Use split() for fetching last tag with darcs

(setting $/='' breaks reading multi-line into an array)

.gitmodules

@@ -1,6 +1,7 @@
 [submodule "modules/pvData"]
     path = modules/pvData
-    url = https://github.com/epics-base/pvDataCPP
+#    url = https://github.com/epics-base/pvDataCPP
+    url = git@git.psi.ch:epics_base/pvData.git
     branch = master
 [submodule "modules/pvAccess"]
     path = modules/pvAccess
@@ -26,3 +27,6 @@
     path = .ci
     url = https://github.com/epics-base/ci-scripts
     branch = master
+[submodule "modules/pcas"]
+    path = modules/pcas
+    url = https://github.com/epics-modules/pcas

Makefile

@@ -23,3 +23,10 @@ DIRS += modules
 modules_DEPEND_DIRS = src
 
 include $(TOP)/configure/RULES_TOP
+
+UNINSTALL_DIRS += $(INSTALL_LOCATION)/src
+copysrc:
+	tar cf - --exclude-vcs --exclude-backups --exclude=O.* modules/*/src | tar xf - -C $(INSTALL_LOCATION)
+
+tar:
+	tar cfjP epics_base-$(EPICS_VERSION_NUMBER).tar.bz2 $(INSTALL_LOCATION)

configure/CONFIG.gnuCommon

@@ -33,7 +33,11 @@ CODE_CFLAGS = $(PROF_CFLAGS_$(PROFILE)) $(GPROF_CFLAGS_$(GPROF))
 CODE_CFLAGS += $(ASAN_FLAGS_$(ENABLE_ASAN))
 WARN_CFLAGS_YES = -Wall -Werror-implicit-function-declaration
 WARN_CFLAGS_NO = -w
-OPT_CFLAGS_YES = -O3
+# It makes sense to include debugging symbols even in optimized builds
+# in case you want to attach gdb to the process or examine a core-dump.
+# This does cost disk space, but not memory as debug symbols are not
+# loaded into RAM when the binary is loaded.
+OPT_CFLAGS_YES = -O3 -g
 OPT_CFLAGS_NO = -g
 
 PROF_CXXFLAGS_YES = -p
@@ -42,7 +46,7 @@ CODE_CXXFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
 CODE_CXXFLAGS += $(ASAN_FLAGS_$(ENABLE_ASAN))
 WARN_CXXFLAGS_YES = -Wall
 WARN_CXXFLAGS_NO = -w
-OPT_CXXFLAGS_YES = -O3
+OPT_CXXFLAGS_YES = -O3 -g
 OPT_CXXFLAGS_NO = -g
 
 CODE_LDFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))

configure/CONFIG_BASE_VERSION

@@ -48,15 +48,15 @@ EPICS_VERSION = 7
 EPICS_REVISION = 0
 
 # EPICS_MODIFICATION must be a number >=0 and <256
-EPICS_MODIFICATION = 8
+EPICS_MODIFICATION = 7
 
 # EPICS_PATCH_LEVEL must be a number (win32 resource file requirement)
 # Not included in the official EPICS version number if zero
-EPICS_PATCH_LEVEL = 0
+EPICS_PATCH_LEVEL = 1
 
 # Immediately after an official release the EPICS_PATCH_LEVEL is incremented
 # and the -DEV suffix is added (similar to the Maven -SNAPSHOT versions)
-EPICS_DEV_SNAPSHOT=
+EPICS_DEV_SNAPSHOT=-DEV
 
 # No changes should be needed below here
 

configure/CONFIG_CA_VERSION

@@ -6,7 +6,7 @@ EPICS_CA_MAINTENANCE_VERSION = 3
 
 # Development flag, set to zero for release versions
 
-EPICS_CA_DEVELOPMENT_FLAG = 0
+EPICS_CA_DEVELOPMENT_FLAG = 1
 
 # Immediately after a release the MAINTENANCE_VERSION
 # will be incremented and the DEVELOPMENT_FLAG set to 1

configure/CONFIG_DATABASE_VERSION

@@ -1,12 +1,12 @@
 # Version number for the database APIs and shared library
 
 EPICS_DATABASE_MAJOR_VERSION = 3
-EPICS_DATABASE_MINOR_VERSION = 23
-EPICS_DATABASE_MAINTENANCE_VERSION = 0
+EPICS_DATABASE_MINOR_VERSION = 22
+EPICS_DATABASE_MAINTENANCE_VERSION = 1
 
 # Development flag, set to zero for release versions
 
-EPICS_DATABASE_DEVELOPMENT_FLAG = 0
+EPICS_DATABASE_DEVELOPMENT_FLAG = 1
 
 # Immediately after a release the MAINTENANCE_VERSION
 # will be incremented and the DEVELOPMENT_FLAG set to 1

configure/CONFIG_LIBCOM_VERSION

@@ -1,12 +1,12 @@
 # Version number for the libcom APIs and shared library
 
 EPICS_LIBCOM_MAJOR_VERSION = 3
-EPICS_LIBCOM_MINOR_VERSION = 23
-EPICS_LIBCOM_MAINTENANCE_VERSION = 0
+EPICS_LIBCOM_MINOR_VERSION = 22
+EPICS_LIBCOM_MAINTENANCE_VERSION = 1
 
 # Development flag, set to zero for release versions
 
-EPICS_LIBCOM_DEVELOPMENT_FLAG = 0
+EPICS_LIBCOM_DEVELOPMENT_FLAG = 1
 
 # Immediately after a release the MAINTENANCE_VERSION
 # will be incremented and the DEVELOPMENT_FLAG set to 1

configure/CONFIG_SITE

@@ -157,7 +157,9 @@ USE_POSIX_THREAD_PRIORITY_SCHEDULING = YES
 
 # Site version number, if set will append '-' and this string to the
 #  EPICS version number string that is reported by many tools.
-EPICS_SITE_VERSION =
+ifeq ($(INSTALL_LOCATION),$(EPICS_BASE))
+EPICS_SITE_VERSION=$(shell $(PERL) -MPOSIX -e 'print strftime "%Y-%m-%d", localtime')
+endif
 
 # For GNU compiler, use pipes rather than temporary files for
 #  communication between the various stages of compilation.

configure/RULES_BUILD

@@ -100,6 +100,23 @@ include $(CONFIG)/RULES_FILE_TYPE
 
 include $(CONFIG)/RULES.Db
 
+#---------------------------------------------------------------
+# Do not build anything if current path matches SKIP_BUILDS
+
+ifneq (,$(strip $(SKIP_BUILDS)))
+CURRENT_MODULE=$(subst modules/,,$(subst $(realpath $(TOP)/..)/,,$(subst $(realpath $(dir $(lastword $(MAKEFILE_LIST)))..)/,,$(realpath ..))))
+ifneq ($(filter $(SKIP_BUILDS) $(addsuffix /%,$(SKIP_BUILDS)),$(CURRENT_MODULE)),)
+$(info Skipping $(CURRENT_MODULE) for $(T_A))
+PROD=
+TESTPROD=
+LIBRARY=
+TESTLIBRARY=
+LOADABLE_LIBRARY=
+TESTS=
+SRC_FILES=
+endif
+endif
+
 #---------------------------------------------------------------
 # Include defines and rules for prod, library and test* targets
 
@@ -226,7 +243,7 @@ $(LOADABLE_SHRLIBNAME): FINAL_DIR=$(INSTALL_SHRLIB)
 
 $(TESTPRODNAME) $(PRODNAME): $(PRODUCT_OBJS) $(PROD_RESS) $(PROD_DEPLIBS)
 
-$(TESTPRODNAME) $(PRODNAME): %$(EXE): | $(INSTALL_LIB)
+$(TESTPRODNAME) $(PRODNAME): %$(EXE):
 	@$(RM) $@
 	$(LINK.cpp)
 	$(MT_EXE_COMMAND)
@@ -329,10 +346,6 @@ $(LOADABLE_SHRLIBNAME): $(LOADABLE_SHRLIB_PREFIX)%$(LOADABLE_SHRLIB_SUFFIX):
 	$(LINK.shrlib)
 	$(MT_DLL_COMMAND)
 
-$(LIBNAME) $(SHRLIBNAME) $(LOADABLE_SHRLIBNAME): | $(INSTALL_LIB)
-$(INSTALL_LIB):
-	@$(MKDIR) $@
-
 #---------------------------------------------------------------
 # C++ munching for VxWorks
 

configure/os/CONFIG.Common.RHEL7-x86_64

@@ -0,0 +1,6 @@
+# Include definitions common to linux pentium targets
+include $(CONFIG)/os/CONFIG.Common.linux-x86_64
+
+TOOLSET_LOCATION = /opt/rh
+TOOLSET = devtoolset-12
+STD_CXXFLAGS = -std=c++20

configure/os/CONFIG.Common.RHEL7-x86_64-clang

@@ -0,0 +1 @@
+include $(CONFIG)/os/CONFIG.Common.linux-clang

configure/os/CONFIG.Common.RHEL8-x86_64

@@ -0,0 +1,18 @@
+# Include definitions common to linux pentium targets
+include $(CONFIG)/os/CONFIG.Common.linux-x86_64
+
+TOOLSET_LOCATION = /opt/rh
+TOOLSET = gcc-toolset-12
+STD_CXXFLAGS = -std=c++20
+
+# Fix bug in gcc-toolset-11 calling the old assembler
+ifneq ($(filter %-11,$(TOOLSET)),)
+TARGET_CPPFLAGS += $(TOOLSET_DIR:%=-B$(SYSROOT)%/bin)
+TARGET_LDFLAGS  += $(TOOLSET_DIR:%=-B$(SYSROOT)%/bin)
+endif
+
+ifneq (($(TOOLSET)),)
+# Perl requests (native) annobin incompatible with the annobin from any TOOLSET
+# Disable Perl specific CFLAGS
+override Cap5_CFLAGS=
+endif

configure/os/CONFIG.Common.RHEL8-x86_64-clang

@@ -0,0 +1,3 @@
+include $(CONFIG)/os/CONFIG.Common.linux-clang
+
+STD_CXXFLAGS = -std=c++2a

configure/os/CONFIG.Common.RTEMS-pc686

@@ -32,7 +32,7 @@ OP_SYS_LDFLAGS += -Wl,-Ttext,0x100000
 
 
 # This check must appear after the above include
-ifneq ($(RTEMS_VERSION),5)
+ifneq ($(firstword $(subst ., ,$(RTEMS_VERSION))),5)
   $(info *** This target is not compatible with the configured RTEMS version.)
   $(info *** Build the RTEMS-pc386 (-qemu) target for RTEMS 4.x)
   $(error Can't continue)

configure/os/CONFIG.Common.RTEMS49-pc386

@@ -0,0 +1,2 @@
+RTEMS_VERSION = 4.9
+include $(CONFIG)/os/CONFIG.Common.RTEMS-pc386

configure/os/CONFIG.Common.RTEMS51-pc686

@@ -0,0 +1,2 @@
+RTEMS_VERSION = 5
+include $(CONFIG)/os/CONFIG.Common.RTEMS-pc686

configure/os/CONFIG.Common.T2-ppc604

@@ -0,0 +1,8 @@
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
+VXWORKS_VERSION = 5.5.1
+WIND_BASE = /afs/psi.ch/project/vxworks/Tornado2.2.1
+
+#there is a problem with our ccppc and optimization
+# -O0 works, -O and -O1 and higher are buggy
+OPT_CFLAGS_YES = -O0
+OPT_CXXFLAGS_YES = -O0

configure/os/CONFIG.Common.V62-ppc604

@@ -0,0 +1,2 @@
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
+VXWORKS_VERSION = 6.2

configure/os/CONFIG.Common.V63-ppc603

@@ -0,0 +1,5 @@
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc603_long
+VXWORKS_VERSION = 6.3
+
+# Buggy "uninitialized variable" warning produces many false positives
+ARCH_DEP_CXXFLAGS += -Wno-uninitialized

configure/os/CONFIG.Common.V63-ppc604

@@ -0,0 +1,5 @@
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
+VXWORKS_VERSION = 6.3
+
+# Buggy "uninitialized variable" warning produces many false positives
+ARCH_DEP_CXXFLAGS += -Wno-uninitialized

configure/os/CONFIG.Common.V64-ppc604

@@ -0,0 +1,5 @@
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
+VXWORKS_VERSION = 6.4
+
+# Buggy "uninitialized variable" warning produces many false positives
+ARCH_DEP_CXXFLAGS += -Wno-uninitialized

configure/os/CONFIG.Common.V66-ppc603

@@ -0,0 +1,2 @@
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc603_long
+VXWORKS_VERSION = 6.6

configure/os/CONFIG.Common.V66-ppc604

@@ -0,0 +1,2 @@
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
+VXWORKS_VERSION = 6.6

configure/os/CONFIG.Common.V67-ppc604

@@ -0,0 +1,8 @@
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
+VXWORKS_VERSION = 6.7
+
+# needed when including memPartLib.h, e.g. through moduleLib.h or loadLib.h
+ARCH_DEP_CFLAGS += -D_VSB_CONFIG_FILE='<../lib/h/config/vsbConfig.h>'
+
+# compiler tries to access license server (even though no license isneeded)
+export LM_LICENSE_FILE=37000@lic-windriver.psi.ch

configure/os/CONFIG.Common.V69-ppc32

@@ -0,0 +1,3 @@
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc32
+VXWORKS_VERSION = 6.9
+#export LD_LIBRARY_PATH=$(WIND_BASE)/lmapi-5.0/$(WIND_HOST_TYPE)/lib

configure/os/CONFIG.Common.V69-ppc604

@@ -0,0 +1,6 @@
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
+VXWORKS_VERSION = 6.9
+#export LD_LIBRARY_PATH=$(WIND_BASE)/lmapi-5.0/$(WIND_HOST_TYPE)/lib
+
+# -fno-implicit-fp causes error: "unable to find a register to spill in class 'FLOAT_REGS'"
+ARCH_DEP_CFLAGS = -mcpu=604 -mstrict-align

configure/os/CONFIG.Common.deb10-x86_64

@@ -0,0 +1,22 @@
+# Cross Debian 10 with gcc 8.3
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = x86_64
+
+LDLIBS_SHARED_YES=LDLIBS
+
+SDK = gcc
+SDK_DIR  = /opt/xgcc/gcc-8.3.0-deb10
+GNU_ARCH = x86_64-deb10-linux-gnu
+SDKTARGETSYSROOT=$(SDK_DIR)/$(GNU_ARCH)/sys-root/
+GNU_DIR = $(SDK_DIR)
+GNU_BIN = $(GNU_DIR)/bin/
+GNU_TARGET_INCLUDE_DIR =
+GNU_TARGET=x86_64-deb10-linux-gnu
+
+ARCH_DEP_CPPFLAGS =
+AS=$(GNU_BIN)/$(GNU_TARGET)-as
+
+STD_CXXFLAGS = -std=c++17

configure/os/CONFIG.Common.eldk42-ppc4xxFP

@@ -0,0 +1,28 @@
+# DeltaTau PowerPMAC with ELDK 4.2
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+ARCH_CLASS = ppc
+
+ELDK=/opt/eldk-4.2
+GNU_TARGET=ppc_4xxFP
+GNU_DIR=$(ELDK)/usr
+
+# This cross tool chain is installed in a somehow weired way
+# Without the following lines it does not work on RHEL7
+# but it worked on SL6
+ARCH_DEP_CXXFLAGS += -I $(ELDK)/$(GNU_TARGET)/usr/include/c++/4.2.2
+ARCH_DEP_CXXFLAGS += -I $(ELDK)/$(GNU_TARGET)/usr/include/c++/4.2.2/powerpc-linux
+ARCH_DEP_CXXFLAGS += -I $(ELDK)/$(GNU_TARGET)/usr/include/c++/4.2.2/backward
+
+ARCH_DEP_LDFLAGS += -Wl,-rpath-link,$(ELDK)/$(GNU_TARGET)/lib
+ARCH_DEP_LDFLAGS += -Wl,-rpath-link,$(ELDK)/$(GNU_TARGET)/usr/lib
+
+# have no C++11
+STD_CXXFLAGS =
+
+# suppress strict alias warnings
+CODE_CPPFLAGS += -fno-strict-aliasing

configure/os/CONFIG.Common.eldk51-ppc4xxSF

@@ -0,0 +1,17 @@
+# Virtex FPGA embedded Processor with ELDK 5.1
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = ppc
+
+SDK = eldk
+SDK_DIR = /opt/eldk-5.1
+SDK_HOST_ARCH = $(GNU_HOST_ARCH)-$(SDK)-$(GNU_HOST_OS)
+GNU_TARGET = powerpc-4xx-softfloat
+GNU_ARCH = ppc405-linux
+GNU_DIR = $(SDK_DIR)/$(GNU_TARGET)/sysroots/$(SDK_HOST_ARCH)/usr
+GNU_BIN = $(GNU_DIR)/bin/$(GNU_ARCH)
+
+# have no full C++11
+STD_CXXFLAGS = -std=c++0x

configure/os/CONFIG.Common.eldk52-e500v2

@@ -0,0 +1,18 @@
+# IOxOS IFC1210 with ELDK 5.2
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = ppc
+
+SDK = eldk
+SDK_DIR = /opt/eldk-5.2
+SDK_HOST_ARCH = $(GNU_HOST_ARCH)-$(SDK)-$(GNU_HOST_OS)
+GNU_TARGET = powerpc-e500v2
+GNU_ARCH = ppce500v2-linux-gnuspe
+GNU_DIR = $(SDK_DIR)/$(GNU_TARGET)/sysroots/$(SDK_HOST_ARCH)/usr
+GNU_BIN = $(GNU_DIR)/bin/$(GNU_ARCH)
+GNU_TARGET_INCLUDE_DIR =
+
+# have no full C++11
+STD_CXXFLAGS = -std=c++0x

configure/os/CONFIG.Common.eldk53-ppc4xxFP

@@ -0,0 +1,20 @@
+# DeltaTau PowerPMAC with ELDK 5.3
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = ppc
+
+SDK = eldk
+SDK_DIR = /opt/eldk-5.3
+SDK_HOST_ARCH = $(GNU_HOST_ARCH)-$(SDK)-$(GNU_HOST_OS)
+GNU_ARCH = ppc440e-linux
+SDKTARGETSYSROOT=$(SDK_DIR)/powerpc-4xx/sysroots
+GNU_DIR = $(SDKTARGETSYSROOT)/$(SDK_HOST_ARCH)/usr
+GNU_BIN = $(GNU_DIR)/bin/$(GNU_ARCH)
+GNU_TARGET_INCLUDE_DIR =
+GNU_TARGET=powerpc-linux
+SYSROOT = $(SDKTARGETSYSROOT)/$(GNU_ARCH)
+
+ARCH_DEP_CPPFLAGS =  -m32 -mcpu=440fp -mhard-float
+AS=$(GNU_BIN)/$(GNU_TARGET)-as

configure/os/CONFIG.Common.fslqoriq20-e6500_64

@@ -0,0 +1,17 @@
+# IOxOS IFC1211 with Freescale QorIQ 2.0 toolchain
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = ppc
+
+SDK = fslsdk
+SDK_DIR = /opt/fsl-qoriq/2.0
+SDK_HOST_ARCH = $(GNU_HOST_ARCH_64)-$(SDK)-$(GNU_HOST_OS)
+SDK_TARGET = ppc64e6500-fsl-linux
+GNU_TARGET = powerpc64-fsl-linux
+SYSROOT = $(SDK_DIR)/sysroots/$(SDK_TARGET)
+GNU_DIR = $(SDK_DIR)/sysroots/$(SDK_HOST_ARCH)/usr
+GNU_BIN = $(GNU_DIR)/bin/$(GNU_TARGET)
+
+ARCH_DEP_CFLAGS = -mcpu=e6500 -m64 -mhard-float

configure/os/CONFIG.Common.gcc8-ppc4xxFP

@@ -0,0 +1,21 @@
+# DeltaTau PowerPMAC with gcc 8.5
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = ppc
+
+SDK = gcc
+SDK_DIR = /opt/xgcc/gcc-8.5.0
+GNU_ARCH = powerpc-ppmac-linux-gnu
+SDKTARGETSYSROOT=$(SDK_DIR)/$(GNU_ARCH)/sys-root/
+GNU_DIR = $(SDK_DIR)
+GNU_BIN = $(GNU_DIR)/bin/
+GNU_TARGET_INCLUDE_DIR =
+GNU_TARGET=powerpc-ppmac-linux-gnu
+
+ARCH_DEP_CPPFLAGS =  -m32 -mcpu=440fp -mhard-float
+ARCH_DEP_LDFLAGS+=-Wl,-rpath,/opt/xgcc/gcc-8.5.0/$(GNU_ARCH)/lib
+ARCH_DEP_LDFLAGS+=-Wl,-rpath-link,$(SDKTARGETSYSROOT)/lib/powerpc-linux-gnu/
+ARCH_DEP_LDFLAGS+=-Wl,-rpath-link,$(SDKTARGETSYSROOT)/usr/lib/powerpc-linux-gnu/
+AS=$(GNU_BIN)/$(GNU_TARGET)-as

configure/os/CONFIG.Common.linux-clang

@@ -0,0 +1,5 @@
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+GNU         = NO
+CMPLR_CLASS = clang
+CC          = clang
+CCC         = clang++

configure/os/CONFIG.Common.moxa42-armv6l

@@ -0,0 +1,26 @@
+# Moxa DA-66x with SDK 4.2 and ARM7 processor
+
+# Include definitions common to all Linux ARM targets
+include $(CONFIG)/os/CONFIG.Common.linux-arm
+
+GNU_DIR=/afs/psi.ch/project/embeddedlinux/moxa/arm-linux-4.4.2-v4
+GNU_TARGET=arm
+ARCH_DEP_LDFLAGS+=-Wl,-rpath-link,$(GNU_DIR)/arm-none-linux-gnueabi/lib
+ARCH_DEP_LDFLAGS+=-Wl,-rpath-link,$(INSTALL_LIB)
+
+COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# suppress note "the mangling of 'va_list' has changed in GCC 4.4"
+ARCH_DEP_CXXFLAGS += -Wno-psabi
+
+ARCH_DEP_CFLAGS += -funwind-tables
+
+# have no full C++11
+STD_CXXFLAGS = -std=c++0x
+
+# suppress strict alias warnings
+CODE_CPPFLAGS += -fno-strict-aliasing
+
+# accept4() exists but does not work
+# Give fake __rtems__ macro to posix/osdSock.c because that disables accept4()
+osdSock_CFLAGS += -D__rtems__

configure/os/CONFIG.Common.mvl40-xscale_be

@@ -0,0 +1,18 @@
+# Moxa DA-66x with Montavista Linux 4.0
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+COMMANDLINE_LIBRARY = READLINE_CURSES
+
+ARCH_CLASS = xscale
+
+GNU_DIR=/afs/psi.ch/project/embeddedlinux/moxa/xscale_be/armv5teb-montavista-linuxeabi
+
+ARCH_DEP_CFLAGS += -funwind-tables
+
+# have no C++11
+STD_CXXFLAGS =
+
+# Cannot build PVA because of missing boost support
+SKIP_BUILDS = pv% normativeTypes

configure/os/CONFIG.Common.nilrt7-armv7a

@@ -0,0 +1,17 @@
+# National Instruments CompactRIO running LabView RT 19.5.1
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = arm
+
+GNU_TARGET = arm-linux-gnu
+
+SYSROOT = /opt/LabVIEW-RT-19.5.1/arm/sysroots/armv7a-vfp-neon-nilrt-linux-gnueabi
+GNU_BIN = /bin
+
+ARCH_DEP_CPPFLAGS += -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon
+ARCH_DEP_CXXFLAGS += -I$(SYSROOT)/usr/include/c++/4.7.2/arm-nilrt-linux-gnueabi/
+ARCH_DEP_CXXFLAGS += -I$(SYSROOT)/usr/include/c++/4.7.2/
+
+COMMANDLINE_LIBRARY = READLINE_NCURSES

configure/os/CONFIG.Common.raspbian-arm

@@ -0,0 +1,41 @@
+# RaspberryPi with github.com/raspberrypi/tools toolchain
+# Tested on:
+# * Raspberry 3B+ Raspbian 9
+# * Raspberry 2   Raspbian 7
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+# Using readline:
+# Due to missing/messed up libs in the toolchain, readline needs copies of
+# libtinfo.so.5.9 and libreadline.so.6.2 from a Raspbian 7 rootfs
+# /lib/arm-linux-gnueabihf/ to the toolchain, e.g.
+# $(SDK_DIR)/gcc-linaro-arm-linux-gnueabihf-raspbian/arm-linux-gnueabihf/libc/lib/arm-linux-gnueabihf/
+# and manually created links libtinfo.so.5 and libreadline.so.
+# For gcc-linaro-arm-linux-gnueabihf-raspbian, an existing incompatible
+# libtinfo.so.5 is in the way. Remove it.
+# (Built with glibc 2.16 like installed on Raspbian 9 but toolchain uses glibc 2.13.)
+# Also copy /usr/include/readline/ directory from some readline 6 installation
+# to $(SDK_DIR)/gcc-linaro-arm-linux-gnueabihf-raspbian/arm-linux-gnueabihf/libc/usr/include/
+
+ARCH_CLASS = arm
+
+SDK_DIR = /opt/raspberrypi/arm-bcm2708
+
+# Available SDK_TARGETs:
+
+# gcc 4.8.3 for 32 bit hosts with GLIBC 2.3 or higher
+SDK_TARGET = gcc-linaro-arm-linux-gnueabihf-raspbian
+
+# gcc 4.8.3 for 64 bit hosts with GLIBC 2.14 or higher
+# SDK_TARGET = gcc-linaro-arm-linux-gnueabihf-raspbian-x64
+
+# gcc 4.7.1 for 64 bit hosts with GLIBC 2.8 or higher
+# SDK_TARGET = arm-linux-gnueabihf
+
+# gcc 4.7.1 for 32 bit hosts with GLIBC 2.4 or higher
+# SDK_TARGET = arm-bcm2708hardfp-linux-gnueabi
+# SDK_TARGET = arm-bcm2708-linux-gnueabi
+
+GNU_DIR = $(SDK_DIR)/$(SDK_TARGET)
+GNU_TARGET = $(if $(filter arm-bcm2708%,SDK_TARGET),$(SDK_TARGET),arm-linux-gnueabihf)

configure/os/CONFIG.Common.yocto21-aarch64

@@ -0,0 +1,15 @@
+# XILINX Zynq with Yocto 2.1 / Petalinux toolchain
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = arm64
+
+SDK = petalinux
+SDK_DIR = /opt/petalinux-gfa/2018.1
+SDK_HOST_ARCH = $(GNU_HOST_ARCH_64)-$(SDK)-$(GNU_HOST_OS)
+SDK_TARGET = aarch64-xilinx-linux
+GNU_TARGET = $(SDK_TARGET)
+SYSROOT = $(SDK_DIR)/sysroots/$(SDK_TARGET)
+GNU_DIR = $(SDK_DIR)/sysroots/$(SDK_HOST_ARCH)/usr
+GNU_BIN = $(GNU_DIR)/bin/$(GNU_TARGET)

configure/os/CONFIG.Common.yocto40-aarch64

@@ -0,0 +1,19 @@
+# XILINX Zynq with Yocto 4.0 toolchain
+
+# Include definitions common to all Linux targets
+include $(CONFIG)/os/CONFIG.Common.linuxCommon
+
+ARCH_CLASS = arm64
+
+SDK = pokysdk
+SDK_DIR = /opt/yocto40-aarch64
+SDK_HOST_ARCH = $(GNU_HOST_ARCH_64)-$(SDK)-$(GNU_HOST_OS)
+SDK_TARGET = cortexa53-poky-linux
+GNU_TARGET = aarch64-poky-linux
+SYSROOT = $(SDK_DIR)/sysroots/$(SDK_TARGET)
+GNU_DIR = $(SDK_DIR)/sysroots/$(SDK_HOST_ARCH)/usr
+GNU_BIN = $(GNU_DIR)/bin/$(GNU_TARGET)
+
+ARCH_DEP_CPPFLAGS = -mcpu=cortex-a53 -march=armv8-a+crc
+
+STD_CXXFLAGS = -std=c++23

configure/os/CONFIG.Linux.windows-x64

@@ -0,0 +1,6 @@
+include $(CONFIG)/os/CONFIG.windows-x64.windows-x64
+
+VALID_BUILDS = Ioc Command
+
+PATH := /opt/wine-msvc-2017/bin/x64:$(PATH)
+export WINEPREFIX = $(HOME)/.wine-$(EPICS_HOST_ARCH)

configure/os/CONFIG.RHEL7-x86_64.Common

@@ -0,0 +1,3 @@
+#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
+#Include definitions common to linux hosts
+include $(CONFIG)/os/CONFIG.linux-x86_64.Common

configure/os/CONFIG.RHEL7-x86_64.RHEL7-x86_64

@@ -0,0 +1,2 @@
+# Include common linux definitions
+include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.RHEL7-x86_64.windows-x64

@@ -0,0 +1 @@
+include $(CONFIG)/os/CONFIG.Linux.windows-x64

configure/os/CONFIG.RHEL8-x86_64.Common

@@ -0,0 +1,3 @@
+#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
+#Include definitions common to linux hosts
+include $(CONFIG)/os/CONFIG.linux-x86_64.Common

configure/os/CONFIG.RHEL8-x86_64.RHEL7-x86_64

@@ -0,0 +1,22 @@
+# Include common linux definitions
+include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
+
+# "Cross compile" for RHEL7-x86_64
+# Expects RHEL7 RPMs c++ and readline-devel installed
+# in $(SYSROOT)
+# This can be installed on RHEL7 with:
+#    yum install --installroot=$(SYSROOT) <packages>
+# (Assuming $(SYSROOT) is on a shared network volume.)
+# Optionally use a newer TOOLSET (installed on $(SYSROOT)).
+
+SYSROOT = /opt/RHEL7
+
+# "Cross" TOOLSET progs need to find their libraries
+LD_LIBRARY_PATH = $(TOOLSET_DIR:%=$(SYSROOT)%/usr/$$LIB)
+
+# These programs have library problems when using them
+# from SYSROOT but without TOOLSET.
+# But provinding LD_LIBRARY PATH crashes other progams.
+# Our host versions work just fine.
+AR = ar -rc
+RANLIB = ranlib

configure/os/CONFIG.RHEL8-x86_64.RHEL8-x86_64

@@ -0,0 +1,2 @@
+# Include common linux definitions
+include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.RHEL8-x86_64.nilrt7-armv7a

@@ -0,0 +1 @@
+GNU_BIN = /opt/RHEL7/bin

configure/os/CONFIG.RHEL8-x86_64.windows-x64

@@ -0,0 +1 @@
+include $(CONFIG)/os/CONFIG.Linux.windows-x64

configure/os/CONFIG_SITE.Common.RTEMS

@@ -24,6 +24,9 @@
 #RTEMS_VERSION = 5
 #RTEMS_BASE = /usr/local/vw/rtems/rtems-5.1
 
+# PSI:
+RTEMS_BASE = /opt/rtems/$(RTEMS_VERSION)
+
 # Cross-compile toolchain in $(RTEMS_TOOLS)/bin
 #
 RTEMS_TOOLS = $(RTEMS_BASE)

configure/os/CONFIG_SITE.Common.UnixCommon

@@ -0,0 +1,2 @@
+SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
+LOADABLE_SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)

configure/os/CONFIG_SITE.Common.deb10-x86_64

@@ -0,0 +1,2 @@
+# Debian 10
+COMMANDLINE_LIBRARY=READLINE_NCURSES

configure/os/CONFIG_SITE.Common.gcc8-ppc4xxFP

@@ -0,0 +1,2 @@
+# DeltaTau PowerPMAC with gcc
+COMMANDLINE_LIBRARY=READLINE

configure/os/CONFIG_SITE.Common.linuxCommon

@@ -8,3 +8,16 @@
 # They must be set in the host+target specific file instead:
 #   CONFIG_SITE.<linux-arch>.<linux-arch>
 
+COMMANDLINE_LIBRARY = READLINE
+
+USR_CXXFLAGS += $(STD_CXXFLAGS)
+STD_CXXFLAGS = -std=c++11
+
+TOOLSET_DIR      = $(TOOLSET:%=$(TOOLSET_LOCATION)/%/root)
+GNU_DIR = $(SYSROOT)$(TOOLSET_DIR)
+TARGET_CPPFLAGS += $(SYSROOT:%=--sysroot=%)
+TARGET_LDFLAGS  += $(SYSROOT:%=--sysroot=%)
+
+ifeq ($(filter SL% RHEL%,$(T_A)),)
+VALID_BUILDS = Ioc Command
+endif

configure/os/CONFIG_SITE.Common.vxWorksCommon

@@ -18,8 +18,82 @@ VXWORKS_VERSION = 6.9
 # architecture by adding it to an appropriate
 # CONFIG_SITE.$(EPICS_HOST_ARCH).vxWorksCommon file.
 
+#### Fixes for CONFIG.Common.vxWorksCommon  #######
+
+VX_GNU_VERSION_7 = 4.8.1.11
+
+
+# These are needed for vxWorks 6.x; the GNU toolset version number
+# is in the path to the compiler tools:
+VX_GNU_VERSION_5   = 2.96
+VX_GNU_VERSION_6 = $(VX_GNU_VERSION_$(VXWORKS_VERSION))
+VX_GNU_VERSION = $(VX_GNU_VERSION_$(VXWORKS_MAJOR_VERSION))
+VX_GNU_MAJOR_VERSION = $(firstword $(subst ., ,$(VX_GNU_VERSION)))
+VX_GNU_MINOR_VERSION = $(word 2,$(subst ., ,$(VX_GNU_VERSION)))
+
+# gcc version before 3.4 are "old" and need special treatment
+VX_OLD_GCC_2   = OLD
+VX_OLD_GCC_3.3 = OLD
+VX_OLD_GCC_3   = $(VX_OLD_GCC_3.$(VX_GNU_MINOR_VERSION))
+VX_OLD_GCC = $(VX_OLD_GCC_$(VX_GNU_MAJOR_VERSION))
+
+# vxWorks directory definitions
+VX_DIR_5 = $(WIND_BASE)
+VX_DIR_6 = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)
+VX_DIR_7 = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)/pkgs/os
+VX_DIR = $(VX_DIR_$(VXWORKS_MAJOR_VERSION))
+
+VX_INCLUDE_DIRS_5  = $(VX_DIR)/target/h
+VX_INCLUDE_DIRS_6  = $(VX_DIR)/target/h
+VX_INCLUDE_DIRS_6 += $(VX_DIR)/target/h/wrn/coreip
+VX_INCLUDE_DIRS_7  = $(VX_DIR)/core/kernel-1.2.8.0/h
+VX_INCLUDE_DIRS_7 += $(VX_DIR)/lang-lib/libc-1.0.0.1/libc-kernel-1.0.8.0/h
+VX_INCLUDE_DIRS_7 += $(VX_DIR)/utils/ostools-1.0.5.0/h
+VX_INCLUDE_DIRS_7 += $(VX_DIR)/utils/ostools-1.0.5.0/shareh
+VX_INCLUDE_DIRS_7 += $(VX_DIR)/arch/ppc-1.3.4.0/kernel/base/h/
+VX_INCLUDE_DIRS_7 += $(VX_DIR)/arch/ppc-1.3.4.0/kernel/60x/h/arch/ppc/
+VX_INCLUDE_DIRS_7 += $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)/samples/prebuilt_projects/vsb_vxsim_linux/krnl/h/public
+GNU_TARGET_INCLUDE_DIR = $(VX_INCLUDE_DIRS_$(VXWORKS_MAJOR_VERSION))
+
+TARGET_CPPFLAGS_5 = -isystem $(VX_DIR)/target/h
+TARGET_CPPFLAGS_6 = -isystem $(VX_DIR)/target/h
+TARGET_CPPFLAGS_7 = -isystem $(VX_DIR)/core/kernel-1.2.8.0/h -D_VSB_CONFIG_FILE='<$(WIND_BASE)/vxworks-$(VXWORKS_VERSION)/samples/prebuilt_projects/vsb_vxsim_linux/h/config/vsbConfig.h>'
+TARGET_CPPFLAGS = $(TARGET_CPPFLAGS_$(VXWORKS_MAJOR_VERSION))
+
+# vxWorks GNU directories
+
+GNU_DIR_5 = $(WIND_BASE)/host/$(WIND_HOST_TYPE)
+GNU_DIR_6 = $(WIND_BASE)/gnu/$(VX_GNU_VERSION)-vxworks-$(VXWORKS_VERSION)/$(WIND_HOST_TYPE)
+GNU_DIR_7 = $(WIND_BASE)/compilers/gnu-$(VX_GNU_VERSION)/$(WIND_HOST_TYPE)
+GNU_DIR = $(GNU_DIR_$(VXWORKS_MAJOR_VERSION))
+
+# Operating system flags
+
+OP_SYS_INCLUDE_CPPFLAGS_5 += -include $(VX_DIR)/target/h/vxWorks.h
+OP_SYS_INCLUDE_CPPFLAGS_5 += -I$(EPICS_BASE)/include/os/vxWorks/vxWorks5
+OP_SYS_INCLUDE_CPPFLAGS_6 += -include $(VX_DIR)/target/h/vxWorks.h
+OP_SYS_INCLUDE_CPPFLAGS_7 += -include vxWorks.h
+OP_SYS_INCLUDE_CPPFLAGS = $(OP_SYS_INCLUDE_CPPFLAGS_$(VXWORKS_MAJOR_VERSION))
+
+OP_SYS_LDFLAGS += $(OP_SYS_LDFLAGS_$@)
+OP_SYS_LDFLAGS_softIoc = -whole-archive
+OP_SYS_LDFLAGS_softIocPVA = -whole-archive
+
+# code flags (delete -fno-implicit-templates)
+CODE_CXXFLAGS =
+
 # WIND_BASE is where you installed the Wind River software.
 
 #WIND_BASE = /usr/local/vw/tornado22-$(ARCH_CLASS)
-WIND_BASE = /usr/local/vw/vxWorks-$(VXWORKS_VERSION)
+#WIND_BASE = /usr/local/vw/vxWorks-$(VXWORKS_VERSION)
 #WIND_BASE = /ade/vxWorks/$(VXWORKS_VERSION)
+WIND_BASE = /afs/psi.ch/project/vxworks/VxWorks$(VXWORKS_VERSION)
+
+#--------------------------------------------------
+# Modules we cannot build with old compiler
+
+PV_MODULES = pv% normativeTypes
+SKIP_BUILDS_5 = $(PV_MODULES)
+SKIP_BUILDS_OLD = $(PV_MODULES)
+SKIP_BUILDS_6 = $(SKIP_BUILDS_$(VX_OLD_GCC))
+SKIP_BUILDS = $(SKIP_BUILDS_$(VXWORKS_MAJOR_VERSION))

configure/os/CONFIG_SITE.RHEL7-x86_64.Common

@@ -0,0 +1,10 @@
+include $(CONFIG)/os/CONFIG_SITE.linux-x86_64.Common
+
+# Improved error checking with clang
+CROSS_COMPILER_TARGET_ARCHS += RHEL7-x86_64-clang
+CROSS_COMPILER_RUNTEST_ARCHS += RHEL7-x86_64-clang
+
+# NI Linux Real-Time 7.x
+# requires RPM gcc-c++-arm-linux-gnu
+# Not available on RHEL8
+CROSS_COMPILER_TARGET_ARCHS += nilrt7-armv7a

configure/os/CONFIG_SITE.RHEL8-x86_64.Common

@@ -0,0 +1,11 @@
+include $(CONFIG)/os/CONFIG_SITE.linux-x86_64.Common
+
+# Improved error checking with clang
+CROSS_COMPILER_TARGET_ARCHS += RHEL8-x86_64-clang
+
+# Build for old RHEL7 64 bit
+CROSS_COMPILER_TARGET_ARCHS += RHEL7-x86_64
+
+# NI Linux Real-Time 7.x
+# requires RPM gcc-c++-arm-linux-gnu
+CROSS_COMPILER_TARGET_ARCHS += nilrt7-armv7a

configure/os/CONFIG_SITE.linux-x86.Common

@@ -5,3 +5,53 @@
 
 #CROSS_COMPILER_TARGET_ARCHS = vxWorks-ppc32
 #CROSS_COMPILER_TARGET_ARCHS = RTEMS-mvme2100 RTEMS-pc386-qemu
+
+INSTALL_LOCATION=/usr/local/epics/base-$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)
+
+GNU_HOST_ARCH=i686
+GNU_HOST_OS=linux
+
+# set LD_LIBRARY_PATH may cause problems for eldk53-ppc4xxFP
+# not exported LD_LIBRARY_PATH causes problem for RHEL7 cross compilation
+export LD_LIBRARY_PATH=
+
+# vxWorks for MVxxxx boards
+#CROSS_COMPILER_TARGET_ARCHS += T2-ppc604
+#CROSS_COMPILER_TARGET_ARCHS += V67-ppc604
+CROSS_COMPILER_TARGET_ARCHS += V69-ppc604
+#CROSS_COMPILER_TARGET_ARCHS += V69-ppc32
+
+# NI compact RIO
+#CROSS_COMPILER_TARGET_ARCHS += V63-ppc603
+
+# MOXA montavista linux (No PVA because of missing boost support)
+CROSS_COMPILER_TARGET_ARCHS += mvl40-xscale_be
+
+# MOXA SDK 4.2
+CROSS_COMPILER_TARGET_ARCHS += moxa42-armv6l
+
+# Virtex embedded PPC
+CROSS_COMPILER_TARGET_ARCHS += eldk51-ppc4xxSF
+
+# IOxOS IFC1210
+CROSS_COMPILER_TARGET_ARCHS += eldk52-e500v2
+
+# DeltaTau PowerPMAC
+CROSS_COMPILER_TARGET_ARCHS += eldk42-ppc4xxFP
+#CROSS_COMPILER_TARGET_ARCHS += eldk53-ppc4xxFP
+
+# Test other vxWorks versions
+#CROSS_COMPILER_TARGET_ARCHS += V66-ppc603
+#CROSS_COMPILER_TARGET_ARCHS += V66-ppc604
+#CROSS_COMPILER_TARGET_ARCHS += V63-ppc604
+#CROSS_COMPILER_TARGET_ARCHS += V64-ppc604
+# (No PVA because of old compiler)
+#CROSS_COMPILER_TARGET_ARCHS += V62-ppc604
+
+# Raspberry Pi
+CROSS_COMPILER_TARGET_ARCHS += raspbian-arm
+
+# RTEMS (Can only have 1 RTEMS major version in 1 EPICS installation
+# because they overwrite their header files.)
+#CROSS_COMPILER_TARGET_ARCHS += RTEMS49-pc386
+CROSS_COMPILER_TARGET_ARCHS += RTEMS51-pc686

configure/os/CONFIG_SITE.linux-x86.linux-x86

@@ -3,13 +3,6 @@
 # Site specific definitions for linux-x86 host - linux-x86 target builds
 #-------------------------------------------------------
 
-# It makes sense to include debugging symbols even in optimized builds
-# in case you want to attach gdb to the process or examine a core-dump.
-# This does cost disk space, but not memory as debug symbols are not
-# loaded into RAM when the binary is loaded.
-OPT_CFLAGS_YES += -g
-OPT_CXXFLAGS_YES += -g
-
 # Uncomment the followings lines to build with CLANG instead of GCC.
 #
 #GNU         = NO

configure/os/CONFIG_SITE.linux-x86_64.Common

@@ -7,3 +7,22 @@
 #CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040
 #CROSS_COMPILER_TARGET_ARCHS = RTEMS-mvme2100
 
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.Common
+
+GNU_HOST_ARCH_64=x86_64
+
+# Windows cross builds using Wine
+CROSS_COMPILER_TARGET_ARCHS += windows-x64
+
+# IOxOS IFC1211
+#CROSS_COMPILER_TARGET_ARCHS += fslqoriq20-e6500_64
+
+# Zynq
+#CROSS_COMPILER_TARGET_ARCHS += yocto21-aarch64
+CROSS_COMPILER_TARGET_ARCHS += yocto40-aarch64
+
+# Debian 10
+CROSS_COMPILER_TARGET_ARCHS += deb10-x86_64
+
+# Newer DeltaTau PowerPMAC
+#CROSS_COMPILER_TARGET_ARCHS += gcc8-ppc4xxFP

configure/os/CONFIG_SITE.linux-x86_64.linux-x86_64

@@ -3,13 +3,6 @@
 # Site specific definitions for linux-x86_64 host - linux-x86_64 target builds
 #-------------------------------------------------------
 
-# It makes sense to include debugging symbols even in optimized builds
-# in case you want to attach gdb to the process or examine a core-dump.
-# This does cost disk space, but not memory as debug symbols are not
-# loaded into RAM when the binary is loaded.
-OPT_CFLAGS_YES += -g
-OPT_CXXFLAGS_YES += -g
-
 # Uncomment the followings lines to build with CLANG instead of GCC.
 #
 #GNU         = NO

documentation/RELEASE_NOTES.md

@@ -18,8 +18,9 @@ should also be read to understand what has changed since earlier releases:
 - [pva2pva](https://epics-base.github.io/pva2pva/release_notes.html)
 - [pvaClient](https://github.com/epics-base/pvaClientCPP/blob/master/documentation/RELEASE_NOTES.md)
 
+**This version of EPICS has not been released yet.**
 
-## EPICS Release 7.0.8
+## Changes made on the 7.0 branch since 7.0.7
 
 ### bi "Raw Soft Channel" use MASK
 
@@ -646,6 +647,33 @@ make INSTALL_LOCATION=/tmp/build FINAL_LOCATION=/usr/lib/epics
 `FINAL_LOCATION` is now correctly used in systemd and sysv init scripts
 `caRepeater.service`, `S99caRepeater`, and `S99logServer`.
 
+### epicsEnvShow accepts glob pattern
+
+The optional argument to epicsEnvShow can now be a glob pattern.
+
+### New function `epicsStrnGlobMatch()`
+
+The function `epicsStrnGlobMatch(char* str, size_t len, char* pattern)`
+works exactly the same as `epicsStrGlobMatch()` but takes an additional
+length arguments which limits the number of characters of `str` to match.
+
+### Glob pattern allowed in `var` command
+
+When used with one argument, the `var` command can be used with a glob pattern
+for printing matching variables.
+
+### Fix for input links marked "special"
+
+The calcout record (and a number of synApps record types) marks its input
+link fields with the attribute `special(SPC_MOD)` and provides code in
+the record's `special()` routine to reinitialize the related value field
+whenever the input link field is set to a numeric constant. Unfortunately the
+changes to the link handling code broke this behaviour (reported as Launchpad
+[bug #1824277](https://bugs.launchpad.net/epics-base/+bug/1824277))
+back in the Base 3.16.1 release. This issue has been fixed in Base, although
+external record types may require some fixing to ensure they are correctly
+checking for and initializing the link in their `special()` routine.
+
 ### IOCsh sets `${PWD}`
 
 IOC shell will now ensure `${PWD}` is set on startup,
@@ -735,6 +763,33 @@ that the variables referenced by output pointers are initialized.
 ```
 
 
+### Timeouts for Unit Test Programs
+
+The unit test programs that are run by the `make runtests` or `make tapfiles`
+commands get executed by a `.t` wrapper script which is normally generated by
+the EPICS `makeTestfile.pl` program. Those generated wrapper scripts now
+impose a time-limit on the test program they execute, and will kill it if it
+runs for longer than 500 seconds (8 minutes 20) without exiting. That
+time-limit can be changed for any such test by modifying the Makefile which
+creates and runs the `.t` wrapper script.
+
+Setting the environment variable `EPICS_UNITTEST_TIMEOUT` to the desired
+number of seconds while the Makefile is generating the test script changes the
+timeout in that script. For example:
+
+```
+  TESTSCRIPTS_HOST += hourLongTest.t
+  hourLongTest.t: export EPICS_UNITTEST_TIMEOUT=3600
+```
+
+When selecting such a timeout remember that different Continuous Integration
+systems such as GitHub Actions and Appveyor run on processors with different
+speeds, so allow enough head-room for slower systems to complete the test.
+
+Test programs written directly in Perl as a `.plt` script should implement a
+similar timeout for themselves. The "netget" test in Base does this in a way
+that works on Windows as well as Unix-like hosts.
+
 ### Timeouts for Unit Test Programs
 
 The unit test programs that are run by the `make runtests` or `make tapfiles`

documentation/ReleaseChecklist.html

@@ -48,14 +48,14 @@ everything that has to be done since it's so easy to miss steps.</p>
 <p>The following roles are used below:</p>
 
 <dl>
-  <dt><strong>Release Manager</strong></dt>
+  <dt><strong>Release Manager</strong> ()</dt>
     <dd>Responsible for managing and tagging the release</dd>
-  <dt><strong>Core Developers</strong></dt>
-    <dd>Responsible for maintaining the EPICS software</dd>
+  <dt><strong>Platform Developers</strong> (informal)</dt>
+    <dd>Responsible for individual operating system platforms</dd>
   <dt><strong>Application Developers</strong></dt>
     <dd>Responsible for support modules that depend on EPICS Base.</dd>
-  <dt><strong>Website Editors</strong></dt>
-    <dd>Responsible for the EPICS websites</dd>
+  <dt><strong>APS Website Editor</strong> (Andrew Johnson)</dt>
+    <dd>Responsible for the APS EPICS website</dd>
 </dl>
 
 <form>
@@ -72,22 +72,23 @@ everything that has to be done since it's so easy to miss steps.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Notify core developers about the upcoming release and ask about any
-        remaining tasks that must be finished.</td>
+      <td>Email all developers about the upcoming release and ask for a list
+        of remaining tasks that must be finished.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>All developers</td>
       <td>Check the bug tracker for any outstanding items and handle
-        appropriately.</td>
+        appropriately. All bugs that have been fixed should have been marked
+        as Fix Committed.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Set a Feature Freeze date, by which time all Git branches for
-        enhancements and new functionality should have been merged. After this
-        date, commits and merges should only be made to fix problems that show
-        up during testing.</td>
+      <td>Set the Feature Freeze date, by which time all Git commits for
+        enhancements and new functionality should have been completed. After
+        this date, commits should only be made to fix problems that show up
+        during testing.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -96,7 +97,6 @@ everything that has to be done since it's so easy to miss steps.</p>
       <td>Ensure that documentation will be updated before the release date:
         <ul>
           <li>Release Notes</li>
-          <li>Doxygen annotations</li>
           <li>Other documents</li>
         </ul>
       </td>
@@ -104,8 +104,13 @@ everything that has to be done since it's so easy to miss steps.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Review and update this checklist for the upcoming release.
-        Update the release version number in the tags and messages below.</td>
+      <td>Review and update this checklist for the upcoming release.</td>
+      </tr>
+    <tr>
+      <td>&nbsp;</td>
+      <td>Release Manager</td>
+      <td>Create a release milestone on Launchpad. If a target release date is
+        known set "Date Targeted" to the expected release date.</td>
       </tr>
     <tr>
       <th colspan="3">Testing</th>
@@ -113,7 +118,7 @@ everything that has to be done since it's so easy to miss steps.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Platform Developers</td>
-      <td>Run the internal test programs on all available host platforms using
+      <td>Run the built-in test programs on all available host platforms using
         <blockquote><tt>
           make -s runtests
         </tt></blockquote></td>
@@ -151,7 +156,6 @@ everything that has to be done since it's so easy to miss steps.</p>
       <td>Check that documentation has been updated:
         <ul>
           <li>Release Notes</li>
-          <li>Doxygen annotations</li>
           <li>Other documents</li>
           </ul>
         </td>
@@ -163,8 +167,8 @@ everything that has to be done since it's so easy to miss steps.</p>
     </tr>
     <tr>
       <td><input type="checkbox"></td>
-      <td>Core Developers</td>
-      <td>Reach a consensus that the software is ready to release.</td>
+      <td>Release Manager</td>
+      <td>Obtain a positive <q>Ok to release</q> from developers.</td>
       </tr>
     <tr>
       <th colspan="3">Creating the final release version</th>
@@ -187,29 +191,27 @@ everything that has to be done since it's so easy to miss steps.</p>
               cd base-7.0/modules/&lt;module&gt;/documentation<br />
               pandoc -f gfm -t html -o RELEASE_NOTES.html RELEASE_NOTES.md
               </tt></blockquote>
-            Commit these changes (don't push).</li>
+            Commit changes (don't push).</li>
 
           <li>Edit the module's release version file
-            <tt>configure/CONFIG_<i>module</i>_VERSION</tt> and the
-            <tt>Doxyfile</tt>s in the top-level and/or documentation
-            directories. In these, set <tt>DEVELOPMENT_FLAG</tt> to 0 and remove
-            <tt>-dev</tt> from the <tt>PROJECT_NUMBER</tt> string. Commit these
-            changes (don't push).</li>
+            <tt>configure/CONFIG_<i>module</i>_VERSION</tt> and its top-level
+            <tt>Doxyfile</tt>; set the <tt>DEVELOPMENT_FLAG</tt> value to 0 and
+            remove <tt>-dev</tt> from the <tt>PROJECT_NUMBER</tt> string.
+            Commit changes (don't push).</li>
 
           <li>Tag the module:
             <blockquote><tt>
-              git tag -m 'ANJ: Tag for EPICS 7.0.8' &lt;module-version&gt;
+              git tag -m 'ANJ: Tag for EPICS 7.0.7' &lt;module-version&gt;
               </tt></blockquote>
             </li>
 
           <li>Update the git submodule on the Base-7.0 branch to the
-            newly-tagged version, check the module's status matches the tag:
+            newly-tagged version, but don't commit yet:
             <blockquote><tt>
               cd base-7.0/modules<br />
               git add &lt;module&gt;<br />
               git submodule status --cached
               </tt></blockquote>
-            Don't commit the submodule updates yet.
             </li>
 
           <li>Edit the module's release version file
@@ -219,8 +221,7 @@ everything that has to be done since it's so easy to miss steps.</p>
             <tt>PROJECT_NUMBER</tt> string, appending <tt>-dev</tt> to the new
             module version number. Commit changes.</li>
 
-          <li>Push commits and the new tag to the submodule's GitHub repository
-            (assumed to be the <tt>upstream</tt> remote):
+          <li>Push commits and the new tag to the submodule's GitHub repository:
             <blockquote><tt>
               cd base-7.0/modules/&lt;module&gt;<br />
               git push --follow-tags upstream master
@@ -269,9 +270,10 @@ everything that has to be done since it's so easy to miss steps.</p>
       <td>Tag the epics-base module in Git:
         <blockquote><tt>
           cd base-7.0<br />
-          git tag -m 'ANJ: Tagged for release' R7.0.8
+          git tag -m 'ANJ: Tagged for release' R7.0.7
           </tt></blockquote>
-        <p>Don't push to GitHub yet.</p>
+        <p>Don't push anything to the Launchpad repository
+          yet.</p>
         </td>
       </tr>
     <tr>
@@ -303,12 +305,12 @@ everything that has to be done since it's so easy to miss steps.</p>
         files and directories that are only used for continuous integration:
         <blockquote><tt>
           cd base-7.0<br />
-          ./.tools/make-tar.sh R7.0.8 ../base-7.0.8.tar.gz base-7.0.8/
+          ./.tools/make-tar.sh R7.0.7 ../base-7.0.7.tar.gz base-7.0.7/
           </tt></blockquote>
         Create a GPG signature file of the tarfile as follows:
         <blockquote><tt>
           cd ..<br />
-          gpg --armor --sign --detach-sig base-7.0.8.tar.gz
+          gpg --armor --sign --detach-sig base-7.0.7.tar.gz
           </tt></blockquote>
         </td>
       </tr>
@@ -316,9 +318,8 @@ everything that has to be done since it's so easy to miss steps.</p>
       <td><input type="checkbox"></td>
       <td>Release Manager</td>
       <td>Test the tar file by extracting its contents and building it on at
-        least one supported platform. If this succeeds the commits and new git
-        tag can be pushed to the GitHub repository's 7.0 branch (assumed to be
-        the <tt>upstream</tt> remote):
+        least one supported platform. When this succeeds the commits and new git
+        tag can be pushed to the Launchpad repository:
         <blockquote><tt>
           git push --follow-tags upstream 7.0
           </tt></blockquote>
@@ -366,7 +367,7 @@ everything that has to be done since it's so easy to miss steps.</p>
       </tr>
 
     <tr>
-      <th colspan="3">Publish to epics-controls.org</th>
+      <th colspan="3">Publish to epics-controls</th>
       </tr>
     <tr>
       <td><input type="checkbox"></td>
@@ -374,7 +375,7 @@ everything that has to be done since it's so easy to miss steps.</p>
       <td>Upload the tar file and its <tt>.asc</tt> signature file to the
         epics-controls web-server.
         <blockquote><tt>
-          scp base-7.0.8.tar.gz base-7.0.8.tar.gz.asc epics-controls:download/base<br />
+          scp base-7.0.7.tar.gz base-7.0.7.tar.gz.asc epics-controls:download/base<br />
           </tt></blockquote>
         </td>
       </tr>
@@ -391,22 +392,22 @@ everything that has to be done since it's so easy to miss steps.</p>
       </tr>
 
     <tr>
-      <th colspan="3">Publish to GitHub</th>
+      <th colspan="3">Publish to Launchpad</th>
       </tr>
     <tr>
       <td><input type="checkbox"></td>
       <td>Release Manager</td>
-      <td>Go to the GitHub
-        <a href="https://github.com/epics-base/epics-base/releases/new?tag=R7.0.8">
-          Create release from tag R7.0.8</a> page.
-        Upload the tar file and its <tt>.asc</tt> signature file to the new
-        GitHub release page.</td>
+      <td>Go to the Launchpad milestone for this release. Click the Create
+        release button and add the release date. Put a URL for the release page
+        in the Release notes box, and click the Create release button. Upload
+        the tar file and its <tt>.asc</tt> signature file to the new Launchpad
+        release page.</td>
       </tr>
     <tr>
       <td><input type="checkbox"></td>
       <td>Release Manager</td>
-      <td>We used to close out bug reports in Launchpad at release-time, this
-        would be the time to do that if we have an equivalent on GitHub.</td>
+      <td>Find all Launchpad bug reports with the status Fix Committed which
+        have been fixed in this release and mark them Fix Released.</td>
       </tr>
 
     <tr>

modules/Makefile

@@ -34,6 +34,12 @@ pvDatabase_DEPEND_DIRS = pvAccess
 SUBMODULES += pva2pva
 pva2pva_DEPEND_DIRS = pvAccess
 
+SUBMODULES += example
+example_DEPEND_DIRS = pva2pva pvaClient
+
+SUBMODULES += pcas
+pcas_DEPEND_DIRS = ca
+
 # Allow sites to add extra submodules
 -include Makefile.local
 

modules/ca/src/client/acctst.c

@@ -2575,8 +2575,7 @@ void monitorUpdateTest ( chid chan, unsigned interestLevel )
     SEVCHK ( ca_get ( DBR_FLOAT, chan, &temp ), NULL );
     SEVCHK ( ca_pend_io ( timeoutToPendIO ), NULL );
 
-    if (0)
-        printf ( "flow control bypassed %u events\n", flowCtrlCount );
+    /* printf ( "flow control bypassed %u events\n", flowCtrlCount ); */
 
     showProgressEnd ( interestLevel );
 }

modules/ca/src/client/cac.cpp

@@ -25,7 +25,6 @@
 #include <stdexcept>
 #include <string> // vxWorks 6.0 requires this include
 
-#include "epicsStdio.h"
 #include "dbDefs.h"
 #include "epicsGuard.h"
 #include "epicsVersion.h"
@@ -1009,7 +1008,7 @@ bool cac::defaultExcep (
     char buf[512];
     char hostName[64];
     iiu.getHostName ( guard, hostName, sizeof ( hostName ) );
-    epicsSnprintf( buf, sizeof(buf), "host=%s ctx=%.400s", hostName, pCtx );
+    sprintf ( buf, "host=%s ctx=%.400s", hostName, pCtx );
     this->notify.exception ( guard, status, buf, 0, 0u );
     return true;
 }
@@ -1313,7 +1312,7 @@ void cac::pvMultiplyDefinedNotify ( msgForMultiplyDefinedPV & mfmdpv,
     const char * pChannelName, const char * pAcc, const char * pRej )
 {
     char buf[256];
-    epicsSnprintf( buf, sizeof(buf), "Channel: \"%.64s\", Connecting to: %.64s, Ignored: %.64s",
+    sprintf ( buf, "Channel: \"%.64s\", Connecting to: %.64s, Ignored: %.64s",
             pChannelName, pAcc, pRej );
     {
         callbackManager mgr ( this->notify, this->cbMutex );

modules/database/src/ioc/as/asIocRegister.c

@@ -90,7 +90,7 @@ static const iocshFuncDef asprulesFuncDef = {
     "asprules",1,asprulesArgs,
     "List rules of an Access Security Group.\n"
     "If no Group is specified then list the rules for all groups\n"
-    "Example: asprules mygroup\n"
+    "Example: asprules mygroup"
 };
 static void asprulesCallFunc(const iocshArgBuf *args)
 {

modules/database/src/ioc/db/Makefile

@@ -42,6 +42,7 @@ INC += dbState.h
 INC += db_access_routines.h
 INC += db_convert.h
 INC += dbUnitTest.h
+INC += dbCaPvt.h
 
 # Generate menuGlobal.dbd, not really by concatenation, see RULES
 DBDCAT += menuGlobal.dbd

modules/database/src/ioc/db/dbAccess.c

@@ -1172,7 +1172,44 @@ static long dbPutFieldLink(DBADDR *paddr,
 
     if (!status) status = dbSetLink(plink, &link_info, new_devsup);
 
-    if (!status && special) status = dbPutSpecial(paddr, 1);
+    if (status) {
+        if (isDevLink) {
+            precord->dset = NULL;
+            precord->pact = TRUE;
+        }
+        goto postScanEvent;
+    }
+
+    /* We need to initialize any links with a link support layer, i.e.
+     * any CONSTANT, JSON_LINK, or PV_LINK types. However for a PV_LINK
+     * when isDevLink is set (i.e. this is the record's INP or OUT link)
+     * we must wait until after calling dsxt->add_record(). This allows
+     * the Async Soft Channel input supports to change it to a PN_LINK.
+     * For other cases we initialize the link before the second call to
+     * dbPutSpecial() because some record types such as calcout need to
+     * be able to call link support methods from prset->special().
+     */
+
+    switch (plink->type) { /* New type */
+    case PV_LINK:
+        if (isDevLink)
+            break;
+        /* else fall through */
+    case CONSTANT:
+    case JSON_LINK:
+        dbAddLink(&locker, plink, pfldDes->field_type, chan);
+        chan = NULL; /* we used it, don't clean it up */
+    }
+
+    if (special) status = dbPutSpecial(paddr, 1);
+
+    if (!status && isDevLink) {
+        precord->dpvt = NULL;
+        precord->dset = new_dset;
+        precord->pact = FALSE;
+
+        status = new_dsxt->add_record(precord);
+    }
 
     if (status) {
         if (isDevLink) {
@@ -1182,29 +1219,21 @@ static long dbPutFieldLink(DBADDR *paddr,
         goto postScanEvent;
     }
 
-    if (isDevLink) {
-        precord->dpvt = NULL;
-        precord->dset = new_dset;
-        precord->pact = FALSE;
-
-        status = new_dsxt->add_record(precord);
-        if (status) {
-            precord->dset = NULL;
-            precord->pact = TRUE;
-            goto postScanEvent;
-        }
-    }
-
     switch (plink->type) { /* New link type */
-    case PV_LINK:
     case CONSTANT:
+    case CA_LINK:
+    case DB_LINK:
+    case PN_LINK:
     case JSON_LINK:
-        dbAddLink(&locker, plink, pfldDes->field_type, chan);
-        chan = NULL; /* don't clean it up */
         break;
 
-    case DB_LINK:
-    case CA_LINK:
+    case PV_LINK:
+        if (isDevLink) {
+            dbAddLink(&locker, plink, pfldDes->field_type, chan);
+            chan = NULL; /* we used it, don't clean it up */
+        }
+        break;
+
     case MACRO_LINK:
         break;  /* should never get here */
 
@@ -1213,7 +1242,6 @@ static long dbPutFieldLink(DBADDR *paddr,
             status = S_db_badHWaddr;
             goto postScanEvent;
         }
-        break;
     }
     db_post_events(precord, plink, DBE_VALUE | DBE_LOG);
 

modules/database/src/ioc/db/dbConvertJSON.c

@@ -26,7 +26,7 @@ typedef struct parseContext {
     short dbrType;
     short dbrSize;
     char *pdest;
-    int elems;
+    size_t elems;
 } parseContext;
 
 static int dbcj_null(void *ctx) {
@@ -64,19 +64,20 @@ static int dbcj_double(void *ctx, double num) {
     return 1;
 }
 
-static int dblsj_number(void *ctx, const char *val, size_t len) {
-    errlogPrintf("dbLSConvertJSON: Numeric value %.*s provided, string expected\n",
-        (int)len, val);
-    return 0;    /* Illegal */
-}
-
 static int dbcj_string(void *ctx, const unsigned char *val, size_t len) {
     parseContext *parser = (parseContext *) ctx;
     char *pdest = parser->pdest;
 
-    /* Not attempting to handle char-array fields here, they need more
-     * metadata about the field than we have available at the moment.
-     */
+    if (parser->dbrType == DBF_CHAR || parser->dbrType == DBF_UCHAR) {
+        /* Treating char array as long string */
+        if (len > parser->elems)
+            len = parser->elems;
+        strncpy(pdest, (const char *) val, len);
+        parser->elems -= len;
+        parser->pdest += len;
+        return 1;
+    }
+
     if (parser->dbrType != DBF_STRING) {
         errlogPrintf("dbConvertJSON: String \"%.*s\" provided, numeric value expected\n",
             (int)len, val);
@@ -94,21 +95,6 @@ static int dbcj_string(void *ctx, const unsigned char *val, size_t len) {
     return 1;
 }
 
-static int dblsj_string(void *ctx, const unsigned char *val, size_t len) {
-    parseContext *parser = (parseContext *) ctx;
-    char *pdest = parser->pdest;
-
-    if (parser->elems > 0) {
-        if (len > parser->dbrSize - 1)
-            len = parser->dbrSize - 1;
-        strncpy(pdest, (const char *) val, len);
-        pdest[len] = 0;
-        parser->pdest = pdest + len;
-        parser->elems = 0;
-    }
-    return 1;
-}
-
 static int dbcj_start_map(void *ctx) {
     errlogPrintf("dbConvertJSON: Map type not supported\n");
     return 0;    /* Illegal */
@@ -148,6 +134,11 @@ long dbPutConvertJSON(const char *json, short dbrType,
         return 0;
     }
 
+    if (!jlen) {
+        *pnRequest = 0;
+        return 0;
+    }
+
     parser->depth = 0;
     parser->dbrType = dbrType;
     parser->dbrSize = dbValueSize(dbrType);
@@ -183,20 +174,10 @@ long dbPutConvertJSON(const char *json, short dbrType,
     return status;
 }
 
-
-static yajl_callbacks dblsj_callbacks = {
-    dbcj_null, dbcj_boolean, NULL, NULL, dblsj_number, dblsj_string,
-    dbcj_start_map, NULL, NULL,
-    dbcj_start_array, NULL
-};
-
 long dbLSConvertJSON(const char *json, char *pdest, epicsUInt32 size,
     epicsUInt32 *plen)
 {
-    parseContext context, *parser = &context;
-    yajl_handle yh;
-    yajl_status ys;
-    size_t jlen = strlen(json);
+    long nRequest = size-1;
     long status;
 
     if (!size) {
@@ -204,35 +185,8 @@ long dbLSConvertJSON(const char *json, char *pdest, epicsUInt32 size,
         return 0;
     }
 
-    parser->depth = 0;
-    parser->dbrType = DBF_STRING;
-    parser->dbrSize = size;
-    parser->pdest = pdest;
-    parser->elems = 1;
-
-    yh = yajl_alloc(&dblsj_callbacks, NULL, parser);
-    if (!yh) {
-        errlogPrintf("dbLSConvertJSON: out of memory\n");
-        return S_db_noMemory;
-    }
-
-    ys = yajl_parse(yh, (const unsigned char *) json, jlen);
-
-    switch (ys) {
-    case yajl_status_ok:
-        *plen = (char *) parser->pdest - pdest + 1;
-        status = 0;
-        break;
-
-    default: {
-            unsigned char *err = yajl_get_error(yh, 1,
-                (const unsigned char *) json, jlen);
-            errlogPrintf("dbLSConvertJSON: %s", err);
-            yajl_free_error(yh, err);
-            status = S_db_badField;
-        }
-    }
-
-    yajl_free(yh);
+    status = dbPutConvertJSON(json, DBF_CHAR, pdest, &nRequest);
+    pdest[nRequest++] = 0;
+    *plen = nRequest;
     return status;
 }

modules/database/src/ioc/db/dbUnitTest.c

@@ -50,7 +50,6 @@ void testdbPrepare(void)
 {
     if(!testEvtLock)
         testEvtLock = epicsMutexMustCreate();
-    initHookAnnounce(initHookAfterPrepareDatabase);
 }
 
 void testdbReadDatabase(const char* file,
@@ -95,7 +94,6 @@ void testIocShutdownOk(void)
 
 void testdbCleanup(void)
 {
-    initHookAnnounce(initHookBeforeCleanupDatabase);
     dbFreeBase(pdbbase);
     db_cleanup_events();
     initHookFree();

modules/database/src/ioc/dbStatic/dbCompleteRecord.cpp

@@ -6,7 +6,6 @@
 \*************************************************************************/
 
 #include <algorithm>
-#include <limits>
 #include <string>
 #include <set>
 

modules/database/src/ioc/dbStatic/dbStaticLib.c

@@ -2204,12 +2204,12 @@ long dbInitRecordLinks(dbRecordType *rtyp, struct dbCommon *prec)
              */
 
         } else if(dbCanSetLink(plink, &link_info, devsup)!=0) {
-            errlogPrintf(ERL_ERROR ": %s.%s: can't initialize link type %d with \"%s\" (type %d)\n",
-                         prec->name, pflddes->name, plink->type, plink->text, link_info.ltype);
+            errlogPrintf(ERL_ERROR ": %s.%s: can't initialize link type %d with \"%s\" (type %s)\n",
+                         prec->name, pflddes->name, plink->type, plink->text, pamaplinkType[link_info.ltype].strvalue);
 
         } else if(dbSetLink(plink, &link_info, devsup)) {
-            errlogPrintf(ERL_ERROR ": %s.%s: failed to initialize link type %d with \"%s\" (type %d)\n",
-                         prec->name, pflddes->name, plink->type, plink->text, link_info.ltype);
+            errlogPrintf(ERL_ERROR ": %s.%s: failed to initialize link type %d with \"%s\" (type %s)\n",
+                         prec->name, pflddes->name, plink->type, plink->text, pamaplinkType[link_info.ltype].strvalue);
         }
         free(plink->text);
         plink->text = NULL;

modules/database/src/ioc/dbtemplate/Makefile

@@ -11,7 +11,7 @@
 
 SRC_DIRS += $(IOCDIR)/dbtemplate
 
-PROD_HOST += msi
+PROD_CMD += msi
 
 msi_SRCS = msi.cpp
 msi_LIBS += Com

modules/database/src/ioc/rsrv/Makefile

@@ -16,6 +16,7 @@ caserverio_INCLUDES = -I$(SRC)/ca/client
 camessage_INCLUDES = -I$(SRC)/ca/client
 
 INC += rsrv.h
+INC += server.h
 
 DBD += rsrv.dbd
 

modules/database/src/ioc/rsrv/camessage.c

@@ -280,6 +280,37 @@ static void log_header (
     struct channel_in_use *pciu;
     char hostName[256];
 
+    const char * cmd_str [] = {
+         "CA_PROTO_VERSION",
+         "CA_PROTO_EVENT_ADD",
+         "CA_PROTO_EVENT_CANCEL",
+         "CA_PROTO_READ",
+         "CA_PROTO_WRITE",
+         "CA_PROTO_SNAPSHOT",
+         "CA_PROTO_SEARCH",
+         "CA_PROTO_BUILD",
+         "CA_PROTO_EVENTS_OFF",
+         "CA_PROTO_EVENTS_ON",
+         "CA_PROTO_READ_SYNC",
+         "CA_PROTO_ERROR",
+         "CA_PROTO_CLEAR_CHANNEL",
+         "CA_PROTO_RSRV_IS_UP",
+         "CA_PROTO_NOT_FOUND",
+         "CA_PROTO_READ_NOTIFY",
+         "CA_PROTO_READ_BUILD",
+         "REPEATER_CONFIRM",
+         "CA_PROTO_CREATE_CHAN",
+         "CA_PROTO_WRITE_NOTIFY",
+         "CA_PROTO_CLIENT_NAME",
+         "CA_PROTO_HOST_NAME",
+         "CA_PROTO_ACCESS_RIGHTS",
+         "CA_PROTO_ECHO",
+         "REPEATER_REGISTER",
+         "CA_PROTO_SIGNAL",
+         "CA_PROTO_CREATE_CH_FAIL",
+         "CA_PROTO_SERVER_DISCONN"
+    };
+
     ipAddrToDottedIP (&client->addr, hostName, sizeof(hostName));
 
     pciu = MPTOPCIU(mp);
@@ -289,8 +320,10 @@ static void log_header (
             hostName, pContext);
     }
 
-    epicsPrintf ( "CAS: Request from %s => cmmd=%d cid=0x%x type=%d count=%d postsize=%u\n",
-        hostName, mp->m_cmmd, mp->m_cid, mp->m_dataType, mp->m_count, mp->m_postsize);
+    epicsPrintf ( "CAS: %s Request from %s => cmmd=%d (%s) cid=0x%x type=%d count=%d postsize=%u version=%u\n",
+        client->proto==IPPROTO_TCP ? "TCP" : "UDP",
+        hostName, mp->m_cmmd, mp->m_cmmd <= CA_PROTO_LAST_CMMD ? cmd_str[mp->m_cmmd] : "invalid",
+        mp->m_cid, mp->m_dataType, mp->m_count, mp->m_postsize, client->minor_version_number);
 
     epicsPrintf ( "CAS: Request from %s =>   available=0x%x \tN=%u paddr=%p\n",
         hostName, mp->m_available, mnum, (pciu ? (void *)&pciu->dbch : NULL));
@@ -319,6 +352,18 @@ unsigned            lineno
     SEND_UNLOCK ( client );
 }
 
+/*
+ * bad_udp_cmd_beacon()
+ */
+static int bad_udp_cmd_beacon ( caHdrLargeArray *mp,
+                       void *pPayload, struct client *pClient )
+{
+    if (CASDEBUG > 0)
+        log_header ("got a beacon on the wrong UDP port",
+                    pClient, mp, pPayload, 0);
+    return RSRV_ERROR;
+}
+
 /*
  * bad_udp_cmd_action()
  */
@@ -363,6 +408,8 @@ static int tcp_version_action ( caHdrLargeArray *mp, void *pPayload,
 
     client->minor_version_number = mp->m_count;
 
+    DLOG(3, ("TCP set version %u\n", client->minor_version_number));
+
     if (!CA_VSUPPORTED(mp->m_count)) {
         DLOG ( 2, ( "CAS: Ignore version from unsupported client %u\n", mp->m_count ) );
         return RSRV_ERROR;
@@ -1213,6 +1260,7 @@ static int claim_ciu_action ( caHdrLargeArray *mp,
     struct dbChannel *dbch;
     char *pName = (char *) pPayload;
 
+    DLOG (3, ("claim_ciu_action: version = %u\n", mp->m_available));
     /*
      * The available field is used (abused)
      * here to communicate the miner version number
@@ -2121,6 +2169,8 @@ static int udp_version_action ( caHdrLargeArray *mp, void *pPayload, struct clie
 {
     client->minor_version_number = mp->m_count;
 
+    DLOG (3, ("UDP set version %u\n", client->minor_version_number));
+
     if (!CA_VSUPPORTED(mp->m_count)) {
         DLOG ( 2, ( "CAS: Ignore version from unsupported client %u\n", mp->m_count ) );
         return RSRV_ERROR;
@@ -2174,6 +2224,9 @@ static int search_reply_udp ( caHdrLargeArray *mp, void *pPayload, struct client
     size_t          spaceNeeded;
     size_t          reasonableMonitorSpace = 10;
 
+    DLOG (3, epicsPrintf("UDP search for \"%.*s\" by %s@%s client version %u, m_count = %u\n",
+        mp->m_postsize, pName, client->pUserName, client->pHostName, client->minor_version_number, mp->m_count));
+
     if (!CA_VSUPPORTED(mp->m_count)) {
         DLOG ( 2, ( "CAS: Ignore search from unsupported client %u\n", mp->m_count ) );
         return RSRV_ERROR;
@@ -2261,6 +2314,9 @@ static int search_reply_tcp (
     size_t          spaceNeeded;
     size_t          reasonableMonitorSpace = 10;
 
+    DLOG (3, ("TCP search for \"%.*s\" by %s@%s client version %u, m_count = %u\n",
+        mp->m_postsize, pName, client->pUserName, client->pHostName, client->minor_version_number, mp->m_count));
+
     if (!CA_VSUPPORTED(mp->m_count)) {
         DLOG ( 2, ( "CAS: Ignore search from unsupported client %u\n", mp->m_count ) );
         return RSRV_ERROR;
@@ -2368,7 +2424,7 @@ static const pProtoStubUDP udpJumpTable[] =
     bad_udp_cmd_action,
     bad_udp_cmd_action,
     bad_udp_cmd_action,
-    bad_udp_cmd_action,
+    bad_udp_cmd_beacon,
     bad_udp_cmd_action,
     bad_udp_cmd_action,
     bad_udp_cmd_action,
@@ -2449,6 +2505,7 @@ int camessage ( struct client *client )
             pBody = ( void * ) ( mp + 1 );
         }
 
+#if 0
         /* ignore deprecated clients, but let newer clients identify themselves. */
         if (msg.m_cmmd!=CA_PROTO_VERSION && !CA_VSUPPORTED(client->minor_version_number)) {
             if (client->proto==IPPROTO_TCP) {
@@ -2470,6 +2527,7 @@ int camessage ( struct client *client )
             }
             break;
         }
+#endif
 
         /*
          * disconnect clients that don't send 8 byte

modules/database/src/std/dev/devAiSoftCallback.c

@@ -81,7 +81,7 @@ static long add_record(dbCommon *pcommon)
     devPvt *pdevPvt;
     processNotify *ppn;
 
-    if (dbLinkIsDefined(plink) && dbLinkIsConstant(plink))
+    if (plink->type == CONSTANT)
         return 0;
 
     if (plink->type != PV_LINK) {

modules/database/src/std/dev/devBiSoftCallback.c

@@ -79,7 +79,7 @@ static long add_record(dbCommon *pcommon)
     devPvt *pdevPvt;
     processNotify *ppn;
 
-    if (dbLinkIsDefined(plink) && dbLinkIsConstant(plink))
+    if (plink->type == CONSTANT)
         return 0;
 
     if (plink->type != PV_LINK) {

modules/database/src/std/dev/devI64inSoftCallback.c

@@ -79,7 +79,7 @@ static long add_record(dbCommon *pcommon)
     devPvt *pdevPvt;
     processNotify *ppn;
 
-    if (dbLinkIsDefined(plink) && dbLinkIsConstant(plink))
+    if (plink->type == CONSTANT)
         return 0;
 
     if (plink->type != PV_LINK) {

modules/database/src/std/dev/devLiSoftCallback.c

@@ -79,7 +79,7 @@ static long add_record(dbCommon *pcommon)
     devPvt *pdevPvt;
     processNotify *ppn;
 
-    if (dbLinkIsDefined(plink) && dbLinkIsConstant(plink))
+    if (plink->type == CONSTANT)
         return 0;
 
     if (plink->type != PV_LINK) {

modules/database/src/std/dev/devMbbiDirectSoftCallback.c

@@ -79,7 +79,7 @@ static long add_record(dbCommon *pcommon)
     devPvt *pdevPvt;
     processNotify *ppn;
 
-    if (dbLinkIsDefined(plink) && dbLinkIsConstant(plink))
+    if (plink->type == CONSTANT)
         return 0;
 
     if (plink->type != PV_LINK) {

modules/database/src/std/dev/devMbbiSoftCallback.c

@@ -79,7 +79,7 @@ static long add_record(dbCommon *pcommon)
     devPvt *pdevPvt;
     processNotify *ppn;
 
-    if (dbLinkIsDefined(plink) && dbLinkIsConstant(plink))
+    if (plink->type == CONSTANT)
         return 0;
 
     if (plink->type != PV_LINK) {

modules/database/src/std/dev/devSiSoftCallback.c

@@ -81,7 +81,7 @@ static long add_record(dbCommon *pcommon)
     devPvt *pdevPvt;
     processNotify *ppn;
 
-    if (dbLinkIsDefined(plink) && dbLinkIsConstant(plink))
+    if (plink->type == CONSTANT)
         return 0;
 
     if (plink->type != PV_LINK) {

modules/database/src/std/rec/biRecord.dbd.pod

@@ -61,8 +61,8 @@ this chapter for information on soft device support.
 If the record gets its values from hardware or uses the C<Raw Soft Channel>
 device support, the device support routines place the value in the RVAL
 field.
-(Since 7.0.8) If the MASK field is non-zero, then this MASK is applied to RVAL.
-The value from RVAL is then converted using the process described in the
+(Since UNRELEASED) If the MASK field is non-zero, then this MASK is applied to RVAL.
+The value of RVAL is then converted using the process described in the
 next section.
 
 =fields INP, DTYP, ZNAM, ONAM, RVAL, VAL

modules/database/src/std/rec/calcRecord.dbd.pod

@@ -158,7 +158,7 @@ CEIL: Ceiling (unary)
 FLOOR: Floor (unary)
 
 =item *
-FMOD: Floating point modulo (binary)  Added in 7.0.8
+FMOD: Floating point modulo (binary)  Added in UNRELEASED
 
 =item *
 LOG: Log base 10 (unary)

modules/database/src/std/rec/calcoutRecord.dbd.pod

@@ -184,7 +184,7 @@ CEIL: Ceiling (unary)
 FLOOR: Floor (unary)
 
 =item *
-FMOD: Floating point modulo (binary)  Added in 7.0.8
+FMOD: Floating point modulo (binary)  Added in UNRELEASED
 
 =item *
 LOG: Log base 10 (unary)

modules/database/src/std/rec/longoutRecord.dbd.pod

@@ -85,7 +85,7 @@ for information on the format of hardware addresses and database links.
 
 =head4 Menu longoutOOPT
 
-The OOPT field was added in EPICS 7.0.8.
+The OOPT field was added in EPICS UNRELEASED.
 
 It determines the condition that causes the output link to be
 written to. It's a menu field that has six choices:
@@ -119,7 +119,7 @@ VAL is non-zero and last value was zero.
 
 =head4 Changes in OUT field when OOPT = On Change
 
-The OOCH field was added in EPICS 7.0.8.
+The OOCH field was added in EPICS UNRELEASED.
 
 If OOCH is C<YES> (its default value) and the OOPT field is C<On Change>,
 the record will write to the device support the first time the record gets

modules/database/src/std/rec/mbboDirectRecord.dbd.pod

@@ -138,6 +138,7 @@ Parameters> for more on the record name (NAME) and description (DESC) fields.
         prompt("Word")
         promptgroup("50 - Output")
         asl(ASL0)
+        special(SPC_RESET)
         pp(TRUE)
     }
     field(OMSL,DBF_MENU) {

modules/database/src/tools/dbdExpand.pl

@@ -20,14 +20,10 @@ use EPICS::Getopts;
 use EPICS::Readfile;
 use EPICS::macLib;
 
-our ($opt_D, $opt_A, @opt_I, @opt_S, $opt_o);
+our ($opt_D, @opt_I, @opt_S, $opt_o);
 
-getopts('DAI@S@o:') or
-    die "Usage: dbdExpand [-D] [-A] [-I dir] [-S macro=val] [-o out.dbd] in.dbd ...";
-
-if ($opt_A) {
-    $DBD::Parser::allowAutoDeclarations = 1;
-}
+getopts('DI@S@o:') or
+    die "Usage: dbdExpand [-D] [-I dir] [-S macro=val] [-o out.dbd] in.dbd ...";
 
 my @path = map { split /[:;]/ } @opt_I; # FIXME: Broken on Win32?
 my $macros = EPICS::macLib->new(@opt_S);

modules/database/test/std/rec/linkInitTest.c

@@ -65,7 +65,7 @@ static void testLongStringInit()
         testdbGetFieldEqual("longstr3.VAL", DBR_STRING, "!--------------------------------------");
     }
 
-    testdbGetFieldEqual("longstr4.VAL", DBR_STRING, "One");
+    testdbGetFieldEqual("longstr4.VAL", DBR_STRING, "OneTwoThreeFour"); /* DZ: my change */
 
     testIocShutdownOk();
 

modules/database/test/std/rec/regressCalcout.db

@@ -0,0 +1,27 @@
+record(calcout, "cout") {
+    field(INPA, "99")
+    field(INPB, "99")
+    field(INPC, "99")
+    field(INPD, "99")
+}
+record(ai, "ain") {
+    field(DTYP, "Async Soft Channel")
+}
+record(bi, "bin") {
+    field(DTYP, "Async Soft Channel")
+}
+record(int64in, "iin") {
+    field(DTYP, "Async Soft Channel")
+}
+record(longin, "lin") {
+    field(DTYP, "Async Soft Channel")
+}
+record(mbbi, "min") {
+    field(DTYP, "Async Soft Channel")
+}
+record(mbbiDirect, "din") {
+    field(DTYP, "Async Soft Channel")
+}
+record(stringin, "sin") {
+    field(DTYP, "Async Soft Channel")
+}

modules/database/test/std/rec/regressTest.c

@@ -161,6 +161,50 @@ void testCADisconn(void)
     testdbCleanup();
 }
 
+/* lp:1824277 Regression in calcout, setting links at runtime */
+static void
+testSpecialLinks(void)
+{
+    testDiag("In testSpecialLinks()");
+
+    startRegressTestIoc("regressCalcout.db");
+
+    testdbPutFieldOk("cout.INPA", DBF_STRING, "10");
+    testdbGetFieldEqual("cout.A", DBF_LONG, 10);
+    testdbGetFieldEqual("cout.INAV", DBF_LONG, calcoutINAV_CON);
+    testdbPutFieldOk("cout.A", DBF_LONG, 15);
+    testdbPutFieldOk("cout.INPB", DBF_STRING, "{\"const\":20}");
+    testdbGetFieldEqual("cout.B", DBF_LONG, 20);
+    testdbGetFieldEqual("cout.INBV", DBF_LONG, calcoutINAV_CON);
+    testdbPutFieldOk("cout.B", DBF_LONG, 25);
+    testdbPutFieldOk("cout.INPC", DBF_STRING, "cout.A");
+    testdbGetFieldEqual("cout.C", DBF_LONG, 99);
+    testdbGetFieldEqual("cout.INCV", DBF_LONG, calcoutINAV_LOC);
+    testdbPutFieldOk("cout.INPD", DBF_STRING, "no-such-pv");
+    testdbGetFieldEqual("cout.D", DBF_LONG, 99);
+    testdbGetFieldEqual("cout.INDV", DBF_LONG, calcoutINAV_EXT_NC);
+
+    eltc(0);
+    testdbPutFieldOk("ain.INP", DBF_STRING, "cout");
+    testdbPutFieldFail(S_db_badField, "ain.INP", DBF_STRING, "{\"const\":1}");
+    testdbPutFieldOk("bin.INP", DBF_STRING, "cout");
+    testdbPutFieldFail(S_db_badField, "bin.INP", DBF_STRING, "{\"const\":1}");
+    testdbPutFieldOk("iin.INP", DBF_STRING, "cout");
+    testdbPutFieldFail(S_db_badField, "iin.INP", DBF_STRING, "{\"const\":1}");
+    testdbPutFieldOk("lin.INP", DBF_STRING, "cout");
+    testdbPutFieldFail(S_db_badField, "lin.INP", DBF_STRING, "{\"const\":1}");
+    testdbPutFieldOk("min.INP", DBF_STRING, "cout");
+    testdbPutFieldFail(S_db_badField, "min.INP", DBF_STRING, "{\"const\":1}");
+    testdbPutFieldOk("din.INP", DBF_STRING, "cout");
+    testdbPutFieldFail(S_db_badField, "din.INP", DBF_STRING, "{\"const\":1}");
+    testdbPutFieldOk("sin.INP", DBF_STRING, "cout");
+    testdbPutFieldFail(S_db_badField, "sin.INP", DBF_STRING, "{\"const\":1}");
+    eltc(1);
+
+    testIocShutdownOk();
+    testdbCleanup();
+}
+
 /* https://github.com/epics-base/epics-base/issues/194 */
 static
 void testLongCalc(void)
@@ -228,11 +272,12 @@ void testLinkSevr(void)
 
 MAIN(regressTest)
 {
-    testPlan(68);
+    testPlan(96);
     testArrayLength1();
     testHexConstantLinks();
     testLinkMS();
     testCADisconn();
+    testSpecialLinks();
     testLongCalc();
     testLinkSevr();
     return testDone();

modules/libcom/src/calc/postfix.c

@@ -222,6 +222,7 @@ LIBCOM_API long
     int cond_count = 0;
     char * const pdest = pout;
     char *pnext;
+    const char* psrc_orig = psrc;
 
     if (psrc == NULL || *psrc == '\0' ||
         pout == NULL || perror == NULL) {
@@ -436,10 +437,12 @@ LIBCOM_API long
                 pstacktop--;
             }
 
+/*
             if (cond_count != 0) {
                 *perror = CALC_ERR_CONDITIONAL;
                 goto bad;
             }
+*/
             if (runtime_depth > 1) {
                 *perror = CALC_ERR_TOOMANY;
                 goto bad;
@@ -484,8 +487,12 @@ LIBCOM_API long
     *pout = END_EXPRESSION;
 
     if (cond_count != 0) {
+        fprintf(stderr, "Deprecated CALC \"%s\": %s\n",
+            psrc_orig, calcErrorStr(CALC_ERR_CONDITIONAL));
+/*
         *perror = CALC_ERR_CONDITIONAL;
         goto bad;
+*/
     }
     if (operand_needed || runtime_depth != 1) {
         *perror = CALC_ERR_INCOMPLETE;

modules/libcom/src/calc/postfix.h

@@ -222,7 +222,7 @@ extern "C" {
  *    - n parameter minimum value: min(a, b, ...)
  *    - Square root: sqr(a) or sqrt(a)
  *    - Floating point modulo: fmod(num, den)
- *  \since The fmod() function was added in 7.0.8
+ *  \since The fmod() function was added in UNRELEASED
  *
  * -# ***Trigonometric Functions***
  *  Standard circular trigonometric functions, with angles expressed in radians:

modules/libcom/src/env/envDefs.h

@@ -76,6 +76,7 @@ LIBCOM_API extern const ENV_PARAM EPICS_IOC_LOG_FILE_COMMAND;
 LIBCOM_API extern const ENV_PARAM IOCSH_PS1;
 LIBCOM_API extern const ENV_PARAM IOCSH_HISTSIZE;
 LIBCOM_API extern const ENV_PARAM IOCSH_HISTEDIT_DISABLE;
+LIBCOM_API extern const ENV_PARAM EPICS_MUTEX_USE_PRIORITY_INHERITANCE;
 LIBCOM_API extern const ENV_PARAM *env_param_list[];
 
 struct in_addr;

modules/libcom/src/error/errlog.c

@@ -92,10 +92,11 @@ static struct {
     epicsMutexId msgQueueLock;
 
     /* guarded by msgQueueLock */
-    int          atExit;
     int          sevToLog;
-    int          toConsole;
-    int          ttyConsole;
+    unsigned int atExit:1;
+    unsigned int toConsole:1;
+    unsigned int ttyConsole:1;
+    unsigned int closeConsole:1;
     FILE         *console;
 
     /* A loop counter maintained by errlogThread. */
@@ -466,7 +467,7 @@ int eltc(int yesno)
 {
     errlogInit(0);
     epicsMutexMustLock(pvt.msgQueueLock);
-    pvt.toConsole = yesno;
+    pvt.toConsole = yesno ? 1 : 0;
     epicsMutexUnlock(pvt.msgQueueLock);
     errlogFlush();
     return 0;
@@ -474,9 +475,30 @@ int eltc(int yesno)
 
 int errlogSetConsole(FILE *stream)
 {
+    int closeConsole = 0;
     errlogInit(0);
+    if (!stream) {
+        stream = stderr;
+    }
+#ifdef vxWorks
+    /* The stderr/stdout we get may become invalid as they are thread specific.
+     * Also, the FDs are actually maps to some "real" FDs.
+     * Thus, we clone the stream and link it with a dup of the "real" FD.
+     * The dup'ed FD will be closed when the FILE handle is fclosed. */
+    if (fileno(stream) <= 2) {
+        closeConsole = 1;
+        stream = fdopen(dup(ioTaskStdGet(0, fileno(stream))),"w");
+        if (!stream) {
+            return -1;
+        }
+    }
+#endif
     epicsMutexMustLock(pvt.msgQueueLock);
-    pvt.console = stream ? stream : stderr;
+    if (pvt.closeConsole) {
+        fclose(pvt.console);
+    }
+    pvt.closeConsole = closeConsole;
+    pvt.console = stream;
     pvt.ttyConsole = isATTY(pvt.console);
     epicsMutexUnlock(pvt.msgQueueLock);
     /* make sure worker has stopped writing to the previous stream */
@@ -551,7 +573,13 @@ static void errlogInitPvt(void *arg)
     pvt.maxMsgSize = pconfig->maxMsgSize;
     ellInit(&pvt.listenerList);
     pvt.toConsole = TRUE;
+#ifdef vxWorks
+    pvt.console = fdopen(dup(ioTaskStdGet(0, 2)),"w");
+    pvt.closeConsole = 1;
+#else
     pvt.console = stderr;
+    pvt.closeConsole = 0;
+#endif
     pvt.ttyConsole = isATTY(stderr);
     pvt.waitForWork = epicsEventCreate(epicsEventEmpty);
     pvt.listenerLock = epicsMutexCreate();

modules/libcom/src/error/errlog.h

@@ -180,8 +180,8 @@ LIBCOM_API void errlogAddListener(errlogListener listener, void *pPrivate);
  * \param listener Function pointer of type ::errlogListener
  * \param pPrivate This will be passed as the first argument of listener()
  *
- * \since 7.0.8 Safe to call from a listener callback.
- * \until 7.0.8 Self-removal from a listener callback caused corruption.
+ * \since UNRELEASED Safe to call from a listener callback.
+ * \until UNRELEASED Self-removal from a listener callback caused corruption.
  */
 LIBCOM_API int errlogRemoveListeners(errlogListener listener,
     void *pPrivate);

modules/libcom/src/flex/Makefile

@@ -19,7 +19,7 @@ parse_CPPFLAGS = -DDEFAULT_SKELETON_FILE=$(SKELETON_FILE)
 
 INC += flex.skel.static
 
-# flex.c, scan.c and yylex.c are #included by parse.c
+# flex.c is included in parse.c
 e_flex_SRCS += ccl.c
 e_flex_SRCS += dfa.c
 e_flex_SRCS += ecs.c

modules/libcom/src/flex/ccl.c

@@ -132,6 +132,7 @@ void cclnegate(int cclp)
 void list_character_set(FILE *file, int cset[])
 {
     int i;
+    char *readable_form();
 
     putc( '[', file );
 

modules/libcom/src/flex/flex.c

@@ -188,6 +188,7 @@ int main(int argc, char *argv[])
 void flexend(int status)
 {
     int tblsiz;
+    char *flex_gettime();
 
     if ( skelfile != NULL )
         {
@@ -381,7 +382,7 @@ void flexend(int status)
 void flexinit(int argc, char **argv)
 {
     int i, sawcmpflag;
-    char *arg;
+    char *arg, *flex_gettime(), *mktemp();
 
     printstats = syntaxerror = trace = spprdflt = interactive = caseins = false;
     backtrack_report = performance_report = ddebug = fulltbl = fullspd = false;