forked from epics_driver_modules/motorBase
MarkRivers
55 lines
1.7 KiB
Plaintext
55 lines
1.7 KiB
Plaintext
#errlogInit(5000)
|
|
< envPaths
|
|
# Tell EPICS all about the record types, device-support modules, drivers,
|
|
# etc. in this build from CARS
|
|
dbLoadDatabase("../../dbd/WithAsyn.dbd")
|
|
WithAsyn_registerRecordDeviceDriver(pdbbase)
|
|
|
|
### Motors
|
|
dbLoadTemplate "motor.substitutions.xps4"
|
|
|
|
dbLoadTemplate "XPSAux.substitutions"
|
|
|
|
# asyn port, IP address, IP port, number of axes,
|
|
# active poll period (ms), idle poll period (ms),
|
|
# enable set position, set position settling time (ms)
|
|
XPSConfig("XPS1", "164.54.160.124", 5001, 6, 10, 500, 0, 500)
|
|
asynSetTraceIOMask("XPS1", 0, 2)
|
|
#asynSetTraceMask("XPS1", 0, 255)
|
|
|
|
# asynPort, IP address, IP port, poll period (ms)
|
|
XPSAuxConfig("XPS_AUX1", "164.54.160.124", 5001, 50)
|
|
#asynSetTraceIOMask("XPS_AUX1", 0, 2)
|
|
#asynSetTraceMask("XPS_AUX1", 0, 255)
|
|
|
|
# XPS asyn port, axis, groupName.positionerName, stepSize
|
|
XPSConfigAxis("XPS1",0,"GROUP1.PHI", 1000)
|
|
XPSConfigAxis("XPS1",1,"GROUP1.KAPPA", 5000)
|
|
XPSConfigAxis("XPS1",2,"GROUP1.OMEGA", 5000)
|
|
XPSConfigAxis("XPS1",3,"GROUP1.PSI", 4000)
|
|
XPSConfigAxis("XPS1",4,"GROUP1.2THETA", 10000)
|
|
XPSConfigAxis("XPS1",5,"GROUP1.NU", 4000)
|
|
|
|
# XPS asyn port, max points, FTP username, FTP password
|
|
# Note: this must be done after configuring axes
|
|
XPSConfigProfile("XPS1", 2000, "Administrator", "Administrator")
|
|
|
|
XPSEnableSetPosition(XPS1, 0)
|
|
XPSSetPositionSettlingTime(XPS1, 200)
|
|
|
|
iocInit
|
|
|
|
# This IOC does not use save/restore, so set values of some PVs
|
|
dbpf("IOC:m1.RTRY", "0")
|
|
dbpf("IOC:m1.TWV", "0.1")
|
|
dbpf("IOC:m2.RTRY", "0")
|
|
dbpf("IOC:m2.TWV", "0.1")
|
|
dbpf("IOC:m3.RTRY", "0")
|
|
dbpf("IOC:m3.TWV", "0.1")
|
|
dbpf("IOC:m4.RTRY", "0")
|
|
dbpf("IOC:m4.TWV", "0.1")
|
|
dbpf("IOC:m5.RTRY", "0")
|
|
dbpf("IOC:m5.TWV", "0.1")
|
|
dbpf("IOC:m6.RTRY", "0")
|
|
dbpf("IOC:m6.TWV", "0.1")
|