Updated release number.

while in the casStrmClient destructor

LICENSE

@@ -0,0 +1,109 @@
+Copyright (c) 2002 University of Chicago and The Regents of the University
+of California. All rights reserved.
+
+EPICS BASE is distributed subject to the following license agreement:
+
+ SOFTWARE LICENSE AGREEMENT
+ Software: EPICS BASE
+ Versions: 3.13.7 and higher
+
+IMPORTANT! READ CAREFULLY: EPICS BASE is NOT distributed as Open Source.
+This is a legal agreement between you (in your capacity as an individual
+and as an agent for your company, institution or other entity) and The
+University of Chicago, as Operator of Argonne National Laboratory under
+Contract W-31-109-ENG-38 with the U.S. Department of Energy ("Argonne"),
+and The Regents of the University of California, as Operator of Los Alamos
+National Laboratory under Contract W-7405-ENG-36 with the U.S. Department
+of Energy ("Los Alamos").
+
+ 1. The "Software", below, refers to EPICS BASE (in either source code, or
+    binary form and accompanying documentation). Each licensee is
+    addressed as "you" or "Licensee."
+
+ 2. Argonne and Los Alamos are copyright holders in the Software. The
+    copyright holders and their third-party licensors hereby grant
+    Licensee a royalty-free nonexclusive license, subject to the
+    limitations stated herein and U.S. Government license rights.
+
+ 3. You may modify and make a copy or copies of the Software for use
+    within your organization, if you meet the following conditions:
+      a. Copies in source code must include the copyright notice and this
+         Software License Agreement.
+      b. Copies in binary form must include the copyright notice and this
+         Software License Agreement in the documentation and/or other
+         materials provided with the copy.
+
+ 4. You may modify a copy or copies of the Software or any portion of it,
+    thus forming a work based on the Software, and distribute copies of
+    such work outside your organization, if you meet all of the following
+    conditions:
+      a. Copies in source code must include the copyright notice and this
+         Software License Agreement;
+      b. Copies in binary form must include the copyright notice and this
+         Software License Agreement in the documentation and/or other
+         materials provided with the copy;
+      c. Modified copies and works based on the Software must carry
+         prominent notices stating that you changed specified portions of
+         the Software; and
+      d. Prior to sending a copy or modified copy of the Software to any
+         person or entity outside your organization you must verify with
+         Argonne that the intended recipient of the Software has executed
+         a license with Argonne for EPICS BASE. (See
+         http://www.aps.anl.gov/epics/license/verify.php for information
+         on how to contact Argonne.)
+
+ 5. THE SOFTWARE INCLUDES PORTIONS WHICH MAY REQUIRE SOME FORM OF EXPORT
+    CONTROL LICENSE FROM THE U.S. GOVERNMENT. FAILURE TO OBTAIN SUCH
+    EXPORT CONTROL LICENSE MAY RESULT IN CRIMINAL LIABILITY UNDER U.S.
+    LAWS.
+
+ 6. Portions of the Software resulted from work developed under a U.S.
+    Government contract and are subject to the following license: the
+    Government is granted for itself and others acting on its behalf a
+    paid-up, nonexclusive, irrevocable worldwide license in this computer
+    software to reproduce, prepare derivative works, and perform publicly
+    and display publicly.
+
+ 7. WARRANTY DISCLAIMER. THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT WARRANTY
+    OF ANY KIND. THE COPYRIGHT HOLDERS, THEIR THIRD PARTY LICENSORS, THE
+    UNITED STATES, THE UNITED STATES DEPARTMENT OF ENERGY, AND THEIR
+    EMPLOYEES: (1) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+    BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+    FOR A PARTICULAR PURPOSE, TITLE OR NONINFRINGEMENT, (2) DO NOT ASSUME
+    ANY LEGAL LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS,
+    OR USEFULNESS OF THE SOFTWARE, (3) DO NOT REPRESENT THAT USE OF THE
+    SOFTWARE WOULD NOT INFRINGE PRIVATELY OWNED RIGHTS, (4) DO NOT WARRANT
+    THAT THE SOFTWARE WILL FUNCTION UNINTERRUPTED, THAT IT IS ERROR FREE
+    OR THAT ANY ERRORS WILL BE CORRECTED.
+
+ 8. LIMITATION OF LIABILITY. IN NO EVENT WILL THE COPYRIGHT HOLDERS, THEIR
+    THIRD PARTY LICENSORS, THE UNITED STATES, THE UNITED STATES DEPARTMENT
+    OF ENERGY, OR THEIR EMPLOYEES: BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
+    CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR NATURE,
+    INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR LOSS OF DATA, FOR ANY
+    REASON WHATSOEVER, WHETHER SUCH LIABILITY IS ASSERTED ON THE BASIS OF
+    CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), OR
+    OTHERWISE, EVEN IF ANY OF SAID PARTIES HAS BEEN WARNED OF THE
+    POSSIBILITY OF SUCH LOSS OR DAMAGES.
+
+________________________________________________________________________
+
+This software is in part copyrighted by the BERLINER SPEICHERRING
+GESELLSCHAFT FUER SYNCHROTRONSTRAHLUNG M.B.H. (BESSY),
+BERLIN, GERMANY.
+
+In no event shall BESSY be liable to any party for direct,
+indirect, special, incidental, or consequential damages arising
+out of the use of this software, its documentation, or any
+derivatives thereof, even if BESSY has been advised of the
+possibility of such damage.
+
+BESSY specifically disclaims any warranties, including, but not
+limited to, the implied warranties of merchantability, fitness for
+a particular purpose, and non-infringement.  This software is
+provided on an "as is" basis, and BESSY has no obligation to
+provide maintenance, support, updates, enhancements, or
+modifications.
+________________________________________________________________________
+
+

Makefile

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 # $Id$
 #
@@ -5,15 +14,7 @@
 TOP = .
 include $(TOP)/configure/CONFIG
 
-DIRS += config configure src
+DIRS += config config/tools configure src
 
 include $(TOP)/configure/RULES_TOP
 
-release::
-	@echo TOP: Creating Release...
-	@$(TOOLS)/MakeRelease
-
-built_release::
-	@echo TOP: Creating Fully Built Release...
-	@$(TOOLS)/MakeRelease -b $(INSTALL_LOCATION)
-	

README

@@ -1,414 +1,24 @@
-README 
+---------------------------------------------------------
+EPICS Base - the central core of a control system toolkit
+---------------------------------------------------------
 
-                  Installation Instructions
+Copyright (c) 2002 The University of Chicago, as Operator
+of Argonne National Laboratory.
+Copyright (c) 2002 The Regents of the University of
+California, as Operator of Los Alamos National Laboratory.
 
-                           EPICS base
+EPICS Base Versions 3.13.7 and higher are distributed
+subject to a Software License Agreement found in the
+file LICENSE that is included with this distribution.
 
-                      Release 3.14.0beta1
+---------------------------------------------------------
 
-What is EPICS base?
-
-     The Experimental Physics and Industrial Control Systems (EPICS) is
-     an extensible set of software components and tools with which
-     application developers can create a control system. This control system
-     can be used to control accelerators, detectors, telescopes, or other
-     scientific experimental equipment. EPICS base is the set of core
-     software, i.e. the components of EPICS without which EPICS would not
-     function. EPICS base allows an arbitrary number of target systems,
-     IOCs (input/output controllers), and host systems, OPIs (operator
-     interfaces) of various types.
-
-What is new in this release?
-
-     This version of EPICS base contains significant changes and offers
-     major improvements in functionality over previous versions. Please
-     check the RELEASE_NOTES file in the distribution for description of
-     changes and release migration details.
-
-Copyright
-
-     Please review the COPYRIGHT* files included in the distribution for
-     legal terms of usage.
-
-Supported platforms
-
-     Currently this version of EPICS base has been built on the following
-     hosts for the following targets. If you are trying to build EPICS base on a
-     different host or for a different target machine you must get the proper
-     host/target cross compiler and header files and you will have to create
-     and add the appropriate new configure files to the
-     base/configure/os/directory. You can start by copying existing
-     configuration files in the configure/os directory and then make changes
-     for your new platforms.
-
-     Host platforms (operating system - architecture - <alternate c++
-     compiler>) 
-
-         solaris-sparc 
-         solaris-sparc-gnu 
-         linux-x86 
-         win32-x86 
-         win32-x86-borland
-
-     Cross compile target platforms (operating system - architecture)
-
-         vxWorks-486 
-         vxWorks-68040 
-         vxWorks-68040lc 
-         vxWorks-68060 
-         vxWorks-ppc603 
-         vxWorks-ppc604 
-         vxWorks-pentium 
-         RTEMS-gen68360 
-         RTEMS-mvme167 
-         RTEMS-pc386
-
-Supported compilers
-
-     This version of EPICS base has been built and tested using the host
-     vendor's C and C++ compilers as well as the GNU gcc and g++
-     compilers. The GNU cross-compilers have been used for all
-     cross-compiled targets. You may need the host vendor's C++ compiler
-     in your search path to do EPICS builds. Check definitions of ACC and
-     CCC in base/configure/os/CONFIG.<host>.<host> or the definitions
-     for GCC and G++ if ANSI=GCC and CPLUSPLUS=GCC are specified
-     in CONFIG_SITE.
-
-Software requirements
-
-     GNU make 
-     You must use GNU make, gnumake, for any EPICS builds.  Set your
-     path so that a gnumake version 3.70 or later is available. 
-
-     Perl 
-     You must have perl version 5.0 or later installed. The configure files do
-     not specify the perl full pathname.  You need the perl executable in
-     your search path. 
-
-     Unzip and tar (Winzip on WIN32 systems) 
-     You must have tools available to unzip and untar the EPICS base
-     distribution file. 
-
-     Tornado 2.0 
-     You must have Tornado 2.0 installed if any of your target systems are
-     vxWorks systems.  Tornado 2.0 provides the cross-compiler and header
-     files needed to build for these target systems. The full path location to
-     Tornado 2.0 must be specified in the base/configure/RELEASE or
-     base/configure/RELEASE.<hostarch> file. You will also need one or
-     more board support packages. Consult the vxWorks documentation for
-     details. 
-
-     Optional GNU compiler requirement for solaris-sparc  and
-     win32-x86 hosts 
-     If you have state notation language source files (*.st files) which require
-     c preprocessing before conversion to c source,  gcc must be in your path.
-
-Host system storage requirements
-
-     The GNU zipped tar file is approximately 1.4 MB in size. The unzipped
-     untarred distribution source tree is approximately 6 MB. The build
-     created files for each host take approximately 40 MB and the build
-     created files for each target take approximately 10 MB.
-
-Documentation
-
-     EPICS documentation is available on the WWW via the EPICS home
-     page at APS:  URL http://www.aps.anl.gov/Epics
-
-     This README.htm is in the base distribution file and will be available
-     on the IOC software R3.14 EPICS WWW page which can be accessed
-     from the APS EPICS home page.
-
-WWW pages
-
-     EPICS home page at APS
-
-         http://www.aps.anl.gov/epics
-
-     Other WWW sites
-
-         Additional information on EPICS can be found at the
-         various other WWW links on the EPICS home page at APS.
-
-     Mailing Lists
-
-         There are five EPICS mailing lists provided by APS. See The
-         EPICS home page for subscription instructions.
-
-Directory Structure
-
-     Distribution directory structure:
-
-     base                         Root directory of the base istribution 
-     base/config                  R3.13 compatibility build configuration files 
-     base/config/tools            Perl and shell scripts used in the R3.13 build 
-     base/configure               Operating system independent build config files 
-     base/configure/os            Operating system dependent build config files 
-     base/configure/tools         Perl and shell scripts used in the build 
-     base/copyright               Text files describing software copyrights 
-     base/src                     All epics base source code in subdirectories 
-     base/src/as                  Access security 
-     base/src/bpt                 Break point table 
-     base/src/ca                  Channel access 
-     base/src/cas                 Channel access server 
-     base/src/db                  Database access 
-     base/src/db/test             Database access tests 
-     base/src/dbStatic            Static database access 
-     base/src/dbtools             Database dbLoadTemplate tools 
-     base/src/dev                 Device support (softDev and testDev) 
-     base/src/gdd                 General data descriptor 
-     base/src/iocsh               Ioc shell command interpreter 
-     base/src/libCom              General purpose library code in subdirectories 
-     base/src/libCom/bucketLib    Hash bucket 
-     base/src/libCom/calc         Algebraic expression interpreter 
-     base/src/libCom/cvtFast      Fast number to string conversion 
-     base/src/libCom/cxxTemplates C++ templates and templates tests 
-     base/src/libCom/dbmf         Memory management for frequent alloc/free 
-     base/src/libCom/ellLib       EPICS double linked list 
-     base/src/libCom/env          Default EPICS environment settings 
-     base/src/libCom/error        Error handling definitions and routines 
-     base/src/libCom/fdmgr        File descriptor manager 
-     base/src/libCom/freeList     Memory management using free lists 
-     base/src/libCom/gpHash       General purpose hash table 
-     base/src/libCom/logClient    Logging client 
-     base/src/libCom/macLib       Macro substitution handler 
-     base/src/libCom/misc         Miscellaneous utilities 
-     base/src/libCom/osi          Operating system independent code 
-     base/src/libCom/osi/os       Operating system dependant code in subdirectories 
-     base/src/libCom/taskwd       Task watchdog 
-     base/src/libCom/test         Test tools (timer, semBinary, semMutex,fdmgr, ?) 
-     base/src/libCom/timer        Timer 
-     base/src/libCom/tsDefs       R3.13 time stamp definitions and routines 
-     base/src/libCom/ring         ringPointer: First in first out circular buffers 
-     base/src/libCom/cppStd       epicsList: Lists of pointers to objects 
-     base/src/makeBaseApp         Perl tool+templates to create ioc app dvl tree 
-     base/src/makeBaseExt         Perl tool+templates to create extension dvl tree 
-     base/src/misc                Miscellaneous (coreRelease, iocInit, asSub*) 
-     base/src/rec                 Record support 
-     base/src/registry            EPICS support function registry 
-     base/src/rsrv                Channel access ioc resource server library 
-     base/src/toolsComm           Code for the build tools antelope and e_flex 
-     base/src/util                Utilities (ca_test, iocLogServer, startCArepeater) 
-     base/src/vxWorks             R3.13 compatibility code specific to vxWorks 
-     base/startup                 Scripts for setting up path and environment 
-
-     Install directories created by the build: 
-
-     base/bin                     Installed scripts and executables in subdirs 
-     base/lib                     Installed libraries in arch subdirectories 
-     base/dbd                     Installed data base definitions 
-     base/include                 Installed header files 
-     base/include/os              Installed os specific header files 
-     base/templates               Installed templates 
-
-Build related components
-
-     base/README* files 
-     README.htm           Instructions for setup and building epics base 
-                          (i.e. this document) 
-     README.WIN32         Microsoft WIN32 specific instructions 
-     README.cxxTemplates  Information about C++ templates in EPICS base 
-     README.niCpu030      NI cpu030 specific instructions 
-       
-     base/startup directory - contains scripts to set environment and path 
-     EpicsHostArch       c shell script to set EPICS_HOST_ARCH env variable 
-     EpicsHostArch.pl    perl script to set EPICS_HOST_ARCH env variable 
-     Site.profile        bourne shell script to set path and env variables 
-     Site.cshrc          c shell script to set path and env variables 
-     borland.bat         WIN32 bat file to set path and env variables 
-     win32.bat           WIN32 bat file to set path and env variables 
-       
-     base/configure  directory - contains build definitions and rules 
-     CONFIG.CrossCommon    Cross build definitions 
-     CONFIG.gnuCommon      Gnu compiler build definitions for all archs 
-     CONFIG_ADDONS         Definitions for <osclass> and DEFAULT options 
-     CONFIG_BASE           EPICS base tool and location definitions 
-     CONFIG_BASE_VERSION   Definitions for EPICS base version number 
-     CONFIG_COMMON         Definitions common to all builds 
-     CONFIG_ENV            Definitions of EPICS environment variables 
-     CONFIG_SITE           Site specific make defintions 
-     CONFIG_SITE_ENV       Site defaults for EPICS environment variables 
-     CONFIG                Includes configure files and allows variable overrides 
-     RELEASE               Location of external products such as Tornado II 
-     RULES                 Includes appropriate rules file 
-     RULES.Db              Rules for database and database definition files 
-     RULES_ARCHS           Definitions and rules for building architectures 
-     RULES_BUILD           Build and install rules and definitions 
-     RULES_DIRS            Definitions and rules for building subdirectories 
-     RULES_JAVA            Definitions and rules for java jars and classes 
-     RULES_TOP             Rules specific to a <top> dir (uninstall and tar) 
-     Sample.Makefile       Sample makefile with comments 
-       
-     base/configure/os directory - contains os-arch specific definitions 
-     CONFIG.<host>.<target>      Specific host-target build definitions 
-     CONFIG.Common.<target>      Specific target definitions for all hosts 
-     CONFIG.<host>.Common        Specific host definitions for all targets 
-     CONFIG.UnixCommon.Common    Definitions for Unix hosts and all target 
-     CONFIG.<host>.vxWorksCommon Specific host definitions for all vx targets 
-     CONFIG_COMPAT               R3.13 arch compatibility definitions 
-     CONFIG_SITE.<host>.<target> Site specific host-target definitions 
-     CONFIG_SITE.Common.<target> Site specific target defs for all hosts 
-     CONFIG_SITE.<host>.Common   Site specific host defs for all targets 
-       
-     base/configure/tools directory - contains Perl scripts used for the build 
-     MakeReleae              Unix shell script to create a release tar file
-     convertRelease.pl       Performs consistancy checks on RELEASE files
-     cp.pl                   This Perl script copies an existing file 
-     installEpics.pl         Installs built files into install directories. 
-     makeDependsTargets.pl   Creates targets of include dependency files
-     makeMakefile.pl         Creates a Makefile in O.<arch> dirs 
-     makeMakefileInclude.pl  Creates file to be included by Makefile 
-     mkdir.pl                Creates a directory (like Unix mkdir) 
-     mkmf.pl                 Generates dependencies from include stmnts 
-     munch.pl                Creates a ctdt.c file for vxWorks targets 
-     mv.pl                   Renames an existing file. 
-     replaceVAR.pl           Changes CapFast VAR(xxx) to $(xxx) notation 
-     rm.pl                   Quietly removes an existing file.
-
-Building EPICS base (Unix and Win32)
-
-     Unpack file 
-
-         Unzip and untar the distribution file. Use WinZip on
-         Windows systems.
-
-     Set environment variable 
-
-         Files in the base/startup directory have been provided to help
-         set required path and other environment variables .
-
-         EPICS_HOST_ARCH
-         Before you can build or use EPICS R3.14, the environment
-         variable EPICS_HOST_ARCH must be defined. A perl
-         script EpicsHostArch.pl in the base/startup directory has
-         been provided to help set EPICS_HOST_ARCH. You should
-         have EPICS_HOST_ARCH set to your host operating
-         system followed by a dash and then your host architecture,
-         e.g. solaris-sparc. If you are not using the OS vendor's
-         c/c++ compiler for host builds, you will need another dash
-         followed by the alternate compiler name (e.g. "-gnu" for GNU
-         c/c++ compilers on a solaris host or "-borland" for Borland
-         c/c++ compilers on a WIN32 host) .  See configure/CONFIG_SITE 
-         for a list of supported EPICS_HOST_ARCH values.
-
-         PERLLIB
-         On WIN32, some versions of Perl require that  the
-         environment variable PERLLIB be set to <perl directory
-         location>.
-
-         PATH
-         As already mentioned, you must have the perl executable
-         and you may need C and C++ compilers in your search path.
-         For building base you also must have echo in your search
-         path. For Unix host builds you also need touch, cpp, cp, rm,
-         mv, and mkdir in your search path and /bin/chmod must
-         exist. On some Unix systems you may also need ar and ranlib
-         in your path, and the c compiler may require ld in your path. 
-
-         Unix LD_LIBRARY_PATH
-         If you plan to build EPICS base shared libraries instead of
-         archive libraries, on Unix systems you will need to add 
-         fullpathname to $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) to
-         your LD_LIBRARY_PATH environment variable. 
-
-         Win32 PATH
-         On WIN32 systems, building shared libraries is the default
-         setting and you will need to add  fullpathname to
-         $(INSTALL_LOCATION)/bin/$(EPICS_HOST_ARCH) to your path.
-         Building shared libraries is determined by the value of the
-         macro SHARED_LIBRARIES in CONFIG_SITE (either YES or NO).
-
-
-     Do site-specific build configuration 
-
-         Site configuration 
-         To configure EPICS, you may want to modify the default
-         definitions in the following files: 
-
-              configure/CONFIG_SITE     Build choices. Specify target archs. 
-              configure/CONFIG_SITE_ENV Environment variable  defaults 
-              configure/RELEASE         TORNADO 2 full path location
-
-         Host configuration 
-         To configure each host system, you may override the default
-         definitions by adding a new file with override definitions into
-         the configure/os directory. The new file should have the
-         same name as the distribution file to be overridden except
-         with CONFIG in the name changed to CONFIG_SITE. 
-
-              configure/os/CONFIG.<host>.<host> - Host build settings 
-              configure/os/CONFIG.<host>.Common - Host cross build settings
-
-         Target configuration 
-         To configure each target system, you may override the
-         default definitions by adding a new file with override
-         definitions into the configure/os directory. The new file
-         should have the same name as the distribution file to be
-         overridden except with CONFIG in the name replaced by
-         CONFIG_SITE. 
-
-              configure/os/CONFIG.Common.<target> - Target cross settings
-              configure/os/CONFIG.<host>.<target> - Host-target settings
-
-         R3.13 compatibility configuration 
-         To configure EPICS base for building with R3.13 extensions
-         and ioc applications, you must modify the default definitions
-         in the base/config/CONFIG_SITE* files to agree with definitions
-         you made in base/configure and base/configure/os files.
-
-     Build EPICS base
-
-         After configuring the build you should be able to build
-         EPICS base by issuing the following commands in the
-         distribution's root directory (base) 
-
-              gnumake clean uninstall 
-              gnumake
-
-         The command "gnumake clean uninstall" will remove all
-         files and directories generated by a previous build. The
-         command "gnumake" will build and install everything for
-         the configured host and targets. 
-         It is recommended that you do a "gnumake clean uninstall"
-         at the root directory of an EPICS  directory structure before
-         each complete rebuild to ensure that all components will be
-         rebuilt.
-
-Multiple host platforms
-
-     You can build using a single EPICS directory structure on multiple host
-     systems and for multiple cross target systems. The intermediate and
-     binary files generated by the build will be created in separate
-     subdirectories and installed into the appropriate separate host/target
-     install directories. EPICS executables and perl scripts are installed 
-     into the $(INSTALL_LOCATION)/bin/<arch> directories. Libraries are
-     installed into $(INSTALL_LOCATION)/lib/<arch>. The default
-     definition for $(INSTALL_LOCATION) is $(TOP) which is the root
-     directory in the distribution directory structure, base. Created object
-     files are stored in O.<arch> source subdirectories, This allows objects
-     for multiple cross target architectures to be maintained at the same
-     time. To build EPICS base for a specific host/target combination you
-     must have the proper host/target c/c++ cross compiler and target header
-     files and the base/configure/os directory must have the appropriate
-     configure files.
-
-Example application and extension
-
-     A perl tool, makeBaseApp.pl is included in the distribution file. This
-     script will create a sample application that can be built and then
-     executed to try out this release of base. Also, a perl script,
-     makeBaseExt.pl, is included in the distribution file. This script will
-     create a sample extension that can be built and executed. The
-     makeBaseApp.pl and makeBaseExt.pl scripts are installed into the
-     install location bin/<hostarch> directory during the base build.
-
-     Instructions for building and executing the 3.14 example application
-     can be found in the section "Example Application" of Chapter 2, "New
-     Features for 3.14", in the  "IOC Application Developer's Guide
-     R3.14.0beta1". The "Example Application" section briefly explains
-     how to create and build an example application in a user created <top>
-     directory. It also explains how to run the example application on a
-     vxWorks ioc or a host system and run an example channel access client
-     on the host system.
+Installation and release information can be found in the
+various files in the documentation subdirectory.
 
+Additional information about EPICS including mailing list
+archives and subscription instructions, documentation and
+training materials, additional components, links to other
+websites etc. is available on the EPICS home page at
+	http://www.aps.anl.gov/epics/
 

READMEbuildingR3.13AppsWithR3.14.html

@@ -1,298 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="ProgId" content="Word.Document">
-   <meta name="Generator" content="Microsoft Word 9">
-   <meta name="Originator" content="Microsoft Word 9">
-   <meta name="GENERATOR" content="Mozilla/4.77 [en] (X11; U; SunOS 5.8 sun4u) [Netscape]">
-   <title>Instruction on building existing R3</title>
-<link rel=File-List href="./READMEbuildingR3.13AppsWithR3.14_files/filelist.xml">
-<!--[if gte mso 9]><xml>
- <o:DocumentProperties>
-  <o:LastAuthor>Jba</o:LastAuthor>
-  <o:Revision>3</o:Revision>
-  <o:TotalTime>4</o:TotalTime>
-  <o:Created>2000-10-25T19:43:00Z</o:Created>
-  <o:LastSaved>2000-10-25T19:47:00Z</o:LastSaved>
-  <o:Pages>1</o:Pages>
-  <o:Company>Argonne National Laboratory</o:Company>
-  <o:Lines>1</o:Lines>
-  <o:Paragraphs>1</o:Paragraphs>
-  <o:Version>9.2720</o:Version>
- </o:DocumentProperties>
-</xml><![endif]-->
-<!--[if gte mso 9]><xml>
- <w:WordDocument>
-  <w:DisplayHorizontalDrawingGridEvery>0</w:DisplayHorizontalDrawingGridEvery>
-  <w:DisplayVerticalDrawingGridEvery>0</w:DisplayVerticalDrawingGridEvery>
-  <w:UseMarginsForDrawingGridOrigin/>
-  <w:Compatibility>
-   <w:FootnoteLayoutLikeWW8/>
-   <w:ShapeLayoutLikeWW8/>
-   <w:AlignTablesRowByRow/>
-   <w:ForgetLastTabAlignment/>
-   <w:LayoutRawTableWidth/>
-   <w:LayoutTableRowsApart/>
-  </w:Compatibility>
- </w:WordDocument>
-</xml><![endif]-->
-<style>
-<!--
- /* Font Definitions */
-@font-face
-	{font-family:"MS Mincho";
-	panose-1:2 2 6 9 4 2 5 8 3 4;
-	mso-font-alt:"\FF2D\FF33 \660E\671D";
-	mso-font-charset:128;
-	mso-generic-font-family:roman;
-	mso-font-pitch:fixed;
-	mso-font-signature:-1610612033 1757936891 16 0 131231 0;}
-@font-face
-	{font-family:"\@MS Mincho";
-	mso-font-charset:128;
-	mso-generic-font-family:roman;
-	mso-font-pitch:fixed;
-	mso-font-signature:1 134676480 16 0 131072 0;}
- /* Style Definitions */
-p.MsoNormal, li.MsoNormal, div.MsoNormal
-	{mso-style-parent:"";
-	margin:0in;
-	margin-bottom:.0001pt;
-	mso-pagination:widow-orphan;
-	font-size:10.0pt;
-	font-family:"Times New Roman";
-	mso-fareast-font-family:"Times New Roman";}
-p.MsoPlainText, li.MsoPlainText, div.MsoPlainText
-	{margin:0in;
-	margin-bottom:.0001pt;
-	mso-pagination:widow-orphan;
-	font-size:10.0pt;
-	font-family:"Courier New";
-	mso-fareast-font-family:"Times New Roman";}
-@page Section1
-	{size:8.5in 11.0in;
-	margin:1.0in 66.0pt 1.0in 66.0pt;
-	mso-header-margin:.5in;
-	mso-footer-margin:.5in;
-	mso-paper-source:0;}
-div.Section1
-	{page:Section1;}
--->
-</style>
-</head>
-<body lang="EN-US" style="tab-interval:.5in">
-
-<center>
-<h2>
-Building EPICS R3.13 applications with R3.14.0beta1 base</h2></center>
-
-<p><br>This document describes how to modify a R3.13 vxWorks application
-so that it builds with release R3.14.0beta1.&nbsp; It describes an easy
-way to modify applications subject to the following restrictions:
-<ul>
-<li>
-The application still uses config rules rather than the configure rules
-which are new to release 3.14.</li>
-
-<li>
-The OSI (Operating System Independent) features of R3.14 are not available,
-i.e. iocCore products can only be build for vxWorks.</li>
-
-<li>
-Once the application is changed to build with base R3.14, it will not build
-with earlier base releases.</li>
-</ul>
-Ultimately applications should be converted to use the new configure rules
-so that the OSI features are available.
-<h3>
-<b>Gnumake clean uninstall</b></h3>
-
-<blockquote>At the top of the application execute:
-<pre>"<tt>gnumake clean uninstall</tt>"</pre>
-to remove all files and directories created by earlier builds.</blockquote>
-
-<h3>
-Update RELEASE</h3>
-
-<blockquote>Change&nbsp; the <tt>EPICS_BASE</tt> definition to point to
-the R3.14 base release. All hardware support and some soft support is now
-unbundled. For example the sequencer is unbundled. You must obtain and
-build all required unbundled products before you can build the application.
-The location of each unbundled product must be specified in &lt;top>/config/RELEASE.</blockquote>
-
-<h3>
-Update target arch definitions</h3>
-
-<blockquote>Change any target arch specification in config/CONFIG to new
-R3.14 target arch specification. Look in the R3.14 base/bin directory to
-see the target arch names.
-<p>For example, in config/CONFIG change
-<pre>CROSS_COMPILER_TARGET_ARCHS = mv167</pre>
-to
-<pre>CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040</pre>
-In the iocBoot/*/Makefile files, change
-<pre>ARCH=&lt;old arch name></pre>
-to
-<pre>ARCH=&lt;new arch name></pre>
-and do a "<tt>gnumake"</tt> in the iocBoot directory to update the cdCommands
-files.</blockquote>
-
-<h3>
-State Notation Language changes</h3>
-
-<blockquote>snc is no longer in base. If snc is used in your application,
-you must download and build the seq module with baseR3.14.0beta1. See the
-Application Developer's Guide to see how to build sequence programs.</blockquote>
-
-<blockquote>Change
-<pre>INSTALLS=seq</pre>
-to
-<pre>LIBOBJS += $(SEQ_BIN)/seqLibrary.o</pre>
-
-<p><br>in application src/Makefile.Vx files to link seq library into your
-application library,.
-<br>Also add
-<pre>SEQ=&lt;full path to seq module directory></pre>
-to config/RELEASE.
-<br>Also remove
-<pre>ld &lt; seq</pre>
-from the st.cmd files in the iocBoot subdirectories.</blockquote>
-
-<h3>
-iocCore changes</h3>
-
-<blockquote>iocCore has been renamed to iocCoreLibrary.o.
-<br>Change
-<pre>INSTALLS=iocCore</pre>
-to
-<pre>LIBOBJS += $(EPICS_BASE_BIN)/iocCoreLibrary.o</pre>
-in your application src/Makefile.Vx files .
-<br>Also remove
-<pre>ld &lt; iocCore</pre>
-from the st.cmd files in the iocBoot subdirectories.</blockquote>
-
-<h3>
-Library db changes</h3>
-
-<blockquote>The Db library name was changed to dbStaticHost for host builds
-and dbStaticIoc for ioc builds.
-<br>Change
-<pre>PROD_LIBS+=Db</pre>
-to
-<pre>PROD_LIBS+=dbStaticHost</pre>
-and
-<pre>Db_DIR=$(EPICS_BASE_LIB)</pre>
-to
-<pre>dbStaticHost_DIR=$(EPICS_BASE_LIB)</pre>
-in your application src/Makefile.Host files.</blockquote>
-
-<h3>
-VxWorks C++ munched libraries and object files</h3>
-
-<blockquote>Since R3.14 contains C++ code, the build rules were changed
-to create a corresponding munched file for every vx object file built.
-The objects files can be combined to form libraries but the munched files
-must be loaded into vxWorks. In all st.cmd files add the suffix "<tt>.munch</tt>"
-to the ld lines where object files were previously loaded. For example
-change
-<pre>ld &lt; exampleLib</pre>
-to
-<pre>ld &lt; exampleLibrary.munch</pre>
-</blockquote>
-
-<h3>
-recGbl calls</h3>
-
-<blockquote>You may need to add the line&nbsp; "<tt>#include "recGbl.h</tt>"
-to any source files that have recGbl* calls so that the file will compile
-without errors.</blockquote>
-
-<h3>
-Record support changes</h3>
-
-<blockquote>The steppermotor, scan, and pid records are no longer in base.
-If your application does not use these record types, comment out or remove
-references to them in base.dbd and baseLIBOBJS. If these record types are
-used by your application you must download and build the modules with R3.14
-base, add appropriate module definitions to your application's config/RELEASE
-fileand change the <tt>LIBOBJS</tt> definitions. For example
-<br>add
-<pre>PID=&lt;full path to modules directory>/pid</pre>
-to config/RELEASE.
-<br>Remove
-<pre>LIBOBJS += $(EPICS_BASE_BIN)/pidRecord.o</pre>
-from baseLIBOBJS,
-<br>and add
-<pre>LIBOBJS += $(PID_BIN)/pidRecord.o</pre>
-to your application src/Makefile.
-<p>You should consider changing any existing old steppermotor records to
-the new EPICS&nbsp; <a href="http://www.aps.anl.gov/upd/people/sluiter/epics/modules/mechanism/motor/index.html">motor
-record</a>&nbsp; module supported by Beamline Controls and Data Acquisition
-at APS.</blockquote>
-
-<h3>
-RecDynLink.o and devPtSoft changes</h3>
-
-<blockquote>recDynLink.o and devPtSoft.o are no longer in base. Remove
-references to them in base.dbd and baseLIBOBJS if they are not used in
-application.</blockquote>
-
-<h3>
-Hardware support changes</h3>
-
-<blockquote>All hardware support (dev, drv and dbd files) has been unbundled
-from base R3.14. This support includes the files <tt>symb, symb.dbd, drvHp1404a.o,
-drvEpvxiMsg.o, and drvEpvxi.o</tt>.&nbsp; If they are not used in your
-application, comment out references to these files in base.dbd and baseLIBOBJS.
-<p>Hardware support files now exist as separate modules available for download
-from the <a href="http://www.aps.anl.gov/epics/">EPICS www home page at
-ANL</a>. You must now download all the hardware support modules needed
-for your application, build the modules with R3.14 base,&nbsp; add the
-appropriate module full path definitions to your application config/RELEASE
-file, and change <tt>LIBOBJS</tt> location definition <tt>$(EPICS_BASE_BIN)</tt>
-to the module definition bin directory in your application src directory
-files.
-<p>For example, remove
-<pre>LIBOBJS+=$(EPICS_BASE_BIN)/symb</pre>
-from baseLIBOBJS and add
-<pre>LIBOBJS+=$(SYMB_BIN)/symb</pre>
-to your application src/Makefile,
-<br>and add the line
-<pre>SYMB=&lt;full path definition for the built module SYMB></pre>
-into your application config/RELEASE file .
-<p>After a gnumake in the symb module followed by a gnumake in the application
-config directory, the definitions <tt>SYMB_BIN</tt> and <tt>SYMB_LIB</tt>
-will be created,&nbsp; the directory $(SYMB)/include will be added to the
-include directories on the compiler command lines&nbsp; (in the <tt>INSTALL_INCLUDES</tt>
-definition)&nbsp; and the directory $(SYMB)/dbd will be added to the dbd
-search directories on the dbExpand command lines (in the <tt>INSTALL_DBDFLAGS</tt>
-definition).</blockquote>
-
-<h3>
-dbLoadtemplate tool changes</h3>
-
-<blockquote>The host tool dbLoadTemplate has been replaced by a new extension,
-msi. dbLoadTemplate is still supported on iocs. Build the msi extension
-with base R3.14 and change the following definitions in your application
-files.
-<p>In config/RULES.Db replace the line
-<pre>DBLOADTEMPLATE=$(EPICS_BASE_HOST_BIN)/dbLoadTemplate$(EXE)</pre>
-with
-<pre>MSI = $(firstword $(wildcard $(EPICS_EXTENSIONS_HOST_BIN)/msi$(HOSTEXE) \
-&nbsp;&nbsp; (EPICS_EXTENSIONS)/bin/$(HOST_OS_CLASS)/msi$(HOSTEXE)) msi$(HOSTEXE))</pre>
-and change line:
-<pre>@$(DBLOADTEMPLATE) $&lt; > $@</pre>
-to
-<pre>@$(MSI) $&lt; > $@</pre>
-Also, if dbLoadTemplate was used by your application,&nbsp; add the definition
-<blockquote>
-<pre>EPICS_EXTENSIONS=&lt;full path name to epics extensions directory></pre>
-</blockquote>
-to your application config/RELEASE file.</blockquote>
-depends changes
-<p>&nbsp;&nbsp;&nbsp;&nbsp; Remove any SRCS.c and SRCS.cc definitions in
-your application src/Makefile..*files. The depends rule no longer uses
-these definitions.
-</body>
-</html>

READMEbuildingR3.13ExtensionsWithR3.14.html

@@ -1,132 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="Author" content="jba">
-   <meta name="GENERATOR" content="Mozilla/4.76 [en] (X11; U; SunOS 5.8 sun4u) [Netscape]">
-</head>
-<body>
-
-<center>
-<h2>
-Building EPICS R3.13 extensions with R3.14 base</h2></center>
-
-<p><br>EPICS R3.13 extensions have both a Makefile and a Makefile.Host
-in the build directories and the EPICS R3.13 extension tree has an extensions/config
-directory.
-<h3>
-Preliminary steps for all extensions</h3>
-
-<blockquote>
-<li>
-Download the latest version (10/25/00) of the extensions/config files,
-extensionsConfig.tar.gz,&nbsp; from the APS EPICS www page.</li>
-
-<li>
-Make certain that you have set the HOST_ARCH environment variable.</li>
-
-<li>
-Set EPICS_BASE in extensions/config/RELEASE to the full path location of
-a built R3.14 base.</li>
-
-<li>
-BASE_3_14 is now defined in the base/config/CONFIG_BASE_VERSION.&nbsp;
-The commented BASE_3_14 definition can be removed from extensions/config/RELEASE.</li>
-</blockquote>
-
-<h3>
-Building downloaded APS distribution extensions with base R3.14</h3>
-
-<blockquote>
-<li>
-Download the latest version (10/25/00) of extensions distributed from the
-APS EPICS www page. The latest versions of the extensions should build
-with both R3.13 and R3.14. Note that the order of building extensions is
-important, i.e. some extensions depend on other extensions being built
-first. The extensions/config/CONFIG_EXTENSIONS file contains notes on extension
-dependancies and contains a definition of DIRS (used by extensions/src/Makefile)
-with the proper order for building the APS distributed extensions.</li>
-
-<li>
-Executing gnumake at the root level of the extensions tree or in the src
-directory should build the APS extensions in the proper order.</li>
-</blockquote>
-
-<h3>
-Building your extensions with base R3.14</h3>
-
-<blockquote>
-<li>
-<b>Library Db renamed</b></li>
-
-<br>Library Db has been renamed to dbStaticHost in EPICS base R3.14. In
-some extensions lib Db is not used and Db can be removed from the USR_LIBS
-(or PROD_LIBS) line. If the library is needed ( you get unresolved items
-after removing Db), the following lines should be added to Makefile.Host.
-<blockquote><tt>ifdef BASE_3_14</tt>
-<br><tt>USR_LIBS += dbStaticHost</tt>
-<br><tt>dbStaticHost_DIR = $(EPICS_BASE_LIB)</tt>
-<br><tt>else</tt>
-<br><tt>USR_LIBS += Db</tt>
-<br><tt>Db_DIR = $(EPICS_BASE_LIB)</tt>
-<br><tt>endif</tt></blockquote>
-
-<li>
-<b>Target architecture specifications changed</b></li>
-
-<br>Since target architecture specifications have been changed (solaris
-to solaris-sparc, win32 to win32-x86, ...) Makefile.Host references to
-and tests on T_A have to be changed.&nbsp; In most cases T_A can be replaced
-by OS_CLASS.&nbsp; Since HOST_ARCH will eventually be phased out, it would
-be a good idea to change any Makefile.Host references to HOST_ARCH to OS_CLASS
-if possible.
-<br>For example change
-<blockquote><tt>ifeq ($(T_A),solaris)</tt>
-<br><tt>RPCFLAGS = -K -1</tt>
-<br><tt>endif</tt></blockquote>
-to
-<blockquote><tt>ifeq ($(OS_CLASS),solaris)</tt>
-<br><tt>RPCFLAGS = -K -1</tt>
-<br><tt>endif</tt></blockquote>
-
-<li>
-<b>New ca_set_puser</b></li>
-
-<br>Statements of the form: <tt>ca_puser(chid) = xyz</tt>; should to be
-changed to:&nbsp; <tt>ca_set_puser(chid,xyz)</tt>;
-<br>&nbsp;
-<li>
-<b>Extern C around includes</b></li>
-
-<br>Remove any extern "C" braces around #includes of EPICS base header
-files.
-<br>For example change
-<blockquote><tt>extern "C" {</tt>
-<br><tt>#include "cadefs.h"</tt>
-<br><tt>} /* end extern C */</tt></blockquote>
-to
-<blockquote><tt>#include "cadefs.h"</tt></blockquote>
-
-<li>
-<b>Infrequently used R3.13 timestamp functions unbundled from base</b></li>
-
-<br>Some infrequently used R3.13 timestamp functions and macro definitions
-have been removed from EPICS base and now exist in a library, ts, created
-and installed in the ar extension.&nbsp; The only ANL distributed extension
-that uses these unbundled functions and macros&nbsp; is cau. The two R3.13
-functions tsStampToText and tsLocalTime along with the definitions TS_TEXT_MONDDYYYY
-and TS_TEXT_MMDDYY have been retained in R3.14 for extension compatibility
-purposes.
-<br>If your extension gets undefines for TS_* usage and ts* function calls
-when built with R3.14, you must obtain and build the ar extension. Add
-an #include for tsSubr.h to your extension source code and add library
-ts to PROD_LIBS or USR_LIBS in your Makefile.Host as follows:
-<blockquote><tt>#include "tsSubr.h"</tt>
-<p><tt>ifdef BASE_3_14</tt>
-<br><tt>PROD_LIBS += ts</tt>
-<br><tt>ts_DIR = $(EPICS_EXTENSIONS_LIB)</tt>
-<br><tt>endif</tt></blockquote>
-</blockquote>
-
-</body>
-</html>

READMEconvertingR3.13AppsToR3.14.html

@@ -1,302 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="Author" content="jba">
-   <meta name="GENERATOR" content="Mozilla/4.76 [en] (X11; U; SunOS 5.8 sun4u) [Netscape]">
-</head>
-<body>
-
-<center>
-<h2>
-Converting an EPICS R3.13 application to R3.14.0alpha3</h2></center>
-
-<p><br>This document describes how to convert a R3.13 vxWorks application
-so that it builds with release R3.14.0alpha3.&nbsp; It describes procedures
-such that:
-<ul>
-<li>
-The application uses the configure rules which are new to R3.14.</li>
-</ul>
-
-<ul>
-<li>
-The OSI (Operating System Independent) features of R3.14 are available,
-i.e. iocCore products can be build for vxWorks as well as other platforms,
-e.g. solaris and linux.</li>
-</ul>
-
-<h3>
-Gnumake clean uninstall</h3>
-
-<blockquote>First do a gnumake clean uninstall in the application's root
-directory to remove all files created by earlier builds.</blockquote>
-
-<h3>
-Create a new R3.14 application</h3>
-
-<blockquote><tt>mkdir &lt;top></tt>
-<br><tt>cd &lt;top></tt>
-<br><tt>&lt;full path to R3.14.0alpha3 base>/bin/&lt;host_arch>/makeBaseApp.pl
--t example example</tt></blockquote>
-
-<h3>
-Copy all *App and iocBoot directories and files to the new &lt;top> directory</h3>
-
-<blockquote><tt>cd &lt;oldtop></tt>
-<br><tt>find *App iocBoot -print | cpio -pvmd &lt;fullpath name to new
-top></tt></blockquote>
-
-<h3>
-Modify &lt;top>/configure/RELEASE</h3>
-
-<blockquote>Copy definitions of external modules excluding EPICS_BASE and
-TEMPLATES_TOP from old application RELEASE file.
-<br>If sequence programs (*.st or *.stt files) exist in your application,
-add the SNCSEQ location definition for the R3.14 seq external module
-<blockquote><tt>SNCSEQ =&lt;full path to seq module top></tt></blockquote>
-The R3.14 seq module must exist and be built with EPICS base R3.14.0alpha3.</blockquote>
-
-<h3>
-Modify the Makefiles in &lt;top>/*App directories.</h3>
-
-<blockquote>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/config/CONFIG_APP</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/CONFIG</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; i<tt>nclude $(TOP)/config/RULES_DIRS</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/RULES_DIRS</tt></blockquote>
-
-<h3>
-Modify the Makefiles in &lt;top>/*App/*Db directories.</h3>
-
-<blockquote>Remove existing Makefile
-<br>Rename Makefile.Host to Makefile
-<br>Modify Makefile as follows:
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>TOP=../../..</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>TOP=../..</tt>
-<p>Change&nbsp;&nbsp;&nbsp; i<tt>nclude $(TOP)/config/CONFIG_APP</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/CONFIG</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/config/RULES.Db</tt>
-<br>to <tt>include $(TOP)/configure/RULES</tt>
-<p>Place all definitions between the include lines.
-<p>Place any rules after the last include line.</blockquote>
-
-<h3>
-Modify the Makefiles in &lt;top>/*App/src directories.</h3>
-
-<blockquote>Remove existing Makefile
-<br>Rename Makefile.Host to Makefile
-<br>Modify Makefile as follows:
-<p>Change <tt>TOP=../../..</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>TOP=../..</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/config/CONFIG_APP</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/CONFIG</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; i<tt>nclude $(TOP)/config/RULES.Host</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/RULES</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>PROD_LIBS = &lt;name></tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp;<tt> &lt;prod name>_LIBS = dbStaticHost</tt>
-<br>where&nbsp; <tt>&lt;prod name></tt> is a specifified product to be
-built.
-<p>Change&nbsp; library name <tt>Db</tt> to <tt>dbStaticHost.</tt>
-<br>Change<tt> PROD_LIBS = Db</tt>
-<br>to&nbsp;<tt> &lt;prodname>_LIBS += dbStaticHost</tt>
-<br>and <tt>Db_DIR = $(EPICS_BASE_LIB)</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>dbStaticHost_DIR = $(EPICS_BASE_LIB)</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>USER_DBDFLAGS</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>USR_DBDFLAGS</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>RECTYPES +=&nbsp; xxxRecord.h</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>DBDINC += xxxRecord</tt>
-<p>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>DBDNAME = &lt;name>App.dbd</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>DBD += &lt;name>.dbd</tt>
-<p>Remove all <tt>DBDEXPAND</tt>&nbsp; lines.
-<p>Change&nbsp; <tt>PROD = &lt;prodname></tt>
-<br>to <tt>PROD_HOST = &lt;prodname></tt>
-<p>Change&nbsp; <tt>SRCS.c += &lt;name></tt>
-<br>to <tt>&lt;prodname>_SRCS += &lt;name></tt>
-<br>or<tt> &lt;libname>_SRCS += &lt;name></tt>
-<p>Add the contents of Makefile.Vx to Makefile removing the include lines
-and the TOP definition.</blockquote>
-
-<blockquote>Change&nbsp;&nbsp;&nbsp;&nbsp; <tt>LIBNAME = &lt;libname>Lib</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>PROD_vxWorks = &lt;libname></tt><tt></tt>
-<p>Remove line&nbsp;<tt> -include ../baseLIBOBJS</tt>
-<p>Remove&nbsp; line&nbsp;&nbsp;&nbsp; <tt>INSTALLS = iocCore seq</tt><tt></tt>
-<p>Change all <tt>SRCS.c += ../&lt;name>.c </tt>lines
-<br>to&nbsp;&nbsp; <font face="Arial,Helvetica">&lt;prodname>_SRCS += &lt;name>.c</font>
-<br>if the source files exist in the current directory.<tt></tt>
-<p>Change all <tt>*OBJS += &lt;name>.o</tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-lines
-<br>to&nbsp;&nbsp; <font face="Arial,Helvetica">&lt;prodname>_SRCS += &lt;name>.c</font>
-<br>or&nbsp;<font face="Arial,Helvetica"> &lt;prodname>_SRCS += &lt;name>.cc</font>
-<br>if the c/c++ source files exist in the current directory.
-<p>Change&nbsp;&nbsp;&nbsp; <tt>LIBOBJS += &lt;seq_program_name>.o</tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-lines
-<br>to&nbsp;&nbsp; <tt>&lt;prodname>_SRCS += &lt;seq_program_name>.stt</tt>
-<br>or&nbsp; <tt>&lt;prodname>_SRCS += &lt;seq_program_name>.st</tt><tt></tt>
-<p>Add the lines
-<blockquote><tt>#&lt;name>_LIBS += seq</tt>
-<br><tt>#&lt;name>_LIBS += pv</tt>
-<br><tt>#seq_DIR&nbsp;&nbsp;&nbsp; = $(SNCSEQ_LIB)</tt>
-<br><tt>#pv_DIR&nbsp;&nbsp;&nbsp;&nbsp; = $(SNCSEQ_LIB)</tt><tt></tt>
-<p><tt>&lt;name>_LIBS += recIoc</tt>
-<br><tt>&lt;name>_LIBS += softDevIoc</tt>
-<br><tt>&lt;name>_LIBS += testDevIoc</tt>
-<br><tt>&lt;name>_LIBS += iocsh</tt>
-<br><tt>&lt;name>_LIBS += miscIoc</tt>
-<br><tt>&lt;name>_LIBS += rsrvIoc</tt>
-<br><tt>&lt;name>_LIBS += dbtoolsIoc</tt>
-<br><tt>&lt;name>_LIBS += asIoc</tt>
-<br><tt>&lt;name>_LIBS += dbIoc</tt>
-<br><tt>&lt;name>_LIBS += registryIoc</tt>
-<br><tt>&lt;name>_LIBS += dbStaticIoc</tt>
-<br><tt>&lt;name>_LIBS += ca</tt>
-<br><tt>&lt;name>_LIBS += Com</tt></blockquote>
-where <tt>&lt;name></tt> is the&nbsp; name in the <tt>PROD_vxWorks</tt>
-definition, and uncomment the first four lines if you have sequence programs
-(.st or .stt files) in the current directory.
-<p>Place all macro definitions between the include lines.
-<p>Place any rules after the last include line.</blockquote>
-
-<h3>
-Modify the Makefiles in &lt;top>/iocBoot directory.</h3>
-
-<blockquote>Change i<tt>nclude $(TOP)/config/CONFIG_APP</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/CONFIG</tt>
-<p>Remove the line <tt>DIRS += $(wildcard *ioc*)</tt>
-<p>Change <tt>include $(TOP)/config/RULES.iocBoot</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; i<tt>nclude $(TOP)/configure/RULES.iocBoot</tt></blockquote>
-
-<h3>
-Modify the Makefiles in &lt;top>/iocBoot/ioc* directories.</h3>
-
-<blockquote>Change <tt>include $(TOP)/config/CONFIG_APP</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/CONFIG</tt>
-<p>Change <tt>include ARCH = &lt;old arch specification e.g. mv167></tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include ARCH = &lt;new arch specificatio
-e.g. vxWorks-68040></tt><tt></tt>
-<p>Change <tt>include $(TOP)/config/RULES.ioc</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp; <tt>include $(TOP)/configure/RULES.ioc</tt>
-<p>Add the following rule at the end of the Makefile.
-<blockquote><tt>buildInstall: cdCommands</tt></blockquote>
-</blockquote>
-
-<h3>
-Modify st.cmd in &lt;top>/iocBoot/ioc* directories.</h3>
-
-<blockquote>Remove the lines</blockquote>
-
-<blockquote>
-<blockquote>
-<pre>ld &lt; seq</pre>
-
-<pre>ld &lt; iocCore</pre>
-</blockquote>
-Change&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>ld &lt; &lt;libname>Lib</tt>
-<br>to&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>ld &lt; &lt;libname>.munch</tt>
-<p>Change&nbsp; load statements&nbsp; for db and dbd files from
-<blockquote><tt>cd startup</tt>
-<br><tt>dbLoadDatabase("../../dbd/exampleApp.dbd")</tt>
-<br><tt>dbLoadRecords("../../db/dbExample1.db","user=jba")</tt>
-<br><tt>dbLoadRecords("../../db/dbExample2.db")</tt></blockquote>
-to
-<blockquote><tt>cd top</tt>
-<br><tt>dbLoadDatabase("dbd/example.dbd")</tt>
-<br><tt>registerRecordDeviceDriver(pdbbase)</tt>
-<br><tt>dbLoadRecords("db/dbExample1.db","user=jba")</tt>
-<br><tt>dbLoadRecords("db/dbExample2.db")</tt></blockquote>
-</blockquote>
-
-<h3>
-Record support changes</h3>
-
-<blockquote>The steppermotor, scan, and pid records are no longer in base.&nbsp;
-If these records are not used in your application, comment out references
-to them in base.dbd. If these record types are used at your site, they&nbsp;
-should be downloaded and built with base R3.14 by your EPICS administrator.
-To update the R3.14 location of these record types in your application
-you must&nbsp; add appropriate module definitions to your application's
-config/RELEASE file and change the <tt>LIBOBJS</tt> definitions.
-<p>For example add</blockquote>
-
-<blockquote>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>PID=&lt;full
-path to modules directory>/pid</tt>
-<p>to config/RELEASE.
-<br>Remove</blockquote>
-
-<blockquote>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>LIBOBJS
-+= $(EPICS_BASE_BIN)/pidRecord.o</tt>
-<p>from baseLIBOBJS, and add</blockquote>
-
-<blockquote>
-<blockquote><tt>LIBOBJS += $(PID_BIN)/pidRecord.o</tt></blockquote>
-to your application src/Makefile.</blockquote>
-
-<blockquote>You should consider changing any existing old steppermotor
-records to the new EPICS&nbsp; motor record&nbsp; module supported by Beamline
-Controls and Data Acquisition at APS.</blockquote>
-
-<h3>
-RecDynLink.o and devPtSoft changes</h3>
-
-<blockquote>recDynLink.o and devPtSoft.o are no longer in EPICS base and
-now exist as separate EPICS modules.You must now add the appropriate module
-full path definitions to your application config/RELEASE file, and change
-<tt>LIBOBJS</tt>
-location definition <tt>$(EPICS_BASE_BIN)</tt> to the module definition
-bin directory in your application src directory files.&nbsp; See "Hardware
-support changes" below for instructions.</blockquote>
-
-<h3>
-Hardware support changes</h3>
-
-<blockquote>All hardware support (dev, drv and dbd files) except soft support
-has been unbundled from base R3.14. This support includes the files symb.dbd,
-drvHp1404a.o, drvEpvxiMsg.o, and drvEpvxi.o. If these are not used by your
-application, comment out references to them in base.dbd.</blockquote>
-
-<blockquote>Hardware support now exists as separate EPICS modules. The
-hardware support for your site should be downloaded and built with base
-R3.14 by your EPICS administrator. You must now add the appropriate module
-full path definitions to your application config/RELEASE file, and change
-<tt>LIBOBJS</tt>
-location from <tt>$(EPICS_BASE_BIN) </tt>to the module&nbsp; bin directory
-in your application src directory files.
-<p>For example, remove</blockquote>
-
-<blockquote>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>LIBOBJS+=$(EPICS_BASE_BIN)/symb</tt></blockquote>
-
-<blockquote>from baseLIBOBJS and add</blockquote>
-
-<blockquote>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>LIBOBJS+=$(SYMB_BIN)/symb</tt></blockquote>
-
-<blockquote>to your application src/Makefile,
-<br>and add the line</blockquote>
-
-<blockquote>
-<blockquote><tt>SYMB=&lt;full path definition for the built module SYMB></tt></blockquote>
-</blockquote>
-
-<blockquote>into your application config/RELEASE file .</blockquote>
-
-<h3>
-dbLoadtemplate tool changes</h3>
-
-<blockquote>The host tool dbLoadTemplate has been replace by a new EPICS
-extension, msi, which should be downloaded and built with base R3.14 by
-your EPICS administrator. dbLoadTemplate is still supported on iocs.&nbsp;
-If, in your application, db files are created from template and substitution
-files you should&nbsp; add the definition
-<p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <tt>EPICS_EXTENSIONS=&lt;full
-path name to epics extensions directory></tt>
-<p>to your application config/RELEASE file.</blockquote>
-
-<blockquote>
-<blockquote>&nbsp;</blockquote>
-
-<blockquote>
-<pre></pre>
-</blockquote>
-</blockquote>
-
-<br>&nbsp;
-</body>
-</html>

RELEASE_NOTES.html

@@ -1,266 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="GENERATOR" content="Mozilla/4.76 [en] (X11; U; SunOS 5.8 sun4u) [Netscape]">
-   <title>EPICS Release baseR3.14
-</title>
-</head>
-<body>
-<center>
-<h1>
-EPICS Release base 3.14.0beta1</h1></center>
-<h2>Changes since alpha2</h2>
-All changes for release 3.13.5 that also apply to 3.14 have been made.
-<p>
-<b>devAiSoftRaw and devAoSoftRaw</b>
-</p>
-<p>
-A new state is defined for the LINR field. The name is "SLOPE",
-which allows any device type to be used with manual settings of
-the EOFF and ESLO fields.  With this setting, the device support's
-special_linconv() routine is only called when LINR=LINEAR.
-</p>
-<p>
-The RTEMS TFTP remote filesystem driver now supports a limited form of
-the chdir() system call.  One restriction is that all pathnames passed
-to chdir() must end in a / character, so IOC shell commands to change
-directories must be given as
-</p>
-<p>
-cd ../db
-</p>
-<center>
-<h1>
-EPICS Release base 3.14.0alpha2</h1></center>
-Since the alpha1 release some major changes were made to the build system,
-to some of the libCom facilities, and to the iocsh facilities.
-<p>The unbundled version of the sequencer has been build and tested with
-this release. You must obtain a version of the sequencer that has been
-built against alpha2.
-<p>A verion of the HPlanGpib support has been built and tested with this
-release. Again you must obtain a version that builds with alpha2.
-<p>A new update to the Application Developer's Guide is available for this
-release.
-<h3>
-Build changes</h3>
-
-<ul>
-<li>
-Operating system independant builds are now done in an O.Common subdirectory
-and then installed instead of being performed directly in an install directory.</li>
-
-<li>
-Build definition names (e.g. RECTYPES, MENUS, DBDNAME, and BPTS) have been
-changed to specify the name of the file to be created and installed instead
-of the source file name.</li>
-
-<li>
-All db and dbd related definitions and rules have been moved into base/configure/RULES.Db
-file. The rules now allow multiple dbd files and registerRecordDeviceDriver
-files to be created in a single Makefile.</li>
-
-<li>
-"gnumake depends" no longer depends on a complete buildInstall.</li>
-</ul>
-
-<h3>
-Converting alpha1 applications to alpha2</h3>
-Build modifications in alpha2 require the following changes to existing
-R3.14 applications.
-<ul>
-<li>
-&nbsp;Remove the now unused RULES files</li>
-
-<li>
-</li>
-
-<ul>./configure/RULES.Db
-<br>./configure/RULES.registerRecordDeviceDriver
-<br>&nbsp;</ul>
-
-<li>
-Delete the following line in ./configure/RULES</li>
-
-<ul>&nbsp;
-<br>include $(TOP)/configure/RULES.registerRecordDeviceDriver</ul>
-</ul>
-
-<ul>
-<li>
-&nbsp; In &lt;top>/configure/Makefile change</li>
-
-<ul>&nbsp;
-<br>@$(PERL) $(TOOLS)/makeConfigAppInclude.pl $(T_A) $@ $(TOP)</ul>
-to
-<ul>@$(PERL) $(TOOLS)/makeConfigAppInclude.pl $(EPICS_HOST_ARCH) $(T_A)
-$@ $(TOP)
-<br>&nbsp;</ul>
-and add the line
-<ul>&nbsp;
-<br>depends: install
-<br>&nbsp;</ul>
-to the bottom of the Makefile.
-<ul>&nbsp;</ul>
-</ul>
-
-<ul>
-<li>
-In all *App/*Db/Makefileschange</li>
-
-<ul>&nbsp;
-<br>include $(TOP)/configure/RULES.Db</ul>
-to
-<ul>include $(TOP)/configure/RULES</ul>
-
-<li>
-In all *App/src/Makefile files</li>
-
-<ul>&nbsp;</ul>
-change&nbsp;&nbsp;&nbsp; DBDNAME = &lt;name>App&nbsp;&nbsp;&nbsp; to&nbsp;&nbsp;&nbsp;
-DBD += &lt;name>
-<ul>&nbsp;</ul>
-and remove the line
-<br>&nbsp;
-<ul>DBDEXPAND = &lt;name>Include.dbd
-<br>&nbsp;</ul>
-NOTE: If any of your *App/*Db/Makefiles contain "DBDNAME =" lines you should
-make these same changes in that *Db dirctory.
-<br>&nbsp;
-<li>
-In all *App/src/Makefile Makefiles</li>
-
-<ul>&nbsp;</ul>
-change&nbsp;&nbsp;&nbsp; RECTYPES=&lt;name>.h&nbsp;&nbsp;&nbsp; to&nbsp;&nbsp;&nbsp;
-DBDINC+=&lt;name>
-<ul>&nbsp;</ul>
-change&nbsp;&nbsp;&nbsp; MENUS=&lt;name>.h&nbsp;&nbsp;&nbsp; to&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
-DBDINC+=&lt;name></ul>
-
-<ul>change&nbsp;&nbsp;&nbsp; BPTS&nbsp;&nbsp;&nbsp;&nbsp; to&nbsp;&nbsp;&nbsp;&nbsp;
-DBD
-<p>change&nbsp;&nbsp;&nbsp;&nbsp; INSTALLDB&nbsp;&nbsp;&nbsp;&nbsp; to&nbsp;&nbsp;&nbsp;
-DB
-<p>change&nbsp;&nbsp;&nbsp; DBDINSTALL&nbsp;&nbsp;&nbsp; to&nbsp;&nbsp;&nbsp;&nbsp;
-DBD
-<br>&nbsp;
-<li>
-In all example *App/src/Makefile files change</li>
-
-<ul>&nbsp;
-<br>example_SRCS_DEFAULT += registerRecordDeviceDriver.c</ul>
-to
-<ul>example_SRCS_DEFAULT += &lt;name>_registerRecordDeviceDriver.cpp
-<br>&nbsp;</ul>
-where &lt;name> is the base name of a &lt;name>.dbd file which was created
-from a &lt;name>Include.dbd file and which will be loaded in a st.cmd or
-stcmd.host script (e.g. example).
-<br>&nbsp;
-<li>
-In ./iocBoot/ioc&lt;name>/st.cmd files change</li>
-
-<br>&nbsp;
-<ul>dbLoadDatabase("dbd/exampleApp.dbd")</ul>
-to
-<ul>dbLoadDatabase("dbd/example.dbd")
-<br>&nbsp;</ul>
-
-<li>
-In &lt;top>/iocBoot/ioc&lt;name>/stcmd.host files change</li>
-
-<ul>&nbsp;
-<br>dbLoadDatabase("../../dbd/exampleApp.dbd",0,0)</ul>
-to
-<ul>dbLoadDatabase("../../dbd/example.dbd",0,0)</ul>
-</ul>
-
-<h3>
-EPICS_HOST_ARCH changes</h3>
-GNU compiler builds are now determined by the value of EPICS_HOST_ARCH
-and are no longer specified in CONFIG_SITE.&nbsp; All references to the
-ANSI (ACC/GCC) and CPLUSPLUS (CCC/G++) macros have been removed.
-<br>&nbsp;
-<h3>
-libCom</h3>
-Most of the library routines and files starting with the prefix osi have
-been changed to start with epics. Several also had major changes to their
-user interface. See the latest version of the Application Developer's Guide
-for details.
-<br>&nbsp;
-<center>
-<h2>
-EPICS Release base 3.14.0alpha1 Notes</h2></center>
-
-<p><br>
-<p>This is the first release of 3.14. This is the first release that supports
-iocCore on platforms besides vxWorks.
-<p>iocCore is now supported on the following platforms:
-<ul>
-<li>
-vxWorks</li>
-
-<br>Tornado II is required.
-<li>
-RTEMS</li>
-
-<br>An open source real time operating system. It has been tested on MVME167
-and MC68360 processors. RTEMS also supports powerPC.
-<li>
-solaris</li>
-
-<br>Has been tested on solaris 2.6 and solaris 8 with Sun workshop 6.0 (C++ 5.2). 
-Sun workshop 5.0 (C++ 5.0) will not compile this version of EPICS.
-<li>
-Linux</li>
-
-<br>Has been tested on Redhat x86 platforms.
-<li>
-winNT</li>
-
-<br>Testing has been done with visual C++ 6.0.</ul>
-A new version of the Application Developers Guide is available. The following
-gives links to the new Application Developer's Guide and to RTEMS information.
-<p>http://www.aps.anl.gov/epics/modules/base/R3-14.php
-<p>Most of the Application Developer's Guide has only minor changes. The
-following are new.
-<ul>
-<li>
-Chapter 2 describes the new features for 3.14.</li>
-
-<li>
-Chapter 4 describes the build facility for 3.14</li>
-
-<li>
-Chapters 19 and 20 describe libCom, which was not previously documented.</li>
-</ul>
-
-<p><br>It must be emphasized that this is an alpha release.
-<ul>
-<li>
-Please don't use it for existing operational systems</li>
-
-<li>
-Don't build your operational CA clients with it.</li>
-
-<li>
-The APIs for new components in libCom are still evolving so if you use
-them be prepared for changes.</li>
-
-<li>
-HPUX - No support currently because we could not find good support for
-multithreading.</li>
-</ul>
-Building Applications
-<ul>
-<li>
-For new applications see Chapters 2 (New Features) and Chapter 4 (Build
-Facility) of the Application Developer's Guide.</li>
-
-<li>
-For existing applications the old config rules are still supported. Some
-changes, however, are needed. Documentation is being prepared and will
-appear in these release notes sooon.</li>
-</ul>
-
-</body>
-</html>

config.hkv2f.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.mk

@@ -1 +0,0 @@
-BUILD_ARCHS=sun4 mv167 mv147

config.mv147.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.mv167.mk

@@ -1,5 +0,0 @@
-BUILD_TYPE = Vx
-
-DIRS =	src/as src/ca src/db src/dev src/devOpt src/drv \
-	src/libCom src/libvxWorks src/rec src/rsrv \
-	src/sequencer src/util src/dbtools src/misc .

config.sun4.mk

@@ -1,13 +0,0 @@
-BUILD_TYPE = Unix
-DIRS =	src/libCom \
-	src/db \
-	src/ca \
-	src/toolsComm/antelope \
-	src/toolsComm/flex \
-	src/as \
-	src/bld \
-	src/dct \
-	src/util \
-	src/sequencer \
-	src/dbtools \
-	rec

config/CONFIG

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #

config/CONFIG.Host.Borland

@@ -1,10 +1,16 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.Borland
 #  This file is maintained by the EPICS community.
 #  Sites may override these definitions in CONFIG_SITE.Borland
  
-# 	Use std path variables from ms
-HOME = $(HOMEDRIVE)$(HOMEPATH)
-
 BORLAND_LIB = $(BORLAND)\\lib
 BORLAND_INC = $(BORLAND)\\include
 BORLAND_BIN = $(BORLAND)\\bin
@@ -236,7 +242,7 @@ USR_DEPLIBS = $(foreach lib,$(USR_LIBS),$(firstword $(wildcard $($(lib)_DIR)/$(l
 
 # by default the libraries used when linking the DLL are just
 # PROD_LIBS ans SYS_PROD_LIBS minus the DLL name
-DLL_LIBS = $(subst $(LIBRARY),, $(PROD_LIBS))
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS))
  
 #
 #	EPICS libs that we need to link the DLL with

config/CONFIG.Host.Darwin

@@ -0,0 +1,50 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# CONFIG.Host.Darwin
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.Darwin
+ 
+ARCH_CLASS = Darwin
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+
+#
+# The config files are a real mess.  The following set of definitions
+# seems to work for all the weird ways in which the extensions makefile
+# fragments use them.
+#
+ANSI = GCC
+CPLUSPLUS = c++
+CC = cc
+CXX= c++
+GCC = cc
+
+OP_SYS_CFLAGS += -no-cpp-precomp
+OP_SYS_INCLUDES = -I/sw/include -I/usr/X11R6/include
+OP_SYS_LDFLAGS += -L/sw/lib -L/usr/X11R6/lib
+
+#
+# Compiler/linker problems prevent the use of shared libraries at the moment
+#
+SHARED_LIBRARIES_Darwin = NO
+
+#
+# Something like this will be needed once shared libraries are built
+#
+SHRLIB_SUFFIX = .dylib$(SHARED_LIBRARIES)
+GCC_SHRLIB_LDFLAGS_YES += -dynamiclib -flat_namespace
+G++_SHRLIB_LDFLAGS_YES += -dynamiclib -flat_namespace
+
+#
+# Java
+#
+JAVA_DIR=/usr/

config/CONFIG.Host.Linux

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.Linux
 #
 #  This file is maintained by the EPICS community.
@@ -12,55 +21,19 @@ AR = ar -rc
 ARCMD = $(AR) $@
 RANLIB = ranlib -t
 
-#OP_SYS_FLAGS = -D_BSD_SOURCE -D_POSIX_SOURCE
+ANSI=GCC
+CPLUSPLUS=G++
 
-# Configure OS vendor C compiler
-ACC = gcc
-ACC_ANSI = $(ACC)
-#ACC_ANSI = $(ACC) -ansi -D_SVID_SOURCE
-#ACC_STRICT = $(ACC) -Xc
-ACC_STRICT = $(ACC) -pedantic
-#ACC_STRICT = $(ACC)  -ansi -pedantic -D_SVID_SOURCE
-ACC_TRAD = $(ACC)
-ACC_WARN_YES =  -Wall
-ACC_WARN_NO =  -w
-ACC_OPT_YES =  -O
-ACC_OPT_NO = -g
-ACC_SFLAGS_YES = -Bstatic
-ACC_SFLAGS_NO=
-ACC_SLIBS_YES =
-ACC_SLIBS_NO=
-ACC_SHRLIB_CFLAGS_YES =  -fPIC
-ACC_SHRLIB_LDFLAGS_YES =  -shared -Wl,-soname,$@ 
+GCC_SHRLIB_LDFLAGS_YES +=  -Wl,-soname,$@
+G++_SHRLIB_LDFLAGS_YES +=  -Wl,-soname,$@
 
+OP_SYS_CFLAGS += -D_BSD_SOURCE
 
-# Configure OS vendor C++ compiler
-CCC = g++
-CCC_NORMAL = $(CCC)
-CCC_STRICT = $(CCC)
-#CCC_TEMPL_INST_FLAG = -DEXPL_TEMPL
-CCC_WARN_YES =  -Wall
-CCC_WARN_NO =
-CCC_OPT_YES =  -O
-CCC_OPT_NO = -g
-CCC_SFLAGS_YES = -Bstatic
-CCC_SFLAGS_NO=
-CCC_SLIBS_YES =
-CCC_SLIBS_NO=
-CCC_DEPENDS_FLAG = -MM
-CCC_SHRLIB_CFLAGS_YES =  -fPIC
-CCC_SHRLIB_LDFLAGS_YES =  -shared -Wl,-soname,$@ 
+ARCH_DEP_CFLAGS = -D_X86_ -Dlinux -mcpu=pentium
+ARCH_DEP_LDLIBS += -lpthread -lreadline -lcurses -lrt
 
-# added smh 6/5/98 : when building fdmgr - seems to use this not ACC
-# in effect this overides orig def in CONFIG_COMMON :
-# which is GCC_STRICT = $(GCC) -ansi -pedantic
-GCC_STRICT = $(GCC) 
-G++_STRICT = $(G++)  -Wtraditional
-
-
-#ARCH_DEP_CFLAGS = -D_X86_ -Dlinux -D_USE_BSD
-ARCH_DEP_CFLAGS = -D_X86_ -Dlinux
-ARCH_DEP_LDFLAGS += -lpthread -lreadline -lcurses -lrt
+#Allows R3.13 built extensions to load R3.14 shared libs
+SYS_DLL_LIBS_Linux += pthread readline curses rt
 
 #glibc FAQ
 #	"_GNU_SOURCE:  glibc does not make the GNU extensions available 
@@ -75,4 +48,3 @@ ARCH_DEP_LDFLAGS += -lpthread -lreadline -lcurses -lrt
 #ARCH_DEP_CFLAGS += -D_GNU_SOURCE
 
 
-

config/CONFIG.Host.LynxOS

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.LynxOS
 #
 #  This file is maintained by the EPICS community.

config/CONFIG.Host.UnixCommon

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 #
 #  Contains definitions common to all Unix archs
@@ -20,12 +29,12 @@ SHRLIB_SUFFIX = .so
 
 SHRLIBNAME = lib$(LIBRARY)$(SHRLIB_SUFFIX)$(SHRLIB_VERSION:%=.%)
 
-DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS) $(USR_LIBS))
-DLL_LDLIBS = $(PRODNAME_LIBS:%=-l%) $(DLL_LIBS:%=-l%)
+SYS_DLL_LIBS += $(SYS_DLL_LIBS_$(OS_CLASS))
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS) $(USR_LIBS)) $(SYS_DLL_LIBS)
 
 INSTALL_SHRLIB = $(INSTALL_LIB)
 
-LINK.shrlib= $(SHRLIB_LINKER) -o $@ $(CFLAGS) $(CPPFLAGS) $(SHRLIB_LDFLAGS) $(LDFLAGS)
+LINK.shrlib= $(SHRLIB_LINKER) -o $@ $(CFLAGS) $(CPPFLAGS) $(SHRLIB_LDFLAGS) $(DLL_LDFLAGS) $(LDFLAGS)
 
 #-------------------------------------------------------
 # Unix command definitions
@@ -48,16 +57,19 @@ COND_PROD_DEPLIBS = $(foreach prod,$(PROD), $(foreach lib, $($(basename $(prod))
 PRODNAME_DEPLIBS = $(foreach lib,$(PRODNAME_LIBS),$(firstword $(wildcard $($(lib)_DIR)/lib$(lib).* $(EPICS_BASE_LIB)/lib$(lib).*)))
 PROD_DEPLIBS = $(foreach lib,$(PROD_LIBS),$(firstword $(wildcard $($(lib)_DIR)/lib$(lib).* $(EPICS_BASE_LIB)/lib$(lib).*)))
 USR_DEPLIBS = $(foreach lib,$(USR_LIBS),$(firstword $(wildcard $($(lib)_DIR)/lib$(lib).* $(EPICS_BASE_LIB)/lib$(lib).*)))
-
+DLL_DEPLIBS = $(foreach lib,$(DLL_LIBS),$(firstword $(wildcard $($(lib)_DIR)/lib$(lib).* $(EPICS_BASE_LIB)/lib$(lib).*)))
 #--------------------------------------------------
 # Determine ld flags
 USR_DIRS = $(dir $(PRODNAME_DEPLIBS)) $(dir $(PROD_DEPLIBS))\
  $(dir $(USR_DEPLIBS))
 USR_LDFLAGS += $(sort $(USR_DIRS:%=-L%))
+DLL_DIRS = $(dir $(DLL_DEPLIBS))
+DLL_LDFLAGS = $(sort $(DLL_DIRS:%=-L%))
 
 # Determine ld libs
 USR_LDLIBS = $(PRODNAME_LIBS:%=-l%) $(PROD_LIBS:%=-l%) $(USR_LIBS:%=-l%)\
  $(SYS_PROD_LIBS:%=-l%)
+DLL_LDLIBS = $(DLL_LIBS:%=-l%)
 
 #--------------------------------------------------
 # Operating system definitions

config/CONFIG.Host.WIN32

@@ -1,11 +1,17 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.WIN32
 #
 #  This file is maintained by the EPICS community.
 #  Sites may override these definitions in CONFIG_SITE.WIN32
  
-# 	Use std path variables from ms
-HOME = $(HOMEDRIVE)$(HOMEPATH)
-
 #
 # You currently get Visual C++ even if you ask for GNU.
 #
@@ -127,9 +133,9 @@ CCC_SFLAGS_NO= /MD$(VISC_SFLAGS_DEBUG) $(VISC_EPICS_DLL)
 CCC_SLIBS_YES=
 CCC_SLIBS_NO=
 
-LINK_OPT_FLAGS_YES = /WARN:3 /incremental:no /opt:ref\
+LINK_OPT_FLAGS_YES = /warn:3 /incremental:no /opt:ref\
 /release $(PROD_VERSION:%=/version:%)
-LINK_OPT_FLAGS_NO = /WARN:3 /debug 
+LINK_OPT_FLAGS_NO = /warn:3 /debug 
 OPT_LDFLAGS = $(LINK_OPT_FLAGS_$(HOST_OPT))
 
 ARCH_DEP_CFLAGS=
@@ -236,7 +242,7 @@ USR_DEPLIBS = $(foreach lib,$(USR_LIBS),$(firstword $($(lib)_DIR) $(EPICS_BASE_L
 
 # by default the libraries used when linking the DLL are just
 # PROD_LIBS ans SYS_PROD_LIBS minus the DLL name
-DLL_LIBS = $(subst $(LIBRARY),, $(PROD_LIBS))
+DLL_LIBS = $(patsubst $(LIBRARY),, $(PROD_LIBS))
  
 #
 #	EPICS libs that we need to link the DLL with
@@ -256,3 +262,6 @@ LINK.cc = $(WINLINK) -nologo $(LDFLAGS) -out:$@
 # $(dir $(USR_DEPLIBS))
 #USR_LDFLAGS += $(sort $(USR_DIRS:%=-L%))
 
+# Overrides for CONFIG_COMMON default
+POSIX_CPPFLAGS_YES = 
+

config/CONFIG.Host.alpha

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.alpha
 #
 #  This file is maintained by the EPICS community.

config/CONFIG.Host.cygwin32

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.cygwin32
 #
 #  This file is maintained by the EPICS community.
@@ -32,3 +41,4 @@ OP_SYS_LDLIBS =
 GCC_DEP_CFLAGS = -D_REENTRANT
 G++_DEP_CFLAGS = -D_REENTRANT
 
+POSIX_CPPFLAGS_YES = -D_POSIX_SOURCE

config/CONFIG.Host.darwin-ppc

@@ -0,0 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+-include $(EPICS_BASE)/config/CONFIG.Host.Darwin

config/CONFIG.Host.hp700

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.hp700
 #
 #  This file is maintained by the EPICS community.

config/CONFIG.Host.hpux-m68k

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# hpux-m68k is the new name for hp700
+-include $(EPICS_BASE)/config/CONFIG.Host.hp700

config/CONFIG.Host.linux-x86

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # linux-x86 is the new name for linux

config/CONFIG.Host.osf-alpha

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# osf-alpha is the new name for alpha
+-include $(EPICS_BASE)/config/CONFIG.Host.alpha

config/CONFIG.Host.sgi

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.sgi
 #
 #  This file is maintained by the EPICS community.

config/CONFIG.Host.solaris

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.solaris
 #
 #  This file is maintained by the EPICS community.
@@ -26,7 +35,8 @@ ACC = $(SPARCWORKS)/bin/cc
 ACC_ANSI = $(ACC) -Xa -v
 ACC_STRICT = $(ACC) -Xc -v
 ACC_TRAD = $(ACC) -Xs
-ACC_DEP_CFLAGS = -KPIC -D_REENTRANT 
+ACC_DEP_CFLAGS = -KPIC
+
 ACC_WARN_YES = 
 ACC_WARN_NO =  -w
 ACC_OPT_YES =  -O
@@ -36,13 +46,13 @@ ACC_SFLAGS_NO=
 ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
 ACC_SLIBS_NO=
 ACC_SHRLIB_CFLAGS_YES =
-ACC_SHRLIB_LDFLAGS_YES =  -G -h $@
+ACC_SHRLIB_LDFLAGS_YES =  -G -h $@ -z ignore -z combreloc -z lazyload
 
 # Configure OS vendor C++ compiler
 CCC = $(SPARCWORKS)/bin/CC
 CCC_NORMAL = $(CCC) +p
 CCC_STRICT = $(CCC) +p
-CCC_DEP_CFLAGS = -KPIC -D_REENTRANT 
+CCC_DEP_CFLAGS = -KPIC
 CCC_TEMPL_INST_FLAG =
 CCC_WARN_YES = +w
 CCC_WARN_NO = 
@@ -54,11 +64,16 @@ CCC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
 CCC_SLIBS_NO=
 CCC_DEPENDS_FLAG = -xM1
 CCC_SHRLIB_CFLAGS_YES =
-CCC_SHRLIB_LDFLAGS_YES =  -G -h $@
+CCC_SHRLIB_LDFLAGS_YES =  -G -h $@ -z ignore -z combreloc -z lazyload
  
 
-ARCH_DEP_CFLAGS = -DSOLARIS 
-# socket and nsl needed by libca.a
-ARCH_DEP_LDLIBS = -lsocket -lnsl
-ARCH_DEP_LDLIBS += -lposix4 -lpthread -lthread
+ARCH_DEP_CFLAGS = -DSOLARIS=$(subst 5.,,$(shell uname -r)) 
+POSIX_CPPFLAGS_YES += -D__EXTENSIONS__
+
+# socket and nsl needed by libca.a
+ARCH_DEP_LDLIBS += -lsocket -lnsl
+ARCH_DEP_LDLIBS += -lposix4 -lpthread
+
+#Allows R3.13 built extensions to load R3.14 shared libs
+SYS_DLL_LIBS_solaris += posix4 pthread Crun
 

config/CONFIG.Host.solaris-sparc

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # solaris-sparc is the new name for solaris

config/CONFIG.Host.solaris-sparc-gnu

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # solaris-sparc is the new name for solaris

config/CONFIG.Host.solaris-x86

@@ -1,66 +1,22 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.solaris-x86
 #
 #  This file is maintained by the EPICS community.
 #  Sites may override these definitions in CONFIG_SITE.Host.solaris-x86
 
-ARCH_CLASS = solaris
+-include $(EPICS_BASE)/config/CONFIG.Host.solaris
 
-# Include definitions common to all Unix archs
-include $(EPICS_BASE)/config/CONFIG.Host.UnixCommon
+# Solaris on x86
+ARCH_DEP_CFLAGS = -DSOLARIS=$(subst 5.,,$(shell uname -r))  -D_X86_  -D__EXTENSIONS__
 
-#
-# required by sun's C++ compiler
-#
-AR = ar
-_AR = $(AR) $(ARFLAGS)
-G++_AR = $(_AR)
-CCC_AR = $(CCC) -xar -o
-ARCMD = $($(CPLUSPLUS)_AR) $@
-
-RANLIB =
-
-SPARCWORKS = /opt/SUNWspro
-
-# Configure OS vendor C compiler
-ACC = $(SPARCWORKS)/bin/cc
-ACC_ANSI = $(ACC) -Xa
-ACC_STRICT = $(ACC) -Xc -v
-ACC_TRAD = $(ACC) -Xs
-ACC_DEP_CFLAGS = -KPIC -D_REENTRANT 
-ACC_WARN_YES = 
-ACC_WARN_NO =  -w
-ACC_OPT_YES =  -O
-ACC_OPT_NO = -g
-ACC_SFLAGS_YES= -Bstatic
-ACC_SFLAGS_NO=
-ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
-ACC_SLIBS_NO=
-ACC_SHRLIB_CFLAGS_YES =
-ACC_SHRLIB_LDFLAGS_YES =  -G -h $@
-
-# Configure OS vendor C++ compiler
-CCC = $(SPARCWORKS)/bin/CC
-CCC_NORMAL = $(CCC) +p
-CCC_STRICT = $(CCC) +p
-CCC_DEP_CFLAGS = -KPIC -D_REENTRANT 
-CCC_TEMPL_INST_FLAG =
-CCC_WARN_YES = +w
-CCC_WARN_NO = 
-CCC_OPT_YES =  -O
-CCC_OPT_NO = -g
-CCC_SFLAGS_YES= -Bstatic
-CCC_SFLAGS_NO=
-CCC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
-CCC_SLIBS_NO=
-CCC_DEPENDS_FLAG = -xM1
-CCC_SHRLIB_CFLAGS_YES =
-CCC_SHRLIB_LDFLAGS_YES =  -G -h $@
- 
 GCC = gcc
 G++ = g++
 
-# Solaris on x86
-ARCH_DEP_CFLAGS = -DSOLARIS  -D_X86_
-# socket and nsl needed by libca.a
-ARCH_DEP_LDLIBS = -lsocket -lnsl
-

config/CONFIG.Host.solaris-x86-gnu

@@ -0,0 +1,25 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# CONFIG.Host.solaris-x86
+#
+#  This file is maintained by the EPICS community.
+#  Sites may override these definitions in CONFIG_SITE.Host.solaris-x86
+
+-include $(EPICS_BASE)/config/CONFIG.Host.solaris
+
+# Solaris on x86
+ARCH_DEP_CFLAGS = -DSOLARIS  -D_X86_
+
+GCC = gcc
+G++ = g++
+
+ANSI=GCC
+CPLUSPLUS=G++
+

config/CONFIG.Host.sun4

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Host.sun4
 #
 #  This file is maintained by the EPICS community.

config/CONFIG.Host.sun4-sparc

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# sun4-sparc is the new name for sun4
+-include $(EPICS_BASE)/config/CONFIG.Host.sun4

config/CONFIG.Host.win32-x86

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # win32-x86 is the new name for WIN32

config/CONFIG.Host.win32-x86-borland

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# win32-x86-borland is the new name for Borland
+-include $(EPICS_BASE)/config/CONFIG.Host.Borland

config/CONFIG.LynxOS

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 # This file contains definitions for Vx builds
@@ -20,7 +29,6 @@ CXX = g++
 # the override definitions.
  
 # Tornado directory definitions
-VX_CONFIG_DIR_YES =
 VX_INCLUDE_YES =
 VX_GNU_YES =
 VX_GNU_BIN_YES =
@@ -28,14 +36,12 @@ VX_GNU_LIB_YES =
 
 
 # pre Torando directory definitions
-VX_CONFIG_DIR_NO =
 VX_INCLUDE_NO =
 VX_GNU_NO =
 VX_GNU_BIN_NO =
  
 # directory definitions
 VX_DIR =
-VX_CONFIG_DIR =
 VX_INCLUDE =
 VX_GNU = 
 

config/CONFIG.Vx

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 # This file contains definitions for Vx builds
@@ -15,21 +24,18 @@ OS_CLASS = vxWorks
 # the override definitions.
 
 # Tornado directory definitions
-VX_CONFIG_DIR_YES = $(VX_DIR)/target/config
 VX_INCLUDE_YES = $(VX_DIR)/target/h
 VX_GNU_YES = $(VX_DIR)/host/$(WIND_HOST_TYPE)
 VX_GNU_BIN_YES = $(VX_GNU)/bin
 VX_GNU_LIB_YES = $(VX_GNU)/lib
 
 # pre Torando directory definitions
-VX_CONFIG_DIR_NO = $(VX_DIR)/config
 VX_INCLUDE_NO = $(VX_DIR)/h
 VX_GNU_BIN_NO = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/bin
 VX_GNU_LIB_NO = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/lib
 
 # directory definitions
 VX_DIR = $(VX_DIR_$(TORNADO))
-VX_CONFIG_DIR = $(VX_CONFIG_DIR_$(TORNADO))
 VX_INCLUDE = $(VX_INCLUDE_$(TORNADO))
 VX_GNU = $(VX_GNU_$(TORNADO))
 GNU_BIN = $(VX_GNU_BIN_$(TORNADO))
@@ -90,6 +96,7 @@ LD_CXX = $(LD_$(CPLUSPLUS))
 # Override flags in CONFIG_COMMON
 GCC_DEP_CFLAGS = -D_REENTRANT
 G++_DEP_CFLAGS = -D_REENTRANT
+POSIX_CPPFLAGS_YES = -D_POSIX_SOURCE
 
 #--------------------------------------------------
 # Operating system flags

config/CONFIG.Vx.frc40

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 # This file is maintained by the EPICS community.

config/CONFIG.Vx.frc5ce

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG.Vx.frc5ce
 
 # Vx GNU cross compiler suffix

config/CONFIG.Vx.hkbaja47

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # $Id$
 #

config/CONFIG.Vx.hkbaja60

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # $Id$
 #

config/CONFIG.Vx.hkv2f

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # $Id$
 #

config/CONFIG.Vx.mv147

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # $Id$
 #

config/CONFIG.Vx.mv1604

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 # This file is maintained by the EPICS community.

config/CONFIG.Vx.mv162

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # $Id$
 #

config/CONFIG.Vx.mv162lc

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # $Id$
 #

config/CONFIG.Vx.mv167

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # $Id$
 #

config/CONFIG.Vx.mv177

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # $Id$
 #

config/CONFIG.Vx.mv2700

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # $Id$
 #

config/CONFIG.Vx.niCpu030

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 #  CONFIG.Vx.niCpu030
 #

config/CONFIG.Vx.pc486

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # CONFIG.Vx.pc486
 #

config/CONFIG.Vx.pcPentium

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # CONFIG.Vx.pentium
 #

config/CONFIG.Vx.ppc603

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 # This file is maintained by the EPICS community.

config/CONFIG.Vx.ppc604

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 # This file is maintained by the EPICS community.

config/CONFIG.Vx.simpc

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # CONFIG.Vx.simpc
 #

config/CONFIG.Vx.vxWorks-486

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # vxWorks-486 is the new R3.14 name for pc486

config/CONFIG.Vx.vxWorks-68040

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # vxWorks-68040 is the new R3.14 name for mv167

config/CONFIG.Vx.vxWorks-68040lc

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # vxWorks-68040lc is the new R3.14 name for mv162lc

config/CONFIG.Vx.vxWorks-68060

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # vxWorks-68060 is the new R3.14 name for mv177

config/CONFIG.Vx.vxWorks-ppc604

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # vxWorks-ppc604 is the new R3.14 name for ppc604

config/CONFIG.Vx.vxipc

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 # CONFIG.Vx.VXIpc
 #

config/CONFIG_BASE

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -49,3 +58,25 @@ endif
 
 EPICS_BASE = $(INSTALL_LOCATION)
 
+Com_DIR             = $(EPICS_BASE_LIB)
+asHost_DIR          = $(EPICS_BASE_LIB)
+asIoc_DIR           = $(EPICS_BASE_LIB)
+ca_DIR              = $(EPICS_BASE_LIB)
+cas_DIR             = $(EPICS_BASE_LIB)
+dbIoc_DIR           = $(EPICS_BASE_LIB)
+dbStaticHost_DIR    = $(EPICS_BASE_LIB)
+dbStaticIoc_DIR     = $(EPICS_BASE_LIB)
+dbtoolsIoc_DIR      = $(EPICS_BASE_LIB)
+gdd_DIR             = $(EPICS_BASE_LIB)
+iocsh_DIR           = $(EPICS_BASE_LIB)
+miscIoc_DIR         = $(EPICS_BASE_LIB)
+recIoc_DIR          = $(EPICS_BASE_LIB)
+registryIoc_DIR     = $(EPICS_BASE_LIB)
+rsrvIoc_DIR         = $(EPICS_BASE_LIB)
+softDevIoc_DIR      = $(EPICS_BASE_LIB)
+testDevIoc_DIR      = $(EPICS_BASE_LIB)
+recIocObj_DIR       = $(EPICS_BASE_LIB)
+softDevIocObj_DIR   = $(EPICS_BASE_LIB)
+testDevIocObj_DIR   = $(EPICS_BASE_LIB)
+iocCore_DIR         = $(EPICS_BASE_LIB)
+

config/CONFIG_BASE_VERSION

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -11,16 +20,14 @@ EPICS_VERSION=3
 EPICS_REVISION=14
 EPICS_MODIFICATION=0
 EPICS_UPDATE_NAME=beta
-EPICS_UPDATE_LEVEL=1
+EPICS_UPDATE_LEVEL=2
 
 EPICS_LOCAL_NAME=B
 EPICS_LOCAL_VERSION=0
 
-CVS_DATE="\$$Date$$"
-CVS_TAG="\$$Name$$"
-
 EPICS_VERSION_STRING="EPICS Version ${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}.$(EPICS_LOCAL_NAME)$(EPICS_LOCAL_VERSION)"
 
 CVS_DATE="\$$Date$$"
+CVS_TAG="\$$Name$$"
 
 BASE_3_14=YES

config/CONFIG_COMMON

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 #  $Id$
 #
@@ -79,9 +88,10 @@ GCC_ANSI = $(GCC) -ansi
 GCC_STRICT = $(GCC) -ansi -pedantic
 GCC_TRAD = $(GCC) -traditional
 GCC_DEP_CFLAGS = -fPIC -D_REENTRANT
+
 GCC_WARN_YES = -Wall
 GCC_WARN_NO = -w
-GCC_OPT_YES = -O
+GCC_OPT_YES = -O3
 GCC_OPT_NO = -g
 GCC_SFLAGS_YES = -static
 GCC_SFLAGS_NO =
@@ -100,7 +110,7 @@ G++_WARN_YES = -Wall \
       -Wwrite-strings -Wconversion -Wstrict-prototypes\
       -Wpointer-arith -Winline
 G++_WARN_NO = -w
-G++_OPT_YES = -O
+G++_OPT_YES = -O3
 G++_OPT_NO = -g
 G++_SFLAGS_YES = -static
 G++_SFLAGS_NO =
@@ -175,9 +185,18 @@ TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
 #--------------------------------------------------
 # Epics includes (CONFIG.Vx will override OS_CLASS)
 OS_CLASS = $(ARCH_CLASS)
-EPICS_INCLUDES = -I$(INSTALL_INCLUDE) -I$(INSTALL_INCLUDE)/os/$(OS_CLASS)
+EPICS_INCLUDES = -I$(INSTALL_INCLUDE)/os/$(OS_CLASS) -I$(INSTALL_INCLUDE)
 EPICS_DBDFLAGS = -I $(INSTALL_LOCATION)/dbd
 
+#--------------------------------------------------
+# Posix flags
+POSIX=YES
+POSIX_CPPFLAGS_YES += -D_POSIX_C_SOURCE=199506L
+POSIX_LDLIBS_YES +=
+
+POSIX_CPPFLAGS += $(POSIX_CPPFLAGS_$(POSIX))
+POSIX_LDLIBS += $(POSIX_LDLIBS_$(POSIX))
+
 #--------------------------------------------------
 # Warnings flags  (CONFIG.Vx will override)
 WARN_CFLAGS = $($(ANSI)_WARN_$(HOST_WARN))
@@ -222,9 +241,9 @@ LDFLAGS = $(OPT_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS)\
  $(ARCH_DEP_LDFLAGS) $(STATIC_LDFLAGS) $(OP_SYS_LDFLAGS)
 
 LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS)\
- $(STATIC_LDLIBS) $(OP_SYS_LDLIBS)
+ $(STATIC_LDLIBS) $(OP_SYS_LDLIBS) $(POSIX_LDLIBS)
 
-CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS)
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS) $(ARCH_DEP_CPPFLAGS) $(POSIX_CPPFLAGS)
 
 CPPSNCFLAGS = $(INCLUDES)
 

config/CONFIG_COMPAT

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 # $Id$
 #
@@ -5,13 +14,15 @@
 
 #Syntax:
 # ARCH_<host_arch> = <epics_host_arch>
+ARCH_solarisGnu = solaris-sparc-gnu
 ARCH_solaris = solaris-sparc
 ARCH_sun4 = sun4-sparc
 ARCH_Linux = linux-x86
 ARCH_WIN32 = win32-x86
 ARCH_hp700 = hpux-m68k
-ARCH_hp700 = osf-alpha
+ARCH_alpha = osf-alpha
 ARCH_Borland = win32-x86-borland
+ARCH_cygwin32 = win32-x86-cygwin
 
 ifndef EPICS_HOST_ARCH
 ifdef HOST_ARCH
@@ -24,13 +35,13 @@ endif
 HOST_ARCH := $(EPICS_HOST_ARCH)
 
 # Note: 
-# The EPICS_HOST_ARCH solaris-sparc-gnu is new for base release R3.14
+# The EPICS_HOST_ARCH solaris-<arch>-gnu is new for base release R3.14
 # so existing R3.13 applications, when HOST_ARCH is set to solaris and
-# when built with R3.14, will look for base solaris-sparc directories
-# and not solaris-sparc-gnu. If you plan to build R3.13 applications 
-# against a solaris-sparc-gnu built R3.14 base, you should set
+# when built with R3.14, will look for base solaris-<arch> directories
+# and not solaris-<arch>-gnu. If you plan to build R3.13 applications 
+# against a solaris-<arch>-gnu built R3.14 base, you should set
 # ANSI=GCC and CPLUSPLUS=G++ in base/config/CONFIG_SITE.Host.solaris
-# and change ARCH_solaris=solaris-sparc to ARCH_solaris=solaris-sparc-gnu
+# and change ARCH_solaris=solaris-<arch> to ARCH_solaris=solaris-<arch>-gnu
 # in base/config/CONFIG_COMPAT.
 
 

config/CONFIG_ENV

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #	$Id$
 #	Author:	Andrew Johnson
 #	Date:	20 April 1995

config/CONFIG_HOST_ARCH.Borland

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  CONFIG_HOST_ARCH.Borland
 #
 
@@ -15,6 +24,9 @@ ECHO=echo
 
 WIND_HOST_TYPE = x86-win32
  
-# 	Use std path variables from ms
+# Does not work if using cygwin make
+# because HOME is always defined
+ifndef HOME
 HOME = $(HOMEDRIVE)$(HOMEPATH)
+endif
 

config/CONFIG_HOST_ARCH.Darwin

@@ -0,0 +1,15 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+#  CONFIG_HOST_ARCH.Darwin
+#
+# Override values in CONFIG.Vx
+
+# Include definitions common to all Unix archs
+include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.UnixCommon

config/CONFIG_HOST_ARCH.Linux

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  CONFIG_HOST_ARCH.Linux
 #
 # Override values in CONFIG.Vx

config/CONFIG_HOST_ARCH.LynxOS

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  CONFIG_HOST_ARCH.LynxOS
 #
 # Override values in CONFIG.LynxOS

config/CONFIG_HOST_ARCH.UnixCommon

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 
 #  CONFIG_HOST_ARCH.UnixCommon
 #

config/CONFIG_HOST_ARCH.WIN32

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  CONFIG_HOST_ARCH.WIN32
 #
 
@@ -14,6 +23,9 @@ ECHO=echo
 
 WIND_HOST_TYPE = x86-win32
  
-# 	Use std path variables from ms
+# Does not work if using cygwin make
+# because HOME is always defined
+ifndef HOME
 HOME = $(HOMEDRIVE)$(HOMEPATH)
+endif
 

config/CONFIG_HOST_ARCH.alpha

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  CONFIG_HOST_ARCH.alpha
 #
 # Override values in CONFIG.Vx

config/CONFIG_HOST_ARCH.cygwin32

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # CONFIG_HOST_ARCH.cygwin32
 #
 # This file is maintained by the EPICS community.

config/CONFIG_HOST_ARCH.darwin-ppc

@@ -0,0 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.Darwin

config/CONFIG_HOST_ARCH.hp700

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  CONFIG_HOST_ARCH.hp700
 #
 # Override values in CONFIG.Vx

config/CONFIG_HOST_ARCH.hpux-m68k

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# hpux-m68k is the new name for hp700
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.hp700

config/CONFIG_HOST_ARCH.linux-x86

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # linux-x86 is the new name for linux

config/CONFIG_HOST_ARCH.osf-alpha

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# osf-alpha is the new name for alpha
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.alpha

config/CONFIG_HOST_ARCH.sgi

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  CONFIG_HOST_ARCH.sgi
 #
 # Override values in CONFIG.Vx

config/CONFIG_HOST_ARCH.solaris

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  CONFIG_HOST_ARCH.solaris
 #
 # Override values in CONFIG.Vx

config/CONFIG_HOST_ARCH.solaris-sparc

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # solaris-sparc is the new name for solaris

config/CONFIG_HOST_ARCH.solaris-sparc-gnu

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  $Id$
 
 -include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solaris

config/CONFIG_HOST_ARCH.solaris-x86

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  CONFIG_HOST_ARCH.solaris-x86
 #
 # Override values in CONFIG.Vx

config/CONFIG_HOST_ARCH.solaris-x86-gnu

@@ -0,0 +1,4 @@
+#  $Id$
+
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.solaris
+

config/CONFIG_HOST_ARCH.sun4

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #  CONFIG_HOST_ARCH.sun4
 #
 # Override values in CONFIG.Vx

config/CONFIG_HOST_ARCH.sun4-sparc

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# sun4-sparc is the new name for sun4
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.sun4

config/CONFIG_HOST_ARCH.win32-x86

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 # win32-x86 is the new name for WIN32

config/CONFIG_HOST_ARCH.win32-x86-borland

@@ -0,0 +1,13 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
+# $Id$
+
+# win32-x86-borland is the new name for Borland
+-include $(EPICS_BASE)/config/CONFIG_HOST_ARCH.Borland

config/CONFIG_SITE.Host.darwin-ppc

@@ -0,0 +1,5 @@
+# $Id$
+
+-include $(EPICS_BASE)/config/CONFIG_SITE.Host.Darwin
+
+SHARED_LIBRARIES=NO

config/CONFIG_SITE.Host.hpux-m68k

@@ -0,0 +1,4 @@
+# $Id$
+
+# hpux-m68k is the new name for hp700
+-include $(EPICS_BASE)/config/CONFIG_SITE.Host.hp700

config/CONFIG_SITE.Host.linux-x86

@@ -3,4 +3,5 @@
 # linux-x86 is the new name for linux
 -include $(EPICS_BASE)/config/CONFIG_SITE.Host.Linux
 
-SHARED_LIBRARY=YES
+#SHARED_LIBRARIES=YES
+

config/CONFIG_SITE.Host.win32-x86-borland

@@ -0,0 +1,4 @@
+# $Id$
+
+# win32-x86-borland is the new name for Borland
+-include $(EPICS_BASE)/config/CONFIG_SITE.Host.Borland

config/CONFIG_SITE.Vx.linux-x86

@@ -0,0 +1,6 @@
+# $Id$
+#
+# This file contains overrides for Vx builds
+
+-include $(EPICS_BASE)/config/CONFIG_SITE.Vx.Linux
+

config/Makefile

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 #
 # $Id$
 #
@@ -11,8 +20,5 @@ INSTALL_CONFIG = $(INSTALL_LOCATION)/config
 CONFIGS += $(subst ../,,$(wildcard ../CONFIG*))
 CONFIGS += $(subst ../,,$(wildcard ../RULES*))
 
-SCRIPTS_HOST += $(wildcard ../tools/*.pl)
-SCRIPTS_HOST += ../tools/installEpics
-
 include $(TOP)/configure/RULES
 

config/RULES.Db

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 #	Rules for making things related to databases

config/RULES.Host

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 #
 #	Rules for making things specified in Makefile.Host
@@ -225,7 +234,7 @@ endif
 #	(convenience for extensions and applications)
 ifneq ($(EPICS_BASE),$(TOP))
 ifneq ($(EPICS_BASE),$(INSTALL_LOCATION))
-EPICS_INCLUDES += -I$(EPICS_BASE_INCLUDE) -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS)
+EPICS_INCLUDES += -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS) -I$(EPICS_BASE_INCLUDE)
 EPICS_DBDFLAGS += -I $(EPICS_BASE)/dbd
 endif
 endif
@@ -400,7 +409,7 @@ endif
 PRODNAME_OBJS=$(addsuffix $(OBJ), $(basename $(PRODNAME_SRCS)))
 PRODNAME_RESS=$(addsuffix $(RES), $(basename $(PRODNAME_RCS)))
 
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 $(PRODNAME): $(PRODNAME_OBJS) $(PRODNAME_RESS)
 	@$(RM) $@
 	$(PRODNAME_LINKER) $(PRODNAME_OBJS) , $@ ,,$(LINKLIBS) $(subst /,\\,$(LDLIBS)),, $(PRODNAME_RESS)
@@ -461,7 +470,8 @@ JAR_OPTIONS = cvf
 ifdef MANIFEST
 JAR_OPTIONS = cvmf
 endif
-JAR_DEPFILES +=  $(wildcard $(JAR_INPUT) $(addsuffix /*,$(JAR_INPUT)))
+#JAR_DEPFILES +=  $(wildcard $(JAR_INPUT) $(addsuffix /*,$(JAR_INPUT)))
+JAR_DEPFILES +=  $(JAR_INPUT)
 
 $(DIRECTORY_TARGETS) :
 	$(MKDIR) $@
@@ -490,7 +500,7 @@ $(JAR):%.jar:  $(JAR_DEPFILES)
 
 $(INSTALL_JAVA)/%.jar: %.jar
 	@echo "Installing jar file $@"
-	$(INSTALL) -d -m 644 $< $(@D)
+	@$(INSTALL) -d -m 644 $< $(@D)
 
 $(PACKAGE)_%.h:$(INSTALL_JAVA)/$(PACKAGE)/%.class
 	$(JAVAHCMD) $(PACKAGE).$*
@@ -519,7 +529,7 @@ ifneq ($(strip $(LIBSRCS) $(SRCS) $(COND_PROD_SRCS) $(SRCS.c) $(SRCS.cc)),)
 	$(DEPENDS_RULE)
 endif
 
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 %$(EXE): %.c
 	@$(RM) $@
 	$(COMPILE.c)  $<
@@ -656,29 +666,29 @@ $(INSTALL_DBD)/%: ../%
  
 %Record.h: %Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 	        $(DBDFLAGS)  $<
  
 %Record.h: ../%Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 	        $(DBDFLAGS)  $<
  
 menu%.h: menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
  
 menu%.h: ../menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
  
 bpt%.dbd: bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
  
 bpt%.dbd: ../bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
  
 # Patch for old applications
 ifdef USER_DBDFLAGS
@@ -689,14 +699,14 @@ ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo Expanding dbd
 	@$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbExpand$(EXE) $(DBDFLAGS) $< > $@
+	$(EPICS_BASE_HOST_BIN)/dbExpand$(EXE) $(DBDFLAGS) $< > $@
 
 ifneq (,$(wildcard ../base.dbd))
 $(DBDNAME): ../base.dbd
 endif
 endif
 
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 $(DLL_LINK_LIBNAME) $(SHRLIBNAME): $(LIBOBJS) $(LIBNAME_RESS)
 	$(LINK.shrlib) $(LIBOBJS) , $@ ,,$(LINKLIBS) $(subst /,\\,$(DLL_LDLIBS)), $(DLL_DEF_FLAG), $(LIBNAME_RESS)
 
@@ -705,7 +715,7 @@ $(DLL_LINK_LIBNAME) $(SHRLIBNAME): $(LIBOBJS) $(LIBNAME_RESS)
 	$(LINK.shrlib) $(LIBOBJS) $(DLL_LDLIBS) $(LIBNAME_RESS)
 
 endif
-ifeq ($(HOST_ARCH),Borland)
+ifdef BORLANDC
 # rule for lib (archive of object files) creation
 $(LIBNAME): $(LIBOBJS)
 	$(RM) $@
@@ -747,7 +757,7 @@ $(INSTALL_LIB)/%.lib: %.lib
 
 $(INSTALL_SHRLIB)/lib%: lib%
 	@echo "Installing library $@"
-	@$(INSTALL) -d -m 555 $< $(INSTALL_SHRLIB)
+	@$(INSTALL_LIBRARY) -d -m 555 $< $(INSTALL_SHRLIB)
 ifdef SHRLIB_VERSION
 	@$(RM) $(@:%.$(SHRLIB_VERSION)=%)
 	ln -s $< $(@:%.$(SHRLIB_VERSION)=%) 

config/RULES.Unix

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 INCREC +=$(RECTYPES) $(MENUS)
@@ -179,29 +188,29 @@ $(INSTALL_DBD)/%: ../%
  
 %Record.h: %Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH \
 	        $(DBDFLAGS)  $<
  
 %Record.h: ../%Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH \
 	        $(DBDFLAGS)  $<
  
 menu%.h: menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH $<
  
 menu%.h: ../menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH $<
  
 bpt%.dbd: bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt $<
  
 bpt%.dbd: ../bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt $<
  
 # Patch for old applications
 ifdef USER_DBDFLAGS
@@ -212,7 +221,7 @@ ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo expanding dbd
 	@$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbExpand $(DBDFLAGS) $< > $@
+	$(EPICS_BASE_HOST_BIN)/dbExpand $(DBDFLAGS) $< > $@
 
 ifneq (,$(wildcard ../base.dbd))
 $(DBDNAME): ../base.dbd

config/RULES.Vx

@@ -1,3 +1,12 @@
+#*************************************************************************
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
+#     National Laboratory.
+# Copyright (c) 2002 The Regents of the University of California, as
+#     Operator of Los Alamos National Laboratory.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
+#*************************************************************************
 # $Id$
 
 ifneq ($(strip $(LIBOBJS_$(ARCH_CLASS))),)
@@ -39,7 +48,7 @@ MAN_DIRECTORY_TARGETS = $(foreach n, $(MANLIST),$(INSTALL_MAN)/man$(n))
 #	(convenience for extensions and applications)
 ifneq ($(EPICS_BASE),$(TOP))
 ifneq ($(EPICS_BASE),$(INSTALL_LOCATION))
-EPICS_INCLUDES += -I$(EPICS_BASE_INCLUDE) -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS)
+EPICS_INCLUDES += -I$(EPICS_BASE_INCLUDE)/os/$(OS_CLASS) -I$(EPICS_BASE_INCLUDE)
 EPICS_DBDFLAGS += -I $(EPICS_BASE)/dbd
 endif
 endif
@@ -206,29 +215,29 @@ $(INSTALL_DBD)/%: ../%
 
 %Record.h: %Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 		$(DBDFLAGS)  $<
 
 %Record.h: ../%Record.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH$(EXE) \
+	$(EPICS_BASE_HOST_BIN)/dbToRecordtypeH$(EXE) \
 		$(DBDFLAGS)  $<
 
 menu%.h: menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
 
 menu%.h: ../menu%.dbd
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/dbToMenuH$(EXE) $<
 
 bpt%.dbd: bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
 
 bpt%.dbd: ../bpt%.data
 	$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt$(EXE) $<
+	$(EPICS_BASE_HOST_BIN)/makeBpt$(EXE) $<
 
 # Patch for old applications
 ifdef USER_DBDFLAGS
@@ -239,7 +248,7 @@ ifdef DBDEXPAND
 $(DBDNAME): ../$(DBDEXPAND)
 	@echo Expanding dbd
 	@$(RM) $@
-	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbExpand$(EXE) $(DBDFLAGS) $< > $@
+	$(EPICS_BASE_HOST_BIN)/dbExpand$(EXE) $(DBDFLAGS) $< > $@
 endif
 
 $(LIBNAME): $(LIBOBJS)