avoid crash in vxWorks 6 when SNL name is long

- option to find() so it follow links
- use of strict
- handle comments correctly when parsing RELEASE

.gitignore

@@ -0,0 +1,7 @@
+O.*
+bin
+dbd
+include
+lib
+man
+templates

LICENSE

@@ -0,0 +1,84 @@
+Copyright (c) 1991-2004 University of Chicago and The Regents of the
+University of California. All rights reserved.
+
+EPICS BASE is distributed subject to the following license conditions:
+
+ SOFTWARE LICENSE AGREEMENT
+ Software: EPICS BASE
+ Versions: 3.13.7 and higher
+
+ 1. The "Software", below, refers to EPICS BASE (in either source code, or
+    binary form and accompanying documentation). Each licensee is
+    addressed as "you" or "Licensee."
+
+ 2. The copyright holders shown above and their third-party licensors
+    hereby grant Licensee a royalty-free nonexclusive license, subject to
+    the limitations stated herein and U.S. Government license rights.
+
+ 3. You may modify and make a copy or copies of the Software for use
+    within your organization, if you meet the following conditions:
+      a. Copies in source code must include the copyright notice and this
+         Software License Agreement.
+      b. Copies in binary form must include the copyright notice and this
+         Software License Agreement in the documentation and/or other
+         materials provided with the copy.
+
+ 4. You may modify a copy or copies of the Software or any portion of it,
+    thus forming a work based on the Software, and distribute copies of
+    such work outside your organization, if you meet all of the following
+    conditions:
+      a. Copies in source code must include the copyright notice and this
+         Software License Agreement;
+      b. Copies in binary form must include the copyright notice and this
+         Software License Agreement in the documentation and/or other
+         materials provided with the copy;
+      c. Modified copies and works based on the Software must carry
+         prominent notices stating that you changed specified portions of
+         the Software.
+
+ 5. Portions of the Software resulted from work developed under a U.S.
+    Government contract and are subject to the following license: the
+    Government is granted for itself and others acting on its behalf a
+    paid-up, nonexclusive, irrevocable worldwide license in this computer
+    software to reproduce, prepare derivative works, and perform publicly
+    and display publicly.
+
+ 6. WARRANTY DISCLAIMER. THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT WARRANTY
+    OF ANY KIND. THE COPYRIGHT HOLDERS, THEIR THIRD PARTY LICENSORS, THE
+    UNITED STATES, THE UNITED STATES DEPARTMENT OF ENERGY, AND THEIR
+    EMPLOYEES: (1) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+    BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+    FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT, (2) DO NOT ASSUME
+    ANY LEGAL LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS,
+    OR USEFULNESS OF THE SOFTWARE, (3) DO NOT REPRESENT THAT USE OF THE
+    SOFTWARE WOULD NOT INFRINGE PRIVATELY OWNED RIGHTS, (4) DO NOT WARRANT
+    THAT THE SOFTWARE WILL FUNCTION UNINTERRUPTED, THAT IT IS ERROR-FREE
+    OR THAT ANY ERRORS WILL BE CORRECTED.
+
+ 7. LIMITATION OF LIABILITY. IN NO EVENT WILL THE COPYRIGHT HOLDERS, THEIR
+    THIRD PARTY LICENSORS, THE UNITED STATES, THE UNITED STATES DEPARTMENT
+    OF ENERGY, OR THEIR EMPLOYEES: BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
+    CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR NATURE,
+    INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR LOSS OF DATA, FOR ANY
+    REASON WHATSOEVER, WHETHER SUCH LIABILITY IS ASSERTED ON THE BASIS OF
+    CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), OR
+    OTHERWISE, EVEN IF ANY OF SAID PARTIES HAS BEEN WARNED OF THE
+    POSSIBILITY OF SUCH LOSS OR DAMAGES.
+
+________________________________________________________________________
+
+This software is in part copyrighted by the BERLINER SPEICHERRING
+GESELLSCHAFT FUER SYNCHROTRONSTRAHLUNG M.B.H. (BESSY), BERLIN, GERMANY.
+
+In no event shall BESSY be liable to any party for direct, indirect,
+special, incidental, or consequential damages arising out of the use of
+this software, its documentation, or any derivatives thereof, even if
+BESSY has been advised of the possibility of such damage.
+
+BESSY specifically disclaims any warranties, including, but not limited
+to, the implied warranties of merchantability, fitness for a particular
+purpose, and non-infringement.  This software is provided on an "as is"
+basis, and BESSY has no obligation to provide maintenance, support,
+updates, enhancements, or modifications.
+________________________________________________________________________
+

MakeRelease

@@ -9,78 +9,6 @@
 #
 #    [-b] - For fully built release
 #
-# $Log$
-# Revision 1.12  1997/07/23 14:46:55  jba
-# Added *bat files.
-#
-# Revision 1.11  1997/07/01 18:29:17  jba
-# Changed  Tar to tar in output filename.
-#
-# Revision 1.10  1997/01/17 19:59:37  jba
-# Use config/CONFIG_BASE_VERSION to get version info.
-#
-# Revision 1.9  1996/09/04 21:41:36  jba
-# Top level dir no longer passed to MakeRelease
-#
-# Revision 1.8  1996/07/02 13:45:09  jba
-# Added dbd and base/config dirs. Removed epics/config and base/rec.
-#
-# Revision 1.7  1996/06/25 21:54:42  jba
-# Command line parm now base dir
-#
-# Revision 1.6  1996/06/07 19:19:10  jba
-# MakeRelease is now in release tar file.
-#
-# Revision 1.5  1996/03/04 21:03:48  jba
-# epicsVersion.h now in src/include.
-#
-# Revision 1.4  1996/02/20 21:03:53  jba
-# Updated README files to reflect directory changes and new installEpics.
-#
-# Revision 1.3  1995/10/03  15:42:26  jba
-# Added *COPYRIGHT* files to release tar file.
-#
-# Revision 1.2  1995/08/28  15:49:54  jba
-# Added startup directory to release tar file
-#
-# Revision 1.1  1995/08/17  20:14:56  jba
-# Added base/tools scripts functionality to base/Makefile, removed scripts
-# Moved base/tools/MakeRelease to base dir.
-#
-# Revision 1.14  1994/12/19  18:42:08  tang
-# Make the args length compatible for HP and SUN.
-#
-# Revision 1.13  1994/12/15  19:19:18  tang
-# Replace -I opt by cat and xargs for tar for HP compatibility.
-#
-# Revision 1.12  1994/12/14  23:57:55  tang
-# Take out \< and \> pair for hp compatible
-#
-# Revision 1.11  1994/10/31  21:44:17  jba
-# Moved print stmnt, added cd $(EPICS)
-#
-# Revision 1.10  1994/10/05  18:29:34  jba
-# Renamed version.h to epicsVersion.h
-#
-# Revision 1.9  1994/09/22  01:41:47  mcn
-# MakeRelease - MAJOR bug fix.  GetVar / MakeDirs - minor fix.
-#
-# Revision 1.8  1994/09/07  20:59:15  mcn
-# Revamped GetVar, modified scripts for new GetVar.
-#
-# Revision 1.7  1994/09/02  20:58:00  mcn
-# minor change.
-#
-# Revision 1.6  1994/08/21  00:56:41  mcn
-# New Stuff
-#
-# Revision 1.5  1994/08/02  18:36:29  mcn
-# Support new configuration.
-#
-# Revision 1.4  1994/07/14  22:13:32  mcn
-# Now include SDR Makefile/Headers
-#
-#
 
 
 if [ ! -d src ]; then

Makefile

@@ -1,19 +1,54 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+#
+# Top Level EPICS Makefile
+#        by Matthew Needes and Mike Bordua
+#
+#  Notes:
+#    The build, clean, install, and depends "commands" do not have
+#         their own dependency lists; they are instead handled by
+#         the build.%, clean.%, etc. dependencies.
+#
+#    However, the release dependencies DOES require a complete
+#         install because the release.% syntax is illegal.
 #
 # $Id$
 #
 
-TOP = .
-include $(TOP)/configure/CONFIG
+TOP=.
+include $(TOP)/config/CONFIG_BASE
 
-DIRS += config configure src
+DIRS = src config
 
-include $(TOP)/configure/RULES_TOP
+INSTALL_BIN = $(INSTALL_LOCATION)/bin/$(HOST_ARCH)
 
-release::
+#
+# this bootstraps in makeMakefile.pl (and others) so that it can
+# be used to create the first O.xxxx/Makefile
+#
+PERL_BOOTSTRAP_SCRIPTS = $(notdir $(wildcard $(TOP)/src/tools/*.pl))
+PERL_BOOTSTRAP_SCRIPTS_INSTALL = $(PERL_BOOTSTRAP_SCRIPTS:%=$(INSTALL_BIN)/%)
+all host cross inc rebuild clean depends buildInstall :: $(PERL_BOOTSTRAP_SCRIPTS_INSTALL)
+
+RMDIR=$(PERL) $(TOP)/src/tools/rm.pl -rf
+
+include $(TOP)/config/RULES_TOP
+
+release: 
 	@echo TOP: Creating Release...
-	@$(TOOLS)/MakeRelease
+	@./MakeRelease
 
-built_release::
+built_release:
 	@echo TOP: Creating Fully Built Release...
-	@$(TOOLS)/MakeRelease -b $(INSTALL_LOCATION)
-	
+	@./MakeRelease -b $(INSTALL_LOCATION)
+
+$(INSTALL_BIN)/%.pl: $(TOP)/src/tools/%.pl
+	$(PERL) $(TOP)/src/tools/installEpics.pl -d -m 555 $< $(INSTALL_BIN)
+

README

@@ -1,414 +1,290 @@
-README 
-
-                  Installation Instructions
-
-                           EPICS base
-
-                      Release 3.14.0beta1
-
-What is EPICS base?
-
-     The Experimental Physics and Industrial Control Systems (EPICS) is
-     an extensible set of software components and tools with which
-     application developers can create a control system. This control system
-     can be used to control accelerators, detectors, telescopes, or other
-     scientific experimental equipment. EPICS base is the set of core
-     software, i.e. the components of EPICS without which EPICS would not
-     function. EPICS base allows an arbitrary number of target systems,
-     IOCs (input/output controllers), and host systems, OPIs (operator
-     interfaces) of various types.
-
-What is new in this release?
-
-     This version of EPICS base contains significant changes and offers
-     major improvements in functionality over previous versions. Please
-     check the RELEASE_NOTES file in the distribution for description of
-     changes and release migration details.
+$Id$
+
+----------------------------------------------------------------------------
+3.13 EPICS BASE Notes and Build Instructions.
+	- By Matthew Needes
+----------------------------------------------------------------------------
 
-Copyright
-
-     Please review the COPYRIGHT* files included in the distribution for
-     legal terms of usage.
-
-Supported platforms
-
-     Currently this version of EPICS base has been built on the following
-     hosts for the following targets. If you are trying to build EPICS base on a
-     different host or for a different target machine you must get the proper
-     host/target cross compiler and header files and you will have to create
-     and add the appropriate new configure files to the
-     base/configure/os/directory. You can start by copying existing
-     configuration files in the configure/os directory and then make changes
-     for your new platforms.
-
-     Host platforms (operating system - architecture - <alternate c++
-     compiler>) 
-
-         solaris-sparc 
-         solaris-sparc-gnu 
-         linux-x86 
-         win32-x86 
-         win32-x86-borland
-
-     Cross compile target platforms (operating system - architecture)
-
-         vxWorks-486 
-         vxWorks-68040 
-         vxWorks-68040lc 
-         vxWorks-68060 
-         vxWorks-ppc603 
-         vxWorks-ppc604 
-         vxWorks-pentium 
-         RTEMS-gen68360 
-         RTEMS-mvme167 
-         RTEMS-pc386
-
-Supported compilers
-
-     This version of EPICS base has been built and tested using the host
-     vendor's C and C++ compilers as well as the GNU gcc and g++
-     compilers. The GNU cross-compilers have been used for all
-     cross-compiled targets. You may need the host vendor's C++ compiler
-     in your search path to do EPICS builds. Check definitions of ACC and
-     CCC in base/configure/os/CONFIG.<host>.<host> or the definitions
-     for GCC and G++ if ANSI=GCC and CPLUSPLUS=GCC are specified
-     in CONFIG_SITE.
-
-Software requirements
-
-     GNU make 
-     You must use GNU make, gnumake, for any EPICS builds.  Set your
-     path so that a gnumake version 3.70 or later is available. 
-
-     Perl 
-     You must have perl version 5.0 or later installed. The configure files do
-     not specify the perl full pathname.  You need the perl executable in
-     your search path. 
-
-     Unzip and tar (Winzip on WIN32 systems) 
-     You must have tools available to unzip and untar the EPICS base
-     distribution file. 
-
-     Tornado 2.0 
-     You must have Tornado 2.0 installed if any of your target systems are
-     vxWorks systems.  Tornado 2.0 provides the cross-compiler and header
-     files needed to build for these target systems. The full path location to
-     Tornado 2.0 must be specified in the base/configure/RELEASE or
-     base/configure/RELEASE.<hostarch> file. You will also need one or
-     more board support packages. Consult the vxWorks documentation for
-     details. 
-
-     Optional GNU compiler requirement for solaris-sparc  and
-     win32-x86 hosts 
-     If you have state notation language source files (*.st files) which require
-     c preprocessing before conversion to c source,  gcc must be in your path.
-
-Host system storage requirements
-
-     The GNU zipped tar file is approximately 1.4 MB in size. The unzipped
-     untarred distribution source tree is approximately 6 MB. The build
-     created files for each host take approximately 40 MB and the build
-     created files for each target take approximately 10 MB.
-
-Documentation
-
-     EPICS documentation is available on the WWW via the EPICS home
-     page at APS:  URL http://www.aps.anl.gov/Epics
-
-     This README.htm is in the base distribution file and will be available
-     on the IOC software R3.14 EPICS WWW page which can be accessed
-     from the APS EPICS home page.
-
-WWW pages
-
-     EPICS home page at APS
-
-         http://www.aps.anl.gov/epics
-
-     Other WWW sites
-
-         Additional information on EPICS can be found at the
-         various other WWW links on the EPICS home page at APS.
-
-     Mailing Lists
-
-         There are five EPICS mailing lists provided by APS. See The
-         EPICS home page for subscription instructions.
-
-Directory Structure
-
-     Distribution directory structure:
-
-     base                         Root directory of the base istribution 
-     base/config                  R3.13 compatibility build configuration files 
-     base/config/tools            Perl and shell scripts used in the R3.13 build 
-     base/configure               Operating system independent build config files 
-     base/configure/os            Operating system dependent build config files 
-     base/configure/tools         Perl and shell scripts used in the build 
-     base/copyright               Text files describing software copyrights 
-     base/src                     All epics base source code in subdirectories 
-     base/src/as                  Access security 
-     base/src/bpt                 Break point table 
-     base/src/ca                  Channel access 
-     base/src/cas                 Channel access server 
-     base/src/db                  Database access 
-     base/src/db/test             Database access tests 
-     base/src/dbStatic            Static database access 
-     base/src/dbtools             Database dbLoadTemplate tools 
-     base/src/dev                 Device support (softDev and testDev) 
-     base/src/gdd                 General data descriptor 
-     base/src/iocsh               Ioc shell command interpreter 
-     base/src/libCom              General purpose library code in subdirectories 
-     base/src/libCom/bucketLib    Hash bucket 
-     base/src/libCom/calc         Algebraic expression interpreter 
-     base/src/libCom/cvtFast      Fast number to string conversion 
-     base/src/libCom/cxxTemplates C++ templates and templates tests 
-     base/src/libCom/dbmf         Memory management for frequent alloc/free 
-     base/src/libCom/ellLib       EPICS double linked list 
-     base/src/libCom/env          Default EPICS environment settings 
-     base/src/libCom/error        Error handling definitions and routines 
-     base/src/libCom/fdmgr        File descriptor manager 
-     base/src/libCom/freeList     Memory management using free lists 
-     base/src/libCom/gpHash       General purpose hash table 
-     base/src/libCom/logClient    Logging client 
-     base/src/libCom/macLib       Macro substitution handler 
-     base/src/libCom/misc         Miscellaneous utilities 
-     base/src/libCom/osi          Operating system independent code 
-     base/src/libCom/osi/os       Operating system dependant code in subdirectories 
-     base/src/libCom/taskwd       Task watchdog 
-     base/src/libCom/test         Test tools (timer, semBinary, semMutex,fdmgr, ?) 
-     base/src/libCom/timer        Timer 
-     base/src/libCom/tsDefs       R3.13 time stamp definitions and routines 
-     base/src/libCom/ring         ringPointer: First in first out circular buffers 
-     base/src/libCom/cppStd       epicsList: Lists of pointers to objects 
-     base/src/makeBaseApp         Perl tool+templates to create ioc app dvl tree 
-     base/src/makeBaseExt         Perl tool+templates to create extension dvl tree 
-     base/src/misc                Miscellaneous (coreRelease, iocInit, asSub*) 
-     base/src/rec                 Record support 
-     base/src/registry            EPICS support function registry 
-     base/src/rsrv                Channel access ioc resource server library 
-     base/src/toolsComm           Code for the build tools antelope and e_flex 
-     base/src/util                Utilities (ca_test, iocLogServer, startCArepeater) 
-     base/src/vxWorks             R3.13 compatibility code specific to vxWorks 
-     base/startup                 Scripts for setting up path and environment 
-
-     Install directories created by the build: 
-
-     base/bin                     Installed scripts and executables in subdirs 
-     base/lib                     Installed libraries in arch subdirectories 
-     base/dbd                     Installed data base definitions 
-     base/include                 Installed header files 
-     base/include/os              Installed os specific header files 
-     base/templates               Installed templates 
-
-Build related components
-
-     base/README* files 
-     README.htm           Instructions for setup and building epics base 
-                          (i.e. this document) 
-     README.WIN32         Microsoft WIN32 specific instructions 
-     README.cxxTemplates  Information about C++ templates in EPICS base 
-     README.niCpu030      NI cpu030 specific instructions 
-       
-     base/startup directory - contains scripts to set environment and path 
-     EpicsHostArch       c shell script to set EPICS_HOST_ARCH env variable 
-     EpicsHostArch.pl    perl script to set EPICS_HOST_ARCH env variable 
-     Site.profile        bourne shell script to set path and env variables 
-     Site.cshrc          c shell script to set path and env variables 
-     borland.bat         WIN32 bat file to set path and env variables 
-     win32.bat           WIN32 bat file to set path and env variables 
-       
-     base/configure  directory - contains build definitions and rules 
-     CONFIG.CrossCommon    Cross build definitions 
-     CONFIG.gnuCommon      Gnu compiler build definitions for all archs 
-     CONFIG_ADDONS         Definitions for <osclass> and DEFAULT options 
-     CONFIG_BASE           EPICS base tool and location definitions 
-     CONFIG_BASE_VERSION   Definitions for EPICS base version number 
-     CONFIG_COMMON         Definitions common to all builds 
-     CONFIG_ENV            Definitions of EPICS environment variables 
-     CONFIG_SITE           Site specific make defintions 
-     CONFIG_SITE_ENV       Site defaults for EPICS environment variables 
-     CONFIG                Includes configure files and allows variable overrides 
-     RELEASE               Location of external products such as Tornado II 
-     RULES                 Includes appropriate rules file 
-     RULES.Db              Rules for database and database definition files 
-     RULES_ARCHS           Definitions and rules for building architectures 
-     RULES_BUILD           Build and install rules and definitions 
-     RULES_DIRS            Definitions and rules for building subdirectories 
-     RULES_JAVA            Definitions and rules for java jars and classes 
-     RULES_TOP             Rules specific to a <top> dir (uninstall and tar) 
-     Sample.Makefile       Sample makefile with comments 
-       
-     base/configure/os directory - contains os-arch specific definitions 
-     CONFIG.<host>.<target>      Specific host-target build definitions 
-     CONFIG.Common.<target>      Specific target definitions for all hosts 
-     CONFIG.<host>.Common        Specific host definitions for all targets 
-     CONFIG.UnixCommon.Common    Definitions for Unix hosts and all target 
-     CONFIG.<host>.vxWorksCommon Specific host definitions for all vx targets 
-     CONFIG_COMPAT               R3.13 arch compatibility definitions 
-     CONFIG_SITE.<host>.<target> Site specific host-target definitions 
-     CONFIG_SITE.Common.<target> Site specific target defs for all hosts 
-     CONFIG_SITE.<host>.Common   Site specific host defs for all targets 
-       
-     base/configure/tools directory - contains Perl scripts used for the build 
-     MakeReleae              Unix shell script to create a release tar file
-     convertRelease.pl       Performs consistancy checks on RELEASE files
-     cp.pl                   This Perl script copies an existing file 
-     installEpics.pl         Installs built files into install directories. 
-     makeDependsTargets.pl   Creates targets of include dependency files
-     makeMakefile.pl         Creates a Makefile in O.<arch> dirs 
-     makeMakefileInclude.pl  Creates file to be included by Makefile 
-     mkdir.pl                Creates a directory (like Unix mkdir) 
-     mkmf.pl                 Generates dependencies from include stmnts 
-     munch.pl                Creates a ctdt.c file for vxWorks targets 
-     mv.pl                   Renames an existing file. 
-     replaceVAR.pl           Changes CapFast VAR(xxx) to $(xxx) notation 
-     rm.pl                   Quietly removes an existing file.
-
-Building EPICS base (Unix and Win32)
-
-     Unpack file 
-
-         Unzip and untar the distribution file. Use WinZip on
-         Windows systems.
-
-     Set environment variable 
-
-         Files in the base/startup directory have been provided to help
-         set required path and other environment variables .
-
-         EPICS_HOST_ARCH
-         Before you can build or use EPICS R3.14, the environment
-         variable EPICS_HOST_ARCH must be defined. A perl
-         script EpicsHostArch.pl in the base/startup directory has
-         been provided to help set EPICS_HOST_ARCH. You should
-         have EPICS_HOST_ARCH set to your host operating
-         system followed by a dash and then your host architecture,
-         e.g. solaris-sparc. If you are not using the OS vendor's
-         c/c++ compiler for host builds, you will need another dash
-         followed by the alternate compiler name (e.g. "-gnu" for GNU
-         c/c++ compilers on a solaris host or "-borland" for Borland
-         c/c++ compilers on a WIN32 host) .  See configure/CONFIG_SITE 
-         for a list of supported EPICS_HOST_ARCH values.
-
-         PERLLIB
-         On WIN32, some versions of Perl require that  the
-         environment variable PERLLIB be set to <perl directory
-         location>.
-
-         PATH
-         As already mentioned, you must have the perl executable
-         and you may need C and C++ compilers in your search path.
-         For building base you also must have echo in your search
-         path. For Unix host builds you also need touch, cpp, cp, rm,
-         mv, and mkdir in your search path and /bin/chmod must
-         exist. On some Unix systems you may also need ar and ranlib
-         in your path, and the c compiler may require ld in your path. 
-
-         Unix LD_LIBRARY_PATH
-         If you plan to build EPICS base shared libraries instead of
-         archive libraries, on Unix systems you will need to add 
-         fullpathname to $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) to
-         your LD_LIBRARY_PATH environment variable. 
-
-         Win32 PATH
-         On WIN32 systems, building shared libraries is the default
-         setting and you will need to add  fullpathname to
-         $(INSTALL_LOCATION)/bin/$(EPICS_HOST_ARCH) to your path.
-         Building shared libraries is determined by the value of the
-         macro SHARED_LIBRARIES in CONFIG_SITE (either YES or NO).
-
-
-     Do site-specific build configuration 
-
-         Site configuration 
-         To configure EPICS, you may want to modify the default
-         definitions in the following files: 
-
-              configure/CONFIG_SITE     Build choices. Specify target archs. 
-              configure/CONFIG_SITE_ENV Environment variable  defaults 
-              configure/RELEASE         TORNADO 2 full path location
-
-         Host configuration 
-         To configure each host system, you may override the default
-         definitions by adding a new file with override definitions into
-         the configure/os directory. The new file should have the
-         same name as the distribution file to be overridden except
-         with CONFIG in the name changed to CONFIG_SITE. 
-
-              configure/os/CONFIG.<host>.<host> - Host build settings 
-              configure/os/CONFIG.<host>.Common - Host cross build settings
-
-         Target configuration 
-         To configure each target system, you may override the
-         default definitions by adding a new file with override
-         definitions into the configure/os directory. The new file
-         should have the same name as the distribution file to be
-         overridden except with CONFIG in the name replaced by
-         CONFIG_SITE. 
-
-              configure/os/CONFIG.Common.<target> - Target cross settings
-              configure/os/CONFIG.<host>.<target> - Host-target settings
-
-         R3.13 compatibility configuration 
-         To configure EPICS base for building with R3.13 extensions
-         and ioc applications, you must modify the default definitions
-         in the base/config/CONFIG_SITE* files to agree with definitions
-         you made in base/configure and base/configure/os files.
-
-     Build EPICS base
-
-         After configuring the build you should be able to build
-         EPICS base by issuing the following commands in the
-         distribution's root directory (base) 
-
-              gnumake clean uninstall 
-              gnumake
-
-         The command "gnumake clean uninstall" will remove all
-         files and directories generated by a previous build. The
-         command "gnumake" will build and install everything for
-         the configured host and targets. 
-         It is recommended that you do a "gnumake clean uninstall"
-         at the root directory of an EPICS  directory structure before
-         each complete rebuild to ensure that all components will be
-         rebuilt.
-
-Multiple host platforms
-
-     You can build using a single EPICS directory structure on multiple host
-     systems and for multiple cross target systems. The intermediate and
-     binary files generated by the build will be created in separate
-     subdirectories and installed into the appropriate separate host/target
-     install directories. EPICS executables and perl scripts are installed 
-     into the $(INSTALL_LOCATION)/bin/<arch> directories. Libraries are
-     installed into $(INSTALL_LOCATION)/lib/<arch>. The default
-     definition for $(INSTALL_LOCATION) is $(TOP) which is the root
-     directory in the distribution directory structure, base. Created object
-     files are stored in O.<arch> source subdirectories, This allows objects
-     for multiple cross target architectures to be maintained at the same
-     time. To build EPICS base for a specific host/target combination you
-     must have the proper host/target c/c++ cross compiler and target header
-     files and the base/configure/os directory must have the appropriate
-     configure files.
-
-Example application and extension
-
-     A perl tool, makeBaseApp.pl is included in the distribution file. This
-     script will create a sample application that can be built and then
-     executed to try out this release of base. Also, a perl script,
-     makeBaseExt.pl, is included in the distribution file. This script will
-     create a sample extension that can be built and executed. The
-     makeBaseApp.pl and makeBaseExt.pl scripts are installed into the
-     install location bin/<hostarch> directory during the base build.
-
-     Instructions for building and executing the 3.14 example application
-     can be found in the section "Example Application" of Chapter 2, "New
-     Features for 3.14", in the  "IOC Application Developer's Guide
-     R3.14.0beta1". The "Example Application" section briefly explains
-     how to create and build an example application in a user created <top>
-     directory. It also explains how to run the example application on a
-     vxWorks ioc or a host system and run an example channel access client
-     on the host system.
+Notes:
+
+1. Before you can build or use EPICS, the environemnt variable HOST_ARCH
+   must be set. The base/startup/HostArch script file has been provided
+   to set HOST_ARCH.
+
+2. You must use GNU make (which is now THE supported make utility) for
+   the build, gnumake.  Set your path so that a recent version (e.g.
+   V3.70) of gnumake is available.
+
+3. You must have perl installed. See the README.Perl in this directory. The
+   config files specify the perl full pathname  as /usr/bin/perl for
+   unix builds and C:\Perl\bin\perl for WIN95/NT builds. You can override
+   these specifications with a CONFIG_SITE_HOST_ARCH.<host_arch> file. 
+
+4. You may need vendors C and C++ compilers in your search path. (Check
+   the definitions of ACC and CCC in CONFIG.Host.<host_arch> or gnu GCC
+   and G++ if ANSI=GCC and CPLUSPLUS=GCC are specified in CONFIG_SITE).
+
+4. For building base you must have echo in your search path. For unix host
+   builds you must also have ar, cp, rm, mv, ranlib, and mkdir in your search
+   path and /bin/chmod must exist. 
+
+----------------------------------------------------------------------------
+   Part 1 - Configuring and Building EPICS Base
+----------------------------------------------------------------------------
+
+1.1  To configure EPICS, edit the following file:
+
+   config/CONFIG_SITE      - Build choices/HOST_ARCH/Vx location.
+   config/CONFIG_SITE_ENV  - For site-specific environment settings
+
+   For a specific host architecture you may want to edit the following file 
+   config/CONFIG_SITE.Host.<arch>      - Override Host build settings for a host arch
+   config/CONFIG_SITE.Vx.<arch>        - Override Vx build settings for a host arch
+   config/CONFIG_SITE_HOST_ARCH.<arch> - Override build settings for a host arch
+ 
+   Optionally you may want to edit the following files 
+   config/CONFIG_SITE.Host - Override Host build settings for all host archs.
+   config/CONFIG_SITE.Vx   - Override Vx build settings for all host archs.
+   config/CONFIG           - Override build settings for all host archs.
+
+1.2  To add a target architecture to EPICS:
+
+   cd base/config
+   cp CONFIG.Vx.mv167 CONFIG.Vx.YOUR_ARCH
+   edit CONFIG.Vx.YOUR_ARCH   - For compiler flags / etc.
+
+   edit CONFIG_SITE    - Add architecture to CROSS_COMPILER_TARGET_ARCHS list.
+
+1.3  To build EPICS:
+
+   cd epics/base
+   gnumake             - To install include files, build and install EPICS.
+                         (Same as "gnumake inc install")
+   gnumake all         - Same as "gnumake"
+   gnumake clean       - To clean temporary object files.  Top level 
+                         clean will remove the O.ARCH dirs specified
+                         in BUILD_ARCHS.
+   gnumake uninstall   - Only available at the top level directory.
+                         Cleans directories created by the install.
+   gnumake rebuild     - Same as "gnumake clean all"
+
+1.4  "Partial" build commands:
+
+     The complete set of targets now supported are: 
+
+            action 
+            arch 
+            action.arch 
+            dir 
+            dir.action 
+            dir.arch 
+            dir.action.arch 
+
+      where: 
+            action can be clean, inc, install, depends, or build
+            action can also be uninstall or rebuild at top level only
+            dir is the name of a subdirectory. 
+            arch can be host, cross, sun4, solaris, mv167, ... 
+
+    Examples are:
+
+       gnumake inc              - To install include files
+       gnumake install.host     - To build and install EPICS for host arch.
+       gnumake install.cross    - To build and install EPICS for Vx archs.
+       gnumake clean.sun4       - Cleans sun4 binaries in O.sun4 dirs only.
+       gnumake install.sun4     - Builds sun4 only.
+       gnumake install.mv167    - Builds mv167 only (a HOST_ARCH build must
+                                  be complete before this can be issued).
+
+NOTES:
+
+   1. EPICS binaries and shell scripts are installed into the directory
+      $(INSTALL_LOCATION)/bin/ARCH.
+
+   2. EPICS libraries are installed into the $(INSTALL_LOCATION)/lib/ARCH
+      directory.
+
+   3. During a normal build (a "make" or "make install"), the "depends"
+      dependency will NOT be invoked.  Only if "make depends" is run
+      explicitly, or a "make built_release" is performed will dependencies
+      be generated automatically.
+   
+   4. Temporary objects are stored in src/DIR/O.ARCH, This allows objects
+      for multiple architectures to be maintained at the same time.
+      While developing source for EPICS, merely cd src/DIR/O.ARCH, and
+      invoke "make":
+
+      cd epics/base/src/db/O.mv167
+      make dbAccess.o
+
+      The above example instructs make to build dbAccess.o for the
+      mv167 target.
+
+----------------------------------------------------------------------------
+   Part 2  ---  Configuration Files in epics/base/config
+----------------------------------------------------------------------------
+CONFIG - This file is meant to be included in the low-level EPICS Makefiles.
+It includes the other EPICS makefiles, and allows individual developers
+and the EPICS system manager to override specific variables in the rest of
+the configuration.
+----------------------------------------------------------------------------
+CONFIG_SITE - This file is meant to be changed only by the EPICS system
+manager.  It specifies:
+
+	HOST_ARCH: The system's host architecture (sun4/hp700/etc).
+               This now come from an environment variable.
+	CROSS_COMPILER_HOST_ARCHS: List of unix architectures with cross_compilers. 
+	CROSS_COMPILER_TARGET_ARCHS: List of architectures to build epics for.
+	VX_DIR: Location of vxWorks.
+	STATIC_BUILD: Whether or not to build clients statically.
+	etc.
+
+----------------------------------------------------------------------------
+CONFIG.Host.ARCH - This file defines a particular host architecture.  It
+contains the following variables:
+
+ 	ARCH_CLASS: solaris / sun4 / hp700 / etc.
+        Host architecture OS vendor C and C++ complier variables.
+	Architecture dependent build flags.  The flag names / contents
+		depend on your architecture class.
+----------------------------------------------------------------------------
+CONFIG_HOST_ARCH.ARCH - This file contains the following variable:
+
+ 	WIND_HOST_TYPE: sun4-solaris2 / sun4-sunos4 /  x86-win32 / etc.
+----------------------------------------------------------------------------
+----------------------------------------------------------------------------
+CONFIG.Vx.ARCH - This file defines a particular target architecture.  It
+contains the following variables:
+
+ 	ARCH_CLASS: 68k / sun4 / hp700 / etc.
+	Architecture dependent build flags.  The flag names / contents
+		depend on your architecture class.
+	CMPLR_SUFFIX: Vx GNU cross compiler suffix definition. 
+----------------------------------------------------------------------------
+----------------------------------------------------------------------------
+CONFIG_SITE.BUILD_TYPE.ARCH - Contains site specific definitions pertaining to a
+particular architecture and build type.  This file's primary usefulness is to
+define site specific compile and link flags.
+----------------------------------------------------------------------------
+CONFIG_COMMON - Contains definitions describing the layout of base 
+	and definitions common to all builds.
+----------------------------------------------------------------------------
+CONFIG.Host.UnixCommon - Contains host definitions common to all Unix archs.
+----------------------------------------------------------------------------
+CONFIG_BASE -  Defines what subdirectories get built by default under base.
+----------------------------------------------------------------------------
+CONFIG_BASE_VERSION - Defines the version of base. 
+----------------------------------------------------------------------------
+CONFIG_ENV - EPICS Environment Parameter configuration file.
+----------------------------------------------------------------------------
+CONFIG_SITE_ENV - EPICS Environment Parameter Site configuration file
+----------------------------------------------------------------------------
+RULES.Vx - Rules for building with Makefile.Vx makefiles.
+----------------------------------------------------------------------------
+RULES.Host - Rules for building with Makefile.Host makefiles.
+----------------------------------------------------------------------------
+RULES_TOP - Top level rules for building.
+----------------------------------------------------------------------------
+RULES_ARCHS
+RULES_DIRS - Allows top-level type command syntax in low-level directories.
+----------------------------------------------------------------------------
+
+    Table of files to change when building and adding architectures.
+	etc.
+
+Filename                  SYS_MGR  ADD_VX_ARCH  ADD_UNIX_ARCH  DEVELOPER
+
+CONFIG                       m         -             -             m
+CONFIG_SITE                  m         m             m             -
+CONFIG_SITE_ENV              m         -             -             -
+CONFIG.Host.ARCH             -         c             c             -
+CONFIG_HOST_ARCH.ARCH        -         c             c             -
+CONFIG_SITE.Host.ARCH        -         -             -             -
+CONFIG.Vx.ARCH               -         c             c             -
+CONFIG_SITE.ARCH             -         c             c             -
+CONFIG.Vx.ARCH_CLASS         -         c*            -             -
+RULES.Vx                     -         -             -             -
+RULES.Host                   -         -             -             -
+CONFIG_BASE                  -         -             -             -
+CONFIG_BASE_VERSION          -         -             -             -
+CONFIG_COMMON                -         -             -             -
+CONFIG_ENV                   -         -             -             -
+RULES_ARCHS                  -         -             -             -
+RULES_DIRS                   -         -             -             -
+RULES_TOP                    -         -             -             -
+
+     m -  Modify an existing file.
+     c -  Create a new file.
+
+     * -  Create an ARCH_CLASS file only if you are adding a
+             fundamentally new architecture, such as hp700 or
+             a SPARC VME board.  If your board is 68k based,
+             you will not need to create CONFIG.Vx.68k,
+             since it already exists !
+
+----------------------------------------------------------------------------
+   Part 3  ---  Configuration File Inclusion Tree Examples
+----------------------------------------------------------------------------
+----------------------------  hkv2f example --------------------------------
+            (files are numbered in the order of their inclusion)
+
+ src/db/Makefile.Vx     (An example EPICS makefile)
+    ^   ^
+    |   +--- 2.  RULES.Vx
+    |              Default rules.
+    +----1.  CONFIG_BASE
+             ^
+             |
+             + 1. CONFIG
+                  ^^^^^^^
+                  ||||||+- 1. CONFIG_COMMON
+                  ||||||          General info about base.
+                  |||||+-- 2. CONFIG_BASE_VERSION
+                  |||||           Base version.
+                  ||||+--- 3. CONFIG_SITE
+                  ||||             HOST_ARCH = sun4
+                  ||||             CROSS_COMPILER_TARGET_ARCHS = mv167 hkv2f
+                  ||||             VX_DIR = /vxworks
+                  ||||             More.
+                  |||+---- 4. CONFIG_HOST_ARCH.sun4
+                  |||              WIND_HOST_TYPE =  sun4-sunos4
+                  ||+----- 5. CONFIG.Vx
+                  ||               Definitions for Vx builds 
+                  |+------ 6. CONFIG.Vx.hkv2f
+                  |                ARCH_CLASS = 68k 
+                  |                Arch Specific Compiler Flag Setup
+                  |                Vx GNU cross compiler suffix
+                  +------- 7. CONFIG_SITE.Vx.hkv2f
+                                   Site Specific setup 
+
+----------------------------  sun4  example --------------------------------
+            (files are numbered in the order of their inclusion)
+
+ src/db/Makefile.Unix   (An example EPICS makefile)
+    ^   ^
+    |   +--- 2.  RULES.Vx
+    |              Default rules.
+    +----1.  CONFIG_BASE
+             ^
+             |
+             + 1. CONFIG
+                   ^^^^^
+                   |||||+- 1. CONFIG_COMMON
+                   |||||          General info about base.
+                   ||||+-- 2. CONFIG_BASE_VERSION
+                   ||||           Base version.
+                   |||+--- 3. CONFIG_SITE
+                   |||             HOST_ARCH = sun4
+                   |||             CROSS_COMPILER_TARGET_ARCHS = mv167 hkv2f
+                   |||             VX_DIR = /vxworks
+                   |||             More.
+                   ||+---- 4. CONFIG_HOST_ARCH.sun4
+                   ||              WIND_HOST_TYPE =  sun4-sunos4
+                   |+----- 5. CONFIG.Host.sun4
+                   |               ARCH_CLASS = sun4 
+                   |               Arch Specific Compiler Flag Setup
+                   |               Vx GNU cross compiler suffix
+                   +------ 6. CONFIG_SITE.Host.sun4
+                                   Site Specific setup 
 
 

README.Linux

@@ -0,0 +1,17 @@
+                     Special Notes on Linux
+
+At this point, support for Linux only involves channel access
+clients.  Since Vxworks is not available for Linux, you must
+use other platforms for developing server side code.
+
+You MUST start caRepeater by hand before running a client.  
+Prior to running a client, you must run:
+
+caRepeater &
+
+---
+jpq@nwu.edu
+
+
+
+

README.Perl

@@ -0,0 +1,44 @@
+Perl
+====
+
+A number of shell scripts are now Perl scripts,
+most important:
+
+tools/installEpics.pl
+include/makeEpicsVersion.pl
+libCom/bldEnvData.pl
+libCom/makeStatTbl.pl
+sequencer/makeVersion.pl
+
+WIN32 also uses
+tools/cp.pl, mv.pl, rm.pl, mkdir.pl
+which should behave like the UNIX cp, mv, rm, rmdir.
+All systems could use the Perl versions but that seems
+to be overkill for UNIX.
+
+Advantages:
+* no need for ls, date, basename, grep, awk, sed, ...,
+  which made the make UNIX-specific.
+* Perl is currently available for Unix, OS/2, WIN32, VMS
+  and the scripts should work on all those systems
+
+Disadvantage:
+* You have to get Perl, look e.g. at http://www.perl.com
+* Perl version 5.003_02 works, we don't know about earlier versions.
+
+
+Compile Perl:
+No big deal,
+* on UNIX say 'configure' and 'gnumake',
+* on Windows use MX Visual C++,
+  use File/Open Workspace to open the Makefile {PERL}/perl5i.mak,
+  use Build/Batch build to select eiher the Release or Debug targets.
+
+  You can do the same with the Makefile {Perl}/Ext/WIN32/win32.mak
+  - nice tools but not necessary for EPICS.
+
+  Then call {PERL}/bin/perlw32-install.bat
+
+In any case, read the texts that come with perl!
+
+

README.WIN32

@@ -1,8 +1,8 @@
 
-Compiling EPICS and Building IOC Applications on win32-x86 (Windows95/NT) 
+Compiling EPICS and Building IOC Applications on WIN32 (Windows95/NT) 
 ---------------------------------------------------------------------
 
-Original port of EPICS base build system to WIN32 (Windows95/NT)
+Original port of EPICS base to WIN32 (Windows95/NT)
 was done by Kay-Uwe Kasemir 11/96
 
 please mail questions, comments, corrections, additional examples, etc 
@@ -11,9 +11,9 @@ please mail questions, comments, corrections, additional examples, etc
 0) what you will get
 --------------------
 
-Right now this port of EPICS to win32-x86 should allow you to
+Right now this port of EPICS to WIN32 should allow you to
 
-* compile all of EPICS base using {Tornado, MS Visual C, perl,
+* compile almost all of EPICS base using {Tornado, MS Visual C, perl,
   GNU make} (only {MS Visual C, perl, GNU make} if you prefer
   to compile only the host portions of EPICS base).
 * load EPICS on an IOC (486, pentium, 68k, ...),
@@ -23,19 +23,15 @@ Right now this port of EPICS to win32-x86 should allow you to
 * build and use ca.dll on NT or Win95 to access all IOCs,
   as well as the Com-library, gdd-library, cas-library,
   and all other EPICS base libraries as DLLs.
-* build gdd, cas and a demo of the new portable CA server on win32-x86.
-
-To build only for win32-x86 and not cross compile for IOC development type 
-"make win32-x86" or in your configure/CONFIG_SITE file set 
-"CROSS_COMPILER_HOST_ARCHS="
+* build gdd, cas and a demo of the new portable CA server on WIN32.
 
 1) see what you have
 --------------------
 
-To compile EPICS on win32-x86, we need
+To compile EPICS on WIN32, we need
 
 	WindRiver System's Tornado (used: 1.0)  (not required if host only build)
-	Microsoft's Visual C/C++   (used: 6.0)  (borland C++ rumored to work also)
+	Microsoft's Visual C/C++   (used: 4.0)  (borland C++ rumored to work also)
 
 and some tools:
 
@@ -51,31 +47,22 @@ If you cannot/don't want to find them, contact me, please!
 (Setting env. vars. is different: for NT, use Settings/System,
 for Win95 use autoexec.bat)
 
-When setting paths in the EPICS CONFIG files for win32-x86 the following
-are hints in case you have trouble. You should not need to worry about 
-this unless you type a path into one of the EPICS config files that 
-includes a "\". In most situations gnu make, windows NT, the MS compiler,
-and the MS linker will accept "/" and this will result in less trouble.
+When setting paths in the EPICS CONFIG files for WIN32:
 
-	** Note that that each "\" in any path variables you set
+	** Note that that each "\" in any path variables
 		must be replaced with a "\\" (this is because GNU make treats
 		all "\" characters as line continuation)
 
 	** Note that that each space in any file name or 
-        path name variable you set must be replaced with 
+        path name variable must be replaced with 
         a "\ " (this is because GNU make treats all " " separated
         input as independent tokens in the input stream.
 
-	** win32-x86 will generally allow "/" and "\" interchangeably in file paths,
-		but the DOS shell only accepts "\".
-
-    ** Certain command line utilities such as the MS linker are known to in rare
-        situations confuse "/" in a path with command line options, and it may
-        be necessary to replace a "/" in a path that configured with "\\", but
-        the bulk of our experience indicates that this is not the necessary.
+	** WIN32 will generally allow "/" and "\" interchangeably in file paths,
+		but the DOS shell appears to only accept "\".
 
 Your path should include:
-- The EPICS-binaries that we are about to build in <EPICS>base/bin/win32-x86
+- The EPICS-binaries that we are about to build in <EPICS>base/bin/WIN32
 - The System (for me it's in NT40...)
 - The MS Visual C compiler binaries
 
@@ -108,7 +95,7 @@ include=c:\msdev\include;c:\msdev\mfc\include
 lib=c:\msdev\lib;c:\msdev\mfc\lib
 
 Select host arch to build:
-EPICS_HOST_ARCH=win32-x86			(used by the make system)
+HOST_ARCH=WIN32			(used by the make system)
 
 Set the "TMP" environment variable if you need to specify where 
 temporary files are created.
@@ -139,7 +126,7 @@ Prepare apx. 2 ltr. Tee and type:
 Watch for errors and send them to me.
 
 Known problems:
-* gnumake seems to be faster than win32-x86 sometimes
+* gnumake seems to be faster than WIN32 sometimes
   which results in warnings/errors like
   "file has modification date in the future"
   for newly created things.
@@ -150,7 +137,7 @@ Known problems:
   WIN32 is WIN32, not win32. Gnumake fails
   if e.g. base/src/include/os/WIN32 is ...win32.
 
-4) Creating EPICS IOC applications under win32-x86
+4) Creating EPICS IOC applications under WIN32
 
 o create application development folder
 	
@@ -182,37 +169,13 @@ style project. This allows EPICS programs to be developed directly inside of
 the visual C++ environment. To do this create a "makefile" project and place your 
 gnu make command in the build configuration (accessed from the project/settings menu). 
 You will also need to add GNU make and <EPICS>/bin/win32 into the Visual C++ 
-executable search path (from the tools/options menu). 
-In visual C++ it is possible to double click on the compiler 
+executable search path (from the tools/options menu). I have not so far determined 
+how to configure visual C++ so that it is possible to double click on the compiler 
 error messages generated within an EPICS "makefile" style project and have visual 
-C++ immediately position the cursor on the corresponding line in the source. I
-have found that this works correctly with Makefile projects if the project is in a 
-directory just below the source code. The following build command works well
-in a visual C++ make file project: "kill caRepeater.exe&make -C ..". Be careful 
-not to introduce additional spaces around the &. The kill.exe command is in the
-NT resource kit.
+C++ immediately position the cursor on the corresponding line in the source (as is 
+normally the case in the visual C++ environment). If you solve this problem please 
+forward the details to johill@lanl.gov.
 
-6) Issues that you should be aware of if you are building code that 
-calls EPICS, but you are not using the EPICS build system.
+Good luck !
 
-6a) You will need to include header files from the following paths.
-    <epics>\base\include
-    <epics>\base\include\os\win32
-6b) You will need to link with the following path in effect.
-    <epics>\base\lib\win32-x86. 
-6c) If the visual C++ /Za option is not used then you will also need to define 
-    __STDC__ to be zero on the command line so that EPICS headers will know that
-    a ANSI standard C compiler is in use. 
-6d) If you link with EPICS object libraries then specify /MT or /MTd
-    depending on whether EPICS base and your code are built for debugging. 
-    This specifies the multithreaded operating environment required by EPICS.
-    This will also not define _DLL and therefore the EPICS header files will
-    not specify that sharable libraries are being called. EPICS object library 
-    names follow the convention "xxxObj.lib".
-6e) If you link with EPICS shareable libraries (with DLLs) then you must 
-    use /MDd or /MD depending on whether EPICS base and your code are 
-    built for debugging. This specifies the multithreaded operating environment 
-    required by EPICS. This will also define _DLL and therefore the EPICS header 
-    files will specify an optimized calling convention for shareable libraries. 
-    EPICS shareable libraries (DLL) names follow the convention "xxx.lib"
-    and "xxx.dll".
+-Kay

README.cxxTemplates

@@ -0,0 +1,46 @@
+
+The C++ templates supplied with EPICS base are in 
+"$(EPICS)/base/src/cxxTemplates".
+
+In Stroustrups's "The C++ Programming Language" Appendix A: r.14.9
+(ANSI/ISO resolutions) a mechanism is described for the explicit 
+instantiation of template member functions (that are not inline). 
+At this time some compilers do not support this mechanism (and use
+a template database snd/or smart linker instead). Other compilers 
+(such as g++) provide only limited support for other forms of
+instantiation (g++ does not yet provide a template database or 
+a smart linker for templates).
+
+Since there is no defacto standard mechanism for instatiating
+templates at this time we are defining the preprocessor flag 
+EXPL_TEMPL in the build system when the compiler supports
+explicit instantiation and the compiler does not support
+automatic instantiation via a smart linker and/or template
+database (currently this is only g++).
+
+EPICS codes that use templates may need to include a code block
+as follow that instantiates the template only once into each
+program.
+
+#include <classXYZ.h>
+#include <templXXX.h>
+
+//
+// if the compiler supports explicit instantiation of
+// template member functions
+//
+#if defined(EXPL_TEMPL)
+        //
+        // From Stroustrups's "The C++ Programming Language"
+        // Appendix A: r.14.9
+        //
+        // This explicitly instantiates the template class's member
+        // functions into "templInst.o"
+        //
+        template class templXXX <classXYZ>;
+#endif
+
+Jeff Hill 3-6-97
+johill@lanl.gov
+
+

README.cygwin32

@@ -0,0 +1,54 @@
+Compiling EPICS on cygwin32 (Windows95/NT)
+------------------------------------------
+
+Right now this port of EPICS base to cygwin32 R1.3.3 fails
+because cygwin does not yet support point-to-point interfaces.
+ 
+To build EPICS on Win95 or NT using cygwin32, we need
+
+        EPICS base distribution, R3.12.0.beta12 or later, available
+           from http://aps.anl.gov/...
+        The latest cygwin distribution, available from 
+           http://www.cygwin.com
+
+BUILD INSTRUCTIONS
+------------------
+
+
+1) Install the cygwin binary release
+------------------------------------
+
+2) Install the epics base distribution
+--------------------------------------
+        cp <dirname>\<basereleasename>.tar.gz .
+        gunzip -d <basereleasename>.tar.gz
+        tar xvf <basereleasename>.tar
+        chmod +w -R *
+        cd <epicsBaseDir>
+
+3) Set environment variables and path using cygwin32.bat
+-------------------------------------------------------------
+        <edit <epicsBaseDir>/startup/cygwin32.bat changing paths if necessary>
+        cd <epicsBaseDir>\startup
+        edit cygwin32.bat
+        <execute cygwin32.bat>
+         cygwin
+
+4) Set site specific parms in epics config files
+------------------------------------------------
+	cd <epicsBaseDir>\config
+	<edit CONFIG_SITE* files>
+
+5) Build epics base
+-------------------
+        cd <epicsBaseDir>
+        make
+
+6) Create an example EPICS application (<epicsBaseDir> needs drive letter)
+--------------------------------------------------------------------------
+        mkdir <epicsappdir>
+        cd <epicsappdir>
+        perl <epicsBaseDir>\bin\cygwin32\makeBaseApp.pl -l
+        perl <epicsBaseDir>\bin\cygwin32\makeBaseApp.pl -t example example
+        make
+

README.hp700_alpha

@@ -0,0 +1,28 @@
+#
+# supplement README for HP700 
+#
+# Johnny Tang  5-29-97
+#
+
+1. VxWorks 5.2 for HP-UX
+
+   - Make sure that you have set VX_DIR and VX_GNU to your
+     VxWorks root directory. 
+
+   - Under $(VX_DIR), create a soft link:
+     hp700.68k -> hp9700.68k
+
+2. Modify base/config/CONFIG_SITE file
+
+   - ANSI=HPACC
+   - STANDARD=HPCC
+   - CPLUSPLUS=G++
+
+3. HP native c++ compiler has problem to handle the head files
+   in which a inline function is used in conjuction with template
+
+   base/src/cas, the portable CA server can't be compiled successfully
+   because of the above limitation.
+
+   This problem can be resolved by spliting the function declarations
+   from the inline code in the files in base/src/cxxTemplates.

README.htm

@@ -1,538 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="Author" content="jba">
-   <meta name="GENERATOR" content="Mozilla/4.77 [en] (X11; U; SunOS 5.8 sun4u) [Netscape]">
-</head>
-<body>
-README.htm
-<center>
-<h1>
-Installation Instructions</h1></center>
-
-<center>
-<h2>
-EPICS base</h2></center>
-
-<center>
-<h2>
-Release 3.14.0beta1</h2></center>
-
-<h3>
-What is EPICS base?</h3>
-
-<blockquote>The Experimental Physics and Industrial Control Systems (EPICS)
-is an extensible set of software components and tools with which application
-developers can create a control system. This control system can be used
-to control accelerators, detectors, telescopes, or other scientific experimental
-equipment. EPICS base is the set of core software, i.e. the components
-of EPICS without which EPICS would not function. EPICS base allows an arbitrary
-number of target systems, IOCs (input/output controllers), and host systems,
-OPIs (operator interfaces) of various types.</blockquote>
-
-<h3>
-What is new in this release?</h3>
-
-<blockquote>This version of EPICS base contains significant changes and
-offers major improvements in functionality over previous versions. Please
-check the RELEASE_NOTES file in the distribution for description of changes
-and release migration details.</blockquote>
-
-<h3>
-Copyright</h3>
-
-<blockquote>Please review the COPYRIGHT* files included in the distribution
-for legal terms of usage.</blockquote>
-
-<h3>
-Supported platforms</h3>
-
-<blockquote>Currently this version of EPICS base has been built on the
-following hosts for the following targets. If you are trying to build EPICS
-base on a different host or for a different target machine you must get
-the proper host/target cross compiler and header files and you will have
-to create and add the appropriate new configure files to the base/configure/os/directory.
-You can start by copying existing configuration files in the configure/os
-directory and then make changes for your new platforms.</blockquote>
-
-<blockquote><b>Host platforms (operating system - architecture - &lt;alternate
-c++ compiler>)</b>
-<blockquote><tt>solaris-sparc</tt>
-<br><tt>solaris-sparc-gnu</tt>
-<br><tt>linux-x86</tt>
-<br><tt>win32-x86</tt>
-<br><tt>win32-x86-borland</tt></blockquote>
-</blockquote>
-
-<blockquote>
-<h4>
-Cross compile target platforms (operating system - architecture)</h4>
-</blockquote>
-
-<blockquote>
-<blockquote><tt>vxWorks-486</tt>
-<br><tt>vxWorks-68040</tt>
-<br><tt>vxWorks-68040lc</tt>
-<br><tt>vxWorks-68060</tt>
-<br><tt>vxWorks-ppc603</tt>
-<br><tt>vxWorks-ppc604</tt>
-<br><tt>vxWorks-pentium</tt>
-<br><tt>RTEMS-gen68360</tt>
-<br><tt>RTEMS-mvme167</tt>
-<br><tt>RTEMS-pc386</tt></blockquote>
-</blockquote>
-
-<h3>
-Supported compilers</h3>
-
-<blockquote>This version of EPICS base has been built and tested using
-the host vendor's C and C++ compilers as well as the GNU gcc and g++ compilers.
-The GNU cross-compilers have been used for all cross-compiled targets.
-You may need the host vendor's C++ compiler in your search path to do EPICS
-builds. Check definitions of ACC and CCC in base/configure/os/CONFIG.&lt;host>.&lt;host>
-or the definitions for GCC and G++ if ANSI=GCC and CPLUSPLUS=GCC are specified
-in CONFIG_SITE.</blockquote>
-
-<h3>
-Software requirements</h3>
-
-<blockquote><b>GNU make</b>
-<br>You must use GNU make, gnumake, for any EPICS builds.&nbsp; Set your
-path so that a gnumake version 3.70 or later is available.
-<p><b>Perl</b>
-<br>You must have perl version 5.0 or later installed. The configure files
-do not specify the perl full pathname.&nbsp; You need the perl executable
-in your search path.
-<p><b>Unzip and tar (Winzip on WIN32 systems)</b>
-<br>You must have tools available to unzip and untar the EPICS base distribution
-file.
-<p><b>Tornado 2.0</b>
-<br>You must have Tornado 2.0 installed if any of your target systems are
-vxWorks systems.&nbsp; Tornado 2.0 provides the cross-compiler and header
-files needed to build for these target systems. The full path location
-to Tornado 2.0 must be specified in the base/configure/RELEASE or base/configure/RELEASE.&lt;hostarch>
-file. You will also need one or more board support packages. Consult the
-vxWorks documentation for details.
-<p><b>Optional GNU compiler requirement for solaris-sparc&nbsp; and win32-x86
-hosts</b>
-<br>If you have state notation language source files (*.st files) which
-require c preprocessing before conversion to c source,&nbsp; gcc must be
-in your path.</blockquote>
-
-<h3>
-Host system storage requirements</h3>
-
-<blockquote>The GNU zipped tar file is approximately 1.4 MB in size. The
-unzipped untarred distribution source tree is approximately 6 MB. The build
-created files for each host take approximately 40 MB and the build created
-files for each target take approximately 10 MB.</blockquote>
-
-<h3>
-Documentation</h3>
-
-<blockquote>EPICS documentation is available on the WWW via the EPICS home
-page at APS:&nbsp; URL <a href="http://www.aps.anl.gov/Epics">http://www.aps.anl.gov/Epics</a></blockquote>
-
-<blockquote>This README.htm is in the base distribution file and will be
-available on the IOC software R3.14 EPICS WWW page which can be accessed
-from the APS EPICS home page.</blockquote>
-
-<h3>
-WWW pages</h3>
-
-<blockquote>
-<h4>
-EPICS home page at APS</h4>
-
-<blockquote><a href="http://www.aps.anl.gov/Epics">http://www.aps.anl.gov/epics</a></blockquote>
-
-<h4>
-Other WWW sites</h4>
-
-<blockquote>Additional information on EPICS can be found at the various
-other WWW links on the EPICS home page at APS.</blockquote>
-
-<h4>
-Mailing Lists</h4>
-
-<blockquote>There are five EPICS mailing lists provided by APS. See The
-EPICS home page for subscription instructions.</blockquote>
-</blockquote>
-
-<h3>
-Directory Structure</h3>
-
-<blockquote>Distribution directory structure:</blockquote>
-<tt>&nbsp;&nbsp;&nbsp;&nbsp; base&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Root directory of the base istribution</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/config&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-R3.13 compatibility build configuration files</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/config/tools&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Perl and shell scripts used in the R3.13 build</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/configure&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Operating system independent build config files</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/configure/os&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Operating system dependent build config files</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/configure/tools&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Perl and shell scripts used in the build</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/copyright&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Text files describing software copyrights</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-All epics base source code in subdirectories</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/as&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Access security</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/bpt&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Break point table</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/ca&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Channel access</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/cas&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Channel access server</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/db&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Database access</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/db/test&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Database access tests</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/dbStatic&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Static database access</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/dbtools&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Database dbLoadTemplate tools</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/dev&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Device support (softDev and testDev)</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/gdd&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-General data descriptor</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/iocsh&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Ioc shell command interpreter</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-General purpose library code in subdirectories</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/bucketLib&nbsp;&nbsp;&nbsp;
-Hash bucket</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/calc&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Algebraic expression interpreter</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/cvtFast&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Fast number to string conversion</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/cxxTemplates C++ templates
-and templates tests</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/dbmf&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Memory management for frequent alloc/free</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/ellLib&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-EPICS double linked list</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/env&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Default EPICS environment settings</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/error&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Error handling definitions and routines</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/fdmgr&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-File descriptor manager</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/freeList&nbsp;&nbsp;&nbsp;&nbsp;
-Memory management using free lists</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/gpHash&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-General purpose hash table</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/logClient&nbsp;&nbsp;&nbsp;
-Logging client</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/macLib&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Macro substitution handler</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/misc&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Miscellaneous utilities</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/osi&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Operating system independent code</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/osi/os&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Operating system dependant code in subdirectories</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/taskwd&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Task watchdog</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/test&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Test tools (timer, semBinary, semMutex,fdmgr, ?)</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/timer&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Timer</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/tsDefs&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-R3.13 time stamp definitions and routines</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/ring&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-ringPointer: First in first out circular buffers</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/libCom/cppStd&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-epicsList: Lists of pointers to objects</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/makeBaseApp&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Perl tool+templates to create ioc app dvl tree</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/makeBaseExt&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Perl tool+templates to create extension dvl tree</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/misc&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Miscellaneous (coreRelease, iocInit, asSub*)</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/rec&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Record support</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/registry&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-EPICS support function registry</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/rsrv&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Channel access ioc resource server library</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/toolsComm&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Code for the build tools antelope and e_flex</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/util&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Utilities (ca_test, iocLogServer, startCArepeater)</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/src/vxWorks&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-R3.13 compatibility code specific to vxWorks</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/startup&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Scripts for setting up path and environment</tt>
-<p><tt>&nbsp;&nbsp;&nbsp;&nbsp; </tt>Install directories created by the
-build:
-<p><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/bin&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Installed scripts and executables in subdirs</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/lib&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Installed libraries in arch subdirectories</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/dbd&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Installed data base definitions</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/include&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Installed header files</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/include/os&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Installed os specific header files</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp; base/templates&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Installed templates</tt>
-<h3>
-Build related components</h3>
-
-<blockquote>
-<li>
-base/README* files</li>
-
-<br><tt>README.htm&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Instructions for setup and building epics base</tt>
-<br><tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-(i.e. this document)</tt>
-<br><tt>README.WIN32&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Microsoft
-WIN32 specific instructions</tt>
-<br><tt>README.cxxTemplates&nbsp; Information about C++ templates in EPICS
-base</tt>
-<br><tt>README.niCpu030&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; NI cpu030 specific
-instructions</tt>
-<br>&nbsp;
-<li>
-base/startup directory - contains scripts to set environment and path</li>
-
-<br><tt>EpicsHostArch&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; c shell script
-to set EPICS_HOST_ARCH env variable</tt>
-<br><tt>EpicsHostArch.pl&nbsp;&nbsp;&nbsp; perl script to set EPICS_HOST_ARCH
-env variable</tt>
-<br><tt>Site.profile&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; bourne shell
-script to set path and env variables</tt>
-<br><tt>Site.cshrc&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-c shell script to set path and env variables</tt>
-<br><tt>borland.bat&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; WIN32
-bat file to set path and env variables</tt>
-<br><tt>win32.bat&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-WIN32 bat file to set path and env variables</tt>
-<br>&nbsp;
-<li>
-base/configure&nbsp; directory - contains build definitions and rules</li>
-
-<br><tt>CONFIG.CrossCommon&nbsp;&nbsp;&nbsp; Cross build definitions</tt>
-<br><tt>CONFIG.gnuCommon&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gnu compiler build
-definitions for all archs</tt>
-<br><tt>CONFIG_ADDONS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Definitions
-for &lt;osclass> and DEFAULT options</tt>
-<br><tt>CONFIG_BASE&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-EPICS base tool and location definitions</tt>
-<br><tt>CONFIG_BASE_VERSION&nbsp;&nbsp; Definitions for EPICS base version
-number</tt>
-<br><tt>CONFIG_COMMON&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Definitions
-common to all builds</tt>
-<br><tt>CONFIG_ENV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Definitions of EPICS environment variables</tt>
-<br><tt>CONFIG_SITE&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Site specific make defintions</tt>
-<br><tt>CONFIG_SITE_ENV&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Site defaults
-for EPICS environment variables</tt>
-<br><tt>CONFIG&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Includes configure files and allows variable overrides</tt>
-<br><tt>RELEASE&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Location of external products such as Tornado II</tt>
-<br><tt>RULES&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Includes appropriate rules file</tt>
-<br><tt>RULES.Db&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Rules for database and database definition files</tt>
-<br><tt>RULES_ARCHS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Definitions and rules for building architectures</tt>
-<br><tt>RULES_BUILD&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Build and install rules and definitions</tt>
-<br><tt>RULES_DIRS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Definitions and rules for building subdirectories</tt>
-<br><tt>RULES_JAVA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Definitions and rules for java jars and classes</tt>
-<br><tt>RULES_TOP&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Rules specific to a &lt;top> dir (uninstall and tar)</tt>
-<br><tt>Sample.Makefile&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Sample makefile
-with comments</tt>
-<br>&nbsp;
-<li>
-base/configure/os directory - contains os-arch specific definitions</li>
-
-<br><tt>CONFIG.&lt;host>.&lt;target>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Specific
-host-target build definitions</tt>
-<br><tt>CONFIG.Common.&lt;target>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Specific
-target definitions for all hosts</tt>
-<br><tt>CONFIG.&lt;host>.Common&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Specific host definitions for all targets</tt>
-<br><tt>CONFIG.UnixCommon.Common&nbsp;&nbsp;&nbsp; Definitions for Unix
-hosts and all target</tt>
-<br><tt>CONFIG.&lt;host>.vxWorksCommon Specific host definitions for all
-vx targets</tt>
-<br><tt>CONFIG_COMPAT&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-R3.13 arch compatibility definitions</tt>
-<br><tt>CONFIG_SITE.&lt;host>.&lt;target> Site specific host-target definitions</tt>
-<br><tt>CONFIG_SITE.Common.&lt;target> Site specific target defs for all
-hosts</tt>
-<br><tt>CONFIG_SITE.&lt;host>.Common&nbsp;&nbsp; Site specific host defs
-for all targets</tt>
-<br>&nbsp;
-<li>
-base/configure/tools directory - contains Perl scripts used for the build</li>
-
-<br><tt>MakeReleae&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Unix shell script to create a release tar file</tt>
-<br><tt>convertRelease.pl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Performs
-consistancy checks on RELEASE files</tt>
-<br><tt>cp.pl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-This Perl script copies an existing file</tt>
-<br><tt>installEpics.pl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Installs built files into install directories.</tt>
-<br><tt>makeDependsTargets.pl&nbsp;&nbsp; Creates targets of include dependency
-files</tt>
-<br><tt>makeMakefile.pl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Creates a Makefile in O.&lt;arch> dirs</tt>
-<br><tt>makeMakefileInclude.pl&nbsp; Creates file to be included by Makefile</tt>
-<br><tt>mkdir.pl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Creates a directory (like Unix mkdir)</tt>
-<br><tt>mkmf.pl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Generates dependencies from include stmnts</tt>
-<br><tt>munch.pl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Creates a ctdt.c file for vxWorks targets</tt>
-<br><tt>mv.pl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Renames an existing file.</tt>
-<br><tt>replaceVAR.pl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Changes CapFast VAR(xxx) to $(xxx) notation</tt>
-<br><tt>rm.pl&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-Quietly removes an existing file.</tt></blockquote>
-
-<h3>
-Building EPICS base (Unix and Win32)</h3>
-
-<blockquote><b>Unpack file</b>
-<blockquote>Unzip and untar the distribution file. Use WinZip on Windows
-systems.</blockquote>
-S<b>et environment variables</b>
-<blockquote>Files in the base/startup directory have been provided to help
-set required path and other environment variables .
-<p><b>EPICS_HOST_ARCH</b>
-<br>Before you can build or use EPICS R3.14, the environment variable EPICS_HOST_ARCH
-must be defined. A perl script EpicsHostArch.pl in the base/startup directory
-has been provided to help set EPICS_HOST_ARCH. You should have EPICS_HOST_ARCH
-set to your host operating system followed by a dash and then your host
-architecture, e.g. solaris-sparc. If you are not using the OS vendor's
-c/c++ compiler for host
-<br>builds, you will need another dash followed by the alternate compiler
-name (e.g. "-gnu" for GNU c/c++ compilers on a solaris host or "-borland"
-for Borland c/c++ compilers on a WIN32 host) .&nbsp; See configure/CONFIG_SITE
-for a list of supported EPICS_HOST_ARCH values.
-<p><b>PERLLIB</b>
-<br>On WIN32, some versions of Perl require that&nbsp; the environment
-variable PERLLIB be set to &lt;perl directory location>.</blockquote>
-
-<blockquote><b>PATH</b>
-<br>As already mentioned, you must have the perl executable and you may
-need C and C++ compilers in your search path. For building base you also
-must have echo in your search path. For Unix host builds you also need
-touch, cpp, cp, rm, mv, and mkdir in your search path and /bin/chmod must
-exist. On some Unix systems you may also need ar and ranlib in your path,
-and the c compiler may require ld in your path.
-<p><b>LD_LIBRARY_PATH</b>
-<br>If you plan to build EPICS base shared libraries instead of archive
-libraries, on Unix systems you will need to add&nbsp; fullpathname to $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH)
-to your LD_LIBRARY_PATH environment variable.
-<p><b>PATH</b>
-<br>On WIN32 systems, building shared libraries is the default setting
-and you will need to add&nbsp; fullpathname to $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH)
-to your path. Building shared libraries is determined by the value of the
-macro SHARED_LIBRARIES in CONFIG_SITE (either YES or NO).
-<br>&nbsp;</blockquote>
-<b>Do site-specific build configuration</b>
-<blockquote><b>Site configuration</b>
-<br>To configure EPICS, you may want to modify the default definitions
-in the following files:
-<blockquote><tt>configure/CONFIG_SITE&nbsp;&nbsp;&nbsp;&nbsp; </tt>Build
-choices. Specify target archs.
-<br><tt>configure/CONFIG_SITE_ENV </tt>Environment variable&nbsp; defaults
-<br><tt>configure/RELEASE&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </tt>TORNADO
-2 full path location</blockquote>
-<b>Host configuration</b>
-<br>To configure each host system, you may override the default definitions
-by adding a new file with override definitions into the configure/os directory.
-The new file should have the same name as the distribution file to be overridden
-except with CONFIG in the name changed to CONFIG_SITE.
-<blockquote><tt>configure/os/CONFIG.&lt;host>.&lt;host></tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-- Host build settings
-<br><tt>configure/os/CONFIG.&lt;host>.Common</tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-- Host cross build settings</blockquote>
-<b>Target configuration</b>
-<br>To configure each target system, you may override the default definitions
-by adding a new file with override definitions into the configure/os directory.
-The new file should have the same name as the distribution file to be overridden
-except with CONFIG in the name replaced by CONFIG_SITE.
-<blockquote><tt>configure/os/CONFIG.Common.&lt;target></tt>&nbsp;&nbsp;
-- Target cross settings
-<br><tt>configure/os/CONFIG.&lt;host>.&lt;target>&nbsp;</tt> - Host-target
-settings</blockquote>
-<b>R3.13 compatibility configuration</b>
-<br>To configure EPICS base for building with R3.13 extensions and ioc
-applications , you must modify the default definitions in the base/config/CONFIG_SITE*&nbsp;
-files to agree with definitions you made in base/configure and base/configure/os
-files.</blockquote>
-
-<h4>
-<b>Build EPICS base</b></h4>
-
-<blockquote>After configuring the build you should be able to build EPICS
-base by issuing the following commands in the distribution's root directory
-(base)
-<blockquote><tt>gnumake clean uninstall</tt>
-<br><tt>gnumake</tt></blockquote>
-The command "gnumake clean uninstall" will remove all files and directories
-generated by a previous build. The command "gnumake" will build and install
-everything for the configured host and targets.
-<br>It is recommended that you do a "gnumake clean uninstall" at the root
-directory of an EPICS&nbsp; directory structure before each complete rebuild
-to ensure that all components will be rebuilt.</blockquote>
-</blockquote>
-
-<h3>
-Multiple host platforms</h3>
-
-<blockquote>You can build using a single EPICS directory structure on multiple
-host systems and for multiple cross target systems. The intermediate and
-binary files generated by the build will be created in separate subdirectories
-and installed into the appropriate separate host/target install directories.
-EPICS executables and perl scripts are installed into the <tt>$(INSTALL_LOCATION)/bin/&lt;arch></tt>
-directories. Libraries are installed into $<tt><font size=+1>(INSTALL_LOCATION)/lib/&lt;arch></font></tt>.
-The default definition for <tt>$(INSTALL_LOCATION)</tt> is <tt>$(TOP)</tt>
-which is the root directory in the distribution directory structure, base.
-Created object files are stored in O.&lt;arch> source subdirectories, This
-allows objects for multiple cross target architectures to be maintained
-at the same time. To build EPICS base for a specific host/target combination
-you must have the proper host/target c/c++ cross compiler and target header
-files and the base/configure/os directory must have the appropriate configure
-files.</blockquote>
-
-<h3>
-Example application and extension</h3>
-
-<blockquote>A perl tool, makeBaseApp.pl is included in the distribution
-file. This script will create a sample application that can be built and
-then executed to try out this release of base. Also, a perl script, makeBaseExt.pl,
-is included in the distribution file. This script will create a sample
-extension that can be built and executed. The makeBaseApp.pl and makeBaseExt.pl
-scripts are installed into the install location bin/&lt;hostarch> directory
-during the base build.</blockquote>
-
-<blockquote>Instructions for building and executing the 3.14 example application
-can be found in the section "Example Application" of Chapter 2, "New Features
-for 3.14", in the&nbsp; "IOC Application Developer's Guide R3.14.0beta1".
-The "Example Application" section briefly explains how to create and build
-an example application in a user created &lt;top> directory. It also explains
-how to run the example application on a vxWorks ioc or a host system and
-run an example channel access client on the host system.</blockquote>
-
-</body>
-</html>

README.solaris

@@ -0,0 +1,25 @@
+----------------------------------------------------------------------------
+EPICS Notes for Solaris
+	- By Andrew Johnson
+
+updated 12-16-96 by Jeff Hill
+
+----------------------------------------------------------------------------
+
+Notes:
+
+1. In order to build EPICS under Solaris 2, you must ensure that the
+solaris directory /usr/ccs/bin is in your search path.
+
+2. It is now possible to compile EPICS under Solaris 2 using either the
+GNU gcc compiler or the Sun SPARCworks ANSI C compiler. The g++/
+Sun SPARCworks ANSI C compiler combination has compiled and linked
+without errors but has not been extensively tested.
+
+3. EPICS under Solaris 2 no longer uses the UCB compatability libraries.
+In order to ensure that the /usr/ucblib files are not inherited, you
+should ensure that your LD_LIBRARY_PATH environment variable does not
+include /usr/ucblib when you build any of the host tools.
+
+--
+anj@ast.cam.ac.uk

READMEbuildingR3.13AppsWithR3.14.html

@@ -1,298 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="ProgId" content="Word.Document">
-   <meta name="Generator" content="Microsoft Word 9">
-   <meta name="Originator" content="Microsoft Word 9">
-   <meta name="GENERATOR" content="Mozilla/4.77 [en] (X11; U; SunOS 5.8 sun4u) [Netscape]">
-   <title>Instruction on building existing R3</title>
-<link rel=File-List href="./READMEbuildingR3.13AppsWithR3.14_files/filelist.xml">
-<!--[if gte mso 9]><xml>
- <o:DocumentProperties>
-  <o:LastAuthor>Jba</o:LastAuthor>
-  <o:Revision>3</o:Revision>
-  <o:TotalTime>4</o:TotalTime>
-  <o:Created>2000-10-25T19:43:00Z</o:Created>
-  <o:LastSaved>2000-10-25T19:47:00Z</o:LastSaved>
-  <o:Pages>1</o:Pages>
-  <o:Company>Argonne National Laboratory</o:Company>
-  <o:Lines>1</o:Lines>
-  <o:Paragraphs>1</o:Paragraphs>
-  <o:Version>9.2720</o:Version>
- </o:DocumentProperties>
-</xml><![endif]-->
-<!--[if gte mso 9]><xml>
- <w:WordDocument>
-  <w:DisplayHorizontalDrawingGridEvery>0</w:DisplayHorizontalDrawingGridEvery>
-  <w:DisplayVerticalDrawingGridEvery>0</w:DisplayVerticalDrawingGridEvery>
-  <w:UseMarginsForDrawingGridOrigin/>
-  <w:Compatibility>
-   <w:FootnoteLayoutLikeWW8/>
-   <w:ShapeLayoutLikeWW8/>
-   <w:AlignTablesRowByRow/>
-   <w:ForgetLastTabAlignment/>
-   <w:LayoutRawTableWidth/>
-   <w:LayoutTableRowsApart/>
-  </w:Compatibility>
- </w:WordDocument>
-</xml><![endif]-->
-<style>
-<!--
- /* Font Definitions */
-@font-face
-	{font-family:"MS Mincho";
-	panose-1:2 2 6 9 4 2 5 8 3 4;
-	mso-font-alt:"\FF2D\FF33 \660E\671D";
-	mso-font-charset:128;
-	mso-generic-font-family:roman;
-	mso-font-pitch:fixed;
-	mso-font-signature:-1610612033 1757936891 16 0 131231 0;}
-@font-face
-	{font-family:"\@MS Mincho";
-	mso-font-charset:128;
-	mso-generic-font-family:roman;
-	mso-font-pitch:fixed;
-	mso-font-signature:1 134676480 16 0 131072 0;}
- /* Style Definitions */
-p.MsoNormal, li.MsoNormal, div.MsoNormal
-	{mso-style-parent:"";
-	margin:0in;
-	margin-bottom:.0001pt;
-	mso-pagination:widow-orphan;
-	font-size:10.0pt;
-	font-family:"Times New Roman";
-	mso-fareast-font-family:"Times New Roman";}
-p.MsoPlainText, li.MsoPlainText, div.MsoPlainText
-	{margin:0in;
-	margin-bottom:.0001pt;
-	mso-pagination:widow-orphan;
-	font-size:10.0pt;
-	font-family:"Courier New";
-	mso-fareast-font-family:"Times New Roman";}
-@page Section1
-	{size:8.5in 11.0in;
-	margin:1.0in 66.0pt 1.0in 66.0pt;
-	mso-header-margin:.5in;
-	mso-footer-margin:.5in;
-	mso-paper-source:0;}
-div.Section1
-	{page:Section1;}
--->
-</style>
-</head>
-<body lang="EN-US" style="tab-interval:.5in">
-
-<center>
-<h2>
-Building EPICS R3.13 applications with R3.14.0beta1 base</h2></center>
-
-<p><br>This document describes how to modify a R3.13 vxWorks application
-so that it builds with release R3.14.0beta1.&nbsp; It describes an easy
-way to modify applications subject to the following restrictions:
-<ul>
-<li>
-The application still uses config rules rather than the configure rules
-which are new to release 3.14.</li>
-
-<li>
-The OSI (Operating System Independent) features of R3.14 are not available,
-i.e. iocCore products can only be build for vxWorks.</li>
-
-<li>
-Once the application is changed to build with base R3.14, it will not build
-with earlier base releases.</li>
-</ul>
-Ultimately applications should be converted to use the new configure rules
-so that the OSI features are available.
-<h3>
-<b>Gnumake clean uninstall</b></h3>
-
-<blockquote>At the top of the application execute:
-<pre>"<tt>gnumake clean uninstall</tt>"</pre>
-to remove all files and directories created by earlier builds.</blockquote>
-
-<h3>
-Update RELEASE</h3>
-
-<blockquote>Change&nbsp; the <tt>EPICS_BASE</tt> definition to point to
-the R3.14 base release. All hardware support and some soft support is now
-unbundled. For example the sequencer is unbundled. You must obtain and
-build all required unbundled products before you can build the application.
-The location of each unbundled product must be specified in &lt;top>/config/RELEASE.</blockquote>
-
-<h3>
-Update target arch definitions</h3>
-
-<blockquote>Change any target arch specification in config/CONFIG to new
-R3.14 target arch specification. Look in the R3.14 base/bin directory to
-see the target arch names.
-<p>For example, in config/CONFIG change
-<pre>CROSS_COMPILER_TARGET_ARCHS = mv167</pre>
-to
-<pre>CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040</pre>
-In the iocBoot/*/Makefile files, change
-<pre>ARCH=&lt;old arch name></pre>
-to
-<pre>ARCH=&lt;new arch name></pre>
-and do a "<tt>gnumake"</tt> in the iocBoot directory to update the cdCommands
-files.</blockquote>
-
-<h3>
-State Notation Language changes</h3>
-
-<blockquote>snc is no longer in base. If snc is used in your application,
-you must download and build the seq module with baseR3.14.0beta1. See the
-Application Developer's Guide to see how to build sequence programs.</blockquote>
-
-<blockquote>Change
-<pre>INSTALLS=seq</pre>
-to
-<pre>LIBOBJS += $(SEQ_BIN)/seqLibrary.o</pre>
-
-<p><br>in application src/Makefile.Vx files to link seq library into your
-application library,.
-<br>Also add
-<pre>SEQ=&lt;full path to seq module directory></pre>
-to config/RELEASE.
-<br>Also remove
-<pre>ld &lt; seq</pre>
-from the st.cmd files in the iocBoot subdirectories.</blockquote>
-
-<h3>
-iocCore changes</h3>
-
-<blockquote>iocCore has been renamed to iocCoreLibrary.o.
-<br>Change
-<pre>INSTALLS=iocCore</pre>
-to
-<pre>LIBOBJS += $(EPICS_BASE_BIN)/iocCoreLibrary.o</pre>
-in your application src/Makefile.Vx files .
-<br>Also remove
-<pre>ld &lt; iocCore</pre>
-from the st.cmd files in the iocBoot subdirectories.</blockquote>
-
-<h3>
-Library db changes</h3>
-
-<blockquote>The Db library name was changed to dbStaticHost for host builds
-and dbStaticIoc for ioc builds.
-<br>Change
-<pre>PROD_LIBS+=Db</pre>
-to
-<pre>PROD_LIBS+=dbStaticHost</pre>
-and
-<pre>Db_DIR=$(EPICS_BASE_LIB)</pre>
-to
-<pre>dbStaticHost_DIR=$(EPICS_BASE_LIB)</pre>
-in your application src/Makefile.Host files.</blockquote>
-
-<h3>
-VxWorks C++ munched libraries and object files</h3>
-
-<blockquote>Since R3.14 contains C++ code, the build rules were changed
-to create a corresponding munched file for every vx object file built.
-The objects files can be combined to form libraries but the munched files
-must be loaded into vxWorks. In all st.cmd files add the suffix "<tt>.munch</tt>"
-to the ld lines where object files were previously loaded. For example
-change
-<pre>ld &lt; exampleLib</pre>
-to
-<pre>ld &lt; exampleLibrary.munch</pre>
-</blockquote>
-
-<h3>
-recGbl calls</h3>
-
-<blockquote>You may need to add the line&nbsp; "<tt>#include "recGbl.h</tt>"
-to any source files that have recGbl* calls so that the file will compile
-without errors.</blockquote>
-
-<h3>
-Record support changes</h3>
-
-<blockquote>The steppermotor, scan, and pid records are no longer in base.
-If your application does not use these record types, comment out or remove
-references to them in base.dbd and baseLIBOBJS. If these record types are
-used by your application you must download and build the modules with R3.14
-base, add appropriate module definitions to your application's config/RELEASE
-fileand change the <tt>LIBOBJS</tt> definitions. For example
-<br>add
-<pre>PID=&lt;full path to modules directory>/pid</pre>
-to config/RELEASE.
-<br>Remove
-<pre>LIBOBJS += $(EPICS_BASE_BIN)/pidRecord.o</pre>
-from baseLIBOBJS,
-<br>and add
-<pre>LIBOBJS += $(PID_BIN)/pidRecord.o</pre>
-to your application src/Makefile.
-<p>You should consider changing any existing old steppermotor records to
-the new EPICS&nbsp; <a href="http://www.aps.anl.gov/upd/people/sluiter/epics/modules/mechanism/motor/index.html">motor
-record</a>&nbsp; module supported by Beamline Controls and Data Acquisition
-at APS.</blockquote>
-
-<h3>
-RecDynLink.o and devPtSoft changes</h3>
-
-<blockquote>recDynLink.o and devPtSoft.o are no longer in base. Remove
-references to them in base.dbd and baseLIBOBJS if they are not used in
-application.</blockquote>
-
-<h3>
-Hardware support changes</h3>
-
-<blockquote>All hardware support (dev, drv and dbd files) has been unbundled
-from base R3.14. This support includes the files <tt>symb, symb.dbd, drvHp1404a.o,
-drvEpvxiMsg.o, and drvEpvxi.o</tt>.&nbsp; If they are not used in your
-application, comment out references to these files in base.dbd and baseLIBOBJS.
-<p>Hardware support files now exist as separate modules available for download
-from the <a href="http://www.aps.anl.gov/epics/">EPICS www home page at
-ANL</a>. You must now download all the hardware support modules needed
-for your application, build the modules with R3.14 base,&nbsp; add the
-appropriate module full path definitions to your application config/RELEASE
-file, and change <tt>LIBOBJS</tt> location definition <tt>$(EPICS_BASE_BIN)</tt>
-to the module definition bin directory in your application src directory
-files.
-<p>For example, remove
-<pre>LIBOBJS+=$(EPICS_BASE_BIN)/symb</pre>
-from baseLIBOBJS and add
-<pre>LIBOBJS+=$(SYMB_BIN)/symb</pre>
-to your application src/Makefile,
-<br>and add the line
-<pre>SYMB=&lt;full path definition for the built module SYMB></pre>
-into your application config/RELEASE file .
-<p>After a gnumake in the symb module followed by a gnumake in the application
-config directory, the definitions <tt>SYMB_BIN</tt> and <tt>SYMB_LIB</tt>
-will be created,&nbsp; the directory $(SYMB)/include will be added to the
-include directories on the compiler command lines&nbsp; (in the <tt>INSTALL_INCLUDES</tt>
-definition)&nbsp; and the directory $(SYMB)/dbd will be added to the dbd
-search directories on the dbExpand command lines (in the <tt>INSTALL_DBDFLAGS</tt>
-definition).</blockquote>
-
-<h3>
-dbLoadtemplate tool changes</h3>
-
-<blockquote>The host tool dbLoadTemplate has been replaced by a new extension,
-msi. dbLoadTemplate is still supported on iocs. Build the msi extension
-with base R3.14 and change the following definitions in your application
-files.
-<p>In config/RULES.Db replace the line
-<pre>DBLOADTEMPLATE=$(EPICS_BASE_HOST_BIN)/dbLoadTemplate$(EXE)</pre>
-with
-<pre>MSI = $(firstword $(wildcard $(EPICS_EXTENSIONS_HOST_BIN)/msi$(HOSTEXE) \
-&nbsp;&nbsp; (EPICS_EXTENSIONS)/bin/$(HOST_OS_CLASS)/msi$(HOSTEXE)) msi$(HOSTEXE))</pre>
-and change line:
-<pre>@$(DBLOADTEMPLATE) $&lt; > $@</pre>
-to
-<pre>@$(MSI) $&lt; > $@</pre>
-Also, if dbLoadTemplate was used by your application,&nbsp; add the definition
-<blockquote>
-<pre>EPICS_EXTENSIONS=&lt;full path name to epics extensions directory></pre>
-</blockquote>
-to your application config/RELEASE file.</blockquote>
-depends changes
-<p>&nbsp;&nbsp;&nbsp;&nbsp; Remove any SRCS.c and SRCS.cc definitions in
-your application src/Makefile..*files. The depends rule no longer uses
-these definitions.
-</body>
-</html>

READMEbuildingR3.13ExtensionsWithR3.14.html

@@ -1,132 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="Author" content="jba">
-   <meta name="GENERATOR" content="Mozilla/4.76 [en] (X11; U; SunOS 5.8 sun4u) [Netscape]">
-</head>
-<body>
-
-<center>
-<h2>
-Building EPICS R3.13 extensions with R3.14 base</h2></center>
-
-<p><br>EPICS R3.13 extensions have both a Makefile and a Makefile.Host
-in the build directories and the EPICS R3.13 extension tree has an extensions/config
-directory.
-<h3>
-Preliminary steps for all extensions</h3>
-
-<blockquote>
-<li>
-Download the latest version (10/25/00) of the extensions/config files,
-extensionsConfig.tar.gz,&nbsp; from the APS EPICS www page.</li>
-
-<li>
-Make certain that you have set the HOST_ARCH environment variable.</li>
-
-<li>
-Set EPICS_BASE in extensions/config/RELEASE to the full path location of
-a built R3.14 base.</li>
-
-<li>
-BASE_3_14 is now defined in the base/config/CONFIG_BASE_VERSION.&nbsp;
-The commented BASE_3_14 definition can be removed from extensions/config/RELEASE.</li>
-</blockquote>
-
-<h3>
-Building downloaded APS distribution extensions with base R3.14</h3>
-
-<blockquote>
-<li>
-Download the latest version (10/25/00) of extensions distributed from the
-APS EPICS www page. The latest versions of the extensions should build
-with both R3.13 and R3.14. Note that the order of building extensions is
-important, i.e. some extensions depend on other extensions being built
-first. The extensions/config/CONFIG_EXTENSIONS file contains notes on extension
-dependancies and contains a definition of DIRS (used by extensions/src/Makefile)
-with the proper order for building the APS distributed extensions.</li>
-
-<li>
-Executing gnumake at the root level of the extensions tree or in the src
-directory should build the APS extensions in the proper order.</li>
-</blockquote>
-
-<h3>
-Building your extensions with base R3.14</h3>
-
-<blockquote>
-<li>
-<b>Library Db renamed</b></li>
-
-<br>Library Db has been renamed to dbStaticHost in EPICS base R3.14. In
-some extensions lib Db is not used and Db can be removed from the USR_LIBS
-(or PROD_LIBS) line. If the library is needed ( you get unresolved items
-after removing Db), the following lines should be added to Makefile.Host.
-<blockquote><tt>ifdef BASE_3_14</tt>
-<br><tt>USR_LIBS += dbStaticHost</tt>
-<br><tt>dbStaticHost_DIR = $(EPICS_BASE_LIB)</tt>
-<br><tt>else</tt>
-<br><tt>USR_LIBS += Db</tt>
-<br><tt>Db_DIR = $(EPICS_BASE_LIB)</tt>
-<br><tt>endif</tt></blockquote>
-
-<li>
-<b>Target architecture specifications changed</b></li>
-
-<br>Since target architecture specifications have been changed (solaris
-to solaris-sparc, win32 to win32-x86, ...) Makefile.Host references to
-and tests on T_A have to be changed.&nbsp; In most cases T_A can be replaced
-by OS_CLASS.&nbsp; Since HOST_ARCH will eventually be phased out, it would
-be a good idea to change any Makefile.Host references to HOST_ARCH to OS_CLASS
-if possible.
-<br>For example change
-<blockquote><tt>ifeq ($(T_A),solaris)</tt>
-<br><tt>RPCFLAGS = -K -1</tt>
-<br><tt>endif</tt></blockquote>
-to
-<blockquote><tt>ifeq ($(OS_CLASS),solaris)</tt>
-<br><tt>RPCFLAGS = -K -1</tt>
-<br><tt>endif</tt></blockquote>
-
-<li>
-<b>New ca_set_puser</b></li>
-
-<br>Statements of the form: <tt>ca_puser(chid) = xyz</tt>; should to be
-changed to:&nbsp; <tt>ca_set_puser(chid,xyz)</tt>;
-<br>&nbsp;
-<li>
-<b>Extern C around includes</b></li>
-
-<br>Remove any extern "C" braces around #includes of EPICS base header
-files.
-<br>For example change
-<blockquote><tt>extern "C" {</tt>
-<br><tt>#include "cadefs.h"</tt>
-<br><tt>} /* end extern C */</tt></blockquote>
-to
-<blockquote><tt>#include "cadefs.h"</tt></blockquote>
-
-<li>
-<b>Infrequently used R3.13 timestamp functions unbundled from base</b></li>
-
-<br>Some infrequently used R3.13 timestamp functions and macro definitions
-have been removed from EPICS base and now exist in a library, ts, created
-and installed in the ar extension.&nbsp; The only ANL distributed extension
-that uses these unbundled functions and macros&nbsp; is cau. The two R3.13
-functions tsStampToText and tsLocalTime along with the definitions TS_TEXT_MONDDYYYY
-and TS_TEXT_MMDDYY have been retained in R3.14 for extension compatibility
-purposes.
-<br>If your extension gets undefines for TS_* usage and ts* function calls
-when built with R3.14, you must obtain and build the ar extension. Add
-an #include for tsSubr.h to your extension source code and add library
-ts to PROD_LIBS or USR_LIBS in your Makefile.Host as follows:
-<blockquote><tt>#include "tsSubr.h"</tt>
-<p><tt>ifdef BASE_3_14</tt>
-<br><tt>PROD_LIBS += ts</tt>
-<br><tt>ts_DIR = $(EPICS_EXTENSIONS_LIB)</tt>
-<br><tt>endif</tt></blockquote>
-</blockquote>
-
-</body>
-</html>

READMEconvertingR3.13AppsToR3.14.html

@@ -1,302 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="Author" content="jba">
-   <meta name="GENERATOR" content="Mozilla/4.76 [en] (X11; U; SunOS 5.8 sun4u) [Netscape]">
-</head>
-<body>
-
-<center>
-<h2>
-Converting an EPICS R3.13 application to R3.14.0alpha3</h2></center>
-
-<p><br>This document describes how to convert a R3.13 vxWorks application
-so that it builds with release R3.14.0alpha3.&nbsp; It describes procedures
-such that:
-<ul>
-<li>
-The application uses the configure rules which are new to R3.14.</li>
-</ul>
-
-<ul>
-<li>
-The OSI (Operating System Independent) features of R3.14 are available,
-i.e. iocCore products can be build for vxWorks as well as other platforms,
-e.g. solaris and linux.</li>
-</ul>
-
-<h3>
-Gnumake clean uninstall</h3>
-
-<blockquote>First do a gnumake clean uninstall in the application's root
-directory to remove all files created by earlier builds.</blockquote>
-
-<h3>
-Create a new R3.14 application</h3>
-
-<blockquote><tt>mkdir &lt;top></tt>
-<br><tt>cd &lt;top></tt>
-<br><tt>&lt;full path to R3.14.0alpha3 base>/bin/&lt;host_arch>/makeBaseApp.pl
--t example example</tt></blockquote>
-
-<h3>
-Copy all *App and iocBoot directories and files to the new &lt;top> directory</h3>
-
-<blockquote><tt>cd &lt;oldtop></tt>
-<br><tt>find *App iocBoot -print | cpio -pvmd &lt;fullpath name to new
-top></tt></blockquote>
-
-<h3>
-Modify &lt;top>/configure/RELEASE</h3>
-
-<blockquote>Copy definitions of external modules excluding EPICS_BASE and
-TEMPLATES_TOP from old application RELEASE file.
-<br>If sequence programs (*.st or *.stt files) exist in your application,
-add the SNCSEQ location definition for the R3.14 seq external module
-<blockquote><tt>SNCSEQ =&lt;full path to seq module top></tt></blockquote>
-The R3.14 seq module must exist and be built with EPICS base R3.14.0alpha3.</blockquote>
-
-<h3>
-Modify the Makefiles in &lt;top>/*App directories.</h3>
-
-<blockquote>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/config/CONFIG_APP</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/CONFIG</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; i<tt>nclude $(TOP)/config/RULES_DIRS</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/RULES_DIRS</tt></blockquote>
-
-<h3>
-Modify the Makefiles in &lt;top>/*App/*Db directories.</h3>
-
-<blockquote>Remove existing Makefile
-<br>Rename Makefile.Host to Makefile
-<br>Modify Makefile as follows:
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>TOP=../../..</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>TOP=../..</tt>
-<p>Change&nbsp;&nbsp;&nbsp; i<tt>nclude $(TOP)/config/CONFIG_APP</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/CONFIG</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/config/RULES.Db</tt>
-<br>to <tt>include $(TOP)/configure/RULES</tt>
-<p>Place all definitions between the include lines.
-<p>Place any rules after the last include line.</blockquote>
-
-<h3>
-Modify the Makefiles in &lt;top>/*App/src directories.</h3>
-
-<blockquote>Remove existing Makefile
-<br>Rename Makefile.Host to Makefile
-<br>Modify Makefile as follows:
-<p>Change <tt>TOP=../../..</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>TOP=../..</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/config/CONFIG_APP</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/CONFIG</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; i<tt>nclude $(TOP)/config/RULES.Host</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/RULES</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>PROD_LIBS = &lt;name></tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp;<tt> &lt;prod name>_LIBS = dbStaticHost</tt>
-<br>where&nbsp; <tt>&lt;prod name></tt> is a specifified product to be
-built.
-<p>Change&nbsp; library name <tt>Db</tt> to <tt>dbStaticHost.</tt>
-<br>Change<tt> PROD_LIBS = Db</tt>
-<br>to&nbsp;<tt> &lt;prodname>_LIBS += dbStaticHost</tt>
-<br>and <tt>Db_DIR = $(EPICS_BASE_LIB)</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>dbStaticHost_DIR = $(EPICS_BASE_LIB)</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>USER_DBDFLAGS</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>USR_DBDFLAGS</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>RECTYPES +=&nbsp; xxxRecord.h</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>DBDINC += xxxRecord</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>DBDNAME = &lt;name>App.dbd</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>DBD += &lt;name>.dbd</tt>
-<p>Remove all <tt>DBDEXPAND</tt>&nbsp; lines.
-<p>Change&nbsp; <tt>PROD = &lt;prodname></tt>
-<br>to <tt>PROD_HOST = &lt;prodname></tt>
-<p>Change&nbsp; <tt>SRCS.c += &lt;name></tt>
-<br>to <tt>&lt;prodname>_SRCS += &lt;name></tt>
-<br>or<tt> &lt;libname>_SRCS += &lt;name></tt>
-<p>Add the contents of Makefile.Vx to Makefile removing the include lines
-and the TOP definition.</blockquote>
-
-<blockquote>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>LIBNAME = &lt;libname>Lib</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>PROD_vxWorks = &lt;libname></tt><tt></tt>
-<p>Remove line&nbsp;<tt> -include ../baseLIBOBJS</tt>
-<p>Remove&nbsp; line&nbsp;&nbsp;&nbsp; <tt>INSTALLS = iocCore seq</tt><tt></tt>
-<p>Change all <tt>SRCS.c += ../&lt;name>.c </tt>lines
-<br>to&nbsp;&nbsp; <font face="Arial,Helvetica">&lt;prodname>_SRCS += &lt;name>.c</font>
-<br>if the source files exist in the current directory.<tt></tt>
-<p>Change all <tt>*OBJS += &lt;name>.o</tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-lines
-<br>to&nbsp;&nbsp; <font face="Arial,Helvetica">&lt;prodname>_SRCS += &lt;name>.c</font>
-<br>or&nbsp;<font face="Arial,Helvetica"> &lt;prodname>_SRCS += &lt;name>.cc</font>
-<br>if the c/c++ source files exist in the current directory.
-<p>Change&nbsp;&nbsp;&nbsp; <tt>LIBOBJS += &lt;seq_program_name>.o</tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-lines
-<br>to&nbsp;&nbsp; <tt>&lt;prodname>_SRCS += &lt;seq_program_name>.stt</tt>
-<br>or&nbsp; <tt>&lt;prodname>_SRCS += &lt;seq_program_name>.st</tt><tt></tt>
-<p>Add the lines
-<blockquote><tt>#&lt;name>_LIBS += seq</tt>
-<br><tt>#&lt;name>_LIBS += pv</tt>
-<br><tt>#seq_DIR&nbsp;&nbsp;&nbsp; = $(SNCSEQ_LIB)</tt>
-<br><tt>#pv_DIR&nbsp;&nbsp;&nbsp;&nbsp; = $(SNCSEQ_LIB)</tt><tt></tt>
-<p><tt>&lt;name>_LIBS += recIoc</tt>
-<br><tt>&lt;name>_LIBS += softDevIoc</tt>
-<br><tt>&lt;name>_LIBS += testDevIoc</tt>
-<br><tt>&lt;name>_LIBS += iocsh</tt>
-<br><tt>&lt;name>_LIBS += miscIoc</tt>
-<br><tt>&lt;name>_LIBS += rsrvIoc</tt>
-<br><tt>&lt;name>_LIBS += dbtoolsIoc</tt>
-<br><tt>&lt;name>_LIBS += asIoc</tt>
-<br><tt>&lt;name>_LIBS += dbIoc</tt>
-<br><tt>&lt;name>_LIBS += registryIoc</tt>
-<br><tt>&lt;name>_LIBS += dbStaticIoc</tt>
-<br><tt>&lt;name>_LIBS += ca</tt>
-<br><tt>&lt;name>_LIBS += Com</tt></blockquote>
-where <tt>&lt;name></tt> is the&nbsp; name in the <tt>PROD_vxWorks</tt>
-definition, and uncomment the first four lines if you have sequence programs
-(.st or .stt files) in the current directory.
-<p>Place all macro definitions between the include lines.
-<p>Place any rules after the last include line.</blockquote>
-
-<h3>
-Modify the Makefiles in &lt;top>/iocBoot directory.</h3>
-
-<blockquote>Change i<tt>nclude $(TOP)/config/CONFIG_APP</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/CONFIG</tt>
-<p>Remove the line <tt>DIRS += $(wildcard *ioc*)</tt>
-<p>Change <tt>include $(TOP)/config/RULES.iocBoot</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; i<tt>nclude $(TOP)/configure/RULES.iocBoot</tt></blockquote>
-
-<h3>
-Modify the Makefiles in &lt;top>/iocBoot/ioc* directories.</h3>
-
-<blockquote>Change <tt>include $(TOP)/config/CONFIG_APP</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/CONFIG</tt>
-<p>Change <tt>include ARCH = &lt;old arch specification e.g. mv167></tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include ARCH = &lt;new arch specificatio
-e.g. vxWorks-68040></tt><tt></tt>
-<p>Change <tt>include $(TOP)/config/RULES.ioc</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/RULES.ioc</tt>
-<p>Add the following rule at the end of the Makefile.
-<blockquote><tt>buildInstall: cdCommands</tt></blockquote>
-</blockquote>
-
-<h3>
-Modify st.cmd in &lt;top>/iocBoot/ioc* directories.</h3>
-
-<blockquote>Remove the lines</blockquote>
-
-<blockquote>
-<blockquote>
-<pre>ld &lt; seq</pre>
-
-<pre>ld &lt; iocCore</pre>
-</blockquote>
-Change&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>ld &lt; &lt;libname>Lib</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>ld &lt; &lt;libname>.munch</tt>
-<p>Change&nbsp; load statements&nbsp; for db and dbd files from
-<blockquote><tt>cd startup</tt>
-<br><tt>dbLoadDatabase("../../dbd/exampleApp.dbd")</tt>
-<br><tt>dbLoadRecords("../../db/dbExample1.db","user=jba")</tt>
-<br><tt>dbLoadRecords("../../db/dbExample2.db")</tt></blockquote>
-to
-<blockquote><tt>cd top</tt>
-<br><tt>dbLoadDatabase("dbd/example.dbd")</tt>
-<br><tt>registerRecordDeviceDriver(pdbbase)</tt>
-<br><tt>dbLoadRecords("db/dbExample1.db","user=jba")</tt>
-<br><tt>dbLoadRecords("db/dbExample2.db")</tt></blockquote>
-</blockquote>
-
-<h3>
-Record support changes</h3>
-
-<blockquote>The steppermotor, scan, and pid records are no longer in base.&nbsp;
-If these records are not used in your application, comment out references
-to them in base.dbd. If these record types are used at your site, they&nbsp;
-should be downloaded and built with base R3.14 by your EPICS administrator.
-To update the R3.14 location of these record types in your application
-you must&nbsp; add appropriate module definitions to your application's
-config/RELEASE file and change the <tt>LIBOBJS</tt> definitions.
-<p>For example add</blockquote>
-
-<blockquote>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>PID=&lt;full
-path to modules directory>/pid</tt>
-<p>to config/RELEASE.
-<br>Remove</blockquote>
-
-<blockquote>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>LIBOBJS
-+= $(EPICS_BASE_BIN)/pidRecord.o</tt>
-<p>from baseLIBOBJS, and add</blockquote>
-
-<blockquote>
-<blockquote><tt>LIBOBJS += $(PID_BIN)/pidRecord.o</tt></blockquote>
-to your application src/Makefile.</blockquote>
-
-<blockquote>You should consider changing any existing old steppermotor
-records to the new EPICS&nbsp; motor record&nbsp; module supported by Beamline
-Controls and Data Acquisition at APS.</blockquote>
-
-<h3>
-RecDynLink.o and devPtSoft changes</h3>
-
-<blockquote>recDynLink.o and devPtSoft.o are no longer in EPICS base and
-now exist as separate EPICS modules.You must now add the appropriate module
-full path definitions to your application config/RELEASE file, and change
-<tt>LIBOBJS</tt>
-location definition <tt>$(EPICS_BASE_BIN)</tt> to the module definition
-bin directory in your application src directory files.&nbsp; See "Hardware
-support changes" below for instructions.</blockquote>
-
-<h3>
-Hardware support changes</h3>
-
-<blockquote>All hardware support (dev, drv and dbd files) except soft support
-has been unbundled from base R3.14. This support includes the files symb.dbd,
-drvHp1404a.o, drvEpvxiMsg.o, and drvEpvxi.o. If these are not used by your
-application, comment out references to them in base.dbd.</blockquote>
-
-<blockquote>Hardware support now exists as separate EPICS modules. The
-hardware support for your site should be downloaded and built with base
-R3.14 by your EPICS administrator. You must now add the appropriate module
-full path definitions to your application config/RELEASE file, and change
-<tt>LIBOBJS</tt>
-location from <tt>$(EPICS_BASE_BIN) </tt>to the module&nbsp; bin directory
-in your application src directory files.
-<p>For example, remove</blockquote>
-
-<blockquote>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>LIBOBJS+=$(EPICS_BASE_BIN)/symb</tt></blockquote>
-
-<blockquote>from baseLIBOBJS and add</blockquote>
-
-<blockquote>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>LIBOBJS+=$(SYMB_BIN)/symb</tt></blockquote>
-
-<blockquote>to your application src/Makefile,
-<br>and add the line</blockquote>
-
-<blockquote>
-<blockquote><tt>SYMB=&lt;full path definition for the built module SYMB></tt></blockquote>
-</blockquote>
-
-<blockquote>into your application config/RELEASE file .</blockquote>
-
-<h3>
-dbLoadtemplate tool changes</h3>
-
-<blockquote>The host tool dbLoadTemplate has been replace by a new EPICS
-extension, msi, which should be downloaded and built with base R3.14 by
-your EPICS administrator. dbLoadTemplate is still supported on iocs.&nbsp;
-If, in your application, db files are created from template and substitution
-files you should&nbsp; add the definition
-<p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>EPICS_EXTENSIONS=&lt;full
-path name to epics extensions directory></tt>
-<p>to your application config/RELEASE file.</blockquote>
-
-<blockquote>
-<blockquote>&nbsp;</blockquote>
-
-<blockquote>
-<pre></pre>
-</blockquote>
-</blockquote>
-
-<br>&nbsp;
-</body>
-</html>

READMEconvertingR3.14.0alpha2AppsTobeta1.html

@@ -1,145 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="Author" content="jba">
-   <meta name="GENERATOR" content="Mozilla/4.77 [en] (X11; U; SunOS 5.8 sun4u) [Netscape]">
-</head>
-<body>
-
-<center>
-<h2>
-Converting an EPICS R3.14.0 alpha2 application to beta1</h2></center>
-
-<p><br>This document describes how to convert a R3.14.0alpha2 application
-so that it builds with release R3.14.0beta1.
-<h3>
-Gnumake clean uninstall</h3>
-
-<blockquote>First do a "<tt>gnumake clean uninstall"</tt> in the application's
-root directory to remove all files created by earlier builds.</blockquote>
-
-<h3>
-Replace configure/RULES.ioc and configure/Makefile</h3>
-
-<blockquote>The rules defined in RULES.ioc have changed slightly, and new
-applications are now given a wrapper version which just includes $(EPICS_BASE)/configureRULES.ioc.
-The new configure/Makefile contains an additional macro that causes the
-contents of the configure/RELEASE file to be checked at build time for
-consistency with all the support applications that it references. These
-files should be replaced with copies of the new versions from &lt;base>/templates/makeBaseApp/top/configure</blockquote>
-
-<h3>
-Remove baseLIBOBJS</h3>
-
-<blockquote>Record and device support from base now exists in archive libraries
-so baseLIBOBJS is no longer needed and the file and references to it in
-the Makefile can be deleted. e.g. remove
-<blockquote><tt>-include ../baseLIBOBJS</tt></blockquote>
-and the file baseLIBOBJS. If there are no LIBOBJS definitions in the Makefile,
-also remove
-<blockquote><tt>example_OBJS += $(LIBOBJS)</tt></blockquote>
-</blockquote>
-
-<h3>
-Libraries recIoc, softDevIoc, and testDevIoc</h3>
-
-<blockquote>Add the new record and dev support libraries to &lt;name>App/src/Makefile,
-i.e. add the lines
-<blockquote><tt>example_LIBS += recIoc</tt>
-<br><tt>example_LIBS += softDevIoc</tt>
-<br><tt>example_LIBS += testDevIoc</tt></blockquote>
-and remove any references to iocLibrary, e.g. remove the line
-<blockquote><tt>example_OBJS_vxWorks += $(EPICS_BASE_BIN)/iocCoreLibrary</tt></blockquote>
-The order of references to base libraries is important so place recIoc
-and softDevIoc&nbsp; before the the other base library references.
-<p>If you are building on a WIN32 host add the following lines instead:
-<blockquote><tt># Use win32 object libs for registered support</tt>
-<br><tt>example_LIBS_win32 += recIocObj</tt>
-<br><tt>example_LIBS_win32 += softDevIocObj</tt>
-<br><tt>example_LIBS_win32 += testDevIocObj</tt>
-<br><tt>example_LIBS_DEFAULT += recIoc</tt>
-<br><tt>example_LIBS_DEFAULT += softDevIoc</tt>
-<br><tt>example_LIBS_DEFAULT += testDevIoc</tt></blockquote>
-</blockquote>
-
-<h3>
-iocrf renamed to iocsh</h3>
-
-<blockquote>Change all references to ioccrf in your application src directories
-to iocsh e.g.
-<p>change <tt>#include "ioccrf.h"</tt>
-<br>to&nbsp; <tt>#include "iocsh.h"</tt>
-<p>change<tt> ioccrf(argv[1]);</tt>
-<br>to&nbsp;<tt> iocsh(argv[1]);</tt>
-<p>and change&nbsp;<tt> ioccrf(NULL);</tt>
-<br>to <tt>iocsh(NULL)</tt>;
-<p>in &lt;name>App/src/exampleMain.c.</blockquote>
-
-<h3>
-PROD changes</h3>
-
-<blockquote>PROD targets will now be built for all target architectures.
-If a product should be built only for host architectures change PROD to
-PROD_HOST .e.g.&nbsp; in your application src Makefiles
-<blockquote>change <tt>PROD += caExample</tt>
-<br>to&nbsp; <tt>PROD_HOST += caExample</tt>
-<br>and
-<br>change <tt>PROD = sncExample</tt>
-<br>to <tt>PROD_HOST += sncExample</tt></blockquote>
-</blockquote>
-<b>LIBRARY and PROD changes</b>
-<blockquote>The meaning of LIBRARY and PROD have now changed. For vxWorks,
-LIBRARY now means an archive library, OBJLIB is now a combined object file
-(only needed for R3.13 compatibility) and PROD is now a combined object
-file with library references resolved and will have a corresponding .munch
-file created. Thus, in your application src Makefiles,
-<blockquote>change <tt>LIBRARY_vxWorks = &lt;name></tt>
-<br>to <tt>PROD_vxWorks = &lt;name></tt>
-<br>or
-<br>remove the lines <tt>LIBRARY_vxWorks = &lt;name></tt>
-<br>and <tt>PROD_RTEMS = &lt;name></tt>
-<br>and change <tt>PROD = &lt;name></tt>
-<br>to <tt>PROD_IOC = &lt;name></tt>.</blockquote>
-In the iocBoot/ioc&lt;name>/st.cmd files,
-<blockquote>change <tt>ld &lt; &lt;name>Library.munch</tt>
-<br>to <tt>ld &lt; &lt;name>.munch</tt></blockquote>
-A SRCS definition is now required for every PROD&nbsp; and LIBRARY source
-file to determine correct header file dependancies. This is true even if
-there is only one source file for the PROD or LIBRARY . Thus, for the PROD
-caExample in your src Makefile, add&nbsp; the line
-<blockquote>&nbsp;caExample_SRCS += caExample.c</blockquote>
-</blockquote>
-
-<h3>
-registerRecordDeviceDriver changes</h3>
-
-<blockquote>The created file registerRecordDeviceDriver.cpp is now used
-for all target architectures. Thus in your application src Makefiles
-<blockquote>change <tt>example_SRCS_DEFAULT += example_registerRecordDeviceDriver.cpp</tt>
-<br>to&nbsp; <tt>example_SRCS += example_registerRecordDeviceDriver.cpp</tt>
-<br><tt></tt>&nbsp;</blockquote>
-</blockquote>
-
-<h3>
-RTEMS-specific pathname changes</h3>
-
-<blockquote>1. The RTEMS TFTP remote filesystem no longer ignores leading
-`../' components in path names.&nbsp; All st.cmd file lines with path names
-of the form <tt>dbLoadRecords("../../db/dbExample1.db","user=norume")</tt>
-<br>must be changed to
-<br><tt>dbLoadRecords("db/dbExample1.db","user=norume")</tt><tt></tt>
-<p>The makeBaseApp.pl script distributed with R3.14-beta1 creates st.cmd
-scripts with the proper path names.
-<p>2. The RTEMS TFTP remote filesystem supports a limited set of chdir
-operations.
-<br>All paths passed to chdir (or to the IOC shell `cd' command) must end
-in a `/'
-<br>character.</blockquote>
-
-<blockquote>
-<blockquote>&nbsp;</blockquote>
-</blockquote>
-
-</body>
-</html>

config.hkv2f.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.mk

@@ -1 +0,0 @@
-BUILD_ARCHS=sun4 mv167 mv147

config.mv147.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.mv167.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.sun4.mk

@@ -1,13 +0,0 @@
-BUILD_TYPE = Unix
-DIRS =	src/libCom \
-	src/db \
-	src/ca \
-	src/toolsComm/antelope \
-	src/toolsComm/flex \
-	src/as \
-	src/bld \
-	src/dct \
-	src/util \
-	src/sequencer \
-	src/dbtools \
-	rec

config/CONFIG

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #

config/CONFIG.Host.Borland

@@ -2,9 +2,6 @@
 #  This file is maintained by the EPICS community.
 #  Sites may override these definitions in CONFIG_SITE.Borland
  
-# 	Use std path variables from ms
-HOME = $(HOMEDRIVE)$(HOMEPATH)
-
 BORLAND_LIB = $(BORLAND)\\lib
 BORLAND_INC = $(BORLAND)\\include
 BORLAND_BIN = $(BORLAND)\\bin
@@ -236,7 +233,7 @@ USR_DEPLIBS = $(foreach lib,$(USR_LIBS),$(firstword $(wildcard $($(lib)_DIR)/$(l
 
 # by default the libraries used when linking the DLL are just
 # PROD_LIBS ans SYS_PROD_LIBS minus the DLL name
-DLL_LIBS = $(subst $(LIBRARY),, $(PROD_LIBS))
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS))
  
 #
 #	EPICS libs that we need to link the DLL with

config/CONFIG.Host.Linux

@@ -26,7 +26,7 @@ ACC_WARN_YES =  -Wall
 ACC_WARN_NO =  -w
 ACC_OPT_YES =  -O
 ACC_OPT_NO = -g
-ACC_SFLAGS_YES = -Bstatic
+ACC_SFLAGS_YES = -static
 ACC_SFLAGS_NO=
 ACC_SLIBS_YES =
 ACC_SLIBS_NO=
@@ -43,7 +43,7 @@ CCC_WARN_YES =  -Wall
 CCC_WARN_NO =
 CCC_OPT_YES =  -O
 CCC_OPT_NO = -g
-CCC_SFLAGS_YES = -Bstatic
+CCC_SFLAGS_YES = -static
 CCC_SFLAGS_NO=
 CCC_SLIBS_YES =
 CCC_SLIBS_NO=
@@ -59,8 +59,8 @@ G++_STRICT = $(G++)  -Wtraditional
 
 
 #ARCH_DEP_CFLAGS = -D_X86_ -Dlinux -D_USE_BSD
-ARCH_DEP_CFLAGS = -D_X86_ -Dlinux
-ARCH_DEP_LDFLAGS += -lpthread -lreadline -lcurses -lrt
+ARCH_DEP_CFLAGS = -D_X86_ -Dlinux -m32
+ARCH_DEP_LDFLAGS =
 
 #glibc FAQ
 #	"_GNU_SOURCE:  glibc does not make the GNU extensions available 

config/CONFIG.Host.LynxOS

@@ -1,56 +0,0 @@
-# CONFIG.Host.LynxOS
-#
-#  This file is maintained by the EPICS community.
-#  Sites may override these definitions in CONFIG_SITE.Host.LynxOS
- 
-ARCH_CLASS = LynxOS
-
-# Include definitions common to all Unix archs
-include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
-
-AR = ar -rc
-ARCMD = $(AR) $@
-RANLIB = ranlib -t
-
-
-
-# Configure OS vendor C compiler
-ACC_ANSI = $(ACC) -ansi
-ACC_STRICT = $(ACC) -ansi -pedantic
-ACC_TRAD = $(ACC)
-ACC_WARN_YES = -Wall 
-ACC_WARN_NO =  -w
-ACC_OPT_YES =  -O
-ACC_OPT_NO = -g
-ACC_SFLAGS_YES = -Bstatic
-ACC_SFLAGS_NO=
-ACC_SLIBS_YES =
-ACC_SLIBS_NO=
-ACC_SHRLIB_CFLAGS_YES = 
-ACC_SHRLIB_LDFLAGS_YES =
-
-
-
-# Configure OS vendor C++ compiler
-CCC_NORMAL = $(CCC)
-CCC_STRICT = $(CCC)
-CCC_TEMPL_INST_FLAG = -pedantic -DEXPL_TEMP
-CCC_WARN_YES = -Wall
-CCC_WARN_NO = -w
-CCC_OPT_YES =  -O
-CCC_OPT_NO = -g
-CCC_SFLAGS_YES = -Bstatic
-CCC_SFLAGS_NO=
-CCC_SLIBS_YES = 
-CCC_SLIBS_NO=
-CCC_DEPENDS_FLAG = -pedantic
-
-
-# added smh 6/5/98 : when building fdmgr - seems to use this not ACC
-# in effect this overides orig def in CONFIG_COMMON :
-# which is GCC_STRICT = $(GCC) -ansi -pedantic
-GCC_STRICT = $(GCC)
-G++_STRICT = $(G++) -Wtraditional -DEXPL_TEMP
-
-ARCH_DEP_CFLAGS = -DLynxOS -mposix -D_X86_ -DLYNXOS_RELEASE_2_4_0
-ARCH_DEP_LDLIBS = -lc -lbsd -lnsl -lm -lposix4d9 -llynx

config/CONFIG.Host.WIN32

@@ -3,9 +3,6 @@
 #  This file is maintained by the EPICS community.
 #  Sites may override these definitions in CONFIG_SITE.WIN32
  
-# 	Use std path variables from ms
-HOME = $(HOMEDRIVE)$(HOMEPATH)
-
 #
 # You currently get Visual C++ even if you ask for GNU.
 #
@@ -236,7 +233,7 @@ USR_DEPLIBS = $(foreach lib,$(USR_LIBS),$(firstword $($(lib)_DIR) $(EPICS_BASE_L
 
 # by default the libraries used when linking the DLL are just
 # PROD_LIBS ans SYS_PROD_LIBS minus the DLL name
-DLL_LIBS = $(subst $(LIBRARY),, $(PROD_LIBS))
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS))
  
 #
 #	EPICS libs that we need to link the DLL with

config/CONFIG.Host.hp700

@@ -53,8 +53,8 @@ HPCC_DEP_CFLAGS=+DAportable
 #New HP C++ compiler
 CCC = aCC
 # avoid treating "future errors" as actual errors
-CCC_NORMAL = $(CCC) +W302 +W829 +W818 +W392 +W469 +W495 +W749 +W667 +W392 +W684
-CCC_STRICT = $(CCC) +p
+CCC_NORMAL = $(CCC) -AA -Aa +W302 +W829 +W818 +W392 +W469 +W495 +W749 +W667 +W392 +W684
+CCC_STRICT = $(CCC) -AA -Aa +p
 CCC_TEMPL_INST_FLAG =
 CCC_WARN_YES = +w
 CCC_WARN_NO =
@@ -73,8 +73,11 @@ CCC_DEP_CFLAGS=+DAportable
 
 # +DAportable causes portable object code to be created for execution
 # on different PA-Risc machines
+
+empty:=
+space:= $(empty) $(empty)
+
 ARCH_DEP_CFLAGS = -D_HPUX_SOURCE -DHP_UX 
 ARCH_DEP_CXXFLAGS = -D_HPUX_SOURCE -DHP_UX
 ARCH_DEP_LDLIBS =
-ARCH_DEP_LDFLAGS = -Wl,+b$(DEFAULT_SHRLIB_SEARCH_PATH),+s
-
+ARCH_DEP_LDFLAGS = -Wl,+b,$(subst $(space),:,$(DEFAULT_SHRLIB_SEARCH_PATH)),+s

config/CONFIG.Host.linux-x86

@@ -1,4 +0,0 @@
-# $Id$
-
-# linux-x86 is the new name for linux
--include $(EPICS_BASE)/config/CONFIG.Host.Linux

config/CONFIG.Host.solaris

@@ -23,17 +23,18 @@ SPARCWORKS = /opt/SUNWspro
 
 # Configure OS vendor C compiler
 ACC = $(SPARCWORKS)/bin/cc
-ACC_ANSI = $(ACC) -Xa -v
+ACC_ANSI = $(ACC) -Xa
 ACC_STRICT = $(ACC) -Xc -v
 ACC_TRAD = $(ACC) -Xs
-ACC_DEP_CFLAGS = -KPIC -D_REENTRANT 
+ACC_DEP_CFLAGS = -KPIC -D_REENTRANT
+
 ACC_WARN_YES = 
 ACC_WARN_NO =  -w
 ACC_OPT_YES =  -O
 ACC_OPT_NO = -g
 ACC_SFLAGS_YES= -Bstatic
 ACC_SFLAGS_NO=
-ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
+ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic
 ACC_SLIBS_NO=
 ACC_SHRLIB_CFLAGS_YES =
 ACC_SHRLIB_LDFLAGS_YES =  -G -h $@
@@ -42,7 +43,7 @@ ACC_SHRLIB_LDFLAGS_YES =  -G -h $@
 CCC = $(SPARCWORKS)/bin/CC
 CCC_NORMAL = $(CCC) +p
 CCC_STRICT = $(CCC) +p
-CCC_DEP_CFLAGS = -KPIC -D_REENTRANT 
+CCC_DEP_CFLAGS = -KPIC -D_REENTRANT
 CCC_TEMPL_INST_FLAG =
 CCC_WARN_YES = +w
 CCC_WARN_NO = 
@@ -50,15 +51,16 @@ CCC_OPT_YES =  -O
 CCC_OPT_NO = -g
 CCC_SFLAGS_YES= -Bstatic
 CCC_SFLAGS_NO=
-CCC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
+CCC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic
 CCC_SLIBS_NO=
 CCC_DEPENDS_FLAG = -xM1
 CCC_SHRLIB_CFLAGS_YES =
 CCC_SHRLIB_LDFLAGS_YES =  -G -h $@
  
+SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
+ARCH_DEP_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) 
+POSIX_CPPFLAGS_YES += -D__EXTENSIONS__
 
-ARCH_DEP_CFLAGS = -DSOLARIS 
 # socket and nsl needed by libca.a
 ARCH_DEP_LDLIBS = -lsocket -lnsl
-ARCH_DEP_LDLIBS += -lposix4 -lpthread -lthread
 

config/CONFIG.Host.solaris-sparc

@@ -1,4 +0,0 @@
-# $Id$
-
-# solaris-sparc is the new name for solaris
--include $(EPICS_BASE)/config/CONFIG.Host.solaris

config/CONFIG.Host.solaris-sparc-gnu

@@ -1,8 +0,0 @@
-# $Id$
-
-# solaris-sparc is the new name for solaris
--include $(EPICS_BASE)/config/CONFIG.Host.solaris
-
-ANSI=GCC
-CPLUSPLUS=G++
-

config/CONFIG.Host.solaris-x86

@@ -3,64 +3,8 @@
 #  This file is maintained by the EPICS community.
 #  Sites may override these definitions in CONFIG_SITE.Host.solaris-x86
 
-ARCH_CLASS = solaris
-
-# Include definitions common to all Unix archs
-include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
-
-#
-# required by sun's C++ compiler
-#
-AR = ar
-_AR = $(AR) $(ARFLAGS)
-G++_AR = $(_AR)
-CCC_AR = $(CCC) -xar -o
-ARCMD = $($(CPLUSPLUS)_AR) $@
-
-RANLIB =
-
-SPARCWORKS = /opt/SUNWspro
-
-# Configure OS vendor C compiler
-ACC = $(SPARCWORKS)/bin/cc
-ACC_ANSI = $(ACC) -Xa
-ACC_STRICT = $(ACC) -Xc -v
-ACC_TRAD = $(ACC) -Xs
-ACC_DEP_CFLAGS = -KPIC -D_REENTRANT 
-ACC_WARN_YES = 
-ACC_WARN_NO =  -w
-ACC_OPT_YES =  -O
-ACC_OPT_NO = -g
-ACC_SFLAGS_YES= -Bstatic
-ACC_SFLAGS_NO=
-ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
-ACC_SLIBS_NO=
-ACC_SHRLIB_CFLAGS_YES =
-ACC_SHRLIB_LDFLAGS_YES =  -G -h $@
-
-# Configure OS vendor C++ compiler
-CCC = $(SPARCWORKS)/bin/CC
-CCC_NORMAL = $(CCC) +p
-CCC_STRICT = $(CCC) +p
-CCC_DEP_CFLAGS = -KPIC -D_REENTRANT 
-CCC_TEMPL_INST_FLAG =
-CCC_WARN_YES = +w
-CCC_WARN_NO = 
-CCC_OPT_YES =  -O
-CCC_OPT_NO = -g
-CCC_SFLAGS_YES= -Bstatic
-CCC_SFLAGS_NO=
-CCC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
-CCC_SLIBS_NO=
-CCC_DEPENDS_FLAG = -xM1
-CCC_SHRLIB_CFLAGS_YES =
-CCC_SHRLIB_LDFLAGS_YES =  -G -h $@
- 
-GCC = gcc
-G++ = g++
+-include $(EPICS_BASE)/config/CONFIG.Host.solaris
 
 # Solaris on x86
-ARCH_DEP_CFLAGS = -DSOLARIS  -D_X86_
-# socket and nsl needed by libca.a
-ARCH_DEP_LDLIBS = -lsocket -lnsl
+ARCH_DEP_CPPFLAGS += -D_X86_
 

config/CONFIG.Host.solarisGnu

@@ -0,0 +1,29 @@
+# CONFIG.Host.solarisGnu
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.solarisGnu
+
+ARCH_CLASS = solaris
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+AR = ar
+_AR = $(AR) $(ARFLAGS)
+G++_AR = $(_AR)
+CCC_AR = $(CCC) -xar -o
+ARCMD = $($(CPLUSPLUS)_AR) $@
+RANLIB =
+
+#==========================
+# These are overrides of ANSI and CPLUSPLUS values in CONFIG_SITE
+ANSI=GCC
+CPLUSPLUS=G++
+#==========================
+
+SOLARIS_VERSION = $(subst 5.,,$(shell uname -r))
+ARCH_DEP_CPPFLAGS += -DSOLARIS=$(SOLARIS_VERSION) 
+
+# socket and nsl needed by libca.a
+ARCH_DEP_LDLIBS += -lsocket -lnsl
+

config/CONFIG.Host.win32-x86

@@ -1,5 +0,0 @@
-# $Id$
-
-# win32-x86 is the new name for WIN32
--include $(EPICS_BASE)/config/CONFIG.Host.WIN32
-

config/CONFIG.LynxOS

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 # This file contains definitions for Vx builds
@@ -20,7 +29,6 @@ CXX = g++
 # the override definitions.
  
 # Tornado directory definitions
-VX_CONFIG_DIR_YES =
 VX_INCLUDE_YES =
 VX_GNU_YES =
 VX_GNU_BIN_YES =
@@ -28,14 +36,12 @@ VX_GNU_LIB_YES =
 
 
 # pre Torando directory definitions
-VX_CONFIG_DIR_NO =
 VX_INCLUDE_NO =
 VX_GNU_NO =
 VX_GNU_BIN_NO =
  
 # directory definitions
 VX_DIR =
-VX_CONFIG_DIR =
 VX_INCLUDE =
 VX_GNU = 
 

config/CONFIG.Vx

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 # This file contains definitions for Vx builds
@@ -11,25 +20,22 @@ OS_CLASS = vxWorks
 
 # The definitions VX_DIR, VX_GNU, GNU_DIR and GNU_LIB
 # can be overridden for specific host architectures
-# by creating a CONFIG_SITE.Vx.<host_archfile with
+# by creating a CONFIG_SITE.Vx.<host_arch> file with
 # the override definitions.
 
 # Tornado directory definitions
-VX_CONFIG_DIR_YES = $(VX_DIR)/target/config
 VX_INCLUDE_YES = $(VX_DIR)/target/h
 VX_GNU_YES = $(VX_DIR)/host/$(WIND_HOST_TYPE)
 VX_GNU_BIN_YES = $(VX_GNU)/bin
 VX_GNU_LIB_YES = $(VX_GNU)/lib
 
 # pre Torando directory definitions
-VX_CONFIG_DIR_NO = $(VX_DIR)/config
 VX_INCLUDE_NO = $(VX_DIR)/h
 VX_GNU_BIN_NO = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/bin
 VX_GNU_LIB_NO = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/lib
 
 # directory definitions
 VX_DIR = $(VX_DIR_$(TORNADO))
-VX_CONFIG_DIR = $(VX_CONFIG_DIR_$(TORNADO))
 VX_INCLUDE = $(VX_INCLUDE_$(TORNADO))
 VX_GNU = $(VX_GNU_$(TORNADO))
 GNU_BIN = $(VX_GNU_BIN_$(TORNADO))
@@ -52,7 +58,8 @@ LD = $(GNU_BIN)/ld$(CMPLR_SUFFIX) -r
 CPLUSPLUS_YES = G++
 G++ = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
 LD_G++ = $(GNU_BIN)/ld$(CMPLR_SUFFIX) -r
-NM = $(GNU_BIN)/nm$(CMPLR_SUFFIX)$(HOSTEXE)
+NM = $(GNU_BIN)/nm$(CMPLR_SUFFIX)
+MUNCH = $(GNU_BIN)/munch
 
 #--------------------------------------------------
 # Pre Tornado C++ crosscompiler definitions
@@ -129,16 +136,3 @@ WARN_CXXFLAGS = $($(CPLUSPLUS)_WARN_$(VX_WARN))
 LINK.c = $(LD) $(LDFLAGS) -o
 LINK.cc = $(LD_CXX) $(LDFLAGS) -o
 
-
-#--------------------------------------------------
-# Munch definitions
-MUNCH_SUFFIX=.munch
-MUNCHNAME = $(LIBNAME:%=%$(MUNCH_SUFFIX))
-
-#--------------------------------------------------
-# The follow 2 exports prevent gnu cross-compiler
-# from finding wrong assembler (as).
-export WIND_BASE = $(VX_DIR)
-export WIND_HOST_TYPE
-
-

config/CONFIG.Vx.T2-ppc604

@@ -0,0 +1,18 @@
+# CONFIG.Vx.ppc604_long,v 1.1.2.1 2002/12/05 20:44:26 jba Exp
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -mcpu=604 -D_GNU_TOOL -DTRUE=1
+ARCH_DEP_CFLAGS = --no-builtin -mstrict-align -mlongcall
+ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
+
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c
+

config/CONFIG.Vx.V69-ppc604

@@ -0,0 +1,17 @@
+# CONFIG.Vx.ppc604_long,v 1.1.2.1 2002/12/05 20:44:26 jba Exp
+#
+# This file is maintained by the EPICS community.
+
+GCC_OPT_YES = -O2
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -mcpu=604 -DCPU=PPC604 -D_VXWORKS_COMPATIBILITY_MODE -DBSD=44
+ARCH_DEP_CFLAGS = -mstrict-align -mlongcall -fno-implicit-fp -fno-strict-aliasing -fno-section-anchors
+VENDOR_DEP_CFLAGS = -std=c99

config/CONFIG.Vx.hkbaja60

@@ -1,16 +0,0 @@
-
-# $Id$
-#
-# This file is maintained by the EPICS community.
-
-# Vx GNU cross compiler suffix
-CMPLR_SUFFIX = 68k
- 
-# For Vx directories of form:
-#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-ARCH_CLASS = 68k
-
-# Architecture specific build flags
-ARCH_DEP_CPPFLAGS = -DCPU=MC68060 -DCPU_FAMILY=MC680X0
-ARCH_DEP_CFLAGS = -m68040
-

config/CONFIG.Vx.pc486

@@ -13,5 +13,5 @@ ARCH_CLASS = pc486
 ARCH_DEP_CPPFLAGS = -DCPU=I80486 -DCPU_FAMILY=I80x86 -D_X86_ 
 ARCH_DEP_CFLAGS = -m486
 ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop
+ARCH_DEP_CFLAGS +=   -fno-builtin -fno-defer-pop
 

config/CONFIG.Vx.pcPentium

@@ -1,17 +0,0 @@
-
-# CONFIG.Vx.pentium
-#
-# This file is maintained by the EPICS community.
-
-# Vx GNU cross compiler suffix
-CMPLR_SUFFIX = 386
- 
-# For Vx directories of form:
-#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-ARCH_CLASS = pcPentium
-
-ARCH_DEP_CPPFLAGS = -DCPU=PENTIUM -D_X86_ 
-ARCH_DEP_CFLAGS = -mpentium
-ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop
-

config/CONFIG.Vx.ppc603

@@ -13,4 +13,4 @@ ARCH_CLASS = ppc
 ARCH_DEP_CPPFLAGS = -DCPU=PPC603 -DTRUE=1
 ARCH_DEP_CFLAGS = -mcpu=603 --no-builtin -mstrict-align
 
-# ARCH_DEP_CFLAGS== -fsigned-char     #May need for calcPerform.c
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c

config/CONFIG.Vx.ppc603_long

@@ -0,0 +1,16 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -DCPU=PPC603 -DTRUE=1
+ARCH_DEP_CFLAGS = -mcpu=603 --no-builtin -mstrict-align -mlongcall
+
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c

config/CONFIG.Vx.ppc604

@@ -13,5 +13,5 @@ ARCH_CLASS = ppc
 ARCH_DEP_CPPFLAGS = -DCPU=PPC604 -D_GNU_TOOL -DTRUE=1
 ARCH_DEP_CFLAGS = -mcpu=604 --no-builtin -mstrict-align
 
-# ARCH_DEP_CFLAGS== -fsigned-char     #May need for calcPerform.c
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c
 

config/CONFIG.Vx.ppc604_long

@@ -0,0 +1,17 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = ppc
+ 
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = ppc
+
+# Architecture specific build flags 
+ARCH_DEP_CPPFLAGS = -DCPU=PPC604 -D_GNU_TOOL -DTRUE=1
+ARCH_DEP_CFLAGS = -mcpu=604 --no-builtin -mstrict-align -mlongcall
+
+# ARCH_DEP_CFLAGS+= -fsigned-char     #May need for calcPerform.c
+

config/CONFIG.Vx.sbs_pc6

@@ -0,0 +1,16 @@
+# Created by Korobov for SBS PC6
+# CONFIG.Vx.sbs_pc6
+#
+# This file is maintained by the EPICS community.
+
+# Vx GNU cross compiler suffix
+CMPLR_SUFFIX = 386
+
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = sbs_pc6
+
+ARCH_DEP_CPPFLAGS = -DCPU=PENTIUM -DCPU_VARIANT=PENTIUM -D_X86_ 
+ARCH_DEP_CFLAGS = -mpentium
+ARCH_DEP_CXXFLAGS += -x 'c++'
+ARCH_DEP_CFLAGS +=   -fno-builtin -fno-defer-pop

config/CONFIG.Vx.simpc

@@ -1,21 +0,0 @@
-
-# CONFIG.Vx.simpc
-#
-# This file is maintained by the EPICS community.
-
-# Vx GNU cross compiler suffix
-CMPLR_SUFFIX = simpc
- 
-# For Vx directories of form:
-#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
-ARCH_CLASS = simpc
-
-ARCH_DEP_CPPFLAGS = -DCPU=SIMNT -DCPU_FAMILY=SIMNT -D_X86_ 
-ARCH_DEP_CFLAGS = -mpentium
-ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop -DRW_MULTI_THREAD -D_REENTRANT -nostdlib
-
-#
-# no drivers on the Tornado II simulator
-#
-DIRS = $(filter-out drv dev devOpt, $(DIRS)) 

config/CONFIG.Vx.vxWorks-486

@@ -1,4 +0,0 @@
-# $Id$
-
-# vxWorks-486 is the new R3.14 name for pc486
-include $(EPICS_BASE)/config/CONFIG.Vx.pc486

config/CONFIG.Vx.vxWorks-68040

@@ -1,4 +0,0 @@
-# $Id$
-
-# vxWorks-68040 is the new R3.14 name for mv167
-include $(EPICS_BASE)/config/CONFIG.Vx.mv167

config/CONFIG.Vx.vxWorks-68040lc

@@ -1,4 +0,0 @@
-# $Id$
-
-# vxWorks-68040lc is the new R3.14 name for mv162lc
-include $(EPICS_BASE)/config/CONFIG.Vx.mv162lc

config/CONFIG.Vx.vxWorks-68060

@@ -1,4 +0,0 @@
-# $Id$
-
-# vxWorks-68060 is the new R3.14 name for mv177
-include $(EPICS_BASE)/config/CONFIG.Vx.mv177

config/CONFIG.Vx.vxWorks-ppc604

@@ -1,4 +0,0 @@
-# $Id$
-
-# vxWorks-ppc604 is the new R3.14 name for ppc604
-include $(EPICS_BASE)/config/CONFIG.Vx.ppc604

config/CONFIG.Vx.vxipc

@@ -13,5 +13,5 @@ ARCH_CLASS = pc486
 ARCH_DEP_CPPFLAGS = -DCPU=I80486 -DCPU_FAMILY=I80x86 -D_X86_ 
 ARCH_DEP_CFLAGS = -m486
 ARCH_DEP_CXXFLAGS += -x 'c++' 
-ARCH_DEP_CFLAGS += -fno-defer-pop
+ARCH_DEP_CFLAGS +=   -fno-builtin -fno-defer-pop
 

config/CONFIG_BASE

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -27,16 +36,19 @@ DIRS += dbtools
 DIRS += rsrv
 DIRS += rec
 DIRS += as 
-DIRS += drv
-DIRS += dev
-DIRS += devOpt
+#DIRS += drv
+#DIRS += dev
+DIRS += dev/softDev
+DIRS += dev/symbDev
+DIRS += dev/testDev
+#DIRS += devOpt
 DIRS += iocCore
 
 #
 # if CPLUSPLUS isnt empty then include C++ src codes
 #
-DIRS += $(patsubst %,gdd,$(strip $(CPLUSPLUS)))
-DIRS += $(patsubst %,cas,$(strip $(CPLUSPLUS)))
+#DIRS += $(patsubst %,gdd,$(strip $(CPLUSPLUS)))
+#DIRS += $(patsubst %,cas,$(strip $(CPLUSPLUS)))
 
 EPICS_BASE = $(TOP)
 

config/CONFIG_BASE_VERSION

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -8,19 +17,15 @@
 #
 
 EPICS_VERSION=3
-EPICS_REVISION=14
-EPICS_MODIFICATION=0
-EPICS_UPDATE_NAME=beta
-EPICS_UPDATE_LEVEL=1
+EPICS_REVISION=13
+EPICS_MODIFICATION=10
+EPICS_UPDATE_NAME=
+EPICS_UPDATE_LEVEL=0
 
 EPICS_LOCAL_NAME=B
 EPICS_LOCAL_VERSION=0
 
-CVS_DATE="\$$Date$$"
-CVS_TAG="\$$Name$$"
-
 EPICS_VERSION_STRING="EPICS Version ${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}.$(EPICS_LOCAL_NAME)$(EPICS_LOCAL_VERSION)"
 
 CVS_DATE="\$$Date$$"
 
-BASE_3_14=YES

config/CONFIG_COMMON

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -60,8 +69,8 @@ INSTALL_LIBRARY = $(INSTALL)
 
 # dbtools from EPICS
 
-# state notation language compiler (removed from base for R3.14)
-SNC = $(SEQ)/bin/$(HOST_ARCH)/snc$(EXE)
+# state notation language compiler (installed from base/src/sequencer)
+SNC = $(EPICS_BASE_HOST_BIN)/snc$(EXE)
 
 ifdef T_A
 

config/CONFIG_COMPAT

@@ -1,36 +0,0 @@
-#
-# $Id$
-#
-# Convert old HOST_ARCH environment variable 
-
-#Syntax:
-# ARCH_<host_arch> = <epics_host_arch>
-ARCH_solaris = solaris-sparc
-ARCH_sun4 = sun4-sparc
-ARCH_Linux = linux-x86
-ARCH_WIN32 = win32-x86
-ARCH_hp700 = hpux-m68k
-ARCH_hp700 = osf-alpha
-ARCH_Borland = win32-x86-borland
-
-ifndef EPICS_HOST_ARCH
-ifdef HOST_ARCH
-EPICS_HOST_ARCH = $(firstword $(ARCH_$(HOST_ARCH)) $(HOST_ARCH))
-else 
-EPICS_HOST_ARCH = unsupported
-endif
-endif
-
-HOST_ARCH := $(EPICS_HOST_ARCH)
-
-# Note: 
-# The EPICS_HOST_ARCH solaris-sparc-gnu is new for base release R3.14
-# so existing R3.13 applications, when HOST_ARCH is set to solaris and
-# when built with R3.14, will look for base solaris-sparc directories
-# and not solaris-sparc-gnu. If you plan to build R3.13 applications 
-# against a solaris-sparc-gnu built R3.14 base, you should set
-# ANSI=GCC and CPLUSPLUS=G++ in base/config/CONFIG_SITE.Host.solaris
-# and change ARCH_solaris=solaris-sparc to ARCH_solaris=solaris-sparc-gnu
-# in base/config/CONFIG_COMPAT.
-
-

config/CONFIG_ENV

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #	$Id$
 #	Author:	Andrew Johnson
 #	Date:	20 April 1995

config/CONFIG_HOST_ARCH.Borland

@@ -2,7 +2,6 @@
 #
 
 EXE=.exe
-HOSTEXE=.exe
 
 CP   =$(PERL) $(EPICS_BASE_HOST_BIN)/cp.pl
 MV   =$(PERL) $(EPICS_BASE_HOST_BIN)/mv.pl
@@ -15,6 +14,9 @@ ECHO=echo
 
 WIND_HOST_TYPE = x86-win32
  
-# 	Use std path variables from ms
+# Does not work if using cygwin make
+# because HOME is always defined
+ifndef HOME
 HOME = $(HOMEDRIVE)$(HOMEPATH)
+endif
 

config/CONFIG_HOST_ARCH.Linux

@@ -5,5 +5,5 @@
 # Include definitions common to all Unix archs
 include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
 
-WIND_HOST_TYPE = i386-linux2
+WIND_HOST_TYPE = x86-linux
 

config/CONFIG_HOST_ARCH.WIN32

@@ -2,7 +2,6 @@
 #
 
 EXE=.exe
-HOSTEXE=.exe
 
 CP   =$(PERL) $(EPICS_BASE_HOST_BIN)/cp.pl
 MV   =$(PERL) $(EPICS_BASE_HOST_BIN)/mv.pl
@@ -14,6 +13,9 @@ ECHO=echo
 
 WIND_HOST_TYPE = x86-win32
  
-# 	Use std path variables from ms
+# Does not work if using cygwin make
+# because HOME is always defined
+ifndef HOME
 HOME = $(HOMEDRIVE)$(HOMEPATH)
+endif
 

config/CONFIG_HOST_ARCH.cygwin32

@@ -6,7 +6,6 @@
 -include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
 
 EXE=.exe
-HOSTEXE=.exe
 
 TORNADO=YES
 

config/CONFIG_HOST_ARCH.linux-x86

@@ -1,4 +0,0 @@
-# $Id$
-
-# linux-x86 is the new name for linux
--include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.Linux

config/CONFIG_HOST_ARCH.solaris-sparc

@@ -1,4 +0,0 @@
-# $Id$
-
-# solaris-sparc is the new name for solaris
--include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solaris

config/CONFIG_HOST_ARCH.solaris-sparc-gnu

@@ -1,4 +0,0 @@
-#  $Id$
-
--include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solaris
-

config/CONFIG_HOST_ARCH.solarisGnu

@@ -1,9 +1,9 @@
-#  CONFIG_HOST_ARCH.LynxOS
+#  CONFIG_HOST_ARCH.solarisGnu
 #
-# Override values in CONFIG.LynxOS
+# Override values in CONFIG.Vx
 
 # Include definitions common to all Unix archs
 include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon
 
-WIND_HOST_TYPE = LynxOS
+WIND_HOST_TYPE = sun4-solaris2
 

config/CONFIG_HOST_ARCH.win32-x86

@@ -1,4 +0,0 @@
-# $Id$
-
-# win32-x86 is the new name for WIN32
--include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.WIN32

config/CONFIG_SITE

@@ -8,6 +8,7 @@
 #	only.
 #
 
+INSTALL_LOCATION=/usr/local/epics/base-3.13.10
 
 #  The host architecture performing the build,
 #	i.e.: the arch running DCT/getrel/etc.
@@ -21,6 +22,7 @@
 #	hp700
 #	sgi
 #	solaris
+#	solarisGnu  (GNU compiler)
 #	solaris-x86
 #	sun4
 #
@@ -46,10 +48,14 @@ endif
 #       mv2700
 #       niCpu030
 #       pc486
+#       ppc603
 #       ppc604
+#       ppc603_long (over 32MB)
+#       ppc604_long (over 32MB)
+#       sbs_pc6
 #       vxipc
 #
-CROSS_COMPILER_TARGET_ARCHS=vxWorks-68040 vxWorks-ppc604
+CROSS_COMPILER_TARGET_ARCHS=T2-ppc604 V69-ppc604
 
 
 #  If only a subset of the host architectures perform
@@ -65,8 +71,8 @@ TORNADO=YES
  
 #  VxWorks directory for TORNADO=YES
 #VX_DIR_YES=c:\\Tornado
-#VX_DIR_YES = /usr/local/vw/tornado101
-VX_DIR_YES = /usr/local/vw/tornado202
+VX_DIR_YES = /usr/local/vw/tornado202p1
+
 
 #  VxWorks directory for TORNADO=NO
 #VX_DIR_NO=$(VW)
@@ -164,4 +170,3 @@ E2DB_FLAGS =
 #dbst 
 DBST = $(EPICS_EXTENSIONS)/bin/$(HOST_ARCH)/dbst
 
-include $(EPICS_BASE)/config/CONFIG_COMPAT

config/CONFIG_SITE.Host.LynxOS

@@ -1,15 +0,0 @@
-#
-# $Id$
-#
-# Site Specific Configuration Information
-# Only the local epics system manager should modify this file
-
-# APS overrides of definitions 
-
-GCC = gcc
-G++ = g++
-CC = gcc
-CCC = g++
-ACC = gcc
-PLUSPLUS = g++
-CXX = g++

config/CONFIG_SITE.Host.hp700

@@ -8,7 +8,7 @@
 SHARED_LIBRARIES=YES
 
 # where we expect to find shared libraries if not found elsewhere
-# DEFAULT_SHRLIB_SEARCH_PATH = /home/controls/epics/cdev/lib/hpux-10.20:/home/controls/epics/cdev/lib/hpux-10.XX:/opt/TclTk/lib:/opt/xpm/lib/X11:/usr/lib/pa1.1:/usr/lib:/lib:/opt/csr/installed/HP-UX/lib::/opt/OPI/GUI/lib/hp700:/opt/OPI/MapperApplications/lib/hp700:/opt/OPI/cdevAppl/lib/hp700:/opt/OPI/cmlog/lib/hp700:/opt/OPI/models/lib/hp700:/opt/OPI/sddsAppl/lib/hp700
+#DEFAULT_SHRLIB_SEARCH_PATH = /opt/epics/R$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION)/support/base/$(EPICS_VERSION)-$(EPICS_REVISION)-$(EPICS_MODIFICATION)/lib/hp700
 DEFAULT_SHRLIB_SEARCH_PATH = /cs/lib/R$(EPICS_VERSION).$(EPICS_REVISION).$(EPICS_MODIFICATION).$(EPICS_UPDATE_NAME)$(EPICS_UPDATE_LEVEL):$(INSTALL_LIB)
 
 #No special action should be required to build or use shared libraries.

config/CONFIG_SITE.Host.linux-x86

@@ -1,6 +0,0 @@
-# $Id$
-
-# linux-x86 is the new name for linux
--include $(EPICS_BASE)/config/CONFIG_SITE.Host.Linux
-
-SHARED_LIBRARY=YES

config/CONFIG_SITE.Host.solaris

@@ -6,6 +6,6 @@
 
 # APS overrides of definitions 
 
-GCC = /opt/gnu/bin/gcc
-G++ = /opt/gnu/bin/g++
+#GCC = /opt/gnu/bin/gcc
+#G++ = /opt/gnu/bin/g++
 

config/CONFIG_SITE.Host.solaris-sparc

@@ -1,4 +0,0 @@
-# $Id$
-
-# solaris-sparc is the new name for solaris
--include $(EPICS_BASE)/config/CONFIG_SITE.Host.solaris

config/CONFIG_SITE.Host.solaris-sparc-gnu

@@ -1,4 +0,0 @@
-# $Id$
-
-# solaris-sparc is the new name for solaris
--include $(EPICS_BASE)/config/CONFIG_SITE.Host.solaris

config/CONFIG_SITE.Host.win32-x86

@@ -1,5 +0,0 @@
-# $Id$
-
-# win32-x86 is the new name for WIN32
--include $(EPICS_BASE)/config/CONFIG_SITE.Host.WIN32
-

config/CONFIG_SITE.Vx.Linux

@@ -7,4 +7,22 @@
 # combinations by creating a CONFIG_SITE.Vx.Linux.<T_A>
 # file with the override definitions.
 
+## ---- jba overrides for cross compiler
+## VX_DIR needed for "export WIND_BASE = $(VX_DIR)"
+#VX_DIR_YES = /home/phoebus/JBA/gnu
+#VX_GNU_YES = $(VX_DIR)
+#VX_INCLUDE_YES = $(VX_GNU)/$(GNU_TARGET)/include
+#
+#CMPLR_PREFIX=  $(GNU_TARGET)-
+#CMPLR_SUFFIX=
+#GCC    = $(GNU_BIN)/$(CMPLR_PREFIX)gcc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
+#AR     = $(GNU_BIN)/$(CMPLR_PREFIX)ar$(CMPLR_SUFFIX)
+#CPP    = $(GNU_BIN)/$(CMPLR_PREFIX)gcc$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc -x c -E
+#RANLIB = $(GNU_BIN)/$(CMPLR_PREFIX)ranlib$(CMPLR_SUFFIX)
+#LD     = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
+#G++    = $(GNU_BIN)/$(CMPLR_PREFIX)g++$(CMPLR_SUFFIX) -B$(GNU_LIB)/gcc-lib/ -nostdinc
+#LD_G++ = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
+#NM     = $(GNU_BIN)/$(CMPLR_PREFIX)nm$(CMPLR_SUFFIX)
+## ---- end jba overrides
+
 -include $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE).$(HOST_ARCH).$(T_A)

config/CONFIG_SITE.Vx.Linux.mv167

@@ -2,9 +2,12 @@
 #
 # This file contains overrides for Vx builds
 
+## ---- jba overrides for cross compiler
+#GNU_TARGET=m68k-wrs-vxworks
+## ---- end jba overrides
+
 # ORNL SNS overrides for cross compilers
 #VX_DIR_YES = /opt/tornado20/
-#VX_CONFIG_DIR_YES = $(VX_DIR)/target/config
 #VX_INCLUDE_YES = /usr/local/crossgcc/m68k/m68k-wrs-vxworks/sys-include
 #VX_GNU_YES = /usr/local/crossgcc/m68k/
 #VX_GNU_BIN_YES = $(VX_GNU)/bin

config/CONFIG_SITE.Vx.Linux.ppc603

@@ -4,7 +4,6 @@
 
 # ORNL SNS overrides for cross compilers
 #VX_DIR_YES = /opt/tornado20/
-#VX_CONFIG_DIR_YES = $(VX_DIR)/target/config
 #VX_INCLUDE_YES = /usr/local/crossgcc/ppc/powerpc-wrs-vxworks/sys-include
 #VX_GNU_YES = /usr/local/crossgcc/ppc/
 #VX_GNU_BIN_YES = $(VX_GNU)/bin

config/CONFIG_SITE.Vx.T2-ppc604

@@ -0,0 +1,9 @@
+VX_DIR = /afs/psi.ch/project/vxworks/Tornado2.2
+
+GCC = $(GNU_BIN)/cc$(CMPLR_SUFFIX)
+CPP = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -x c -E
+G++ = $(GNU_BIN)/cc$(CMPLR_SUFFIX)
+
+# Compiler bug: Optimization corrupts floating point calculations
+VX_OPT = NO
+GCC_OPT_NO =

config/CONFIG_SITE.Vx.V69-ppc604

@@ -0,0 +1,20 @@
+VXWORKS_VERSION = 6.9
+VXWORKS_MAJOR_VERSION = 6
+
+WIND_HOST_TYPE = x86-linux2
+WIND_BASE=/afs/psi.ch/project/vxworks/VxWorks$(VXWORKS_VERSION)
+LD_LIBRARY_PATH+=:$(WIND_BASE)/lmapi-5.0/$(WIND_HOST_TYPE)/lib
+export WIND_BASE LD_LIBRARY_PATH
+
+VX_DIR = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)
+OP_SYS_INCLUDES += -I$(VX_DIR)/target/h/wrn/coreip
+
+GNU_DIR := $(wildcard $(WIND_BASE)/gnu/*-vxworks-*/$(WIND_HOST_TYPE))
+GNU_BIN = $(GNU_DIR)/bin
+GCC_EXEC_PREFIX = $(GNU_DIR)/libexec/gcc
+
+GCC = $(GNU_BIN)/cc$(CMPLR_SUFFIX)
+CPP = $(GNU_BIN)/cc$(CMPLR_SUFFIX) -x c -E
+G++ = $(GNU_BIN)/cc$(CMPLR_SUFFIX)
+
+NM = $(VX_DIR)/host/binutils/$(WIND_HOST_TYPE)/bin/nm$(CMPLR_SUFFIX)

config/Makefile

@@ -1,18 +1,19 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 # $Id$
 #
 
 TOP=..
 
-include $(TOP)/configure/CONFIG
+include $(TOP)/config/CONFIG_BASE
 
-INSTALL_CONFIG = $(INSTALL_LOCATION)/config
-
-CONFIGS += $(subst ../,,$(wildcard ../CONFIG*))
-CONFIGS += $(subst ../,,$(wildcard ../RULES*))
-
-SCRIPTS_HOST += $(wildcard ../tools/*.pl)
-SCRIPTS_HOST += ../tools/installEpics
-
-include $(TOP)/configure/RULES
+include $(TOP)/config/RULES_ARCHS
 

config/Makefile.Host

@@ -0,0 +1,43 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+#
+# $Id$
+#
+
+TOP = ../..
+include $(TOP)/config/CONFIG_BASE
+
+CONFIGS += CONFIG
+CONFIGS += CONFIG_BASE
+CONFIGS += CONFIG_BASE_VERSION
+CONFIGS += CONFIG_COMMON
+CONFIGS += CONFIG_ENV
+
+CONFIGS += CONFIG.Host.$(HOST_ARCH)
+CONFIGS += CONFIG_HOST_ARCH.$(HOST_ARCH)
+CONFIGS += CONFIG.Host.UnixCommon
+CONFIGS += CONFIG_HOST_ARCH.UnixCommon
+
+CONFIGS += CONFIG.Vx
+CONFIGS += $(CROSS_COMPILER_TARGET_ARCHS:%=CONFIG.Vx.%)
+
+CONFIGS += CONFIG_SITE
+CONFIGS += CONFIG_SITE_ENV
+CONFIGS += $(subst ../,,$(wildcard ../CONFIG_SITE*))
+
+CONFIGS += RULES.Host
+CONFIGS += RULES.Unix
+CONFIGS += RULES.Vx
+CONFIGS += RULES_ARCHS
+CONFIGS += RULES_DIRS
+CONFIGS += RULES_TOP
+
+include $(TOP)/config/RULES.Host
+

config/RULES.Host

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 #	Rules for making things specified in Makefile.Host
@@ -31,6 +40,7 @@ vpath %.c $(USER_VPATH) ../os/$(ARCH_CLASS) ../os/generic ..
 vpath %.cc $(USER_VPATH) ../os/$(ARCH_CLASS) ../os/generic ..
 vpath %.cpp $(USER_VPATH) ../os/$(ARCH_CLASS) ../os/generic ..
 vpath %.rc $(USER_VPATH) ../os/$(ARCH_CLASS) ../os/generic ..
+vpath %.jar $(USER_VPATH) ..
 
 #	check for add-on CFLAGS and CXXFLAGS
 #
@@ -225,7 +235,7 @@ endif
 #	(convenience for extensions and applications)
 ifneq ($(EPICS_BASE),$(TOP))
 ifneq ($(EPICS_BASE),$(INSTALL_LOCATION))
-EPICS_INCLUDES += -I$(EPICS_BASE_INCLUDE) -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS)
+EPICS_INCLUDES += -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS) -I$(EPICS_BASE_INCLUDE)
 EPICS_DBDFLAGS += -I $(EPICS_BASE)/dbd
 endif
 endif
@@ -354,7 +364,7 @@ buildInstall :: build $(TARGETS) \
 clean::
 	@echo "Cleaning"
 	@$(RM) *.i *$(OBJ) *.a $(PROD) $(TESTPROD) $(LIBNAME) $(SHRLIBNAME) $(INC) \
-	*$(RES) $(TARGETS) $(DBDINSTALL) $(MENUS) $(RECTYPES) $(BPTS)
+	*$(RES) $(TARGETS) *.dbd $(MENUS) $(RECTYPES) $(BPTS)
 ifdef DBDEXPAND
 	@$(RM) $(DBDNAME)
 endif
@@ -379,6 +389,14 @@ PRODNAME_SRCS += $(PRODNAME_SRCS_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(PRODNAME_OBJS_$(ARCH_CLASS))),)
+PRODNAME_OBJS += $(subst -nil-,,$(PRODNAME_OBJS_$(ARCH_CLASS)))
+else
+ifdef PRODNAME_OBJS_DEFAULT
+PRODNAME_OBJS += $(PRODNAME_OBJS_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(PRODNAME_RCS_$(ARCH_CLASS))),)
 PRODNAME_RCS += $(subst -nil-,,$(PRODNAME_RCS_$(ARCH_CLASS)))
 else
@@ -397,10 +415,10 @@ else
 PRODNAME_LINKER = $(LINK.c)
 endif
 
-PRODNAME_OBJS=$(addsuffix $(OBJ), $(basename $(PRODNAME_SRCS)))
-PRODNAME_RESS=$(addsuffix $(RES), $(basename $(PRODNAME_RCS)))
+PRODNAME_OBJS+=$(addsuffix $(OBJ), $(basename $(PRODNAME_SRCS)))
+PRODNAME_RESS+=$(addsuffix $(RES), $(basename $(PRODNAME_RCS)))
 
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 $(PRODNAME): $(PRODNAME_OBJS) $(PRODNAME_RESS)
 	@$(RM) $@
 	$(PRODNAME_LINKER) $(PRODNAME_OBJS) , $@ ,,$(LINKLIBS) $(subst /,\\,$(LDLIBS)),, $(PRODNAME_RESS)
@@ -445,10 +463,12 @@ endif  #ifdef PROD
 #     Java classes and packages
 #
 
+ifdef JAVA
 DIRECTORY_TARGETS += $(INSTALL_JAVA)
 ifdef PACKAGE
 DIRECTORY_TARGETS += $(INSTALL_JAVA)/$(PACKAGE)
 endif
+endif
 
 vpath %.class $(INSTALL_JAVA)/$(PACKAGE)
 
@@ -457,32 +477,47 @@ TESTCLASSES += $(subst .java,.class,$(TESTJAVA))
 INSTALL_CLASSES =$(CLASSES:%=$(INSTALL_JAVA)/$(PACKAGE)/%)
 INSTALL_JAR =$(JAR:%=$(INSTALL_JAVA)/%)
 
+ifeq ($(strip $(JAVADOC)),YES)
+DIRECTORY_TARGETS += $(INSTALL_HTML)
+INSTALL_JAVADOC = $(CLASSES:%.class=$(INSTALL_HTML)/%.html)
+ifdef PACKAGE
+DIRECTORY_TARGETS += $(INSTALL_HTML)/$(PACKAGE)
+INSTALL_JAVADOC = $(CLASSES:%.class=$(INSTALL_HTML)/$(PACKAGE)/$(PACKAGE)/%.html)
+endif
+endif
+
 JAR_OPTIONS = cvf
 ifdef MANIFEST
 JAR_OPTIONS = cvmf
 endif
-JAR_DEPFILES +=  $(wildcard $(JAR_INPUT) $(addsuffix /*,$(JAR_INPUT)))
+#JAR_DEPFILES +=  $(wildcard $(JAR_INPUT) $(addsuffix /*,$(JAR_INPUT)))
+JAR_DEPFILES +=  $(JAR_INPUT)
 
 $(DIRECTORY_TARGETS) :
 	$(MKDIR) $@
 
 build:: $(TESTCLASSES) $(JAR)
 
-buildInstall :: $(DIRECTORY_TARGETS) $(INSTALL_CLASSES) $(INSTALL_JAR)
+buildInstall :: $(DIRECTORY_TARGETS) $(INSTALL_CLASSES) $(INSTALL_JAR) $(INSTALL_JAVADOC)
 
 clean::
-	@$(RM) $(TESTCLASSES) $(JAR)
+	@$(RM) $(TESTCLASSES) $(JAR) $(INSTALL_CLASSES) $(INSTALL_JAVADOC)
 
 %.class:%.java
 	@echo Creating java class file $@
 	$(RM) $@
 	$(JAVACCMD) $<
 
-$(INSTALL_JAVA)/$(PACKAGE)/%.class:%.java
+$(INSTALL_JAVA)/$(PACKAGE)/%.class:%.java 
 	@echo Creating java class file $@
 	@$(RM) $@
 	$(JAVACCMD) -d $(INSTALL_JAVA) $<
 
+$(INSTALL_JAVADOC):$(JAVA)
+	@echo Creating javadoc html files $@
+	@$(RM) $@
+	$(JAVADOCCMD) -d $(INSTALL_HTML)/$(PACKAGE) $(PACKAGE) 
+
 $(JAR):%.jar:  $(JAR_DEPFILES)
 	@echo Creating java jar file $@
 	@$(RM) $@
@@ -490,12 +525,12 @@ $(JAR):%.jar:  $(JAR_DEPFILES)
 
 $(INSTALL_JAVA)/%.jar: %.jar
 	@echo "Installing jar file $@"
-	$(INSTALL) -d -m 644 $< $(@D)
+	@$(INSTALL) -d -m 644 $< $(@D)
 
 $(PACKAGE)_%.h:$(INSTALL_JAVA)/$(PACKAGE)/%.class
 	$(JAVAHCMD) $(PACKAGE).$*
 
-.PRECIOUS: $(INSTALL_CLASSES)
+.PRECIOUS: $(INSTALL_CLASSES) $(INSTALL_JAVADOC)
 
 #---------------------------------------------------------------
 #---------------------------------------------------------------
@@ -519,7 +554,7 @@ ifneq ($(strip $(LIBSRCS) $(SRCS) $(COND_PROD_SRCS) $(SRCS.c) $(SRCS.cc)),)
 	$(DEPENDS_RULE)
 endif
 
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 %$(EXE): %.c
 	@$(RM) $@
 	$(COMPILE.c)  $<
@@ -615,8 +650,8 @@ endif
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
 
-%.c:	%.stt
-	@echo "converting $<
+%.c: ../%.stt
+	@echo "converting $<"
 	ln -s $< $*.st
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.st
 	@$(RM) $*.st
@@ -656,29 +691,29 @@ $(INSTALL_DBD)/%: ../%
  
 %Record.h: %Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 	        $(DBDFLAGS)  $<
  
 %Record.h: ../%Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 	        $(DBDFLAGS)  $<
  
 menu%.h: menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
  
 menu%.h: ../menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
  
 bpt%.dbd: bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
  
 bpt%.dbd: ../bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
  
 # Patch for old applications
 ifdef USER_DBDFLAGS
@@ -688,15 +723,16 @@ endif
 ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo Expanding dbd
-	@$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbExpand$(EXE) $(DBDFLAGS) $< > $@
+	@$(RM) $@ $@-new
+	$(EPICS_BASE_HOST_BIN)/dbExpand$(EXE) $(DBDFLAGS) $< > $@-new
+	@$(MV) $@-new $@
 
 ifneq (,$(wildcard ../base.dbd))
 $(DBDNAME): ../base.dbd
 endif
 endif
 
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 $(DLL_LINK_LIBNAME) $(SHRLIBNAME): $(LIBOBJS) $(LIBNAME_RESS)
 	$(LINK.shrlib) $(LIBOBJS) , $@ ,,$(LINKLIBS) $(subst /,\\,$(DLL_LDLIBS)), $(DLL_DEF_FLAG), $(LIBNAME_RESS)
 
@@ -705,7 +741,7 @@ $(DLL_LINK_LIBNAME) $(SHRLIBNAME): $(LIBOBJS) $(LIBNAME_RESS)
 	$(LINK.shrlib) $(LIBOBJS) $(DLL_LDLIBS) $(LIBNAME_RESS)
 
 endif
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 # rule for lib (archive of object files) creation
 $(LIBNAME): $(LIBOBJS)
 	$(RM) $@
@@ -747,10 +783,10 @@ $(INSTALL_LIB)/%.lib: %.lib
 
 $(INSTALL_SHRLIB)/lib%: lib%
 	@echo "Installing library $@"
-	@$(INSTALL) -d -m 555 $< $(INSTALL_SHRLIB)
+	@$(INSTALL_LIBRARY) -d -m 555 $< $(INSTALL_SHRLIB)
 ifdef SHRLIB_VERSION
-	@$(RM) $(@:%.$(SHRLIB_VERSION)=%)
-	ln -s $< $(@:%.$(SHRLIB_VERSION)=%) 
+	$(RM) $(subst .$(SHRLIB_VERSION),,$@)
+	ln -s $< $(subst .$(SHRLIB_VERSION),,$@)
 endif # SHRLIB_VERSION
 
 $(INSTALL_TCLLIB)/%: %

config/RULES.Unix

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 INCREC +=$(RECTYPES) $(MENUS)
@@ -139,8 +148,8 @@ $(TARGETS) $(PROD): $(DEPLIBS)
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
 
-%.c: %.stt
-	@echo "converting $<
+%.c: ../%.stt
+	@echo "converting $<"
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $<
 
@@ -179,29 +188,29 @@ $(INSTALL_DBD)/%: ../%
  
 %Record.h: %Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH \
 	        $(DBDFLAGS)  $<
  
 %Record.h: ../%Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH \
 	        $(DBDFLAGS)  $<
  
 menu%.h: menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH $<
  
 menu%.h: ../menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH $<
  
 bpt%.dbd: bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt $<
  
 bpt%.dbd: ../bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt $<
  
 # Patch for old applications
 ifdef USER_DBDFLAGS
@@ -211,8 +220,9 @@ endif
 ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo expanding dbd
-	@$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbExpand $(DBDFLAGS) $< > $@
+	@$(RM) $@ $@-new
+	$(EPICS_BASE_HOST_BIN)/dbExpand $(DBDFLAGS) $< > $@-new
+	@$(MV) $@-new $@
 
 ifneq (,$(wildcard ../base.dbd))
 $(DBDNAME): ../base.dbd

config/RULES.Vx

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 ifneq ($(strip $(LIBOBJS_$(ARCH_CLASS))),)
@@ -11,7 +20,6 @@ endif
 INCREC +=$(RECTYPES) $(MENUS)
 INSTALL_PROD = $(PROD:%= $(INSTALL_BIN)/%)
 INSTALL_LIBS = $(LIBNAME:%= $(INSTALL_BIN)/%)
-INSTALL_MUNCHES = $(MUNCHNAME:%= $(INSTALL_BIN)/%)
 INSTALL_LIBS_CXX = $(LIBNAME_CXX:%= $(INSTALL_BIN)/%)
 INSTALL_INC = $(INC:%= $(INSTALL_INCLUDE)/%)
 INSTALL_OSINCLUDE = $(INSTALL_INCLUDE)/os/vxWorks
@@ -53,7 +61,7 @@ rebuild:: clean install
 pre_build:: 
 
 build:: pre_build $(MENUS) $(RECTYPES) $(BPTS)\
-         $(LIBNAME) $(LIBNAME_CXX) $(MUNCHNAME) $(TARGETS) $(PROD)
+         $(LIBNAME) $(LIBNAME_CXX) $(TARGETS) $(PROD)
 ifdef DBDEXPAND
 build::	$(DBDNAME)
 endif
@@ -63,7 +71,7 @@ inc:: $(INSTALL_INC) $(INSTALL_OSINC)
 install:: buildInstall 
 
 buildInstall :: build $(INSTALL_INCREC)\
-         $(INSTALL_LIBS) $(INSTALL_LIBS_CXX) $(INSTALL_MUNCHES) \
+         $(INSTALL_LIBS) $(INSTALL_LIBS_CXX) \
 	 $(TARGETS) $(INSTALL_PROD) \
 	 $(INSTALL_MANS) $(INSTALL_DOCS) \
          $(INSTALL_HTMLS) \
@@ -84,10 +92,7 @@ endif
 clean::
 	@echo "Cleaning"
 	@$(RM) *.i *.o *.a *.out $(TARGETS) $(PROD) $(LIBNAME) $(INC) \
-	$(DBDINSTALL) $(MENUS) $(RECTYPES) $(BPTS) $(DBDNAME)
-ifdef MUNCH
-	@$(RM) $(MUNCHNAME) ctdt.c ctdt.o nm.out
-endif
+	$(DBDINSTALL) $(MENUS) $(RECTYPES) $(BPTS) $(DBDNAME) *.c 
 
 #  The order of the following dependencies is
 #  VERY IMPORTANT !!!!
@@ -118,19 +123,11 @@ endif
 
 # C++ munching
 %.out : %.o
-	@ $(RM) ctct.o ctdt.c nm.out
-	$(NM) $<  > nm.out
-	$(PERL) $(EPICS_BASE)/bin/$(HOST_ARCH)/munch.pl < nm.out > ctdt.c
+	@ $(RM) ctct.o ctdt.c
+	$(NM) $< | $(MUNCH) > ctdt.c
 	$(COMPILE.c) -traditional ctdt.c
-	$(LINK.cc) $@ $< ctdt.o
-
-# C++ munching for VxWorks
-$(MUNCHNAME):%.munch : %
-	@ $(RM) ctct.o ctdt.c nm.out
-	$(NM) $<  > nm.out
-	$(PERL) $(EPICS_BASE)/bin/$(HOST_ARCH)/munch.pl < nm.out > ctdt.c
-	$(COMPILE.c) -traditional ctdt.c
-	$(LINK.cc) $@ $(LDFLAGS) $< ctdt.o
+	$(LINK.c) $@ $< ctdt.o
+	@ $(RM) ctdt.c ctdt.o
 
 #
 # rename the y.tab.h file only if we
@@ -162,11 +159,13 @@ endif
 	@$(RM) $@
 	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
 
-%.c: %.stt
-	@echo "converting $<
-	ln -s $< $*.st
-	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.st
-	@$(RM) $*.st
+%.c: ../%.stt
+	@echo "preprocessing $*.stt"
+	@$(RM) $*.i
+	$(CPP) $(CPPFLAGS) $(CPPSNCFLAGS) $< > $*.i
+	@echo "converting $*.i"
+	@$(RM) $@
+	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
  
 # Capfast Rules:
 %.db: %.edf
@@ -206,29 +205,29 @@ $(INSTALL_DBD)/%: ../%
 
 %Record.h: %Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 		$(DBDFLAGS)  $<
 
 %Record.h: ../%Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 		$(DBDFLAGS)  $<
 
 menu%.h: menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
 
 menu%.h: ../menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
 
 bpt%.dbd: bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
 
 bpt%.dbd: ../bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
 
 # Patch for old applications
 ifdef USER_DBDFLAGS
@@ -238,8 +237,9 @@ endif
 ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo Expanding dbd
-	@$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbExpand$(EXE) $(DBDFLAGS) $< > $@
+	@$(RM) $@ $@-new
+	$(EPICS_BASE_HOST_BIN)/dbExpand$(EXE) $(DBDFLAGS) $< > $@-new
+	@$(MV) $@-new $@
 endif
 
 $(LIBNAME): $(LIBOBJS)

config/RULES_ARCHS

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 # $Id$
 #
@@ -13,7 +22,6 @@ ACTIONS += install
 ACTIONS += buildInstall 
 ACTIONS += depends 
 ACTIONS += rebuild 
-ACTIONS += browse 
 
 actionPart = $(word 1, $(subst $(DIVIDER), ,$@))
 archPart = $(word 2, $(subst $(DIVIDER), ,$@))

config/RULES_DIRS

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #

config/RULES_TOP

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #

config/Sample.Makefile.Host

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #	Makefile.Host  for  base/src/sample
 #
 #

config/tools/cp.pl

@@ -1,41 +0,0 @@
-#!/usr/bin/perl
-#
-#	UNIX-cp in Perl
-
-use File::Copy;
-use File::Basename;
-
-sub Usage
-{
-	my ($txt) = @_;
-
-	print "Usage:\n";
-	print "\tcp file1 file2\n";
-	print "\tcp file [ file2 file3 ...] directory\n";
-	print "\nError: $txt\n" if $txt;
-
-	exit 2;
-}
-
-# need at least two args: ARGV[0] and ARGV[1]
-Usage("need more args") if $#ARGV < 1;
-
-$target=$ARGV[$#ARGV];
-@sources=@ARGV[0..$#ARGV-1];
-
-if (-d $target)
-{
-	foreach $file ( @sources )
-	{
-        $base=basename($file);
-		copy ($file, "$target/$base");
-	}
-}
-else
-{
-	Usage("Cannot copy more than one source into a single target")
-		if ($#sources != 0);
-	copy ($sources[0], $target);
-}
-
-# EOF cp.pl

config/tools/findBase.pl

@@ -1,13 +0,0 @@
-#!/usr/bin/perl
- 
-use Cwd;
- 
-$dir=cwd();
-#   make sure $dir ends with '/'
-#
-$dir="$dir/" unless ($dir =~ m'/$');
- 
-if ($dir =~ m'(.*(/|\\)base)(/|\\)')
-{
-    print "$1";
-}

config/tools/installEpics.pl

@@ -1,109 +0,0 @@
-#!/usr/bin/perl
-#
-#	InstallEpics.pl
-#
-#	InstallEpics is used within makefiles to copy new versions of
-#	files into a destination directory.
-#	Based on installEpics shell script.
-#
-#	2-4-97 -kuk-
-#
-##########################################################
-
-use Getopt::Std;
-use File::Path;
-use File::Copy;
-
-$tool=$0;
-$tool=~ s'.*[/\\].+'';	# basename
-$mode=0755;
-
-# get command line options
-getopt "m";
-$mode = oct ($opt_m) if ($opt_m);
-
-#	Complain about obsolete options:
-Usage("unknown option given") if ($opt_g or $opt_o or $opt_c or $opt_s);
-
-$num_files = $#ARGV;
-# at least two args required
-Usage ("Nothing to install") if ($num_files < 1);
-
-#	split args in file1 ... fileN target_dir:
-@files=@ARGV[0..$num_files-1];
-$install_dir=$ARGV[$num_files];
-$install_dir =~ s[\\][/]g;	# maybe fix DOS-style path
-$install_dir =~ s[/$][];	# remove trailing '/'
-$install_dir =~ s[//][/]g;	# replace '//' by '/'
-
-#	Do we have to create the directory?
-unless ( (-d $install_dir) || (-l $install_dir) )
-{
-	#	Create dir only if -d option given
-	Usage ("$install_dir does not exist") unless ($opt_d);
-
-	#	Create all the subdirs that lead to $install_dir
-	mkpath ($install_dir, 1, 0777);
-}
-
-foreach $source ( @files )
-{
-	Usage ("Can't find file '$source'") unless -f $source;
-
-	$basename=$source;
-	$basename=~s'.*[/\\]'';
-	$target  = "$install_dir/$basename";
-
-	#	The Win32 filesystem seems to be 'slow',
-	#	i.e. $target may look like 'up to date'
-	#	unless you wait an hour.
-	#	-> skip this test on WIN32 ?
-	#if (-f $target  and  $^O ne "MSWin32")
-	if (-f $target)
-	{
-		if (-M $target  <  -M $source    and
-		    -C $target  <  -C $source)
-		{
-			print "$target is up to date\n";
-			next;
-		}
-		else
-		{
-			#	remove old target, make sure it is deletable:
-			chmod 0777, $target;
-			unlink $target;
-		}
-	}
-
-	# print "Installing $source into $install_dir\n";
-	copy ($source, $target) or die "Copy failed";
-
-	#	chmod 0555 <read-only> DOES work on WIN32, but:
-	#	Another chmod 0777 to make it write- and deletable
-	#	will then fail.
-	#	-> you have to use Win32::SetFileAttributes
-	#	   to get rid of those files from within Perl.
-	#	Because the chmod is not really needed on WIN32,
-	#	just skip it!
-	chmod $mode, $target unless ($^O eq "MSWin32");
-}
-
-sub Usage
-{
-	my ($txt) = @_;
-
-	print "Usage:\n";
-	print "\t$tool [ -m mode ] file ... directory\n";
-	print "\n";
-	print "\t-d             Create non-exising directories\n";
-	print "\t-m mode        Set the mode for the installed file";
-		print " (0755 by default)\n";
-	print "\tfile           Name of file\n";
-	print "\tdirectory      Destination directory\n";
-
-	print "$txt\n" if $txt;
-
-	exit 2;
-}
-
-#	EOF installEpics.pl

config/tools/makeMakefile.pl

@@ -1,31 +0,0 @@
-#!/usr/bin/perl
-#
-#	makeMakefile.pl
-#
-#	called from RULES_ARCHS
-#
-#
-#	Usage: perl makeMakefile.pl O.*-dir Makefile-Type
-
-$dir = $ARGV[0];
-$type= $ARGV[1];
-$makefile="$dir/Makefile";
-
-if ($dir =~ m'O.(.+)')
-{
-	$t_a = $1;
-}
-else
-{
-	die "Cannot extract T_A from $dir";
-}
-
-mkdir ($dir, 0777)  unless -d $dir;
-
-open OUT, "> $makefile"  or die "Cannot create $makefile";
-print OUT "T_A=$t_a\n";
-print OUT "BUILD_TYPE=$type\n";
-print OUT "include ../Makefile.$type\n";
-close OUT;
-
-#	EOF makeMakefile.pl

config/tools/mkdir.pl

@@ -1,23 +0,0 @@
-#!/usr/bin/perl
-#
-#	UNIX-mkdir in Perl
-#
-#	-p option generates full path to given dir
-
-use File::Path;
-use Getopt::Std;
-getopt "";
-
-foreach $dir ( @ARGV )
-{
-	if ($opt_p)
-	{
-		mkpath ($dir) or die "Cannot make directory $dir";
-	}
-	else
-	{
-		mkdir ($dir, 0777) or die "Cannot make directory $dir";
-	}
-}
-
-# EOF mkdir.pl

config/tools/munch.pl

@@ -1,57 +0,0 @@
-eval 'exec perl -S $0 ${1+"$@"}'  # -*- Mode: perl -*-
-    if $running_under_some_shell; # makeConfigAppInclude.pl
-
-# Creates a ctdt.c file of c++ static constructors and destructors.
-#  $Id$
-
-@ctorlist = ();
-@dtorlist = ();
-
-while ($line = <STDIN>)
-{
-    next if ($line =~ /__?GLOBAL_.F.+/);
-    next if ($line =~ /__?GLOBAL_.I._GLOBAL_.D.+/);
-    if ($line =~ /__?GLOBAL_.D.+/) {
-        ($adr,$type,$name) = split ' ',$line,3;
-        chop $name;
-        $name =~ s/^__/_/;
-        next if ( $name =~ /^__?GLOBAL_.D.*.\.cpp/ );
-        next if ( $name =~ /^__?GLOBAL_.D.\.\./ );
-        @dtorlist = (@dtorlist,$name);
-    };
-    if ($line =~ /__?GLOBAL_.I.+/) {
-        ($adr,$type,$name) = split ' ',$line,3;
-        chop $name;
-        $name =~ s/^__/_/;
-        next if ( $name =~ /^__?GLOBAL_.I.*.\.cpp/ );
-        next if ( $name =~ /^__?GLOBAL_.I.\.\./ );
-        @ctorlist = (@ctorlist,$name);
-    };
-}
-
-foreach $ctor (@ctorlist)
-{
-    printf "void %s();\n",$ctor;
-}
-
-print "extern void (*_ctors[])();\n";
-print "void (*_ctors[])() = {\n";
-foreach $ctor (@ctorlist)
-{
-    printf "        %s,\n",$ctor;
-}
-print "        0};\n";
-
-
-foreach $dtor (@dtorlist)
-{
-    printf "void %s();\n",$dtor;
-}
-
-print "extern void (*_ctors[])();\n";
-print "void (*_dtors[])() = {\n";
-foreach $dtor (@dtorlist)
-{
-    printf "        %s,\n",$dtor;
-}
-print "        0};\n";

config/tools/rm.pl

@@ -1,36 +0,0 @@
-#!/usr/bin/perl
-#
-#	UNIX-rm in Perl
-
-use File::Path;
-use File::Find;
-use Getopt::Std;
-
-getopt "";
-
-foreach $arg ( @ARGV )
-{
-	next unless -e $arg;
-
-	if (-d $arg)
-	{
-		if ($opt_r and $opt_f)
-		{
-			rmtree $arg;
-		}
-		else
-		{
-			rmdir ($arg) or die "Cannot delete $arg";
-		}
-        if (-d $arg)
-        {
-            die "Failed to delete $arg";
-        }
-	}
-	else
-	{
-		unlink ($arg) or die "Cannot delete $arg";
-	}
-}
-
-# EOF rm.pl

configure/CONFIG

@@ -1,99 +0,0 @@
-#
-#  $Id$
-#
-#  The developer may edit this file.
-# assume T_A is the host arch if not specified
-
-#
-#  Common build definitions
-#
-
-ifndef CONFIG
-CONFIG = $(TOP)/configure
-endif
-
--include $(CONFIG)/os/CONFIG_COMPAT
-
--include $(CONFIG)/RELEASE
--include $(CONFIG)/RELEASE.$(EPICS_HOST_ARCH)
-
-include $(CONFIG)/CONFIG_COMMON
-
-#  EPICS-specific build options
-#
-include $(CONFIG)/CONFIG_BASE
-include $(CONFIG)/CONFIG_BASE_VERSION
-
-#  Site-specific build options
-#
-include $(CONFIG)/CONFIG_SITE
-
-#  Host architecture specific definitions
-#
-include $(CONFIG)/os/CONFIG.$(EPICS_HOST_ARCH).Common
--include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
-
-
-ifdef T_A
-
-#  Cross compile specific definitions
-#
-ifneq ($(EPICS_HOST_ARCH),$(T_A))
-include $(CONFIG)/CONFIG.CrossCommon
-endif
-
-#  Target architecture specific definitions
-#
--include $(CONFIG)/os/CONFIG.Common.$(T_A)
-
-#  Host-Target architecture specific definitions
-#
--include $(CONFIG)/os/CONFIG.$(EPICS_HOST_ARCH).$(T_A)
-
-#  Site specific target and host-target definitions
-#
--include $(CONFIG)/os/CONFIG_SITE.Common.$(T_A)
--include $(CONFIG)/os/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
-
-endif
-
-#  User specific definitions
-#
--include $(HOME)/configure/CONFIG
--include $(HOME)/os/configure/CONFIG.Host.$(HOST_ARCH)
--include $(HOME)/os/configure/CONFIG.Host.$(EPICS_HOST_ARCH)
--include $(HOME)/os/configure/CONFIG.$(HOST_ARCH).Common
--include $(HOME)/os/configure/CONFIG.$(EPICS_HOST_ARCH).Common
-ifdef T_A
--include $(HOME)/configure/CONFIG.$(OS_CLASS)
--include $(HOME)/configure/CONFIG.Target.$(T_A)
--include $(HOME)/configure/CONFIG.Common.$(T_A)
--include $(HOME)/configure/CONFIG.$(HOST_ARCH).$(T_A)
--include $(HOME)/configure/CONFIG.$(EPICS_HOST_ARCH).$(T_A)
--include $(HOME)/configure/os/CONFIG.Target.$(T_A)
--include $(HOME)/configure/os/CONFIG.Common.$(T_A)
--include $(HOME)/configure/os/CONFIG.$(HOST_ARCH).$(T_A)
--include $(HOME)/configure/os/CONFIG.$(EPICS_HOST_ARCH).$(T_A)
-endif
-
-#  All options
-#   may be overridden here.
-#
-# EXAMPLES
-# --------
-#  Build client objects statically ?  must be either YES or NO
-#STATIC_BUILD=NO
-#  Host build optimization,   must be either YES or NO
-#HOST_OPT=YES
-#  Cross build optimization,  must be either YES or NO
-#CROSS_OPT=YES
-#  Generate Verbose Compiler Warnings for host build,  must be either YES or NO
-#HOST_WARN=YES
-#  Generate Verbose Compiler Warnings for cross compile builds,  must be either YES or NO
-#CROSS_WARN=YES
-#etc.
-
-#CROSS_COMPILER_TARGET_ARCHS=vxWorks-68040
-#CMPLR=STRICT
-#CXXCMPLR=STRICT
-