forked from epics_driver_modules/motorBase
jsullivan-anl
8c9053a842
Configured at startup via SPiiPlusConfig(0, "<asyn port>", "<command mode>") Where command mode = "BUF","CON" or "DIR" (see README file)
363 lines
9.3 KiB
C++
363 lines
9.3 KiB
C++
/*
|
|
FILENAME... devSPiiPlus.cc
|
|
USAGE... Motor record device level support for ACS Tech80 SPiiPlus
|
|
|
|
Version: $Revision: 1.3 $
|
|
Modified By: $Author: sullivan $
|
|
Last Modified: $Date: 2008-05-21 21:18:52 $
|
|
*/
|
|
|
|
/*
|
|
* Original Author: Mark Rivers
|
|
* Date: 10/20/97
|
|
*
|
|
* Experimental Physics and Industrial Control System (EPICS)
|
|
*
|
|
* Copyright 1991, the Regents of the University of California,
|
|
* and the University of Chicago Board of Governors.
|
|
*
|
|
* This software was produced under U.S. Government contracts:
|
|
* (W-7405-ENG-36) at the Los Alamos National Laboratory,
|
|
* and (W-31-109-ENG-38) at Argonne National Laboratory.
|
|
*
|
|
* Initial development by:
|
|
* The Controls and Automation Group (AT-8)
|
|
* Ground Test Accelerator
|
|
* Accelerator Technology Division
|
|
* Los Alamos National Laboratory
|
|
*
|
|
* Co-developed with
|
|
* The Controls and Computing Group
|
|
* Accelerator Systems Division
|
|
* Advanced Photon Source
|
|
* Argonne National Laboratory
|
|
*
|
|
* Modification Log:
|
|
* -----------------
|
|
* .01 04-07-05 jps initialized from devMM4000.cc
|
|
*/
|
|
|
|
|
|
#include <string.h>
|
|
#include <math.h>
|
|
#include "motorRecord.h"
|
|
#include "motor.h"
|
|
#include "motordevCom.h"
|
|
#include "drvSPiiPlus.h"
|
|
#include "epicsExport.h"
|
|
|
|
#define STATIC static
|
|
|
|
extern struct driver_table SPiiPlus_access;
|
|
|
|
/* ----------------Create the dsets for devSPiiPlus----------------- */
|
|
STATIC struct driver_table *drvtabptr;
|
|
STATIC long SPiiPlus_init(void *);
|
|
STATIC long SPiiPlus_init_record(void *);
|
|
STATIC long SPiiPlus_start_trans(struct motorRecord *);
|
|
STATIC RTN_STATUS SPiiPlus_build_trans(motor_cmnd, double *, struct motorRecord *);
|
|
STATIC RTN_STATUS SPiiPlus_end_trans(struct motorRecord *);
|
|
|
|
struct motor_dset devSPiiPlus =
|
|
{
|
|
{8, NULL, (DEVSUPFUN) SPiiPlus_init, (DEVSUPFUN) SPiiPlus_init_record, NULL},
|
|
motor_update_values,
|
|
SPiiPlus_start_trans,
|
|
SPiiPlus_build_trans,
|
|
SPiiPlus_end_trans
|
|
};
|
|
|
|
extern "C" {epicsExportAddress(dset,devSPiiPlus);}
|
|
|
|
/* --------------------------- program data --------------------- */
|
|
|
|
/* This table is used to define the command types */
|
|
/* WARNING! this must match "motor_cmnd" in motor.h */
|
|
|
|
static msg_types SPiiPlus_table[] = {
|
|
MOTION, /* MOVE_ABS */
|
|
MOTION, /* MOVE_REL */
|
|
MOTION, /* HOME_FOR */
|
|
MOTION, /* HOME_REV */
|
|
IMMEDIATE, /* LOAD_POS */
|
|
IMMEDIATE, /* SET_VEL_BASE */
|
|
IMMEDIATE, /* SET_VELOCITY */
|
|
IMMEDIATE, /* SET_ACCEL */
|
|
IMMEDIATE, /* GO */
|
|
IMMEDIATE, /* SET_ENC_RATIO */
|
|
INFO, /* GET_INFO */
|
|
MOVE_TERM, /* STOP_AXIS */
|
|
VELOCITY, /* JOG */
|
|
IMMEDIATE, /* SET_PGAIN */
|
|
IMMEDIATE, /* SET_IGAIN */
|
|
IMMEDIATE, /* SET_DGAIN */
|
|
IMMEDIATE, /* ENABLE_TORQUE */
|
|
IMMEDIATE, /* DISABL_TORQUE */
|
|
IMMEDIATE, /* PRIMITIVE */
|
|
IMMEDIATE, /* SET_HIGH_LIMIT */
|
|
IMMEDIATE, /* SET_LOW_LIMIT */
|
|
VELOCITY /* JOG_VELOCITY */
|
|
};
|
|
|
|
|
|
static struct board_stat **SPiiPlus_cards;
|
|
|
|
/* --------------------------- program data --------------------- */
|
|
|
|
|
|
/* initialize device support for SPiiPlus stepper motor */
|
|
STATIC long SPiiPlus_init(void *arg)
|
|
{
|
|
long rtnval;
|
|
int after = (arg == 0) ? 0 : 1;
|
|
|
|
if (after == 0)
|
|
{
|
|
drvtabptr = &SPiiPlus_access;
|
|
(drvtabptr->init)();
|
|
}
|
|
|
|
rtnval = motor_init_com(after, *drvtabptr->cardcnt_ptr, drvtabptr, &SPiiPlus_cards);
|
|
return(rtnval);
|
|
}
|
|
|
|
|
|
/* initialize a record instance */
|
|
STATIC long SPiiPlus_init_record(void *arg)
|
|
{
|
|
struct motorRecord *mr = (struct motorRecord *) arg;
|
|
|
|
return(motor_init_record_com(mr, *drvtabptr->cardcnt_ptr, drvtabptr, SPiiPlus_cards));
|
|
}
|
|
|
|
|
|
/* start building a transaction */
|
|
STATIC long SPiiPlus_start_trans(struct motorRecord *mr)
|
|
{
|
|
return(motor_start_trans_com(mr, SPiiPlus_cards));
|
|
}
|
|
|
|
|
|
/* end building a transaction */
|
|
STATIC RTN_STATUS SPiiPlus_end_trans(struct motorRecord *mr)
|
|
{
|
|
return(motor_end_trans_com(mr, drvtabptr));
|
|
}
|
|
|
|
|
|
/* add a part to the transaction */
|
|
STATIC RTN_STATUS SPiiPlus_build_trans(motor_cmnd command, double *parms, struct motorRecord *mr)
|
|
{
|
|
struct motor_trans *trans = (struct motor_trans *) mr->dpvt;
|
|
struct mess_node *motor_call;
|
|
struct controller *brdptr;
|
|
struct mess_info *motor_info;
|
|
struct SPiiPlusController *cntrl;
|
|
char buff[110];
|
|
int axis, card;
|
|
int intval;
|
|
double dval;
|
|
unsigned int size;
|
|
RTN_STATUS rtnval;
|
|
|
|
rtnval = OK;
|
|
buff[0] = '\0';
|
|
|
|
/* Protect against NULL pointer with WRTITE_MSG(GO/STOP_AXIS/GET_INFO, NULL). */
|
|
intval = (parms == NULL) ? 0 : NINT(parms[0]);
|
|
dval = (parms == NULL) ? 0 : *parms;
|
|
|
|
motor_call = &(trans->motor_call);
|
|
card = motor_call->card;
|
|
axis = motor_call->signal;
|
|
brdptr = (*trans->tabptr->card_array)[card];
|
|
if (brdptr == NULL)
|
|
return(rtnval = ERROR);
|
|
|
|
cntrl = (struct SPiiPlusController *) brdptr->DevicePrivate;
|
|
|
|
if (SPiiPlus_table[command] > motor_call->type)
|
|
motor_call->type = SPiiPlus_table[command];
|
|
|
|
if (trans->state != BUILD_STATE)
|
|
return(rtnval = ERROR);
|
|
|
|
if (command == PRIMITIVE && mr->init != NULL && strlen(mr->init) != 0)
|
|
{
|
|
strcat(motor_call->message, mr->init);
|
|
strcat(motor_call->message, "\r");
|
|
}
|
|
|
|
switch (command)
|
|
{
|
|
case MOVE_ABS:
|
|
case MOVE_REL:
|
|
case HOME_FOR:
|
|
case HOME_REV:
|
|
case JOG:
|
|
if (strlen(mr->prem) != 0)
|
|
{
|
|
strcat(motor_call->message, mr->prem);
|
|
strcat(motor_call->message, ";");
|
|
}
|
|
if (strlen(mr->post) != 0)
|
|
motor_call->postmsgptr = (char *) &mr->post;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
|
|
switch (command)
|
|
{
|
|
case MOVE_ABS:
|
|
if (cntrl->cmndMode == BUFFER)
|
|
sprintf(buff, "Done(%d)=0;target_pos(%d)=%d;opReq(%d)=%d;", axis, axis, intval, axis, OP_ABS_MOVE);
|
|
else
|
|
sprintf(buff, "ptp (%d), %d;", axis, intval);
|
|
|
|
break;
|
|
|
|
case MOVE_REL:
|
|
if (cntrl->cmndMode == BUFFER)
|
|
sprintf(buff, "Done(%d)=0;target_pos(%d)=%d;opReq(%d)=%d;", axis, axis, intval, axis, OP_REL_MOVE);
|
|
else
|
|
sprintf(buff, "ptp/r (%d), %d;", axis, intval);
|
|
break;
|
|
|
|
case HOME_FOR:
|
|
if (cntrl->cmndMode == BUFFER)
|
|
sprintf(buff, "Done(%d)=0;opReq(%d)=%d;", axis, axis, OP_HOME_F);
|
|
break;
|
|
|
|
case HOME_REV:
|
|
if (cntrl->cmndMode == BUFFER)
|
|
sprintf(buff, "Done(%d)=0;opReq(%d)=%d;", axis, axis, OP_HOME_R);
|
|
break;
|
|
|
|
case LOAD_POS:
|
|
/* The Feedback position follows the Reference set position */
|
|
sprintf(buff, "set APOS(%d)=%d;", axis, intval);
|
|
break;
|
|
|
|
case SET_VEL_BASE:
|
|
break; /* SPiiPlus does not use base velocity */
|
|
|
|
case SET_VELOCITY:
|
|
sprintf(buff, "VEL%d=%d;", axis, intval);
|
|
break;
|
|
|
|
case SET_ACCEL:
|
|
if (cntrl->cmndMode == BUFFER)
|
|
sprintf(buff, "ACC%d=%d;", axis, intval);
|
|
// else (DIRECT)
|
|
// Leave setting to Controller MMI - too many other dependant settings
|
|
|
|
break;
|
|
|
|
case GO:
|
|
if (cntrl->cmndMode == BUFFER)
|
|
{
|
|
// Execute the ACS program buffer that corresponds to the axis
|
|
// ACS Buffer Execution command must be alone
|
|
rtnval = motor_end_trans_com(mr, drvtabptr);
|
|
rtnval = (RTN_STATUS) motor_start_trans_com(mr, SPiiPlus_cards);
|
|
motor_call->type = SPiiPlus_table[command];
|
|
|
|
sprintf(buff, "start %d, 1", axis);
|
|
}
|
|
// else (DIRECT)
|
|
// Motion command initiates move
|
|
break;
|
|
|
|
case SET_ENC_RATIO:
|
|
// Leave this setting to the controller MMI - too much interdependence
|
|
// sprintf(buff, "EFAC%d=%f;", axis, dval);
|
|
break;
|
|
|
|
case GET_INFO:
|
|
/* These commands are not actually done by sending a message, but
|
|
rather they will indirectly cause the driver to read the status
|
|
of all motors */
|
|
break;
|
|
|
|
case STOP_AXIS:
|
|
if (cntrl->cmndMode == BUFFER)
|
|
sprintf(buff, "Done(%d)=0;stop_all(%d)=1;", axis, axis);
|
|
else
|
|
sprintf(buff, "halt (%d);", axis);
|
|
|
|
break;
|
|
|
|
case JOG:
|
|
if (cntrl->cmndMode == BUFFER)
|
|
{
|
|
sprintf(buff, "Done(%d)=0;jog_vel(%d)=%d; opReq(%d)=%d;", axis, axis, intval, axis, OP_JOG_MOVE);
|
|
|
|
strcat(motor_call->message, buff);
|
|
|
|
// ACS Buffer Execution command must be alone
|
|
rtnval = motor_end_trans_com(mr, drvtabptr);
|
|
rtnval = (RTN_STATUS) motor_start_trans_com(mr, SPiiPlus_cards);
|
|
motor_call->type = SPiiPlus_table[command];
|
|
|
|
sprintf(buff, "start %d,1", axis);
|
|
}
|
|
else
|
|
sprintf(buff, "jog/v (%d), %d;", axis, intval);
|
|
|
|
break;
|
|
|
|
case SET_PGAIN:
|
|
break;
|
|
|
|
case SET_IGAIN:
|
|
break;
|
|
|
|
case SET_DGAIN:
|
|
break;
|
|
|
|
case ENABLE_TORQUE:
|
|
sprintf(buff, "enable(%d);", axis);
|
|
break;
|
|
|
|
case DISABL_TORQUE:
|
|
sprintf(buff, "disable(%d);", axis);
|
|
break;
|
|
|
|
case SET_HIGH_LIMIT:
|
|
motor_info = &(*trans->tabptr->card_array)[card]->motor_info[axis];
|
|
trans->state = IDLE_STATE; /* No command sent to the controller. */
|
|
|
|
// if (intval > motor_info->high_limit)
|
|
// {
|
|
// mr->dhlm = motor_info->high_limit * mr->mres;
|
|
// rtnval = ERROR;
|
|
// }
|
|
break;
|
|
|
|
case SET_LOW_LIMIT:
|
|
motor_info = &(*trans->tabptr->card_array)[card]->motor_info[axis];
|
|
trans->state = IDLE_STATE; /* No command sent to the controller. */
|
|
|
|
// if (intval < motor_info->low_limit)
|
|
// {
|
|
// mr->dllm = motor_info->low_limit * mr->mres;
|
|
// rtnval = ERROR;
|
|
// }
|
|
break;
|
|
|
|
default:
|
|
rtnval = ERROR;
|
|
}
|
|
|
|
size = strlen(buff);
|
|
if (size > sizeof(buff) || (strlen(motor_call->message) + size) > MAX_MSG_SIZE)
|
|
errlogMessage("SPiiPlus_build_trans(): buffer overflow.\n");
|
|
else
|
|
strcat(motor_call->message, buff);
|
|
|
|
return(rtnval);
|
|
}
|