Set version to 3.14.12.5-pre1

The following variables are reserved for use from the
GNUmake command line:
  CMD_INCLUDES
  CMD_CPPFLAGS
  CMD_CFLAGS
  CMD_CXXFLAGS
  CMD_LDFLAGS
  CMD_DBFLAGS
  CMD_DBDFLAGS
  CMD_ARFLAGS

For example:
  make CMD_INCLUDES=/opt/local/include CMD_LDFLAGS=-L/opt/local/lib

.bzrignore

@@ -6,3 +6,4 @@
 ./include
 ./templates
 **/O.*
+./QtC-*

configure/CONFIG

@@ -1,17 +1,13 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2013 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
 #
 #  $Revision-Id$
-#
-#  The developer may edit this file.
-# assume T_A is the host arch if not specified
 
 #
 #  Common build definitions
@@ -89,8 +85,6 @@ endif
 -include $(CONFIG)/os/CONFIG_SITE.Common.$(T_A)
 -include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
 
-endif
-
 # Include <top>/cfg/CONFIG* definitions from tops defined in RELEASE* files
 #
 ifneq ($(CONFIG),$(TOP)/configure)
@@ -103,12 +97,12 @@ endif
 
 # Include $(INSTALL_CFG)/CONFIG* definitions
 #
-ifndef T_A
 TOP_CFG_CONFIGS = $(wildcard $(INSTALL_CFG)/CONFIG*)
 ifneq ($(TOP_CFG_CONFIGS),)
 include $(TOP_CFG_CONFIGS)
 endif
-endif
+
+endif # ifdef T_A
 
 #  User specific definitions
 #
@@ -119,22 +113,3 @@ ifdef T_A
 -include $(HOME)/configure/CONFIG_USER.$(EPICS_HOST_ARCH).$(T_A)
 endif
 
-#  All options
-#   may be overridden here.
-#
-# EXAMPLES
-# --------
-#  Build client objects statically ?  must be either YES or NO
-#STATIC_BUILD=NO
-#  Host build optimization,   must be either YES or NO
-#HOST_OPT=YES
-#  Cross build optimization,  must be either YES or NO
-#CROSS_OPT=YES
-#  Generate Verbose Compiler Warnings for host build,  must be either YES or NO
-#HOST_WARN=YES
-#  Generate Verbose Compiler Warnings for cross compile builds,  must be either YES or NO
-#CROSS_WARN=YES
-#etc.
-
-#CROSS_COMPILER_TARGET_ARCHS=vxWorks-68040
-

configure/CONFIG_ADDONS

@@ -376,17 +376,6 @@ USR_LIBS += $(USR_LIBS_DEFAULT)
 endif
 endif
 
-#
-#	concat specific include files
-#
-ifneq ($(strip $(INC_$(OS_CLASS))),)
-INC += $(subst -nil-,,$(INC_$(OS_CLASS)))
-else
-ifdef INC_DEFAULT
-INC+=$(INC_DEFAULT)
-endif
-endif
-
 #
 #	concat specific library contents (if defined) to SYS_PROD_LIBS
 #

configure/CONFIG_BASE

@@ -63,7 +63,8 @@ DBEXPAND                   = $(call PATH_FILTER, $(TOOLS)/dbExpand$(HOSTEXE))
 DBTORECORDTYPEH            = $(call PATH_FILTER, $(TOOLS)/dbToRecordtypeH$(HOSTEXE))
 DBTOMENUH                  = $(call PATH_FILTER, $(TOOLS)/dbToMenuH$(HOSTEXE))
 REGISTERRECORDDEVICEDRIVER = $(PERL) $(TOOLS)/registerRecordDeviceDriver.pl
-CONVERTRELEASE=$(PERL) $(TOOLS)/convertRelease.pl
+CONVERTRELEASE             = $(PERL) $(TOOLS)/convertRelease.pl
+FULLPATHNAME               = $(PERL) $(TOOLS)/fullPathName.pl
 
 #-------------------------------------------------------
 # tools for installing libraries and products

configure/CONFIG_BASE_VERSION

@@ -30,11 +30,11 @@ EPICS_MODIFICATION = 12
 
 # EPICS_PATCH_LEVEL must be a number  (win32 resource file requirement)
 # Not included if zero
-EPICS_PATCH_LEVEL = 3
+EPICS_PATCH_LEVEL = 5
 
 # This will end in -DEV between official releases
 #EPICS_DEV_SNAPSHOT=-DEV
-#EPICS_DEV_SNAPSHOT=-pre1
+EPICS_DEV_SNAPSHOT=-pre1
 #EPICS_DEV_SNAPSHOT=-pre1-DEV
 #EPICS_DEV_SNAPSHOT=-pre2
 #EPICS_DEV_SNAPSHOT=-pre2-DEV
@@ -42,7 +42,7 @@ EPICS_PATCH_LEVEL = 3
 #EPICS_DEV_SNAPSHOT=-rc1-DEV
 #EPICS_DEV_SNAPSHOT=-rc2
 #EPICS_DEV_SNAPSHOT=-rc2-DEV
-EPICS_DEV_SNAPSHOT=
+#EPICS_DEV_SNAPSHOT=
 
 # No changes should be needed below here
 

configure/CONFIG_COMMON

@@ -76,9 +76,12 @@ INSTALL_DB                  = $(INSTALL_LOCATION)/db
 INSTALL_CONFIG              = $(INSTALL_LOCATION)/configure
 INSTALL_JAVA                = $(INSTALL_LOCATION)/javalib
 
-#Directory for OS independant build created files
+# Directory for OS independant build created files
 COMMON_DIR = ../O.Common
 
+# IOC's absolute path to $(TOP), may be overridden inside the application
+IOCS_APPL_TOP               = $(shell $(FULLPATHNAME) $(INSTALL_LOCATION))
+
 #-------------------------------------------------------
 # Make echo output - suppress echoing if make's '-s' flag is set
 NOP = :
@@ -206,6 +209,16 @@ USR_CPPFLAGS =
 USR_DBDFLAGS =
 USR_ARFLAGS =
 
+# Variables to be set only on the command-line:
+# CMD_INCLUDES =
+# CMD_CFLAGS =
+# CMD_CXXFLAGS =
+# CMD_LDFLAGS =
+# CMD_CPPFLAGS =
+# CMD_DBFLAGS =
+# CMD_DBDFLAGS =
+# CMD_ARFLAGS =
+
 # Debug specific options
 DEBUG_CPPFLAGS =
 DEBUG_CFLAGS =
@@ -264,32 +277,35 @@ RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(COMMANDLINE_LIBRARY))
 # Flags
 
 INCLUDES = -I. $(SRC_INCLUDES) $(INSTALL_INCLUDES) $(RELEASE_INCLUDES)\
- $(TARGET_INCLUDES) $(USR_INCLUDES) $(OP_SYS_INCLUDES) $($(BUILD_CLASS)_INCLUDES)
+ $(TARGET_INCLUDES) $(USR_INCLUDES) $(CMD_INCLUDES) $(OP_SYS_INCLUDES)\
+ $($(BUILD_CLASS)_INCLUDES)
 
-CFLAGS = $($(BUILD_CLASS)_CFLAGS) $(POSIX_CFLAGS) $(OPT_CFLAGS) $(DEBUG_CFLAGS)\
- $(PIPE_CFLAGS) $(WARN_CFLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS)\
- $(CODE_CFLAGS) $(STATIC_CFLAGS) $(OP_SYS_CFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
+CFLAGS = $($(BUILD_CLASS)_CFLAGS) $(POSIX_CFLAGS) $(OPT_CFLAGS)\
+ $(DEBUG_CFLAGS) $(PIPE_CFLAGS) $(WARN_CFLAGS) $(TARGET_CFLAGS)\
+ $(USR_CFLAGS) $(CMD_CFLAGS) $(ARCH_DEP_CFLAGS) $(CODE_CFLAGS)\
+ $(STATIC_CFLAGS) $(OP_SYS_CFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
 
-CXXFLAGS = $($(BUILD_CLASS)_CXXFLAGS) $(POSIX_CXXFLAGS) $(OPT_CXXFLAGS) $(DEBUG_CXXFLAGS)\
- $(PIPE_CFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS)\
- $(CODE_CXXFLAGS) $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
+CXXFLAGS = $($(BUILD_CLASS)_CXXFLAGS) $(POSIX_CXXFLAGS) $(OPT_CXXFLAGS)\
+ $(DEBUG_CXXFLAGS) $(PIPE_CFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS)\
+ $(USR_CXXFLAGS) $(CMD_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(CODE_CXXFLAGS)\
+ $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
 
-LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(POSIX_LDFLAGS) \
- $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(OP_SYS_LDFLAGS) $($(BUILD_CLASS)_LDFLAGS)\
- $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
+LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(CMD_LDFLAGS)\
+ $(POSIX_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(OP_SYS_LDFLAGS)\
+ $($(BUILD_CLASS)_LDFLAGS) $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
 
-LDLIBS = \
- $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS) $(GNU_LDLIBS_$(GNU))
+LDLIBS = $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS)\
+ $(GNU_LDLIBS_$(GNU))
 
-CPPFLAGS += $($(BUILD_CLASS)_CPPFLAGS) $(POSIX_CPPFLAGS)\
- $(OPT_CPPFLAGS) $(DEBUG_CPPFLAGS) $(WARN_CPPFLAGS)\
- $(BASE_CPPFLAGS) $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS)\
- $(OP_SYS_CPPFLAGS) $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
+CPPFLAGS = $($(BUILD_CLASS)_CPPFLAGS) $(POSIX_CPPFLAGS) $(OPT_CPPFLAGS)\
+ $(DEBUG_CPPFLAGS) $(WARN_CPPFLAGS) $(BASE_CPPFLAGS) $(TARGET_CPPFLAGS)\
+ $(USR_CPPFLAGS) $(CMD_CPPFLAGS) $(ARCH_DEP_CPPFLAGS) $(OP_SYS_CPPFLAGS)\
+ $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
 
 #--------------------------------------------------
 # ar definition default
 ARFLAGS =
-ARCMD = $(AR) $(ARFLAGS) $(USR_ARFLAGS) $@  $(LIBRARY_LD_OBJS)
+ARCMD = $(AR) $(ARFLAGS) $(USR_ARFLAGS) $(CMD_ARFLAGS) $@  $(LIBRARY_LD_OBJS)
 
 #--------------------------------------------------
 # 'Munch' link-edit
@@ -320,8 +336,7 @@ PREPROCESS.cpp = $(CPP) $(CPPFLAGS) $(INCLUDES) $< > $@
 HDEPENDS = YES
 HDEPENDS_METHOD = CMD
 
-HDEPENDS_INCLUDES = $(subst -I,,$(INCLUDES))
-HDEPENDSFLAGS = -m $*$(DEP) $(HDEPENDS_INCLUDES) $@ $<
+HDEPENDSFLAGS = -m $*$(DEP) $(INCLUDES) $@ $<
 HDEPENDSCMD = -$(MKMF) $(HDEPENDS_FLAGS) $(HDEPENDSFLAGS)
 
 HDEPENDS_CMD_NO = $(ECHO) ""

configure/CONFIG_FILE_TYPE

@@ -1,10 +1,10 @@
 #*************************************************************************
-# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2013 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution. 
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
 # $Revision-Id$
 #
@@ -12,7 +12,7 @@
 #
 
 # --------------------------------------------------------------
-# Module developers can now define a new type of file, e.g. ABC, 
+# Module developers can now define a new type of file, e.g. ABC,
 # so that files of type ABC will be installed into a directory
 # defined by INSTALL_ABC. This is done by creating a new CONFIG<name>
 # file, e.g. CONFIG_ABC, with the following lines:
@@ -24,8 +24,14 @@
 # $(INSTALL_LOCATION). The file type ABC should be target
 # architecture independent (alh files, medm files, edm files).
 #
-# Optional rules necessary for files of type ABC should be put in
-# a RULES_ABC file.
+# Files of type ABC are then installed into the INSTALL_ABC
+# directory by adding a line like the following to a Makefile.
+#
+#       ABC += <filename1> <filename2> <filename3>
+#
+# Rules necessary to create files of type ABC should be put in
+# a RULES_ABC file. Variables used by those rules should appear
+# in a CONFIG_ABC file.
 #
 # The module developer installs new CONFIG* or RULES* files
 # into the directory $(INSTALL_LOCATION)/cfg by including the 
@@ -33,16 +39,11 @@
 #
 #       CFG += CONFIG_ABC RULES_ABC
 # 
-# Files of type ABC are installed into INSTALL_ABC directory
-# by adding a line like the following to a Makefile.
-#
-#       ABC += <filename1> <filename2> <filename3>
-#
-# Files in $(INSTALL_LOCATION)/cfg directory are now included by
-# the base config files so the definitions and rules are available
-# for use by later src directory Makefiles in the same module or
-# by other modules with a RELEASE line pointing to the TOP of 
-# the module with RULES_ABC.
+# CONFIG and RULES files in the $(INSTALL_LOCATION)/cfg directory
+# are included by the Base config files so their definitions and
+# rules are available for use by later src directory Makefiles in
+# the same module, or by other modules with a RELEASE line that
+# points to the TOP of the module providing these files.
 
 FILE_TYPE += ADL
 INSTALL_ADL = $(INSTALL_LOCATION)/adl
@@ -59,6 +60,6 @@ INSTALL_EDL = $(INSTALL_LOCATION)/edl
 FILE_TYPE += PERL_MODULES
 INSTALL_PERL_MODULES = $(INSTALL_LOCATION_LIB)/perl
 
-INSTALLS_CFG= $(CFG:%= $(INSTALL_CFG)/%)
+INSTALLS_CFG = $(CFG:%= $(INSTALL_CFG)/%)
 DIRECTORY_TARGETS += $(foreach type, $(FILE_TYPE),$(INSTALL_$(type)))
 

configure/CONFIG_SITE

@@ -19,6 +19,7 @@
 #	aix-ppc                (IBM compiler used for host builds)
 #	aix-ppc-gnu            (GNU compiler used for host builds)
 #	cygwin-x86             (cygwin compiler used for host builds)
+#	cygwin-x86_64          (cygwin compiler used for host builds)
 #	darwin-ppc             (PowerPC based Apple running OSX)
 #	darwin-ppcx86          (Universal binaries for both CPUs)
 #	darwin-x86             (Intel based Apple running OSX)
@@ -41,6 +42,7 @@
 #	win32-x86-cygwin       (WIN32 API with cygwin GNU compiler used for host builds)
 #	win32-x86-mingw        (MinGW compiler used for host builds)
 #	windows-x64            (MS Visual C++ compiler used for host builds)
+#	windows-x64-mingw      (MinGW compiler used for host builds)
 
 #  Debugging builds 
 #	linux-x86-debug        (GNU compiler with -g option for host builds)
@@ -174,7 +176,7 @@ COMPAT_313=NO
 #INSTALL_LOCATION=<fullpathname>
 
 # Use POSIX thread priority scheduling (YES or NO)
-USE_POSIX_THREAD_PRIORITY_SCHEDULING = NO
+USE_POSIX_THREAD_PRIORITY_SCHEDULING = YES
 
 #  Site version number, if set will append '-' and this string to the
 #  EPICS version number string that is reported by many tools

configure/RULES.Db

@@ -24,8 +24,8 @@ vpath %.acs $(USR_VPATH) $(GENERIC_SRC_DIRS) $(COMMON_DIR)
 DBD_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DBD) $(RELEASE_DBD_DIRS)
 DB_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DB) $(RELEASE_DB_DIRS)
 
-DBDFLAGS = $(USR_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
-DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
+DBDFLAGS = $(USR_DBDFLAGS) $(CMD_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
+DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(CMD_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
 
 #####################################################
 # To allow os specific dbd files AND have the -j option work properly,
@@ -119,6 +119,9 @@ DBDDEPENDS_CMD = -$(MKMF) -m $(notdir $@)$(DEP) $(DBDDEPENDS_FLAGS) $@ $<
 
 ifndef T_A
 
+DEP = .d
+TEMPLATE3+=$(addsuffix .template, $(TEMPLATE2))
+
 COMMON_DIR = .
 INSTALL_DBDS =
 INSTALL_DBS =
@@ -131,7 +134,7 @@ ACTIONS += build
 ACTIONS += install
 ACTIONS += buildInstall
 ACTIONS += browse
-ACTIONS += runtests
+ACTIONS += runtests tapfiles
 
 actionArchTargets = $(foreach x, $(ACTIONS),\ $(foreach arch,$(BUILD_ARCHS), $(x)$(DIVIDER)$(arch)))
 
@@ -368,17 +371,14 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 
 ##################################################### register record,device,driver support
 
-IOC_INST_TOP := $(firstword $(IOCS_APPL_TOP) \
-        $(shell $(PERL) $(TOOLS)/fullPathName.pl $(INSTALL_LOCATION) ) )
-
 %_registerRecordDeviceDriver.cpp: $(COMMON_DIR)/%.dbd 
 	@$(RM) $@ $*.tmp
-	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOC_INST_TOP) > $*.tmp
+	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOCS_APPL_TOP) > $*.tmp
 	$(MV) $*.tmp $@
 
 %_registerRecordDeviceDriver.cpp: %.dbd 
 	@$(RM) $@ $*.tmp
-	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOC_INST_TOP) > $*.tmp
+	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOCS_APPL_TOP) > $*.tmp
 	$(MV) $*.tmp $@
 
 .PRECIOUS: %_registerRecordDeviceDriver.cpp

configure/RULES.ioc

@@ -1,13 +1,13 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2013 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
 #RULES.ioc
+
 include $(CONFIG)/RULES_DIRS
 
 build$(DIVIDER)$(ARCH) build: buildInstall
@@ -15,24 +15,20 @@ install$(DIVIDER)$(ARCH) install: buildInstall
 $(ARCH): buildInstall
 
 ifeq ($(filter $(ARCH),$(BUILD_ARCHS)),$(ARCH))
-buildInstall$(DIVIDER)$(ARCH) buildInstall: $(TARGETS)
+    buildInstall$(DIVIDER)$(ARCH) buildInstall: $(TARGETS)
 
-clean$(DIVIDER)$(ARCH) clean:
-	$(RM) cdCommands envPaths dllPath.bat
-
-else 
-buildInstall$(DIVIDER)$(ARCH) buildInstall:
-clean$(DIVIDER)$(ARCH) clean:
-endif
-
-cdCommands envPaths dllPath.bat: $(wildcard $(TOP)/configure/RELEASE*) \
-	$(TOP)/configure/CONFIG $(INSTALL_BIN)
-ifeq ($(IOCS_APPL_TOP),)
-	$(PERL) $(TOOLS)/convertRelease.pl -a $(ARCH) $@
+    clean$(DIVIDER)$(ARCH) clean:
+	$(RM) cdCommands envPaths dllPath.bat relPaths.sh
 else
-	$(PERL) $(TOOLS)/convertRelease.pl -a $(ARCH) -t $(IOCS_APPL_TOP) $@
+    buildInstall$(DIVIDER)$(ARCH) buildInstall:
+    clean$(DIVIDER)$(ARCH) clean:
 endif
 
+cdCommands envPaths dllPath.bat relPaths.sh: \
+    $(wildcard $(TOP)/configure/RELEASE*) \
+    $(wildcard $(TOP)/configure/CONFIG_SITE*) $(INSTALL_BIN)
+	$(CONVERTRELEASE) -a $(ARCH) -t $(IOCS_APPL_TOP) $@
+
 realclean:
-	$(RM) cdCommands envPaths dllPath.bat
+	$(RM) cdCommands envPaths dllPath.bat relPaths.sh
 

configure/RULES_ARCHS

@@ -17,7 +17,7 @@ ACTIONS += build
 ACTIONS += install
 ACTIONS += buildInstall
 ACTIONS += browse
-ACTIONS += runtests
+ACTIONS += runtests tapfiles
 #ACTIONS += rebuild
 
 actionPart = $(word 1, $(subst $(DIVIDER), ,$@))

configure/RULES_BUILD

@@ -96,6 +96,8 @@ ifneq (,$(strip $(TESTS)))
 TARGETS += testspec
 endif
 
+TAPFILES += $(TESTSCRIPTS:.t=.tap)
+
 #---------------------------------------------------------------
 #   Libraries 
 #
@@ -142,7 +144,8 @@ clean::
 	@$(RM) *.i *$(OBJ) *.a $(TESTPRODNAME) $(LIBNAME) $(SHRLIBNAME) \
 	$(INC) $(TARGETS) $(DLL_LINK_LIBNAME) $(TDS) \
 	*.out MakefileInclude  $(LOADABLE_SHRLIBNAME) *.manifest *.exp \
-	$(COMMON_INC) $(HDEPENDS_FILES) $(PRODTARGETS) $(TESTSCRIPTS)
+	$(COMMON_INC) $(HDEPENDS_FILES) $(PRODTARGETS) \
+	$(TESTSCRIPTS) $(TAPFILES)
 ifdef RES
 	@$(RM) *$(RES)
 endif
@@ -195,17 +198,23 @@ $(OBJLIBNAME):%$(OBJ):
 	@$(RM) $@
 	$(COMPILE.ctdt) $<
 
-%$(OBJ): %.c
+# Cancel GNUMake's built-in rules, which don't have our _INC
+# dependencies so could get used in some circumstances (gdd)
+%.o : %.c
+%.o : %.cc
+%.o : %.cpp
+
+%$(OBJ): %.c $(COMMON_INC) $(INSTALL_INC)
 	@$(HDEPENDS_CMD)
 	@$(RM) $@
 	$(COMPILE.c) $(call PATH_FILTER,$<) $(COMPILE_FILTER.c)
 
-%$(OBJ): %.cc
+%$(OBJ): %.cc $(COMMON_INC) $(INSTALL_INC)
 	@$(HDEPENDS_CMD)
 	@$(RM) $@
 	$(COMPILE.cpp) $(call PATH_FILTER,$<) $(COMPILE_FILTER.cpp)
 
-%$(OBJ): %.cpp
+%$(OBJ): %.cpp $(COMMON_INC) $(INSTALL_INC)
 	@$(HDEPENDS_CMD)
 	@$(RM) $@
 	$(COMPILE.cpp) $(call PATH_FILTER,$<) $(COMPILE_FILTER.cpp)
@@ -322,6 +331,12 @@ $(OBJLIB_MUNCHNAME):%.munch : %_ctdt$(OBJ) %$(OBJ)
 	@$(RM) $@
 	$(MUNCH_CMD)
 
+# GeSys modules for RTEMS
+$(MODNAME): %$(MODEXT): %$(EXE)
+	@echo "Building module $@"
+	@$(RM) $@
+	$(LINK.mod)
+
 runtests: $(TESTSCRIPTS)
 	-$(PERL) -MTest::Harness -e 'runtests @ARGV if @ARGV;' $^
 
@@ -332,16 +347,22 @@ testspec: $(TESTSCRIPTS)
 	$(if $^, @echo Tests: $^ >> $@)
 	$(if $(TESTSPEC_$(OS_CLASS)), @echo "Harness: $(TESTSPEC_$(OS_CLASS))" >> $@)
 
+tapfiles: $(TESTSCRIPTS) $(TAPFILES)
+
+# A .tap file is the output from running the associated test script
+%.tap: %.t
+	-$(PERL) $< -tap > $@
+
 # If there's a perl test script (.plt) available, use it
 %.t: ../%.plt
 	@$(RM) $@
-	@$(CP) $< $@
+	$(CP) $< $@
 
-# Some versions of Test::Harness expect test programs in perl only.
+# Test programs (.t files) must be written in Perl.
 # Generate a perl program to exec the real test binary.
-%.t: %$(EXE)
+%.t: %$(EXE) $(TOOLS)/makeTestfile.pl
 	@$(RM) $@
-	@$(PERL) $(TOOLS)/makeTestfile.pl $@ $<
+	$(PERL) $(TOOLS)/makeTestfile.pl $@ $<
 
 #---------------------------------------------------------------
 ## Install rules for BIN_INSTALLS and LIB_INSTALLS

configure/RULES_DIRS

@@ -12,7 +12,8 @@
 
 
 ARCHS += $(BUILD_ARCHS)
-ACTIONS += inc build install buildInstall clean realclean archclean runtests
+ACTIONS += inc build install buildInstall clean realclean archclean
+ACTIONS += runtests tapfiles
 
 dirPart = $(join $(dir $@), $(word 1, $(subst $(DIVIDER), ,$(notdir $@))))
 

configure/RULES_FILE_TYPE

@@ -1,10 +1,10 @@
 #*************************************************************************
-# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2013 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution. 
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
 # $Revision-Id$
 #
@@ -36,13 +36,11 @@ endif
 endif
 
 #---------------------------------------------
-# Include existing and new $(INSTALL_CFG)/* definitions
+# Include our own $(INSTALL_CFG)/RULES* definitions
 #
-TOP_CFG_FILES = $(sort $(wildcard $(INSTALL_CFG)/RULES*) \
-                       $(wildcard $(INSTALL_CFG)/CONFIG*) \
-                       $(addprefix $(INSTALL_CFG)/,$(CFG)))
-ifneq ($(TOP_CFG_FILES),)
-  include $(TOP_CFG_FILES)
+TOP_CFG_RULES = $(wildcard $(INSTALL_CFG)/RULES*)
+ifneq ($(TOP_CFG_RULES),)
+  include $(TOP_CFG_RULES)
 endif
 
 #---------------------------------------------------------------

configure/RULES_TOP

@@ -64,11 +64,11 @@ help:
 	@echo "     rebuild        - Same as clean install"
 	@echo "     archclean      - Removes O.<arch> dirs but not O.Common dir"
 	@echo "\"Partial\" build targets supported by Makefiles:"
-	@echo "     inc.<arch>     - Installs <arch> only header files."
-	@echo "     build.<arch>   - Builds and installs <arch> only."
-	@echo "     install.<arch> - Builds and installs <arch> only."
-	@echo "     clean.<arch>   - Cleans <arch> binaries in O.<arch> dirs only."
-	@echo "     uninstall.<arch> - Remove bin & lib directories for <arch> only."
+	@echo "     inc$(DIVIDER)<arch>     - Installs <arch> only header files."
+	@echo "     build$(DIVIDER)<arch>   - Builds and installs <arch> only."
+	@echo "     install$(DIVIDER)<arch> - Builds and installs <arch> only."
+	@echo "     clean$(DIVIDER)<arch>   - Cleans <arch> binaries in O.<arch> dirs only."
+	@echo "     uninstall$(DIVIDER)<arch> - Remove bin & lib directories for <arch> only."
 	@echo "Targets supported by top level Makefile:"
 	@echo "     archuninstall  - Remove bin & lib directories created by this hostarch."
 	@echo "     uninstall      - Remove install directories created by this hostarch."

configure/os/CONFIG.Common.RTEMS

@@ -49,28 +49,29 @@ RANLIB := $(RTEMS_TOOLS)/bin/$(RANLIB)
 VALID_BUILDS = Ioc
 
 #--------------------------------------------------
-# The RTEMS Makefiles redefine several macros, so we have to go
-# through the following contortions to get the EPICS flags back.
-CFLAGS = $(CROSS_CFLAGS) $(OPT_CFLAGS) $(DEBUG_CFLAGS)\
- $(WARN_CFLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS)\
- $(CODE_CFLAGS) $(STATIC_CFLAGS)  $(OP_SYS_CFLAGS) $(LIBRARY_SRC_CFLAGS)\
- $(HDEPENDS_CFLAGS)
+# The RTEMS Makefiles redefine several macros, so we have to
+# reset them to the proper EPICS values, from CONFIG_COMMON
+CFLAGS = $($(BUILD_CLASS)_CFLAGS) $(POSIX_CFLAGS) $(OPT_CFLAGS)\
+ $(DEBUG_CFLAGS) $(PIPE_CFLAGS) $(WARN_CFLAGS) $(TARGET_CFLAGS)\
+ $(USR_CFLAGS) $(CMD_CFLAGS) $(ARCH_DEP_CFLAGS) $(CODE_CFLAGS)\
+ $(STATIC_CFLAGS) $(OP_SYS_CFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
 
-CXXFLAGS = $(CROSS_CXXFLAGS) $(OPT_CXXFLAGS)\
- $(DEBUG_CXXFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS)\
- $(ARCH_DEP_CXXFLAGS) $(CODE_CXXFLAGS) $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS)\
- $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
+CXXFLAGS = $($(BUILD_CLASS)_CXXFLAGS) $(POSIX_CXXFLAGS) $(OPT_CXXFLAGS)\
+ $(DEBUG_CXXFLAGS) $(PIPE_CFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS)\
+ $(USR_CXXFLAGS) $(CMD_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(CODE_CXXFLAGS)\
+ $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
 
-LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) \
- $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(OP_SYS_LDFLAGS) $(CROSS_LDFLAGS)\
- $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
+LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(CMD_LDFLAGS)\
+ $(POSIX_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(OP_SYS_LDFLAGS)\
+ $($(BUILD_CLASS)_LDFLAGS) $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
 
-LDLIBS = \
- $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS)
+LDLIBS = $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS)\
+ $(GNU_LDLIBS_$(GNU))
 
-CPPFLAGS += $(CROSS_CPPFLAGS) $(POSIX_CPPFLAGS)\
-$(BASE_CPPFLAGS) $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS)\
- $(OP_SYS_CPPFLAGS) $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
+CPPFLAGS += $($(BUILD_CLASS)_CPPFLAGS) $(POSIX_CPPFLAGS) $(OPT_CPPFLAGS)\
+ $(DEBUG_CPPFLAGS) $(WARN_CPPFLAGS) $(BASE_CPPFLAGS) $(TARGET_CPPFLAGS)\
+ $(USR_CPPFLAGS) $(CMD_CPPFLAGS) $(ARCH_DEP_CPPFLAGS) $(OP_SYS_CPPFLAGS)\
+ $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
 
 #--------------------------------------------------
 # Although RTEMS uses gcc, it wants to use gcc its own way
@@ -82,6 +83,8 @@ OPT_CXXFLAGS_YES = $(CFLAGS_OPTIMIZE_V)
 OPT_CFLAGS_NO    = $(CFLAGS_DEBUG_V)
 OPT_CXXFLAGS_NO  = $(CFLAGS_DEBUG_V)
 
+MODEXT=.obj
+
 #--------------------------------------------------
 # operating system class (include/os/<os_class>)
 OS_CLASS = RTEMS
@@ -96,6 +99,42 @@ OP_SYS_LDFLAGS += $(CPU_CFLAGS) -u Init \
                  $(PROJECT_RELEASE)/lib/no-signal.rel \
                  $(PROJECT_RELEASE)/lib/no-rtmon.rel
 
+MOD_SYS_LDFLAGS += $(CPU_CFLAGS) -Wl,-r -nostdlib
+
+# Do not link against libraries which are part of the Generic Image
+GESYS_LIBS += -lgcc
+GESYS_LIBS += -lc -lm -lrtemscpu -lrtemsbsp -lrtems++ -lbspExt
+GESYS_LIBS += -lcexp -ltecla_r -lspencer_regexp -lpmelf -lpmbfd
+GESYS_LIBS += -lnfs -ltelnetd -lrtems-gdb-stub
+
+# While not part of the Generic Image it provides symbols which
+# would conflict.
+GESYS_LIBS += -lrtemsCom
+
+#--------------------------------------------------
+# Options for building GeSys loadable objects
+
+MODNAME_YES = $(PRODNAME:%$(EXE)=%$(MODEXT))
+MODNAME += $(MODNAME_$(USE_GESYS))
+PRODTARGETS += $(MODNAME)
+BIN_INSTALLS += $(MODNAME)
+
+# changes to LDFLAGS in CONFIG_COMMON and LINK.cpp in CONFIG.Common.UnixCommon
+# should be reflected here with the following exceptions
+#
+# replace OP_SYS_LDFLAGS with MOD_SYS_LDFLAGS
+# replace PROD_LDLIBS with MOD_LDLIBS
+# remove STATIC_LDFLAGS
+
+MOD_LDLIBS = $(filter-out $(GESYS_LIBS),$(PROD_LDLIBS))
+
+MOD_LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(POSIX_LDFLAGS) \
+ $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(MOD_SYS_LDFLAGS) $($(BUILD_CLASS)_LDFLAGS)\
+ $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
+
+LINK.mod = $(CCC) -o $@ $(PRODDIR_LDFLAGS) $(MOD_LDFLAGS)
+LINK.mod += $(PROD_LDFLAGS) $(PROD_LD_OBJS) $(PROD_LD_RESS) $(MOD_LDLIBS)
+
 #--------------------------------------------------
 # RTEMS has neither shared libraries nor dynamic loading
 STATIC_BUILD=YES

configure/os/CONFIG.Common.RTEMS-mvme5500

@@ -22,4 +22,6 @@ define MUNCH_CMD
 	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary $< $@
 endef
 
+OP_SYS_LDLIBS += -lbspExt
+
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-pc386

@@ -12,7 +12,7 @@ MUNCH_SUFFIX = .boot
 MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
 define MUNCH_CMD
 	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< temp.bin
-	$(PROJECT_RELEASE)/build-tools/bin2boot $@ 0x00097E00 \
+	$(BIN2BOOT) $@ 0x00097E00 \
 		$(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 temp.bin 0x00100000 0
 	rm -f temp.bin
 endef

configure/os/CONFIG.Common.UnixCommon

@@ -50,7 +50,7 @@ SHRLIB_LDLIBS = $(addprefix -l, $($*_LDLIBS) $(LIB_LIBS) $(USR_LIBS))\
  $(LDLIBS)
 
 SHRLIB_DEPLIB_DIRS = $(foreach word,$(sort $(dir $($*_DEPLIBS) $(SHRLIB_DEPLIBS))), \
-   $(shell $(PERL) $(TOOLS)/fullPathName.pl $(word)))
+   $(shell $(FULLPATHNAME) $(word)))
 
 SHRLIBDIR_LDFLAGS += $(SHRLIB_DEPLIB_DIRS:%=-L%)
 
@@ -73,7 +73,7 @@ PROD_LDLIBS += $($(firstword $(LDLIBS_STATIC_$(STATIC_BUILD)) \
                $(LDLIBS_SHARED_$(SHARED_LIBRARIES))))
 
 PROD_DEPLIB_DIRS = $(foreach word,$(sort $(dir $($*_DEPLIBS) $(PROD_DEPLIBS))), \
-  $(shell $(PERL) $(TOOLS)/fullPathName.pl $(word)))
+  $(shell $(FULLPATHNAME) $(word)))
 
 PRODDIR_LDFLAGS += $(PROD_DEPLIB_DIRS:%=-L%)
 

configure/os/CONFIG.Common.cygwin-x86_64

@@ -0,0 +1,14 @@
+# CONFIG.Common.cygwin-x86_64
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for cygwin-x86_64 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.cygwin-x86_64
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.Common.cygwin-x86
+
+ARCH_DEP_CFLAGS = -m64
+ARCH_DEP_LDFLAGS = -m64
+

configure/os/CONFIG.Common.ios-arm

@@ -11,6 +11,8 @@
 IOS_PLATFORM = iPhoneOS
 
 OP_SYS_CFLAGS += -fno-inline-functions
+OP_SYS_CFLAGS += -miphoneos-version-min=$(IOS_DEPLOYMENT_TARGET)
+OP_SYS_LDFLAGS += -miphoneos-version-min=$(IOS_DEPLOYMENT_TARGET)
 
 # iOS optimization flags for arm architecture
 OPT_CFLAGS_YES = -O2

configure/os/CONFIG.Common.ios-x86

@@ -10,10 +10,8 @@
 
 IOS_PLATFORM = iPhoneSimulator
 
-#
-# Architecture-specific information
-#
-ARCH_CLASS = i386
+OP_SYS_CFLAGS += -mios-simulator-version-min=$(IOS_DEPLOYMENT_TARGET)
+OP_SYS_LDFLAGS += -mios-simulator-version-min=$(IOS_DEPLOYMENT_TARGET)
 
 # Include definitions common to all iOS targets
 include $(CONFIG)/os/CONFIG.Common.iosCommon

configure/os/CONFIG.Common.iosCommon

@@ -25,7 +25,7 @@ OS_CLASS = iOS
 #--------------------------------------------------
 # GNU and SDK directories
 GNU_DIR = $(PLATFORM_DIR)/Developer/usr
-SDK_DIR = $(PLATFORM_DIR)/Developer/SDKs/$(IOS_PLATFORM)$(IOS_VERSION).sdk
+SDK_DIR = $(PLATFORM_DIR)/Developer/SDKs/$(IOS_PLATFORM).sdk
 
 #-------------------------------------------------------
 # Build architecture flags
@@ -40,7 +40,7 @@ ARCH_DEP_LDFLAGS += $(ARCH_DEP_FLAGS)
 
 #--------------------------------------------------
 # Operating system flags
-OP_SYS_CFLAGS += -isysroot $(SDK_DIR) -D__IPHONE_OS_VERSION_MIN_REQUIRED=30200
+OP_SYS_CFLAGS += -isysroot $(SDK_DIR)
 OP_SYS_LDFLAGS += -isysroot $(SDK_DIR)
 
 #--------------------------------------------------
@@ -73,7 +73,7 @@ OP_SYS_LDFLAGS += -dynamic -Z -L$(SDK_DIR)/usr/lib -L$(SDK_DIR)/usr/lib/system
 # Shared libraries
 SHRLIB_VERSION = $(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)
 SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined suppress \
-       -install_name $(shell $(PERL) $(TOOLS)/fullPathName.pl $(INSTALL_LIB))/$@ \
+       -install_name $(shell $(FULLPATHNAME) $(INSTALL_LIB))/$@ \
        -compatibility_version $(EPICS_VERSION).$(EPICS_REVISION) \
        -current_version $(SHRLIB_VERSION)
 SHRLIB_SUFFIX_BASE = .dylib
@@ -104,6 +104,9 @@ HDEPENDS_METHOD = CMD
 -include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).iosCommon
 
 #--------------------------------------------------
-# Find the Xcode compilers for the specified SDK just once
+# Find the Xcode programs for the selected SDK
 CC := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find $(CC_$(COMPILER)))
 CCC := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find $(CCC_$(COMPILER)))
+AR := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find ar) -rc
+LD := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find ld) -r
+RANLIB := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find ranlib)

configure/os/CONFIG.Common.linux-arm

@@ -1,9 +1,7 @@
 # CONFIG.Common.linux-arm
 #
-# This file is maintained by the build community.
-#
 # Definitions for linux-arm target builds
-# Sites may override these definitions in CONFIG_SITE.Common.linux-arm
+# Override these settings in CONFIG_SITE.Common.linux-arm
 #-------------------------------------------------------
 
 # Include definitions common to all Linux targets
@@ -11,26 +9,3 @@ include $(CONFIG)/os/CONFIG.Common.linuxCommon
 
 ARCH_CLASS = arm
 
-ifeq ($(BUILD_CLASS),CROSS)
-    VALID_BUILDS = Ioc
-    GNU_TARGET = arm-linux
-
-    # prefix of compiler tools
-    CMPLR_SUFFIX =
-    CMPLR_PREFIX = $(addsuffix -,$(GNU_TARGET))
-
-    # Provide a link-time path for shared libraries
-    SHRLIBDIR_RPATH_LDFLAGS_YES += $(SHRLIB_DEPLIB_DIRS:%=-Wl,-rpath-link,%)
-    SHRLIBDIR_LDFLAGS += $(SHRLIBDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
-
-    # Provide a link-time path for products
-    PRODDIR_RPATH_LDFLAGS_YES += $(PROD_DEPLIB_DIRS:%=-Wl,-rpath-link,%)
-    PRODDIR_LDFLAGS += $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
-
-    # Provide a link-time path for readline 
-    RUNTIME_LDFLAGS_READLINE_YES = -Wl,-rpath-link,$(GNU_DIR)/lib
-    RUNTIME_LDFLAGS_READLINE = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
-    RUNTIME_LDFLAGS_READLINE_CURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
-    RUNTIME_LDFLAGS_READLINE_NCURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
-
-endif

configure/os/CONFIG.Common.linux-arm-debug

@@ -0,0 +1,13 @@
+# CONFIG.Common.linux-arm-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-arm with debug compiler flags
+# Override these settings in CONFIG_SITE.Common.linux-arm-debug
+#-------------------------------------------------------
+
+# Include definitions common to all linux-arm target archs
+include $(CONFIG)/os/CONFIG.Common.linux-arm
+
+HOST_OPT=NO

configure/os/CONFIG.Common.linuxCommon

@@ -12,13 +12,10 @@ include $(CONFIG)/os/CONFIG.Common.UnixCommon
 
 OS_CLASS = Linux
 
-CODE_CPPFLAGS = -D_REENTRANT
-
-POSIX_CPPFLAGS = -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_SOURCE=500
+# Define _GNU_SOURCE and _DEFAULT_SOURCE for maximum portability
+POSIX_CPPFLAGS = -D_GNU_SOURCE -D_DEFAULT_SOURCE
 POSIX_LDLIBS = -lpthread
 
-# -D_BSD_SOURCE for gethostname() in unistd.h as needed by cacChannelIO.cpp.
-OP_SYS_CPPFLAGS += -D_BSD_SOURCE
 OP_SYS_CPPFLAGS += -Dlinux
 OP_SYS_LDLIBS += -lrt -ldl
 

configure/os/CONFIG.Common.solaris-sparc

@@ -21,7 +21,6 @@ COMPILER_LDFLAGS += -mt
 SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
 
 POSIX_CPPFLAGS += -D_POSIX_C_SOURCE=199506L $(POSIX_CPPFLAGS_$(SOLARIS_VERSION))
-POSIX_CPPFLAGS += -D_XOPEN_SOURCE=500
 POSIX_LDLIBS += -lposix4 -lpthread $(POSIX_LDLIBS_$(SOLARIS_VERSION))
 
 OP_SYS_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) $(COMPILER_CPPFLAGS)

configure/os/CONFIG.Common.solaris-x86

@@ -21,7 +21,6 @@ COMPILER_LDFLAGS += -mt
 SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
 
 POSIX_CPPFLAGS += -D_POSIX_C_SOURCE=199506L $(POSIX_CPPFLAGS_$(SOLARIS_VERSION))
-POSIX_CPPFLAGS += -D_XOPEN_SOURCE=500
 POSIX_LDLIBS += -lposix4 -lpthread $(POSIX_LDLIBS_$(SOLARIS_VERSION))
 
 OP_SYS_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) $(COMPILER_CPPFLAGS)
@@ -53,6 +52,7 @@ OP_SYS_LDLIBS += -lsocket -lnsl
 OP_SYS_LDLIBS_8 += -ldl -lCrun -lc
 OP_SYS_LDLIBS_9 += -ldl -lCrun -lc
 OP_SYS_LDLIBS_10 += -lCrun -lc
+OP_SYS_LDLIBS_11 += -lCrun -lc
 OP_SYS_LDLIBS += $(OP_SYS_LDLIBS_$(SOLARIS_VERSION))
 OP_SYS_LDLIBS += $(STLPORT_LDLIBS_$(USE_STLPORT))
 

configure/os/CONFIG.Common.solaris-x86-gnu

@@ -17,4 +17,5 @@ STLPORT_LDLIBS_NO =
 OP_SYS_LDLIBS_8 = -ldl -lc
 OP_SYS_LDLIBS_9 = -ldl -lc
 OP_SYS_LDLIBS_10 = -lc
+OP_SYS_LDLIBS_11 = -lc
 

configure/os/CONFIG.Common.vxWorks-486

@@ -11,14 +11,13 @@
 include $(CONFIG)/os/CONFIG.Common.vxWorksCommon
 
 # Vx GNU cross compiler suffix
-CMPLR_SUFFIX = 386
+CMPLR_SUFFIX = pentium
  
-ARCH_CLASS = pc486
+ARCH_CLASS = x86
 
-ARCH_DEP_CPPFLAGS = -DCPU=I80486 -D_X86_ 
-ARCH_DEP_CFLAGS = -m486
-ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop
+ARCH_DEP_CPPFLAGS = -DCPU=I80486 -D_X86_
+ARCH_DEP_CFLAGS = -mtune=i486 -march=i486
+ARCH_DEP_CFLAGS += -fno-zero-initialized-in-bss -fno-defer-pop
 
 # Allow site overrides
 -include $(CONFIG)/os/CONFIG_SITE.Common.vxWorks-486

configure/os/CONFIG.Common.vxWorks-pentium

@@ -11,12 +11,14 @@
 include $(CONFIG)/os/CONFIG.Common.vxWorksCommon
 
 # Vx GNU cross compiler suffix
-CMPLR_SUFFIX = 386
- 
-ARCH_CLASS = pcPentium
+CMPLR_SUFFIX = pentium
 
-ARCH_DEP_CPPFLAGS = -DCPU=PENTIUM -D_X86_ 
-ARCH_DEP_CFLAGS = -mpentium
-ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop
+ARCH_CLASS = x86
+
+ARCH_DEP_CPPFLAGS = -DCPU=PENTIUM -D_X86_
+ARCH_DEP_CFLAGS = -mtune=pentium -march=pentium
+ARCH_DEP_CFLAGS += -fno-zero-initialized-in-bss -fno-defer-pop
+
+# Allow site overrides
+-include $(CONFIG)/os/CONFIG_SITE.Common.vxWorks-pentium
 

configure/os/CONFIG.Common.vxWorksCommon

@@ -93,6 +93,7 @@ VX_GNU_VERSION_6.5 = 3.4.4
 VX_GNU_VERSION_6.6 = 4.1.2
 VX_GNU_VERSION_6.7 = 4.1.2
 VX_GNU_VERSION_6.8 = 4.1.2
+VX_GNU_VERSION_6.9 = 4.3.3
 VX_GNU_VERSION = $(VX_GNU_VERSION_$(VXWORKS_VERSION))
 
 VX_GNU_MAJOR_VERSION = $(basename $(basename $(VX_GNU_VERSION)))
@@ -134,6 +135,7 @@ NM_DIR_6.5 = $(WORKBENCH_BIN)
 NM_DIR_6.6 = $(WORKBENCH_BIN)
 NM_DIR_6.7 = $(GNU_BIN)
 NM_DIR_6.8 = $(UTILITIES_BIN)
+NM_DIR_6.9 = $(UTILITIES_BIN)
 NM_DIR = $(firstword $(NM_DIR_$(VXWORKS_VERSION)) $(GNU_BIN))
 
 NM = $(NM_DIR)/$(CMPLR_PREFIX)nm$(CMPLR_SUFFIX)$(HOSTEXE)

configure/os/CONFIG.Common.win32-x86-mingw

@@ -34,7 +34,8 @@ ARCH_DEP_LDFLAGS += -m32
 # Override for -DUNIX from CONFIG.Common.UnixCommon
 OP_SYS_CPPFLAGS = -D_MINGW
 
-EXE=.exe
+EXE = .exe
+RES = .coff
 
 VISC_DLL_NO = -DEPICS_DLL_NO
 VISC_DLL_YES =

configure/os/CONFIG.Common.windows-x64-mingw

@@ -0,0 +1,15 @@
+# CONFIG.Common.windows-x64-mingw
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-mingw target builds
+# Sites may override these definitions in CONFIG_SITE.Common.windows-x64-mingw
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.Common.win32-x86-mingw
+
+ARCH_CLASS = x64
+
+ARCH_DEP_CFLAGS = -m64
+ARCH_DEP_LDFLAGS = -m64

configure/os/CONFIG.cygwin-x86_64.Common

@@ -0,0 +1,10 @@
+# CONFIG.cygwin-x86_64.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for cygwin-x86_64 host archs
+# Sites may override these definitions in CONFIG_SITE.cygwin-x86_64.Common
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.cygwin-x86.Common

configure/os/CONFIG.cygwin-x86_64.cygwin-x86_64

@@ -0,0 +1,11 @@
+#  CONFIG.cygwin-x86_64.cygwin-x86_64
+#
+# $Revision-Id$
+#
+# Definitions for cygwin-x86_64 host - cygwin-x86_64 target builds
+# Sites may override these definitions in CONFIG_SITE.cygwin-x86_64.cygwin-x86_64
+#-------------------------------------------------------
+
+# Include common gnu compiler definitions
+include $(CONFIG)/os/CONFIG.cygwin-x86.cygwin-x86
+

configure/os/CONFIG.darwinCommon.darwinCommon

@@ -59,15 +59,17 @@ COMMANDLINE_LIBRARY=READLINE
 
 GNU_DIR = /usr
 
-CC = $(GNU_BIN)/cc
-CCC = $(GNU_BIN)/c++
+# Apple soft-links these compilers to clang/clang++
+CC = cc
+CCC = c++
+GNU = NO
 
 #
 # Darwin shared libraries
 #
 SHRLIB_VERSION = $(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)
 SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined suppress \
-       -install_name $(shell $(PERL) $(TOOLS)/fullPathName.pl $(INSTALL_LIB))/$@ \
+       -install_name $(shell $(FULLPATHNAME) $(INSTALL_LIB))/$@ \
        -compatibility_version $(EPICS_VERSION).$(EPICS_REVISION) \
        -current_version $(SHRLIB_VERSION)
 SHRLIB_SUFFIX_BASE = .dylib

configure/os/CONFIG.linux-arm-debug.Common

@@ -0,0 +1,12 @@
+# CONFIG.linux-arm-debug.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-arm-debug host builds
+# Override these settings in CONFIG_SITE.linux-arm-debug.Common
+#-------------------------------------------------------
+
+#Include definitions common to linux-arm hosts
+include $(CONFIG)/os/CONFIG.linux-arm.Common
+

configure/os/CONFIG.linux-arm-debug.linux-arm-debug

@@ -0,0 +1,14 @@
+# CONFIG.linux-arm-debug.linux-arm-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-arm-debug host and target build
+# Override these settings in CONFIG_SITE.linux-arm-debug.linux-arm-debug
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.linux-arm.linux-arm
+
+# Removes -O optimization and adds -g compile option
+HOST_OPT=NO
+

configure/os/CONFIG.linux-arm.linux-arm-debug

@@ -0,0 +1,15 @@
+# CONFIG.linux-arm.linux-arm-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-arm host - linux-arm-debug target build
+# Override these settings in CONFIG_SITE.linux-arm.linux-arm-debug
+#-------------------------------------------------------
+
+-include $(CONFIG)/os/CONFIG.linux-arm.linux-arm
+-include $(CONFIG)/os/CONFIG_SITE.Common.linux-arm
+-include $(CONFIG)/os/CONFIG_SITE.linux-arm.linux-arm
+
+BUILD_CLASS=HOST
+HOST_OPT=NO

configure/os/CONFIG.linux-x86.linux-arm

@@ -1,10 +1,31 @@
 # CONFIG.linux-x86.linux-arm
 #
 # Definitions for linux-x86 host - linux-arm target builds
-# Sites may override these definitions in CONFIG_SITE.linux-x86.linux-arm
+# Override these settings in CONFIG_SITE.linux-x86.linux-arm
 #-------------------------------------------------------
 
-# Copied from x86.x86
+VALID_BUILDS = Ioc
+GNU_TARGET = arm-linux
+
+# prefix of compiler tools
+CMPLR_SUFFIX =
+CMPLR_PREFIX = $(addsuffix -,$(GNU_TARGET))
+
+# Provide a link-time path for shared libraries
+SHRLIBDIR_RPATH_LDFLAGS_YES += $(SHRLIB_DEPLIB_DIRS:%=-Wl,-rpath-link,%)
+SHRLIBDIR_LDFLAGS += $(SHRLIBDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
+
+# Provide a link-time path for products
+PRODDIR_RPATH_LDFLAGS_YES += $(PROD_DEPLIB_DIRS:%=-Wl,-rpath-link,%)
+PRODDIR_LDFLAGS += $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
+
+# Provide a link-time path for readline 
+RUNTIME_LDFLAGS_READLINE_YES = -Wl,-rpath-link,$(GNU_DIR)/lib
+RUNTIME_LDFLAGS_READLINE = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+RUNTIME_LDFLAGS_READLINE_CURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+RUNTIME_LDFLAGS_READLINE_NCURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+
+# Library flags
 STATIC_LDFLAGS_YES= -Wl,-Bstatic
 STATIC_LDFLAGS_NO= 
 STATIC_LDLIBS_YES= -Wl,-Bdynamic

configure/os/CONFIG.linux-x86.linux-arm-debug

@@ -0,0 +1,9 @@
+# CONFIG.linux-x86.linux-arm-debug
+#
+# Definitions for linux-x86 host - linux-arm-debug target builds
+# Override these settings in CONFIG_SITE.linux-x86.linux-arm-debug
+#-------------------------------------------------------
+
+# Include definitions for linux-arm targets
+include $(CONFIG)/os/CONFIG.linux-x86.linux-arm
+

configure/os/CONFIG.linux-x86.win32-x86-mingw

@@ -0,0 +1,22 @@
+# CONFIG.linux-x86.win32-x86-mingw
+#
+# Definitions for linux-x86 host win32-x86-mingw target builds
+# Override these definitions in CONFIG_SITE.linux-x86.win32-x86-mingw
+#-------------------------------------------------------
+
+# Include common gnu compiler definitions
+include $(CONFIG)/CONFIG.gnuCommon
+
+# Add resource compiler
+RCCMD = $(CMPLR_PREFIX)windres$(CMPLR_SUFFIX) $(INCLUDES) $< $@
+
+# Remove -fPIC flags, add out-implib
+SHRLIB_CFLAGS =
+SHRLIB_LDFLAGS = -shared -Wl,--out-implib,$(LIB_PREFIX)$*$(LIB_SUFFIX)
+LOADABLE_SHRLIB_LDFLAGS = -shared -Wl,--out-implib,$(LIB_PREFIX)$*$(LIB_SUFFIX)
+
+# Don't link with gcc library
+GNU_LDLIBS_YES =
+
+# Link with winsock2
+OP_SYS_LDLIBS = -lws2_32

configure/os/CONFIG.linux-x86_64.linux-arm

@@ -0,0 +1,8 @@
+# CONFIG.linux-x86_64.linux-arm
+#
+# Definitions for linux-x86_64 host - linux-arm target builds
+# Sites may override these definitions in CONFIG_SITE.linux-x86_64.linux-arm
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.linux-x86.linux-arm
+

configure/os/CONFIG.linux-x86_64.linux-arm-debug

@@ -0,0 +1,8 @@
+# CONFIG.linux-x86_64.linux-arm-debug
+#
+# Definitions for linux-x86_64 host - linux-arm-debug target builds
+# Override these settings in CONFIG_SITE.linux-x86_64.linux-arm-debug
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.linux-x86.linux-arm
+

configure/os/CONFIG.linux-x86_64.win32-x86-mingw

@@ -0,0 +1,9 @@
+# CONFIG.linux-x86_64.win32-x86-mingw
+#
+# Definitions for linux-x86_64 host win32-x86-mingw target builds
+# Override these definitions in CONFIG_SITE.linux-x86_64.win32-x86-mingw
+#-------------------------------------------------------
+
+# Settings as for the linux-x86 host architecture
+include $(CONFIG)/os/CONFIG.linux-x86.win32-x86-mingw
+

configure/os/CONFIG.solarisCommon.solarisCommon

@@ -7,9 +7,10 @@
 # Sites may override these definitions in CONFIG_SITE.solaris-sparc.solaris-sparc
 #-------------------------------------------------------
 
-SPARCWORKS = /opt/SUNWspro
 GNU = NO
 
+# SPARCWORKS path is set in a CONFIG_SITE file
+
 CC = $(SPARCWORKS)/bin/cc
 CCC = $(SPARCWORKS)/bin/CC
 CPP = $(CC) -E -Qn

configure/os/CONFIG.win32-x86-borland.win32-x86-borland

@@ -261,7 +261,7 @@ LINK.cpp += , $@ ,,$(LINKLIBS)  $(subst /,\\,$(PROD_LDLIBS))
 #--------------------------------------------------
 
 # override of CONFIG_COMMON
-HDEPENDS_INCLUDES_MKMF = $(filter-out $(BORLAND_INC),$(subst -I,,$(INCLUDES)))
+HDEPENDS_INCLUDES_MKMF = $(filter-out $(addprefix -I,$(BORLAND_INC)),$(INCLUDES))
 
 
 TDS = $(addsuffix .tds,$(basename $(PROD) $(TESTPROD) $(BUILD_LIBRARY)))

configure/os/CONFIG.win32-x86-mingw.win32-x86-mingw

@@ -9,21 +9,27 @@
 # Include common gnu compiler definitions
 include $(CONFIG)/CONFIG.gnuCommon
 
-# gcc, g++, ar, ld, and ranlib must be in user's path
-CC = gcc
-CCC = g++
-AR = ar -rc
-LD = ld -r
-RANLIB = ranlib
-RES=.coff
-RCCMD = windres $(INCLUDES) $< $@
+# Undo various things set by CONFIG.gnuCommon
 
-# No -fPIC avoids "-fPIC ignored for target (all code is position independent)"
+CMPLR_PREFIX =
+
+# Remove $(GNU_BIN)/ path
+CC  = $(CMPLR_PREFIX)gcc
+CCC = $(CMPLR_PREFIX)g++
+AR  = $(CMPLR_PREFIX)ar -rc
+LD  = $(CMPLR_PREFIX)ld -r
+RANLIB = $(CMPLR_PREFIX)ranlib
+
+# Add resource compiler
+RCCMD = $(CMPLR_PREFIX)windres $(INCLUDES) $< $@
+
+# Remove -fPIC flags, add out-implib
 SHRLIB_CFLAGS =
 SHRLIB_LDFLAGS = -shared -Wl,--out-implib,$(LIB_PREFIX)$*$(LIB_SUFFIX)
 LOADABLE_SHRLIB_LDFLAGS = -shared -Wl,--out-implib,$(LIB_PREFIX)$*$(LIB_SUFFIX)
 
-# Override linking with gcc library from CONFIG.gnuCommon
+# Don't link with gcc library
 GNU_LDLIBS_YES =
 
-OP_SYS_LDLIBS = -lws2_32 
+# Link with winsock2
+OP_SYS_LDLIBS = -lws2_32

configure/os/CONFIG.win32-x86-static.Common

@@ -0,0 +1,11 @@
+# CONFIG.win32-x86-static.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for win32-x86-static host archs
+# Sites may override these definitions in CONFIG_SITE.win32-x86-static.Common
+#-------------------------------------------------------
+
+include  $(CONFIG)/os/CONFIG.win32-x86.Common
+

configure/os/CONFIG.win32-x86-static.win32-x86-static

@@ -0,0 +1,13 @@
+# CONFIG.win32-x86-static.win32-x86.static
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for win32-x86-static target archs when host arch is win32-x86-static
+# Sites may override these definitions in CONFIG_SITE.win32-x86-static.win32-x86-static
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.win32-x86.win32-x86
+
+SHARED_LIBRARIES = NO
+STATIC_BUILD = YES

configure/os/CONFIG.win32-x86.win32-x86

@@ -189,7 +189,8 @@ OP_SYS_CXXFLAGS = $(COMPILER_CXXFLAGS)
 #		'-entry:_DllMainCRTStartup$(DLLENTRY)'
 DLLENTRY = @12
 
-WIN32_DLLFLAGS = /subsystem:windows /dll $(OPT_LDFLAGS) $(USR_LDFLAGS) $(TARGET_LDFLAGS) $(LIB_LDFLAGS)
+WIN32_DLLFLAGS = /subsystem:windows /dll $(OPT_LDFLAGS) \
+ $(USR_LDFLAGS) $(CMD_LDFLAGS) $(TARGET_LDFLAGS) $(LIB_LDFLAGS)
 
 #
 # specify dll .def file only if it exists

configure/os/CONFIG.win32-x86.win32-x86-static

@@ -0,0 +1,14 @@
+# CONFIG.win32-x86.win32-x86-static
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for win32-x86-static target archs when host arch is win32-x86
+# Sites may override these definitions in CONFIG_SITE.win32-x86.win32-x86-static
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.win32-x86.win32-x86
+
+BUILD_CLASS = HOST
+SHARED_LIBRARIES = NO
+STATIC_BUILD = YES

configure/os/CONFIG.windows-x64-mingw.Common

@@ -0,0 +1,11 @@
+# CONFIG.windows-x64-mingw.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-mingw host archs
+# Sites may override these definitions in CONFIG_SITE.windows-x64-mingw.Common
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.win32-x86-mingw.Common
+

configure/os/CONFIG.windows-x64-mingw.windows-x64-mingw

@@ -0,0 +1,11 @@
+# CONFIG.windows-x64-mingw.windows-x64-mingw
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-mingw target archs
+# Sites may override these definitions in CONFIG_SITE.windows-x64-mingw.windows-x64-mingw
+#-------------------------------------------------------
+
+# Include common gnu compiler definitions
+include $(CONFIG)/os/CONFIG.win32-x86-mingw.win32-x86-mingw

configure/os/CONFIG.windows-x64-static.Common

@@ -0,0 +1,11 @@
+# CONFIG.windows-x64-static.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-static host archs
+# Sites may override these definitions in CONFIG_SITE.windows-x64-static.Common
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.windows-x64.Common
+

configure/os/CONFIG.windows-x64-static.windows-x64-static

@@ -0,0 +1,13 @@
+# CONFIG.windows-x64-static.windows-x64-static
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-static target archs when host arch is windows-x64-static
+# Sites may override these definitions in CONFIG_SITE.windows-x64-static.windows-x64-static
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.windows-x64.windows-x64
+
+SHARED_LIBRARIES = NO
+STATIC_BUILD= YES

configure/os/CONFIG.windows-x64.windows-x64-debug

@@ -0,0 +1,12 @@
+# CONFIG.windows-x64.windows-x64-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64 compiler host - windows-x64 debug compiler target builds
+# Sites may override these definitions in CONFIG_SITE.windows-x64.windows-x64-debug
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.windows-x64.windows-x64
+
+HOST_OPT=NO

configure/os/CONFIG.windows-x64.windows-x64-static

@@ -0,0 +1,14 @@
+# CONFIG.windows-x86.windows-x86-static
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-static target archs when host arch is windows-x64
+# Sites may override these definitions in CONFIG_SITE.windows-x64.windows-x64-static
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.windows-x64.windows-x64
+
+BUILD_CLASS = HOST
+SHARED_LIBRARIES = NO
+STATIC_BUILD = YES

configure/os/CONFIG_SITE.Common.RTEMS

@@ -1,17 +1,26 @@
+# CONFIG_SITE.Common.RTEMS
+#
+# $Revision-Id$
 #
 # Site-specific information for all RTEMS targets
-#
 #-------------------------------------------------------
 
 # Where to find RTEMS
 #
+# APS:
 RTEMS_VERSION = 4.10.2
-RTEMS_BASE = /usr/local/rtems/rtems-$(RTEMS_VERSION)
+RTEMS_BASE = /usr/local/vw/rtems/rtems-$(RTEMS_VERSION)
 
 # Cross-compile toolchain in $(RTEMS_TOOLS)/bin
 #
 RTEMS_TOOLS = $(RTEMS_BASE)
 
+# Link Generic System loadable objects instead of full executable.
+#
+# A GeSys object is similar to a shared library.  It can be (un)loaded
+# at runtime by the Generic System loader which is available as a
+# patch against RTEMS.
+USE_GESYS = NO
 
 # If you're using neither BOOTP/DHCP nor FLASH to pick up your IOC
 # network configuration you must uncomment and specify your Internet

configure/os/CONFIG_SITE.Common.cygwin-x86_64

@@ -0,0 +1,14 @@
+# CONFIG_SITE.Common.cygwin-x86_64
+#
+# $Revision-Id$
+#
+# Site Specific definitions for cygwin-x86_64 target
+# Only the local epics system manager should modify this file
+
+# If readline is installed uncomment the following line
+# to add command-line editing and history support
+#COMMANDLINE_LIBRARY = READLINE
+
+# Uncomment the following line if readline has problems
+#LDLIBS_READLINE = -lreadline -lcurses
+

configure/os/CONFIG_SITE.Common.darwin-x86

@@ -14,19 +14,19 @@ ARCH_CLASS = x86_64
 #ARCH_CLASS = i386 x86_64
 
 #
-# Comment out the following 3 lines to build with Apple's GCC instead of CLANG.
+# Uncomment the following 3 lines to build with Apple's GCC instead of CLANG.
 #
-CC  = clang
-CCC = clang++
-GNU = NO
+#CC  = gcc
+#CCC = g++
+#GNU = YES
 
 
-# To use MacPorts GCC, comment out ALL the settings above this line,
-# then uncomment (and modify if necessary) the following instead:
+# To use MacPorts GCC uncomment (and modify if necessary) the following:
 
 #GNU_DIR = /opt/local
 #CC = $(GNU_BIN)/gcc -m64
 #CCC = $(GNU_BIN)/g++ -m64
+#GNU = YES
 
 # If you see this or similar errors while building in the src/cap5 directory
 #   gcc: error: unrecognized option '-no-cpp-precomp'

configure/os/CONFIG_SITE.Common.ios-arm

@@ -16,11 +16,17 @@
 #
 #   Xcode 4.5 dropped support for the ARMv6.
 #
-#   ARMv7s devices: iPhone 5
-#   ARMv6 devices: iPhone 1 and 3G, iPod Touch Gen 1 and 2
-#   All other devices are ARMv7
+#   arm64 devices:  iPhone 5S, 6 and 6 Plus, iPad Air Gen 1 and 2,
+#                   iPad Mini Gen 2 and 3
+#   armv7s devices: iPhone 5 and 5C, iPad Gen 4
+#   armv7 devices:  iPhone 3GS, 4 and 4S, iPod Touch Gen 3 to 5
+#                   iPad Gen 1 to 3, iPad Mini, Apple TV Gen 2 and 3
+#   armv6 devices:  iPhone 1 and 3G, iPod Touch Gen 1 and 2
 
-ARCH_CLASS = armv7 armv7s
+#ARCH_CLASS = arm64
+#ARCH_CLASS = armv7s arm64
+ARCH_CLASS = armv7 armv7s arm64
+#ARCH_CLASS = armv7 armv7s
 #ARCH_CLASS = armv7
 #ARCH_CLASS = armv6 armv7
 #ARCH_CLASS = armv6

configure/os/CONFIG_SITE.Common.ios-x86

@@ -0,0 +1,18 @@
+# CONFIG_SITE.Common.ios-x86
+#
+# $Revision-Id$
+#
+# Site-specific settings for ios-x86 target builds
+#-------------------------------------------------------
+
+# Which x86 instruction set(s) to generate code for:
+#   The iPhone Simulator now supports both 32-bit and 64-bit
+#   instruction sets since the iPhone 6 uses a 64-bit CPU.
+#
+#   Apple's compilers can build for multiple architectures,
+#   generating a Universal binary.  This is larger and takes
+#   longer to compile, but runs efficiently on all devices.
+
+#ARCH_CLASS = i386
+ARCH_CLASS = i386 x86_64
+#ARCH_CLASS = x86_64

configure/os/CONFIG_SITE.Common.iosCommon

@@ -5,19 +5,20 @@
 # Site-specific settings for Apple iOS builds
 #-------------------------------------------------------
 
-# iOS Version number
+# Minimum version of iOS the executables must run on.
+# Earlier versions may work, if XCode supports them.
 
-#IOS_VERSION = 3.2
-#IOS_VERSION = 4.1
-#IOS_VERSION = 4.2
-#IOS_VERSION = 4.3
-#IOS_VERSION = 5.0
-#IOS_VERSION = 5.1
-IOS_VERSION = 6.0
+#IOS_DEPLOYMENT_TARGET = 5.0
+#IOS_DEPLOYMENT_TARGET = 5.1
+#IOS_DEPLOYMENT_TARGET = 6.0
+#IOS_DEPLOYMENT_TARGET = 6.1
+IOS_DEPLOYMENT_TARGET = 7.0
+#IOS_DEPLOYMENT_TARGET = 8.0
+#IOS_DEPLOYMENT_TARGET = 8.1
 
 
 # Which compiler to use:
-#   CLANG is preferred for recent versions of Xcode
+#   CLANG is required for Xcode 5.0 and later
 #   LLVM_GNU uses the llvm-gcc and llvm-g++ compilers
 #   GNU is needed for older versions of Xcode
 

configure/os/CONFIG_SITE.Common.linux-arm

@@ -0,0 +1,41 @@
+# CONFIG_SITE.Common.linux-arm
+#
+# $Revision-Id$
+#
+# Site Specific definitions for all linux-arm targets
+#-------------------------------------------------------
+
+# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
+# shared libraries will be found automatically.  However if the .so
+# files are installed at a different path to their compile-time path
+# then in order to be found at runtime do one of these:
+# a) LD_LIBRARY_PATH must include the full absolute pathname to
+#    $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when invoking base
+#    executables.
+# b) Add the runtime path to SHRLIB_DEPLIB_DIRS and PROD_DEPLIB_DIRS, which 
+#    will add the named directory to the list contained in the executables.
+# c) Add the runtime path to /etc/ld.so.conf and run ldconfig
+#    to inform the system of the shared library location.
+
+# Depending on your version of Linux you'll want one of the following
+# lines to enable command-line editing and history in iocsh.  If you're
+# not sure which, start with the top one and work downwards until the
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
+
+# No other libraries needed (recent Fedora, Ubuntu etc.):
+#COMMANDLINE_LIBRARY = READLINE
+
+# Needs -lncurses (RHEL 5 etc.):
+#COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# Needs -lcurses (older versions)
+#COMMANDLINE_LIBRARY = READLINE_CURSES
+
+
+# It makes sense to include debugging symbols even in optimized builds
+# in case you want to attach gdb to the process or examine a core-dump.
+# This does cost disk space, but not memory as debug symbols are not
+# loaded into RAM when the binary is loaded.
+OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.linux-x86

@@ -38,3 +38,4 @@ COMMANDLINE_LIBRARY = READLINE
 # This does cost disk space, but not memory as debug symbols are not
 # loaded into RAM when the binary is loaded.
 OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.linux-x86_64

@@ -38,3 +38,4 @@ COMMANDLINE_LIBRARY = READLINE
 # This does cost disk space, but not memory as debug symbols are not
 # loaded into RAM when the binary is loaded.
 OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.linux-xscale_be

@@ -1,9 +1,12 @@
 # CONFIG_SITE.Common.linux-xscale_be
 #
+# $Revision-Id$
+#
 # Site specific definitions for linux-xscale_be target builds.
 #-------------------------------------------------------
 
 # Set GNU_DIR to point to directory containing the tool-chain
 
-GNU_DIR = /usr/local/xscale_be
+# APS:
+GNU_DIR = /usr/local/vw/xscale_be
 

configure/os/CONFIG_SITE.Common.solaris-sparc

@@ -5,11 +5,12 @@
 # Site Specific definitions for solaris-sparc target
 # Only the local epics system manager should modify this file
 
-# If readline is installed uncomment the following macro definition
-# to include command-line editing and history support
-#
+# location of the Solaris Studio (was SunPro) compilers
+SPARCWORKS = /opt/SUNWspro
+#SPARCWORKS = /opt/solarisstudio12.3
 
-# Readline library provides command-line editing and history in IOC shell
+# If readline is installed, uncomment the following macro definition
+# to use it for command-line editing and history support
 #COMMANDLINE_LIBRARY = READLINE
 
 # Use stLport library instead of default Cstd library

configure/os/CONFIG_SITE.Common.solaris-x86

@@ -0,0 +1,11 @@
+# CONFIG_SITE.Common.solaris-x86
+#
+# $Revision-Id$
+#
+# Site Specific definitions for solaris-x86 targets
+# Only the local epics system manager should modify this file
+
+# location of the Solaris Studio (was SunPro) compilers
+SPARCWORKS = /opt/SUNWspro
+#SPARCWORKS = /opt/solarisstudio12.3
+

configure/os/CONFIG_SITE.Common.solaris-x86_64

@@ -5,7 +5,7 @@
 # Site Specific definitions for solaris-x86_64 target
 # Only the local epics system manager should modify this file
 
-# Include definitions common to all solaris-x86_64 target archs
+# Include definitions common to all solaris-x86 target archs
 -include $(CONFIG)/os/CONFIG_SITE.Common.solaris-x86
 
 COMMANDLINE_LIBRARY = EPICS

configure/os/CONFIG_SITE.Common.vxWorksCommon

@@ -20,6 +20,7 @@ VXWORKS_VERSION = 5.5
 #VXWORKS_VERSION = 6.6
 #VXWORKS_VERSION = 6.7
 #VXWORKS_VERSION = 6.8
+#VXWORKS_VERSION = 6.9
 
 
 # Sites may override the following path for a particular host
@@ -40,6 +41,7 @@ WIND_BASE = /usr/local/vw/tornado22-$(ARCH_CLASS)
 #WORKBENCH_VERSION = 2.6
 #WORKBENCH_VERSION = 3.0
 #WORKBENCH_VERSION = 3.2
+#WORKBENCH_VERSION = 3.3
 
 
 # Utilities Version number, required from vxWorks 6.8 and later

configure/os/CONFIG_SITE.Common.win32-x86-mingw

@@ -1,11 +1,9 @@
-# CONFIG_SITE.win32-x86-mingw.Common
+# CONFIG_SITE.Common.win32-x86-mingw
 #
 # $Revision-Id$
 #
-# Site Specific definitions for cygwin-x86 target
-# Only the local epics system manager should modify this file
+# Site Specific definitions for win32-x86-mingw target
 
-# If readline is not installed comment the following line
-# to omit command-line editing and history support
+# If readline is available uncomment the following line
+# to enable command-line editing and history support
 #COMMANDLINE_LIBRARY = READLINE
-

configure/os/CONFIG_SITE.linux-arm-debug.linux-arm-debug

@@ -0,0 +1,13 @@
+# CONFIG_SITE.linux-arm-debug.linux-arm-debug
+#
+# $Revision-Id$
+#
+# Site specific overrides for linux-arm-debug host and target builds
+#-------------------------------------------------------
+
+#Prepares the object code to collect data for profiling with prof. 
+#PROFILE=YES
+
+#Compiles for profiling with the gprof profiler.
+#GPROF=YES
+

configure/os/CONFIG_SITE.linux-x86-debug.linux-x86-debug

@@ -1,3 +1,9 @@
+# CONFIG_SITE.linux-x86-debug.linux-x86-debug
+#
+# $Revision-Id$
+#
+# Site specific overrides for linux-x86-debug host and target builds
+#-------------------------------------------------------
 
 #Prepares the object code to collect data for profiling with prof. 
 #PROFILE=YES

configure/os/CONFIG_SITE.linux-x86.linux-arm

@@ -1,4 +1,4 @@
-#  CONFIG_SITE.linux-x86.linux-arm
+# CONFIG_SITE.linux-x86.linux-arm
 #
 # $Revision-Id$
 #
@@ -8,7 +8,8 @@
 # Tools install path
 #GNU_DIR = /home/targetOS/linux-arm/host/x86-linux/gcc_3.3.3
 
-GNU_DIR = /net/phoebus/vw/zynq-2011.09
+# APS:
+GNU_DIR = /usr/local/vw/zynq-2011.09
 
 # GNU crosscompiler target name
 GNU_TARGET = arm-xilinx-linux-gnueabi

configure/os/CONFIG_SITE.linux-x86.linux-arm-debug

@@ -0,0 +1,9 @@
+# CONFIG_SITE.linux-x86.linux-arm-debug
+#
+# $Revision-Id$
+#
+# Site specific settings for linux-x86 host - linux-arm-debug target builds
+#-------------------------------------------------------
+
+# Inherit settings from linux-arm
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-arm

configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw

@@ -0,0 +1,23 @@
+# CONFIG_SITE.linux-x86.win32-x86-mingw
+#
+# Configuration for linux-x86 host win32-x86-mingw target builds
+#-------------------------------------------------------
+
+# Early versions of the MinGW cross-build tools can only build
+# static (non-DLL) libraries. Fedora's cross-build of gcc 4.4.6
+# needs these uncommented, other distributions have not been
+# tested with this release of Base:
+SHARED_LIBRARIES = NO
+STATIC_BUILD = YES
+
+# The cross-build tools are in $(GNU_DIR)/bin
+# Default is /usr
+#GNU_DIR = /usr/local
+
+# Different distribution cross-build packages use different prefixes:
+# Ubuntu:
+#CMPLR_PREFIX = i686-w64-mingw32-
+# RHEL:
+CMPLR_PREFIX = i686-pc-mingw32-
+# Debian?
+#CMPLR_PREFIX = i586-mingw32msvc-

configure/os/CONFIG_SITE.linux-x86_64-debug.linux-x86_64-debug

@@ -2,10 +2,8 @@
 #
 # $Revision-Id$
 #
-# Site specific override definitions for solaris-sparc host builds
-# Only the local epics system manager should modify this file
-
-
+# Site specific overrides for linux-x86_64 host and target builds
+#-------------------------------------------------------
 
 #Prepares the object code to collect data for profiling with prof. 
 #PROFILE=YES

configure/os/CONFIG_SITE.linux-x86_64.linux-arm

@@ -0,0 +1,9 @@
+# CONFIG_SITE.linux-x86_64.linux-arm
+#
+# $Revision-Id$
+#
+# Site specific settings for linux-x86_64 host - linux-arm target builds
+#-------------------------------------------------------
+
+# Inherit setting from linux-x86
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-arm

configure/os/CONFIG_SITE.linux-x86_64.linux-arm-debug

@@ -0,0 +1,9 @@
+# CONFIG_SITE.linux-x86_64.linux-arm-debug
+#
+# $Revision-Id$
+#
+# Site specific settings for linux-x86_64 host - linux-arm-debug target builds
+#-------------------------------------------------------
+
+# Inherit settings from linux-arm
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-arm

configure/os/CONFIG_SITE.linux-x86_64.win32-x86-mingw

@@ -0,0 +1,8 @@
+# CONFIG_SITE.linux-x86_64.win32-x86-mingw
+#
+# Configuration for linux-x86_64 host win32-x86-mingw target builds
+#-------------------------------------------------------
+
+# Inherit from the linux-x86 host architecture
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.win32-x86-mingw
+

configure/os/CONFIG_SITE.solaris-sparc.Common

@@ -4,7 +4,4 @@
 #
 # Site specific override definitions for solaris-sparc host builds
 # Only the local epics system manager should modify this file
- 
-#INSTALL_LOCATION = /home/phoebus/JBA/testBaseNew
 
-#CROSS_COMPILER_TARGET_ARCHS += vxWorks-ppc604 vxWorks-ppc603 vxWorks-68040

configure/os/CONFIG_SITE.win32-x86-mingw.win32-x86-mingw

@@ -3,15 +3,9 @@
 # $Revision-Id$
 #
 # Site Specific definitions for win32-x86-mingw target
-# Only the local epics system manager should modify this file
 
+# The MinGW bin directory must be in your path.
 
-# Uncomment the following settings for MinGW_w32 releases
-# <MinGW directory>/bin should be in your path
-#CMPLR_PREFIX=i686-w64-mingw32-
-#CC = $(CMPLR_PREFIX)gcc
-#CCC = $(CMPLR_PREFIX)g++
-#AR = $(CMPLR_PREFIX)ar -rc
-#LD = $(CMPLR_PREFIX)ld -r
-#RANLIB = $(CMPLR_PREFIX)ranlib
-
+# Set the compiler prefix for your MinGW installation
+#CMPLR_PREFIX = i686-w64-mingw32-
+#CMPLR_PREFIX = i586-mingw32msvc-

configure/os/CONFIG_SITE.windows-x64-mingw.windows-x64-mingw

@@ -0,0 +1,9 @@
+# CONFIG_SITE.windows-x64-mingw.windows-x64-mingw
+#
+# $Revision-Id$
+#
+# Site Specific definitions for windows-x64-mingw target
+# Only the local epics system manager should modify this file
+
+# Prefix for mingw compiler from cygwin
+#CMPLR_PREFIX = x86_64-w64-mingw32-

documentation/README.1st

@@ -100,7 +100,7 @@
      later.
 
      GNU readline or Tecla library
-     GNU readline and Tecla librararies can be used by the IOC shell to
+     GNU readline and Tecla libraries can be used by the IOC shell to
      provide command line editing and command line history recall and edit.
      GNU readline (or Tecla library) must be installed on your target system
      when COMMANDLINE_LIBRARY is set to READLINE (or TECLA) for that target.
@@ -124,7 +124,7 @@
      EPICS documentation is available through the [3]EPICS website at
      Argonne.
 
-     Release specific documenataion can also be found in the
+     Release specific documentation can also be found in the
      base/documentation directory of the distribution.
 
   Directory Structure
@@ -137,7 +137,7 @@
          base/configure               Operating system independent build config files
          base/configure/os            Operating system dependent build config files
          base/configure/tools         Perl and shell scripts used in the build
-         base/documentation           Distributation documentation
+         base/documentation           Distribution documentation
          base/src                     All epics base source code in subdirectories
          base/src/RTEMS               Code to configure RTEMS for EPICS
          base/src/as                  Access security
@@ -170,7 +170,7 @@
          base/src/libCom/macLib       Macro substitution handler
          base/src/libCom/misc         Miscellaneous utilities
          base/src/libCom/osi          Operating system independent API
-         base/src/libCom/osi/os       Operating system dependant code in subdirectories
+         base/src/libCom/osi/os       Operating system dependent code in subdirectories
          base/src/libCom/ring         Methods for creating and using ring buffers
          base/src/libCom/taskwd       Task watchdog
          base/src/libCom/test         Test tools (timer, semBinary, semMutex,fdmgr, ...)
@@ -206,14 +206,14 @@
 
   Build related components
 
-    base/documentation/README* files
+    base/documentation directory - contains setup, build, and install documents
 
          README.1st           Instructions for setup and building epics base
          README.html          html version of README.1st
-         README.WIN32         Microsoft WIN32 specific instructions
-         README.cxxTemplates  Information about C++ templates in EPICS base
+         README.MS_Windows    Microsoft Windows specific instructions
+         README.cris          Axis CRIS specific instructions
+         README.darwin.html   Installation notes for OS X (Darwin)
          README.niCpu030      NI cpu030 specific instructions
-         README.darwin        Installation notes for Mac OS X (Darwin)
          RELEASE_NOTES.html   Notes on release changes
          KnownProblems.html   List of known problems and workarounds
          Converting*To*.html  Release specific conversion instructions
@@ -240,7 +240,7 @@
          CONFIG_BASE_VERSION   Definitions for EPICS base version number
          CONFIG_COMMON         Definitions common to all builds
          CONFIG_ENV            Definitions of EPICS environment variables
-         CONFIG_SITE           Site specific make defintions
+         CONFIG_SITE           Site specific make definitions
          CONFIG_SITE_ENV       Site defaults for EPICS environment variables
          MAKEFILE              Installs CONFIG* RULES* creates
          CONFIG_APP_INCLUDE
@@ -271,7 +271,7 @@
     base/src/tools directory - contains Perl scripts used for the build
 
          Makefile                Makefile for installing the scripts into cfg dir
-         convertRelease.pl       Performs consistancy checks on RELEASE files
+         convertRelease.pl       Performs consistency checks on RELEASE files
          cvsclean.pl             Remove all .#* files in directory tree
          dos2unix.pl             Converts text file from DOS CR/LF to unix ISO
          expandvars.pl           Tool to expand @VAR@ variables while copying a file

documentation/README.html

@@ -1,4 +1,7 @@
 <!DOCTYPE HTML>
+<!-- Generate the README.1st file from this file using:
+    elinks -dump -no-numbering -no-references -dump-width 80 README.html
+  -->
 <HTML>
 <HEAD>
 <TITLE>README - EPICS Base Installation Instructions</TITLE>
@@ -102,7 +105,7 @@
  For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or later.</P>
 
 <P><B>GNU readline or Tecla library</B><BR>
- GNU readline and Tecla librararies can be used by the IOC shell to
+ GNU readline and Tecla libraries can be used by the IOC shell to
  provide command line editing and command line history recall and edit.
  GNU readline (or Tecla library) must be installed on your target system
  when COMMANDLINE_LIBRARY is set to READLINE (or TECLA) for that target.
@@ -124,7 +127,7 @@
 <H3><A NAME="0_0_8"> Documentation</A></H3>
 <BLOCKQUOTE>EPICS documentation is available through the
  <a href="http://www.aps.anl.gov/epics/">EPICS website</a> at Argonne.
- <P>Release specific documenataion can also be found in the base/documentation
+ <P>Release specific documentation can also be found in the base/documentation
  directory of the distribution.</BLOCKQUOTE>
 
 <H3><A NAME="0_0_10"> Directory Structure</A></H3>
@@ -137,7 +140,7 @@
         base/configure               Operating system independent build config files
         base/configure/os            Operating system dependent build config files
         base/configure/tools         Perl and shell scripts used in the build
-        base/documentation           Distributation documentation
+        base/documentation           Distribution documentation
         base/src                     All epics base source code in subdirectories
         base/src/RTEMS               Code to configure RTEMS for EPICS
         base/src/as                  Access security
@@ -170,7 +173,7 @@
         base/src/libCom/macLib       Macro substitution handler
         base/src/libCom/misc         Miscellaneous utilities
         base/src/libCom/osi          Operating system independent API
-        base/src/libCom/osi/os       Operating system dependant code in subdirectories
+        base/src/libCom/osi/os       Operating system dependent code in subdirectories
         base/src/libCom/ring         Methods for creating and using ring buffers
         base/src/libCom/taskwd       Task watchdog
         base/src/libCom/test         Test tools (timer, semBinary, semMutex,fdmgr, ...)
@@ -210,14 +213,15 @@
 <H3><A NAME="0_0_11"> Build related components</A></H3>
 <BLOCKQUOTE>
 
-<H4>base/documentation/README* files</H4>
+<H4>base/documentation directory - contains setup, build, and install
+ documents</H4>
  <PRE>
         README.1st           Instructions for setup and building epics base
         README.html          html version of README.1st
-        README.WIN32         Microsoft WIN32 specific instructions
-        README.cxxTemplates  Information about C++ templates in EPICS base
+        README.MS_Windows    Microsoft Windows specific instructions
+        README.cris          Axis CRIS specific instructions
+        README.darwin.html   Installation notes for OS X (Darwin)
         README.niCpu030      NI cpu030 specific instructions
-        README.darwin        Installation notes for Mac OS X (Darwin)
         RELEASE_NOTES.html   Notes on release changes
         KnownProblems.html   List of known problems and workarounds
         Converting*To*.html  Release specific conversion instructions
@@ -246,7 +250,7 @@
         CONFIG_BASE_VERSION   Definitions for EPICS base version number
         CONFIG_COMMON         Definitions common to all builds
         CONFIG_ENV            Definitions of EPICS environment variables
-        CONFIG_SITE           Site specific make defintions
+        CONFIG_SITE           Site specific make definitions
         CONFIG_SITE_ENV       Site defaults for EPICS environment variables
         MAKEFILE              Installs CONFIG* RULES* creates
         CONFIG_APP_INCLUDE
@@ -279,7 +283,7 @@
 <H4>base/src/tools directory - contains Perl scripts used for the build</H4>
 <PRE>
         Makefile                Makefile for installing the scripts into cfg dir
-        convertRelease.pl       Performs consistancy checks on RELEASE files
+        convertRelease.pl       Performs consistency checks on RELEASE files
         cvsclean.pl             Remove all .#* files in directory tree
         dos2unix.pl             Converts text file from DOS CR/LF to unix ISO
         expandvars.pl           Tool to expand @VAR@ variables while copying a file

documentation/RELEASE_NOTES.html

@@ -3,16 +3,358 @@
 <html>
 <head>
   <meta http-equiv="content-type" content="text/html; charset=iso-8859-1">
-  <title>EPICS Base R3.14.12.3 Release Notes</title>
+  <title>EPICS Base R3.14.12.5 Release Notes</title>
 </head>
 
 <body lang="en">
-<h1 align="center">EPICS Base Release 3.14.12.3</h1>
+<h1 align="center">EPICS Base Release 3.14.12.5</h1>
 
-<h2 align="center">Changes between 3.14.12.2 and 3.14.12.3</h2>
+<h2 align="center">Changes between 3.14.12.4 and 3.14.12.5</h2>
 
 <!-- Insert new items immediately below here ... -->
 
+<h3>MinGW Cross-builds from Linux</h3>
+
+<p>Build configuration files have been back-ported from the 3.15 branch that
+allows cross-building of the win32-x86-mingw target from either linux-x86 or
+linux-x86_64 hosts. Many Linux distributions now package the necessary MinGW
+cross-build tools and libraries to support this. Adjust the settings in
+configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw and add win32-x86-mingw to
+the CROSS_COMPILER_TARGET_ARCHS variable in configure/CONFIG_SITE or in
+configure/os/CONFIG_SITE.linux-x86.Common.</p>
+
+<h3>Build rules for RTEMS GESYS modules</h3>
+
+<p>RTEMS target builds can now be configured to make GESYS modules by changing
+the <CODE>USE_GESYS=NO</code> setting in the file
+configure/os/CONFIG_SITE.Common.RTEMS to <code>YES</code>.</p>
+
+<h3>Added Make variables for command-line use</h3>
+
+<p>The following variables are now used during the build process, reserved for
+setting on the command-line only (Makefiles should continue to use the
+<code>USR_</code> equivalents):</p>
+
+<ul>
+<li>CMD_INCLUDES</li>
+<li>CMD_CPPFLAGS</li>
+<li>CMD_CFLAGS</li>
+<li>CMD_CXXFLAGS</li>
+<li>CMD_LDFLAGS</li>
+<li>CMD_DBFLAGS</li>
+<li>CMD_DBDFLAGS</li>
+<li>CMD_ARFLAGS</li>
+</ul>
+
+<p>For example:</p>
+
+<blockquote><pre>
+make CMD_INCLUDES=/opt/local/include CMD_LDFLAGS=-L/opt/local/lib
+</pre></blockquote>
+
+<h3>Back-ported dbLoadRecordsHook from the 3.15 branch</h3>
+
+<p>See the Release Notes from the Base 3.15.1 release for details.</p>
+
+<h3>Enhanced API for asTrapWrite listeners</h3>
+
+<p>External software such as the CA Put Logging module that registers a listener
+with the asTrapWrite subsystem was not previously given access to the actual
+data being sent by the CA client. In most cases this was not a problem as the
+listener can look at the field being modified both before and after the
+operation, but if the put processes the record which immediately overwrites the
+new value, the client's value cannot be observed.</p>
+
+<p>This release adds three fields to the asTrapWriteMessage structure that is
+passed to the listener routines. These new fields provide the CA data type, the
+number of array elements, and a pointer to the source data buffer. This change
+is completely backwards compatible with listener code written against the
+original API. The new API can be detected at compile-time as follows:</p>
+
+<blockquote><pre>
+#include "asLib.h"
+
+/* ... */
+
+#ifdef asTrapWriteWithData
+    /* Enhanced API */
+#endif
+</pre></blockquote>
+
+<h3>Back-ported the <q>tapfiles</q> build target from 3.15</h3>
+
+<p>This GNUmake target runs the same tests as the <q>runtests</q> target, but
+instead of summarizing or displaying the output for each test script it creates
+a <q>.tap</q> file inside the architecture build directory which contains the
+detailed test output. The output file can be parsed by continuous integration
+packages such as <a href="http://www.jenkins-ci.org/">Jenkins</a> to show the
+test results.</p>
+
+<h3>Fix buffer overflow in epicsStrnRawFromEscaped()</h3>
+
+<p>Launchpad <a href="https://bugs.launchpad.net/bugs/1388313">bug
+1388313</a> reported by Bruce Hill and Chris Ford.</p>
+
+<h3>Better Cygwin IOC Application Support</h3>
+
+<p>IOC applications built for Cygwin with shared libraries need to have PATH
+configured to include all of the bin directories for support modules listed in
+the RELEASE file. For applications run from the Windows cmd.exe shell the
+Makefile in the application's iocBoot/ioc directory can be set to build a file
+dllPath.bat which performs the appropriate changes to PATH, but this file uses
+syntax which is unique to the cmd.exe shell. Cygwin applications can now add a
+target relPaths.sh to this Makefile, which will generate a file appropriate for
+sourcing in the Bash shell instead.</p>
+
+<p>The makeBaseApp.pl templates now include this file in the list of targets to
+be built in the iocBoot/ioc/Makefile for Cygwin architectures.</p>
+
+<h3>Reject NULL callback functions in ca_array_*_callback</h3>
+
+<p>The two CA routines ca_array_get_callback() and ca_array_put_callback() were
+not checking the pfunc callback function argument for NULL. Passing in a NULL
+would cause the client library to segfault when the callback was called. Doing
+this will now result in the error status ECA_BADFUNCPTR being returned. This
+chage fixes <a href="https://bugs.launchpad.net/bugs/1369626">Launchpad bug
+1369626</a>.</p>
+
+<h3>Support for Solaris 11</h3>
+
+<p>The build rules have been updated to support Solaris 11. Note that APS staff
+may not be able to maintain EPICS on Solaris for much longer, so the existing
+support code is likely to bit-rot and future versions of the OS may not be able
+to build or run EPICS applications unless someone else picks up the maintenance
+tasks.</p>
+
+<h3>Generating OS-specific include files</h3>
+
+<p>A fix has been applied to the build rules to permit OS-specific header files
+to be generated by adding them to the appropriate INC_&lt;osclass&gt; variable.
+To avoid problems with parallel builds, the rule to generate a header file
+should look something like this:</p>
+
+<blockquote><pre>
+$(COMMON_DIR)/os/vxWorks/file.h:
+	$(MKDIR) -p $(dir $@)
+	<i>generate-file</i> -o $(notdir $@)
+	$(MV) $(notdir $@) $@
+</pre></blockquote>
+
+<h3>Added CA->version function to CA Perl Bindings</h3>
+
+<p>This new function returns the version string from Base. The ca*.pl tools have
+been updated to display this in their help output.</p>
+
+<h3>epicsString.h comparison functions fixed</h3>
+
+<p>The case-independent string comparison functions epicsStrCaseCmp() and
+epicsStrnCaseCmp() were returning incorrect results when the strings did not
+match; if the left-hand string is a shorter sub-set of the right-hand one the
+result should be -1. These functions now match their BSD equivalents.</p>
+
+<h3>Windows -static targets included</h3>
+
+<p>The win32-x86 and windows-x64 host target architectures can now cross-build
+the associated -static target, i.e. win32-x86-static or windows-x64-static
+(these targets can also be used as regular host architectures). Users could
+always have added configuration files themselves to build these, but we needed
+them for continuous integration testing of static builds.</p>
+
+<h3>iOS Build Rules fixed</h3>
+
+<p>The problem building for the ios-x86 simulator target architecture has been
+resolved.</p>
+
+<h2 align="center">Changes between 3.14.12.3 and 3.14.12.4</h2>
+
+<h3>New test for environment variables</h3>
+
+<p>A new test program epicsEnvTest has been added to the libCom tests which
+checks environment variable APIs. It was written to confirm that threads see
+environment variable values that have been set in their parent thread. VxWorks
+6.x boot images must be configured with ENV_VAR_USE_HOOKS set to FALSE for the
+correct behaviour to occur (a test failure on VxWorks explains this).</p>
+
+<h3>Inclusion of &lt;top&gt;/cfg/* files refined</h3>
+
+<p>The way the build system includes files installed in the &lt;top&gt;/cfg/*
+directory has been cleaned up. Files whose names begin with CONFIG will now get
+included by the CONFIG step, and files whose names begin with RULES will get
+included in the RULES step. These files are only ever included when GNUMake is
+working in an application build (O.) directory and T_A is defined, so they
+cannot be used to create generic build targets at other levels.</p>
+
+<p>Files whose names don't start with either CONFIG or RULES are no longer
+included automatically, but such files can still be installed into
+&lt;top&gt;/cfg by naming them in the CFG variable.</p>
+
+<h3>Fixed iocsh stream redirection for several commands</h3>
+
+<p>A number of iocsh commands did not respond correctly to redirection of their
+output using the iocsh '>file' or '2>error-file' syntax, and redirecting an
+empty command could create files with garbage names. There may still be a few
+commands that do not properly redirect their output, please notify the core
+developers if you discover any. Thanks to Eric Norum for the iocsh changes.</p>
+
+<p>For externally developed commands, the simplest way to support redirection in
+your C/C++ code is to <tt>#include "epicsStdioRedirect.h"</tt> instead of
+<tt>stdio.h</tt>.</p>
+
+<h3>Fixed crash on loading record instance of unknown type</h3>
+
+<p>Fixed segfault when dbLoadRecords tried to load a record of a type that was
+not defined in its DBD files.</p>
+
+<h3>Hex literal support in epicStrtod()</h3>
+
+<p>Some OS implementations of the standard C library routine strtod() do not
+recognize hexadecimal integers, in particular the libraries provided on Windows
+and VxWorks. The internal implementation of epicsStrtod() that these targets use
+now recognizes the 0x prefix and will convert hex numbers correctly. Thanks to
+Dirk Zimoch for suggesting this change.</p>
+
+<h3>Added support for 64-bit Cygwin and MinGW targets</h3>
+
+<p>Both windows-x64-mingw and cygwin-x86_64 build targets are now provided.</p>
+
+<h3>Windows build issues</h3>
+
+<p>Thanks to Peter Heesterman for suggesting a number of small changes that
+clean up build issues on Windows, mostly related to symbol import and export
+to/from DLLs.</p>
+
+<h3>CAS: GDD Reference Count Underflow</h3>
+
+<p>Thanks to Bruce Hill a source of an underflow in a GDD reference count in the
+CAS code has been fixed.</p>
+
+<h3>Support for Apple Xcode 5.0</h3>
+
+<p>This adds the ability to build for iOS 7.0 and the ARMv8 64-bit CPU on the
+newest iPhone 5S device. Unfortunately the Xcode upgrade breaks the build of the
+ios-x86 simulator target, although the ios-arm target successfully builds code
+which runs fine on the real hardware.</p>
+
+<h3>Reading TSEL field</h3>
+
+<p>The TSEL link field has two complementary uses; it is read to fetch a
+time-stamp event number for the TSE field, or if pointed to the .TIME field of
+another record the record's timestamp is copied directly from the target record.
+However with the latter usage if the TSEL link is itself read back instead of
+pointing to the .TIME field the link appears to have changed to point to the VAL
+field. This is due to an internal detail, and makes it impossible to save the
+TSEL field's value using autosave. This has been fixed, and now the TSEL field
+should always read back the same PV that it was pointed to.</p>
+
+<h3>dbLoadTemplate variable limits adjustable</h3>
+
+<p>The <tt>dbLoadTemplate</tt> command used to allocate a fixed amount of memory
+for the template macro values that it used to 5000 bytes, and also limited the
+number of variables that could defined to 100. These limits can now be changed
+at runtime using the variable <tt>dbTemplateMaxVars</tt> which sets the maximum
+number of macro variables that can be used; the amount of memory allocated for
+value storage is 50 times this number. This variable is registered as an iocsh
+variable in the base.dbd file, and can be adjusted as necessary before each
+individual call to <tt>dbLoadTemplate</tt>.</p>
+
+<p>The code now checks for and prevents any attempt to define more than the set
+number of variables, but it does not check for overruns of the storage buffer.
+This means that template files which define many long macro value strings could
+still cause a buffer overflow and crash the IOC at startup, but increasing the
+variable is all that is needed to allow that template file to be loaded.</p>
+
+<h3>Improvements to dbpf</h3>
+
+<p>It is now possible to use the <tt>dbpf</tt> command to put a long string
+value into a UCHAR array field, previously only CHAR arrays were supported by
+this command even though through Channel Access could put a long string to
+either type. The error message printed by <tt>dbpf</tt> when a value conversion
+fails has also been significantly improved.</p>
+
+<h3>Support for VxWorks 6.9</h3>
+
+<p>Various changes have been made that were needed to allow Base to build and
+run properly on VxWorks 6.9.</p>
+
+<h3>Improvements to aToIPAddr()</h3>
+
+<p>The libCom routine aToIPAddr() and the vxWorks implementation of the
+associated hostToIPAddr() function have been modified to be able to look up
+hostnames that begin with one or more digits. The epicsSockResolveTest program
+was added to check this functionality.</p>
+
+<h4>Added osdFindSymbol for Windows</h4>
+
+<p>Dirk Zimoch implemented the epicsLoadLibrary(), epicsLoadError() and
+epicsFindSymbol() routines for Windows OS targets.</p>
+
+<h4>More dbStatic commands accept "" or "*" to mean 'all'</h4>
+
+<p>The IOC commands dbDumpRecordType, dbDumpMenu and dbDumpRecord will now
+accept either an empty string or any string beginning with an asterisk '*' to
+mean all record types or menus.  Previously the 'all' option for these commands
+required passing in a NULL value, which could be done from the vxWorks shell but
+was not possible from iocsh.</p>
+
+<h4>VxWorks sysAtReboot Registration</h4>
+
+<p>The increasing intelligence of the GNU compiler and linker broke the method
+that was being used by the VxWorks code to register a reboot hook that can close
+down TCP connections nicely before the network stack gets disabled. This has
+been fixed and no longer uses a C++ static contructor to execute that code.</p>
+
+<h4>IOCS_APPL_TOP and INSTALL_LOCATION</h4>
+
+<p>An IOC application that sets INSTALL_LOCATION in its configure/CONFIG_SITE
+file no longer has to set IOCS_APPL_TOP there as well, unless the IOC uses a
+different path than the build host to reach the application's top directory in
+its filesystem. The IOCS_APPL_TOP variable now defaults to the value of
+INSTALL_LOCATION, so setting the latter automatically sets the former. This
+change fixes <a href="https://bugs.launchpad.net/bugs/1165257">Launchpad bug
+1165257</a>.</p>
+
+<h4>devLibVME.h</h4>
+
+<p>Moved the declaration of bcopyLongs() from this header into RTEMS/osdVME.h.
+Its original location broke the build for vxWorks 6.9 (the int nlongs argument
+becomes size_t in 6.9, thus conflicting with this declaration). The only local
+implementation of this routine is found in RTEMS/devLibVMEOSD.c, but it is not
+used anywhere in Base.</p>
+
+<h4>Allow empty database files</h4>
+
+<p>The IOC used to report an error if dbLoadRecords or dbLoadDatabase was asked
+to load an empty file or one containing just whitespace and/or comments. Such
+files are now permitted, simplifying the task of automated database generation
+programs which might discover they have nothing to output.</p>
+
+<h4>High-Resolution Time Provider on MacOS</h4>
+
+<p>MacOS does not provide the clock_gettime() API with CLOCK_REALTIME that other
+Posix systems implement, so we previously used gettimeofday() to fetch the
+current date & time from the OS. That older routine only provides the time with
+a resolution of 1 microsecond though, whereas clock_gettime() gives results with
+a nanosecond resolution.  This release uses a new MachTime time provider on
+MacOS which uses the Mach Kernel's CALENDAR_CLOCK service to fetch the time, and
+provides nanosecond resolution.</p>
+
+<h4>Time drift in periodic scans</h4>
+
+<p>The implementation of the periodic scan code has been modified to remove
+long-term drift associated with OS thread sheduling. The new code keeps scan
+times much more closely tied to the system clock tick, only allowing the scan
+period to drift if the record processing time takes longer to execute than the
+interval between scans. If this happens the scan thread is made to wait for an
+additional half-period but at most 1 second before the records are scanned
+again, to allow lower priority threads some time to process on a preemptive
+priority scheduled OS. After 10 repeated over-runs a warning will be logged,
+with an increasing delay between messages up to hourly.</p>
+
+<p>This fixes <a href="https://bugs.launchpad.net/bugs/597054">launchpad bug
+597054</a>.</p>
+
+<h2 align="center">Changes between 3.14.12.2 and 3.14.12.3</h2>
+
 <h4>Hex literals in CALC expressions</h4>
 
 <p>In previous releases, CALC expressions could contain hexadecimal literal

src/RTEMS/base/rtems_config.c

@@ -63,7 +63,7 @@ rtems_task Init (rtems_task_argument argument);
  * appropriate conditionals to use.
  * The new general time support makes including the RTC driverr less important.
  */
-#if !defined(mpc604) && !defined(__mc68040__) && !defined(__mcf5200__) && !defined(mpc7455) && !defined(__arm__)  /* don't have RTC code */
+#if !defined(mpc604) && !defined(__mc68040__) && !defined(__mcf5200__) && !defined(mpc7455) && !defined(__arm__)  && !defined(__nios2__)/* don't have RTC code */
 #define CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER
 #endif
 

src/RTEMS/base/rtems_init.c

@@ -279,11 +279,45 @@ initialize_remote_filesystem(char **argv, int hasLocalFilesystem)
             LogFatal("\"%s\" is not a valid command pathname.\n", rtems_bsdnet_bootp_cmdline);
         cp = mustMalloc(l + 20, "NFS mount paths");
         server_path = cp;
+        server_name = rtems_bsdnet_bootp_server_name;
         if (rtems_bsdnet_bootp_cmdline[0] == '/') {
             mount_point = server_path;
             strncpy(mount_point, rtems_bsdnet_bootp_cmdline, l);
             mount_point[l] = '\0';
             argv[1] = rtems_bsdnet_bootp_cmdline;
+            /*
+             * Its probably common to embed the mount point in the server 
+             * name so, when this is occurring, dont clobber the mount point
+             * by appending the first node from the command path. This allows
+             * the mount point to be a different path then the server's mount 
+             * path.
+             *
+             * This allows for example a line similar to as follows the DHCP 
+             * configuration file.
+             *
+             * server-name "159.233@192.168.0.123:/vol/vol0/bootRTEMS";
+             */
+            if ( server_name ) {
+                const size_t allocSize = strlen ( server_name ) + 2;
+                char * const pServerName = mustMalloc( allocSize, 
+                                                        "NFS mount paths");
+                char * const pServerPath = mustMalloc ( allocSize, 
+                                                        "NFS mount paths");
+                const int scanfStatus = sscanf ( 
+                                          server_name, 
+                                          "%[^:] : / %s",  
+                                          pServerName, 
+                                          pServerPath + 1u );
+                if ( scanfStatus ==  2 ) {
+                    pServerPath[0u]= '/';
+                    server_name = pServerName;
+                    server_path = pServerPath;
+                }
+                else {
+                    free ( pServerName );
+                    free ( pServerPath );
+                }
+            }
         }
         else {
             char *abspath = mustMalloc(strlen(rtems_bsdnet_bootp_cmdline)+2,"Absolute command path");
@@ -296,7 +330,6 @@ initialize_remote_filesystem(char **argv, int hasLocalFilesystem)
             strcat(abspath, rtems_bsdnet_bootp_cmdline);
             argv[1] = abspath;
         }
-        server_name = rtems_bsdnet_bootp_server_name;
     }
     nfsMount(server_name, server_path, mount_point);
 #endif

src/as/asHost.rc

@@ -1,4 +1,4 @@
-#include <Winver.h>
+#include <winver.h>
 #include "epicsVersion.h"
 
 VS_VERSION_INFO VERSIONINFO

src/as/asIoc.rc

@@ -1,4 +1,4 @@
-#include <Winver.h>
+#include <winver.h>
 #include "epicsVersion.h"
 
 VS_VERSION_INFO VERSIONINFO

src/as/asLib.h

@@ -30,25 +30,38 @@ typedef enum{
 } asClientStatus;
 
 typedef void (*ASCLIENTCALLBACK) (ASCLIENTPVT,asClientStatus);
+
 /* The following  routines are macros with the following syntax
 long asCheckGet(ASCLIENTPVT asClientPvt);
 long asCheckPut(ASCLIENTPVT asClientPvt);
 */
-#define asCheckGet(asClientPvt)\
-	(asActive \
-	? ((asClientPvt)->access>=asREAD ? TRUE : FALSE)\
-	: TRUE)
-#define asCheckPut(asClientPvt)\
-	(asActive \
-	? ((asClientPvt)->access>=asWRITE ? TRUE : FALSE)\
-	: TRUE)
-#define asTrapWriteBefore(asClientPvt,user,host,addr) \
-    (((asActive) && (asClientPvt)->trapMask) \
-    ? asTrapWriteBeforeWrite((user),(host),(addr)) \
-    : 0)
+#define asCheckGet(asClientPvt) \
+    (!asActive || ((asClientPvt)->access >= asREAD))
+#define asCheckPut(asClientPvt) \
+    (!asActive || ((asClientPvt)->access >= asWRITE))
+
+/* More convenience macros
+void *asTrapWriteWithData(ASCLIENTPVT asClientPvt,
+     const char *userid, const char *hostid, void *addr,
+     int dbrType, int no_elements, void *data);
+void asTrapWriteAfter(ASCLIENTPVT asClientPvt);
+*/
+#define asTrapWriteWithData(asClientPvt, user, host, addr, type, count, data) \
+    ((asActive && (asClientPvt)->trapMask) \
+    ? asTrapWriteBeforeWithData((user), (host), (addr), (type), (count), (data)) \
+    : 0)
+#define asTrapWriteAfter(pvt) \
+    if (pvt) asTrapWriteAfterWrite(pvt)
+
+/* This macro is for backwards compatibility, upgrade any code
+   calling it to use asTrapWriteWithData() instead ASAP:
+void *asTrapWriteBefore(ASCLIENTPVT asClientPvt,
+     const char *userid, const char *hostid, void *addr);
+*/
+#define asTrapWriteBefore(asClientPvt, user, host, addr) \
+    asTrapWriteWithData(asClientPvt, user, host, addr, 0, 0, NULL)
+
 
-#define asTrapWriteAfter(pvt) if((pvt)) asTrapWriteAfterWrite((pvt))
-
 epicsShareFunc long epicsShareAPI asInitialize(ASINPUTFUNCPTR inputfunction);
 epicsShareFunc long epicsShareAPI asInitFile(
     const char *filename,const char *substitutions);
@@ -100,8 +113,9 @@ epicsShareFunc int epicsShareAPI asDumpMemFP(FILE *fp,const char *asgname,
 epicsShareFunc int epicsShareAPI asDumpHash(void);
 epicsShareFunc int epicsShareAPI asDumpHashFP(FILE *fp);
 
-epicsShareFunc void * epicsShareAPI asTrapWriteBeforeWrite(
-    const char *userid,const char *hostid,void *addr);
+epicsShareFunc void * epicsShareAPI asTrapWriteBeforeWithData(
+    const char *userid, const char *hostid, void *addr,
+    int dbrType, int no_elements, void *data);
 
 epicsShareFunc void epicsShareAPI asTrapWriteAfterWrite(void *pvt);
 

src/as/asTrapWrite.c

@@ -3,8 +3,7 @@
 *     National Laboratory.
 * Copyright (c) 2002 The Regents of the University of California, as
 *     Operator of Los Alamos National Laboratory.
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 /*asTrapWrite.c */
@@ -100,47 +99,53 @@ void epicsShareAPI asTrapWriteUnregisterListener(asTrapWriteId id)
                  = (listenerPvt *)ellNext(&plistenerPvt->node);
             if(plistenerPvt->plistener == plistener) {
                 ellDelete(&pwriteMessage->listenerPvtList,&plistenerPvt->node);
-                freeListFree(pasTrapWritePvt->freeListListenerPvt,(void *)plistenerPvt);
+                freeListFree(pasTrapWritePvt->freeListListenerPvt, plistenerPvt);
             }
             plistenerPvt = pnext;
         }
         pwriteMessage = (writeMessage *)ellNext(&pwriteMessage->node);
     }
     ellDelete(&pasTrapWritePvt->listenerList,&plistener->node);
-    free((void *)plistener);
+    free(plistener);
     epicsMutexUnlock(pasTrapWritePvt->lock);
 }
 
-void * epicsShareAPI asTrapWriteBeforeWrite(
-    const char *userid,const char *hostid,void *addr)
+void * epicsShareAPI asTrapWriteBeforeWithData(
+    const char *userid, const char *hostid, void *addr,
+    int dbrType, int no_elements, void *data)
 {
     writeMessage *pwriteMessage;
     listener *plistener;
-    listenerPvt *plistenerPvt;
 
-    if(pasTrapWritePvt==0) return(0);
-    if(ellCount(&pasTrapWritePvt->listenerList)<=0) return 0;
+    if (pasTrapWritePvt == 0 ||
+        ellCount(&pasTrapWritePvt->listenerList) <= 0) return 0;
+
     pwriteMessage = (writeMessage *)freeListCalloc(
         pasTrapWritePvt->freeListWriteMessage);
     pwriteMessage->message.userid = userid;
     pwriteMessage->message.hostid = hostid;
     pwriteMessage->message.serverSpecific = addr;
+    pwriteMessage->message.dbrType = dbrType;
+    pwriteMessage->message.no_elements = no_elements;
+    pwriteMessage->message.data = data;
     ellInit(&pwriteMessage->listenerPvtList);
+
     epicsMutexMustLock(pasTrapWritePvt->lock);
-    ellAdd(&pasTrapWritePvt->writeMessageList,&pwriteMessage->node);
+    ellAdd(&pasTrapWritePvt->writeMessageList, &pwriteMessage->node);
     plistener = (listener *)ellFirst(&pasTrapWritePvt->listenerList);
-    while(plistener) {
-        plistenerPvt = (listenerPvt *)freeListCalloc(
+    while (plistener) {
+        listenerPvt *plistenerPvt = (listenerPvt *)freeListCalloc(
             pasTrapWritePvt->freeListListenerPvt);
+
         plistenerPvt->plistener = plistener;
         pwriteMessage->message.userPvt = 0;
-        (*plistener->func)(&pwriteMessage->message,0);
+        plistener->func(&pwriteMessage->message, 0);
         plistenerPvt->userPvt = pwriteMessage->message.userPvt;
-        ellAdd(&pwriteMessage->listenerPvtList,&plistenerPvt->node);
+        ellAdd(&pwriteMessage->listenerPvtList, &plistenerPvt->node);
         plistener = (listener *)ellNext(&plistener->node);
     }
     epicsMutexUnlock(pasTrapWritePvt->lock);
-    return((void *)pwriteMessage);
+    return pwriteMessage;
 }
 
 void epicsShareAPI asTrapWriteAfterWrite(void *pvt)
@@ -148,20 +153,22 @@ void epicsShareAPI asTrapWriteAfterWrite(void *pvt)
     writeMessage *pwriteMessage = (writeMessage *)pvt;
     listenerPvt *plistenerPvt;
 
-    if(pwriteMessage==0 || pasTrapWritePvt==0) return;
+    if (pwriteMessage == 0 ||
+        pasTrapWritePvt == 0) return;
+
     epicsMutexMustLock(pasTrapWritePvt->lock);
     plistenerPvt = (listenerPvt *)ellFirst(&pwriteMessage->listenerPvtList);
-    while(plistenerPvt) {
+    while (plistenerPvt) {
         listenerPvt *pnext = (listenerPvt *)ellNext(&plistenerPvt->node);
-        listener *plistener;
-        plistener = plistenerPvt->plistener;
+        listener *plistener = plistenerPvt->plistener;
+
         pwriteMessage->message.userPvt = plistenerPvt->userPvt;
-        (*plistener->func)(&pwriteMessage->message,1);
-        ellDelete(&pwriteMessage->listenerPvtList,&plistenerPvt->node);
-        freeListFree(pasTrapWritePvt->freeListListenerPvt,(void *)plistenerPvt);
+        plistener->func(&pwriteMessage->message, 1);
+        ellDelete(&pwriteMessage->listenerPvtList, &plistenerPvt->node);
+        freeListFree(pasTrapWritePvt->freeListListenerPvt, plistenerPvt);
         plistenerPvt = pnext;
     }
-    ellDelete(&pasTrapWritePvt->writeMessageList,&pwriteMessage->node);
-    freeListFree(pasTrapWritePvt->freeListWriteMessage,(void *)pwriteMessage);
+    ellDelete(&pasTrapWritePvt->writeMessageList, &pwriteMessage->node);
+    freeListFree(pasTrapWritePvt->freeListWriteMessage, pwriteMessage);
     epicsMutexUnlock(pasTrapWritePvt->lock);
 }

src/as/asTrapWrite.h

@@ -3,9 +3,8 @@
 *     National Laboratory.
 * Copyright (c) 2002 The Regents of the University of California, as
 *     Operator of Los Alamos National Laboratory.
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
-* in file LICENSE that is included with this distribution. 
+* EPICS BASE is distributed subject to a Software License Agreement found
+* in file LICENSE that is included with this distribution.
 \*************************************************************************/
 /*asTrapWrite.h*/
 /* Author:  Marty Kraimer Date:    07NOV2000 */
@@ -24,6 +23,9 @@ typedef struct asTrapWriteMessage {
     const char *hostid;
     void *serverSpecific;
     void *userPvt;
+    int dbrType;    /* Data type from ca/db_access.h, NOT dbFldTypes.h */
+    int no_elements;
+    void *data;     /* Might be NULL if no data is available */
 } asTrapWriteMessage;
 
 

src/ca/CASG.cpp

@@ -25,8 +25,6 @@
 #include "cac.h"
 #include "sgAutoPtr.h"
 
-casgRecycle::~casgRecycle () {}
-
 CASG::CASG ( epicsGuard < epicsMutex > & guard, ca_client_context & cacIn ) :
     client ( cacIn ), magic ( CASG_MAGIC )
 {
@@ -38,12 +36,13 @@ CASG::~CASG ()
 }
 
 void CASG::destructor ( 
+    CallbackGuard & cbGuard,
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
 
     if ( this->verify ( guard ) ) {
-        this->reset ( guard );
+        this->reset ( cbGuard, guard );
         this->client.uninstallCASG ( guard, *this );
         this->magic = 0;
     }
@@ -127,36 +126,37 @@ int CASG::block (
         delay = cur_time - beg_time;
     }
 
-    this->reset ( guard );
-
     return status;
 }
 
 void CASG::reset ( 
+    CallbackGuard & cbGuard,
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
-    this->destroyCompletedIO ( guard );
-    this->destroyPendingIO ( guard );
+    this->destroyCompletedIO ( cbGuard, guard );
+    this->destroyPendingIO ( cbGuard, guard );
 }
 
 // lock must be applied
 void CASG::destroyCompletedIO ( 
+    CallbackGuard & cbGuard,
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
     syncGroupNotify * pNotify;
     while ( ( pNotify = this->ioCompletedList.get () ) ) {
-        pNotify->destroy ( guard, * this );
+        pNotify->destroy ( cbGuard, guard );
     }
 }
 
 void CASG::destroyPendingIO ( 
+    CallbackGuard & cbGuard,
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
     while ( syncGroupNotify * pNotify = this->ioPendingList.first () ) {
-        pNotify->cancel ( guard );
+        pNotify->cancel ( cbGuard, guard );
         // cancel must release the guard while 
         // canceling put callbacks so we
         // must double check list membership
@@ -166,7 +166,7 @@ void CASG::destroyPendingIO (
         else {
             this->ioCompletedList.remove ( *pNotify );
         }
-        pNotify->destroy ( guard, *this );
+        pNotify->destroy ( cbGuard, guard );
     }
 }
 
@@ -201,10 +201,11 @@ void CASG::show (
 }
 
 bool CASG::ioComplete (
+    CallbackGuard & cbGuard,
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
-    this->destroyCompletedIO ( guard );
+    this->destroyCompletedIO ( cbGuard, guard );
     return this->ioPendingList.count () == 0u;
 }
 
@@ -212,9 +213,9 @@ void CASG::put ( epicsGuard < epicsMutex > & guard, chid pChan,
     unsigned type, arrayElementCount count, const void * pValue )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
-    sgAutoPtr < syncGroupWriteNotify > pNotify ( guard, *this, this->ioPendingList );
+    sgAutoPtr < syncGroupWriteNotify > pNotify ( guard, *this );
     pNotify = syncGroupWriteNotify::factory ( 
-        this->freeListWriteOP, *this, pChan );
+        this->freeListWriteOP, *this, & CASG :: recycleWriteNotifyIO, pChan );
     pNotify->begin ( guard, type, count, pValue );
     pNotify.release ();
 }
@@ -223,9 +224,9 @@ void CASG::get ( epicsGuard < epicsMutex > & guard, chid pChan,
                 unsigned type, arrayElementCount count, void *pValue )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
-    sgAutoPtr < syncGroupReadNotify > pNotify ( guard, *this, this->ioPendingList );
+    sgAutoPtr < syncGroupReadNotify > pNotify ( guard, *this );
     pNotify = syncGroupReadNotify::factory ( 
-        this->freeListReadOP, *this, pChan, pValue );
+        this->freeListReadOP, *this, & CASG :: recycleReadNotifyIO, pChan, pValue );
     pNotify->begin ( guard, type, count );
     pNotify.release ();
 }
@@ -241,20 +242,20 @@ void CASG::completionNotify (
     }
 }
 
-void CASG::recycleSyncGroupWriteNotify ( 
-    epicsGuard < epicsMutex > & guard, syncGroupWriteNotify & io )
-{
-    guard.assertIdenticalMutex ( this->client.mutexRef() );
-    this->freeListWriteOP.release ( & io );
-}
-
-void CASG::recycleSyncGroupReadNotify ( 
-    epicsGuard < epicsMutex > & guard, syncGroupReadNotify & io )
+void CASG :: recycleReadNotifyIO ( epicsGuard < epicsMutex > & guard, 
+                            syncGroupReadNotify & io )
 {
     guard.assertIdenticalMutex ( this->client.mutexRef() );
     this->freeListReadOP.release ( & io );
 }
 
+void CASG :: recycleWriteNotifyIO ( epicsGuard < epicsMutex > & guard, 
+                            syncGroupWriteNotify & io )
+{
+    guard.assertIdenticalMutex ( this->client.mutexRef() );
+    this->freeListWriteOP.release ( & io );
+}
+
 int CASG :: printFormated ( const char *pformat, ... )
 {
     va_list theArgs;
@@ -295,13 +296,6 @@ void CASG::exception (
     }
 }
 
-void * CASG::operator new ( size_t ) // X aCC 361
-{
-    // The HPUX compiler seems to require this even though no code
-    // calls it directly
-    throw std::logic_error ( "why is the compiler calling private operator new" );
-}
-
 void CASG::operator delete ( void * )
 {
     // Visual C++ .net appears to require operator delete if