Update CONFIG_BASE_VERSION for 3.15.5, remove "not released" from RELEASE_NOTES

if we fetch it from eventSysProcess()

Makefile

@@ -6,9 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-#
-# $Revision-Id$
-#
 
 TOP = .
 include $(TOP)/configure/CONFIG

README

@@ -2,14 +2,14 @@
 EPICS Base - the central core of a control system toolkit
 ---------------------------------------------------------
 
-Copyright UChicago Argonne LLC, as Operator of Argonne
-National Laboratory.
+Copyright (c) 1991-2003 The University of Chicago, as Operator
+of Argonne National Laboratory.
 Copyright (c) 1991-2003 The Regents of the University of
 California, as Operator of Los Alamos National Laboratory.
 
-EPICS Base is distributed subject to a Software License
-Agreement found in the file LICENSE that is included with
-this distribution.
+EPICS Base Versions 3.13.7 and higher are distributed
+subject to a Software License Agreement found in the
+file LICENSE that is included with this distribution.
 
 ---------------------------------------------------------
 

configure/CONFIG

@@ -6,8 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
-#
-#  $Revision-Id$
 
 #
 #  Common build definitions

configure/CONFIG.CrossCommon

@@ -3,9 +3,8 @@
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
 # Cross compiler default definitions
 
@@ -27,6 +26,6 @@ CROSS_LDFLAGS = $(addprefix -L,$(GNU_TARGET_LIB_DIR))
 CMPLR_PREFIX_CROSS=$(addsuffix -,$(GNU_TARGET))
 CMPLR_PREFIX=$(CMPLR_PREFIX_$(BUILD_CLASS))
 
-# All cross builds use the gnu compiler
+# Cross builds usually use the gnu compiler
 include $(CONFIG)/CONFIG.gnuCommon
 

configure/CONFIG.gnuCommon

@@ -7,7 +7,7 @@
 # and higher are distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-#--------------------------------------------------
+
 # GNU compiler defaults
 
 GNU = YES

configure/CONFIG_ADDONS

@@ -6,7 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-# $Revision-Id$
 #
 #	check for add-on CFLAGS and CXXFLAGS
 #

configure/CONFIG_APP_INCLUDE

@@ -6,9 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
-#
-#  $Revision-Id$
-#
 
 export TOP
 

configure/CONFIG_BASE

@@ -3,12 +3,13 @@
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 #---------------------------------------------------------------
-# EPICS Base directories
+# Epics base directories
 
 EPICS_BASE_HOST_BIN = $(EPICS_BASE)/bin/$(EPICS_HOST_ARCH)
 EPICS_BASE_HOST_LIB = $(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)
@@ -18,12 +19,12 @@ ifdef T_A
 endif
 
 #---------------------------------------------------------------
-# EPICS Base Ioc libraries 
+# Epics base Ioc libraries 
 
 EPICS_BASE_IOC_LIBS += dbRecStd dbCore ca Com 
 
 #---------------------------------------------------------------
-# EPICS Base Host libraries 
+# Epics base Host libraries 
 
 EPICS_BASE_HOST_LIBS += cas gdd
 EPICS_BASE_HOST_LIBS += ca Com
@@ -41,11 +42,13 @@ endif # BASE_TOP
 #---------------------------------------------------------------
 # Base c preprocessor flags
 
+BASE_CPPFLAGS = 
+
 # osithread default stack
 OSITHREAD_USE_DEFAULT_STACK = NO
 OSITHREAD_DEFAULT_STACK_FLAGS_YES = -DOSITHREAD_USE_DEFAULT_STACK
-
-BASE_CPPFLAGS = $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))
+OSITHREAD_DEFAULT_STACK_FLAGS_NO =
+BASE_CPPFLAGS += $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))
 
 #---------------------------------------------------------------
 # Where to find the installed build tools
@@ -56,7 +59,7 @@ TOOLS = $(abspath $(EPICS_BASE_HOST_BIN))
 FIND_TOOL = $(firstword $(wildcard $(TOOLS)/$(1) $(TOP)/src/tools/$(1)))
 
 #---------------------------------------------------------------
-# EPICS Base build tools and tool flags
+# Epics base build tools and tool flags
 
 MAKEBPT                    = $(TOOLS)/makeBpt$(HOSTEXE)
 DBEXPAND                   = $(PERL) $(TOOLS)/dbdExpand.pl
@@ -65,11 +68,11 @@ DBTOMENUH                  = $(PERL) $(TOOLS)/dbdToMenuH.pl
 REGISTERRECORDDEVICEDRIVER = $(PERL) $(TOOLS)/registerRecordDeviceDriver.pl
 CONVERTRELEASE             = $(PERL) $(call FIND_TOOL,convertRelease.pl)
 FULLPATHNAME               = $(PERL) $(TOOLS)/fullPathName.pl
-GENVERSIONHEADER           = $(PERL) $(TOOLS)/genVersionHeader.pl $(QUIET_FLAG)
 
-#---------------------------------------------------------------
+#-------------------------------------------------------
 # tools for installing libraries and products
-INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(QUIET_FLAG)
+INSTALL_QUIETLY := $(if $(findstring s,$(MAKEFLAGS)),-q,)
+INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(INSTALL_QUIETLY)
 INSTALL_PRODUCT = $(INSTALL)
 INSTALL_LIBRARY = $(INSTALL)
 
@@ -79,7 +82,7 @@ MKMF                       = $(PERL) $(TOOLS)/mkmf.pl
 REPLACEVAR                 = $(PERL) $(TOOLS)/replaceVAR.pl
 
 #---------------------------------------------------------------
-# Our versions of lex (flex) and yacc (antelope)
+# private versions of lex/yacc from EPICS
 EYACC = $(TOOLS)/antelope$(HOSTEXE)
 ELEX = $(TOOLS)/e_flex$(HOSTEXE) -S$(EPICS_BASE)/include/flex.skel.static
 
@@ -87,6 +90,28 @@ YACC  = $(EYACC)
 LEX   = $(ELEX)
 
 #---------------------------------------------------------------
-# The 3.15 version of msi supports new options
+# Our use of msi is incompatible with older versions
 
 MSI3_15 = $(EPICS_BASE_HOST_BIN)/msi
+
+#---------------------------------------------------------------
+# External tools and tool flags - must be in path or defined in application
+
+ADL2DL ?= adl2dl
+
+# sch2edif compiler and flags
+SCH2EDIF = sch2edif
+SCH2EDIF_PATH =
+SCH2EDIF_SYSFLAGS = -n -ap -p.+..+$(SCH2EDIF_PATH)+$(CAPFAST_TEMPLATES)/sym+
+SCH2EDIF_FLAGS =
+ 
+# e2db and flags
+#    - again there is an assumption where edb.def is installed.
+E2DB ?= e2db
+E2DB_SYSFLAGS = -ate -d $(CAPFAST_TEMPLATES)/edb.def
+E2DB_FLAGS =
+
+DBST ?= dbst
+
+
+

configure/CONFIG_BASE_VERSION

@@ -7,8 +7,6 @@
 # in the file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
-#  $Revision-Id$
-#
 #  EPICS Version information
 #
 # Only the person making an official EPICS release should make changes in
@@ -17,34 +15,23 @@
 # EPICS_SITE_VERSION is defined in CONFIG_SITE for sites that want a local
 # version number to be included in the reported version string.
 
-# We define BASE_3_14 and BASE_3_15 as NO and BASE_3_16 as YES, so
-#   ifdef BASE_3_14
-#       true for 3.14 or later
-#   ifdef BASE_3_15
-#       true for 3.15 or later
-#   ifeq ($(BASE_3_14),YES)
-#       true for 3.14.x only
-#   ifeq ($(BASE_3_15),YES)
-#       true for 3.15 only
-#   ifeq ($(BASE_3_16),YES)
-#       true for 3.16 only.
-
+# In 3.15 we still define BASE_3_14 so "ifdef BASE_3_14" means
+# 3.14 or later, but "ifeq ($(BASE_3_14),YES)" means 3.14 only.
 BASE_3_14 = NO
-BASE_3_15 = NO
-BASE_3_16 = YES
+BASE_3_15 = YES
 
 # EPICS_VERSION must be a number >0 and <256
 EPICS_VERSION = 3
 
-# EPICS_REVISION must be a number >=0 and <256 
-EPICS_REVISION = 16
+# EPICS_REVISION must be a number >=0 and <256
+EPICS_REVISION = 15
 
-# EPICS_MODIFICATION must be a number >=0 and <256 
-EPICS_MODIFICATION = 0
+# EPICS_MODIFICATION must be a number >=0 and <256
+EPICS_MODIFICATION = 5
 
 # EPICS_PATCH_LEVEL must be a number (win32 resource file requirement)
 # Not included if zero
-EPICS_PATCH_LEVEL = 1
+EPICS_PATCH_LEVEL = 0
 
 # This will end in -DEV between official releases
 #EPICS_DEV_SNAPSHOT=-DEV
@@ -72,4 +59,5 @@ EPICS_SHORT_VERSION=$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)$(EP
 EPICS_VERSION_NUMBER=$(EPICS_SHORT_VERSION)$(EPICS_DEV_SNAPSHOT)$(EPICS_SITE_VSTRING)
 EPICS_VERSION_STRING="EPICS Version $(EPICS_VERSION_NUMBER)"
 
-COMMIT_DATE="\$$Date$$"
+# Provide this in case anyone is still using the old name
+COMMIT_DATE="-no-date-"

configure/CONFIG_COMMON

@@ -7,8 +7,6 @@
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
-#  $Revision-Id$
-#
 #  CONFIG_COMMON
 #
 #  This file is to be maintained by the community.
@@ -40,6 +38,10 @@ BUILD_ARCHS = $(EPICS_HOST_ARCH) $(CROSS1) $(CROSS2)
 # otherwise override this in os/CONFIG_SITE.<host_arch>.Common
 PERL = perl -CSD
 
+#-------------------------------------------------------
+# dbst based database optimization default
+DB_OPT = NO
+
 #-------------------------------------------------------
 # Check configure/RELEASE file for consistency
 CHECK_RELEASE_YES = checkRelease
@@ -81,7 +83,6 @@ IOCS_APPL_TOP               = $(shell $(FULLPATHNAME) $(INSTALL_LOCATION))
 # Make echo output - suppress echoing if make's '-s' flag is set
 NOP = :
 ECHO = @$(if $(findstring s,$(patsubst T_A=%,,$(MAKEFLAGS))),$(NOP),echo)
-QUIET_FLAG := $(if $(findstring s,$(MAKEFLAGS)),-q,)
 
 #-------------------------------------------------------
 ifdef T_A
@@ -331,20 +332,12 @@ COMPILE.cpp = $(CCC) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES)
 # C preprocessor command
 PREPROCESS.cpp = $(CPP) $(CPPFLAGS) $(INCLUDES) $< > $@
 
-#--------------------------------------------------
-# genVersion header defaults
-
-# C macro name
-GENVERSIONMACRO = VCSVERSION
-# C macro default value (empty to use date+time)
-GENVERSIONDEFAULT =
-
 #--------------------------------------------------
 # Header dependency file generation
 
 HDEPENDS_METHOD = MKMF
 
-HDEPENDS_MKMFFLAGS = -m $*$(DEP) $(INCLUDES) $@
+HDEPENDS_MKMFFLAGS = -m $@ $(INCLUDES) $*$(OBJ)
 HDEPENDS_MKMF.c   = $(MKMF) $(HDEPENDS_FLAGS) $(HDEPENDS_MKMFFLAGS)
 HDEPENDS_MKMF.cpp = $(MKMF) $(HDEPENDS_FLAGS) $(HDEPENDS_MKMFFLAGS)
 

configure/CONFIG_ENV

@@ -7,7 +7,6 @@
 # and higher are distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-#   $Revision-Id$
 #   Author: Andrew Johnson
 #   Date:   20 April 1995
 #

configure/CONFIG_FILE_TYPE

@@ -6,7 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
-# $Revision-Id$
 #
 # Macros and rules to create a new installation file type 
 #

configure/CONFIG_SITE

@@ -6,8 +6,7 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
-#
-#  $Revision-Id$
+
 #
 #  CONFIG_SITE  - Global site configuration file
 #
@@ -118,6 +117,13 @@ CROSS_COMPILER_TARGET_ARCHS=
 #  configure/os/CONFIG_SITE.<host>.Common files instead.
 CROSS_COMPILER_HOST_ARCHS=
 
+#  The 'make runtests' and 'make tapfiles' build targets normally only run
+#  self-tests for the EPICS_HOST_ARCH architecture. If the host can execute
+#  the self-test programs for any other cross-built architectures such as
+#  a -debug architecture, those architectures can be named here.
+#
+CROSS_COMPILER_RUNTEST_ARCHS=
+
 # Build shared libraries (DLLs on Windows).
 #  Must be either YES or NO.  Definitions in the target-specific
 #  os/CONFIG.Common.<target> and os/CONFIG_SITE.Common.<target> files may

configure/CONFIG_SITE_ENV

@@ -6,7 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-#	$Revision-Id$
 #	Author:	Andrew Johnson
 #	Date:	1 May 1995
 #
@@ -30,10 +29,8 @@
 #	local timezone info for vxWorks and RTEMS IOCs.  The format is
 #	    <name>::<minutesWest>:<start daylight>:<end daylight>
 #	where the start and end are mmddhh - that is month,day,hour
-#	e.g. for ANL in 2015: EPICS_TIMEZONE=CST/CDT::360:030802:110102
+#	e.g. for ANL in 2016: EPICS_TIMEZONE=CST/CDT::360:031302:110602
 #
-#	DST for 2015  US: Mar 08 - Nov 01
-#	              EU: Mar 29 - Oct 25
 #	DST for 2016  US: Mar 13 - Nov 06
 #	              EU: Mar 27 - Oct 30
 #	DST for 2017  US: Mar 12 - Nov 05
@@ -42,11 +39,15 @@
 #	              EU: Mar 25 - Oct 28
 #	DST for 2019  US: Mar 10 - Nov 03
 #	              EU: Mar 31 - Oct 27
-#	(see: http://www.timeanddate.com/time/map/)
+#	DST for 2020  US: Mar 08 - Nov 01
+#	              EU: Mar 29 - Oct 25
+#	DST for 2021  US: Mar 14 - Nov 07
+#	              EU: Mar 28 - Oct 31
+#	(see: http://www.timeanddate.com/time/dst/2016.html etc. )
 #
-# These values are for 2015:
-EPICS_TIMEZONE=CST/CDT::360:030802:110102
-#EPICS_TIMEZONE=CET/CEST::-60:032902:102502
+# These values are for 2016:
+EPICS_TIMEZONE=CST/CDT::360:031302:110602
+#EPICS_TIMEZONE=CET/CEST::-60:032702:103002
 
 # EPICS_TS_NTP_INET
 #	NTP time server ip address.  Uses boot host if not set.
@@ -57,11 +58,8 @@ EPICS_TS_NTP_INET=
 #	Prompt string
 # IOCSH_HISTSIZE
 #	Number of lines of command history to keep.
-# IOCSH_HISTEDIT_DISABLE
-# 	Prevents use of readline or equivalent if defined.
 IOCSH_PS1="epics> "
 IOCSH_HISTSIZE=50
-IOCSH_HISTEDIT_DISABLE=
 
 # Log Server:
 # EPICS_IOC_LOG_INET 

configure/Makefile

@@ -6,9 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-#
-# $Revision-Id$
-#
 
 TOP=..
 

configure/RULES

@@ -7,7 +7,6 @@
 # and higher are distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-# $Revision-Id$
 
 ifndef T_A
 

configure/RULES.Db

@@ -8,12 +8,10 @@
 #*************************************************************************
 #RULES.Db
 
-# Set db substitutions and template file suffixes
+# Set db substitutions file suffix
 SUBST_SUFFIX ?= .substitutions
-TEMPL_SUFFIX ?= .template
 
-#---------------------------------------------------------------
-# vpath
+#####################################################  vpath
 
 vpath %.pm $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.pod $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
@@ -21,13 +19,12 @@ vpath %.dbd $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.db $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %.vdb $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %$(SUBST_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
-vpath %$(TEMPL_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
+vpath %.template $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath bpt%.data $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acf $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acs $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 
-#---------------------------------------------------------------
-# dbflags dbdflags
+##################################################### dbflags dbdflags
 
 DBD_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DBD) $(RELEASE_DBD_DIRS)
 DB_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DB) $(RELEASE_DB_DIRS)
@@ -36,15 +33,13 @@ DBDFLAGS = $(USR_DBDFLAGS) $(CMD_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
 DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(CMD_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
 REGRDDFLAGS = $(DBDFLAGS) $($*_REGRDDFLAGS) $(USR_REGRDDFLAGS) $(CMD_REGRDDFLAGS)
 
-#---------------------------------------------------------------
-# Targets
+##################################################### Targets
 
 # ---------------------------------------------------
 # To allow os specific dbd files AND have the -j option work properly,
 
-CROSS_TARGET_OS_TYPES = $(sort $(foreach target, \
-    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS), \
-    $(firstword $(subst -, ,$(target)))))
+CROSS_TARGET_OS_TYPES = $(sort $(foreach target,  \
+    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS),$(firstword $(subst -, ,$(target)))))
 DBD += $(foreach type, $(CROSS_TARGET_OS_TYPES), $(DBD_$(type)))
 
 # Users add os specific dbd files to a Makefile as follows
@@ -91,28 +86,31 @@ SOURCE_DB_bbb = $(foreach dir, $(GENERIC_SRC_DIRS), $(SOURCE_DB_aaa)  )
 SOURCE_DB_aaa = $(addsuffix /$(file), $(dir) )
 
 COMMONS = $(COMMON_DIR)/*.dbd $(COMMON_DIR)/*.db $(COMMON_DIR)/*.h \
-          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*$(TEMPL_SUFFIX)
+          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*.template
 
 # Remove trailing numbers (to 99) on stem
-TEMPLATE1 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
-            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
-            $(patsubst %8,%,$(patsubst %9,%,$*))))))))))
-TEMPLATE2 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
-            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
-            $(patsubst %8,%,$(patsubst %9,%,$(TEMPLATE1)))))))))))
-TEMPLATE3 = $(addsuffix $(TEMPL_SUFFIX),$(addprefix ../,$(TEMPLATE2)))
-TEMPLATE_FILENAME = $(firstword $(wildcard $($*_TEMPLATE) \
-            $(addprefix ../,$($*_TEMPLATE)) ../$*$(TEMPL_SUFFIX) $(TEMPLATE3) \
-            ../template))
+TEMPLATE1=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
+          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
+          $*))))))))))
+TEMPLATE2=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
+          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
+          $(TEMPLATE1)))))))))))
+TEMPLATE3=$(addsuffix .template,$(addprefix ../,$(TEMPLATE2)))
+TEMPLATE_FILENAME=$(firstword $(wildcard $($*_TEMPLATE) $(addprefix ../,$($*_TEMPLATE)) ../$*.template $(TEMPLATE3) ../template))
+
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+RAW=.raw
+DBS = $(filter %.db,$(DB)) $(addsuffix $(RAW),$(filter %.db,$(DB)))
+COMMON_DBS = $(addprefix $(COMMON_DIR)/,$(DBS))
+endif
 
 INSTALL_DB_INSTALLS = $(addprefix $(INSTALL_DB)/,$(notdir $(DB_INSTALLS)))
 INSTALL_DBD_INSTALLS = $(addprefix $(INSTALL_DBD)/,$(notdir $(DBD_INSTALLS)))
 
 COMMONDEP_TARGET = $(COMMON_DIR)/$(basename $@)
 
-#---------------------------------------------------------------
-# acf files
-
+#####################################################  acf files
 # An access security configuration file, *.acf, can be created from
 # an *.acs file (has format of acf file plus #include "filename" lines)
 
@@ -125,8 +123,7 @@ ACF_INCLUDES = -I. $(TARGET_INCLUDES) $(USR_INCLUDES)\
 ACFDEPENDS_CMD = $(MKMF) -m $@ $(ACF_INCLUDES) $(COMMONDEP_TARGET) $<
 ACF_CMD = $(CPP) $(ACF_CPPFLAGS) $(ACF_INCLUDES) $< > $@
 
-#---------------------------------------------------------------
-# dependencies
+#####################################################  dependancies
 
 HINC += $(addsuffix .h,$(DBDINC_NAME))
 COMMON_DBDINC += $(addprefix $(COMMON_DIR)/,$(HINC))
@@ -136,12 +133,12 @@ DBDDEPENDS_FILES += $(addsuffix $(DEP),$(HINC) \
                     $(patsubst $(COMMON_DIR)/%,%, \
                     $(filter-out $(COMMON_DIR)/bpt%.dbd,$(COMMON_DBDS))))
 
-#---------------------------------------------------------------
+##################################################### 
 
 ifndef T_A
 
 DEP = .d
-TEMPLATE3 += $(addsuffix $(TEMPL_SUFFIX), $(TEMPLATE2))
+TEMPLATE3+=$(addsuffix .template, $(TEMPLATE2))
 
 COMMON_DIR = .
 INSTALL_DBDS =
@@ -156,13 +153,18 @@ ACTIONS += install
 ACTIONS += buildInstall
 ACTIONS += runtests tapfiles
 
-actionArchTargets = $(foreach action, $(ACTIONS), \
-    $(foreach arch, $(BUILD_ARCHS), $(action)$(DIVIDER)$(arch)))
-cleanArchTargets = $(foreach arch, $(BUILD_ARCHS), clean$(DIVIDER)$(arch))
+actionArchTargets = $(foreach x, $(ACTIONS),\ $(foreach arch,$(BUILD_ARCHS), $(x)$(DIVIDER)$(arch)))
 
+cleanArchTargets = $(foreach arch,$(BUILD_ARCHS), clean$(DIVIDER)$(arch))
 -include $(TOP)/configure/CONFIG_APP_INCLUDE
 
 all: install
+ifeq ($(EPICS_HOST_ARCH),$T_A)
+host: install
+else
+# Do nothing
+host:
+endif
 
 install: buildInstall
 
@@ -170,30 +172,20 @@ buildInstall : build
 
 rebuild: clean install
 
-.PHONY: all $(ACTIONS)
+.PHONY: all host $(ACTIONS)
 
 $(actionArchTargets) $(BUILD_ARCHS): install
 $(cleanArchTargets): clean
 
 .PHONY: $(BUILD_ARCHS) $(actionArchTargets) $(cleanArchTargets)
 
-else
-  # T_A is defined
-  ifeq ($(EPICS_HOST_ARCH),$(T_A))
-    host: install
-  else
-    host:
-  endif
-
-  .PHONY: host
-endif # T_A
+endif # T_A defined
 
 ifneq (,$(strip $(DBDDEPENDS_FILES)))
 -include $(DBDDEPENDS_FILES)
 endif
 
-#---------------------------------------------------------------
-# build dependancies, clean rule
+#####################################################  build dependancies, clean rule
 
 inc : $(COMMON_INC) $(INSTALL_INC)
 
@@ -213,8 +205,7 @@ db_clean :
 
 realclean: clean
 
-#---------------------------------------------------------------
-# Dependency files
+##################################################### Dependency files
 
 %Record.h$(DEP): $(COMMON_DIR)/%Record.dbd
 	@$(RM) $@
@@ -265,19 +256,19 @@ menu%.h$(DEP): ../menu%.dbd
 	@$(DBEXPAND) -D $(DBDFLAGS) -o $(COMMONDEP_TARGET) $($*_DBD) > $@
 	@echo "$(COMMONDEP_TARGET): ../Makefile" >> $@
 
-%.db$(DEP): %$(SUBST_SUFFIX)
+%.db$(RAW)$(DEP): %$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(DEP): ../%$(SUBST_SUFFIX)
+%.db$(RAW)$(DEP): ../%$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(DEP): %$(TEMPL_SUFFIX)
+%.db$(RAW)$(DEP): %.template
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
-%.db$(DEP): ../%$(TEMPL_SUFFIX)
+%.db$(RAW)$(DEP): ../%.template
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
@@ -291,8 +282,14 @@ menu%.h$(DEP): ../menu%.dbd
 
 .PRECIOUS: %$(DEP)
 
-#---------------------------------------------------------------
-# Substitution files
+##################################################### CapFast filter
+
+$(COMMON_DIR)/%.edf: ../%.sch $(DEPSCHS) 
+	@$(RM) $@
+	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
+	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) -o $@  $<
+
+##################################################### Substitution files
 
 #  WARNING: CREATESUBSTITUTIONS script needs output dir on command line
 
@@ -313,21 +310,25 @@ $(INSTALL_DB)/%$(SUBST_SUFFIX): ../%$(SUBST_SUFFIX)
 
 .PRECIOUS: $(COMMON_DIR)/%$(SUBST_SUFFIX)
 
-#---------------------------------------------------------------
-# Template files
+##################################################### Template files
 
-$(INSTALL_DB)/%$(TEMPL_SUFFIX): %$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.template: $(COMMON_DIR)/%.edf 
+	@$(RM) $@
+	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $@.VAR $<
+	@$(REPLACEVAR) < $@.VAR > $@
+	@$(RM) $@.VAR
+
+$(INSTALL_DB)/%.template: %.template
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-$(INSTALL_DB)/%$(TEMPL_SUFFIX): ../%$(TEMPL_SUFFIX)
+$(INSTALL_DB)/%.template: ../%.template
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-.PRECIOUS: $(COMMON_DIR)/%$(TEMPL_SUFFIX)
+.PRECIOUS: $(COMMON_DIR)/%.template
 
-#---------------------------------------------------------------
-# INC files
+##################################################### INC files
 
 $(COMMON_DIR)/%Record.h: $(COMMON_DIR)/%Record.dbd
 	@$(RM) $(notdir $@)
@@ -361,8 +362,7 @@ $(COMMON_DIR)/menu%.h: ../menu%.dbd
 
 .PRECIOUS: $(COMMON_DIR)/%.h
 
-#---------------------------------------------------------------
-# DBD files
+##################################################### DBD files
 
 $(COMMON_DIR)/bpt%.dbd: bpt%.data
 	@$(RM) $(notdir $@)
@@ -425,8 +425,7 @@ $(foreach file, $(DBD_INSTALLS), $(eval $(call DBD_INSTALLS_template, $(file))))
 
 .PRECIOUS: $(COMMON_DBDS) $(COMMON_DIR)/%.dbd
 
-#---------------------------------------------------------------
-# HTML files
+##################################################### HTML files
 
 $(COMMON_DIR)/%.html: %.dbd.pod $(TOOLS)/dbdToHtml.pl
 	@$(RM) $(notdir $@)
@@ -445,44 +444,37 @@ $(COMMON_DIR)/%.html: %.pm $(TOOLS)/podToHtml.pl
 
 $(COMMON_DIR)/%.html: ../%.pm $(TOOLS)/podToHtml.pl
 	@$(RM) $(notdir $@)
-	$(PERL) $(TOOLS)/podToHtml.pl -s -o $(notdir $@) $<
-	@$(MKDIR) $(dir $@)
-	@$(MV) $(notdir $@) $@
-
-$(COMMON_DIR)/%.html: ../%.pl $(TOOLS)/podToHtml.pl
-	@$(RM) $(notdir $@)
-	$(PERL) $(TOOLS)/podToHtml.pl -s -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
 .PRECIOUS: $(COMMON_DIR)/%.html %.html
 
-#---------------------------------------------------------------
-# DB files
+##################################################### DB files
 
-$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.edf 
+$(COMMON_DIR)/%.db$(RAW): $(COMMON_DIR)/%.edf 
 	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $*.VAR $<
 	@$(REPLACEVAR) < $*.VAR > $@
 	@$(RM) $*.VAR
 
-$(COMMON_DIR)/%.db: %$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): %$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: ../%$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): ../%$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: %$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): %.template
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: ../%$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): ../%.template
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
@@ -500,6 +492,22 @@ $(COMMON_DIR)/%.acf: ../%.acs
 
 .PRECIOUS: $(COMMON_DIR)/%.acf
 
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+
+$(COMMON_DIR)/%.db$(RAW): ../%.db
+	@$(RM) $@
+	$(CP) $< $@
+
+$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.db$(RAW)
+	$(ECHO) "Optimizing database $@"
+	@$(RM) $@
+	$(DBST) . $< -d > $@
+
+.PRECIOUS: $(COMMON_DIR)/%.db
+.PRECIOUS: $(DB:%=$(COMMON_DIR)/%$(RAW))
+else
+
 $(INSTALL_DB)/%: %
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -507,6 +515,7 @@ $(INSTALL_DB)/%: %
 $(INSTALL_DB)/%: ../%
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
+endif
 
 $(INSTALL_DB)/%.db: $(COMMON_DIR)/%.db
 	$(ECHO) "Installing created db file $@"
@@ -522,8 +531,8 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 .PRECIOUS: $(COMMON_DIR)/%.edf
 .PRECIOUS: $(COMMON_DBS)
 
-#---------------------------------------------------------------
-# register record,device,driver support
+##################################################### register record,device,driver support
+
 
 %_registerRecordDeviceDriver.cpp: $(COMMON_DIR)/%.dbd
 	@$(RM) $@
@@ -539,3 +548,4 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 
 .PRECIOUS: %_registerRecordDeviceDriver.cpp
 
+##################################################### END OF FILE

configure/RULES.ioc

@@ -24,11 +24,15 @@ else
     clean$(DIVIDER)$(ARCH) clean:
 endif
 
-cdCommands envPaths dllPath.bat relPaths.sh: \
+cdCommands dllPath.bat relPaths.sh: \
     $(wildcard $(TOP)/configure/RELEASE*) \
-    $(wildcard $(TOP)/configure/CONFIG_SITE*) $(INSTALL_BIN)
+    $(wildcard $(TOP)/configure/CONFIG_SITE*) | $(INSTALL_BIN)
 	$(CONVERTRELEASE) -a $(ARCH) -t $(IOCS_APPL_TOP) $@
 
+envPaths: $(wildcard $(TOP)/configure/RELEASE*) \
+    $(wildcard $(TOP)/configure/CONFIG_SITE*) | $(INSTALL_BIN)
+	$(CONVERTRELEASE) -t $(IOCS_APPL_TOP) $@
+
 realclean:
 	$(RM) cdCommands envPaths dllPath.bat relPaths.sh
 

configure/RULES_ARCHS

@@ -6,9 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution. 
 #*************************************************************************
-#
-# $Revision-Id$
-#
 
 all: install
 host: install$(DIVIDER)$(EPICS_HOST_ARCH)

configure/RULES_BUILD

@@ -6,7 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution. 
 #*************************************************************************
-# $Revision-Id$
 #
 #	Rules for making things specified in Makefile
 #
@@ -106,13 +105,17 @@ endif
 PRODTARGETS += $(PRODNAME) $(MUNCHNAME) $(CTDT_SRCS) $(CTDT_OBJS) $(NMS)
 
 #---------------------------------------------------------------
-#   Generate a test specification if any tests are defined.
+#   Test specifications and test result files
 #
 ifneq (,$(strip $(TESTS)))
 TARGETS += testspec
 endif
 
+# Enable testing if this host can run tests on the current target
+ifneq (,$(findstring $(T_A),$(EPICS_HOST_ARCH) $(CROSS_COMPILER_RUNTEST_ARCHS)))
+RUNTESTS_ENABLED = YES
 TAPFILES += $(TESTSCRIPTS:.t=.tap)
+endif
 
 #---------------------------------------------------------------
 #   Libraries 
@@ -168,9 +171,15 @@ ifdef RES
 endif
 
 $(DIRECTORY_TARGETS) :
-	$(MKDIR) $@
+	$(MKDIR) -p $@
 
-$(PRODNAME): $(INSTALL_LIB_INSTALLS)
+# Install LIB_INSTALLS libraries before linking executables
+$(TESTPRODNAME) $(PRODNAME): | $(INSTALL_LIB_INSTALLS)
+
+# Install built libraries too, unless Makefile says to wait
+ifneq ($(DELAY_INSTALL_LIBS),YES)
+$(TESTPRODNAME) $(PRODNAME): | $(INSTALL_LIBS) $(INSTALL_DLLSTUB_LIBS)
+endif
 
 # RELEASE file consistency checking
 checkRelease:
@@ -319,7 +328,9 @@ $(MODNAME): %$(MODEXT): %$(EXE)
 # Automated testing
 
 runtests: $(TESTSCRIPTS)
+ifdef RUNTESTS_ENABLED
 	-$(PERL) -MTest::Harness -e 'runtests @ARGV if @ARGV;' $^
+endif
 
 testspec: $(TESTSCRIPTS)
 	@$(RM) $@
@@ -333,7 +344,9 @@ tapfiles: $(TESTSCRIPTS) $(TAPFILES)
 
 # A .tap file is the output from running the associated test script
 %.tap: %.t
+ifdef RUNTESTS_ENABLED
 	-$(PERL) $< -tap > $@
+endif
 
 # If there's a perl test script (.plt) available, use it
 %.t: ../%.plt
@@ -346,14 +359,6 @@ tapfiles: $(TESTSCRIPTS) $(TAPFILES)
 	@$(RM) $@
 	$(PERL) $(TOOLS)/makeTestfile.pl $@ $<
 
-#---------------------------------------------------------------
-# Generate header with version number from VCS
-
-ifneq ($(GENVERSION),)
-$(COMMON_DIR)/$(GENVERSION): FORCE
-	$(GENVERSIONHEADER) -t $(TOP) -N $(GENVERSIONMACRO) -V "$(GENVERSIONDEFAULT)" $@
-endif
-
 #---------------------------------------------------------------
 # Install rules for BIN_INSTALLS and LIB_INSTALLS
 
@@ -487,7 +492,7 @@ $(INSTALL_TEMPLATES_SUBDIR)/%: %
 .PRECIOUS: $(COMMON_INC)
 
 .PHONY: all host inc build install clean rebuild buildInstall build_clean
-.PHONY: runtests tapfiles checkRelease warnRelease noCheckRelease FORCE
+.PHONY: runtests tapfiles checkRelease warnRelease noCheckRelease
 
 endif # BASE_RULES_BUILD
 #	EOF RULES_BUILD

configure/RULES_DIRS

@@ -6,10 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution. 
 #*************************************************************************
-#
-#  $Revision-Id$
-#
-
 
 ARCHS += $(BUILD_ARCHS)
 ACTIONS += inc build install buildInstall clean realclean archclean

configure/RULES_EXPAND

@@ -14,8 +14,6 @@ EXPANDFLAGS += $(addprefix -D ,$(EXPAND_VARS))
 # The names of files to be expanded must end with '@'
 EXPANDED = $(EXPAND:%@=%)
 
-buildInstall: $(EXPANDED)
-
 $(EXPANDED): %: %@
 	$(ECHO) "Expanding $< to $@"
 	@$(RM) $@
@@ -26,7 +24,8 @@ clean: expand_clean
 expand_clean:
 	@$(RM) $(EXPANDED)
 
-.PHONY : expand_clean
+.PRECIOUS: $(EXPANDED)
+.PHONY: expand_clean
 
 #---------------------------------------------------------------
 # Assemblies (files assembled from snippets)

configure/RULES_FILE_TYPE

@@ -6,9 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
-#
-# $Revision-Id$
-#
 
 # Include <top>/configure/RULES_BUILD from tops defined in RELEASE* files
 #

configure/RULES_OCTAVE

@@ -7,9 +7,7 @@
 # and higher are distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
-# $Revision-Id$
-#
-#-------------------------------------------------------
+
 # Octave definitions and rules
 
 ifeq ($(findstring Host,$(VALID_BUILDS)),Host)

configure/RULES_TARGET

@@ -8,8 +8,6 @@
 # in file LICENSE that is included with this distribution.
 #*************************************************************************
 #
-#  $Revision-Id$
-#
 #  RULES_TARGET
 #
 #  This file is to be maintained by the community.

configure/RULES_TOP

@@ -6,9 +6,6 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
-#
-# $Revision-Id$
-#
 
 include $(CONFIG)/RULES_DIRS
 

configure/os/CONFIG.Common.RTEMS

@@ -1,7 +1,6 @@
 #
 # This file contains definitions for RTEMS builds
 #
-# $Revision-Id$
 # Author: W. Eric Norum
 #         University of Saskatchewan
 #         eric.norum@usask.ca

configure/os/CONFIG.Common.RTEMS-beatnik

@@ -1,6 +1,5 @@
 #
 # CONFIG.Common.RTEMS-beatnik
-# $Revision-Id$
 # Author: Dayle Kotturi <dayle@slac.stanford.edu>
 #
 # All RTEMS targets use the same Makefile fragment

configure/os/CONFIG.Common.RTEMS-gen68360

@@ -1,5 +1,4 @@
 #
-# $Revision-Id$
 # Author: W. Eric Norum
 #         Canadian Light Source
 #         eric@cls.usask.ca

configure/os/CONFIG.Common.RTEMS-mcp750

@@ -1,5 +1,4 @@
 #
-# $Revision-Id$
 # Author: W. Eric Norum
 #         Canadian Light Source
 #         eric@cls.usask.ca

configure/os/CONFIG.Common.RTEMS-mvme167

@@ -1,5 +1,4 @@
 #
-# $Revision-Id$
 # Author: W. Eric Norum
 #         Canadian Light Source
 #         eric@cls.usask.ca

configure/os/CONFIG.Common.RTEMS-mvme2100

@@ -1,6 +1,5 @@
 #
 # CONFIG.Common.RTEMS-mvme2100
-# $Revision-Id$
 # Author: W. Eric Norum <wenorum@lbl.gov>
 #
 # All RTEMS targets use the same Makefile fragment

configure/os/CONFIG.Common.RTEMS-mvme3100

@@ -1,6 +1,5 @@
 #
 # CONFIG.Common.RTEMS-mvme3100
-# $Revision-Id$
 # Author: W. Eric Norum <wenorum@lbl.gov>
 #
 # All RTEMS targets use the same Makefile fragment

configure/os/CONFIG.Common.RTEMS-mvme5500

@@ -1,6 +1,5 @@
 #
 # CONFIG.Common.RTEMS-mvme5500
-# $Revision-Id$
 # Author: W. Eric Norum <wenorum@lbl.gov>
 #
 # All RTEMS targets use the same Makefile fragment

configure/os/CONFIG.Common.RTEMS-pc386

@@ -1,5 +1,4 @@
 #
-# $Revision-Id$
 # Author: W. Eric Norum
 #         Canadian Light Source
 #         eric@cls.usask.ca

configure/os/CONFIG.Common.RTEMS-psim

@@ -1,5 +1,4 @@
 #
-# $Revision-Id$
 # Author: W. Eric Norum
 #         University of Saskatchewan
 #         eric.norum@usask.ca

configure/os/CONFIG.Common.RTEMS-uC5282

@@ -1,5 +1,4 @@
 #
-# $Revision-Id$
 # Author: W. Eric Norum
 #         Canadian Light Source
 #         eric@cls.usask.ca

configure/os/CONFIG.Common.UnixCommon

@@ -1,7 +1,5 @@
 # CONFIG.Common.UnixCommon
 #
-# $Revision-Id$
-#
 #  Contains definitions common to all Unix target archs
 #
 #  This file is maintained by the build community.
@@ -57,7 +55,7 @@ SHRLIB_LDLIBS = $(addprefix -l, $($*_LDLIBS) $(LIB_LIBS) $(USR_LIBS)) \
     $(LDLIBS)
 
 SHRLIB_DEPLIB_DIRS = $(foreach word, \
-    $(sort $(dir $($*_DEPLIBS) $(SHRLIB_DEPLIBS))), \
+    $(sort $(INSTALL_LIB)/ $(dir $($*_DEPLIBS) $(SHRLIB_DEPLIBS))), \
     $(shell $(FULLPATHNAME) $(word)))
 
 SHRLIBDIR_LDFLAGS += $(SHRLIB_DEPLIB_DIRS:%=-L%)
@@ -86,7 +84,7 @@ PROD_LDLIBS += $($(firstword $(LDLIBS_STATIC_$(STATIC_BUILD)) \
                $(LDLIBS_SHARED_$(SHARED_LIBRARIES))))
 
 PROD_DEPLIB_DIRS = $(foreach word, \
-    $(sort $(dir $($*_DEPLIBS) $(PROD_DEPLIBS))), \
+    $(sort $(INSTALL_LIB)/ $(dir $($*_DEPLIBS) $(PROD_DEPLIBS))), \
     $(shell $(FULLPATHNAME) $(word)))
 
 PRODDIR_LDFLAGS += $(PROD_DEPLIB_DIRS:%=-L%)

configure/os/CONFIG.Common.cygwin-x86

@@ -1,6 +1,5 @@
 # CONFIG.Common.cygwin-x86
 #
-# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for cygwin-x86 target builds

configure/os/CONFIG.Common.cygwin-x86_64

@@ -1,14 +1,13 @@
-# CONFIG.Common.cygwin-x86_64
-#
-# $Revision-Id$
-# This file is maintained by the build community.
-#
-# Definitions for cygwin-x86_64 target builds
-# Sites may override these definitions in CONFIG_SITE.Common.cygwin-x86_64
-#-------------------------------------------------------
-
-include $(CONFIG)/os/CONFIG.Common.cygwin-x86
-
-ARCH_DEP_CFLAGS = -m64
-ARCH_DEP_LDFLAGS = -m64
-
+# CONFIG.Common.cygwin-x86_64
+#
+# This file is maintained by the build community.
+#
+# Definitions for cygwin-x86_64 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.cygwin-x86_64
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.Common.cygwin-x86
+
+ARCH_DEP_CFLAGS = -m64
+ARCH_DEP_LDFLAGS = -m64
+

configure/os/CONFIG.Common.darwin-ppc

@@ -1,6 +1,5 @@
 # CONFIG.Common.darwin-ppc
 #
-# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for darwin-ppc target builds

configure/os/CONFIG.Common.darwin-ppcx86

@@ -1,6 +1,5 @@
 # CONFIG.Common.darwin-ppcx86
 #
-# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for Darwin universal PowerPC + x86 target builds

configure/os/CONFIG.Common.darwin-x86

@@ -1,6 +1,5 @@
 # CONFIG.Common.darwin-x86
 #
-# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for darwin-x86 target builds

configure/os/CONFIG.Common.freebsd-x86

@@ -1,4 +1,3 @@
-# $Revision-Id$
 #
 # This file is maintained by the build community.
 #

configure/os/CONFIG.Common.freebsd-x86_64

@@ -1,4 +1,3 @@
-# $Revision-Id$
 #
 # This file is maintained by the build community.
 #

configure/os/CONFIG.Common.freebsdCommon

@@ -1,4 +1,3 @@
-# $Revision-Id$
 #
 # This file is maintained by the build community.
 #

configure/os/CONFIG.Common.ios-arm

@@ -1,6 +1,5 @@
 # CONFIG.Common.ios-arm
 #
-# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for ios-arm target builds

configure/os/CONFIG.Common.ios-x86

@@ -1,6 +1,5 @@
 # CONFIG.Common.ios-x86
 #
-# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for ios-x86 target builds

configure/os/CONFIG.Common.iosCommon

@@ -1,6 +1,5 @@
 # CONFIG.Common.iosCommon
 #
-# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for all Apple iOS builds

configure/os/CONFIG.Common.linux-386

@@ -1,6 +1,5 @@
 # CONFIG.Common.linux-386
 #
-# $Revision-Id$
 # This file is maintained by the build community.
 #
 # Definitions for linux-386 target builds

configure/os/CONFIG.Common.linux-486

@@ -1,8 +1,5 @@
 # CONFIG.Common.linux-486
 #
-# $Id
-# This file is maintained by the build community.
-#
 # Definitions for linux-486 target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linux-486
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-586

@@ -1,8 +1,5 @@
 # CONFIG.Common.linux-586
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for linux-586 target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linux-586
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-686

@@ -1,8 +1,5 @@
 # CONFIG.Common.linux-686
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for linux-686 target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linux-686
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-arm-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.linux-arm-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for linux-arm with debug compiler flags
 # Override these settings in CONFIG_SITE.Common.linux-arm-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-arm_eb

@@ -1,7 +1,5 @@
 # CONFIG.Common.linux-arm_eb
 #
-# This file is maintained by the build community.
-#
 # Definitions for linux-arm_eb (big endian) target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linux-arm_eb
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-arm_el

@@ -1,7 +1,5 @@
 # CONFIG.Common.linux-arm_el
 #
-# This file is maintained by the build community.
-#
 # Definitions for linux-arm_el (little endian) target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linux-arm_el
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-athlon

@@ -1,8 +1,5 @@
 # CONFIG.Common.linux-athlon
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for linux-athlon target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linux-athlon
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-ppc

@@ -1,7 +1,5 @@
 # CONFIG.Common.linux-ppc
 #
-# This file is maintained by the build community.
-#
 # Definitions for linux-ppc target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linux-ppc
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-ppc64

@@ -1,8 +1,5 @@
 # CONFIG.Common.linux-ppc64
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for linux-ppc64 target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linux-ppc64
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-x86

@@ -1,8 +1,5 @@
 # CONFIG.Common.linux-x86
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for linux-x86 target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linux-x86
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-x86-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.linux-x86-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for linux-x86 with debug compiler flags
 # Sites may override these definitions in CONFIG_SITE.Common.linux-x86-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-x86_64

@@ -1,8 +1,5 @@
 # CONFIG.Common.linux-x86_64
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for linux-x86_64 target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linux-x86_64
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-x86_64-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.linux-x86_64-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for linux-x86_64 with debug compiler flags
 # Sites may override these definitions in CONFIG_SITE.Common.linux-x86_64-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.linux-xscale_be

@@ -1,7 +1,5 @@
 # CONFIG.Common.linux-xscale_be
 #
-# This file is maintained by the build community.
-#
 # Definitions for linux-xscale_be (big-endian) target builds.
 # This target has been tested with the MOXA UC-7408-LX Plus.
 

configure/os/CONFIG.Common.linuxCommon

@@ -1,8 +1,5 @@
 # CONFIG.Common.linuxCommon
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for linux target builds
 # Sites may override these definitions in CONFIG_SITE.Common.linuxCommon
 #-------------------------------------------------------

configure/os/CONFIG.Common.solaris-sparc

@@ -1,8 +1,5 @@
 # CONFIG.Common.solaris-sparc
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for solaris-sparc target archs
 # Sites may override these definitions in CONFIG_SITE.Common.solaris-sparc
 #-------------------------------------------------------

configure/os/CONFIG.Common.solaris-sparc-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.solaris-sparc-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for solaris-sparc with debug compiler flags
 # Sites may override these definitions in CONFIG_SITE.Common.solaris-sparc-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.solaris-sparc-gnu

@@ -1,8 +1,5 @@
 # CONFIG.Common.solaris-sparc-gnu
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for solaris-sparc gnu compiler target archs
 # Sites may override these definitions in CONFIG_SITE.Common.solaris-sparc-gnu
 #-------------------------------------------------------

configure/os/CONFIG.Common.solaris-sparc64

@@ -1,8 +1,5 @@
 # CONFIG.Common.solaris-sparc64
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for solaris-sparc64 compiler target archs
 # Sites may override these definitions in CONFIG_SITE.Common.solaris-sparc64
 #-------------------------------------------------------

configure/os/CONFIG.Common.solaris-sparc64-gnu

@@ -1,8 +1,5 @@
 # CONFIG.Common.solaris-sparc64-gnu
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for solaris-sparc64 gnu compiler target archs
 # Sites may override these definitions in CONFIG_SITE.Common.solaris-sparc64-gnu
 #-------------------------------------------------------

configure/os/CONFIG.Common.solaris-x86

@@ -1,8 +1,5 @@
 # CONFIG.Common.solaris-x86
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for solaris-x86 target archs
 # Sites may override these definitions in CONFIG_SITE.Common.solaris-x86
 #-------------------------------------------------------

configure/os/CONFIG.Common.solaris-x86-gnu

@@ -1,8 +1,5 @@
 # CONFIG.Common.solaris-x86-gnu
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for solaris-x86 gnu compiler target archs
 # Sites may override these definitions in CONFIG_SITE.Common.solaris-x86-gnu
 #-------------------------------------------------------

configure/os/CONFIG.Common.solaris-x86_64

@@ -1,8 +1,5 @@
 # CONFIG.Common.solaris-x86_64
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for solaris-x86_64 compiler target archs
 # Sites may override these definitions in CONFIG_SITE.Common.solaris-x86_64
 #-------------------------------------------------------

configure/os/CONFIG.Common.solaris-x86_64-gnu

@@ -1,8 +1,5 @@
 # CONFIG.Common.solaris-x86_64-gnu
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for solaris-x86_64 gnu compiler target archs
 # Sites may override these definitions in CONFIG_SITE.Common.solaris-x86_64-gnu
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-486

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-486
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-486 target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-486
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-486-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-486-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-486-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-486-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-68040

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-68040
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-68040 target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-68040
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-68040-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-68040-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-68040-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-68040-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-68040lc

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-68040lc
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-68040lc target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-68040lc
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-68040lc-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-68040lc-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-68040lc-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-68040lc-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-68060

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-68060
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-68060 target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-68060
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-68060-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-68060-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-68060-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-68060-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-mpc8540

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-mpc8540
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-mpc8540 target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-mpc8540
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-mpc8540-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-mpc8540-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-mpc8540-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-mpc8540-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-mpc8548

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-mpc8548
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-mpc8548 target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-mpc8548
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-mpc8548-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-mpc8548-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-mpc8548-debug targets.
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-mpc8548-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-pentium

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-pentium
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-pentium target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-pentium
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-pentium-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-pentium-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-pentium-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-pentium-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-ppc32

@@ -1,9 +1,7 @@
-# $Revision-Id$
 #
 # Definitions for vxWorks-ppc603 targets with >32MB of RAM
 # Site-specific overrides go in CONFIG_SITE.Common.vxWorks-ppc603_long
 #
-# This file is maintained by the EPICS build community.
 #-------------------------------------------------------
 
 # Include definitions common to all vxWorks target archs

configure/os/CONFIG.Common.vxWorks-ppc32-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-ppc32-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-ppc32-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-ppc32-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-ppc32sf

@@ -1,9 +1,7 @@
-# $Revision-Id$
 #
 # Definitions for vxWorks-ppc32sf targets
 # Site-specific overrides go in CONFIG_SITE.Common.vxWorks-ppc32sf
 #
-# This file is maintained by the EPICS build community.
 #-------------------------------------------------------
 
 # Inherit the settings from vxWorks-ppc32

configure/os/CONFIG.Common.vxWorks-ppc32sf-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-ppc32sf-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-ppc32sf-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-ppc32sf-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-ppc603

@@ -1,9 +1,7 @@
-# $Revision-Id$
 #
 # Definitions for vxWorks-ppc603 targets: PPC603 and PMC8240 CPUs
 # Site-specific overrides go in CONFIG_SITE.Common.vxWorks-ppc603
 #
-# This file is maintained by the EPICS build community.
 #-------------------------------------------------------
 
 # Include definitions common to all vxWorks target archs

configure/os/CONFIG.Common.vxWorks-ppc603-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-ppc603-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-ppc603-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-ppc603-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-ppc603_long

@@ -1,9 +1,7 @@
-# $Revision-Id$
 #
 # Definitions for vxWorks-ppc603 targets with >32MB of RAM
 # Site-specific overrides go in CONFIG_SITE.Common.vxWorks-ppc603_long
 #
-# This file is maintained by the EPICS build community.
 #-------------------------------------------------------
 
 # Inherit the settings from vxWorks-ppc603

configure/os/CONFIG.Common.vxWorks-ppc603_long-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-ppc603_long-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-ppc603_long-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-ppc603_long-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-ppc604

@@ -1,9 +1,7 @@
-# $Revision-Id$
 #
 # Definitions for vxWorks-ppc604 targets: PPC604, MPC7xx and MPC74xx CPUs
 # Site-specific overrides go in CONFIG_SITE.Common.vxWorks-ppc604
 #
-# This file is maintained by the EPICS build community.
 #-------------------------------------------------------
 
 # Include definitions common to all vxWorks target archs

configure/os/CONFIG.Common.vxWorks-ppc604-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-ppc604-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-ppc604-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-ppc604-debug
 #-------------------------------------------------------

configure/os/CONFIG.Common.vxWorks-ppc604_altivec

@@ -1,9 +1,7 @@
-# $Revision-Id$
 #
 # Definitions for vxWorks-ppc604 targets with an Altivec and >32MB of RAM.
 # Site-specific overrides go in CONFIG_SITE.Common.vxWorks-ppc604_altivec
 #
-# This file is maintained by the EPICS build community.
 #-------------------------------------------------------
 
 # Inherit the settings from vxWorks-ppc604_long

configure/os/CONFIG.Common.vxWorks-ppc604_altivec-debug

@@ -1,8 +1,5 @@
 # CONFIG.Common.vxWorks-ppc604_altivec-debug
 #
-# $Revision-Id$
-# This file is maintained by the build community.
-#
 # Definitions for vxWorks-ppc604_altivec-debug target archs
 # Sites may override these definitions in CONFIG_SITE.Common.vxWorks-ppc604_altivec-debug
 #-------------------------------------------------------