detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-04-20 02:40:03 +02:00
Code Issues Actions Packages Releases Activity
slsDetectorPackage/RELEASE.txt
Dhanya Thattil 4259363169
rxr sls namespace (#457) 
* rxr src files and classes (detectordata, ZmqSocket) added to sls namespace

* moving defines inside namespace

* moving defines inside namespace, added helpdacs to namespace

* added namespace to gui

* gui also updated

* removed unnecessary sls:: when already in sls namespace for slsDetectoSoftware, receverSoftware, slsDetectorGui and slsSupportlib
2022-05-18 11:48:38 +02:00

229 lines
7.9 KiB
Plaintext
Executable File
Raw Blame History

SLS Detector Package Minor Release 7.0.0 released on 25.11.2021
===============================================================
This document describes the differences between v7.0.0 and v6.x.x
CONTENTS
--------
1. New or Changed Features
2. Resolved Issues
3. Firmware Requirements
4. Kernel Requirements
5. Download, Documentation & Support
1. New or Changed Features
==========================
- Fixed minor warnings (will fix commandline print of excess packets for missing packets)
- ctb slow adcs and any other adcs (other than temp) goes to the control Server
- number of udp interfaces is 2 for Eiger (CHANGE IN API??)
- added module id for virtual servers into the udp header
- refactoring (rxr)
- fixed patsetbit and patsetmask for moench
- changed default vref of adc9257 to 2V for moench (from 1.33V)
- moench and ctb - can set the starting frame number of next acquisition
- mythen server kernel check incompatible (cet timezone)
- rx_arping
- rx_threadsids max is now 9 (breaking api)
- fixed datastream disabling for eiger. Its only available in 10g mode.
- m3 server crash (vthrehsold dac names were not provided)
- allow vtrim to be interpolated for Eiger settings
- m3 setThresholdEnergy and setAllThresholdEnergy was overwriting gaincaps with settings enum
- can set localhost with virtual server with minimum configuration: (hostname localhost, rx_hostname localhost, udp_dstip auto)
- increases the progress according to listened index. (not processed index)
- current frame index points to listened frame index (not processed index)
- when in discard partial frames or empty mode, the frame number doesnt increase by 1, it increases to that number (so its faster)
- file write disabled by default
- eiger 12 bit mode
- start non blocking acquisition at modular level
- connect master commands to api (allow set master for eiger)
--ignore-config command line
- command line argument 'master' mainly for virtual servers (also master/top for real eiger), only one virtual server for eiger, use command lines for master/top
- stop servers also check for errors at startup( in case it was running with an older version)
- hostname cmd failed when connecting to servers in update mode (ctb, moench, jungfrau, eiger)
- missingpackets signed (negative => extra packets)
- framescaught and frameindex now returns a vector for each port
- progress looks at activated or enabled ports, so progress does not stagnate
- (eiger) disable datastreaming also for virtual servers only for 10g
- missing packets also takes care of disabled ports
- added geometry to metadata
- 10g eiger nextframenumber get fixed.
- stop, able to set nextframenumber to a consistent (max + 1) for all modules if different (eiger/ctb/jungfrau/moench)
- ctb: can set names for all the dacs
- fpga/kernel programming, checks if drive is a special file and not a normal file
- gotthard 25 um image reconstructed in gui and virtual hdf5 (firmware updated for slave to reverse channels)
- master binary file in json format now
- fixed bug introduced in 6.0.0: hdf5 files created 1 file per frame after the initial file which had maxframesperfile
- rx_roi
- m3 polarity, interpolation (enables all counters when enabled), pump probe, analog pulsing, digital pulsing
- updatedetectorserver - removes old server current binary pointing to for blackfin
- removing copydetectorserver using tftp
- registerCallBackRawDataReady and registerCallBackRawDataModifyReady now gives a sls_receiver_header* instead of a char*, and uint32_t to size_t
- registerCallBackStartAcquisition gave incorrect imagesize (+120 bytes). corrected.
- registerCallBackStartAcquisition parameter is a const string reference
- m3 (runnig config second time with tengiga 0, dr !=32, counters !=0x7) calculated incorrect image size expected
- fixed row column indexing (mainly for multi module Jungfrau 2 interfaces )
- eiger gui row indices not flipped anymore (fix in config)
- m3 (settings dac check disabled temporarily?)
- m3 virtual server sends the right pacets now
- gap pixels in gui enabled by default
- rxr src files and classes (detectordata, ZmqSocket, helpDacs) added to sls namespace, and macros (namely from logger (logINFO etc)), slsDetectorGui
2. Resolved Issues
==================
3. Firmware Requirements
========================
Eiger
=====
Compatible version : 08.10.2021 (v29)
Jungfrau
========
Compatible version : 31.08.2021 (v1.2, PCB v1.0)
: 08.10.2021 (v2.2, PCB v2.0)
Gotthard
========
Compatible version : 08.02.2018 (50um and 25um Master)
: 09.02.2018 (25 um Slave)
Mythen3
=======
Compatible version : 10.09.2021 (v1.1)
Gotthard2
=========
Compatible version : 27.05.2021 (v0.1)
Moench
======
Compatible version : 05.10.2020 (v1.0)
Ctb
===
Compatible version : 05.10.2020 (v1.0)
Detector Upgrade
================
The following can be upgraded remotely:
Eiger via bit files
Jungfrau via command <.pof>
Mythen3 via command <.rbf>
Gotthard2 via command <.rbf>
Moench via command <.pof>
Ctb via command <.pof>
The following cannot be upgraded remotely:
Gotthard
Instructions available at
https://slsdetectorgroup.github.io/devdoc/firmware.html
and
https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
4. Kernel Requirements
======================
Blackfin
========
Latest version: Fri Oct 29 00:00:00 2021
Older ones will work, but might have issues with programming firmware via
the package.
Nios
====
Compatible version: Mon May 10 18:00:21 CEST 2021
Kernel Upgrade
==============
Eiger via bit files
Others via command
Commands: udpatekernel, kernelversion
Instructions available at
https://slsdetectorgroup.github.io/devdoc/commandline.html
https://slsdetectorgroup.github.io/devdoc/detector.html
https://slsdetectorgroup.github.io/devdoc/pydetector.html
5. Download, Documentation & Support
====================================
Download
--------
The Source Code:
https://github.com/slsdetectorgroup/slsDetectorPackage
Documentation
-------------
Installation:
https://slsdetectorgroup.github.io/devdoc/installation.html#
Firmware Upgrade:
https://slsdetectorgroup.github.io/devdoc/firmware.html
Detector Server upgrade:
https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
Detector Simulators:
https://slsdetectorgroup.github.io/devdoc/virtualserver.html
Consuming slsDetectorPackage:
https://slsdetectorgroup.github.io/devdoc/consuming.html
API Examples:
https://github.com/slsdetectorgroup/api-examples
Command Line Documentation:
https://slsdetectorgroup.github.io/devdoc/commandline.html
Quick Start Guide:
https://slsdetectorgroup.github.io/devdoc/quick_start_guide.html
C++ API Documentation:
https://slsdetectorgroup.github.io/devdoc/detector.html
C++ API Example:
https://slsdetectorgroup.github.io/devdoc/examples.html#
Python API Documentation:
https://slsdetectorgroup.github.io/devdoc/pygettingstarted.html
Python API Example:
https://slsdetectorgroup.github.io/devdoc/pyexamples.html
Receivers (including custom receiver):
https://slsdetectorgroup.github.io/devdoc/receivers.html
https://slsdetectorgroup.github.io/devdoc/slsreceiver.html
TroubleShooting:
https://slsdetectorgroup.github.io/devdoc/troubleshooting.html
Further Documentation:
https://www.psi.ch/en/detectors/documentation
Info on Releases:
https://www.psi.ch/en/detectors/software
Support
-------
dhanya.thattil@psi.ch
erik.frojdh@psi.ch
View Git Blame Copy Permalink