Update version to 3.15.6-rc1

(fixes lp:1786927)

.ci/checkout-modules.sh

@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# Checkout submodules on their appropriate branches
-#
-
-git submodule foreach '\
-    git checkout `git config -f $toplevel/.gitmodules submodule.$name.branch` && \
-    git pull '

.gitattributes

@@ -1,5 +0,0 @@
-.ci/          export-ignore
-.tools/       export-ignore
-.appveyor.yml export-ignore
-.travis.yml   export-ignore
-README        export-subst

.gitignore

@@ -7,8 +7,6 @@
 /include/
 /templates/
 /configure/*.local
-/modules/RELEASE.*.local
-/modules/Makefile.local
 O.*/
 /QtC-*
 *.orig

.gitmodules

@@ -1,24 +0,0 @@
-[submodule "modules/pvData"]
-    path = modules/pvData
-    url = https://github.com/epics-base/pvDataCPP
-    branch = master
-[submodule "modules/pvAccess"]
-    path = modules/pvAccess
-    url = https://github.com/epics-base/pvAccessCPP
-    branch = master
-[submodule "modules/normativeTypes"]
-    path = modules/normativeTypes
-    url = https://github.com/epics-base/normativeTypesCPP
-    branch = master
-[submodule "modules/pvaClient"]
-    path = modules/pvaClient
-    url = https://github.com/epics-base/pvaClientCPP
-    branch = master
-[submodule "modules/pvDatabase"]
-    path = modules/pvDatabase
-    url = https://github.com/epics-base/pvDatabaseCPP
-    branch = master
-[submodule "modules/pva2pva"]
-    path = modules/pva2pva
-    url = https://github.com/epics-base/pva2pva
-    branch = master

.tools/make-tar.sh

@@ -1,109 +0,0 @@
-#!/bin/sh
-#
-# Make tar for git repo w/ one level of sub modules.
-#
-set -e
-
-die() {
-  echo "$1" >&2
-  exit 1
-}
-
-TOPREV="$1"
-FINALTAR="$2"
-PREFIX="$3"
-
-if ! [ "$TOPREV" ]
-then
-   cat <<EOF >&2
-usage: $0 [rev] [outfile.tar.gz] [prefix/]
-
-  <rev> may be any git revision spec. (tag, branch, or commit id).
-
-  Output file may be .tar.gz, .tar.bz2, or any extension supported by "tar -a".
-  If output file name is omitted, "base-<rev>.tar.gz" will be used.
-  If <prefix> is omitted, the default prefix is "base-<rev>/".
-EOF
-   exit 1
-fi
-
-[ "$FINALTAR" ] || FINALTAR="base-$TOPREV.tar.gz"
-[ "$PREFIX" ] || PREFIX="base-$TOPREV/"
-
-case "$PREFIX" in
-*/) ;;
-*)  die "Prefix must end with '/'";;
-esac
-
-# Check for both <tag> and R<tag>
-if ! [ `git tag -l $TOPREV` ]
-then
-  if [ `git tag -l R$TOPREV` ]
-  then
-    TOPREV="R$TOPREV"
-  else
-    die "No tags exist '$TOPREV' or 'R$TOPREV'"
-  fi
-fi
-
-# temporary directory w/ automatic cleanup
-TDIR=`mktemp -d`
-trap 'rm -rf "$TDIR"' EXIT INT QUIT TERM
-
-mkdir "$TDIR"/tar
-
-echo "Exporting revision $TOPREV as $FINALTAR with prefix $PREFIX"
-
-# Use git-archive to copy files at the given revision into our temp. dir.
-# Respects 'export-exclude' in .gitattributes files.
-
-git archive --prefix=$PREFIX $TOPREV | tar -C "$TDIR"/tar -x
-
-# use ls-tree instead of submodule-foreach to capture submodule revision associated with supermodule rev.
-#
-# sub-modules appear in tree as eg.:
-#  160000 commit c3a6cfcf0dad4a4eeecf59b474710d06ff3eb68a  modules/ca
-git ls-tree -r $TOPREV | awk '/^[0-9]+ commit / {print $3, $4}' | \
-while read HASH MODDIR
-do
-    echo "Visiting $HASH $MODDIR"
-    git -C $MODDIR archive --prefix=${PREFIX}${MODDIR}/ $HASH | tar -C "$TDIR"/tar -x
-done
-
-# make a list of files copied and filter out undesirables
-
-(cd "$TDIR"/tar && find . -mindepth 1 -not -type d) > "$TDIR"/list.1
-
-# Remove leading ./ from filenames
-sed -i -e 's|^\./||' "$TDIR"/list.1
-
-# Exclude files
-sed \
-  -e '/\/\.\?ci\//d' \
-  -e '/\/\.tools\//d' \
-  -e '/\/jenkins\//d' \
-  -e '/\/\.git/d' \
-  -e '/\/\.project$/d' \
-  -e '/\/\.travis\.yml$/d' \
-  -e '/\/\.appveyor\.yml$/d' \
-  "$TDIR"/list.1 > "$TDIR"/list.2
-
-if ! diff -U 0 "$TDIR"/list.1 "$TDIR"/list.2
-then
-    echo "Excluding the files shown above"
-fi
-
-# Use the filtered list to build the final tar
-#  The -a option chooses compression automatically based on output file name.
-
-tar -C "$TDIR"/tar --files-from="$TDIR"/list.2 -caf "$FINALTAR"
-
-echo "Wrote $FINALTAR"
-
-tar -taf "$FINALTAR" > "$TDIR"/list.3
-
-# make sure we haven't picked up anything extra
-if ! diff -u "$TDIR"/list.2 "$TDIR"/list.3
-then
-    echo "Oops! Tarfile diff against plan shown above"
-fi

.travis.yml

@@ -3,6 +3,16 @@ dist: trusty
 language: c
 compiler:
   - gcc
+env:
+  - CMPLR=gcc
+  - CMPLR=gcc EXTRA=CMD_CXXFLAGS=-std=c++11
+  - CMPLR=gcc STATIC=YES
+  - CMPLR=clang
+  - CMPLR=clang STATIC=YES
+  - WINE=32 TEST=NO STATIC=YES
+  - WINE=32 TEST=NO STATIC=NO
+  - RTEMS=4.10 TEST=NO
+  - RTEMS=4.9 TEST=NO
 addons:
   apt:
     packages:
@@ -18,16 +28,5 @@ addons:
 cache:
   directories:
    - $HOME/.cache
-install:
- - ./.ci/travis-prepare.sh
-script:
- - ./.ci/travis-build.sh
-env:
- - BRCORE=master BRLIBCOM=master BRCA=master
- - CMPLR=clang
- - USR_CXXFLAGS=-std=c++11
- - CMPLR=clang USR_CXXFLAGS=-std=c++11
- - WINE=32 TEST=NO STATIC=YES
- - WINE=32 TEST=NO STATIC=NO
- - RTEMS=4.10 TEST=NO
- - RTEMS=4.9 TEST=NO
+install: sh ci/travis-prepare.sh </dev/null
+script: sh ci/travis-build.sh </dev/null

Makefile

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 TOP = .
@@ -14,19 +14,8 @@ include $(TOP)/configure/CONFIG
 TOOLS = $(TOP)/src/tools
 
 DIRS += configure src
+
 src_DEPEND_DIRS = configure
 
-DIRS += test
-test_DEPEND_DIRS = src
-
-DIRS += modules
-modules_DEPEND_DIRS = src
-
 include $(TOP)/configure/RULES_TOP
 
-UNINSTALL_DIRS += $(INSTALL_LOCATION)/src
-copysrc:
-	tar cf - --exclude-vcs --exclude-backups --exclude=O.* modules/*/src | tar xf - -C $(INSTALL_LOCATION)
-
-tar:
-	tar cfjP epics_base-$(EPICS_VERSION_NUMBER).tar.bz2 $(INSTALL_LOCATION)

README

@@ -2,14 +2,14 @@
 EPICS Base - the central core of a control system toolkit
 ---------------------------------------------------------
 
-Copyright UChicago Argonne LLC, as Operator of Argonne
-National Laboratory.
+Copyright (c) 1991-2003 The University of Chicago, as Operator
+of Argonne National Laboratory.
 Copyright (c) 1991-2003 The Regents of the University of
 California, as Operator of Los Alamos National Laboratory.
 
-EPICS Base is distributed subject to a Software License
-Agreement found in the file LICENSE that is included with
-this distribution.
+EPICS Base Versions 3.13.7 and higher are distributed
+subject to a Software License Agreement found in the
+file LICENSE that is included with this distribution.
 
 ---------------------------------------------------------
 
@@ -22,6 +22,3 @@ training materials, additional components, links to other
 websites etc. is available on the EPICS home page at
 	https://epics.anl.gov/
 
-$Format:%cD$
-$Format:%H$
-https://code.launchpad.net/epics-base

appveyor.yml

@@ -16,7 +16,7 @@ init:
   - git config --global core.autocrlf true
 
 # Set clone depth (do not fetch complete history)
-clone_depth: 50
+clone_depth: 2
 
 # Skipping commits affecting only specific files
 skip_commits:
@@ -66,14 +66,13 @@ matrix:
 #---------------------------------#
 
 install:
-  - cmd: git submodule update --init --recursive
-  - cmd: .ci/appveyor-prepare.bat
+  - cmd: ci/appveyor-prepare.bat
 
 build_script:
-  - cmd: .ci/appveyor-make.bat
+  - cmd: ci/appveyor-make.bat
 
 test_script:
-  - cmd: .ci/appveyor-make.bat runtests
+  - cmd: ci/appveyor-make.bat runtests
 
 #---------------------------------#
 #         notifications           #

ci/travis-build.sh

@@ -17,7 +17,7 @@ ticker() {
 
 CACHEKEY=1
 
-EPICS_HOST_ARCH=`sh startup/EpicsHostArch`
+EPICS_HOST_ARCH=`perl src/tools/EpicsHostArch.pl`
 
 [ -e configure/os/CONFIG_SITE.Common.linux-x86 ] || die "Wrong location: $PWD"
 
@@ -85,6 +85,6 @@ make -j2 $EXTRA
 
 if [ "$TEST" != "NO" ]
 then
-   make -j2 tapfiles
+   make tapfiles
    make -s test-results
 fi

ci/travis-prepare.sh

@@ -38,9 +38,3 @@ then
 fi
 
 cd "$CURDIR"
-
-cat <<EOF >> configure/CONFIG_SITE
-USR_CPPFLAGS += $USR_CPPFLAGS
-USR_CFLAGS += $USR_CFLAGS
-USR_CXXFLAGS += $USR_CXXFLAGS
-EOF

configure/CONFIG

@@ -20,11 +20,14 @@ else
 endif
 
 # Provide a default if the user hasn't set EPICS_HOST_ARCH
-ifeq ($(strip $(EPICS_HOST_ARCH)),)
-  # NB: We must set the environment variable for submodules to include
-  # the correct modules/RELEASE.<host>.local file to set EPICS_BASE,
-  # they can't do this for themselves since CONFIG is relative to it:
-  export EPICS_HOST_ARCH := $(shell $(CONFIG)/../startup/EpicsHostArch.pl)
+#
+ifeq ($(origin EPICS_HOST_ARCH), undefined)
+  # Bootstrapping ...
+  EHA := $(firstword $(wildcard $(EPICS_BASE)/lib/perl/EpicsHostArch.pl \
+        $(TOP)/src/tools/EpicsHostArch.pl))
+  # NB: We use a simply expanded variable here for performance:
+  export EPICS_HOST_ARCH := $(shell perl $(EHA))
+  EHA :=
 endif
 
 -include $(CONFIG)/RELEASE

configure/CONFIG_ADDONS

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #	check for add-on CFLAGS and CXXFLAGS
@@ -37,6 +37,9 @@
 #    PROD_LIBS     libs needed by PROD and TESTPROD
 #    LIB_LIBS      libs needed by shared LIBRARY
 #    SHRLIB_LIBS   libs needed by shared LIBRARY
+#    USR_OBJLIBS   R3.13 vxWorks object libs needed building libraries and prods
+#    PROD_OBJLIBS  R3.13 vxWorks object    libs needed for building prods
+#    LIB_OBJLIBS   R3.13 vxWorks object libs needed for building libraries
 #    USR_SYS_LIBS  system libs needed building libraries and prods
 #    PROD_SYS_LIBS system libs needed for building prods
 #    LIB_SYS_LIBS  system libs needed for building libraries
@@ -270,6 +273,30 @@ OBJS_HOST+=$(OBJS_HOST_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(PROD_OBJLIBS_$(OS_CLASS))),)
+PROD_OBJLIBS+=$(subst -nil-,,$(PROD_OBJLIBS_$(OS_CLASS)))
+else
+ifdef PROD_OBJLIBS_DEFAULT
+PROD_OBJLIBS+=$(PROD_OBJLIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(LIB_OBJLIBS_$(OS_CLASS))),)
+LIB_OBJLIBS+=$(subst -nil-,,$(LIB_OBJLIBS_$(OS_CLASS)))
+else
+ifdef LIB_OBJLIBS_DEFAULT
+LIB_OBJLIBS+=$(LIB_OBJLIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(USR_OBJLIBS_$(OS_CLASS))),)
+USR_OBJLIBS+=$(subst -nil-,,$(USR_OBJLIBS_$(OS_CLASS)))
+else
+ifdef USR_OBJLIBS_DEFAULT
+USR_OBJLIBS+=$(USR_OBJLIBS_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(LIB_OBJS_$(OS_CLASS))),)
 LIB_OBJS+=$(subst -nil-,,$(LIB_OBJS_$(OS_CLASS)))
 else
@@ -554,3 +581,4 @@ ifdef LIB_RCS_DEFAULT
 LIB_RCS+=$(LIB_RCS_DEFAULT)
 endif
 endif
+

configure/CONFIG_BASE

@@ -3,12 +3,13 @@
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 #---------------------------------------------------------------
-# EPICS Base directories
+# Epics base directories
 
 EPICS_BASE_HOST_BIN = $(EPICS_BASE)/bin/$(EPICS_HOST_ARCH)
 EPICS_BASE_HOST_LIB = $(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)
@@ -17,6 +18,17 @@ ifdef T_A
   EPICS_BASE_BIN    = $(EPICS_BASE)/bin/$(T_A)
 endif
 
+#---------------------------------------------------------------
+# Epics base Ioc libraries 
+
+EPICS_BASE_IOC_LIBS += dbRecStd dbCore ca Com 
+
+#---------------------------------------------------------------
+# Epics base Host libraries 
+
+EPICS_BASE_HOST_LIBS += cas gdd
+EPICS_BASE_HOST_LIBS += ca Com
+
 #---------------------------------------------------------------
 # Version number for base shared libraries (and win32 products)
 
@@ -27,6 +39,17 @@ ifdef BASE_TOP
   PROD_VERSION = $(EPICS_VERSION).$(EPICS_REVISION)
 endif # BASE_TOP
 
+#---------------------------------------------------------------
+# Base c preprocessor flags
+
+BASE_CPPFLAGS = 
+
+# osithread default stack
+OSITHREAD_USE_DEFAULT_STACK = NO
+OSITHREAD_DEFAULT_STACK_FLAGS_YES = -DOSITHREAD_USE_DEFAULT_STACK
+OSITHREAD_DEFAULT_STACK_FLAGS_NO =
+BASE_CPPFLAGS += $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))
+
 #---------------------------------------------------------------
 # Where to find the installed build tools
 #   Windows does not like commands with relative paths starting ../
@@ -36,21 +59,60 @@ TOOLS = $(abspath $(EPICS_BASE_HOST_BIN))
 FIND_TOOL = $(firstword $(wildcard $(TOOLS)/$(1) $(TOP)/src/tools/$(1)))
 
 #---------------------------------------------------------------
-# EPICS Base build tools and tool flags
+# Epics base build tools and tool flags
 
-PODTOHTML        = $(PERL) $(TOOLS)/podToHtml.pl
-CONVERTRELEASE   = $(PERL) $(call FIND_TOOL,convertRelease.pl)
-FULLPATHNAME     = $(PERL) $(TOOLS)/fullPathName.pl
-TAPTOJUNIT       = $(PERL) $(TOOLS)/tap-to-junit-xml.pl
-GENVERSIONHEADER = $(PERL) $(TOOLS)/genVersionHeader.pl $(QUIET_FLAG)
+MAKEBPT                    = $(TOOLS)/makeBpt$(HOSTEXE)
+DBEXPAND                   = $(PERL) $(TOOLS)/dbdExpand.pl
+DBTORECORDTYPEH            = $(PERL) $(TOOLS)/dbdToRecordtypeH.pl
+DBTOMENUH                  = $(PERL) $(TOOLS)/dbdToMenuH.pl
+REGISTERRECORDDEVICEDRIVER = $(PERL) $(TOOLS)/registerRecordDeviceDriver.pl
+CONVERTRELEASE             = $(PERL) $(call FIND_TOOL,convertRelease.pl)
+FULLPATHNAME               = $(PERL) $(TOOLS)/fullPathName.pl
+TAPTOJUNIT                 = $(PERL) $(TOOLS)/tap-to-junit-xml.pl
 
-#---------------------------------------------------------------
+#-------------------------------------------------------
 # tools for installing libraries and products
-INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(QUIET_FLAG)
+INSTALL_QUIETLY := $(if $(findstring s,$(MAKEFLAGS)),-q,)
+INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(INSTALL_QUIETLY)
 INSTALL_PRODUCT = $(INSTALL)
 INSTALL_LIBRARY = $(INSTALL)
 
 #---------------------------------------------------------------
-# tools for making header dependencies and variable replacement
-MKMF       = $(PERL) $(TOOLS)/mkmf.pl
-REPLACEVAR = $(PERL) $(TOOLS)/replaceVAR.pl
+# tools for making header dependancies and variable replacement
+MKMF                       = $(PERL) $(TOOLS)/mkmf.pl
+REPLACEVAR                 = $(PERL) $(TOOLS)/replaceVAR.pl
+
+#---------------------------------------------------------------
+# private versions of lex/yacc from EPICS
+EYACC = $(TOOLS)/antelope$(HOSTEXE)
+ELEX = $(TOOLS)/e_flex$(HOSTEXE) -S$(EPICS_BASE)/include/flex.skel.static
+
+YACC  = $(EYACC)
+LEX   = $(ELEX)
+
+#---------------------------------------------------------------
+# Our use of msi is incompatible with older versions
+
+MSI3_15 = $(EPICS_BASE_HOST_BIN)/msi
+
+#---------------------------------------------------------------
+# External tools and tool flags - must be in path or defined in application
+
+ADL2DL ?= adl2dl
+
+# sch2edif compiler and flags
+SCH2EDIF = sch2edif
+SCH2EDIF_PATH =
+SCH2EDIF_SYSFLAGS = -n -ap -p.+..+$(SCH2EDIF_PATH)+$(CAPFAST_TEMPLATES)/sym+
+SCH2EDIF_FLAGS =
+ 
+# e2db and flags
+#    - again there is an assumption where edb.def is installed.
+E2DB ?= e2db
+E2DB_SYSFLAGS = -ate -d $(CAPFAST_TEMPLATES)/edb.def
+E2DB_FLAGS =
+
+DBST ?= dbst
+
+
+

configure/CONFIG_BASE_VERSION

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# in the file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #  EPICS Version information
@@ -15,43 +15,31 @@
 # EPICS_SITE_VERSION is defined in CONFIG_SITE for sites that want a local
 # version number to be included in the reported version string.
 
-# We define BASE_3_14 and BASE_3_15 as NO and BASE_3_16 as YES, so
-#   ifdef BASE_3_14
-#       true for 3.14 or later
-#   ifdef BASE_3_15
-#       true for 3.15 or later
-#   ifeq ($(BASE_3_14),YES)
-#       true for 3.14.x only
-#   ifeq ($(BASE_3_15),YES)
-#       true for 3.15 only
-#   ifeq ($(BASE_3_16),YES)
-#       true for 3.16 only.
-
+# In 3.15 we still define BASE_3_14 so "ifdef BASE_3_14" means
+# 3.14 or later, but "ifeq ($(BASE_3_14),YES)" means 3.14 only.
 BASE_3_14 = NO
-BASE_3_15 = NO
-BASE_3_16 = NO
-BASE_7_0  = YES
+BASE_3_15 = YES
 
 # EPICS_VERSION must be a number >0 and <256
-EPICS_VERSION = 7
+EPICS_VERSION = 3
 
 # EPICS_REVISION must be a number >=0 and <256
-EPICS_REVISION = 0
+EPICS_REVISION = 15
 
 # EPICS_MODIFICATION must be a number >=0 and <256
-EPICS_MODIFICATION = 1
+EPICS_MODIFICATION = 6
 
 # EPICS_PATCH_LEVEL must be a number (win32 resource file requirement)
 # Not included if zero
-EPICS_PATCH_LEVEL = 2
+EPICS_PATCH_LEVEL = 0
 
 # This will end in -DEV between official releases
-EPICS_DEV_SNAPSHOT=-DEV
+#EPICS_DEV_SNAPSHOT=-DEV
 #EPICS_DEV_SNAPSHOT=-pre1
 #EPICS_DEV_SNAPSHOT=-pre1-DEV
 #EPICS_DEV_SNAPSHOT=-pre2
 #EPICS_DEV_SNAPSHOT=-pre2-DEV
-#EPICS_DEV_SNAPSHOT=-rc1
+EPICS_DEV_SNAPSHOT=-rc1
 #EPICS_DEV_SNAPSHOT=-rc1-DEV
 #EPICS_DEV_SNAPSHOT=-rc2
 #EPICS_DEV_SNAPSHOT=-rc2-DEV

configure/CONFIG_COMMON

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #  CONFIG_COMMON
@@ -38,6 +38,10 @@ BUILD_ARCHS = $(EPICS_HOST_ARCH) $(CROSS1) $(CROSS2)
 # otherwise override this in os/CONFIG_SITE.<host_arch>.Common
 PERL = perl -CSD
 
+#-------------------------------------------------------
+# dbst based database optimization default
+DB_OPT = NO
+
 #-------------------------------------------------------
 # Check configure/RELEASE file for consistency
 CHECK_RELEASE_YES = checkRelease
@@ -79,7 +83,6 @@ IOCS_APPL_TOP               = $(shell $(FULLPATHNAME) $(INSTALL_LOCATION))
 # Make echo output - suppress echoing if make's '-s' flag is set
 NOP = :
 ECHO = @$(if $(findstring s,$(patsubst T_A=%,,$(MAKEFLAGS))),$(NOP),echo)
-QUIET_FLAG := $(if $(findstring s,$(MAKEFLAGS)),-q,)
 
 #-------------------------------------------------------
 ifdef T_A
@@ -163,13 +166,13 @@ TESTSHRLIBNAME = $(TESTSHRLIBNAME_$(SHARED_LIBRARIES))
 #--------------------------------------------------
 # obj files
 
-TARGET_OBJS =  $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS) $($*_SRCS)))
+TARGET_OBJS =  $($*_OBJLIBS) $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS) $($*_SRCS)))
 
 PRODUCT_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(PROD_SRCS) $(USR_OBJS) $(PROD_OBJS)))
-PROD_LD_OBJS = $(TARGET_OBJS) $(PRODUCT_OBJS)
+PROD_LD_OBJS = $(USR_OBJLIBS) $(PROD_OBJLIBS) $(TARGET_OBJS) $(PRODUCT_OBJS)
 
 LIBRARY_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(LIB_SRCS) $(LIBSRCS) $(USR_OBJS) $(LIB_OBJS)))
-LIBRARY_LD_OBJS = $(TARGET_OBJS) $(LIBRARY_OBJS)
+LIBRARY_LD_OBJS = $(USR_OBJLIBS) $(LIB_OBJLIBS) $(TARGET_OBJS) $(LIBRARY_OBJS)
 
 #--------------------------------------------------
 # Windows resource files
@@ -261,7 +264,7 @@ LIBRARY_SRCS=$(basename $(foreach lib,$(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRA
 LIBRARY_SRC_CFLAGS=$($(patsubst $*,SHRLIB,$(findstring $*,$(LIBRARY_SRCS)))_CFLAGS)
 
 #--------------------------------------------------
-# prefix, suffix, and ldflags for loadable shared libraries
+# prefix, suffix, and ldflags for loadable shared libraries 
 TARGET_LIB_LDFLAGS=$($(patsubst $*,LOADABLE_,$(findstring $*,$(LOADABLE_LIBRARY)))SHRLIB_LDFLAGS)
 LOADABLE_SHRLIB_PREFIX=$(SHRLIB_PREFIX)
 LOADABLE_SHRLIB_SUFFIX=$(SHRLIB_SUFFIX)
@@ -329,14 +332,6 @@ COMPILE.cpp = $(CCC) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES)
 # C preprocessor command
 PREPROCESS.cpp = $(CPP) $(CPPFLAGS) $(INCLUDES) $< > $@
 
-#--------------------------------------------------
-# genVersion header defaults
-
-# C macro name
-GENVERSIONMACRO = VCSVERSION
-# C macro default value (empty to use date+time)
-GENVERSIONDEFAULT =
-
 #--------------------------------------------------
 # Header dependency file generation
 
@@ -459,5 +454,5 @@ COMMON_INC += $(filter $(COMMON_DIR)/%, $(foreach file, $(INC), \
 SOURCE_INC = $(wildcard $(file) $(SOURCE_INC_bbb) )
 SOURCE_INC_bbb = $(foreach dir, $(ALL_SRC_DIRS), $(SOURCE_INC_aaa)  )
 SOURCE_INC_aaa = $(addsuffix /$(file), $(dir) )
-
+ 
 endif

configure/CONFIG_ENV

@@ -35,10 +35,8 @@ EPICS_CA_CONN_TMO=30.0
 EPICS_CA_REPEATER_PORT=5065
 EPICS_CA_SERVER_PORT=5064
 EPICS_CA_MAX_ARRAY_BYTES=16384
-EPICS_CA_AUTO_ARRAY_BYTES=YES
 EPICS_CA_BEACON_PERIOD=15.0
 EPICS_CA_MAX_SEARCH_PERIOD=300.0
-EPICS_CA_MCAST_TTL=1
 EPICS_CAS_BEACON_PERIOD=
 EPICS_CAS_BEACON_PORT=
 EPICS_CAS_AUTO_BEACON_ADDR_LIST=""
@@ -47,9 +45,6 @@ EPICS_CAS_SERVER_PORT=
 EPICS_CAS_INTF_ADDR_LIST=""
 EPICS_CAS_IGNORE_ADDR_LIST=""
 
-# Servers to disable
-EPICS_IOC_IGNORE_SERVERS=""
-
 # Log Server:
 # EPICS_IOC_LOG_PORT Log server port number etc.
 EPICS_IOC_LOG_PORT=7004

configure/CONFIG_SITE

@@ -161,7 +161,7 @@ USE_POSIX_THREAD_PRIORITY_SCHEDULING = YES
 
 # Site version number, if set will append '-' and this string to the
 #  EPICS version number string that is reported by many tools.
-EPICS_SITE_VERSION:=$(shell date +%Y-%m)
+EPICS_SITE_VERSION =
 
 # For GNU compiler, use pipes rather than temporary files for
 #  communication between the various stages of compilation.

configure/CONFIG_SITE_ENV

@@ -69,11 +69,8 @@ EPICS_TS_NTP_INET=
 #	Prompt string
 # IOCSH_HISTSIZE
 #	Number of lines of command history to keep.
-# IOCSH_HISTEDIT_DISABLE
-# 	Prevents use of readline or equivalent if defined.
 IOCSH_PS1="epics> "
 IOCSH_HISTSIZE=50
-IOCSH_HISTEDIT_DISABLE=
 
 # Log Server:
 # EPICS_IOC_LOG_INET 

configure/RULES.Db

@@ -8,12 +8,10 @@
 #*************************************************************************
 #RULES.Db
 
-# Set db substitutions and template file suffixes
+# Set db substitutions file suffix
 SUBST_SUFFIX ?= .substitutions
-TEMPL_SUFFIX ?= .template
 
-#---------------------------------------------------------------
-# vpath
+#####################################################  vpath
 
 vpath %.pm $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.pod $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
@@ -21,13 +19,12 @@ vpath %.dbd $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.db $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %.vdb $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %$(SUBST_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
-vpath %$(TEMPL_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
+vpath %.template $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath bpt%.data $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acf $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acs $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 
-#---------------------------------------------------------------
-# dbflags dbdflags
+##################################################### dbflags dbdflags
 
 DBD_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DBD) $(RELEASE_DBD_DIRS)
 DB_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DB) $(RELEASE_DB_DIRS)
@@ -36,15 +33,13 @@ DBDFLAGS = $(USR_DBDFLAGS) $(CMD_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
 DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(CMD_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
 REGRDDFLAGS = $(DBDFLAGS) $($*_REGRDDFLAGS) $(USR_REGRDDFLAGS) $(CMD_REGRDDFLAGS)
 
-#---------------------------------------------------------------
-# Targets
+##################################################### Targets
 
 # ---------------------------------------------------
 # To allow os specific dbd files AND have the -j option work properly,
 
-CROSS_TARGET_OS_TYPES = $(sort $(foreach target, \
-    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS), \
-    $(firstword $(subst -, ,$(target)))))
+CROSS_TARGET_OS_TYPES = $(sort $(foreach target,  \
+    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS),$(firstword $(subst -, ,$(target)))))
 DBD += $(foreach type, $(CROSS_TARGET_OS_TYPES), $(DBD_$(type)))
 
 # Users add os specific dbd files to a Makefile as follows
@@ -91,28 +86,31 @@ SOURCE_DB_bbb = $(foreach dir, $(GENERIC_SRC_DIRS), $(SOURCE_DB_aaa)  )
 SOURCE_DB_aaa = $(addsuffix /$(file), $(dir) )
 
 COMMONS = $(COMMON_DIR)/*.dbd $(COMMON_DIR)/*.db $(COMMON_DIR)/*.h \
-          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*$(TEMPL_SUFFIX)
+          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*.template
 
 # Remove trailing numbers (to 99) on stem
-TEMPLATE1 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
-            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
-            $(patsubst %8,%,$(patsubst %9,%,$*))))))))))
-TEMPLATE2 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
-            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
-            $(patsubst %8,%,$(patsubst %9,%,$(TEMPLATE1)))))))))))
-TEMPLATE3 = $(addsuffix $(TEMPL_SUFFIX),$(addprefix ../,$(TEMPLATE2)))
-TEMPLATE_FILENAME = $(firstword $(wildcard $($*_TEMPLATE) \
-            $(addprefix ../,$($*_TEMPLATE)) ../$*$(TEMPL_SUFFIX) $(TEMPLATE3) \
-            ../template))
+TEMPLATE1=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
+          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
+          $*))))))))))
+TEMPLATE2=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
+          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
+          $(TEMPLATE1)))))))))))
+TEMPLATE3=$(addsuffix .template,$(addprefix ../,$(TEMPLATE2)))
+TEMPLATE_FILENAME=$(firstword $(wildcard $($*_TEMPLATE) $(addprefix ../,$($*_TEMPLATE)) ../$*.template $(TEMPLATE3) ../template))
+
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+RAW=.raw
+DBS = $(filter %.db,$(DB)) $(addsuffix $(RAW),$(filter %.db,$(DB)))
+COMMON_DBS = $(addprefix $(COMMON_DIR)/,$(DBS))
+endif
 
 INSTALL_DB_INSTALLS = $(addprefix $(INSTALL_DB)/,$(notdir $(DB_INSTALLS)))
 INSTALL_DBD_INSTALLS = $(addprefix $(INSTALL_DBD)/,$(notdir $(DBD_INSTALLS)))
 
 COMMONDEP_TARGET = $(COMMON_DIR)/$(basename $@)
 
-#---------------------------------------------------------------
-# acf files
-
+#####################################################  acf files
 # An access security configuration file, *.acf, can be created from
 # an *.acs file (has format of acf file plus #include "filename" lines)
 
@@ -125,8 +123,7 @@ ACF_INCLUDES = -I. $(TARGET_INCLUDES) $(USR_INCLUDES)\
 ACFDEPENDS_CMD = $(MKMF) -m $@ $(ACF_INCLUDES) $(COMMONDEP_TARGET) $<
 ACF_CMD = $(CPP) $(ACF_CPPFLAGS) $(ACF_INCLUDES) $< > $@
 
-#---------------------------------------------------------------
-# dependencies
+#####################################################  dependancies
 
 HINC += $(addsuffix .h,$(DBDINC_NAME))
 COMMON_DBDINC += $(addprefix $(COMMON_DIR)/,$(HINC))
@@ -136,12 +133,12 @@ DBDDEPENDS_FILES += $(addsuffix $(DEP),$(HINC) \
                     $(patsubst $(COMMON_DIR)/%,%, \
                     $(filter-out $(COMMON_DIR)/bpt%.dbd,$(COMMON_DBDS))))
 
-#---------------------------------------------------------------
+##################################################### 
 
 ifndef T_A
 
 DEP = .d
-TEMPLATE3 += $(addsuffix $(TEMPL_SUFFIX), $(TEMPLATE2))
+TEMPLATE3+=$(addsuffix .template, $(TEMPLATE2))
 
 COMMON_DIR = .
 INSTALL_DBDS =
@@ -156,13 +153,18 @@ ACTIONS += install
 ACTIONS += buildInstall
 ACTIONS += runtests tapfiles clean-tests test-results junitfiles
 
-actionArchTargets = $(foreach action, $(ACTIONS), \
-    $(foreach arch, $(BUILD_ARCHS), $(action)$(DIVIDER)$(arch)))
-cleanArchTargets = $(foreach arch, $(BUILD_ARCHS), clean$(DIVIDER)$(arch))
+actionArchTargets = $(foreach x, $(ACTIONS),\ $(foreach arch,$(BUILD_ARCHS), $(x)$(DIVIDER)$(arch)))
 
+cleanArchTargets = $(foreach arch,$(BUILD_ARCHS), clean$(DIVIDER)$(arch))
 -include $(TOP)/configure/CONFIG_APP_INCLUDE
 
 all: install
+ifeq ($(EPICS_HOST_ARCH),$T_A)
+host: install
+else
+# Do nothing
+host:
+endif
 
 install: buildInstall
 
@@ -170,30 +172,20 @@ buildInstall : build
 
 rebuild: clean install
 
-.PHONY: all $(ACTIONS)
+.PHONY: all host $(ACTIONS)
 
 $(actionArchTargets) $(BUILD_ARCHS): install
 $(cleanArchTargets): clean
 
 .PHONY: $(BUILD_ARCHS) $(actionArchTargets) $(cleanArchTargets)
 
-else
-  # T_A is defined
-  ifeq ($(EPICS_HOST_ARCH),$(T_A))
-    host: install
-  else
-    host:
-  endif
-
-  .PHONY: host
-endif # T_A
+endif # T_A defined
 
 ifneq (,$(strip $(DBDDEPENDS_FILES)))
 -include $(DBDDEPENDS_FILES)
 endif
 
-#---------------------------------------------------------------
-# build dependancies, clean rule
+#####################################################  build dependancies, clean rule
 
 inc : $(COMMON_INC) $(INSTALL_INC)
 
@@ -213,8 +205,7 @@ db_clean :
 
 realclean: clean
 
-#---------------------------------------------------------------
-# Dependency files
+##################################################### Dependency files
 
 %Record.h$(DEP): $(COMMON_DIR)/%Record.dbd
 	@$(RM) $@
@@ -265,19 +256,19 @@ menu%.h$(DEP): ../menu%.dbd
 	@$(DBEXPAND) -D $(DBDFLAGS) -o $(COMMONDEP_TARGET) $($*_DBD) > $@
 	@echo "$(COMMONDEP_TARGET): ../Makefile" >> $@
 
-%.db$(DEP): %$(SUBST_SUFFIX)
+%.db$(RAW)$(DEP): %$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(DEP): ../%$(SUBST_SUFFIX)
+%.db$(RAW)$(DEP): ../%$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(DEP): %$(TEMPL_SUFFIX)
+%.db$(RAW)$(DEP): %.template
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
-%.db$(DEP): ../%$(TEMPL_SUFFIX)
+%.db$(RAW)$(DEP): ../%.template
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
@@ -291,8 +282,14 @@ menu%.h$(DEP): ../menu%.dbd
 
 .PRECIOUS: %$(DEP)
 
-#---------------------------------------------------------------
-# Substitution files
+##################################################### CapFast filter
+
+$(COMMON_DIR)/%.edf: ../%.sch $(DEPSCHS) 
+	@$(RM) $@
+	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
+	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) -o $@  $<
+
+##################################################### Substitution files
 
 #  WARNING: CREATESUBSTITUTIONS script needs output dir on command line
 
@@ -313,21 +310,25 @@ $(INSTALL_DB)/%$(SUBST_SUFFIX): ../%$(SUBST_SUFFIX)
 
 .PRECIOUS: $(COMMON_DIR)/%$(SUBST_SUFFIX)
 
-#---------------------------------------------------------------
-# Template files
+##################################################### Template files
 
-$(INSTALL_DB)/%$(TEMPL_SUFFIX): %$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.template: $(COMMON_DIR)/%.edf 
+	@$(RM) $@
+	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $@.VAR $<
+	@$(REPLACEVAR) < $@.VAR > $@
+	@$(RM) $@.VAR
+
+$(INSTALL_DB)/%.template: %.template
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-$(INSTALL_DB)/%$(TEMPL_SUFFIX): ../%$(TEMPL_SUFFIX)
+$(INSTALL_DB)/%.template: ../%.template
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-.PRECIOUS: $(COMMON_DIR)/%$(TEMPL_SUFFIX)
+.PRECIOUS: $(COMMON_DIR)/%.template
 
-#---------------------------------------------------------------
-# INC files
+##################################################### INC files
 
 $(COMMON_DIR)/%Record.h: $(COMMON_DIR)/%Record.dbd
 	@$(RM) $(notdir $@)
@@ -361,8 +362,7 @@ $(COMMON_DIR)/menu%.h: ../menu%.dbd
 
 .PRECIOUS: $(COMMON_DIR)/%.h
 
-#---------------------------------------------------------------
-# DBD files
+##################################################### DBD files
 
 $(COMMON_DIR)/bpt%.dbd: bpt%.data
 	@$(RM) $(notdir $@)
@@ -425,64 +425,56 @@ $(foreach file, $(DBD_INSTALLS), $(eval $(call DBD_INSTALLS_template, $(file))))
 
 .PRECIOUS: $(COMMON_DBDS) $(COMMON_DIR)/%.dbd
 
-#---------------------------------------------------------------
-# HTML files
+##################################################### HTML files
 
-$(COMMON_DIR)/%.html: %.dbd.pod
+$(COMMON_DIR)/%.html: %.dbd.pod $(TOOLS)/dbdToHtml.pl
 	@$(RM) $(notdir $@)
-	$(DBDTOHTML) $(DBDFLAGS) -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/dbdToHtml.pl $(DBDFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: %.pod
+$(COMMON_DIR)/%.html: %.pod $(TOOLS)/podToHtml.pl
 	@$(RM) $(notdir $@)
-	$(PODTOHTML) -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: %.pm
+$(COMMON_DIR)/%.html: %.pm $(TOOLS)/podToHtml.pl
 	@$(RM) $(notdir $@)
-	$(PODTOHTML) -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: ../%.pm
+$(COMMON_DIR)/%.html: ../%.pm $(TOOLS)/podToHtml.pl
 	@$(RM) $(notdir $@)
-	$(PODTOHTML) -s -o $(notdir $@) $<
-	@$(MKDIR) $(dir $@)
-	@$(MV) $(notdir $@) $@
-
-$(COMMON_DIR)/%.html: ../%.pl
-	@$(RM) $(notdir $@)
-	$(PODTOHTML) -s -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
 .PRECIOUS: $(COMMON_DIR)/%.html %.html
 
-#---------------------------------------------------------------
-# DB files
+##################################################### DB files
 
-$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.edf 
+$(COMMON_DIR)/%.db$(RAW): $(COMMON_DIR)/%.edf 
 	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $*.VAR $<
 	@$(REPLACEVAR) < $*.VAR > $@
 	@$(RM) $*.VAR
 
-$(COMMON_DIR)/%.db: %$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): %$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: ../%$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): ../%$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: %$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): %.template
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: ../%$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): ../%.template
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
@@ -500,6 +492,22 @@ $(COMMON_DIR)/%.acf: ../%.acs
 
 .PRECIOUS: $(COMMON_DIR)/%.acf
 
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+
+$(COMMON_DIR)/%.db$(RAW): ../%.db
+	@$(RM) $@
+	$(CP) $< $@
+
+$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.db$(RAW)
+	$(ECHO) "Optimizing database $@"
+	@$(RM) $@
+	$(DBST) . $< -d > $@
+
+.PRECIOUS: $(COMMON_DIR)/%.db
+.PRECIOUS: $(DB:%=$(COMMON_DIR)/%$(RAW))
+else
+
 $(INSTALL_DB)/%: %
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -507,6 +515,7 @@ $(INSTALL_DB)/%: %
 $(INSTALL_DB)/%: ../%
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
+endif
 
 $(INSTALL_DB)/%.db: $(COMMON_DIR)/%.db
 	$(ECHO) "Installing created db file $@"
@@ -522,8 +531,8 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 .PRECIOUS: $(COMMON_DIR)/%.edf
 .PRECIOUS: $(COMMON_DBS)
 
-#---------------------------------------------------------------
-# register record,device,driver support
+##################################################### register record,device,driver support
+
 
 %_registerRecordDeviceDriver.cpp: $(COMMON_DIR)/%.dbd
 	@$(RM) $@
@@ -539,3 +548,4 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 
 .PRECIOUS: %_registerRecordDeviceDriver.cpp
 
+##################################################### END OF FILE

configure/RULES_BUILD

@@ -83,23 +83,6 @@ endif
 
 -include $(CONFIG)/RULES.Db
 
-#---------------------------------------------------------------
-# Do not build anything if current path matches SKIP_BUILD
-
-ifneq (,$(strip $(SKIP_BUILDS)))
-CURRENT_MODULE=$(subst $(realpath $(TOP)/..)/,,$(subst $(realpath $(dir $(lastword $(MAKEFILE_LIST)))..)/,,$(realpath ..)))
-ifneq ($(filter $(SKIP_BUILDS) $(addsuffix /%,$(SKIP_BUILDS)),$(CURRENT_MODULE)),)
-$(info Skipping $(CURRENT_MODULE) for $(T_A))
-PROD=
-TESTPROD=
-LIBRARY=
-TESTLIBRARY=
-LOADABLE_LIBRARY=
-TESTS=
-SRC_FILES=
-endif
-endif
-
 #---------------------------------------------------------------
 # Include defines and rules for prod, library and test* targets
 
@@ -273,15 +256,13 @@ YACCOPT ?= $($*_YACCOPT)
 	$(MV) $*.tab.c $*.c
 	$(if $(findstring -d, $(YACCOPT)),$(MV) $*.tab.h $*.h,)
 
-# must be a seperate rule since when not using '-d' the
+# must be a separate rule since when not using '-d' the
 # prefix for .h will be different then .c
 %.h : %.c %.y
 
 %.c: %.l
-	@$(RM) $*.yy.c
-	$(LEX) $(LEXOPT) -t $< > $*.yy.c
 	@$(RM) $@
-	$(MV) $*.yy.c $@
+	$(LEX) $(LEXOPT) -o$@ $<
 
 #---------------------------------------------------------------
 # Libraries, shared/DLL and stubs
@@ -351,12 +332,6 @@ $(MODNAME): %$(MODEXT): %$(EXE)
 	@$(RM) $@
 	$(LINK.mod)
 
-#---------------------------------------------------------------
-# Generate Perl include path module
-%ModuleDirs.pm: $(wildcard $(TOP)/configure/RELEASE*)
-	@$(MKDIR) $(dir $@)
-	$(CONVERTRELEASE) -T $(TOP) $@
-
 #---------------------------------------------------------------
 # Automated testing
 
@@ -403,7 +378,7 @@ endif
 # If there's a perl test script (.plt) available, use it
 %.t: ../%.plt
 	@$(RM) $@
-	$(EXPAND_TOOL) -t $(INSTALL_LOCATION) -a $(T_A) $< $@
+	$(CP) $< $@
 
 # Test programs (.t files) must be written in Perl.
 # Generate a perl program to exec the real test binary.
@@ -411,14 +386,6 @@ endif
 	@$(RM) $@
 	$(PERL) $(TOOLS)/makeTestfile.pl $@ $<
 
-#---------------------------------------------------------------
-# Generate header with version number from VCS
-
-ifneq ($(GENVERSION),)
-$(COMMON_DIR)/$(GENVERSION): FORCE
-	$(GENVERSIONHEADER) -t $(TOP) -N $(GENVERSIONMACRO) -V "$(GENVERSIONDEFAULT)" $@
-endif
-
 #---------------------------------------------------------------
 # Install rules for BIN_INSTALLS and LIB_INSTALLS
 
@@ -494,7 +461,6 @@ ifneq (,$(strip $(LOADABLE_SHRLIB_VERSION)))
 endif # LOADABLE_SHRLIB_VERSION
 endif # LOADABLE_SHRLIB_SUFFIX
 
-ifneq ($(INSTALL_CONFIGS),)
 $(INSTALL_CONFIG)/%: %
 	$(ECHO) "Installing config file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -502,7 +468,6 @@ $(INSTALL_CONFIG)/%: %
 $(INSTALL_CONFIG)/%: ../%
 	$(ECHO) "Installing config file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
-endif
 
 $(INSTALL_INCLUDE)/% : $(COMMON_DIR)/%
 	$(ECHO) "Installing generated generic include file $@"
@@ -555,7 +520,7 @@ $(INSTALL_TEMPLATES_SUBDIR)/%: %
 
 .PHONY: all host inc build install clean rebuild buildInstall build_clean
 .PHONY: runtests tapfiles clean-tests test-results junitfiles
-.PHONY: checkRelease warnRelease noCheckRelease FORCE
+.PHONY: checkRelease warnRelease noCheckRelease
 
 endif # BASE_RULES_BUILD
 #	EOF RULES_BUILD

configure/RULES_TARGET

@@ -20,7 +20,7 @@ $(1)_$(2) += $$(if $$(strip $$($(1)_$(2)_$$(OS_CLASS))), \
              $$($(1)_$(2)_DEFAULT))
 endef
 
-$(foreach type, SRCS RCS OBJS LDFLAGS LDOBJS SYS_LIBS , \
+$(foreach type, SRCS RCS OBJS LDFLAGS OBJLIBS LDOBJS SYS_LIBS , \
 $(foreach target, $(PROD) $(TESTPROD) $(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRARY) , \
     $(eval $(call TARGET_template,$(strip $(target)),$(type)))))
 
@@ -152,3 +152,4 @@ $(foreach target, $(LOADABLE_LIBRARY), \
     $(eval $(call LOADABLE_LIBRARY_template,$(strip $(target)))))
 
 #-----------------------------------------------------------------------
+

configure/RULES_TOP

@@ -21,9 +21,6 @@ realuninstall: uninstallDirs
 
 UNINSTALL_DIRS += $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC) \
     $(INSTALL_HTML) $(INSTALL_TEMPLATES) $(INSTALL_DB) $(DIRECTORY_TARGETS)
-ifneq ($(INSTALL_LOCATION),$(TOP))
-UNINSTALL_DIRS += $(INSTALL_CONFIG)
-endif
 uninstallDirs:
 	$(RMDIR) $(UNINSTALL_DIRS)
 

configure/os/CONFIG.Common.RHEL7-x86_64

@@ -1,4 +0,0 @@
-# Include definitions common to linux pentium targets
-include $(CONFIG)/os/CONFIG.Common.linux-x86_64
-
-COMMANDLINE_LIBRARY = READLINE

configure/os/CONFIG.Common.RHEL7-x86_64-clang

@@ -1,3 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.linux-clang
-
-COMMANDLINE_LIBRARY = READLINE

configure/os/CONFIG.Common.SL5-x86

@@ -1,6 +0,0 @@
-# Include definitions common to linux pentium targets
-include $(CONFIG)/os/CONFIG.Common.linux-x86
-
-COMMANDLINE_LIBRARY = READLINE_NCURSES
-
-ARCH_DEP_CFLAGS += -march=i686

configure/os/CONFIG.Common.SL5-x86_64

@@ -1,4 +0,0 @@
-# Include definitions common to linux pentium targets
-include $(CONFIG)/os/CONFIG.Common.linux-x86_64
-
-COMMANDLINE_LIBRARY = READLINE_NCURSES

configure/os/CONFIG.Common.SL6-x86

@@ -1,9 +0,0 @@
-# Include definitions common to linux pentium targets
-include $(CONFIG)/os/CONFIG.Common.linux-x86
-
-COMMANDLINE_LIBRARY = READLINE
-
-ARCH_DEP_CFLAGS += -march=i686
-
-# remove warning in anyscalar.h
-ARCH_DEP_CXXFLAGS += -fno-strict-aliasing

configure/os/CONFIG.Common.SL6-x86_64

@@ -1,7 +0,0 @@
-# Include definitions common to linux pentium targets
-include $(CONFIG)/os/CONFIG.Common.linux-x86_64
-
-COMMANDLINE_LIBRARY = READLINE
-
-# remove warning in anyscalar.h
-ARCH_DEP_CXXFLAGS += -fno-strict-aliasing

configure/os/CONFIG.Common.SL6-x86_64-clang

@@ -1,3 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.linux-clang
-
-COMMANDLINE_LIBRARY = READLINE

configure/os/CONFIG.Common.T2-ppc604

@@ -1,8 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
-VXWORKS_VERSION = 5.5.1
-WIND_BASE = /afs/psi.ch/project/vxworks/Tornado2.2.1
-
-#there is a problem with our ccppc and optimization
-# -O0 works, -O and -O1 and higher are buggy
-OPT_CFLAGS_YES = -O0
-OPT_CXXFLAGS_YES = -O0

configure/os/CONFIG.Common.UnixCommon

@@ -18,10 +18,8 @@ OBJ = .o
 LIB_PREFIX = lib
 LIB_SUFFIX = .a
 SHRLIB_SUFFIX_BASE = .so
-#SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)$(addprefix .,$(SHRLIB_VERSION))
-SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
-#LOADABLE_SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)$(addprefix .,$(LOADABLE_SHRLIB_VERSION))
-LOADABLE_SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
+SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)$(addprefix .,$(SHRLIB_VERSION))
+LOADABLE_SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)$(addprefix .,$(LOADABLE_SHRLIB_VERSION))
 LOADABLE_SHRLIB_PREFIX = lib
 
 #-------------------------------------------------------

configure/os/CONFIG.Common.V62-ppc604

@@ -1,2 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
-VXWORKS_VERSION = 6.2

configure/os/CONFIG.Common.V63-ppc603

@@ -1,5 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc603_long
-VXWORKS_VERSION = 6.3
-
-# Buggy "uninitialized variable" warning produces many false positives
-ARCH_DEP_CXXFLAGS += -Wno-uninitialized

configure/os/CONFIG.Common.V63-ppc604

@@ -1,5 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
-VXWORKS_VERSION = 6.3
-
-# Buggy "uninitialized variable" warning produces many false positives
-ARCH_DEP_CXXFLAGS += -Wno-uninitialized

configure/os/CONFIG.Common.V66-ppc603

@@ -1,2 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc603_long
-VXWORKS_VERSION = 6.6

configure/os/CONFIG.Common.V66-ppc604

@@ -1,2 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
-VXWORKS_VERSION = 6.6

configure/os/CONFIG.Common.V67-ppc604

@@ -1,5 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
-VXWORKS_VERSION = 6.7
-
-#needed when including memPartLib.h, e.g. through moduleLib.h or loadLib.h
-ARCH_DEP_CFLAGS += -D_VSB_CONFIG_FILE='<../lib/h/config/vsbConfig.h>'

configure/os/CONFIG.Common.eldk42-ppc4xxFP

@@ -1,25 +0,0 @@
-# DeltaTau PowerPMAC with ELDK 4.2
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-COMMANDLINE_LIBRARY = READLINE_NCURSES
-
-ARCH_CLASS = ppc
-
-ELDK=/opt/eldk-4.2
-GNU_TARGET=ppc_4xxFP
-GNU_DIR=$(ELDK)/usr
-
-# This cross tool chain is installed in a somehow weired way
-# Without the following lines it does not work on RHEL7
-# but it worked on SL6
-ARCH_DEP_CXXFLAGS += -I $(ELDK)/$(GNU_TARGET)/usr/include/c++/4.2.2 
-ARCH_DEP_CXXFLAGS += -I $(ELDK)/$(GNU_TARGET)/usr/include/c++/4.2.2/powerpc-linux 
-ARCH_DEP_CXXFLAGS += -I $(ELDK)/$(GNU_TARGET)/usr/include/c++/4.2.2/backward 
-
-ARCH_DEP_LDFLAGS += -Wl,-rpath-link,$(ELDK)/$(GNU_TARGET)/lib
-ARCH_DEP_LDFLAGS += -Wl,-rpath-link,$(ELDK)/$(GNU_TARGET)/usr/lib
-
-# Some drivers complain
-ARCH_DEP_CFLAGS += -fno-strict-aliasing

configure/os/CONFIG.Common.eldk51-ppc4xxSF

@@ -1,16 +0,0 @@
-# Virtex FPGA embedded Processor with ELDK 5.1
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-COMMANDLINE_LIBRARY = READLINE
-
-ARCH_CLASS = ppc
-
-SDK = eldk
-SDK_DIR = /opt/eldk-5.1
-SDK_HOST_ARCH = $(GNU_HOST_ARCH)-$(SDK)-$(GNU_HOST_OS)
-GNU_TARGET = powerpc-4xx-softfloat
-GNU_ARCH = ppc405-linux
-GNU_DIR = $(SDK_DIR)/$(GNU_TARGET)/sysroots/$(SDK_HOST_ARCH)/usr
-GNU_BIN = $(GNU_DIR)/bin/$(GNU_ARCH)

configure/os/CONFIG.Common.eldk52-e500v2

@@ -1,17 +0,0 @@
-# IOxOS IFC1210 with ELDK 5.2
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-COMMANDLINE_LIBRARY = READLINE
-
-ARCH_CLASS = ppc
-
-SDK = eldk
-SDK_DIR = /opt/eldk-5.2
-SDK_HOST_ARCH = $(GNU_HOST_ARCH)-$(SDK)-$(GNU_HOST_OS)
-GNU_TARGET = powerpc-e500v2
-GNU_ARCH = ppce500v2-linux-gnuspe
-GNU_DIR = $(SDK_DIR)/$(GNU_TARGET)/sysroots/$(SDK_HOST_ARCH)/usr
-GNU_BIN = $(GNU_DIR)/bin/$(GNU_ARCH)
-GNU_TARGET_INCLUDE_DIR =

configure/os/CONFIG.Common.eldk53-ppc4xxFP

@@ -1,23 +0,0 @@
-# DeltaTau PowerPMAC with ELDK 5.2
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-COMMANDLINE_LIBRARY = READLINE
-
-ARCH_CLASS = ppc
-
-SDK = eldk
-SDK_DIR = /opt/eldk-5.3
-SDK_HOST_ARCH = $(GNU_HOST_ARCH)-$(SDK)-$(GNU_HOST_OS)
-GNU_ARCH = ppc440e-linux
-SDKTARGETSYSROOT=$(SDK_DIR)/powerpc-4xx/sysroots
-GNU_DIR = $(SDKTARGETSYSROOT)/$(SDK_HOST_ARCH)/usr
-GNU_BIN = $(GNU_DIR)/bin/$(GNU_ARCH)
-GNU_TARGET_INCLUDE_DIR =
-GNU_TARGET=powerpc-linux
-
-ARCH_DEP_CPPFLAGS =  -m32 -mcpu=440fp -mhard-float
-ARCH_DEP_CPPFLAGS += --sysroot=$(SDKTARGETSYSROOT)/$(GNU_ARCH)
-ARCH_DEP_LDFLAGS =   --sysroot=$(SDKTARGETSYSROOT)/$(GNU_ARCH)
-AS=$(GNU_BIN)/$(GNU_TARGET)-as

configure/os/CONFIG.Common.fslqoriq20-e6500_64

@@ -1,25 +0,0 @@
-# IOxOS IFC1211 with Freescale QorIQ 2.0 toolchain
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-COMMANDLINE_LIBRARY = READLINE
-
-ARCH_CLASS = ppc
-
-SDK = fslsdk
-SDK_DIR = /opt/fsl-qoriq/2.0
-SDK_HOST_ARCH = $(GNU_HOST_ARCH_64)-$(SDK)-$(GNU_HOST_OS)
-SDK_TARGET = ppc64e6500-fsl-linux
-GNU_TARGET = powerpc64-fsl-linux
-SDKTARGETSYSROOT = $(SDK_DIR)/sysroots/$(SDK_TARGET)
-GNU_DIR = $(SDK_DIR)/sysroots/$(SDK_HOST_ARCH)/usr
-GNU_BIN = $(GNU_DIR)/bin/$(GNU_TARGET)
-
-ARCH_DEP_CPPFLAGS = --sysroot=$(SDKTARGETSYSROOT)
-ARCH_DEP_CFLAGS = -mcpu=e6500 -m64 -mhard-float
-ARCH_DEP_LDFLAGS = --sysroot=$(SDKTARGETSYSROOT)
-
-# warning -O2 and higher are broken!
-#OPT_CFLAGS_YES = -O1
-#OPT_CXXFLAGS_YES = -O1

configure/os/CONFIG.Common.linux-clang

@@ -1,5 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-GNU         = NO
-CMPLR_CLASS = clang
-CC          = clang
-CCC         = clang++

configure/os/CONFIG.Common.moxa42-armv6l

@@ -1,19 +0,0 @@
-# Moxa DA-66x with SDK 4.2 and ARM7 processor
-
-# Include definitions common to all Linux ARM targets
-include $(CONFIG)/os/CONFIG.Common.linux-arm
-
-GNU_DIR=/afs/psi.ch/project/embeddedlinux/moxa/arm-linux-4.4.2-v4
-GNU_TARGET=arm
-ARCH_DEP_LDFLAGS+=-Wl,-rpath-link,$(GNU_DIR)/arm-none-linux-gnueabi/lib
-ARCH_DEP_LDFLAGS+=-Wl,-rpath-link,$(INSTALL_LIB)
-
-COMMANDLINE_LIBRARY = READLINE_NCURSES
-
-# suppress note "the mangling of 'va_list' has changed in GCC 4.4"
-ARCH_DEP_CXXFLAGS += -Wno-psabi
-
-ARCH_DEP_CFLAGS += -funwind-tables
-
-# remove warning in anyscalar.h
-ARCH_DEP_CXXFLAGS += -fno-strict-aliasing

configure/os/CONFIG.Common.mvl40-xscale_be

@@ -1,15 +0,0 @@
-# Moxa DA-66x with Montavista Linux 4.0
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-COMMANDLINE_LIBRARY = READLINE_CURSES
-
-ARCH_CLASS = xscale
-
-GNU_DIR=/afs/psi.ch/project/embeddedlinux/moxa/xscale_be/armv5teb-montavista-linuxeabi
-
-ARCH_DEP_CFLAGS += -funwind-tables
-
-# Cannot build PVA because of missing boost support
-SKIP_BUILDS = pv% normativeTypes

configure/os/CONFIG.Common.raspbian-arm

@@ -1,43 +0,0 @@
-# RaspberryPi with github.com/raspberrypi/tools toolchain
-# Tested on:
-# * Raspberry 3B+ Raspbian 9
-# * Raspberry 2   Raspbian 7
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-# Using readline:
-# Due to missing/messed up libs in the toolchain, readline needs copies of
-# libtinfo.so.5.9 and libreadline.so.6.2 from a Raspbian 7 rootfs 
-# /lib/arm-linux-gnueabihf/ to the toolchain, e.g.
-# $(SDK_DIR)/gcc-linaro-arm-linux-gnueabihf-raspbian/arm-linux-gnueabihf/libc/lib/arm-linux-gnueabihf/
-# and manually created links libtinfo.so.5 and libreadline.so.
-# For gcc-linaro-arm-linux-gnueabihf-raspbian, an existing incompatible
-# libtinfo.so.5 is in the way. Remove it.
-# (Built with glibc 2.16 like installed on Raspbian 9 but toolchain uses glibc 2.13.)
-# Also copy /usr/include/readline/ directory from some readline 6 installation
-# to $(SDK_DIR)/gcc-linaro-arm-linux-gnueabihf-raspbian/arm-linux-gnueabihf/libc/usr/include/
-
-COMMANDLINE_LIBRARY = READLINE
-
-ARCH_CLASS = arm
-
-SDK_DIR = /opt/raspberrypi/arm-bcm2708
-
-# Available SDK_TARGETs:
-
-# gcc 4.8.3 for 32 bit hosts with GLIBC 2.3 or higher
-SDK_TARGET = gcc-linaro-arm-linux-gnueabihf-raspbian
-
-# gcc 4.8.3 for 64 bit hosts with GLIBC 2.14 or higher
-# SDK_TARGET = gcc-linaro-arm-linux-gnueabihf-raspbian-x64
-
-# gcc 4.7.1 for 64 bit hosts with GLIBC 2.8 or higher
-# SDK_TARGET = arm-linux-gnueabihf
-
-# gcc 4.7.1 for 32 bit hosts with GLIBC 2.4 or higher
-# SDK_TARGET = arm-bcm2708hardfp-linux-gnueabi
-# SDK_TARGET = arm-bcm2708-linux-gnueabi
-
-GNU_DIR = $(SDK_DIR)/$(SDK_TARGET)
-GNU_TARGET = $(if $(filter arm-bcm2708%,SDK_TARGET),$(SDK_TARGET),arm-linux-gnueabihf)

configure/os/CONFIG.Common.vxWorksCommon

@@ -1,7 +1,7 @@
 # CONFIG.Common.vxWorksCommon
 #
 # Definitions for vxWorks target archs
-# Override these definitions in CONFIG_SITE.Common.vxWorksCommon
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorksCommon
 # or CONFIG_SITE.<host>.vxWorksCommon
 #-------------------------------------------------------
 
@@ -63,7 +63,8 @@ VXWORKS_MAJOR_VERSION = $(basename $(basename $(VXWORKS_VERSION)))
 
 # These are needed for vxWorks 6.x; the GNU toolset version number
 # is in the path to the compiler tools:
-VX_GNU_VERSION_5   = 2.96
+VX_GNU_VERSION_5.4 = 2.95
+VX_GNU_VERSION_5.5 = 2.96
 VX_GNU_VERSION_6.0 = 3.3.2
 VX_GNU_VERSION_6.1 = 3.3.2
 VX_GNU_VERSION_6.2 = 3.3.2
@@ -74,22 +75,17 @@ VX_GNU_VERSION_6.6 = 4.1.2
 VX_GNU_VERSION_6.7 = 4.1.2
 VX_GNU_VERSION_6.8 = 4.1.2
 VX_GNU_VERSION_6.9 = 4.3.3
-VX_GNU_VERSION_6 = $(VX_GNU_VERSION_$(VXWORKS_VERSION))
-VX_GNU_VERSION = $(VX_GNU_VERSION_$(VXWORKS_MAJOR_VERSION))
+VX_GNU_VERSION = $(VX_GNU_VERSION_$(VXWORKS_VERSION))
 
 VX_GNU_MAJOR_VERSION = $(basename $(basename $(VX_GNU_VERSION)))
-VX_GNU_MINOR_VERSION = $(basename $(patsubst $(VX_GNU_MAJOR_VERSION).%,%,$(VX_GNU_VERSION)))
-
-# gcc version before 3.4 are "old" and need special treatment
-VX_OLD_GCC_2   = OLD
-VX_OLD_GCC_3.3 = OLD
-VX_OLD_GCC_3   = $(VX_OLD_GCC_3.$(VX_GNU_MINOR_VERSION))
-VX_OLD_GCC = $(VX_OLD_GCC_$(VX_GNU_MAJOR_VERSION))
 
 #--------------------------------------------------
-# Fix old Linux WIND_HOST_TYPE
+# Fix WIND_BASE for vxWorks 6.x on linux
+# NB: We know the value of WIND_HOST_TYPE here, but not VXWORKS_VERSION
 ifeq ($(WIND_HOST_TYPE),x86-linux)
-  WIND_HOST_TYPE = x86-linux2
+  WIND_HOST_TYPE_5 = x86-linux
+  WIND_HOST_TYPE_6 = x86-linux2
+  WIND_HOST_TYPE = $(WIND_HOST_TYPE_$(VXWORKS_MAJOR_VERSION))
 endif
 
 #--------------------------------------------------
@@ -101,7 +97,6 @@ VX_DIR = $(VX_DIR_$(VXWORKS_MAJOR_VERSION))
 VX_INCLUDE_DIRS_5 = $(VX_DIR)/target/h
 VX_INCLUDE_DIRS_6 = $(VX_DIR)/target/h $(VX_DIR)/target/h/wrn/coreip
 GNU_TARGET_INCLUDE_DIR = $(VX_INCLUDE_DIRS_$(VXWORKS_MAJOR_VERSION))
-TARGET_CPPFLAGS = -isystem $(VX_DIR)/target/h
 
 #--------------------------------------------------
 # vxWorks GNU directories
@@ -118,7 +113,9 @@ NM = $(firstword $(wildcard $(WIND_BASE)/*/$(WIND_HOST_TYPE)/bin/$(NMPROG)))
 
 #--------------------------------------------------
 # A linker script is essential for munching from vxWorks 6.6 onwards
-# (i.e. with versions that use gcc 4.1.2 or later).
+# (i.e. with versions that use gcc 4.1.2 or later).  It can be used
+# with any vxWorks 5 or 6 version, but apparently should not be used
+# when compiling for 68K (which isn't supported in vxWorks 6 anyway)
 MUNCH_LDFLAGS_6 = -T $(VX_DIR)/target/h/tool/gnu/ldscripts/link.OUT
 MUNCH_LDFLAGS = $(MUNCH_LDFLAGS_$(VXWORKS_MAJOR_VERSION))
 
@@ -134,10 +131,11 @@ export TOOL_FAMILY = GNU
 OP_SYS_CPPFLAGS += -DvxWorks=vxWorks
 OP_SYS_CFLAGS += -fno-builtin
 
-# Fix for vxWorks headers that use macros defined in vxWorks.h but
+# Fix for vxWorks 5 headers that use macros defined in vxWorks.h but
 # which don't actually include vxWorks.h themselves, for example the
 # target/h/sys/stat.h file which uses ULONG.  This also stops dbDefs.h
-# from defining the OFFSET macro, which generates lots of warnings.
+# from defining the OFFSET macro, which generates lots of warnings in
+# both vxWorks 5 and 6.
 OP_SYS_INCLUDE_CPPFLAGS += -include $(VX_DIR)/target/h/vxWorks.h
 
 #--------------------------------------------------
@@ -149,23 +147,13 @@ OPT_CXXFLAGS_YES = -O2
 # code flags
 CODE_CFLAGS =
 #
-# For gcc versions before 3.4 we need this g++ compiler flag
-# However WindRiver says gcc 3.3 does not need it any more
-# which would allow to build vxWorks 6 without this flag.
-# Maybe we can live without it at the penalty of larger code.
-# See vxWorks 5 docs/gnu2.96+ppc/gcc.html
-# chapter 4.5 "Where's the Template?"
-CODE_CXXFLAGS_OLD = -fno-implicit-templates
-CODE_CXXFLAGS = $(CODE_CXXFLAGS_$(VX_OLD_GCC))
-
-#--------------------------------------------------
-# Modules we cannot build with old compiler
-
-PV_MODULES = pv% normativeTypes
-SKIP_BUILDS_5 = $(PV_MODULES)
-SKIP_BUILDS_OLD = $(PV_MODULES)
-SKIP_BUILDS_6 = $(SKIP_BUILDS_$(VX_OLD_GCC))
-SKIP_BUILDS = $(SKIP_BUILDS_$(VXWORKS_MAJOR_VERSION))
+# For vxWorks versions before 6.3 we need this g++ compiler flag
+CODE_CXXFLAGS_5 = -fno-implicit-templates
+CODE_CXXFLAGS_6.0 = -fno-implicit-templates
+CODE_CXXFLAGS_6.1 = -fno-implicit-templates
+CODE_CXXFLAGS_6.2 = -fno-implicit-templates
+CODE_CXXFLAGS_6 = $(CODE_CXXFLAGS_$(VXWORKS_VERSION))
+CODE_CXXFLAGS = $(CODE_CXXFLAGS_$(VXWORKS_MAJOR_VERSION))
 
 #--------------------------------------------------
 # no shared libs for vxWorks
@@ -197,10 +185,6 @@ COMPILE.ctdt = $(CC) -c $(CPPFLAGS) $(CFLAGS_ctdt) $(INCLUDES) $(SOURCE_FLAG)
 VXCPPFLAGS = $(filter-out $(OP_SYS_INCLUDE_CPPFLAGS),$(CPPFLAGS))
 PREPROCESS.cpp = $(CPP) $(VXCPPFLAGS) $(INCLUDES) $< > $@
 
-#--------------------------------------------------
-# Use LEDLIB for command-line editing
-COMMANDLINE_LIBRARY = LEDLIB
-
 #--------------------------------------------------
 # Allow site overrides
 -include $(CONFIG)/os/CONFIG_SITE.Common.vxWorksCommon

configure/os/CONFIG.Common.yocto21-aarch64

@@ -1,20 +0,0 @@
-# XILINX Zynq with Yocto 2.1 / Petalinux toolchain
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-COMMANDLINE_LIBRARY = READLINE
-
-ARCH_CLASS = arm64
-
-SDK = petalinux
-SDK_DIR = /opt/petalinux-gfa/2017.2
-SDK_HOST_ARCH = $(GNU_HOST_ARCH_64)-$(SDK)-$(GNU_HOST_OS)
-SDK_TARGET = aarch64-xilinx-linux
-GNU_TARGET = $(SDK_TARGET)
-SDKTARGETSYSROOT = $(SDK_DIR)/sysroots/$(SDK_TARGET)
-GNU_DIR = $(SDK_DIR)/sysroots/$(SDK_HOST_ARCH)/usr
-GNU_BIN = $(GNU_DIR)/bin/$(GNU_TARGET)
-
-ARCH_DEP_CPPFLAGS = --sysroot=$(SDKTARGETSYSROOT)
-ARCH_DEP_LDFLAGS = --sysroot=$(SDKTARGETSYSROOT)

configure/os/CONFIG.RHEL7-x86_64.Common

@@ -1,3 +0,0 @@
-#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
-#Include definitions common to linux hosts
-include $(CONFIG)/os/CONFIG.linux-x86_64.Common

configure/os/CONFIG.RHEL7-x86_64.RHEL7-x86_64

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.RHEL7-x86_64.SL6-x86

@@ -1,16 +0,0 @@
-# "cross compile" for older Linux version
-# Use older compiler and older libraries
-# Used packages:
-# compat-gcc-44-c++-4.4
-# compat-gcc-44-4.4
-# compat-glibc-headers-2.12-4
-# It was neccessary to install 32 bit compatibility libraries manually
-#-------------------------------------------------------
-
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
-CC = $(GNU_BIN)/$(CMPLR_PREFIX)gcc44
-CCC = $(GNU_BIN)/$(CMPLR_PREFIX)g++44
-
-TARGET_CPPFLAGS = -isystem /usr/lib/x86_64-redhat-linux6E/include
-TARGET_LDFLAGS = -L /usr/lib/x86_64-redhat-linux6E/lib 
-LINK.cpp += --as-needed -lc -lm -lrt -lpthread -lreadline -ltinfo

configure/os/CONFIG.RHEL7-x86_64.SL6-x86_64

@@ -1,16 +0,0 @@
-# "cross compile" for older Linux version
-# Use older compiler and older libraries
-# Used packages:
-# compat-gcc-44-c++-4.4
-# compat-gcc-44-4.4
-# compat-glibc-headers-2.12-4
-# compat-glibc-2.12-4
-#-------------------------------------------------------
-
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
-CC = $(GNU_BIN)/$(CMPLR_PREFIX)gcc44
-CCC = $(GNU_BIN)/$(CMPLR_PREFIX)g++44
-
-TARGET_CPPFLAGS = -isystem /usr/lib/x86_64-redhat-linux6E/include
-TARGET_LDFLAGS = -L /usr/lib/x86_64-redhat-linux6E/lib64
-LINK.cpp += --as-needed -lc -lm -lrt -lpthread -lreadline -ltinfo

configure/os/CONFIG.SL5-x86.Common

@@ -1,3 +0,0 @@
-#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
-#Include definitions common to linux hosts
-include $(CONFIG)/os/CONFIG.linux-x86.Common

configure/os/CONFIG.SL5-x86.SL5-x86

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.SL5-x86_64.Common

@@ -1,3 +0,0 @@
-#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
-#Include definitions common to linux hosts
-include $(CONFIG)/os/CONFIG.linux-x86_64.Common

configure/os/CONFIG.SL5-x86_64.SL5-x86_64

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.SL6-x86.Common

@@ -1,2 +0,0 @@
-#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
-#Include definitions common to linux hosts

configure/os/CONFIG.SL6-x86.SL6-x86

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.SL6-x86_64.Common

@@ -1,3 +0,0 @@
-#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
-#Include definitions common to linux hosts
-include $(CONFIG)/os/CONFIG.linux-x86_64.Common

configure/os/CONFIG.SL6-x86_64.SL6-x86

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.SL6-x86_64.SL6-x86_64

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.UnixCommon.Common

@@ -8,7 +8,7 @@
 CP = cp
 MV = mv
 RM = rm -f
-MKDIR = mkdir -p
+MKDIR = mkdir
 RMDIR = rm -rf
 CAT = cat
 

configure/os/CONFIG.darwinCommon.darwinCommon

@@ -65,14 +65,14 @@ GNU = NO
 #
 # Darwin shared libraries
 #
-SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined suppress \
+SHRLIB_LDFLAGS = -dynamiclib -undefined dynamic_lookup \
     -install_name $(shell $(FULLPATHNAME) $(INSTALL_LIB))/$@ \
     $(addprefix -compatibility_version , $(SHRLIB_VERSION)) \
     $(addprefix -current_version , $(SHRLIB_VERSION))
 SHRLIB_SUFFIX_BASE = .dylib
 SHRLIB_SUFFIX = $(addprefix ., $(SHRLIB_VERSION))$(SHRLIB_SUFFIX_BASE)
 
-LOADABLE_SHRLIB_LDFLAGS = -bundle -flat_namespace -undefined suppress
+LOADABLE_SHRLIB_LDFLAGS = -bundle -undefined dynamic_lookup
 
 #
 # Position-independent code is the default on Darwin.

configure/os/CONFIG.linux-386.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-486.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-586.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-686.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-x86.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-x86_64.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG_SITE.Common.vxWorksCommon

@@ -1,13 +1,21 @@
 # CONFIG_SITE.Common.vxWorksCommon
 #
 # Site specific definitions for vxWorks target builds.
+# Only the local epics system manager should modify this file
 
 # Compiler options can vary with the vxWorks version number, so we
-# need to know that.  Do not include any third-level digits.
+# need to know that.  However don't include any third-level digits
+# (e.g. the .2 in 5.5.2) because we don't need them.
 
-# Note: vxWorks 5.4.x and 5.5.x (Tornado 2.x) are not supported.
-# VxWorks 6.0 through 6.5 use older, untested versions of GCC.
+# Note: vxWorks 5.4.x (Tornado 2.0.x) is not supported
 
+#VXWORKS_VERSION = 5.5
+#VXWORKS_VERSION = 6.0
+#VXWORKS_VERSION = 6.1
+#VXWORKS_VERSION = 6.2
+#VXWORKS_VERSION = 6.3
+#VXWORKS_VERSION = 6.4
+#VXWORKS_VERSION = 6.5
 #VXWORKS_VERSION = 6.6
 #VXWORKS_VERSION = 6.7
 #VXWORKS_VERSION = 6.8
@@ -19,8 +27,8 @@ VXWORKS_VERSION = 6.9
 # CONFIG_SITE.$(EPICS_HOST_ARCH).vxWorksCommon file.
 
 # WIND_BASE is where you installed the Wind River software.
+# Under vxWorks 6.x this is *not* the same as the old VX_DIR setting
 
 #WIND_BASE = /usr/local/vw/tornado22-$(ARCH_CLASS)
-#WIND_BASE = /usr/local/vw/vxWorks-$(VXWORKS_VERSION)
+WIND_BASE = /usr/local/vw/vxWorks-$(VXWORKS_VERSION)
 #WIND_BASE = /ade/vxWorks/$(VXWORKS_VERSION)
-WIND_BASE = /afs/psi.ch/project/vxworks/VxWorks$(VXWORKS_VERSION)

configure/os/CONFIG_SITE.RHEL7-x86_64.Common

@@ -1,13 +0,0 @@
-include $(CONFIG)/os/CONFIG_SITE.linux-x86_64.Common
-
-# Build 32 bit version as a cross architecture
-#CROSS_COMPILER_TARGET_ARCHS += RHEL7-x86
-
-# Improved error checking with clang
-CROSS_COMPILER_TARGET_ARCHS += RHEL7-x86_64-clang
-
-# Build for old SL6 64 bit
-CROSS_COMPILER_TARGET_ARCHS += SL6-x86_64
-
-# Build for old SL6 32 bit
-CROSS_COMPILER_TARGET_ARCHS += SL6-x86

configure/os/CONFIG_SITE.SL5-x86.Common

@@ -1 +0,0 @@
-include $(CONFIG)/os/CONFIG_SITE.linux-x86.Common

configure/os/CONFIG_SITE.SL5-x86_64.Common

@@ -1,3 +0,0 @@
-include $(CONFIG)/os/CONFIG_SITE.linux-x86.Common
-# Build 32 bit version as a cross architecture
-CROSS_COMPILER_TARGET_ARCHS += SL5-x86

configure/os/CONFIG_SITE.SL6-x86.Common

@@ -1 +0,0 @@
-include $(CONFIG)/os/CONFIG_SITE.linux-x86.Common

configure/os/CONFIG_SITE.SL6-x86_64.Common

@@ -1,7 +0,0 @@
-# Build 32 bit version as a cross architecture
-CROSS_COMPILER_TARGET_ARCHS += SL6-x86
-
-# Improved error checking with clang
-#CROSS_COMPILER_TARGET_ARCHS += SL6-x86_64-clang
-
-include $(CONFIG)/os/CONFIG_SITE.linux-x86_64.Common

configure/os/CONFIG_SITE.linux-x86.Common

@@ -1,40 +1,9 @@
-INSTALL_LOCATION=/usr/local/epics/base-7.0.1
-#EPICS_SITE_VERSION:=$(shell date +%Y-%m-%d)
+# CONFIG_SITE.linux-x86.Common
+#
+# Site override definitions for linux-x86 host builds
+#-------------------------------------------------------
 
-GNU_HOST_ARCH=i686
-GNU_HOST_OS=linux
-
-# vxWorks 5.5 for MVxxxx boards
-CROSS_COMPILER_TARGET_ARCHS += T2-ppc604
-
-# vxWorks 6.7 for MVxxxx boards
-CROSS_COMPILER_TARGET_ARCHS += V67-ppc604
-
-# NI compact RIO
-CROSS_COMPILER_TARGET_ARCHS += V63-ppc603
-
-# MOXA montavista linux (No PVA because of missing boost support)
-CROSS_COMPILER_TARGET_ARCHS += mvl40-xscale_be
-
-# MOXA SDK 4.2
-CROSS_COMPILER_TARGET_ARCHS += moxa42-armv6l
-
-# Virtex embedded PPC
-CROSS_COMPILER_TARGET_ARCHS += eldk51-ppc4xxSF
-
-# IOxOS IFC1210
-CROSS_COMPILER_TARGET_ARCHS += eldk52-e500v2
-
-# DeltaTau PowerPMAC
-CROSS_COMPILER_TARGET_ARCHS += eldk42-ppc4xxFP
-#CROSS_COMPILER_TARGET_ARCHS += eldk53-ppc4xxFP
-
-# Test other vxWorks versions
-#CROSS_COMPILER_TARGET_ARCHS += V66-ppc603
-CROSS_COMPILER_TARGET_ARCHS += V66-ppc604
-#CROSS_COMPILER_TARGET_ARCHS += V63-ppc604
-# (No PVA because of old compiler)
-CROSS_COMPILER_TARGET_ARCHS += V62-ppc604
-
-# Raspberry Pi
-CROSS_COMPILER_TARGET_ARCHS += raspbian-arm
+# JBA test override values
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040 solaris-sparc
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040
+#CROSS_COMPILER_TARGET_ARCHS = RTEMS-mvme2100 RTEMS-pc386 # RTEMS-mvme5500 RTEMS-mvme167

configure/os/CONFIG_SITE.linux-x86.linux-arm

@@ -8,8 +8,7 @@ GNU_TARGET = arm-xilinx-linux-gnueabi
 
 # Set GNU tools install path
 # Examples are installations at the APS:
-#GNU_DIR = /usr/local/vw/zynq-2011.09
-GNU_DIR = /usr/local/vw/zynq-2016.1/gnu/arm/lin
+GNU_DIR = /usr/local/vw/zynq-2011.09
 #GNU_DIR = /usr/local/Xilinx/SDK/2016.3/gnu/arm/lin
 #GNU_DIR = /APSshare/XilinxSDK/2015.4/gnu/arm/lin
 

configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw

@@ -14,10 +14,10 @@
 #GNU_DIR = /usr/local
 
 # Different distribution cross-build packages use different prefixes:
-# Ubuntu, RHEL7:
-CMPLR_PREFIX = i686-w64-mingw32-
-# RHEL6:
-#CMPLR_PREFIX = i686-pc-mingw32-
+# Ubuntu:
+#CMPLR_PREFIX = i686-w64-mingw32-
+# RHEL:
+CMPLR_PREFIX = i686-pc-mingw32-
 # Debian?
 #CMPLR_PREFIX = i586-mingw32msvc-
 

configure/os/CONFIG_SITE.linux-x86_64.Common

@@ -1,9 +1,9 @@
-include $(CONFIG)/os/CONFIG_SITE.linux-x86.Common
+# CONFIG_SITE.linux-x86_64.Common
+#
+# Site override definitions for linux-x86_64 host builds
+#-------------------------------------------------------
 
-GNU_HOST_ARCH_64=x86_64
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040 solaris-sparc
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040
+#CROSS_COMPILER_TARGET_ARCHS = RTEMS-mvme2100
 
-# IOxOS IFC1211
-CROSS_COMPILER_TARGET_ARCHS += fslqoriq20-e6500_64
-
-# Zynq
-CROSS_COMPILER_TARGET_ARCHS += yocto21-aarch64

documentation/KnownProblems.html

@@ -4,33 +4,25 @@
 <html xmlns="http://www.w3.org/1999/xhtml">
 <head>
   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
-  <title>Known Problems in EPICS 7.0.1</title>
+  <title>Known Problems in R3.15.6</title>
 </head>
 
 <body>
-<h1 style="text-align: center">EPICS 7.0.1: Known Problems</h1>
+<h1 style="text-align: center">EPICS Base R3.15.6: Known Problems</h1>
 
 <p>Any patch files linked below should be applied at the root of the
-base-7.0.1 tree. Download them, then use the GNU Patch program as
+base-3.15.6 tree. Download them, then use the GNU Patch program as
 follows:</p>
 
-<blockquote><pre>% <b>cd <i>/path/to/</i>base-7.0.1</b>
+<blockquote><pre>% <b>cd <i>/path/to/</i>base-3.15.6</b>
 % <b>patch -p1 &lt; <i>/path/to/</i>file.patch</b></pre></blockquote>
 
-<p>The following problems were known by the developers at the time of this
-release:</p>
+<p>The following significant problems have been reported with this
+version of EPICS Base:</p>
 
 <ul>
 
-<!-- Items added after release should be formatted thusly:
-  <li>YYYY-MM-DD: Description of problem.
-    <a href="fix.patch">This patch</a> fixes the problem.
-    ...</li>
--->
-
-  <li>IOCs running on some versions of Cygwin may display warnings at iocInit
-    about duplicate EPICS CA Address list entries. These warnings might be due
-    to a bug in Cygwin; they are benign and can be ignored.</li>
+  <li>None known as yet.</li>
 
 </ul>
 

documentation/README.1st

@@ -1,24 +1,24 @@
                            Installation Instructions
 
-                           EPICS Base Release 7.0.1.1
+                           EPICS Base Release 3.15.6
 
    --------------------------------------------------------------------------
 
   Table of Contents
 
-     * What is EPICS base?
-     * What is new in this release?
-     * Copyright
-     * Supported platforms
-     * Supported compilers
-     * Software requirements
-     * Host system storage requirements
-     * Documentation
-     * Directory Structure
-     * Build related components
-     * Building EPICS base (Unix and Win32)
-     * Example application and extension
-     * Multiple host platforms
+     * What is EPICS base?
+     * What is new in this release?
+     * Copyright
+     * Supported platforms
+     * Supported compilers
+     * Software requirements
+     * Host system storage requirements
+     * Documentation
+     * Directory Structure
+     * Build related components
+     * Building EPICS base (Unix and Win32)
+     * Example application and extension
+     * Multiple host platforms
 
    --------------------------------------------------------------------------
 
@@ -67,9 +67,8 @@
   Software requirements
 
      GNU make
-     You must use the GNU version of make for EPICS builds, and we now
-     recommend version 4.1 or later (version 3.82 may work on Linux, but
-     doesn't on Windows).
+     You must use GNU make, gnumake, for any EPICS builds. Set your path so
+     that a gnumake version 3.81 or later is available.
 
      Perl
      You must have Perl version 5.8.1 or later installed. The EPICS
@@ -86,31 +85,34 @@
      as processes on the host platform.
 
      vxWorks
-     You must have vxWorks 6 installed if any of your target systems are
-     vxWorks systems; the C++ compilers for vxWorks 5.x are now too old to
-     support. The vxWorks installation provides the cross-compiler and header
-     files needed to build for these targets. The absolute path to and the
-     version number of the vxWorks installation must be set in the
+     You must have vxWorks 5.5.x or 6.x installed if any of your target
+     systems are vxWorks systems; the C++ compiler for vxWorks 5.4 is now too
+     old to support. The vxWorks installation provides the cross-compiler and
+     header files needed to build for these targets. The absolute path to and
+     the version number of the vxWorks installation must be set in the
      base/configure/os/CONFIG_SITE.Common.vxWorksCommon file or in one of its
      target-specific overrides.
 
-     Consult the vxWorks 6.x EPICS web pages and the vxWorks documentation
-     for information about configuring your vxWorks operating system for use
-     with EPICS.
+     Consult the vxWorks 5.x or vxWorks 6.x EPICS web pages about and the
+     vxWorks documentation for information about configuring your vxWorks
+     operating system for use with EPICS.
 
      RTEMS
      For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or
-     4.10. The newer 4.11 or 5.x releases are not supported yet.
+     later.
 
-     Command-line editing libraries
-     GNU readline or other OS-specific libraries can be used by the IOC shell
-     to provide command line editing and history recall. The default setting
-     is different for each OS. On Linux the default is to use READLINE since
-     most distributions include it. On MacOS the default is also READLINE
-     since Apple provides a compatible library, although it isn't GNU. On
-     RTEMS we support GNU readline and Tecla, although the default is to use
-     neither since these have to be added to the RTEMS installation
-     separately. On vxWorks we support the built-in ledLib library.
+     GNU readline or Tecla library
+     GNU readline and Tecla libraries can be used by the IOC shell to provide
+     command line editing and command line history recall and edit. GNU
+     readline (or Tecla library) must be installed on your target system when
+     COMMANDLINE_LIBRARY is set to READLINE (or TECLA) for that target. EPICS
+     (EPICS shell) is the default specified in CONFIG_COMMON. A READLINE
+     override is defined for linux-x86 in the EPICS distribution. Comment out
+     COMMANDLINE_LIBRARY=READLINE in
+     configure/os/CONFIG_SITE.Common.linux-x86 if readline is not installed
+     on linux-x86. Command-line editing and history will then be those
+     supplied by the os. On vxWorks the ledLib command-line input library is
+     used instead.
 
   Host system storage requirements
 
@@ -164,12 +166,11 @@
 
     base/startup directory - contains scripts to set environment and path
 
-         EpicsHostArch       C shell script to set EPICS_HOST_ARCH env variable
-         EpicsHostArch.pl    Perl script to set EPICS_HOST_ARCH env variable
-         Site.profile        bourne shell script to set path and env variables
-         Site.cshrc          c shell script to set path and env variables
-         cygwin.bat          WIN32 bat file to set cygwin path and env variables
-         win32.bat           WIN32 bat file to set path and env variables
+         EpicsHostArch       Shell script to set EPICS_HOST_ARCH env variable
+         unix.csh            C shell script to set path and env variables
+         unix.sh             Bourne shell script to set path and env variables
+         win32.bat           Bat file example to configure win32-x86 target
+         windows.bat         Bat file example to configure windows-x64 target
 
     base/configure directory - contains build definitions and rules
 
@@ -223,13 +224,13 @@
        required path and other environment variables.
 
        EPICS_HOST_ARCH
-       Before you can build or use EPICS Base, the environment variable
-       EPICS_HOST_ARCH should be defined. A perl script EpicsHostArch.pl in
-       the base/startup directory has been provided to help set
-       EPICS_HOST_ARCH. You should have EPICS_HOST_ARCH set to your host
-       operating system followed by a dash and then your CPU architecture,
-       e.g. linux-x86_64. If you are not using the OS vendor's c/c++ compiler
-       for host builds, you will need another dash followed by the alternate
+       Before you can build or use EPICS R3.15, the environment variable
+       EPICS_HOST_ARCH must be defined. A perl script EpicsHostArch.pl in the
+       base/startup directory has been provided to help set EPICS_HOST_ARCH.
+       You should have EPICS_HOST_ARCH set to your host operating system
+       followed by a dash and then your host architecture, e.g.
+       solaris-sparc. If you are not using the OS vendor's c/c++ compiler for
+       host builds, you will need another dash followed by the alternate
        compiler name (e.g. "-gnu" for GNU c/c++ compilers on a solaris host
        or "-mingw" for MinGW c/c++ compilers on a WIN32 host). See
        configure/CONFIG_SITE for a list of supported EPICS_HOST_ARCH values.
@@ -248,7 +249,7 @@
        solaris systems you need uname in your path.
 
        LD_LIBRARY_PATH
-       EPICS shared libraries and executables normally contain the full path
+       R3.15 shared libraries and executables normally contain the full path
        to any libraries they require. However, if you move the EPICS files or
        directories from their build-time location then in order for the
        shared libraries to be found at runtime LD_LIBRARY_PATH must include
@@ -311,7 +312,7 @@
      script will create a sample application that can be built and then
      executed to try out this release of base.
 
-     Instructions for building and executing the example IOC application can
+     Instructions for building and executing the 3.15 example application can
      be found in the section "Example Application" of Chapter 2, "Getting
      Started", in the "IOC Application Developer's Guide" for this release.
      The "Example IOC Application" section briefly explains how to create and

documentation/README.darwin.html

@@ -21,7 +21,7 @@ of my Bash login script (~/.bash_login):
 #
 EPICS_BASE="${HOME}/src/EPICS/base"
 EPICS_EXTENSIONS="${HOME}/src/EPICS/extensions"
-<strong>.</strong> "${EPICS_BASE}"/startup/Site.profile
+<strong>.</strong> "${EPICS_BASE}"/startup/unix.sh
 </pre>
 </li>
 <li>

documentation/README.html

@@ -9,7 +9,7 @@
 <BODY>
 <CENTER>
 <H1>Installation Instructions</H1>
-<H2>EPICS Base Release 7.0.1.1</H2><BR>
+<H2>EPICS Base Release 3.15.6</H2><BR>
 </CENTER>
 <HR>
 <H3> Table of Contents</H3>
@@ -72,8 +72,8 @@
 <H3><A NAME="0_0_6"> Software requirements</A></H3>
 
 <BLOCKQUOTE><B>GNU make</B><BR>
- You must use the GNU version of make for EPICS builds, and we now recommend
- version 4.1 or later (version 3.82 may work on Linux, but doesn't on Windows).
+ You must use GNU make, gnumake, for any EPICS builds. Set your path
+ so that a gnumake version 3.81 or later is available.
 
 <P><B>Perl</B><BR>
  You must have Perl version 5.8.1 or later installed. The EPICS configuration
@@ -90,33 +90,34 @@
  as processes on the host platform.</P>
 
 <P><B>vxWorks</B><BR>
- You must have vxWorks 6 installed if any of your target systems are vxWorks
- systems; the C++ compilers for vxWorks 5.x are now too old to support. The
- vxWorks installation provides the cross-compiler and header files needed to
+ You must have vxWorks 5.5.x or 6.x installed if any of your target systems are
+ vxWorks systems; the C++ compiler for vxWorks 5.4 is now too old to support.
+ The vxWorks installation provides the cross-compiler and header files needed to
  build for these targets. The absolute path to and the version number of the
  vxWorks installation must be set in the
  base/configure/os/CONFIG_SITE.Common.vxWorksCommon file or in one of its
  target-specific overrides.</P>
 
-<P>Consult the <a href="https://epics.anl.gov/base/vxWorks6.php">vxWorks
- 6.x</a> EPICS web pages and the vxWorks documentation for information
+<P>Consult the <a href="https://epics.anl.gov/base/tornado.php">vxWorks
+ 5.x</a> or <a href="https://epics.anl.gov/base/vxWorks6.php">vxWorks
+ 6.x</a> EPICS web pages about and the vxWorks documentation for information
  about configuring your vxWorks operating system for use with EPICS.</P>
 
 <P><B>RTEMS</B><BR>
- For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or 4.10. The
- newer 4.11 or 5.x releases are not supported yet.</P>
-
-<P><B>Command-line editing libraries</B><BR>
-
- GNU readline or other OS-specific libraries can be used by the IOC shell to
- provide command line editing and history recall. The default setting is
- different for each OS. On Linux the default is to use READLINE since most
- distributions include it. On MacOS the default is also READLINE since Apple
- provides a compatible library, although it isn't GNU. On RTEMS we support GNU
- readline and Tecla, although the default is to use neither since these have to
- be added to the RTEMS installation separately. On vxWorks we support the
- built-in ledLib library.</P>
+ For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or later.</P>
 
+<P><B>GNU readline or Tecla library</B><BR>
+ GNU readline and Tecla libraries can be used by the IOC shell to
+ provide command line editing and command line history recall and edit.
+ GNU readline (or Tecla library) must be installed on your target system
+ when COMMANDLINE_LIBRARY is set to READLINE (or TECLA) for that target.
+ EPICS (EPICS shell) is the default specified in CONFIG_COMMON. A
+ READLINE override is defined for linux-x86 in the EPICS distribution.
+ Comment out COMMANDLINE_LIBRARY=READLINE in
+ configure/os/CONFIG_SITE.Common.linux-x86 if readline is not installed
+ on linux-x86. Command-line editing and history will then be those
+ supplied by the os. On vxWorks the ledLib command-line input library is
+ used instead.</P>
 </BLOCKQUOTE>
 
 <H3><A NAME="0_0_7"> Host system storage requirements</A></H3>
@@ -176,12 +177,11 @@
 
 <H4>base/startup directory - contains scripts to set environment and path</H4>
 <PRE>
-        EpicsHostArch       C shell script to set EPICS_HOST_ARCH env variable
-        EpicsHostArch.pl    Perl script to set EPICS_HOST_ARCH env variable
-        Site.profile        bourne shell script to set path and env variables
-        Site.cshrc          c shell script to set path and env variables
-        cygwin.bat          WIN32 bat file to set cygwin path and env variables
-        win32.bat           WIN32 bat file to set path and env variables
+        EpicsHostArch       Shell script to set EPICS_HOST_ARCH env variable
+        unix.csh            C shell script to set path and env variables
+        unix.sh             Bourne shell script to set path and env variables
+        win32.bat           Bat file example to configure win32-x86 target
+        windows.bat         Bat file example to configure windows-x64 target
 </PRE>
 
 <H4>base/configure directory - contains build definitions and rules</H4>
@@ -190,12 +190,12 @@
         CONFIG.CrossCommon    Cross build definitions
         CONFIG.gnuCommon      Gnu compiler build definitions for all archs
         CONFIG_ADDONS         Definitions for &lt;osclass&gt; and DEFAULT options
-        CONFIG_APP_INCLUDE
+        CONFIG_APP_INCLUDE    
         CONFIG_BASE           EPICS base tool and location definitions
         CONFIG_BASE_VERSION   Definitions for EPICS base version number
         CONFIG_COMMON         Definitions common to all builds
         CONFIG_ENV            Definitions of EPICS environment variables
-        CONFIG_FILE_TYPE
+        CONFIG_FILE_TYPE      
         CONFIG_SITE           Site specific make definitions
         CONFIG_SITE_ENV       Site defaults for EPICS environment variables
         MAKEFILE              Installs CONFIG* RULES* creates
@@ -206,9 +206,9 @@
         RULES_ARCHS           Definitions and rules for building architectures
         RULES_BUILD           Build and install rules and definitions
         RULES_DIRS            Definitions and rules for building subdirectories
-        RULES_EXPAND
-        RULES_FILE_TYPE
-        RULES_TARGET
+        RULES_EXPAND          
+        RULES_FILE_TYPE       
+        RULES_TARGET          
         RULES_TOP             Rules specific to a &lt;top&gt; dir (uninstall and tar)
         Sample.Makefile       Sample makefile with comments
 </PRE>
@@ -243,11 +243,11 @@ Files in the base/startup directory have been provided to
  help set required path and other environment variables.
 
 <P><B>EPICS_HOST_ARCH</B><BR>
- Before you can build or use EPICS Base, the environment variable
- EPICS_HOST_ARCH should be defined. A perl script EpicsHostArch.pl in the
+ Before you can build or use EPICS R3.15, the environment variable
+ EPICS_HOST_ARCH must be defined. A perl script EpicsHostArch.pl in the
  base/startup directory has been provided to help set EPICS_HOST_ARCH.
  You should have EPICS_HOST_ARCH set to your host operating system
- followed by a dash and then your CPU architecture, e.g. linux-x86_64.
+ followed by a dash and then your host architecture, e.g. solaris-sparc.
  If you are not using the OS vendor's c/c++ compiler for host builds,
  you will need another dash followed by the alternate compiler name
  (e.g. &quot;-gnu&quot; for GNU c/c++ compilers on a solaris host or &quot;-mingw&quot;
@@ -269,7 +269,7 @@ Files in the base/startup directory have been provided to
 
 <P><B>LD_LIBRARY_PATH</B><BR>
 
- EPICS shared libraries and executables normally contain the full path
+ R3.15 shared libraries and executables normally contain the full path
  to any libraries they require.
  However, if you move the EPICS files or directories from their build-time
  location then in order for the shared libraries to be found at runtime
@@ -340,18 +340,18 @@ Files in the base/startup directory have been provided to
 <H3><A NAME="0_0_13"> Example application and extension</A></H3>
 <BLOCKQUOTE>A perl tool, makeBaseApp.pl is included in the distribution
  file. This script will create a sample application that can be built
- and then executed to try out this release of base.
+ and then executed to try out this release of base. 
 
 <P>
- Instructions for building and executing the example IOC application
+ Instructions for building and executing the 3.15 example application
  can be found in the section &quot;Example Application&quot; of Chapter 2,
  &quot;Getting Started&quot;, in the &quot;IOC Application Developer's Guide&quot; for this
  release. The &quot;Example IOC Application&quot; section briefly explains how to
  create and build an example application in a user created &lt;top&gt;
  directory. It also explains how to run the example application on a
  vxWorks ioc or as a process on the host system.
- By running the example application as a host-based IOC, you will be
- able to quickly implement a complete EPICS system and be able to run channel
+ By running the example application as a host-based IOC, you will be 
+ able to quickly implement a complete EPICS system and be able to run channel 
  access clients on the host system.
 
 <P>

documentation/ReleaseChecklist.html

@@ -33,28 +33,29 @@
 <h1>EPICS Base Release Procedures &amp; Checklist</h1>
 
 <p>This document describes the procedures and provides a checklist of tasks
-that should be performed when creating production releases of EPICS Base.</p>
+that should be performed when creating new releases of EPICS Base.</p>
 
 <h3>The Release Process</h3>
 
 <p>The version released on the Feature Freeze date is designated the first
-pre-release, <tt>-pre1</tt>. The first release candidate <tt>-rc1</tt> is the
-first version that has undergone testing by the developers and has shown no
-problems that must be fixed before release. New versions should be made at about
-2-weekly intervals after the <tt>-pre1</tt> release, and designated as either
-pre-release or release candidate versions by the Release Manager. Release
-candidates are announced to the whole community via the tech-talk mailing list,
-pre-releases are announced to to the developers via the core-talk list. After a
-release candidate has been available for 2 weeks without any new problems being
-reported or major changes having to be committed, the final release can be
-made.</p>
+pre-release, <tt>-pre1</tt>. The first Release Candidate <tt>-rc1</tt> is the
+first version that has undergone widespread testing and which has no known
+problems in it that are slated to be fixed in this release. New versions should
+be made at 2-weekly intervals during the testing and debugging period, and will
+be designated as either pre-release versions or Release Candidates by the
+Release Manager. After a Release Candidate has been available to the whole
+community for testing for at least a week without any additional problems being
+reported or significant changes being committed, the branch can be designated as
+the final release version.</p>
 
 <h3>Roles</h3>
 
-<p>The following roles are used below:</p>
+<p>The following roles are required. The individuals named here have have been
+responsible for these tasks in the past and are expected to continue in the
+relevent roles unless the Release Manager designates otherwise:</p>
 
 <dl>
-  <dt><strong>Release Manager</strong> ()</dt>
+  <dt><strong>Release Manager</strong> (Ralph Lange)</dt>
     <dd>Responsible for managing and tagging the release</dd>
   <dt><strong>Platform Developers</strong> (optional)</dt>
     <dd>Responsible for individual operating system platforms</dd>
@@ -78,7 +79,7 @@ made.</p>
       <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Email all developers about the upcoming release and ask for a list
-        of remaining tasks that must be finished.</td>
+        of remaining jobs that must be finished.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -111,7 +112,7 @@ made.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Review and update this checklist for the upcoming release.</td>
+      <td>Review and update this document for the upcoming release.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -126,31 +127,28 @@ made.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <!-- Submodules... -->
       <td>Edit and commit changes to the EPICS version number file
         configure/CONFIG_BASE_VERSION.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Tag the module in Git using these tag conventions:
+      <td>Tag the module in Git, using these tag conventions:
         <ul>
           <li>
-            <tt>R7.1.1-pre<i>n</i></tt>
+            <tt>R3.15.6-pre1</tt>
             &mdash; pre-release tag
             </li>
           <li>
-            <tt>R7.1.1-rc<i>n</i></tt>
+            <tt>R3.15.6-rc1</tt>
             &mdash; release candidate tag
             </li>
         </ul>
         <blockquote><tt>
-          cd base-7.1<br />
-          git tag -m 'ANJ: Tagged for 7.1.1-rc1' R7.1.1-rc1
+          cd base-3.15<br />
+          git tag -m 'RL: Tagged for 3.15.6-rc1' R3.15.6-rc1
           </tt></blockquote>
-        Note that submodules must <em>not</em> be tagged with the version used
-        for the top-level, they each have their own separate version numbers
-        that are only tagged at the final release.</td>
+        </td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -159,12 +157,12 @@ made.</p>
         script generates a gzipped tarfile directly from the tag, excluding the
         files and directories that are only used for continuous integration:
         <blockquote><tt>
-          cd base-7.1<br />
-          .ci/make-tar.sh R7.1.1-rc1 base-7.1.1-rc1.tar.gz base-7.1.1-rc1/
+          cd base-3.15<br />
+          git archive --prefix=base-3.15.6-rc1/ R3.15.6-rc1 --output=base-3.15.6-rc1.tar.gz
           </tt></blockquote>
         Create a GPG signature file of the tarfile as follows:
         <blockquote><tt>
-          gpg --armor --sign --detach-sig base-7.1.1-rc1.tar.gz
+          gpg --armor --sign --detach-sig base-3.15.6-rc1.tar.gz
           </tt></blockquote>
         </td>
       </tr>
@@ -177,9 +175,8 @@ made.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Website Manager</td>
-      <td>Copy the tarfile and its signature to the Base download area of the
-        website and add the new files to the website Base download index
-        page.</td>
+      <td>If necessary recreate the tarfile following the instructions above.
+        Copy the tar file to the Base download area of the website</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -196,6 +193,11 @@ made.</p>
         versions should use the page and URL for the final release version
         number.</td>
       </tr>
+    <tr>
+      <td>&nbsp;</td>
+      <td>Website Manager</td>
+      <td>Add the new tar file to the website Base download index page.</td>
+      </tr>
     <tr>
       <th colspan="3">Testing</th>
       </tr>
@@ -231,7 +233,7 @@ made.</p>
       <td>&nbsp;</td>
       <td>Application Developers</td>
       <td>Build external applications against this version of Base on all
-        available platforms and test as appropriate. Application code changes
+        available platforms and test as appropriate.  Application code changes
         may be necessary where the EPICS Base APIs have been modified.</td>
       </tr>
     <tr>
@@ -254,8 +256,8 @@ made.</p>
       <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Obtain a positive <q>Ok to release</q> from all platform developers
-        once a release candidate version has gone for 2 weeks without any major
-        new issues being reported.</td>
+        once a Release Candidate version has gone a whole week without any
+        issues being reported.</td>
       </tr>
     <tr>
       <th colspan="3">Creating the final release version</th>
@@ -271,24 +273,23 @@ made.</p>
       <td>Release Manager</td>
       <td>Tag the module in Git:
         <blockquote><tt>
-          cd base-7.1<br />
-          git tag -m 'ANJ: Tagged for 7.1.1' R7.1.1</i>
+          cd base-3.15<br />
+          git tag -m 'RL: Tagged for 3.15.6' R3.15.6
           </tt></blockquote>
         </td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Export the tagged version into a tarfile. The <tt>make-tar.sh</tt>
-        script generates a gzipped tarfile directly from the tag, excluding the
-        files and directories that are only used for continuous integration:
+      <td>Export the tagged version into a tarfile. Note that this command
+        generates a gzipped tarfile directly from the repository:
         <blockquote><tt>
-          cd base-7.1<br />
-          .ci/make-tar.sh R7.1.1 base-7.1.1.tar.gz base-7.1.1/
+          cd base-3.15<br />
+          git archive --prefix=base-3.15.6/ R3.15.6 --output=base-3.15.6.tar.gz
           </tt></blockquote>
         Create a GPG signature file of the tarfile as follows:
         <blockquote><tt>
-          gpg --armor --sign --detach-sig base-7.1.1.tar.gz
+          gpg --armor --sign --detach-sig base-3.15.6.tar.gz
           </tt></blockquote>
         </td>
       </tr>
@@ -301,8 +302,7 @@ made.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Copy the tarfile and its signature to the Base download area of the
-        website.</td>
+      <td>Upload the release tar file to the Launchpad download area.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>

modules/CONFIG_SITE.local

@@ -1,10 +0,0 @@
-#*************************************************************************
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# When building submodules, this should always be true:
-INSTALL_LOCATION = $(EPICS_BASE)
-
-# Stop submodules from installing their configuration files:
-CONFIG_INSTALLS =

modules/Makefile

@@ -1,58 +0,0 @@
-#*************************************************************************
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-TOP = ..
-include $(TOP)/configure/CONFIG
-
-# Submodules for bundle build
-SUBMODULES += libcom
-
-SUBMODULES += ca
-ca_DEPEND_DIRS = libcom
-
-SUBMODULES += database
-database_DEPEND_DIRS = ca
-
-SUBMODULES += pvData
-pvData_DEPEND_DIRS = libcom
-
-SUBMODULES += pvAccess
-pvAccess_DEPEND_DIRS = pvData database
-
-SUBMODULES += normativeTypes
-normativeTypes_DEPEND_DIRS = pvData
-
-SUBMODULES += pvaClient
-pvaClient_DEPEND_DIRS = pvAccess normativeTypes
-
-SUBMODULES += pvDatabase
-pvDatabase_DEPEND_DIRS = pvAccess
-
-SUBMODULES += pva2pva
-pva2pva_DEPEND_DIRS = pvAccess
-
-SUBMODULES += example
-example_DEPEND_DIRS = pva2pva pvaClient
-
-# Allow sites to add extra submodules
--include Makefile.local
-
-# Add only checked-out submodules to DIRS
-DIRS += $(subst /Makefile,,$(wildcard $(addsuffix /Makefile, $(SUBMODULES))))
-
-include $(TOP)/configure/RULES_DIRS
-
-INSTALL_LOCATION_ABS := $(abspath $(INSTALL_LOCATION))
-RELEASE_LOCAL := RELEASE.$(EPICS_HOST_ARCH).local
-
-# Ensure that RELEASE.<host>.local exists before doing anything else
-all host $(DIRS) $(ARCHS) $(ACTIONS) $(dirActionTargets) $(dirArchTargets) \
-    $(dirActionArchTargets) $(actionArchTargets): | $(RELEASE_LOCAL)
-
-$(RELEASE_LOCAL):
-	$(ECHO) Creating $@, EPICS_BASE = $(INSTALL_LOCATION_ABS)
-	@echo EPICS_BASE = $(INSTALL_LOCATION_ABS)> $@
-realclean:
-	$(RM) $(RELEASE_LOCAL)

modules/ca/.ci/travis-build.sh

@@ -1,21 +0,0 @@
-#!/bin/sh
-set -e -x
-
-# set RTEMS to eg. "4.9" or "4.10"
-# requires qemu, bison, flex, texinfo, install-info
-if [ -n "$RTEMS" ]
-then
-  # find local qemu-system-i386
-  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
-  echo -n "Using QEMU: "
-  type qemu-system-i386 || echo "Missing qemu"
-  EXTRA=RTEMS_QEMU_FIXUPS=YES
-fi
-
-make -j2 $EXTRA
-
-if [ "$TEST" != "NO" ]
-then
-  make -j2 tapfiles
-  make -s test-results
-fi

modules/ca/.ci/travis-prepare.sh

@@ -1,132 +0,0 @@
-#!/bin/sh
-set -e -x
-
-CURDIR="$PWD"
-
-QDIR="$HOME/.cache/qemu"
-
-if [ -n "$RTEMS" -a "$TEST" = "YES" ]
-then
-  git clone --quiet --branch vme --depth 10 https://github.com/mdavidsaver/qemu.git "$HOME/.build/qemu"
-  cd "$HOME/.build/qemu"
-
-  HEAD=`git log -n1 --pretty=format:%H`
-  echo "HEAD revision $HEAD"
-
-  [ -e "$HOME/.cache/qemu/built" ] && BUILT=`cat "$HOME/.cache/qemu/built"`
-  echo "Cached revision $BUILT"
-
-  if [ "$HEAD" != "$BUILT" ]
-  then
-    echo "Building QEMU"
-    git submodule --quiet update --init
-
-    install -d "$HOME/.build/qemu/build"
-    cd         "$HOME/.build/qemu/build"
-
-    "$HOME/.build/qemu/configure" --prefix="$HOME/.cache/qemu/usr" --target-list=i386-softmmu --disable-werror
-    make -j2
-    make install
-
-    echo "$HEAD" > "$HOME/.cache/qemu/built"
-  fi
-fi
-
-cd "$CURDIR"
-
-cat << EOF > configure/RELEASE.local
-EPICS_BASE=$HOME/.source/epics-base
-EOF
-
-install -d "$HOME/.source"
-cd "$HOME/.source"
-
-add_base_module() {
-  MODULE=$1
-  BRANCH=$2
-  ( cd epics-base/modules && \
-  git clone --quiet --depth 5 --branch "$MODULE"/"$BRANCH" https://github.com/${REPOBASE:-epics-base}/epics-base.git "$MODULE" && \
-  cd "$MODULE" && git log -n1 )
-}
-
-git clone --quiet --depth 5 --branch core/"${BRCORE:-master}" https://github.com/${REPOBASE:-epics-base}/epics-base.git epics-base
-( cd epics-base && git log -n1 )
-add_base_module libcom "${BRLIBCOM:-master}"
-
-EPICS_HOST_ARCH=`sh epics-base/startup/EpicsHostArch`
-
-# requires wine and g++-mingw-w64-i686
-if [ "$WINE" = "32" ]
-then
-  echo "Cross mingw32"
-  sed -i -e '/CMPLR_PREFIX/d' epics-base/configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw
-  cat << EOF >> epics-base/configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw
-CMPLR_PREFIX=i686-w64-mingw32-
-EOF
-  cat << EOF >> epics-base/configure/CONFIG_SITE
-CROSS_COMPILER_TARGET_ARCHS+=win32-x86-mingw
-EOF
-fi
-
-if [ "$STATIC" = "YES" ]
-then
-  echo "Build static libraries/executables"
-  cat << EOF >> epics-base/configure/CONFIG_SITE
-SHARED_LIBRARIES=NO
-STATIC_BUILD=YES
-EOF
-fi
-
-case "$CMPLR" in
-clang)
-  echo "Host compiler is clang"
-  cat << EOF >> epics-base/configure/os/CONFIG_SITE.Common.$EPICS_HOST_ARCH
-GNU         = NO
-CMPLR_CLASS = clang
-CC          = clang
-CCC         = clang++
-EOF
-
-  # hack
-  sed -i -e 's/CMPLR_CLASS = gcc/CMPLR_CLASS = clang/' epics-base/configure/CONFIG.gnuCommon
-
-  clang --version
-  ;;
-*)
-  echo "Host compiler is default"
-  gcc --version
-  ;;
-esac
-
-cat <<EOF >> epics-base/configure/CONFIG_SITE
-USR_CPPFLAGS += $USR_CPPFLAGS
-USR_CFLAGS += $USR_CFLAGS
-USR_CXXFLAGS += $USR_CXXFLAGS
-EOF
-
-# set RTEMS to eg. "4.9" or "4.10"
-# requires qemu, bison, flex, texinfo, install-info
-if [ -n "$RTEMS" ]
-then
-  echo "Cross RTEMS${RTEMS} for pc386"
-  install -d /home/travis/.cache
-  curl -L "https://github.com/mdavidsaver/rsb/releases/download/travis-20160306-2/rtems${RTEMS}-i386-trusty-20190306-2.tar.gz" \
-  | tar -C /home/travis/.cache -xj
-
-  sed -i -e '/^RTEMS_VERSION/d' -e '/^RTEMS_BASE/d' epics-base/configure/os/CONFIG_SITE.Common.RTEMS
-  cat << EOF >> epics-base/configure/os/CONFIG_SITE.Common.RTEMS
-RTEMS_VERSION=$RTEMS
-RTEMS_BASE=/home/travis/.cache/rtems${RTEMS}-i386
-EOF
-  cat << EOF >> epics-base/configure/CONFIG_SITE
-CROSS_COMPILER_TARGET_ARCHS+=RTEMS-pc386
-EOF
-
-  # find local qemu-system-i386
-  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
-  echo -n "Using QEMU: "
-  type qemu-system-i386 || echo "Missing qemu"
-  EXTRA=RTEMS_QEMU_FIXUPS=YES
-fi
-
-make -j2 -C epics-base $EXTRA

modules/ca/.travis.yml

@@ -1,26 +0,0 @@
-sudo: false
-dist: trusty
-language: c
-compiler:
-  - gcc
-addons:
-  apt:
-    packages:
-    - libreadline6-dev
-    - libncurses5-dev
-    - perl
-    - clang
-    - g++-mingw-w64-i686
-install:
- - ./.ci/travis-prepare.sh
-script:
- - ./.ci/travis-build.sh
-env:
- - BRCORE=master BRLIBCOM=master TEST=NO
- - CMPLR=clang TEST=NO
- - USR_CXXFLAGS=-std=c++11 TEST=NO
- - CMPLR=clang USR_CXXFLAGS=-std=c++11 TEST=NO
- - WINE=32 TEST=NO STATIC=YES
- - WINE=32 TEST=NO STATIC=NO
- - RTEMS=4.10 TEST=NO
- - RTEMS=4.9 TEST=NO

modules/ca/configure/CONFIG

@@ -1,28 +0,0 @@
-# CONFIG - Load build configuration data
-#
-# Do not make changes to this file!
-
-# Allow user to override where the build rules come from
-RULES = $(EPICS_BASE)
-
-# RELEASE files point to other application tops
-include $(TOP)/configure/RELEASE
--include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).Common
-ifdef T_A
--include $(TOP)/configure/RELEASE.Common.$(T_A)
--include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
-endif
-
-CONFIG = $(RULES)/configure
-include $(CONFIG)/CONFIG
-
-# Override the Base definition:
-INSTALL_LOCATION = $(TOP)
-
-# CONFIG_SITE files contain other build configuration settings
-include $(TOP)/configure/CONFIG_SITE
--include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
-ifdef T_A
- -include $(TOP)/configure/CONFIG_SITE.Common.$(T_A)
- -include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
-endif

modules/ca/configure/CONFIG_CA_MODULE

@@ -1,9 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2017 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# Libraries needed to link a host tool
-EPICS_BASE_HOST_LIBS = ca Com

modules/ca/configure/CONFIG_CA_VERSION

@@ -1,4 +0,0 @@
-EPICS_CA_MAJOR_VERSION = 4
-EPICS_CA_MINOR_VERSION = 13
-EPICS_CA_MAINTENANCE_VERSION = 2
-EPICS_CA_DEVELOPMENT_FLAG = 1

modules/ca/configure/CONFIG_SITE

@@ -1,42 +0,0 @@
-# CONFIG_SITE
-
-# Make any application-specific changes to the EPICS build
-#   configuration variables in this file.
-#
-# Host/target specific settings can be specified in files named
-#   CONFIG_SITE.$(EPICS_HOST_ARCH).Common
-#   CONFIG_SITE.Common.$(T_A)
-#   CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
-
-# CHECK_RELEASE controls the consistency checking of the support
-#   applications pointed to by the RELEASE* files.
-# Normally CHECK_RELEASE should be set to YES.
-# Set CHECK_RELEASE to NO to disable checking completely.
-# Set CHECK_RELEASE to WARN to perform consistency checking but
-#   continue building even if conflicts are found.
-CHECK_RELEASE = YES
-
-# Set this when you only want to compile this application
-#   for a subset of the cross-compiled target architectures
-#   that Base is built for.
-#CROSS_COMPILER_TARGET_ARCHS = vxWorks-ppc32
-
-# To install files into a location other than $(TOP) define
-#   INSTALL_LOCATION here.
-#INSTALL_LOCATION=</absolute/path/to/install/top>
-
-# Set this when the IOC and build host use different paths
-#   to the install location. This may be needed to boot from
-#   a Microsoft FTP server say, or on some NFS configurations.
-#IOCS_APPL_TOP = </IOC's/absolute/path/to/install/top>
-
-# For application debugging purposes, override the HOST_OPT and/
-#   or CROSS_OPT settings from base/configure/CONFIG_SITE
-#HOST_OPT = NO
-#CROSS_OPT = NO
-
-# These allow developers to override the CONFIG_SITE variable
-# settings without having to modify the configure/CONFIG_SITE
-# file itself.
--include $(TOP)/../CONFIG_SITE.local
--include $(TOP)/configure/CONFIG_SITE.local

modules/ca/configure/Makefile

@@ -1,15 +0,0 @@
-#*************************************************************************
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-TOP = ..
-
-include $(TOP)/configure/CONFIG
-
-TARGETS = $(CONFIG_TARGETS)
-CONFIGS += $(subst ../,,$(wildcard $(CONFIG_INSTALLS)))
-
-CFG += CONFIG_CA_MODULE
-CFG += CONFIG_CA_VERSION
-
-include $(TOP)/configure/RULES

modules/ca/configure/RELEASE

@@ -1,39 +0,0 @@
-# RELEASE - Location of external support modules
-#
-# IF YOU CHANGE ANY PATHS in this file or make API changes to
-# any modules it refers to, you should do a "make rebuild" in
-# this application's top level directory.
-#
-# The EPICS build process does not check dependencies against
-# any files from outside the application, so it is safest to
-# rebuild it completely if any modules it depends on change.
-#
-# Host- or target-specific settings can be given in files named
-#  RELEASE.$(EPICS_HOST_ARCH).Common
-#  RELEASE.Common.$(T_A)
-#  RELEASE.$(EPICS_HOST_ARCH).$(T_A)
-#
-# This file is parsed by both GNUmake and an EPICS Perl script,
-# so it may ONLY contain definititions of paths to other support
-# modules, variable definitions that are used in module paths,
-# and include statements that pull in other RELEASE files.
-# Variables may be used before their values have been set.
-# Build variables that are NOT used in paths should be set in
-# the CONFIG_SITE file.
-
-# Variables and paths to dependent modules:
-#MODULES = /path/to/modules
-#MYMODULE = $(MODULES)/my-module
-
-# If building the EPICS modules individually, set these:
-#EPICS_LIBCOM = $(MODULES)/libcom-3.17.0
-#EPICS_BASE = $(MODULES)/core-7.0.1
-
-# Set RULES here if you want to use build rules from elsewhere:
-#RULES = $(MODULES)/build-rules
-
-# These lines allow developers to override these RELEASE settings
-# without having to modify this file directly.
--include $(TOP)/../RELEASE.local
--include $(TOP)/../RELEASE.$(EPICS_HOST_ARCH).local
--include $(TOP)/configure/RELEASE.local

modules/ca/configure/RULES

@@ -1,6 +0,0 @@
-# RULES
-
-include $(CONFIG)/RULES
-
-# Library should be rebuilt because LIBOBJS may have changed.
-$(LIBNAME): ../Makefile