Merge pull request #192 from crazy-max/support-ghes

enforce baseUrl to api.github.com if action used on GHES
update generated content
2025-06-26 04:31:09 +02:00 · 2023-01-28 03:02:07 +01:00 · 2023-01-28 02:47:03 +01:00 · 2023-01-28 02:45:17 +01:00 · 2023-01-28 02:44:08 +01:00 · 2023-01-28 02:08:06 +01:00
34 changed files with 1834 additions and 432 deletions
--- a/.github/buildkit-container-logs.png
+++ b/.github/buildkit-container-logs.png
--- a/.github/workflows/ci.yml
+++ b/.github/workflows/ci.yml
@ -30,9 +30,16 @@ jobs:
        uses: actions/checkout@v3
      -
        name: Set up Docker Buildx
+        id: buildx
        uses: ./
        with:
          version: ${{ matrix.buildx-version }}
+      -
+        name: Nodes output
+        run: |
+          cat << EOF
+          ${{ steps.buildx.outputs.nodes }}
+          EOF

  multi:
    runs-on: ubuntu-latest
@ -90,7 +97,7 @@ jobs:
          EOL
      -
        name: Set up QEMU
-        uses: docker/setup-qemu-action@v1
+        uses: docker/setup-qemu-action@v2
      -
        name: Set up Docker Buildx
        uses: ./
@ -98,7 +105,7 @@ jobs:
          buildkitd-flags: --debug
      -
        name: Build
-        uses: docker/build-push-action@v2
+        uses: docker/build-push-action@v3
        with:
          context: .
          platforms: linux/amd64,linux/arm64,linux/ppc64le
@ -244,7 +251,7 @@ jobs:
          config: /tmp/buildkitd.toml
      -
        name: Build
-        uses: docker/build-push-action@v2
+        uses: docker/build-push-action@v3
        with:
          context: .

@ -271,7 +278,7 @@ jobs:
              mirrors = ["mirror.gcr.io"]
      -
        name: Build
-        uses: docker/build-push-action@v2
+        uses: docker/build-push-action@v3
        with:
          context: .

@ -293,14 +300,18 @@ jobs:
        uses: actions/checkout@v3
      -
        name: Set up QEMU
-        uses: docker/setup-qemu-action@v1
+        uses: docker/setup-qemu-action@v2
        with:
          platforms: ${{ matrix.qemu-platforms }}
      -
        name: Set up Docker Buildx
+        id: buildx
        uses: ./
        with:
          version: ${{ matrix.buildx-version }}
+      -
+        name: List builder platforms
+        run: echo ${{ steps.buildx.outputs.platforms }}

  build-ref:
    runs-on: ubuntu-latest
@ -409,3 +420,47 @@ jobs:
            echo "::error::Should have failed"
            exit 1
          fi
+
+  append:
+    runs-on: ubuntu-latest
+    steps:
+      -
+        name: Checkout
+        uses: actions/checkout@v3
+      -
+        name: Create dummy contexts
+        run: |
+          docker context create ctxbuilder2
+          docker context create ctxbuilder3
+      -
+        name: Set up Docker Buildx
+        id: buildx
+        uses: ./
+        with:
+          append: |
+            - name: builder2
+              endpoint: ctxbuilder2
+              platforms: linux/amd64
+              driver-opts:
+                - image=moby/buildkit:master
+                - network=host
+            - endpoint: ctxbuilder3
+              platforms: linux/arm64
+      -
+        name: List builder platforms
+        run: echo ${{ steps.buildx.outputs.platforms }}
+
+  platforms:
+    runs-on: ubuntu-latest
+    steps:
+      -
+        name: Checkout
+        uses: actions/checkout@v3
+      -
+        name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+      -
+        name: Set up Docker Buildx
+        uses: ./
+        with:
+          platforms: linux/amd64
--- a/.github/workflows/test.yml
+++ b/.github/workflows/test.yml
@ -19,7 +19,7 @@ jobs:
        uses: actions/checkout@v3
      -
        name: Validate
-        uses: docker/bake-action@v1
+        uses: docker/bake-action@v2
        with:
          targets: validate
      -
@ -27,9 +27,11 @@ jobs:
        uses: ./
      -
        name: Test
-        uses: docker/bake-action@v1
+        uses: docker/bake-action@v2
        with:
          targets: test
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
      -
        name: Upload coverage
        uses: codecov/codecov-action@v3
--- a/README.md
+++ b/README.md
@ -1,42 +1,38 @@
 [![GitHub release](https://img.shields.io/github/release/docker/setup-buildx-action.svg?style=flat-square)](https://github.com/docker/setup-buildx-action/releases/latest)
 [![GitHub marketplace](https://img.shields.io/badge/marketplace-docker--setup--buildx-blue?logo=github&style=flat-square)](https://github.com/marketplace/actions/docker-setup-buildx)
-[![CI workflow](https://img.shields.io/github/workflow/status/docker/setup-buildx-action/ci?label=ci&logo=github&style=flat-square)](https://github.com/docker/setup-buildx-action/actions?workflow=ci)
-[![Test workflow](https://img.shields.io/github/workflow/status/docker/setup-buildx-action/test?label=test&logo=github&style=flat-square)](https://github.com/docker/setup-buildx-action/actions?workflow=test)
+[![CI workflow](https://img.shields.io/github/actions/workflow/status/docker/setup-buildx-action/ci.yml?branch=master&label=ci&logo=github&style=flat-square)](https://github.com/docker/setup-buildx-action/actions?workflow=ci)
+[![Test workflow](https://img.shields.io/github/actions/workflow/status/docker/setup-buildx-action/test.yml?branch=master&label=test&logo=github&style=flat-square)](https://github.com/docker/setup-buildx-action/actions?workflow=test)
 [![Codecov](https://img.shields.io/codecov/c/github/docker/setup-buildx-action?logo=codecov&style=flat-square)](https://codecov.io/gh/docker/setup-buildx-action)

 ## About

 GitHub Action to set up Docker [Buildx](https://github.com/docker/buildx).

-This action will create and boot a builder that can be used in the following steps of your workflow if you're using
-[buildx](https://github.com/docker/buildx). By default, the `docker-container` [builder driver](https://github.com/docker/buildx/blob/master/docs/reference/buildx_create.md#driver)
-will be used to be able to build multi-platform images and export cache thanks to the [BuildKit](https://github.com/moby/buildkit)
-container.
+This action will create and boot a builder that can be used in the following
+steps of your workflow if you're using Buildx or the [`build-push` action](https://github.com/docker/build-push-action/).
+By default, the [`docker-container` driver](https://docs.docker.com/build/building/drivers/docker-container/)
+will be used to be able to build multi-platform images and export cache using
+a [BuildKit](https://github.com/moby/buildkit) container.

 ![Screenshot](.github/setup-buildx-action.png)

 ___

 * [Usage](#usage)
-  * [Quick start](#quick-start)
-  * [With QEMU](#with-qemu)
-  * [Install by default](#install-by-default)
-  * [BuildKit daemon configuration](#buildkit-daemon-configuration)
-    * [Registry mirror](#registry-mirror)
-    * [Max parallelism](#max-parallelism)
-  * [Standalone mode](#standalone-mode)
+* [Configuring your builder](#configuring-your-builder)
+* [Version pinning](#version-pinning)
 * [Customizing](#customizing)
  * [inputs](#inputs)
  * [outputs](#outputs)
  * [environment variables](#environment-variables)
 * [Notes](#notes)
+  * [`nodes` output](#nodes-output)
  * [BuildKit container logs](#buildkit-container-logs)
-* [Keep up-to-date with GitHub Dependabot](#keep-up-to-date-with-github-dependabot)
+* [Using on GHES](#using-on-ghes)
+* [Contributing](#contributing)

 ## Usage

-### Quick start
-
 ```yaml
 name: ci

@ -49,247 +45,166 @@ jobs:
    steps:
      -
        name: Checkout
-        uses: actions/checkout@v2
-      -
-        name: Set up Docker Buildx
-        id: buildx
-        uses: docker/setup-buildx-action@v1
-      -
-        name: Inspect builder
-        run: |
-          echo "Name:      ${{ steps.buildx.outputs.name }}"
-          echo "Endpoint:  ${{ steps.buildx.outputs.endpoint }}"
-          echo "Status:    ${{ steps.buildx.outputs.status }}"
-          echo "Flags:     ${{ steps.buildx.outputs.flags }}"
-          echo "Platforms: ${{ steps.buildx.outputs.platforms }}"
-```
-
-### With QEMU
-
-If you want support for more platforms you can use our [setup-qemu](https://github.com/docker/setup-qemu-action) action:
-
-```yaml
-name: ci
-
-on:
-  push:
-
-jobs:
-  buildx:
-    runs-on: ubuntu-latest
-    steps:
-      -
-        name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v3
      -
+        # Add support for more platforms with QEMU (optional)
+        # https://github.com/docker/setup-qemu-action
        name: Set up QEMU
-        uses: docker/setup-qemu-action@v1
+        uses: docker/setup-qemu-action@v2
      -
        name: Set up Docker Buildx
-        id: buildx
-        uses: docker/setup-buildx-action@v1
-      -
-        name: Available platforms
-        run: echo ${{ steps.buildx.outputs.platforms }}
+        uses: docker/setup-buildx-action@v2
 ```

-### Install by default
+## Configuring your builder
+
+See https://docs.docker.com/build/ci/github-actions/configure-builder/
+
+## Version pinning
+
+This action builds images using [Buildx](https://github.com/docker/buildx) and
+[BuildKit](https://github.com/moby/buildkit). By default, the action will
+attempt to use the latest version of Buildx available on the GitHub Runner
+(the build client) and the latest release of BuildKit (the build server).
+
+To pin to a specific version of Buildx, use the `version` input. For example,
+to pin to Buildx v0.10.0:

 ```yaml
-name: ci
-
-on:
-  push:
-
-jobs:
-  buildx:
-    runs-on: ubuntu-latest
-    steps:
-      -
-        name: Checkout
-        uses: actions/checkout@v2
-      -
-        uses: docker/setup-buildx-action@v1
-        id: buildx
-        with:
-          install: true
-      -
-        name: Build
-        run: |
-          docker build . # will run buildx
+- name: Set up Docker Buildx
+  uses: docker/setup-buildx-action@v3
+  with:
+    version: v0.10.0
 ```

-### BuildKit daemon configuration
-
-You can provide a [BuildKit configuration](https://github.com/moby/buildkit/blob/master/docs/buildkitd.toml.md)
-to your builder if you're using the [`docker-container` driver](https://github.com/docker/buildx/blob/master/docs/reference/buildx_create.md#driver)
-(default) with the `config` or `config-inline` inputs:
-
-#### Registry mirror
-
-You can configure a registry mirror using an inline block directly in your
-workflow with the `config-inline` input:
+To pin to a specific version of BuildKit, use the `image` option in the
+`driver-opts` input. For example, to pin to BuildKit v0.11.0:

 ```yaml
-name: ci
-
-on:
-  push:
-
-jobs:
-  buildx:
-    runs-on: ubuntu-latest
-    steps:
-      -
-        name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v1
-        with:
-          config-inline: |
-            [registry."docker.io"]
-              mirrors = ["mirror.gcr.io"]
-```
-
-#### Max parallelism
-
-You can limit the parallelism of the BuildKit solver which is particularly
-useful for low-powered machines.
-
-You can use the `config-inline` input like the
-previous example, or you can use a dedicated BuildKit config file from your
-repo if you want with the `config` input:
-
-```toml
-# .github/buildkitd.toml
-[worker.oci]
-  max-parallelism = 4
-```
-
-```yaml
-name: ci
-
-on:
-  push:
-
-jobs:
-  buildx:
-    runs-on: ubuntu-latest
-    steps:
-      -
-        name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v1
-        with:
-          config: .github/buildkitd.toml
-```
-
-### Standalone mode
-
-If you don't have the Docker CLI installed on the GitHub Runner, buildx binary
-is invoked directly, instead of calling it as a docker plugin. This can be
-useful if you want to use the `kubernetes` driver in your self-hosted runner:
-
-```yaml
-name: ci
-
-on:
-  push:
-
-jobs:
-  buildx:
-    runs-on: ubuntu-latest
-    steps:
-      -
-        name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v1
-        with:
-          driver: kubernetes
-      -
-        name: Build
-        run: |
-          buildx build .
+- name: Set up Docker Buildx
+  uses: docker/setup-buildx-action@v3
+  with:
+    driver-opts: image=moby/buildkit:v0.11.0
 ```

 ## Customizing

 ### inputs

-Following inputs can be used as `step.with` keys
+Following inputs can be used as `step.with` keys:

-| Name               | Type    | Description                       |
-|--------------------|---------|-----------------------------------|
-| `version`          | String  | [buildx](https://github.com/docker/buildx) version. (eg. `v0.3.0`, `latest`, `https://github.com/docker/buildx.git#master`) |
-| `driver`           | String  | Sets the [builder driver](https://github.com/docker/buildx/blob/master/docs/reference/buildx_create.md#driver) to be used (default `docker-container`) |
-| `driver-opts`      | CSV     | List of additional [driver-specific options](https://github.com/docker/buildx/blob/master/docs/reference/buildx_create.md#driver-opt) (eg. `image=moby/buildkit:master`) |
-| `buildkitd-flags`  | String  | [Flags for buildkitd](https://github.com/moby/buildkit/blob/master/docs/buildkitd.toml.md) daemon (since [buildx v0.3.0](https://github.com/docker/buildx/releases/tag/v0.3.0)) |
-| `install`          | Bool    | Sets up `docker build` command as an alias to `docker buildx` (default `false`) |
-| `use`              | Bool    | Switch to this builder instance (default `true`) |
-| `endpoint`         | String  | [Optional address for docker socket](https://github.com/docker/buildx/blob/master/docs/reference/buildx_create.md#description) or context from `docker context ls` |
-| `config`¹          | String  | [BuildKit config file](https://github.com/docker/buildx/blob/master/docs/reference/buildx_create.md#config) |
-| `config-inline`¹   | String  | Same as `config` but inline |
-
-> * ¹ `config` and `config-inline` are mutually exclusive
-
-> `CSV` type must be a newline-delimited string
-> ```yaml
-> driver-opts: image=moby/buildkit:master
-> ```
+> `List` type is a newline-delimited string
 > ```yaml
 > driver-opts: |
 >   image=moby/buildkit:master
 >   network=host
 > ```

+> `CSV` type must be a newline-delimited string
+> ```yaml
+> platforms: linux/amd64,linux/arm64
+> ```
+
+| Name              | Type     | Description                                                                                                                                                                                     |
+|-------------------|----------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+| `version`         | String   | [Buildx](https://github.com/docker/buildx) version. (eg. `v0.3.0`, `latest`, `https://github.com/docker/buildx.git#master`)                                                                     |
+| `driver`          | String   | Sets the [builder driver](https://docs.docker.com/engine/reference/commandline/buildx_create/#driver) to be used (default `docker-container`)                                                   |
+| `driver-opts`     | List     | List of additional [driver-specific options](https://docs.docker.com/engine/reference/commandline/buildx_create/#driver-opt) (eg. `image=moby/buildkit:master`)                                 |
+| `buildkitd-flags` | String   | [Flags for buildkitd](https://docs.docker.com/engine/reference/commandline/buildx_create/#buildkitd-flags) daemon (since [buildx v0.3.0](https://github.com/docker/buildx/releases/tag/v0.3.0)) |
+| `install`         | Bool     | Sets up `docker build` command as an alias to `docker buildx` (default `false`)                                                                                                                 |
+| `use`             | Bool     | Switch to this builder instance (default `true`)                                                                                                                                                |
+| `endpoint`        | String   | [Optional address for docker socket](https://docs.docker.com/engine/reference/commandline/buildx_create/#description) or context from `docker context ls`                                       |
+| `platforms`       | List/CSV | Fixed [platforms](https://docs.docker.com/engine/reference/commandline/buildx_create/#platform) for current node. If not empty, values take priority over the detected ones.                    |
+| `config`¹         | String   | [BuildKit config file](https://docs.docker.com/engine/reference/commandline/buildx_create/#config)                                                                                              |
+| `config-inline`¹  | String   | Same as `config` but inline                                                                                                                                                                     |
+| `append`          | YAML     | [Append additional nodes](docs/advanced/append-nodes.md) to the builder                                                                                                                         |
+
+> * ¹ `config` and `config-inline` are mutually exclusive
+
 ### outputs

 Following outputs are available

-| Name          | Type    | Description                           |
-|---------------|---------|---------------------------------------|
-| `name`        | String  | Builder name |
-| `driver`      | String  | Builder driver |
-| `endpoint`    | String  | Builder node endpoint |
-| `status`      | String  | Builder node status |
-| `flags`       | String  | Builder node flags (if applicable) |
-| `platforms`   | String  | Builder node platforms available (comma separated) |
+| Name        | Type   | Description                                     |
+|-------------|--------|-------------------------------------------------|
+| `name`      | String | Builder name                                    |
+| `driver`    | String | Builder driver                                  |
+| `platforms` | String | Builder node platforms (preferred or available) |
+| `nodes`     | JSON   | Builder [nodes metadata](#nodes-output)         |

 ### environment variables

 The following [official docker environment variables](https://docs.docker.com/engine/reference/commandline/cli/#environment-variables) are supported:

-| Name            | Type    | Default      | Description                                    |
-|-----------------|---------|-------------|-------------------------------------------------|
-| `DOCKER_CONFIG` | String  | `~/.docker` | The location of your client configuration files |
+| Name            | Type   | Default     | Description                                     |
+|-----------------|--------|-------------|-------------------------------------------------|
+| `DOCKER_CONFIG` | String | `~/.docker` | The location of your client configuration files |

 ## Notes

+### `nodes` output
+
+```json
+[
+  {
+     "name": "builder-3820d274-502c-4498-ae24-d4c32b3023d90",
+     "endpoint": "unix:///var/run/docker.sock",
+     "driver-opts": [
+       "network=host",
+       "image=moby/buildkit:master"
+     ],
+    "status": "running",
+    "buildkitd-flags": "--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host",
+    "buildkit": "3fab389",
+    "platforms": "linux/amd64,linux/amd64/v2,linux/amd64/v3,linux/amd64/v4,linux/386"
+  }
+]
+```
+
+| Name              | Type   | Description                |
+|-------------------|--------|----------------------------|
+| `name`            | String | Node name                  |
+| `endpoint`        | String | Node endpoint              |
+| `driver-opts`     | List   | Options for the driver     |
+| `status`          | String | Node status                |
+| `buildkitd-flags` | String | Flags for buildkitd daemon |
+| `buildkit`        | String | BuildKit version           |
+| `platforms`       | String | Platforms available        |
+
 ### BuildKit container logs

-To display BuildKit container logs (when `docker-container` driver is used) you have to [enable step debug logging](https://docs.github.com/en/actions/managing-workflow-runs/enabling-debug-logging#enabling-step-debug-logging)
-or you can also enable debugging in the [setup-buildx action step](https://github.com/docker/setup-buildx-action):
+See https://docs.docker.com/build/ci/github-actions/configure-builder/#buildkit-container-logs

-```yaml
-  -
-    name: Set up Docker Buildx
-    uses: docker/setup-buildx-action@v1
-    with:
-      buildkitd-flags: --debug
+## Using on GHES
+
+GitHub Runners come [pre-installed with Docker Buildx](https://github.com/actions/runner-images/blob/main/images/linux/Ubuntu2204-Readme.md)
+following your virtual environment. If you specify a version or `latest` of
+Docker Buildx in your workflow, the version will be downloaded from [GitHub Releases in `docker/buildx`](https://github.com/docker/buildx/releases)
+repository. These calls to `docker/buildx` are made via unauthenticated requests,
+which are limited to [60 requests per hour per IP](https://docs.github.com/en/rest/overview/resources-in-the-rest-api#rate-limiting).
+
+If more requests are made within the time frame, then you will start to see
+rate-limit errors during downloading that looks like:
+
+```
+##[error]API rate limit exceeded for...
 ```

-Logs will be available at the end of a job:
-
-![BuildKit container logs](.github/buildkit-container-logs.png)
-
-## Keep up-to-date with GitHub Dependabot
-
-Since [Dependabot](https://docs.github.com/en/github/administering-a-repository/keeping-your-actions-up-to-date-with-github-dependabot)
-has [native GitHub Actions support](https://docs.github.com/en/github/administering-a-repository/configuration-options-for-dependency-updates#package-ecosystem),
-to enable it on your GitHub repo all you need to do is add the `.github/dependabot.yml` file:
+To get a higher rate limit, you can [generate a personal access token on github.com](https://github.com/settings/tokens/new)
+and pass it as the `github_token` input for the action:

 ```yaml
-version: 2
-updates:
-  # Maintain dependencies for GitHub Actions
-  - package-ecosystem: "github-actions"
-    directory: "/"
-    schedule:
-      interval: "daily"
+uses: docker/setup-buildx-action@v3
+with:
+  github_token: ${{ secrets.GH_DOTCOM_TOKEN }}
+  version: v0.10.1
 ```
+
+If the runner is not able to access `github.com`, it will take the default one
+available on the GitHub Runner or runner's tool cache. See "[Setting up the tool cache on self-hosted runners without internet access](https://docs.github.com/en/enterprise-server@3.2/admin/github-actions/managing-access-to-actions-from-githubcom/setting-up-the-tool-cache-on-self-hosted-runners-without-internet-access)"
+for more information.
+
+## Contributing
+
+Want to contribute? Awesome! You can find information about contributing to
+this project in the [CONTRIBUTING.md](/.github/CONTRIBUTING.md)
--- a/tests/auth.test.ts
+++ b/tests/auth.test.ts
@ -0,0 +1,88 @@
+import {describe, expect, test, beforeEach} from '@jest/globals';
+import * as fs from 'fs';
+import * as os from 'os';
+import * as path from 'path';
+import * as auth from '../src/auth';
+
+const tmpdir = fs.mkdtempSync(path.join(os.tmpdir(), 'docker-setup-buildx-jest')).split(path.sep).join(path.posix.sep);
+const dockerConfigHome = path.join(tmpdir, '.docker');
+const credsdir = path.join(dockerConfigHome, 'buildx', 'creds');
+
+describe('setCredentials', () => {
+  beforeEach(() => {
+    process.env = Object.keys(process.env).reduce((object, key) => {
+      if (!key.startsWith(auth.envPrefix)) {
+        object[key] = process.env[key];
+      }
+      return object;
+    }, {});
+  });
+
+  // prettier-ignore
+  test.each([
+    [
+      'mycontext',
+      'docker-container',
+      {},
+      [],
+      []
+    ],
+    [
+      'docker-container://mycontainer',
+      'docker-container',
+      {},
+      [],
+      []
+    ],
+    [
+      'tcp://graviton2:1234',
+      'remote',
+      {},
+      [],
+      []
+    ],
+    [
+      'tcp://graviton2:1234',
+      'remote',
+      {
+        'BUILDER_NODE_0_AUTH_TLS_CACERT': 'foo',
+        'BUILDER_NODE_0_AUTH_TLS_CERT': 'foo',
+        'BUILDER_NODE_0_AUTH_TLS_KEY': 'foo'
+      },
+      [
+        path.join(credsdir, 'cacert_graviton2-1234.pem'),
+        path.join(credsdir, 'cert_graviton2-1234.pem'),
+        path.join(credsdir, 'key_graviton2-1234.pem')
+      ],
+      [
+        `cacert=${path.join(credsdir, 'cacert_graviton2-1234.pem')}`,
+        `cert=${path.join(credsdir, 'cert_graviton2-1234.pem')}`,
+        `key=${path.join(credsdir, 'key_graviton2-1234.pem')}`
+      ]
+    ],
+    [
+      'tcp://graviton2:1234',
+      'docker-container',
+      {
+        'BUILDER_NODE_0_AUTH_TLS_CACERT': 'foo',
+        'BUILDER_NODE_0_AUTH_TLS_CERT': 'foo',
+        'BUILDER_NODE_0_AUTH_TLS_KEY': 'foo'
+      },
+      [
+        path.join(credsdir, 'cacert_graviton2-1234.pem'),
+        path.join(credsdir, 'cert_graviton2-1234.pem'),
+        path.join(credsdir, 'key_graviton2-1234.pem')
+      ],
+      []
+    ],
+  ])('given %p endpoint', async (endpoint: string, driver: string, envs: Record<string, string>, expectedFiles: Array<string>, expectedOpts: Array<string>) => {
+    fs.mkdirSync(credsdir, {recursive: true});
+    for (const [key, value] of Object.entries(envs)) {
+      process.env[key] = value;
+    }
+    expect(auth.setCredentials(credsdir, 0, driver, endpoint)).toEqual(expectedOpts);
+    expectedFiles.forEach( (file) => {
+      expect(fs.existsSync(file)).toBe(true);
+    });
+  });
+});
--- a/tests/buildx.test.ts
+++ b/tests/buildx.test.ts
@ -7,18 +7,14 @@ import * as context from '../src/context';
 import * as semver from 'semver';
 import * as exec from '@actions/exec';

-const tmpNameSync = path.join('/tmp/.docker-setup-buildx-jest', '.tmpname-jest').split(path.sep).join(path.posix.sep);
-
+const tmpdir = fs.mkdtempSync(path.join(os.tmpdir(), 'docker-setup-buildx-')).split(path.sep).join(path.posix.sep);
 jest.spyOn(context, 'tmpDir').mockImplementation((): string => {
-  const tmpDir = path.join('/tmp/.docker-setup-buildx-jest').split(path.sep).join(path.posix.sep);
-  if (!fs.existsSync(tmpDir)) {
-    fs.mkdirSync(tmpDir, {recursive: true});
-  }
-  return tmpDir;
+  return tmpdir;
 });

+const tmpname = path.join(tmpdir, '.tmpname').split(path.sep).join(path.posix.sep);
 jest.spyOn(context, 'tmpNameSync').mockImplementation((): string => {
-  return tmpNameSync;
+  return tmpname;
 });

 describe('isAvailable', () => {
@ -77,10 +73,128 @@ describe('inspect', () => {
    expect(builder).not.toBeUndefined();
    expect(builder.name).not.toEqual('');
    expect(builder.driver).not.toEqual('');
-    expect(builder.node_platforms).not.toEqual('');
+    expect(builder.nodes).not.toEqual({});
  }, 100000);
 });

+describe('parseInspect', () => {
+  // prettier-ignore
+  test.each([
+    [
+     'inspect1.txt',
+     {
+       "nodes": [
+         {
+           "name": "builder-5cb467f7-0940-47e1-b94b-d51f54054d620",
+           "endpoint": "unix:///var/run/docker.sock",
+           "status": "running",
+           "buildkitd-flags": "--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host",
+           "buildkit": "v0.10.4",
+           "platforms": "linux/amd64,linux/amd64/v2,linux/amd64/v3,linux/amd64/v4,linux/arm64,linux/riscv64,linux/386,linux/arm/v7,linux/arm/v6"
+         }
+       ],
+       "name": "builder-5cb467f7-0940-47e1-b94b-d51f54054d62",
+       "driver": "docker-container"
+     }
+    ],
+    [
+     'inspect2.txt',
+     {
+       "nodes": [
+         {
+           "name": "builder-5f449644-ff29-48af-8344-abb0292d06730",
+           "endpoint": "unix:///var/run/docker.sock",
+           "driver-opts": [
+             "image=moby/buildkit:latest"
+           ],
+           "status": "running",
+           "buildkitd-flags": "--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host",
+           "buildkit": "v0.10.4",
+           "platforms": "linux/amd64,linux/amd64/v2,linux/amd64/v3,linux/amd64/v4,linux/386"
+         }
+       ],
+       "name": "builder-5f449644-ff29-48af-8344-abb0292d0673",
+       "driver": "docker-container"
+     }
+    ],
+    [
+     'inspect3.txt',
+     {
+       "nodes": [
+         {
+           "name": "builder-9929e463-7954-4dc3-89cd-514cca29ff800",
+           "endpoint": "unix:///var/run/docker.sock",
+           "driver-opts": [
+             "image=moby/buildkit:master",
+             "network=host"
+           ],
+           "status": "running",
+           "buildkitd-flags": "--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host",
+           "buildkit": "3fab389",
+           "platforms": "linux/amd64,linux/amd64/v2,linux/amd64/v3,linux/amd64/v4,linux/386"
+         }
+       ],
+       "name": "builder-9929e463-7954-4dc3-89cd-514cca29ff80",
+       "driver": "docker-container"
+     }
+    ],
+    [
+     'inspect4.txt',
+     {
+       "nodes": [
+         {
+           "name": "default",
+           "endpoint": "default",
+           "status": "running",
+           "buildkit": "20.10.17",
+           "platforms": "linux/amd64,linux/arm64,linux/riscv64,linux/ppc64le,linux/s390x,linux/386,linux/arm/v7,linux/arm/v6"
+         }
+       ],
+       "name": "default",
+       "driver": "docker"
+     }
+    ],
+    [
+     'inspect5.txt',
+     {
+       "nodes": [
+         {
+           "name": "aws_graviton2",
+           "endpoint": "tcp://1.23.45.67:1234",
+           "driver-opts": [
+             "cert=/home/user/.certs/aws_graviton2/cert.pem",
+             "key=/home/user/.certs/aws_graviton2/key.pem",
+             "cacert=/home/user/.certs/aws_graviton2/ca.pem"
+           ],
+           "status": "running",
+           "platforms": "darwin/arm64,linux/arm64,linux/arm/v5,linux/arm/v6,linux/arm/v7,windows/arm64"
+         }
+       ],
+       "name": "remote-builder",
+       "driver": "remote"
+     }
+    ],
+    [
+     'inspect6.txt',
+     {
+       "nodes": [
+         {
+           "name": "builder-17cfff01-48d9-4c3d-9332-9992e308a5100",
+           "endpoint": "unix:///var/run/docker.sock",
+           "status": "running",
+           "buildkitd-flags": "--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host",
+           "platforms": "linux/amd64,linux/amd64/v2,linux/amd64/v3,linux/386"
+         }
+       ],
+       "name": "builder-17cfff01-48d9-4c3d-9332-9992e308a510",
+       "driver": "docker-container"
+     }
+    ],
+  ])('given %p', async (inspectFile, expected) => {
+    expect(await buildx.parseInspect(fs.readFileSync(path.join(__dirname, 'fixtures', inspectFile)).toString())).toEqual(expected);
+  });
+});
+
 describe('build', () => {
  const tmpDir = fs.mkdtempSync(path.join(os.tmpdir(), 'setup-buildx-'));

@ -107,7 +221,7 @@ describe('install', () => {
  ])(
    'acquires %p of buildx (standalone: %p)',
    async (version, standalone) => {
-      const buildxBin = await buildx.install(version, tmpDir, standalone);
+      const buildxBin = await buildx.install(version, process.env.GITHUB_TOKEN || '', tmpDir, standalone);
      expect(fs.existsSync(buildxBin)).toBe(true);
    },
    100000
@ -136,8 +250,8 @@ describe('getConfig', () => {
        config = await buildx.getConfigInline(val);
      }
      expect(true).toBe(!invalid);
-      expect(config).toEqual(`${tmpNameSync}`);
-      const configValue = fs.readFileSync(tmpNameSync, 'utf-8');
+      expect(config).toEqual(tmpname);
+      const configValue = fs.readFileSync(tmpname, 'utf-8');
      expect(configValue).toEqual(exValue);
    } catch (err) {
      // eslint-disable-next-line jest/no-conditional-expect
--- a/tests/context.test.ts
+++ b/tests/context.test.ts
@ -1,19 +1,206 @@
-import {beforeEach, describe, expect, it, jest} from '@jest/globals';
+import {beforeEach, describe, expect, it, jest, test} from '@jest/globals';
 import * as fs from 'fs';
 import * as os from 'os';
 import * as path from 'path';
+import * as uuid from 'uuid';
 import * as context from '../src/context';
+import * as nodes from '../src/nodes';

+const tmpdir = fs.mkdtempSync(path.join(os.tmpdir(), 'docker-setup-buildx-')).split(path.sep).join(path.posix.sep);
 jest.spyOn(context, 'tmpDir').mockImplementation((): string => {
-  const tmpDir = path.join('/tmp/.docker-setup-buildx-jest').split(path.sep).join(path.posix.sep);
-  if (!fs.existsSync(tmpDir)) {
-    fs.mkdirSync(tmpDir, {recursive: true});
-  }
-  return tmpDir;
+  return tmpdir;
 });

 jest.spyOn(context, 'tmpNameSync').mockImplementation((): string => {
-  return path.join('/tmp/.docker-setup-buildx-jest', '.tmpname-jest').split(path.sep).join(path.posix.sep);
+  return path.join(tmpdir, '.tmpname').split(path.sep).join(path.posix.sep);
+});
+
+jest.mock('uuid');
+jest.spyOn(uuid, 'v4').mockReturnValue('9b1deb4d-3b7d-4bad-9bdd-2b0d7b3dcb6d');
+
+describe('getCreateArgs', () => {
+  beforeEach(() => {
+    process.env = Object.keys(process.env).reduce((object, key) => {
+      if (!key.startsWith('INPUT_')) {
+        object[key] = process.env[key];
+      }
+      return object;
+    }, {});
+  });
+
+  // prettier-ignore
+  test.each([
+    [
+      0,
+      new Map<string, string>([
+        ['install', 'false'],
+        ['use', 'true'],
+      ]),
+      [
+        'create',
+        '--name', 'builder-9b1deb4d-3b7d-4bad-9bdd-2b0d7b3dcb6d',
+        '--driver', 'docker-container',
+        '--buildkitd-flags', '--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host',
+        '--use'
+      ]
+    ],
+    [
+      1,
+      new Map<string, string>([
+        ['driver', 'docker'],
+        ['install', 'false'],
+        ['use', 'true'],
+      ]),
+      [
+        'create',
+        '--name', 'default',
+        '--driver', 'docker',
+        '--buildkitd-flags', '--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host',
+        '--use'
+      ]
+    ],
+    [
+      2,
+      new Map<string, string>([
+        ['install', 'false'],
+        ['use', 'false'],
+        ['driver-opts', 'image=moby/buildkit:master\nnetwork=host'],
+      ]),
+      [
+        'create',
+        '--name', 'builder-9b1deb4d-3b7d-4bad-9bdd-2b0d7b3dcb6d',
+        '--driver', 'docker-container',
+        '--driver-opt', 'image=moby/buildkit:master',
+        '--driver-opt', 'network=host',
+        '--buildkitd-flags', '--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host'
+      ]
+    ],
+    [
+      3,
+      new Map<string, string>([
+        ['driver', 'remote'],
+        ['endpoint', 'tls://foo:1234'],
+        ['install', 'false'],
+        ['use', 'true'],
+      ]),
+      [
+        'create',
+        '--name', 'builder-9b1deb4d-3b7d-4bad-9bdd-2b0d7b3dcb6d',
+        '--driver', 'remote',
+        '--use',
+        'tls://foo:1234'
+      ]
+    ],
+    [
+      4,
+      new Map<string, string>([
+        ['driver', 'remote'],
+        ['platforms', 'linux/arm64,linux/arm/v7'],
+        ['endpoint', 'tls://foo:1234'],
+        ['install', 'false'],
+        ['use', 'true'],
+      ]),
+      [
+        'create',
+        '--name', 'builder-9b1deb4d-3b7d-4bad-9bdd-2b0d7b3dcb6d',
+        '--driver', 'remote',
+        '--platform', 'linux/arm64,linux/arm/v7',
+        '--use',
+        'tls://foo:1234'
+      ]
+    ],
+    [
+      5,
+      new Map<string, string>([
+        ['install', 'false'],
+        ['use', 'false'],
+        ['driver-opts', `"env.no_proxy=localhost,127.0.0.1,.mydomain"`],
+      ]),
+      [
+        'create',
+        '--name', 'builder-9b1deb4d-3b7d-4bad-9bdd-2b0d7b3dcb6d',
+        '--driver', 'docker-container',
+        '--driver-opt', '"env.no_proxy=localhost,127.0.0.1,.mydomain"',
+        '--buildkitd-flags', '--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host'
+      ]
+    ],
+    [
+      6,
+      new Map<string, string>([
+        ['install', 'false'],
+        ['use', 'false'],
+        ['platforms', 'linux/amd64\n"linux/arm64,linux/arm/v7"'],
+      ]),
+      [
+        'create',
+        '--name', 'builder-9b1deb4d-3b7d-4bad-9bdd-2b0d7b3dcb6d',
+        '--driver', 'docker-container',
+        '--buildkitd-flags', '--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host',
+        '--platform', 'linux/amd64,linux/arm64,linux/arm/v7'
+      ]
+    ],
+  ])(
+    '[%d] given %p as inputs, returns %p',
+    async (num: number, inputs: Map<string, string>, expected: Array<string>) => {
+      inputs.forEach((value: string, name: string) => {
+        setInput(name, value);
+      });
+      const inp = await context.getInputs();
+      const res = await context.getCreateArgs(inp, '0.9.0');
+      expect(res).toEqual(expected);
+    }
+  );
+});
+
+describe('getAppendArgs', () => {
+  beforeEach(() => {
+    process.env = Object.keys(process.env).reduce((object, key) => {
+      if (!key.startsWith('INPUT_')) {
+        object[key] = process.env[key];
+      }
+      return object;
+    }, {});
+  });
+
+  // prettier-ignore
+  test.each([
+    [
+      0,
+      new Map<string, string>([
+        ['install', 'false'],
+        ['use', 'true'],
+      ]),
+      {
+        "name": "aws_graviton2",
+        "endpoint": "ssh://me@graviton2",
+        "driver-opts": [
+          "image=moby/buildkit:latest"
+        ],
+        "buildkitd-flags": "--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host",
+        "platforms": "linux/arm64"
+      },
+      [
+        'create',
+        '--name', 'builder-9b1deb4d-3b7d-4bad-9bdd-2b0d7b3dcb6d',
+        '--append',
+        '--node', 'aws_graviton2',
+        '--driver-opt', 'image=moby/buildkit:latest',
+        '--buildkitd-flags', '--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host',
+        '--platform', 'linux/arm64',
+        'ssh://me@graviton2'
+      ]
+    ]
+  ])(
+    '[%d] given %p as inputs, returns %p',
+    async (num: number, inputs: Map<string, string>, node: nodes.Node, expected: Array<string>) => {
+      inputs.forEach((value: string, name: string) => {
+        setInput(name, value);
+      });
+      const inp = await context.getInputs();
+      const res = await context.getAppendArgs(inp, node, '0.9.0');
+      expect(res).toEqual(expected);
+    }
+  );
 });

 describe('getInputList', () => {
@ -85,30 +272,6 @@ describe('asyncForEach', () => {
  });
 });

-describe('setOutput', () => {
-  beforeEach(() => {
-    process.stdout.write = jest.fn() as typeof process.stdout.write;
-  });
-
-  // eslint-disable-next-line jest/expect-expect
-  it('setOutput produces the correct command', () => {
-    context.setOutput('some output', 'some value');
-    assertWriteCalls([`::set-output name=some output::some value${os.EOL}`]);
-  });
-
-  // eslint-disable-next-line jest/expect-expect
-  it('setOutput handles bools', () => {
-    context.setOutput('some output', false);
-    assertWriteCalls([`::set-output name=some output::false${os.EOL}`]);
-  });
-
-  // eslint-disable-next-line jest/expect-expect
-  it('setOutput handles numbers', () => {
-    context.setOutput('some output', 1.01);
-    assertWriteCalls([`::set-output name=some output::1.01${os.EOL}`]);
-  });
-});
-
 // See: https://github.com/actions/toolkit/blob/master/packages/core/src/core.ts#L67
 function getInputName(name: string): string {
  return `INPUT_${name.replace(/ /g, '_').toUpperCase()}`;
@ -117,11 +280,3 @@ function getInputName(name: string): string {
 function setInput(name: string, value: string): void {
  process.env[getInputName(name)] = value;
 }
-
-// Assert that process.stdout.write calls called only with the given arguments.
-function assertWriteCalls(calls: string[]): void {
-  expect(process.stdout.write).toHaveBeenCalledTimes(calls.length);
-  for (let i = 0; i < calls.length; i++) {
-    expect(process.stdout.write).toHaveBeenNthCalledWith(i + 1, calls[i]);
-  }
-}
--- a/tests/fixtures/inspect1.txt
+++ b/tests/fixtures/inspect1.txt
@ -0,0 +1,10 @@
+Name:   builder-5cb467f7-0940-47e1-b94b-d51f54054d62
+Driver: docker-container
+
+Nodes:
+Name:      builder-5cb467f7-0940-47e1-b94b-d51f54054d620
+Endpoint:  unix:///var/run/docker.sock
+Status:    running
+Flags:     --allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host
+Buildkit:  v0.10.4
+Platforms: linux/amd64, linux/amd64/v2, linux/amd64/v3, linux/amd64/v4, linux/arm64, linux/riscv64, linux/386, linux/arm/v7, linux/arm/v6
--- a/tests/fixtures/inspect2.txt
+++ b/tests/fixtures/inspect2.txt
@ -0,0 +1,11 @@
+Name:   builder-5f449644-ff29-48af-8344-abb0292d0673
+Driver: docker-container
+
+Nodes:
+Name:           builder-5f449644-ff29-48af-8344-abb0292d06730
+Endpoint:       unix:///var/run/docker.sock
+Driver Options: image="moby/buildkit:latest"
+Status:         running
+Flags:          --allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host
+Buildkit:       v0.10.4
+Platforms:      linux/amd64, linux/amd64/v2, linux/amd64/v3, linux/amd64/v4, linux/386
--- a/tests/fixtures/inspect3.txt
+++ b/tests/fixtures/inspect3.txt
@ -0,0 +1,11 @@
+Name:   builder-9929e463-7954-4dc3-89cd-514cca29ff80
+Driver: docker-container
+
+Nodes:
+Name:           builder-9929e463-7954-4dc3-89cd-514cca29ff800
+Endpoint:       unix:///var/run/docker.sock
+Driver Options: image="moby/buildkit:master" network="host"
+Status:         running
+Flags:          --allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host
+Buildkit:       3fab389
+Platforms:      linux/amd64, linux/amd64/v2, linux/amd64/v3, linux/amd64/v4, linux/386
--- a/tests/fixtures/inspect4.txt
+++ b/tests/fixtures/inspect4.txt
@ -0,0 +1,9 @@
+Name:   default
+Driver: docker
+
+Nodes:
+Name:      default
+Endpoint:  default
+Status:    running
+Buildkit:  20.10.17
+Platforms: linux/amd64, linux/arm64, linux/riscv64, linux/ppc64le, linux/s390x, linux/386, linux/arm/v7, linux/arm/v6
--- a/tests/fixtures/inspect5.txt
+++ b/tests/fixtures/inspect5.txt
@ -0,0 +1,9 @@
+Name:   remote-builder
+Driver: remote
+
+Nodes:
+Name:           aws_graviton2
+Endpoint:       tcp://1.23.45.67:1234
+Driver Options: cert="/home/user/.certs/aws_graviton2/cert.pem" key="/home/user/.certs/aws_graviton2/key.pem" cacert="/home/user/.certs/aws_graviton2/ca.pem"
+Status:         running
+Platforms:      darwin/arm64*, linux/arm64*, linux/arm/v5*, linux/arm/v6*, linux/arm/v7*, windows/arm64*, linux/amd64, linux/amd64/v2, linux/riscv64, linux/ppc64le, linux/s390x, linux/mips64le, linux/mips64
--- a/tests/fixtures/inspect6.txt
+++ b/tests/fixtures/inspect6.txt
@ -0,0 +1,9 @@
+Name:   builder-17cfff01-48d9-4c3d-9332-9992e308a510
+Driver: docker-container
+
+Nodes:
+Name:      builder-17cfff01-48d9-4c3d-9332-9992e308a5100
+Endpoint:  unix:///var/run/docker.sock
+Status:    running
+Flags:     --allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host
+Platforms: linux/amd64, linux/amd64/v2, linux/amd64/v3, linux/386
--- a/tests/github.test.ts
+++ b/tests/github.test.ts
@ -3,14 +3,18 @@ import * as github from '../src/github';

 describe('github', () => {
  it('returns latest buildx GitHub release', async () => {
-    const release = await github.getRelease('latest');
+    const release = await github.getLatestRelease(process.env.GITHUB_TOKEN || '');
    expect(release).not.toBeNull();
    expect(release?.tag_name).not.toEqual('');
  });

  it('returns v0.2.2 buildx GitHub release', async () => {
-    const release = await github.getRelease('v0.2.2');
+    const release = await github.getReleaseTag('v0.2.2', process.env.GITHUB_TOKEN || '');
    expect(release).not.toBeNull();
    expect(release?.tag_name).toEqual('v0.2.2');
  });
+
+  it('unknown release', async () => {
+    await expect(github.getReleaseTag('foo', process.env.GITHUB_TOKEN || '')).rejects.toThrowError(new Error('Cannot get release foo: HttpError: Not Found'));
+  });
 });
--- a/action.yml
+++ b/action.yml
@ -22,7 +22,7 @@ inputs:
    default: '--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host'
    required: false
  install:
-    description: 'Sets up docker build command as an alias to docker buildx'
+    description: 'Sets up docker build command as an alias to docker buildx build'
    default: 'false'
    required: false
  use:
@ -32,26 +32,43 @@ inputs:
  endpoint:
    description: 'Optional address for docker socket or context from `docker context ls`'
    required: false
+  platforms:
+    description: 'Fixed platforms for current node. If not empty, values take priority over the detected ones'
+    required: false
  config:
    description: 'BuildKit config file'
    required: false
  config-inline:
    description: 'Inline BuildKit config'
    required: false
+  append:
+    description: 'Append additional nodes to the builder'
+    required: false
+  github_token:
+    # https://github.com/actions/setup-go/blob/21459d0b7b1d63741429b748885bf5a4974593b4/action.yml#L12-L14
+    description: >
+      Used to verifiy the Git tag exists on docker/buildx repo. Since there's a
+      default, this is typically not supplied by the user. When running this
+      action on github.com, the default value is sufficient. When running on
+      GHES, you can pass a personal access token for github.com if you are
+      experiencing rate limiting.
+    default: ${{ github.server_url == 'https://github.com' && github.token || '' }}

 outputs:
  name:
    description: 'Builder name'
  driver:
    description: 'Builder driver'
-  endpoint:
-    description: 'Builder node endpoint'
-  status:
-    description: 'Builder node status'
-  flags:
-    description: 'Builder node flags (if applicable)'
  platforms:
-    description: 'Builder node platforms available (comma separated)'
+    description: 'Builder node platforms (preferred or available)'
+  nodes:
+    description: 'Builder nodes metadata'
+  endpoint:
+    description: 'Builder node endpoint (deprecated, use nodes output instead)'
+  status:
+    description: 'Builder node status (deprecated, use nodes output instead)'
+  flags:
+    description: 'Builder node flags (deprecated, use nodes output instead)'

 runs:
  using: 'node16'
--- a/dev.Dockerfile
+++ b/dev.Dockerfile
@ -72,7 +72,8 @@ RUN --mount=type=bind,target=.,rw \
  --mount=type=cache,target=/src/node_modules \
  --mount=type=bind,from=docker,source=/usr/local/bin/docker,target=/usr/bin/docker \
  --mount=type=bind,from=buildx,source=/buildx,target=/usr/libexec/docker/cli-plugins/docker-buildx \
-  yarn run test --coverageDirectory=/tmp/coverage
+  --mount=type=secret,id=GITHUB_TOKEN \
+  GITHUB_TOKEN=$(cat /run/secrets/GITHUB_TOKEN) yarn run test --coverageDirectory=/tmp/coverage

 FROM scratch AS test-coverage
 COPY --from=test /tmp/coverage /
--- a/dist/index.js
+++ b/dist/index.js
--- a/dist/index.js.map
+++ b/dist/index.js.map
--- a/dist/licenses.txt
+++ b/dist/licenses.txt
@ -22,6 +22,18 @@ The above copyright notice and this permission notice shall be included in all c

 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

+@actions/github
+MIT
+The MIT License (MIT)
+
+Copyright 2019 GitHub
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
@actions/http-client
 MIT
 Actions Http Client for Node.js
@ -71,6 +83,188 @@ The above copyright notice and this permission notice shall be included in all c

 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

+@octokit/auth-token
+MIT
+The MIT License
+
+Copyright (c) 2019 Octokit contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+
+@octokit/core
+MIT
+The MIT License
+
+Copyright (c) 2019 Octokit contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+
+@octokit/endpoint
+MIT
+The MIT License
+
+Copyright (c) 2018 Octokit contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+
+@octokit/graphql
+MIT
+The MIT License
+
+Copyright (c) 2018 Octokit contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+
+@octokit/plugin-paginate-rest
+MIT
+MIT License Copyright (c) 2019 Octokit contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+
+@octokit/plugin-rest-endpoint-methods
+MIT
+MIT License Copyright (c) 2019 Octokit contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+
+@octokit/request
+MIT
+The MIT License
+
+Copyright (c) 2018 Octokit contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+
+@octokit/request-error
+MIT
+The MIT License
+
+Copyright (c) 2019 Octokit contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+
+@vercel/ncc
+MIT
+Copyright 2018 ZEIT, Inc.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
 balanced-match
 MIT
 (MIT)
@ -96,6 +290,211 @@ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.


+before-after-hook
+Apache-2.0
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "{}"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright 2018 Gregor Martynus and other contributors.
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
+
+
 brace-expansion
 MIT
 MIT License
@ -143,6 +542,50 @@ IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.


+csv-parse
+MIT
+The MIT License (MIT)
+
+Copyright (c) 2010 Adaltas
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+
+deprecation
+ISC
+The ISC License
+
+Copyright (c) Gregor Martynus and contributors
+
+Permission to use, copy, modify, and/or distribute this software for any
+purpose with or without fee is hereby granted, provided that the above
+copyright notice and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
+IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+
 fs.realpath
 ISC
 The ISC License
@ -254,6 +697,56 @@ PERFORMANCE OF THIS SOFTWARE.



+is-plain-object
+MIT
+The MIT License (MIT)
+
+Copyright (c) 2014-2017, Jon Schlinkert.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+
+js-yaml
+MIT
+(The MIT License)
+
+Copyright (C) 2011-2015 by Vitaly Puzrin
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+
 lru-cache
 ISC
 The ISC License
@ -292,6 +785,32 @@ ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
 IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.


+node-fetch
+MIT
+The MIT License (MIT)
+
+Copyright (c) 2016 David Frank
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+
+
 once
 ISC
 The ISC License
@ -399,6 +918,9 @@ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.


+tr46
+MIT
+
 tunnel
 MIT
 The MIT License (MIT)
@ -424,6 +946,17 @@ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 THE SOFTWARE.


+universal-user-agent
+ISC
+# [ISC License](https://spdx.org/licenses/ISC)
+
+Copyright (c) 2018, Gregor Martynus (https://github.com/gr2m)
+
+Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+
 uuid
 MIT
 The MIT License (MIT)
@ -437,6 +970,47 @@ The above copyright notice and this permission notice shall be included in all c
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.


+webidl-conversions
+BSD-2-Clause
+# The BSD 2-Clause License
+
+Copyright (c) 2014, Domenic Denicola
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+whatwg-url
+MIT
+The MIT License (MIT)
+
+Copyright (c) 2015–2016 Sebastian Mayr
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+
 wrappy
 ISC
 The ISC License
--- a/docker-bake.hcl
+++ b/docker-bake.hcl
@ -50,4 +50,5 @@ target "test" {
  dockerfile = "dev.Dockerfile"
  target = "test-coverage"
  output = ["./coverage"]
+  secret = ["id=GITHUB_TOKEN,env=GITHUB_TOKEN"]
 }
--- a/docs/advanced/append-nodes.md
+++ b/docs/advanced/append-nodes.md
@ -0,0 +1,3 @@
+# Append additional nodes to the builder
+
+This page has moved to [Docker Docs website](https://docs.docker.com/build/ci/github-actions/configure-builder/#append-additional-nodes-to-the-builder)
--- a/docs/advanced/auth.md
+++ b/docs/advanced/auth.md
@ -0,0 +1,3 @@
+# Authentication support
+
+This page has moved to [Docker Docs website](https://docs.docker.com/build/ci/github-actions/configure-builder/#authentication-for-remote-builders)
--- a/docs/advanced/buildkit-config.md
+++ b/docs/advanced/buildkit-config.md
@ -0,0 +1,3 @@
+# BuildKit daemon configuration
+
+This page has moved to [Docker Docs website](https://docs.docker.com/build/ci/github-actions/configure-builder/#daemon-configuration)
--- a/docs/advanced/standalone.md
+++ b/docs/advanced/standalone.md
@ -0,0 +1,3 @@
+# Standalone mode
+
+This page has moved to [Docker Docs website](https://docs.docker.com/build/ci/github-actions/configure-builder/#standalone-mode)
--- a/jest.config.ts
+++ b/jest.config.ts
@ -1,10 +1,13 @@
 module.exports = {
  clearMocks: true,
  moduleFileExtensions: ['js', 'ts'],
-  setupFiles: ["dotenv/config"],
+  setupFiles: ['dotenv/config'],
  testMatch: ['**/*.test.ts'],
  transform: {
    '^.+\\.ts$': 'ts-jest'
  },
+  moduleNameMapper: {
+    '^csv-parse/sync': '<rootDir>/node_modules/csv-parse/dist/cjs/sync.cjs'
+  },
  verbose: true
-}
+};
--- a/package.json
+++ b/package.json
@ -27,13 +27,15 @@
  ],
  "license": "Apache-2.0",
  "dependencies": {
-    "@actions/core": "^1.6.0",
+    "@actions/core": "^1.10.0",
    "@actions/exec": "^1.1.1",
-    "@actions/http-client": "^1.0.11",
-    "@actions/tool-cache": "^1.7.2",
+    "@actions/github": "^5.1.1",
+    "@actions/tool-cache": "^2.0.1",
+    "csv-parse": "^5.3.3",
+    "js-yaml": "^4.1.0",
    "semver": "^7.3.7",
    "tmp": "^0.2.1",
-    "uuid": "^8.3.2"
+    "uuid": "^9.0.0"
  },
  "devDependencies": {
    "@types/node": "^16.11.26",
--- a/src/auth.ts
+++ b/src/auth.ts
@ -0,0 +1,51 @@
+import * as fs from 'fs';
+
+export const envPrefix = 'BUILDER_NODE';
+
+export function setCredentials(credsdir: string, index: number, driver: string, endpoint: string): Array<string> {
+  let url: URL;
+  try {
+    url = new URL(endpoint);
+  } catch (e) {
+    return [];
+  }
+  switch (url.protocol) {
+    case 'tcp:': {
+      return setBuildKitClientCerts(credsdir, index, driver, url);
+    }
+  }
+  return [];
+}
+
+function setBuildKitClientCerts(credsdir: string, index: number, driver: string, endpoint: URL): Array<string> {
+  const driverOpts: Array<string> = [];
+  const buildkitCacert = process.env[`${envPrefix}_${index}_AUTH_TLS_CACERT`] || '';
+  const buildkitCert = process.env[`${envPrefix}_${index}_AUTH_TLS_CERT`] || '';
+  const buildkitKey = process.env[`${envPrefix}_${index}_AUTH_TLS_KEY`] || '';
+  if (buildkitCacert.length == 0 && buildkitCert.length == 0 && buildkitKey.length == 0) {
+    return driverOpts;
+  }
+  let host = endpoint.hostname;
+  if (endpoint.port.length > 0) {
+    host += `-${endpoint.port}`;
+  }
+  if (buildkitCacert.length > 0) {
+    const cacertpath = `${credsdir}/cacert_${host}.pem`;
+    fs.writeFileSync(cacertpath, buildkitCacert);
+    driverOpts.push(`cacert=${cacertpath}`);
+  }
+  if (buildkitCert.length > 0) {
+    const certpath = `${credsdir}/cert_${host}.pem`;
+    fs.writeFileSync(certpath, buildkitCert);
+    driverOpts.push(`cert=${certpath}`);
+  }
+  if (buildkitKey.length > 0) {
+    const keypath = `${credsdir}/key_${host}.pem`;
+    fs.writeFileSync(keypath, buildkitKey);
+    driverOpts.push(`key=${keypath}`);
+  }
+  if (driver != 'remote') {
+    return [];
+  }
+  return driverOpts;
+}
--- a/src/buildx.ts
+++ b/src/buildx.ts
@ -12,11 +12,17 @@ import * as tc from '@actions/tool-cache';
 export type Builder = {
  name?: string;
  driver?: string;
-  node_name?: string;
-  node_endpoint?: string;
-  node_status?: string;
-  node_flags?: string;
-  node_platforms?: string;
+  nodes: Node[];
+};
+
+export type Node = {
+  name?: string;
+  endpoint?: string;
+  'driver-opts'?: Array<string>;
+  status?: string;
+  'buildkitd-flags'?: string;
+  buildkit?: string;
+  platforms?: string;
 };

 export async function getConfigInline(s: string): Promise<string> {
@ -98,48 +104,83 @@ export async function inspect(name: string, standalone?: boolean): Promise<Build
      if (res.stderr.length > 0 && res.exitCode != 0) {
        throw new Error(res.stderr.trim());
      }
-      const builder: Builder = {};
-      itlines: for (const line of res.stdout.trim().split(`\n`)) {
-        const [key, ...rest] = line.split(':');
-        const value = rest.map(v => v.trim()).join(':');
-        if (key.length == 0 || value.length == 0) {
-          continue;
-        }
-        switch (key) {
-          case 'Name': {
-            if (builder.name == undefined) {
-              builder.name = value;
-            } else {
-              builder.node_name = value;
-            }
-            break;
-          }
-          case 'Driver': {
-            builder.driver = value;
-            break;
-          }
-          case 'Endpoint': {
-            builder.node_endpoint = value;
-            break;
-          }
-          case 'Status': {
-            builder.node_status = value;
-            break;
-          }
-          case 'Flags': {
-            builder.node_flags = value;
-            break;
-          }
-          case 'Platforms': {
-            builder.node_platforms = value.replace(/\s/g, '');
-            break itlines;
-          }
-        }
-      }
-      return builder;
+      return parseInspect(res.stdout);
    });
 }

+export async function parseInspect(data: string): Promise<Builder> {
+  const builder: Builder = {
+    nodes: []
+  };
+  let node: Node = {};
+  for (const line of data.trim().split(`\n`)) {
+    const [key, ...rest] = line.split(':');
+    const value = rest.map(v => v.trim()).join(':');
+    if (key.length == 0 || value.length == 0) {
+      continue;
+    }
+    switch (key.toLowerCase()) {
+      case 'name': {
+        if (builder.name == undefined) {
+          builder.name = value;
+        } else {
+          if (Object.keys(node).length > 0) {
+            builder.nodes.push(node);
+            node = {};
+          }
+          node.name = value;
+        }
+        break;
+      }
+      case 'driver': {
+        builder.driver = value;
+        break;
+      }
+      case 'endpoint': {
+        node.endpoint = value;
+        break;
+      }
+      case 'driver options': {
+        node['driver-opts'] = (value.match(/(\w+)="([^"]*)"/g) || []).map(v => v.replace(/^(.*)="(.*)"$/g, '$1=$2'));
+        break;
+      }
+      case 'status': {
+        node.status = value;
+        break;
+      }
+      case 'flags': {
+        node['buildkitd-flags'] = value;
+        break;
+      }
+      case 'buildkit': {
+        node.buildkit = value;
+        break;
+      }
+      case 'platforms': {
+        let platforms: Array<string> = [];
+        // if a preferred platform is being set then use only these
+        // https://docs.docker.com/engine/reference/commandline/buildx_inspect/#get-information-about-a-builder-instance
+        if (value.includes('*')) {
+          for (const platform of value.split(', ')) {
+            if (platform.includes('*')) {
+              platforms.push(platform.replace('*', ''));
+            }
+          }
+        } else {
+          // otherwise set all platforms available
+          platforms = value.split(', ');
+        }
+        node.platforms = platforms.join(',');
+        break;
+      }
+    }
+  }
+  if (Object.keys(node).length > 0) {
+    builder.nodes.push(node);
+  }
+  return builder;
+}
+
 export async function build(inputBuildRef: string, dest: string, standalone: boolean): Promise<string> {
  // eslint-disable-next-line prefer-const
  let [repo, ref] = inputBuildRef.split('#');
@ -196,10 +237,12 @@ export async function build(inputBuildRef: string, dest: string, standalone: boo
  return setPlugin(toolPath, dest);
 }

-export async function install(inputVersion: string, dest: string, standalone: boolean): Promise<string> {
-  const release: github.GitHubRelease | null = await github.getRelease(inputVersion);
-  if (!release) {
-    throw new Error(`Cannot find buildx ${inputVersion} release`);
+export async function install(inputVersion: string, githubToken: string, dest: string, standalone: boolean): Promise<string> {
+  let release: github.Release;
+  if (inputVersion == 'latest') {
+    release = await github.getLatestRelease(githubToken);
+  } else {
+    release = await github.getReleaseTag(inputVersion, githubToken);
  }
  core.debug(`Release ${release.tag_name} found`);
  const version = release.tag_name.replace(/^v+|v+$/g, '');
--- a/src/context.ts
+++ b/src/context.ts
@ -2,8 +2,11 @@ import fs from 'fs';
 import * as os from 'os';
 import path from 'path';
 import * as tmp from 'tmp';
+import * as uuid from 'uuid';
+import {parse} from 'csv-parse/sync';
+import * as buildx from './buildx';
+import * as nodes from './nodes';
 import * as core from '@actions/core';
-import {issueCommand} from '@actions/core/lib/command';

 let _tmpDir: string;
 export const osPlat: string = os.platform();
@ -22,39 +25,130 @@ export function tmpNameSync(options?: tmp.TmpNameOptions): string {

 export interface Inputs {
  version: string;
+  name: string;
  driver: string;
  driverOpts: string[];
  buildkitdFlags: string;
+  platforms: string[];
  install: boolean;
  use: boolean;
  endpoint: string;
  config: string;
  configInline: string;
+  append: string;
+  githubToken: string;
 }

 export async function getInputs(): Promise<Inputs> {
  return {
    version: core.getInput('version'),
+    name: getBuilderName(core.getInput('driver') || 'docker-container'),
    driver: core.getInput('driver') || 'docker-container',
    driverOpts: await getInputList('driver-opts', true),
    buildkitdFlags: core.getInput('buildkitd-flags') || '--allow-insecure-entitlement security.insecure --allow-insecure-entitlement network.host',
+    platforms: await getInputList('platforms', false, true),
    install: core.getBooleanInput('install'),
    use: core.getBooleanInput('use'),
    endpoint: core.getInput('endpoint'),
    config: core.getInput('config'),
-    configInline: core.getInput('config-inline')
+    configInline: core.getInput('config-inline'),
+    append: core.getInput('append'),
+    githubToken: core.getInput('github_token')
  };
 }

-export async function getInputList(name: string, ignoreComma?: boolean): Promise<string[]> {
+export function getBuilderName(driver: string): string {
+  return driver == 'docker' ? 'default' : `builder-${uuid.v4()}`;
+}
+
+export async function getCreateArgs(inputs: Inputs, buildxVersion: string): Promise<Array<string>> {
+  const args: Array<string> = ['create', '--name', inputs.name, '--driver', inputs.driver];
+  if (buildx.satisfies(buildxVersion, '>=0.3.0')) {
+    await asyncForEach(inputs.driverOpts, async driverOpt => {
+      args.push('--driver-opt', driverOpt);
+    });
+    if (inputs.driver != 'remote' && inputs.buildkitdFlags) {
+      args.push('--buildkitd-flags', inputs.buildkitdFlags);
+    }
+  }
+  if (inputs.platforms.length > 0) {
+    args.push('--platform', inputs.platforms.join(','));
+  }
+  if (inputs.use) {
+    args.push('--use');
+  }
+  if (inputs.driver != 'remote') {
+    if (inputs.config) {
+      args.push('--config', await buildx.getConfigFile(inputs.config));
+    } else if (inputs.configInline) {
+      args.push('--config', await buildx.getConfigInline(inputs.configInline));
+    }
+  }
+  if (inputs.endpoint) {
+    args.push(inputs.endpoint);
+  }
+  return args;
+}
+
+export async function getAppendArgs(inputs: Inputs, node: nodes.Node, buildxVersion: string): Promise<Array<string>> {
+  const args: Array<string> = ['create', '--name', inputs.name, '--append'];
+  if (node.name) {
+    args.push('--node', node.name);
+  }
+  if (node['driver-opts'] && buildx.satisfies(buildxVersion, '>=0.3.0')) {
+    await asyncForEach(node['driver-opts'], async driverOpt => {
+      args.push('--driver-opt', driverOpt);
+    });
+    if (inputs.driver != 'remote' && node['buildkitd-flags']) {
+      args.push('--buildkitd-flags', node['buildkitd-flags']);
+    }
+  }
+  if (node.platforms) {
+    args.push('--platform', node.platforms);
+  }
+  if (node.endpoint) {
+    args.push(node.endpoint);
+  }
+  return args;
+}
+
+export async function getInspectArgs(inputs: Inputs, buildxVersion: string): Promise<Array<string>> {
+  const args: Array<string> = ['inspect', '--bootstrap'];
+  if (buildx.satisfies(buildxVersion, '>=0.4.0')) {
+    args.push('--builder', inputs.name);
+  }
+  return args;
+}
+
+export async function getInputList(name: string, ignoreComma?: boolean, escapeQuotes?: boolean): Promise<string[]> {
+  const res: Array<string> = [];
+
  const items = core.getInput(name);
  if (items == '') {
-    return [];
+    return res;
  }
-  return items
-    .split(/\r?\n/)
-    .filter(x => x)
-    .reduce<string[]>((acc, line) => acc.concat(!ignoreComma ? line.split(',').filter(x => x) : line).map(pat => pat.trim()), []);
+
+  const records = parse(items, {
+    columns: false,
+    relaxQuotes: true,
+    comment: '#',
+    relaxColumnCount: true,
+    skipEmptyLines: true,
+    quote: escapeQuotes ? `"` : false
+  });
+
+  for (const record of records as Array<string[]>) {
+    if (record.length == 1) {
+      res.push(record[0]);
+      continue;
+    } else if (!ignoreComma) {
+      res.push(...record);
+      continue;
+    }
+    res.push(record.join(','));
+  }
+
+  return res.filter(item => item).map(pat => pat.trim());
 }

 export const asyncForEach = async (array, callback) => {
@ -62,8 +156,3 @@ export const asyncForEach = async (array, callback) => {
    await callback(array[index], index, array);
  }
 };
-
-// FIXME: Temp fix https://github.com/actions/toolkit/issues/777
-export function setOutput(name: string, value: unknown): void {
-  issueCommand('set-output', {name}, value);
-}
--- a/src/github.ts
+++ b/src/github.ts
@ -1,12 +1,41 @@
-import * as httpm from '@actions/http-client';
+import * as github from '@actions/github';

-export interface GitHubRelease {
+export interface Release {
  id: number;
  tag_name: string;
 }

-export const getRelease = async (version: string): Promise<GitHubRelease | null> => {
-  const url = `https://github.com/docker/buildx/releases/${version}`;
-  const http: httpm.HttpClient = new httpm.HttpClient('setup-buildx');
-  return (await http.getJson<GitHubRelease>(url)).result;
+const [owner, repo] = 'docker/buildx'.split('/');
+
+export const getReleaseTag = async (tag: string, githubToken: string): Promise<Release> => {
+  return (
+    await github
+      .getOctokit(githubToken, {
+        baseUrl: 'https://api.github.com'
+      })
+      .rest.repos.getReleaseByTag({
+        owner,
+        repo,
+        tag
+      })
+      .catch(error => {
+        throw new Error(`Cannot get release ${tag}: ${error}`);
+      })
+  ).data as Release;
+};
+
+export const getLatestRelease = async (githubToken: string): Promise<Release> => {
+  return (
+    await github
+      .getOctokit(githubToken, {
+        baseUrl: 'https://api.github.com'
+      })
+      .rest.repos.getLatestRelease({
+        owner,
+        repo
+      })
+      .catch(error => {
+        throw new Error(`Cannot get latest release: ${error}`);
+      })
+  ).data as Release;
 };
--- a/src/main.ts
+++ b/src/main.ts
@ -1,9 +1,11 @@
+import * as fs from 'fs';
 import * as os from 'os';
 import * as path from 'path';
-import * as uuid from 'uuid';
+import * as auth from './auth';
 import * as buildx from './buildx';
 import * as context from './context';
 import * as docker from './docker';
+import * as nodes from './nodes';
 import * as stateHelper from './state-helper';
 import * as util from './util';
 import * as core from '@actions/core';
@ -40,7 +42,7 @@ async function run(): Promise<void> {
      core.endGroup();
    } else if (!(await buildx.isAvailable(standalone)) || inputs.version) {
      core.startGroup(`Download and install buildx`);
-      await buildx.install(inputs.version || 'latest', standalone ? context.tmpDir() : dockerConfigHome, standalone);
+      await buildx.install(inputs.version || 'latest', inputs.githubToken, standalone ? context.tmpDir() : dockerConfigHome, standalone);
      core.endGroup();
    }

@ -52,46 +54,44 @@ async function run(): Promise<void> {
      });
    });

-    const builderName: string = inputs.driver == 'docker' ? 'default' : `builder-${uuid.v4()}`;
-    context.setOutput('name', builderName);
-    stateHelper.setBuilderName(builderName);
+    core.setOutput('name', inputs.name);
+    stateHelper.setBuilderName(inputs.name);
+
+    const credsdir = path.join(dockerConfigHome, 'buildx', 'creds', inputs.name);
+    fs.mkdirSync(credsdir, {recursive: true});
+    stateHelper.setCredsDir(credsdir);

    if (inputs.driver !== 'docker') {
      core.startGroup(`Creating a new builder instance`);
-      const createArgs: Array<string> = ['create', '--name', builderName, '--driver', inputs.driver];
-      if (buildx.satisfies(buildxVersion, '>=0.3.0')) {
-        await context.asyncForEach(inputs.driverOpts, async driverOpt => {
-          createArgs.push('--driver-opt', driverOpt);
-        });
-        if (inputs.buildkitdFlags) {
-          createArgs.push('--buildkitd-flags', inputs.buildkitdFlags);
-        }
+      const authOpts = auth.setCredentials(credsdir, 0, inputs.driver, inputs.endpoint);
+      if (authOpts.length > 0) {
+        inputs.driverOpts = [...inputs.driverOpts, ...authOpts];
      }
-      if (inputs.use) {
-        createArgs.push('--use');
-      }
-      if (inputs.endpoint) {
-        createArgs.push(inputs.endpoint);
-      }
-      if (inputs.config) {
-        createArgs.push('--config', await buildx.getConfigFile(inputs.config));
-      } else if (inputs.configInline) {
-        createArgs.push('--config', await buildx.getConfigInline(inputs.configInline));
-      }
-      const createCmd = buildx.getCommand(createArgs, standalone);
+      const createCmd = buildx.getCommand(await context.getCreateArgs(inputs, buildxVersion), standalone);
      await exec.exec(createCmd.commandLine, createCmd.args);
      core.endGroup();
+    }

-      core.startGroup(`Booting builder`);
-      const bootstrapArgs: Array<string> = ['inspect', '--bootstrap'];
-      if (buildx.satisfies(buildxVersion, '>=0.4.0')) {
-        bootstrapArgs.push('--builder', builderName);
+    if (inputs.append) {
+      core.startGroup(`Appending node(s) to builder`);
+      let nodeIndex = 1;
+      for (const node of nodes.Parse(inputs.append)) {
+        const authOpts = auth.setCredentials(credsdir, nodeIndex, inputs.driver, node.endpoint || '');
+        if (authOpts.length > 0) {
+          node['driver-opts'] = [...(node['driver-opts'] || []), ...authOpts];
+        }
+        const appendCmd = buildx.getCommand(await context.getAppendArgs(inputs, node, buildxVersion), standalone);
+        await exec.exec(appendCmd.commandLine, appendCmd.args);
+        nodeIndex++;
      }
-      const bootstrapCmd = buildx.getCommand(bootstrapArgs, standalone);
-      await exec.exec(bootstrapCmd.commandLine, bootstrapCmd.args);
      core.endGroup();
    }

+    core.startGroup(`Booting builder`);
+    const inspectCmd = buildx.getCommand(await context.getInspectArgs(inputs, buildxVersion), standalone);
+    await exec.exec(inspectCmd.commandLine, inspectCmd.args);
+    core.endGroup();
+
    if (inputs.install) {
      if (standalone) {
        throw new Error(`Cannot set buildx as default builder without the Docker CLI`);
@ -102,22 +102,36 @@ async function run(): Promise<void> {
    }

    core.startGroup(`Inspect builder`);
-    const builder = await buildx.inspect(builderName, standalone);
+    const builder = await buildx.inspect(inputs.name, standalone);
+    const firstNode = builder.nodes[0];
+    const reducedPlatforms: Array<string> = [];
+    for (const node of builder.nodes) {
+      for (const platform of node.platforms?.split(',') || []) {
+        if (reducedPlatforms.indexOf(platform) > -1) {
+          continue;
+        }
+        reducedPlatforms.push(platform);
+      }
+    }
    core.info(JSON.stringify(builder, undefined, 2));
-    context.setOutput('driver', builder.driver);
-    context.setOutput('endpoint', builder.node_endpoint);
-    context.setOutput('status', builder.node_status);
-    context.setOutput('flags', builder.node_flags);
-    context.setOutput('platforms', builder.node_platforms);
+    core.setOutput('driver', builder.driver);
+    core.setOutput('platforms', reducedPlatforms.join(','));
+    core.setOutput('nodes', JSON.stringify(builder.nodes, undefined, 2));
+    core.setOutput('endpoint', firstNode.endpoint); // TODO: deprecated, to be removed in a later version
+    core.setOutput('status', firstNode.status); // TODO: deprecated, to be removed in a later version
+    core.setOutput('flags', firstNode['buildkitd-flags']); // TODO: deprecated, to be removed in a later version
    core.endGroup();

-    if (!standalone && inputs.driver == 'docker-container') {
-      stateHelper.setContainerName(`buildx_buildkit_${builder.node_name}`);
+    if (!standalone && builder.driver == 'docker-container') {
+      stateHelper.setContainerName(`buildx_buildkit_${firstNode.name}`);
      core.startGroup(`BuildKit version`);
-      core.info(await buildx.getBuildKitVersion(`buildx_buildkit_${builder.node_name}`));
+      for (const node of builder.nodes) {
+        const bkvers = await buildx.getBuildKitVersion(`buildx_buildkit_${node.name}`);
+        core.info(`${node.name}: ${bkvers}`);
+      }
      core.endGroup();
    }
-    if (core.isDebug() || builder.node_flags?.includes('--debug')) {
+    if (core.isDebug() || firstNode['buildkitd-flags']?.includes('--debug')) {
      stateHelper.setDebug('true');
    }
  } catch (error) {
@ -154,6 +168,11 @@ async function cleanup(): Promise<void> {
      });
    core.endGroup();
  }
+
+  if (stateHelper.credsDir.length > 0 && fs.existsSync(stateHelper.credsDir)) {
+    core.info(`Cleaning up credentials`);
+    fs.rmSync(stateHelper.credsDir, {recursive: true});
+  }
 }

 if (!stateHelper.IsPost) {
--- a/src/nodes.ts
+++ b/src/nodes.ts
@ -0,0 +1,13 @@
+import * as yaml from 'js-yaml';
+
+export type Node = {
+  name?: string;
+  endpoint?: string;
+  'driver-opts'?: Array<string>;
+  'buildkitd-flags'?: string;
+  platforms?: string;
+};
+
+export function Parse(data: string): Node[] {
+  return yaml.load(data) as Node[];
+}
--- a/src/state-helper.ts
+++ b/src/state-helper.ts
@ -5,6 +5,7 @@ export const IsDebug = !!process.env['STATE_isDebug'];
 export const standalone = process.env['STATE_standalone'] || '';
 export const builderName = process.env['STATE_builderName'] || '';
 export const containerName = process.env['STATE_containerName'] || '';
+export const credsDir = process.env['STATE_credsDir'] || '';

 export function setDebug(debug: string) {
  core.saveState('isDebug', debug);
@ -22,6 +23,10 @@ export function setContainerName(containerName: string) {
  core.saveState('containerName', containerName);
 }

+export function setCredsDir(credsDir: string) {
+  core.saveState('credsDir', credsDir);
+}
+
 if (!IsPost) {
  core.saveState('isPost', 'true');
 }
--- a/yarn.lock
+++ b/yarn.lock
@ -2,12 +2,13 @@
 # yarn lockfile v1


-"@actions/core@^1.2.6", "@actions/core@^1.6.0":
-  version "1.6.0"
-  resolved "https://registry.yarnpkg.com/@actions/core/-/core-1.6.0.tgz#0568e47039bfb6a9170393a73f3b7eb3b22462cb"
-  integrity sha512-NB1UAZomZlCV/LmJqkLhNTqtKfFXJZAUPcfl/zqG7EfsQdeUJtaWO98SGbuQ3pydJ3fHl2CvI/51OKYlCYYcaw==
+"@actions/core@^1.10.0", "@actions/core@^1.2.6":
+  version "1.10.0"
+  resolved "https://registry.yarnpkg.com/@actions/core/-/core-1.10.0.tgz#44551c3c71163949a2f06e94d9ca2157a0cfac4f"
+  integrity sha512-2aZDDa3zrrZbP5ZYg159sNoLRb61nQ7awl5pSvIq5Qpj81vwDzdMRKzkWJGJuwVvWpvZKx7vspJALyvaaIQyug==
  dependencies:
-    "@actions/http-client" "^1.0.11"
+    "@actions/http-client" "^2.0.1"
+    uuid "^8.3.2"

 "@actions/exec@^1.0.0", "@actions/exec@^1.1.1":
  version "1.1.1"
@ -16,26 +17,36 @@
  dependencies:
    "@actions/io" "^1.0.1"

-"@actions/http-client@^1.0.11", "@actions/http-client@^1.0.8":
-  version "1.0.11"
-  resolved "https://registry.yarnpkg.com/@actions/http-client/-/http-client-1.0.11.tgz#c58b12e9aa8b159ee39e7dd6cbd0e91d905633c0"
-  integrity sha512-VRYHGQV1rqnROJqdMvGUbY/Kn8vriQe/F9HR2AlYHzmKuM/p3kjNuXhmdBfcVgsvRWTz5C5XW5xvndZrVBuAYg==
+"@actions/github@^5.1.1":
+  version "5.1.1"
+  resolved "https://registry.yarnpkg.com/@actions/github/-/github-5.1.1.tgz#40b9b9e1323a5efcf4ff7dadd33d8ea51651bbcb"
+  integrity sha512-Nk59rMDoJaV+mHCOJPXuvB1zIbomlKS0dmSIqPGxd0enAXBnOfn4VWF+CGtRCwXZG9Epa54tZA7VIRlJDS8A6g==
  dependencies:
-    tunnel "0.0.6"
+    "@actions/http-client" "^2.0.1"
+    "@octokit/core" "^3.6.0"
+    "@octokit/plugin-paginate-rest" "^2.17.0"
+    "@octokit/plugin-rest-endpoint-methods" "^5.13.0"
+
+"@actions/http-client@^2.0.1":
+  version "2.0.1"
+  resolved "https://registry.yarnpkg.com/@actions/http-client/-/http-client-2.0.1.tgz#873f4ca98fe32f6839462a6f046332677322f99c"
+  integrity sha512-PIXiMVtz6VvyaRsGY268qvj57hXQEpsYogYOu2nrQhlf+XCGmZstmuZBbAybUl1nQGnvS1k1eEsQ69ZoD7xlSw==
+  dependencies:
+    tunnel "^0.0.6"

 "@actions/io@^1.0.1", "@actions/io@^1.1.1":
  version "1.1.1"
  resolved "https://registry.yarnpkg.com/@actions/io/-/io-1.1.1.tgz#4a157406309e212ab27ed3ae30e8c1d641686a66"
  integrity sha512-Qi4JoKXjmE0O67wAOH6y0n26QXhMKMFo7GD/4IXNVcrtLjUlGjGuVys6pQgwF3ArfGTQu0XpqaNr0YhED2RaRA==

-"@actions/tool-cache@^1.7.2":
-  version "1.7.2"
-  resolved "https://registry.yarnpkg.com/@actions/tool-cache/-/tool-cache-1.7.2.tgz#389ad15916f91999959c6b2865144839ecc571a9"
-  integrity sha512-GYlcgg/PK2RWBrGG2sFg6s7im3S94LMKuqAv8UPDq/pGTZbuEvmN4a95Fn1Z19OE+vt7UbUHeewOD5tEBT+4TQ==
+"@actions/tool-cache@^2.0.1":
+  version "2.0.1"
+  resolved "https://registry.yarnpkg.com/@actions/tool-cache/-/tool-cache-2.0.1.tgz#8a649b9c07838d9d750c9864814e66a7660ab720"
+  integrity sha512-iPU+mNwrbA8jodY8eyo/0S/QqCKDajiR8OxWTnSk/SnYg0sj8Hp4QcUEVC1YFpHWXtrfbQrE13Jz4k4HXJQKcA==
  dependencies:
    "@actions/core" "^1.2.6"
    "@actions/exec" "^1.0.0"
-    "@actions/http-client" "^1.0.8"
+    "@actions/http-client" "^2.0.1"
    "@actions/io" "^1.1.1"
    semver "^6.1.0"
    uuid "^3.3.2"
@ -800,6 +811,92 @@
    "@nodelib/fs.scandir" "2.1.5"
    fastq "^1.6.0"

+"@octokit/auth-token@^2.4.4":
+  version "2.5.0"
+  resolved "https://registry.yarnpkg.com/@octokit/auth-token/-/auth-token-2.5.0.tgz#27c37ea26c205f28443402477ffd261311f21e36"
+  integrity sha512-r5FVUJCOLl19AxiuZD2VRZ/ORjp/4IN98Of6YJoJOkY75CIBuYfmiNHGrDwXr+aLGG55igl9QrxX3hbiXlLb+g==
+  dependencies:
+    "@octokit/types" "^6.0.3"
+
+"@octokit/core@^3.6.0":
+  version "3.6.0"
+  resolved "https://registry.yarnpkg.com/@octokit/core/-/core-3.6.0.tgz#3376cb9f3008d9b3d110370d90e0a1fcd5fe6085"
+  integrity sha512-7RKRKuA4xTjMhY+eG3jthb3hlZCsOwg3rztWh75Xc+ShDWOfDDATWbeZpAHBNRpm4Tv9WgBMOy1zEJYXG6NJ7Q==
+  dependencies:
+    "@octokit/auth-token" "^2.4.4"
+    "@octokit/graphql" "^4.5.8"
+    "@octokit/request" "^5.6.3"
+    "@octokit/request-error" "^2.0.5"
+    "@octokit/types" "^6.0.3"
+    before-after-hook "^2.2.0"
+    universal-user-agent "^6.0.0"
+
+"@octokit/endpoint@^6.0.1":
+  version "6.0.12"
+  resolved "https://registry.yarnpkg.com/@octokit/endpoint/-/endpoint-6.0.12.tgz#3b4d47a4b0e79b1027fb8d75d4221928b2d05658"
+  integrity sha512-lF3puPwkQWGfkMClXb4k/eUT/nZKQfxinRWJrdZaJO85Dqwo/G0yOC434Jr2ojwafWJMYqFGFa5ms4jJUgujdA==
+  dependencies:
+    "@octokit/types" "^6.0.3"
+    is-plain-object "^5.0.0"
+    universal-user-agent "^6.0.0"
+
+"@octokit/graphql@^4.5.8":
+  version "4.8.0"
+  resolved "https://registry.yarnpkg.com/@octokit/graphql/-/graphql-4.8.0.tgz#664d9b11c0e12112cbf78e10f49a05959aa22cc3"
+  integrity sha512-0gv+qLSBLKF0z8TKaSKTsS39scVKF9dbMxJpj3U0vC7wjNWFuIpL/z76Qe2fiuCbDRcJSavkXsVtMS6/dtQQsg==
+  dependencies:
+    "@octokit/request" "^5.6.0"
+    "@octokit/types" "^6.0.3"
+    universal-user-agent "^6.0.0"
+
+"@octokit/openapi-types@^12.11.0":
+  version "12.11.0"
+  resolved "https://registry.yarnpkg.com/@octokit/openapi-types/-/openapi-types-12.11.0.tgz#da5638d64f2b919bca89ce6602d059f1b52d3ef0"
+  integrity sha512-VsXyi8peyRq9PqIz/tpqiL2w3w80OgVMwBHltTml3LmVvXiphgeqmY9mvBw9Wu7e0QWk/fqD37ux8yP5uVekyQ==
+
+"@octokit/plugin-paginate-rest@^2.17.0":
+  version "2.21.3"
+  resolved "https://registry.yarnpkg.com/@octokit/plugin-paginate-rest/-/plugin-paginate-rest-2.21.3.tgz#7f12532797775640dbb8224da577da7dc210c87e"
+  integrity sha512-aCZTEf0y2h3OLbrgKkrfFdjRL6eSOo8komneVQJnYecAxIej7Bafor2xhuDJOIFau4pk0i/P28/XgtbyPF0ZHw==
+  dependencies:
+    "@octokit/types" "^6.40.0"
+
+"@octokit/plugin-rest-endpoint-methods@^5.13.0":
+  version "5.16.2"
+  resolved "https://registry.yarnpkg.com/@octokit/plugin-rest-endpoint-methods/-/plugin-rest-endpoint-methods-5.16.2.tgz#7ee8bf586df97dd6868cf68f641354e908c25342"
+  integrity sha512-8QFz29Fg5jDuTPXVtey05BLm7OB+M8fnvE64RNegzX7U+5NUXcOcnpTIK0YfSHBg8gYd0oxIq3IZTe9SfPZiRw==
+  dependencies:
+    "@octokit/types" "^6.39.0"
+    deprecation "^2.3.1"
+
+"@octokit/request-error@^2.0.5", "@octokit/request-error@^2.1.0":
+  version "2.1.0"
+  resolved "https://registry.yarnpkg.com/@octokit/request-error/-/request-error-2.1.0.tgz#9e150357831bfc788d13a4fd4b1913d60c74d677"
+  integrity sha512-1VIvgXxs9WHSjicsRwq8PlR2LR2x6DwsJAaFgzdi0JfJoGSO8mYI/cHJQ+9FbN21aa+DrgNLnwObmyeSC8Rmpg==
+  dependencies:
+    "@octokit/types" "^6.0.3"
+    deprecation "^2.0.0"
+    once "^1.4.0"
+
+"@octokit/request@^5.6.0", "@octokit/request@^5.6.3":
+  version "5.6.3"
+  resolved "https://registry.yarnpkg.com/@octokit/request/-/request-5.6.3.tgz#19a022515a5bba965ac06c9d1334514eb50c48b0"
+  integrity sha512-bFJl0I1KVc9jYTe9tdGGpAMPy32dLBXXo1dS/YwSCTL/2nd9XeHsY616RE3HPXDVk+a+dBuzyz5YdlXwcDTr2A==
+  dependencies:
+    "@octokit/endpoint" "^6.0.1"
+    "@octokit/request-error" "^2.1.0"
+    "@octokit/types" "^6.16.1"
+    is-plain-object "^5.0.0"
+    node-fetch "^2.6.7"
+    universal-user-agent "^6.0.0"
+
+"@octokit/types@^6.0.3", "@octokit/types@^6.16.1", "@octokit/types@^6.39.0", "@octokit/types@^6.40.0":
+  version "6.41.0"
+  resolved "https://registry.yarnpkg.com/@octokit/types/-/types-6.41.0.tgz#e58ef78d78596d2fb7df9c6259802464b5f84a04"
+  integrity sha512-eJ2jbzjdijiL3B4PrSQaSjuF2sPEQPVCPzBvTHJD9Nz+9dw2SGH4K4xeQJ77YfTq5bRQ+bD8wT11JbeDPmxmGg==
+  dependencies:
+    "@octokit/openapi-types" "^12.11.0"
+
 "@sinonjs/commons@^1.7.0":
  version "1.8.3"
  resolved "https://registry.yarnpkg.com/@sinonjs/commons/-/commons-1.8.3.tgz#3802ddd21a50a949b6721ddd72da36e67e7f1b2d"
@ -1233,6 +1330,11 @@ balanced-match@^1.0.0:
  resolved "https://registry.yarnpkg.com/balanced-match/-/balanced-match-1.0.2.tgz#e83e3a7e3f300b34cb9d87f615fa0cbf357690ee"
  integrity sha512-3oSeUO0TMV67hN1AmbXsK4yaqU7tjiHlbxRDZOpH0KW9+CeX4bRAaX0Anxt0tx2MrpRpWwQaPwIlISEJhYU5Pw==

+before-after-hook@^2.2.0:
+  version "2.2.3"
+  resolved "https://registry.yarnpkg.com/before-after-hook/-/before-after-hook-2.2.3.tgz#c51e809c81a4e354084422b9b26bad88249c517c"
+  integrity sha512-NzUnlZexiaH/46WDhANlyR2bXRopNg4F/zuSA3OpZnllCUgRaOF2znDioDWrmbNVsuZk6l9pMquQB38cfBZwkQ==
+
 brace-expansion@^1.1.7:
  version "1.1.11"
  resolved "https://registry.yarnpkg.com/brace-expansion/-/brace-expansion-1.1.11.tgz#3c7fcbf529d87226f3d2f52b966ff5271eb441dd"
@ -1409,7 +1511,7 @@ combined-stream@^1.0.8:
 concat-map@0.0.1:
  version "0.0.1"
  resolved "https://registry.yarnpkg.com/concat-map/-/concat-map-0.0.1.tgz#d8a96bd77fd68df7793a73036a3ba0d5405d477b"
-  integrity sha1-2Klr13/Wjfd5OnMDajug1UBdR3s=
+  integrity sha512-/Srv4dswyQNBfohGpz9o6Yb3Gz3SrUDqBH5rTuhGR7ahtlbYKnVxw2bCFMRljaA7EXHaXZ8wsHdodFvbkhKmqg==

 convert-source-map@^1.4.0, convert-source-map@^1.6.0, convert-source-map@^1.7.0:
  version "1.8.0"
@ -1449,6 +1551,11 @@ cssstyle@^2.3.0:
  dependencies:
    cssom "~0.3.6"

+csv-parse@^5.3.3:
+  version "5.3.3"
+  resolved "https://registry.yarnpkg.com/csv-parse/-/csv-parse-5.3.3.tgz#3b75d2279e2edb550cbc54c65b25cbbf3d0033ad"
+  integrity sha512-kEWkAPleNEdhFNkHQpFHu9RYPogsFj3dx6bCxL847fsiLgidzWg0z/O0B1kVWMJUc5ky64zGp18LX2T3DQrOfw==
+
 data-urls@^2.0.0:
  version "2.0.0"
  resolved "https://registry.yarnpkg.com/data-urls/-/data-urls-2.0.0.tgz#156485a72963a970f5d5821aaf642bef2bf2db9b"
@ -1502,6 +1609,11 @@ delayed-stream@~1.0.0:
  resolved "https://registry.yarnpkg.com/delayed-stream/-/delayed-stream-1.0.0.tgz#df3ae199acadfb7d440aaae0b29e2272b24ec619"
  integrity sha1-3zrhmayt+31ECqrgsp4icrJOxhk=

+deprecation@^2.0.0, deprecation@^2.3.1:
+  version "2.3.1"
+  resolved "https://registry.yarnpkg.com/deprecation/-/deprecation-2.3.1.tgz#6368cbdb40abf3373b525ac87e4a260c3a700919"
+  integrity sha512-xmHIy4F3scKVwMsQ4WnVaS8bHOx0DmVwRywosKhaILI0ywMDWPtBSku2HNxRvF7jtwDRsoEwYQSfbxj8b7RlJQ==
+
 detect-newline@^3.0.0:
  version "3.1.0"
  resolved "https://registry.yarnpkg.com/detect-newline/-/detect-newline-3.1.0.tgz#576f5dfc63ae1a192ff192d8ad3af6308991b651"
@ -2093,6 +2205,11 @@ is-number@^7.0.0:
  resolved "https://registry.yarnpkg.com/is-number/-/is-number-7.0.0.tgz#7535345b896734d5f80c4d06c50955527a14f12b"
  integrity sha512-41Cifkg6e8TylSpdtTpeLVMqvSBEVzTttHvERD741+pnZ8ANv0004MRL43QKPDlK9cGvNp6NZWZUBlbGXYxxng==

+is-plain-object@^5.0.0:
+  version "5.0.0"
+  resolved "https://registry.yarnpkg.com/is-plain-object/-/is-plain-object-5.0.0.tgz#4427f50ab3429e9025ea7d52e9043a9ef4159344"
+  integrity sha512-VRSzKkbMm5jMDoKLbltAkFQ5Qr7VDiTFGXxYFXXowVj387GeGNOCsOH6Msy00SGZ3Fp84b1Naa1psqgcCIEP5Q==
+
 is-potential-custom-element-name@^1.0.1:
  version "1.0.1"
  resolved "https://registry.yarnpkg.com/is-potential-custom-element-name/-/is-potential-custom-element-name-1.0.1.tgz#171ed6f19e3ac554394edf78caa05784a45bebb5"
@ -2639,11 +2756,9 @@ json-stable-stringify-without-jsonify@^1.0.1:
  integrity sha1-nbe1lJatPzz+8wp1FC0tkwrXJlE=

 json5@2.x, json5@^2.1.2:
-  version "2.2.0"
-  resolved "https://registry.yarnpkg.com/json5/-/json5-2.2.0.tgz#2dfefe720c6ba525d9ebd909950f0515316c89a3"
-  integrity sha512-f+8cldu7X/y7RAJurMEJmdoKXGB/X550w2Nr3tTbezL6RwEE/iMcm+tZnXeoZtKuOq6ft8+CqzEkrIgx1fPoQA==
-  dependencies:
-    minimist "^1.2.5"
+  version "2.2.3"
+  resolved "https://registry.yarnpkg.com/json5/-/json5-2.2.3.tgz#78cd6f1a19bdc12b73db5ad0c61efd66c1e29283"
+  integrity sha512-XmOWe7eyHYH14cLdVPoyg+GOH3rYX++KpzrylJwSW98t3Nk+U8XOl8FWKOgwtzdb8lXGf6zYwDUzeHMWfxasyg==

 kleur@^3.0.3:
  version "3.0.3"
@ -2760,17 +2875,12 @@ mimic-fn@^2.1.0:
  integrity sha512-OqbOk5oEQeAZ8WXWydlu9HJjz9WVdEIvamMCcXmuqUYjTknH/sqsWvhQ3vgwKFRR1HpjvNBKQ37nbJgYzGqGcg==

 minimatch@^3.0.4:
-  version "3.0.4"
-  resolved "https://registry.yarnpkg.com/minimatch/-/minimatch-3.0.4.tgz#5166e286457f03306064be5497e8dbb0c3d32083"
-  integrity sha512-yJHVQEhyqPLUTgt9B83PXu6W3rx4MvvHvSUvToogpwoGDOUQ+yDrR0HRot+yOCdCO7u4hX3pWft6kWBBcqh0UA==
+  version "3.1.2"
+  resolved "https://registry.yarnpkg.com/minimatch/-/minimatch-3.1.2.tgz#19cd194bfd3e428f049a70817c038d89ab4be35b"
+  integrity sha512-J7p63hRiAjw1NDEww1W7i37+ByIrOWO5XQQAzZ3VOcL0PNybwpfmV/N05zFAzwQ9USyEcX6t3UO+K5aqBQOIHw==
  dependencies:
    brace-expansion "^1.1.7"

-minimist@^1.2.5:
-  version "1.2.6"
-  resolved "https://registry.yarnpkg.com/minimist/-/minimist-1.2.6.tgz#8637a5b759ea0d6e98702cfb3a9283323c93af44"
-  integrity sha512-Jsjnk4bw3YJqYzbdyBiNsPWHPfO++UGG749Cxs6peCu5Xg4nrena6OVxOYxrQTqww0Jmwt+Ref8rggumkTLz9Q==
-
 ms@2.1.2:
  version "2.1.2"
  resolved "https://registry.yarnpkg.com/ms/-/ms-2.1.2.tgz#d09d1f357b443f493382a8eb3ccd183872ae6009"
@ -2781,6 +2891,13 @@ natural-compare@^1.4.0:
  resolved "https://registry.yarnpkg.com/natural-compare/-/natural-compare-1.4.0.tgz#4abebfeed7541f2c27acfb29bdbbd15c8d5ba4f7"
  integrity sha1-Sr6/7tdUHywnrPspvbvRXI1bpPc=

+node-fetch@^2.6.7:
+  version "2.6.8"
+  resolved "https://registry.yarnpkg.com/node-fetch/-/node-fetch-2.6.8.tgz#a68d30b162bc1d8fd71a367e81b997e1f4d4937e"
+  integrity sha512-RZ6dBYuj8dRSfxpUSu+NsdF1dpPpluJxwOp+6IoDp/sH2QNDSvurYsAa+F1WxY2RjA1iP93xhcsUoYbF2XBqVg==
+  dependencies:
+    whatwg-url "^5.0.0"
+
 node-int64@^0.4.0:
  version "0.4.0"
  resolved "https://registry.yarnpkg.com/node-int64/-/node-int64-0.4.0.tgz#87a9065cdb355d3182d8f94ce11188b825c68a3b"
@ -2813,7 +2930,7 @@ nwsapi@^2.2.0:
  resolved "https://registry.yarnpkg.com/nwsapi/-/nwsapi-2.2.0.tgz#204879a9e3d068ff2a55139c2c772780681a38b7"
  integrity sha512-h2AatdwYH+JHiZpv7pt/gSX1XoRGb7L/qSIeuqA6GwYoF9w1vP1cw42TO0aI2pNyshRK5893hNSl+1//vHK7hQ==

-once@^1.3.0:
+once@^1.3.0, once@^1.4.0:
  version "1.4.0"
  resolved "https://registry.yarnpkg.com/once/-/once-1.4.0.tgz#583b1aa775961d4b113ac17d9c50baef9dd76bd1"
  integrity sha1-WDsap3WWHUsROsF9nFC6753Xa9E=
@ -3306,6 +3423,11 @@ tr46@^2.1.0:
  dependencies:
    punycode "^2.1.1"

+tr46@~0.0.3:
+  version "0.0.3"
+  resolved "https://registry.yarnpkg.com/tr46/-/tr46-0.0.3.tgz#8184fd347dac9cdc185992f3a6622e14b9d9ab6a"
+  integrity sha512-N3WMsuqV66lT30CrXNbEjx4GEwlow3v6rr4mCcv6prnfwhS01rkgyFdjPNBYd9br7LpXV1+Emh01fHnq2Gdgrw==
+
 ts-jest@^27.1.2:
  version "27.1.3"
  resolved "https://registry.yarnpkg.com/ts-jest/-/ts-jest-27.1.3.tgz#1f723e7e74027c4da92c0ffbd73287e8af2b2957"
@ -3351,7 +3473,7 @@ tsutils@^3.21.0:
  dependencies:
    tslib "^1.8.1"

-tunnel@0.0.6:
+tunnel@^0.0.6:
  version "0.0.6"
  resolved "https://registry.yarnpkg.com/tunnel/-/tunnel-0.0.6.tgz#72f1314b34a5b192db012324df2cc587ca47f92c"
  integrity sha512-1h/Lnq9yajKY2PEbBadPXj3VxsDDu844OnaAo52UVmIzIvwwtBPIuNvkjuzBlTWpfJyUbG3ez0KSBibQkj4ojg==
@ -3397,6 +3519,11 @@ typescript@^4.4.4:
  resolved "https://registry.yarnpkg.com/typescript/-/typescript-4.6.2.tgz#fe12d2727b708f4eef40f51598b3398baa9611d4"
  integrity sha512-HM/hFigTBHZhLXshn9sN37H085+hQGeJHJ/X7LpBWLID/fbc2acUMfU+lGD98X81sKP+pFa9f0DZmCwB9GnbAg==

+universal-user-agent@^6.0.0:
+  version "6.0.0"
+  resolved "https://registry.yarnpkg.com/universal-user-agent/-/universal-user-agent-6.0.0.tgz#3381f8503b251c0d9cd21bc1de939ec9df5480ee"
+  integrity sha512-isyNax3wXoKaulPDZWHQqbmIx1k2tb9fb3GGDBRxCscfYV2Ch7WxPArBsFEG8s/safwXTT7H4QGhaIkTp9447w==
+
 universalify@^0.1.2:
  version "0.1.2"
  resolved "https://registry.yarnpkg.com/universalify/-/universalify-0.1.2.tgz#b646f69be3942dabcecc9d6639c80dc105efaa66"
@ -3419,6 +3546,11 @@ uuid@^8.3.2:
  resolved "https://registry.yarnpkg.com/uuid/-/uuid-8.3.2.tgz#80d5b5ced271bb9af6c445f21a1a04c606cefbe2"
  integrity sha512-+NYs2QeMWy+GWFOEm9xnn6HCDp0l7QBD7ml8zLUmJ+93Q5NF0NocErnwkTkXVFNiX3/fpC6afS8Dhb/gz7R7eg==

+uuid@^9.0.0:
+  version "9.0.0"
+  resolved "https://registry.yarnpkg.com/uuid/-/uuid-9.0.0.tgz#592f550650024a38ceb0c562f2f6aa435761efb5"
+  integrity sha512-MXcSTerfPa4uqyzStbRoTgt5XIe3x5+42+q1sDuy3R5MDk66URdLMOZe5aPX/SQd+kuYAh0FdP/pO28IkQyTeg==
+
 v8-compile-cache-lib@^3.0.0:
  version "3.0.0"
  resolved "https://registry.yarnpkg.com/v8-compile-cache-lib/-/v8-compile-cache-lib-3.0.0.tgz#0582bcb1c74f3a2ee46487ceecf372e46bce53e8"
@ -3459,6 +3591,11 @@ walker@^1.0.7:
  dependencies:
    makeerror "1.0.x"

+webidl-conversions@^3.0.0:
+  version "3.0.1"
+  resolved "https://registry.yarnpkg.com/webidl-conversions/-/webidl-conversions-3.0.1.tgz#24534275e2a7bc6be7bc86611cc16ae0a5654871"
+  integrity sha512-2JAn3z8AR6rjK8Sm8orRC0h/bcl/DqL7tRPdGZ4I1CjdF+EaMLmYxBHyXuKL849eucPFhvBoxMsflfOb8kxaeQ==
+
 webidl-conversions@^5.0.0:
  version "5.0.0"
  resolved "https://registry.yarnpkg.com/webidl-conversions/-/webidl-conversions-5.0.0.tgz#ae59c8a00b121543a2acc65c0434f57b0fc11aff"
@ -3481,6 +3618,14 @@ whatwg-mimetype@^2.3.0:
  resolved "https://registry.yarnpkg.com/whatwg-mimetype/-/whatwg-mimetype-2.3.0.tgz#3d4b1e0312d2079879f826aff18dbeeca5960fbf"
  integrity sha512-M4yMwr6mAnQz76TbJm914+gPpB/nCwvZbJU28cUD6dR004SAxDLOOSUaB1JDRqLtaOV/vi0IC5lEAGFgrjGv/g==

+whatwg-url@^5.0.0:
+  version "5.0.0"
+  resolved "https://registry.yarnpkg.com/whatwg-url/-/whatwg-url-5.0.0.tgz#966454e8765462e37644d3626f6742ce8b70965d"
+  integrity sha512-saE57nupxk6v3HY35+jzBwYa0rKSy0XR8JSxZPwgLr7ys0IBzhGviA1/TUGJLmSVqs8pb9AnvICXEuOHLprYTw==
+  dependencies:
+    tr46 "~0.0.3"
+    webidl-conversions "^3.0.0"
+
 whatwg-url@^8.0.0, whatwg-url@^8.5.0:
  version "8.6.0"
  resolved "https://registry.yarnpkg.com/whatwg-url/-/whatwg-url-8.6.0.tgz#27c0205a4902084b872aecb97cf0f2a7a3011f4c"
Author	SHA1	Message	Date
CrazyMax	5e716dcfd6	Merge pull request #192 from crazy-max/support-ghes enforce baseUrl to api.github.com if action used on GHES	2023-01-28 03:02:07 +01:00
CrazyMax	a83788eef0	update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2023-01-28 02:47:03 +01:00
CrazyMax	d0d9a72195	pass the token input through on GHES Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2023-01-28 02:45:17 +01:00
CrazyMax	a8165e7b70	enforce baseUrl to api.github.com if action used on GHES Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2023-01-28 02:44:08 +01:00
CrazyMax	a024221c60	Merge pull request #191 from crazy-max/fix-dl-release use Octokit client to download buildx	2023-01-28 02:08:06 +01:00
CrazyMax	4c3fce4ab2	update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2023-01-28 01:48:35 +01:00
CrazyMax	7c965aebec	use Octokit client to download buildx Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2023-01-28 01:48:35 +01:00
CrazyMax	7932f6210d	Merge pull request #189 from docker/version-pinning-docs docs: add version pinning information to the README	2023-01-25 14:10:54 +01:00
Justin Chadwell	70deadb37a	docs: add version pinning information to the README This should provide an easy reference for users starting to use this action who want to pin versions, so that they can easily identify the different versioning pattern used by this action. Signed-off-by: Justin Chadwell <me@jedevc.com>	2023-01-25 13:07:15 +00:00
CrazyMax	165fe681b8	Merge pull request #184 from docker/dependabot/npm_and_yarn/json5-2.2.3 Bump json5 from 2.2.0 to 2.2.3	2023-01-08 18:33:12 +01:00
dependabot[bot]	2d305372c4	Bump json5 from 2.2.0 to 2.2.3 Bumps [json5](https://github.com/json5/json5) from 2.2.0 to 2.2.3. - [Release notes](https://github.com/json5/json5/releases) - [Changelog](https://github.com/json5/json5/blob/main/CHANGELOG.md) - [Commits](https://github.com/json5/json5/compare/v2.2.0...v2.2.3) --- updated-dependencies: - dependency-name: json5 dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com>	2023-01-07 04:55:11 +00:00
CrazyMax	c252a3bb80	Merge pull request #181 from docker/dependabot/npm_and_yarn/csv-parse-5.3.3 Bump csv-parse from 5.3.1 to 5.3.3	2022-12-19 21:09:29 +01:00
CrazyMax	4661366cb8	update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-12-19 21:03:54 +01:00
dependabot[bot]	03d7e8ebf0	Bump csv-parse from 5.3.1 to 5.3.3 Bumps [csv-parse](https://github.com/adaltas/node-csv/tree/HEAD/packages/csv-parse) from 5.3.1 to 5.3.3. - [Release notes](https://github.com/adaltas/node-csv/releases) - [Changelog](https://github.com/adaltas/node-csv/blob/master/packages/csv-parse/CHANGELOG.md) - [Commits](https://github.com/adaltas/node-csv/commits/csv-parse@5.3.3/packages/csv-parse) --- updated-dependencies: - dependency-name: csv-parse dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com>	2022-12-19 19:37:47 +00:00
CrazyMax	22f6533f7c	Merge pull request #182 from docker/dependabot/npm_and_yarn/minimatch-3.1.2 Bump minimatch from 3.0.4 to 3.1.2	2022-12-19 20:27:47 +01:00
CrazyMax	b30c61b0de	readme: fix badges Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-12-19 20:23:49 +01:00
CrazyMax	51cc8966ea	update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-12-19 20:22:54 +01:00
dependabot[bot]	db8b80b0d3	Bump minimatch from 3.0.4 to 3.1.2 Bumps [minimatch](https://github.com/isaacs/minimatch) from 3.0.4 to 3.1.2. - [Release notes](https://github.com/isaacs/minimatch/releases) - [Commits](https://github.com/isaacs/minimatch/compare/v3.0.4...v3.1.2) --- updated-dependencies: - dependency-name: minimatch dependency-type: indirect ... Signed-off-by: dependabot[bot] <support@github.com>	2022-11-29 17:55:03 +00:00
CrazyMax	39a1a82492	Merge pull request #180 from crazy-max/upd-docs docs: moved to docs website	2022-11-10 18:25:55 +01:00
CrazyMax	c77919d12e	docs: add contributing section Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-11-10 16:02:34 +01:00
CrazyMax	341de1b1a5	docs: moved to docs website Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-11-10 16:01:32 +01:00
CrazyMax	8c0edbc76e	Merge pull request #175 from crazy-max/input-list-quotes escape surrounding quotes for platforms input	2022-10-18 11:15:32 +02:00
CrazyMax	1fb9cbdb32	escape surrounding quotes for platforms input Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-18 11:06:34 +02:00
CrazyMax	693fdd6ca6	Merge pull request #174 from crazy-max/input-quote preserve quotes surrounding fields in input list	2022-10-18 10:37:08 +02:00
CrazyMax	fe4c1ac86d	preserve quotes surrounding fields in input list Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-17 20:44:03 +02:00
CrazyMax	c74574e6c8	Merge pull request #172 from docker/dependabot/npm_and_yarn/csv-parse-5.3.1 Bump csv-parse from 5.3.0 to 5.3.1	2022-10-17 15:11:27 +02:00
CrazyMax	2d0cf98781	update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-17 15:08:30 +02:00
dependabot[bot]	5f1d4ea81f	Bump csv-parse from 5.3.0 to 5.3.1 Bumps [csv-parse](https://github.com/adaltas/node-csv/tree/HEAD/packages/csv-parse) from 5.3.0 to 5.3.1. - [Release notes](https://github.com/adaltas/node-csv/releases) - [Changelog](https://github.com/adaltas/node-csv/blob/master/packages/csv-parse/CHANGELOG.md) - [Commits](https://github.com/adaltas/node-csv/commits/csv-parse@5.3.1/packages/csv-parse) --- updated-dependencies: - dependency-name: csv-parse dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com>	2022-10-17 04:04:47 +00:00
Tõnis Tiigi	59b5ed6124	Merge pull request #165 from crazy-max/append append nodes to builder support	2022-10-14 11:30:50 -07:00
CrazyMax	bd61d52837	update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-14 11:47:46 +02:00
CrazyMax	f6efb5fcbb	platforms input Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-14 11:47:46 +02:00
CrazyMax	2dfca373f3	append nodes to builder support Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-14 11:46:19 +02:00
CrazyMax	95cb08cb26	Merge pull request #171 from crazy-max/rmsync Fix deprecated fs.rmdir	2022-10-12 12:09:19 +02:00
CrazyMax	eb5c2a6eea	Fix deprecated fs.rmdir Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-12 12:05:06 +02:00
CrazyMax	83612bea36	Merge pull request #170 from crazy-max/setOutput Remove workaround for setOutput	2022-10-12 11:51:02 +02:00
CrazyMax	40fefd8a58	Remove workaround for setOutput Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-12 11:44:21 +02:00
CrazyMax	90a1e4619e	Merge pull request #169 from crazy-max/context-module move args logic to context module and add tests	2022-10-12 11:43:19 +02:00
CrazyMax	5a9fc40575	move args logic to context module and add tests Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-12 11:38:58 +02:00
CrazyMax	6c48dad5f0	Merge pull request #159 from docker/dependabot/npm_and_yarn/uuid-9.0.0 Bump uuid from 8.3.2 to 9.0.0	2022-10-12 11:15:57 +02:00
CrazyMax	16c2ddbfa7	update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-12 11:04:04 +02:00
dependabot[bot]	0fe8589bf4	Bump uuid from 8.3.2 to 9.0.0 Bumps [uuid](https://github.com/uuidjs/uuid) from 8.3.2 to 9.0.0. - [Release notes](https://github.com/uuidjs/uuid/releases) - [Changelog](https://github.com/uuidjs/uuid/blob/main/CHANGELOG.md) - [Commits](https://github.com/uuidjs/uuid/compare/v8.3.2...v9.0.0) --- updated-dependencies: - dependency-name: uuid dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>	2022-10-12 09:03:26 +00:00
CrazyMax	f3692cbe43	Merge pull request #167 from docker/dependabot/npm_and_yarn/actions/core-1.10.0 Bump @actions/core from 1.9.1 to 1.10.0	2022-10-12 10:53:12 +02:00
CrazyMax	51ce2e7281	update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-10-12 10:50:51 +02:00
dependabot[bot]	1759384a3b	Bump @actions/core from 1.9.1 to 1.10.0 Bumps [@actions/core](https://github.com/actions/toolkit/tree/HEAD/packages/core) from 1.9.1 to 1.10.0. - [Release notes](https://github.com/actions/toolkit/releases) - [Changelog](https://github.com/actions/toolkit/blob/main/packages/core/RELEASES.md) - [Commits](https://github.com/actions/toolkit/commits/HEAD/packages/core) --- updated-dependencies: - dependency-name: "@actions/core" dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>	2022-09-30 04:10:30 +00:00
CrazyMax	d5234d6605	Merge pull request #162 from crazy-max/nodes-output nodes metadata JSON ouput	2022-09-22 11:05:09 +02:00
CrazyMax	ec8fe6a2ec	update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-09-22 03:02:22 +02:00
CrazyMax	c6ec880f34	add tests for inspect parsing Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-09-22 03:01:46 +02:00
CrazyMax	69d3837448	return driver opts and buildkit version from nodes metadata Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-09-22 03:01:46 +02:00
CrazyMax	aa0df6f73a	nodes metadata JSON ouput Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-09-22 03:01:45 +02:00
Tõnis Tiigi	f0ad70c1de	Merge pull request #164 from crazy-max/node-auth auth support for tls endpoint	2022-09-21 17:59:10 -07:00
CrazyMax	1a6cf9b6d7	update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-09-22 02:48:42 +02:00
CrazyMax	1c2ad20e10	auth support for tls endpoint Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-09-22 02:48:36 +02:00
Tõnis Tiigi	f5bc16b105	Merge pull request #163 from crazy-max/update-docs update and split docs	2022-09-19 16:18:24 -07:00
CrazyMax	86f43c11f1	update and split docs Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-09-18 02:34:19 +02:00
CrazyMax	f385c9ed95	Merge pull request #161 from crazy-max/fix-remote skip setting buildkitd flags and config for remote driver	2022-09-16 18:35:19 +02:00
CrazyMax	798ed00eea	skip setting buildkitd flags and config for remote driver Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-09-16 18:12:29 +02:00
CrazyMax	bea6a01aa4	Merge pull request #157 from docker/dependabot/npm_and_yarn/actions/core-1.9.1 Bump @actions/core from 1.8.2 to 1.9.1	2022-08-24 13:15:56 +02:00
CrazyMax	3a2cc9a001	Update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-08-24 12:34:51 +02:00
dependabot[bot]	7a18bafc06	Bump @actions/core from 1.8.2 to 1.9.1 Bumps [@actions/core](https://github.com/actions/toolkit/tree/HEAD/packages/core) from 1.8.2 to 1.9.1. - [Release notes](https://github.com/actions/toolkit/releases) - [Changelog](https://github.com/actions/toolkit/blob/main/packages/core/RELEASES.md) - [Commits](https://github.com/actions/toolkit/commits/HEAD/packages/core) --- updated-dependencies: - dependency-name: "@actions/core" dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>	2022-08-09 04:03:44 +00:00
CrazyMax	312f67c662	Merge pull request #149 from docker/dependabot/npm_and_yarn/actions/http-client-2.0.1 Bump @actions/http-client from 1.0.11 to 2.0.1	2022-06-07 12:07:38 +02:00
CrazyMax	b8ba4729df	Update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-06-07 12:05:02 +02:00
dependabot[bot]	afe5b71b31	Bump @actions/http-client from 1.0.11 to 2.0.1 Bumps [@actions/http-client](https://github.com/actions/toolkit/tree/HEAD/packages/http-client) from 1.0.11 to 2.0.1. - [Release notes](https://github.com/actions/toolkit/releases) - [Changelog](https://github.com/actions/toolkit/blob/main/packages/http-client/RELEASES.md) - [Commits](https://github.com/actions/toolkit/commits/HEAD/packages/http-client) --- updated-dependencies: - dependency-name: "@actions/http-client" dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>	2022-06-07 10:00:02 +00:00
CrazyMax	6f5431bef1	Merge pull request #150 from docker/dependabot/npm_and_yarn/actions/tool-cache-2.0.1 Bump @actions/tool-cache from 1.7.2 to 2.0.1	2022-06-07 11:58:06 +02:00
CrazyMax	da30c94fcd	Update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-06-07 11:51:26 +02:00
dependabot[bot]	718cf00a00	Bump @actions/tool-cache from 1.7.2 to 2.0.1 Bumps [@actions/tool-cache](https://github.com/actions/toolkit/tree/HEAD/packages/tool-cache) from 1.7.2 to 2.0.1. - [Release notes](https://github.com/actions/toolkit/releases) - [Changelog](https://github.com/actions/toolkit/blob/main/packages/tool-cache/RELEASES.md) - [Commits](https://github.com/actions/toolkit/commits/HEAD/packages/tool-cache) --- updated-dependencies: - dependency-name: "@actions/tool-cache" dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>	2022-06-07 09:49:41 +00:00
CrazyMax	c4fbfe3f62	Merge pull request #151 from docker/dependabot/npm_and_yarn/actions/core-1.8.2 Bump @actions/core from 1.6.0 to 1.8.2	2022-06-07 11:48:17 +02:00
CrazyMax	449215757a	Update generated content Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-06-07 11:46:00 +02:00
CrazyMax	cafcc1d31f	Merge pull request #152 from rodrigc/readme-clarify-install Clarify install option in example	2022-05-28 11:26:39 +02:00
CrazyMax	7560281ec7	Merge pull request #145 from Firefishy/patch-1 Minor README.md update - use newer action versions	2022-05-28 11:26:08 +02:00
Grant	9102fb725f	Minor README.md update - use newer action versions Signed-off-by: Grant Slater <git@firefishy.com>	2022-05-27 00:52:01 +01:00
Craig Rodrigues	43262924e3	Clarify description for install option "docker build" is actually aliased to "docker build buildx" Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>	2022-05-26 18:23:16 -04:00
Craig Rodrigues	455b065be4	Clarify install option in example Co-authored-by: CrazyMax <github@crazymax.dev> Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>	2022-05-26 17:59:37 -04:00
dependabot[bot]	26f93d2e65	Bump @actions/core from 1.6.0 to 1.8.2 Bumps [@actions/core](https://github.com/actions/toolkit/tree/HEAD/packages/core) from 1.6.0 to 1.8.2. - [Release notes](https://github.com/actions/toolkit/releases) - [Changelog](https://github.com/actions/toolkit/blob/main/packages/core/RELEASES.md) - [Commits](https://github.com/actions/toolkit/commits/HEAD/packages/core) --- updated-dependencies: - dependency-name: "@actions/core" dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>	2022-05-16 04:04:08 +00:00
CrazyMax	91cb32d715	Merge pull request #142 from crazy-max/update-refs Bump all Docker actions to latest major	2022-05-05 19:46:51 +02:00
CrazyMax	7085ac52c5	Bump all Docker actions to latest major Signed-off-by: CrazyMax <crazy-max@users.noreply.github.com>	2022-05-05 19:43:45 +02:00