);
//printf("ANF2Axis::poll: Motor #%i position: %f\n", axisNo_, position);
// Read the moving status of this motor
//
status = pC_->readReg16(axisNo_, STATUS_1, &read_val, DEFAULT_CONTROLLER_TIMEOUT);
//printf("status 1 is 0x%X\n", read_val);
// Done logic
done = ((read_val & 0x8) >> 3); // status word 1 bit 3 set to 1 when the motor is not in motion.
setIntegerParam(pC_->motorStatusDone_, done);
*moving = done ? false:true;
//printf("done is %d\n", done);
// Read the limit status
//
status = pC_->readReg16(axisNo_, STATUS_2, &read_val, DEFAULT_CONTROLLER_TIMEOUT);
//printf("status 2 is 0x%X\n", read_val);
limit = (read_val & 0x8); // a cw limit has been reached
setIntegerParam(pC_->motorStatusHighLimit_, limit);
//printf("+limit %d\n", limit);
if (limit) { // reset error and set position so we can move off of the limit
// Reset error
setClosedLoop(1);
// Reset position
//printf(" Reset Position\n");
setPosition(position);
}
limit = (read_val & 0x10); // a ccw limit has been reached
setIntegerParam(pC_->motorStatusLowLimit_, limit);
//printf("-limit %d\n", limit);
if (limit) { // reset error and set position so we can move off of the limit
// Reset error
setClosedLoop(1);
// Reset position
setPosition(position);
}
// test for home
// Should be in init routine? Allows CNEN to be used.
setIntegerParam(pC_->motorStatusGainSupport_, 1);
// Check for the torque status and set accordingly.
// The ANG1 driver does the wrong thing for torque enable/disable
//enabled = (read_val & 0x8000);
enabled = 1;
if (enabled)
setIntegerParam(pC_->motorStatusPowerOn_, 1);
else
setIntegerParam(pC_->motorStatusPowerOn_, 0);
// Notify asynMotorController polling routine that we're ready
callParamCallbacks();
return status;
}
/** Code for iocsh registration */
/* ANF2CreateController */
static const iocshArg ANF2CreateControllerArg0 = {"Port name", iocshArgString};
static const iocshArg ANF2CreateControllerArg1 = {"ANF2 In port name", iocshArgString};
static const iocshArg ANF2CreateControllerArg2 = {"ANF2 Out port name", iocshArgString};
static const iocshArg ANF2CreateControllerArg3 = {"Number of axes", iocshArgInt};
static const iocshArg ANF2CreateControllerArg4 = {"Moving poll period (ms)", iocshArgInt};
static const iocshArg ANF2CreateControllerArg5 = {"Idle poll period (ms)", iocshArgInt};
static const iocshArg * const ANF2CreateControllerArgs[] = {&ANF2CreateControllerArg0,
&ANF2CreateControllerArg1,
&ANF2CreateControllerArg2,
&ANF2CreateControllerArg3,
&ANF2CreateControllerArg4,
&ANF2CreateControllerArg5,};
static const iocshFuncDef ANF2CreateControllerDef = {"ANF2CreateController", 6, ANF2CreateControllerArgs};
static void ANF2CreateControllerCallFunc(const iocshArgBuf *args)
{
ANF2CreateController(args[0].sval, args[1].sval, args[2].sval, args[3].ival, args[4].ival, args[5].ival);
}
/* ANF2CreateAxis */
static const iocshArg ANF2CreateAxisArg0 = {"Port name", iocshArgString};
static const iocshArg ANF2CreateAxisArg1 = {"Config port name", iocshArgString};
static const iocshArg ANF2CreateAxisArg2 = {"Axis number", iocshArgInt};
static const iocshArg ANF2CreateAxisArg3 = {"Hex config", iocshArgString};
static const iocshArg * const ANF2CreateAxisArgs[] = {&ANF2CreateAxisArg0,
&ANF2CreateAxisArg1,
&ANF2CreateAxisArg2,
&ANF2CreateAxisArg3};
static const iocshFuncDef ANF2CreateAxisDef = {"ANF2CreateAxis", 4, ANF2CreateAxisArgs};
static void ANF2CreateAxisCallFunc(const iocshArgBuf *args)
{
ANF2CreateAxis(args[0].sval, args[1].sval, args[2].ival, args[3].sval);
}
static void ANF2Register(void)
{
iocshRegister(&ANF2CreateControllerDef, ANF2CreateControllerCallFunc);
iocshRegister(&ANF2CreateAxisDef, ANF2CreateAxisCallFunc);
}
extern "C" {
epicsExportRegistrar(ANF2Register);
}
View Git Blame Copy Permalink