Set SNAPSHOT for R3.14.12.5

Also makes ROFF fields unsigned, needed for ROFF=0x80000000

.bzrignore

@@ -6,3 +6,4 @@
 ./include
 ./templates
 **/O.*
+./QtC-*

configure/CONFIG

@@ -1,34 +1,30 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2013 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
 #
 #  $Revision-Id$
-#
-#  The developer may edit this file.
-# assume T_A is the host arch if not specified
 
 #
 #  Common build definitions
 #
 
 ifneq ($(wildcard $(TOP)/configure/CONFIG_BASE_VERSION),)
-EPICS_BASE = $(INSTALL_LOCATION)
-CONFIG = $(TOP)/configure
-BASE_TOP=YES
+  EPICS_BASE = $(INSTALL_LOCATION)
+  CONFIG = $(TOP)/configure
+  BASE_TOP=YES
 else
-CONFIG ?= $(EPICS_BASE)/configure
+  CONFIG ?= $(EPICS_BASE)/configure
 endif
 
 # Provide a default if the user hasn't set EPICS_HOST_ARCH
 ifeq ($(origin EPICS_HOST_ARCH), undefined)
-# NB: Must use a simply expanded variable here for performance:
-EPICS_HOST_ARCH := $(shell $(CONFIG)/../startup/EpicsHostArch.pl)
+  # NB: We use a simply expanded variable here for performance:
+  EPICS_HOST_ARCH := $(shell $(CONFIG)/../startup/EpicsHostArch.pl)
 endif
 #
 
@@ -38,8 +34,8 @@ endif
 -include $(CONFIG)/RELEASE.$(EPICS_HOST_ARCH)
 -include $(CONFIG)/RELEASE.$(EPICS_HOST_ARCH).Common
 ifdef T_A
--include $(CONFIG)/RELEASE.Common.$(T_A)
--include $(CONFIG)/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+  -include $(CONFIG)/RELEASE.Common.$(T_A)
+  -include $(CONFIG)/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
 endif
 
 include $(CONFIG)/CONFIG_COMMON
@@ -62,52 +58,56 @@ include $(CONFIG)/CONFIG_BASE_VERSION
 include $(CONFIG)/os/CONFIG.$(EPICS_HOST_ARCH).Common
 -include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
 
+RELEASE_TOPS := $(shell $(CONVERTRELEASE) -T $(TOP) releaseTops)
+
+
 ifdef T_A
 
-#  Cross compile specific definitions
-#
-ifneq ($(EPICS_HOST_ARCH),$(T_A))
-include $(CONFIG)/CONFIG.CrossCommon
-endif
+  #  Cross compile specific definitions
+  #
+  ifneq ($(EPICS_HOST_ARCH),$(T_A))
+    include $(CONFIG)/CONFIG.CrossCommon
+  endif
 
-#  Target architecture specific definitions
-#
--include $(CONFIG)/os/CONFIG.Common.$(T_A)
+  #  Target architecture specific definitions
+  #
+  -include $(CONFIG)/os/CONFIG.Common.$(T_A)
 
-#  Host-Target architecture specific definitions
-#
--include $(CONFIG)/os/CONFIG.$(EPICS_HOST_ARCH).$(T_A)
+  #  Host-Target architecture specific definitions
+  #
+  -include $(CONFIG)/os/CONFIG.$(EPICS_HOST_ARCH).$(T_A)
 
-#  RELEASE file specific definitions
-#
-ifneq ($(CONFIG),$(TOP)/configure)
--include $(CONFIG)/CONFIG_APP_INCLUDE
-endif
+  #  RELEASE file specific definitions
+  #
+  ifneq ($(CONFIG),$(TOP)/configure)
+    -include $(CONFIG)/CONFIG_APP_INCLUDE
+  endif
 
-#  Site specific target and host-target definitions
-#
--include $(CONFIG)/os/CONFIG_SITE.Common.$(T_A)
--include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+  #  Site specific target and host-target definitions
+  #
+  -include $(CONFIG)/os/CONFIG_SITE.Common.$(T_A)
+  -include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+
+endif # ifdef T_A
 
-endif
 
 # Include <top>/cfg/CONFIG* definitions from tops defined in RELEASE* files
 #
 ifneq ($(CONFIG),$(TOP)/configure)
-RELEASE_TOPS := $(shell $(CONVERTRELEASE) -T $(TOP) releaseTops)
-RELEASE_CFG_CONFIGS = $(foreach top, $(RELEASE_TOPS), $(wildcard $($(top))/cfg/CONFIG*))
-ifneq ($(RELEASE_CFG_CONFIGS),)
-include $(RELEASE_CFG_CONFIGS)
-endif
+  RELEASE_TOPS_REVERSE := $(shell \
+      $(PERL) -e '$$,=" ";print reverse @ARGV' $(RELEASE_TOPS))
+  RELEASE_CFG_CONFIGS = $(foreach top, $(RELEASE_TOPS_REVERSE), \
+      $(wildcard $($(top))/cfg/CONFIG*))
+  ifneq ($(RELEASE_CFG_CONFIGS),)
+    include $(RELEASE_CFG_CONFIGS)
+  endif
 endif
 
 # Include $(INSTALL_CFG)/CONFIG* definitions
 #
-ifndef T_A
 TOP_CFG_CONFIGS = $(wildcard $(INSTALL_CFG)/CONFIG*)
 ifneq ($(TOP_CFG_CONFIGS),)
-include $(TOP_CFG_CONFIGS)
-endif
+  include $(TOP_CFG_CONFIGS)
 endif
 
 #  User specific definitions
@@ -115,26 +115,7 @@ endif
 -include $(HOME)/configure/CONFIG_USER
 -include $(HOME)/configure/CONFIG_USER.$(EPICS_HOST_ARCH)
 ifdef T_A
--include $(HOME)/configure/CONFIG_USER.Common.$(T_A)
--include $(HOME)/configure/CONFIG_USER.$(EPICS_HOST_ARCH).$(T_A)
+  -include $(HOME)/configure/CONFIG_USER.Common.$(T_A)
+  -include $(HOME)/configure/CONFIG_USER.$(EPICS_HOST_ARCH).$(T_A)
 endif
 
-#  All options
-#   may be overridden here.
-#
-# EXAMPLES
-# --------
-#  Build client objects statically ?  must be either YES or NO
-#STATIC_BUILD=NO
-#  Host build optimization,   must be either YES or NO
-#HOST_OPT=YES
-#  Cross build optimization,  must be either YES or NO
-#CROSS_OPT=YES
-#  Generate Verbose Compiler Warnings for host build,  must be either YES or NO
-#HOST_WARN=YES
-#  Generate Verbose Compiler Warnings for cross compile builds,  must be either YES or NO
-#CROSS_WARN=YES
-#etc.
-
-#CROSS_COMPILER_TARGET_ARCHS=vxWorks-68040
-

configure/CONFIG_ADDONS

@@ -26,7 +26,6 @@
 #    USR_CFLAGS    C flags
 #    USR_CXXFLAGS  C++ flags
 #    USR_CPPFLAGS  c preprocesser flags
-#    INC           include-files to install
 #    SRCS          source files for building libraries and prods
 #    USR_SRCS      source files for building libraries and prods
 #    PROD_SRCS     source files for building prods
@@ -376,17 +375,6 @@ USR_LIBS += $(USR_LIBS_DEFAULT)
 endif
 endif
 
-#
-#	concat specific include files
-#
-ifneq ($(strip $(INC_$(OS_CLASS))),)
-INC += $(subst -nil-,,$(INC_$(OS_CLASS)))
-else
-ifdef INC_DEFAULT
-INC+=$(INC_DEFAULT)
-endif
-endif
-
 #
 #	concat specific library contents (if defined) to SYS_PROD_LIBS
 #

configure/CONFIG_APP_INCLUDE

@@ -1,24 +1,34 @@
-export TOP
-export IOCAPPS
+#*************************************************************************
+# Copyright (c) 2013 UChicago Argonne LLC, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in the file LICENSE that is included with this distribution.
+#*************************************************************************
+#
+#  $Revision-Id$
+#
 
-RELEASE_TOPS := $(shell $(CONVERTRELEASE) -T $(TOP) releaseTops)
+export TOP
 
 ifneq ($(RELEASE_TOPS),)
 
 define  RELEASE_FLAGS_template
   export $(1)
-  $(1)_HOST_BIN = $$(strip $$($(1)))/bin/$$(EPICS_HOST_ARCH)
-  $(1)_HOST_LIB = $$(strip $$($(1)))/lib/$$(EPICS_HOST_ARCH)
-  $(1)_BIN = $$(wildcard $$(strip $$($(1)))/bin/$$(T_A))
-  $(1)_LIB = $$(wildcard $$(strip $$($(1)))/lib/$$(T_A))
+  $(1)_HOST_BIN = $$(strip $$($(1)))/bin/$(EPICS_HOST_ARCH)
+  $(1)_HOST_LIB = $$(strip $$($(1)))/lib/$(EPICS_HOST_ARCH)
+  $(1)_BIN = $$(wildcard $$(strip $$($(1)))/bin/$(T_A))
+  $(1)_LIB = $$(wildcard $$(strip $$($(1)))/lib/$(T_A))
   SHRLIB_SEARCH_DIRS += $$($(1)_LIB)
-  RELEASE_INCLUDES += $$(addprefix -I,$$(wildcard $$(strip $$($(1)))/include/os/$$(OS_CLASS)))
+  RELEASE_INCLUDES += $$(addprefix -I,$$(wildcard $$(strip $$($(1)))/include/os/$(OS_CLASS)))
   RELEASE_INCLUDES += $$(addprefix -I,$$(wildcard $$(strip $$($(1)))/include))
   RELEASE_DBD_DIRS += $$(wildcard $$(strip $$($(1)))/dbd)
   RELEASE_DB_DIRS += $$(wildcard $$(strip $$($(1)))/db)
-  RELEASE_PERL_MODULE_DIRS += $$(wildcard $$($(1)_LIB)/perl)
+  RELEASE_PERL_MODULE_DIRS += $$(wildcard $$(strip $$($(1)))/lib/perl)
 endef
-$(foreach top, $(RELEASE_TOPS), $(eval $(call RELEASE_FLAGS_template,$(top)) ))
+$(foreach top, $(RELEASE_TOPS), \
+    $(eval $(call RELEASE_FLAGS_template,$(top))))
 
 endif
 

configure/CONFIG_BASE

@@ -54,6 +54,7 @@ BASE_CPPFLAGS += $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))
 # Where to find the installed build tools
 
 TOOLS = $(EPICS_BASE_HOST_BIN)
+FIND_TOOL = $(firstword $(wildcard $(TOOLS)/$(1) $(TOP)/src/tools/$(1)))
 
 #---------------------------------------------------------------
 # Epics base build tools and tool flags
@@ -63,7 +64,8 @@ DBEXPAND                   = $(call PATH_FILTER, $(TOOLS)/dbExpand$(HOSTEXE))
 DBTORECORDTYPEH            = $(call PATH_FILTER, $(TOOLS)/dbToRecordtypeH$(HOSTEXE))
 DBTOMENUH                  = $(call PATH_FILTER, $(TOOLS)/dbToMenuH$(HOSTEXE))
 REGISTERRECORDDEVICEDRIVER = $(PERL) $(TOOLS)/registerRecordDeviceDriver.pl
-CONVERTRELEASE=$(PERL) $(TOOLS)/convertRelease.pl
+CONVERTRELEASE             = $(PERL) $(call FIND_TOOL,convertRelease.pl)
+FULLPATHNAME               = $(PERL) $(TOOLS)/fullPathName.pl
 
 #-------------------------------------------------------
 # tools for installing libraries and products

configure/CONFIG_BASE_VERSION

@@ -30,7 +30,7 @@ EPICS_MODIFICATION = 12
 
 # EPICS_PATCH_LEVEL must be a number  (win32 resource file requirement)
 # Not included if zero
-EPICS_PATCH_LEVEL = 3
+EPICS_PATCH_LEVEL = 5
 
 # This will end in -DEV between official releases
 #EPICS_DEV_SNAPSHOT=-DEV
@@ -38,11 +38,11 @@ EPICS_PATCH_LEVEL = 3
 #EPICS_DEV_SNAPSHOT=-pre1-DEV
 #EPICS_DEV_SNAPSHOT=-pre2
 #EPICS_DEV_SNAPSHOT=-pre2-DEV
-EPICS_DEV_SNAPSHOT=-rc1
+#EPICS_DEV_SNAPSHOT=-rc1
 #EPICS_DEV_SNAPSHOT=-rc1-DEV
 #EPICS_DEV_SNAPSHOT=-rc2
 #EPICS_DEV_SNAPSHOT=-rc2-DEV
-#EPICS_DEV_SNAPSHOT=
+EPICS_DEV_SNAPSHOT=
 
 # No changes should be needed below here
 

configure/CONFIG_COMMON

@@ -76,9 +76,12 @@ INSTALL_DB                  = $(INSTALL_LOCATION)/db
 INSTALL_CONFIG              = $(INSTALL_LOCATION)/configure
 INSTALL_JAVA                = $(INSTALL_LOCATION)/javalib
 
-#Directory for OS independant build created files
+# Directory for OS independant build created files
 COMMON_DIR = ../O.Common
 
+# IOC's absolute path to $(TOP), may be overridden inside the application
+IOCS_APPL_TOP               = $(shell $(FULLPATHNAME) $(INSTALL_LOCATION))
+
 #-------------------------------------------------------
 # Make echo output - suppress echoing if make's '-s' flag is set
 NOP = :
@@ -206,6 +209,16 @@ USR_CPPFLAGS =
 USR_DBDFLAGS =
 USR_ARFLAGS =
 
+# Variables to be set only on the command-line:
+# CMD_INCLUDES =
+# CMD_CFLAGS =
+# CMD_CXXFLAGS =
+# CMD_LDFLAGS =
+# CMD_CPPFLAGS =
+# CMD_DBFLAGS =
+# CMD_DBDFLAGS =
+# CMD_ARFLAGS =
+
 # Debug specific options
 DEBUG_CPPFLAGS =
 DEBUG_CFLAGS =
@@ -264,32 +277,35 @@ RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(COMMANDLINE_LIBRARY))
 # Flags
 
 INCLUDES = -I. $(SRC_INCLUDES) $(INSTALL_INCLUDES) $(RELEASE_INCLUDES)\
- $(TARGET_INCLUDES) $(USR_INCLUDES) $(OP_SYS_INCLUDES) $($(BUILD_CLASS)_INCLUDES)
+ $(TARGET_INCLUDES) $(USR_INCLUDES) $(CMD_INCLUDES) $(OP_SYS_INCLUDES)\
+ $($(BUILD_CLASS)_INCLUDES)
 
-CFLAGS = $($(BUILD_CLASS)_CFLAGS) $(POSIX_CFLAGS) $(OPT_CFLAGS) $(DEBUG_CFLAGS)\
- $(PIPE_CFLAGS) $(WARN_CFLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS)\
- $(CODE_CFLAGS) $(STATIC_CFLAGS) $(OP_SYS_CFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
+CFLAGS = $($(BUILD_CLASS)_CFLAGS) $(POSIX_CFLAGS) $(OPT_CFLAGS)\
+ $(DEBUG_CFLAGS) $(PIPE_CFLAGS) $(WARN_CFLAGS) $(TARGET_CFLAGS)\
+ $(USR_CFLAGS) $(CMD_CFLAGS) $(ARCH_DEP_CFLAGS) $(CODE_CFLAGS)\
+ $(STATIC_CFLAGS) $(OP_SYS_CFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
 
-CXXFLAGS = $($(BUILD_CLASS)_CXXFLAGS) $(POSIX_CXXFLAGS) $(OPT_CXXFLAGS) $(DEBUG_CXXFLAGS)\
- $(PIPE_CFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS)\
- $(CODE_CXXFLAGS) $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
+CXXFLAGS = $($(BUILD_CLASS)_CXXFLAGS) $(POSIX_CXXFLAGS) $(OPT_CXXFLAGS)\
+ $(DEBUG_CXXFLAGS) $(PIPE_CFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS)\
+ $(USR_CXXFLAGS) $(CMD_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(CODE_CXXFLAGS)\
+ $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
 
-LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(POSIX_LDFLAGS) \
- $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(OP_SYS_LDFLAGS) $($(BUILD_CLASS)_LDFLAGS)\
- $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
+LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(CMD_LDFLAGS)\
+ $(POSIX_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(OP_SYS_LDFLAGS)\
+ $($(BUILD_CLASS)_LDFLAGS) $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
 
-LDLIBS = \
- $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS) $(GNU_LDLIBS_$(GNU))
+LDLIBS = $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS)\
+ $(GNU_LDLIBS_$(GNU))
 
-CPPFLAGS += $($(BUILD_CLASS)_CPPFLAGS) $(POSIX_CPPFLAGS)\
- $(OPT_CPPFLAGS) $(DEBUG_CPPFLAGS) $(WARN_CPPFLAGS)\
- $(BASE_CPPFLAGS) $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS)\
- $(OP_SYS_CPPFLAGS) $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
+CPPFLAGS = $($(BUILD_CLASS)_CPPFLAGS) $(POSIX_CPPFLAGS) $(OPT_CPPFLAGS)\
+ $(DEBUG_CPPFLAGS) $(WARN_CPPFLAGS) $(BASE_CPPFLAGS) $(TARGET_CPPFLAGS)\
+ $(USR_CPPFLAGS) $(CMD_CPPFLAGS) $(ARCH_DEP_CPPFLAGS) $(OP_SYS_CPPFLAGS)\
+ $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
 
 #--------------------------------------------------
 # ar definition default
 ARFLAGS =
-ARCMD = $(AR) $(ARFLAGS) $(USR_ARFLAGS) $@  $(LIBRARY_LD_OBJS)
+ARCMD = $(AR) $(ARFLAGS) $(USR_ARFLAGS) $(CMD_ARFLAGS) $@  $(LIBRARY_LD_OBJS)
 
 #--------------------------------------------------
 # 'Munch' link-edit
@@ -320,8 +336,7 @@ PREPROCESS.cpp = $(CPP) $(CPPFLAGS) $(INCLUDES) $< > $@
 HDEPENDS = YES
 HDEPENDS_METHOD = CMD
 
-HDEPENDS_INCLUDES = $(subst -I,,$(INCLUDES))
-HDEPENDSFLAGS = -m $*$(DEP) $(HDEPENDS_INCLUDES) $@ $<
+HDEPENDSFLAGS = -m $*$(DEP) $(INCLUDES) $@ $<
 HDEPENDSCMD = -$(MKMF) $(HDEPENDS_FLAGS) $(HDEPENDSFLAGS)
 
 HDEPENDS_CMD_NO = $(ECHO) ""
@@ -371,6 +386,7 @@ INSTALL_LIB_INSTALLS = $(addprefix $(INSTALL_LIB)/,$(notdir $(LIB_INSTALLS)))
 # Installed file permissions
 BIN_PERMISSIONS = 555
 LIB_PERMISSIONS = 444
+SHRLIB_PERMISSIONS = 555
 INSTALL_PERMISSIONS = 444
 
 #---------------------------------------------------------------

configure/CONFIG_FILE_TYPE

@@ -1,10 +1,10 @@
 #*************************************************************************
-# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2013 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution. 
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
 # $Revision-Id$
 #
@@ -12,7 +12,7 @@
 #
 
 # --------------------------------------------------------------
-# Module developers can now define a new type of file, e.g. ABC, 
+# Module developers can now define a new type of file, e.g. ABC,
 # so that files of type ABC will be installed into a directory
 # defined by INSTALL_ABC. This is done by creating a new CONFIG<name>
 # file, e.g. CONFIG_ABC, with the following lines:
@@ -24,8 +24,14 @@
 # $(INSTALL_LOCATION). The file type ABC should be target
 # architecture independent (alh files, medm files, edm files).
 #
-# Optional rules necessary for files of type ABC should be put in
-# a RULES_ABC file.
+# Files of type ABC are then installed into the INSTALL_ABC
+# directory by adding a line like the following to a Makefile.
+#
+#       ABC += <filename1> <filename2> <filename3>
+#
+# Rules necessary to create files of type ABC should be put in
+# a RULES_ABC file. Variables used by those rules should appear
+# in a CONFIG_ABC file.
 #
 # The module developer installs new CONFIG* or RULES* files
 # into the directory $(INSTALL_LOCATION)/cfg by including the 
@@ -33,16 +39,11 @@
 #
 #       CFG += CONFIG_ABC RULES_ABC
 # 
-# Files of type ABC are installed into INSTALL_ABC directory
-# by adding a line like the following to a Makefile.
-#
-#       ABC += <filename1> <filename2> <filename3>
-#
-# Files in $(INSTALL_LOCATION)/cfg directory are now included by
-# the base config files so the definitions and rules are available
-# for use by later src directory Makefiles in the same module or
-# by other modules with a RELEASE line pointing to the TOP of 
-# the module with RULES_ABC.
+# CONFIG and RULES files in the $(INSTALL_LOCATION)/cfg directory
+# are included by the Base config files so their definitions and
+# rules are available for use by later src directory Makefiles in
+# the same module, or by other modules with a RELEASE line that
+# points to the TOP of the module providing these files.
 
 FILE_TYPE += ADL
 INSTALL_ADL = $(INSTALL_LOCATION)/adl
@@ -59,6 +60,6 @@ INSTALL_EDL = $(INSTALL_LOCATION)/edl
 FILE_TYPE += PERL_MODULES
 INSTALL_PERL_MODULES = $(INSTALL_LOCATION_LIB)/perl
 
-INSTALLS_CFG= $(CFG:%= $(INSTALL_CFG)/%)
+INSTALLS_CFG = $(CFG:%= $(INSTALL_CFG)/%)
 DIRECTORY_TARGETS += $(foreach type, $(FILE_TYPE),$(INSTALL_$(type)))
 

configure/CONFIG_SITE

@@ -19,11 +19,13 @@
 #	aix-ppc                (IBM compiler used for host builds)
 #	aix-ppc-gnu            (GNU compiler used for host builds)
 #	cygwin-x86             (cygwin compiler used for host builds)
+#	cygwin-x86_64          (cygwin compiler used for host builds)
 #	darwin-ppc             (PowerPC based Apple running OSX)
 #	darwin-ppcx86          (Universal binaries for both CPUs)
 #	darwin-x86             (Intel based Apple running OSX)
 #	freebsd-x86            (GNU compiler used for host builds)
 #	freebsd-x86_64         (GNU compiler used for host builds)
+#	linux-arm              (GNU compiler used for host builds)
 #	linux-ppc              (GNU compiler used for host builds)
 #	linux-ppc64            (GNU compiler used for host builds)
 #	linux-x86              (GNU compiler used for host builds)
@@ -40,9 +42,13 @@
 #	win32-x86              (MS Visual C++ compiler used for host builds)
 #	win32-x86-cygwin       (WIN32 API with cygwin GNU compiler used for host builds)
 #	win32-x86-mingw        (MinGW compiler used for host builds)
+#	win32-x86-static       (MS Visual C++ compiler used for host builds)
 #	windows-x64            (MS Visual C++ compiler used for host builds)
+#	windows-x64-mingw      (MinGW compiler used for host builds)
+#	windows-x64-static     (MS Visual C++ compiler used for host builds)
 
-#  Debugging builds 
+#  Debugging builds:
+#	linux-arm-debug        (GNU compiler used for host builds)
 #	linux-x86-debug        (GNU compiler with -g option for host builds)
 #	linux-x86_64-debug     (GNU compiler with -g option for host builds)
 #	solaris-sparc-debug    (sun compiler no optimization,-g for debugging info)
@@ -59,13 +65,13 @@
 #
 #  Currently Supporting:
 
-#       ios-arm
-#       ios-386
+#       ios-arm                 (darwin-x86 host)
+#       ios-386                 (darwin-x86 host)
 #       linux-386               (linux-x86 host)
 #       linux-486               (linux-x86 host)
 #       linux-586               (linux-x86 host)
 #       linux-686               (linux-x86 host)
-#       linux-arm               (linux-x86 host)
+#       linux-arm               (linux-x86 or -x86_64 host)
 #       linux-arm_eb            (linux-x86 host)
 #       linux-arm_el            (linux-x86 host)
 #       linux-athlon            (linux-x86 host)
@@ -100,6 +106,7 @@
 #       RTEMS-pc386
 #       RTEMS-psim
 #       RTEMS-uC5282
+#       win32-x86-mingw         (linux-x86 or -x86_64 host)
 #
 
 # Definitions of CROSS_COMPILER_TARGET_ARCHS in
@@ -174,7 +181,7 @@ COMPAT_313=NO
 #INSTALL_LOCATION=<fullpathname>
 
 # Use POSIX thread priority scheduling (YES or NO)
-USE_POSIX_THREAD_PRIORITY_SCHEDULING = NO
+USE_POSIX_THREAD_PRIORITY_SCHEDULING = YES
 
 #  Site version number, if set will append '-' and this string to the
 #  EPICS version number string that is reported by many tools

configure/RULES.Db

@@ -24,8 +24,8 @@ vpath %.acs $(USR_VPATH) $(GENERIC_SRC_DIRS) $(COMMON_DIR)
 DBD_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DBD) $(RELEASE_DBD_DIRS)
 DB_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DB) $(RELEASE_DB_DIRS)
 
-DBDFLAGS = $(USR_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
-DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
+DBDFLAGS = $(USR_DBDFLAGS) $(CMD_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
+DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(CMD_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
 
 #####################################################
 # To allow os specific dbd files AND have the -j option work properly,
@@ -119,6 +119,9 @@ DBDDEPENDS_CMD = -$(MKMF) -m $(notdir $@)$(DEP) $(DBDDEPENDS_FLAGS) $@ $<
 
 ifndef T_A
 
+DEP = .d
+TEMPLATE3+=$(addsuffix .template, $(TEMPLATE2))
+
 COMMON_DIR = .
 INSTALL_DBDS =
 INSTALL_DBS =
@@ -131,7 +134,7 @@ ACTIONS += build
 ACTIONS += install
 ACTIONS += buildInstall
 ACTIONS += browse
-ACTIONS += runtests
+ACTIONS += runtests tapfiles
 
 actionArchTargets = $(foreach x, $(ACTIONS),\ $(foreach arch,$(BUILD_ARCHS), $(x)$(DIVIDER)$(arch)))
 
@@ -196,7 +199,7 @@ $(COMMON_DIR)/%.substitutions:
 endif
 
 $(INSTALL_DB)/%.substitutions: %.substitutions
-	$(ECHO) "Installing db file $@"
+	$(ECHO) "Installing substitution file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
 .PRECIOUS: $(COMMON_DIR)/%.substitutions
@@ -210,7 +213,7 @@ $(COMMON_DIR)/%.template: $(COMMON_DIR)/%.edf
 	@$(RM) $@.VAR
 
 $(INSTALL_DB)/%.template: %.template
-	$(ECHO) "Installing db file $@"
+	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
 .PRECIOUS: $(COMMON_DIR)/%.template
@@ -348,7 +351,7 @@ $(COMMON_DIR)/%.db: $(COMMON_DIR)/%.db$(RAW)
 else
 
 $(INSTALL_DB)/%: %
-	$(ECHO) "Installing db file $@"
+	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 endif
 
@@ -368,17 +371,14 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 
 ##################################################### register record,device,driver support
 
-IOC_INST_TOP := $(firstword $(IOCS_APPL_TOP) \
-        $(shell $(PERL) $(TOOLS)/fullPathName.pl $(INSTALL_LOCATION) ) )
-
 %_registerRecordDeviceDriver.cpp: $(COMMON_DIR)/%.dbd 
 	@$(RM) $@ $*.tmp
-	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOC_INST_TOP) > $*.tmp
+	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOCS_APPL_TOP) > $*.tmp
 	$(MV) $*.tmp $@
 
 %_registerRecordDeviceDriver.cpp: %.dbd 
 	@$(RM) $@ $*.tmp
-	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOC_INST_TOP) > $*.tmp
+	$(REGISTERRECORDDEVICEDRIVER) $< $(basename $@) $(IOCS_APPL_TOP) > $*.tmp
 	$(MV) $*.tmp $@
 
 .PRECIOUS: %_registerRecordDeviceDriver.cpp

configure/RULES.ioc

@@ -1,13 +1,13 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2013 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# EPICS BASE is distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
 #RULES.ioc
+
 include $(CONFIG)/RULES_DIRS
 
 build$(DIVIDER)$(ARCH) build: buildInstall
@@ -15,24 +15,20 @@ install$(DIVIDER)$(ARCH) install: buildInstall
 $(ARCH): buildInstall
 
 ifeq ($(filter $(ARCH),$(BUILD_ARCHS)),$(ARCH))
-buildInstall$(DIVIDER)$(ARCH) buildInstall: $(TARGETS)
+    buildInstall$(DIVIDER)$(ARCH) buildInstall: $(TARGETS)
 
-clean$(DIVIDER)$(ARCH) clean:
-	$(RM) cdCommands envPaths dllPath.bat
-
-else 
-buildInstall$(DIVIDER)$(ARCH) buildInstall:
-clean$(DIVIDER)$(ARCH) clean:
-endif
-
-cdCommands envPaths dllPath.bat: $(wildcard $(TOP)/configure/RELEASE*) \
-	$(TOP)/configure/CONFIG $(INSTALL_BIN)
-ifeq ($(IOCS_APPL_TOP),)
-	$(PERL) $(TOOLS)/convertRelease.pl -a $(ARCH) $@
+    clean$(DIVIDER)$(ARCH) clean:
+	$(RM) cdCommands envPaths dllPath.bat relPaths.sh
 else
-	$(PERL) $(TOOLS)/convertRelease.pl -a $(ARCH) -t $(IOCS_APPL_TOP) $@
+    buildInstall$(DIVIDER)$(ARCH) buildInstall:
+    clean$(DIVIDER)$(ARCH) clean:
 endif
 
+cdCommands envPaths dllPath.bat relPaths.sh: \
+    $(wildcard $(TOP)/configure/RELEASE*) \
+    $(wildcard $(TOP)/configure/CONFIG_SITE*) $(INSTALL_BIN)
+	$(CONVERTRELEASE) -a $(ARCH) -t $(IOCS_APPL_TOP) $@
+
 realclean:
-	$(RM) cdCommands envPaths dllPath.bat
+	$(RM) cdCommands envPaths dllPath.bat relPaths.sh
 

configure/RULES_ARCHS

@@ -17,41 +17,40 @@ ACTIONS += build
 ACTIONS += install
 ACTIONS += buildInstall
 ACTIONS += browse
-ACTIONS += runtests
+ACTIONS += runtests tapfiles
 #ACTIONS += rebuild
 
-actionPart = $(word 1, $(subst $(DIVIDER), ,$@))
-archPart = $(word 2, $(subst $(DIVIDER), ,$@))
+actionArchTargets = $(foreach action, $(ACTIONS), \
+    $(foreach arch, $(BUILD_ARCHS), \
+        $(action)$(DIVIDER)$(arch)))
 
-actionArchTargets = $(foreach x, $(ACTIONS),\
-		$(foreach arch,$(BUILD_ARCHS), $(x)$(DIVIDER)$(arch)))
-
-cleanArchTargets = $(foreach arch,$(BUILD_ARCHS), clean$(DIVIDER)$(arch))
+cleanArchTargets = $(foreach arch, $(BUILD_ARCHS), \
+    clean$(DIVIDER)$(arch))
 
 buildDirs = $(addprefix O.,$(BUILD_ARCHS))
 
-#*************************************************************************
-# Create epics_host_arch dependancies for GNU make -j option
-# Only works with GNU make 3.81 or later (uses eval function)
+# Include <top>/cfg/DIR_RULES* files from tops defined in RELEASE* files
+# Do this here so they can add ACTIONS
+#
+RELEASE_CFG_DIR_RULES = $(foreach top, $(RELEASE_TOPS), \
+    $(wildcard $($(top))/cfg/DIR_RULES*))
+ifneq ($(RELEASE_CFG_DIR_RULES),)
+  include $(RELEASE_CFG_DIR_RULES)
+endif
+
+# Create EPICS_HOST_ARCH dependancies for GNU make -j option.
 # Needed in dirs where EPICS_HOST_ARCH build creates a tool used in 
 # cross arch builds
 
 CROSS_ARCHS += $(CROSS1) $(CROSS2)
 
-# j is NOT found in MAKEFLAGS when using make 3.81
-# Hope to uncomment this for GNU make 3.82
-#ifeq ($(findstring j,$(MAKEFLAGS)),j)
-
 define DEP_template
 $(2): $$(EPICS_HOST_ARCH)
 $(1)$$(DIVIDER)$(2): $(1)$$(DIVIDER)$$(EPICS_HOST_ARCH) O.$(2)
 endef
-
-$(foreach action, $(ACTIONS), $(foreach arch,\
-      $(CROSS_ARCHS),$(eval $(call DEP_template,$(action),$(arch)))))
-
-#endif
-#*************************************************************************
+$(foreach action, $(ACTIONS), \
+    $(foreach arch, $(CROSS_ARCHS), \
+        $(eval $(call DEP_template,$(action),$(arch)))))
 
 # Allows rebuild to work with parallel builds option, -j.
 ifeq (rebuild,$(filter rebuild,$(MAKECMDGOALS)))
@@ -59,8 +58,11 @@ $(buildDirs) O.Common : clean
 rebuild: install
 endif
 
+archPart = $(word 2, $(subst $(DIVIDER), ,$@))
+actionPart = $(word 1, $(subst $(DIVIDER), ,$@))
 $(actionArchTargets) : $(buildDirs) O.Common
-	$(MAKE) -C O.$(archPart) -f ../Makefile TOP=$(TOP)/.. T_A=$(archPart) $(actionPart)
+	$(MAKE) -C O.$(archPart) -f ../Makefile TOP=$(TOP)/.. \
+	    T_A=$(archPart) $(actionPart)
 
 $(BUILD_ARCHS) : % : O.% O.Common
 	$(MAKE) -C O.$@ -f ../Makefile TOP=$(TOP)/.. T_A=$@
@@ -73,8 +75,7 @@ $(buildDirs):
 O.Common:
 	$(MKDIR) O.Common
 
-#
-# special clean rule
+# Clean rules
 #
 clean ::
 	$(RMDIR) $(addprefix O.,$(BUILD_ARCHS)) O.Common
@@ -92,3 +93,7 @@ realclean ::
 .PHONY : $(cleanArchTargets)
 .PHONY : $(BUILD_ARCHS) rebuild
 .PHONY : $(ACTIONS) clean realclean archclean all
+
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_BUILD

@@ -96,6 +96,8 @@ ifneq (,$(strip $(TESTS)))
 TARGETS += testspec
 endif
 
+TAPFILES += $(TESTSCRIPTS:.t=.tap)
+
 #---------------------------------------------------------------
 #   Libraries 
 #
@@ -142,7 +144,8 @@ clean::
 	@$(RM) *.i *$(OBJ) *.a $(TESTPRODNAME) $(LIBNAME) $(SHRLIBNAME) \
 	$(INC) $(TARGETS) $(DLL_LINK_LIBNAME) $(TDS) \
 	*.out MakefileInclude  $(LOADABLE_SHRLIBNAME) *.manifest *.exp \
-	$(COMMON_INC) $(HDEPENDS_FILES) $(PRODTARGETS) $(TESTSCRIPTS)
+	$(COMMON_INC) $(HDEPENDS_FILES) $(PRODTARGETS) \
+	$(TESTSCRIPTS) $(TAPFILES)
 ifdef RES
 	@$(RM) *$(RES)
 endif
@@ -195,17 +198,23 @@ $(OBJLIBNAME):%$(OBJ):
 	@$(RM) $@
 	$(COMPILE.ctdt) $<
 
-%$(OBJ): %.c
+# Cancel GNUMake's built-in rules, which don't have our _INC
+# dependencies so could get used in some circumstances (gdd)
+%.o : %.c
+%.o : %.cc
+%.o : %.cpp
+
+%$(OBJ): %.c $(COMMON_INC) $(INSTALL_INC)
 	@$(HDEPENDS_CMD)
 	@$(RM) $@
 	$(COMPILE.c) $(call PATH_FILTER,$<) $(COMPILE_FILTER.c)
 
-%$(OBJ): %.cc
+%$(OBJ): %.cc $(COMMON_INC) $(INSTALL_INC)
 	@$(HDEPENDS_CMD)
 	@$(RM) $@
 	$(COMPILE.cpp) $(call PATH_FILTER,$<) $(COMPILE_FILTER.cpp)
 
-%$(OBJ): %.cpp
+%$(OBJ): %.cpp $(COMMON_INC) $(INSTALL_INC)
 	@$(HDEPENDS_CMD)
 	@$(RM) $@
 	$(COMPILE.cpp) $(call PATH_FILTER,$<) $(COMPILE_FILTER.cpp)
@@ -322,6 +331,12 @@ $(OBJLIB_MUNCHNAME):%.munch : %_ctdt$(OBJ) %$(OBJ)
 	@$(RM) $@
 	$(MUNCH_CMD)
 
+# GeSys modules for RTEMS
+$(MODNAME): %$(MODEXT): %$(EXE)
+	@echo "Building module $@"
+	@$(RM) $@
+	$(LINK.mod)
+
 runtests: $(TESTSCRIPTS)
 	-$(PERL) -MTest::Harness -e 'runtests @ARGV if @ARGV;' $^
 
@@ -332,16 +347,22 @@ testspec: $(TESTSCRIPTS)
 	$(if $^, @echo Tests: $^ >> $@)
 	$(if $(TESTSPEC_$(OS_CLASS)), @echo "Harness: $(TESTSPEC_$(OS_CLASS))" >> $@)
 
+tapfiles: $(TESTSCRIPTS) $(TAPFILES)
+
+# A .tap file is the output from running the associated test script
+%.tap: %.t
+	-$(PERL) $< -tap > $@
+
 # If there's a perl test script (.plt) available, use it
 %.t: ../%.plt
 	@$(RM) $@
-	@$(CP) $< $@
+	$(CP) $< $@
 
-# Some versions of Test::Harness expect test programs in perl only.
+# Test programs (.t files) must be written in Perl.
 # Generate a perl program to exec the real test binary.
-%.t: %$(EXE)
+%.t: %$(EXE) $(TOOLS)/makeTestfile.pl
 	@$(RM) $@
-	@$(PERL) $(TOOLS)/makeTestfile.pl $@ $<
+	$(PERL) $(TOOLS)/makeTestfile.pl $@ $<
 
 #---------------------------------------------------------------
 ## Install rules for BIN_INSTALLS and LIB_INSTALLS
@@ -383,7 +404,7 @@ $(INSTALL_LIB)/%.lib: %.lib
 
 $(INSTALL_SHRLIBS): $(INSTALL_SHRLIB)/%: %
 	$(ECHO) "Installing shared library $@"
-	@$(INSTALL_LIBRARY) -d -m $(LIB_PERMISSIONS) $< $(INSTALL_SHRLIB)
+	@$(INSTALL_LIBRARY) -d -m $(SHRLIB_PERMISSIONS) $< $(INSTALL_SHRLIB)
 ifneq ($(SHRLIB_SUFFIX),$(SHRLIB_SUFFIX_BASE))
 ifneq (,$(strip $(SHRLIB_VERSION)))
 	@$(RM) $(subst $(SHRLIB_SUFFIX),$(SHRLIB_SUFFIX_BASE),$@)

configure/RULES_DIRS

@@ -12,28 +12,33 @@
 
 
 ARCHS += $(BUILD_ARCHS)
-ACTIONS += inc build install buildInstall clean realclean archclean runtests
-
-dirPart = $(join $(dir $@), $(word 1, $(subst $(DIVIDER), ,$(notdir $@))))
-
-actionArchPart = $(join $(word 2, $(subst $(DIVIDER), ,$(notdir $@))), \
- $(addprefix $(DIVIDER),$(word 3, $(subst $(DIVIDER), ,$(notdir $@))))) 
+ACTIONS += inc build install buildInstall clean realclean archclean
+ACTIONS += runtests tapfiles
 
 dirActionArchTargets = $(foreach dir, $(DIRS), \
-                       $(foreach action, $(ACTIONS),\
-                       $(foreach arch, $(ARCHS), \
-                       $(dir)$(DIVIDER)$(action)$(DIVIDER)$(arch))))
+    $(foreach action, $(ACTIONS), \
+        $(foreach arch, $(ARCHS), \
+            $(dir)$(DIVIDER)$(action)$(DIVIDER)$(arch))))
 dirArchTargets += $(foreach dir, $(DIRS), \
-                  $(foreach arch, $(ARCHS),\
-                  $(dir)$(DIVIDER)$(arch)))
+    $(foreach arch, $(ARCHS), \
+        $(dir)$(DIVIDER)$(arch)))
 dirActionTargets += $(foreach dir, $(DIRS), \
-                    $(foreach action, $(ACTIONS),\
-                    $(dir)$(DIVIDER)$(action)))
-actionArchTargets = $(foreach action, $(ACTIONS),\
-                    $(foreach arch, $(ARCHS), \
-                    $(action)$(DIVIDER)$(arch)))
+    $(foreach action, $(ACTIONS), \
+        $(dir)$(DIVIDER)$(action)))
+actionArchTargets = $(foreach action, $(ACTIONS), \
+    $(foreach arch, $(ARCHS), \
+        $(action)$(DIVIDER)$(arch)))
 
-all : install
+all: install
+
+# Include <top>/cfg/DIR_RULES* files from tops defined in RELEASE* files
+# Do this here so they can add ACTIONS
+#
+RELEASE_CFG_DIR_RULES = $(foreach top, $(RELEASE_TOPS), \
+    $(wildcard $($(top))/cfg/DIR_RULES*))
+ifneq ($(RELEASE_CFG_DIR_RULES),)
+  include $(RELEASE_CFG_DIR_RULES)
+endif
 
 # Allows rebuild to work with parallel builds option, -j.
 ifeq (rebuild,$(filter rebuild,$(MAKECMDGOALS)))
@@ -47,30 +52,42 @@ endif
 define DEP_template1
 $(1): $$($(1)_DEPEND_DIRS)
 endef
-$(foreach dir, $(DIRS),$(eval $(call DEP_template1,$(dir))))
+$(foreach dir, $(DIRS), \
+    $(eval $(call DEP_template1,$(dir))))
 
 define DEP_template2
-$(1)$$(DIVIDER)$(2) : $$(foreach ddir, $$($(1)_DEPEND_DIRS),$$(addsuffix $$(DIVIDER)$(2),$$(ddir)))
+$(1)$$(DIVIDER)$(2) : $$(foreach ddir, $$($(1)_DEPEND_DIRS), \
+    $$(addsuffix $$(DIVIDER)$(2),$$(ddir)))
 endef
-$(foreach action, $(ACTIONS), $(foreach dir, $(DIRS),$(eval $(call DEP_template2,$(dir),$(action)))))
+$(foreach action, $(ACTIONS), \
+    $(foreach dir, $(DIRS), \
+        $(eval $(call DEP_template2,$(dir),$(action)))))
 
 define DEP_template3
-$(1)$$(DIVIDER)$(2) : $$(foreach ddir, $$($(1)_DEPEND_DIRS),$$(addsuffix $$(DIVIDER)$(2),$$(ddir)))
+$(1)$$(DIVIDER)$(2) : $$(foreach ddir, $$($(1)_DEPEND_DIRS), \
+    $$(addsuffix $$(DIVIDER)$(2),$$(ddir)))
 endef
-$(foreach arch, $(ARCHS), $(foreach dir, $(DIRS),$(eval $(call DEP_template3,$(dir),$(arch)))))
+$(foreach arch, $(ARCHS), \
+    $(foreach dir, $(DIRS), \
+        $(eval $(call DEP_template3,$(dir),$(arch)))))
 
 define DEP_template4
-$(1)$$(DIVIDER)$(2)$$(DIVIDER)$(3) : $$(foreach ddir, $$($(1)_DEPEND_DIRS),$$(addsuffix $$(DIVIDER)$(2)$$(DIVIDER)$(3),$$(ddir)))
+$(1)$$(DIVIDER)$(2)$$(DIVIDER)$(3) : $$(foreach ddir, $$($(1)_DEPEND_DIRS), \
+    $$(addsuffix $$(DIVIDER)$(2)$$(DIVIDER)$(3),$$(ddir)))
 endef
-$(foreach arch, $(ARCHS), $(foreach action, $(ACTIONS), $(foreach dir, $(DIRS), \
-              $(eval $(call DEP_template4,$(dir),$(action),$(arch))))))
-
+$(foreach arch, $(ARCHS), \
+    $(foreach action, $(ACTIONS), \
+        $(foreach dir, $(DIRS), \
+            $(eval $(call DEP_template4,$(dir),$(action),$(arch))))))
 
+dirPart = $(join $(dir $@), $(word 1, $(subst $(DIVIDER), ,$(notdir $@))))
+actionArchPart = $(join $(word 2, $(subst $(DIVIDER), ,$(notdir $@))), \
+   $(addprefix $(DIVIDER),$(word 3, $(subst $(DIVIDER), ,$(notdir $@))))) 
 $(DIRS) $(dirActionTargets) $(dirArchTargets) $(dirActionArchTargets) :
 	$(MAKE) -C $(dirPart) $(actionArchPart)
 
 $(ARCHS) $(ACTIONS) $(actionArchTargets) :%: \
-	$(foreach dir, $(DIRS), $(dir)$(DIVIDER)%)
+    $(foreach dir, $(DIRS), $(dir)$(DIVIDER)%)
 
 .PHONY : $(DIRS) all rebuild
 .PHONY : $(ARCHS) $(ACTIONS)
@@ -78,3 +95,7 @@ $(ARCHS) $(ACTIONS) $(actionArchTargets) :%: \
 .PHONY : $(dirActionArchTargets)
 .PHONY : $(actionArchTargets)
 
+
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_FILE_TYPE

@@ -1,32 +1,32 @@
 #*************************************************************************
-# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2013 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution. 
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
+#
 # $Revision-Id$
 #
 
-#---------------------------------------------------------------
-# Include <top>/configure/RULES_BUILD definitions from tops defined in RELEASE* files
+# Include <top>/configure/RULES_BUILD from tops defined in RELEASE* files
 #
-RELEASE_RULES_BUILDS = $(foreach top, $(RELEASE_TOPS), $(wildcard $($(top))/configure/RULES_BUILD))
+RELEASE_RULES_BUILDS = $(foreach top, $(RELEASE_TOPS), \
+    $(wildcard $($(top))/configure/RULES_BUILD))
 ifneq ($(RELEASE_RULES_BUILDS),)
   include $(RELEASE_RULES_BUILDS)
 endif
 
-#---------------------------------------------------------------
-# Include <top>/cfg/RULES* definitions from tops defined in RELEASE* files
+# Include <top>/cfg/RULES* files from tops defined in RELEASE* files
 #
-RELEASE_CFG_RULES = $(foreach top, $(RELEASE_TOPS), $(wildcard $($(top))/cfg/RULES*))
+RELEASE_CFG_RULES = $(foreach top, $(RELEASE_TOPS), \
+    $(wildcard $($(top))/cfg/RULES*))
 ifneq ($(RELEASE_CFG_RULES),)
   include $(RELEASE_CFG_RULES)
 endif
 
-#---------------------------------------------------------------
-# If this is not BASE then include TOP/configure/RULES_BUILD definitions
+# If this is not BASE then include <TOP>/configure/RULES_BUILD
 #
 ifeq ($(wildcard $(TOP)/configure/CONFIG_BASE_VERSION),)
 TOP_RULES_BUILDS = $(wildcard $(TOP)/configure/RULES_BUILD)
@@ -35,39 +35,38 @@ ifneq ($(TOP_RULES_BUILDS),)
 endif
 endif
 
-#---------------------------------------------
-# Include existing and new $(INSTALL_CFG)/* definitions
+# Include our own $(INSTALL_CFG)/RULES* files
 #
-TOP_CFG_FILES = $(sort $(wildcard $(INSTALL_CFG)/RULES*) \
-                       $(wildcard $(INSTALL_CFG)/CONFIG*) \
-                       $(addprefix $(INSTALL_CFG)/,$(CFG)))
-ifneq ($(TOP_CFG_FILES),)
-  include $(TOP_CFG_FILES)
+TOP_CFG_RULES = $(wildcard $(INSTALL_CFG)/RULES*)
+ifneq ($(TOP_CFG_RULES),)
+  include $(TOP_CFG_RULES)
 endif
 
-#---------------------------------------------------------------
-
+# Rules to install each FILE_TYPE
+#
 define FILE_TYPE_template
-
-$(1) += $$(if $$(strip $$($(1)_$$(OS_CLASS))),$$(subst -nil-,,$$($(1)_$$(OS_CLASS))), $$($(1)_DEFAULT))
-
+$(1) += $$(if $$(strip $$($(1)_$(OS_CLASS))), \
+    $$(subst -nil-,,$$($(1)_$(OS_CLASS))), \
+    $$($(1)_DEFAULT))
 INSTALLS_$(1) = $$($(1):%=$$(INSTALL_$(1))/%)
 
 $$(INSTALL_$(1))/%: ../%
 	$(ECHO) "Installing $(1) file $$@"
 	@$$(INSTALL) -d -m  $$(INSTALL_PERMISSIONS) $$< $$(dir $$@)
-
 $$(INSTALL_$(1))/%: %
 	$(ECHO) "Installing $(1) file $$@"
 	@$$(INSTALL) -d -m  $$(INSTALL_PERMISSIONS) $$< $$(dir $$@)
 
-buildInstall : $$(INSTALLS_$(1))
-
+buildInstall: $$(INSTALLS_$(1))
 endef
+$(foreach type, $(FILE_TYPE), \
+    $(eval $(call FILE_TYPE_template,$(strip $(type)))))
 
-$(foreach type, $(FILE_TYPE),$(eval $(call FILE_TYPE_template,$(strip $(type)))))
-#---------------------------------------------
-
+# Cleaning FILE_TYPE files
+#
 clean::
 	@$(RM) $(foreach type, $(FILE_TYPE), $($(type)))
 
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_TOP

@@ -4,17 +4,17 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution. 
+# in the file LICENSE that is included with this distribution.
 #*************************************************************************
 #
-#  $Revision-Id$
+# $Revision-Id$
 #
 
 include $(CONFIG)/RULES_DIRS
 
 distclean: realclean cvsclean realuninstall
 
-CVSCLEAN=$(firstword $(wildcard $(TOOLS)/cvsclean.pl $(TOP)/src/tools/cvsclean.pl))
+CVSCLEAN = $(call FIND_TOOL,cvsclean.pl)
 cvsclean:
 	$(PERL) $(CVSCLEAN)
 
@@ -22,17 +22,15 @@ realuninstall: uninstallDirs
 	$(RMDIR) $(INSTALL_LOCATION_BIN)
 	$(RMDIR) $(INSTALL_LOCATION_LIB)
 
-UNINSTALL_DIRS += $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC)\
-        $(INSTALL_HTML) $(INSTALL_JAVA) $(INSTALL_TEMPLATES) \
-        $(INSTALL_DB)
+UNINSTALL_DIRS += $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC) \
+    $(INSTALL_HTML) $(INSTALL_JAVA) $(INSTALL_TEMPLATES) $(INSTALL_DB)
 UNINSTALL_DIRS += $(DIRECTORY_TARGETS)
 uninstallDirs:
 	$(RMDIR) $(UNINSTALL_DIRS)
 
 uninstall: archuninstall uninstallDirs
 
-archuninstall: $(addprefix uninstall$(DIVIDER),$(BUILD_ARCHS))
-	@$(MAKE) -f Makefile cleandirs
+archuninstall: $(addprefix uninstall$(DIVIDER),$(BUILD_ARCHS)) | cleandirs
 
 archPart = $(word 2, $(subst $(DIVIDER), ,$@))
 uninstall$(DIVIDER)%:
@@ -40,14 +38,14 @@ uninstall$(DIVIDER)%:
 	$(RMDIR) $(INSTALL_LOCATION_LIB)/$(archPart)
 
 cleandirs:
+	@$(NOP)
 ifeq ($(wildcard $(INSTALL_LOCATION_BIN)/*),)
 	$(RMDIR) $(INSTALL_LOCATION_BIN)
 endif
 ifeq ($(wildcard $(INSTALL_LOCATION_LIB)/*),)
 	$(RMDIR) $(INSTALL_LOCATION_LIB)
 endif
-	@echo
-# The echo above stops a "nothing to be done for cleandirs" message
+
 
 help:
 	@echo "Usage: gnumake [options] [target] ..."
@@ -64,11 +62,11 @@ help:
 	@echo "     rebuild        - Same as clean install"
 	@echo "     archclean      - Removes O.<arch> dirs but not O.Common dir"
 	@echo "\"Partial\" build targets supported by Makefiles:"
-	@echo "     inc.<arch>     - Installs <arch> only header files."
-	@echo "     build.<arch>   - Builds and installs <arch> only."
-	@echo "     install.<arch> - Builds and installs <arch> only."
-	@echo "     clean.<arch>   - Cleans <arch> binaries in O.<arch> dirs only."
-	@echo "     uninstall.<arch> - Remove bin & lib directories for <arch> only."
+	@echo "     inc$(DIVIDER)<arch>     - Installs <arch> only header files."
+	@echo "     build$(DIVIDER)<arch>   - Builds and installs <arch> only."
+	@echo "     install$(DIVIDER)<arch> - Builds and installs <arch> only."
+	@echo "     clean$(DIVIDER)<arch>   - Cleans <arch> binaries in O.<arch> dirs only."
+	@echo "     uninstall$(DIVIDER)<arch> - Remove bin & lib directories for <arch> only."
 	@echo "Targets supported by top level Makefile:"
 	@echo "     archuninstall  - Remove bin & lib directories created by this hostarch."
 	@echo "     uninstall      - Remove install directories created by this hostarch."
@@ -82,3 +80,10 @@ help:
 .PHONY: cleandirs distclean cvsclean realuninstall archuninstall uninstallDirs
 .PHONY: uninstall help
 
+# Include <top>/cfg/TOP_RULES* files from tops defined in RELEASE* files
+#
+RELEASE_CFG_TOP_RULES = $(foreach top, $(RELEASE_TOPS), \
+    $(wildcard $($(top))/cfg/TOP_RULES*))
+ifneq ($(RELEASE_CFG_TOP_RULES),)
+  include $(RELEASE_CFG_TOP_RULES)
+endif

configure/os/CONFIG.Common.RTEMS

@@ -49,28 +49,31 @@ RANLIB := $(RTEMS_TOOLS)/bin/$(RANLIB)
 VALID_BUILDS = Ioc
 
 #--------------------------------------------------
-# The RTEMS Makefiles redefine several macros, so we have to go
-# through the following contortions to get the EPICS flags back.
-CFLAGS = $(CROSS_CFLAGS) $(OPT_CFLAGS) $(DEBUG_CFLAGS)\
- $(WARN_CFLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS)\
- $(CODE_CFLAGS) $(STATIC_CFLAGS)  $(OP_SYS_CFLAGS) $(LIBRARY_SRC_CFLAGS)\
- $(HDEPENDS_CFLAGS)
+# The RTEMS Makefiles redefine several macros, so we have to
+# reset them to the proper EPICS values, from CONFIG_COMMON
+CFLAGS = $($(BUILD_CLASS)_CFLAGS) $(POSIX_CFLAGS) $(OPT_CFLAGS)\
+ $(DEBUG_CFLAGS) $(PIPE_CFLAGS) $(WARN_CFLAGS) $(TARGET_CFLAGS)\
+ $(USR_CFLAGS) $(CMD_CFLAGS) $(ARCH_DEP_CFLAGS) $(CODE_CFLAGS)\
+ $(STATIC_CFLAGS) $(OP_SYS_CFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
 
-CXXFLAGS = $(CROSS_CXXFLAGS) $(OPT_CXXFLAGS)\
- $(DEBUG_CXXFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS)\
- $(ARCH_DEP_CXXFLAGS) $(CODE_CXXFLAGS) $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS)\
- $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
+CXXFLAGS = $($(BUILD_CLASS)_CXXFLAGS) $(POSIX_CXXFLAGS) $(OPT_CXXFLAGS)\
+ $(DEBUG_CXXFLAGS) $(PIPE_CFLAGS) $(WARN_CXXFLAGS) $(TARGET_CXXFLAGS)\
+ $(USR_CXXFLAGS) $(CMD_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(CODE_CXXFLAGS)\
+ $(STATIC_CXXCFLAGS) $(OP_SYS_CXXFLAGS) $(LIBRARY_SRC_CFLAGS) $(HDEPENDS_CFLAGS)
 
-LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) \
- $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(OP_SYS_LDFLAGS) $(CROSS_LDFLAGS)\
- $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
+LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(CMD_LDFLAGS)\
+ $(POSIX_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(OP_SYS_LDFLAGS)\
+ $($(BUILD_CLASS)_LDFLAGS) $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
 
-LDLIBS = \
- $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS)
+LDLIBS = $(POSIX_LDLIBS) $(ARCH_DEP_LDLIBS) $(DEBUG_LDLIBS) $(OP_SYS_LDLIBS)\
+ $(GNU_LDLIBS_$(GNU))
 
-CPPFLAGS += $(CROSS_CPPFLAGS) $(POSIX_CPPFLAGS)\
-$(BASE_CPPFLAGS) $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS)\
- $(OP_SYS_CPPFLAGS) $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
+CPPFLAGS += $($(BUILD_CLASS)_CPPFLAGS) $(POSIX_CPPFLAGS) $(OPT_CPPFLAGS)\
+ $(DEBUG_CPPFLAGS) $(WARN_CPPFLAGS) $(BASE_CPPFLAGS) $(TARGET_CPPFLAGS)\
+ $(USR_CPPFLAGS) $(CMD_CPPFLAGS) $(ARCH_DEP_CPPFLAGS) $(OP_SYS_CPPFLAGS)\
+ $(OP_SYS_INCLUDE_CPPFLAGS) $(CODE_CPPFLAGS)
+
+ECHO = @$(if $(findstring s,$(patsubst T_A=%,,$(MAKEFLAGS))),$(NOP),echo)
 
 #--------------------------------------------------
 # Although RTEMS uses gcc, it wants to use gcc its own way
@@ -82,6 +85,8 @@ OPT_CXXFLAGS_YES = $(CFLAGS_OPTIMIZE_V)
 OPT_CFLAGS_NO    = $(CFLAGS_DEBUG_V)
 OPT_CXXFLAGS_NO  = $(CFLAGS_DEBUG_V)
 
+MODEXT=.obj
+
 #--------------------------------------------------
 # operating system class (include/os/<os_class>)
 OS_CLASS = RTEMS
@@ -96,6 +101,42 @@ OP_SYS_LDFLAGS += $(CPU_CFLAGS) -u Init \
                  $(PROJECT_RELEASE)/lib/no-signal.rel \
                  $(PROJECT_RELEASE)/lib/no-rtmon.rel
 
+MOD_SYS_LDFLAGS += $(CPU_CFLAGS) -Wl,-r -nostdlib
+
+# Do not link against libraries which are part of the Generic Image
+GESYS_LIBS += -lgcc
+GESYS_LIBS += -lc -lm -lrtemscpu -lrtemsbsp -lrtems++ -lbspExt
+GESYS_LIBS += -lcexp -ltecla_r -lspencer_regexp -lpmelf -lpmbfd
+GESYS_LIBS += -lnfs -ltelnetd -lrtems-gdb-stub
+
+# While not part of the Generic Image it provides symbols which
+# would conflict.
+GESYS_LIBS += -lrtemsCom
+
+#--------------------------------------------------
+# Options for building GeSys loadable objects
+
+MODNAME_YES = $(PRODNAME:%$(EXE)=%$(MODEXT))
+MODNAME += $(MODNAME_$(USE_GESYS))
+PRODTARGETS += $(MODNAME)
+BIN_INSTALLS += $(MODNAME)
+
+# changes to LDFLAGS in CONFIG_COMMON and LINK.cpp in CONFIG.Common.UnixCommon
+# should be reflected here with the following exceptions
+#
+# replace OP_SYS_LDFLAGS with MOD_SYS_LDFLAGS
+# replace PROD_LDLIBS with MOD_LDLIBS
+# remove STATIC_LDFLAGS
+
+MOD_LDLIBS = $(filter-out $(GESYS_LIBS),$(PROD_LDLIBS))
+
+MOD_LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(POSIX_LDFLAGS) \
+ $(ARCH_DEP_LDFLAGS) $(DEBUG_LDFLAGS) $(MOD_SYS_LDFLAGS) $($(BUILD_CLASS)_LDFLAGS)\
+ $(RUNTIME_LDFLAGS) $(CODE_LDFLAGS)
+
+LINK.mod = $(CCC) -o $@ $(PRODDIR_LDFLAGS) $(MOD_LDFLAGS)
+LINK.mod += $(PROD_LDFLAGS) $(PROD_LD_OBJS) $(PROD_LD_RESS) $(MOD_LDLIBS)
+
 #--------------------------------------------------
 # RTEMS has neither shared libraries nor dynamic loading
 STATIC_BUILD=YES

configure/os/CONFIG.Common.RTEMS-mvme2100

@@ -1,5 +1,5 @@
 #
-# CONFIG.Common.RTEMS-mvme3100
+# CONFIG.Common.RTEMS-mvme2100
 # $Revision-Id$
 # Author: W. Eric Norum <wenorum@lbl.gov>
 #

configure/os/CONFIG.Common.RTEMS-mvme5500

@@ -22,4 +22,6 @@ define MUNCH_CMD
 	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary $< $@
 endef
 
+OP_SYS_LDLIBS += -lbspExt
+
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-pc386

@@ -12,7 +12,7 @@ MUNCH_SUFFIX = .boot
 MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
 define MUNCH_CMD
 	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< temp.bin
-	$(PROJECT_RELEASE)/build-tools/bin2boot $@ 0x00097E00 \
+	$(BIN2BOOT) $@ 0x00097E00 \
 		$(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 temp.bin 0x00100000 0
 	rm -f temp.bin
 endef

configure/os/CONFIG.Common.UnixCommon

@@ -50,7 +50,7 @@ SHRLIB_LDLIBS = $(addprefix -l, $($*_LDLIBS) $(LIB_LIBS) $(USR_LIBS))\
  $(LDLIBS)
 
 SHRLIB_DEPLIB_DIRS = $(foreach word,$(sort $(dir $($*_DEPLIBS) $(SHRLIB_DEPLIBS))), \
-   $(shell $(PERL) $(TOOLS)/fullPathName.pl $(word)))
+   $(shell $(FULLPATHNAME) $(word)))
 
 SHRLIBDIR_LDFLAGS += $(SHRLIB_DEPLIB_DIRS:%=-L%)
 
@@ -73,7 +73,7 @@ PROD_LDLIBS += $($(firstword $(LDLIBS_STATIC_$(STATIC_BUILD)) \
                $(LDLIBS_SHARED_$(SHARED_LIBRARIES))))
 
 PROD_DEPLIB_DIRS = $(foreach word,$(sort $(dir $($*_DEPLIBS) $(PROD_DEPLIBS))), \
-  $(shell $(PERL) $(TOOLS)/fullPathName.pl $(word)))
+  $(shell $(FULLPATHNAME) $(word)))
 
 PRODDIR_LDFLAGS += $(PROD_DEPLIB_DIRS:%=-L%)
 

configure/os/CONFIG.Common.cygwin-x86

@@ -14,7 +14,7 @@ OS_CLASS = cygwin32
 ARCH_CLASS = x86
 
 #  Definitions used when COMMANDLINE_LIBRARY is READLINE
-LDLIBS_READLINE = -lreadline -lcurses
+LDLIBS_READLINE = -lreadline
 
 POSIX_CPPFLAGS = -D_POSIX_THREADS -D_POSIX_TIMERS
 #POSIX_CPPFLAGS += -D_POSIX_SOURCE

configure/os/CONFIG.Common.cygwin-x86_64

@@ -0,0 +1,14 @@
+# CONFIG.Common.cygwin-x86_64
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for cygwin-x86_64 target builds
+# Sites may override these definitions in CONFIG_SITE.Common.cygwin-x86_64
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.Common.cygwin-x86
+
+ARCH_DEP_CFLAGS = -m64
+ARCH_DEP_LDFLAGS = -m64
+

configure/os/CONFIG.Common.ios-arm

@@ -11,6 +11,8 @@
 IOS_PLATFORM = iPhoneOS
 
 OP_SYS_CFLAGS += -fno-inline-functions
+OP_SYS_CFLAGS += -miphoneos-version-min=$(IOS_DEPLOYMENT_TARGET)
+OP_SYS_LDFLAGS += -miphoneos-version-min=$(IOS_DEPLOYMENT_TARGET)
 
 # iOS optimization flags for arm architecture
 OPT_CFLAGS_YES = -O2

configure/os/CONFIG.Common.ios-x86

@@ -10,10 +10,8 @@
 
 IOS_PLATFORM = iPhoneSimulator
 
-#
-# Architecture-specific information
-#
-ARCH_CLASS = i386
+OP_SYS_CFLAGS += -mios-simulator-version-min=$(IOS_DEPLOYMENT_TARGET)
+OP_SYS_LDFLAGS += -mios-simulator-version-min=$(IOS_DEPLOYMENT_TARGET)
 
 # Include definitions common to all iOS targets
 include $(CONFIG)/os/CONFIG.Common.iosCommon

configure/os/CONFIG.Common.iosCommon

@@ -25,7 +25,7 @@ OS_CLASS = iOS
 #--------------------------------------------------
 # GNU and SDK directories
 GNU_DIR = $(PLATFORM_DIR)/Developer/usr
-SDK_DIR = $(PLATFORM_DIR)/Developer/SDKs/$(IOS_PLATFORM)$(IOS_VERSION).sdk
+SDK_DIR = $(PLATFORM_DIR)/Developer/SDKs/$(IOS_PLATFORM).sdk
 
 #-------------------------------------------------------
 # Build architecture flags
@@ -40,7 +40,7 @@ ARCH_DEP_LDFLAGS += $(ARCH_DEP_FLAGS)
 
 #--------------------------------------------------
 # Operating system flags
-OP_SYS_CFLAGS += -isysroot $(SDK_DIR) -D__IPHONE_OS_VERSION_MIN_REQUIRED=30200
+OP_SYS_CFLAGS += -isysroot $(SDK_DIR)
 OP_SYS_LDFLAGS += -isysroot $(SDK_DIR)
 
 #--------------------------------------------------
@@ -73,7 +73,7 @@ OP_SYS_LDFLAGS += -dynamic -Z -L$(SDK_DIR)/usr/lib -L$(SDK_DIR)/usr/lib/system
 # Shared libraries
 SHRLIB_VERSION = $(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)
 SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined suppress \
-       -install_name $(shell $(PERL) $(TOOLS)/fullPathName.pl $(INSTALL_LIB))/$@ \
+       -install_name $(shell $(FULLPATHNAME) $(INSTALL_LIB))/$@ \
        -compatibility_version $(EPICS_VERSION).$(EPICS_REVISION) \
        -current_version $(SHRLIB_VERSION)
 SHRLIB_SUFFIX_BASE = .dylib
@@ -104,6 +104,9 @@ HDEPENDS_METHOD = CMD
 -include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).iosCommon
 
 #--------------------------------------------------
-# Find the Xcode compilers for the specified SDK just once
+# Find the Xcode programs for the selected SDK
 CC := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find $(CC_$(COMPILER)))
 CCC := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find $(CCC_$(COMPILER)))
+AR := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find ar) -rc
+LD := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find ld) -r
+RANLIB := $(shell xcrun -sdk $(XCRUN_SDK_BASE) -find ranlib)

configure/os/CONFIG.Common.linux-arm

@@ -1,9 +1,7 @@
 # CONFIG.Common.linux-arm
 #
-# This file is maintained by the build community.
-#
 # Definitions for linux-arm target builds
-# Sites may override these definitions in CONFIG_SITE.Common.linux-arm
+# Override these settings in CONFIG_SITE.Common.linux-arm
 #-------------------------------------------------------
 
 # Include definitions common to all Linux targets
@@ -11,26 +9,3 @@ include $(CONFIG)/os/CONFIG.Common.linuxCommon
 
 ARCH_CLASS = arm
 
-ifeq ($(BUILD_CLASS),CROSS)
-    VALID_BUILDS = Ioc
-    GNU_TARGET = arm-linux
-
-    # prefix of compiler tools
-    CMPLR_SUFFIX =
-    CMPLR_PREFIX = $(addsuffix -,$(GNU_TARGET))
-
-    # Provide a link-time path for shared libraries
-    SHRLIBDIR_RPATH_LDFLAGS_YES += $(SHRLIB_DEPLIB_DIRS:%=-Wl,-rpath-link,%)
-    SHRLIBDIR_LDFLAGS += $(SHRLIBDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
-
-    # Provide a link-time path for products
-    PRODDIR_RPATH_LDFLAGS_YES += $(PROD_DEPLIB_DIRS:%=-Wl,-rpath-link,%)
-    PRODDIR_LDFLAGS += $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
-
-    # Provide a link-time path for readline 
-    RUNTIME_LDFLAGS_READLINE_YES = -Wl,-rpath-link,$(GNU_DIR)/lib
-    RUNTIME_LDFLAGS_READLINE = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
-    RUNTIME_LDFLAGS_READLINE_CURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
-    RUNTIME_LDFLAGS_READLINE_NCURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
-
-endif

configure/os/CONFIG.Common.linux-arm-debug

@@ -0,0 +1,13 @@
+# CONFIG.Common.linux-arm-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-arm with debug compiler flags
+# Override these settings in CONFIG_SITE.Common.linux-arm-debug
+#-------------------------------------------------------
+
+# Include definitions common to all linux-arm target archs
+include $(CONFIG)/os/CONFIG.Common.linux-arm
+
+HOST_OPT=NO

configure/os/CONFIG.Common.linuxCommon

@@ -12,13 +12,10 @@ include $(CONFIG)/os/CONFIG.Common.UnixCommon
 
 OS_CLASS = Linux
 
-CODE_CPPFLAGS = -D_REENTRANT
-
-POSIX_CPPFLAGS = -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_SOURCE=500
+# Define _GNU_SOURCE and _DEFAULT_SOURCE for maximum portability
+POSIX_CPPFLAGS = -D_GNU_SOURCE -D_DEFAULT_SOURCE
 POSIX_LDLIBS = -lpthread
 
-# -D_BSD_SOURCE for gethostname() in unistd.h as needed by cacChannelIO.cpp.
-OP_SYS_CPPFLAGS += -D_BSD_SOURCE
 OP_SYS_CPPFLAGS += -Dlinux
 OP_SYS_LDLIBS += -lrt -ldl
 

configure/os/CONFIG.Common.solaris-sparc

@@ -21,7 +21,6 @@ COMPILER_LDFLAGS += -mt
 SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
 
 POSIX_CPPFLAGS += -D_POSIX_C_SOURCE=199506L $(POSIX_CPPFLAGS_$(SOLARIS_VERSION))
-POSIX_CPPFLAGS += -D_XOPEN_SOURCE=500
 POSIX_LDLIBS += -lposix4 -lpthread $(POSIX_LDLIBS_$(SOLARIS_VERSION))
 
 OP_SYS_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) $(COMPILER_CPPFLAGS)

configure/os/CONFIG.Common.solaris-x86

@@ -21,7 +21,6 @@ COMPILER_LDFLAGS += -mt
 SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
 
 POSIX_CPPFLAGS += -D_POSIX_C_SOURCE=199506L $(POSIX_CPPFLAGS_$(SOLARIS_VERSION))
-POSIX_CPPFLAGS += -D_XOPEN_SOURCE=500
 POSIX_LDLIBS += -lposix4 -lpthread $(POSIX_LDLIBS_$(SOLARIS_VERSION))
 
 OP_SYS_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) $(COMPILER_CPPFLAGS)
@@ -53,6 +52,7 @@ OP_SYS_LDLIBS += -lsocket -lnsl
 OP_SYS_LDLIBS_8 += -ldl -lCrun -lc
 OP_SYS_LDLIBS_9 += -ldl -lCrun -lc
 OP_SYS_LDLIBS_10 += -lCrun -lc
+OP_SYS_LDLIBS_11 += -lCrun -lc
 OP_SYS_LDLIBS += $(OP_SYS_LDLIBS_$(SOLARIS_VERSION))
 OP_SYS_LDLIBS += $(STLPORT_LDLIBS_$(USE_STLPORT))
 

configure/os/CONFIG.Common.solaris-x86-gnu

@@ -17,4 +17,5 @@ STLPORT_LDLIBS_NO =
 OP_SYS_LDLIBS_8 = -ldl -lc
 OP_SYS_LDLIBS_9 = -ldl -lc
 OP_SYS_LDLIBS_10 = -lc
+OP_SYS_LDLIBS_11 = -lc
 

configure/os/CONFIG.Common.vxWorks-486

@@ -11,14 +11,13 @@
 include $(CONFIG)/os/CONFIG.Common.vxWorksCommon
 
 # Vx GNU cross compiler suffix
-CMPLR_SUFFIX = 386
+CMPLR_SUFFIX = pentium
  
-ARCH_CLASS = pc486
+ARCH_CLASS = x86
 
-ARCH_DEP_CPPFLAGS = -DCPU=I80486 -D_X86_ 
-ARCH_DEP_CFLAGS = -m486
-ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop
+ARCH_DEP_CPPFLAGS = -DCPU=I80486 -D_X86_
+ARCH_DEP_CFLAGS = -mtune=i486 -march=i486
+ARCH_DEP_CFLAGS += -fno-zero-initialized-in-bss -fno-defer-pop
 
 # Allow site overrides
 -include $(CONFIG)/os/CONFIG_SITE.Common.vxWorks-486

configure/os/CONFIG.Common.vxWorks-pentium

@@ -11,12 +11,14 @@
 include $(CONFIG)/os/CONFIG.Common.vxWorksCommon
 
 # Vx GNU cross compiler suffix
-CMPLR_SUFFIX = 386
- 
-ARCH_CLASS = pcPentium
+CMPLR_SUFFIX = pentium
 
-ARCH_DEP_CPPFLAGS = -DCPU=PENTIUM -D_X86_ 
-ARCH_DEP_CFLAGS = -mpentium
-ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop
+ARCH_CLASS = x86
+
+ARCH_DEP_CPPFLAGS = -DCPU=PENTIUM -D_X86_
+ARCH_DEP_CFLAGS = -mtune=pentium -march=pentium
+ARCH_DEP_CFLAGS += -fno-zero-initialized-in-bss -fno-defer-pop
+
+# Allow site overrides
+-include $(CONFIG)/os/CONFIG_SITE.Common.vxWorks-pentium
 

configure/os/CONFIG.Common.vxWorksCommon

@@ -93,6 +93,7 @@ VX_GNU_VERSION_6.5 = 3.4.4
 VX_GNU_VERSION_6.6 = 4.1.2
 VX_GNU_VERSION_6.7 = 4.1.2
 VX_GNU_VERSION_6.8 = 4.1.2
+VX_GNU_VERSION_6.9 = 4.3.3
 VX_GNU_VERSION = $(VX_GNU_VERSION_$(VXWORKS_VERSION))
 
 VX_GNU_MAJOR_VERSION = $(basename $(basename $(VX_GNU_VERSION)))
@@ -134,6 +135,7 @@ NM_DIR_6.5 = $(WORKBENCH_BIN)
 NM_DIR_6.6 = $(WORKBENCH_BIN)
 NM_DIR_6.7 = $(GNU_BIN)
 NM_DIR_6.8 = $(UTILITIES_BIN)
+NM_DIR_6.9 = $(UTILITIES_BIN)
 NM_DIR = $(firstword $(NM_DIR_$(VXWORKS_VERSION)) $(GNU_BIN))
 
 NM = $(NM_DIR)/$(CMPLR_PREFIX)nm$(CMPLR_SUFFIX)$(HOSTEXE)

configure/os/CONFIG.Common.win32-x86-cygwin

@@ -4,7 +4,7 @@
 # This file is maintained by the build community.
 #
 # Definitions for cygwin-x86 target builds
-# Sites may override these definitions in CONFIG_SITE.Common.cygwin-x86
+# Sites may override these definitions in CONFIG_SITE.Common.win32-x86-cygwin
 #-------------------------------------------------------
 
 # Include definitions common to all Unix targets

configure/os/CONFIG.Common.win32-x86-mingw

@@ -34,7 +34,8 @@ ARCH_DEP_LDFLAGS += -m32
 # Override for -DUNIX from CONFIG.Common.UnixCommon
 OP_SYS_CPPFLAGS = -D_MINGW
 
-EXE=.exe
+EXE = .exe
+RES = .coff
 
 VISC_DLL_NO = -DEPICS_DLL_NO
 VISC_DLL_YES =

configure/os/CONFIG.Common.windows-x64-mingw

@@ -0,0 +1,15 @@
+# CONFIG.Common.windows-x64-mingw
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-mingw target builds
+# Sites may override these definitions in CONFIG_SITE.Common.windows-x64-mingw
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.Common.win32-x86-mingw
+
+ARCH_CLASS = x64
+
+ARCH_DEP_CFLAGS = -m64
+ARCH_DEP_LDFLAGS = -m64

configure/os/CONFIG.cygwin-x86_64.Common

@@ -0,0 +1,10 @@
+# CONFIG.cygwin-x86_64.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for cygwin-x86_64 host archs
+# Sites may override these definitions in CONFIG_SITE.cygwin-x86_64.Common
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.cygwin-x86.Common

configure/os/CONFIG.cygwin-x86_64.cygwin-x86_64

@@ -0,0 +1,11 @@
+#  CONFIG.cygwin-x86_64.cygwin-x86_64
+#
+# $Revision-Id$
+#
+# Definitions for cygwin-x86_64 host - cygwin-x86_64 target builds
+# Sites may override these definitions in CONFIG_SITE.cygwin-x86_64.cygwin-x86_64
+#-------------------------------------------------------
+
+# Include common gnu compiler definitions
+include $(CONFIG)/os/CONFIG.cygwin-x86.cygwin-x86
+

configure/os/CONFIG.darwinCommon.darwinCommon

@@ -59,15 +59,17 @@ COMMANDLINE_LIBRARY=READLINE
 
 GNU_DIR = /usr
 
-CC = $(GNU_BIN)/cc
-CCC = $(GNU_BIN)/c++
+# Apple soft-links these compilers to clang/clang++
+CC = cc
+CCC = c++
+GNU = NO
 
 #
 # Darwin shared libraries
 #
 SHRLIB_VERSION = $(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)
 SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined suppress \
-       -install_name $(shell $(PERL) $(TOOLS)/fullPathName.pl $(INSTALL_LIB))/$@ \
+       -install_name $(shell $(FULLPATHNAME) $(INSTALL_LIB))/$@ \
        -compatibility_version $(EPICS_VERSION).$(EPICS_REVISION) \
        -current_version $(SHRLIB_VERSION)
 SHRLIB_SUFFIX_BASE = .dylib

configure/os/CONFIG.linux-arm-debug.Common

@@ -0,0 +1,12 @@
+# CONFIG.linux-arm-debug.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-arm-debug host builds
+# Override these settings in CONFIG_SITE.linux-arm-debug.Common
+#-------------------------------------------------------
+
+#Include definitions common to linux-arm hosts
+include $(CONFIG)/os/CONFIG.linux-arm.Common
+

configure/os/CONFIG.linux-arm-debug.linux-arm-debug

@@ -0,0 +1,14 @@
+# CONFIG.linux-arm-debug.linux-arm-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-arm-debug host and target build
+# Override these settings in CONFIG_SITE.linux-arm-debug.linux-arm-debug
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.linux-arm.linux-arm
+
+# Removes -O optimization and adds -g compile option
+HOST_OPT=NO
+

configure/os/CONFIG.linux-arm.linux-arm-debug

@@ -0,0 +1,15 @@
+# CONFIG.linux-arm.linux-arm-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for linux-arm host - linux-arm-debug target build
+# Override these settings in CONFIG_SITE.linux-arm.linux-arm-debug
+#-------------------------------------------------------
+
+-include $(CONFIG)/os/CONFIG.linux-arm.linux-arm
+-include $(CONFIG)/os/CONFIG_SITE.Common.linux-arm
+-include $(CONFIG)/os/CONFIG_SITE.linux-arm.linux-arm
+
+BUILD_CLASS=HOST
+HOST_OPT=NO

configure/os/CONFIG.linux-x86.linux-arm

@@ -1,10 +1,31 @@
 # CONFIG.linux-x86.linux-arm
 #
 # Definitions for linux-x86 host - linux-arm target builds
-# Sites may override these definitions in CONFIG_SITE.linux-x86.linux-arm
+# Override these settings in CONFIG_SITE.linux-x86.linux-arm
 #-------------------------------------------------------
 
-# Copied from x86.x86
+VALID_BUILDS = Ioc
+GNU_TARGET = arm-linux
+
+# prefix of compiler tools
+CMPLR_SUFFIX =
+CMPLR_PREFIX = $(addsuffix -,$(GNU_TARGET))
+
+# Provide a link-time path for shared libraries
+SHRLIBDIR_RPATH_LDFLAGS_YES += $(SHRLIB_DEPLIB_DIRS:%=-Wl,-rpath-link,%)
+SHRLIBDIR_LDFLAGS += $(SHRLIBDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
+
+# Provide a link-time path for products
+PRODDIR_RPATH_LDFLAGS_YES += $(PROD_DEPLIB_DIRS:%=-Wl,-rpath-link,%)
+PRODDIR_LDFLAGS += $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
+
+# Provide a link-time path for readline 
+RUNTIME_LDFLAGS_READLINE_YES = -Wl,-rpath-link,$(GNU_DIR)/lib
+RUNTIME_LDFLAGS_READLINE = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+RUNTIME_LDFLAGS_READLINE_CURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+RUNTIME_LDFLAGS_READLINE_NCURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+
+# Library flags
 STATIC_LDFLAGS_YES= -Wl,-Bstatic
 STATIC_LDFLAGS_NO= 
 STATIC_LDLIBS_YES= -Wl,-Bdynamic

configure/os/CONFIG.linux-x86.linux-arm-debug

@@ -0,0 +1,9 @@
+# CONFIG.linux-x86.linux-arm-debug
+#
+# Definitions for linux-x86 host - linux-arm-debug target builds
+# Override these settings in CONFIG_SITE.linux-x86.linux-arm-debug
+#-------------------------------------------------------
+
+# Include definitions for linux-arm targets
+include $(CONFIG)/os/CONFIG.linux-x86.linux-arm
+

configure/os/CONFIG.linux-x86.win32-x86-mingw

@@ -0,0 +1,22 @@
+# CONFIG.linux-x86.win32-x86-mingw
+#
+# Definitions for linux-x86 host win32-x86-mingw target builds
+# Override these definitions in CONFIG_SITE.linux-x86.win32-x86-mingw
+#-------------------------------------------------------
+
+# Include common gnu compiler definitions
+include $(CONFIG)/CONFIG.gnuCommon
+
+# Add resource compiler
+RCCMD = $(CMPLR_PREFIX)windres$(CMPLR_SUFFIX) $(INCLUDES) $< $@
+
+# Remove -fPIC flags, add out-implib
+SHRLIB_CFLAGS =
+SHRLIB_LDFLAGS = -shared -Wl,--out-implib,$(LIB_PREFIX)$*$(LIB_SUFFIX)
+LOADABLE_SHRLIB_LDFLAGS = -shared -Wl,--out-implib,$(LIB_PREFIX)$*$(LIB_SUFFIX)
+
+# Don't link with gcc library
+GNU_LDLIBS_YES =
+
+# Link with winsock2
+OP_SYS_LDLIBS = -lws2_32

configure/os/CONFIG.linux-x86_64.linux-arm

@@ -0,0 +1,8 @@
+# CONFIG.linux-x86_64.linux-arm
+#
+# Definitions for linux-x86_64 host - linux-arm target builds
+# Sites may override these definitions in CONFIG_SITE.linux-x86_64.linux-arm
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.linux-x86.linux-arm
+

configure/os/CONFIG.linux-x86_64.linux-arm-debug

@@ -0,0 +1,8 @@
+# CONFIG.linux-x86_64.linux-arm-debug
+#
+# Definitions for linux-x86_64 host - linux-arm-debug target builds
+# Override these settings in CONFIG_SITE.linux-x86_64.linux-arm-debug
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.linux-x86.linux-arm
+

configure/os/CONFIG.linux-x86_64.win32-x86-mingw

@@ -0,0 +1,9 @@
+# CONFIG.linux-x86_64.win32-x86-mingw
+#
+# Definitions for linux-x86_64 host win32-x86-mingw target builds
+# Override these definitions in CONFIG_SITE.linux-x86_64.win32-x86-mingw
+#-------------------------------------------------------
+
+# Settings as for the linux-x86 host architecture
+include $(CONFIG)/os/CONFIG.linux-x86.win32-x86-mingw
+

configure/os/CONFIG.solaris-sparc64.Common

@@ -3,7 +3,7 @@
 # $Revision-Id$
 # This file is maintained by the build community.
 #
-# Definitions for solaris-sparc Sun compiler host builds
+# Definitions for solaris-sparc64 Sun compiler host builds
 # Sites may override these definitions in CONFIG_SITE.solaris-sparc64.Common
 #-------------------------------------------------------
 

configure/os/CONFIG.solaris-sparc64.solaris-sparc64

@@ -3,7 +3,7 @@
 # $Revision-Id$
 # This file is maintained by the build community.
 #
-# Definitions for solaris-sparc Sun compiler host - solaris-sparc Sun compiler target builds
+# Definitions for solaris-sparc64 compiler host - solaris-sparc64 compiler target builds
 # Sites may override these definitions in CONFIG_SITE.solaris-sparc64.solaris-sparc64
 #-------------------------------------------------------
 

configure/os/CONFIG.solarisCommon.solarisCommon

@@ -3,13 +3,14 @@
 # $Revision-Id$
 # This file is maintained by the build community.
 #
-# Definitions for solaris-sparc host - solaris-sparc target build
-# Sites may override these definitions in CONFIG_SITE.solaris-sparc.solaris-sparc
+# Definitions for solaris host - solaris target build
+# Sites may override these definitions in CONFIG_SITE.solarisCommon.solarisCommon
 #-------------------------------------------------------
 
-SPARCWORKS = /opt/SUNWspro
 GNU = NO
 
+# SPARCWORKS path is set in a CONFIG_SITE file
+
 CC = $(SPARCWORKS)/bin/cc
 CCC = $(SPARCWORKS)/bin/CC
 CPP = $(CC) -E -Qn

configure/os/CONFIG.win32-x86-borland.win32-x86-borland

@@ -261,7 +261,7 @@ LINK.cpp += , $@ ,,$(LINKLIBS)  $(subst /,\\,$(PROD_LDLIBS))
 #--------------------------------------------------
 
 # override of CONFIG_COMMON
-HDEPENDS_INCLUDES_MKMF = $(filter-out $(BORLAND_INC),$(subst -I,,$(INCLUDES)))
+HDEPENDS_INCLUDES_MKMF = $(filter-out $(addprefix -I,$(BORLAND_INC)),$(INCLUDES))
 
 
 TDS = $(addsuffix .tds,$(basename $(PROD) $(TESTPROD) $(BUILD_LIBRARY)))

configure/os/CONFIG.win32-x86-mingw.Common

@@ -4,7 +4,7 @@
 # This file is maintained by the build community.
 #
 # Definitions for win32-x86-cygwin host archs
-# Sites may override these definitions in CONFIG_SITE.win32-x86-cygwin.Common
+# Sites may override these definitions in CONFIG_SITE.win32-x86-mingw.Common
 #-------------------------------------------------------
 
 #Include definitions common to unix hosts

configure/os/CONFIG.win32-x86-mingw.win32-x86-mingw

@@ -9,21 +9,27 @@
 # Include common gnu compiler definitions
 include $(CONFIG)/CONFIG.gnuCommon
 
-# gcc, g++, ar, ld, and ranlib must be in user's path
-CC = gcc
-CCC = g++
-AR = ar -rc
-LD = ld -r
-RANLIB = ranlib
-RES=.coff
-RCCMD = windres $(INCLUDES) $< $@
+# Undo various things set by CONFIG.gnuCommon
 
-# No -fPIC avoids "-fPIC ignored for target (all code is position independent)"
+CMPLR_PREFIX =
+
+# Remove $(GNU_BIN)/ path
+CC  = $(CMPLR_PREFIX)gcc
+CCC = $(CMPLR_PREFIX)g++
+AR  = $(CMPLR_PREFIX)ar -rc
+LD  = $(CMPLR_PREFIX)ld -r
+RANLIB = $(CMPLR_PREFIX)ranlib
+
+# Add resource compiler
+RCCMD = $(CMPLR_PREFIX)windres $(INCLUDES) $< $@
+
+# Remove -fPIC flags, add out-implib
 SHRLIB_CFLAGS =
 SHRLIB_LDFLAGS = -shared -Wl,--out-implib,$(LIB_PREFIX)$*$(LIB_SUFFIX)
 LOADABLE_SHRLIB_LDFLAGS = -shared -Wl,--out-implib,$(LIB_PREFIX)$*$(LIB_SUFFIX)
 
-# Override linking with gcc library from CONFIG.gnuCommon
+# Don't link with gcc library
 GNU_LDLIBS_YES =
 
-OP_SYS_LDLIBS = -lws2_32 
+# Link with winsock2
+OP_SYS_LDLIBS = -lws2_32

configure/os/CONFIG.win32-x86-static.Common

@@ -0,0 +1,11 @@
+# CONFIG.win32-x86-static.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for win32-x86-static host archs
+# Sites may override these definitions in CONFIG_SITE.win32-x86-static.Common
+#-------------------------------------------------------
+
+include  $(CONFIG)/os/CONFIG.win32-x86.Common
+

configure/os/CONFIG.win32-x86-static.win32-x86-static

@@ -0,0 +1,13 @@
+# CONFIG.win32-x86-static.win32-x86.static
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for win32-x86-static target archs when host arch is win32-x86-static
+# Sites may override these definitions in CONFIG_SITE.win32-x86-static.win32-x86-static
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.win32-x86.win32-x86
+
+SHARED_LIBRARIES = NO
+STATIC_BUILD = YES

configure/os/CONFIG.win32-x86.win32-x86

@@ -189,7 +189,8 @@ OP_SYS_CXXFLAGS = $(COMPILER_CXXFLAGS)
 #		'-entry:_DllMainCRTStartup$(DLLENTRY)'
 DLLENTRY = @12
 
-WIN32_DLLFLAGS = /subsystem:windows /dll $(OPT_LDFLAGS) $(USR_LDFLAGS) $(TARGET_LDFLAGS) $(LIB_LDFLAGS)
+WIN32_DLLFLAGS = /subsystem:windows /dll $(OPT_LDFLAGS) \
+ $(USR_LDFLAGS) $(CMD_LDFLAGS) $(TARGET_LDFLAGS) $(LIB_LDFLAGS)
 
 #
 # specify dll .def file only if it exists

configure/os/CONFIG.win32-x86.win32-x86-static

@@ -0,0 +1,14 @@
+# CONFIG.win32-x86.win32-x86-static
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for win32-x86-static target archs when host arch is win32-x86
+# Sites may override these definitions in CONFIG_SITE.win32-x86.win32-x86-static
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.win32-x86.win32-x86
+
+BUILD_CLASS = HOST
+SHARED_LIBRARIES = NO
+STATIC_BUILD = YES

configure/os/CONFIG.win32-x86.windows-x64

@@ -13,7 +13,7 @@
 ARCH_DEP_CPPFLAGS += /favor:blend
 #ARCH_DEP_CPPFLAGS += /Wp64
 
-#	/favor:blend	both AMD64 and INTEL64
+#	/favor:blend	both AMD64 and INTEL64  This is the default
 #	/favor:AMD64
 #	/favor:INTEL64 (new value)
 #	/favor:EN64T   (old value)

configure/os/CONFIG.windows-x64-mingw.Common

@@ -0,0 +1,11 @@
+# CONFIG.windows-x64-mingw.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-mingw host archs
+# Sites may override these definitions in CONFIG_SITE.windows-x64-mingw.Common
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.win32-x86-mingw.Common
+

configure/os/CONFIG.windows-x64-mingw.windows-x64-mingw

@@ -0,0 +1,11 @@
+# CONFIG.windows-x64-mingw.windows-x64-mingw
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-mingw target archs
+# Sites may override these definitions in CONFIG_SITE.windows-x64-mingw.windows-x64-mingw
+#-------------------------------------------------------
+
+# Include common gnu compiler definitions
+include $(CONFIG)/os/CONFIG.win32-x86-mingw.win32-x86-mingw

configure/os/CONFIG.windows-x64-static.Common

@@ -0,0 +1,11 @@
+# CONFIG.windows-x64-static.Common
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-static host archs
+# Sites may override these definitions in CONFIG_SITE.windows-x64-static.Common
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.windows-x64.Common
+

configure/os/CONFIG.windows-x64-static.windows-x64-static

@@ -0,0 +1,13 @@
+# CONFIG.windows-x64-static.windows-x64-static
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-static target archs when host arch is windows-x64-static
+# Sites may override these definitions in CONFIG_SITE.windows-x64-static.windows-x64-static
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.windows-x64.windows-x64
+
+SHARED_LIBRARIES = NO
+STATIC_BUILD= YES

configure/os/CONFIG.windows-x64.windows-x64-debug

@@ -0,0 +1,12 @@
+# CONFIG.windows-x64.windows-x64-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64 compiler host - windows-x64 debug compiler target builds
+# Sites may override these definitions in CONFIG_SITE.windows-x64.windows-x64-debug
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.windows-x64.windows-x64
+
+HOST_OPT=NO

configure/os/CONFIG.windows-x64.windows-x64-static

@@ -0,0 +1,14 @@
+# CONFIG.windows-x86.windows-x86-static
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for windows-x64-static target archs when host arch is windows-x64
+# Sites may override these definitions in CONFIG_SITE.windows-x64.windows-x64-static
+#-------------------------------------------------------
+
+include $(CONFIG)/os/CONFIG.windows-x64.windows-x64
+
+BUILD_CLASS = HOST
+SHARED_LIBRARIES = NO
+STATIC_BUILD = YES

configure/os/CONFIG_SITE.Common.RTEMS

@@ -1,25 +1,35 @@
+# CONFIG_SITE.Common.RTEMS
+#
+# $Revision-Id$
 #
 # Site-specific information for all RTEMS targets
-#
 #-------------------------------------------------------
 
 # Where to find RTEMS
 #
-RTEMS_VERSION=4.9.2
-RTEMS_BASE=/usr/local/rtems/rtems-$(RTEMS_VERSION)
+# APS:
+RTEMS_VERSION = 4.10.2
+RTEMS_BASE = /usr/local/vw/rtems/rtems-$(RTEMS_VERSION)
 
 # Cross-compile toolchain in $(RTEMS_TOOLS)/bin
 #
-RTEMS_TOOLS=$(RTEMS_BASE)
+RTEMS_TOOLS = $(RTEMS_BASE)
 
+# Link Generic System loadable objects instead of full executable.
+#
+# A GeSys object is similar to a shared library.  It can be (un)loaded
+# at runtime by the Generic System loader which is available as a
+# patch against RTEMS.
+USE_GESYS = NO
 
 # If you're using neither BOOTP/DHCP nor FLASH to pick up your IOC
-# network configuration you must uncomment and specify your Internet 
+# network configuration you must uncomment and specify your Internet
 # Domain Name here
 #
 #OP_SYS_CFLAGS += -DRTEMS_NETWORK_CONFIG_DNS_DOMAINNAME=<domainname>
 
-#
-# Specify your desired command-line-input library
+# Select the command-line-input library to use
 #
 COMMANDLINE_LIBRARY = EPICS
+#COMMANDLINE_LIBRARY = LIBTECLA
+#COMMANDLINE_LIBRARY = READLINE

configure/os/CONFIG_SITE.Common.cygwin-x86

@@ -7,4 +7,7 @@
 
 # If readline is installed uncomment the following line
 # to add command-line editing and history support
-COMMANDLINE_LIBRARY = READLINE
+#COMMANDLINE_LIBRARY = READLINE
+
+# Uncomment the following line if readline has problems
+#LDLIBS_READLINE= -lreadline -lcurses

configure/os/CONFIG_SITE.Common.cygwin-x86_64

@@ -0,0 +1,14 @@
+# CONFIG_SITE.Common.cygwin-x86_64
+#
+# $Revision-Id$
+#
+# Site Specific definitions for cygwin-x86_64 target
+# Only the local epics system manager should modify this file
+
+# If readline is installed uncomment the following line
+# to add command-line editing and history support
+#COMMANDLINE_LIBRARY = READLINE
+
+# Uncomment the following line if readline has problems
+#LDLIBS_READLINE = -lreadline -lcurses
+

configure/os/CONFIG_SITE.Common.darwin-x86

@@ -14,19 +14,19 @@ ARCH_CLASS = x86_64
 #ARCH_CLASS = i386 x86_64
 
 #
-# Comment out the following 3 lines to build with Apple's GCC instead of CLANG.
+# Uncomment the following 3 lines to build with Apple's GCC instead of CLANG.
 #
-CC  = clang
-CCC = clang++
-GNU = NO
+#CC  = gcc
+#CCC = g++
+#GNU = YES
 
 
-# To use MacPorts GCC, comment out ALL the settings above this line,
-# then uncomment (and modify if necessary) the following instead:
+# To use MacPorts GCC uncomment (and modify if necessary) the following:
 
 #GNU_DIR = /opt/local
 #CC = $(GNU_BIN)/gcc -m64
 #CCC = $(GNU_BIN)/g++ -m64
+#GNU = YES
 
 # If you see this or similar errors while building in the src/cap5 directory
 #   gcc: error: unrecognized option '-no-cpp-precomp'

configure/os/CONFIG_SITE.Common.ios-arm

@@ -16,11 +16,17 @@
 #
 #   Xcode 4.5 dropped support for the ARMv6.
 #
-#   ARMv7s devices: iPhone 5
-#   ARMv6 devices: iPhone 1 and 3G, iPod Touch Gen 1 and 2
-#   All other devices are ARMv7
+#   arm64 devices:  iPhone 5S, 6 and 6 Plus, iPad Air Gen 1 and 2,
+#                   iPad Mini Gen 2 and 3
+#   armv7s devices: iPhone 5 and 5C, iPad Gen 4
+#   armv7 devices:  iPhone 3GS, 4 and 4S, iPod Touch Gen 3 to 5
+#                   iPad Gen 1 to 3, iPad Mini, Apple TV Gen 2 and 3
+#   armv6 devices:  iPhone 1 and 3G, iPod Touch Gen 1 and 2
 
-ARCH_CLASS = armv7 armv7s
+#ARCH_CLASS = arm64
+#ARCH_CLASS = armv7s arm64
+ARCH_CLASS = armv7 armv7s arm64
+#ARCH_CLASS = armv7 armv7s
 #ARCH_CLASS = armv7
 #ARCH_CLASS = armv6 armv7
 #ARCH_CLASS = armv6

configure/os/CONFIG_SITE.Common.ios-x86

@@ -0,0 +1,18 @@
+# CONFIG_SITE.Common.ios-x86
+#
+# $Revision-Id$
+#
+# Site-specific settings for ios-x86 target builds
+#-------------------------------------------------------
+
+# Which x86 instruction set(s) to generate code for:
+#   The iPhone Simulator now supports both 32-bit and 64-bit
+#   instruction sets since the iPhone 6 uses a 64-bit CPU.
+#
+#   Apple's compilers can build for multiple architectures,
+#   generating a Universal binary.  This is larger and takes
+#   longer to compile, but runs efficiently on all devices.
+
+#ARCH_CLASS = i386
+ARCH_CLASS = i386 x86_64
+#ARCH_CLASS = x86_64

configure/os/CONFIG_SITE.Common.iosCommon

@@ -5,19 +5,24 @@
 # Site-specific settings for Apple iOS builds
 #-------------------------------------------------------
 
-# iOS Version number
+# Minimum version of iOS the executables must run on.
+# Earlier versions may work, if XCode supports them.
 
-#IOS_VERSION = 3.2
-#IOS_VERSION = 4.1
-#IOS_VERSION = 4.2
-#IOS_VERSION = 4.3
-#IOS_VERSION = 5.0
-#IOS_VERSION = 5.1
-IOS_VERSION = 6.0
+#IOS_DEPLOYMENT_TARGET = 5.0
+#IOS_DEPLOYMENT_TARGET = 5.1
+#IOS_DEPLOYMENT_TARGET = 6.0
+#IOS_DEPLOYMENT_TARGET = 6.1
+#IOS_DEPLOYMENT_TARGET = 7.0
+#IOS_DEPLOYMENT_TARGET = 7.1
+IOS_DEPLOYMENT_TARGET = 8.0
+#IOS_DEPLOYMENT_TARGET = 8.1
+
+# Older versions of Xcode may require this SDK_DIR definition
+#SDK_DIR = $(PLATFORM_DIR)/Developer/SDKs/$(IOS_PLATFORM)$(IOS_DEPLOYMENT_TARGET).sdk
 
 
 # Which compiler to use:
-#   CLANG is preferred for recent versions of Xcode
+#   CLANG is required for Xcode 5.0 and later
 #   LLVM_GNU uses the llvm-gcc and llvm-g++ compilers
 #   GNU is needed for older versions of Xcode
 

configure/os/CONFIG_SITE.Common.linux-arm

@@ -0,0 +1,41 @@
+# CONFIG_SITE.Common.linux-arm
+#
+# $Revision-Id$
+#
+# Site Specific definitions for all linux-arm targets
+#-------------------------------------------------------
+
+# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
+# shared libraries will be found automatically.  However if the .so
+# files are installed at a different path to their compile-time path
+# then in order to be found at runtime do one of these:
+# a) LD_LIBRARY_PATH must include the full absolute pathname to
+#    $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when invoking base
+#    executables.
+# b) Add the runtime path to SHRLIB_DEPLIB_DIRS and PROD_DEPLIB_DIRS, which 
+#    will add the named directory to the list contained in the executables.
+# c) Add the runtime path to /etc/ld.so.conf and run ldconfig
+#    to inform the system of the shared library location.
+
+# Depending on your version of Linux you'll want one of the following
+# lines to enable command-line editing and history in iocsh.  If you're
+# not sure which, start with the top one and work downwards until the
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
+
+# No other libraries needed (recent Fedora, Ubuntu etc.):
+#COMMANDLINE_LIBRARY = READLINE
+
+# Needs -lncurses (RHEL 5 etc.):
+#COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# Needs -lcurses (older versions)
+#COMMANDLINE_LIBRARY = READLINE_CURSES
+
+
+# It makes sense to include debugging symbols even in optimized builds
+# in case you want to attach gdb to the process or examine a core-dump.
+# This does cost disk space, but not memory as debug symbols are not
+# loaded into RAM when the binary is loaded.
+OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.linux-x86

@@ -38,3 +38,4 @@ COMMANDLINE_LIBRARY = READLINE
 # This does cost disk space, but not memory as debug symbols are not
 # loaded into RAM when the binary is loaded.
 OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.linux-x86_64

@@ -38,3 +38,4 @@ COMMANDLINE_LIBRARY = READLINE
 # This does cost disk space, but not memory as debug symbols are not
 # loaded into RAM when the binary is loaded.
 OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.linux-xscale_be

@@ -1,9 +1,12 @@
 # CONFIG_SITE.Common.linux-xscale_be
 #
+# $Revision-Id$
+#
 # Site specific definitions for linux-xscale_be target builds.
 #-------------------------------------------------------
 
 # Set GNU_DIR to point to directory containing the tool-chain
 
-GNU_DIR = /usr/local/xscale_be
+# APS:
+GNU_DIR = /usr/local/vw/xscale_be
 

configure/os/CONFIG_SITE.Common.solaris-sparc

@@ -5,11 +5,12 @@
 # Site Specific definitions for solaris-sparc target
 # Only the local epics system manager should modify this file
 
-# If readline is installed uncomment the following macro definition
-# to include command-line editing and history support
-#
+# location of the Solaris Studio (was SunPro) compilers
+SPARCWORKS = /opt/SUNWspro
+#SPARCWORKS = /opt/solarisstudio12.3
 
-# Readline library provides command-line editing and history in IOC shell
+# If readline is installed, uncomment the following macro definition
+# to use it for command-line editing and history support
 #COMMANDLINE_LIBRARY = READLINE
 
 # Use stLport library instead of default Cstd library

configure/os/CONFIG_SITE.Common.solaris-x86

@@ -0,0 +1,11 @@
+# CONFIG_SITE.Common.solaris-x86
+#
+# $Revision-Id$
+#
+# Site Specific definitions for solaris-x86 targets
+# Only the local epics system manager should modify this file
+
+# location of the Solaris Studio (was SunPro) compilers
+SPARCWORKS = /opt/SUNWspro
+#SPARCWORKS = /opt/solarisstudio12.3
+

configure/os/CONFIG_SITE.Common.solaris-x86_64

@@ -5,7 +5,7 @@
 # Site Specific definitions for solaris-x86_64 target
 # Only the local epics system manager should modify this file
 
-# Include definitions common to all solaris-x86_64 target archs
+# Include definitions common to all solaris-x86 target archs
 -include $(CONFIG)/os/CONFIG_SITE.Common.solaris-x86
 
 COMMANDLINE_LIBRARY = EPICS

configure/os/CONFIG_SITE.Common.vxWorksCommon

@@ -20,6 +20,7 @@ VXWORKS_VERSION = 5.5
 #VXWORKS_VERSION = 6.6
 #VXWORKS_VERSION = 6.7
 #VXWORKS_VERSION = 6.8
+#VXWORKS_VERSION = 6.9
 
 
 # Sites may override the following path for a particular host
@@ -40,6 +41,7 @@ WIND_BASE = /usr/local/vw/tornado22-$(ARCH_CLASS)
 #WORKBENCH_VERSION = 2.6
 #WORKBENCH_VERSION = 3.0
 #WORKBENCH_VERSION = 3.2
+#WORKBENCH_VERSION = 3.3
 
 
 # Utilities Version number, required from vxWorks 6.8 and later

configure/os/CONFIG_SITE.Common.win32-x86-cygwin

@@ -2,6 +2,6 @@
 #
 # $Revision-Id$
 #
-# Site Specific definitions for cygwin-x86 target
+# Site Specific definitions for win32-x86-cygwin target
 # Only the local epics system manager should modify this file
 

configure/os/CONFIG_SITE.Common.win32-x86-mingw

@@ -1,11 +1,9 @@
-# CONFIG_SITE.win32-x86-mingw.Common
+# CONFIG_SITE.Common.win32-x86-mingw
 #
 # $Revision-Id$
 #
-# Site Specific definitions for cygwin-x86 target
-# Only the local epics system manager should modify this file
+# Site Specific definitions for win32-x86-mingw target
 
-# If readline is not installed comment the following line
-# to omit command-line editing and history support
+# If readline is available uncomment the following line
+# to enable command-line editing and history support
 #COMMANDLINE_LIBRARY = READLINE
-

configure/os/CONFIG_SITE.linux-arm-debug.linux-arm-debug

@@ -0,0 +1,13 @@
+# CONFIG_SITE.linux-arm-debug.linux-arm-debug
+#
+# $Revision-Id$
+#
+# Site specific overrides for linux-arm-debug host and target builds
+#-------------------------------------------------------
+
+#Prepares the object code to collect data for profiling with prof. 
+#PROFILE=YES
+
+#Compiles for profiling with the gprof profiler.
+#GPROF=YES
+

configure/os/CONFIG_SITE.linux-x86-debug.linux-x86-debug

@@ -1,3 +1,9 @@
+# CONFIG_SITE.linux-x86-debug.linux-x86-debug
+#
+# $Revision-Id$
+#
+# Site specific overrides for linux-x86-debug host and target builds
+#-------------------------------------------------------
 
 #Prepares the object code to collect data for profiling with prof. 
 #PROFILE=YES

configure/os/CONFIG_SITE.linux-x86.linux-arm

@@ -1,4 +1,4 @@
-#  CONFIG_SITE.linux-x86.linux-arm
+# CONFIG_SITE.linux-x86.linux-arm
 #
 # $Revision-Id$
 #
@@ -8,7 +8,8 @@
 # Tools install path
 #GNU_DIR = /home/targetOS/linux-arm/host/x86-linux/gcc_3.3.3
 
-GNU_DIR = /net/phoebus/vw/zynq-2011.09
+# APS:
+GNU_DIR = /usr/local/vw/zynq-2011.09
 
 # GNU crosscompiler target name
 GNU_TARGET = arm-xilinx-linux-gnueabi

configure/os/CONFIG_SITE.linux-x86.linux-arm-debug

@@ -0,0 +1,9 @@
+# CONFIG_SITE.linux-x86.linux-arm-debug
+#
+# $Revision-Id$
+#
+# Site specific settings for linux-x86 host - linux-arm-debug target builds
+#-------------------------------------------------------
+
+# Inherit settings from linux-arm
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-arm

configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw

@@ -0,0 +1,23 @@
+# CONFIG_SITE.linux-x86.win32-x86-mingw
+#
+# Configuration for linux-x86 host win32-x86-mingw target builds
+#-------------------------------------------------------
+
+# Early versions of the MinGW cross-build tools can only build
+# static (non-DLL) libraries. Fedora's cross-build of gcc 4.4.6
+# needs these uncommented, other distributions have not been
+# tested with this release of Base:
+SHARED_LIBRARIES = NO
+STATIC_BUILD = YES
+
+# The cross-build tools are in $(GNU_DIR)/bin
+# Default is /usr
+#GNU_DIR = /usr/local
+
+# Different distribution cross-build packages use different prefixes:
+# Ubuntu:
+#CMPLR_PREFIX = i686-w64-mingw32-
+# RHEL:
+CMPLR_PREFIX = i686-pc-mingw32-
+# Debian?
+#CMPLR_PREFIX = i586-mingw32msvc-

configure/os/CONFIG_SITE.linux-x86_64-debug.linux-x86_64-debug

@@ -2,10 +2,8 @@
 #
 # $Revision-Id$
 #
-# Site specific override definitions for solaris-sparc host builds
-# Only the local epics system manager should modify this file
-
-
+# Site specific overrides for linux-x86_64 host and target builds
+#-------------------------------------------------------
 
 #Prepares the object code to collect data for profiling with prof. 
 #PROFILE=YES

configure/os/CONFIG_SITE.linux-x86_64.linux-arm

@@ -0,0 +1,9 @@
+# CONFIG_SITE.linux-x86_64.linux-arm
+#
+# $Revision-Id$
+#
+# Site specific settings for linux-x86_64 host - linux-arm target builds
+#-------------------------------------------------------
+
+# Inherit setting from linux-x86
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-arm

configure/os/CONFIG_SITE.linux-x86_64.linux-arm-debug

@@ -0,0 +1,9 @@
+# CONFIG_SITE.linux-x86_64.linux-arm-debug
+#
+# $Revision-Id$
+#
+# Site specific settings for linux-x86_64 host - linux-arm-debug target builds
+#-------------------------------------------------------
+
+# Inherit settings from linux-arm
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-arm

configure/os/CONFIG_SITE.linux-x86_64.win32-x86-mingw

@@ -0,0 +1,8 @@
+# CONFIG_SITE.linux-x86_64.win32-x86-mingw
+#
+# Configuration for linux-x86_64 host win32-x86-mingw target builds
+#-------------------------------------------------------
+
+# Inherit from the linux-x86 host architecture
+include $(CONFIG)/os/CONFIG_SITE.linux-x86.win32-x86-mingw
+

configure/os/CONFIG_SITE.solaris-sparc.Common

@@ -4,7 +4,4 @@
 #
 # Site specific override definitions for solaris-sparc host builds
 # Only the local epics system manager should modify this file
- 
-#INSTALL_LOCATION = /home/phoebus/JBA/testBaseNew
 
-#CROSS_COMPILER_TARGET_ARCHS += vxWorks-ppc604 vxWorks-ppc603 vxWorks-68040

configure/os/CONFIG_SITE.win32-x86-mingw.win32-x86-mingw

@@ -3,15 +3,9 @@
 # $Revision-Id$
 #
 # Site Specific definitions for win32-x86-mingw target
-# Only the local epics system manager should modify this file
 
+# The MinGW bin directory must be in your path.
 
-# Uncomment the following settings for MinGW_w32 releases
-# <MinGW directory>/bin should be in your path
-#CMPLR_PREFIX=i686-w64-mingw32-
-#CC = $(CMPLR_PREFIX)gcc
-#CCC = $(CMPLR_PREFIX)g++
-#AR = $(CMPLR_PREFIX)ar -rc
-#LD = $(CMPLR_PREFIX)ld -r
-#RANLIB = $(CMPLR_PREFIX)ranlib
-
+# Set the compiler prefix for your MinGW installation
+#CMPLR_PREFIX = i686-w64-mingw32-
+#CMPLR_PREFIX = i586-mingw32msvc-

configure/os/CONFIG_SITE.windows-x64-mingw.windows-x64-mingw

@@ -0,0 +1,9 @@
+# CONFIG_SITE.windows-x64-mingw.windows-x64-mingw
+#
+# $Revision-Id$
+#
+# Site Specific definitions for windows-x64-mingw target
+# Only the local epics system manager should modify this file
+
+# Prefix for mingw compiler from cygwin
+#CMPLR_PREFIX = x86_64-w64-mingw32-

documentation/README.1st

@@ -100,7 +100,7 @@
      later.
 
      GNU readline or Tecla library
-     GNU readline and Tecla librararies can be used by the IOC shell to
+     GNU readline and Tecla libraries can be used by the IOC shell to
      provide command line editing and command line history recall and edit.
      GNU readline (or Tecla library) must be installed on your target system
      when COMMANDLINE_LIBRARY is set to READLINE (or TECLA) for that target.
@@ -124,7 +124,7 @@
      EPICS documentation is available through the [3]EPICS website at
      Argonne.
 
-     Release specific documenataion can also be found in the
+     Release specific documentation can also be found in the
      base/documentation directory of the distribution.
 
   Directory Structure
@@ -137,7 +137,7 @@
          base/configure               Operating system independent build config files
          base/configure/os            Operating system dependent build config files
          base/configure/tools         Perl and shell scripts used in the build
-         base/documentation           Distributation documentation
+         base/documentation           Distribution documentation
          base/src                     All epics base source code in subdirectories
          base/src/RTEMS               Code to configure RTEMS for EPICS
          base/src/as                  Access security
@@ -170,7 +170,7 @@
          base/src/libCom/macLib       Macro substitution handler
          base/src/libCom/misc         Miscellaneous utilities
          base/src/libCom/osi          Operating system independent API
-         base/src/libCom/osi/os       Operating system dependant code in subdirectories
+         base/src/libCom/osi/os       Operating system dependent code in subdirectories
          base/src/libCom/ring         Methods for creating and using ring buffers
          base/src/libCom/taskwd       Task watchdog
          base/src/libCom/test         Test tools (timer, semBinary, semMutex,fdmgr, ...)
@@ -206,14 +206,14 @@
 
   Build related components
 
-    base/documentation/README* files
+    base/documentation directory - contains setup, build, and install documents
 
          README.1st           Instructions for setup and building epics base
          README.html          html version of README.1st
-         README.WIN32         Microsoft WIN32 specific instructions
-         README.cxxTemplates  Information about C++ templates in EPICS base
+         README.MS_Windows    Microsoft Windows specific instructions
+         README.cris          Axis CRIS specific instructions
+         README.darwin.html   Installation notes for OS X (Darwin)
          README.niCpu030      NI cpu030 specific instructions
-         README.darwin        Installation notes for Mac OS X (Darwin)
          RELEASE_NOTES.html   Notes on release changes
          KnownProblems.html   List of known problems and workarounds
          Converting*To*.html  Release specific conversion instructions
@@ -240,7 +240,7 @@
          CONFIG_BASE_VERSION   Definitions for EPICS base version number
          CONFIG_COMMON         Definitions common to all builds
          CONFIG_ENV            Definitions of EPICS environment variables
-         CONFIG_SITE           Site specific make defintions
+         CONFIG_SITE           Site specific make definitions
          CONFIG_SITE_ENV       Site defaults for EPICS environment variables
          MAKEFILE              Installs CONFIG* RULES* creates
          CONFIG_APP_INCLUDE
@@ -271,7 +271,7 @@
     base/src/tools directory - contains Perl scripts used for the build
 
          Makefile                Makefile for installing the scripts into cfg dir
-         convertRelease.pl       Performs consistancy checks on RELEASE files
+         convertRelease.pl       Performs consistency checks on RELEASE files
          cvsclean.pl             Remove all .#* files in directory tree
          dos2unix.pl             Converts text file from DOS CR/LF to unix ISO
          expandvars.pl           Tool to expand @VAR@ variables while copying a file

documentation/README.html

@@ -1,4 +1,7 @@
 <!DOCTYPE HTML>
+<!-- Generate the README.1st file from this file using:
+    elinks -dump -no-numbering -no-references -dump-width 80 README.html
+  -->
 <HTML>
 <HEAD>
 <TITLE>README - EPICS Base Installation Instructions</TITLE>
@@ -102,7 +105,7 @@
  For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or later.</P>
 
 <P><B>GNU readline or Tecla library</B><BR>
- GNU readline and Tecla librararies can be used by the IOC shell to
+ GNU readline and Tecla libraries can be used by the IOC shell to
  provide command line editing and command line history recall and edit.
  GNU readline (or Tecla library) must be installed on your target system
  when COMMANDLINE_LIBRARY is set to READLINE (or TECLA) for that target.
@@ -124,7 +127,7 @@
 <H3><A NAME="0_0_8"> Documentation</A></H3>
 <BLOCKQUOTE>EPICS documentation is available through the
  <a href="http://www.aps.anl.gov/epics/">EPICS website</a> at Argonne.
- <P>Release specific documenataion can also be found in the base/documentation
+ <P>Release specific documentation can also be found in the base/documentation
  directory of the distribution.</BLOCKQUOTE>
 
 <H3><A NAME="0_0_10"> Directory Structure</A></H3>
@@ -137,7 +140,7 @@
         base/configure               Operating system independent build config files
         base/configure/os            Operating system dependent build config files
         base/configure/tools         Perl and shell scripts used in the build
-        base/documentation           Distributation documentation
+        base/documentation           Distribution documentation
         base/src                     All epics base source code in subdirectories
         base/src/RTEMS               Code to configure RTEMS for EPICS
         base/src/as                  Access security
@@ -170,7 +173,7 @@
         base/src/libCom/macLib       Macro substitution handler
         base/src/libCom/misc         Miscellaneous utilities
         base/src/libCom/osi          Operating system independent API
-        base/src/libCom/osi/os       Operating system dependant code in subdirectories
+        base/src/libCom/osi/os       Operating system dependent code in subdirectories
         base/src/libCom/ring         Methods for creating and using ring buffers
         base/src/libCom/taskwd       Task watchdog
         base/src/libCom/test         Test tools (timer, semBinary, semMutex,fdmgr, ...)
@@ -210,14 +213,15 @@
 <H3><A NAME="0_0_11"> Build related components</A></H3>
 <BLOCKQUOTE>
 
-<H4>base/documentation/README* files</H4>
+<H4>base/documentation directory - contains setup, build, and install
+ documents</H4>
  <PRE>
         README.1st           Instructions for setup and building epics base
         README.html          html version of README.1st
-        README.WIN32         Microsoft WIN32 specific instructions
-        README.cxxTemplates  Information about C++ templates in EPICS base
+        README.MS_Windows    Microsoft Windows specific instructions
+        README.cris          Axis CRIS specific instructions
+        README.darwin.html   Installation notes for OS X (Darwin)
         README.niCpu030      NI cpu030 specific instructions
-        README.darwin        Installation notes for Mac OS X (Darwin)
         RELEASE_NOTES.html   Notes on release changes
         KnownProblems.html   List of known problems and workarounds
         Converting*To*.html  Release specific conversion instructions
@@ -246,7 +250,7 @@
         CONFIG_BASE_VERSION   Definitions for EPICS base version number
         CONFIG_COMMON         Definitions common to all builds
         CONFIG_ENV            Definitions of EPICS environment variables
-        CONFIG_SITE           Site specific make defintions
+        CONFIG_SITE           Site specific make definitions
         CONFIG_SITE_ENV       Site defaults for EPICS environment variables
         MAKEFILE              Installs CONFIG* RULES* creates
         CONFIG_APP_INCLUDE
@@ -279,7 +283,7 @@
 <H4>base/src/tools directory - contains Perl scripts used for the build</H4>
 <PRE>
         Makefile                Makefile for installing the scripts into cfg dir
-        convertRelease.pl       Performs consistancy checks on RELEASE files
+        convertRelease.pl       Performs consistency checks on RELEASE files
         cvsclean.pl             Remove all .#* files in directory tree
         dos2unix.pl             Converts text file from DOS CR/LF to unix ISO
         expandvars.pl           Tool to expand @VAR@ variables while copying a file