UDF state is not shown during initialization anymore

These changes process the AdjustOrigin record during initialization to
make sure its .STAT field does not show "UDF" anymore before the first
processing. The gate record makes sure that no command is send to the
underlying hardware during initial processing.

db/detectorTower.db

@@ -58,7 +58,6 @@ record(ai, "$(INSTR)$(M):Origin") {
     field(INP, "@asyn($(CONTROLLER),$(AXIS)) MOTOR_ORIGIN")
     field(SCAN, "I/O Intr")
     field(PINI, "NO")
-    field(VAL, "0")
 }
 
 # Shift the origin of the corresponding axis by the given value. The axis will move to this 
@@ -66,19 +65,31 @@ record(ai, "$(INSTR)$(M):Origin") {
 # new "0" value. This PV does nothing for "normal" Turbo PMAC axes.
 record(ao, "$(INSTR)$(M):AdjustOrigin") {
     field(DTYP, "Raw Soft Channel")
-    field(PINI, "NO")
+    field(PINI, "YES")
     field(FLNK, "$(INSTR)$(M):ResetAO")
     field(VAL, "0")
+    field(UDF, "FALSE")
+    field(SCAN, "Passive")
+}
+
+# Only forward nonzero inputs for the origin adjustment
+record(calc, "$(INSTR)$(M):GateOrigin") {
+    field(CALC, "A!=0?A:VAL")
+    field(INPA, "$(INSTR)$(M):AdjustOrigin")
+    field(OUT, "$(INSTR)$(M):WriteAO.VAL PP") # Forward the value to the driver
+    field(PINI, "NO")
+    field(SCAN, "Passive")
 }
 
 # Reset the PV $(INSTR)$(M):AdjustOrigin to zero after it has been written to and
 # forward the value to $(INSTR)$(M):WriteAO which does the actual writing.
 record(seq, "$(INSTR)$(M):ResetAO") {
     field(DESC, "Write value to hardware then reset to 0")
-    field(DOL1, "$(INSTR)$(M):AdjustOrigin") 
+    field(DOL1, "1") # Dummy value which is only here to trigger processing of LNK1
-    field(LNK1, "$(INSTR)$(M):WriteAO.VAL PP")   # Perform write to hardware
+    field(LNK1, "$(INSTR)$(M):GateOrigin.PROC PP")
     field(DOL2, "0.0") 
     field(LNK2, "$(INSTR)$(M):AdjustOrigin.VAL PP")   # Reset to zero
+    field(UDF, "FALSE")
 }
 
 # This record forwards the adjustment of the origin to the asyn driver.