forked from epics_driver_modules/motorBase
Ron Sluiter
40 lines
1.2 KiB
Batchfile
40 lines
1.2 KiB
Batchfile
# This example if for OMS VME8/44 controllers. Since OMS controllers
|
|
# communicate across the VME backplace, this example does not require
|
|
# MPF.
|
|
|
|
#The following must be added for many board support packages
|
|
#cd "... IOC st.cmd complete directory path ... "
|
|
|
|
< cdCommands
|
|
|
|
#< ../nfsCommands
|
|
|
|
cd appbin
|
|
|
|
# If the VxWorks kernel was built using the project facility, the following must
|
|
# be added before any C++ code is loaded (see SPR #28980).
|
|
sysCplusEnable=1
|
|
|
|
ld < NoMPF.munch
|
|
|
|
cd startup
|
|
dbLoadDatabase("../../dbd/NoMPF.dbd")
|
|
registerRecordDeviceDriver(pdbbase)
|
|
|
|
dbLoadRecords("../../db/NoMPF.db")
|
|
#dbLoadRecords("../../motorExApp/Db/SoftMotorEx.db","user=rls,motor=m1", startup)
|
|
|
|
# OMS VME driver setup parameters:
|
|
# (1)cards, (2)axes per card, (3)base address(short, 16-byte boundary),
|
|
# (4)interrupt vector (0=disable or 64 - 255), (5)interrupt level (1 - 6),
|
|
# (6)motor task polling rate (min=1Hz,max=60Hz)
|
|
#omsSetup(1, 8, 0xFC00, 180, 5, 10)
|
|
|
|
# OMS VME58 driver setup parameters:
|
|
# (1)cards, (2)axes per card, (3)base address(short, 4k boundary),
|
|
# (4)interrupt vector (0=disable or 64 - 255), (5)interrupt level (1 - 6),
|
|
# (6)motor task polling rate (min=1Hz,max=60Hz)
|
|
oms58Setup(1, 8, 0x1000, 190, 5, 10)
|
|
|
|
iocInit
|