Bug fix

Allow C style escape sequences
Fix long vx memory free list problem
Fix most compiler warning messages

COPYRIGHT_Combined

@@ -0,0 +1,21 @@
+/*      Experimental Physics and Industrial Control System (EPICS)
+ *
+ *      Copyright 1991, the Regents of the University of California,
+ *      and the University of Chicago Board of Governors.
+ *
+ *      This software was produced under  U.S. Government contracts:
+ *      (W-7405-ENG-36) at the Los Alamos National Laboratory,
+ *      and (W-31-109-ENG-38) at Argonne National Laboratory.
+ *
+ *      Initial development by:
+ *              The Controls and Automation Group (AT-8)
+ *              Ground Test Accelerator
+ *              Accelerator Technology Division
+ *              Los Alamos National Laboratory
+ *
+ *      Co-developed with
+ *              The Controls and Computing Group
+ *              Accelerator Systems Division
+ *              Advanced Photon Source
+ *              Argonne National Laboratory
+ ***********************************************************************/

MakeRelease

@@ -10,6 +10,27 @@
 #    [-b] - For fully built release
 #
 # $Log$
+# Revision 1.9  1996/09/04 21:41:36  jba
+# Top level dir no longer passed to MakeRelease
+#
+# Revision 1.8  1996/07/02 13:45:09  jba
+# Added dbd and base/config dirs. Removed epics/config and base/rec.
+#
+# Revision 1.7  1996/06/25 21:54:42  jba
+# Command line parm now base dir
+#
+# Revision 1.6  1996/06/07 19:19:10  jba
+# MakeRelease is now in release tar file.
+#
+# Revision 1.5  1996/03/04 21:03:48  jba
+# epicsVersion.h now in src/include.
+#
+# Revision 1.4  1996/02/20 21:03:53  jba
+# Updated README files to reflect directory changes and new installEpics.
+#
+# Revision 1.3  1995/10/03  15:42:26  jba
+# Added *COPYRIGHT* files to release tar file.
+#
 # Revision 1.2  1995/08/28  15:49:54  jba
 # Added startup directory to release tar file
 #
@@ -52,60 +73,50 @@
 #
 #
 
-EPICS=${1};
 
-if [ ! -d include -o ! -d src ]; then
-	echo "Cannot find src or include, are you at the top of EPICS base ?"
+if [ ! -d src ]; then
+	echo "Cannot find src directory, are you at the top of EPICS base ?"
 	exit 1
 fi
 
-cd $EPICS/base
 
 FULLY_BUILT=NO
-if [ "${2}" = "-b" ]; then
+if [ "${1}" = "-b" ]; then
 	FULLY_BUILT=YES
 	shift
+	if [ "${1}" != "." ]; then
+		echo "TOP: Cannot create a fully built release.";
+		exit 1;
+	fi
 fi
 
-# Retrieve EPICS release string from include/epicsVersion.h
-grep EPICS_VERSION_STRING include/epicsVersion.h > /dev/null 2>&1 || ERR=1;
+# Retrieve EPICS release string from config/CONFIG_BASE_VERSION
+. config/CONFIG_BASE_VERSION
 
-if [ "$ERR" = "1" ];
+if [ -z "${EPICS_VERSION}" ];
 	then
-		echo "TOP:  Cannot retrieve release number from include/epicsVersion.h";
+		echo "TOP:  Cannot retrieve release number from config/CONFIG_BASE_VERSION";
 		exit 1;
 	fi
 
-RELS=`grep "EPICS_VERSION_STRING" include/epicsVersion.h \
-		| sed   -e 's-.*Version--' \
-			-e 's-[  ][      ]*--g' \
-         		-e 's-".*--' \
-                	-e 's-\.0$--'`;
- 
-if [ -z "${RELS}" ];
-	then
-		echo "TOP: Cannot retrieve release number from include/epicsVersion.h";
-		exit 1;
-	fi
-
-RELS="R${RELS}";
+RELS="R${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}";
 
 echo TOP: Creating ../${RELS}.Tar;
 
 if [ -f ${RELS}.Tar* ];
 	then
 		echo "TOP: This release has already been created.";
-		echo "TOP: Remove Tar file or edit include/epicsVersion.h.";
+		echo "TOP: Remove Tar file or edit config/CONFIG_BASE_VERSION.";
 		exit 1;
 	fi
 
 # Create list of files and dirs to include in Tar file
 
-cd $EPICS
+cd ..
 
 ls base/README* | xargs tar cvf ${RELS}.Tar
 
-ls base/Makefile* > /tmp/make_release.out.$$;
+ls base/Make* > /tmp/make_release.out.$$;
 
 ls base/*COPYRIGHT* >> /tmp/make_release.out.$$;
 
@@ -115,22 +126,29 @@ if [ -d startup ];
 				>> /tmp/make_release.out.$$;
 	fi
 
-find config base/include base/man base/tools -name CVS -prune -o \
-		! -type d -print >> /tmp/make_release.out.$$;
-
 # binary / library / default.dctsdr / <rec>Record.h / etc.
 if [ $FULLY_BUILT = "YES" ];
 	then
+		find base/include -name CVS -prune -o ! -type d -print \
+				>> /tmp/make_release.out.$$;
+
+		find base/man -name CVS -prune -o ! -type d -print \
+				>> /tmp/make_release.out.$$;
+
 		find base/bin -name CVS -prune -o ! -type d -print \
 				>> /tmp/make_release.out.$$;
 
 		find base/lib -name CVS -prune -o ! -type d -print \
 				>> /tmp/make_release.out.$$;
 
-		find base/rec -name CVS -prune -o ! -type d -print \
+		find base/dbd -name CVS -prune -o ! -type d -print \
 				>> /tmp/make_release.out.$$;
+
 	fi
 
+find base/config -name CVS -prune -o -name SCCS -prune -o ! -type d -print \
+		| grep -v '/O\..*$' >> /tmp/make_release.out.$$
+
 find base/src -name CVS -prune -o -name SCCS -prune -o ! -type d -print \
 		| grep -v '/O\..*$' >> /tmp/make_release.out.$$
 

Makefile

@@ -1,5 +1,4 @@
 #
-#
 # Top Level EPICS Makefile
 #        by Matthew Needes and Mike Bordua
 #
@@ -11,136 +10,25 @@
 #    However, the release dependencies DOES require a complete
 #         install because the release.% syntax is illegal.
 #
-# $Log$
-# Revision 1.23  1995/02/13  15:00:09  jba
-# Changed include file from CONFIG_SITE to CONFIG
-#
-# Revision 1.22  1994/11/14  23:12:17  tang
-# Replace ARCH_TYPE with .
-#
-# Revision 1.1.1.1  1994/11/09  01:08:53  epics
-# Import of R3.12.0Beta
-#
-# Revision 1.18  1994/10/13  19:44:34  mda
-# Introduce temporary symbol (ARCH_TYPE=$$ARCH) and use in later targets/rules
-# to avoid problem with $* symbol resolution in some versions of gnumake.
-#
-# Revision 1.17  1994/10/05  18:45:57  jba
-# Modified syntax of makefile usage
-#
-# Revision 1.16  1994/09/09  17:32:27  jba
-# Cleanup of files
-#
-# Revision 1.15  1994/09/08  17:25:39  mcn
-# Changed clean to tools/Clean.  Added "uninstall" dependency.
-#
-# Revision 1.14  1994/09/07  20:42:19  jba
-# Minor changes
-#
-# Revision 1.13  1994/09/07  19:15:17  jba
-# Modified to eork with extensions and do depends
-#
-# Revision 1.12  1994/08/21  00:55:51  mcn
-# New stuff.
-#
-# Revision 1.11  1994/08/19  15:38:01  mcn
-# Dependencies are now generated with a "make release".
-#
-# Revision 1.10  1994/08/12  18:51:29  mcn
-# Added Log and/or Id.
-#
+# $Id$
 #
 
-EPICS=..
-include $(EPICS)/config/CONFIG
+TOP=.
+include $(TOP)/config/CONFIG_BASE
 
-all: install
+DIRS = src config
 
-build:
-	@(for ARCH in ${BUILD_ARCHS};					\
-		do							\
-			ARCH_TYPE=$$ARCH				\
-			${MAKE} ${MFLAGS} $@.$$ARCH;			\
-		done)
-
-install:
-	@(for ARCH in ${BUILD_ARCHS};					\
-		do							\
-			ARCH_TYPE=$$ARCH				\
-			${MAKE} ${MFLAGS} $@.$$ARCH;			\
-		done)
-
-depends:
-	@(for ARCH in ${BUILD_ARCHS};					\
-		do							\
-			ARCH_TYPE=$$ARCH				\
-			${MAKE} ${MFLAGS} $@.$$ARCH;			\
-		done)
-
-clean:
-	@(for ARCH in ${BUILD_ARCHS};					\
-		do							\
-			ARCH_TYPE=$$ARCH				\
-			${MAKE} ${MFLAGS} $@.$$ARCH;			\
-		done)
-
-uninstall:
-	@(for ARCH in ${BUILD_ARCHS};					\
-		do							\
-			ARCH_TYPE=$$ARCH				\
-			${MAKE} ${MFLAGS} $@.$$ARCH;			\
-		done)
+include $(TOP)/config/RULES_TOP
 
 release: 
 	@echo TOP: Creating Release...
-	@./MakeRelease ${EPICS}
+	@./MakeRelease
 
-built_release: install
+built_release:
 	@echo TOP: Creating Fully Built Release...
-	@./MakeRelease ${EPICS} -b
+	@./MakeRelease -b $(INSTALL_LOCATION)
 
-#  Notes for single architecture build rules:
-#    CheckArch only has to be run for dirs.% .  That
-#    way it will only be run ONCE when filtering down
-#    dependencies.
-#
-#  CheckArch does not have to be run for cleans
-#    because you might want to eliminate binaries for
-#    an old architecture.
-
-# DIRS RULE  syntax:  make depends.arch
-#              e.g.:  make depends.mv167
-#
-#  Create dependencies for an architecture.  We MUST
-#     do this separately for each architecture because
-#     some things may be included on a per architecture 
-#     basis.
-
-build.%:
-	@echo $*: Building
-	@${MAKE} ${MFLAGS} T_A=$* -f Makefile.subdirs build
-
-install.%:
-	@echo $*: Installing
-	@${MAKE} ${MFLAGS} T_A=$* -f Makefile.subdirs install
-
-depends.%:
-	@echo $*: Performing Make Depends
-	@${MAKE} ${MFLAGS} T_A=$* -f Makefile.subdirs depends
-
-# Illegal Syntax
-
-release.%:
-	@echo
-	@echo "The release.arch syntax is not supported by this build."
-	@echo "   Use 'make release' or 'make built_release' instead."
-	@echo
-
-uninstall.%:
-	@echo "TOP: Uninstalling $* "
-	@rm -rf ./bin/$* ./lib/$* rec.bak rec
-
-clean.%:
-	@echo "TOP: Cleaning $* "
-	@find src -type d -name "O.$*" -prune -exec rm -rf {} \;
+uninstall::
+	@DIR1=`pwd`;cd $(INSTALL_LOCATION);DIR2=`pwd`;cd $$DIR1;\
+	if [ "$$DIR1" != "$$DIR2" ]; then $(RMDIR) $(INSTALL_LOCATION)/config; fi
 

Makefile.subdirs

@@ -1,76 +0,0 @@
-#
-# base $Id$
-#
-# EPICS Makefile For Subdirectory Recursions
-#    by Matthew Needes and Mike Bordua
-#
-# $Log$
-# Revision 1.13  1994/09/09  17:32:29  jba
-# Cleanup of files
-#
-# Revision 1.12  1994/09/08  17:25:41  mcn
-# Changed clean to tools/Clean.  Added "uninstall" dependency.
-#
-# Revision 1.11  1994/09/07  19:15:19  jba
-# Modified to eork with extensions and do depends
-#
-# Revision 1.10  1994/08/21  00:55:52  mcn
-# New stuff.
-#
-# Revision 1.9  1994/08/19  15:38:03  mcn
-# Dependencies are now generated with a "make release".
-#
-# Revision 1.8  1994/08/12  18:51:28  mcn
-# Added Log and/or Id.
-#
-#
-
-EPICS=..
-include $(EPICS)/config/CONFIG_BASE
-
-all: build
-
-build: dirs
-	@(for DIR in ${DIRS};						\
-		do							\
-			TMP=`pwd`; echo "${T_A}: $@: $$DIR";	 	\
-			cd $$DIR/O.${T_A}; ${MAKE} ${MFLAGS} $@;	\
-			cd $$TMP;					\
-		done)
-
-install: dirs
-	@(for DIR in ${DIRS};						\
-		do							\
-			TMP=`pwd`; echo "${T_A}: $@: $$DIR";	 	\
-			cd $$DIR/O.${T_A}; ${MAKE} ${MFLAGS} $@;	\
-			cd $$TMP;					\
-		done)
-
-depends: dirs
-	@(for DIR in ${DIRS};						\
-		do							\
-			TMP=`pwd`; echo "${T_A}: $@: $$DIR";	 	\
-			cd $$DIR/O.${T_A}; ${MAKE} ${MFLAGS} $@;	\
-			cd $$TMP;					\
-		done)
-
-dirs:
-	@echo ${T_A}: Creating Directories 
-	@for DIR in ${DIRS};						\
-		do							\
-			TMP=`pwd`; 	\
-			cd $$DIR ;	\
-			if [ -f Makefile.${BUILD_TYPE} ] ; then \
-				test -d O.${T_A} || \
-				mkdir O.${T_A}; \
-				test -f O.${T_A}/Makefile || \
-				ln -s ../Makefile.${BUILD_TYPE} O.${T_A}/Makefile \
-					> /dev/null 2> /dev/null; \
-				test -f O.${T_A}/Target.include || \
-					echo "T_A=${T_A}" > O.${T_A}/Target.include; \
-				test -f O.${T_A}/.DEPENDS || \
-					touch O.${T_A}/.DEPENDS; \
-				fi ; \
-			cd $$TMP;					\
-		done
-

README

@@ -1,7 +1,7 @@
 $Id$
 
 ----------------------------------------------------------------------------
-3.12 EPICS BASE Notes and Build Instructions.
+3.13 EPICS BASE Notes and Build Instructions.
 	- By Matthew Needes
 ----------------------------------------------------------------------------
 
@@ -13,7 +13,7 @@ Notes:
 
 2. You must use GNU make (which is now THE supported make utility) for
    the build, gnumake.  Set your path so that a recent version (e.g.
-   V3.70) of gnumake is available (as make) before any system supplied makes.
+   V3.70) of gnumake is available.
 
 ----------------------------------------------------------------------------
    Part 1 - Configuring and Building EPICS Base
@@ -27,9 +27,9 @@ Notes:
 
 1.2  To add a target architecture to EPICS:
 
-   cd epics/config
-   cp CONFIG_ARCH.mv167 CONFIG_ARCH.YOUR_ARCH
-   edit CONFIG_ARCH.YOUR_ARCH   - For compiler flags / etc.
+   cd base/config
+   cp CONFIG.mv167 CONFIG.YOUR_ARCH
+   edit CONFIG.YOUR_ARCH   - For compiler flags / etc.
 
    cp CONFIG.Vx.68k CONFIG.Vx.YOUR_ARCH_CLASS
    cp CONFIG_SITE.Vx.68k CONFIG_SITE.Vx.YOUR_ARCH_CLASS
@@ -41,35 +41,51 @@ Notes:
 1.3  To build EPICS:
 
    cd epics/base
-   gnumake             - To build and install EPICS.
-   gnumake clean       - To clean temporary object files.  Clean will
-                       remove files from ALL O.ARCH dirs, not
-                       only those specified in BUILD_ARCHS.
+   gnumake             - To install include files, build and install EPICS.
+                         (Same as "gnumake inc install")
+   gnumake all         - Same as "gnumake"
+   gnumake clean       - To clean temporary object files.  Top level 
+                         clean will remove all the O.ARCH dirs, not
+                         only those specified in BUILD_ARCHS.
+   gnumake uninstall   - Only available at the top level directory.
+                         Cleans directories created by the install.
+   gnumake rebuild     - Same as "gnumake clean uninstall all"
 
-1.4  To create an EPICS release:
+1.4  "Partial" build commands:
 
-   edit base/include/version.h  - ONLY IF you need to change the EPICS
-                                  version number.
+     The complete set of targets now supported are: 
 
-   gnumake release          - Will create Tar file
+            action 
+            arch 
+            action.arch 
+            dir 
+            dir.action 
+            dir.arch 
+            dir.action.arch 
 
-   gnumake built_release    - Will create Tar file, after generating
-                              dependencies, INCLUDING BINARIES.
+      where: 
+            action can be clean, inc, install, depends, or build
+            action can also be uninstall or rebuild at top level only
+            dir is the name of a subdirectory. 
+            arch can be host, cross, sun4, solaris, mv167, ... 
 
-1.5  "Partial" build commands:
+    Examples are:
 
-   gnumake clean.sun4       - Cleans sun4 binaries in O.sun4 dirs only.
-   gnumake install.sun4     - Builds sun4 only.
-   gnumake install.mv167    - Builds mv167 only (a HOST_ARCH build must
-                              be complete before this can be issued).
+       gnumake inc              - To install include files
+       gnumake install.host     - To build and install EPICS for host arch.
+       gnumake install.cross    - To build and install EPICS for Vx archs.
+       gnumake clean.sun4       - Cleans sun4 binaries in O.sun4 dirs only.
+       gnumake install.sun4     - Builds sun4 only.
+       gnumake install.mv167    - Builds mv167 only (a HOST_ARCH build must
+                                  be complete before this can be issued).
 
 NOTES:
-   1. base/MakeRelease will create tar files in the directory ABOVE
-      base.  These tar files are then meant to be untarred at that level.
-      This release will include the "epics/config" directory.
 
-   2. EPICS binaries are kept in the bin/ARCH and lib/ARCH directories. 
-      EPICS shellscripts are kept in the tools directory.
+   1. EPICS binaries and shellscripts are installed into the directory
+      $(INSTALL_LOCATION)/bin/ARCH.
+
+   2. EPICS libraries are installed into the $(INSTALL_LOCATION)/lib/ARCH
+      directory.
 
    3. During a normal build (a "make" or "make install"), the "depends"
       dependency will NOT be invoked.  Only if "make depends" is run
@@ -88,7 +104,7 @@ NOTES:
       mv167 target.
 
 ----------------------------------------------------------------------------
-   Part 2  ---  Configuration Files in epics/config
+   Part 2  ---  Configuration Files in epics/base/config
 ----------------------------------------------------------------------------
 CONFIG - This file is meant to be included in the low-level EPICS Makefiles.
 It includes the other EPICS makefiles, and allows individual developers
@@ -99,13 +115,15 @@ CONFIG_SITE - This file is meant to be changed only by the EPICS system
 manager.  It specifies:
 
 	HOST_ARCH: The system's host architecture (sun4/hp700/etc).
-	BUILD_ARCHS: List of architectures to be built.
+               This now come from an environment variable.
+	CROSS_COMPILER_HOST_ARCHS: List of unix architectures with cross_compilers. 
+	CROSS_COMPILER_TARGET_ARCHS: List of architectures to build epics for.
 	VX_DIR: Location of vxWorks.
 	STATIC_BUILD: Whether or not to build clients statically.
 	etc.
 
 ----------------------------------------------------------------------------
-CONFIG_ARCH.ARCH - This file defines a particular architecture.  It
+CONFIG.ARCH - This file defines a particular architecture.  It
 contains the following variables:
 
 	BUILD_TYPE: Unix / Vx
@@ -113,23 +131,21 @@ contains the following variables:
 	Architecture dependent build flags.  The flag names / contents
 		depend on your architecture class.
 ----------------------------------------------------------------------------
-CONFIG_SITE.BUILD_TYPE.ARCH_CLASS - Contains definitions of where to
-find things, like X11 / Motif, etc.
 ----------------------------------------------------------------------------
-CONFIG.BUILD_TYPE.ARCH_CLASS - Contains definitions pertaining to a
-particular architecture class.  This file's primary usefulness is to
-define compile and link flags.
+CONFIG_SITE.ARCH - Contains site specific definitions pertaining to a
+particular architecture.  This file's primary usefulness is to
+define site specific compile and link flags.
 ----------------------------------------------------------------------------
 CONFIG_COMMON - Contains definitions describing the layout of base.
 ----------------------------------------------------------------------------
-CONFIG_BASE
-CONFIG_EXTENSIONS - Defines what subdirectories get built by default under
-base and extensions.
+CONFIG_BASE -  Defines what subdirectories get built by default under base.
 ----------------------------------------------------------------------------
 RULES.Vx - Rules for building with VxWorks makefiles.
 ----------------------------------------------------------------------------
 RULES.Unix - Rules for building with Unix makefiles.
 ----------------------------------------------------------------------------
+RULES_TOP - Top level rules for building.
+----------------------------------------------------------------------------
 RULES_ARCHS
 RULES_DIRS - Allows top-level type command syntax in low-level directories.
 ----------------------------------------------------------------------------
@@ -141,18 +157,18 @@ Filename                  SYS_MGR  ADD_VX_ARCH  ADD_UNIX_ARCH  DEVELOPER
 
 CONFIG                       m         -             -             m
 CONFIG_SITE                  m         m             m             -
-CONFIG_ARCH.ARCH             -         c             c             -
-CONFIG_SITE.Unix.ARCH_CLASS  m         -             c*            -
-CONFIG_SITE.Vx.ARCH_CLASS    m         c*            -             -
-CONFIG.Unix.ARCH_CLASS       -         -             c*            -
+CONFIG_SITE_ENV              m         -             -             -
+CONFIG.ARCH                  -         c             c             -
+CONFIG_SITE.ARCH             -         c             c             -
 CONFIG.Vx.ARCH_CLASS         -         c*            -             -
 RULES.Vx                     -         -             -             -
 RULES.Unix                   -         -             -             -
 CONFIG_BASE                  -         -             -             -
-CONFIG_EXTENSIONS            -         -             -             -
 CONFIG_COMMON                -         -             -             -
+CONFIG_ENV                   -         -             -             -
 RULES_ARCHS                  -         -             -             -
 RULES_DIRS                   -         -             -             -
+RULES_TOP                    -         -             -             -
 
      m -  Modify an existing file.
      c -  Create a new file.
@@ -170,63 +186,57 @@ RULES_DIRS                   -         -             -             -
             (files are numbered in the order of their inclusion)
 
  src/db/Makefile.Vx     (An example EPICS makefile)
- ^  ^   ^
- |  |   +--- 3.  RULES.Vx
- |  |              Default rules.
- |  +------- 2.  CONFIG
- |              ^ ^ ^ ^ ^
- |              | | | | |
- |              | | | | +- 1. CONFIG_SITE
- |              | | | |             HOST_ARCH = sun4
- |              | | | |             BUILD_ARCHS = $(HOST_ARCH) mv167 hkv2f
- |              | | | |             VX_DIR = /vxworks
- |              | | | |             More.
- |              | | | +--- 2. CONFIG_COMMON
- |              | | |               General info about base.
- |              | | +----- 3. CONFIG_ARCH.hkv2f
- |              | |                 BUILD_TYPE = Vx
- |              | |                 ARCH_CLASS = 68k 
- |              | |                 Arch Specific Compiler Flag Setup
- |              | +------- 4. CONFIG_SITE.Vx.68k
- |              |                   Directory locations
- |              +--------- 5. CONFIG.Vx.68k
- |                                  Compiler/utility setup for ARCH_CLASS
- +---------- 1.  Target.include
-                   T_A definition (target architecture)
+    ^   ^
+    |   +--- 3.  RULES.Vx
+    |              Default rules.
+    +------- 2.  CONFIG
+                  ^ ^ ^ ^
+                  | | | |
+                  | | | +- 1. CONFIG_SITE
+                  | | |             HOST_ARCH = sun4
+                  | | |             BUILD_ARCHS = $(HOST_ARCH) mv167 hkv2f
+                  | | |             VX_DIR = /vxworks
+                  | | |             More.
+                  | | +--- 2. CONFIG_COMMON
+                  | |               General info about base.
+                  | +----- 3. CONFIG.hkv2f
+                  |           ^     BUILD_TYPE = Vx
+                  |           |     ARCH_CLASS = 68k 
+                  |           |     Arch Specific Compiler Flag Setup
+                  |           +---  a. CONFIG.Vx.68k
+                  |                         Compiler/utility setup for ARCH_CLASS
+                  +------- 4. CONFIG_SITE.hkv2f
+                                    Site Specific setup 
 
 ----------------------------  sun4  example --------------------------------
             (files are numbered in the order of their inclusion)
 
  src/db/Makefile.Unix   (An example EPICS makefile)
- ^  ^   ^
- |  |   +--- 3.  RULES.Unix
- |  |              Default rules.
- |  +------- 2.  CONFIG
- |              ^ ^ ^ ^ ^
- |              | | | | |
- |              | | | | +- 1. CONFIG_SITE
- |              | | | |             HOST_ARCH = sun4
- |              | | | |             BUILD_ARCHS = $(HOST_ARCH) mv167 hkv2f
- |              | | | |             VX_DIR = /vxworks
- |              | | | |             More.
- |              | | | +--- 2. CONFIG_COMMON
- |              | | |               General info about base.
- |              | | +----- 3. CONFIG_ARCH.sun4
- |              | |                 BUILD_TYPE = Unix
- |              | |                 ARCH_CLASS = sun4 
- |              | |                 Arch Specific Compiler Flag Setup
- |              | +------- 4. CONFIG_SITE.Unix.sun4
- |              |                   Directory locations
- |              +--------- 5. CONFIG.Unix.sun4
- |                                  Compiler/utility setup for ARCH_CLASS
- +---------- 1.  Target.include
-                   T_A definition (target architecture)
+    ^   ^
+    |   +--- 3.  RULES.Unix
+    |              Default rules.
+    +------- 2.  CONFIG
+                  ^ ^ ^ ^
+                  | | | |
+                  | | | +- 1. CONFIG_SITE
+                  | | |             HOST_ARCH = sun4
+                  | | |             BUILD_ARCHS = $(HOST_ARCH) mv167 hkv2f
+                  | | |             VX_DIR = /vxworks
+                  | | |             More.
+                  | | +--- 2. CONFIG_COMMON
+                  | |               General info about base.
+                  | +----- 3. CONFIG.sun4
+                  |                 BUILD_TYPE = Unix
+                  |                 ARCH_CLASS = sun4 
+                  |                 Arch Specific Compiler Flag Setup
+                  +------- 4. CONFIG_SITE.sun4
+                                    Directory locations
 
 ----------------------------------------------------------------------------
-   Part 4  ---  EPICS dependencies
+   Part 4  ---  EPICS makefile rules
 ----------------------------------------------------------------------------
 
- Dependencies supported by lower level Makefiles:
+ Rules supported by lower level Makefiles:
 
     depends		- Generate include dependencies
     build		- Builds objects, using libraries from "build_libs"

README.Linux

@@ -1,27 +1,10 @@
                      Special Notes on Linux
-1) The epics makefiles use GNU make which is the make that comes
-   with Linux.  You need to make a link from make to gnumake and
-   have it in your path.  After you have defined the EPICS environement
-   variable, you can use:
 
-   ln -s /usr/bin/make $EPICS/base/tools/gnumake
+At this point, support for Linux only involves channel access
+clients.  Since Vxworks is not available for Linux, you must
+use other platforms for developing server side code.
 
-2) At this point, support for Linux only involves channel access
-   clients.  Since Vxworks is not available for Linux, you must
-   use other platforms for developing server side code.  As for
-   building databases with dct and gdct, this requires that the 
-   $EPICS/base/tools/makesdr script works properly. Since makesdr
-   is slated to be removed from the EPICS distribution in a future
-   release, we didn't feel it was important to include this capability
-   now.  Consequently, when you run make you will receive the error
-
-   gnumake[4]: *** [bldDefaultSdr] Error 127
-
-   and
-
-   gnumake[3]: *** [comsubs.o] Error 1
-
-3) You MUST start caRepeater by hand before running a client.  
+You MUST start caRepeater by hand before running a client.  
 Prior to running a client, you must run:
 
 caRepeater &

README.Perl

@@ -0,0 +1,44 @@
+Perl
+====
+
+A number of shell scripts are now Perl scripts,
+most important:
+
+tools/installEpics.pl
+include/makeEpicsVersion.pl
+libCom/bldEnvData.pl
+libCom/makeStatSymTbl.pl
+sequencer/makeVersion.pl
+
+WIN32 also uses
+tools/cp.pl, mv.pl, rm.pl, mkdir.pl
+which should behave like the UNIX cp, mv, rm, rmdir.
+All systems could use the Perl versions but that seems
+to be overkill for UNIX.
+
+Advantages:
+* no need for ls, date, basename, grep, awk, sed, ...,
+  which made the make UNIX-specific.
+* Perl is currently available for Unix, OS/2, WIN32, VMS
+  and the scripts should work on all those systems
+
+Disadvantage:
+* You have to get Perl, look e.g. at http://www.perl.com
+* Perl version 5.003_02 works, we don't know about earlier versions.
+
+
+Compile Perl:
+No big deal,
+* on UNIX say 'configure' and 'gnumake',
+* on Windows use MX Visual C++,
+  use File/Open Workspace to open the Makefile {PERL}/perl5i.mak,
+  use Build/Batch build to select eiher the Release or Debug targets.
+
+  You can do the same with the Makefile {Perl}/Ext/WIN32/win32.mak
+  - nice tools but not necessary for EPICS.
+
+  Then call {PERL}/bin/perlw32-install.bat
+
+In any case, read the texts that come with perl!
+
+

README.WIN32

@@ -0,0 +1,161 @@
+Compiling EPICS on WIN32 (Windows95/NT)
+---------------------------------------
+
+	-kuk- 11/18/96	questions & comments please
+			mailto:kasemir@atdiv.lanl.gov
+
+0) what you will get
+--------------------
+
+Right now this port of EPICS to WIN32 should allow you to
+
+* compile almost all EPICS base using Tornado, MS Visual C
+  and some additional tools: gnumake, a UNIX-like shell, awk, sed, ...
+  (See below where to get these.)
+* load EPICS on a PC IOC (486, pentium),
+  load simple databases
+  (no drivers/devices for real I/O available, yet.
+   Some Greenspring IP support [Relay, Dig, ADC, DAC] is in progress)
+* build and use ca.dll on NT or Win95 to access all IOCs,
+  as well as the Com-library as a DLL.
+  The remaining libraries are statically linked and
+  therefore only accessible from programming languages like C,
+  not general WIN32 apps.
+* build gdd, cas and a demo of the new portable CA server on WIN32.
+* missing: the sequencer, makeExampleApp etc.  and long term tests
+
+1) see what you have
+--------------------
+
+To compiler EPICS on WIN32, we need
+
+	WindRiver Systems Tornado (used: 1.0)
+	Microsoft Visual C       (used: 4.0)
+
+and some tools:
+
+	a Unix-like shell
+	gnumake
+	basename
+	date
+	mv
+	touch
+	sort
+
+All the above except. the shell are available 'on the net'
+as sources which compile with MS Visual C++.
+If you cannot/don't want to find them, contact me, please!
+
+I could not find a shell that's fully operational.
+The best one seems to be the Cygnus bash for WIN32, though it
+still has errors and doesn't come with sources that compile
+under MS VC++.
+I use a small self-written shell called knts,
+again: Contact me if you need it.
+
+* The final solution to make the shell, basename, date, ...
+* obsolete:
+* Use 
+* 1) no shell scripts
+* 2) Perl which is available for Unix and WIN32
+
+In addition we need some binaries that I have no sources
+for, yet, but that come with Tornado if and only if you
+INSTALL THE FULL PACKAGE (!)
+Including the 'WTX Test Suite i386/i486'
+(under "Select Sub-components" when installing Tornado)
+
+You should find in your <Tornado>/host/x86-win32/bin dir:
+
+	awk, cat, cp, rm, mkdir
+
+(There is also a bash and a GNU-make which are really poor,
+ and WindRiver told me that they do not consider to support
+ those in the future, so I no longer use them.)
+
+2) set environment variables
+----------------------------
+
+Your path should include:
+- The EPICS-binaries that we are about to build in base/bin/WIN32
+- The NTtools that you've built in step 1
+- The System (for me it's in NT40...)
+- The MS Visual C compiler binaries
+- The Tornado binaries
+
+Check with e.g.:
+
+/users/kay/Src/epics/nttools >echo $Path
+c:\users\kay\src\epics\base\bin\WIN32;c:\users\kay\src\epics\NTtools\bin;C:\NT40
+\system32;C:\NT40;c:\msdev\bin;C:\users\Tornado\host\x86-win32\bin
+
+On NT, $Path is defined by the operatin system, on Win95, it's $PATH instead.
+knts tries to use PATH and falls back on Path,
+what should wok on both systems.
+
+MS Visual C and Tornado should be installed properly with
+these env. variables set:
+
+WIND_BASE=c:\usersTornado
+WIND_HOST_TYPE=x86-win32
+
+This way the EPICS makesystem can locate Tornado 
+without any changes to the files in base/config.
+So for pc486 the settings in CONFIG_SITE where
+you specify the location of VxWorks are ignored,
+this information is taken from WIND_BASE and _HOST_TYPE!!
+
+MSDevDir=C:\MSDEV
+include=c:\msdev\include;c:\msdev\mfc\include
+lib=c:\msdev\lib;c:\msdev\mfc\lib
+
+(Setting env. vars. is different: for NT, use Settings/System,
+for Win95 use autoexec.bat)
+
+For EPICS, set:
+
+#	select host arch to build:
+HOST_ARCH=WIN32
+
+EPICS_CA_ADDR_LIST              128.165.32.255	(addr of WIN32 host)
+EPICS_CA_AUTO_CA_ADDR_LIST	NO
+EPICS_CA_CONN_TMO		30.0
+EPICS_CA_BEACON_PERIOD		15.0
+EPICS_CA_REPEATER_PORT		5065
+EPICS_CA_SERVER_PORT		5064
+EPICS_TS_MIN_WEST		420		(Germany: -120)
+
+
+To debug knts, set KNTS to 5:
+KNTS=5
+export KNTS
+
+You should do this, however, only if you really want the debugging info.
+
+
+3) building EPICS
+-----------------
+
+Prepare apx. 2 ltr. Tee and type:
+
+	cd <epics>/base
+	gnumake
+
+Watch for errors and send them to me.
+
+There might be loads of compiler warnings.
+Known errors:
+* gnumake seems to be faster than WIN32 sometimes
+  which results in warnings/errors like
+  "file has modification date in the future"
+  for newly vreated things.
+  Very seldom this is fatal, so you have to
+  stop gnumake and restart it.
+* This is strange because Windows95/NT don't care
+  about upper/lower case:
+  WIN32 is WIN32, not win32. Gnumake fails
+  if e.g. base/src/include/os/WIN32 is ...win32.
+
+Good luck !
+
+-Kay

README.cxxTemplates

@@ -0,0 +1,43 @@
+
+The templates supplied with EPICS base are in $(EPICS)/base/src/cxxTemplates
+
+In Stroustrups's "The C++ Programming Language" Appendix A: r.14.9
+(ANSI/ISO resolutions) a mechanism is described for the explicit 
+instantiation of template member functions (that are not inline). 
+At this time some compilers do not support this mechanism (and use
+a template database or smart linker instead). Other compilers 
+(such as g++) provide only limited support for other forms of
+instantiation.
+
+Since there is no defacto standard mechanism for instatiating
+templates at this time we are defining the preprocessor flag 
+EXPL_TEMPL in the build system when the compiler supports
+explicit instantiation. 
+
+EPICS codes that use templates may need to include a code block
+as follow that instantiates the template only once into each
+program.
+
+#include <classXYZ.h>
+#include <templXXX.h>
+#include <templXXX.cc>
+
+//
+// if the compiler supports explicit instantiation of
+// template member functions
+//
+#if defined(EXPL_TEMPL)
+        //
+        // From Stroustrups's "The C++ Programming Language"
+        // Appendix A: r.14.9
+        //
+        // This explicitly instantiates the template class's member
+        // functions into "templInst.o"
+        //
+        template class templXXX <classXYZ>;
+#endif
+
+Jeff Hill 3-6-97
+johill@lanl.gov
+
+

README.hp700_alpha

@@ -10,5 +10,3 @@
 
  might be necessary.
 
-- epics/base/tools/bsdinstall was written to replace install for hp.
-

README.niCpu030

@@ -0,0 +1,34 @@
+
+The CPU030 may need to have the nivxi path set correctly:
+	From the vxWorks shell type "vxitedit" (you may need to
+	loading the NI vxitedit package first)
+	take option 2
+	take option 3
+	type list
+	type modify 0
+		type in the correct path when promped
+		(the path should end in nivxi 
+		and should traverse the niCpu030
+		directories shipped with the 030
+		ie something of the form "???/config/niCPU030/nivxi"
+	type save
+	type exit
+	.
+	.
+	.
+
+	see "Getting Started with Your VXIcpu-030" from NI
+
+You may may need to setup front panel to backplane trigger
+routing:
+
+To take a TTL input and map it to VXI backplane ECL trigger 0
+type in (to the vxWorks shell):
+
+epvxiRouteTriggerECL(<logical address>, 1, 0)
+
+where <logical address> specifies the card with the 
+front panel trigger connection.
+
+johill@lanl.gov
+

README.solaris

@@ -1,6 +1,9 @@
 ----------------------------------------------------------------------------
-EPICS R3.12.2 Notes for Solaris
+EPICS Notes for Solaris
 	- By Andrew Johnson
+
+updated 12-16-96 by Jeff Hill
+
 ----------------------------------------------------------------------------
 
 Notes:
@@ -8,12 +11,13 @@ Notes:
 1. In order to build EPICS under Solaris 2, you must ensure that the
 solaris directory /usr/ccs/bin is in your search path.
 
-2. It is not possible to compile EPICS under Solaris 2 using only the
-GNU gcc compiler -- you must have the Sun SPARCworks ANSI C compiler.
+2. It is now possible to compile EPICS under Solaris 2 using either the
+GNU gcc compiler or the Sun SPARCworks ANSI C compiler. The g++/
+Sun SPARCworks ANSI C compiler combination has compiled and linked
+without errors but has not been extensively tested.
 
-3. EPICS under Solaris 2 no longer uses the UCB compatability
-libraries.  It does require the /usr/ucb/install program however.  In
-order to ensure that the /usr/ucblib files are not inherited, you
+3. EPICS under Solaris 2 no longer uses the UCB compatability libraries.
+In order to ensure that the /usr/ucblib files are not inherited, you
 should ensure that your LD_LIBRARY_PATH environment variable does not
 include /usr/ucblib when you build any of the host tools.
 

SkeletonCOPYRIGHT_Combined

@@ -0,0 +1,11 @@
+/*****************************************************************
+                          COPYRIGHT NOTIFICATION
+*****************************************************************
+
+(C)  COPYRIGHT 1991 Regents of the University of California,
+and the University of Chicago Board of Governors.
+
+This software was developed under a United States Government license
+described on the COPYRIGHT_Combined file included as part
+of this distribution.
+**********************************************************************/

config/CONFIG

@@ -0,0 +1,46 @@
+#
+#  $Id$
+#
+#  The developer may edit this file.
+
+#  EPICS base definitions
+#
+include $(EPICS_BASE)/config/CONFIG_COMMON
+ 
+#  Site-specific build options
+#
+include $(EPICS_BASE)/config/CONFIG_SITE
+ 
+# assume T_A is the host arch if not specified
+ifndef T_A
+T_A = $(HOST_ARCH)
+endif
+
+#  Architecture specific definitions
+#
+include $(EPICS_BASE)/config/CONFIG.$(T_A)
+#
+-include $(EPICS_BASE)/config/CONFIG_SITE.$(T_A)
+ 
+#  User specific definitions
+#
+-include $(HOME)/EPICS_CONFIG
+-include $(HOME)/EPICS_CONFIG.$(HOST_ARCH)
+
+#  All EPICS options other than BUILD_TYPE
+#   may be overridden here.
+#
+# EXAMPLES
+# --------
+#  Build client objects statically ?  must be either YES or NO
+#STATIC_BUILD=NO
+#  Unix Optimization,   must be either YES or NO
+#UNIX_OPT=YES
+#  VxWorks Optimization,  must be either YES or NO
+#VX_OPT=YES
+#  Generate Verbose Compiler Warnings for Unix,  must be either YES or NO
+#UNIX_WARN=YES
+#  Generate Verbose Compiler Warnings for VxWorks,  must be either YES or NO
+#VX_WARN=YES
+#etc.
+#

config/CONFIG.Linux

@@ -0,0 +1,131 @@
+#
+# $Id$
+#
+#  This file is maintained by the EPICS community.
+
+# Compiler and utility invocation (supply path to compiler here)
+#   (with warning flags built in)
+#  Paths to compilers
+
+# BUILD_TYPE
+#   Currently either Vx or Unix
+BUILD_TYPE = Unix
+ 
+GCC = gcc
+ACC = acc
+SUNCC = cc
+AR = ar 
+ARFLAGS = r
+ARCMD = $(AR) $(ARFLAGS)
+RANLIB = ranlib
+RANLIBFLAGS = -t
+YACC = $(EYACC)
+LEX = $(ELEX)
+G++ = g++
+CCC = CC
+MV = mv
+RMDIR = rm -rf
+MKDIR = mkdir
+CHMOD = "/bin/chmod"
+WHAT = what
+
+ACC_ANSI_INVOKE_W_NO = $(ACC) -Xa -w
+ACC_ANSI_INVOKE_W_YES = $(ACC) -Xa
+ACC_TRAD_INVOKE_W_NO = $(ACC) -Xs -w
+ACC_TRAD_INVOKE_W_YES = $(ACC) -Xs
+ACC_STRICT_INVOKE_W_NO = $(ACC) -Xc -w
+ACC_STRICT_INVOKE_W_YES = $(ACC) -Xc
+SUNCC_TRAD_INVOKE_W_NO = $(SUNCC) -w
+SUNCC_TRAD_INVOKE_W_YES = $(SUNCC)
+GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
+GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
+GCC_STRICT_INVOKE_W_NO = $(GCC) -ansi -pedantic
+GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
+GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
+GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
+ 
+C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
+C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
+C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
+CC = $(C_$(CMPLR))
+
+CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
+CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w 
+CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w 
+CCC_LD_FLAGS = 
+CCC_LD_LIBS = 
+CCC_TEMPL_INST_FLAG =
+G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
+G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall 
+G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
+      -Wmissing-prototypes -Woverloaded-virtual \
+      -Wwrite-strings -Wconversion -Wstrict-prototypes\
+      -Wpointer-arith -Winline
+G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
+
+CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
+CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
+TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
+
+# GNU make likes CXX instead of CCC
+CXX = $(CXX_$(CXXCMPLR))
+
+# Static Build options
+ACC_SFLAGS_YES= -Bstatic
+ACC_SFLAGS_NO=
+CC_SFLAGS_YES= -Bstatic
+CC_SFLAGS_NO=
+GCC_SFLAGS_YES= -static
+GCC_SFLAGS_NO=
+
+SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
+SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
+SF_STRICT = $(SF_ANSI)
+UNIX_SFLAGS = $(SF_$(CMPLR))
+ 
+# Optimization
+OPTIM_YES = -O
+OPTIM_NO =
+UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
+
+# Include files
+UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
+                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
+ 
+# Operating system flags
+OP_SYS_FLAGS = -DUNIX 
+ 
+UNIX_LDFLAGS = -L$(EPICS_BASE_LIB)
+UNIX_LDLIBS = -lm 
+ 
+ARCH_DEP_CFLAGS = -D_X86_ -Dlinux
+ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
+
+UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
+ 
+UNIX_CXXFLAGS = $(UNIX_CFLAGS)
+ 
+# Target specific flags
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
+TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+TARGET_LDLIBS = $($(basename $@)_LDLIBS)
+TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
+
+CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
+CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) \
+	$(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
+
+LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
+LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
+ 
+# Override SUN defaults
+COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
+COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
+LINK.c = $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
+LINK.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
+
+DEPENDS_RULE.c = -$(COMPILE.c) -M $(SRCS.c) > .DEPENDS
+DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.Linux

config/CONFIG.Vx.68k

@@ -0,0 +1,121 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+AR = $(VX_GNU_BIN)/ar68k
+RANLIB = $(VX_GNU_BIN)/ranlib68k
+YACC = $(EYACC)
+LEX = $(ELEX)
+CC = $(VX_GNU_BIN)/cc68k -B$(VX_GNU_LIB)/gcc-lib/ -nostdinc
+CPP = $(VX_GNU_BIN)/cpp68k -nostdinc
+#CPP = $(CC) -E
+GCC = $(CC)
+LD = $(VX_GNU_BIN)/ld68k -r
+EPICS_LDLIBS =
+MV=mv
+RM=rm -f
+MKDIR = mkdir
+RMDIR=rm -rf
+WHAT = what
+
+#----------------------------
+# Only G++ currently supported
+CPLUSPLUS = G++
+CXXCMPLR = NORMAL
+VX_OPT = YES
+BOARD = $(subst mv,MV,$(T_A))
+CPU = 68000
+OS = VXWORKS
+#----------------------------
+
+CCC = $(VX_GNU_BIN)/cc68k -B$(VX_GNU_LIB)/gcc-lib/ -nostdinc
+AR_CCC = $(VX_GNU_BIN)/ar68k
+CPP_CCC = $(VX_GNU_BIN)/cpp68k -nostdinc
+RANLIB_CCC = $(VX_GNU_BIN)/ranlib68k
+LD_CCC = $(VX_GNU_BIN)/ld68k
+CCC_CCFLAGS =
+CCC_ARCH_DEP_CCFLAGS =
+CCC_ARCH_DEP_LDFLAGS =
+
+G++ = $(GNU_BIN)/sun3-g++ -B$(GNU_LIB)/gcc-lib/ -nostdinc -DEXPL_TEMPL
+AR_G++ = $(GNU_BIN)/sun3-ar
+CPP_G++ = $(GNU_BIN)/sun3-cpp
+RANLIB_G++ = $(GNU_BIN)/sun3-ranlib
+LD_G++ = $(GNU_BIN)/sun3-ld
+G++_ARCH_DEP_CCFLAGS = --no-builtin -Wa,"-m68040" -DOS_EQ_$(OS) \
+	-DBOARD_EQ_$(BOARD) -DCPU_EQ_$(CPU) -DBOARD=$(BOARD)
+G++_ARCH_DEP_LDFLAGS = -Ur -N -T$(EPICS_BASE_BIN)/vxldscript.MRI
+
+CCC_NORMAL = $(CCC)
+CCC_STRICT = $(CCC) -ansi -pedantic -Wtraditional \
+      -Wmissing-prototypes -Woverloaded-virtual \
+      -Wwrite-strings -Wconversion -Wstrict-prototypes\
+      -Wpointer-arith -Winline
+G++_NORMAL = $(G++) 
+G++_STRICT = $(G++) -ansi -pedantic -Wtraditional
+
+CXX = $($(CPLUSPLUS)_$(CXXCMPLR))
+AR_CXX = $(AR_$(CPLUSPLUS))
+CPP_CXX = $(CPP_$(CPLUSPLUS))
+RANLIB_CXX = $(RANLIB_$(CPLUSPLUS))
+LD_CXX = $(LD_$(CPLUSPLUS))
+
+ARCH_DEP_CXXFLAGS += $($(CPLUSPLUS)_ARCH_DEP_CCFLAGS) $(ARCH_DEP_CFLAGS)
+ARCH_DEP_CXXLDFLAGS =  $($(CPLUSPLUS)_ARCH_DEP_LDFLAGS) $(ARCH_DEP_LDFLAGS)
+
+
+# special c library requirements
+SPECIAL_LANG =
+
+# Compiler flags, don't mess with this
+#    Optimization flags
+VX_OPT_YES = -O
+VX_OPT_NO =
+VX_OPT_FLAGS = $(VX_OPT_$(VX_OPT))
+ 
+#    Include files
+VX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
+	-I$(EPICS_BASE_INCLUDE)/os/vxWorks -I$(VX_INCLUDE)
+
+#    Warnings
+#At some time we should turn on pedantic
+VX_WARN_YES = -Wall -pedantic -ansi
+#VX_WARN_YES = -Wall
+VX_WARN_NO =
+VX_WARN_FLAGS = $(VX_WARN_$(VX_WARN))
+ 
+#    Operating system flags
+VX_OP_SYS_FLAGS = -DvxWorks -DV5_vxWorks
+ 
+#    Arch dependent flags are set in CONFIG_ARCH.*
+VX_CFLAGS = $(VX_OPT_FLAGS) $(VX_WARN_FLAGS) \
+        $(VX_INCLUDES) $(VX_OP_SYS_FLAGS)
+VX_CXXFLAGS += $(VX_CFLAGS)
+ 
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
+TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
+
+CFLAGS = $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(VX_CFLAGS)
+CXXFLAGS = $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(VX_CXXFLAGS)
+LDFLAGS =    $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(VX_LDFLAGS)
+LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(VX_LDLIBS)
+CXXLDLIBS = $(TARGET_LDLIBS) $(USR_CXXLDLIBS) $(ARCH_DEP_LDLIBS) $(VX_LDLIBS)
+CXXLDFLAGS = $(TARGET_LDFLAGS) $(USR_CXXLDFLAGS) $(ARCH_DEP_CXXLDFLAGS) $(VX_LDFLAGS)
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
+# Build compile line here
+COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
+LINK.c = $(LD) $(LDFLAGS) -o
+COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
+LINK.cc = $(LD_CXX) $(CXXLDFLAGS) -o
+
+CPPSNCFLAGS = $(VX_INCLUDES)
+
+DEPENDS_RULE.c = -$(COMPILE.c) -M $(SRCS.c) >> .DEPENDS
+DEPENDS_RULE.cc = -$(COMPILE.cc) -M $(SRCS.cc) >> .DEPENDS 
+
+# Allow site host architecture specific overrides
+-include $(EPICS_BASE)/config/CONFIG_SITE.$(BUILD_TYPE).$(ARCH_CLASS).$(HOST_ARCH)

config/CONFIG.Vx.pc486

@@ -0,0 +1,92 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# OLDINSTALL def used only for releases prior to R3.12.2.2
+# Unix Compiler and other Utilities
+OLDINSTALL = echo CONFIG.Vx.486 OLDINSTALL
+
+CP   =$(PERL) $(EPICS_BASE)/src/tools/cp.pl
+MV   =$(PERL) $(EPICS_BASE)/src/tools/mv.pl
+RM   =$(PERL) $(EPICS_BASE)/src/tools/rm.pl -f
+MKDIR=$(PERL) $(EPICS_BASE)/src/tools/mkdir.pl
+RMDIR=$(PERL) $(EPICS_BASE)/src/tools/rm.pl -rf
+CHMOD=echo
+
+#	overrides defines in CONFIG_SITE that don't fit Tornado
+#
+#	We are lucky because
+#	this should not really be site specific
+#
+#	(if Tornado is installed correctly
+#	   -> WIND_BASE, WIND_HOST_TYPE set  )
+#
+#	At first we hack a little bit on WIND_BASE 
+#	to convert the DOS style into a Unix style path:
+#
+#	If C: was in WIND_BASE, it's converted into c: (lowercase),
+#	then c: is removed and all '\' are converted into '/'.
+SANE_WIND_BASE := $(subst \,/,$(subst c:,,$(subst C:,c:,$(WIND_BASE))))
+VX_DIR         := $(SANE_WIND_BASE)/target
+VX_GNU         := $(SANE_WIND_BASE)/host/$(WIND_HOST_TYPE)
+VX_GNU_BIN     := $(VX_GNU)/bin
+VX_GNU_LIB     := $(VX_GNU)/lib
+VX_IMAGE        = $(VX_CONFIG_DIR)/$(T_A)/vxWorks
+VX_IMAGE_SYM    = $(VX_CONFIG_DIR)/$(T_A)/vxWorks.sym
+
+
+AR = $(VX_GNU_BIN)/ar386
+RANLIB = $(VX_GNU_BIN)/ranlib386
+YACC = $(EYACC)
+LEX = $(ELEX)
+CC = $(VX_GNU_BIN)/cc386 -B$(VX_GNU_LIB)/gcc-lib/ -nostdinc -fno-builtin -fno-defer-pop
+CPP = $(VX_GNU_BIN)/cpp386 -nostdinc
+#CPP = $(CC) -E
+GCC = $(CC)
+LD = $(VX_GNU_BIN)/ld386 -r
+EPICS_LDLIBS =
+
+# special c library requirements
+SPECIAL_LANG =
+
+# Compiler flags, don't mess with this
+#    Optimization flags
+VX_OPT_YES = -O
+VX_OPT_NO = -O0
+VX_OPT_FLAGS = $(VX_OPT_$(VX_OPT))
+ 
+#    Include files
+VX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE)	\
+	 -I$(EPICS_BASE_INCLUDE)/os/vxWorks -I$(VX_INCLUDE)
+
+#    Warnings
+#At some time we should turn on pedantic
+#VX_WARN_YES = -Wall -pedantic
+VX_WARN_YES = -W
+VX_WARN_NO =
+VX_WARN_FLAGS = $(VX_WARN_$(VX_WARN))
+ 
+#    Operating system flags
+VX_OP_SYS_FLAGS = -DvxWorks -DV5_vxWorks
+ 
+#    Arch dependent flags are set in CONFIG_ARCH.*
+VX_CFLAGS = $(VX_OPT_FLAGS) $(VX_WARN_FLAGS) \
+        $(VX_INCLUDES) $(VX_OP_SYS_FLAGS)
+ 
+VX_LDFLAGS = -o
+ 
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+
+CFLAGS = $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(VX_CFLAGS)
+LDFLAGS = $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(VX_LDFLAGS)
+ 
+# Build compile line here
+COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
+COMPILE.cc = $(CC) -x 'c++' -DEXPL_TEMPL $(CFLAGS) $(CPPFLAGS)  -c
+LINK.c = $(LD) $(LDFLAGS)
+
+CPPSNCFLAGS = $(USR_INCLUDES) $(VX_INCLUDES)
+
+DEPENDS_RULE.c = -$(COMPILE.c) -M $(SRCS.c) >> .DEPENDS
+DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.68k

config/CONFIG.WIN32

@@ -0,0 +1,131 @@
+#	CONFIG.WIN32  -kuk-
+#
+#	The current make-system for WIN32
+#	needs
+#	* gnumake (OK, sources for WIN32 are available)
+#	* Perl    (e.g. from www.perl.com )
+#	* a UNIX-like shell (ouch!)
+#
+#	I found no fully operational shell and no sources for WIN32 so far,
+#	Cygnus' bash e.g. cannot handle this:
+#	(echo a>a; echo b>>a)
+#	Right now I use the knts that I wrote and simplified scripts.
+#	Jeff eliminated many shell-lines in Makefile.*.
+#
+
+
+# 	Use std path variables from ms
+HOME = $(HOMEDRIVE)$(HOMEPATH)
+
+# BUILD_TYPE
+#   Currently either Vx or Host (latter used to be Unix
+BUILD_TYPE=Host
+
+#
+# optimize/debug flags
+#
+HOST_OPT = YES
+CXX_OPT_FLAGS_YES = -Ox
+#	-Zi  : included debugging info
+CXX_OPT_FLAGS_NO = -Zi
+CXX_OPT_FLAGS = $(CXX_OPT_FLAGS_$(HOST_OPT))
+LINK_OPT_FLAGS_YES = 
+LINK_OPT_FLAGS_NO = -debug
+LINK_OPT_FLAGS = $(LINK_OPT_FLAGS_$(HOST_OPT))
+
+#	to identify the general architecture class:
+#	should be BSD, SYSV, WIN32, ...
+#	is: WIN32, sun4, hpux, linux, ...
+#
+ARCH_CLASS=WIN32
+
+#	ifdef WIN32   looks better that  ifeq ($(ARCH_CLASS),WIN32)  ??
+WIN32=1
+
+# Compiler and utility invocation (supply path to compiler here)
+#   (with warning flags built in)
+#  Paths to compilers
+YACC  = $(EYACC)
+LEX   = $(ELEX)
+CC    = cl -nologo
+CP    = $(PERL) $(EPICS_BASE)/src/tools/cp.pl
+MV    = $(PERL) $(EPICS_BASE)/src/tools/mv.pl
+RM    = $(PERL) $(EPICS_BASE)/src/tools/rm.pl -f
+MKDIR = $(PERL) $(EPICS_BASE)/src/tools/mkdir.pl
+RMDIR = $(PERL) $(EPICS_BASE)/src/tools/rm.pl -rf
+EXE=.exe
+OBJ=.obj
+
+# Include files
+HOST_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) \
+	-I$(EPICS_BASE_INCLUDE)	-I$(EPICS_BASE_INCLUDE)/os/$(ARCH_CLASS)
+ 
+#	Operating system flags (from win32.mak)
+#
+#	__STDC__=0 is a real great idea of Jeff that gives us both:
+#	1) define STDC for EPICS code (pretend ANSI conformance)
+#	2) set it to 0 to use MS C "extensions" (open for _open etc.)
+#	   because MS uses:   if __STDC__ ... disable many nice things
+#
+#	-MDd : use MSVCRTD (run-time as DLL, multi-thread support)
+#	       this also calls for _DLL
+#
+OP_SYS_FLAGS:=-MDd $(CXX_OPT_FLAGS) -VMG -VMV -DWIN32 -D_WIN32 -D_DEBUG -D_WINDOWS \
+	-D_X86_ -D_NTSDK -D_DLL -D__STDC__=0
+
+
+HOST_LDLIBS:=user32.lib kernel32.lib wsock32.lib advapi32.lib winmm.lib
+HOST_LDFLAGS:=-nologo -libpath:$(EPICS_BASE_LIB)
+
+#	Files and flags needed to link DLLs (used in RULES.Host)
+#
+#	Strange but seems to work without: WIN32_DLLFLAGS should contain
+#	an entry point:
+#		'-entry:_DllMainCRTStartup$(DLLENTRY)'
+DLLENTRY:=@12
+
+#	yes, for MS it's I386 for 386, 486, Pentium!
+#	don't mix this with VxWorks which has different BSPs for [34]86 !
+WIN32_DLLFLAGS:=$(HOST_LDFLAGS) $(HOST_LDLIBS)\
+	-subsystem:windows -dll -incremental:no $(LINK_OPT_FLAGS) -machine:I386 
+
+
+ARCH_DEP_CFLAGS =
+ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
+HOST_CFLAGS = $(HOST_SFLAGS) $(HOST_INCLUDES) $(OP_SYS_FLAGS)
+ 
+HOST_CXXFLAGS = $(HOST_CFLAGS)
+ 
+# Target specific flags
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
+TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+TARGET_LDLIBS = $($(basename $@)_LDLIBS)
+TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
+
+CFLAGS = $(HOST_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(HOST_CFLAGS)
+CXXFLAGS = $(HOST_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(HOST_CXXFLAGS)
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
+
+CXX=cl -nologo
+
+LDFLAGS=$(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(HOST_LDFLAGS)
+LDLIBS=$(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(HOST_LDLIBS)
+ 
+# Override SUN defaults
+COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
+
+#	Problem: MS Visual C++ does not recognize  *.cc as C++ source,
+#	we have to compile xx.cc  using the flag -Tp xx.cc,
+#	i.e.  -Tp  has to be immediately before the source file name
+COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -DEXPL_TEMPL -c -Tp
+
+LINK.c=link $(LINK_OPT_FLAGS) $(LDFLAGS) -out:$@
+LINK.cc=$(LINK.c)
+
+#	The DEPENDS_RULE may be a script on other systems,
+#	if you need different rules for .c and .cc,
+#	that script has to figure out what to call.
+#
+DEPENDS_RULE = @echo no DEPENDS_RULE defined in CONFIG.WIN32

config/CONFIG.alpha

@@ -0,0 +1,143 @@
+# CONFIG.Unix.alpha
+#
+#  This file is maintained by the EPICS community.
+
+# BUILD_TYPE
+#   Currently either Vx or Host
+BUILD_TYPE = Host
+
+ARCH_CLASS = alpha
+
+# Compiler and utility invocation (supply path to compiler here)
+#   (with warning flags built in)
+#  Paths to compilers
+GCC = gcc
+ACC = cc
+
+AR = ar -rc
+_AR = $(AR) $(ARFLAGS)
+G++_AR = $(_AR)
+CCC_AR = $(AR)
+ARCMD = $($(CPLUSPLUS)_AR)
+
+RANLIB = ranlib
+YACC = $(EYACC)
+LEX = $(ELEX)
+G++ = g++
+CCC = cc
+
+CP=cp
+MV = mv
+RM=rm -f
+RMDIR = rm -rf
+MKDIR = mkdir
+CHMOD = "/bin/chmod"
+WHAT = what
+
+EXE=
+OBJ=.o
+
+
+ACC_ANSI_INVOKE_W_NO = $(ACC) -std -w
+ACC_ANSI_INVOKE_W_YES = $(ACC) -std
+ACC_STRICT_INVOKE_W_YES = $(ACC) -std1 -w
+ACC_STRICT_INVOKE_W_NO = $(ACC) -std1
+ACC_TRAD_INVOKE_W_NO = $(ACC) -std0 -w
+ACC_TRAD_INVOKE_W_YES = $(ACC) -std0
+GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
+GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
+GCC_STRICT_INVOKE_W_NO = $(GCC) -ansi -pedantic
+GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
+GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
+GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
+ 
+C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
+C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
+C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
+CC = $(C_$(CMPLR))
+
+CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
+CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w 
+CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w 
+CCC_LD_FLAGS =
+CCC_LD_LIBS = 
+CCC_TEMPL_INST_FLAG =
+G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
+G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall 
+G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
+      -Wmissing-prototypes -Woverloaded-virtual \
+      -Wwrite-strings -Wconversion -Wstrict-prototypes\
+      -Wpointer-arith -Winline
+G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
+
+CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
+CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
+TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
+
+# GNU make likes CXX instead of CCC
+CXX = $(CXX_$(CXXCMPLR))
+
+# Static Build options
+ACC_SFLAGS_YES= -non_shared
+ACC_SFLAGS_NO= -call_shared
+CC_SFLAGS_YES= -non_shared
+CC_SFLAGS_NO= -call_shared
+GCC_SFLAGS_YES= -static
+GCC_SFLAGS_NO=
+
+SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
+SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
+SF_STRICT = $(SF_ANSI)
+UNIX_SFLAGS = $(SF_$(CMPLR))
+ 
+# Optimization
+OPTIM_YES = -O
+OPTIM_NO =
+UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
+
+# Include files
+UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
+                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
+ 
+# Operating system flags
+OP_SYS_FLAGS = -DUNIX
+ 
+SPECIAL_LDFLAGS = 
+UNIX_LDFLAGS = -L$(EPICS_BASE_LIB)
+UNIX_LDLIBS = -lm
+ 
+# Architecture specific build flags
+ARCH_DEP_CFLAGS = -D_OSF_SOURCE
+ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
+ARCH_DEP_LDLIBS = -lnsl
+
+UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
+ 
+UNIX_CXXFLAGS = $(UNIX_CFLAGS)
+ 
+# Target specific flags
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
+TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+TARGET_LDLIBS = $($(basename $@)_LDLIBS)
+TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
+
+CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
+CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) \
+	$(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
+
+LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
+LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
+ 
+# Override defaults
+COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
+COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
+# Unlike the 'Unix' makesystem, output flags -o .. are now part of LINK.c[c]
+LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
+LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
+
+DEPEND_RULE.c = @echo no DEPENDS_RULE.c defined in CONFIG.alpha
+DEPEND_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.alpha
+

config/CONFIG.cygwin32

@@ -0,0 +1,138 @@
+#
+# $Id$
+#
+#  This file is maintained by the EPICS community.
+
+BUILD_TYPE = Host
+
+ARCH_CLASS = cygwin32
+
+GCC = gcc
+G++ = g++
+
+#==========================
+# Fix for cygwin32 beta17.1 includes
+CXX_INCLUDES = /usr/local/include/g++
+#==========================
+ 
+# Override values in CONFIG_SITE
+ANSI=GCC
+STANDARD=GCC
+CPLUSPLUS=G++
+ 
+EXE=.exe
+
+OBJ=.o
+
+AR = ar
+_AR = $(AR) $(ARFLAGS)
+G++_AR = $(_AR)
+ARCMD = $($(CPLUSPLUS)_AR)
+
+RANLIB = ranlib
+YACC = $(EYACC)
+LEX = $(ELEX)
+RMDIR = rm -rf
+MKDIR = mkdir
+CP=cp
+MV=mv
+RM=rm -f
+CHMOD = xxxx
+WHAT = echo
+
+GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
+GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
+GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
+GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
+GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
+GCC_LD_LIBS = 
+GCC_LD_FLAGS =
+
+C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
+C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
+C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
+CC = $(C_$(CMPLR))
+
+LD_LIBS_OLD = $($(STANDARD)_LD_LIBS)
+LD_LIBS_ANSI = $($(ANSI)_LD_LIBS)
+LD_LIBS_STRICT = $($(ANSI)_LD_LIBS)
+CCOMPILER_LDLIBS = $(LD_LIBS_$(CMPLR))
+LD_FLAGS_OLD = $($(STANDARD)_LD_FLAGS)
+LD_FLAGS_ANSI = $($(ANSI)_LD_FLAGS)
+LD_FLAGS_STRICT = $($(ANSI)_LD_FLAGS)
+CCOMPILER_LDFLAGS = $(LD_FLAGS_$(CMPLR))
+
+G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
+G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall
+G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
+      -Wmissing-prototypes -Woverloaded-virtual \
+      -Wwrite-strings -Wconversion -Wstrict-prototypes\
+      -Wpointer-arith -Winline
+
+CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
+CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
+ 
+# GNU make likes CXX
+CXX = $(CXX_$(CXXCMPLR))
+
+# Static Build options
+GCC_SFLAGS_YES= -static
+GCC_SFLAGS_NO=
+
+SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
+SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
+SF_STRICT = $(SF_ANSI)
+UNIX_SFLAGS = $(SF_$(CMPLR))
+ 
+SL_OLD = $($(STANDARD)_SLIBS_$(STATIC_BUILD))
+SL_ANSI = $($(ANSI)_SLIBS_$(STATIC_BUILD))
+SL_STRICT = $(SL_ANSI)
+UNIX_SLIBS = $(SL_$(CMPLR))
+ 
+# Optimization
+OPTIM_YES = -O
+OPTIM_NO =
+UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
+
+# Include files
+UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
+                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
+
+# Operating system flags
+OP_SYS_FLAGS = -DUNIX
+ 
+UNIX_LDFLAGS = -L$(EPICS_BASE_LIB) $(CCOMPILER_LDFLAGS)
+UNIX_LDLIBS = $(UNIX_SLIBS) -lm $(CCOMPILER_LDLIBS)
+ 
+# Architecture specific build flags
+ARCH_DEP_CFLAGS = -DCYGWIN32
+ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS) -I$(CXX_INCLUDES)
+#ARCH_DEP_LDLIBS = -lsocket -lnsl
+# -lsocket     needed by libca.a
+# -lnsl        needed by libca.a 
+ 
+UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
+ 
+UNIX_CXXFLAGS = $(UNIX_CFLAGS)
+ 
+# Target specific flags
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
+TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+TARGET_LDLIBS = $($(basename $@)_LDLIBS)
+TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
+
+CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
+CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS)
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
+
+LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
+LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
+ 
+LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
+LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
+
+#DEPENDS_RULE.c = -$(COMPILE.c) -xM $(SRCS.c) > .DEPENDS
+#DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.cygwin32
+DEPENDS_RULE = -$(COMPILE.c) -MM $(SRCS.c) $(SRCS.cc) > .DEPENDS

config/CONFIG.hkv2f

@@ -0,0 +1,17 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# BUILD_TYPE
+BUILD_TYPE = Vx
+
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = 68k
+
+include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
+ 
+# Architecture specific build flags
+ARCH_DEP_CFLAGS = -DCPU=MC68020 -m68020 -DCPU_FAMILY=MC680X0
+ 

config/CONFIG.hp700

@@ -0,0 +1,144 @@
+# CONFIG.Unix.hp700
+#
+#  This file is maintained by the EPICS community.
+
+# BUILD_TYPE
+#   Currently either Vx or Unix
+BUILD_TYPE = Unix
+
+ARCH_CLASS = hp700
+
+# Compiler and utility invocation (supply path to compiler here)
+#   (with warning flags built in)
+#  Paths to compilers
+GCC = gcc
+ACC = cc -Aa
+HPACC = cc -Aa
+HPCC = cc -Ac
+TRADCC = cc
+AR = ar 
+ARCMD = $(AR) $(ARFLAGS)
+
+RANLIB = ranlib
+YACC = $(EYACC)
+LEX = $(ELEX)
+G++ = g++
+CCC = CC
+
+CP=cp
+MV = mv
+RM=rm -f
+RMDIR = rm -rf
+MKDIR = mkdir
+CHMOD = "/bin/chmod"
+WHAT = what
+
+EXE=
+OBJ=.o
+
+ACC_ANSI_INVOKE_W_NO = $(ACC) -w
+ACC_ANSI_INVOKE_W_YES = $(ACC)
+ACC_TRAD_INVOKE_W_NO = $(TRADCC) -w
+ACC_TRAD_INVOKE_W_YES = $(TRADCC)
+ACC_STRICT_INVOKE_W_NO = $(ACC) -w
+ACC_STRICT_INVOKE_W_YES = $(ACC)
+HPACC_ANSI_INVOKE_W_NO = $(HPACC) -w 
+HPACC_ANSI_INVOKE_W_YES = $(HPACC)
+HPCC_TRAD_INVOKE_W_NO = $(HPCC) -w
+HPCC_TRAD_INVOKE_W_YES = $(HPCC)
+HPACC_STRICT_INVOKE_W_NO = $(HPACC) -w
+HPACC_STRICT_INVOKE_W_YES = $(HPACC)
+
+GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
+GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
+GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
+GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
+GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
+
+CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
+CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w 
+CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w 
+CCC_LD_FLAGS =
+CCC_LD_LIBS = 
+CCC_TEMPL_INST_FLAG =
+G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
+G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall 
+G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
+      -Wmissing-prototypes -Woverloaded-virtual \
+      -Wwrite-strings -Wconversion -Wstrict-prototypes\
+      -Wpointer-arith -Winline
+G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
+
+CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
+CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
+TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
+
+# GNU make likes CXX instead of CCC
+CXX = $(CXX_$(CXXCMPLR))
+
+C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
+C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
+C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
+CC = $(C_$(CMPLR))
+
+# Static Build options
+ACC_SFLAGS_YES= -Wl,-a,archive
+ACC_SFLAGS_NO=
+CC_SFLAGS_YES= -Wl,-a,archive
+CC_SFLAGS_NO=
+GCC_SFLAGS_YES= -static
+GCC_SFLAGS_NO=
+
+SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
+SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
+SF_STRICT = $(SF_ANSI)
+UNIX_SFLAGS = $(SF_$(CMPLR))
+ 
+# Optimization
+OPTIM_YES = -O
+OPTIM_NO =
+UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
+
+# Include files
+UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
+                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
+ 
+# Operating system flags
+OP_SYS_FLAGS = -DUNIX
+ 
+SPECIAL_LDFLAGS = 
+UNIX_LDFLAGS = -L$(EPICS_BASE_LIB)
+UNIX_LDLIBS = -lm
+ 
+ARCH_DEP_CFLAGS = -D_HPUX_SOURCE -DHP_UX
+ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
+
+UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
+UNIX_CXXFLAGS = $(UNIX_CFLAGS)
+ 
+# Target specific flags
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
+TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+TARGET_LDLIBS = $($(basename $@)_LDLIBS)
+TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
+
+CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
+CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) \
+	$(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
+
+ARFLAGS = rv
+
+LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
+LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
+ 
+# Override defaults
+COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
+COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
+LINK.c = $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
+LINK.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
+DEPENDS_RULE.c = @echo no DEPENDS_RULE.c defined in CONFIG.hp700
+DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.hp700
+

config/CONFIG.mv147

@@ -0,0 +1,16 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+BUILD_TYPE = Vx
+
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = 68k
+ 
+include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
+
+# Architecture specific build flags
+ARCH_DEP_CFLAGS = -DCPU=MC68030 -m68030 -DCPU_FAMILY=MC680X0
+ 

config/CONFIG.mv162

@@ -0,0 +1,17 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# BUILD_TYPE
+BUILD_TYPE = Vx
+
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = 68k
+
+include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
+ 
+# Architecture specific build flags
+ARCH_DEP_CFLAGS = -DCPU=MC68040 -m68040 -DCPU_FAMILY=MC680X0
+ 

config/CONFIG.mv162lc

@@ -0,0 +1,16 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+# BUILD_TYPE
+BUILD_TYPE = Vx
+
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = 68k
+
+include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
+ 
+# Architecture specific build flags
+ARCH_DEP_CFLAGS = -DCPU=MC68040 -msoft-float -DCPU_FAMILY=MC680X0

config/CONFIG.mv167

@@ -0,0 +1,16 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+BUILD_TYPE = Vx
+
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = 68k
+
+include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
+ 
+# Architecture specific build flags
+ARCH_DEP_CFLAGS = -DCPU=MC68040 -m68040 -DCPU_FAMILY=MC680X0
+ 

config/CONFIG.mv177

@@ -0,0 +1,16 @@
+
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+BUILD_TYPE = Vx
+
+# For Vx directories of form:
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+ARCH_CLASS = 68k
+
+include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
+ 
+# Architecture specific build flags
+ARCH_DEP_CFLAGS = -DCPU=MC68060 -m68040 -DCPU_FAMILY=MC680X0
+ 

config/CONFIG.niCpu030

@@ -0,0 +1,16 @@
+
+# BUILD_TYPE
+#   Currently either Vx or Unix
+BUILD_TYPE = Vx
+
+# For Vx directories of form:
+#
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+#
+ARCH_CLASS = 68k
+
+include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
+
+# Architecture specific build flags
+ARCH_DEP_CFLAGS = -DCPU=MC68030 -m68030 -DCPU_FAMILY=MC680X0
+ 

config/CONFIG.pc486

@@ -0,0 +1,26 @@
+
+# BUILD_TYPE
+#   Currently either Vx or Unix
+BUILD_TYPE = Vx
+
+# For Vx directories of form:
+#
+#   $(VX_DIR)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+#
+# And configuration files:
+#
+#   CONFIG_SITE.Vx.68k  -or-  CONFIG_SITE.Unix.sun4
+#
+ARCH_CLASS = pc486
+
+include $(EPICS_BASE)/config/CONFIG.$(BUILD_TYPE).$(ARCH_CLASS)
+
+# Architecture specific build flags
+# Defines:
+#	CPU, CPU_FAMILY is used by VxWorks header files,
+#	_X86_ is used in base/src/ca
+#
+#	-g is for debugging information, I didn't know where elso to put it
+#
+ARCH_DEP_CFLAGS = -DCPU=I80486 -m486 -DCPU_FAMILY=I80x86 -D_X86_ -g
+ 

config/CONFIG.sgi

@@ -0,0 +1,138 @@
+#
+# $Id$
+#
+#  This file is maintained by the EPICS community.
+
+# BUILD_TYPE
+#   Currently either Vx or Host
+BUILD_TYPE = Host
+ 
+ARCH_CLASS = sgi
+
+# Compiler and utility invocation (supply path to compiler here)
+#   (with warning flags built in)
+#  Paths to compilers
+GCC = cc
+ACC = cc
+
+AR = ar 
+ARCMD = $(AR) $(ARFLAGS)
+ARFLAGS = r
+
+RANLIB =
+YACC = $(EYACC)
+LEX = $(ELEX)
+G++ = g++
+CCC = CC
+
+CP=cp
+MV = mv
+RM=rm -f
+RMDIR = rm -rf
+MKDIR = mkdir
+CHMOD = "/bin/chmod"
+WHAT = what
+
+EXE=
+OBJ=.o
+
+ACC_ANSI_INVOKE_W_NO = $(ACC) -xansi -w
+ACC_ANSI_INVOKE_W_YES = $(ACC) -xansi
+ACC_STRICT_INVOKE_W_NO = $(ACC) -xansi -w
+ACC_STRICT_INVOKE_W_YES = $(ACC) -xansi
+ACC_TRAD_INVOKE_W_NO = $(ACC) -cckr -Xs -w
+ACC_TRAD_INVOKE_W_YES = $(ACC) -cckr -Xs
+GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
+GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
+GCC_STRICT_INVOKE_W_NO = $(GCC) -ansi -pedantic
+GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
+GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
+GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
+ 
+C_OLD = $(KRCC_TRAD_INVOKE_W_$(UNIX_WARN))
+C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
+C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
+CC = $(C_$(CMPLR))
+
+CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
+CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w 
+CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w 
+CCC_LD_FLAGS =
+CCC_LD_LIBS = 
+CCC_TEMPL_INST_FLAG =
+G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
+G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall 
+G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
+      -Wmissing-prototypes -Woverloaded-virtual \
+      -Wwrite-strings -Wconversion -Wstrict-prototypes\
+      -Wpointer-arith -Winline
+G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
+
+CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
+CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
+TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
+
+# GNU make likes CXX instead of CCC
+CXX = $(CXX_$(CXXCMPLR))
+
+
+# Static Build options
+ACC_SFLAGS_YES= -Bstatic
+ACC_SFLAGS_NO=
+CC_SFLAGS_YES= -Bstatic
+CC_SFLAGS_NO=
+GCC_SFLAGS_YES= -static
+GCC_SFLAGS_NO=
+
+SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
+SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
+SF_STRICT = $(SF_ANSI)
+UNIX_SFLAGS = $(SF_$(CMPLR))
+ 
+# Optimization
+OPTIM_YES = -O
+OPTIM_NO =
+UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
+
+# Include files
+UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
+                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
+ 
+# Operating system flags
+OP_SYS_FLAGS = -DUNIX
+ 
+UNIX_LDFLAGS = -L$(EPICS_BASE_LIB)
+UNIX_LDLIBS = -lm
+ 
+ARCH_DEP_CFLAGS = -DSGI
+ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
+
+UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
+ 
+UNIX_CXXFLAGS = $(UNIX_CFLAGS) 
+ 
+# Target specific flags
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
+TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+TARGET_LDLIBS = $($(basename $@)_LDLIBS)
+TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
+
+CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
+CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) \
+	$(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
+
+LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
+LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
+ 
+# Override defaults
+COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
+COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
+# Unlike the 'Unix' makesystem, output flags -o .. are now part of LINK.c[c]
+LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
+LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
+
+DEPENDS_RULE.c = -$(COMPILE.c) -M $(SRCS.c) > .DEPENDS
+DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.sgi

config/CONFIG.solaris

@@ -0,0 +1,168 @@
+#
+# $Id$
+#
+#  This file is maintained by the EPICS community.
+
+# BUILD_TYPE
+#   Currently either Vx or Host
+BUILD_TYPE = Host
+
+ARCH_CLASS = solaris
+ 
+# Compiler and utility invocation (supply path to compiler here)
+#   (with warning flags built in)
+#  Paths to compilers
+GCC = /opt/gnu/bin/gcc 
+ACC = $(SPARCWORKS)/bin/cc
+# SUNCC doesn't exist under Solaris
+
+#
+# required by sun's C++ compiler
+#
+AR = ar
+_AR = $(AR) $(ARFLAGS)
+G++_AR = $(_AR)
+CCC_AR = $(CCC) -xar -o
+ARCMD = $($(CPLUSPLUS)_AR)
+
+RANLIB =
+YACC = $(EYACC)
+LEX = $(ELEX)
+G++ = /opt/gnu/bin/g++
+CCC = /opt/SUNWspro/bin/CC
+
+CP=cp
+MV=mv
+RM=rm -f
+MKDIR=mkdir
+RMDIR=rm -rf
+CHMOD = "/bin/chmod"
+WHAT = what
+
+EXE=
+OBJ=.o
+
+ACC_ANSI_INVOKE_W_NO = $(ACC) -Xa -w
+ACC_ANSI_INVOKE_W_YES = $(ACC) -Xa
+ACC_STRICT_INVOKE_W_YES = $(ACC) -Xc -v
+ACC_TRAD_INVOKE_W_NO = $(ACC) -Xs -w
+ACC_TRAD_INVOKE_W_YES = $(ACC) -Xs
+ACC_LD_FLAGS = 
+ACC_LD_LIBS =
+SUNCC_TRAD_INVOKE_W_NO = $(ACC_TRAD_INVOKE_W_NO)
+SUNCC_TRAD_INVOKE_W_YES = $(ACC_TRAD_INVOKE_W_YES)
+GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w
+GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi
+GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic
+GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
+GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
+GCC_LD_LIBS = 
+GCC_LD_FLAGS =
+
+C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
+C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
+C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
+CC = $(C_$(CMPLR))
+
+LD_LIBS_OLD = $($(STANDARD)_LD_LIBS)
+LD_LIBS_ANSI = $($(ANSI)_LD_LIBS)
+LD_LIBS_STRICT = $($(ANSI)_LD_LIBS)
+CCOMPILER_LDLIBS = $(LD_LIBS_$(CMPLR))
+LD_FLAGS_OLD = $($(STANDARD)_LD_FLAGS)
+LD_FLAGS_ANSI = $($(ANSI)_LD_FLAGS)
+LD_FLAGS_STRICT = $($(ANSI)_LD_FLAGS)
+CCOMPILER_LDFLAGS = $(LD_FLAGS_$(CMPLR))
+
+CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
+CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w
+CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w
+CCC_LD_FLAGS = -L$(SPECIAL_LANG)
+CCC_LD_LIBS =
+CCC_TEMPL_INST_FLAG =
+G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
+G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall
+G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
+      -Wmissing-prototypes -Woverloaded-virtual \
+      -Wwrite-strings -Wconversion -Wstrict-prototypes\
+      -Wpointer-arith -Winline
+G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
+
+CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
+CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
+TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
+
+# GNU make likes CXX instead of CCC
+CXX = $(CXX_$(CXXCMPLR))
+
+# Static Build options
+#ACC_SFLAGS_YES= -dn
+ACC_SFLAGS_YES= -Bstatic
+ACC_SLIBS_YES= -lw -lintl -Bdynamic -ldl -Bstatic -lXext -lX
+ACC_SLIBS_NO=
+ACC_SFLAGS_NO=
+CC_SFLAGS_YES= -dn
+CC_SFLAGS_NO=
+GCC_SFLAGS_YES= -static
+GCC_SFLAGS_NO=
+
+SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
+SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
+SF_STRICT = $(SF_ANSI)
+UNIX_SFLAGS = $(SF_$(CMPLR))
+ 
+SL_OLD = $($(STANDARD)_SLIBS_$(STATIC_BUILD))
+SL_ANSI = $($(ANSI)_SLIBS_$(STATIC_BUILD))
+SL_STRICT = $(SL_ANSI)
+UNIX_SLIBS = $(SL_$(CMPLR))
+ 
+# Optimization
+OPTIM_YES = -O
+OPTIM_NO =
+UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
+
+# Include files
+UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
+                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
+ 
+# Operating system flags
+OP_SYS_FLAGS = -DUNIX
+ 
+UNIX_LDFLAGS = -L$(EPICS_BASE_LIB) $(CCOMPILER_LDFLAGS)
+UNIX_LDLIBS = $(UNIX_SLIBS) -lm $(CCOMPILER_LDLIBS)
+ 
+# Architecture specific build flags
+ARCH_DEP_CFLAGS = -DSOLARIS 
+ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
+ARCH_DEP_LDLIBS = -lsocket -lnsl
+# -lsocket     needed by libca.a
+# -lnsl        needed by libca.a 
+ 
+UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
+ 
+UNIX_CXXFLAGS = $(UNIX_CFLAGS)
+ 
+# Target specific flags
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
+TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+TARGET_LDLIBS = $($(basename $@)_LDLIBS)
+TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
+
+CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
+CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) \
+	$(ARCH_DEP_CXXFLAGS) $(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
+
+LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
+LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
+ 
+# Override SUN defaults
+COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
+COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
+# Unlike the 'Unix' makesystem, output flags -o .. are now part of LINK.c[c]
+LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
+LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
+
+DEPENDS_RULE.c = -$(COMPILE.c) -xM $(SRCS.c) > .DEPENDS
+DEPENDS_RULE.cc = -$(COMPILE.cc) -xM $(SRCS.cc) >> .DEPENDS

config/CONFIG.sun4

@@ -0,0 +1,167 @@
+#
+# $Id$
+#
+#  This file is maintained by the EPICS community.
+
+# BUILD_TYPE
+#   Currently either Vx or Host
+
+BUILD_TYPE = Host
+
+ARCH_CLASS=sun4
+ 
+# Compiler and utility invocation (supply path to compiler here)
+#   (with warning flags built in)
+#  Paths to compilers
+GCC = gcc 
+ACC = /usr/lang/acc
+SUNCC = cc
+RANLIB = ranlib
+RANLIBFLAGS = -t
+YACC = $(EYACC)
+LEX = $(ELEX)
+G++ = g++
+CCC = /usr/lang/CC
+
+RMDIR = rm -rf
+MKDIR = mkdir
+CHMOD = "/bin/chmod"
+CP=cp
+MV=mv
+RM=rm -f
+WHAT = what
+
+EXE=
+OBJ=.o
+
+#
+# original before use of sun C++
+#
+
+#
+# required by sun's C++ compiler
+#
+ARFLAGS = r
+AR = ar
+_AR = $(AR) $(ARFLAGS)
+G++_AR = $(_AR) 
+CCC_AR = $(CCC) -xar -o 
+ARCMD = $($(CPLUSPLUS)_AR)
+
+ACC_ANSI_INVOKE_W_NO = $(ACC) -Xa -w
+ACC_ANSI_INVOKE_W_YES = $(ACC) -Xa
+ACC_TRAD_INVOKE_W_NO = $(ACC) -Xs -w
+ACC_TRAD_INVOKE_W_YES = $(ACC) -Xs
+ACC_STRICT_INVOKE_W_NO = $(ACC) -Xc -w
+ACC_STRICT_INVOKE_W_YES = $(ACC) -Xc -vc
+ACC_LD_FLAGS = -L$(SPECIAL_LANG)
+ACC_LD_LIBS = 
+SUNCC_TRAD_INVOKE_W_NO = $(SUNCC) -w
+SUNCC_TRAD_INVOKE_W_YES = $(SUNCC)
+GCC_ANSI_INVOKE_W_NO = $(GCC) -ansi -w -D__USE_FIXED_PROTOTYPES__
+GCC_ANSI_INVOKE_W_YES = $(GCC) -ansi -D__USE_FIXED_PROTOTYPES__
+GCC_STRICT_INVOKE_W_NO = $(GCC) -ansi -pedantic -D__USE_FIXED_PROTOTYPES__
+GCC_STRICT_INVOKE_W_YES = $(GCC) -ansi -Wall -pedantic -D__USE_FIXED_PROTOTYPES__
+GCC_TRAD_INVOKE_W_NO = $(GCC) -traditional -w
+GCC_TRAD_INVOKE_W_YES = $(GCC) -traditional
+GCC_LD_LIBS = -liberty
+GCC_LD_FLAGS = 
+ 
+C_OLD = $($(STANDARD)_TRAD_INVOKE_W_$(UNIX_WARN))
+C_ANSI = $($(ANSI)_ANSI_INVOKE_W_$(UNIX_WARN))
+C_STRICT = $($(ANSI)_STRICT_INVOKE_W_YES)
+CC = $(C_$(CMPLR))
+
+LD_LIBS_OLD = $($(STANDARD)_LD_LIBS)
+LD_LIBS_ANSI = $($(ANSI)_LD_LIBS)
+LD_LIBS_STRICT = $($(ANSI)_LD_LIBS)
+CCOMPILER_LDLIBS = $(LD_LIBS_$(CMPLR))
+LD_FLAGS_OLD = $($(STANDARD)_LD_FLAGS)
+LD_FLAGS_ANSI = $($(ANSI)_LD_FLAGS)
+LD_FLAGS_STRICT = $($(ANSI)_LD_FLAGS)
+CCOMPILER_LDFLAGS = $(LD_FLAGS_$(CMPLR))
+
+CCC_NORMAL_INVOKE_W_NO = $(CCC) +p
+CCC_NORMAL_INVOKE_W_YES = $(CCC) +p +w 
+CCC_STRICT_INVOKE_W_YES = $(CCC) +p +w 
+CCC_LD_FLAGS = -L$(SPECIAL_LANG)
+CCC_LD_LIBS = 
+CCC_TEMPL_INST_FLAG =  
+G++_NORMAL_INVOKE_W_NO = $(G++) -ansi -pedantic -w
+G++_NORMAL_INVOKE_W_YES = $(G++) -ansi -pedantic -Wall 
+G++_STRICT_INVOKE_W_YES = $(G++) -ansi -pedantic -Wtraditional -Wall \
+      -Wmissing-prototypes -Woverloaded-virtual \
+      -Wwrite-strings -Wconversion -Wstrict-prototypes\
+      -Wpointer-arith -Winline
+G++_TEMPL_INST_FLAG = -DEXPL_TEMPL
+
+CXX_NORMAL = $($(CPLUSPLUS)_NORMAL_INVOKE_W_$(UNIX_WARN))
+CXX_STRICT = $($(CPLUSPLUS)_STRICT_INVOKE_W_YES)
+TEMPL_INST_CXXFLAG = $($(CPLUSPLUS)_TEMPL_INST_FLAG)
+
+# GNU make likes CXX instead of CCC
+CXX = $(CXX_$(CXXCMPLR))
+
+# Static Build options
+ACC_SFLAGS_YES= -Bstatic
+ACC_SFLAGS_NO=
+CC_SFLAGS_YES= -Bstatic
+CC_SFLAGS_NO=
+GCC_SFLAGS_YES= -static
+GCC_SFLAGS_NO=
+
+SF_OLD = $($(STANDARD)_SFLAGS_$(STATIC_BUILD))
+SF_ANSI = $($(ANSI)_SFLAGS_$(STATIC_BUILD))
+SF_STRICT = $(SF_ANSI)
+UNIX_SFLAGS = $(SF_$(CMPLR))
+ 
+# Optimization
+OPTIM_YES = -O
+OPTIM_NO =
+UNIX_OPT_FLAGS = $(OPTIM_$(UNIX_OPT))
+
+# Include files
+UNIX_INCLUDES = -I. -I.. $(USR_INCLUDES) -I$(INSTALL_INCLUDE) -I$(EPICS_BASE_INCLUDE) \
+                -I$(EPICS_BASE_INCLUDE)/os/$(T_A)
+ 
+# Operating system flags
+OP_SYS_FLAGS = -DUNIX
+ 
+
+UNIX_LDFLAGS = -L$(EPICS_BASE_LIB) $(CCOMPILER_LDFLAGS)
+
+UNIX_LDLIBS = -lm $(CCOMPILER_LDLIBS)
+
+ARCH_DEP_CFLAGS = -DSUNOS4
+ARCH_DEP_CXXFLAGS = $(ARCH_DEP_CFLAGS)
+UNIX_CFLAGS = $(UNIX_SFLAGS) $(UNIX_INCLUDES) $(OP_SYS_FLAGS)
+ 
+UNIX_CXXFLAGS = $(UNIX_CFLAGS)
+ 
+# Target specific flags
+TARGET_CFLAGS = $($(basename $@)_CFLAGS)
+TARGET_CXXFLAGS = $($(basename $@)_CXXFLAGS)
+TARGET_CPPFLAGS = $($(basename $@)_CPPFLAGS)
+TARGET_LDFLAGS = $($(basename $@)_LDFLAGS)
+TARGET_LDLIBS = $($(basename $@)_LDLIBS)
+TARGET_SNCFLAGS = $($(basename $@)_SNCFLAGS)
+
+CFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CFLAGS) $(USR_CFLAGS) $(ARCH_DEP_CFLAGS) $(UNIX_CFLAGS)
+CXXFLAGS = $(UNIX_OPT_FLAGS) $(TARGET_CXXFLAGS) $(USR_CXXFLAGS) $(ARCH_DEP_CXXFLAGS) \
+	$(UNIX_CXXFLAGS) $(TEMPL_INST_CXXFLAG)
+CPPFLAGS += $(TARGET_CPPFLAGS) $(USR_CPPFLAGS)
+
+LDFLAGS = $(SPECIAL_LDFLAGS) $(TARGET_LDFLAGS) $(USR_LDFLAGS) $(ARCH_DEP_LDFLAGS) $(UNIX_LDFLAGS)
+LDLIBS = $(TARGET_LDLIBS) $(USR_LDLIBS) $(ARCH_DEP_LDLIBS) $(UNIX_LDLIBS)
+ 
+# Override SUN defaults
+COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
+COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c
+
+# changed from 'Unix' makesystem:
+# link command now contains the output flag '-o $@'
+LINK.c = $(CC) -o $@ $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
+LINK.cc = $(CXX) -o $@ $(CXXFLAGS) $(CPPFLAGS) $(LDFLAGS)
+
+DEPENDS_RULE.c = -$(COMPILE.c) -M $(SRCS.c) > .DEPENDS
+DEPENDS_RULE.cc = @echo no DEPENDS_RULE.cc defined in CONFIG.sun4

config/CONFIG_BASE

@@ -0,0 +1,55 @@
+#
+#  $Id$
+#
+
+# the order of following list is important
+
+#
+# for c++ build add the dirs gdd and cas after ca
+# (and uncomment the c++ files in src/lbCom/Makefile.Unix)
+#
+DIRS = tools 
+DIRS += include 
+DIRS += cxxTemplates 
+DIRS += toolsComm
+DIRS += libCom 
+DIRS += libvxWorks
+DIRS += cvtDctsdr 
+DIRS += dbStatic 
+DIRS += db 
+DIRS += bpt 
+DIRS += ca 
+DIRS += util 
+DIRS += misc 
+DIRS += sequencer 
+DIRS += dbtools 
+DIRS += rsrv
+DIRS += rec
+DIRS += as 
+DIRS += drv
+DIRS += dev
+DIRS += devOpt
+DIRS += iocCore
+
+#
+# if CPLUSPLUS isnt empty then include C++ src codes
+#
+DIRS += $(patsubst %,gdd,$(strip $(CPLUSPLUS)))
+DIRS += $(patsubst %,cas,$(strip $(CPLUSPLUS)))
+
+EPICS_BASE = $(TOP)
+
+# EPICS include config file
+include $(EPICS_BASE)/config/CONFIG
+
+EPICS_BASE = $(INSTALL_LOCATION)
+
+#
+# this speeds up the build by turning off implicit rules search
+#
+.PHONY:: $(EPICS_BASE)/config/CONFIG
+.PHONY:: $(EPICS_BASE)/config/CONFIG.* $(EPICS_BASE)/config/CONFIG_* 
+.PHONY:: $(EPICS_BASE)/config/RULES.* $(EPICS_BASE)/config/RULES_* .DEPENDS
+.PHONY:: $(HOME)/.EPICS_CONFIG $(HOME)/.EPICS_CONFIG.$(HOST_ARCH)
+.PHONY:: ../Makefile.Vx ../Makefile.Unix ../Makefile.Host Makefile
+

config/CONFIG_BASE_VERSION

@@ -0,0 +1,19 @@
+#
+#  $Id$
+#
+#  EPICS Version information
+#
+# This file is interpreted by the Bourne Shell (MakeRelease), so spaces are
+# not allowed around the '=' signs or in unquoted values.
+#
+
+EPICS_VERSION=3
+EPICS_REVISION=13
+EPICS_MODIFICATION=0
+EPICS_UPDATE_NAME=beta
+EPICS_UPDATE_LEVEL=9
+
+EPICS_VERSION_STRING="EPICS Version ${EPICS_VERSION}.${EPICS_REVISION}.${EPICS_MODIFICATION}.${EPICS_UPDATE_NAME}${EPICS_UPDATE_LEVEL}"
+
+CVS_DATE="\$$Date$$"
+

config/CONFIG_COMMON

@@ -0,0 +1,84 @@
+#
+#  $Id$
+#
+#  CONFIG_COMMON - Another EPICS BASE config file
+#	by Matthew Needes and Mike Bordua
+#
+#  This file is to be maintained by the EPICS community.
+#
+
+# Common Configuration Information 
+
+# CROSS1 will be defined only when CROSS_COMPILER_HOST_ARCHS is NOT defined
+CROSS1 = $(CROSS_COMPILER_TARGET_ARCHS$(word 1,$(CROSS_COMPILER_HOST_ARCHS)))
+ 
+# CROSS2 will be defined only when CROSS_COMPILER_HOST_ARCHS is defined
+# and HOST_ARCH is one of it's words  
+CROSS2 = $(CROSS_COMPILER_TARGET_ARCHS$(filter-out 1,$(words $(filter $(HOST_ARCH),$(CROSS_COMPILER_HOST_ARCHS)))))
+ 
+BUILD_ARCHS = $(HOST_ARCH) $(CROSS1) $(CROSS2)
+ 
+INSTALL_LOCATION = $(TOP)
+ 
+INSTALL_LOCATION_LIB        = $(INSTALL_LOCATION)/lib
+INSTALL_LOCATION_BIN        = $(INSTALL_LOCATION)/bin
+
+INSTALL_INCLUDE             = $(INSTALL_LOCATION)/include
+INSTALL_DOC                 = $(INSTALL_LOCATION)/doc
+INSTALL_MAN                 = $(INSTALL_LOCATION)/man
+INSTALL_TEMPLATES           = $(INSTALL_LOCATION)/templates
+INSTALL_DBD                 = $(INSTALL_LOCATION)/dbd
+INSTALL_CONFIG              = $(INSTALL_LOCATION)/config
+
+EPICS_BASE_INCLUDE      = $(EPICS_BASE)/include
+EPICS_BASE_DBD          = $(EPICS_BASE)/dbd
+
+EPICS_EXTENSIONS_INCLUDE      = $(EPICS_EXTENSIONS)/include
+EPICS_EXTENSIONS_TEMPLATES    = $(EPICS_EXTENSIONS)/templates
+
+DIVIDER = .
+
+# private versions of lex/yacc from EPICS
+EYACC = $(EPICS_BASE)/bin/$(HOST_ARCH)/antelope$(EXE)
+ELEX = $(EPICS_BASE)/bin/$(HOST_ARCH)/e_flex$(EXE) -S$(EPICS_BASE_INCLUDE)/flex.skel.static
+
+# Default for perl if it's on the PATH,
+# otherwise override this in e.g. CONFIG_SITE
+PERL=perl
+
+# install from EPICS
+INSTALL = $(PERL) $(EPICS_BASE)/bin/$(HOST_ARCH)/installEpics.pl
+INSTALL_PRODUCT = $(INSTALL)
+
+# dbtools from EPICS
+
+# state notation language compiler (installed from base/src/sequencer)
+SNC = $(EPICS_BASE)/bin/$(HOST_ARCH)/snc
+
+# vxWorks definitions
+VX_CONFIG_DIR = $(VX_DIR)/config
+VX_INCLUDE = $(VX_DIR)/h
+VX_GNU_BIN = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/bin
+VX_GNU_LIB = $(VX_GNU)/$(HOST_ARCH).$(ARCH_CLASS)/lib
+
+ifdef T_A
+
+INSTALL_LIB                 = $(INSTALL_LOCATION_LIB)/$(T_A)
+INSTALL_TCLLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
+INSTALL_BIN                 = $(INSTALL_LOCATION_BIN)/$(T_A)
+
+EPICS_BASE_LIB          = $(EPICS_BASE)/lib/$(T_A)
+EPICS_BASE_BIN          = $(EPICS_BASE)/bin/$(T_A)
+
+EPICS_EXTENSIONS_LIB          = $(EPICS_EXTENSIONS)/lib/$(T_A)
+EPICS_EXTENSIONS_BIN          = $(EPICS_EXTENSIONS)/bin/$(T_A)
+
+VX_IMAGE = $(VX_CONFIG_DIR)/$(T_A)/vxWorks
+VX_IMAGE_SYM = $(VX_CONFIG_DIR)/$(T_A)/vxWorks.sym
+
+# location of installed vxWorks image
+EPICS_VX_IMAGE = $(EPICS_BASE_BIN)/vxWorks
+EPICS_VX_IMAGE_SYM = $(EPICS_BASE_BIN)/vxWorks.sym
+
+endif
+

config/CONFIG_ENV

@@ -0,0 +1,75 @@
+#	$Id$
+#	Author:	Andrew Johnson
+#	Date:	20 April 1995
+#
+#	Experimental Physics and Industrial Control System (EPICS)
+#
+#	CONFIG_ENV - EPICS Environment Parameter configuration file
+#
+# This file is interpreted by the Bourne Shell, so spaces are 
+# not allowed around the '=' signs or in unquoted values.
+# Makefile variables are not defined here.
+#
+# Note: This file is read by base/src/libCom/bldEnvdata.pl,
+# so the variable definitions in here should be kept 'simple':
+#	VAR=VALUE
+# each one on a single line.
+#
+
+
+#  Default environment settings
+
+# Channel Access:
+# EPICS_CA_ADDR_LIST augment beacon/search dest ip addr list
+#	from white space separated ip addresses in this
+#	environment variable. "Quote" if more than one addr.
+# EPICS_CA_AUTO_ADDR_LIST YES = augment beacon/search dest ip
+#	addr list from network interfaces found; NO = only use
+#	EPICS_CA_ADDR_LIST to create this list.
+# EPICS_CA_CONN_TMO sec before sending echo request from client.
+# EPICS_CA_REPEATER_PORT CA repeater port number.
+# EPICS_CA_SERVER_PORT CA server port number.
+
+EPICS_CA_ADDR_LIST=""
+EPICS_CA_AUTO_ADDR_LIST=YES
+EPICS_CA_CONN_TMO=30.0
+EPICS_CA_REPEATER_PORT=5065
+EPICS_CA_SERVER_PORT=5064
+
+#
+# These parameters are only used by the CA server library
+#
+# EPICS_CA_BEACON_PERIOD quiescent sec between server beacons.
+# EPICS_CAS_INTF_ADDR_LIST - list of IP addresses identifying
+#	a limited set of interfaces that the server should bind to.
+#	If this parameter is empty then connections are accepted
+#	from any interface. Beacons are sent only to the broadcast
+#	address of each interface in this list (or the destination 
+#	address of point to point interfaces) if EPICS_CA_AUTO_ADDR_LIST
+#	is YES. Type "ifconfig -a" in order to determine which 
+# 	interfaces are available.
+# EPICS_CAS_BEACON_ADDR_LIST - If this parameter is specified
+#	or if EPICS_CAS_INTF_ADDR_LIST isnt empty then this parameter
+#	is used instead of EPICS_CA_ADDR_LIST by the server library 
+# 	to augment the list of addresses to send beacons to.
+# EPICS_CAS_SERVER_PORT - If this parameter is specified then it
+#	and not EPICS_CA_SERVER_PORT is used to determine the server's
+# 	port number.
+#
+EPICS_CA_BEACON_PERIOD=15.0
+EPICS_CAS_INTF_ADDR_LIST=""
+EPICS_CAS_BEACON_ADDR_LIST=""
+EPICS_CAS_SERVER_PORT=
+
+
+# Log Server:
+# EPICS_IOC_LOG_PORT Log server port number.
+
+EPICS_IOC_LOG_PORT=7004
+
+
+# Other services:
+
+EPICS_CMD_PROTO_PORT=
+EPICS_AR_PORT=7002
+

config/CONFIG_SITE

@@ -0,0 +1,117 @@
+#
+#  $Id$
+#
+#  CONFIG_SITE  - EPICS BASE config file
+#	by Matthew Needes and Mike Bordua
+#
+#  This file is to be modified by the EPICS system manager
+#	only.
+#
+
+
+#  The host architecture performing the build,
+#	i.e.: the arch running DCT/getrel/etc.
+#
+#  Currently Supporting:
+#	sun4
+#	hp700
+#	alpha
+#	solaris
+#	sgi
+#	Linux
+#	WIN32
+#
+#  HOST_ARCH now an environment variable
+#  HOST_ARCH=$(shell /usr/local/epics/startup/HostArch)
+ifndef HOST_ARCH
+	HOST_ARCH=unsupported
+endif
+
+#  The architectures to build EPICS for
+#
+#  Currently Supporting:
+#       mv167
+#       mv162
+#       mv162lc
+#       mv147
+#       hkv2f
+#	niCpu030
+#	pc486
+#
+CROSS_COMPILER_TARGET_ARCHS=mv167
+
+#  If only a subset of the host architectures perform
+#  the build for the CROSS_COMPILER_TARGET_ARCHS 
+#  uncomment the following line and specify them.
+#
+#CROSS_COMPILER_HOST_ARCHS=sun4
+
+#  VxWorks directory
+#VX_DIR=/usr/csite/vw/5.1.1/vw
+#VX_DIR=/usr/local/vw/vxV51.mm
+#VX_DIR=/usr/local/vw/vxV52/vw
+VX_DIR=/usr/local/vw/vxV52p1/vw
+
+#  Gnu directory for gcc
+#VX_GNU = $(VX_DIR)
+VX_GNU = $(VX_DIR)/../vxgccV2.2.3.1
+
+#  Gnu directory for g++
+GNU_DIR = /usr/local/hideos/gnu_install-2.7.2
+GNU_BIN = $(GNU_DIR)/bin
+GNU_LIB = $(GNU_DIR)/lib
+
+#  Client ANSI Compiler
+#   GCC     (gcc -ansi)
+#   ACC     (acc)
+#   HPACC   (cc -Aa)
+#ANSI=HPACC
+ANSI=ACC
+ 
+#  Client Standard C Compiler choice
+#   GCC     (gcc -traditional)
+#   ACC     (acc -Xs)
+#   SUNCC   (cc)
+#   HPCC    (cc -Ac)
+#STANDARD=HPCC
+STANDARD=ACC
+ 
+#  C++ Compiler 
+#   G++     (g++)   GNU C++
+#   CCC     (CC)    OS VENDOR C++
+#CPLUSPLUS=G++
+#CPLUSPLUS=	# use this if site does not have C++ compiler
+CPLUSPLUS=CCC
+
+#  Build client objects statically ?
+#        must be either YES or NO
+STATIC_BUILD=NO
+
+#  Unix Optimization
+#	must be either YES or NO
+UNIX_OPT=YES
+
+#  VxWorks Optimization
+#	must be either YES or NO
+VX_OPT=YES
+ 
+#  Generate Verbose Compiler Warnings for Unix
+#	must be either YES or NO
+UNIX_WARN=YES
+
+#  Generate Verbose Compiler Warnings for VxWorks
+#	must be either YES or NO
+VX_WARN=YES
+
+# sch2edif compiler and flags
+SCH2EDIF = sch2edif
+SCH2EDIF_PATH =
+SCH2EDIF_SYSFLAGS = -n -ap -p.+..+$(SCH2EDIF_PATH)+$(EPICS_EXTENSIONS)/templates/capfast/sym+
+SCH2EDIF_FLAGS =
+ 
+# e2db and flags
+#    - again there is an assumption where edb.def is installed.
+E2DB = $(EPICS_EXTENSIONS)/bin/$(HOST_ARCH)/e2db
+E2DB_SYSFLAGS = -ate -d $(EPICS_EXTENSIONS)/templates/capfast/edb.def
+E2DB_FLAGS =
+

config/CONFIG_SITE.Linux

@@ -0,0 +1,20 @@
+#
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Default SUN compiler, individual Makefiles will override
+#  if they cannot support ANSI compilation.
+#   STRICT -  ANSI C - force warning flags
+#   ANSI   -  ANSI C
+#   OLD    -  Standard C - Not appropriate here.
+CMPLR=ANSI
+
+# Default SUN C++ compiler, individual Makefiles will override
+#  if they are coded to a higher standard.
+#   STRICT -  ANSI C++ force strict warning flags
+#   NORMAL -  ANSI C++ optional warning flags
+CXXCMPLR=NORMAL
+#CXXCMPLR=STRICT
+

config/CONFIG_SITE.Vx.68k.cygwin32

@@ -0,0 +1,29 @@
+# $Id$
+#
+# This file is maintained by the EPICS community.
+
+
+#  Site host architecture specific overrides for Vx.68k
+#
+
+ANSI=GCC
+STANDARD=GCC
+CPLUSPLUS=G++
+
+VX_DIR=/vw/vxV52p1/vw
+VX_GNU=/usr/local
+
+VX_GNU_BIN = $(VX_GNU)/bin
+VX_GNU_LIB = $(VX_GNU)/lib
+
+AR=$(VX_GNU_BIN)/m68k-wrs-vxworks-ar.exe
+RANLIB=$(VX_GNU_BIN)/m68k-wrs-vxworks-ranlib.exe
+CC=$(VX_GNU_BIN)/m68k-wrs-vxworks-gcc.exe -B$(VX_GNU_LIB)/gcc-lib/ -nostdinc
+G++=$(VX_GNU_BIN)/m68k-wrs-vxworks-g++.exe -B$(VX_GNU_LIB)/gcc-lib/ -nostdinc
+CPP=$(VX_GNU_BIN)/m68k-wrs-vxworks-cpp.exe -nostdinc
+LD=$(VX_GNU_BIN)/m68k-wrs-vxworks-ld.exe -r
+
+# Not in cygwin32
+WHAT = echo
+
+

config/CONFIG_SITE.WIN32

@@ -0,0 +1,7 @@
+#
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+

config/CONFIG_SITE.alpha

@@ -0,0 +1,21 @@
+#
+# CONFIG_SITE.Unix.alpha
+#
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Default compiler, individual Makefiles will override
+#  if they cannot support ANSI compilation.
+#   STRICT -  ANSI C - force warning flags
+#   ANSI   -  ANSI C
+#   OLD    -  Standard C - Not appropriate here.
+CMPLR=ANSI
+
+# Default SUN C++ compiler, individual Makefiles will override
+#  if they are coded to a higher standard.
+#   STRICT -  ANSI C++ force strict warning flags
+#   NORMAL -  ANSI C++ optional warning flags
+CXXCMPLR=NORMAL
+#CXXCMPLR=STRICT
+

config/CONFIG_SITE.cygwin32

@@ -0,0 +1,21 @@
+#
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+
+# Default compiler, individual Makefiles will override
+#  if they cannot support ANSI compilation.
+#   STRICT -  ANSI C - force warning flags
+#   ANSI   -  ANSI C
+#   OLD    -  Standard C - Not appropriate here.
+CMPLR=ANSI
+
+# Default C++ compiler, individual Makefiles will override
+#  if they are coded to a higher standard.
+#   STRICT -  ANSI C++ force strict warning flags
+#   NORMAL -  ANSI C++ optional warning flags
+CXXCMPLR=NORMAL
+
+SPECIAL_LANG = .

config/CONFIG_SITE.hkv2f

@@ -0,0 +1,9 @@
+
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Epics defs
+
+

config/CONFIG_SITE.hp700

@@ -0,0 +1,21 @@
+#
+# CONFIG_SITE.Unix.hp700
+#
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Default compiler, individual Makefiles will override
+#  if they cannot support ANSI compilation.
+#   STRICT -  ANSI C - force warning flags
+#   ANSI   -  ANSI C
+#   OLD    -  Standard C - Not appropriate here.
+CMPLR=ANSI
+
+# Default SUN C++ compiler, individual Makefiles will override
+#  if they are coded to a higher standard.
+#   STRICT -  ANSI C++ force strict warning flags
+#   NORMAL -  ANSI C++ optional warning flags
+CXXCMPLR=NORMAL
+#CXXCMPLR=STRICT
+

config/CONFIG_SITE.mv147

@@ -0,0 +1,9 @@
+
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Epics defs
+
+

config/CONFIG_SITE.mv162

@@ -0,0 +1,9 @@
+
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Epics defs
+
+

config/CONFIG_SITE.mv162lc

@@ -0,0 +1,9 @@
+
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Epics defs
+
+

config/CONFIG_SITE.mv167

@@ -0,0 +1,9 @@
+
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Epics defs
+
+

config/CONFIG_SITE.mv177

@@ -0,0 +1,9 @@
+
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Epics defs
+
+

config/CONFIG_SITE.niCpu030

@@ -0,0 +1,9 @@
+
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Epics defs
+
+

config/CONFIG_SITE.pc486

@@ -0,0 +1,6 @@
+# $Log$
+# Revision 1.1.2.1  1996/11/25 20:20:22  jhill
+# installed
+#
+# -kuk-
+

config/CONFIG_SITE.sgi

@@ -0,0 +1,27 @@
+#
+# $Id$
+#
+# Revision 1.2  1994/06/28  00:02:32  bordua
+# First cut at the RULES and CONFIGS.
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Default SUN compiler, individual Makefiles will override
+#  if they cannot support ANSI compilation.
+#   STRICT -  ANSI C - force warning flags
+#   ANSI   -  ANSI C
+#   OLD    -  Standard C - Not appropriate here.
+CMPLR=ANSI
+
+# Default SUN C++ compiler, individual Makefiles will override
+#  if they are coded to a higher standard.
+#   STRICT -  ANSI C++ force strict warning flags
+#   NORMAL -  ANSI C++ optional warning flags
+CXXCMPLR=NORMAL
+#CXXCMPLR=STRICT
+
+# Special C library requirements
+SPECIAL_LANG = 
+
+

config/CONFIG_SITE.solaris

@@ -0,0 +1,26 @@
+#
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Default SUN compiler, individual Makefiles will override
+#  if they cannot support ANSI compilation.
+#   STRICT -  ANSI C - force warning flags
+#   ANSI   -  ANSI C
+#   OLD    -  Standard C - Not appropriate here.
+CMPLR=ANSI
+
+# Default SUN C++ compiler, individual Makefiles will override
+#  if they are coded to a higher standard.
+#   STRICT -  ANSI C++ force strict warning flags
+#   NORMAL -  ANSI C++ optional warning flags
+CXXCMPLR=NORMAL
+#CXXCMPLR=STRICT
+
+# Unbundled C compiler stuff
+SPARCWORKS = /opt/SUNWspro
+#SPECIAL_LANG = $(SPARCWORKS)/lib
+SPECIAL_LANG = .
+
+

config/CONFIG_SITE.sun4

@@ -0,0 +1,31 @@
+#
+# $Id$
+#
+# Site Specific Configuration Information
+# Only the local epics system manager should modify this file
+
+# Default SUN compiler, individual Makefiles will override
+#  if they cannot support ANSI compilation.
+#   STRICT -  ANSI C - force warning flags
+#   ANSI   -  ANSI C
+#   OLD    -  Standard C - Not appropriate here.
+
+CMPLR=ANSI
+
+# Default SUN C++ compiler, individual Makefiles will override
+#  if they are coded to a higher standard.
+#   STRICT -  ANSI C++ force strict warning flags
+#   NORMAL -  ANSI C++ optional warning flags
+CXXCMPLR=NORMAL
+#CXXCMPLR=STRICT
+
+#CMPLR=STRICT
+#ANSI=GCC
+#STANDARD=GCC
+#CPLUSPLUS=G++
+
+# Special C library requirements
+#SPECIAL_LANG = /usr/lang/SC3.0.1
+#SPECIAL_LANG = /usr/lang/lib
+SPECIAL_LANG = .
+

config/CONFIG_SITE_ENV

@@ -0,0 +1,45 @@
+#	$Id$
+#	Author:	Andrew Johnson
+#	Date:	1 May 1995
+#
+#	Experimental Physics and Industrial Control System (EPICS)
+#
+#	CONFIG_SITE_ENV - EPICS Environment Parameter Site configuration file
+#
+# This file is interpreted by the Bourne Shell, so spaces are 
+# not allowed around the '=' signs or in unquoted values.
+# Makefile variables are not defined here.
+#
+# Note: This file is read by base/src/libCom/bldEnvdata.pl,
+# so the variable definitions in here should be kept 'simple':
+#	VAR=VALUE
+# each one on a single line.
+#
+
+#  Site-specific environment settings
+
+# Time service:
+# EPICS_TS_MIN_WEST the local time difference from GMT.
+# EPICS_TS_NTP_INET ntp or Unix time server ip addr.
+
+EPICS_TS_MIN_WEST=360
+EPICS_TS_NTP_INET=
+
+
+# Log Server:
+# EPICS_IOC_LOG_INET 
+#	Log server ip addr.
+# EPICS_IOC_LOG_FILE_NAME 
+#	pathname to the log file.
+# EPICS_IOC_LOG_FILE_LIMIT 
+#	maximum log file size.
+# EPICS_IOC_LOG_FILE_COMMAND 
+# 	A shell command string used to obtain a new 
+#       path name in response to SIGHUP - the new path name will
+#       replace any path name supplied in EPICS_IOC_LOG_FILE_NAME
+
+EPICS_IOC_LOG_INET=164.54.8.167
+EPICS_IOC_LOG_FILE_NAME=/home/phebos1/epics/apple/log/iocLog.text
+EPICS_IOC_LOG_FILE_COMMAND=
+EPICS_IOC_LOG_FILE_LIMIT=1000000
+

config/HostSys.txt

@@ -0,0 +1,105 @@
+Short Description of the "Host" (vs. "Unix") Build System
+---------------------------------------------------------
+
+	7-30-96  -kuk-
+	questions/comments please mailto:kasemir@atdiv.lanl.gov
+
+
+To build EPICS on the WIN32 architecture
+the "old" make-system using Makefile.Unix in each
+subdir and RULES.Host was not suitable because
+it is too much Unix-dependent.
+
+A "new" system using Makefile.Host and RULES.Host
+was used instead. This "host" system should work
+on all other architectures as well.
+The idea is that ALL architectures should be able to use
+the "host" system in future because.
+
+The syntax of the 'Host' Makefiles is described
+in 'Sample.Makefile.Host'. Any suggestions for a
+better syntax (in connection whith ideas how to
+implement this in RULES.Host!) are very welcome!
+
+To use it, only a few changes should be necessary:
+
+A) In CONFIG.<WIN32, sun4, hp700, ... whatever you are using>:
+
+1) Set
+	BUILD_TYPE=Host
+   instead of 'Unix'. This switches you over to using
+   Makefile.Host instead of Makefile.Unix.
+
+2) Set ARCH_CLASS to the correct architecture class.
+   (ARCH_CLASS used to be defined in the past, right now
+    it seems it's only set for VxWorks targets, not hosts).
+
+   ARCH_CLASS is used to define system-dependent
+   CFLAGS, library contents etc. in Makefile.Host,
+   so it should describe the general architecture,
+   maybe 
+	WIN32 : this is the only one really supported in Makefile.Host by now
+	BSD for sun4,
+	SYSV for ??,
+   
+   Maybe this "general arch" is not sufficient, so we will
+   end up using
+       ARCH_CLASS=WIN32, sun4, hp700, ....
+   as it used to be.
+
+3) Make sure that the following (new) macros are defined:
+
+   CP   =$(PERL) $(EPICS_BASE)/src/tools/cp.pl
+   MV   =$(PERL) $(EPICS_BASE)/src/tools/mv.pl
+   RM   =$(PERL) $(EPICS_BASE)/src/tools/rm.pl -f
+   MKDIR=$(PERL) $(EPICS_BASE)/src/tools/mkdir.pl
+   RMDIR=$(PERL) $(EPICS_BASE)/src/tools/rm.pl -rf
+   or
+   CP=cp
+   MV=mv
+   RM=rm -f
+   MKDIR=mkdir
+   RMDIR=rm -rf
+
+   EXE=
+   OBJ=.o
+
+4) LINK.c and LINK.cc must now include the target-flag, e.g.:
+   LINK.c = $(CC) $(LDFLAGS) -o $@
+
+   because the "-o $@" is also system dependent (it's -Fe$@ for WIN32)
+
+5) The bin directory for the host based epics tools
+	$(EPICS)/base/bin/$(HOST_ARCH)
+   must be in your PATH.
+
+
+B) Adjust Makefile.Host
+
+  If you are trying to build EPICS now, there might be errors
+  because the Makefile.Host files are only tested on WIN32, yet.
+
+  If changes are necessare in some base/src/???/Makefile.Host,
+  refer to Sample.Makefile.Host in the base/config dir.
+
+
+
+
+The current make-system for WIN32
+needs
+* gnumake (OK, sources for WIN32 are available)
+* several UNIX tools: sed, grep, ... (dito)
+* a UNIX-like shell (ouch!)
+
+I found no fully operational shell and no sources for WIN32 so far,
+Cygnus' bash e.g. cannot handle this:
+(echo a>a; echo b>>a)
+Right now I use the knts that I wrote and simplified scripts.
+Jeff eliminated many shell-lines in Makefile.*,
+the final solution could be:
+1) replace shell, awk, grep, sed, ... by  Perl!
+2) use C code
+
+Perl looks like a real option because it's available
+for many platforms and maybe the best idea for
+'portable scripts'.

config/Makefile

@@ -0,0 +1,10 @@
+#
+# $Id$
+#
+
+TOP=..
+
+include $(TOP)/config/CONFIG_BASE
+
+include $(TOP)/config/RULES_ARCHS
+

config/Makefile.Host

@@ -0,0 +1,57 @@
+#
+# $Id$
+#
+
+TOP = ../..
+include $(TOP)/config/CONFIG_BASE
+
+CONFIGS += CONFIG
+CONFIGS += CONFIG_BASE
+CONFIGS += CONFIG_BASE_VERSION
+CONFIGS += CONFIG_COMMON
+CONFIGS += CONFIG_ENV
+
+CONFIGS += CONFIG.WIN32
+CONFIGS += CONFIG.pc486
+CONFIGS += CONFIG.Linux
+CONFIGS += CONFIG.alpha
+CONFIGS += CONFIG.hp700
+CONFIGS += CONFIG.sgi
+CONFIGS += CONFIG.solaris
+CONFIGS += CONFIG.sun4
+CONFIGS += CONFIG.hkv2f
+CONFIGS += CONFIG.mv147
+CONFIGS += CONFIG.mv162
+CONFIGS += CONFIG.mv162lc
+CONFIGS += CONFIG.mv167
+CONFIGS += CONFIG.niCpu030
+
+CONFIGS += CONFIG.Vx.68k
+
+CONFIGS += CONFIG_SITE
+CONFIGS += CONFIG_SITE_ENV
+
+CONFIGS += CONFIG_SITE.WIN32
+CONFIGS += CONFIG_SITE.pc486
+CONFIGS += CONFIG_SITE.Linux
+CONFIGS += CONFIG_SITE.alpha
+CONFIGS += CONFIG_SITE.hp700
+CONFIGS += CONFIG_SITE.sgi
+CONFIGS += CONFIG_SITE.solaris
+CONFIGS += CONFIG_SITE.sun4
+CONFIGS += CONFIG_SITE.hkv2f
+CONFIGS += CONFIG_SITE.mv147
+CONFIGS += CONFIG_SITE.mv162lc
+CONFIGS += CONFIG_SITE.mv162
+CONFIGS += CONFIG_SITE.mv167
+CONFIGS += CONFIG_SITE.niCpu030
+
+CONFIGS += RULES.Host
+CONFIGS += RULES.Vx
+CONFIGS += RULES_ARCHS
+CONFIGS += RULES_DIRS
+CONFIGS += RULES_TOP
+CONFIGS += RULES.Db
+CONFIGS += RULES.ioc
+
+include $(TOP)/config/RULES.Host

config/Makefile.Unix

@@ -0,0 +1,30 @@
+#
+# $Id$
+#
+
+TOP = ../..
+include $(TOP)/config/CONFIG_BASE
+
+CONFIGS += CONFIG
+CONFIGS += CONFIG_BASE
+CONFIGS += CONFIG_COMMON
+CONFIGS += CONFIG_ENV
+
+CONFIGS += CONFIG.Vx.68k
+
+CONFIGS += CONFIG_SITE
+CONFIGS += CONFIG_SITE_ENV
+
+CONFIGS += $(HOST_ARCH:%=CONFIG.%)
+CONFIGS += $(CROSS_COMPILER_TARGET_ARCHS:%=CONFIG.%)
+CONFIGS += $(HOST_ARCH:%=CONFIG_SITE.%)
+CONFIGS += $(CROSS_COMPILER_TARGET_ARCHS:%=CONFIG_SITE.%)
+
+CONFIGS += RULES.Unix
+CONFIGS += RULES.Vx
+CONFIGS += RULES_ARCHS
+CONFIGS += RULES_DIRS
+CONFIGS += RULES_TOP
+
+include $(TOP)/config/RULES.Unix
+

config/RULES.Db

@@ -0,0 +1,59 @@
+#RULES.Db
+SUBTOOL = $(EPICS_BASE_BIN)/subtool
+PREFIX=$(shell echo $* | sed -e 's-[0-9]--g' | sed -e 's-\.db--g')
+ARCHS += $(BUILD_ARCHS) host cross
+ACTIONS += clean inc depends buildInstall build
+actionArchTargets = $(foreach action, $(ACTIONS) install,\
+                    $(foreach arch, $(ARCHS), \
+                    $(action)$(DIVIDER)$(arch)))
+ 
+all install :: inc buildInstall
+
+buildInstall: .DEPENDS dbd $(DBFROMTEMPLATE) $(INDDBFROMTEMPLATE) $(PROD)
+
+inc build depends:
+
+$(TOP)/dbd:
+	$(MKDIR) $(TOP)/dbd
+
+dbd:	$(TOP)/dbd
+ifndef WIN32
+	ln -s $(TOP)/dbd dbd
+endif
+
+
+$(DBFROMTEMPLATE):%.db: %.template %.substitutions
+	$(RM) $@
+	$(SUBTOOL) $*.template $*.substitutions > $@
+
+
+$(INDDBFROMTEMPLATE):%.db: %.substitutions
+	$(RM) $@
+ifndef WIN32
+	$(SUBTOOL) $(PREFIX).template $*.substitutions > $@
+endif
+
+.DEPENDS: Makefile
+	@$(RM) $@
+ifndef WIN32
+	@for NAME in $(INDDBFROMTEMPLATE) garbage_marty ; do \
+	    if [ $$NAME != garbage_marty ] ; then \
+		PREFIX="`echo $$NAME | sed -e 's-[0-9]--g' | sed -e 's-\.db--g'`";\
+		echo "$$NAME: $$PREFIX.template" >> $@;\
+	    fi ; \
+        done 
+endif
+
+clean::
+	@$(RM) dbd  $(DBFROMTEMPLATE) $(INDDBFROMTEMPLATE) .DEPENDS $(PROD)
+
+$(actionArchTargets) :%: 
+	$(MAKE) $(word 1, $(subst $(DIVIDER), ,$@))
+ 
+$(ARCHS):%: install
+ 
+.PHONY :: $(ARCHS) $(ACTIONS)
+.PHONY :: $(actionArchTargets)
+
+-include .DEPENDS
+

config/RULES.Host

@@ -0,0 +1,601 @@
+#
+# $Id$
+#
+#	Rules for making things specified in Makefile.Host
+#
+#	Some rules for filename-massage are system specific
+#	and have "ifdefs" here instead of using definitions
+#	from CONFIG.Host.$(ARCH_CLASS)  -  sorry about this,
+#	but so far the rules are quite similar on all systems
+#	except WIN32 has some specials.
+#
+#	Maybe there is a way to use indentation to make it
+#	easier to read this file?
+#
+#	Most things may also work if you say e.g.
+#		VAR+=ADD
+#	even if ADD is not there, but this way "VAR" would
+#	be defined in any case, that's why I try to use
+#		ifdef ADD
+#		VAR+=ADD
+#		endif
+#
+#	-kuk-
+
+#	we are in O.$(ARCH_CLASS), but most sources are one dir above:
+#
+#	The use of VPATH (no suffix specification) caused everything
+#	to break several times.
+#	vpath, of course, has the disadvantage that we need explicit rules
+#	for scripts or similar os-specific filed which have _no_ suffix...
+vpath %.c $(USER_VPATH) ../os/$(ARCH_CLASS) ../os/generic ..
+vpath %.cc $(USER_VPATH) ../os/$(ARCH_CLASS) ../os/generic ..
+#	This prevents base/src/include/*.h from being installed. Why??
+#vpath %.h ../os/$(ARCH_CLASS) ../os/generic ..
+vpath %.h $(USER_VPATH)   
+
+#	check for add-on CFLAGS and CXXFLAGS
+#
+#	Rules:
+#	1) USR_CFLAGS is used
+#	2) if there is a special USR_CFLAGS_$(ARCH_CLASS), it's
+#	   appended to 1)
+#	3) if there is no special defined, but a generic USR_CFLAGS_DEFAULT,
+#	   this one is appended
+#	4) if you have the special case that your USR_CFLAGS_$(ARCH_CLASS) is
+#	   empty but you don't want 3), you have to define it as '-nil-', e.g.:
+#		USR_CFLAGS := <defines for all systems>
+#		USR_CFLAGS_sun4 := -nil-
+#		USR_CFLAGS_DEFAULT := <defines for most systems, not sun4>
+#
+#	These rules apply to these Makefile-variables:
+#	USR_CFLAGS	C flags
+#	USR_CXXFLAGS	C++ flags
+#	INC		include-files to install
+#	LIBSRCS		source files for building library
+#	PROD_LIBS	EPICS libs needed by PROD and TESTPROD
+#	SYS_PROD_LIBS	system libs needed by PROD and TESTPROD
+#	PROD		products to build and install
+#	SCRIPTS		scripts to install
+#
+#	Remark:
+#	If you define a special INC, e.g. INC_WIN32 := getopt.h,
+#	the source (getopt.h) has to be in os/WIN32 (or os/<your ARCH_CLASS>)
+#
+#	This makes INC_$(ARCH_CLASS) slightly different from OSINC:
+#	OSINC := a_file.h
+#	means that you have a special  os/$(ARCH_CLASS)/a_file.h
+#	for _every_ ARCH_CLASS.
+#	If you use INC_$(ARCH_CLASS), you need the special include
+#	only for the specified ARCH_CLASS!
+#
+ifneq (x$(USR_CFLAGS_$(ARCH_CLASS)),x)
+USR_CFLAGS+=$(subst -nil-,,$(USR_CFLAGS_$(ARCH_CLASS)))
+else
+ifdef USR_CFLAGS_DEFAULT
+USR_CFLAGS+=$(USR_CFLAGS_DEFAULT)
+endif
+endif
+
+ifneq (x$(USR_CXXFLAGS_$(ARCH_CLASS)),x)
+USR_CXXFLAGS+=$(subst -nil-,,$(USR_CXXFLAGS_$(ARCH_CLASS)))
+else
+ifdef USR_CXXFLAGS_DEFAULT
+USR_CXXFLAGS+=$(USR_CXXFLAGS_DEFAULT)
+endif
+endif
+
+#	check for special includes:
+#
+ifneq (x$(INC_$(ARCH_CLASS)),x)
+#	os-specific includes go to the include/os-directory:
+OSINC += $(subst -nil-,,$(INC_$(ARCH_CLASS)))
+else
+ifdef INC_DEFAULT
+INC += $(INC_DEFAULT)
+endif
+endif
+
+#	concat specific library contents (if defined) to LIBCONTENS
+#
+ifneq (x$(LIBSRCS_$(ARCH_CLASS)),x)
+LIBSRCS += $(subst -nil-,,$(LIBSRCS_$(ARCH_CLASS)))
+else
+
+ifdef LIBSRCS_DEFAULT
+LIBSRCS+=$(LIBSRCS_DEFAULT)
+endif
+
+endif
+
+#	adjust object names for library contents
+#
+ifdef LIBSRCS
+LIBOBJS=$(addsuffix $(OBJ), $(basename $(LIBSRCS)))
+endif
+
+#
+#	concat specific library contents (if defined) to PROD_LIBS
+#
+ifneq (x$(PROD_LIBS_$(ARCH_CLASS)),x)
+PROD_LIBS += $(subst -nil-,,$(PROD_LIBS_$(ARCH_CLASS)))
+
+else
+
+ifdef PROD_LIBS_DEFAULT
+PROD_LIBS += $(PROD_LIBS_DEFAULT)
+endif
+
+endif
+
+#
+#	concat specific library contents (if defined) to SYS_PROD_LIBS
+#
+ifneq (x$(SYS_PROD_LIBS_$(ARCH_CLASS)),x)
+SYS_PROD_LIBS += $(subst -nil-,,$(SYS_PROD_LIBS_$(ARCH_CLASS)))
+
+else
+
+ifdef SYS_PROD_LIBS_DEFAULT
+SYS_PROD_LIBS += $(SYS_PROD_LIBS_DEFAULT)
+endif
+
+endif
+
+#
+#	concat specific products
+#
+ifneq (x$(PROD_$(ARCH_CLASS)),x)
+PROD += $(subst -nil-,,$(PROD_$(ARCH_CLASS)))
+
+else
+
+ifdef PROD_DEFAULT
+PROD += $(PROD_DEFAULT)
+endif
+
+endif
+
+#
+#	concat specific scripts
+#
+ifneq (x$(SCRIPTS_$(ARCH_CLASS)),x)
+SCRIPTS += $(subst -nil-,,$(SCRIPTS_$(ARCH_CLASS)))
+
+else
+
+ifdef SCRIPTS_DEFAULT
+SCRIPTS += $(SCRIPTS_DEFAULT)
+endif
+
+endif
+
+# -------------------------------------------------------------------
+#	adjust names to platform specific pre-/postfixes,
+#	this is ugly (ifdef XXX...) but hopefully get's you there...
+# -------------------------------------------------------------------
+
+#	adjust names of libraries to build
+#
+#	But: if there are no objects LIBOBJS to include
+#	in this library (may be for e.g. base/src/libCompat
+#	on some archs), don't define (and build) any library!
+ifdef LIBRARY
+ifdef LIBOBJS
+
+ifndef WIN32
+#	handle plain Unix first because it's easy: <lib> ->  lib<lib>.a
+LIBNAME:=$(LIBRARY:%=lib%.a)
+
+else
+#	WIN32 library name:
+LIBNAME:=$(LIBRARY).lib
+#	check if DLL or plain lib requested:
+ifeq ($(LIBTYPE),SHARED)
+#	create name for dll, import file
+DLLNAME:=$(LIBRARY).dll
+#	libs defined that we need to link the DLL with?
+DLL_DEP_LIBS:=$(DLL_LIBS:%=%.lib)
+endif # LIBTYPE=SHARED
+endif # WIN32
+
+endif
+endif # LIBRARY and LIBOBJS
+
+#	dito for libraries used by PROD
+#
+ifdef PROD_LIBS
+#	add to USR_LDLIBS so that the libs are linked
+
+ifdef WIN32
+PRODDEPLIBS:=$(PROD_LIBS:%=$(INSTALL_LIB)/%.lib)
+USR_LDLIBS += -libpath:$(INSTALL_LIB) $(PROD_LIBS:%=%.lib)
+else
+#	On Unix: library "ca" is linked with "-lca"  etc.
+PRODDEPLIBS=$(PROD_LIBS:%=$(INSTALL_LIB)/lib%.a)
+USR_LDLIBS += -L$(INSTALL_LIB) $(PROD_LIBS:%=-l%) 
+endif
+
+endif
+
+
+#	dito for system libraries used by PROD
+#
+ifdef SYS_PROD_LIBS
+
+ifdef WIN32
+#	add to USR_LDLIBS so that the libs are linked
+#	we need the full path because there is no "-L" option on WIN32....
+USR_LDLIBS += $(SYSPRODDEPLIBS)
+else
+#	On Unix: it is difficult to determine where the
+# 	system lib is (because of add on compilere).
+#	Therefore no additions to PRODDEPLIBS for
+#	system libraries.
+#
+USR_LDLIBS += $(SYS_PROD_LIBS:%=-l%) 
+endif
+
+endif
+
+#	adjust executables
+ifdef PROD
+PROD := $(addsuffix $(EXE), $(PROD))
+endif
+
+ifdef TESTPROD
+TESTPROD := $(addsuffix $(EXE), $(TESTPROD))
+endif
+
+#	----------------------------------------------------
+#	create names (lists) for installed things
+#	----------------------------------------------------
+
+#	each list starts with the destination directory name(s)
+#	to make sure it's there
+
+INSTALL_PROD= $(PROD:%= $(INSTALL_BIN)/%)
+
+#	DLLs (only defined on WIN32) are like executables:
+ifdef DLLNAME
+INSTALL_DLLS=$(DLLNAME:%=$(INSTALL_BIN)/%)
+endif
+
+INSTALL_LIBS= $(LIBNAME:%=$(INSTALL_LIB)/%)
+INSTALL_INC= $(INC:%=$(INSTALL_INCLUDE)/%)
+INSTALL_OSINCLUDE=$(INSTALL_INCLUDE)/os/$(ARCH_CLASS)
+INSTALL_OSINC= $(OSINC:%= $(INSTALL_OSINCLUDE)/%)
+MANLIST = 1 2 3 4 5 6 7 8 9
+INSTALL_MANS = $(foreach n, \
+        $(MANLIST),$(INSTALL_MAN)/man$(n) $(MAN$(n):%= $(INSTALL_MAN)/man$(n)/%))
+INSTALL_DOCS = $(DOCS:%= $(INSTALL_DOC)/%)
+INSTALL_SCRIPTS = $(SCRIPTS:%= $(INSTALL_BIN)/%)
+ifdef TEMPLATES_DIR
+INSTALL_TEMPLATES_SUBDIR = $(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)
+else
+INSTALL_TEMPLATES_SUBDIR = $(INSTALL_TEMPLATES)
+endif
+INSTALL_TEMPLATE = $(TEMPLATES:%= $(INSTALL_TEMPLATES_SUBDIR)/%)
+INSTALL_CONFIGS = $(CONFIGS:%= $(INSTALL_CONFIG)/%)
+
+MAN_DIRECTORY_TARGETS = $(foreach n, $(MANLIST),$(INSTALL_MAN)/man$(n))
+
+DIRECTORY_TARGETS = $(INSTALL_INCLUDE) $(INSTALL_INCLUDE)/os \
+	$(INSTALL_OSINCLUDE) $(INSTALL_DOC) \
+	$(INSTALL_LOCATION_BIN) $(INSTALL_BIN) $(INSTALL_LIB) \
+	$(INSTALL_LOCATION_LIB) $(INSTALL_CONFIG) \
+	$(MAN_DIRECTORY_TARGETS) $(INSTALL_MAN) \
+	$(INSTALL_TEMPLATES) 
+
+ifdef TEMPLATES_DIR
+DIRECTORY_TARGETS += $(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)
+endif
+
+
+#	Main target
+#
+all::	install
+
+build:: $(LIBNAME) $(DLLNAME) \
+	$(INSTALL_LOCATION_LIB) $(INSTALL_LIB)\
+	$(INSTALL_LIBS) $(INSTALL_DLLS) $(PROD) $(TESTPROD)
+
+
+inc:: $(INSTALL_INCLUDE) $(INSTALL_INC) \
+	$(INSTALL_INCLUDE)/os $(INSTALL_OSINCLUDE) $(INSTALL_OSINC)
+
+rebuild:: clean install
+
+install:: inc buildInstall 
+
+buildInstall :: build $(TARGETS) $(INSTALL_LOCATION_BIN) \
+	$(INSTALL_BIN) $(INSTALL_SCRIPTS) $(INSTALL_PROD) \
+	$(INSTALL_MAN) $(INSTALL_MANS) \
+	$(INSTALL_DOC) $(INSTALL_DOCS) \
+	$(INSTALL_TEMPLATES) $(INSTALL_TEMPLATES_SUBDIR) $(INSTALL_TEMPLATE) \
+	$(INSTALL_CONFIG) $(INSTALL_CONFIGS) 
+
+depends:: $(LIBSRCS) $(SRCS)
+	$(RM) .DEPENDS
+	touch .DEPENDS
+ifdef $(SRCS.c)
+	$(DEPENDS_RULE.c)
+endif
+ifdef $(SRCS.cc)
+	$(DEPENDS_RULE.cc)
+endif
+
+
+clean::
+	@echo "Cleaning"
+	@$(RM) *.i *$(OBJ) *.a $(PROD) $(TESTPROD) $(LIBNAME) $(INC)
+
+$(DIRECTORY_TARGETS) :
+	$(MKDIR) $@
+
+#  The order of the following dependencies is
+#  VERY IMPORTANT !!!!
+
+#	If you want to break this on WIN32, please forget
+#	that $(COMPILE.cc) is like $(COMPILE.c) for WIN32
+#	except the first one ends in -Tp to select 'C++'.
+#
+#	EPICS uses .cc for C++, which is not recognized
+#	by MS Visual C++, so -Tp has to be directly in front of
+#	the source file.
+#	-> put the source file directly after $(COMPILE.cc),
+
+#	explicit list of source files given for PROD ?
+#	(otherwise implicit rules  .c -> $(EXE), .cc -> $(EXE)
+ifdef SRCS
+
+ifeq ($(findstring cc,$(suffix $(SRCS))),cc)
+PROD_LINKER = $(LINK.cc)
+else
+PROD_LINKER = $(LINK.c)
+endif
+
+PROD_OBJS=$(addsuffix $(OBJ), $(basename $(SRCS)))
+
+$(PROD): $(PROD_OBJS) $(PRODDEPLIBS)
+	@$(RM) $@
+	$(PROD_LINKER) $(PROD_OBJS) $(LDLIBS)
+endif 
+
+#	explicit list of source files given for TESTPROD ?
+#	(otherwise implicit rule  .c -> $(OBJ) -> $(EXE)
+ifdef TESTPROD_SRCS
+
+ifeq ($(findstring cc,$(suffix $(TESTPROD_SRCS))),cc)
+TESTPROD_LINKER = $(LINK.cc)
+else
+TESTPROD_LINKER = $(LINK.c)
+endif
+
+TESTPROD_OBJS=$(addsuffix $(OBJ), $(basename $(TESTPROD_SRCS)))
+
+$(TESTPROD): $(TESTPROD_OBJS) $(PRODDEPLIBS)
+	@$(RM) $@
+	$(TESTPROD_LINKER) $(TESTPROD_OBJS) $(LDLIBS)
+endif
+
+#	Generic Rules for 'simple' targets that
+#	can be generated from a single source with same basename.
+#
+#	The usual two rules .c* -> $(OBJ) and then  $(OBJ) -> $(EXE)
+#	do not work because the $(OBJ)->$(EXE) rule wouldn't
+#	know if the original source was C or C++.
+#
+#	Hint: The $(subst...) construct removes the .c or .cc
+#	      as well as the '../' from the filename and adds $(OBJ):
+#	      e.g.  $< = '../abc.c'   ->  'abc.o'
+%$(EXE): %.c $(PRODDEPLIBS)
+	@$(RM) $@
+	$(COMPILE.c)  $<
+	$(LINK.c)  $(subst ../,,$(basename $<))$(OBJ) $(LDLIBS)
+
+%$(EXE): %.cc $(PRODDEPLIBS)
+	@$(RM) $@
+	$(COMPILE.cc)  $<
+	$(LINK.cc) $(subst ../,,$(basename $<))$(OBJ) $(LDLIBS)
+
+%$(OBJ): %.c
+	@$(RM) $@
+	$(COMPILE.c)  $<
+
+%$(OBJ): %.cc
+	@$(RM) $@
+	$(COMPILE.cc)  $<
+
+%.c %.h: ../%.y
+	@$(RM) y.tab.c y.tab.h
+	$(YACC) $(YACCOPT) $<
+	@if [ -f y.tab.c ]; \
+		then \
+			echo "$(MV) y.tab.c $*.c"; \
+			$(RM) $*.c; \
+			$(MV) y.tab.c $*.c; \
+	fi
+	@if [ -f y.tab.h ]; \
+		then \
+			echo "$(MV) y.tab.h $*.h"; \
+			$(RM) $*.h; \
+			$(MV) y.tab.h $*.h; \
+	fi
+
+%.c: ../%.l
+	@$(RM) lex.yy.c
+	$(LEX) $(LEXOPT) $<
+	@$(RM) $@
+	$(MV) lex.yy.c $@
+
+#state notation language rule
+%.c: ../%.st
+	@echo "preprocessing $*.st"
+	@$(RM) $*.i
+	$(CPP) $(CPPFLAGS) $< $*.i
+	@echo "converting $*.i"
+	@$(RM) $@
+	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
+
+%.c:	%.stt
+	@echo "converting $<"
+	@$(RM) $@
+	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $<
+	
+# Capfast Rules:
+%.db: %.edf
+	$(E2DB) $(E2SR_SYSFLAGS) $(E2SR_FLAGS) $<
+
+%.db: ../%.edf
+	$(E2DB) $(E2SR_SYSFLAGS) $(E2SR_FLAGS) $<
+
+%.edf: ../%.sch $(DEPSCHS)
+	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
+	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) $<
+
+# Mangen Rule:
+%.1:%
+	$(RM) $(<F)
+	$(RM) $(<F).nr
+	ln -s $<
+	$(MANGEN) -s $(<F)
+	$(MV) $(<F).nr $(<F).1
+
+# Mangen Rule:
+%.1:../%
+	$(RM) $(<F)
+	$(RM) $(<F).nr
+	ln -s $<
+	$(MANGEN) -s $(<F)
+	$(MV) $(<F).nr $(<F).1
+
+#	Rules for building LIBRARY with LIBSRCS
+#	(which are now LIBNAME, LIBOBJS)
+#
+ifdef WIN32
+
+ifeq ($(LIBTYPE),SHARED)
+#	A WIN32 dll has tree parts:
+#	x.dll: the real dll (DLLNAME)
+#	x.lib: what you link to progs that use the dll (LIBNAME)
+#	x.exp: what you need to build the dll (in no variable)
+#
+#	the latter two are created automatically when building the dll:
+$(LIBNAME):	$(DLLNAME)
+
+#	test if there is a def file for this dll:
+#
+DLL_DEF_FILE := ../$(LIBRARY).def
+
+ifeq ($(DLL_DEF_FILE), $(wildcard $(DLL_DEF_FILE)))
+DLL_DEF := -def:$(DLL_DEF_FILE)
+endif
+
+#	HOST_OPT_FLAGS is part of CFLAGS/CXXFLAGS,
+#	which in turn are used in COMPILE.c[c]
+#
+#	If we compile a .c, .cc into an $(OBJ),
+#	we test if this object is part of the 
+#	library objects LIBOBJS.
+#	If so, we define _WINDLL so that
+#	e.g. include/shareLib.h works correctly.
+#
+HOST_OPT_FLAGS += $(subst $@, -D_WINDLL, $(findstring $@,$(LIBOBJS)))
+
+$(DLLNAME): $(LIBOBJS)
+	link $(WIN32_DLLFLAGS)\
+		-implib:$(LIBNAME) -out:$(DLLNAME) $(DLL_DEF)\
+		$(DLL_DEP_LIBS) $(ARCH_DEP_LDLIBS) $(HOST_LDLIBS) $(LIBOBJS)
+else
+#	still on WIN32, this time no DLL but plain lib requested:
+$(LIBNAME):	$(LIBOBJS)
+	lib -nologo -verbose -out:$(LIBNAME) $(LIBOBJS)
+	lib -nologo -list $(LIBNAME)
+
+endif # LIBTYPE is SHARED ?
+
+else  # not WIN32
+
+#	usual Unix rule for lib creation
+$(LIBNAME): $(LIBOBJS)
+	$(RM) $@
+	$(ARCMD) $@ $(LIBOBJS)
+	@if [ ! -z "$(RANLIB)" ] ; then\
+		echo $(RANLIB) $@; \
+		$(RANLIB) $@; \
+	fi
+endif # ifdef WIN32
+# end of library creation rules
+
+
+$(INSTALL_BIN)/%: ../os/$(ARCH_CLASS)/%
+	@echo "Installing os-specific script $@"
+	@$(INSTALL_PRODUCT) -m 555 $< $(INSTALL_BIN)
+
+$(INSTALL_BIN)/%: %
+	@echo "Installing binary $@"
+	@$(INSTALL_PRODUCT) -m 555 $< $(INSTALL_BIN)
+
+$(INSTALL_BIN)/%: ../%
+	@echo "Installing script $@"
+	@$(INSTALL_PRODUCT) -m 555 $< $(INSTALL_BIN)
+
+$(INSTALL_LIB)/%.a: %.a
+	@echo "Installing library $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_LIB)
+	@if [ ! -z "$(RANLIB)" ] ; then\
+		$(RANLIB) $(RANLIBFLAGS) $@; \
+	fi
+
+$(INSTALL_LIB)/%.lib: %.lib
+	@echo "Installing library $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_LIB)
+
+$(INSTALL_CONFIG)/%: %
+	@echo "Installing config file $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_CONFIG)
+
+$(INSTALL_CONFIG)/%: ../%
+	@echo "Installing config file $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_CONFIG)
+
+$(addsuffix /%,$(MAN_DIRECTORY_TARGETS)) : % 
+	@echo "Installing man file $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(addsuffix /%,$(MAN_DIRECTORY_TARGETS)) : ../% 
+	@echo "Installing man file $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(INSTALL_INCLUDE)/%: %
+	@echo "Installing include file $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(INSTALL_INCLUDE)/%: ../%
+	@echo "Installing include file $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(INSTALL_DOC)/%: %
+	@echo "Installing doc $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_DOC)
+
+$(INSTALL_DOC)/%: ../%
+	@echo "Installing doc $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_DOC)
+
+$(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)/%: ../%
+	@echo "Installing $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)
+
+$(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)/%: %
+	@echo "Installing $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)
+
+.PRECIOUS: %.o %.c
+
+-include .DEPENDS
+
+.PHONY:: all inc depends build install clean rebuild buildInstall
+
+#	EOF RULES.Host

config/RULES.Unix

@@ -0,0 +1,227 @@
+# $Id$
+
+INSTALL_PROD = $(PROD:%= $(INSTALL_BIN)/%)
+INSTALL_LIBS = $(LIBNAME:%= $(INSTALL_LIB)/%)
+INSTALL_INC = $(INC:%= $(INSTALL_INCLUDE)/%)
+INSTALL_OSINCLUDE = $(INSTALL_INCLUDE)/os/$(T_A)
+INSTALL_OSINC = $(OSINC:%= $(INSTALL_OSINCLUDE)/%)
+MANLIST = 1 2 3 4 5 6 7 8 9
+INSTALL_MANS = $(foreach n, \
+        $(MANLIST),$(INSTALL_MAN)/man$(n) $(MAN$(n):%= $(INSTALL_MAN)/man$(n)/%))
+INSTALL_DOCS = $(DOCS:%= $(INSTALL_DOC)/%)
+INSTALL_SCRIPTS = $(SCRIPTS:%= $(INSTALL_BIN)/%)
+INSTALL_TEMPLATES_SUBDIR = $(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)
+INSTALL_TEMPLATE = $(TEMPLATES:%= $(INSTALL_TEMPLATES_SUBDIR)/%)
+INSTALL_CONFIGS = $(CONFIGS:%= $(INSTALL_CONFIG)/%)
+
+MAN_DIRECTORY_TARGETS = $(foreach n, $(MANLIST),$(INSTALL_MAN)/man$(n))
+
+DIRECTORY_TARGETS = $(INSTALL_INCLUDE) $(INSTALL_INCLUDE)/os \
+	$(INSTALL_OSINCLUDE) $(INSTALL_DOC) \
+	$(INSTALL_TEMPLATES)/$(TEMPLATES_DIR) $(INSTALL_TEMPLATES) \
+	$(INSTALL_LOCATION_BIN) $(INSTALL_BIN) $(INSTALL_LIB) \
+	$(INSTALL_LOCATION_LIB) $(INSTALL_CONFIG) \
+	$(MAN_DIRECTORY_TARGETS) $(INSTALL_MAN)
+
+all:: install
+
+pre_build::
+
+rebuild:: clean install
+
+build:: pre_build $(LIBNAME) $(TARGETS) $(PROD)
+
+inc:: $(INSTALL_INCLUDE) $(INSTALL_INC) $(INSTALL_INCLUDE)/os \
+	$(INSTALL_OSINCLUDE) $(INSTALL_OSINC)
+
+install:: inc buildInstall 
+
+buildInstall :: build \
+	$(INSTALL_LOCATION_LIB) $(INSTALL_LIB) $(INSTALL_LIBS) \
+	$(TARGETS) \
+	$(INSTALL_LOCATION_BIN) $(INSTALL_BIN) \
+		$(INSTALL_SCRIPTS) $(INSTALL_PROD) \
+	$(INSTALL_MAN) $(INSTALL_MANS) \
+	$(INSTALL_DOC) $(INSTALL_DOCS) $(INSTALL_TEMPLATES) \
+	$(INSTALL_TEMPLATES)/$(TEMPLATES_DIR) $(INSTALL_TEMPLATE) \
+	$(INSTALL_CONFIG) $(INSTALL_CONFIGS) 
+
+depends:: $(SRCS.c) $(SRCS.cc)
+ifdef SRCS
+	echo you have a SRCS in your Makefile
+	exit 2
+endif
+ifdef SRCS.c
+	$(DEPENDS_RULE.c)
+endif
+ifdef SRCS.cc
+	$(DEPENDS_RULE.cc)
+endif
+
+clean::
+	@echo "Cleaning"
+	@$(RM) *.i *.o *.a $(TARGETS) $(PROD) $(LIBNAME) $(INC)
+
+$(DIRECTORY_TARGETS) :
+	@$(MKDIR) $@
+
+$(TARGETS) $(PROD): $(DEPLIBS)
+
+#  The order of the following dependencies is
+#  VERY IMPORTANT !!!!
+
+%: %.o
+	$(RM) $@
+	$(LINK.c) -o $@ $< $(LDLIBS)
+
+#$(PROD): $(OBJS)
+#	$(RM) $@
+#	$(LINK.c) -o $@ ${OBJS} $(LDLIBS)
+
+%.o: %.c
+	$(RM) $@
+	$(COMPILE.c) $<
+
+%.o: ../%.c
+	$(RM) $@
+	$(COMPILE.c) $<
+
+%.o: %.cc
+	$(RM) $@
+	$(COMPILE.cc) $<
+
+%.o: ../%.cc
+	$(RM) $@
+	$(COMPILE.cc) $<
+
+%.c: ../%.y
+	$(RM) y.tab.c y.tab.h
+	$(YACC) $(YACCOPT) $<
+	@if [ -f y.tab.c ]; \
+		then \
+			echo "$(MV) y.tab.c $*.c"; \
+			$(MV) y.tab.c $*.c; \
+	fi
+	@if [ -f y.tab.h ]; \
+		then \
+			echo "$(MV) y.tab.h $*.h"; \
+			$(MV) y.tab.h $*.h; \
+	fi
+
+%.c: ../%.l
+	$(RM) lex.yy.c
+	$(LEX) $(LEXOPT) $<
+	$(RM) $@
+	$(MV) lex.yy.c $@
+
+#state notation language rule
+%.c: ../%.st
+	@echo "preprocessing $*.st"
+	@$(RM) $*.i
+	$(CPP) $(CPPFLAGS) $< $*.i
+	@echo "converting $*.i"
+	@$(RM) $@
+	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
+
+%.c: %.stt
+	@echo "converting $<
+	@$(RM) $@
+	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $<
+
+# Capfast Rules:
+%.db: %.edf
+	$(E2DB) $(E2SR_SYSFLAGS) $(E2SR_FLAGS) $<
+
+%.db: ../%.edf
+	$(E2DB) $(E2SR_SYSFLAGS) $(E2SR_FLAGS) $<
+
+%.edf: ../%.sch $(DEPSCHS)
+	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
+	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) $<
+
+# Mangen Rule:
+%.1:%
+	$(RM) $(<F)
+	$(RM) $(<F).nr
+	ln -s $<
+	$(MANGEN) -s $(<F)
+	$(MV) $(<F).nr $(<F).1
+
+# Mangen Rule:
+%.1:../%
+	$(RM) $(<F)
+	$(RM) $(<F).nr
+	ln -s $<
+	$(MANGEN) -s $(<F)
+	$(MV) $(<F).nr $(<F).1
+
+$(LIBNAME): $(LIBOBJS)
+	@echo Building library $@
+	$(RM) $@
+	$(ARCMD) $@ $(LIBOBJS)
+	@if [ ! -z "$(RANLIB)" ] ; then\
+		echo $(RANLIB) $@; \
+		$(RANLIB) $@; \
+	fi
+
+$(INSTALL_BIN)/%: % 
+	@echo "Installing Binary $@"
+	@$(INSTALL_PRODUCT) -m 555 $< $(INSTALL_BIN)
+
+$(INSTALL_BIN)/%: ../% 
+	@echo "Installing Binary $@"
+	@$(INSTALL_PRODUCT) -m 555 $< $(INSTALL_BIN)
+
+$(INSTALL_LIB)/%.a: %.a 
+	@echo "Installing library $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_LIB)
+	@if [ ! -z "$(RANLIB)" ] ; then\
+		$(RANLIB) $(RANLIBFLAGS) $@; \
+	fi
+
+$(INSTALL_CONFIG)/%: % 
+	@echo "Installing Config File $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_CONFIG)
+
+$(INSTALL_CONFIG)/%: ../% 
+	@echo "Installing Config File $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_CONFIG)
+
+$(addsuffix /%,$(MAN_DIRECTORY_TARGETS)) : % 
+	@echo "Installing man file $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(addsuffix /%,$(MAN_DIRECTORY_TARGETS)) : ../% 
+	@echo "Installing man file $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(INSTALL_INCLUDE)/%: % 
+	@echo "Installing Include File $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(INSTALL_INCLUDE)/%: ../% 
+	@echo "Installing Include File $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(INSTALL_DOC)/%: % 
+	@echo "Installing doc $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_DOC)
+
+$(INSTALL_DOC)/%: ../% 
+	@echo "Installing doc $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_DOC)
+
+$(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)/%: ../% 
+	@echo "Installing template $@"
+	@$(INSTALL) -d -m 644 $< $(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)
+
+$(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)/%: % 
+	@echo "Installing template $@"
+	@$(INSTALL) -d -m 644 $< $(INSTALL_TEMPLATES)/$(TEMPLATES_DIR)
+
+.PRECIOUS: %.o %.c
+
+.PHONY:: all inc depends build install pre-build clean rebuild  
+
+-include .DEPENDS
+

config/RULES.Vx

@@ -0,0 +1,266 @@
+# $Id$
+
+INCREC +=$(RECTYPES) $(MENUS)
+INSTALL_PROD = $(PROD:%= $(INSTALL_BIN)/%)
+INSTALL_LIBS = $(LIBNAME:%= $(INSTALL_BIN)/%)
+INSTALL_LIBS_CXX = $(LIBNAME_CXX:%= $(INSTALL_BIN)/%)
+INSTALL_INC = $(INC:%= $(INSTALL_INCLUDE)/%)
+INSTALL_OSINCLUDE = $(INSTALL_INCLUDE)/os/vxWorks
+INSTALL_OSINC = $(OSINC:%= $(INSTALL_OSINCLUDE)/%)
+INSTALL_INCREC = $(INCREC:%= $(INSTALL_INCLUDE)/%)
+MANLIST = 1 2 3 4 5 6 7 8 9
+INSTALL_MANS = $(foreach n, \
+	$(MANLIST),$(INSTALL_MAN)/man$(n) $(MAN$(n):%= $(INSTALL_MAN)/man$(n)/%))
+INSTALL_DOCS = $(DOCS:%= $(INSTALL_DOC)/%)
+INSTALL_SCRIPTS = $(SCRIPTS:%= $(INSTALL_BIN)/%)
+INSTALL_INSTALLS = $(INSTALLS:%= $(INSTALL_BIN)/%)
+
+INSTALL_BPTS = $(BPTS:%= $(INSTALL_DBD)/%)
+INSTALL_DBS = $(DBDINSTALL:%= $(INSTALL_DBD)/%)\
+              $(RECTYPES:%.h= $(INSTALL_DBD)/%.dbd)\
+              $(MENUS:%.h= $(INSTALL_DBD)/%.dbd)
+
+INSTALL_DBDNAME = $(DBDNAME:%= $(INSTALL_DBD)/%)
+
+MAN_DIRECTORY_TARGETS = $(foreach n, $(MANLIST),$(INSTALL_MAN)/man$(n))
+
+DIRECTORY_TARGETS = $(INSTALL_INCLUDE) $(INSTALL_DOC) $(INSTALL_DBD) \
+	$(INSTALL_OSINCLUDE) $(INSTALL_INCLUDE)/os \
+	$(INSTALL_LOCATION_BIN) $(INSTALL_BIN) \
+	$(MAN_DIRECTORY_TARGETS) $(INSTALL_MAN)
+
+all:: install 
+
+rebuild:: clean install
+
+pre_build:: 
+
+build:: pre_build $(MENUS) $(RECTYPES) $(BPTS)\
+         $(LIBNAME) $(LIBNAME_CXX) $(TARGETS) $(PROD) $(DBDNAME)
+
+inc:: $(INSTALL_INCLUDE) $(INSTALL_INC) $(INSTALL_INCLUDE)/os \
+	$(INSTALL_OSINCLUDE) $(INSTALL_OSINC)
+
+install:: inc buildInstall 
+
+buildInstall :: build $(INSTALL_INCREC)\
+	 $(INSTALL_LOCATION_BIN) \
+         $(INSTALL_BIN) $(INSTALL_LIBS) $(INSTALL_LIBS_CXX) \
+	 $(TARGETS) $(INSTALL_PROD) \
+	 $(INSTALL_MAN) $(INSTALL_MANS)\
+         $(INSTALL_DOC) $(INSTALL_DOCS) \
+	 $(INSTALL_SCRIPTS) $(INSTALL_INSTALLS)\
+	 $(INSTALL_DBD) $(INSTALL_DBS) $(INSTALL_BPTS) \
+	 $(INSTALL_DBDNAME) 
+
+ifdef BIN_INSTALLS
+buildInstall :: binInstalls
+endif
+
+depends:: $(SRCS.c) $(SRCS.cc)
+ifdef SRCS
+	echo you have a SRCS in your Makefile
+	exit 2
+endif
+ifdef SRCS.c
+	$(DEPENDS_RULE.c)
+endif
+ifdef SRCS.cc
+	$(DEPENDS_RULE.cc)
+endif
+
+clean::
+	@echo "Cleaning"
+	@$(RM) *.i *.o *.a $(TARGETS) $(PROD) $(LIBNAME) $(INC) \
+	$(DBDINSTALL) $(MENUS) $(RECTYPES) $(BPTS) $(DBDNAME)
+
+$(DIRECTORY_TARGETS) :
+	@$(MKDIR) $@
+
+#  The order of the following dependencies is
+#  VERY IMPORTANT !!!!
+
+%: %.o
+	$(RM) $@
+	$(LINK.c) $@ $< $(LDLIBS)
+
+#$(PROD): $(OBJS)
+#	$(RM) $@
+#	$(LINK.c) $@ $(OBJS)
+
+%.o: %.c
+	$(RM) $@
+	$(COMPILE.c) $<
+
+%.o: ../%.c
+	$(RM) $@
+	$(COMPILE.c) $<
+
+%.o: %.cc
+	$(RM) $@
+	$(COMPILE.cc) $<
+
+%.o: ../%.cc
+	$(RM) $@
+	$(COMPILE.cc) $<
+
+%.c: ../%.y
+	$(RM) y.tab.c y.tab.h
+	$(YACC) $(YACCOPT) $<
+	@if [ -f y.tab.c ]; \
+		then \
+			echo "$(MV) y.tab.c $*.c"; \
+			$(MV) y.tab.c $*.c; \
+	fi
+	@if [ -f y.tab.h ]; \
+		then \
+			echo "$(MV) y.tab.h $*.h"; \
+			$(MV) y.tab.h $*.h; \
+	fi
+
+%.c: ../%.l
+	$(RM) lex.yy.c
+	$(LEX) $(LEXOPT) $<
+	$(RM) $@
+	$(MV) lex.yy.c $@
+
+#state notation language rules
+%.c: ../%.st
+	@echo "preprocessing $*.st"
+	@$(RM) $*.i
+	$(CPP) $(CPPFLAGS) $< $*.i
+	@echo "converting $*.i"
+	@$(RM) $@
+	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $*.i
+
+%.c: %.stt
+	@echo "converting $<
+	@$(RM) $@
+	$(SNC) $(TARGET_SNCFLAGS) $(SNCFLAGS) $<
+
+# Capfast Rules:
+%.db: %.edf
+	$(E2DB) $(E2SR_SYSFLAGS) $(E2SR_FLAGS) $<
+
+%.db: ../%.edf
+	$(E2DB) $(E2SR_SYSFLAGS) $(E2SR_FLAGS) $<
+
+%.edf: ../%.sch $(DEPSCHS)
+	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
+	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) $<
+
+# Mangen Rule:
+%.1:%
+	$(RM) $(<F)
+	$(RM) $(<F).nr
+	ln -s $<
+	$(MANGEN) -s $(<F)
+	$(MV) $(<F).nr $(<F).1
+
+binInstalls:  $(BIN_INSTALLS)
+	$(INSTALL) -m 555 $^ $(INSTALL_BIN)
+
+$(INSTALL_DBD)/%: % 
+	@echo "Installing $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_DBD)
+
+$(INSTALL_DBD)/%: ../% 
+	@echo "Installing $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_DBD)
+
+%Record.h: %Record.dbd
+	$(RM) $@
+	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH \
+		$(USER_DBDFLAGS)  $<
+
+%Record.h: ../%Record.dbd
+	$(RM) $@
+	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToRecordtypeH \
+		$(USER_DBDFLAGS)  $<
+
+menu%.h: menu%.dbd
+	$(RM) $@
+	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH $<
+
+menu%.h: ../menu%.dbd
+	$(RM) $@
+	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbToMenuH $<
+
+bpt%.dbd: bpt%.data
+	$(RM) $@
+	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt $<
+
+bpt%.dbd: ../bpt%.data
+	$(RM) $@
+	$(EPICS_BASE)/bin/$(HOST_ARCH)/makeBpt $<
+
+$(DBDNAME): ../$(DBDEXPAND)
+	@echo expanding dbd
+	@$(RM) $@
+	$(EPICS_BASE)/bin/$(HOST_ARCH)/dbExpand\
+		$(USER_DBDFLAGS) $< > $@
+
+$(LIBNAME): $(LIBOBJS)
+	@echo Building library $@
+	@$(RM) $@
+	$(LINK.c) $@ $(LIBOBJS) $(LDLIBS)
+
+$(LIBNAME_CXX): $(LIBOBJS_CXX)
+	@echo Building CXX library $@
+	@$(RM) $@
+	$(LINK.cc) $@ $(LIBOBJS_CXX) $(CXXLDLIBS)
+
+$(INSTALL_BIN)/%: % 
+	@echo "Installing $@"
+	@$(INSTALL) -m 555 $< $(INSTALL_BIN)
+
+$(INSTALL_BIN)/%: ../% 
+	@echo "Installing $@"
+	@$(INSTALL) -m 555 $< $(INSTALL_BIN)
+
+#
+# avoid confusing circular dependency message when
+# INSTALL_BIN and EPICS_BASE_BIN are the same (in base)
+#
+ifneq ($(INSTALL_BIN),$(EPICS_BASE_BIN))
+$(INSTALL_BIN)/%: $(EPICS_BASE_BIN)/% 
+	@echo "Installing $@"
+	@$(INSTALL) -m 555 $< $(INSTALL_BIN)
+endif
+
+$(addsuffix /%,$(MAN_DIRECTORY_TARGETS)) : % 
+	@echo "Installing $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(addsuffix /%,$(MAN_DIRECTORY_TARGETS)) : ../% 
+	@echo "Installing $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(INSTALL_INCLUDE)/%: % 
+	@echo "Installing $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(INSTALL_INCLUDE)/%: ../% 
+	@echo "Installing $@"
+	@$(INSTALL) -m 644 $< $(@D)
+
+$(INSTALL_DOC)/%: % 
+	@echo "Installing $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_DOC)
+
+$(INSTALL_DOC)/%: ../% 
+	@echo "Installing $@"
+	@$(INSTALL) -m 644 $< $(INSTALL_DOC)
+
+.PRECIOUS: %.o %.c
+
+.PHONY:: all inc depends build install pre_build clean rebuild buildInstall binInstalls
+
+-include .DEPENDS
+
+ifneq (,$(wildcard ../baseLIBOBJS))
+$(LIBNAME): ../baseLIBOBJS
+endif
+$(LIBNAME): ../Makefile.Vx
+$(DBDNAME): ../base.dbd $(RECTYPES:%.h=../%.dbd)
+

config/RULES.ioc

@@ -0,0 +1,56 @@
+#RULES.ioc
+
+ifndef WIN32
+APPDIR := $(shell grep '.*".*App/' st.* | sed -e 's/.*"\(.*App\).*/\1/' | sort -u )
+endif
+
+ASCF = $(TOP)/../ascf
+TARGETBIN = $(TOP)/bin/$(ARCH)
+ARCHS = $(BUILD_ARCHS) host cross
+ACTIONS += clean inc depends buildInstall build
+actionArchTargets = $(foreach action, $(ACTIONS) install,\
+                    $(foreach arch, $(ARCHS), \
+                    $(action)$(DIVIDER)$(arch)))
+ 
+all install :: inc buildInstall
+ 
+buildInstall: makelinks
+ 
+inc build depends:
+ 
+makelinks:
+ifndef WIN32
+	@$(RM) ascf bin vxWorks vxWorks.sym dbd share $(APPDIR)
+	ln -s $(ASCF) ascf
+	ln -s $(TARGETBIN) bin
+	ln -s $(TARGETBIN)/vxWorks vxWorks
+	ln -s $(TARGETBIN)/vxWorks.sym vxWorks.sym
+	ln -s $(TOP)/dbd dbd
+	ln -s $(SHARE) share
+	@for dir in $(APPDIR) scum ; do  \
+		if [ $$dir = scum ]; then \
+			: ; \
+		elif [ -d $(TOP)/$$dir ]; then \
+			ln -s $(TOP)/$$dir $$dir ; \
+			echo "ln -s $(TOP)/$$dir $$dir" ; \
+		elif [ -d $(MASTER_IOCAPPS)/$$dir ]; then \
+			ln -s $(MASTER_IOCAPPS)/$$dir $$dir ; \
+			echo "ln -s $(MASTER_IOCAPPS)/$$dir $$dir" ; \
+		else \
+			echo "$$dir not found" ; \
+		fi ; \
+	done
+endif
+ 
+clean::
+	@$(RM) ascf bin vxWorks vxWorks.sym dbd share $(APPDIR)
+
+$(actionArchTargets) :%: 
+	$(MAKE) $(word 1, $(subst $(DIVIDER), ,$@))
+ 
+$(ARCHS):%: install
+
+.PHONY :: $(ARCHS) $(ACTIONS)
+.PHONY :: $(actionArchTargets)
+
+

config/RULES_ARCHS

@@ -0,0 +1,90 @@
+#
+# $Id$
+#
+#  EPICS RULES_ARCH
+#       by Matthew Needes and Mike Bordua and Janet Andersoni and Jeff Hill
+#
+
+all:: install
+
+ACTIONS += inc
+ACTIONS += build
+ACTIONS += install
+ACTIONS += buildInstall 
+ACTIONS += depends 
+ACTIONS += rebuild 
+
+actionPart = $(word 1, $(subst $(DIVIDER), ,$@))
+archPart = $(word 2, $(subst $(DIVIDER), ,$@))
+
+#
+# hostActionArchTargets
+#
+hostArchs = $(HOST_ARCH)
+hostActionArchTargets = $(foreach x, $(ACTIONS),\
+		$(foreach arch,$(hostArchs), $(x)$(DIVIDER)$(arch)))
+ifeq (Makefile.$(BUILD_TYPE), $(wildcard Makefile.$(BUILD_TYPE)))
+hostDirs = $(addprefix O.,$(hostArchs))
+$(hostActionArchTargets) : $(hostDirs)
+	$(MAKE) -C O.$(archPart) -f ../Makefile.$(BUILD_TYPE) T_A=$(archPart) $(actionPart)
+$(hostArchs) : % : O.% 
+	$(MAKE) -C O.$@ -f ../Makefile.$(BUILD_TYPE) T_A=$@ 
+else
+$(hostActionArchTargets) :
+$(hostArchs) :
+endif
+
+#
+# crossActionArchTargets
+#
+crossArchs = $(filter-out $(hostArchs),$(BUILD_ARCHS))
+crossActionArchTargets = $(foreach x, $(ACTIONS), \
+	$(foreach arch, $(CROSS_COMPILER_TARGET_ARCHS), $(x)$(DIVIDER)$(arch)))
+ifeq (Makefile.Vx, $(wildcard Makefile.Vx))
+crossDirs = $(addprefix O.,$(crossArchs))
+$(crossActionArchTargets) : $(crossDirs)
+	$(MAKE) -C O.$(archPart) -f ../Makefile.Vx T_A=$(archPart) $(actionPart)
+$(crossArchs) : % : O.%
+	$(MAKE) -C O.$@ -f ../Makefile.Vx T_A=$@
+else
+$(crossActionArchTargets) :
+$(crossArchs) : 
+endif
+
+$(hostDirs) : 
+	$(PERL) $(EPICS_BASE)/config/makeMakefile.pl $@ $(BUILD_TYPE)
+
+$(crossDirs) : 
+	$(PERL) $(EPICS_BASE)/config/makeMakefile.pl $@ Vx
+
+#
+# host/cross action targets
+#
+$(ACTIONS) : % : %$(DIVIDER)host %$(DIVIDER)cross 
+HostActionTargets = $(foreach x, $(ACTIONS) clean, $(x)$(DIVIDER)host)
+CrossActionTargets = $(foreach x, $(ACTIONS) clean, $(x)$(DIVIDER)cross)
+$(HostActionTargets) : %$(DIVIDER)host : $(addprefix %$(DIVIDER), $(hostArchs))
+$(CrossActionTargets) : %$(DIVIDER)cross : $(addprefix %$(DIVIDER), $(crossArchs))
+
+
+#
+# arch targets
+#
+host : $(hostArchs)
+cross : $(crossArchs)
+
+#
+# special clean rule
+#
+clean :
+	$(RMDIR) $(hostDirs) $(crossDirs)
+clean$(DIVIDER)% : 
+	$(RMDIR) O.$*
+
+.PHONY :: $(HostActionTargets)
+.PHONY :: $(CrossActionTargets)
+.PHONY :: $(crossActionArchTargets)
+.PHONY :: $(hostActionArchTargets)
+.PHONY :: $(hostArchs) $(crossArchs)
+.PHONY :: $(ACTIONS) clean all host cross
+

config/RULES_DIRS

@@ -0,0 +1,46 @@
+#
+#  $Id$
+#
+ 
+
+ARCHS += $(BUILD_ARCHS) host cross
+ACTIONS += clean inc depends buildInstall
+ 
+dirPart = $(word 1, $(subst $(DIVIDER), ,$@))
+actionArchPart = $(subst $(dirPart)$(DIVIDER), ,$@)
+ 
+dirActionArchTargets = $(foreach dir, $(DIRS), \
+                       $(foreach action, $(ACTIONS) install,\
+                       $(foreach arch, $(ARCHS), \
+                       $(dir)$(DIVIDER)$(action)$(DIVIDER)$(arch))))
+dirArchTargets += $(foreach dir, $(DIRS), \
+                  $(foreach arch, $(ARCHS),\
+                  $(dir)$(DIVIDER)$(arch)))
+dirActionTargets += $(foreach dir, $(DIRS), \
+                    $(foreach action, $(ACTIONS) install,\
+                    $(dir)$(DIVIDER)$(action)))
+actionArchTargets = $(foreach action, $(ACTIONS) install,\
+                    $(foreach arch, $(ARCHS), \
+                    $(action)$(DIVIDER)$(arch)))
+
+all install :: inc buildInstall 
+
+rebuild:: clean all
+
+$(DIRS) $(dirActionTargets) $(dirArchTargets)$(dirActionArchTargets) ::
+	$(MAKE) -C $(dirPart) $(actionArchPart)
+
+$(ARCHS) $(installArchTargets) :%: \
+	$(foreach dir, $(DIRS), $(dir)$(DIVIDER)inc) \
+	$(foreach dir, $(DIRS), $(dir)$(DIVIDER)%)
+
+$(ACTIONS) $(actionArchTargets) :%: \
+	$(foreach dir, $(DIRS), $(dir)$(DIVIDER)%)
+ 
+
+.PHONY :: $(DIRS) all install rebuild
+.PHONY :: $(ARCHS) $(ACTIONS)
+.PHONY :: $(dirActionTargets) $(dirArchTargets)
+.PHONY :: $(dirActionArchTargets)
+.PHONY :: $(actionArchTargets)
+

config/RULES_TOP

@@ -0,0 +1,51 @@
+#
+#  $Id$
+#
+
+include $(TOP)/config/RULES_DIRS
+
+uninstall$(DIVIDER)%::
+	@$(RMDIR) $(INSTALL_LOCATION_BIN)/$* $(INSTALL_LOCATION_LIB)/$* \
+		$(INSTALL_LOCATION)/dbd $(INSTALL_MAN) $(INSTALL_INCLUDE) \
+		$(INSTALL_DOC) $(INSTALL_DBD) $(INSTALL_TEMPLATES)
+	@$(RMDIR)  rec.bak rec
+
+uninstall:: $(addprefix uninstall$(DIVIDER),$(BUILD_ARCHS))
+
+tar:
+	@DIRNAME=$(notdir $(shell pwd)); \
+	echo "TOP: Creating $$DIRNAME.Tar file..."; \
+	ls Makefile* | xargs tar vcf $$DIRNAME.Tar; \
+	if [ -f .current_rel_hist ]; then \
+		ls .current_rel_hist | xargs tar vrf $$DIRNAME.Tar ; \
+	fi ;\
+	if [ -f EPICS_BASE ]; then \
+		ls EPICS_BASE | xargs tar vrf $$DIRNAME.Tar ; \
+	fi ;\
+	for DIR in ${DIRS}; do    \
+		find $${DIR} -name CVS -prune -o ! -type d -print \
+		| grep -v "/O\..*$$" | xargs tar vrf $$DIRNAME.Tar; \
+	done
+
+help:
+	@echo "Usage: gnumake [options] [target] ..."
+	@echo "Targets supported by all Makefiles:"
+	@echo "     install		- Installs executables in bin/<arch> (default rule)"
+	@echo "     build		- Builds objects, using libraries from "build_libs"
+	@echo "     clean		- Cleans objects.  Clean removes the" O.<arch> dirs
+	@echo "                   in all except the O.<arch> level Makefile"
+	@echo "     depends		- Generates include dependencies"
+	@echo "\"Partial\" build targets supported by Makefiles:"
+	@echo "     install.<arch> - Builds and installs <arch> only.
+	@echo "     clean.<arch>   - Cleans <arch> binaries in O.<arch> dirs only."
+	@echo "     build.<arch>   - Builds <arch> only.
+	@echo "     depends.<arch> - Generates <arch> dependencies only.
+	@echo "Targets supported by top level Makefile:"
+	@echo "     uninstall   - Cleans directories created by the install."
+	@echo "     tar         - Create tar file "
+	@echo "Indiv. object targets are supported by O.<arch> level Makefile .e.g"
+	@echo "     xxxRecord.o 
+
+.PHONY :: uninstall tar help
+.PHONY :: $(addprefix uninstall$(DIVIDER), $(BUILDARCHS))
+

config/Sample.Makefile.Host

@@ -0,0 +1,185 @@
+#	Makefile.Host  for  base/src/sample
+#
+#
+#	Sample Makefile.Host showing all possible entries
+#	that are allowed using RULES.Host.
+#
+#	8-01-96 -kuk-
+#
+#
+
+TOP = ../../..
+include $(TOP)/config/CONFIG_BASE
+CMPLR = STRICT
+
+#	Add-on CFLAGS that are needed in this subproject.
+#	(If possible, all system specific flags should be
+#	 defined in CONFIG.$(ARCH_CLASS))
+#
+#	Whenever possible, ONLY USR_CFLAGS should be
+#	used. If you need special flags for your system,
+#	try to put them in CONFIG.YourSystem!
+#
+#	This is used on all systems:
+USR_CFLAGS         := -DVAR=value -Ddefine_for_all_systems
+#	This is added to the above, but only for ARCH_CLASS=BSD:
+USR_CFLAGS_BSD     := -DVERSION='Berkeley enhanced'
+#	..only for WIN32:
+USR_CFLAGS_WIN32   := -DVERSION='WIN32 port'
+#
+#	-nil- is special:
+#	if USR_CFLAGS_SYSV was undefined or empty, .._DEFAULT would have
+#	been used.
+#	To indicate
+#		"yes, there is a special USR_CFLAGS for SYSV, but it's empty"
+#	you have to set it to -nil-:
+USR_CFLAGS_SYSV    := -nil-
+#	.. for all other arch classes:
+USR_CFLAGS_DEFAULT := -DVERSION='generic Unix'
+
+#	CFLAGS that are only used to compile a_file.c or a_file.cc:
+#
+a_file_CFLAGS      := -DIN_A_FILE
+
+#	---------------------------------------------------------
+#	general rule for all .c .cc .h .hh files and scripts:
+#
+#	In here you supply just the filename without '../' etc.
+#	While building in an O.xxx subdir, the
+#	sources are extracted from either the
+#	             '..'
+#	dir or - if it exists - the dir
+#	             '../$(ARCH_CLASS)'
+#	is preferred.
+#	---------------------------------------------------------
+
+
+#	includes to install from this sub-project
+#
+#	again: if INC_$(ARCH_CLASS) is defined, it is added to INC,
+#	otherwise INC_DEFAULT (if defined) is added:
+#
+INC_DEFAULT := for_all_but_WIN32_or_hp700.h
+INC_WIN32   := only_for_WIN32.h
+INC_hp700   := -nil-		# hp700 uses no special include
+INC         := file.h
+
+# --------------------------------------------------------------------
+#	defining a library
+# --------------------------------------------------------------------
+#
+#	Contents of a library are specified via LIBSRCS.
+#	From this the platform specific object names (.o, .obj, ...)
+#	are derived automatically.
+#
+#	Platform specific objects:
+#	use LIBOBJS_$(ARCH_CLASS)  or  .._DEFAULT
+#
+#	Platform specific files can also be put in
+#	separate os/ARCH_CLASS directories!
+#
+#	For almost every file the seach order is:
+#	./os/ARCH_CLASS
+#	./os/generic
+#	.
+#	So usually only LIBSRCS should be sufficient!
+#
+LIBSRCS         := file_for_lib.c another_file.cc
+LIBSRCS_DEFAULT := posix.c
+LIBSRCS_WIN32   := win32_special.c
+LIBSRCS_BSD     := -nil-
+
+#	Type of library to build.
+#	On WIN32, SHARED results in a DLL, others may ignore this.
+LIBTYPE:=SHARED
+
+#	Ugly but necessary for WIN32:
+#	If LIBRARY is build as a dll, it may need other libraries
+#	to link with that you specify here.
+#	(because a dll is similar to a program:
+#	 all references have to be resolved)
+#
+#	If there is a file ../$(LIBRARY).def, it will
+#	be used as the dll-def-file on WIN32
+#
+#	We need this flag because
+#	1) you may not use a def file ('proper' code needs no def files)
+#	2) you may have one and still not want a DLL (for testing etc.)
+#	
+DLL_LIBS:=some_dll
+
+#	Library to build:
+#	lib$(LIBRARY).a  or   ..dll/..exp/..lib
+#
+#	Currently you can build only one (1) lib per Makefile.Host!
+#	
+LIBRARY:=libname
+
+# --------------------------------------------------------------------
+#	defining products (executable programs)
+# --------------------------------------------------------------------
+#
+#	if SRCS is undefined, it defaults to $(PROD).c 
+SRCS=a.c b.c c.c
+
+#	libs needed to link PROD and TESTPROD
+#
+# for all systems:
+PROD_LIBS         := Com Ca
+# for most systems:
+PROD_LIBS_DEFAULT := mathlib
+PROD_LIBS_WIN32   := -nil-
+
+#	Product,
+#	may be   caRepeater.o -> caRepeater
+#	or       caRepeater.obj -> caRepeater.exe
+PROD         := prod
+PROD_DEFAULT := product_for_rest
+PROD_WIN32   := product_only_for_WIN32
+PROD_BSD     := product_only_for_BSD
+PROD_SYSV    := product_only_for_SYSV
+
+#	Scripts to install
+#
+#	If there is  both  ../$(SCRIPT) and  ../$(ARCH_CLASS)/$(SCRIPT),
+#	the latter, system specific version will be installed!
+#
+SCRIPTS_DEFAULT := script_for_rest
+SCRIPTS_WIN32   := script_only_for_WIN32
+SCRIPTS_BSD     := script_only_for_BSD
+SCRIPTS         := script
+
+
+#	uncomment if you want to build these locally without installing:
+# TESTPROD = test
+
+
+# Unfortunately the above allows you only to
+# 1) build one PROD:=p from many SRCS:=a.c b.c c.c
+# or
+# 2) build many PROD:=a b c  each from a single source (a.c, b.c, c.c)
+#
+# If you have several multi-source products in the same dir
+# you have to fall back to explicit rules.
+# (suggestions for a better syntax welcome!)
+#
+# The explicit rules, however, should look like the following:
+
+#	be careful if you add rules and dependencies:
+#	use $(MV) $(RM) $(CP) $(MKDIR) $(RMDIR) $(OBJ) $(EXE) $(LINK.c) ....
+
+xxxxx$(OBJ):  c1.c c2.c h1.h
+
+#	because the output-flag (mostly '-o $@' on Unix, '-Fe$@' on WIN32)
+#	is also system dependend, it's included in $(LINK.c) and $(LINK.cc) !
+#
+prog$(EXE):	a$(OBJ) b$(OBJ)
+	$(LINK.c) a$(OBJ) b$(OBJ) $(LDLIBS)
+
+
+clean::
+	$(RM) dbLex.c
+
+include $(TOP)/config/RULES.Host
+
+#	EOF Makefile.Host

config/makeMakefile.pl

@@ -0,0 +1,30 @@
+#!/usr/local/bin/perl
+#
+#	makeMakefile.pl
+#
+#	called from RULES_ARCHS
+#
+#
+#	Usage: perl makeMakefile.pl O.*-dir Makefile-Type
+
+$dir = $ARGV[0];
+$type= $ARGV[1];
+$makefile="$dir/Makefile";
+
+if ($dir =~ m'O.(.+)')
+{
+	$t_a = $1;
+}
+else
+{
+	die "Cannot extract T_A from $dir";
+}
+
+mkdir ($dir, 0777)  unless -d $dir;
+
+open OUT, "> $makefile"  or die "Cannot create $makefile";
+print OUT "T_A=$t_a\n";
+print OUT "include ../Makefile.$type\n";
+close OUT;
+
+#	EOF makeMakefile.pl

src/Makefile

@@ -1,42 +1,14 @@
-#   $Id$
-# 	Author: Robert Zieman (ANL)
-# 	Date:	6/03/91
-# 
-# 	Experimental Physics and Industrial Control System (EPICS)
-# 
-# 	Copyright 1991, the Regents of the University of California,
-# 	and the University of Chicago Board of Governors.
-# 
-# 	This software was produced under  U.S. Government contracts:
-# 	(W-7405-ENG-36) at the Los Alamos National Laboratory,
-# 	and (W-31-109-ENG-38) at Argonne National Laboratory.
-# 
-# 	Initial development by:
-# 		The Controls and Automation Group (AT-8)
-# 		Ground Test Accelerator
-# 		Accelerator Technology Division
-# 		Los Alamos National Laboratory
-# 
-# 	Co-developed with
-# 		The Controls and Computing Group
-# 		Accelerator Systems Division
-# 		Advanced Photon Source
-# 		Argonne National Laboratory
-# 
-#  Modification Log:
-#  -----------------
-#  .01	mm-dd-yy	iii	Comment
-#  .02  08-16-93	rcz	moving most of these pre-builds back to the
-# object area Imakefile and adding DependTarget($(EARLYSRC))
 #
-#  	...
+# $Id$
 #
 
-all: bld_errSym
+TOP = ..
+include $(TOP)/config/CONFIG_BASE
 
-bld_errSym:
-	cd libCom;	../../tools/blderrSymTbl
+#
+# Directories to build defined in CONFIG_BASE
+#
 
+ 
+include $(TOP)/config/RULES_DIRS
 
-clean:
-	/bin/rm -f libCom/errInc.o

src/as/Makefile

@@ -1,15 +1,7 @@
-#
-# $Id$
-#
-#  Lowest Level Directroy Makefile
-#        by Janet Anderson
-#
-# $Log$
-#
 
-EPICS=../../..
+TOP=../..
 
-include $(EPICS)/config/CONFIG_BASE
+include $(TOP)/config/CONFIG_BASE
 
-include $(EPICS)/config/RULES_ARCHS
+include $(TOP)/config/RULES_ARCHS
 

src/as/Makefile.Host

@@ -0,0 +1,32 @@
+TOP = ../../..
+include $(TOP)/config/CONFIG_BASE
+
+USR_CFLAGS = -D_NO_PROTO
+
+INC := asDbLib.h asLib.h
+
+#	build lib As from asLib.c:
+#
+LIBSRCS := asLib.c
+LIBRARY := As
+
+
+#	All systems link the libs As, Com, Db (and again Com ??),
+#	generic Unix needs also lib m:
+#
+SYS_PROD_LIBS_DEFAULT := m
+SYS_PROD_LIBS_WIN32   := -nil-
+PROD_LIBS         := As Com Db Com
+
+PROD := ascheck
+
+include $(TOP)/config/RULES.Host
+
+# Extra rule since asLib_lex.c is included in asLib.c
+#   In my opinion, these objects should really be built
+#   independently.
+asLib$(OBJ): asLib_lex.c ../asLibRoutines.c
+
+clean::
+	@$(RM) asLib.c asLib_lex.c 
+

src/as/Makefile.Unix

@@ -1,32 +0,0 @@
-EPICS = ../../../..
-include Target.include
-include $(EPICS)/config/CONFIG_BASE
-
-USR_CFLAGS = -D_NO_PROTO
-USR_LDLIBS = -lAs -lCom -lDb -lCom -lm -s
-USR_LDFLAGS = -L.
-
-DEPLIBS_BASE = $(EPICS_BASE_LIB)
-DEPLIBS = ./libAs.a\
-	  $(DEPLIBS_BASE)/libCom.a\
-	  $(DEPLIBS_BASE)/libDb.a
-
-LEX = $(ELEX)
-YACC = $(EYACC)
-
-SRCS.c = ../ascheck.c asLib.c
-OBJS = ascheck.o
-LIBOBJS = asLib.o
-LIBNAME = libAs.a
-PROD = ascheck
-
-include $(EPICS)/config/RULES.Unix
-
-# Extra rule since asLib_lex.c is included in asLib.c
-#   In my opinion, these objects should really be built
-#   independently.
-asLib.o: asLib_lex.c ../asLibRoutines.c
-
-clean::
-	@$(RM) asLib.c asLib_lex.c 
-

src/as/Makefile.Vx

@@ -1,6 +1,5 @@
-EPICS = ../../../..
-include Target.include
-include $(EPICS)/config/CONFIG_BASE
+TOP = ../../..
+include $(TOP)/config/CONFIG_BASE
 
 USR_CFLAGS = -DACCESS_SECURITY -D_NO_PROTO
 
@@ -8,7 +7,7 @@ SRCS.c = ../asDbLib.c ../asCa.c asLib.c
 LIBOBJS = asDbLib.o asCa.o asLib.o
 LIBNAME = asLibrary
 
-include $(EPICS)/config/RULES.Vx
+include $(TOP)/config/RULES.Vx
 
 # Extra rule since asLib_lex.c is included in asLib.c
 #   In my opinion, these objects should really be built

src/as/asCa.c

@@ -65,7 +65,6 @@ DEVELOPMENT CENTER AT ARGONNE NATIONAL LABORATORY (708-252-2000).
 #include <cadef.h>
 #include <caerr.h>
 #include <caeventmask.h>
-#include <calink.h>
 #include <task_params.h>
 #include <alarm.h>
 
@@ -128,10 +127,9 @@ LOCAL void eventCallback(struct event_handler_args eha)
     ASGINP		*pasginp;
     CAPVT		*pcapvt;
     ASG			*pasg;
-    struct dbr_sts_double *pdata = eha.dbr;
+    READONLY struct dbr_sts_double *pdata = eha.dbr;
     int			Ilocked=FALSE;
 
-    
     if(!caInitializing) {
 	FASTLOCK(&asLock);
 	Ilocked = TRUE;
@@ -170,9 +168,8 @@ LOCAL void asCaTask(void)
 	    pasg->inpBad |= (1<<pasginp->inpIndex);
 	    pcapvt = pasginp->capvt = asCalloc(1,sizeof(CAPVT));
 	    /*Note calls connectCallback immediately called for local Pvs*/
-	    SEVCHK(ca_build_and_connect(pasginp->inp,TYPENOTCONN,0,
-		&pcapvt->chid,0,connectCallback,pasginp),
-		"ca_build_and_connect");
+	    SEVCHK(ca_search_and_connect(pasginp->inp,&pcapvt->chid,
+		connectCallback,pasginp),"ca_build_and_connect");
 	    /*Note calls accessRightsCallback immediately called for local Pvs*/
 	    SEVCHK(ca_replace_access_rights_event(pcapvt->chid,accessRightsCallback),
 		"ca_replace_access_rights_event");

src/as/asDbLib.c

@@ -58,9 +58,14 @@ DEVELOPMENT CENTER AT ARGONNE NATIONAL LABORATORY (708-252-2000).
 #include <stddef.h>
 #include <stdio.h>
 #include <string.h>
+
 #include <dbDefs.h>
 #include <taskwd.h>
+#include <alarm.h>
+#include <caeventmask.h>
 #include <dbStaticLib.h>
+#include <dbAccess.h>
+#include <dbEvent.h>
 #include <asLib.h>
 #include <asDbLib.h>
 #include <dbCommon.h>
@@ -68,7 +73,7 @@ DEVELOPMENT CENTER AT ARGONNE NATIONAL LABORATORY (708-252-2000).
 #include <subRecord.h>
 #include <task_params.h>
 
-extern struct dbBase *pdbBase;
+extern struct dbBase *pdbbase;
 static FILE *stream;
 
 #define BUF_SIZE 100
@@ -97,13 +102,13 @@ static int my_yyinput(char *buf, int max_size)
 
 static long asDbAddRecords(void)
 {
-    DBENTRY		dbentry;
-    DBENTRY		*pdbentry=&dbentry;
-    long		status;
-    struct dbCommon	*precord;
+    DBENTRY	dbentry;
+    DBENTRY	*pdbentry=&dbentry;
+    long	status;
+    dbCommon	*precord;
 
-    dbInitEntry(pdbBase,pdbentry);
-    status = dbFirstRecdes(pdbentry);
+    dbInitEntry(pdbbase,pdbentry);
+    status = dbFirstRecordType(pdbentry);
     while(!status) {
 	status = dbFirstRecord(pdbentry);
 	while(!status) {
@@ -115,7 +120,7 @@ static long asDbAddRecords(void)
 	    }
 	    status = dbNextRecord(pdbentry);
 	}
-	status = dbNextRecdes(pdbentry);
+	status = dbNextRecordType(pdbentry);
     }
     dbFinishEntry(pdbentry);
     return(0);
@@ -180,8 +185,9 @@ static long asInitCommon(void)
 int asInit(void)
 {
 
-    asInitCommon();
-    return(0);
+    /*If no access configuration file defined return success*/
+    if(!pacf) return(0);
+    return(asInitCommon());
 }
 
 static void wdCallback(ASDBCALLBACK *pcallback)
@@ -235,7 +241,7 @@ int asInitAsyn(ASDBCALLBACK *pcallback)
 static void myCallback(CALLBACK *pcallback)
 {
     ASDBCALLBACK	*pasdbcallback = (ASDBCALLBACK *)pcallback;
-    struct subRecord	*precord;
+    subRecord	*precord;
     struct rset		*prset;
 
     callbackGetUser(precord,pcallback);
@@ -245,12 +251,12 @@ static void myCallback(CALLBACK *pcallback)
 	recGblSetSevr(precord,READ_ALARM,precord->brsv);
 	recGblRecordError(pasdbcallback->status,precord,"asInit Failed");
     }
-    dbScanLock((struct dbCommon *)precord);
-    (*prset->process)((struct dbCommon *)precord);
-    dbScanUnlock((struct dbCommon *)precord);
+    dbScanLock((dbCommon *)precord);
+    (*prset->process)((dbCommon *)precord);
+    dbScanUnlock((dbCommon *)precord);
 }
 
-long asSubInit(struct subRecord *precord,int pass)
+long asSubInit(subRecord *precord,int pass)
 {
     ASDBCALLBACK *pcallback;
 
@@ -261,7 +267,7 @@ long asSubInit(struct subRecord *precord,int pass)
     return(0);
 }
 
-long asSubProcess(struct subRecord *precord)
+long asSubProcess(subRecord *precord)
 {
     ASDBCALLBACK *pcallback = (ASDBCALLBACK *)precord->dpvt;
 
@@ -278,8 +284,8 @@ long asSubProcess(struct subRecord *precord)
 
 int asDbGetAsl(void *paddress)
 {
-    struct dbAddr	*paddr = paddress;
-    struct fldDes	*pflddes;
+    DBADDR	*paddr = paddress;
+    dbFldDes	*pflddes;
 
     pflddes = paddr->pfldDes;
     return((int)pflddes->as_level);
@@ -287,8 +293,8 @@ int asDbGetAsl(void *paddress)
 
 ASMEMBERPVT  asDbGetMemberPvt(void *paddress)
 {
-    struct dbAddr	*paddr = paddress;
-    struct dbCommon	*precord;
+    DBADDR	*paddr = paddress;
+    dbCommon	*precord;
 
     precord = paddr->precord;
     return((ASMEMBERPVT)precord->asp);
@@ -296,20 +302,23 @@ ASMEMBERPVT  asDbGetMemberPvt(void *paddress)
 
 static void astacCallback(ASCLIENTPVT clientPvt,asClientStatus status)
 {
-    printf("astac callback: status=%d",status);
+    char *recordname;
+
+    recordname = (char *)asGetClientPvt(clientPvt);
+    printf("astac callback %s: status=%d",recordname,status);
     printf(" get %s put %s\n",(asCheckGet(clientPvt) ? "Yes" : "No"),
 	(asCheckPut(clientPvt) ? "Yes" : "No"));
 }
 
 int astac(char *pname,char *user,char *location)
 {
-    struct dbAddr	*paddr;
-    long		status;
-    ASCLIENTPVT		*pasclientpvt=NULL;
-    struct dbCommon	*precord;
-    struct fldDes	*pflddes;
+    DBADDR	*paddr;
+    long	status;
+    ASCLIENTPVT	*pasclientpvt=NULL;
+    dbCommon	*precord;
+    dbFldDes	*pflddes;
 
-    paddr = dbCalloc(1,sizeof(struct dbAddr) + sizeof(ASCLIENTPVT));
+    paddr = dbCalloc(1,sizeof(DBADDR) + sizeof(ASCLIENTPVT));
     pasclientpvt = (ASCLIENTPVT *)(paddr + 1);
     status=dbNameToAddr(pname,paddr);
     if(status) {
@@ -324,6 +333,7 @@ int astac(char *pname,char *user,char *location)
 	errMessage(status,"asAddClient error");
 	return(1);
     } else {
+	asPutClientPvt(*pasclientpvt,(void *)precord->name);
 	asRegisterClientCallback(*pasclientpvt,astacCallback);
     }
     return(0);
@@ -331,7 +341,7 @@ int astac(char *pname,char *user,char *location)
 
 static void myMemberCallback(ASMEMBERPVT memPvt)
 {
-    struct dbCommon	*precord;
+    dbCommon	*precord;
 
     precord = asGetMemberPvt(memPvt);
     if(precord) printf(" Record:%s",precord->name);

src/as/asDbLib.h

@@ -0,0 +1,78 @@
+/* share/epicsH/dbAsLib.h	*/
+/*  $Id$ */
+/* Author:  Marty Kraimer Date:    02-23-94*/
+/*****************************************************************
+                          COPYRIGHT NOTIFICATION
+*****************************************************************
+
+THE FOLLOWING IS A NOTICE OF COPYRIGHT, AVAILABILITY OF THE CODE,
+AND DISCLAIMER WHICH MUST BE INCLUDED IN THE PROLOGUE OF THE CODE
+AND IN ALL SOURCE LISTINGS OF THE CODE.
+ 
+(C)  COPYRIGHT 1993 UNIVERSITY OF CHICAGO
+ 
+Argonne National Laboratory (ANL), with facilities in the States of 
+Illinois and Idaho, is owned by the United States Government, and
+operated by the University of Chicago under provision of a contract
+with the Department of Energy.
+
+Portions of this material resulted from work developed under a U.S.
+Government contract and are subject to the following license:  For
+a period of five years from March 30, 1993, the Government is
+granted for itself and others acting on its behalf a paid-up,
+nonexclusive, irrevocable worldwide license in this computer
+software to reproduce, prepare derivative works, and perform
+publicly and display publicly.  With the approval of DOE, this
+period may be renewed for two additional five year periods. 
+Following the expiration of this period or periods, the Government
+is granted for itself and others acting on its behalf, a paid-up,
+nonexclusive, irrevocable worldwide license in this computer
+software to reproduce, prepare derivative works, distribute copies
+to the public, perform publicly and display publicly, and to permit
+others to do so.
+
+*****************************************************************
+                                DISCLAIMER
+*****************************************************************
+
+NEITHER THE UNITED STATES GOVERNMENT NOR ANY AGENCY THEREOF, NOR
+THE UNIVERSITY OF CHICAGO, NOR ANY OF THEIR EMPLOYEES OR OFFICERS,
+MAKES ANY WARRANTY, EXPRESS OR IMPLIED, OR ASSUMES ANY LEGAL
+LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS, OR
+USEFULNESS OF ANY INFORMATION, APPARATUS, PRODUCT, OR PROCESS
+DISCLOSED, OR REPRESENTS THAT ITS USE WOULD NOT INFRINGE PRIVATELY
+OWNED RIGHTS.  
+
+*****************************************************************
+LICENSING INQUIRIES MAY BE DIRECTED TO THE INDUSTRIAL TECHNOLOGY
+DEVELOPMENT CENTER AT ARGONNE NATIONAL LABORATORY (708-252-2000).
+ *
+ * Modification Log:
+ * -----------------
+ * .01  02-23-94	mrk	Initial Implementation
+ */
+
+#ifndef INCdbAsLibh
+#define INCdbAsLibh
+#include <asLib.h>
+#include <callback.h>
+
+typedef struct {
+    CALLBACK	callback;
+    long	status;
+} ASDBCALLBACK;
+
+int asSetFilename(char *acf);
+int asInit(void);
+int asInitAsyn(ASDBCALLBACK *pcallback);
+int asDbGetAsl( void *paddr);
+ASMEMBERPVT  asDbGetMemberPvt( void *paddr);
+int asdbdump( void);
+int aspuag(char *uagname);
+int asphag(char *hagname);
+int asprules(char *asgname);
+int aspmem(char *asgname,int clients);
+void asCaStart(void);
+void asCaStop(void);
+
+#endif /*INCdbAsLibh*/

src/as/asLib.h

@@ -0,0 +1,223 @@
+/* $Id$ */
+/* Author:  Marty Kraimer Date:    09-27-93*/
+/*****************************************************************
+                          COPYRIGHT NOTIFICATION
+*****************************************************************
+
+THE FOLLOWING IS A NOTICE OF COPYRIGHT, AVAILABILITY OF THE CODE,
+AND DISCLAIMER WHICH MUST BE INCLUDED IN THE PROLOGUE OF THE CODE
+AND IN ALL SOURCE LISTINGS OF THE CODE.
+ 
+(C)  COPYRIGHT 1993 UNIVERSITY OF CHICAGO
+ 
+Argonne National Laboratory (ANL), with facilities in the States of 
+Illinois and Idaho, is owned by the United States Government, and
+operated by the University of Chicago under provision of a contract
+with the Department of Energy.
+
+Portions of this material resulted from work developed under a U.S.
+Government contract and are subject to the following license:  For
+a period of five years from March 30, 1993, the Government is
+granted for itself and others acting on its behalf a paid-up,
+nonexclusive, irrevocable worldwide license in this computer
+software to reproduce, prepare derivative works, and perform
+publicly and display publicly.  With the approval of DOE, this
+period may be renewed for two additional five year periods. 
+Following the expiration of this period or periods, the Government
+is granted for itself and others acting on its behalf, a paid-up,
+nonexclusive, irrevocable worldwide license in this computer
+software to reproduce, prepare derivative works, distribute copies
+to the public, perform publicly and display publicly, and to permit
+others to do so.
+
+*****************************************************************
+                                DISCLAIMER
+*****************************************************************
+
+NEITHER THE UNITED STATES GOVERNMENT NOR ANY AGENCY THEREOF, NOR
+THE UNIVERSITY OF CHICAGO, NOR ANY OF THEIR EMPLOYEES OR OFFICERS,
+MAKES ANY WARRANTY, EXPRESS OR IMPLIED, OR ASSUMES ANY LEGAL
+LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS, OR
+USEFULNESS OF ANY INFORMATION, APPARATUS, PRODUCT, OR PROCESS
+DISCLOSED, OR REPRESENTS THAT ITS USE WOULD NOT INFRINGE PRIVATELY
+OWNED RIGHTS.  
+
+*****************************************************************
+LICENSING INQUIRIES MAY BE DIRECTED TO THE INDUSTRIAL TECHNOLOGY
+DEVELOPMENT CENTER AT ARGONNE NATIONAL LABORATORY (708-252-2000).
+ *
+ * Modification Log:
+ * -----------------
+ * .01  09-27-93	mrk	Initial Implementation
+ */
+#ifndef INCasLibh
+#define INCasLibh
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <errMdef.h>
+#include <ellLib.h>
+
+typedef struct asgMember *ASMEMBERPVT;
+typedef struct asgClient *ASCLIENTPVT;
+typedef int (*ASINPUTFUNCPTR)(char *buf,int max_size);
+typedef enum{
+    asClientCOAR	/*Change of access rights*/
+    /*For now this is all*/
+} asClientStatus;
+typedef void (*ASCLIENTCALLBACK) (ASCLIENTPVT,asClientStatus);
+/* The following  routines are macros with the following syntax
+long asCheckGet(ASCLIENTPVT asClientPvt);
+long asCheckPut(ASCLIENTPVT asClientPvt);
+end of macros
+*/
+int asInit(void);
+long asInitialize(ASINPUTFUNCPTR inputfunction);
+/*caller must provide permanent storage for asgName*/
+long asAddMember(ASMEMBERPVT *asMemberPvt,char *asgName);
+long asRemoveMember(ASMEMBERPVT *asMemberPvt);
+/*caller must provide permanent storage for newAsgName*/
+long asChangeGroup(ASMEMBERPVT *asMemberPvt,char *newAsgName);
+void *asGetMemberPvt(ASMEMBERPVT asMemberPvt);
+void asPutMemberPvt(ASMEMBERPVT asMemberPvt,void *userPvt);
+/*client must provide permanent storage for user and host*/
+long asAddClient(ASCLIENTPVT *asClientPvt,ASMEMBERPVT asMemberPvt,
+	int asl,char *user,char *host);
+/*client must provide permanent storage for user and host*/
+long asChangeClient(ASCLIENTPVT asClientPvt,int asl,char *user,char *host);
+long asRemoveClient(ASCLIENTPVT *asClientPvt);
+void *asGetClientPvt(ASCLIENTPVT asClientPvt);
+void asPutClientPvt(ASCLIENTPVT asClientPvt,void *userPvt);
+long asRegisterClientCallback(ASCLIENTPVT asClientPvt,
+	ASCLIENTCALLBACK pcallback);
+long asComputeAllAsg(void);
+/*asComputeAsg is defined after ASG is defined*/
+long asCompute(ASCLIENTPVT asClientPvt);
+int asDump(void (*memcallback)(ASMEMBERPVT),void (*clientcallback)(ASCLIENTPVT),int verbose);
+int asDumpUag(char *uagname);
+int asDumpHag(char *hagname);
+int asDumpRules(char *asgname);
+int asDumpMem(char *asgname,void (*memcallback)(ASMEMBERPVT),int clients);
+int asDumpHash(void);
+
+#define S_asLib_clientsExist 	(M_asLib| 1) /*Client Exists*/
+#define S_asLib_noUag 		(M_asLib| 2) /*User Access Group does not exist*/
+#define S_asLib_noHag 		(M_asLib| 3) /*Host Access Group does not exist*/
+#define S_asLib_noAccess	(M_asLib| 4) /*access security: no access allowed*/
+#define S_asLib_noModify	(M_asLib| 5) /*access security: no modification allowed*/
+#define S_asLib_badConfig	(M_asLib| 6) /*access security: bad configuration file*/
+#define S_asLib_badCalc		(M_asLib| 7) /*access security: bad calculation espression*/
+#define S_asLib_dupAsg 		(M_asLib| 8) /*Duplicate Access Security Group */
+#define S_asLib_InitFailed 	(M_asLib| 9) /*access security: Init failed*/
+#define S_asLib_asNotActive 	(M_asLib|10) /*access security is not active*/
+#define S_asLib_badMember 	(M_asLib|11) /*access security: bad ASMEMBERPVT*/
+#define S_asLib_badClient 	(M_asLib|12) /*access security: bad ASCLIENTPVT*/
+#define S_asLib_badAsg 		(M_asLib|13) /*access security: bad ASG*/
+#define S_asLib_noMemory	(M_asLib|14) /*access security: no Memory */
+
+/*Private declarations */
+#define ASMAXINP 12
+#ifdef vxWorks
+#include <fast_lock.h>
+extern FAST_LOCK asLock;
+extern int asLockInit;
+#endif	
+extern int asActive;
+/* definition of access rights*/
+typedef enum{asNOACCESS,asREAD,asWRITE} asAccessRights;
+
+/*Base pointers for access security*/
+typedef struct asBase{
+	ELLLIST	uagList;
+	ELLLIST	hagList;
+	ELLLIST	asgList;
+	void	*phash;
+} ASBASE;
+/*Defs for User Access Groups*/
+typedef struct{
+	ELLNODE	node;
+	char	*user;
+} UAGNAME;
+typedef struct uag{
+	ELLNODE	node;
+	char	*name;
+	ELLLIST	list;	/*list of UAGNAME*/
+} UAG;
+/*Defs for Host Access Groups*/
+typedef struct{
+	ELLNODE	node;
+	char	*host;
+} HAGNAME;
+typedef struct hag{
+	ELLNODE	node;
+	char	*name;
+	ELLLIST	list;	/*list of HAGNAME*/
+} HAG;
+/*Defs for Access SecurityGroups*/
+typedef struct {
+	ELLNODE	node;
+	UAG	*puag;
+}ASGUAG;
+typedef struct {
+	ELLNODE	node;
+	HAG	*phag;
+}ASGHAG;
+typedef struct{
+	ELLNODE		node;
+	asAccessRights	access;
+	int		level;
+	int		inpUsed; /*mask for which inputs are used*/
+	int		result;  /*Result of calc converted to TRUE/FALSE*/
+	char		*calc;
+	void		*rpcl;
+	ELLLIST		uagList; /*List of ASGUAG*/
+	ELLLIST		hagList; /*List of ASGHAG*/
+} ASGRULE;
+typedef struct{
+	ELLNODE		node;
+	char		*inp;
+	void		*capvt;
+	struct asg	*pasg;
+	int		inpIndex;
+}ASGINP;
+typedef struct asg{
+	ELLNODE	node;
+	char	*name;
+	ELLLIST	inpList;
+	ELLLIST	ruleList;
+	ELLLIST	memberList;
+	double	*pavalue;	/*pointer to array of input values*/
+	int	inpBad;		/*mask for which inputs are bad*/
+	int	inpChanged;	/*mask showing inputs that have changed*/
+} ASG;
+typedef struct asgMember {
+	ELLNODE		node;
+	ASG		*pasg;
+	ELLLIST		clientList;
+	char		*asgName;
+	void		*userPvt;
+} ASGMEMBER;
+typedef struct asgClient {
+	ELLNODE		node;	
+	ASGMEMBER	*pasgMember;
+	char		*user;
+	char		*host;
+	void		*userPvt;
+	ASCLIENTCALLBACK pcallback;
+	int		level;
+	asAccessRights	access;
+} ASGCLIENT;
+/* function prototypes*/
+void *asCalloc(size_t nobj,size_t size);
+long asComputeAsg(ASG *pasg);
+/*macros*/
+#define asCheckGet(asClientPvt)\
+	(asActive ?\
+		((asClientPvt)->access>=asREAD ? TRUE : FALSE)\
+	: TRUE)
+#define asCheckPut(asClientPvt)\
+	(asActive ?\
+		((asClientPvt)->access>=asWRITE ? TRUE : FALSE)\
+	: TRUE)
+
+#endif /*INCasLibh*/

src/as/asLibRoutines.c

@@ -72,10 +72,6 @@ int	asActive = FALSE;
 /*storage for freelist */
 static void *freeListPvt = NULL;
 
-/*Forward declarations for Non ANSI routines*/
-long calcPerform(double *parg,double *presult,char   *post);
-long postfix(char *pinfix, char *ppostfix,short *perror);
-
 #define RPCL_LEN 184
 #define DEFAULT "DEFAULT"
 
@@ -123,7 +119,7 @@ long asInitialize(ASINPUTFUNCPTR inputfunction)
 	pasg->pavalue = asCalloc(ASMAXINP,sizeof(double));
 	pasg = (ASG *)ellNext((ELLNODE *)pasg);
     }
-    gphInitPvt(&pasbase->phash);
+    gphInitPvt(&pasbase->phash,256);
     /*Hash each uagname and each hagname*/
     puag = (UAG *)ellFirst(&pasbase->uagList);
     while(puag) {

src/as/asLib_lex.l

@@ -8,7 +8,7 @@ static ASINPUTFUNCPTR *my_yyinput;
 #undef YY_INPUT
 #define YY_INPUT(b,r,ms) (r=(*my_yyinput)(b,ms))
 
-yyreset()
+static int yyreset()
 {
 	line_num=1;
 	BEGIN INITIAL;
@@ -66,9 +66,13 @@ INP[A-L] {/* If A-L is changed then ASMAXINP must also be changed*/
 \n      { line_num ++;}
 .       { 
 		char message[20];
+		YY_BUFFER_STATE *dummy=0;
 	  
 		sprintf(message,"invalid character '%c'",yytext[0]);
 	  	yyerror(message);
+		/*The following suppresses compiler warning messages*/
+		if(FALSE) yyunput('c',message);
+		if(FALSE) yy_switch_to_buffer(*dummy);
 	}
 
 %%

src/bdt/Makefile

@@ -4,15 +4,10 @@
 #  Base Lowest Level Directroy Makefile
 #        by Janet Anderson
 #
-# $Log$
-# Revision 1.1  1994/09/07  19:26:22  jba
-# New file
-#
-#
 
-EPICS=../../..
+TOP=../..
 
-include $(EPICS)/config/CONFIG_BASE
+include $(TOP)/config/CONFIG_BASE
 
-include $(EPICS)/config/RULES_ARCHS
+include $(TOP)/config/RULES_ARCHS
 

src/bdt/Makefile.Host

@@ -0,0 +1,10 @@
+TOP = ../../..
+include $(TOP)/config/CONFIG_BASE
+
+INC := bdt.h
+
+LIBSRCS := bdt.c
+
+LIBRARY := Bdt
+
+include $(TOP)/config/RULES.Host

src/bdt/Makefile.Unix

@@ -1,10 +0,0 @@
-EPICS = ../../../..
-include Target.include
-include $(EPICS)/config/CONFIG_BASE
-
-
-LIBOBJS += bdt.o
-
-LIBNAME = libBdt.a
-
-include $(EPICS)/config/RULES.Unix

src/bdt/Makefile.Vx

@@ -1,6 +1,5 @@
-EPICS = ../../../..
-include Target.include
-include $(EPICS)/config/CONFIG_BASE
+TOP = ../../..
+include $(TOP)/config/CONFIG_BASE
 
 SRCS.c += ../bdt.c
 SRCS.c += ../bdtServ.c
@@ -14,7 +13,7 @@ OBJS += bdtServPv.o
 
 PROD = bdt
 
-include $(EPICS)/config/RULES.Vx
+include $(TOP)/config/RULES.Vx
 
 $(PROD): $(OBJS)
 	$(RM) $@

src/bdt/bdt.c

@@ -1,4 +1,6 @@
+#include <stdlib.h>
 #include <stdio.h>
+#include <string.h>
 #include <signal.h>
 #include <errno.h>
 #include <sys/wait.h>
@@ -158,7 +160,7 @@ BDT* BdtIpOpen(char* address, int Port)
 	{
 		if ((pHostent = gethostbyname (address)) == NULL)
 			return(NULL);
-		bcopy (pHostent->h_addr, (char *) &addr, sizeof(addr));
+		memcpy (&addr,pHostent->h_addr,sizeof(addr));
 		printf("Converting name >%s< to IP number %08.8X\n", address, addr);
 	}
 #endif

src/bdt/bdt.h

@@ -0,0 +1,304 @@
+#ifndef __BDT_H
+#define __BDT_H
+
+/*
+ * $Log$
+ * Revision 1.4  1995/07/27  14:21:58  winans
+ * General mods for first release.
+ *
+ * Revision 1.3  1995/05/30  14:47:17  winans
+ * Added BDT_Ping and a port parm to BdtIpOpen.
+ *
+ * Revision 1.2  1995/05/16  15:38:00  winans
+ * Added BdtEof to BdtState enum list.
+ * Added WriteLock and DeltaFlagLock to vxWorks-side BDTs.
+ * Added port number args to BdtOpenListenerTCP() and BdtOpenListenerUDP().
+ *
+ * Revision 1.1  1995/05/11  02:08:44  jbk
+ * new file for the bulk data transfer stuff
+ *
+ */
+
+/*
+	Author:	Jim Kowalkowski
+	Date:	5/1/95
+*/
+
+/* got from protocols(5) (cheated) or /etc/protocols */
+#define BDT_UDP				17
+#define BDT_TCP				6
+
+/* server ports - in the user reserved area */
+#define BDT_UDP_PORT		50296
+#define BDT_TCP_PORT		50297
+
+/* Well known service names */
+#define BDT_SERVICE_PV		"pv"
+#define BDT_SERVICE_NAME	"name"
+#define BDT_SERVICE_DRV		"drv"
+
+#define PV_TRANSFER_SIZE 512
+
+/* How often some type of message is expected to arrive at each end-point */
+#define BDT_PING_INTERVAL		10			/* Specified in seconds */
+#define BDT_CONENCTION_TIMEOUT	25			/* Specified in seconds */
+
+/* message types */
+#define BDT_Ok			0
+#define BDT_Connect		1
+#define BDT_Error		2
+#define BDT_Get			3
+#define BDT_Put			4
+#define BDT_Close		5
+#define BDT_Monitor		6
+#define BDT_Value		7
+#define BDT_Delta		8
+#define BDT_Add			9
+#define BDT_Delete		10
+#define BDT_Ping		11
+
+#define	BDT_LAST_VERB	11
+
+/* protocol states */
+typedef enum
+	{ BdtIdle,BdtUnbound,BdtSData,BdtRData,BdtBad,BdtEof } BdtState;
+
+/******************************************************************************
+*
+* The format of a BDT_Connect message is:
+*
+* BdtMsgHead.verb			(unsigned 16 binary = BDT_Connect)
+* BdtMsgHead.size			(unsigned 32 bit binary)
+* service name length		(unsigned 8 bit binary)
+* service name string		(service name length characters)
+* arg1 string length		(unsigned 8 bit binary)
+* arg1 string 				(arg1 string length characters)
+* ...
+* 
+******************************************************************************/
+
+/******************************************************************************
+*
+* NOTICE!!!!!!!!  MONITORS ARE NOT CURRENTLY SUPPORTED!!!!!!!
+*
+* The BdtMonitor structure is created on the server-side when ever a client
+* registers a monitor.  It contains a tag string that is given by the client
+* when the monitor is established.  This tag string is an arbitrary binary
+* string of bytes... presumably used by the client as a pointer or index 
+* to a status structure that represents the resource being monitored.
+*
+* The Message portion of the BdtMonitor represents the body of the message
+* that is to be sent to the client to indicate the status of the event that
+* happened.  (It may not be present in the message.)
+*
+* The BdtMonitor structures are only hooked into the bdt.pMonitor list if they
+* are waiting to be sent to the client.
+*
+* The format of a BDT_Monitor message is:
+*
+* BdtMsgHead.verb			(unsigned 16 binary = BDT_Monitor)
+* BdtMsgHead.size			(unsigned 32 bit binary)
+* TagLength					(unsigned 32 bit binary)
+* Tag						(TagLength characters)
+* service name string		(BdtMsgHead.size-TagLength-4 characters)
+*
+* The <service name string> for a monitor message should include the object
+* name(s) that are to be monitored.
+*
+*
+* The format of a BDT_Delta message is:
+*
+* BdtMsgHead.verb			(unsigned 16 binary = BDT_Delta)
+* BdtMsgHead.size			(unsigned 32 bit binary)
+* BdtMonitor.TagLength		(unsigned 32 bit binary)
+* BdtMonitor.Tag			(BdtMonitor.TagLength characters)
+* BdtMonitor.MessageLength	(unsigned 32 bit binary)
+* BdtMonitor.Message		(BdtMonitor.MessageLength characters)
+*
+******************************************************************************/
+
+struct bdt;
+typedef struct BdtMonitor
+{
+	struct bdt			*pBdt;			/* Connection to send notices back to */
+	char				*Tag;			/* Client-generated tag */
+	int					TagLength;		/* Length of tag */
+	char				*Message;		/* Server-gen'd status change message */
+	int					MessageLength;	/* Length of Message */
+	struct BdtMonitor	*pNext;			/* Allow queue of N outbound on BDT */
+} BdtMonitor;
+
+typedef int (*BdthandlerFunc)(struct bdt *Bdt);
+typedef struct BdtHandlers
+{
+	BdthandlerFunc	Ok;
+	BdthandlerFunc	Connect;
+	BdthandlerFunc	Error;
+	BdthandlerFunc	Get;
+	BdthandlerFunc	Put;
+	BdthandlerFunc	Close;
+	BdthandlerFunc	Monitor;
+	BdthandlerFunc	Value;
+	BdthandlerFunc	Delta;
+	BdthandlerFunc	Add;
+	BdthandlerFunc	Delete;
+	BdthandlerFunc	Ping;
+} BdtHandlers;
+
+struct bdt
+{
+	int soc;
+	int remaining_send;
+	int remaining_recv;
+	BdtState state;
+
+#ifdef vxWorks
+	char		*Name;					/* Service name (used for messages) */
+	SEM_ID		WriteLock;
+	SEM_ID		MonitorLock;
+	BdtMonitor	*pMonitor;				/* List of pending monitor events */
+	BdthandlerFunc	*pHandlers;			/* Support routines for messages */
+	void		*pService;				/* Provate pointer for service */
+#endif
+};
+typedef struct bdt BDT;
+
+struct BdtMsgHead
+{
+	unsigned short verb;
+	unsigned long size;
+};
+typedef struct BdtMsgHead BdtMsgHead;
+
+#define BdtGetSocket(BDT)			(BDT->soc)
+#define BdtGetResidualWrite(BDT)	(BDT->remaining_send)
+#define BdtGetResidualRead(BDT)		(BDT->remaining_recv)
+#define BdtGetProtoState(BDT)		(BDT->state)
+#ifdef vxWorks
+#define BdtGetServiceName(BDT)		(BDT->Name)
+#endif
+
+/* ------------------------------------------------------------------------
+	Server functions:
+
+	BdtOpenListenerTCP:
+	 Open a socket locally bound to the bulk data transfer TCP server port.
+	 Set the socket up as a listener.  Return the open socket.
+
+	BdtOpenListenerUDP:
+	 Open a socket locally bound to the bulk data transfer UDP server port.
+	 Return the open socket.
+
+   ------------------------------------------------------------------------ */
+
+int BdtOpenListenerTCP(int Port);
+int BdtOpenListenerUDP(int Port);
+
+/* ------------------------------------------------------------------------
+	Utilities functions:
+
+	BdtMakeServer:
+	 Available under unix only.  Put process in the background, disassociate
+	 process from controlling terminal and parent process, and prepare
+	 signals for reaping children spawned by the process.
+
+	BdtServerClearSignals:
+	 Clear the signal handlers for a process, set them to default.
+
+	BdtMakeBDT:
+	 Allocate and initialize a BDT from a socket.
+
+	BdtFreeBDT:
+	 Close the open socket and free the memory for the BDT.
+   ------------------------------------------------------------------------ */
+
+#ifndef vxWorks
+int BdtMakeServer(char** argv);	
+int BdtServerClearSignals();
+#endif
+
+BDT* BdtMakeBDT(int socket);	/* make a BDT from a socket */
+int BdtFreeBDT(BDT* bdt);		/* free a BDT */
+
+/* ------------------------------------------------------------------------
+	Client functions:
+
+	BdtIpOpen:
+	 Open a connection to an bulk data transfer given the IP address of the
+	 machine where the server exists.  The returned BDT is returned unbound,
+	 a connect must be issued before data transactions can take place.
+
+	BdtPvOpen:
+	 Open and connect (bind) to a process variable.  Data transfers can
+	 take place after this call.
+
+	BdtServiceConnect:
+	 Used in conjunction with BdtIpOpen().  Bind an unbound BDT to a
+	 generic service provided by the server at the other end of the open
+	 connection.
+
+	BdtPvConnect:
+	 Used in conjunction with BdtIpOpen().  Bind an unbound BDT to a
+	 process variable on the server at the other end of the open
+	 connection.
+
+	BdtClose:
+	 Completely close a connection to a server and free the BDT.
+
+	BdtDeltaPending:
+	 Check if a delta message arrived at an unexpected time.  This function
+	 clears the pending condition.
+
+   ------------------------------------------------------------------------ */
+
+BDT* BdtIpOpen(char* address, int port);
+BDT* BdtPvOpen(char *IocName, char* PvName);
+int BdtServiceConnect(BDT* bdt, char* service_name, char *args);
+int BdtPvConnect(BDT* bdt, char* pv_name);
+int BdtClose(BDT* bdt);	
+int BdtPvDeltaPending(BDT* bdt);
+
+/* ------------------------------------------------------------------------
+	Client and Server shared functions:
+
+	BdtSendHeader:
+	 Send a message header out to a connect BDT with command and message body
+	 size information.
+
+	BdtSendData:
+	 Send a portion or all the message body out a connected BDT.  A header
+	 must have previously been sent with length information.  The interface
+	 will only allow the amount of data specified in the header to be sent.
+
+	BdtWrite:
+	 This call will block until all the data specified in the size parameter
+	 are sent down the socket.
+
+	BdtRead:
+	 This call will block until all the data specified in the size parameter
+	 is read from the socket.
+
+	BdtReceiveHeader:
+	 Wait until a message header appears at the BDT, return the action and
+	 remaining message body size.
+
+	BdtReceiveData:
+	 Wait for a chunk or the entire body of a message to appear at the BDT.
+	 Put the data into the buffer for a maximum size.  Return the amount of
+	 data actually received, or zero if there is no data remaining for the
+	 current message.
+
+   ------------------------------------------------------------------------ */
+
+int BdtSendHeader(BDT* bdt, unsigned short verb, int size);
+int BdtSendData(BDT* bdt, void* buffer, int size);
+int BdtReceiveHeader(BDT* bdt, int* verb, int* size);
+int BdtReceiveData(BDT* bdt, void* buffer, int size);
+int BdtRead(int socket, void* buffer, int size);
+int BdtWrite(int socket, void* buffer, int size);
+int BdtFlushOutput(BDT* bdt);
+int BdtPvPutArray(BDT *bdt, short DbrType, void *Buf, unsigned long NumElements, unsigned long ElementSize);
+
+
+#endif
+

src/bpt/Makefile

@@ -0,0 +1,7 @@
+
+TOP=../..
+
+include $(TOP)/config/CONFIG_BASE
+
+include $(TOP)/config/RULES_ARCHS
+

src/bpt/Makefile.Host

@@ -0,0 +1,14 @@
+#	Makefile.Host for base/src/bpt
+#
+
+TOP = ../../..
+include $(TOP)/config/CONFIG_BASE
+
+INC := cvtTable.h
+
+SRCS := makeBpt.c
+PROD := makeBpt
+
+include $(TOP)/config/RULES.Host
+
+#	EOF Makefile.Host for base/src/bpt

src/bpt/Makefile.Vx

@@ -0,0 +1,21 @@
+TOP = ../../..
+include $(TOP)/config/CONFIG_BASE
+
+MENUS += menuConvert.h
+
+BPTS += bptTypeJdegC.dbd
+BPTS += bptTypeJdegF.dbd
+BPTS += bptTypeKdegC.dbd
+BPTS += bptTypeKdegF.dbd
+
+
+SRCS.c = \
+	../cvtBpt.c
+
+LIBOBJS = \
+	cvtBpt.o
+
+LIBNAME = pbtLib
+
+include $(TOP)/config/RULES.Vx
+

src/bpt/bptTypeJdegC.data

@@ -0,0 +1,142 @@
+!header
+"typeJdegC" 0 0 700 4095 .5 -210 760 1
+!data
+
+-8.096	-8.076	-8.057	-8.037	-8.017	-7.996	-7.976	-7.955	-7.934	-7.912
+
+	
+-7.890	-7.868	-7.846	-7.824	-7.801	-7.778	-7.755	-7.731	-7.707	-7.683
+-7.659	-7.634	-7.609	-7.584	-7.559	-7.533	-7.508	-7.482	-7.455	-7.429
+-7.402	-7.375	-7.348	-7.321	-7.293	-7.265	-7.237	-7.209	-7.180	-7.151
+-7.122	-7.093	-7.064	-7.034	-7.004	-6.974	-6.944	-6.914	-6.883	-6.852
+-6.821	-6.790	-6.758	-6.727	-6.695	-6.663	-6.630	-6.598	-6.565	-6.532
+
+
+-6.499	-6.466	-6.433	-6.399	-6.365	-6.331	-6.297	-6.263	-6.228	-6.194
+-6.159	-6.124	-6.089	-6.053	-6.018	-5.982	-5.946	-5.910	-5.874	-5.837
+-5.801	-5.764	-5.727	-5.690	-5.653	-5.615	-5.578	-5.540	-5.502	-5.464
+-5.426	-5.388	-5.349	-5.311	-5.272	-5.233	-5.194	-5.155	-5.115	-5.076
+-5.036	-4.996	-4.956	-4.916	-4.876	-4.836	-4.795	-4.755	-4.714	-4.673
+
+
+-4.632	-4.591	-4.550	-4.508	-4.467	-4.425	-4.383	-4.341	-4.299	-4.257
+-4.215	-4.172	-4.130	-4.087	-4.044	-4.001	-3.958	-3.915	-3.872	-3.829
+-3.785	-3.742	-3.698	-3.654	-3.610	-3.566	-3.522	-3.478	-3.433	-3.389
+-3.344	-3.299	-3.255	-3.210	-3.165	-3.120	-3.074	-3.029	-2.984	-2.938
+-2.892	-2.847	-2.801	-2.755	-2.709	-2.663	-2.617	-2.570	-2.524	-2.478
+
+
+-2.431	-2.384	-2.338	-2.291	-2.244	-2.197	-2.150	-2.102	-2.055	-2.008
+-1.960	-1.913	-1.865	-1.818	-1.770	-1.722	-1.674	-1.626	-1.578	-1.530
+-1.481	-1.433	-1.385	-1.336	-1.288	-1.239	-1.190	-1.141	-1.093	-1.044
+-0.995	-0.945	-0.896	-0.847	-0.798	-0.748	-0.699	-0.650	-0.600	-0.550
+-0.501	-0.451	-0.401	-0.351	-0.301	-0.251	-0.201	-0.151	-0.101	-0.050
+
+
+0.0	0.050	0.101	0.151	0.202	0.253	0.303	0.354	0.405	0.456
+0.507	0.558	0.609	0.660	0.711	0.762	0.813	0.865	0.916	0.967
+1.019	1.070	1.122	1.174	1.225	1.277	1.329	1.381	1.432	1.484
+1.536	1.588	1.640	1.693	1.745	1.797	1.849	1.901	1.954	2.006
+2.058	2.111	2.163	2.216	2.268	2.321	2.374	2.426	2.479	2.532
+
+
+2.585	2.638	2.691	2.743	2.796	2.849	2.902	2.956	3.009	3.062
+3.115	3.168	3.221	3.275	3.328	3.381	3.435	3.488	3.542	3.595
+3.649	3.702	3.756	3.809	3.863	3.917	3.971	4.024	4.078	4.132
+4.186	4.239	4.293	4.347	4.401	4.455	4.509	4.563	4.617	4.671
+4.725	4.780	4.834	4.888	4.942	4.996	5.050	5.105	5.159	5.213
+
+
+5.268	5.322	5.376	5.431	5.485	5.540	5.594	5.649	5.703	5.758
+5.812	5.867	5.921	5.976	6.031	6.085	6.140	6.195	6.249	6.304
+6.359	6.414	6.468	6.523	6.578	6.633	6.688	6.742	6.797	6.852
+6.907	6.962	7.017	7.072	7.127	7.182	7.237	7.292	7.347	7.402
+7.457	7.512	7.567	7.622	7.677	7.732	7.787	7.843	7.898	7.953
+
+
+8.008	8.063	8.118	8.174	8.229	8.284	8.339	8.394	8.450	8.505
+8.560	8.616	8.671	8.726	8.781	8.837	8.892	8.947	9.003	9.058
+9.113	9.169	9.224	9.279	9.335	9.390	9.446	9.501	9.556	9.612
+9.667	9.723	9.778	9.834	9.889	9.944	10.000	10.055	10.111	10.166
+10.222	10.277	10.333	10.388	10.444	10.499	10.555	10.610	10.666	10.721
+
+
+10.777	10.832	10.888	10.943	10.999	11.054	11.110	11.165	11.221	11.276
+11.332	11.387	11.443	11.498	11.554	11.609	11.665	11.720	11.776	11.831
+11.887	11.943	11.998	12.054	12.109	12.165	12.220	12.276	12.331	12.387
+12.442	12.498	12.553	12.609	12.664	12.720	12.776	12.831	12.887	12.942
+12.998	13.053	13.109	13.164	13.220	13.275	13.331	13.386	13.442	13.497
+
+
+13.553	13.608	13.664	13.719	13.775	13.830	13.886	13.941	13.997	14.052
+14.108	14.163	14.219	14.274	14.330	14.385	14.441	14.496	14.552	14.607
+14.663	14.718	14.774	14.829	14.885	14.940	14.995	15.051	15.106	15.162
+15.217	15.273	15.328	15.383	15.439	15.494	15.550	15.605	15.661	15.716
+15.771	15.827	15.882	15.938	15.993	16.048	16.104	16.159	16.214	16.270
+
+
+16.325	16.380	16.436	16.491	16.547	16.602	16.657	16.713	16.768	16.823
+16.879	16.934	16.989	17.044	17.100	17.155	17.210	17.266	17.321	17.376
+17.432	17.487	17.542	17.597	17.653	17.708	17.763	17.818	17.874	17.929
+17.984	18.039	18.095	18.150	18.205	18.260	18.316	18.371	18.426	18.481
+18.537	18.592	18.647	18.702	18.757	18.813	18.868	18.923	18.978	19.033
+
+
+19.089	19.144	19.199	19.254	19.309	19.364	19.420	19.475	19.530	19.585
+19.640	19.695	19.751	19.806	19.861	19.916	19.971	20.026	20.081	20.137
+20.192	20.247	20.302	20.357	20.412	20.467	20.523	20.578	20.633	20.688
+20.743	20.798	20.853	20.909	20.964	21.019	21.074	21.129	21.184	21.239
+21.295	21.350	21.405	21.460	21.515	21.570	21.625	21.680	21.736	21.791
+
+
+21.846	21.901	21.956	22.011	22.066	22.122	22.177	22.232	22.287	22.342
+22.397	22.453	22.508	22.563	22.618	22.673	22.728	22.784	22.839	22.894
+22.949	23.004	23.060	23.115	23.170	23.225	23.280	23.336	23.391	23.446
+23.501	23.556	23.612	23.667	23.722	23.777	23.833	23.888	23.943	23.999
+24.054	24.109	24.164	24.220	24.275	24.330	24.386	24.441	24.496	24.552
+
+
+24.607	24.662	24.718	24.773	24.829	24.884	24.939	24.995	25.050	25.106
+25.161	25.217	25.272	25.327	25.383	25.438	25.494	25.549	25.605	25.661
+25.716	25.772	25.827	25.883	25.938	25.994	26.050	26.105	26.161	26.216
+26.272	26.328	26.383	26.439	26.495	26.551	26.606	26.662	26.718	26.774
+26.829	26.885	26.941	26.997	27.053	27.109	27.165	27.220	27.276	27.332
+
+
+27.388	27.444	27.500	27.556	27.612	27.668	27.724	27.780	27.836	27.893
+27.949	28.005	28.061	28.117	28.173	28.230	28.286	28.342	28.398	28.455
+28.511	28.567	28.624	28.680	28.736	28.793	28.849	28.906	28.962	29.019
+29.075	29.132	29.188	29.245	29.301	29.358	29.415	29.471	29.528	29.585
+29.642	29.698	29.755	29.812	29.869	29.926	29.983	30.039	30.096	30.153
+
+
+30.210	30.267	30.324	30.381	30.439	30.496	30.553	30.610	30.667	30.724
+30.782	30.839	30.896	30.954	31.011	31.068	31.126	31.183	31.241	31.298
+31.356	31.413	31.471	31.528	31.586	31.644	31.702	31.759	31.817	31.875
+31.933	31.991	32.048	32.106	32.164	32.222	32.280	32.338	32.396	32.455
+32.513	32.571	32.629	32.687	32.746	32.804	32.862	32.921	32.979	33.038
+
+
+33.096	33.155	33.213	33.272	33.330	33.389	33.448	33.506	33.565	33.624
+33.683	33.742	33.800	33.859	33.918	33.977	34.036	34.095	34.155	34.214
+34.273	34.332	34.391	34.451	34.510	34.569	34.629	34.688	34.748	34.807
+34.867	34.926	34.986	35.046	35.105	35.165	35.225	35.285	35.344	35.404
+35.464	35.524	35.584	35.644	35.704	35.764	35.825	35.885	35.945	36.005
+
+
+36.066	36.126	36.186	36.247	36.307	36.368	36.428	36.489	36.549	36.610
+36.671	36.732	36.792	36.853	36.914	36.975	37.036	37.097	37.158	37.219
+37.280	37.341	37.402	37.463	37.525	37.586	37.647	37.709	37.770	37.831
+37.893	37.954	38.016	38.078	38.139	38.201	38.262	38.324	38.386	38.448
+38.510	38.572	38.633	38.695	38.757	38.819	38.882	38.944	39.006	39.068
+
+
+39.130	39.192	39.255	39.317	39.379	39.442	39.504	39.567	39.629	39.692
+39.754	39.817	39.880	39.942	40.005	40.068	40.131	40.193	40.256	40.319
+40.382	40.445	40.508	40.571	40.634	40.697	40.760	40.823	40.886	40.950
+41.013	41.076	41.139	41.203	41.266	41.329	41.393	41.456	41.520	41.583
+41.647	41.710	41.774	41.837	41.901	41.965	42.028	42.092	42.156	42.219
+
+
+42.283	42.347	42.411	42.475	42.538	42.602	42.666	42.730	42.794	42.858
+42.922

src/bpt/bptTypeJdegF.data

@@ -0,0 +1,213 @@
+! cvtTypeJdegF.data
+"typeJdegF" 32 0 1200 4095 1.0 -350 1400 1
+!
+-8.137	-8.127	-8.117	-8.106	-8.096	-8.085	-8.074	-8.063	-8.052	-8.041
+-8.030	-8.019	-8.008	-7.996	-7.985	-7.973	-7.962	-7.950	-7.938	-7.927
+-7.915	-7.903	-7.890	-7.878	-7.866	-7.854	-7.841	-7.829	-7.816	-7.803
+-7.791	-7.778	-7.765	-7.752	-7.739	-7.726	-7.712	-7.699	-7.686	-7.672
+-7.659	-7.645	-7.631	-7.618	-7.604	-7.590	-7.576	-7.562	-7.548	-7.533
+
+-7.519	-7.505	-7.490	-7.476	-7.461	-7.447	-7.432	-7.417	-7.402	-7.387
+-7.372	-7.357	-7.342	-7.327	-7.311	-7.296	-7.281	-7.265	-7.250	-7.234
+-7.218	-7.202	-7.187	-7.171	-7.155	-7.139	-7.122	-7.106	-7.090	-7.074
+-7.057	-7.041	-7.024	-7.008	-6.991	-6.974	-6.958	-6.941	-6.924	-6.907
+-6.890	-6.873	-6.856	-6.838	-6.821	-6.804	-6.786	-6.769	-6.751	-6.734
+
+-6.716	-6.698	-6.680	-6.663	-6.645	-6.627	-6.609	-6.591	-6.572	-6.554	
+-6.536	-6.518	-6.499	-6.481	-6.462	-6.444	-6.425	-6.407	-6.388	-6.369
+-6.350	-6.331	-6.312	-6.293	-6.274	-6.255	-6.236	-6.217	-6.198	-6.178
+-6.159	-6.139	-6.120	-6.100	-6.081	-6.061	-6.041	-6.022	-6.002	-5.982
+-5.962	-5.942	-5.922	-5.902	-5.882	-5.861	-5.841	-5.821	-5.801	-5.780
+
+-5.760	-5.739	-5.719	-5.698	-5.678	-5.657	-5.636	-5.615	-5.594	-5.574
+-5.553	-5.532	-5.511	-5.490	-5.468	-5.447	-5.426	-5.405	-5.383	-5.362
+-5.341	-5.319	-5.298	-5.276	-5.255	-5.233	-5.211	-5.190	-5.168	-5.146
+-5.124	-5.102	-5.080	-5.058	-5.036	-5.014	-4.992	-4.970	-4.948	-4.925
+-4.903	-4.881	-4.858	-4.836	-4.813	-4.791	-4.768	-4.746	-4.723	-4.700
+
+-4.678	-4.655	-4.632	-4.609	-4.586	-4.563	-4.540	-4.517	-4.494	-4.471
+-4.448	-4.425	-4.402	-4.379	-4.355	-4.332	-4.309	-4.285	-4.262	-4.238
+-4.215	-4.191	-4.168	-4.144	-4.120	-4.097	-4.073	-4.049	-4.025	-4.001
+-3.978	-3.954	-3.930	-3.906	-3.882	-3.858	-3.833	-3.809	-3.785	-3.761
+-3.737	-3.712	-3.688	-3.664	-3.639	-3.615	-3.590	-3.566	-3.541	-3.517
+
+-3.492	-3.468	-3.443	-3.418	-3.394	-3.369	-3.344	-3.319	-3.294	-3.270
+-3.245	-3.220	-3.195	-3.170	-3.145	-3.120	-3.094	-3.069	-3.044	-3.019
+-2.994	-2.968	-2.943	-2.918	-2.892	-2.867	-2.842	-2.816	-2.791	-2.765
+-2.740	-2.714	-2.689	-2.663	-2.637	-2.612	-2.586	-2.560	-2.534	-2.509
+-2.483	-2.457	-2.431	-2.405	-2.379	-2.353	-2.327	-2.301	-2.275	-2.249
+
+-2.223	-2.197	-2.171	-2.144	-2.118	-2.092	-2.066	-2.039	-2.013	-1.987
+-1.960	-1.934	-1.908	-1.881	-1.855	-1.828	-1.802	-1.775	-1.748	-1.722
+-1.695	-1.669	-1.642	-1.615	-1.589	-1.562	-1.535	-1.508	-1.481	-1.455
+-1.428	-1.401	-1.374	-1.347	-1.320	-1.293	-1.266	-1.239	-1.212	-1.185
+-1.158	-1.131	-1.103	-1.076	-1.049	-1.022	-0.995	-0.967	-0.940	-0.913
+
+-0.885	-0.858	-0.831	-0.803	-0.776	-0.748	-0.721	-0.694	-0.666	-0.639
+-0.611	-0.583	-0.556	-0.528	-0.501	-0.473	-0.445	-0.418	-0.390	-0.362
+-0.334	-0.307	-0.279	-0.251	-0.223	-0.195	-0.168	-0.140	-0.112	-0.084
+-0.056	-0.028	0.000	0.028	0.056	0.084	0.112	0.140	0.168	0.196
+0.224	0.253	0.281	0.309	0.337	0.365	0.394	0.422	0.450	0.478
+
+0.507	0.535	0.563	0.592	0.620	0.648	0.677	0.705	0.734	0.762
+0.791	0.819	0.848	0.876	0.905	0.933	0.962	0.990	1.019	1.048
+1.076	1.105	1.134	1.162	1.191	1.220	1.248	1.277	1.306	1.335
+1.363	1.392	1.421	1.450	1.479	1.507	1.536	1.565	1.594	1.623
+1.652	1.681	1.710	1.739	1.768	1.797	1.826	1.855	1.884	1.913
+
+1.942	1.971	2.000	2.029	2.058	2.088	2.117	2.146	2.175	2.204
+2.233	2.263	2.292	2.321	2.350	2.380	2.409	2.438	2.467	2.497
+2.526	2.555	2.585	2.614	2.644	2.673	2.702	2.732	2.761	2.791
+2.820	2.849	2.879	2.908	2.938	2.967	2.997	3.026	3.056	3.085
+3.115	3.145	3.174	3.204	3.233	3.263	3.293	3.322	3.352	3.381
+
+3.411	3.441	3.470	3.500	3.530	3.560	3.589	3.619	3.649	3.678
+3.708	3.738	3.768	3.798	3.827	3.857	3.887	3.917	3.947	3.976
+4.006	4.036	4.066	4.096	4.126	4.156	4.186	4.216	4.245	4.275
+4.305	4.335	4.365	4.395	4.425	4.455	4.485	4.515	4.545	4.575
+4.605	4.635	4.665	4.695	4.725	4.755	4.786	4.816	4.846	4.876
+
+4.906	4.936	4.966	4.996	5.026	5.057	5.087	5.117	5.147	5.177
+5.207	5.238	5.268	5.298	5.328	5.358	5.389	5.419	5.449	5.479
+5.509	5.540	5.570	5.600	5.630	5.661	5.691	5.721	5.752	5.782
+5.812	5.843	5.873	5.903	5.934	5.964	5.994	6.025	6.055	6.085
+6.116	6.146	6.176	6.207	6.237	6.268	6.298	6.328	6.359	6.389
+
+6.420	6.450	6.481	6.511	6.541	6.572	6.602	6.633	6.663	6.694
+6.724	6.755	6.785	6.816	6.846	6.877	6.907	6.938	6.968	6.999
+7.029	7.060	7.090	7.121	7.151	7.182	7.212	7.243	7.274	7.304
+7.335	7.365	7.396	7.426	7.457	7.488	7.518	7.549	7.579	7.610
+7.641	7.671	7.702	7.732	7.763	7.794	7.824	7.855	7.885	7.916
+
+7.947	7.977	8.008	8.039	8.069	8.100	8.131	8.161	8.192	8.223
+8.253	8.284	8.315	8.345	8.376	8.407	8.437	8.468	8.499	8.530
+8.560	8.591	8.622	8.652	8.683	8.714	8.745	8.775	8.806	8.837
+8.867	8.898	8.929	8.960	8.990	9.021	9.052	9.083	9.113	9.144
+9.175	9.206	9.236	9.267	9.298	9.329	9.359	9.390	9.421	9.452
+
+9.483	9.513	9.544	9.575	9.606	9.636	9.667	9.698	9.729	9.760
+9.790	9.821	9.852	9.883	9.914	9.944	9.975	10.006	10.037	10.068
+10.098	10.129	10.160	10.191	10.222	10.252	10.283	10.314	10.345	10.376
+10.407	10.437	10.468	10.499	10.530	10.561	10.592	10.622	10.653	10.684
+10.715	10.746	10.777	10.807	10.838	10.869	10.900	10.931	10.962	10.992
+
+11.023	11.054	11.085	11.116	11.147	11.177	11.208	11.239	11.270	11.301
+11.332	11.363	11.393	11.424	11.455	11.486	11.517	11.548	11.578	11.609
+11.640	11.671	11.702	11.733	11.764	11.794	11.825	11.856	11.887	11.918
+11.949	11.980	12.010	12.041	12.072	12.103	12.134	12.165	12.196	12.226
+12.257	12.288	12.319	12.350	12.381	12.411	12.442	12.473	12.504	12.535
+
+12.566	12.597	12.627	12.658	12.689	12.720	12.751	12.782	12.813	12.843
+12.874	12.905	12.936	12.967	12.998	13.029	13.059	13.090	13.121	13.152
+13.183	13.214	13.244	13.275	13.306	13.337	13.368	13.399	13.430	13.460
+13.491	13.522	13.553	13.584	13.615	13.645	13.676	13.707	13.738	13.769
+13.800	13.830	13.861	13.892	13.923	13.954	13.985	14.015	14.046	14.077
+
+14.108	14.139	14.170	14.200	14.231	14.262	14.293	14.324	14.355	14.385
+14.416	14.447	14.478	14.509	14.539	14.570	14.601	14.632	14.663	14.694
+14.724	14.755	14.786	14.817	14.848	14.878	14.909	14.940	14.971	15.002
+15.032	15.063	15.094	15.125	15.156	15.186	15.217	15.248	15.279	15.310
+15.340	15.371	15.402	15.433	15.464	15.494	15.525	15.556	15.587	15.617
+
+15.648	15.679	15.710	15.741	15.771	15.802	15.833	15.864	15.894	15.925
+15.956	15.987	16.018	16.048	16.079	16.110	16.141	16.171	16.202	16.233
+16.264	16.294	16.325	16.356	16.387	16.417	16.448	16.479	16.510	16.540
+16.571	16.602	16.633	16.663	16.694	16.725	16.756	16.786	16.817	16.848
+16.879	16.909	16.940	16.971	17.001	17.032	17.063	17.094	17.124	17.155
+
+17.186	17.217	17.247	17.278	17.309	17.339	17.370	17.401	17.432	17.462
+17.493	17.524	17.554	17.585	17.616	17.646	17.677	17.708	17.739	17.769
+17.800	17.831	17.861	17.892	17.923	17.953	17.984	18.015	18.046	18.076	
+18.107	18.138	18.168	18.199	18.230	18.260	18.291	18.322	18.352	18.383
+18.414	18.444	18.475	18.506	18.537	18.567	18.598	18.629	18.659	18.690
+
+18.721	18.751	18.782	18.813	18.843	18.874	18.905	18.935	18.966	18.997
+19.027	19.058	19.089	19.119	19.150	19.180	19.211	19.242	19.272	19.303
+19.334	19.364	19.395	19.426	19.456	19.487	19.518	19.548	19.579	19.610
+19.640	19.671	19.702	19.732	19.763	19.793	19.824	19.855	19.885	19.916
+19.947	19.977	20.008	20.039	20.069	20.100	20.131	20.161	20.192	20.222
+
+20.253	20.284	20.314	20.345	20.376	20.406	20.437	20.467	20.498	20.529
+20.559	20.590	20.621	20.651	20.682	20.713	20.743	20.774	20.804	20.835
+20.866	20.896	20.927	20.958	20.988	21.019	21.049	21.080	21.111	21.141
+21.172	21.203	21.233	21.264	21.295	21.325	21.356	21.386	21.417	21.448
+21.478	21.509	21.540	21.570	21.601	21.631	21.662	21.693	21.723	21.754
+
+21.785	21.815	21.846	21.877	21.907	21.938	21.968	21.999	22.030	22.060
+22.091	22.122	22.152	22.183	22.214	22.244	22.275	22.305	22.336	22.367
+22.397	22.428	22.459	22.489	22.520	22.551	22.581	22.612	22.643	22.673
+22.704	22.735	22.765	22.796	22.826	22.857	22.888	22.918	22.949	22.980
+23.010	23.041	23.072	23.102	23.133	23.164	23.194	23.225	23.256	23.286
+
+23.317	23.348	23.378	23.409	23.440	23.471	23.501	23.532	23.563	23.593
+23.624	23.655	23.685	23.716	23.747	23.777	23.808	23.839	23.870	23.900
+23.931	23.962	23.992	24.023	24.054	24.085	24.115	24.146	24.177	24.207
+24.238	24.269	24.300	24.330	24.361	24.392	24.423	24.453	24.484	24.515
+24.546	24.576	24.607	24.638	24.669	24.699	24.730	24.761	24.792	24.822
+
+24.853	24.854	24.915	24.946	24.976	25.007	25.038	25.069	25.099	25.130
+25.161	25.192	25.223	25.254	25.284	25.315	25.346	25.377	25.408	25.438
+25.469	25.500	25.531	25.562	25.593	25.623	25.654	25.685	25.716	25.747
+25.778	25.809	25.840	25.870	25.901	25.932	25.963	25.994	26.025	26.056
+26.087	26.118	26.148	26.179	26.210	26.241	26.272	26.303	26.334	26.365
+
+26.396	26.427	26.458	26.489	26.520	26.551	26.582	26.613	26.644	26.675
+26.705	26.736	26.767	26.798	26.829	26.860	26.891	26.922	26.954	26.985
+27.016	27.047	27.078	27.109	27.140	27.171	27.202	27.233	27.264	27.295
+27.326	27.357	27.388	27.419	27.450	27.482	27.513	27.544	27.575	27.606
+27.637	27.668	27.699	27.731	27.762	27.793	27.824	27.855	27.886	27.917
+
+27.949	27.980	28.011	28.042	28.073	28.105	28.136	28.167	28.198	28.230
+28.261	28.292	28.323	28.355	28.386	28.417	28.448	28.480	28.511	28.542
+28.573	28.605	28.636	28.667	28.699	28.730	28.761	28.793	28.824	28.855
+28.887	28.918	28.950	28.981	29.012	29.044	29.075	29.107	29.138	29.169
+29.201	29.232	29.264	29.295	29.327	29.358	29.390	29.421	29.452	29.484
+
+29.515	29.547	29.578	29.610	29.642	29.673	29.705	29.736	29.768	29.799
+29.831	29.862	29.894	29.926	29.957	29.989	30.020	30.052	30.084	30.115
+30.147	30.179	30.210	30.242	30.274	30.305	30.337	30.369	30.400	30.432
+30.464	30.496	30.527	30.559	30.591	30.623	30.654	30.686	30.718	30.750
+30.782	30.813	30.845	30.877	30.909	30.941	30.973	31.005	31.036	31.068
+
+31.100	31.132	31.164	31.196	31.228	31.260	31.292	31.324	31.356	31.388
+31.420	31.452	31.484	31.516	31.548	31.580	31.612	31.644	31.676	31.708
+31.740	31.772	31.804	31.836	31.868	31.901	31.933	31.965	31.997	32.029
+32.061	32.094	32.126	32.158	32.190	32.222	32.255	32.287	32.319	32.351
+32.384	32.416	32.448	32.480	32.513	32.545	32.577	32.610	32.642	32.674
+
+32.707	32.739	32.772	32.804	32.836	32.869	32.901	32.934	32.966	32.999
+33.031	33.064	33.096	33.129	33.161	33.194	33.226	33.259	33.291	33.324
+33.356	33.389	33.422	33.454	33.487	33.519	33.552	33.585	33.617	33.650
+33.683	33.715	33.748	33.781	33.814	33.846	33.879	33.912	33.945	33.977
+34.010	34.043	34.076	34.109	34.141	34.174	34.207	34.240	34.273	34.306
+
+34.339	34.372	34.405	34.437	34.470	34.503	34.536	34.569	34.602	34.635
+34.668	34.701	34.734	34.767	34.801	34.834	34.867	34.900	34.933	34.966
+34.999	35.032	35.065	35.099	35.132	35.165	35.198	35.231	35.265	35.298
+35.331	35.364	35.398	35.431	35.464	35.498	35.531	35.564	35.598	35.631
+35.664	35.698	35.731	35.764	35.798	35.831	35.865	35.898	35.932	35.965
+
+35.999	36.032	36.066	36.099	36.133	36.166	36.200	36.233	36.267	36.301
+36.334	36.368	36.401	36.435	36.469	36.502	36.536	36.570	36.603	36.637
+36.671	36.705	36.738	36.772	36.806	36.840	36.873	36.907	36.941	36.975
+37.009	37.043	37.076	37.110	37.144	37.178	37.212	37.246	37.280	37.314
+37.348	37.382	37.416	37.450	37.484	37.518	37.552	37.586	37.620	37.654
+
+37.688	37.722	37.756	37.790	37.825	37.859	37.893	37.927	37.961	37.995
+38.030	38.064	38.098	38.132	38.167	38.201	38.235	38.269	38.304	38.338
+38.372	38.407	38.441	38.475	38.510	38.544	38.578	38.613	38.647	38.682
+38.716	38.751	38.785	38.819	38.854	38.888	38.923	38.957	38.992	39.027
+39.061	39.096	39.130	39.165	39.199	39.234	39.269	39.303	39.338	39.373
+
+39.407	39.442	39.477	39.511	39.546	39.581	39.615	39.650	39.685	39.720
+39.754	39.789	39.824	39.859	39.894	39.928	39.963	39.998	40.033	40.068
+40.103	40.138	40.172	40.207	40.242	40.277	40.312	40.347	40.382	40.417
+40.452	40.487	40.522	40.557	40.592	40.627	40.662	40.697	40.732	40.767
+40.802	40.837	40.872	40.908	40.943	40.978	41.013	41.048	41.083	41.118	
+
+41.154	41.189	41.224	41.259	41.294	41.329	41.365	41.400	41.435	41.470
+41.506	41.541	41.576	41.611	41.647	41.682	41.717	41.753	41.788	41.823
+41.859	41.894	41.929	41.965	42.000	42.035	42.071	42.106	42.142	42.177
+42.212	42.248	42.283	42.319	42.354	42.390	42.425	42.460	42.496	42.531
+42.567	42.602	42.638	42.673	42.709	42.744	42.780	42.815	42.851	42.886
+42.922

src/bpt/bptTypeKdegC.data

@@ -0,0 +1,201 @@
+! cvtTypeKdegC.data
+"typeKdegC" 0 0 1000 4095 .5 -270 1372 1
+!
+-6.458	-6.457	-6.456	-6.455	-6.453	-6.452	-6.450	-6.448	-6.446	-6.444
+-6.441	-6.438	-6.435	-6.432	-6.429	-6.425	-6.421	-6.417	-6.413	-6.408
+
+-6.404	-6.399	-6.394	-6.388	-6.382	-6.377	-6.371	-6.364	-6.358	-6.351
+-6.344	-6.337	-6.329	-6.322	-6.314	-6.306	-6.297	-6.289	-6.280	-6.271
+-6.262	-6.253	-6.243	-6.233	-6.223	-6.213	-6.202	-6.192	-6.181	-6.170
+-6.158	-6.147	-6.135	-6.123	-6.111	-6.099	-6.087	-6.074	-6.061	-6.048
+-6.035	-6.021	-6.007	-5.994	-5.980	-5.965	-5.951	-5.936	-5.922	-5.907
+
+-5.891	-5.876	-5.860	-5.845	-5.829	-5.813	-5.796	-5.780	-5.763	-5.747
+-5.730	-5.712	-5.695	-5.678	-5.660	-5.642	-5.624	-5.606	-5.587	-5.569
+-5.550	-5.531	-5.512	-5.493	-5.474	-5.454	-5.434	-5.414	-5.394	-5.374
+-5.354	-5.333	-5.313	-5.292	-5.271	-5.249	-5.228	-5.207	-5.185	-5.163
+-5.141	-5.119	-5.097	-5.074	-5.051	-5.029	-5.006	-4.983	-4.959	-4.936
+
+-4.912	-4.889	-4.865	-4.841	-4.817	-4.792	-4.768	-4.743	-4.719	-4.694
+-4.669	-4.644	-4.618	-4.593	-4.567	-4.541	-4.515	-4.489	-4.463	-4.437
+-4.410	-4.384	-4.357	-4.330	-4.303	-4.276	-4.248	-4.221	-4.193	-4.166
+-4.138	-4.110	-4.082	-4.053	-4.025	-3.997	-3.968	-3.939	-3.910	-3.881
+-3.852	-3.823	-3.793	-3.764	-3.734	-3.704	-3.674	-3.644	-3.614	-3.584
+
+-3.553	-3.523	-3.492	-3.461	-3.430	-3.399	-3.368	-3.337	-3.305	-3.274
+-3.242	-3.211	-3.179	-3.147	-3.115	-3.082	-3.050	-3.018	-2.985	-2.953
+-2.920	-2.887	-2.854	-2.821	-2.788	-2.754	-2.721	-2.687	-2.654	-2.620
+-2.586	-2.552	-2.518	-2.484	-2.450	-2.416	-2.381	-2.347	-2.312	-2.277
+-2.243	-2.208	-2.173	-2.137	-2.102	-2.067	-2.032	-1.996	-1.961	-1.925
+
+-1.889	-1.853	-1.817	-1.781	-1.745	-1.709	-1.673	-1.636	-1.600	-1.563
+-1.527	-1.490	-1.453	-1.416	-1.379	-1.342	-1.305	-1.268	-1.231	-1.193
+-1.156	-1.118	-1.081	-1.043	-1.005	-0.968	-0.930	-0.892	-0.854	-0.816
+-0.777	-0.739	-0.701	-0.662	-0.624	-0.585	-0.547	-0.508	-0.469	-0.431
+-0.392	-0.353	-0.314	-0.275	-0.236	-0.197	-0.157	-0.118	-0.079	-0.039
+
+0.000	0.039	0.079	0.119	0.158	0.198	0.238	0.277	0.317	0.357
+0.397	0.437	0.477	0.517	0.557	0.597	0.637	0.677	0.718	0.758
+0.798	0.838	0.879	0.919	0.960	1.000	1.041	1.081	1.122	1.162
+1.203	1.244	1.285	1.325	1.366	1.407	1.448	1.489	1.529	1.570
+1.611	1.652	1.693	1.734	1.776	1.817	1.858	1.899	1.940	1.981
+
+2.022	2.064	2.105	2.146	2.188	2.229	2.270	2.312	2.353	2.394
+2.436	2.477	2.519	2.560	2.601	2.643	2.684	2.726	2.767	2.809
+2.850	2.892	2.933	2.975	3.016	3.058	3.100	3.141	3.183	3.224
+3.266	3.307	3.349	3.390	3.432	3.473	3.515	3.556	3.598	3.639
+3.681	3.722	3.764	3.805	3.847	3.888	3.930	3.971	4.012	4.054
+
+4.095	4.137	4.178	4.219	4.261	4.302	4.343	4.384	4.426	4.467
+4.508	4.549	4.590	4.632	4.673	4.714	4.755	4.796	4.837	4.878
+4.919	4.960	5.001	5.042	5.083	5.124	5.164	5.205	5.246	5.287
+5.327	5.368	5.409	5.450	5.490	5.531	5.571	5.612	5.652	5.693
+5.733	5.774	5.814	5.855	5.895	5.936	5.976	6.016	6.057	6.097
+
+6.137	6.177	6.218	6.258	6.298	6.338	6.378	6.419	6.459	6.499
+6.539	6.579	6.619	6.659	6.699	6.739	6.779	6.819	6.859	6.899
+6.939	6.979	7.019	7.059	7.099	7.139	7.179	7.219	7.259	7.299
+7.338	7.378	7.418	7.458	7.498	7.538	7.578	7.618	7.658	7.697
+7.737	7.777	7.817	7.857	7.897	7.937	7.977	8.017	8.057	8.097
+
+8.137	8.177	8.216	8.256	8.296	8.336	8.376	8.416	8.456	8.497
+8.537	8.577	8.617	8.657	8.697	8.737	8.777	8.817	8.857	8.898
+8.938	8.978	9.018	9.058	9.099	9.139	9.179	9.220	9.260	9.300
+9.341	9.381	9.421	9.462	9.502	9.543	9.583	9.624	9.664	9.705
+9.745	9.786	9.826	9.867	9.907	9.948	9.989	10.029	10.070	10.111
+
+10.151	10.192	10.233	10.274	10.315	10.355	10.396	10.437	10.478	10.519
+10.560	10.600	10.641	10.682	10.723	10.764	10.805	10.846	10.887	10.928
+10.969	11.010	11.051	11.093	11.134	11.175	11.216	11.257	11.298	11.339
+11.381	11.422	11.463	11.504	11.546	11.587	11.628	11.669	11.711	11.752
+11.793	11.835	11.876	11.918	11.959	12.000	12.042	12.083	12.125	12.166
+
+12.207	12.249	12.290	12.332	12.373	12.415	12.456	12.498	12.539	12.581
+12.623	12.664	12.706	12.747	12.789	12.831	12.872	12.914	12.955	12.997
+13.039	13.080	13.122	13.164	13.205	13.247	13.289	13.331	13.372	13.414
+13.456	13.497	13.539	13.581	13.623	13.665	13.706	13.748	13.790	13.832
+13.874	13.915	13.957	13.999	14.041	14.083	14.125	14.167	14.208	14.250
+
+14.292	14.334	14.376	14.418	14.460	14.502	14.544	14.586	14.628	14.670
+14.712	14.754	14.796	14.838	14.880	14.922	14.964	15.006	15.048	15.090
+15.132	15.174	15.216	15.258	15.300	15.342	15.384	15.426	15.468	15.510
+15.552	15.594	15.636	15.679	15.721	15.763	15.805	15.847	15.889	15.931
+15.974	16.016	16.058	16.100	16.142	16.184	16.227	16.269	16.311	16.353
+
+16.395	16.438	16.480	16.522	16.564	16.607	16.649	16.691	16.733	16.776
+16.818	16.860	16.902	16.945	16.987	17.029	17.072	17.114	17.156	17.199
+17.241	17.283	17.326	17.368	17.410	17.453	17.495	17.537	17.580	17.622
+17.664	17.707	17.749	17.792	17.834	17.876	17.919	17.961	18.004	18.046
+18.088	18.131	18.173	18.216	18.258	18.301	18.343	18.385	18.428	18.470
+
+18.513	18.555	18.598	18.640	18.683	18.725	18.768	18.810	18.853	18.895
+18.938	18.980	19.023	19.065	19.108	19.150	19.193	19.235	19.278	19.320
+19.363	19.405	19.448	19.490	19.533	19.576	19.618	19.661	19.703	19.746
+19.788	19.831	19.873	19.916	19.959	20.001	20.044	20.086	20.129	20.172
+20.214	20.257	20.299	20.342	20.385	20.427	20.470	20.512	20.555	20.598
+
+20.640	20.683	20.725	20.768	20.811	20.853	20.896	20.938	20.981	21.024
+21.066	21.109	21.152	21.194	21.237	21.280	21.322	21.365	21.407	21.450
+21.493	21.535	21.578	21.621	21.663	21.706	21.749	21.791	21.834	21.876
+21.919	21.962	22.004	22.047	22.090	22.132	22.175	22.218	22.260	22.303
+22.346	22.388	22.431	22.473	22.516	22.559	22.601	22.644	22.687	22.729
+
+22.772	22.815	22.857	22.900	22.942	22.985	23.028	23.070	23.113	23.156
+23.198	23.241	23.284	23.326	23.369	23.411	23.454	23.497	23.539	23.582
+23.624	23.667	23.710	23.752	23.795	23.837	23.880	23.923	23.965	24.008
+24.050	24.093	24.136	24.178	24.221	24.263	24.306	24.348	24.391	24.434
+24.476	24.519	24.561	24.604	24.646	24.689	24.731	24.774	24.817	24.859
+
+24.902	24.944	24.987	25.029	25.072	25.114	25.157	25.199	25.242	25.284
+25.327	25.369	25.412	25.454	25.497	25.539	25.582	25.624	25.666	25.709
+25.751	25.794	25.836	25.879	25.921	25.964	26.006	26.048	26.091	26.133
+26.176	26.218	26.260	26.303	26.345	26.387	26.430	26.472	26.515	26.557
+26.599	26.642	26.684	26.726	26.769	26.811	26.853	26.896	26.938	26.980
+
+27.022	27.065	27.107	27.149	27.192	27.234	27.276	27.318	27.361	27.403
+27.445	27.487	27.529	27.572	27.614	27.656	27.698	27.740	27.783	27.825
+27.867	27.909	27.951	27.993	28.035	28.078	28.120	28.162	28.204	28.246
+28.288	28.330	28.372	28.414	28.456	28.498	28.540	28.583	28.625	28.667
+28.709	28.751	28.793	28.835	28.877	28.919	28.961	29.002	29.044	29.086
+
+29.128	29.170	29.212	29.254	29.296	29.338	29.380	29.422	29.464	29.505
+29.547	29.589	29.631	29.673	29.715	29.756	29.798	29.840	29.882	29.924
+29.965	30.007	30.049	30.091	30.132	30.174	30.216	30.257	30.299	30.341
+30.383	30.424	30.466	30.508	30.549	30.591	30.632	30.674	30.716	30.757
+30.799	30.840	30.882	30.924	30.965	31.007	31.048	31.090	31.131	31.173
+
+31.214	31.256	31.297	31.339	31.380	31.422	31.463	31.504	31.546	31.587
+31.629	31.670	31.712	31.753	31.794	31.836	31.877	31.918	31.960	32.001
+32.042	32.084	32.125	32.166	32.207	32.249	32.290	32.331	32.372	32.414
+32.455	32.496	32.537	32.578	32.619	32.661	32.702	32.743	32.784	32.825
+32.866	32.907	32.948	32.990	33.031	33.072	33.113	33.154	33.195	33.236
+
+33.277	33.318	33.359	33.400	33.441	33.482	33.523	33.564	33.604	33.645
+33.686	33.727	33.768	33.809	33.850	33.891	33.931	33.972	34.013	34.054
+34.095	34.136	34.176	34.217	34.258	34.299	34.339	34.380	34.421	34.461
+34.502	34.543	34.583	34.624	34.665	34.705	34.746	34.787	34.827	34.868
+34.909	34.949	34.990	35.030	35.071	35.111	35.152	35.192	35.233	35.273
+
+35.314	35.354	35.395	35.435	35.476	35.516	35.557	35.597	35.637	35.678
+35.718	35.758	35.799	35.839	35.880	35.920	35.960	36.000	36.041	36.081
+36.121	36.162	36.202	36.242	36.282	36.323	36.363	36.403	36.443	36.483
+36.524	36.564	36.604	36.644	36.684	36.724	36.764	36.804	36.844	36.885
+36.925	36.965	37.005	37.045	37.085	37.125	37.165	37.205	37.245	37.285
+
+37.325	37.365	37.405	37.445	37.484	37.524	37.564	37.604	37.644	37.684
+37.724	37.764	37.803	37.843	37.883	37.923	37.963	38.002	38.042	38.082
+38.122	38.162	38.201	38.241	38.281	38.320	38.360	38.400	38.439	38.479
+38.519	38.558	38.598	38.638	38.677	38.717	38.756	38.796	38.836	38.875
+38.915	38.954	38.994	39.033	39.073	39.112	39.152	39.191	39.231	39.270
+
+39.310	39.349	39.388	39.428	39.467	39.507	39.546	39.585	39.625	39.644
+39.703	39.743	39.782	39.821	39.861	39.900	39.939	39.979	40.018	40.057
+40.096	40.136	40.175	40.214	40.253	40.292	40.332	40.371	40.410	40.449
+40.488	40.527	40.566	40.605	40.645	40.684	40.723	40.762	40.801	40.840
+40.879	40.918	40.957	40.996	41.035	41.074	41.113	41.152	41.191	41.230
+
+41.269	41.308	41.347	41.385	41.424	41.463	41.502	41.541	41.580	41.619
+41.657	41.696	41.735	41.774	41.813	41.851	41.890	41.929	41.968	42.006
+42.045	42.084	42.123	42.161	42.200	42.239	42.277	42.316	42.355	42.393
+42.432	42.470	42.509	42.548	42.586	42.625	42.663	42.702	42.740	42.779
+42.817	42.856	42.894	42.933	42.971	43.010	43.048	43.087	43.125	43.164
+
+43.202	43.240	43.279	43.317	43.356	43.394	43.432	43.471	43.509	43.547
+43.585	43.624	43.662	43.700	43.739	43.777	43.815	43.853	43.891	43.930
+43.968	44.006	44.044	44.082	44.121	44.159	44.197	44.235	44.273	44.311
+44.349	44.387	44.425	44.463	44.501	44.539	44.577	44.615	44.653	44.691
+44.729	44.767	44.805	44.843	44.881	44.919	44.957	44.995	45.033	45.070
+
+45.108	45.146	45.184	45.222	45.260	45.297	45.335	45.373	45.411	45.448
+45.486	45.524	45.561	45.599	45.637	45.675	45.712	45.750	45.787	45.825
+45.863	45.900	45.938	45.975	46.013	46.051	46.088	46.126	46.163	46.201
+46.238	46.275	46.313	46.350	46.388	46.425	46.463	46.500	46.537	46.575
+46.612	46.649	46.687	46.724	46.761	46.799	46.836	46.873	46.910	46.948
+
+46.985	47.022	47.059	47.096	47.134	47.171	47.208	47.245	47.282	47.319
+47.356	47.393	47.430	47.468	47.505	47.542	47.579	47.616	47.653	47.689
+47.726	47.763	47.800	47.837	47.874	47.911	47.948	47.985	48.021	48.058
+48.095	48.132	48.169	48.205	48.242	48.279	48.316	48.352	48.389	48.426
+48.462	48.499	48.536	48.572	48.609	48.645	48.682	48.718	48.755	48.792
+
+48.828	48.865	48.901	48.937	48.974	49.010	49.047	49.083	49.120	49.156
+49.192	49.229	49.265	49.301	49.338	49.374	49.410	49.446	49.483	49.519
+49.555	49.591	49.627	49.663	49.700	49.736	49.772	49.808	49.844	49.880
+49.916	49.952	49.988	50.024	50.060	50.096	50.132	50.168	50.204	50.240
+50.276	50.311	50.347	50.383	50.419	50.455	50.491	50.526	50.562	50.598
+
+50.633	50.669	50.705	50.741	50.776	50.812	50.847	50.883	50.919	50.954
+50.990	51.025	51.061	51.096	51.132	51.167	51.203	51.238	51.274	51.309
+51.344	51.380	51.415	51.450	51.486	51.521	51.556	51.592	51.627	51.662
+51.697	51.733	51.768	51.803	51.838	51.873	51.908	51.943	51.979	52.014
+52.049	52.084	52.119	52.154	52.189	52.224	52.259	52.294	52.329	52.364
+
+52.398	52.433	52.468	52.503	52.538	52.573	52.608	52.642	52.677	52.712
+52.747	52.781	52.816	52.851	52.886	52.920	52.955	52.989	53.024	53.059
+53.093	53.128	53.162	53.197	53.232	53.266	53.301	53.335	53.370	53.404
+53.439	53.473	53.507	53.542	53.576	53.611	53.645	53.679	53.714	53.748
+53.782	53.817	53.851	53.885	53.920	53.954	53.988	54.022	54.057	54.091
+
+54.125	54.159	54.193	54.228	54.262	54.296	54.330	54.364	54.398	54.432
+54.466	54.501	54.535	54.569	54.603	54.637	54.671	54.705	54.739	54.773
+54.807	54.841	54.875

src/bpt/bptTypeKdegF.data

@@ -0,0 +1,360 @@
+! cvtTypeKdegF.data
+"typeKdegF" 32 0 1832 4095 1.0 -454 2500 1
+!
+						-6.458	-6.457	-6.457	-6.456
+	
+-6.456	-6.455	-6.454	-6.454	-6.453	-6.452	-6.451	-6.450	-6.449	-6.448
+-6.447	-6.445	-6.444	-6.443	-6.441	-6.440	-6.438	-6.436	-6.435	-6.433
+-6.431	-6.429	-6.427	-6.425	-6.423	-6.421	-6.419	-6.416	-6.414	-6.411
+-6.409	-6.406	-6.404	-6.401	-6.398	-6.395	-6.392	-6.389	-6.386	-6.383
+-6.380	-6.377	-6.373	-6.370	-6.366	-6.363	-6.359	-6.355	-6.352	-6.348
+
+-6.344	-6.340	-6.336	-6.332	-6.328	-6.323	-6.319	-6.315	-6.310	-6.306
+-6.301	-6.296	-6.292	-6.287	-6.282	-6.277	-6.272	-6.267	-6.262	-6.257
+-6.251	-6.246	-6.241	-6.235	-6.230	-6.224	-6.219	-6.213	-6.207	-6.201
+-6.195	-6.189	-6.183	-6.177	-6.171	-6.165	-6.158	-6.152	-6.146	-6.139
+-6.133	-6.126	-6.119	-6.113	-6.106	-6.099	-6.092	-6.085	-6.078	-6.071
+
+-6.064	-6.057	-6.049	-6.042	-6.035	-6.027	-6.020	-6.012	-6.004	-5.997
+-5.989	-5.981	-5.973	-5.965	-5.957	-5.949	-5.941	-5.933	-5.925	-5.917
+-5.908	-5.900	-5.891	-5.883	-5.874	-5.866	-5.857	-5.848	-5.839	-5.831
+-5.822	-5.813	-5.804	-5.795	-5.786	-5.776	-5.767	-5.758	-5.748	-5.739
+-5.730	-5.720	-5.711	-5.701	-5.691	-5.682	-5.672	-5.662	-5.652	-5.642
+
+-5.632	-5.622	-5.612	-5.602	-5.592	-5.581	-5.571	-5.561	-5.550	-5.540
+-5.529	-5.519	-5.508	-5.497	-5.487	-5.476	-5.465	-5.454	-5.443	-5.432
+-5.421	-5.410	-5.399	-5.388	-5.376	-5.365	-5.354	-5.342	-5.331	-5.319
+-5.308	-5.296	-5.285	-5.273	-5.261	-5.249	-5.238	-5.226	-5.214	-5.202
+-5.190	-5.178	-5.165	-5.153	-5.141	-5.129	-5.116	-5.104	-5.092	-5.079
+
+-5.067	-5.054	-5.041	-5.029	-5.016	-5.003	-4.990	-4.978	-4.965	-4.952
+-4.939	-4.926	-4.912	-4.899	-4.886	-4.873	-4.860	-4.846	-4.833	-4.819
+-4.806	-4.792	-4.779	-4.765	-4.752	-4.738	-4.724	-4.710	-4.697	-4.683
+-4.669	-4.655	-4.641	-4.627	-4.613	-4.598	-4.584	-4.570	-4.556	-4.541
+-4.527	-4.512	-4.498	-4.484	-4.469	-4.454	-4.440	-4.425	-4.410	-4.396
+
+-4.381	-4.366	-4.351	-4.336	-4.321	-4.306	-4.291	-4.276	-4.261	-4.245
+-4.230	-4.215	-4.200	-4.184	-4.169	-4.153	-4.138	-4.122	-4.107	-4.091
+-4.075	-4.060	-4.044	-4.028	-4.012	-3.997	-3.981	-3.965	-3.949	-3.933
+-3.917	-3.901	-3.884	-3.868	-3.852	-3.836	-3.819	-3.803	-3.787	-3.770
+-3.754	-3.737	-3.721	-3.704	-3.688	-3.671	-3.654	-3.637	-3.621	-3.604
+
+-3.587	-3.570	-3.553	-3.536	-3.519	-3.502	-3.485	-3.468	-3.451	-3.434
+-3.417	-3.399	-3.382	-3.365	-3.347	-3.330	-3.312	-3.295	-3.277	-3.260
+-3.242	-3.225	-3.207	-3.189	-3.172	-3.154	-3.136	-3.118	-3.100	-3.082
+-3.065	-3.047	-3.029	-3.010	-2.992	-2.974	-2.956	-2.938	-2.920	-2.902
+-2.883	-2.865	-2.847	-2.828	-2.810	-2.791	-2.773	-2.754	-2.736	-2.717
+
+-2.699	-2.680	-2.661	-2.643	-2.624	-2.605	-2.586	-2.567	-2.549	-2.530
+-2.511	-2.492	-2.473	-2.454	-2.435	-2.416	-2.397	-2.377	-2.358	-2.339
+-2.320	-2.300	-2.281	-2.262	-2.243	-2.223	-2.204	-2.184	-2.165	-2.145
+-2.126	-2.106	-2.087	-2.067	-2.047	-2.028	-2.008	-1.988	-1.968	-1.949
+-1.929	-1.909	-1.889	-1.869	-1.849	-1.829	-1.809	-1.789	-1.769	-1.749
+
+-1.729	-1.709	-1.689	-1.669	-1.648	-1.628	-1.608	-1.588	-1.567	-1.547
+-1.527	-1.506	-1.486	-1.465	-1.445	-1.424	-1.404	-1.383	-1.363	-1.342
+-1.322	-1.301	-1.280	-1.260	-1.239	-1.218	-1.197	-1.177	-1.156	-1.135
+-1.114	-1.093	-1.072	-1.051	-1.031	-1.010	-0.989	-0.968	-0.946	-0.925
+-0.904	-0.883	-0.862	-0.841	-0.820	-0.799	-0.777	-0.756	-0.735	-0.714
+
+-0.692	-0.671	-0.650	-0.628	-0.607	-0.585	-0.564	-0.543	-0.521	-0.500
+-0.478	-0.457	-0.435	-0.413	-0.392	-0.370	-0.349	-0.327	-0.305	-0.284
+-0.262	-0.240	-0.218	-0.197	-0.175	-0.153	-0.131	-0.109	-0.088	-0.066
+-0.044	-0.022	0.000	0.022	0.044	0.066	0.088	0.110	0.132	0.154
+0.176	0.198	0.220	0.242	0.264	0.286	0.308	0.331	0.353	0.375
+
+0.397	0.419	0.441	0.464	0.486	0.508	0.530	0.553	0.575	0.597
+0.619	0.642	0.664	0.686	0.709	0.731	0.753	0.776	0.798	0.821
+0.843	0.865	0.888	0.910	0.933	0.955	0.978	1.000	1.023	1.045
+1.068	1.090	1.113	1.135	1.158	1.181	1.203	1.226	1.248	1.271
+1.294	1.316	1.339	1.362	1.384	1.407	1.430	1.452	1.475	1.498
+
+1.520	1.543	1.566	1.589	1.611	1.634	1.657	1.680	1.703	1.725
+1.748	1.771	1.794	1.817	1.839	1.862	1.885	1.908	1.931	1.954
+1.977	2.000	2.022	2.045	2.068	2.091	2.114	2.137	2.160	2.183
+2.206	2.229	2.252	2.275	2.298	2.321	2.344	2.367	2.390	2.413
+2.436	2.459	2.482	2.505	2.528	2.551	2.574	2.597	2.620	2.643
+
+2.666	2.689	2.712	2.735	2.758	2.781	2.804	2.827	2.850	2.873
+2.896	2.920	2.943	2.966	2.989	3.012	3.035	3.058	3.081	3.104
+3.127	3.150	3.173	3.196	3.220	3.243	3.266	3.289	3.312	3.335
+3.358	3.381	3.404	3.427	3.450	3.473	3.496	3.519	3.543	3.566
+3.589	3.612	3.635	3.658	3.681	3.704	3.727	3.750	3.773	3.796
+
+3.819	3.842	3.865	3.888	3.911	3.934	3.957	3.980	4.003	4.026
+4.049	4.072	4.095	4.118	4.141	4.164	4.187	4.210	4.233	4.256
+4.279	4.302	4.325	4.348	4.371	4.394	4.417	4.439	4.462	4.485
+4.508	4.531	4.554	4.577	4.600	4.622	4.645	4.668	4.691	4.714
+4.737	4.759	4.782	4.805	4.828	4.851	4.873	4.896	4.919	4.942
+
+4.964	4.987	5.010	5.033	5.055	5.078	5.101	5.124	5.146	5.169
+5.192	5.214	5.237	5.260	5.282	5.305	5.327	5.350	5.373	5.395
+5.418	5.440	5.463	5.486	5.508	5.531	5.553	5.576	5.598	5.621
+5.643	5.666	5.688	5.711	5.733	5.756	5.778	5.801	5.823	5.846
+5.868	5.891	5.913	5.936	5.958	5.980	6.003	6.025	6.048	6.070
+
+6.092	6.115	6.137	6.160	6.182	6.204	6.227	6.249	6.271	6.294
+6.316	6.338	6.361	6.383	6.405	6.428	6.450	6.472	6.494	6.517
+6.539	6.561	6.583	6.606	6.628	6.650	6.672	6.695	6.717	6.739
+6.761	6.784	6.806	6.828	6.850	6.873	6.895	6.917	6.939	6.961
+6.984	7.006	7.028	7.050	7.072	7.094	7.117	7.139	7.161	7.183
+
+7.205	7.228	7.250	7.272	7.294	7.316	7.338	7.361	7.383	7.405
+7.427	7.449	7.471	7.494	7.516	7.538	7.560	7.582	7.604	7.627
+7.649	7.671	7.693	7.715	7.737	7.760	7.782	7.804	7.826	7.848
+7.870	7.893	7.915	7.937	7.959	7.981	8.003	8.026	8.048	8.070	
+8.092	8.114	8.137	8.159	8.181	8.203	8.225	8.248	8.270	8.292
+
+8.314	8.336	8.359	8.381	8.403	8.425	8.448	8.470	8.492	8.514
+8.537	8.559	8.581	8.603	8.626	8.648	8.670	8.692	8.715	8.737
+8.759	8.782	8.804	8.826	8.849	8.871	8.893	8.916	8.938	8.960
+8.983	9.005	9.027	9.050	9.072	9.094	9.117	9.139	9.161	9.184
+9.206	9.229	9.251	9.273	9.296	9.318	9.341	9.363	9.385	9.408
+
+9.430	9.453	9.475	9.498	9.520	9.543	9.565	9.588	9.610	9.633
+9.655	9.678	9.700	9.723	9.745	9.768	9.790	9.813	9.835	9.858
+9.880	9.903	9.926	9.948	9.971	9.993	10.016	10.038	10.061	10.084	
+10.106	10.129	10.151	10.174	10.197	10.219	10.242	10.265	10.287	10.310
+10.333	10.355	10.378	10.401	10.423	10.446	10.469	10.491	10.514	10.537
+
+10.560	10.582	10.605	10.628	10.650	10.673	10.696	10.719	10.741	10.764
+10.787	10.810	10.833	10.855	10.878	10.901	10.924	10.947	10.969	10.992
+11.015	11.038	11.061	11.083	11.106	11.129	11.152	11.175	11.198	11.221
+11.243	11.266	11.289	11.312	11.335	11.358	11.381	11.404	11.426	11.449
+11.472	11.495	11.518	11.541	11.564	11.587	11.610	11.633	11.656	11.679
+
+11.702	11.725	11.748	11.770	11.793	11.816	11.839	11.862	11.885	11.908
+11.931	11.954	11.977	12.000	12.023	12.046	12.069	12.092	12.115	12.138
+12.161	12.184	12.207	12.230	12.254	12.277	12.300	12.323	12.346	12.369
+12.392	12.415	12.438	12.461	12.484	12.507	12.530	12.553	12.576	12.599
+12.623	12.646	12.669	12.692	12.715	12.738	12.761	12.784	12.807	12.831
+
+12.854	12.877	12.900	12.923	12.946	12.969	12.992	13.016	13.039	13.062
+13.085	13.108	13.131	13.154	13.178	13.201	13.224	13.247	13.270	13.293
+13.317	13.340	13.363	13.386	13.409	13.433	13.456	13.479	13.502	13.525
+13.549	13.572	13.595	13.618	13.641	13.665	13.688	13.711	13.734	13.757
+13.781	13.804	13.827	13.850	13.874	13.897	13.920	13.943	13.967	13.990
+
+14.013	14.036	14.060	14.083	14.106	14.129	14.153	14.176	14.199	14.222
+14.246	14.269	14.292	14.316	14.339	14.362	14.385	14.409	14.432	14.455
+14.479	14.502	14.525	14.548	14.572	14.595	14.618	14.642	14.665	14.688
+14.712	14.735	14.758	14.782	14.805	14.828	14.852	14.875	14.898	14.922
+14.945	14.968	14.992	15.015	15.038	15.062	15.085	15.108	15.132	15.155
+
+15.178	15.202	15.225	15.248	15.272	15.295	15.318	15.342	15.365	15.389
+15.412	15.435	15.459	15.482	15.505	15.529	15.552	15.576	15.599	15.622
+15.646	15.669	15.693	15.716	15.739	15.763	15.786	15.810	15.833	15.856
+15.880	15.903	15.927	15.950	15.974	15.997	16.020	16.044	16.067	16.091
+16.114	16.138	16.161	16.184	16.208	16.231	16.255	16.278	16.302	16.325
+
+16.349	16.372	16.395	16.419	16.442	16.466	16.489	16.513	16.536	16.560
+16.583	16.607	16.630	16.654	16.677	16.700	16.724	16.747	16.771	16.794
+16.818	16.841	16.865	16.888	16.912	16.935	16.959	16.982	17.006	17.029
+17.053	17.076	17.100	17.123	17.147	17.170	17.194	17.217	17.241	17.264
+17.288	17.311	17.335	17.358	17.382	17.406	17.429	17.453	17.476	17.500
+
+17.523	17.547	17.570	17.594	17.617	17.641	17.664	17.688	17.711	17.735
+17.759	17.782	17.806	17.829	17.853	17.876	17.900	17.923	17.947	17.971
+17.994	18.018	18.041	18.065	18.088	18.112	18.136	18.159	18.183	18.206
+18.230	18.253	18.277	18.301	18.324	18.348	18.371	18.395	18.418	18.442
+18.466	18.489	18.513	18.536	18.560	18.584	18.607	18.631	18.654	18.678
+
+18.702	18.725	18.749	18.772	18.796	18.820	18.843	18.867	18.890	18.914
+18.938	18.961	18.985	19.008	19.032	19.056	19.079	19.103	19.127	19.150
+19.174	19.197	19.221	19.245	19.268	19.292	19.316	19.339	19.363	19.386
+19.410	19.434	19.457	19.481	19.505	19.528	19.552	19.576	19.599	19.623
+19.646	19.670	19.694	19.717	19.741	19.765	19.788	19.812	19.836	19.859
+
+19.883	19.907	19.930	19.954	19.978	20.001	20.025	20.049	20.072	20.096
+20.120	20.143	20.167	20.190	20.214	20.238	20.261	20.285	20.309	20.332
+20.356	20.380	20.403	20.427	20.451	20.474	20.498	20.522	20.545	20.569
+20.593	20.616	20.640	20.664	20.688	20.711	20.735	20.759	20.782	20.806
+20.830	20.853	20.877	20.901	20.924	20.948	20.972	20.995	21.019	21.043
+
+21.066	21.090	21.114	21.137	21.161	21.185	21.208	21.232	21.256	21.280
+21.303	21.327	21.351	21.374	21.398	21.422	21.445	21.469	21.493	21.516
+21.540	21.564	21.587	21.611	21.635	21.659	21.682	21.706	21.730	21.753
+21.777	21.801	21.824	21.848	21.872	21.895	21.919	21.943	21.966	21.990
+22.014	22.038	22.061	22.085	22.109	22.132	22.156	22.180	22.203	22.227
+
+22.251	22.274	22.298	22.322	22.346	22.369	22.393	22.417	22.440	22.464
+22.488	22.511	22.535	22.559	22.582	22.606	22.630	22.654	22.677	22.701
+22.725	22.748	22.772	22.796	22.819	22.843	22.867	22.890	22.914	22.938
+22.961	22.985	23.009	23.032	23.056	23.080	23.104	23.127	23.151	23.175
+23.198	23.222	23.246	23.269	23.293	23.317	23.340	23.364	23.388	23.411
+
+23.435	23.459	23.482	23.506	23.530	23.553	23.577	23.601	23.624	23.648
+23.672	23.695	23.719	23.743	23.766	23.790	23.814	23.837	23.861	23.885
+23.908	23.932	23.956	23.979	24.003	24.027	24.050	24.074	24.098	24.121
+24.145	24.169	24.192	24.216	24.240	24.263	24.287	24.311	24.334	24.358
+24.382	24.405	24.429	24.453	24.476	24.500	24.523	24.547	24.571	24.594
+
+24.618	24.642	24.665	24.689	24.713	24.736	24.760	24.783	24.807	24.831
+24.854	24.878	24.902	24.925	24.949	24.972	24.996	25.020	25.043	25.067
+25.091	25.114	25.138	25.161	25.185	25.209	25.232	25.256	25.279	25.303
+25.327	25.350	25.374	25.397	25.421	25.445	25.468	25.492	25.515	25.539
+25.563	25.586	25.610	25.633	25.657	25.681	25.704	25.728	25.751	25.775
+
+25.799	25.822	25.846	25.869	25.893	25.916	25.940	25.964	25.987	26.011
+26.034	26.058	26.081	26.105	26.128	26.152	26.176	26.199	26.223	26.246
+26.270	26.293	26.317	26.340	26.364	26.387	26.411	26.435	26.458	26.482
+26.505	26.529	26.552	26.576	26.599	26.623	26.646	26.670	26.693	26.717
+26.740	26.764	26.787	26.811	26.834	26.858	26.881	26.905	26.928	26.952
+
+26.975	26.999	27.022	27.046	27.069	27.093	27.116	27.140	27.163	27.187
+27.210	27.234	27.257	27.281	27.304	27.328	27.351	27.375	27.398	27.422
+27.445	27.468	27.492	27.515	27.539	27.562	27.586	27.609	27.633	27.656
+27.679	27.703	27.726	27.750	27.773	27.797	27.820	27.843	27.867	27.890
+27.914	27.937	27.961	27.984	28.007	28.031	28.054	28.078	28.101	28.124
+
+28.148	28.171	28.195	28.218	28.241	28.265	28.288	28.311	28.335	28.358
+28.382	28.405	28.428	28.452	28.475	28.498	28.522	28.545	28.569	28.592
+28.615	28.639	28.662	28.685	28.709	28.732	28.755	28.779	28.802	28.825
+28.849	28.872	28.895	28.919	28.942	28.965	28.988	29.012	29.035	29.058
+29.082	29.105	29.128	29.152	29.175	29.198	29.221	29.245	29.268	29.291
+
+29.315	29.338	29.361	29.384	29.408	29.431	29.454	29.477	29.501	29.524
+29.547	29.570	29.594	29.617	29.640	29.663	29.687	29.710	29.733	29.756
+29.780	29.803	29.826	29.849	29.872	29.896	29.919	29.942	29.965	29.989
+30.012	30.035	30.058	30.081	30.104	30.128	30.151	30.174	30.197	30.220
+30.244	30.267	30.290	30.313	30.336	30.359	30.383	30.406	30.429	30.452
+
+30.475	30.498	30.521	30.545	30.568	30.591	30.614	30.637	30.660	30.683
+30.706	30.730	30.753	30.776	30.799	30.822	30.845	30.868	30.891	30.914
+30.937	30.961	30.984	31.007	31.030	31.053	31.076	31.099	31.122	31.145
+31.168	31.191	31.214	31.237	31.260	31.283	31.306	31.329	31.353	31.376
+31.399	31.422	31.445	31.468	31.491	31.514	31.537	31.560	31.583	31.606
+
+31.629	31.652	31.675	31.698	31.721	31.744	31.767	31.790	31.813	31.836
+31.859	31.882	31.905	31.927	31.950	31.973	31.996	32.019	32.042	32.065
+32.088	32.111	32.134	32.157	32.180	32.203	32.226	32.249	32.272	32.294
+32.317	32.340	32.363	32.386	32.409	32.432	32.455	32.478	32.501	32.523
+32.546	32.569	32.592	32.615	32.638	32.661	32.683	32.706	32.729	32.752
+
+32.775	32.798	32.821	32.843	32.866	32.889	32.912	32.935	32.958	32.980
+33.003	33.026	33.049	33.072	33.094	33.117	33.140	33.163	33.186	33.208
+33.231	33.254	33.277	33.300	33.322	33.345	33.368	33.391	33.413	33.436
+33.459	33.482	33.504	33.527	33.550	33.573	33.595	33.618	33.641	33.664
+33.686	33.709	33.732	33.754	33.777	33.800	33.823	33.845	33.868	33.891
+
+33.913	33.936	33.959	33.981	34.004	34.027	34.049	34.072	34.095	34.117
+34.140	34.163	34.185	34.208	34.231	34.253	34.276	34.299	34.321	34.344
+34.366	34.389	34.412	34.434	34.457	34.480	34.502	34.525	34.547	34.570
+34.593	34.615	34.638	34.660	34.683	34.705	34.728	34.751	34.773	34.796
+34.818	34.841	34.863	34.886	34.909	34.931	34.954	34.976	34.999	35.021
+
+35.044	35.066	35.089	35.111	35.134	35.156	35.179	35.201	35.224	35.246
+35.269	35.291	35.314	35.336	35.359	35.381	35.404	35.426	35.449	35.471
+35.494	35.516	35.539	35.561	35.583	35.606	35.628	35.651	35.673	35.696
+35.718	35.741	35.763	35.785	35.808	35.830	35.853	35.875	35.897	35.920
+35.942	35.965	35.987	36.009	36.032	36.054	36.077	36.099	36.121	36.144
+
+36.166	36.188	36.211	36.233	36.256	36.278	36.300	36.323	36.345	36.367
+36.390	36.412	36.434	36.457	36.479	36.501	36.524	36.546	36.568	36.590
+36.613	36.635	36.657	36.680	36.702	36.724	36.746	36.769	36.791	36.813
+36.836	36.858	36.880	36.902	36.925	36.947	36.969	36.991	37.014	37.036
+37.058	37.080	37.103	37.125	37.147	37.169	37.191	37.214	37.236	37.258
+
+37.280	37.303	37.325	37.347	37.369	37.391	37.413	37.436	37.458	37.480
+37.502	37.524	37.547	37.569	37.591	37.613	37.635	37.657	37.679	37.702
+37.724	37.746	37.768	37.790	37.812	37.834	37.857	37.879	37.901	37.923
+37.945	37.967	37.989	38.011	38.033	38.055	38.078	38.100	38.122	38.144
+38.166	38.188	38.210	38.232	38.254	38.276	38.298	38.320	38.342	38.364
+
+38.387	38.409	38.431	38.453	38.475	38.497	38.519	38.541	38.563	38.585
+38.607	38.629	38.651	38.673	38.695	38.717	38.739	38.761	38.783	38.805
+38.827	38.849	38.871	38.893	38.915	38.937	38.959	38.981	39.003	39.024
+39.046	39.068	39.090	39.112	39.134	39.156	39.178	39.200	39.222	39.244
+39.266	39.288	39.310	39.331	39.353	39.375	39.397	39.419	39.441	39.463
+
+39.485	39.507	39.529	39.550	39.572	39.594	39.616	39.638	39.660	39.682
+39.703	39.725	39.747	39.769	39.791	39.813	39.835	39.856	39.878	39.900
+39.922	39.944	39.965	39.987	40.009	40.031	40.053	40.075	40.096	40.118
+40.140	40.162	40.183	40.205	40.227	40.249	40.271	40.292	40.314	40.336
+40.358	40.379	40.401	40.423	40.445	40.466	40.488	40.510	40.532	40.553	
+
+40.575	40.597	40.619	40.640	40.662	40.684	40.705	40.727	40.749	40.770
+40.792	40.814	40.836	40.857	40.879	40.901	40.922	40.944	40.966	40.987
+41.009	41.031	41.052	41.074	41.096	41.117	41.139	41.161	41.182	41.204
+41.225	41.247	41.269	41.290	41.312	41.334	41.355	41.377	41.398	41.420
+41.442	41.463	41.485	41.506	41.528	41.550	41.571	41.593	41.614	41.636
+
+41.657	41.679	41.701	41.722	41.744	41.765	41.787	41.808	41.830	41.851
+41.873	41.895	41.916	41.938	41.959	41.981	42.002	42.024	42.045	42.067
+42.088	42.110	42.131	42.153	42.174	42.196	42.217	42.239	42.260	42.282
+42.303	42.325	42.346	42.367	42.389	42.410	42.432	42.453	42.475	42.496
+42.518	42.539	42.560	42.582	42.603	42.625	42.646	42.668	42.689	42.710
+
+42.732	42.753	42.775	42.796	42.817	42.839	42.860	42.882	42.903	42.924
+42.946	42.967	42.989	43.010	43.031	43.053	43.074	43.095	43.117	43.138
+43.159	43.181	43.202	43.223	43.245	43.266	43.287	43.309	43.330	43.351
+43.373	43.394	43.415	43.436	43.458	43.479	43.500	43.522	43.543	43.564
+43.585	43.607	43.628	43.649	43.671	43.692	43.713	43.734	43.756	43.777
+
+43.798	43.819	43.841	43.862	43.883	43.904	43.925	43.947	43.968	43.989
+44.010	44.031	44.053	44.074	44.095	44.116	44.137	44.159	44.180	44.201
+44.222	44.243	44.265	44.286	44.307	44.328	44.349	44.370	44.391	44.413
+44.434	44.455	44.476	44.497	44.518	44.539	44.560	44.582	44.603	44.624
+44.645	44.666	44.687	44.708	44.729	44.750	44.771	44.793	44.814	44.835
+
+44.856	44.877	44.898	44.919	44.940	44.961	44.982	45.003	45.024	45.045
+45.066	45.087	45.108	45.129	45.150	45.171	45.192	45.213	45.234	45.255
+45.276	45.297	45.318	45.339	45.360	45.381	45.402	45.423	45.444	45.465
+45.486	45.507	45.528	45.549	45.570	45.591	45.612	45.633	45.654	45.675
+45.695	45.716	45.737	45.758	45.779	45.800	45.821	45.842	45.863	45.884
+
+45.904	45.925	45.946	45.967	45.988	46.009	46.030	46.051	46.071	46.092
+46.113	46.134	46.155	46.176	46.196	46.217	46.238	46.259	46.280	46.300
+46.321	46.342	46.363	46.384	46.404	46.425	46.446	46.467	46.488	46.508
+46.529	46.550	46.571	46.591	46.612	46.633	46.654	46.674	46.695	46.716	
+46.737	46.757	46.778	46.799	46.819	46.840	46.861	46.881	46.902	46.923
+
+46.944	46.964	46.985	47.006	47.026	47.047	47.068	47.088	47.109	47.130
+47.150	47.171	47.191	47.212	47.233	47.253	47.274	47.295	47.315	47.336
+47.356	47.377	47.398	47.418	47.439	47.459	47.480	47.500	47.521	47.542
+47.562	47.583	47.603	47.624	47.644	47.665	47.685	47.706	47.726	47.747
+47.767	47.788	47.808	47.829	47.849	47.870	47.890	47.911	47.931	47.952
+
+47.972	47.993	48.013	48.034	48.054	48.075	48.095	48.116	48.136	48.156
+48.177	48.197	48.218	48.238	48.258	48.279	48.299	48.320	48.340	48.360
+48.381	48.401	48.422	48.442	48.462	48.483	48.503	48.523	48.544	48.564
+48.584	48.605	48.625	48.645	48.666	48.686	48.706	48.727	48.747	48.767
+48.787	48.808	48.828	48.848	48.869	48.889	48.909	48.929	48.950	48.970
+
+48.990	49.010	49.031	49.051	49.071	49.091	49.111	49.132	49.152	49.172
+49.192	49.212	49.233	49.253	49.273	49.293	49.313	49.333	49.354	49.374
+49.394	49.414	49.434	49.454	49.474	49.495	49.515	49.535	49.555	49.575
+49.595	49.615	49.635	49.655	49.675	49.696	49.716	49.736	49.756	49.776
+49.796	49.816	49.836	49.856	49.876	49.896	49.916	49.936	49.956	49.976
+
+49.996	50.016	50.036	50.056	50.076	50.096	50.116	50.136	50.156	50.176
+50.196	50.216	50.236	50.256	50.276	50.296	50.315	50.335	50.355	50.375
+50.395	50.415	50.435	50.455	50.475	50.494	50.514	50.534	50.554	50.574
+50.594	50.614	50.633	50.653	50.673	50.693	50.713	50.733	50.752	50.772
+50.792	50.812	50.832	50.851	50.871	50.891	50.911	50.930	50.950	50.970
+
+50.990	51.009	51.029	51.049	51.069	51.088	51.108	51.128	51.148	51.167
+51.187	51.207	51.226	51.246	51.266	51.285	51.305	51.325	51.344	51.364
+51.384	51.403	51.423	51.443	51.462	51.482	51.501	51.521	51.541	51.560
+51.580	51.599	51.619	51.639	51.658	51.678	51.697	51.717	51.736	51.756
+51.776	51.795	51.815	51.834	51.854	51.873	51.893	51.912	51.932	51.951	
+
+51.971	51.990	52.010	52.029	52.049	52.068	52.088	52.107	52.127	52.146
+52.165	52.185	52.204	52.224	52.243	52.263	52.282	52.301	52.321	52.340
+52.360	52.379	52.398	52.418	52.437	52.457	52.476	52.495	52.515	52.534
+52.553	52.573	52.592	52.611	52.631	52.650	52.669	52.689	52.708	52.727
+52.747	52.766	52.785	52.805	52.824	52.843	52.862	52.882	52.901	52.920
+
+52.939	52.959	52.978	52.997	53.016	53.036	53.055	53.074	53.093	53.113
+53.132	53.151	53.170	53.189	53.209	53.228	53.247	53.266	53.285	53.304
+53.324	53.343	53.362	53.381	53.400	53.419	53.439	53.458	53.477	53.496
+53.515	53.534	53.553	53.572	53.592	53.611	53.630	53.649	53.668	53.687
+53.706	53.725	53.744	53.763	53.782	53.801	53.821	53.840	53.859	53.878
+
+53.897	53.916	53.935	53.954	53.973	53.992	54.011	54.030	54.049	54.068
+54.087	54.106	54.125	54.144	54.163	54.182	54.201	54.220	54.239	54.258
+54.277	54.296	54.315	54.334	54.353	54.372	54.391	54.410	54.429	54.447
+54.466	54.485	54.504	54.523	54.542	54.561	54.580	54.599	54.618	54.637
+54.656	54.675	54.694	54.712	54.731	54.750	54.769	54.788	54.807	54.826
+
+54.845

src/bpt/cvtBpt.c

@@ -1,9 +1,10 @@
 /* $Id$ */
   
-/* cvtBpt.c - Convert using breakpoint table */
-/*
- *      Author:          Janet Anderson
- *      Date:            9-19-91
+/* cvtBpt.c - Convert using breakpoint table
+ *
+ *      Author:          Marty Kraimer
+ *      Date:            04OCT95
+ *	This is adaptation of old bldCvtTable 
  *
  *     Experimental Physics and Industrial Control System (EPICS)
  *
@@ -29,63 +30,78 @@
  *
  * Modification Log:
  * -----------------
- * nnn mm-dd-yy          nnn     Comment
- * .02  05-18-92        rcz     New database access
- * .03  12-11-92	mrk	ANSI prototypes
+ * 01	04OCT95	mrk	Taken from old bldCvtTable
  */
 #include     <vxWorks.h>
-#include     <types.h>
-#include     <stdioLib.h>
+#include     <stdlib.h>
+#include     <stdio.h>
+#include     <ctype.h>
 
-#include     <cvtTable.h>
-#include     <dbAccess.h>
+#include     <ellLib.h>
 #include     <dbBase.h>
+#include     <dbStaticLib.h>
+#include     <cvtTable.h>
+#include     <epicsPrint.h>
 
-extern struct dbBase *pdbBase;
+extern struct dbBase *pdbbase;
 
 
 
-#ifdef __STDC__
-long cvtRawToEngBpt(double *pval,short linr,short init, void **ppbrk, short *plbrk)
-#else /* __STDC__ */
-long cvtRawToEngBpt(pval, linr, init, ppbrk, plbrk)
-double *pval;
-short linr;
-short init;
-void **ppbrk;
-short *plbrk;
-#endif /* __STDC__ */
+static brkTable *findBrkTable(short linr)
 { 
-     double           val=*pval;
-     long             status=0;
-     struct brkTable *pbrkTable;
-     struct brkInt   *pInt;     
-     struct brkInt   *pnxtInt;
-     short            lbrk;
-     int              number;
-     struct arrBrkTable *pcvtTable;
+    brkTable	*pbrkTable;
+    dbMenu	*pdbMenu;
+    char	name[50];
+    char	*pname = name;
+    int		len,ind;
 
-     if(linr < 2) return(-1);
-     if(init==TRUE || *ppbrk == NULL) { /*must find breakpoint table*/
-         if( !(pcvtTable=pdbBase->pcvtTable) || (pcvtTable->number < linr)
-         ||  (!(pcvtTable->papBrkTable[linr]))) {
-                 errMessage(S_db_badField,"Breakpoint Table not Found");
-                 return(S_db_badField);
-         }
-         *ppbrk = (void *)(pcvtTable->papBrkTable[linr]);
-         /* Just start at the beginning */
-         *plbrk=0;
-     }
 
-     pbrkTable = (struct brkTable *)*ppbrk;
-     number = pbrkTable->number;
-     lbrk = *plbrk;
-     /*make sure we dont go off end of table*/
-     if( (lbrk+1) >= number ) lbrk--;
-     pInt = pbrkTable->papBrkInt[lbrk];
-     pnxtInt = pbrkTable->papBrkInt[lbrk+1];
-     /* find entry for increased value */
-     while( (pnxtInt->raw) <= val ) {
+    pdbMenu = dbFindMenu(pdbbase,"menuConvert");
+    len = strlen(pdbMenu->papChoiceValue[linr]);
+    if(len>=sizeof(name)) {
+	epicsPrintf("Break Tables(findBrkTable) choice name too long\n");
+	return(0);
+    }
+    strcpy(pname,pdbMenu->papChoiceValue[linr]);
+    for(ind=0; ind<strlen(pname); ind++) {
+	if(!isalnum(pname[ind])) {
+	    pname[ind] = '\0';
+	    break;
+	}
+    }
+    pbrkTable = dbFindBrkTable(pdbbase,pname);
+    return(pbrkTable);
+}
+
+long cvtRawToEngBpt(double *pval,short linr,short init, void **ppbrk,
+	short *plbrk)
+{ 
+    double	val=*pval;
+    long	status=0;
+    brkTable	*pbrkTable;
+    brkInt	*pInt;     
+    brkInt	*pnxtInt;
+    short	lbrk;
+    int		number;
+
+
+    if(linr < 2) return(-1);
+    if(init==TRUE || *ppbrk == NULL) { /*must find breakpoint table*/
+	pbrkTable = findBrkTable(linr);
+	if(!pbrkTable) return(S_dbLib_badField);
+	*ppbrk = (void *)pbrkTable;
+	/* Just start at the beginning */
+	*plbrk=0;
+    }
+    pbrkTable = (struct brkTable *)*ppbrk;
+    number = pbrkTable->number;
+    lbrk = *plbrk;
+    /*make sure we dont go off end of table*/
+    if( (lbrk+1) >= number ) lbrk--;
+    pInt = pbrkTable->papBrkInt[lbrk];
+    pnxtInt = pbrkTable->papBrkInt[lbrk+1];
+    /* find entry for increased value */
+    while( (pnxtInt->raw) <= val ) {
          lbrk++;
          pInt = pbrkTable->papBrkInt[lbrk];
          if( lbrk >= number-1) {
@@ -93,54 +109,40 @@ short *plbrk;
                 break;
          }
          pnxtInt = pbrkTable->papBrkInt[lbrk+1];
-     }
-     while( (pInt->raw) > val) {
+    }
+    while( (pInt->raw) > val) {
          if(lbrk==0) {
                 status=1;
                 break;
             }
          lbrk--;
          pInt = pbrkTable->papBrkInt[lbrk];
-     }
-     *plbrk = lbrk;
-     *pval = pInt->eng + (val - pInt->raw) * pInt->slope;
-     return(status);
+    }
+    *plbrk = lbrk;
+    *pval = pInt->eng + (val - pInt->raw) * pInt->slope;
+    return(status);
 }
 
-#ifdef __STDC__
 long cvtEngToRawBpt(double *pval,short linr,short init,
 	 void **ppbrk,short *plbrk)
-#else /* __STDC__ */
-long cvtEngToRawBpt(pval,linr, init,ppbrk,plbrk)
-double *pval;
-short linr;
-short init;
-void **ppbrk;
-short *plbrk;
-#endif /* __STDC__ */
 { 
-     double           val=*pval;
-     long             status=0;
-     struct brkTable *pbrkTable;
-     struct brkInt   *pInt;     
-     struct brkInt   *pnxtInt;
-     short         lbrk;
-     int         number;
-     struct arrBrkTable *pcvtTable;
+     double	val=*pval;
+     long	status=0;
+     brkTable	*pbrkTable;
+     brkInt	*pInt;     
+     brkInt	*pnxtInt;
+     short	lbrk;
+     int	number;
 
 
      if(linr < 2) return(-1);
      if(init==TRUE || *ppbrk == NULL) { /*must find breakpoint table*/
-         if( !(pcvtTable=pdbBase->pcvtTable) || (pcvtTable->number < linr)
-         ||  (!(pcvtTable->papBrkTable[linr]))) {
-                 errMessage(S_db_badField,"Breakpoint Table not Found");
-                 return(S_db_badField);
-         }
-         *ppbrk = (void *)(pcvtTable->papBrkTable[linr]);
+	pbrkTable = findBrkTable(linr);
+	if(!pbrkTable) return(S_dbLib_badField);
+	*ppbrk = (void *)pbrkTable;
          /* Just start at the beginning */
          *plbrk=0;
      }
-
      pbrkTable = (struct brkTable *)*ppbrk;
      number = pbrkTable->number;
      lbrk = *plbrk;

src/bpt/cvtTable.h

@@ -0,0 +1,45 @@
+/* $Id$
+ * Breakpoint Tables
+ *
+ *      Author:          Marty Kraimer
+ *      Date:            11-7-90
+ *
+ *      Experimental Physics and Industrial Control System (EPICS)
+ *
+ *      Copyright 1991, the Regents of the University of California,
+ *      and the University of Chicago Board of Governors.
+ *
+ *      This software was produced under  U.S. Government contracts:
+ *      (W-7405-ENG-36) at the Los Alamos National Laboratory,
+ *      and (W-31-109-ENG-38) at Argonne National Laboratory.
+ *
+ *      Initial development by:
+ *              The Controls and Automation Group (AT-8)
+ *              Ground Test Accelerator
+ *              Accelerator Technology Division
+ *              Los Alamos National Laboratory
+ *
+ *      Co-developed with
+ *              The Controls and Computing Group
+ *              Accelerator Systems Division
+ *              Advanced Photon Source
+ *              Argonne National Laboratory
+ *
+ * Modification Log:
+ * -----------------
+ * .01  05-18-92        rcz     removed extern
+ * .02  05-18-92        rcz     new database access
+ * .03  08-19-92        jba     add prototypes for cvtRawToEngBpt,cvtEngToRawBpt
+ */
+
+#ifndef INCcvtTableh
+#define INCcvtTableh	1
+
+/* Global Routines*/
+long cvtEngToRawBpt(double *pval,short linr,short init,
+     void **ppbrk,short *plbrk);
+
+long cvtRawToEngBpt(double *pval,short linr,short init,
+     void **ppbrk, short *plbrk);
+
+#endif

src/bpt/makeBpt.c

@@ -0,0 +1,405 @@
+/*  $Id$
+ *	Author: Marty Kraimer
+ *	Date:	9/28/95
+ *	Replacement for old bldCvtTable
+ *
+ *	Experimental Physics and Industrial Control System (EPICS)
+ *
+ *	Copyright 1991, the Regents of the University of California,
+ *	and the University of Chicago Board of Governors.
+ *
+ *	This software was produced under  U.S. Government contracts:
+ *	(W-7405-ENG-36) at the Los Alamos National Laboratory,
+ *	and (W-31-109-ENG-38) at Argonne National Laboratory.
+ *
+ *	Initial development by:
+ *		The Controls and Automation Group (AT-8)
+ *		Ground Test Accelerator
+ *		Accelerator Technology Division
+ *		Los Alamos National Laboratory
+ *
+ *	Co-developed with
+ *		The Controls and Computing Group
+ *		Accelerator Systems Division
+ *		Advanced Photon Source
+ *		Argonne National Laboratory
+ *
+ * Modification Log:
+ * -----------------
+ * .01	28SEP95	mrk	Replace old bldCvtTable
+ */
+
+#include <stdlib.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+#include <dbBase.h>
+#include <ellLib.h>
+#include <cvtTable.h>
+
+#define MAX_LINE_SIZE 160
+#define MAX_BREAKS 100
+struct brkCreateInfo {
+    float           engLow;	/* Lowest value desired: engineering units */
+    float           engHigh;	/* Highest value desired: engineering units */
+    float            rawLow;	/* Raw value for EngLow			 */
+    float            rawHigh;	/* Raw value for EngHigh		 */
+    float           accuracy;	/* accuracy desired in engineering units */
+    float           tblEngFirst;/* First table value: engineering units */
+    float           tblEngLast;	/* Last table value: engineering units	 */
+    float           tblEngDelta;/* Change per table entry: eng units	 */
+    long            nTable;	/* number of table entries 		 */
+    /* (last-first)/delta + 1		 */
+    float          *pTable;	/* addr of data table			 */
+} brkCreateInfo;
+
+brkInt brkint[MAX_BREAKS];
+
+static int create_break(struct brkCreateInfo *pbci, brkInt *pabrkInt,
+	int max_breaks, int *n_breaks);
+static char inbuf[MAX_LINE_SIZE];
+static int linenum=0;
+
+typedef struct dataList{
+	struct dataList *next;
+	float		value;
+}dataList;
+
+static int getNumber(char **pbeg, float *value)
+{
+    int	 nchars=0;
+
+    while(isspace(**pbeg) && **pbeg!= '\0') (*pbeg)++;
+    if(**pbeg == '!' || **pbeg == '\0') return(-1);
+    if(sscanf(*pbeg,"%f%n",value,&nchars)!=1) return(-1);
+    *pbeg += nchars;
+    return(0);
+}
+	
+static void errExit(char *pmessage)
+{
+    fprintf(stderr,pmessage);
+    fprintf(stderr,"\n");
+    exit(-1);
+}
+
+int main(argc, argv)
+    int             argc;
+    char          **argv;
+{
+    char	*pbeg;
+    char	*pend;
+    float	value;
+    char	*pname;
+    dataList	*phead;
+    dataList	*pdataList;
+    dataList	*pnext;
+    float	*pdata;
+    long	ndata;
+    int		nBreak,len,n;
+    char	*outFilename;
+    char	*pext;
+    FILE	*outFile;
+    FILE	*inFile;
+    char	*plastSlash;
+    
+
+    if(argc!=2) {
+	fprintf(stderr,"usage: makeBpt file.data\n");
+	exit(-1);
+    }
+    plastSlash = strrchr(argv[1],'/');
+    plastSlash = (plastSlash ? plastSlash+1 : argv[1]);
+    outFilename = calloc(1,strlen(plastSlash)+2);
+    strcpy(outFilename,plastSlash);
+    pext = strstr(outFilename,".data");
+    if(!pext) {
+	fprintf(stderr,"Input file MUST have .data  extension\n");
+	exit(-1);
+    }
+    strcpy(pext,".dbd");
+    inFile = fopen(argv[1],"r");
+    if(!inFile) {
+	fprintf(stderr,"Error opening %s\n",argv[1]);
+	exit(-1);
+    }
+    outFile = fopen(outFilename,"w");
+    if(!outFile) {
+	fprintf(stderr,"Error opening %s\n",outFilename);
+	exit(-1);
+    }
+    while(fgets(inbuf,MAX_LINE_SIZE,inFile)) {
+	linenum++;
+	inbuf[strlen(inbuf)] = '\0'; /* remove newline*/
+	pbeg = inbuf;
+	while(isspace(*pbeg) && *pbeg!= '\0') pbeg++;
+	if(*pbeg == '!' || *pbeg == '\0') continue;
+	while(*pbeg!='"' && *pbeg!= '\0') pbeg++;
+	if(*pbeg!='"' ) errExit("Illegal Header");
+	pbeg++; pend = pbeg;
+	while(*pend!='"' && *pend!= '\0') pend++;
+	if(*pend!='"') errExit("Illegal Header");
+	len = pend - pbeg;
+	if(len<=1) errExit("Illegal Header");
+	pname = calloc(len,sizeof(char));
+	strncpy(pname,pbeg,len);
+	pbeg = pend + 1;
+	if(getNumber(&pbeg,&value)) errExit("Illegal Header");
+	brkCreateInfo.engLow = value;
+	if(getNumber(&pbeg,&value)) errExit("Illegal Header");
+	brkCreateInfo.rawLow = value;
+	if(getNumber(&pbeg,&value)) errExit("Illegal Header");
+	brkCreateInfo.engHigh = value;
+	if(getNumber(&pbeg,&value)) errExit("Illegal Header");
+	brkCreateInfo.rawHigh = value;
+	if(getNumber(&pbeg,&value)) errExit("Illegal Header");
+	brkCreateInfo.accuracy = value;
+	if(getNumber(&pbeg,&value)) errExit("Illegal Header");
+	brkCreateInfo.tblEngFirst = value;
+	if(getNumber(&pbeg,&value)) errExit("Illegal Header");
+	brkCreateInfo.tblEngLast = value;
+	if(getNumber(&pbeg,&value)) errExit("Illegal Header");
+	brkCreateInfo.tblEngDelta = value;
+	goto got_header;
+    }
+    errExit("Illegal Header");
+got_header:
+    phead = pnext = 0;
+    ndata = 0;
+    errno = 0;
+    while(fgets(inbuf,MAX_LINE_SIZE,inFile)) {
+	float	value;
+
+	inbuf[strlen(inbuf)] = '\0'; /* remove newline*/
+	pbeg = inbuf;
+	while(!getNumber(&pbeg,&value)) {
+	    ndata++;
+	    pdataList = (dataList *)calloc(1,sizeof(dataList));
+	    if(!phead) 
+		phead = pdataList;
+	    else
+		pnext->next = pdataList;
+	    pdataList->value = value;
+	    pnext = pdataList;
+	}
+    }
+    brkCreateInfo.nTable = ndata;
+    pdata = (float *)calloc(brkCreateInfo.nTable,sizeof(float));
+    pnext = phead;
+    for(n=0; n<brkCreateInfo.nTable; n++) {
+	pdata[n] = pnext->value;
+	pdataList = pnext;
+	pnext = pnext->next;
+	free((void *)pdataList);
+    }
+    brkCreateInfo.pTable = pdata;
+    if(create_break(&brkCreateInfo,&brkint[0],MAX_BREAKS,&nBreak)) 
+	errExit("create_break failed\n");
+    fprintf(outFile,"breaktable(%s) {\n",pname);
+    for(n=0; n<nBreak; n++) {
+	fprintf(outFile,"\t%f %f\n",brkint[n].raw,brkint[n].eng);
+    }
+    fprintf(outFile,"}\n");
+    fclose(inFile);
+    fclose(outFile);
+    return(0);
+}
+
+static int create_break( struct brkCreateInfo *pbci, brkInt *pabrkInt,
+    int max_breaks, int *n_breaks)
+{
+    brkInt  *pbrkInt;
+    float          *table = pbci->pTable;
+    long            ntable = pbci->nTable;
+    double          ilow,
+                    ihigh,
+                    tbllow,
+                    tblhigh,
+                    slope,
+                    offset;
+    int             ibeg,
+                    iend,
+                    i,
+                    inc,
+                    imax,
+                    n;
+    double          rawBeg,
+                    engBeg,
+                    rawEnd,
+                    engEnd,
+                    engCalc,
+                    engActual,
+                    error;
+    int             valid,
+                    all_ok,
+                    expanding;
+    /* make checks to ensure that brkCreateInfo makes sense */
+    if (pbci->engLow >= pbci->engHigh) {
+	errExit("create_break: engLow >= engHigh");
+	return (-1);
+    }
+    if ((pbci->engLow < pbci->tblEngFirst)
+	    || (pbci->engHigh > pbci->tblEngLast)) {
+	errExit("create_break: engLow > engHigh");
+	return (-1);
+    }
+    if (pbci->tblEngDelta <= 0.0) {
+	errExit("create_break: tblEngDelta <= 0.0");
+	return (-1);
+    }
+    if (ntable < 3) {
+	errExit("raw data must have at least 3 elements");
+	return (-1);
+    }
+/***************************************************************************
+			 Convert Table to raw values
+ *
+ * raw and table values are assumed to be related by an equation of the form:
+ *
+ * raw = slope*table + offset
+ *
+ * The following algorithm converts each table value to raw units
+ *
+ * 1) Finds the locations in Table corresponding to engLow and engHigh
+ *    Note that these locations need not be exact integers
+ * 2) Interpolates to obtain table values corresponding to engLow and enghigh
+ *    we now have the equations:
+ *    rawLow = slope*tblLow + offset
+ *    rawHigh = slope*tblHigh + offset
+ * 4) Solving these equations for slope and offset gives:
+ *    slope=(rawHigh-rawLow)/(tblHigh-tblLow)
+ *    offset=rawHigh-slope*tblHigh
+ * 5) for each table value set table[i]=table[i]*slope+offset
+ *************************************************************************/
+    /* Find engLow in Table  and then compute tblLow */
+    ilow = (pbci->engLow - pbci->tblEngFirst) / (pbci->tblEngDelta);
+    i = (int) ilow;
+    if (i >= ntable - 1)
+	i = ntable - 2;
+    tbllow = table[i] + (table[i + 1] - table[i]) * (ilow - (float) i);
+    /* Find engHigh in Table and then compute tblHigh */
+    ihigh = (pbci->engHigh - pbci->tblEngFirst) / (pbci->tblEngDelta);
+    i = (int) ihigh;
+    if (i >= ntable - 1)
+	i = ntable - 2;
+    tblhigh = table[i] + (table[i + 1] - table[i]) * (ihigh - (float) i);
+    /* compute slope and offset */
+    slope = (pbci->rawHigh - pbci->rawLow) / (tblhigh - tbllow);
+    offset = pbci->rawHigh - slope * tblhigh;
+    /* convert table to raw units */
+    for (i = 0; i < ntable; i++)
+	table[i] = table[i] * slope + offset;
+
+/*****************************************************************************
+ *		Now create break point table
+ *
+ * The algorithm does the following:
+ *
+ * It finds one breakpoint interval at a time. For each it does the following:
+ *
+ * 1) Use a relatively large portion of the remaining table as an interval
+ * 2) It attempts to use the entire interval as a breakpoint interval
+ *	Success is determined by the following algorithm:
+ *	  a) compute the slope using the entire interval
+ *        b) for each table entry in the interval determine the eng value
+ *	     using the slope just determined.
+ *	  c) compare the computed value with eng value associated with table
+ *        d) if all table entries are within the accuracy desired then success.
+ * 3) If successful then attempt to expand the interval and try again.
+ *    Note that it is expanded by up to 1/10 of the table size.
+ * 4) If not successful reduce the interval by 1 and try again.
+ *    Once the interval is being decreased it will never be increased again.
+ * 5) The algorithm will ultimately fail or will have determined the optimum
+ *    breakpoint interval
+ *************************************************************************/
+
+    /* Must start with table entry corresponding to engLow; */
+    i = ilow;
+    if (i >= ntable - 1)
+	i = ntable - 2;
+    rawBeg = table[i] + (table[i + 1] - table[i]) * (ilow - (float) i);
+    engBeg = pbci->engLow;
+    ibeg = (int) (ilow);       /* Make sure that ibeg > ilow */
+    if( ibeg < ilow ) ibeg = ibeg + 1;
+    /* start first breakpoint interval */
+    n = 1;
+    pbrkInt = pabrkInt;
+    pbrkInt->raw = rawBeg;
+    pbrkInt->eng = engBeg;
+    /* determine next breakpoint interval */
+    while ((engBeg <= pbci->engHigh) && (ibeg < ntable - 1)) {
+	/* determine next interval to try. Up to 1/10 full range */
+	iend = ibeg;
+	inc = (int) ((ihigh - ilow) / 10.0);
+	if (inc < 1)
+	    inc = 1;
+	valid = TRUE;
+	/* keep trying intervals until cant do better */
+	expanding = TRUE;	/* originally we are trying larger and larger
+				 * intervals */
+	while (valid) {
+	    imax = iend + inc;
+	    if (imax >= ntable) {
+		/* don't go past end of table */
+		imax = ntable - 1;
+		inc = ntable - iend - 1;
+		expanding = FALSE;
+	    }
+	    if (imax > (int) (ihigh + 1.0)) {	/* Don't go to far past
+						 * engHigh */
+		imax = (int) (ihigh + 1.0);
+		inc = (int) (ihigh + 1.0) - iend;
+		expanding = FALSE;
+	    }
+	    if (imax <= ibeg)
+		break;		/* failure */
+	    rawEnd = table[imax];
+	    engEnd = pbci->tblEngFirst + (float) imax *(pbci->tblEngDelta);
+	    slope = (engEnd - engBeg) / (rawEnd - rawBeg);
+	    all_ok = TRUE;
+	    for (i = ibeg + 1; i <= imax; i++) {
+		engCalc = engBeg + slope * (table[i] - rawBeg);
+		engActual = pbci->tblEngFirst + ((float) i) * (pbci->tblEngDelta);
+		error = engCalc - engActual;
+		if (error < 0.0)
+		    error = -error;
+		if (error >= pbci->accuracy) {
+		    /* we will be trying smaller intervals */
+		    expanding = FALSE;
+		    /* just decrease inc and let while(valid) try again */
+		    inc--;
+		    all_ok = FALSE;
+		    break;
+		}
+	    }			/* end for */
+	    if (all_ok) {
+		iend = imax;
+		/* if not expanding we found interval */
+		if (!expanding)
+		    break;
+		/* will automatically try larger interval */
+	    }
+	}			/* end while(valid) */
+	/* either we failed or optimal interval has been found */
+	if ((iend <= ibeg) && (iend < (int) ihigh)) {
+	    errExit("Could not meet accuracy criteria");
+	    return (-1);
+	}
+	pbrkInt->slope = slope;
+	/* get ready for next breakpoint interval */
+	if (n++ >= max_breaks) {
+	    errExit("Break point table too large");
+	    return (-1);
+	}
+	ibeg = iend;
+	pbrkInt++;
+	rawBeg = rawEnd;
+	engBeg = engEnd;
+	pbrkInt->raw = rawBeg;
+	pbrkInt->eng = engBeg + (pbrkInt->raw - rawBeg) * slope;
+    }
+    pbrkInt->slope = 0.0;
+    *n_breaks = n;
+    return (0);
+}

src/bpt/menuConvert.dbd

@@ -0,0 +1,16 @@
+menu(menuConvert) {
+	choice(menuConvertNO_CONVERSION,"NO CONVERSION")
+	choice(menuConvertLINEAR,"LINEAR")
+	choice(menuConverttypeKdegF,"typeKdegF")
+	choice(menuConverttypeKdegC,"typeKdegC")
+	choice(menuConverttypeJdegF,"typeJdegF")
+	choice(menuConverttypeJdegC,"typeJdegC")
+	choice(menuConverttypeEdegF,"typeEdegF(ixe only)")
+	choice(menuConverttypeEdegC,"typeEdegC(ixe only)")
+	choice(menuConverttypeTdegF,"typeTdegF")
+	choice(menuConverttypeTdegC,"typeTdegC")
+	choice(menuConverttypeRdegF,"typeRdegF")
+	choice(menuConverttypeRdegC,"typeRdegC")
+	choice(menuConverttypeSdegF,"typeSdegF")
+	choice(menuConverttypeSdegC,"typeSdegC")
+}

src/ca/BUILD_VMS.COM

@@ -23,7 +23,7 @@ $!
 $!========================================================================
 $!
 $! Example FTP script moves sources from UNIX to VMS
-$! (remove "$!" comment delimeters)
+$! (remove "$!" comment delimiters)
 $!
 $! user XXXXXXX 
 $! cd [.ca]
@@ -35,7 +35,9 @@ $! put BUILD_VMS.COM
 $! lcd ../libCom
 $! mput *.c
 $! mput *.h
-$! lcd ../../include
+$! lcd O.sun4
+$! mput envData.c
+$! lcd ../../../include
 $! mput *.h
 $!========================================================================
 $!
@@ -48,6 +50,7 @@ $ define /nolog tcp multinet_root:[multinet.include]
 $!
 $! Compile the functions and test programs
 $! Define symbol for the CC command
+$ call list_define
 $ call set_cc_command
 $ if (p1 .nes. "")
 $ then
@@ -67,13 +70,14 @@ TEST_EVENT, -
 BSD_DEPEN, - 
 IF_DEPEN, - 
 VMS_DEPEN, -
-ELLLIB, - 
-BUCKETLIB, -
-ENVSUBR, -
-TSSUBR, -
+[-.libcom]ELLLIB, -
+[-.libcom]BUCKETLIB, -
+[-.libcom]ENVSUBR, -
+[-.libcom]TSSUBR, -
 NEXTFIELDSUBR, -
 ASSERTUNIX, -
-CATIME, - 
+[-.libcom]ENVDATA, -
+[-.ca]CATIME, - 
 ACCTST 
 $ endif
 $
@@ -96,6 +100,7 @@ BUCKETLIB, -
 TSSUBR, -
 ENVSUBR, -
 NEXTFIELDSUBR, -
+ENVDATA, -
 ASSERTUNIX, -
 ELLLIB
 $! Link the test programs
@@ -131,10 +136,20 @@ $ if f$getsyi("HW_MODEL") .ge. 1024
 $ then
 $! turn of no prototype messages because MULTINET does not
 $! supply prototypes.
-$ cc_command:== cc /warn=(disable=IMPLICITFUNC)/float=d_float /include=([], [-.include], [-.libcom]) 
+$ cc_command:== cc /warn=(disable=IMPLICITFUNC)/float=d_float -
+/define=("__STDC__=1", "MULTINET=1") -
+/include=([], [-.include], [-.include.os.vms], [-.libcom], [-.db]) 
 $ else
-$ cc_command:== cc /include=([], [-.include], [-.libcom]) 
+$ cc_command:== cc /define=("__STDC__=1", "MULTINET=1") 'listing' -
+/include=([], [-.include], [-.include.os.vms], [-.libcom], [-.db]) 
 $ endif
+$
 $ endsubroutine
+$ list_define: subroutine
+$ listing == ""
+$ if p1 .eqs. "L" then listing == "/lis=list.lis /sho=incl"
+$ endsubroutine
+$
 $! ************************************************************
 
+

src/ca/Makefile

@@ -1,15 +1,7 @@
-#
-# $Id$
-#
-#  Lowest Level Directroy Makefile
-#        by Janet Anderson
-#
-# $Log$
-#
 
-EPICS=../../..
+TOP=../..
 
-include $(EPICS)/config/CONFIG_BASE
+include $(TOP)/config/CONFIG_BASE
 
-include $(EPICS)/config/RULES_ARCHS
+include $(TOP)/config/RULES_ARCHS
 

src/ca/Makefile.Host

@@ -0,0 +1,64 @@
+#	Makefile.Host
+
+TOP = ../../..
+include $(TOP)/config/CONFIG_BASE
+CMPLR = STRICT
+
+#
+#	includes to install from this subproject
+#
+INC += cadef.h
+INC += caerr.h
+INC += caeventmask.h
+INC += caProto.h
+
+#
+#	Contents of library: generic, special and for all systems
+#
+
+# on generic system
+LIBSRCS_DEFAULT := posix_depen.c if_depen.c caRepeater.c
+
+# on WIN32 only
+LIBSRCS_WIN32   := windows_depen.c
+
+# on all systems
+LIBSRCS += iocinf.c
+LIBSRCS += service.c
+LIBSRCS += conn.c
+LIBSRCS += netdb_depen.c
+LIBSRCS += flow_control.c
+LIBSRCS += syncgrp.c
+LIBSRCS += access.c
+LIBSRCS += convert.c
+LIBSRCS += test_event.c
+LIBSRCS += bsd_depen.c
+LIBSRCS += repeater.c
+
+#       Library to build:
+#       lib$(LIBRARY).a  or   ..dll/..exp/..lib
+#
+LIBRARY := ca
+
+#	build LIBRARY as a DLL on WIN32, other systems may ignore this
+LIBTYPE := SHARED
+
+#	WIN32 only: need additional lib to build the DLL and special def-file
+DLL_LIBS := Com
+
+PROD := caRepeater
+
+#	libs needed to build [TEST]PRODUCT
+PROD_LIBS := ca Com
+
+TESTPROD := catime acctst
+
+include $(TOP)/config/RULES.Host
+
+pcatime : catime.o $(PRODDEPLIBS)
+	$(PURIFY) $(LINK.c) catime.o $(LDLIBS)
+
+pacctst : acctst.o $(PRODDEPLIBS)
+	$(PURIFY) $(LINK.c) acctst.o $(LDLIBS)
+
+#	EOF Makefile.Host