Creating 3.14.12.2-rc1

Set version number, update release notes.

LICENSE

@@ -1,11 +1,14 @@
-Copyright (c) 1991-2007 UChicago Argonne LLC and The Regents of the
-University of California. All rights reserved.
+Copyright (c) 1991-2011 UChicago Argonne LLC.
+Copyright (c) 1991-2006 The Regents of the University of California.
+Copyright (c) 2006-2011. Los Alamos National Security, LLC. Some of this
+material was produced under U.S. Government contract DE-AC52-06NA25396
+for Los Alamos National Laboratory (LANL), which is operated by Los Alamos
+National Security, LLC for the U.S. Department of Energy.
 
 EPICS BASE is distributed subject to the following license conditions:
 
  SOFTWARE LICENSE AGREEMENT
  Software: EPICS BASE
- Versions: 3.13.7 and higher
 
  1. The "Software", below, refers to EPICS BASE (in either source code, or
     binary form and accompanying documentation). Each licensee is

configure/CONFIG_ADDONS

@@ -1,5 +1,5 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
@@ -34,6 +34,7 @@
 #    LIBSRCS       source files for building libraries (deprecated)
 #    PROD_OBJS     object files for building prods
 #    LIB_OBJS      object files for building libraries
+#    USR_OBJS      object files for building libraries and prods
 #    USR_LIBS      libs needed by PROD and TESTPROD and LIBRARY
 #    PROD_LIBS     libs needed by PROD and TESTPROD
 #    LIB_LIBS      libs needed by shared LIBRARY

configure/CONFIG_BASE_VERSION

@@ -1,5 +1,5 @@
 #*************************************************************************
-# Copyright (c) 2010 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
@@ -19,26 +19,26 @@
 
 BASE_3_14=YES
 
-# EPICS_VERSION must be a number >0 and <256 
+# EPICS_VERSION must be a number >0 and <256
 EPICS_VERSION = 3
 
-# EPICS_REVISION must be a number >=0 and <256 
+# EPICS_REVISION must be a number >=0 and <256
 EPICS_REVISION = 14
 
-# EPICS_MODIFICATION must be a number >=0 and <256 
+# EPICS_MODIFICATION must be a number >=0 and <256
 EPICS_MODIFICATION = 12
 
 # EPICS_PATCH_LEVEL must be a number  (win32 resource file requirement)
 # Not included if zero
-EPICS_PATCH_LEVEL = 0
+EPICS_PATCH_LEVEL = 2
 
 # This will end in -DEV between official releases
 #EPICS_DEV_SNAPSHOT=-DEV
 #EPICS_DEV_SNAPSHOT=-pre1
-#EPICS_DEV_SNAPSHOT=-pre1-DEV
-EPICS_DEV_SNAPSHOT=-pre2
+#PICS_DEV_SNAPSHOT=-pre1-DEV
+#EPICS_DEV_SNAPSHOT=-pre2
 #EPICS_DEV_SNAPSHOT=-pre2-DEV
-#EPICS_DEV_SNAPSHOT=-rc1
+EPICS_DEV_SNAPSHOT=-rc1
 #EPICS_DEV_SNAPSHOT=-rc1-DEV
 #EPICS_DEV_SNAPSHOT=-rc2
 #EPICS_DEV_SNAPSHOT=-rc2-DEV

configure/CONFIG_COMMON

@@ -1,10 +1,9 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
+# EPICS BASE is distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
@@ -82,7 +81,8 @@ COMMON_DIR = ../O.Common
 
 #-------------------------------------------------------
 # Make echo output - suppress echoing if make's '-s' flag is set
-ECHO := $(if $(findstring s,$(MAKEFLAGS)),\#,@echo)
+COMMENT = \#
+ECHO = @$(if $(findstring s,$(patsubst T_A=%,,$(MAKEFLAGS))),$(COMMENT),echo)
 
 #-------------------------------------------------------
 ifdef T_A
@@ -258,6 +258,7 @@ LOADABLE_SHRLIB_SUFFIX=$(SHRLIB_SUFFIX)
 COMMANDLINE_LIBRARY = EPICS
 OP_SYS_LDLIBS += $(LDLIBS_$(COMMANDLINE_LIBRARY))
 OP_SYS_LDFLAGS += $(LDFLAGS_$(COMMANDLINE_LIBRARY))
+RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(COMMANDLINE_LIBRARY))
 
 #--------------------------------------------------
 # Flags
@@ -334,7 +335,7 @@ HDEPENDS_CFLAGS = $(HDEPENDS_CFLAGS_$(HDEPENDS))
 #--------------------------------------------------
 # depends definition
 
-TARGET_SRCS = $(foreach name, $(TESTPROD) $(PROD) $(LIBRARY), $($(name)_SRCS))
+TARGET_SRCS = $(foreach name, $(TESTPROD) $(PROD) $(LIBRARY) $(LOADABLE_LIBRARY), $($(name)_SRCS))
 SRC_FILES = $(LIB_SRCS) $(LIBSRCS) $(SRCS) $(USR_SRCS) $(PROD_SRCS) $(TARGET_SRCS)
 HDEPENDS_FILES_YES = $(addsuffix $(DEP),$(notdir $(basename $(SRC_FILES))))
 HDEPENDS_FILES = $(if $(filter NO,$(HDEPENDS)),,$(HDEPENDS_FILES_YES))

configure/CONFIG_SITE

@@ -78,12 +78,15 @@
 #       vxWorks-68040lc
 #       vxWorks-68060
 #       vxWorks-pentium
+#       vxWorks-ppc32           (32-bit PowerPC CPUs with full FPU)
+#       vxWorks-ppc32sf         (32-bit PowerPC CPUs without FPU)
 #       vxWorks-ppc603
 #       vxWorks-ppc603_long
 #       vxWorks-ppc604
 #       vxWorks-ppc604_long
 #       vxWorks-ppc604_altivec
 #       vxWorks-mpc8540
+#       vxWorks-mpc8548
 #       RTEMS-at91rm9200ek
 #       RTEMS-beatnik
 #       RTEMS-gen68360
@@ -103,7 +106,7 @@
 # override 
 #
 CROSS_COMPILER_TARGET_ARCHS=
-#CROSS_COMPILER_TARGET_ARCHS=vxWorks-68040
+#CROSS_COMPILER_TARGET_ARCHS=vxWorks-ppc32
 
 #  If only a subset of the host architectures perform
 #  the build for the CROSS_COMPILER_TARGET_ARCHS

configure/RULES.Db

@@ -1,10 +1,9 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
+# EPICS BASE is distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #RULES.Db
@@ -23,8 +22,8 @@ vpath %.acs $(USR_VPATH) $(GENERIC_SRC_DIRS) $(COMMON_DIR)
 ##################################################### dbdflags
 
 # dbExpand
-INSTALL_DBDFLAGS += -I $(INSTALL_LOCATION)/dbd
-INSTALL_DBFLAGS += -I $(INSTALL_LOCATION)/db
+INSTALL_DBDFLAGS += -I $(INSTALL_DBD)
+INSTALL_DBFLAGS += -I $(INSTALL_DB)
 DBDFLAGS = $(USR_DBDFLAGS) -I . -I .. $(INSTALL_DBDFLAGS) $(RELEASE_DBDFLAGS)
 DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) -I. -I.. $(INSTALL_DBFLAGS) $(RELEASE_DBFLAGS)
 
@@ -48,7 +47,7 @@ DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) -I. -I.. $(INSTALL_DBFLAGS) $(RELEASE_DBF
 # Following line added for backward compatibilty
 DBD += $(DBDNAME)
 
-DBDINC_NAME = $(patsubst %.h,%,$(patsubst %.db,%,$(DBDINC)))
+DBDINC_NAME = $(patsubst %.h,%,$(patsubst %.dbd,%,$(DBDINC)))
 DBD += $(addsuffix .dbd,$(DBDINC_NAME))
 INC += $(addsuffix .h,$(DBDINC_NAME))
 
@@ -109,7 +108,8 @@ ACF_CMD = $(CPP) $(ACF_CPPFLAGS) $(ACF_INCLUDES) $< > $@
 HINC += $(addsuffix .h,$(DBDINC_NAME))
 COMMON_DBDINC += $(addprefix $(COMMON_DIR)/,$(HINC))
 
-DBDDEPENDS_FILES += $(addsuffix $(DEP),$(HINC) $(DBS) \
+DBDDEPENDS_FILES += $(addsuffix $(DEP),$(HINC) \
+                    $(patsubst $(COMMON_DIR)/%,%,$(COMMON_DBS)) \
                     $(patsubst $(COMMON_DIR)/%,%,$(COMMON_DBDS)))
 
 DBDDEPENDS_FLAGS = $(subst -I,,$(filter-out -S%,$(DBDFLAGS)))
@@ -121,7 +121,7 @@ MAKEDBDEPENDS = $(PERL) $(TOOLS)/makeDbDepends.pl
 
 ifndef T_A
 
-ECHO := $(if $(findstring s,$(MAKEFLAGS)),\#,@echo)
+ECHO := $(if $(findstring s,$(MAKEFLAGS)),$(COMMENT),@echo)
 COMMON_DIR = .
 INSTALL_DBDS =
 INSTALL_DBS =
@@ -223,58 +223,65 @@ $(INSTALL_DB)/%.template: %.template
 $(COMMON_DIR)/%Record.h: $(COMMON_DIR)/%Record.dbd
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
-	@$(RM) $@
-	$(DBTORECORDTYPEH) $(DBDFLAGS)  $< $@
+	echo "$< : ../Makefile" >> $(notdir $@)$(DEP)
+	@$(RM) $(notdir $@)
+	$(DBTORECORDTYPEH) $(DBDFLAGS) $< $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/%Record.h: %Record.dbd
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
-	@$(RM) $@
-	$(DBTORECORDTYPEH) $(DBDFLAGS)  $< $@
+	echo "$< : ../Makefile" >> $(notdir $@)$(DEP)
+	@$(RM) $(notdir $@)
+	$(DBTORECORDTYPEH) $(DBDFLAGS) $< $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/menu%.h: $(COMMON_DIR)/menu%.dbd
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
-	@$(RM) $@
-	$(DBTOMENUH) $(DBDFLAGS) $< $@
+	echo "$< : ../Makefile" >> $(notdir $@)$(DEP)
+	@$(RM) $(notdir $@)
+	$(DBTOMENUH) $(DBDFLAGS) $< $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/menu%.h: menu%.dbd
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
-	@$(RM) $@
-	$(DBTOMENUH) $(DBDFLAGS) $< $@
+	echo "$< : ../Makefile" >> $(notdir $@)$(DEP)
+	@$(RM) $(notdir $@)
+	$(DBTOMENUH) $(DBDFLAGS) $< $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 .PRECIOUS: $(COMMON_DIR)/%.h
 
 ##################################################### DBD files
 
 $(COMMON_DIR)/bpt%.dbd: bpt%.data 
-	@$(RM) $@
-	$(MAKEBPT) $< $@
+	$(MAKEBPT) $< $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/%.dbd: $(COMMON_DIR)/%Include.dbd 
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
+	echo "$< : ../Makefile" >> $(notdir $@)$(DEP)
 	$(ECHO) "Expanding dbd"
-	@$(RM) $@
-	@$(DBEXPAND) $(DBDFLAGS) -o $@ $<
+	@$(RM) $(notdir $@)
+	@$(DBEXPAND) $(DBDFLAGS) -o $(notdir $@) $<
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/%.dbd: %Include.dbd 
 	@$(RM) $(notdir $@)$(DEP)
 	@$(DBDDEPENDS_CMD)
-	$(ECHO) "$<:../Makefile" >> $(notdir $@)$(DEP)
+	echo "$< : ../Makefile" >> $(notdir $@)$(DEP)
 	$(ECHO) "Expanding dbd"
-	@$(RM) $@
-	$(DBEXPAND) $(DBDFLAGS) -o $@ $<
+	@$(RM) $(notdir $@)
+	$(DBEXPAND) $(DBDFLAGS) -o $(notdir $@) $<
+	@$(MV) $(notdir $@) $@
 
 $(COMMON_DIR)/%Include.dbd:
-	@$(RM) $@
-	$(PERL) $(TOOLS)/makeIncludeDbd.pl $($*_DBD) $@
+	@$(RM) $(notdir $@)
+	$(PERL) $(TOOLS)/makeIncludeDbd.pl $($*_DBD) $(notdir $@)
+	@$(MV) $(notdir $@) $@
 
 $(INSTALL_DBD)/%: $(COMMON_DIR)/%
 	$(ECHO) "Installing created dbd file $@"
@@ -302,8 +309,8 @@ $(COMMON_DIR)/%.db$(RAW): $(COMMON_DIR)/%.edf
 
 $(COMMON_DIR)/%.db$(RAW): %.substitutions
 	@$(RM) $(notdir $@)$(DEP)
-	$(MAKEDBDEPENDS) $@ $< $(TEMPLATE_FILENAME) >> $(notdir $@)$(DEP)
-	$(ECHO) "$@:$(TEMPLATE_FILENAME)" >> $(notdir $@)$(DEP)
+	@$(MAKEDBDEPENDS) $@ $< $(TEMPLATE_FILENAME) >> $(notdir $@)$(DEP)
+	echo "$@ : $(TEMPLATE_FILENAME)" >> $(notdir $@)$(DEP)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $@ $*.tmp
 	$(MSI) $(DBFLAGS) -S$< $(TEMPLATE_FILENAME) > $*.tmp

configure/RULES_BUILD

@@ -205,11 +205,6 @@ $(OBJLIBNAME):%$(OBJ):
 	@$(RM) $@
 	$(COMPILE.cpp) $(call PATH_FILTER,$<) $(COMPILE_FILTER.cpp)
 
-%$(OBJ): %.C
-	@$(HDEPENDS_CMD)
-	@$(RM) $@
-	$(COMPILE.cpp) $(call PATH_FILTER,$<) $(COMPILE_FILTER.cpp)
-
 # WIN95/NT resource compiler
 %$(RES): %.rc
 	@$(RM) $@

configure/RULES_TOP

@@ -1,10 +1,9 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE Versions 3.13.7
-# and higher are distributed subject to a Software License Agreement found
+# EPICS BASE is distributed subject to a Software License Agreement found
 # in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
@@ -13,73 +12,73 @@
 
 include $(CONFIG)/RULES_DIRS
 
+distclean: realclean cvsclean realuninstall
+
+CVSCLEAN=$(firstword $(wildcard $(TOOLS)/cvsclean.pl $(TOP)/src/tools/cvsclean.pl))
+cvsclean:
+	$(PERL) $(CVSCLEAN)
+
+realuninstall: uninstallDirs
+	$(RMDIR) $(INSTALL_LOCATION_BIN)
+	$(RMDIR) $(INSTALL_LOCATION_LIB)
+
 UNINSTALL_DIRS += $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC)\
         $(INSTALL_HTML) $(INSTALL_JAVA) $(INSTALL_TEMPLATES) \
         $(INSTALL_DB)
 UNINSTALL_DIRS += $(DIRECTORY_TARGETS)
+uninstallDirs:
+	$(RMDIR) $(UNINSTALL_DIRS)
+
+uninstall: archuninstall uninstallDirs
+
+archuninstall: $(addprefix uninstall$(DIVIDER),$(BUILD_ARCHS))
+	@$(MAKE) -f Makefile cleandirs
 
-uninstallArchTargets = $(foreach arch,$(BUILD_ARCHS), uninstall$(DIVIDER)$(arch))
 archPart = $(word 2, $(subst $(DIVIDER), ,$@))
-
-$(uninstallArchTargets): uninstallDirs
-	@$(RMDIR) $(INSTALL_LOCATION_BIN)/$(archPart) $(INSTALL_LOCATION_LIB)/$(archPart) 
+uninstall$(DIVIDER)%:
+	$(RMDIR) $(INSTALL_LOCATION_BIN)/$(archPart)
+	$(RMDIR) $(INSTALL_LOCATION_LIB)/$(archPart)
 
 cleandirs:
 ifeq ($(wildcard $(INSTALL_LOCATION_BIN)/*),)
-	@$(RMDIR) $(INSTALL_LOCATION_BIN)
+	$(RMDIR) $(INSTALL_LOCATION_BIN)
 endif
 ifeq ($(wildcard $(INSTALL_LOCATION_LIB)/*),)
-	@$(RMDIR) $(INSTALL_LOCATION_LIB)
+	$(RMDIR) $(INSTALL_LOCATION_LIB)
 endif
 	@echo
 # The echo above stops a "nothing to be done for cleandirs" message
 
-distclean: realclean realuninstall
-
-CVSCLEAN=$(firstword $(wildcard $(TOOLS)/cvsclean.pl $(TOP)/src/tools/cvsclean.pl))
-
-cvsclean:
-	@$(PERL) $(CVSCLEAN) 
-
-realuninstall:
-	@$(RMDIR) $(INSTALL_LOCATION_BIN) $(INSTALL_LOCATION_LIB)
-	@$(RMDIR) $(UNINSTALL_DIRS)
-
-uninstall: $(addprefix uninstall$(DIVIDER),$(BUILD_ARCHS))
-	@$(MAKE) -f Makefile  cleandirs
-
-uninstallDirs:
-	@$(RMDIR) $(UNINSTALL_DIRS)
-
 help:
 	@echo "Usage: gnumake [options] [target] ..."
 	@echo "Targets supported by all Makefiles:"
-	@echo "     install        - Builds and installs all targets (default rule)"
-	@echo "     all            - Same as install"
-	@echo "     buildInstall   - Same as install"
+	@echo "     all            - Same as install (default rule)"
+	@echo "     inc            - Installs header files"
+	@echo "     build          - Builds and installs all targets"
+	@echo "     install        - Builds and installs all targets"
+	@echo "     buildInstall   - Same as install (deprecated)"
 	@echo "     clean          - Removes the O.<arch> dirs created by running make"
 	@echo "                      In O.<arch> dir, clean removes build created files"
 	@echo "     realclean      - Removes ALL O.<arch> dirs"
 	@echo "                      Cannot be used within an O.<arch> dir"
 	@echo "     rebuild        - Same as clean install"
-	@echo "     inc            - Installs header files"
-	@echo "     build          - Builds all targets"
 	@echo "     archclean      - Removes O.<arch> dirs but not O.Common dir"
 	@echo "\"Partial\" build targets supported by Makefiles:"
 	@echo "     inc.<arch>     - Installs <arch> only header files."
+	@echo "     build.<arch>   - Builds and installs <arch> only."
 	@echo "     install.<arch> - Builds and installs <arch> only."
 	@echo "     clean.<arch>   - Cleans <arch> binaries in O.<arch> dirs only."
-	@echo "     build.<arch>   - Builds <arch> only."
+	@echo "     uninstall.<arch> - Remove bin & lib directories for <arch> only."
 	@echo "Targets supported by top level Makefile:"
-	@echo "     uninstall      - Cleans directories created by the install."
+	@echo "     archuninstall  - Remove bin & lib directories created by this hostarch."
+	@echo "     uninstall      - Remove install directories created by this hostarch."
 	@echo "     realuninstall  - Removes ALL install dirs"
-	@echo "     distclean      - Same as realclean realuninstall."
+	@echo "     distclean      - Same as realclean cvsclean realuninstall."
 	@echo "     cvsclean       - Removes cvs .#* files in all dirs of directory tree"
 	@echo "     help           - Prints this list of valid make targets "
 	@echo "Indiv. object targets are supported by O.<arch> level Makefile .e.g"
 	@echo "     xxxRecord.o"
 
-.PHONY : $(uninstallArchTargets)
-.PHONY : uninstall help cleandirs distclean uninstallDirs realuninstall
-.PHONY : cvsclean
+.PHONY: cleandirs distclean cvsclean realuninstall archuninstall uninstallDirs
+.PHONY: uninstall help
 

configure/os/CONFIG.Common.RTEMS-beatnik

@@ -1,17 +1,19 @@
 #
 # CONFIG.Common.RTEMS-beatnik
-# A migration from Eric Norum's CONFIG.Common.RTEMS-mvme5500
-# Author: Dayle Kotturi
-#         SLAC
-#         dayle@slac.stanford.edu
+# $Revision-Id$
+# Author: Dayle Kotturi <dayle@slac.stanford.edu>
 #
 # All RTEMS targets use the same Makefile fragment
 #
-override EXE=.elf
+EXE = .elf
 RTEMS_TARGET_CPU = powerpc
-GNU_TARGET=powerpc-rtems
+GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_MOTLOAD
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_MBUF_SPACE=2048
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_CLUSTER_SPACE=5120
+
+OP_SYS_LDLIBS += -lbspExt
 
 MUNCH_SUFFIX = .boot
 MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
@@ -19,16 +21,13 @@ define MUNCH_CMD
 	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary $< $@
 endef
 
-CROSS_COMPILER_TARGET_ARCHS=RTEMS-beatnik
-
 include $(CONFIG)/os/CONFIG.Common.RTEMS
+
 RTEMSSYMS=$(PRODNAME:%$(EXE)=%.sym)
 RTEMSIMGS=$(PRODNAME:%$(EXE)=%.bin)
 INSTALL_RTEMSSYMS=$(RTEMSSYMS:%=$(INSTALL_BIN)/%)
 INSTALL_RTEMSIMGS=$(RTEMSIMGS:%=$(INSTALL_BIN)/%)
 
-OP_SYS_LDLIBS += -lbspExt
-
 %.sym: %$(EXE)
 	$(XSYMS) $^ $@
 

configure/os/CONFIG.Common.RTEMS-mvme2100

@@ -1,15 +1,18 @@
 #
+# CONFIG.Common.RTEMS-mvme3100
 # $Revision-Id$
-# Author: W. Eric Norum
-#         Canadian Light Source
-#         eric@cls.usask.ca
+# Author: W. Eric Norum <wenorum@lbl.gov>
 #
 # All RTEMS targets use the same Makefile fragment
 #
+EXE = .elf
 RTEMS_TARGET_CPU = powerpc
+GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_PPCBUG
 
+OP_SYS_LDLIBS += -lbspExt
+
 MUNCH_SUFFIX = .boot
 MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
 define MUNCH_CMD
@@ -24,6 +27,4 @@ define MUNCH_CMD
 	rm -f rtems.gz
 endef
 
-OP_SYS_LDLIBS += -lbspExt
-
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme3100

@@ -1,11 +1,19 @@
 #
+# CONFIG.Common.RTEMS-mvme3100
+# $Revision-Id$
+# Author: W. Eric Norum <wenorum@lbl.gov>
+#
 # All RTEMS targets use the same Makefile fragment
 #
-override EXE=.elf
+EXE = .elf
 RTEMS_TARGET_CPU = powerpc
-GNU_TARGET=powerpc-rtems
+GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_MOTLOAD
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_MBUF_SPACE=2048
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_CLUSTER_SPACE=5120
+
+OP_SYS_LDLIBS += -lbspExt
 
 MUNCH_SUFFIX = .boot
 MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
@@ -13,16 +21,13 @@ define MUNCH_CMD
 	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary $< $@
 endef
 
-CROSS_COMPILER_TARGET_ARCHS=RTEMS-beatnik
-
 include $(CONFIG)/os/CONFIG.Common.RTEMS
+
 RTEMSSYMS=$(PRODNAME:%$(EXE)=%.sym)
 RTEMSIMGS=$(PRODNAME:%$(EXE)=%.bin)
 INSTALL_RTEMSSYMS=$(RTEMSSYMS:%=$(INSTALL_BIN)/%)
 INSTALL_RTEMSIMGS=$(RTEMSIMGS:%=$(INSTALL_BIN)/%)
 
-OP_SYS_LDLIBS += -lbspExt
-
 %.sym: %$(EXE)
 	$(XSYMS) $^ $@
 

configure/os/CONFIG.Common.RTEMS-mvme5500

@@ -1,16 +1,21 @@
 #
+# CONFIG.Common.RTEMS-mvme5500
 # $Revision-Id$
-# Author: W. Eric Norum
-#         Advanced Photon Source
-#         norume@aps.anl.gov
+# Author: W. Eric Norum <wenorum@lbl.gov>
 #
 # All RTEMS targets use the same Makefile fragment
 #
+EXE = .elf
 RTEMS_TARGET_CPU = powerpc
+GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_MOTLOAD
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_MBUF_SPACE=2048
+ARCH_DEP_CFLAGS += -DRTEMS_NETWORK_CONFIG_CLUSTER_SPACE=5120
 ARCH_DEP_CFLAGS += -DBSP_NVRAM_BASE_ADDR=0xf1110000
 
+OP_SYS_LDLIBS += -lbspExt
+
 MUNCH_SUFFIX = .boot
 MUNCHNAME = $(PRODNAME:%$(EXE)=%$(MUNCH_SUFFIX))
 define MUNCH_CMD

configure/os/CONFIG.Common.iosCommon

@@ -55,7 +55,7 @@ CCC = $(GNU_BIN)/c++
 
 #-------------------------------------------------------
 # Linker flags
-OP_SYS_LDFLAGS += -dynamic -Z -L$(SDK_DIR)/usr/lib
+OP_SYS_LDFLAGS += -dynamic -Z -L$(SDK_DIR)/usr/lib -L$(SDK_DIR)/usr/lib/system
 
 #-------------------------------------------------------
 # Shared libraries

configure/os/CONFIG.Common.linux-arm

@@ -29,4 +29,11 @@ ifeq ($(BUILD_CLASS),CROSS)
     # Provide a link-time path for products
     PRODDIR_RPATH_LDFLAGS_YES += $(PROD_DEPLIB_DIRS:%=-Wl,-rpath-link,%)
     PRODDIR_LDFLAGS += $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
+
+    # Provide a link-time path for readline 
+    RUNTIME_LDFLAGS_READLINE_YES = -Wl,-rpath-link,$(GNU_DIR)/lib
+    RUNTIME_LDFLAGS_READLINE = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+    RUNTIME_LDFLAGS_READLINE_CURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+    RUNTIME_LDFLAGS_READLINE_NCURSES = $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
+
 endif

configure/os/CONFIG.Common.solaris-sparc

@@ -35,8 +35,6 @@ SHRLIBDIR_LDFLAGS += $(SHRLIBDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
 PRODDIR_RPATH_LDFLAGS_YES += $(PROD_DEPLIB_DIRS:%=-R%)
 PRODDIR_LDFLAGS += $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
 
-RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(COMMANDLINE_LIBRARY))
-
 GNU_TARGET=sparc-sun-solaris2
 
 STLPORT_CFLAGS_YES= -library=stlport4
@@ -53,17 +51,17 @@ OP_SYS_LDLIBS += $(STLPORT_LDLIBS_$(USE_STLPORT))
 
 # OS libraries used when generating shared libraries or static binaries
 OP_SYS_LDLIBS += -lsocket -lnsl
-OP_SYS_LDLIBS_8 += -lCrun -lc
-OP_SYS_LDLIBS_9 += -lumem -lCrun -lc
+OP_SYS_LDLIBS_8 += -ldl -lCrun -lc
+OP_SYS_LDLIBS_9 += -ldl -lumem -lCrun -lc
 OP_SYS_LDLIBS_10 += -lumem -lCrun -lc
 OP_SYS_LDLIBS += $(OP_SYS_LDLIBS_$(SOLARIS_VERSION))
 
 #  Definitions used when COMMANDLINE_LIBRARY is READLINE
 READLINE_DIR = $(GNU_DIR)
 INCLUDES_READLINE = -I$(READLINE_DIR)/include
-RUNTIME_LDFLAGS_READLINE += -R$(READLINE_DIR)/lib
+RUNTIME_LDFLAGS_READLINE_YES += -R$(READLINE_DIR)/lib
+RUNTIME_LDFLAGS_READLINE += $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
 LDFLAGS_READLINE += -L$(READLINE_DIR)/lib
 LDLIBS_READLINE = -lreadline -lcurses
 # Use archive if there is a problem with the readline shared library
 #LDLIBS_READLINE = -Bstatic -lreadline -Bdynamic -lcurses
-

configure/os/CONFIG.Common.solaris-sparc-gnu

@@ -15,7 +15,7 @@ COMPILER_CPPFLAGS =  -D_REENTRANT
 
 STLPORT_LDLIBS_NO =
 
-OP_SYS_LDLIBS_8 =
-OP_SYS_LDLIBS_9 =
+OP_SYS_LDLIBS_8 = -ldl
+OP_SYS_LDLIBS_9 = -ldl
 OP_SYS_LDLIBS_10 =
 

configure/os/CONFIG.Common.solaris-x86

@@ -36,8 +36,6 @@ SHRLIBDIR_LDFLAGS += $(SHRLIBDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
 PRODDIR_RPATH_LDFLAGS_YES += $(PROD_DEPLIB_DIRS:%=-R%)
 PRODDIR_LDFLAGS += $(PRODDIR_RPATH_LDFLAGS_$(LINKER_USE_RPATH))
 
-RUNTIME_LDFLAGS += $(RUNTIME_LDFLAGS_$(COMMANDLINE_LIBRARY))
-
 GNU_TARGET=x86-sun-solaris2
 
 STLPORT_CFLAGS_YES= -library=stlport4
@@ -52,8 +50,8 @@ OP_SYS_CFLAGS+=$(STLPORT_CFLAGS_$(USE_STLPORT))
 OP_SYS_LDFLAGS+=$(STLPORT_CFLAGS_$(USE_STLPORT))
 
 OP_SYS_LDLIBS += -lsocket -lnsl
-OP_SYS_LDLIBS_8 += -lCrun -lc
-OP_SYS_LDLIBS_9 += -lCrun -lc
+OP_SYS_LDLIBS_8 += -ldl -lCrun -lc
+OP_SYS_LDLIBS_9 += -ldl -lCrun -lc
 OP_SYS_LDLIBS_10 += -lCrun -lc
 OP_SYS_LDLIBS += $(OP_SYS_LDLIBS_$(SOLARIS_VERSION))
 OP_SYS_LDLIBS += $(STLPORT_LDLIBS_$(USE_STLPORT))
@@ -61,7 +59,8 @@ OP_SYS_LDLIBS += $(STLPORT_LDLIBS_$(USE_STLPORT))
 #  Definitions used when COMMANDLINE_LIBRARY is READLINE
 READLINE_DIR = $(GNU_DIR)
 INCLUDES_READLINE = -I$(READLINE_DIR)/include
-RUNTIME_LDFLAGS_READLINE += -R$(READLINE_DIR)/lib
+RUNTIME_LDFLAGS_READLINE_YES += -R$(READLINE_DIR)/lib
+RUNTIME_LDFLAGS_READLINE += $(RUNTIME_LDFLAGS_READLINE_$(LINKER_USE_RPATH))
 LDFLAGS_READLINE += -L$(READLINE_DIR)/lib
 LDLIBS_READLINE = -lreadline -lcurses
 # Use archive if there is a problem with the readline shared library

configure/os/CONFIG.Common.solaris-x86-gnu

@@ -14,7 +14,7 @@ COMPILER_CPPFLAGS = -D_REENTRANT
 
 STLPORT_LDLIBS_NO =
 
-OP_SYS_LDLIBS_8 = -lc
-OP_SYS_LDLIBS_9 = -lc
+OP_SYS_LDLIBS_8 = -ldl -lc
+OP_SYS_LDLIBS_9 = -ldl -lc
 OP_SYS_LDLIBS_10 = -lc
 

configure/os/CONFIG.Common.vxWorks-mpc8540

@@ -1,9 +1,10 @@
+# CONFIG.Common.vxWorks-mpc8540
+#
 # $Revision-Id$
+# This file is maintained by the build community.
 #
-# Definitions for vxWorks-mpc8540 targets: MPC8540 CPU with >32MB RAM.
-# Site-specific overrides go in CONFIG_SITE.Common.vxWorks-mpc8540
-#
-# This file is maintained by the EPICS build community.
+# Definitions for vxWorks-mpc8540 target archs
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorks-mpc8540
 #-------------------------------------------------------
 
 # Include definitions common to all vxWorks target archs

configure/os/CONFIG.Common.vxWorks-mpc8548

@@ -0,0 +1,26 @@
+# CONFIG.Common.vxWorks-mpc8548
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for vxWorks-mpc8548 target archs
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorks-mpc8548
+#-------------------------------------------------------
+
+# Include definitions common to all vxWorks target archs
+include $(CONFIG)/os/CONFIG.Common.vxWorksCommon
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+
+ARCH_CLASS = ppc
+
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=PPC32
+ARCH_DEP_CFLAGS = -DCPU_VARIANT=_ppc85XX_e500v2
+ARCH_DEP_CFLAGS += -mlongcall
+
+# This flag isn't present in early vxWorks 6.x versions
+#ARCH_DEP_CFLAGS += -te500v2
+
+GNU_TARGET = powerpc-wrs-vxworks

configure/os/CONFIG.Common.vxWorks-mpc8548-debug

@@ -0,0 +1,14 @@
+# CONFIG.Common.vxWorks-mpc8548-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for vxWorks-mpc8548-debug targets.
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorks-mpc8548-debug
+#-------------------------------------------------------
+
+# Include definitions common to all vxWorks archs
+include $(CONFIG)/os/CONFIG.Common.vxWorks-mpc8548
+
+CROSS_OPT = NO
+

configure/os/CONFIG.Common.vxWorks-ppc32

@@ -0,0 +1,24 @@
+# $Revision-Id$
+#
+# Definitions for vxWorks-ppc603 targets with >32MB of RAM
+# Site-specific overrides go in CONFIG_SITE.Common.vxWorks-ppc603_long
+#
+# This file is maintained by the EPICS build community.
+#-------------------------------------------------------
+
+# Include definitions common to all vxWorks target archs
+include $(CONFIG)/os/CONFIG.Common.vxWorksCommon
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+ARCH_CLASS = ppc
+
+# Architecture specific build flags
+ARCH_DEP_CPPFLAGS = -DCPU=PPC32
+ARCH_DEP_CFLAGS = -mstrict-align
+
+GNU_TARGET = powerpc-wrs-vxworks
+
+# Tell compiler to generate long branches
+ARCH_DEP_CFLAGS += -mlongcall

configure/os/CONFIG.Common.vxWorks-ppc32-debug

@@ -0,0 +1,14 @@
+# CONFIG.Common.vxWorks-ppc32-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for vxWorks-ppc32-debug target archs
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorks-ppc32-debug
+#-------------------------------------------------------
+
+# Include definitions common to all vxWorks archs
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc32
+
+CROSS_OPT = NO
+

configure/os/CONFIG.Common.vxWorks-ppc32sf

@@ -0,0 +1,13 @@
+# $Revision-Id$
+#
+# Definitions for vxWorks-ppc32sf targets
+# Site-specific overrides go in CONFIG_SITE.Common.vxWorks-ppc32sf
+#
+# This file is maintained by the EPICS build community.
+#-------------------------------------------------------
+
+# Inherit the settings from vxWorks-ppc32
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc32
+
+# Tell compiler to use software floating-point
+ARCH_DEP_CFLAGS += -msoft-float

configure/os/CONFIG.Common.vxWorks-ppc32sf-debug

@@ -0,0 +1,14 @@
+# CONFIG.Common.vxWorks-ppc32sf-debug
+#
+# $Revision-Id$
+# This file is maintained by the build community.
+#
+# Definitions for vxWorks-ppc32sf-debug target archs
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorks-ppc32sf-debug
+#-------------------------------------------------------
+
+# Include definitions common to all vxWorks archs
+include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc32sf
+
+CROSS_OPT = NO
+

configure/os/CONFIG.Common.vxWorksCommon

@@ -159,7 +159,7 @@ export TOOL_FAMILY = GNU
 
 #--------------------------------------------------
 # Operating system flags
-OP_SYS_CPPFLAGS += -DvxWorks
+OP_SYS_CPPFLAGS += -DvxWorks=vxWorks
 OP_SYS_CFLAGS += -fno-builtin
 
 # Fix for vxWorks 5 headers that use macros defined in vxWorks.h but

configure/os/CONFIG.cygwin-x86.cygwin-x86-debug

@@ -7,8 +7,10 @@
 # Sites may override these definitions in CONFIG_SITE.cygwin-x86.cygwin-x86-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.Common.cygwin-x86
-include $(CONFIG)/os/CONFIG.cygwin-x86.cygwin-x86
+-include $(CONFIG)/os/CONFIG.Common.cygwin-x86
+-include $(CONFIG)/os/CONFIG.cygwin-x86.cygwin-x86
+-include $(CONFIG)/os/CONFIG_SITE.Common.cygwin-x86
+-include $(CONFIG)/os/CONFIG_SITE.cygwin-x86.cygwin-x86
 
 BUILD_CLASS = HOST
 

configure/os/CONFIG.darwin-ppc.darwin-ppc-debug

@@ -9,6 +9,8 @@
 
 -include $(CONFIG)/os/CONFIG.Common.darwin-ppc
 -include $(CONFIG)/os/CONFIG.darwin-ppc.darwin-ppc
+-include $(CONFIG)/os/CONFIG_SITE.Common.darwin-ppc
+-include $(CONFIG)/os/CONFIG_SITE.darwin-ppc.darwin-ppc
 
 BUILD_CLASS=HOST
 HOST_OPT = NO

configure/os/CONFIG.darwin-x86.darwin-x86-debug

@@ -9,6 +9,9 @@
 
 -include $(CONFIG)/os/CONFIG.Common.darwin-x86
 -include $(CONFIG)/os/CONFIG.darwin-x86.darwin-x86
+-include $(CONFIG)/os/CONFIG_SITE.Common.darwin-x86
+-include $(CONFIG)/os/CONFIG_SITE.darwin-x86.darwin-x86
+
 
 BUILD_CLASS=HOST
 HOST_OPT = NO

configure/os/CONFIG.linux-x86.linux-x86-debug

@@ -7,8 +7,9 @@
 # Sites may override these definitions in CONFIG_SITE.linux-x86.linux-x86-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
+-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
+#-include $(CONFIG)/os/CONFIG_SITE.Common.linux-x86
+#-include $(CONFIG)/os/CONFIG_SITE.linux-x86.linux-x86
 
 BUILD_CLASS=HOST
 HOST_OPT=NO
-

configure/os/CONFIG.linux-x86_64.linux-x86_64-debug

@@ -7,8 +7,9 @@
 # Sites may override these definitions in CONFIG_SITE.linux-x86_64.linux-x86_64-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
+-include $(CONFIG)/os/CONFIG.linux-x86_64.linux-x86_64
+-include $(CONFIG)/os/CONFIG_SITE.Common.linux-x86_64
+-include $(CONFIG)/os/CONFIG_SITE.linux-x86_64.linux-x86_64
 
 BUILD_CLASS=HOST
-
 HOST_OPT = NO

configure/os/CONFIG.solaris-sparc.solaris-sparc-debug

@@ -7,7 +7,9 @@
 # Sites may override these definitions in CONFIG_SITE.solaris-sparc.solaris-sparc-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.solaris-sparc.solaris-sparc
+-include $(CONFIG)/os/CONFIG.solaris-sparc.solaris-sparc
+-include $(CONFIG)/os/CONFIG_SITE.Common.solaris-sparc
+-include $(CONFIG)/os/CONFIG_SITE.solaris-sparc.solaris-sparc
 
 BUILD_CLASS=HOST
 HOST_OPT=NO

configure/os/CONFIG.solaris-x86.solaris-x86-debug

@@ -7,8 +7,10 @@
 # Sites may override these definitions in CONFIG_SITE.solaris-x86.solaris-x86-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.Common.solaris-x86
-include $(CONFIG)/os/CONFIG.solaris-x86.solaris-x86
+-include $(CONFIG)/os/CONFIG.Common.solaris-x86
+-include $(CONFIG)/os/CONFIG.solaris-x86.solaris-x86
+-include $(CONFIG)/os/CONFIG_SITE.Common.solaris-x86
+-include $(CONFIG)/os/CONFIG_SITE.solaris-x86.solaris-x86
 
 BUILD_CLASS=HOST
 

configure/os/CONFIG.win32-x86-borland.Common

@@ -8,10 +8,11 @@
 #-------------------------------------------------------
 
 CP = $(PERL) -MExtUtils::Command -e cp
-MV = $(PERL) -MExtUtils::Command -e mv 
+MV = $(PERL) -MExtUtils::Command -e mv
 RM = $(PERL) -MExtUtils::Command -e rm_f
 MKDIR = $(PERL) -MExtUtils::Command -e mkpath
 RMDIR = $(PERL) -MExtUtils::Command -e rm_rf
+COMMENT = $(PERL) -e ''
 
 WIND_HOST_TYPE = x86-win32
 OSITHREAD_USE_DEFAULT_STACK = NO

configure/os/CONFIG.win32-x86-mingw.Common

@@ -11,10 +11,11 @@
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
 CP = $(PERL) -MExtUtils::Command -e cp
-MV = $(PERL) -MExtUtils::Command -e mv 
+MV = $(PERL) -MExtUtils::Command -e mv
 RM = $(PERL) -MExtUtils::Command -e rm_f
 MKDIR = $(PERL) -MExtUtils::Command -e mkpath
 RMDIR = $(PERL) -MExtUtils::Command -e rm_rf
+COMMENT = $(PERL) -e ''
 
 WIND_HOST_TYPE = x86-win32
 OSITHREAD_USE_DEFAULT_STACK = NO

configure/os/CONFIG.win32-x86-mingw.win32-x86-mingw

@@ -26,7 +26,4 @@ LOADABLE_SHRLIB_LDFLAGS = -shared -Wl,--out-implib,$(LIB_PREFIX)$*$(LIB_SUFFIX)
 # Override linking with gcc library from CONFIG.gnuCommon
 GNU_LDLIBS_YES =
 
-OPT_CFLAGS_NO = -O3 -g
-OPT_CXXFLAGS_NO = -O3 -g
-
 OP_SYS_LDLIBS = -lws2_32 

configure/os/CONFIG.win32-x86-mingw.win32-x86-mingw-debug

@@ -7,8 +7,10 @@
 # Sites may override these definitions in CONFIG_SITE.win32-x86-mingw.win32-x86-mingw-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.Common.win32-x86-mingw
-include $(CONFIG)/os/CONFIG.win32-x86-mingw.win32-x86-mingw
+-include $(CONFIG)/os/CONFIG.Common.win32-x86-mingw
+-include $(CONFIG)/os/CONFIG.win32-x86-mingw.win32-x86-mingw
+-include $(CONFIG)/os/CONFIG_SITE.Common.win32-x86-mingw
+-include $(CONFIG)/os/CONFIG_SITE.win32-x86-mingw.win32-x86-mingw
 
 BUILD_CLASS = HOST
 

configure/os/CONFIG.win32-x86.Common

@@ -8,10 +8,11 @@
 #-------------------------------------------------------
 
 CP = $(PERL) -MExtUtils::Command -e cp
-MV = $(PERL) -MExtUtils::Command -e mv 
+MV = $(PERL) -MExtUtils::Command -e mv
 RM = $(PERL) -MExtUtils::Command -e rm_f
 MKDIR = $(PERL) -MExtUtils::Command -e mkpath
 RMDIR = $(PERL) -MExtUtils::Command -e rm_rf
+COMMENT = $(PERL) -e ''
 
 WIND_HOST_TYPE = x86-win32
 OSITHREAD_USE_DEFAULT_STACK = NO

configure/os/CONFIG.win32-x86.win32-x86

@@ -31,7 +31,9 @@ BAFCMD = bscmake /nologo /o $@
 # Configure OS vendor C compiler
 CC = cl
 
+# Override CONFIG.gnuCommon for cross builds.
 GNU = NO
+HDEPENDS_METHOD = CMD
 
 #
 # /W<N> use warning level N

configure/os/CONFIG.win32-x86.win32-x86-debug

@@ -7,10 +7,14 @@
 # Sites may override these definitions in CONFIG_SITE.win32-x86.win32-x86-debug
 #-------------------------------------------------------
 
-include $(CONFIG)/os/CONFIG.win32-x86-debug.win32-x86-debug
+-include $(CONFIG)/os/CONFIG.Common.win32-x86
+-include $(CONFIG)/os/CONFIG.win32-x86.win32-x86
+-include $(CONFIG)/os/CONFIG_SITE.Common.win32-x86
+-include $(CONFIG)/os/CONFIG_SITE.win32-x86.win32-x86
 
 GNU = NO
 
+HDEPENDS_METHOD = CMD
 BUILD_CLASS = HOST
 
 HOST_OPT = NO

configure/os/CONFIG_SITE.Common.darwin-x86

@@ -13,3 +13,11 @@
 ARCH_CLASS = i386
 #ARCH_CLASS = x86_64
 #ARCH_CLASS = i386 x86_64
+
+#
+# Uncomment the followings lines to build with CLANG instead of GCC.
+#
+#CC             = clang
+#CCC            = clang++
+#GNU_LDLIBS_YES =
+

configure/os/CONFIG_SITE.Common.iosCommon

@@ -9,7 +9,8 @@
 # iOS Version number
 
 #IOS_VERSION = 3.2
-IOS_VERSION = 4.1
+#IOS_VERSION = 4.1
+IOS_VERSION = 4.3
 
 
 # Most sites will want shared libraries

configure/os/CONFIG_SITE.Common.linux-cris

@@ -1,5 +1,7 @@
 # CONFIG_SITE.Common.linux-cris
 #
+# $Revision-Id$
+#
 # Site Specific definitions for linux-cris target
 # Only the local epics system manager should modify this file
 
@@ -15,9 +17,21 @@
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
-# If readline is not installed comment the following line
-# to omit command-line editing and history support
+# Depending on your version of Linux you may want one of the following
+# lines to enable command-line editing and history in iocsh.  If you're
+# not sure which, start with the top one and work downwards until the
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
 
+# No other libraries needed (recent Fedora, Ubuntu etc.):
 #COMMANDLINE_LIBRARY = READLINE
+
+# Needs -lncurses (RHEL 5 etc.):
+#COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# Needs -lcurses (older versions)
+#COMMANDLINE_LIBRARY = READLINE_CURSES
+
+
 OP_SYS_CFLAGS += -g
 

configure/os/CONFIG_SITE.Common.linux-x86

@@ -18,12 +18,19 @@
 #    to inform the system of the shared library location.
 
 # Depending on your version of Linux you'll want one of the following
-# lines to enable command-line editing and history support.  If you're
+# lines to enable command-line editing and history in iocsh.  If you're
 # not sure which, start with the top one and work downwards until the
-# build doesn't fail to link the readline library.  If none of them
-# work, comment them all out.
-#COMMANDLINE_LIBRARY = READLINE
-COMMANDLINE_LIBRARY = READLINE_NCURSES
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
+
+# No other libraries needed (recent Fedora, Ubuntu etc.):
+COMMANDLINE_LIBRARY = READLINE
+
+# Needs -lncurses (RHEL 5 etc.):
+#COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# Needs -lcurses (older versions)
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
+
 OP_SYS_CFLAGS += -g

configure/os/CONFIG_SITE.Common.linux-x86_64

@@ -18,12 +18,19 @@
 #    to inform the system of the shared library location.
 
 # Depending on your version of Linux you'll want one of the following
-# lines to enable command-line editing and history support.  If you're
+# lines to enable command-line editing and history in iocsh.  If you're
 # not sure which, start with the top one and work downwards until the
-# build doesn't fail to link the readline library.  If none of them
-# work, comment them all out.
+# build doesn't fail to link the readline library.  If none of them work,
+# comment them all out to build without readline support.
+
+# No other libraries needed (recent Fedora, Ubuntu etc.):
 COMMANDLINE_LIBRARY = READLINE
+
+# Needs -lncurses (RHEL 5 etc.):
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# Needs -lcurses (older versions)
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
+
 OP_SYS_CFLAGS += -g

configure/os/CONFIG_SITE.Common.vxWorks-mpc8548

@@ -0,0 +1,6 @@
+# $Revision-Id$
+#
+# Site Specific definitions for the vxWorks-mpc8548 target
+#
+# Only the local epics system manager should modify this file
+#-------------------------------------------------------

configure/os/CONFIG_SITE.win32-x86-borland.Common

@@ -7,6 +7,5 @@
  
 # jba overrides
 #CROSS_COMPILER_TARGET_ARCHS=vxWorks-486
-#VX_DIR = T:/tornado20
 
 BORLAND = c:\\Borland\\Bcc55

configure/os/CONFIG_SITE.win32-x86.Common

@@ -8,5 +8,4 @@
 # jba test overrides
 #CROSS_COMPILER_TARGET_ARCHS=vxWorks-486
 #CROSS_COMPILER_TARGET_ARCHS+=vxWorks-68040
-#VX_DIR = T:/tornado20
 #INSTALL_LOCATION = G:/testInstall

documentation/ConvertingR3.13AppsToR3.14.html

@@ -172,7 +172,7 @@ exampleIoc_SRCS += devXxxSoft.c
 exampleIoc_LIBS += $(EPICS_BASE_IOC_LIBS)
 
 PROD_IOC_vxWorks = example
-example_SRCS += sncExample.stt
+example_SRCS += sncExample.st
 example_LIBS += exampleIoc
 example_LIBS += seq pv
 example_LIBS += $(EPICS_BASE_IOC_LIBS)
@@ -263,7 +263,7 @@ dev<i>name</i> = { ... };</q></p>
 <h3>Registration code changed</h3>
 
 <p>Registration code for application specific functions, e.g. subroutine record
-init and process functions, must been changed as follows</p>
+init and process functions, must be changed as follows</p>
 
 <ol>
   <li>Include the following header files after all existing #includes:
@@ -468,4 +468,9 @@ should add the definition</p>
 
 <p>to your application config/RELEASE file.</p>
 </body>
+
+<h3>Optional <i>top</i>/configure/CONFIG_SITE changes.</h3>
+
+<p>Review and optionally modify site build settings.</p>
+
 </html>

documentation/KnownProblems.html

@@ -4,11 +4,21 @@
 <html xmlns="http://www.w3.org/1999/xhtml">
 <head>
   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
-  <title>Known Problems in R3.14.12</title>
+  <title>Known Problems in R3.14.12.1</title>
 </head>
 
 <body>
-<h1 style="text-align: center">EPICS Base R3.14.12: Known Problems</h1>
+<h1 style="text-align: center">EPICS Base R3.14.12.1: Known Problems</h1>
+
+<p>Any patch files linked below should be applied at the root of the
+base-3.14.12.1 tree. Download them, then use the GNU Patch program as
+follows:</p>
+
+<blockquote><pre>% <b>cd <i>/path/to/</i>base-3.14.12.1</b>
+% <b>patch -p0 &lt; <i>/path/to/</i>file.patch</b></pre></blockquote>
+
+<p>The following significant problems have been reported with this
+version of EPICS Base:</p>
 
 <ul>
 

documentation/RELEASE_NOTES.html

@@ -3,21 +3,393 @@
 <html>
 <head>
   <meta http-equiv="content-type" content="text/html; charset=iso-8859-1">
-  <title>EPICS Base R3.14.12 Release Notes</title>
+  <title>EPICS Base R3.14.12.2-rc1 Release Notes</title>
 </head>
 
 <body lang="en">
-<h1 align="center">EPICS Base Release 3.14.12</h1>
+<h1 align="center">EPICS Base Release 3.14.12.2-rc1</h1>
+
+<h2 align="center">Changes between 3.14.12.1 and 3.14.12.2-rc1</h2>
+
+<!-- Insert new items immediately below here ... -->
+
+<h4>Added <tt>-b</tt> option to dbExpand</h4>
+
+<p>This turns off monotonic checking of breakpoint tables.</p>
+
+<h4>Launchpad Bugs Resolved</h4>
+
+<p>The following are links to bugs in the Launchpad bug tracker that have been
+fixed in this release:</p>
+
+<ul>
+<li>697509
+  <a href="https://launchpad.net/bugs/697509">
+    Thread synchronization issue in libCom/osi/os/WIN32/osdTime.cpp</a></li>
+<li>697516
+  <a href="https://launchpad.net/bugs/697516">
+    Crash occurs in Com.dll if filetime is before the EPICS epoch </a></li>
+<li>697517
+  <a href="https://launchpad.net/bugs/697517">
+    WIN32 osdtime should handle the system time change properly</a></li>
+<li>697519
+  <a href="https://launchpad.net/bugs/697519">
+    The incorrect way to compute the roll-over in WIN32 osdTime.cpp</a></li>
+<li>736273
+  <a href="https://launchpad.net/bugs/736273">
+    nonstandard c++ mutable ref in cac</a></li>
+<li>786979
+  <a href="https://launchpad.net/bugs/786979">
+    incorrect ref counting for timer queues</a></li>
+<li>794749
+  <a href="https://launchpad.net/bugs/794749">
+    3.14.12 caget without -c always requests maximum element count</a></li>
+<li>816678
+  <a href="https://launchpad.net/bugs/816678">
+    g++ generic thunk generation fails virtual varargs</a></li>
+<li>831648
+  <a href="https://launchpad.net/bugs/831648">
+    RTEMS dynamically loaded app fails to execute osdTimeRegister</a></li>
+<li>835138
+  <a href="https://launchpad.net/bugs/835138">
+    Incorrect calculation oss priorities for posix threads</a></li>
+<li>861214
+  <a href="https://launchpad.net/bugs/861214">
+    epicsThreadOnce crashes in static object destructor on win32</a></li>
+<li>861627
+  <a href="https://launchpad.net/bugs/861627">
+    RULES.db has incorrect dbExpand flags</a></li>
+<li>878372
+  <a href="https://launchpad.net/bugs/878372">
+    in-memory channel, ca client subscribe isnt thread safe</a></li>
+<li>878387
+  <a href="https://launchpad.net/bugs/878387">
+    In memory channel clear fails from put callback function</a></li>
+</ul>
+
+<h4>Added database sanity checks to iocInit</h4>
+
+<p>Two menus may legitimately be modified by users; some checks have been added
+that run at iocInit and make sure the choices haven't been changed too much for
+the IOC to function properly:</p>
+
+<ul>
+<li><tt>menuConvert</tt> is checked to flag problems with IOCs converted from
+  3.13.x, where the SLOPE choice didn't exist.</p>
+<li><tt>menuScan</tt> is checked to ensure the three initial choices are still
+  present and that there is at least one periodic scan rate.</li>
+</ul>
+
+<h4>Fix various catools issues</h4>
+
+<p>Array handling in the caget and camonitor programs has been debugged, fixing
+<a href="https://bugs.launchpad.net/bugs/794749">launchpad bug 794749</a> along
+with a few other related issues dating back to the addition of variable length
+array support.</p>
+
+<h4>Another race condition in errlog cleaned up</h4>
+
+<p>If it was still busy when the IOC was closed down, the errlog thread could
+have preempted the exit handler and freed the various internal pvtData mutex and
+event objects too soon.</p>
+
+<h4>Top-level make target changes</h4>
+
+<p>Several make targets have been changed. Note that these can only be used from
+an application's &lt;top&gt; directory.</p>
+
+<dl>
+  <dt><code>make uninstall.&lt;arch&gt;</code></dt>
+  <dd>Deletes the bin/&lt;arch&gt; and lib/&lt;arch&gt; directories for
+    &lt;arch&gt; only. Note that &lt;arch&gt; does not have to be an
+    architecture that this host is configured to build, it works for any
+    arch.</dd>
+
+  <dt><code>make archuninstall</code></dt>
+  <dd>Deletes the bin/&lt;arch&gt; and lib/&lt;arch&gt; directories for all
+    architectures that this host is configured to build. Should not affect files
+    used for multiple architectures, or for host or target architectures that
+    this host is not configured to build.</dd>
+
+  <dt><code>make uninstall</code></dt>
+  <dd>Does archuninstall and also deletes the other install directories include,
+    db, dbd, doc, html, templates and java. This will affect subsequent builds
+    for other architectures, but it doesn't delete their bin/&lt;arch&gt; or
+    lib/&lt;arch&gt; contents.</dd>
+
+  <dt><code>make realuninstall</code></dt>
+  <dd>Deletes all install directories for all architectures.</dd>
+
+  <dt><code>make distclean</code></dt>
+  <dd>Does realclean realuninstall as before, and also now does a cvsclean,
+    which removes file remnants from CVS operations named <code>.#*</code> and
+    editor backups named <code>*~</code> throughout the source tree.</dd>
+
+</dl>
+
+<h4>Compress record type</h4>
+
+<p>This record now posts monitors on its NUSE field whenever its value changes.
+A new field OUSE was added to support this.</p>
+
+<h4>Remove C++ build rule for <code>.C</code> files</h4>
+
+<p>An early convention on Unix systems was to name C++ files with an upper-case
+extention, <code>.C</code>. This does not work on Windows or MacOS where the
+filesystems are case-insensitive, and the C++ build rule was causing problems so
+has been eliminated. Any remaining C++ source files that are still using this
+convention will have to be renamed, preferably to <code>.cpp</code></p>
+
+<h4>Support <code>make -s</code> on Windows</h4>
+
+<p>The flag to silence build output did not work on some Windows architecture
+combinations. This has now been fixed.</p>
+
+<h4>iocLogServer now supports logrotate</h4>
+
+<p>The feature in the iocLogServer that closed and reopened the logfile used to
+ignore the SIGHUP signal when the log filename did not change. This has now been
+changed so these logfiles can be used with the standard Linux logrotate
+package.</p>
+
+
+<h2 align="center">Changes between 3.14.12 and 3.14.12.1</h2>
+
+<p>This release only contains changes that fix bugs or add build configuration
+files for new or updated target architectures.  No functionality has been
+changed, and as this is a patch release the software has not gone through as
+rigorous a testing regime as it does for a normal minor release.</p>
+
+<h4>Launchpad Bugs Resolved</h4>
+
+<p>The following are links to bugs in the Launchpad bug tracker that have been
+fixed in this release:</p>
+
+<ul>
+<li>693534
+  <a href="https://launchpad.net/bugs/693534">
+    errlog causes crash on IOC exit</a></li>
+<li>701673
+  <a href="https://launchpad.net/bugs/701673">
+    Large array problem in 3.14.12</a></li>
+<li>717252
+  <a href="https://launchpad.net/bugs/771252">
+    local caput causes ioc crash on win32</a></li>
+<li>750549 
+  <a href="https://launchpad.net/bugs/750549 ">
+    epicsTime has non-portable c++ static initialization</a></li>
+<li>753137
+  <a href="https://launchpad.net/bugs/753137">
+    Makefile dependency checking of database files is broken</a></li>
+</ul>
+
+<h4>New/Updated target architectures</h4>
+
+<p>The following target architectures have been added or updated:</p>
+
+<dl>
+<dt>vxWorks-mpc8548</dt>
+<dt>vxWorks-mpc8548-debug</dt>
+<dd style="margin-bottom: 1ex">This PowerPC CPU is used on the Emerson MVME4100
+  VME CPU board (from Ernest Williams, SLAC).</dd>
+
+<dt>vxWorks-ppc32</dt>
+<dt>vxWorks-ppc32sf</dt>
+<dt>vxWorks-ppc32-debug</dt>
+<dt>vxWorks-ppc32sf-debug</dt>
+<dd style="margin-bottom: 1ex">New generic 32-bit PowerPC targets for vxWorks
+  6.x, using hardware or software floating-point. These targets can be used
+  instead of the CPU-specific ppc603, ppc604, mpc8540 and mpc8548 targets (and
+  their _long alternatives, these targets are all compiled with the -mlongcall
+  flag) to reduce the number of distinct build targets needed when supporting
+  multiple PowerPC board types.</dd>
+
+<dt>ios-386</dt>
+<dt>ios-arm</dt>
+<dd style="margin-bottom: 1ex">Updated for iOS 4.3, which is now the default OS
+  version (from Tom Palaia, ORNL).</dd>
+
+</dl>
+
+<h4>IOCSH_STARTUP_SCRIPT environment variable</h4>
+
+<p>The function <tt>iocsh(const char *pathname)</tt> now sets the environment
+variable <tt>IOCSH_STARTUP_SCRIPT</tt> to the value of its pathname
+argument before it starts executing the script commands.</p>
+
+<h4>RTEMS-mvme5500</h4>
+
+<p>This target now automatically links binary files with the bspExt library, and
+adds the extension <tt>.elf</tt> to their filenames, matching the other mvme
+targets.</p>
+
+<h4>RTEMS Network Buffer Configuration</h4>
+
+<p>Add the macros <tt>RTEMS_NETWORK_CONFIG_MBUF_SPACE</tt> and
+<tt>RTEMS_NETWORK_CONFIG_MBUF_SPACE</tt> to rtems_netconfig.c to allow
+customization of the network buffer space allocated.  The configuration files
+for the RTEMS-mvme3100, RTEMS-mvme5500 and RTEMS-beatnik targets now default to
+allocating 2MB for mbufs and 5MB for clusters; other RTEMS targets will continue
+to use 180KB and 350KB rspectively.</p>
+
+<h4>RTEMS TFTP filesystem</h4>
+
+<p>Use the new mount API to initialize TFTP on newer RTEMS versions.</p>
+
+<h4>C++ build issues on older Solaris compiler</h4>
+
+<p>Dirk Zimoch reported some problems building with an older SUNWspro C++
+compiler which have been resolved where possible.</p>
+
+<h4>FreeBSD broadcast problem</h4>
+
+<p>The <tt>ifreq_size</tt> macro in freebsd/osdsock.h must be different in BSD
+4.4.</p>
+
+<h4>Thread exit synchronization</h4>
+
+<p>When finished waiting for a thread to exit, signal the event in case other
+  threads are waiting also.</p>
+
+<h4>Win32 osdTime provider fix</h4>
+
+<p>Jeff Hill fixed the last time compare in PLL drift factor update loop.</p>
+
+<h4>Errlog can lose messages</h4>
+
+<p>Systems that generate large numbers of errlog messages or have a slow message
+  listener could overwrite older messages in the message buffer after the buffer
+  wraps. This also corrects and annotates the test code to describe what's being
+  checked.</p>
+
+<p>When the IOC is shutting down, the errlog thread should process all queued
+  messages before it quits.</p>
+
+<h4>Back-slash escapes for Win32</h4>
+
+<p>Stephen Norum pointed out the need for various Perl scripts to escape
+back-slash characters in Windows file paths.</p>
+
+<h4>catools on Windows</h4>
+
+<p>Windows 7 does not properly support line-mode buffering of stdio streams; the
+catools programs used this mode to ensure that they could be used in pipelines,
+but in Windows 7 they became fully buffered and are not flushed when the program
+exits, so buffering of stdout has now been completely disabled on Windows.</p>
 
 
 <h2 align="center">Changes between 3.14.11 and 3.14.12</h2>
-<!-- Insert new items immediately below here ... -->
+
+<h4>Launchpad Bugs Resolved</h4>
+
+<p>The following are links to bugs in the Launchpad bug tracker that have been
+fixed in this release:</p>
+
+<ul>
+<li>541258
+  <a href="https://bugs.launchpad.net/epics-base/+bug/541258">
+    compiler warnings in base</a></li>
+<li>541264
+  <a href="https://bugs.launchpad.net/epics-base/+bug/541264">
+    CA subscription element count is fixed - eliminates compressed video
+    option</a></li>
+<li>541331
+  <a href="https://bugs.launchpad.net/epics-base/+bug/541331">
+    Several devLib routines don't use vector table</a></li>
+<li>541391
+  <a href="https://bugs.launchpad.net/epics-base/+bug/541391">
+    when subscribing for zero elements, array element count should be
+    dynamic</a></li>
+<li>545385
+  <a href="https://bugs.launchpad.net/epics-base/+bug/545385">
+    SIGFPE calculating epicsNAN, epicsINF</a></li>
+<li>546991
+  <a href="https://bugs.launchpad.net/epics-base/+bug/546991">
+    prev. value fields not initialized in init_record</a></li>
+<li>551909
+  <a href="https://bugs.launchpad.net/epics-base/+bug/551909">
+    macExpandString writes out of boundary</a></li>
+<li>552803
+  <a href="https://bugs.launchpad.net/epics-base/+bug/552803">
+    Compress record segfaults on ALG (algorithm) change</a></li>
+<li>571121
+  <a href="https://bugs.launchpad.net/epics-base/+bug/571121">
+    Perl issue compiling with INSTALL_LOCATION set</a></li>
+<li>572589
+  <a href="https://bugs.launchpad.net/epics-base/+bug/572589">
+    Make dbl emit empty strings for non-existent fields</a></li>
+<li>595154
+  <a href="https://bugs.launchpad.net/epics-base/+bug/595154">
+    C++ errors building base using cygwin1.7</a></li>
+<li>595240
+  <a href="https://bugs.launchpad.net/epics-base/+bug/595240">
+    C code uses C++ keywords as variable names</a></li>
+<li>595242
+  <a href="https://bugs.launchpad.net/epics-base/+bug/595242">
+    C code uses C++ "//" style comments</a></li>
+<li>615916
+  <a href="https://bugs.launchpad.net/epics-base/+bug/615916">
+    Bug in RULES.Db breaks parallel make when using MSI</a></li>
+<li>625034
+  <a href="https://bugs.launchpad.net/epics-base/+bug/625034">
+    Remove compiler checks for VMS in src/toolsComm/flex</a></li>
+<li>626848
+  <a href="https://bugs.launchpad.net/epics-base/+bug/626848">
+    Build with GNU make 3.82 fails when installing libraries</a></li>
+<li>626859
+  <a href="https://bugs.launchpad.net/epics-base/+bug/626859">
+    RTEMS build does not create .d dependancy files</a></li>
+<li>627511
+  <a href="https://bugs.launchpad.net/epics-base/+bug/627511">
+    MSVC linker fails if input lib dirs start with forward slash</a></li>
+<li>644263
+  <a href="https://bugs.launchpad.net/epics-base/+bug/644263">
+    EPICS softIOC always dies in response to SIGHUP</a></li>
+<li>650000
+  <a href="https://bugs.launchpad.net/epics-base/+bug/650000">
+    caput tool won't write to mbbo w/o state strings</a></li>
+<li>663875
+  <a href="https://bugs.launchpad.net/epics-base/+bug/663875">
+    NTP broadcasts break NTP synchronization (RTEMS)</a></li>
+<li>667384
+  <a href="https://bugs.launchpad.net/epics-base/+bug/667384">
+    are the request and response bytes pending reversed in casr?</a></li>
+<li>680702
+  <a href="https://bugs.launchpad.net/epics-base/+bug/680702">
+    calc and calcout record get_precision bug</a></li>
+</ul>
+
+<h4>Support for Cygwin 1.7</h4>
+
+<p>Base can now built with shared libraries on Cygwin 1.7.x, although only with
+the gcc-3 compiler.  Cygwin 1.5.x only works when compiled without shared
+libraries (set <tt>STATIC_BUILD=YES</tt> and <tt>SHARED_LIBRARIES=NO</tt> in
+<tt>configure/CONFIG_SITE</tt>).  There is code in Base now that depends on the
+Cygwin version, so make sure that you rebuild Base if you upgrade your Cygwin
+installation.</p>
+
+<h4>epicsEvent</h4>
+
+<p>epicsEvent is now explicitly required to act as a simple binary semaphore.
+A single epicsEventSignal call must awaken just one thread when multiple
+threads are waiting for the event.  A test that checks for this has been
+added to epicsEventTest and the Application Developer's Guide has been updated
+to describe this requirement.</p>
+
+<h4>Enable array puts to subArray records</h4>
+
+<p>It is now possible to put an array into the VAL field of a soft channel
+subArray record whose INP field is empty. Processing the record then causes the
+sub-array extraction process to be done on the current VAL array. This can be
+used to feed a sequence of values into some other record (set INDX=1 and
+NELM=MALM and read one element out of the VAL field each time).</p>
 
 <h4>Added windows-x64 target</h4>
 
 <p>64-bit binaries for Microsoft Windows platforms can now be built using the
 target architecture windows-x64, which is also a valid cross-build target for a
-win32-x86 host.  We do not currently support 64-bit MinGW or Cygwin builds.</p>
+win32-x86 host.  We do not currently support or recommend trying to use 64-bit
+builds on MinGW or Cygwin.</p>
 
 <h4>Deleted osf-alpha targets</h4>
 
@@ -84,8 +456,8 @@ connections over ssh.  See the CA reference manual for more details.</p>
 <h4>Record Types aai and aao</h4>
 
 <ul>
-<li>Fixed bug in memory allocation that caused crashes when linking other records
-to aai or aao.</li>
+<li>Fixed bug in memory allocation that caused crashes when linking other
+records to aai or aao.</li>
 <li>Fixed bug where NELM was modified instead of NORD.</li>
 <li>Added Soft Channel device support.</li>
 <li>Added SIOL link and proper simulation mode for Soft Channel support.</li>
@@ -113,19 +485,20 @@ macro <tt>NO_DEVLIB_COMPAT</tt> is defined.</li>
 <li>The "virtual os" table was renamed from <tt>pdevLibVirtualOS</tt> to
 <tt>pdevLibVME</tt> reflecting the fact that other bus types will need seperate
 tables.</li>
-<li>The "virtual os" table API has been moved to a seperate header file,
+<li>The "virtual os" table API has been moved to a different header file,
 <tt>devLibVMEImpl.h</tt>.</li>
 </ul>
 
 <h4>DTYP and INP/OUT order</h4>
 
-<p>The fields DTYP and INP/OUT can now be specified in any order.</p>
+<p>The fields DTYP and INP/OUT can now be specified in any order in a database
+instance (.db) file.</p>
 
 <h4>Rewrite epicsThreadOnce()</h4>
 
 <p>Michael Davidsaver suggested a better implementation of epicsThreadOnce()
 which makes it possible for all architectures to detect recursive initialization
-functions.  This change also renames the routines to remove the original macro
+functions.  This change also renames the routines to remove the original macro,
 and fixes some questionable usage in places.</p>
 
 <h4>Many Record Types</h4>
@@ -136,7 +509,7 @@ giving correct initial monitor behavior in some circumstances.</p>
 
 <h4>Compress Record Type</h4>
 
-<p>Fixed crash when ALG (algorithm) was changed to Average at runtime.</p>
+<p>Fixed a crash when ALG (algorithm) was changed to Average at runtime.</p>
 
 <h4>configure/RELEASE Enhancements</h4>
 
@@ -148,9 +521,11 @@ definition is expanded.  The variable <tt>EPICS_HOST_ARCH</tt> can now be used,
 but target-architecture-specific values must be set in a target-specific
 <tt>configure/RELEASE</tt> file such as <tt>RELEASE.Common.linux-x86</tt>.</p>
 
-<h4>VxWorks 6.7 support</h4>
+<h4>VxWorks 6.7 and 6.8 support</h4>
 
-<p>Added build support for the latest Wind River release.</p>
+<p>Added build support for the latest Wind River releases.  This does not
+include the ability to run on SMP vxWorks systems though, those will need some
+more extensive modifications.</p>
 
 <h4>RTEMS 4.10 support</h4>
 
@@ -162,7 +537,7 @@ is used.</p>
 
 <p>Changes to the way in which we generate header dependency files, which are
 now named with a <tt>.d</tt> suffix instead of <tt>.depends</tt>.  We now use
-the compiler to generate these if possible, and create them in the
+the compiler to generate these where possible, and create them in the
 <tt>O.$(T_A)</tt> directory.</p>
 
 <h4>Installed file permissions</h4>
@@ -184,7 +559,11 @@ server.</p>
 readline; some need <tt>-lcurses</tt>, others <tt>-lncurses</tt> and others
 don't require either.  The <tt>configure/os/CONFIG_SITE.Common.linux-*</tt>
 files now make this configuration easy to choose between different settings for
-the <tt>COMMANDLINE_LIBRARY</tt> variable.</p>
+the <tt>COMMANDLINE_LIBRARY</tt> variable.  If your build fails as it's trying
+to create the <tt>antelope</tt> binary in the Base directory
+<tt>src/toolsComm/antelope/O.<i>arch</i></tt> this is almost certainly the
+problem. You will need to do a <tt>make rebuild</tt> from the top of Base after
+fixing the setting of <tt>COMMANDLINE_LIBRARY</tt>.</p>
 
 <h4>CA Command Line Tools Changes</h4>
 

src/RTEMS/base/Makefile

@@ -12,15 +12,14 @@ include $(TOP)/configure/CONFIG
 
 INC += epicsRtemsInitHooks.h
 
-SRCS += rtems_init.c
-SRCS += rtems_config.c
-SRCS += rtems_netconfig.c
-SRCS += rtems_util.c
-SRCS += setBootConfigFromNVRAM.c
-SRCS += epicsRtemsInitHookPre.c
-SRCS += epicsRtemsInitHookPost.c
+rtemsCom_SRCS += rtems_init.c
+rtemsCom_SRCS += rtems_config.c
+rtemsCom_SRCS += rtems_netconfig.c
+rtemsCom_SRCS += rtems_util.c
+rtemsCom_SRCS += setBootConfigFromNVRAM.c
+rtemsCom_SRCS += epicsRtemsInitHookPre.c
+rtemsCom_SRCS += epicsRtemsInitHookPost.c
 
 LIBRARY_RTEMS = rtemsCom
-LIBRARY_SRCS = $(SRCS) $(BUILD_ARCHS)
 
 include $(TOP)/configure/RULES

src/RTEMS/base/rtems_init.c

@@ -209,7 +209,17 @@ initialize_remote_filesystem(char **argv, int hasLocalFilesystem)
 {
 #ifdef OMIT_NFS_SUPPORT
     printf ("***** Initializing TFTP *****\n");
+#if __RTEMS_MAJOR__>4 || \
+   (__RTEMS_MAJOR__==4 && __RTEMS_MINOR__>9) || \
+   (__RTEMS_MAJOR__==4 && __RTEMS_MINOR__==9 && __RTEMS_REVISION__==99)
+    mount_and_make_target_path(NULL,
+                               "/TFTP",
+                               RTEMS_FILESYSTEM_TYPE_TFTPFS,
+                               RTEMS_FILESYSTEM_READ_WRITE,
+                               NULL);
+#else
     rtems_bsdnet_initialize_tftp_filesystem ();
+#endif
     if (!hasLocalFilesystem) {
         char *path;
         int pathsize = 200;

src/RTEMS/base/rtems_netconfig.c

@@ -1,7 +1,6 @@
 /*************************************************************************\
 * Copyright (c) 2002 The University of Saskatchewan
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 /*
@@ -93,6 +92,17 @@ static struct rtems_bsdnet_ifconfig bsp_driver_config = {
 # define MY_DO_BOOTP rtems_bsdnet_do_bootp
 #endif
 
+/*
+ * Allow site- and BSP-specific network buffer space configuration.
+ * The macro values are specified in KBytes.
+ */
+#ifndef RTEMS_NETWORK_CONFIG_MBUF_SPACE
+# define RTEMS_NETWORK_CONFIG_MBUF_SPACE 180
+#endif
+#ifndef RTEMS_NETWORK_CONFIG_CLUSTER_SPACE
+# define RTEMS_NETWORK_CONFIG_CLUSTER_SPACE 350
+#endif
+
 /*
  * Network configuration
  */
@@ -104,8 +114,8 @@ struct rtems_bsdnet_config rtems_bsdnet_config = {
                            /*   EPICS scan thread. */
                            /* If non-zero then the network daemons will run */
                            /*   at this *RTEMS* priority */
-    180*1024,              /* MBUF space */
-    350*1024,              /* MBUF cluster space */
+    RTEMS_NETWORK_CONFIG_MBUF_SPACE*1024,
+    RTEMS_NETWORK_CONFIG_CLUSTER_SPACE*1024,
     NULL,                  /* Host name */
     MY_DOMAINNAME,         /* Domain name */
 };

src/RTEMS/base/setBootConfigFromNVRAM.c

@@ -1,8 +1,16 @@
+/*************************************************************************\
+* Copyright (c) 2008 UChicago Argonne LLC, as Operator of Argonne
+*     National Laboratory.
+* EPICS BASE is distributed subject to a Software License Agreement found
+* in file LICENSE that is included with this distribution.
+\*************************************************************************/
+
 #include <sys/types.h>
 #include <sys/socket.h>
 #include <arpa/inet.h>
 #include <netinet/in.h>
-#include <fcntl.h> /* for open() */
+#include <fcntl.h>
+#include <unistd.h>
 #include <rtems/rtems_bsdnet.h>
 #include <bsp.h>
 #include <string.h>
@@ -125,12 +133,13 @@ motScriptParm(const char *mot_script_boot, char parm)
     int l;
 
     while (*mot_script_boot != '\0') {
-        if (isspace(*mot_script_boot)
+        if (isspace(*(unsigned char *)mot_script_boot)
          && (*(mot_script_boot+1) == '-')
          && (*(mot_script_boot+2) == parm)) {
             mot_script_boot += 3;
             cp = mot_script_boot;
-            while ((*mot_script_boot != '\0') && !isspace(*mot_script_boot))
+            while ((*mot_script_boot != '\0') &&
+                   !isspace(*(unsigned char *)mot_script_boot))
                 mot_script_boot++;
             l = mot_script_boot - cp;
             ret = malloc(l+1);

src/bpt/Makefile

@@ -22,7 +22,8 @@ DBD += bptTypeKdegF.dbd
 
 PROD_LIBS = Com
 PROD_HOST += makeBpt
-makeBpt_SRCS=makeBpt
+
+makeBpt_SRCS = makeBpt
 
 include $(TOP)/configure/RULES
 

src/ca/CAref.html

@@ -64,6 +64,7 @@ $Date$</span></small></p>
   <li><a href="#Network">IP Network Administration Background
   Information</a></li>
   <li><a href="#port">IP port numbers</a></li>
+  <li><a href="#firewall">Firewalls</a></li>
   <li><a href="#Environmen">WAN Environment</a></li>
   <li><a href="#Disconnect">Disconnect Time Out Interval / Server Beacon
     Period</a></li>
@@ -245,7 +246,7 @@ $Date$</span></small></p>
 
 <h3>Why Reconfigure Channel Access</h3>
 
-<p>Typically reasons to reconfigure EPICS Channel Access:</p>
+<p>Typical reasons to reconfigure EPICS Channel Access:</p>
 <ul>
   <li>Two independent control systems must share a network without fear of
     interaction</li>
@@ -451,6 +452,32 @@ different port numbers then an extended syntax may be used with the
 EPICS_CA_ADDR_LIST environment variable. See <a href="#Environmen">WAN
 Environment</a> below.</p>
 
+<h3><a name="firewall">Firewalls</a></h3>
+
+<p>If you want channel access clients on a machine to be able to see
+beacons and replies to broadcast PV search requests you need to permit
+inbound UDP packets with source port EPICS_CA_SERVER_PORT (default is 5064)
+or destination port EPICS_CA_REPEATER_PORT (default is 5065). On systems
+using iptables this can be accomplished by rules like</p>
+
+<pre>
+     -A INPUT -s 192.168.0.0/22 -p udp --sport 5064 -j ACCEPT
+     -A INPUT -s 192.168.0.0/22 -p udp --dport 5065 -j ACCEPT
+</pre>
+
+<p>If you want channel access servers (e.g. "soft IOCs") on a machine to be
+able to see clients you need to permit inbound TCP or UDP packets with source
+port EPICS_CA_SERVER_PORT (default is 5064).  On systems using iptables this
+can be accomplished by rules like</p>
+
+<pre>
+     -A INPUT -s 192.168.0.0/22 -p udp --dport 5064 -j ACCEPT
+     -A INPUT -s 192.168.0.0/22 -p tcp --dport 5064 -j ACCEPT
+</pre>
+
+<p>In all cases the "-s 192.168.0.0/22" specifies the range of addresses from
+which you wish to accept packets.</p>
+
 <h3><a name="Environmen">WAN Environment</a></h3>
 
 <p>When the CA client library connects a channel it must first determine the IP
@@ -1295,7 +1322,7 @@ the output.</p>
     </tr>
     <tr>
       <td>-s</td>
-      <td>Get value as string (may honour server-side precision)</td>
+      <td>Get value as string (honors server-side precision)</td>
     </tr>
     <tr>
       <td>-lx</td>
@@ -1439,7 +1466,7 @@ the output.</p>
     </tr>
     <tr>
       <td>-s</td>
-      <td>Get value as string (may honour server-side precision)</td>
+      <td>Get value as string (honors server-side precision)</td>
     </tr>
     <tr>
       <td>-lx</td>
@@ -4332,7 +4359,7 @@ that use ca_context_destroy).</p>
 <p><a href="#ca_context_destroy">ca_context_destroy</a>()</p>
 
 <h3><code><a name="ca_dump_dbr">ca_dump_dbr()</a></code></h3>
-<pre>void ca_dump_dbr (chtype TYPE, unsigned COUNT, const void * PDBR);</pre>
+<code><pre>void ca_dump_dbr (chtype TYPE, unsigned COUNT, const void * PDBR);</pre></code>
 
 <h4>Description</h4>
 

src/ca/Makefile

@@ -92,7 +92,7 @@ PROD_LIBS = ca Com
 PROD_SYS_LIBS_WIN32 = ws2_32 advapi32 user32
 
 PROD_HOST += caRepeater catime acctst caConnTest casw caEventRate
-OBJS_IOC_vxWorks += catime acctst caConnTest casw caEventRate
+OBJS_IOC += catime acctst caConnTest casw caEventRate acctstRegister
 caRepeater_SRCS = caRepeater.cpp
 catime_SRCS = catimeMain.c catime.c 
 acctst_SRCS = acctstMain.c acctst.c 

src/ca/acctst.c

@@ -10,6 +10,10 @@
 
 /*
  * CA regression test
+ * Authors:
+ * Jeff Hill
+ * Murali Shankar - initial versions of verifyMultithreadSubscr
+ * 
  */
 
 /*
@@ -26,6 +30,8 @@
  */
 #define epicsAssertAuthor "Jeff Hill johill@lanl.gov"
 #include "epicsAssert.h"
+#include "epicsMutex.h"
+#include "epicsEvent.h"
 #include "epicsTime.h"
 #include "dbDefs.h"
 #include "envDefs.h"
@@ -2719,6 +2725,186 @@ void fdRegCB ( void * parg, int fd, int opened )
     }
 }
 
+typedef struct {
+    char m_chanName[100u];
+    struct ca_client_context * m_pCtx;
+    chid m_chan;
+    epicsMutexId m_mutex;
+    epicsEventId m_testCompleteEvent;
+    epicsEventId m_threadExitEvent;
+    size_t m_nUpdatesReceived;
+    size_t m_nUpdatesRequired;
+    int m_testInitiated;
+    int m_testComplete;
+    unsigned m_interestLevel;
+} MultiThreadSubscrTest;
+
+static void testMultithreadSubscrSubscrCallback 
+                        ( struct event_handler_args eha )
+{
+    const epicsEventId firstUpdateEvent = ( epicsEventId ) eha.usr;
+    epicsEventSignal ( firstUpdateEvent );
+}
+
+static void testMultithreadSubscrCreateSubscr ( void * pParm ) 
+{
+    static unsigned nElem = 0;
+    int testComplete = FALSE;
+    evid id;
+    epicsEventId firstUpdateEvent;
+    epicsEventWaitStatus eventWaitStatus;   
+    MultiThreadSubscrTest * const pMultiThreadSubscrTest = 
+                                ( MultiThreadSubscrTest * ) pParm;
+
+    /* this is required for the ca_flush below to work correctly */
+    int status = ca_attach_context ( pMultiThreadSubscrTest->m_pCtx );
+    verify ( status == ECA_NORMAL );
+    firstUpdateEvent = epicsEventMustCreate ( epicsEventEmpty );
+    verify ( firstUpdateEvent );
+    status = ca_create_subscription ( 
+                            DBR_TIME_LONG, 
+                            nElem, 
+                            pMultiThreadSubscrTest->m_chan, 
+                            DBE_VALUE, 
+                            testMultithreadSubscrSubscrCallback, 
+                            firstUpdateEvent, 
+                            & id );
+    verify ( status == ECA_NORMAL );
+    status = ca_flush_io ();
+    verify ( status == ECA_NORMAL );
+    /* wait for first update */
+    eventWaitStatus = epicsEventWaitWithTimeout ( 
+                            firstUpdateEvent, 60.0 * 10 );
+    verify ( eventWaitStatus ==  epicsEventWaitOK );
+    epicsEventDestroy ( firstUpdateEvent );
+    status = ca_clear_subscription ( id );
+    verify ( status == ECA_NORMAL );
+    epicsMutexMustLock ( pMultiThreadSubscrTest->m_mutex );
+    pMultiThreadSubscrTest->m_nUpdatesReceived++;
+    testComplete = ( pMultiThreadSubscrTest->m_nUpdatesReceived == 
+                    pMultiThreadSubscrTest->m_nUpdatesRequired );
+    pMultiThreadSubscrTest->m_testComplete = testComplete;
+    epicsMutexUnlock ( pMultiThreadSubscrTest->m_mutex );
+    if ( testComplete ) {
+        epicsEventSignal ( pMultiThreadSubscrTest->m_testCompleteEvent );
+    }
+}
+
+void testMultithreadSubscrConnHandler ( struct connection_handler_args args )
+{
+    MultiThreadSubscrTest * const pMultiThreadSubscrTest = 
+                        ( MultiThreadSubscrTest * ) ca_puser ( args.chid );
+    epicsMutexMustLock ( pMultiThreadSubscrTest->m_mutex );
+    if ( !pMultiThreadSubscrTest->m_testInitiated && 
+            args.op == CA_OP_CONN_UP ) {
+        int i;
+        pMultiThreadSubscrTest->m_testInitiated = TRUE;
+        for ( i = 0; i < pMultiThreadSubscrTest->m_nUpdatesRequired; i++ ) {
+            char threadname[64];
+            epicsThreadId threadId;
+            sprintf(threadname, "testSubscr%06u", i);
+            threadId = epicsThreadCreate ( threadname, 
+                        epicsThreadPriorityMedium, 
+                        epicsThreadGetStackSize(epicsThreadStackSmall), 
+                        testMultithreadSubscrCreateSubscr, 
+                        pMultiThreadSubscrTest );
+            verify ( threadId );
+        }
+    }
+    epicsMutexUnlock ( pMultiThreadSubscrTest->m_mutex );
+}
+
+void testMultithreadSubscr ( void * pParm )
+{
+    MultiThreadSubscrTest * const pMultiThreadSubscrTest = 
+                                ( MultiThreadSubscrTest * ) pParm;
+    int status;
+    unsigned i;
+
+    status = ca_context_create ( ca_enable_preemptive_callback );
+    verify ( status == ECA_NORMAL );
+    pMultiThreadSubscrTest->m_pCtx = ca_current_context ();
+    verify ( pMultiThreadSubscrTest->m_pCtx );
+    status = ca_create_channel (
+                pMultiThreadSubscrTest->m_chanName,
+                testMultithreadSubscrConnHandler,
+                pMultiThreadSubscrTest,
+                CA_PRIORITY_MIN, 
+                & pMultiThreadSubscrTest->m_chan );
+    verify ( status == ECA_NORMAL );
+
+    showProgressBegin ( "verifyMultithreadSubscr", 
+            pMultiThreadSubscrTest->m_interestLevel );
+    i = 0;
+    while ( TRUE ) {
+        int success = FALSE;
+        epicsEventWaitStatus eventWaitStatus;
+        epicsMutexMustLock ( pMultiThreadSubscrTest->m_mutex );
+        success = pMultiThreadSubscrTest->m_testComplete;
+        epicsMutexUnlock ( pMultiThreadSubscrTest->m_mutex );
+        if ( success ) {
+            break;
+        }
+        eventWaitStatus = epicsEventWaitWithTimeout ( 
+                            pMultiThreadSubscrTest->m_testCompleteEvent, 0.1 );
+        verify ( eventWaitStatus ==  epicsEventWaitOK || 
+                eventWaitStatus ==  epicsEventWaitTimeout );
+        if ( i++ % 100 == 0u ) 
+            showProgress ( pMultiThreadSubscrTest->m_interestLevel );
+        verify ( i < 1000 );
+    }
+    showProgressEnd ( pMultiThreadSubscrTest->m_interestLevel );
+
+    status = ca_clear_channel ( pMultiThreadSubscrTest->m_chan );
+    verify ( status == ECA_NORMAL );
+    ca_context_destroy ();
+    epicsEventSignal ( pMultiThreadSubscrTest->m_threadExitEvent );
+}
+
+/*
+ * test installation of subscriptions similar to usage paterns
+ * employed by modern versions of the sequencer
+ */
+void verifyMultithreadSubscr ( const char * pName, unsigned interestLevel )
+{
+    static unsigned nSubscr = 3000;
+    epicsThreadId threadId;
+    MultiThreadSubscrTest * const pMultiThreadSubscrTest = 
+                                (MultiThreadSubscrTest*) calloc ( 1, 
+                                    sizeof ( MultiThreadSubscrTest ) );
+    verify ( pMultiThreadSubscrTest);
+    pMultiThreadSubscrTest->m_mutex = epicsMutexMustCreate ();
+    verify ( pMultiThreadSubscrTest->m_mutex );
+    pMultiThreadSubscrTest->m_testCompleteEvent = 
+                epicsEventMustCreate ( epicsEventEmpty );
+    verify ( pMultiThreadSubscrTest->m_testCompleteEvent );
+    pMultiThreadSubscrTest->m_threadExitEvent = 
+                epicsEventMustCreate ( epicsEventEmpty );
+    verify ( pMultiThreadSubscrTest->m_threadExitEvent );
+    strncpy ( pMultiThreadSubscrTest->m_chanName, pName, 
+            sizeof ( pMultiThreadSubscrTest->m_chanName ) );
+    pMultiThreadSubscrTest->m_chanName
+        [ sizeof ( pMultiThreadSubscrTest->m_chanName ) - 1u ] = '\0';
+    pMultiThreadSubscrTest->m_nUpdatesRequired = nSubscr;
+    pMultiThreadSubscrTest->m_interestLevel = interestLevel;
+    threadId = epicsThreadCreate ( 
+                "testMultithreadSubscr", 
+                epicsThreadPriorityMedium, 
+                epicsThreadGetStackSize(epicsThreadStackSmall), 
+                testMultithreadSubscr, pMultiThreadSubscrTest );
+    verify ( threadId );
+    {
+        epicsEventWaitStatus eventWaitStatus;
+        eventWaitStatus = epicsEventWaitWithTimeout ( 
+                pMultiThreadSubscrTest->m_threadExitEvent, 1000.0 );
+        verify  ( eventWaitStatus == epicsEventWaitOK );
+    }
+    epicsEventDestroy ( pMultiThreadSubscrTest->m_testCompleteEvent );
+    epicsEventDestroy ( pMultiThreadSubscrTest->m_threadExitEvent );
+    epicsMutexDestroy ( pMultiThreadSubscrTest->m_mutex );
+    free ( pMultiThreadSubscrTest );
+}
+
 void fdManagerVerify ( const char * pName, unsigned interestLevel )
 {
     int status;
@@ -2965,17 +3151,22 @@ void verifyContextRundownFlush ( const char * pName, unsigned interestLevel )
             SEVCHK ( status, "context create failed" );
             
             status = ca_create_channel  ( pName, 0, 0, 0, & chan );
-            SEVCHK ( status, NULL );
-            
-            status = ca_pend_io( timeoutToPendIO );
-            SEVCHK ( status, "channel connect failed" );
-            
-            status = ca_put ( DBR_DOUBLE, chan, & stim );
-            SEVCHK ( status, "channel put failed" );
-    
-            status = ca_clear_channel ( chan );
-            SEVCHK ( status, NULL );
-    
+            /*
+             * currently in-memory channels cant be used with this test
+             * !!!! FIX ME, FIX ME, FIX ME, FIX ME !!!!
+             */
+            if ( status != ECA_UNAVAILINSERV ) {
+                SEVCHK ( status, NULL );
+                
+                status = ca_pend_io( timeoutToPendIO );
+                SEVCHK ( status, "channel connect failed" );
+                
+                status = ca_put ( DBR_DOUBLE, chan, & stim );
+                SEVCHK ( status, "channel put failed" );
+        
+                status = ca_clear_channel ( chan );
+                SEVCHK ( status, NULL );
+            }
             ca_context_destroy ();
         }
         
@@ -2985,24 +3176,28 @@ void verifyContextRundownFlush ( const char * pName, unsigned interestLevel )
             dbr_double_t resp;
             status = ca_context_create ( ca_disable_preemptive_callback );
             SEVCHK ( status, "context create failed" );
-            
+           
             status = ca_create_channel  ( pName, 0, 0, 0, & chan );
             SEVCHK ( status, NULL );
-            
-            status = ca_pend_io( timeoutToPendIO );
-            SEVCHK ( status, "channel connect failed" );
-    
-            status = ca_get ( DBR_DOUBLE, chan, & resp );
-            SEVCHK ( status, "channel get failed" );
-    
-            status = ca_pend_io ( timeoutToPendIO );
-            SEVCHK ( status, "get, pend io failed" );
-            
-            verify ( stim == resp );
-    
-            status = ca_clear_channel ( chan );
-            SEVCHK ( status, NULL );
-    
+            /*
+             * currently in-memory channels cant be used with this test
+             * !!!! FIX ME, FIX ME, FIX ME, FIX ME !!!!
+             */
+            if ( status != ECA_UNAVAILINSERV ) {
+                status = ca_pend_io( timeoutToPendIO );
+                SEVCHK ( status, "channel connect failed" );
+        
+                status = ca_get ( DBR_DOUBLE, chan, & resp );
+                SEVCHK ( status, "channel get failed" );
+        
+                status = ca_pend_io ( timeoutToPendIO );
+                SEVCHK ( status, "get, pend io failed" );
+                
+                verify ( stim == resp );
+        
+                status = ca_clear_channel ( chan );
+                SEVCHK ( status, NULL );
+            }
             ca_context_destroy ();
         }
 
@@ -3028,6 +3223,13 @@ void verifyContextRundownChanStillExist (
     
     for ( i = 0; i < NELEMENTS ( chan ); i++ ) {
         status = ca_create_channel  ( pName, 0, 0, 0, & chan[i] );
+        /*
+         * currently in-memory channels cant be used with this test
+         * !!!! FIX ME, FIX ME, FIX ME, FIX ME !!!!
+         */
+        if ( status == ECA_UNAVAILINSERV ) {
+            break;
+        }
         SEVCHK ( status, NULL );
     }
     
@@ -3123,6 +3325,7 @@ int acctst ( const char * pName, unsigned interestLevel, unsigned channelCount,
     verifyHighThroughputReadCallback ( chan, interestLevel );
     verifyHighThroughputWriteCallback ( chan, interestLevel );
     verifyBadString ( chan, interestLevel );
+    verifyMultithreadSubscr ( pName, interestLevel );
     if ( select != ca_enable_preemptive_callback ) {
         fdManagerVerify ( pName, interestLevel ); 
     }

src/ca/acctstRegister.cpp

@@ -0,0 +1,69 @@
+/*************************************************************************\
+* Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+*     National Laboratory.
+* Copyright (c) 2002 The Regents of the University of California, as
+*     Operator of Los Alamos National Laboratory.
+* EPICS BASE is distributed subject to a Software License Agreement found
+* in file LICENSE that is included with this distribution.
+\*************************************************************************/
+
+/*
+ * CA client library diagnostics IOC shell registration
+ * Authors:
+ * Jeff Hill
+ */
+
+#include <iocsh.h>
+#include "caDiagnostics.h"
+
+/* Information needed by iocsh */
+static const iocshArg     acctstArg0 = { "channel name", iocshArgString };
+static const iocshArg     acctstArg1 = { "interest level", iocshArgInt };
+static const iocshArg     acctstArg2 = { "channel count", iocshArgInt };
+static const iocshArg     acctstArg3 = { "repetition count", iocshArgInt };
+static const iocshArg     acctstArg4 = { "preemptive callback select", iocshArgInt };
+
+static const iocshArg    *acctstArgs[] =
+{
+    &acctstArg0,
+    &acctstArg1,
+    &acctstArg2,
+    &acctstArg3,
+    &acctstArg4
+};
+static const iocshFuncDef acctstFuncDef = {"acctst", 5, acctstArgs};
+
+
+/* Wrapper called by iocsh, selects the argument types that print needs */
+static void acctstCallFunc(const iocshArgBuf *args) {
+    if ( args[1].ival <  0 ) {
+        printf ( "negative interest level not allowed\n" );
+        return;
+    }
+    if ( args[2].ival <  0 ) {
+        printf ( "negative channel count not allowed\n" );
+        return;
+    }
+    if ( args[3].ival <  0 ) {
+        printf ( "negative repetition count not allowed\n" );
+        return;
+    }
+    acctst (
+        args[0].sval, /* channel name */
+        ( unsigned ) args[1].ival, /* interest level */
+        ( unsigned ) args[2].ival, /* channel count */
+        ( unsigned ) args[3].ival, /* repetition count */
+        ( ca_preemptive_callback_select ) args[4].ival );  /* preemptive callback select */
+}
+
+struct AutoInit {
+    AutoInit ();
+};
+
+AutoInit :: AutoInit () 
+{
+    iocshRegister ( &acctstFuncDef, acctstCallFunc );
+}
+
+AutoInit autoInit;
+

src/ca/bhe.cpp

@@ -360,6 +360,6 @@ void bheFreeStore::release ( void * pCadaver )
     freeList.release ( pCadaver );
 }
 
-epicsShareFunc bheMemoryManager::~bheMemoryManager () {}
+bheMemoryManager::~bheMemoryManager () {}
 
 

src/ca/bhe.h

@@ -45,9 +45,9 @@ class bheMemoryManager;
 
 // using a pure abstract wrapper class around the free list avoids
 // Tornado 2.0.1 GNU compiler bugs
-class bheMemoryManager {
+class epicsShareClass bheMemoryManager {
 public:
-    epicsShareFunc virtual ~bheMemoryManager ();
+    virtual ~bheMemoryManager ();
     virtual void * allocate ( size_t ) = 0;
     virtual void release ( void * ) = 0;
 };

src/ca/cac.h

@@ -266,8 +266,8 @@ private:
     // **** lock hierarchy ****
     // 1) callback lock must always be acquired before
     // the primary mutex if both locks are needed
-    mutable epicsMutex & mutex; 
-    mutable epicsMutex & cbMutex; 
+    epicsMutex & mutex;
+    epicsMutex & cbMutex;
     epicsEvent iiuUninstall;
     ipAddrToAsciiEngine & ipToAEngine;
     epicsTimerQueueActive & timerQueue;

src/ca/cadef.h

@@ -185,7 +185,8 @@ epicsShareFunc enum channel_state epicsShareAPI ca_state (chid chan);
 epicsShareFunc int epicsShareAPI ca_task_initialize (void);
 enum ca_preemptive_callback_select 
 { ca_disable_preemptive_callback, ca_enable_preemptive_callback };
-epicsShareFunc int epicsShareAPI ca_context_create (enum ca_preemptive_callback_select select);
+epicsShareFunc int epicsShareAPI 
+        ca_context_create (enum ca_preemptive_callback_select select);
 epicsShareFunc void epicsShareAPI ca_detach_context (); 
 
 /************************************************************************/

src/ca/repeaterSubscribeTimer.h

@@ -28,6 +28,18 @@
 
 #include "epicsTimer.h"
 
+#ifdef epicsExportSharedSymbols
+#   define repeaterSubscribeTimerh_epicsExportSharedSymbols
+#   undef epicsExportSharedSymbols
+#endif
+
+#include "epicsTimer.h"
+
+#ifdef repeaterSubscribeTimerh_epicsExportSharedSymbols
+#   define epicsExportSharedSymbols
+#   include "shareLib.h"
+#endif
+
 class epicsMutex;
 class cacContextNotify;
 

src/ca/tcpRecvWatchdog.h

@@ -26,8 +26,18 @@
 #ifndef tcpRecvWatchdogh  
 #define tcpRecvWatchdogh
 
+#ifdef epicsExportSharedSymbols
+#   define tcpRecvWatchdogh_epicsExportSharedSymbols
+#   undef epicsExportSharedSymbols
+#endif
+
 #include "epicsTimer.h"
 
+#ifdef tcpRecvWatchdogh_epicsExportSharedSymbols
+#   define epicsExportSharedSymbols
+#   include "shareLib.h"
+#endif
+
 class tcpiiu;
 
 class tcpRecvWatchdog : private epicsTimerNotify {

src/ca/tcpSendWatchdog.h

@@ -26,8 +26,19 @@
 #ifndef tcpSendWatchdogh  
 #define tcpSendWatchdogh
 
+
+#ifdef epicsExportSharedSymbols
+#   define tcpSendWatchdogh_epicsExportSharedSymbols
+#   undef epicsExportSharedSymbols
+#endif
+
 #include "epicsTimer.h"
 
+#ifdef tcpSendWatchdogh_epicsExportSharedSymbols
+#   define epicsExportSharedSymbols
+#   include "shareLib.h"
+#endif
+
 class tcpSendWatchdog : private epicsTimerNotify {
 public:
     tcpSendWatchdog (

src/ca/tcpiiu.cpp

@@ -1866,10 +1866,14 @@ void tcpiiu::unlinkAllChannels (
     guard.assertIdenticalMutex ( this->mutex );
 
     while ( nciu * pChan = this->createReqPend.get () ) {
+        pChan->channelNode::listMember = 
+            channelNode::cs_none;
         pChan->serviceShutdownNotify ( cbGuard, guard );
     }
 
     while ( nciu * pChan = this->createRespPend.get () ) {
+        pChan->channelNode::listMember = 
+            channelNode::cs_none;
         // we dont yet know the server's id so we cant
         // send a channel delete request and will instead 
         // trust that the server can do the proper cleanup
@@ -1878,12 +1882,16 @@ void tcpiiu::unlinkAllChannels (
     }
     
     while ( nciu * pChan = this->v42ConnCallbackPend.get () ) {
+        pChan->channelNode::listMember = 
+            channelNode::cs_none;
         this->clearChannelRequest ( guard, 
             pChan->getSID(guard), pChan->getCID(guard) );
         pChan->serviceShutdownNotify ( cbGuard, guard );
     }
 
     while ( nciu * pChan = this->subscripReqPend.get () ) {
+        pChan->channelNode::listMember = 
+            channelNode::cs_none;
         pChan->disconnectAllIO ( cbGuard, guard );
         this->clearChannelRequest ( guard, 
             pChan->getSID(guard), pChan->getCID(guard) );
@@ -1891,6 +1899,8 @@ void tcpiiu::unlinkAllChannels (
     }
 
     while ( nciu * pChan = this->connectedList.get () ) {
+        pChan->channelNode::listMember = 
+            channelNode::cs_none;
         pChan->disconnectAllIO ( cbGuard, guard );
         this->clearChannelRequest ( guard, 
             pChan->getSID(guard), pChan->getCID(guard) );
@@ -1898,6 +1908,8 @@ void tcpiiu::unlinkAllChannels (
     }
 
     while ( nciu * pChan = this->unrespCircuit.get () ) {
+        pChan->channelNode::listMember = 
+            channelNode::cs_none;
         pChan->disconnectAllIO ( cbGuard, guard );
         // if we know that the circuit is unresponsive
         // then we dont send a channel delete request and 
@@ -1907,6 +1919,8 @@ void tcpiiu::unlinkAllChannels (
     }
     
      while ( nciu * pChan = this->subscripUpdateReqPend.get () ) {
+        pChan->channelNode::listMember = 
+            channelNode::cs_none;
         pChan->disconnectAllIO ( cbGuard, guard );
         this->clearChannelRequest ( guard, 
             pChan->getSID(guard), pChan->getCID(guard) );

src/ca/udpiiu.cpp

@@ -81,8 +81,9 @@ udpiiu::udpiiu (
         cac::lowestPriorityLevelAbove (
             cac::lowestPriorityLevelAbove (
                 cac.getInitializingThreadsPriority () ) ) ),
+    m_repeaterTimerNotify ( *this ),
     repeaterSubscribeTmr (
-        *this, timerQueue, cbMutexIn, ctxNotifyIn ),
+        m_repeaterTimerNotify, timerQueue, cbMutexIn, ctxNotifyIn ),
     govTmr ( *this, timerQueue, cacMutexIn ),
     maxPeriod ( maxSearchPeriodDefault ),
     rtteMean ( minRoundTripEstimate ),
@@ -397,14 +398,14 @@ void udpRecvThread::run ()
 }
 
 /*
- *  udpiiu::repeaterRegistrationMessage ()
+ *  udpiiu::M_repeaterTimerNotify::repeaterRegistrationMessage ()
  *
  *  register with the repeater 
  */
-void udpiiu::repeaterRegistrationMessage ( unsigned attemptNumber )
+void udpiiu :: M_repeaterTimerNotify :: repeaterRegistrationMessage ( unsigned attemptNumber )
 {
-    epicsGuard < epicsMutex > cbGuard ( this->cacMutex );
-    caRepeaterRegistrationMessage ( this->sock, this->repeaterPort, attemptNumber );
+    epicsGuard < epicsMutex > cbGuard ( m_udpiiu.cacMutex );
+    caRepeaterRegistrationMessage ( m_udpiiu.sock, m_udpiiu.repeaterPort, attemptNumber );
 }
 
 /*
@@ -1233,16 +1234,16 @@ void udpiiu::govExpireNotify (
     this->ppSearchTmr[0]->installChannel ( guard, chan );
 }
 
-int udpiiu :: printFormated ( 
-    epicsGuard < epicsMutex > & cbGuard, 
-                    const char * pformat, ... )
+int udpiiu :: M_repeaterTimerNotify :: printFormated ( 
+                            epicsGuard < epicsMutex > & cbGuard, 
+                            const char * pformat, ... )
 {
     va_list theArgs;
     int status;
 
     va_start ( theArgs, pformat );
     
-    status = this->cacRef.varArgsPrintFormated ( cbGuard, pformat, theArgs );
+    status = m_udpiiu.cacRef.varArgsPrintFormated ( cbGuard, pformat, theArgs );
     
     va_end ( theArgs );
     

src/ca/udpiiu.h

@@ -88,8 +88,7 @@ static const double beaconAnomalySearchPeriod = 5.0; // seconds
 class udpiiu : 
     private netiiu, 
     private searchTimerNotify, 
-    private disconnectGovernorNotify,
-    private repeaterTimerNotify {
+    private disconnectGovernorNotify {
 public:
     udpiiu ( 
         epicsGuard < epicsMutex > & cacGuard,
@@ -139,9 +138,24 @@ private:
     private:
         udpiiu & _udpiiu;
     };
+    class M_repeaterTimerNotify : 
+        public repeaterTimerNotify {
+    public:
+        M_repeaterTimerNotify ( udpiiu & iiu ) : 
+            m_udpiiu ( iiu ) {}
+        // repeaterTimerNotify
+        void repeaterRegistrationMessage ( 
+            unsigned attemptNumber );
+        int printFormated ( 
+            epicsGuard < epicsMutex > & callbackControl, 
+            const char * pformat, ... );
+    private:
+        udpiiu & m_udpiiu;
+    };
     char xmitBuf [MAX_UDP_SEND];   
     char recvBuf [MAX_UDP_RECV];
     udpRecvThread recvThread;
+    M_repeaterTimerNotify m_repeaterTimerNotify;
     repeaterSubscribeTimer repeaterSubscribeTmr;
     disconnectGovernorTimer govTmr;
     tsDLList < SearchDest > _searchDestList;
@@ -149,8 +163,8 @@ private:
     double rtteMean;
     double rtteMeanDev;
     cac & cacRef;
-    mutable epicsMutex & cbMutex;
-    mutable epicsMutex & cacMutex;
+    epicsMutex & cbMutex;
+    epicsMutex & cacMutex;
     epics_auto_ptr < epics_auto_ptr < class searchTimer >, eapt_array > ppSearchTmr;
     unsigned nBytesInXmitBuf;
     unsigned nTimers;
@@ -278,14 +292,6 @@ private:
     void govExpireNotify ( 
         epicsGuard < epicsMutex > &, nciu & );
 
-    // repeaterTimerNotify
-    void repeaterRegistrationMessage ( 
-        unsigned attemptNumber );
-
-    int printFormated ( 
-        epicsGuard < epicsMutex > & callbackControl, 
-        const char * pformat, ... );
-
 	udpiiu ( const udpiiu & );
 	udpiiu & operator = ( const udpiiu & );
 
@@ -294,6 +300,7 @@ private:
     // These are needed for the vxWorks 5.5 compiler:
     friend class udpiiu::SearchDestUDP;
     friend class udpiiu::SearchRespCallback;
+    friend class udpiiu::M_repeaterTimerNotify;
 };
 
 #endif // udpiiuh

src/cap5/Makefile

@@ -33,6 +33,12 @@ ifeq ($(findstring $(OS_CLASS),WIN32 cygwin32),)
   PERL_SCRIPTS += camonitor.pl
 
   PERL_MODULES += CA.pm
+
+  ifeq ($(findstring Host,$(VALID_BUILDS)),Host)
+    # Can only create docs in Host build
+    HTMLS_DIR = .
+    HTMLS = CA.html
+  endif
 endif
 
 Cap5_SRCS = Cap5.xs
@@ -40,12 +46,6 @@ Cap5_LIBS = ca Com
 Cap5_INCLUDES = -I$(shell $(PERL) ../perlConfig.pl archlib)/CORE
 Cap5_CFLAGS = $(shell $(PERL) ../perlConfig.pl ccflags)
 
-ifeq ($(findstring Host,$(VALID_BUILDS)),Host)
-  # Can only create docs in Host build
-  HTMLS_DIR = .
-  HTMLS = CA.html
-endif
-
 include $(TOP)/configure/RULES
 
 ifdef T_A

src/cas/build/Makefile

@@ -73,6 +73,13 @@ LIBSRCS += casDGIntfIO.cc
 LIBSRCS += casStreamIO.cc
 LIBSRCS += ipIgnoreEntry.cc
 
+# There is a bug in some vxWorks compilers that these work around:
+ifeq ($(VX_GNU_VERSION), 4.1.2)
+  casStreamOS_CXXFLAGS_vxWorks-ppc604_altivec = -O0
+  casStreamOS_CXXFLAGS_vxWorks-ppc604_long = -O0
+  casStreamOS_CXXFLAGS_vxWorks-ppc604 = -O0
+endif
+
 LIBSRCS_vxWorks += templateInstances.cpp
 
 LIBRARY = cas

src/cas/example/directoryService/Makefile

@@ -23,8 +23,8 @@ PROD_LIBS := cas ca gdd Com
 #
 PROD_SYS_LIBS_WIN32 := ws2_32 advapi32 user32
 
-SRCS += main.cc
-SRCS += directoryServer.cc
+caDirServ_SRCS += main.cc
+caDirServ_SRCS += directoryServer.cc
 
 PROD_HOST = caDirServ
 

src/cas/generic/st/casStreamOS.cc

@@ -321,7 +321,7 @@ inline void casStreamOS::disarmRecv ()
 //
 // casStreamOS::armSend()
 //
-inline void casStreamOS::armSend()
+void casStreamOS::armSend()
 {
 	if ( this->outBufBytesPending() == 0u ) {
 		return;

src/catools/caget.c

@@ -87,7 +87,7 @@ static void usage (void)
     "  -e <nr>: Use %%e format, with a precision of <nr> digits\n"
     "  -f <nr>: Use %%f format, with a precision of <nr> digits\n"
     "  -g <nr>: Use %%g format, with a precision of <nr> digits\n"
-    "  -s:      Get value as string (may honour server-side precision)\n"
+    "  -s:      Get value as string (honors server-side precision)\n"
     "  -lx:     Round to long integer and print as hex number\n"
     "  -lo:     Round to long integer and print as octal number\n"
     "  -lb:     Round to long integer and print as binary number\n"
@@ -126,7 +126,6 @@ static void event_handler (evargs args)
         ppv->dbrType = args.type;
         ppv->value   = calloc(1, dbr_size_n(args.type, args.count));
         memcpy(ppv->value, args.dbr, dbr_size_n(args.type, args.count));
-        ppv->onceConnected = 1;
         ppv->nElems = args.count;
         nRead++;
     }
@@ -159,12 +158,13 @@ static int caget (pv *pvs, int nPvs, RequestT request, OutputT format,
     int n, result;
 
     for (n = 0; n < nPvs; n++) {
+        unsigned long nElems;
 
                                 /* Set up pvs structure */
                                 /* -------------------- */
 
                                 /* Get natural type and array count */
-        pvs[n].nElems  = ca_element_count(pvs[n].chid);
+        nElems         = ca_element_count(pvs[n].chid);
         pvs[n].dbfType = ca_field_type(pvs[n].chid);
         pvs[n].dbrType = dbrType;
 
@@ -183,10 +183,6 @@ static int caget (pv *pvs, int nPvs, RequestT request, OutputT format,
                 pvs[n].dbrType = DBR_TIME_STRING;
             }
         }
-                                /* Adjust array count */
-        if (reqElems > pvs[n].nElems)
-            reqElems = pvs[n].nElems;
-        pvs[n].reqElems = reqElems;
 
                                 /* Issue CA request */
                                 /* ---------------- */
@@ -196,17 +192,20 @@ static int caget (pv *pvs, int nPvs, RequestT request, OutputT format,
             nConn++;
             pvs[n].onceConnected = 1;
             if (request == callback)
-            {                          /* Event handler will allocate value */
+            {
+                /* Event handler will allocate value and set nElems */
+                pvs[n].reqElems = reqElems > nElems ? nElems : reqElems;
                 result = ca_array_get_callback(pvs[n].dbrType,
                                                pvs[n].reqElems,
                                                pvs[n].chid,
                                                event_handler,
                                                (void*)&pvs[n]);
             } else {
-                                       /* Allocate value structure */
+                /* We allocate value structure and set nElems */
+                pvs[n].nElems = reqElems && reqElems < nElems ? reqElems : nElems;
                 pvs[n].value = calloc(1, dbr_size_n(pvs[n].dbrType, pvs[n].nElems));
-                if(!pvs[n].value) {
-                    fprintf(stderr,"Allocation failed\n");
+                if (!pvs[n].value) {
+                    fprintf(stderr,"Memory allocation failed\n");
                     return 1;
                 }
                 result = ca_array_get(pvs[n].dbrType,
@@ -252,9 +251,6 @@ static int caget (pv *pvs, int nPvs, RequestT request, OutputT format,
                                 /* -------------- */
 
     for (n = 0; n < nPvs; n++) {
-        /* Truncate the data printed to what was requested. */
-        if (pvs[n].reqElems != 0  && pvs[n].nElems > pvs[n].reqElems)
-            pvs[n].nElems = pvs[n].reqElems;
 
         switch (format) {
         case plain:             /* Emulate old caget behaviour */
@@ -377,7 +373,7 @@ static void complainIfNotPlainAndSet (OutputT *current, const OutputT requested)
 
 int main (int argc, char *argv[])
 {
-    int n = 0;
+    int n;
     int result;                 /* CA result */
     OutputT format = plain;     /* User specified format */
     RequestT request = get;     /* User specified request type */
@@ -389,9 +385,9 @@ int main (int argc, char *argv[])
     int digits = 0;             /* getopt() no. of float digits */
 
     int nPvs;                   /* Number of PVs */
-    pv* pvs = 0;                /* Array of PV structures */
+    pv* pvs;                    /* Array of PV structures */
 
-    setvbuf(stdout,NULL,_IOLBF,BUFSIZ);    /* Set stdout to line buffering */
+    LINE_BUFFER(stdout);        /* Configure stdout buffering */
 
     while ((opt = getopt(argc, argv, ":taicnhsSe:f:g:l:#:d:0:w:p:F:")) != -1) {
         switch (opt) {
@@ -529,7 +525,7 @@ int main (int argc, char *argv[])
     result = ca_context_create(ca_disable_preemptive_callback);
     if (result != ECA_NORMAL) {
         fprintf(stderr, "CA error %s occurred while trying "
-                "to start channel access '%s'.\n", ca_message(result), pvs[n].name);
+                "to start channel access.\n", ca_message(result));
         return 1;
     }
                                 /* Allocate PV structure array */

src/catools/cainfo.c

@@ -6,8 +6,7 @@
 *     Operator of Los Alamos National Laboratory.
 * Copyright (c) 2002 Berliner Elektronenspeicherringgesellschaft fuer
 *     Synchrotronstrahlung.
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 
@@ -128,15 +127,15 @@ int cainfo (pv *pvs, int nPvs)
 
 int main (int argc, char *argv[])
 {
-    int n = 0;
+    int n;
     int result;                 /* CA result */
 
     int opt;                    /* getopt() current option */
 
     int nPvs;                   /* Number of PVs */
-    pv* pvs = 0;                /* Array of PV structures */
+    pv* pvs;                    /* Array of PV structures */
 
-    setvbuf(stdout,NULL,_IOLBF,BUFSIZ);    /* Set stdout to line buffering */
+    LINE_BUFFER(stdout);        /* Configure stdout buffering */
 
     while ((opt = getopt(argc, argv, ":nhw:s:p:")) != -1) {
         switch (opt) {
@@ -196,7 +195,7 @@ int main (int argc, char *argv[])
     result = ca_context_create(ca_disable_preemptive_callback);
     if (result != ECA_NORMAL) {
         fprintf(stderr, "CA error %s occurred while trying "
-                "to start channel access '%s'.\n", ca_message(result), pvs[n].name);
+                "to start channel access.\n", ca_message(result));
         return 1;
     }
                                 /* Allocate PV structure array */

src/catools/camonitor.c

@@ -6,8 +6,7 @@
 *     Operator of Los Alamos National Laboratory.
 * Copyright (c) 2002 Berliner Elektronenspeicherringgesellschaft fuer
 *     Synchrotronstrahlung.
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 
@@ -43,45 +42,49 @@ static int nConn = 0;                                     /* Number of connected
 
 void usage (void)
 {
-    fprintf (stderr, "\nUsage: camonitor [options] <PV name> ...\n\n"
-    "  -h: Help: Print this message\n"
+    fprintf (stderr, "\nUsage: camonitor [options] <PV name> ...\n"
+    "\n"
+    "  -h:       Help; Print this message\n"
     "Channel Access options:\n"
-    "  -w <sec>:  Wait time, specifies CA timeout, default is %f second(s)\n"
-    "  -m <mask>: Specify CA event mask to use, with <mask> being any combination of\n"
-    "             'v' (value), 'a' (alarm), 'l' (log/archive), 'p' (property). Default: va\n"
-    "  -p <prio>: CA priority (0-%u, default 0=lowest)\n"
+    "  -w <sec>: Wait time, specifies CA timeout, default is %f second(s)\n"
+    "  -m <msk>: Specify CA event mask to use.  <msk> is any combination of\n"
+    "            'v' (value), 'a' (alarm), 'l' (log/archive), 'p' (property).\n"
+    "            Default event mask is 'va'\n"
+    "  -p <pri>: CA priority (0-%u, default 0=lowest)\n"
     "Timestamps:\n"
-    "  Default: Print absolute timestamps (as reported by CA server)\n"
-    "  -t <key>:  Specify timestamp source(s) and type, with <key> containing\n"
-    "             's' = CA server (remote) timestamps\n"
-    "             'c' = CA client (local) timestamps (shown in '()'s)\n"
-    "             'n' = no timestamps\n"
-    "             'r' = relative timestamps (time elapsed since start of program)\n"
-    "             'i' = incremental timestamps (time elapsed since last update)\n"
-    "             'I' = incremental timestamps (time elapsed since last update, by channel)\n"
+    "  Default:  Print absolute timestamps (as reported by CA server)\n"
+    "  -t <key>: Specify timestamp source(s) and type, with <key> containing\n"
+    "            's' = CA server (remote) timestamps\n"
+    "            'c' = CA client (local) timestamps (shown in '()'s)\n"
+    "            'n' = no timestamps\n"
+    "            'r' = relative timestamps (time elapsed since start of program)\n"
+    "            'i' = incremental timestamps (time elapsed since last update)\n"
+    "            'I' = incremental timestamps (time since last update, by channel)\n"
+    "            'r', 'i' or 'I' require 's' or 'c' to select the time source\n"
     "Enum format:\n"
-    "  -n: Print DBF_ENUM values as number (default are enum string values)\n"
-    "Arrays: Value format: print number of requested values, then list of values\n"
-    "  Default:    Print all values\n"
-    "  -# <count>: Print first <count> elements of an array\n"
-    "  -S:         Print array of char as a string (long string)\n"
-    "Floating point type format:\n"
-    "  Default: Use %%g format\n"
-    "  -e <nr>: Use %%e format, with a precision of <nr> digits\n"
-    "  -f <nr>: Use %%f format, with a precision of <nr> digits\n"
-    "  -g <nr>: Use %%g format, with a precision of <nr> digits\n"
-    "  -s:      Get value as string (may honour server-side precision)\n"
-    "  -lx:     Round to long integer and print as hex number\n"
-    "  -lo:     Round to long integer and print as octal number\n"
-    "  -lb:     Round to long integer and print as binary number\n"
+    "  -n:       Print DBF_ENUM values as number (default is enum string)\n"
+    "Array values: Print number of elements, then list of values\n"
+    "  Default:  Request and print all elements (dynamic arrays supported)\n"
+    "  -# <num>: Request and print up to <num> elements\n"
+    "  -S:       Print arrays of char as a string (long string)\n"
+    "Floating point format:\n"
+    "  Default:  Use %%g format\n"
+    "  -e <num>: Use %%e format, with a precision of <num> digits\n"
+    "  -f <num>: Use %%f format, with a precision of <num> digits\n"
+    "  -g <num>: Use %%g format, with a precision of <num> digits\n"
+    "  -s:       Get value as string (honors server-side precision)\n"
+    "  -lx:      Round to long integer and print as hex number\n"
+    "  -lo:      Round to long integer and print as octal number\n"
+    "  -lb:      Round to long integer and print as binary number\n"
     "Integer number format:\n"
-    "  Default: Print as decimal number\n"
-    "  -0x: Print as hex number\n"
-    "  -0o: Print as octal number\n"
-    "  -0b: Print as binary number\n"
+    "  Default:  Print as decimal number\n"
+    "  -0x:      Print as hex number\n"
+    "  -0o:      Print as octal number\n"
+    "  -0b:      Print as binary number\n"
     "Alternate output field separator:\n"
-    "  -F <ofs>: Use <ofs> as an alternate output field separator\n"
-    "\nExample: camonitor -f8 my_channel another_channel\n"
+    "  -F <ofs>: Use <ofs> to separate fields in output\n"
+    "\n"
+    "Example: camonitor -f8 my_channel another_channel\n"
     "  (doubles are printed as %%f with precision of 8)\n\n"
              , DEFAULT_TIMEOUT, CA_PRIORITY_MAX);
 }
@@ -93,7 +96,7 @@ void usage (void)
  * Function:	event_handler
  *
  * Description:	CA event_handler for request type callback
- * 		Allocates the dbr structure and copies the data
+ * 		Prints the event data
  *
  * Arg(s) In:	args  -  event handler args (see CA manual)
  *
@@ -108,10 +111,12 @@ static void event_handler (evargs args)
     {
         pv->dbrType = args.type;
         pv->nElems = args.count;
-        memcpy(pv->value, args.dbr, dbr_size_n(args.type, args.count));
+        pv->value = (void *) args.dbr;    /* casting away const */
 
         print_time_val_sts(pv, reqElems);
         fflush(stdout);
+
+        pv->value = NULL;
     }
 }
 
@@ -130,51 +135,39 @@ static void connection_handler ( struct connection_handler_args args )
 {
     pv *ppv = ( pv * ) ca_puser ( args.chid );
     if ( args.op == CA_OP_CONN_UP ) {
+        nConn++;
+        if (!ppv->onceConnected) {
+            ppv->onceConnected = 1;
                                 /* Set up pv structure */
                                 /* ------------------- */
 
                                 /* Get natural type and array count */
-        ppv->nElems  = ca_element_count(ppv->chid);
-        ppv->dbfType = ca_field_type(ppv->chid);
+            ppv->dbfType = ca_field_type(ppv->chid);
+            ppv->dbrType = dbf_type_to_DBR_TIME(ppv->dbfType); /* Use native type */
+            if (dbr_type_is_ENUM(ppv->dbrType))                /* Enums honour -n option */
+            {
+                if (enumAsNr) ppv->dbrType = DBR_TIME_INT;
+                else          ppv->dbrType = DBR_TIME_STRING;
+            }
+            else if (floatAsString &&
+                     (dbr_type_is_FLOAT(ppv->dbrType) || dbr_type_is_DOUBLE(ppv->dbrType)))
+            {
+                ppv->dbrType = DBR_TIME_STRING;
+            }
+                                /* Set request count */
+            ppv->nElems   = ca_element_count(ppv->chid);
+            ppv->reqElems = reqElems > ppv->nElems ? ppv->nElems : reqElems;
 
-                                /* Set up value structures */
-        ppv->dbrType = dbf_type_to_DBR_TIME(ppv->dbfType); /* Use native type */
-        if (dbr_type_is_ENUM(ppv->dbrType))                  /* Enums honour -n option */
-        {
-            if (enumAsNr) ppv->dbrType = DBR_TIME_INT;
-            else          ppv->dbrType = DBR_TIME_STRING;
-        }
-
-        else if (floatAsString &&
-                 (dbr_type_is_FLOAT(ppv->dbrType) || dbr_type_is_DOUBLE(ppv->dbrType)))
-        {
-            ppv->dbrType = DBR_TIME_STRING;
-        }
-                                /* Adjust array count */
-        if (reqElems > ppv->nElems)
-            reqElems = ppv->nElems;
-        ppv->reqElems = reqElems;
-
-        ppv->onceConnected = 1;
-        nConn++;
                                 /* Issue CA request */
                                 /* ---------------- */
-        /* install monitor once with first connect */
-        if ( ! ppv->value ) {
-                                    /* Allocate value structure */
-            ppv->value = calloc(1, dbr_size_n(ppv->dbrType, ppv->nElems));
-            if ( ppv->value ) {
-                ppv->status = ca_create_subscription(ppv->dbrType,
+            /* install monitor once with first connect */
+            ppv->status = ca_create_subscription(ppv->dbrType,
                                                 ppv->reqElems,
                                                 ppv->chid,
                                                 eventMask,
                                                 event_handler,
                                                 (void*)ppv,
                                                 NULL);
-                if ( ppv->status != ECA_NORMAL ) {
-                    free ( ppv->value );
-                }
-            }
         }
     }
     else if ( args.op == CA_OP_CONN_DOWN ) {
@@ -204,7 +197,7 @@ static void connection_handler ( struct connection_handler_args args )
 int main (int argc, char *argv[])
 {
     int returncode = 0;
-    int n = 0;
+    int n;
     int result;                 /* CA result */
     IntFormatT outType;         /* Output type */
 
@@ -212,9 +205,9 @@ int main (int argc, char *argv[])
     int digits = 0;             /* getopt() no. of float digits */
 
     int nPvs;                   /* Number of PVs */
-    pv* pvs = 0;                /* Array of PV structures */
+    pv* pvs;                    /* Array of PV structures */
 
-    setvbuf(stdout,NULL,_IOLBF,BUFSIZ);   /* Set stdout to line buffering */
+    LINE_BUFFER(stdout);        /* Configure stdout buffering */
 
     while ((opt = getopt(argc, argv, ":nhm:sSe:f:g:l:#:0:w:t:p:F:")) != -1) {
         switch (opt) {
@@ -357,7 +350,7 @@ int main (int argc, char *argv[])
     result = ca_context_create(ca_disable_preemptive_callback);
     if (result != ECA_NORMAL) {
         fprintf(stderr, "CA error %s occurred while trying "
-                "to start channel access '%s'.\n", ca_message(result), pvs[n].name);
+                "to start channel access.\n", ca_message(result));
         return 1;
     }
                                 /* Allocate PV structure array */

src/catools/caput.c

@@ -251,7 +251,6 @@ int caget (pv *pvs, int nPvs, OutputT format,
 
 int main (int argc, char *argv[])
 {
-    int n = 0;
     int i;
     int result;                 /* CA result */
     OutputT format = plain;     /* User specified format */
@@ -273,10 +272,10 @@ int main (int argc, char *argv[])
     struct dbr_gr_enum bufGrEnum;
 
     int nPvs;                   /* Number of PVs */
-    pv* pvs = 0;                /* Array of PV structures */
+    pv* pvs;                /* Array of PV structures */
 
-    setvbuf(stdout,NULL,_IOLBF,BUFSIZ);   /* Set stdout to line buffering */
-    putenv("POSIXLY_CORRECT=");      /* Behave correct on GNU getopt systems */
+    LINE_BUFFER(stdout);        /* Configure stdout buffering */
+    putenv("POSIXLY_CORRECT="); /* Behave correct on GNU getopt systems */
 
     while ((opt = getopt(argc, argv, ":cnlhatsS#:w:p:F:")) != -1) {
         switch (opt) {
@@ -372,7 +371,7 @@ int main (int argc, char *argv[])
     result = ca_context_create(ca_enable_preemptive_callback);
     if (result != ECA_NORMAL) {
         fprintf(stderr, "CA error %s occurred while trying "
-                "to start channel access '%s'.\n", ca_message(result), pvs[n].name);
+                "to start channel access.\n", ca_message(result));
         return 1;
     }
                                 /* Allocate PV structure array */

src/catools/tool_lib.h

@@ -5,8 +5,7 @@
 *     Operator of Los Alamos National Laboratory.
 * Copyright (c) 2002 Berliner Elektronenspeicherringgesellschaft fuer
 *     Synchrotronstrahlung.
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 
@@ -50,6 +49,13 @@
 #define DEFAULT_CA_PRIORITY 0  /* Default CA priority */
 #define DEFAULT_TIMEOUT 1.0     /* Default CA timeout */
 
+#ifndef _WIN32
+#  define LINE_BUFFER(stream) setvbuf(stream, NULL, _IOLBF, BUFSIZ)
+#else
+/* Windows doesn't support line mode, turn buffering off completely */
+#  define LINE_BUFFER(stream) setvbuf(stream, NULL, _IONBF, 0)
+#endif
+
 
 /* Type of timestamp */
 typedef enum { absolute, relative, incremental, incrementalByChan } TimeT;

src/db/dbCAC.h

@@ -196,8 +196,8 @@ private:
     dbContextReadNotifyCache readNotifyCache;
     dbEventCtx ctx;
     unsigned long stateNotifyCacheSize;
-    mutable epicsMutex & mutex;
-    mutable epicsMutex & cbMutex;
+    epicsMutex & mutex;
+    epicsMutex & cbMutex;
     cacContextNotify & notify;
     epics_auto_ptr < cacContext > pNetContext;
     char * pStateNotifyCache;

src/db/dbEvent.c

@@ -203,35 +203,44 @@ int epicsShareAPI dbel ( const char *pname, unsigned level )
             }
 
             if ( level > 1 ) {
-                unsigned nEntriesFree = ringSpace ( pevent->ev_que );
+                unsigned nEntriesFree;
+                const void * taskId;
+                LOCKEVQUE(pevent->ev_que);
+                nEntriesFree = ringSpace ( pevent->ev_que );
+                taskId = ( void * ) pevent->ev_que->evUser->taskid;
+                UNLOCKEVQUE(pevent->ev_que);
                 if ( nEntriesFree == 0u ) {
                     printf ( ", thread=%p, queue full", 
-                        (void *) pevent->ev_que->evUser->taskid );
+                        (void *) taskId );
                 }
                 else if ( nEntriesFree == EVENTQUESIZE ) {
                     printf ( ", thread=%p, queue empty", 
-                        (void *) pevent->ev_que->evUser->taskid );
+                        (void *) taskId );
                 }
                 else {
                     printf ( ", thread=%p, unused entries=%u", 
-                        (void *) pevent->ev_que->evUser->taskid, nEntriesFree );
+                        (void *) taskId, nEntriesFree );
                 }
             }
 
             if ( level > 2 ) {
+                unsigned nDuplicates;
+                unsigned nCanceled;
                 if ( pevent->nreplace ) {
                     printf (", discarded by replacement=%ld", pevent->nreplace);
                 }
                 if ( ! pevent->valque ) {
                     printf (", queueing disabled" );
                 }
-                if  ( pevent->ev_que->nDuplicates ) {
-                    printf (", duplicate count =%u\n", 
-                        pevent->ev_que->nDuplicates );
+                LOCKEVQUE(pevent->ev_que);
+                nDuplicates = pevent->ev_que->nDuplicates;
+                nCanceled = pevent->ev_que->nCanceled;
+                UNLOCKEVQUE(pevent->ev_que);
+                if  ( nDuplicates ) {
+                    printf (", duplicate count =%u\n", nDuplicates );
                 }
-                if ( pevent->ev_que->nCanceled ) {
-                    printf (", canceled count =%u\n", 
-                        pevent->ev_que->nCanceled );
+                if ( nCanceled ) {
+                    printf (", canceled count =%u\n", nCanceled );
                 }
             }
 
@@ -264,7 +273,7 @@ int epicsShareAPI dbel ( const char *pname, unsigned level )
  */
 dbEventCtx epicsShareAPI db_init_events (void)
 {
-    struct event_user   *evUser;
+    struct event_user * evUser;
     
     if (!dbevEventUserFreeList) {
         freeListInitPvt(&dbevEventUserFreeList, 
@@ -326,7 +335,7 @@ dbEventCtx epicsShareAPI db_init_events (void)
  */
 void epicsShareAPI db_close_events (dbEventCtx ctx)
 {
-    struct event_user *evUser = (struct event_user *) ctx;
+    struct event_user * const evUser = (struct event_user *) ctx;
 
     /*
      * Exit not forced on event blocks for now - this is left to channel
@@ -336,13 +345,32 @@ void epicsShareAPI db_close_events (dbEventCtx ctx)
      * NOTE: not deleting events before calling this routine could be
      * hazardous to the system's health.
      */
-
+    epicsMutexMustLock ( evUser->lock );
     evUser->pendexit = TRUE;
-
+    epicsMutexUnlock ( evUser->lock );
     /* notify the waiting task */
     epicsEventSignal(evUser->ppendsem);
 }
 
+/*
+ * create_ev_que()
+ */
+static struct event_que * create_ev_que ( struct event_user * const evUser )
+{
+    struct event_que * const ev_que = (struct event_que *) 
+        freeListCalloc ( dbevEventQueueFreeList );
+    if ( ! ev_que ) {
+        return NULL;
+    }
+    ev_que->writelock = epicsMutexCreate();
+    if ( ! ev_que->writelock ) {
+        freeListFree ( dbevEventQueueFreeList, ev_que );
+        return NULL;
+    }
+    ev_que->evUser = evUser;
+    return ev_que;
+}
+
 /*
  * DB_ADD_EVENT()
  */
@@ -350,13 +378,9 @@ dbEventSubscription epicsShareAPI db_add_event (
     dbEventCtx ctx, struct dbAddr *paddr,
     EVENTFUNC *user_sub, void *user_arg, unsigned select)
 {
-    struct event_user   *evUser = (struct event_user *) ctx;
-    struct dbCommon     *precord;
-    struct event_que    *ev_que;
-    struct event_que    *tmp_que;
-    struct evSubscrip  *pevent;
-
-    precord = paddr->precord;
+    struct event_user * const evUser = (struct event_user *) ctx;
+    struct event_que * ev_que;
+    struct evSubscrip * pevent;
 
     /*
      * Don't add events which will not be triggered
@@ -365,38 +389,42 @@ dbEventSubscription epicsShareAPI db_add_event (
         return NULL;
     }
 
-    pevent = freeListCalloc (dbevEventBlockFreeList);
-    if (!pevent) {
+    pevent = freeListCalloc ( dbevEventBlockFreeList );
+    if ( ! pevent ) {
         return NULL;
     }
 
     /* find an event que block with enough quota */
     /* otherwise add a new one to the list */
-    ev_que = &evUser->firstque;
-    while (TRUE) {
-        if (ev_que->quota + ev_que->nCanceled < EVENTQUESIZE - EVENTENTRIES) {
+    epicsMutexMustLock ( evUser->lock );
+    ev_que = & evUser->firstque;
+    while ( TRUE ) {
+        int success = 0;
+        LOCKEVQUE ( ev_que );
+        success = ( ev_que->quota + ev_que->nCanceled < 
+                                EVENTQUESIZE - EVENTENTRIES );
+        if ( success ) {
+            ev_que->quota += EVENTENTRIES;
+        }
+        UNLOCKEVQUE ( ev_que );
+        if ( success ) {
             break;
         }
-        if (!ev_que->nextque) {
-            tmp_que = (struct event_que *) 
-                freeListCalloc(dbevEventQueueFreeList);
-            if (!tmp_que) {
-                freeListFree (dbevEventBlockFreeList, pevent);
-                return NULL;
+        if ( ! ev_que->nextque ) {
+            ev_que->nextque = create_ev_que ( evUser );
+            if ( ! ev_que->nextque ) {
+                ev_que = NULL;
+                break;
             }
-            tmp_que->evUser = evUser;
-            tmp_que->writelock = epicsMutexCreate();
-            if (!tmp_que->writelock) {
-                freeListFree (dbevEventBlockFreeList, pevent);
-                freeListFree (dbevEventQueueFreeList, tmp_que);
-                return NULL;
-            }
-            ev_que->nextque = tmp_que;
-            ev_que = tmp_que;
-            break;
         }
         ev_que = ev_que->nextque;
     }
+    epicsMutexUnlock ( evUser->lock );
+
+    if ( ! ev_que ) {
+        freeListFree ( dbevEventBlockFreeList, pevent );
+        return NULL;
+    }
 
     pevent->npend =     0ul;
     pevent->nreplace =  0ul;
@@ -409,10 +437,6 @@ dbEventSubscription epicsShareAPI db_add_event (
     pevent->enabled =   FALSE;
     pevent->ev_que =    ev_que;
 
-    LOCKEVQUE(ev_que);
-    ev_que->quota += EVENTENTRIES;
-    UNLOCKEVQUE(ev_que);
-
     /*
      * Simple types values queued up for reliable interprocess
      * communication (for other types they get whatever happens to be
@@ -434,10 +458,9 @@ dbEventSubscription epicsShareAPI db_add_event (
  */
 void epicsShareAPI db_event_enable (dbEventSubscription es)
 {
-    struct evSubscrip *pevent = (struct evSubscrip *) es;
-    struct dbCommon *precord;
-
-    precord = (struct dbCommon *) pevent->paddr->precord;
+    struct evSubscrip * const pevent = (struct evSubscrip *) es;
+    struct dbCommon * const precord = 
+                (struct dbCommon *) pevent->paddr->precord;
 
     LOCKREC(precord);
     if ( ! pevent->enabled ) {
@@ -452,10 +475,9 @@ void epicsShareAPI db_event_enable (dbEventSubscription es)
  */
 void epicsShareAPI db_event_disable (dbEventSubscription es)
 {
-    struct evSubscrip *pevent = (struct evSubscrip *) es;
-    struct dbCommon *precord;
-
-    precord = (struct dbCommon *) pevent->paddr->precord;
+    struct evSubscrip * const pevent = (struct evSubscrip *) es;
+    struct dbCommon * const precord = 
+                (struct dbCommon *) pevent->paddr->precord;
 
     LOCKREC(precord);
     if ( pevent->enabled ) {
@@ -472,7 +494,7 @@ void epicsShareAPI db_event_disable (dbEventSubscription es)
 static void event_remove ( struct event_que *ev_que, 
     unsigned short index, struct evSubscrip *placeHolder )
 {
-    struct evSubscrip *pEvent = ev_que->evque[index];
+    struct evSubscrip * const pEvent = ev_que->evque[index];
 
     ev_que->evque[index] = placeHolder;
     if ( pEvent->npend == 1u ) {
@@ -495,12 +517,9 @@ static void event_remove ( struct event_que *ev_que,
  */
 void epicsShareAPI db_cancel_event (dbEventSubscription es)
 {
-    struct evSubscrip * pevent = ( struct evSubscrip * ) es;
-    struct dbCommon * precord;
+    struct evSubscrip * const pevent = ( struct evSubscrip * ) es;
     unsigned short getix;
 
-    precord = ( struct dbCommon * ) pevent->paddr->precord;
-
     db_event_disable ( es );
 
     /*
@@ -564,12 +583,12 @@ void epicsShareAPI db_cancel_event (dbEventSubscription es)
  */
 void epicsShareAPI db_flush_extra_labor_event (dbEventCtx ctx)
 {
-    struct event_user *evUser = (struct event_user *) ctx;
+    struct event_user * const evUser = (struct event_user *) ctx;
 
 	epicsMutexMustLock ( evUser->lock );
     while ( evUser->extraLaborBusy ) {
         epicsMutexUnlock ( evUser->lock );
-        epicsThreadSleep(1.0);
+        epicsThreadSleep(0.1);
         epicsMutexMustLock ( evUser->lock );
     }
     epicsMutexUnlock ( evUser->lock );
@@ -585,7 +604,7 @@ void epicsShareAPI db_flush_extra_labor_event (dbEventCtx ctx)
 int epicsShareAPI db_add_extra_labor_event (
     dbEventCtx ctx, EXTRALABORFUNC *func, void *arg)
 {
-    struct event_user *evUser = (struct event_user *) ctx;
+    struct event_user * const evUser = (struct event_user *) ctx;
 
     epicsMutexMustLock ( evUser->lock );
     evUser->extralabor_sub = func;
@@ -600,7 +619,7 @@ int epicsShareAPI db_add_extra_labor_event (
  */
 int epicsShareAPI db_post_extra_labor (dbEventCtx ctx)
 {
-    struct event_user *evUser = (struct event_user *) ctx;
+    struct event_user * const evUser = (struct event_user *) ctx;
     int doit;
 
     epicsMutexMustLock ( evUser->lock );
@@ -627,12 +646,10 @@ int epicsShareAPI db_post_extra_labor (dbEventCtx ctx)
  */
 static void db_post_single_event_private (struct evSubscrip *event)
 {  
-    struct event_que    *ev_que;
-    db_field_log        *pLog;
-    int                 firstEventFlag;
-    unsigned            rngSpace;
-
-    ev_que = event->ev_que;
+    struct event_que * const ev_que = event->ev_que;
+    db_field_log * pLog;
+    int firstEventFlag;
+    unsigned rngSpace;
 
     /*
      * evUser ring buffer must be locked for the multiple
@@ -747,10 +764,10 @@ void            *pField,
 unsigned int    caEventMask
 )
 {  
-    struct dbCommon     *pdbc = (struct dbCommon *)pRecord;
-    struct evSubscrip   *event;
+    struct dbCommon * const pdbc = (struct dbCommon *)pRecord;
+    struct evSubscrip * event;
 
-    if (pdbc->mlis.count == 0) return DB_EVENT_OK;       /* no monitors set */
+    if (pdbc->mlis.count == 0) return DB_EVENT_OK; /* no monitors set */
 
     LOCKREC(pdbc);
   
@@ -762,8 +779,7 @@ unsigned int    caEventMask
          * changed or pval==NULL and waiting on alarms and alarms changed
          */
         if ( (event->paddr->pfield == (void *)pField || pField==NULL) &&
-            (caEventMask & event->select)) {
-
+            (caEventMask & event->select) ) {
             db_post_single_event_private (event);
         }
     }
@@ -778,8 +794,8 @@ unsigned int    caEventMask
  */
 void epicsShareAPI db_post_single_event (dbEventSubscription es)
 {  
-    struct evSubscrip *event = (struct evSubscrip *) es;
-    struct dbCommon *precord = event->paddr->precord;
+    struct evSubscrip * const event = (struct evSubscrip *) es;
+    struct dbCommon * const precord = event->paddr->precord;
 
     dbScanLock (precord);
     db_post_single_event_private (event);
@@ -898,8 +914,8 @@ static int event_read ( struct event_que *ev_que )
  */
 static void event_task (void *pParm)
 {
-    struct event_user   *evUser = (struct event_user *) pParm;
-    struct event_que    *ev_que;
+    struct event_user * const evUser = (struct event_user *) pParm;
+    struct event_que * ev_que;
 
     /* init hook */
     if (evUser->init_func) {
@@ -934,12 +950,14 @@ static void event_task (void *pParm)
             epicsMutexMustLock ( evUser->lock );
         }
         evUser->extraLaborBusy = FALSE;
-        epicsMutexUnlock ( evUser->lock );
 
         for ( ev_que = &evUser->firstque; ev_que; 
                 ev_que = ev_que->nextque ) {
+            epicsMutexUnlock ( evUser->lock );
             event_read (ev_que);
+            epicsMutexMustLock ( evUser->lock );
         }
+        epicsMutexUnlock ( evUser->lock );
 
     } while( ! evUser->pendexit );
 
@@ -975,7 +993,7 @@ int epicsShareAPI db_start_events (
     dbEventCtx ctx,const char *taskname, void (*init_func)(void *), 
     void *init_func_arg, unsigned osiPriority )
 {
-     struct event_user *evUser = (struct event_user *) ctx;
+     struct event_user * const evUser = (struct event_user *) ctx;
      
      epicsMutexMustLock ( evUser->lock );
 
@@ -995,7 +1013,8 @@ int epicsShareAPI db_start_events (
          taskname = EVENT_PEND_NAME;
      }
      evUser->taskid = epicsThreadCreate (
-         taskname, osiPriority, epicsThreadGetStackSize(epicsThreadStackMedium),
+         taskname, osiPriority, 
+         epicsThreadGetStackSize(epicsThreadStackMedium),
          event_task, (void *)evUser);
      if (!evUser->taskid) {
          epicsMutexUnlock ( evUser->lock );
@@ -1008,9 +1027,10 @@ int epicsShareAPI db_start_events (
 /*
  * db_event_change_priority()
  */
-void epicsShareAPI db_event_change_priority ( dbEventCtx ctx, unsigned epicsPriority )
+void epicsShareAPI db_event_change_priority ( dbEventCtx ctx, 
+                                        unsigned epicsPriority )
 {
-    struct event_user * evUser = ( struct event_user * ) ctx;
+    struct event_user * const evUser = ( struct event_user * ) ctx;
     epicsThreadSetPriority ( evUser->taskid, epicsPriority );
 }
 
@@ -1019,9 +1039,11 @@ void epicsShareAPI db_event_change_priority ( dbEventCtx ctx, unsigned epicsPrio
  */
 void epicsShareAPI db_event_flow_ctrl_mode_on (dbEventCtx ctx)
 {
-    struct event_user *evUser = (struct event_user *) ctx;
+    struct event_user * const evUser = (struct event_user *) ctx;
 
+    epicsMutexMustLock ( evUser->lock );
     evUser->flowCtrlMode = TRUE;
+    epicsMutexUnlock ( evUser->lock );
     /* 
      * notify the event handler task
      */
@@ -1036,9 +1058,11 @@ void epicsShareAPI db_event_flow_ctrl_mode_on (dbEventCtx ctx)
  */
 void epicsShareAPI db_event_flow_ctrl_mode_off (dbEventCtx ctx)
 {
-    struct event_user *evUser = (struct event_user *) ctx;
+    struct event_user * const evUser = (struct event_user *) ctx;
 
+    epicsMutexMustLock ( evUser->lock );
     evUser->flowCtrlMode = FALSE;
+    epicsMutexUnlock ( evUser->lock );
     /* 
      * notify the event handler task
      */

src/db/dbPutNotifyBlocker.cpp

@@ -74,7 +74,7 @@ void dbPutNotifyBlocker::cancel (
     epicsGuard < epicsMutex > & guard )
 {
     guard.assertIdenticalMutex ( this->mutex );
-    if ( this->pn.paddr ) {
+    if ( this->pNotify ) {
         epicsGuardRelease < epicsMutex > unguard ( guard );
         dbNotifyCancel ( &this->pn );
     }
@@ -100,26 +100,31 @@ void dbPutNotifyBlocker::expandValueBuf (
 
 extern "C" void putNotifyCompletion ( putNotify *ppn )
 {
-    dbPutNotifyBlocker * pBlocker = static_cast < dbPutNotifyBlocker * > ( ppn->usrPvt );
-    {
-        epicsGuard < epicsMutex > guard ( pBlocker->mutex );
-        if ( pBlocker->pNotify ) {
-            if ( pBlocker->pn.status != putNotifyOK) {
-                pBlocker->pNotify->exception ( 
-                    guard, ECA_PUTFAIL,  "put notify unsuccessful",
-                    static_cast <unsigned> (pBlocker->pn.dbrType), 
-                    static_cast <unsigned> (pBlocker->pn.nRequest) );
-            }
-            else {
-                pBlocker->pNotify->completion ( guard );
-            }
+    dbPutNotifyBlocker * const pBlocker = 
+            static_cast < dbPutNotifyBlocker * > ( ppn->usrPvt );
+    epicsGuard < epicsMutex > guard ( pBlocker->mutex );
+    cacWriteNotify * const pNtfy = pBlocker->pNotify;
+    if ( pNtfy ) {
+        pBlocker->pNotify = 0;
+        // Its necessary to signal the initiators now before we call
+        // the user callback. This is less efficent, and potentially
+        // causes more thread context switching, but its probably 
+        // unavoidable because its possible that the use callback 
+        // might destroy this object.
+        pBlocker->block.signal ();
+        if ( pBlocker->pn.status != putNotifyOK ) {
+            pNtfy->exception ( 
+                guard, ECA_PUTFAIL,  "put notify unsuccessful",
+                static_cast < unsigned > (pBlocker->pn.dbrType), 
+                static_cast < unsigned > (pBlocker->pn.nRequest) );
         }
         else {
-            errlogPrintf ( "put notify completion with nill pNotify?\n" );
+            pNtfy->completion ( guard );
         }
-        pBlocker->pNotify = 0;
     }
-    pBlocker->block.signal ();
+    else {
+        errlogPrintf ( "put notify completion with nill pNotify?\n" );
+    }
 }
 
 void dbPutNotifyBlocker::initiatePutNotify ( 

src/dbStatic/dbExpand.c

@@ -1,14 +1,13 @@
 /*************************************************************************\
-* Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+* Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 *     National Laboratory.
 * Copyright (c) 2002 The Regents of the University of California, as
 *     Operator of Los Alamos National Laboratory.
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 /* dbExpand.c */
-/*	Author: Marty Kraimer	Date: 30NOV95	*/
+/*      Author: Marty Kraimer   Date: 30NOV95   */
 
 #include <stdlib.h>
 #include <stddef.h>
@@ -25,24 +24,25 @@
 #include "osiFileName.h"
 
 DBBASE *pdbbase = NULL;
-
+
 void usage(void)
 {
-    fprintf(stderr, "Usage:\n\tdbExpand -Ipath -ooutfile "
-	    "-S macro=value file1.dbd file2.dbd ...\n");
+    fprintf(stderr, "Usage:\n\tdbExpand -b -Ipath -ooutfile "
+            "-S macro=value file1.dbd file2.dbd ...\n");
     fprintf(stderr,"Specifying any path will replace the default of '.'\n");
+    fprintf(stderr,"The -b option enables relaxed breakpoint table checking\n");
 }
 
 int main(int argc,char **argv)
 {
-    char	*path = NULL;
-    char	*sub = NULL;
-    int		pathLength = 0;
-    int		subLength = 0;
+    char        *path = NULL;
+    char        *sub = NULL;
+    int         pathLength = 0;
+    int         subLength = 0;
     char        *outFilename = NULL;
     FILE        *outFP = stdout;
-    long	status;
-    long	returnStatus = 0;
+    long        status;
+    long        returnStatus = 0;
     static char *pathSep = OSI_PATH_LIST_SEPARATOR;
     static char *subSep = ",";
 
@@ -53,8 +53,8 @@ int main(int argc,char **argv)
     while ((argc > 1) && (**argv == '-')) {
         char optLtr = (*argv)[1];
         char *optArg;
-        
-        if (strlen(*argv) > 2) {
+
+        if (strlen(*argv) > 2 || optLtr == 'b') {
             optArg = *argv+2;
             ++argv;
             --argc;
@@ -63,36 +63,40 @@ int main(int argc,char **argv)
             argv += 2;
             argc -= 2;
         }
-        
+
         switch (optLtr) {
         case 'o':
             outFilename = optArg;
             break;
-            
+
         case 'I':
             dbCatString(&path, &pathLength, optArg, pathSep);
             break;
-            
+
         case 'S':
             dbCatString(&sub, &subLength, optArg, subSep);
             break;
-            
+
+        case 'b':
+            dbBptNotMonotonic = 1;
+            break;
+
         default:
             fprintf(stderr, "dbExpand: Unknown option '-%c'\n", optLtr);
             usage();
             exit(1);
         }
     }
-    
+
     if (argc < 1) {
-	fprintf(stderr, "dbExpand: No input file specified\n");
+        fprintf(stderr, "dbExpand: No input file specified\n");
         usage();
-	exit(1);
+        exit(1);
     }
-    
+
     for (; argc>0; --argc, ++argv) {
-	status = dbReadDatabase(&pdbbase,*argv,path,sub);
-	if (status) returnStatus = status;
+        status = dbReadDatabase(&pdbbase,*argv,path,sub);
+        if (status) returnStatus = status;
     }
     if (returnStatus) {
         errlogFlush();
@@ -106,7 +110,7 @@ int main(int argc,char **argv)
             exit(1);
         }
     }
-    
+
     dbWriteMenuFP(pdbbase,outFP,0);
     dbWriteRecordTypeFP(pdbbase,outFP,0);
     dbWriteDeviceFP(pdbbase,outFP);
@@ -116,7 +120,7 @@ int main(int argc,char **argv)
     dbWriteVariableFP(pdbbase,outFP);
     dbWriteBreaktableFP(pdbbase,outFP);
     dbWriteRecordFP(pdbbase,outFP,0,0);
-    
+
     free((void *)path);
     free((void *)sub);
     return 0;

src/dbStatic/dbStaticLib.h

@@ -74,6 +74,8 @@ epicsShareFunc DBENTRY * epicsShareAPI dbCopyEntry(DBENTRY *pdbentry);
 epicsShareFunc void epicsShareAPI dbCopyEntryContents(DBENTRY *pfrom,
     DBENTRY *pto);
 
+epicsShareExtern int dbBptNotMonotonic;
+
 epicsShareFunc long epicsShareAPI dbReadDatabase(DBBASE **ppdbbase,
     const char *filename, const char *path, const char *substitutions);
 epicsShareFunc long epicsShareAPI dbReadDatabaseFP(DBBASE **ppdbbase,

src/dev/softDev/devSASoft.c

@@ -72,15 +72,24 @@ static long read_sa(subArrayRecord *prec)
 
     if (nRequest > prec->malm)
         nRequest = prec->malm;
-    dbGetLink(&prec->inp, prec->ftvl, prec->bptr, 0, &nRequest);
-    prec->nord = ecount = nRequest - prec->indx;
+
+    if (prec->inp.type == CONSTANT)
+        nRequest = prec->nord;
+    else
+        dbGetLink(&prec->inp, prec->ftvl, prec->bptr, 0, &nRequest);
+
+    ecount = nRequest - prec->indx;
     if (ecount > 0) {
         int esize = dbValueSize(prec->ftvl);
+
         if (ecount > prec->nelm)
             ecount = prec->nelm;
         memmove(prec->bptr, (char *)prec->bptr + prec->indx * esize,
                 ecount * esize);
-    }
+    } else
+        ecount = 0;
+
+    prec->nord = ecount;
 
     if (nRequest > 0 &&
         prec->tsel.type == CONSTANT &&

src/excas/Makefile

@@ -1,5 +1,5 @@
 #*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
@@ -19,7 +19,7 @@ SRC_DIRS += $(TOP)/src/makeBaseApp/top/caServerApp
 #
 # Added ws2_32 winmm user32 for the non-dll build
 #
-SYS_PROD_LIBS_WIN32 += ws2_32 advapi32 user32
+PROD_SYS_LIBS_WIN32 += ws2_32 advapi32 user32
 
 
 PROD_HOST = excas

src/libCom/Makefile

@@ -222,8 +222,6 @@ SRCS += epicsTempFile.cpp
 SRCS += epicsStdio.c
 SRCS += osdStdio.c
 
-osdEnv_CFLAGS_WIN32= -U__STDC__
-
 SRCS += osdThread.c
 SRCS += osdMutex.c
 SRCS += osdEvent.c

src/libCom/cxxTemplates/epicsSingleton.h

@@ -34,7 +34,7 @@ public:
     void * pInstance () const;
 private:
     void * _pInstance;
-    size_t _refCount;
+    std :: size_t _refCount;
     SingletonUntyped ( const SingletonUntyped & );
     SingletonUntyped & operator = ( const SingletonUntyped & );
 };

src/libCom/error/errlog.c

@@ -41,7 +41,6 @@
 /*Declare storage for errVerbose */
 epicsShareDef int errVerbose = 0;
 
-static void errlogCleanup(void);
 static void exitHandler(void *);
 static void errlogThread(void);
 
@@ -119,10 +118,11 @@ epicsShareFunc int errlogPrintf(const char *pFormat, ...)
     errlogInit(0);
     if (pvtData.atExit || (isOkToBlock && pvtData.toConsole)) {
         va_start(pvar, pFormat);
-        vfprintf(stderr, pFormat, pvar);
+        nchar = vfprintf(stderr, pFormat, pvar);
         va_end (pvar);
         fflush(stderr);
     }
+    if (pvtData.atExit) return nchar;
     pbuffer = msgbufGetFree(isOkToBlock);
     if (!pbuffer) return 0;
     va_start(pvar, pFormat);
@@ -390,8 +390,15 @@ static void exitHandler(void *pvt)
     pvtData.atExit = 1;
     epicsEventSignal(pvtData.waitForWork);
     epicsEventMustWait(pvtData.waitForExit);
+
+    free(pvtData.pbuffer);
+    epicsMutexDestroy(pvtData.flushLock);
+    epicsEventDestroy(pvtData.flush);
+    epicsEventDestroy(pvtData.waitForFlush);
+    epicsMutexDestroy(pvtData.listenerLock);
+    epicsMutexDestroy(pvtData.msgQueueLock);
+    epicsEventDestroy(pvtData.waitForWork);
     epicsEventDestroy(pvtData.waitForExit);
-    return;
 }
 
 struct initArgs {
@@ -431,18 +438,6 @@ static void errlogInitPvt(void *arg)
         pvtData.errlogInitFailed = FALSE;
     }
 }
-
-static void errlogCleanup(void)
-{
-    free(pvtData.pbuffer);
-    epicsMutexDestroy(pvtData.flushLock);
-    epicsEventDestroy(pvtData.flush);
-    epicsEventDestroy(pvtData.waitForFlush);
-    epicsMutexDestroy(pvtData.listenerLock);
-    epicsMutexDestroy(pvtData.msgQueueLock);
-    epicsEventDestroy(pvtData.waitForWork);
-    /*Note that exitHandler must destroy waitForExit*/
-}
 
 epicsShareFunc int epicsShareAPI errlogInit2(int bufsize, int maxMsgSize)
 {
@@ -494,9 +489,7 @@ static void errlogThread(void)
     epicsAtExit(exitHandler,0);
     while (TRUE) {
         epicsEventMustWait(pvtData.waitForWork);
-        if (pvtData.atExit) break;
         while ((pmessage = msgbufGetSend(&noConsoleMessage))) {
-            if (pvtData.atExit) break;
             epicsMutexMustLock(pvtData.listenerLock);
             if (pvtData.toConsole && !noConsoleMessage) {
                 fprintf(stderr,"%s",pmessage);
@@ -515,7 +508,6 @@ static void errlogThread(void)
         epicsThreadSleep(.2); /*just wait an extra .2 seconds*/
         epicsEventSignal(pvtData.waitForFlush);
     }
-    errlogCleanup();
     epicsEventSignal(pvtData.waitForExit);
 }
 
@@ -533,8 +525,10 @@ static msgNode *msgbufGetNode(void)
         char *plimit = pbuffer + pvtData.buffersize;
 
         pnextFree = plast->message + adjustToWorstCaseAlignment(plast->length);
-        if (pfirst <= plast &&
-            pnextFree + pvtData.msgNeeded > plimit) {
+        if (pfirst > plast) {
+            plimit = (char *)pfirst;
+        }
+        else if (pnextFree + pvtData.msgNeeded > plimit) {
             pnextFree = pbuffer;    /* Hit end, wrap to start */
             plimit = (char *)pfirst;
         }
@@ -552,7 +546,9 @@ static char *msgbufGetFree(int noConsoleMessage)
 {
     msgNode *pnextSend;
 
-    epicsMutexMustLock(pvtData.msgQueueLock);
+    if (epicsMutexLock(pvtData.msgQueueLock) != epicsMutexLockOK)
+        return 0;
+
     if ((ellCount(&pvtData.msgQueue) == 0) && pvtData.missedMessages) {
         int nchar;
 

src/libCom/iocsh/iocsh.cpp

@@ -798,6 +798,8 @@ iocshBody (const char *pathname, const char *commandLine)
 int epicsShareAPI
 iocsh (const char *pathname)
 {
+    if (pathname)
+        epicsEnvSet("IOCSH_STARTUP_SCRIPT", pathname);
     return iocshBody(pathname, NULL);
 }
 

src/libCom/misc/compilerDependencies.h

@@ -95,7 +95,7 @@
 /*
  * Deprecation marker
  */
-#ifdef __GNUC__
+#if defined( __GNUC__ ) && (__GNUC__ > 2)
 # define EPICS_DEPRECATED __attribute__((deprecated))
 #else
 # define EPICS_DEPRECATED

src/libCom/osi/epicsThread.cpp

@@ -169,6 +169,8 @@ bool epicsThread::exitWait ( const double delay ) throw ()
             "epicsThread::exitWait()\n" );
         epicsThreadSleep ( epicsMin ( delay, 5.0 ) );
     }
+    // the event mechanism is used for other purposes
+    this->event.signal ();
     return this->terminated;
 }
 

src/libCom/osi/epicsTime.cpp

@@ -74,8 +74,6 @@ public:
     bool useDiffTimeOptimization;
 };
 
-static const epicsTimeLoadTimeInit lti;
-
 //
 // epicsTimeLoadTimeInit ()
 //
@@ -125,6 +123,9 @@ inline void epicsTime::addNanoSec (long nSecAdj)
 //
 epicsTime::epicsTime ( const time_t_wrapper & ansiTimeTicks )
 {
+    // avoid c++ static initialization order issues
+    static epicsTimeLoadTimeInit & lti = * new epicsTimeLoadTimeInit ();
+
     //
     // try to directly map time_t into an unsigned long integer because this is 
     // faster on systems w/o hardware floating point and a simple integer type time_t.
@@ -212,6 +213,8 @@ epicsTime epicsTime::getEvent (const epicsTimeEvent &event)
 //
 epicsTime::operator time_t_wrapper () const
 {
+    // avoid c++ static initialization order issues
+    static epicsTimeLoadTimeInit & lti = * new epicsTimeLoadTimeInit ();
     time_t_wrapper wrap;
 
     if ( lti.useDiffTimeOptimization ) {

src/libCom/osi/os/Darwin/osdSock.h

@@ -1,7 +1,6 @@
 /*************************************************************************\
 * Copyright (c) 2002 The University of Saskatchewan
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 /*
@@ -13,10 +12,6 @@
 #ifndef osdSockH
 #define osdSockH
 
-#ifdef __cplusplus
-extern "C" {
-#endif
-
 #include <errno.h>
 
 #include <sys/types.h>
@@ -24,8 +19,6 @@ extern "C" {
 #include <sys/time.h>
 #include <sys/socket.h>
 #include <sys/ioctl.h>
-/*#include <sys/filio.h>
-#include <sys/sockio.h>*/
 #include <netinet/in.h>
 #include <netinet/tcp.h>
 #include <arpa/inet.h>
@@ -34,10 +27,6 @@ extern "C" {
 #include <unistd.h> /* close() and others */
 
 
-#ifdef __cplusplus
-}
-#endif
- 
 typedef int                     SOCKET;
 #define INVALID_SOCKET          (-1)
 #define SOCKERRNO               errno

src/libCom/osi/os/Linux/osdSock.h

@@ -3,8 +3,7 @@
 *     National Laboratory.
 * Copyright (c) 2002 The Regents of the University of California, as
 *     Operator of Los Alamos National Laboratory.
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 
@@ -26,10 +25,6 @@
 #ifndef osdSockH
 #define osdSockH
 
-#ifdef __cplusplus
-extern "C" {
-#endif
-
 #include <errno.h>
 
 #include <sys/types.h>
@@ -37,8 +32,6 @@ extern "C" {
 #include <sys/time.h>
 #include <sys/socket.h>
 #include <sys/ioctl.h>
-/*#include <sys/filio.h>
-#include <sys/sockio.h>*/
 #include <netinet/in.h>
 #include <netinet/tcp.h>
 #include <arpa/inet.h>
@@ -47,10 +40,6 @@ extern "C" {
 #include <unistd.h> /* close() and others */
 
 
-#ifdef __cplusplus
-}
-#endif
- 
 typedef int                     SOCKET;
 #define INVALID_SOCKET          (-1)
 #define SOCKERRNO               errno

src/libCom/osi/os/RTEMS/osdSock.h

@@ -1,7 +1,6 @@
 /*************************************************************************\
 * Copyright (c) 2002 The University of Saskatchewan
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 /*
@@ -14,10 +13,6 @@
 #ifndef osdSockH
 #define osdSockH
 
-#ifdef __cplusplus
-extern "C" {
-#endif
-
 #include <errno.h>
 
 #include <sys/types.h>
@@ -32,6 +27,10 @@ extern "C" {
 #include <netdb.h>
 #include <unistd.h>
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 int select(int  n,  fd_set  *readfds,  fd_set  *writefds, fd_set *exceptfds, struct timeval *timeout);
 
 #ifdef __cplusplus

src/libCom/osi/os/RTEMS/osdTime.cpp

@@ -18,6 +18,7 @@
 #include <sys/types.h>
 #include <sys/socket.h>
 #include <netinet/in.h>
+#include <rtems/rtems_bsdnet_internal.h>
 #include "epicsTime.h"
 #include "osdTime.h"
 #include "osiNTPTime.h"
@@ -117,17 +118,21 @@ double rtemsTicksPerSecond_double, rtemsTicksPerTwoSeconds_double;
  * explicitly calls osdTimeRegister() at the appropriate time.
  * However if we are loaded dynamically we *do* register our
  * standard time providers at static constructor time; in this
- * case the tick rate will have been set already.
+ * case the network is available already.
  */
 static int staticTimeRegister(void)
 {
-    if (rtemsTicksPerSecond != 0)
-        osdTimeRegister();
-
     rtems_clock_get (RTEMS_CLOCK_GET_TICKS_PER_SECOND, &rtemsTicksPerSecond);
     rtemsTicksPerSecond_double = rtemsTicksPerSecond;
     rtemsTicksPerTwoSeconds_double = rtemsTicksPerSecond_double * 2.0;
 
+    /* If networking is already up at the time static constructors
+     * are executed then we are probably run-time loaded and it's
+     * OK to osdTimeRegister() at this point.
+     */
+    if (rtems_bsdnet_ticks_per_second != 0)
+        osdTimeRegister();
+
     return 1;
 }
 static int done = staticTimeRegister();

src/libCom/osi/os/WIN32/osdSock.h

@@ -3,15 +3,12 @@
 *     National Laboratory.
 * Copyright (c) 2002 The Regents of the University of California, as
 *     Operator of Los Alamos National Laboratory.
-* EPICS BASE Versions 3.13.7
-* and higher are distributed subject to a Software License Agreement found
+* EPICS BASE is distributed subject to a Software License Agreement found
 * in file LICENSE that is included with this distribution. 
 \*************************************************************************/
 
-
-#ifdef __cplusplus
-extern "C" {
-#endif
+#ifndef osdSockH
+#define osdSockH
 
 #include <time.h>
 #include <errno.h>
@@ -25,9 +22,6 @@ extern "C" {
 #endif
 #include <winsock2.h>
 
-#ifdef __cplusplus
-}
-#endif
 
 #define SOCKERRNO WSAGetLastError()
 
@@ -79,3 +73,4 @@ typedef int osiSocklen_t;
 
 epicsShareFunc unsigned epicsShareAPI wsaMajorVersion ();
 
+#endif /*osdSockH*/

src/libCom/osi/os/WIN32/osdThread.c

@@ -124,7 +124,7 @@ BOOL WINAPI DllMain (
 #if _WIN32_WINNT >= 0x0501 
         /* 
          * Only in WXP 
-         * Thats a shame becaus ethis is probably much faster
+         * Thats a shame because this is probably much faster
          */
         success = GetModuleHandleEx (
             GET_MODULE_HANDLE_EX_FLAG_FROM_ADDRESS,
@@ -268,13 +268,10 @@ static void threadCleanupWIN32 ( void )
         return;
     }
 
-    while ( ( pParm = ( win32ThreadParam * ) ellFirst ( & pGbl->threadList ) ) ) {
+    while ( ( pParm = ( win32ThreadParam * ) 
+        ellFirst ( & pGbl->threadList ) ) ) {
         epicsParmCleanupWIN32 ( pParm );
     }
-
-    TlsFree ( pGbl->tlsIndexThreadLibraryEPICS );
-
-    DeleteCriticalSection ( & pGbl->mutex );
 }
 
 /*
@@ -446,7 +443,8 @@ epicsShareFunc epicsThreadBooleanStatus epicsShareAPI epicsThreadHighestPriority
 /*
  * epicsThreadGetStackSize ()
  */
-epicsShareFunc unsigned int epicsShareAPI epicsThreadGetStackSize ( epicsThreadStackSizeClass stackSizeClass ) 
+epicsShareFunc unsigned int epicsShareAPI 
+    epicsThreadGetStackSize ( epicsThreadStackSizeClass stackSizeClass ) 
 {
     static const unsigned stackSizeTable[epicsThreadStackBig+1] = {4000, 6000, 11000};
 
@@ -628,18 +626,21 @@ epicsShareFunc epicsThreadId epicsShareAPI epicsThreadCreate (const char *pName,
         free ( pParmWIN32 );
         return NULL;
     }
+    
+    EnterCriticalSection ( & pGbl->mutex );
+    ellAdd ( & pGbl->threadList, & pParmWIN32->node );
+    LeaveCriticalSection ( & pGbl->mutex );
 
     wstat =  ResumeThread ( pParmWIN32->handle );
     if (wstat==0xFFFFFFFF) {
+		    EnterCriticalSection ( & pGbl->mutex );
+		    ellDelete ( & pGbl->threadList, & pParmWIN32->node );
+		    LeaveCriticalSection ( & pGbl->mutex );
         CloseHandle ( pParmWIN32->handle ); 
         free ( pParmWIN32 );
         return NULL;
     }
 
-    EnterCriticalSection ( & pGbl->mutex );
-    ellAdd ( & pGbl->threadList, & pParmWIN32->node );
-    LeaveCriticalSection ( & pGbl->mutex );
-
     return ( epicsThreadId ) pParmWIN32;
 }
 
@@ -955,10 +956,17 @@ static void epicsThreadShowPrivate ( epicsThreadId id, unsigned level )
             (void *) pParm, idForFormat, pParm->epicsPriority,
             epics_GetThreadPriorityAsString ( pParm->handle ),
             epicsThreadIsSuspended ( id ) ? "suspend" : "ok" );
+        if ( level ) {
+            fprintf (epicsGetStdout(), " %-8p %-8p ",
+                (void *) pParm->handle, (void *) pParm->parm );
+        }
     }
     else {
         fprintf (epicsGetStdout(), 
             "NAME            EPICS-ID WIN32-ID EPICS-PRI WIN32-PRI STATE  " );
+        if ( level ) {
+            fprintf (epicsGetStdout(), " HANDLE   FUNCTION PARAMETER" );
+        }
     }
     fprintf (epicsGetStdout(),"\n" );
 }