fixed altera pll clk dividers for ctb

.clang-tidy

@@ -1,24 +1,16 @@
 ---
 Checks:          '*, 
-                    -altera-*,
                     -android-cloexec-fopen,
                     -cppcoreguidelines-pro-bounds-array-to-pointer-decay, 
                     -cppcoreguidelines-pro-bounds-pointer-arithmetic, 
                     -fuchsia*,
                     -readability-else-after-return,
                     -readability-avoid-const-params-in-decls,
-                    -readability-identifier-length,
                     -cppcoreguidelines-pro-bounds-constant-array-index,
                     -cppcoreguidelines-pro-type-reinterpret-cast,
                     -llvm-header-guard,
-                    -modernize-use-nodiscard,
-                    -misc-non-private-member-variables-in-classes,
                     -readability-static-accessed-through-instance,
                     -readability-braces-around-statements,
-                    -readability-isolate-declaration,
-                    -readability-implicit-bool-conversion,
-                    -readability-identifier-length,
-                    -readability-identifier-naming,
                     -hicpp-signed-bitwise,
                     -hicpp-no-array-decay, 
                     -hicpp-braces-around-statements,
@@ -26,6 +18,8 @@ Checks:          '*,
                     -google-readability-todo, 
                     -google-readability-braces-around-statements,
                     -modernize-use-trailing-return-type,
+                    -readability-isolate-declaration,
+                    -readability-implicit-bool-conversion,
                     -llvmlibc-*'
 
 HeaderFilterRegex: \.h

.github/workflows/cmake.yaml

@@ -1,47 +0,0 @@
-name: Native CMake Build
-
-on: [push, pull_request]
-
-env:
-  # Customize the CMake build type here (Release, Debug, RelWithDebInfo, etc.)
-  BUILD_TYPE: Debug
-
-jobs:
-  build:
-    # The CMake configure and build commands are platform agnostic and should work equally well on Windows or Mac.
-    # You can convert this to a matrix build if you need cross-platform coverage.
-    # See: https://docs.github.com/en/free-pro-team@latest/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
-    runs-on: ubuntu-latest
-    name: Configure and build using cmake
-    steps:
-      - uses: actions/checkout@v4
-      - uses: actions/setup-python@v5
-        with:
-          python-version: 3.12
-          cache: 'pip'
-      - run: pip install pytest numpy
-
-      - uses: awalsh128/cache-apt-pkgs-action@latest
-        with:
-          packages: libhdf5-dev qtbase5-dev qt5-qmake libqt5svg5-dev libpng-dev libtiff-dev
-          version: 1.0
-
-      - name: Configure CMake
-        # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
-        # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
-        run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DSLS_USE_TESTS=ON -DSLS_USE_HDF5=ON -DSLS_USE_GUI=ON -DSLS_USE_MOENCH=ON -DSLS_USE_PYTHON=ON
-
-      - name: Build
-        # Build your program with the given configuration
-        run: cmake --build ${{github.workspace}}/build -j4 --config ${{env.BUILD_TYPE}}
-
-      - name: C++ unit tests
-        working-directory: ${{github.workspace}}/build
-        run: ctest -C ${{env.BUILD_TYPE}} -j1
-
-      - name: Python unit tests
-        working-directory: ${{github.workspace}}/build/bin
-        run: |
-          python -m pytest ${{github.workspace}}/python/tests
-
-

.github/workflows/conda_library.yaml

@@ -1,42 +0,0 @@
-name: Build slsdetlib
-
-on: [pull_request]
-
-jobs:
-  build:
-    strategy:
-      fail-fast: false
-      matrix:
-        platform: [ubuntu-latest, ] # macos-12, windows-2019]
-        python-version: ["3.12",]
-
-    runs-on: ${{ matrix.platform }}
-
-    # The setup-miniconda action needs this to activate miniconda
-    defaults:
-      run:
-        shell: "bash -l {0}"
-
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Get conda
-        uses: conda-incubator/setup-miniconda@v3.0.4
-        with:
-          python-version: ${{ matrix.python-version }}
-          channels: conda-forge
-
-      - name: Prepare
-        run: conda install conda-build conda-verify pytest anaconda-client
-
-      - name: Disable upload
-        run: conda config --set anaconda_upload no
-
-      - name: Build
-        run: conda build conda-recipes/main-library --output-folder build_output
-
-      - name: Upload all Conda packages
-        uses: actions/upload-artifact@v4
-        with:
-          name: conda-packages
-          path: build_output/**  # Uploads all packages

.github/workflows/conda_python.yaml

@@ -1,42 +0,0 @@
-name: slsdet
-
-on: [pull_request]
-
-jobs:
-  build:
-    strategy:
-      fail-fast: false
-      matrix:
-        platform: [ubuntu-latest, ] # macos-12, windows-2019]
-        python-version: ["3.12",]
-
-    runs-on: ${{ matrix.platform }}
-
-    # The setup-miniconda action needs this to activate miniconda
-    defaults:
-      run:
-        shell: "bash -l {0}"
-
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Get conda
-        uses: conda-incubator/setup-miniconda@v3.0.4
-        with:
-          python-version: ${{ matrix.python-version }}
-          channels: conda-forge
-
-      - name: Prepare
-        run: conda install conda-build conda-verify pytest anaconda-client
-
-      - name: Disable upload
-        run: conda config --set anaconda_upload no
-
-      - name: Build
-        run: conda build conda-recipes/python-client --output-folder build_output 
-
-      - name: Upload all Conda packages
-        uses: actions/upload-artifact@v4
-        with:
-          name: conda-packages
-          path: build_output/**  # Uploads all packages

.gitignore

@@ -9,7 +9,7 @@ bin/
 *.o
 *.so
 .*
-build/
+build
 RELEASE.txt
 Testing/
 

CMakeLists.txt

@@ -1,95 +1,15 @@
 # SPDX-License-Identifier: LGPL-3.0-or-other
 # Copyright (C) 2021 Contributors to the SLS Detector Package
-cmake_minimum_required(VERSION 3.15)
+cmake_minimum_required(VERSION 3.12)
 project(slsDetectorPackage)
-
-# Read VERSION file into project version
-set(VERSION_FILE "${CMAKE_CURRENT_SOURCE_DIR}/VERSION")
-file(READ "${VERSION_FILE}" VERSION_CONTENT)
-string(STRIP "${VERSION_CONTENT}" PROJECT_VERSION_STRING)
-set(PROJECT_VERSION ${PROJECT_VERSION_STRING})
-
-# Pass it to the compiler
-add_compile_definitions(SLS_DET_VERSION="${PROJECT_VERSION}")
+set(PROJECT_VERSION 6.1.1)
 
 set(CMAKE_CXX_FLAGS_RELEASE "-O3 -DNDEBUG")
 
 cmake_policy(SET CMP0074 NEW)
-
-if (${CMAKE_VERSION} VERSION_GREATER "3.24")
-    cmake_policy(SET CMP0135 NEW) #Fetch content download timestamp
-endif()
 include(cmake/project_version.cmake)
 include(cmake/SlsAddFlag.cmake)
-
-
-
-# Using FetchContent to get libzmq
-include(FetchContent)
-option(SLS_FETCH_ZMQ_FROM_GITHUB "Fetch zmq from github" OFF)
-option(SLS_FETCH_PYBIND11_FROM_GITHUB "Fetch pybind11 from github" OFF)
-
-
-
-# Allow FetchContent_Populate to be called with a single argument
-# otherwise deprecated warning is issued
-# Note: From cmake 3.28 we can pass EXCLUDE_FROM_ALL to FetchContent_Declare
-# and avoid direct use of Populate
-if (${CMAKE_VERSION} VERSION_GREATER_EQUAL "3.30")
-    cmake_policy(SET CMP0169 OLD) 
-endif()
-
-# Patch libzmq to set minimum cmake version to 3.15 to avoid warnings
-# with newer cmake versions
-# Patch is applied in the FetchContent_Declare
-set(SLS_LIBZMQ_VERSION "4.3.4")
-
-
-if(SLS_FETCH_ZMQ_FROM_GITHUB)
-    # Opt in to pull down a zmq version from github instead of
-    # using the bundled version
-    FetchContent_Declare(
-        libzmq
-        GIT_REPOSITORY https://github.com/zeromq/libzmq.git
-        GIT_TAG        v${SLS_LIBZMQ_VERSION}
-        PATCH_COMMAND ${CMAKE_COMMAND} -E chdir <SOURCE_DIR> patch -p1 < ${CMAKE_CURRENT_SOURCE_DIR}/libs/libzmq/libzmq_cmake_version.patch
-        UPDATE_DISCONNECTED 1
-    )
-else()
-    # Standard behaviour use libzmq included in this repo (libs/libzmq)
-    FetchContent_Declare(
-        libzmq
-        URL ${CMAKE_CURRENT_SOURCE_DIR}/libs/libzmq/libzmq-${SLS_LIBZMQ_VERSION}.tar.gz
-        URL_HASH MD5=cc20b769ac10afa352e5ed2769bb23b3
-        PATCH_COMMAND ${CMAKE_COMMAND} -E chdir <SOURCE_DIR> patch -p1 < ${CMAKE_CURRENT_SOURCE_DIR}/libs/libzmq/libzmq_cmake_version.patch
-        UPDATE_DISCONNECTED 1
-    )
-endif()
-
-# Disable unwanted options from libzmq
-set(BUILD_TESTS OFF CACHE BOOL "Switch off libzmq test build")
-set(BUILD_SHARED OFF CACHE BOOL "Switch off libzmq shared libs")
-set(WITH_PERF_TOOL OFF CACHE BOOL "")
-set(ENABLE_CPACK OFF CACHE BOOL "")
-set(ENABLE_CLANG OFF CACHE BOOL "")
-set(ENABLE_CURVE OFF CACHE BOOL "")
-set(ENABLE_DRAFTS OFF CACHE BOOL "")
-set(ENABLE_PRECOMPILED OFF CACHE BOOL "")
-set(WITH_DOC OFF CACHE BOOL "")
-set(WITH_DOCS OFF CACHE BOOL "")
-
- 
-
-# Using GetProperties and Populate to be able to exclude zmq
-# from install (not possible with FetchContent_MakeAvailable(libzmq))
-FetchContent_GetProperties(libzmq)
-if(NOT libzmq_POPULATED)
-  FetchContent_Populate(libzmq)
-  add_subdirectory(${libzmq_SOURCE_DIR} ${libzmq_BINARY_DIR} EXCLUDE_FROM_ALL)
-endif()
-
-
-
+include(cmake/SlsFindZeroMQ.cmake)
 include(GNUInstallDirs)
 
 # If conda build, always set lib dir to 'lib'
@@ -135,7 +55,6 @@ option(SLS_BUILD_EXAMPLES "examples" OFF)
 option(SLS_TUNE_LOCAL "tune to local machine" OFF)
 option(SLS_DEVEL_HEADERS "install headers for devel" OFF)
 option(SLS_USE_MOENCH "compile zmq and post processing for Moench" OFF)
-option(SLS_USE_JUNGFRAU "compile post processing for Jungfrau" OFF)
 
 #Convenience option to switch off defaults when building Moench binaries only
 option(SLS_BUILD_ONLY_MOENCH "compile only Moench" OFF)
@@ -149,18 +68,6 @@ if(SLS_BUILD_ONLY_MOENCH)
     set(SLS_USE_MOENCH ON CACHE BOOL "Enable" FORCE)
 endif()
 
-#Convenience option to switch off defaults when building Jungfrau binaries only
-option(SLS_BUILD_ONLY_JUNGFRAU "compile only Jungfrau" OFF)
-if(SLS_BUILD_ONLY_JUNGFRAU)
-    message(STATUS "Build JUNGFRAU binaries only!")
-    set(SLS_BUILD_SHARED_LIBRARIES OFF CACHE BOOL "Disabled for JUNGFRAU_ONLY" FORCE)
-    set(SLS_USE_TEXTCLIENT OFF CACHE BOOL "Disabled for JUNGFRAU_ONLY" FORCE)
-    set(SLS_USE_DETECTOR OFF CACHE BOOL "Disabled for JUNGFRAU_ONLY" FORCE)
-    set(SLS_USE_RECEIVER OFF CACHE BOOL "Disabled for JUNGFRAU_ONLY" FORCE)
-    set(SLS_USE_RECEIVER_BINARIES OFF CACHE BOOL "Disabled for JUNGFRAU_ONLY" FORCE)
-    set(SLS_USE_JUNGFRAU ON CACHE BOOL "Enable" FORCE)
-endif()
-
 
 option(SLS_EXT_BUILD "external build of part of the project" OFF)
 if(SLS_EXT_BUILD)
@@ -176,11 +83,10 @@ endif()
 #Maybe have an option guarding this?
 set(SLS_INTERNAL_RAPIDJSON_DIR ${CMAKE_CURRENT_SOURCE_DIR}/libs/rapidjson)
 
-set(SLS_INTERNAL_QWT_DIR ${CMAKE_CURRENT_SOURCE_DIR}/libs/qwt-6.1.5)
-
 set(ClangFormat_EXCLUDE_PATTERNS    "build/" 
                                     "libs/" 
                                     "slsDetectorCalibration/" 
+                                    "ctbGui/" 
                                     "manual/"
                                     "python/"
                                     "sample/"
@@ -216,7 +122,7 @@ endif()
 # to control options for the libraries
 if(NOT TARGET slsProjectOptions)
     add_library(slsProjectOptions INTERFACE)
-   target_compile_features(slsProjectOptions INTERFACE cxx_std_11)
+    target_compile_features(slsProjectOptions INTERFACE cxx_std_11)
 endif()
 
 if (NOT TARGET slsProjectWarnings)
@@ -264,8 +170,6 @@ if (NOT TARGET slsProjectCSettings)
                                                 -Wredundant-decls
                                                 -Wdouble-promotion
                                                 -Werror=return-type
-                                                -Wno-format-overflow 
-                                                -Wno-format-truncation
                                     )
     sls_disable_c_warning("-Wstringop-truncation")
 endif()
@@ -274,11 +178,10 @@ endif()
 if(SLS_USE_SANITIZER)
     target_compile_options(slsProjectOptions INTERFACE -fsanitize=address,undefined -fno-omit-frame-pointer)
     target_link_libraries(slsProjectOptions INTERFACE -fsanitize=address,undefined)
-    #target_compile_options(slsProjectOptions INTERFACE -fsanitize=thread -fno-omit-frame-pointer)
-    #target_link_libraries(slsProjectOptions INTERFACE -fsanitize=thread)
+    # target_compile_options(slsProjectOptions INTERFACE -fsanitize=thread)
+    # target_link_libraries(slsProjectOptions INTERFACE -fsanitize=thread)
 endif()
 
-
 if(SLS_TUNE_LOCAL)
     target_compile_options(slsProjectOptions INTERFACE -mtune=native -march=native)
 endif()
@@ -297,6 +200,10 @@ set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 set(CMAKE_INSTALL_RPATH $ORIGIN)
 set(CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
 
+
+custom_find_zmq()
+
+
 if (SLS_USE_TESTS)
     enable_testing()
     add_subdirectory(tests)
@@ -316,7 +223,6 @@ if (SLS_USE_RECEIVER)
 endif (SLS_USE_RECEIVER)
 
 if (SLS_USE_GUI)   
-    add_subdirectory(libs/qwt)  
     add_subdirectory(slsDetectorGui)
 endif (SLS_USE_GUI)
 
@@ -329,40 +235,18 @@ if (SLS_USE_INTEGRATION_TESTS)
 endif (SLS_USE_INTEGRATION_TESTS)
 
 if (SLS_USE_PYTHON)
-    find_package (Python 3.8 COMPONENTS Interpreter Development)
-    if(SLS_FETCH_PYBIND11_FROM_GITHUB)
-        FetchContent_Declare(
-            pybind11
-            GIT_REPOSITORY https://github.com/pybind/pybind11
-            GIT_TAG        v2.13.6
-        )
-
-    else()
-    # https://github.com/pybind/pybind11/releases
-        FetchContent_Declare(
-            pybind11
-            URL ${CMAKE_CURRENT_SOURCE_DIR}/libs/pybind11/v2.13.6.tar.gz
-            URL_HASH MD5=a04dead9c83edae6d84e2e343da7feeb
-        )
-    endif()
-    FetchContent_MakeAvailable(pybind11)
-
+    find_package (Python 3.6 COMPONENTS Interpreter Development)
+    add_subdirectory(libs/pybind  ${CMAKE_BINARY_DIR}/bin/)
     add_subdirectory(python)
 endif(SLS_USE_PYTHON)
 
 if (SLS_USE_CTBGUI)
-    add_subdirectory(pyctbgui)
+    add_subdirectory(ctbGui)
 endif(SLS_USE_CTBGUI)
 
-# Workaround for file note being copied to build directory
-# when issuing a python -m build
-# TODO! Proper fix
-if(EXISTS ".clang-tidy")
-    configure_file(.clang-tidy  
-        ${CMAKE_BINARY_DIR}/.clang-tidy  
-    )
-endif()
-
+configure_file( .clang-tidy  
+    ${CMAKE_BINARY_DIR}/.clang-tidy  
+)
 
 if (SLS_BUILD_EXAMPLES)
     add_subdirectory(sample)
@@ -377,13 +261,8 @@ if(SLS_USE_MOENCH)
     add_subdirectory(slsDetectorCalibration/moenchExecutables)
 endif(SLS_USE_MOENCH)
 
-if(SLS_USE_JUNGFRAU)
-    add_subdirectory(slsDetectorCalibration/tiffio)
-    add_subdirectory(slsDetectorCalibration/jungfrauExecutables)
-endif(SLS_USE_JUNGFRAU)
-
 if(SLS_MASTER_PROJECT)
     set(CMAKE_INSTALL_DIR "share/cmake/${PROJECT_NAME}")
     set(PROJECT_LIBRARIES slsSupportShared slsDetectorShared slsReceiverShared)
     include(cmake/package_config.cmake)
-endif()
+endif()

README.md

@@ -1,281 +1,102 @@
-## Dependencies
-Before building from source make sure that you have the [software wiki](https://slsdetectorgroup.github.io/devdoc/dependencies.html) installed. If installing using conda, conda will manage the dependencies. Avoid also installing packages with pip. 
+### Note
 
-## Documentaion
-Detailed documentation including installation can be found in the [software wiki](https://slsdetectorgroup.github.io/devdoc/index.html).
+Please do not update to any xxxx.xx.xx.dev0 tags. They are not releases, but tags for internal usage.
+Use only releases with tags such as x.x.x or x.x.x-rcx.
 
-Different releases can be found on the [official site](https://www.psi.ch/en/lxn/software-releases).
+### Documentation
+##### 5.0.0 - Latest Release
+Detailed documentation on the latest release can be found in the [software wiki](https://slsdetectorgroup.github.io/devdoc/index.html) and on the [official site](https://www.psi.ch/en/detectors/software).
 
-Firmware compatiblity can be found in [firmware page](https://github.com/slsdetectorgroup/slsDetectorFirmware)
-
-## Installation
-
-### 1. Install binaries using conda
-Conda is not only useful to manage python environments but can also
-be used as a user space package manager. Dates in the tag (for eg. 2020.07.23.dev0) 
-are from the developer branch. Please use released tags for stability.
-
-We have three different packages available:
-* **slsdetlib** shared libraries and command line utilities 
-* **slsdetgui** GUI
-* **slsdet** Python bindings
+##### Older Releases
+Documentation is found in the package.
 
+### Binaries
+Binaries for the slsDetectorPackage are available through conda. 
 ```
-#Add channels for dependencies and our library
+#Add conda channels
 conda config --add channels conda-forge
 conda config --add channels slsdetectorgroup
 conda config --set channel_priority strict
 
-#create and activate an environment with our library
-#replace 6.1.1 with the required tag
-conda create -n myenv slsdetlib=6.1.1
-conda activate myenv
+conda install slsdetlib   #only shared lib and command line
+conda install slsdet      #python bindings (includes slsdetlib)
+conda install slsdetgui   #gui (includes qt4)
 
-#ready to use
-sls_detector_get exptime
-etc ...
-```
+#Install specific version
+conda install slsdet=2020.03.02.dev0 #developer version from 3 March 2020
 
 ```
-# List available versions
-# lib and binaries
-conda search slsdetlib
-# python
-conda search slsdet
-# gui
-conda search slsdetgui
+
+### Source code
+One can also obtain the source code from this repository and compile.
 ```
-
-## 2. Build from source
-
-### 2.1 Download Source Code from github
-```
-git clone https://github.com/slsdetectorgroup/slsDetectorPackage.git --branch 7.0.0
-```
-
-> **Note:** For v6.x.x of slsDetectorPackage and older, refer [pybind11 notes on cloning](#Pybind-and-Zeromq).
-
-
-### 2.2 Build from source
-
-
-### Build using CMake
+git clone https://github.com/slsdetectorgroup/slsDetectorPackage.git
 
 ```
-# outside slsDetecorPackage folder
-mkdir build && cd build
+#### Dependencies 
 
-# configure & generate Makefiles using cmake
-# by listing all your options (alternately use ccmake described below)
-# cmake3 for some systems
-cmake ../slsDetectorPackage -DCMAKE_INSTALL_PREFIX=/your/install/path
+Refer [this page](https://slsdetectorgroup.github.io/devdoc/dependencies.html)  for dependencies.
 
-# compiled to the build/bin directory
-make -j12 #or whatever number of cores you are using to build
 
-# install headers and libs in /your/install/path directory
-make install
+#### Compilation 
+
+Compiling can be done in two ways. Either with the convenience script
+cmk.sh or directly with cmake for more control.
+
+**1. Compile using script cmk.sh**<br>
+
+These are mainly aimed at those not familiar with using ccmake and cmake. 
 ```
+    The binaries are generated in slsDetectorPackage/build/bin directory.
 
-Instead of the cmake command, one can use ccmake to get a list of options to configure and generate Makefiles at ease.
+    Usage: ./cmk.sh [-c] [-b] [-p] [e] [t] [r] [g] [s] [u] [i] [m] [n] [-h] [z] [-d <HDF5 directory>] [-l Install directory] [-k <CMake command>] [-j <Number of threads>]
+    -[no option]: only make
+    -c: Clean
+    -b: Builds/Rebuilds CMake files normal mode
+    -p: Builds/Rebuilds Python API
+    -h: Builds/Rebuilds Cmake files with HDF5 package
+    -d: HDF5 Custom Directory
+    -k: CMake command
+    -l: Install directory
+    -t: Build/Rebuilds only text client
+    -r: Build/Rebuilds only receiver
+    -g: Build/Rebuilds only gui
+    -s: Simulator
+    -u: Chip Test Gui
+    -j: Number of threads to compile through
+    -e: Debug mode
+    -i: Builds tests
+    -m: Manuals
+    -n: Manuals without compiling doxygen (only rst)
+    -z: Moench zmq processor
 
+    
+    # get all options
+    ./cmk.sh -?
 
+    # new build  and compile in parallel:
+    ./cmk.sh -bj5
 ```
-# ccmake3 for some systems
-ccmake ..
  
-# choose the options
-# first press [c] - configure (unil you see [g])
-# then press [g] - generate
+**2. Compile without script**<br>
+Use cmake to create out-of-source builds, by creating a build folder parallel to source directory. This would create a debug build with address sanitizers.
+```
+    $ mkdir build
+    $ cd build
+    $ cmake ../slsDetectorPackage  -DCMAKE_BUILD_TYPE=Debug -DSLS_USE_SANITIZER=ON
+    $ make -j12 #or whatever number of threads wanted
 ```
 
-|Example cmake options|Comment|
-|---|---|
-| -DSLS_USE_PYTHON=ON            | Python                                 |   
-| -DPython_FIND_VIRTUALENV=ONLY  | Python from only the conda env         | 
-| -DSLS_USE_GUI=ON               | GUI                                    |
-| -DSLS_USE_HDF5=ON              | HDF5                                   |
-| -DSLS_USE_SIMULATOR=ON         | Simulator                              |
-
-> **Note:** For v7.x.x of slsDetectorPackage and older, refer [zeromq notes for cmake option to hint library location](#Pybind-and-Zeromq).
-
-### Build using in-built cmk.sh script
-
+To install binaries using CMake
 ```
-The binaries are generated in slsDetectorPackage/build/bin directory.
-
-Usage: $0 [-b] [-c] [-d <HDF5 directory>] [-e] [-g] [-h] [-i]
-[-j <Number of threads>] [-k <CMake command>] [-l <Install directory>]
-[-m] [-n] [-p] [-r] [-s] [-t] [-u] [-z]
--[no option]: only make
--b: Builds/Rebuilds CMake files normal mode
--c: Clean
--d: HDF5 Custom Directory
--e: Debug mode
--g: Build/Rebuilds gui
--h: Builds/Rebuilds Cmake files with HDF5 package
--i: Builds tests
--j: Number of threads to compile through
--k: CMake command
--l: Install directory
--m: Manuals
--n: Manuals without compiling doxygen (only rst)
--p: Builds/Rebuilds Python API
--r: Build/Rebuilds only receiver
--s: Simulator
--t: Build/Rebuilds only text client
--u: Chip Test Gui
--z: Moench zmq processor
-
-
-# display all options
-./cmk.sh -?
-
-# new build and compile in parallel (recommended basic option):
-./cmk.sh -cbj5
-
-# new build, python and compile in parallel:
-./cmk.sh -cbpj5
-
-#For rebuilding only certain sections
-./cmk.sh -tg #only text client and gui
-./cmk.sh -r #only receiver
-```
-
-> **Note:** For v7.x.x of slsDetectorPackage and older, refer [zeromq notes for cmk script option to hint library location](#Pybind-and-Zeromq).
-
-### Build on old distributions
-
-If your linux distribution doesn't come with a C++11 compiler (gcc>4.8) then 
-it's possible to install a newer gcc using conda and build the slsDetectorPackage
-using this compiler
-
-```
-#Create an environment with the dependencies
-conda create -n myenv gxx_linux-64 cmake zmq
-conda activate myenv
-
-# outside slsDetecorPackage folder
-mkdir build && cd build
-cmake ../slsDetectorPackage -DCMAKE_PREFIX_PATH=$CONDA_PREFIX
-make -j12
-```
-
-> **Note:** For v7.x.x of slsDetectorPackage and older, refer [zeromq notes for dependencies for conda](#Pybind-and-Zeromq).
-
-
-### Build slsDetectorGui (Qt5)
-
-1. Using pre-built binary on conda
-```
-conda create -n myenv slsdetgui=7.0.0
-conda activate myenv
-```
-
-2. Using system installation on RHEL7
-```
-yum install qt5-qtbase-devel.x86_64
-yum install qt5-qtsvg-devel.x86_64 
-```
-
-3. Using system installation on RHEL8
-```
-yum install qt5-qtbase-devel.x86_64
-yum install qt5-qtsvg-devel.x86_64 
-yum install expat-devel.x86_64
-```
-
-4. Using conda
-```
-#Add channels for dependencies and our library
-conda config --add channels conda-forge
-conda config --add channels slsdetectorgroup
-conda config --set channel_priority strict
-
-# create environment to compile
-# on rhel7
-conda create -n slsgui zeromq gxx_linux-64 gxx_linux-64 mesa-libgl-devel-cos6-x86_64 qt
-# on fedora or newer systems
-conda create -n slsgui zeromq qt
-
-# when using conda compilers, would also need libgl, but no need for it on fedora unless maybe using it with ROOT
-
-# activate environment
-conda activate slsgui
-
-# compile with cmake outside slsDetecorPackage folder
-mkdir build && cd build
-cmake ../slsDetectorPackage -DSLS_USE_GUI=ON
-make -j12
-
-# or compile with cmk.sh
-cd slsDetectorPackage
-./cmk.sh -cbgj9
-```
-
-> **Note:** For v7.x.x of slsDetectorPackage and older, refer [zeromq notes for dependencies for conda](#Pybind-and-Zeromq).
-
-### Build documentation from package
-The documentation for the slsDetectorPackage is build using a combination 
-of Doxygen, Sphinx and Breathe. The easiest way to install the dependencies
-is to use conda 
-
-```
-conda create -n myenv python=3.12 sphinx sphinx_rtd_theme breathe doxygen numpy
-```
-
-```
-# using cmake or ccmake to enable DSLS_BUILD_DOCS
-# outside slsDetecorPackage folder
-mkdir build && cd build
-cmake ../slsDetectorPackage -DSLS_BUILD_DOCS=ON
-
-make docs # generate API docs and build Sphinx RST
-make rst # rst only, saves time in case the API did not change
+    git clone --recursive https://github.com/slsdetectorgroup/slsDetectorPackage.git
+    mkdir build && cd build
+    cmake ../slsDetectorPackage -DCMAKE_INSTALL_PREFIX=/your/install/path
+    make -j12 #or whatever number of cores you are using to build
+    make install
 ```
 
 
-
-## Pybind and Zeromq
-
-### Pybind11 for Python
-**v8.0.0+**:
-pybind11 is built
-* by default from tar file in repo (libs/pybind/v2.1x.0.tar.gz)
-* or use advanced option SLS_FETCH_PYBIND11_FROM_GITHUB [link].
-   * v9.0.0+: pybind11 (v2.13.6)
-   * v8.x.x : pybind11 (v2.11.0)
-
-**v7.x.x**:
-pybind11 packaged into ‘libs/pybind’. No longer a submodule. No need for “recursive” or “submodule update”.
-
-**Older versions**:
-pybind11 is a submodule. Must be cloned using “recursive” and updated when switching between versions using the following commands.
-
-```
-# Note: Only for v6.x.x versions and older
-
-# clone using recursive to get pybind11 submodule
-git clone --recursive https://github.com/slsdetectorgroup/slsDetectorPackage.git
-
-# update submodule when switching between releases
-cd slsDetectorPackage
-git submodule update --init
-```
-
-### Zeromq
-**v8.0.0+**:
-zeromq (v4.3.4) is built
-* by default from tar file in repo (libs/libzmq/libzmq-4.3.4.tar.gz)
-* or use advanced option SLS_FETCH_ZMQ_FROM_GITHUB [link].
-
-**v7.x.x and older**:
-zeromq-devel must be installed and one can hint its location using
-* cmake option:’-DZeroMQ_HINT=/usr/lib64’ or
-* option ‘-q’ in cmk.sh script: : ./cmk.sh -cbj5 -q /usr/lib64
-* ‘zeromq’ dependency added when installing using conda
-
-
-## Support
+### Support
     dhanya.thattil@psi.ch
     erik.frojdh@psi.ch

RELEASE.txt

@@ -1,133 +1,179 @@
-SLS Detector Package Minor Release 9.2.0 released on 02.06.2025
-==================================================================
+SLS Detector Package Minor Release 7.0.0 released on 25.11.2021
+===============================================================
 
-This document describes the differences between v9.2.0 and v9.1.1
+This document describes the differences between v7.0.0 and v6.x.x   
 
 
 
     CONTENTS
     --------
-    1           New or Changed Features
-    2           On-board Detector Server Compatibility
-    3           Firmware Requirements
-    4           Kernel Requirements
-    5           Download, Documentation & Support
+    1.  New or Changed Features
+    2.  Resolved Issues
+    3.  Firmware Requirements
+    4.  Kernel Requirements
+    5.  Download, Documentation & Support
 
 
 
 
-1 New or Changed Features
-=========================
+1. New or Changed Features
+==========================
 
+- Fixed minor warnings (will fix commandline print of excess packets for missing packets)
+- ctb slow adcs and any other adcs (other than temp) goes to the control Server
+- number of udp interfaces is 2 for Eiger (CHANGE IN API??)
+- added module id for virtual servers into the udp header
+- refactoring (rxr)
+- fixed patsetbit and patsetmask for moench
+- changed default vref of adc9257 to 2V for moench (from 1.33V)
+- moench and ctb - can set the starting frame number of next acquisition
+- mythen server kernel check incompatible (cet timezone)
+- rx_arping
+- rx_threadsids max is now 9 (breaking api)
+- fixed datastream disabling for eiger. Its only available in 10g mode.
+- m3 server crash (vthrehsold dac names were not provided)
+- allow vtrim to be interpolated for Eiger settings
+- m3 setThresholdEnergy and setAllThresholdEnergy was overwriting gaincaps with settings enum
+- can set localhost with virtual server with minimum configuration: (hostname localhost, rx_hostname localhost, udp_dstip auto)
+- increases the progress according to listened index. (not processed index)
+- current frame index points to listened frame index (not processed index)
+- when in discard partial frames or empty mode, the frame number doesnt increase by 1, it increases to that number (so its faster)
+- file write disabled by default
+- eiger 12 bit mode
+- start non blocking acquisition at modular level
+- connect master commands to api (allow set master for eiger)
+--ignore-config command line
+- command line argument 'master' mainly for virtual servers (also master/top for real eiger), only one virtual server for eiger, use command lines for master/top
+- stop servers also check for errors at startup( in case it was running with an older version)
+- hostname cmd failed when connecting to servers in update mode (ctb, moench, jungfrau, eiger)
+- missingpackets signed (negative => extra packets)
+- framescaught and frameindex now returns a vector for each port
+- progress looks at activated or enabled ports, so progress does not stagnate
+- (eiger) disable datastreaming also for virtual servers only for 10g
+- missing packets also takes care of disabled ports
+- added geometry to metadata
+- 10g eiger nextframenumber get fixed.
+- stop, able to set nextframenumber to a consistent (max + 1) for all modules if different (eiger/ctb/jungfrau/moench)
+- ctb: can set names for all the dacs
+- fpga/kernel programming, checks if drive is a special file and not a normal file
+- gotthard 25 um image reconstructed in gui and virtual hdf5 (firmware updated for slave to reverse channels)
+- master binary file in json format now
+- fixed bug introduced in 6.0.0: hdf5 files created 1 file per frame after the initial file which had maxframesperfile
+- rx_roi
+- m3 polarity, interpolation (enables all counters when enabled), pump probe, analog pulsing, digital pulsing
+- updatedetectorserver - removes old server current binary pointing to for blackfin
+- removing copydetectorserver using tftp 
+- registerCallBackRawDataReady and registerCallBackRawDataModifyReady now gives a sls_receiver_header* instead of a char*, and uint32_t to size_t
+- registerCallBackStartAcquisition gave incorrect imagesize (+120 bytes). corrected.
+- registerCallBackStartAcquisition parameter is a const string reference
+- m3 (runnig config second time with tengiga 0, dr !=32, counters !=0x7) calculated incorrect image size expected
+- fixed row column indexing (mainly for multi module Jungfrau 2 interfaces )
+- eiger gui row indices not flipped anymore (fix in config)
+- m3 (settings dac check disabled temporarily?)
+- m3 virtual server sends the right pacets now
+- gap pixels in gui enabled by default
+- rxr src files and classes (detectordata, ZmqSocket, helpDacs) added to sls namespace, and macros (namely from logger (logINFO etc)), slsDetectorGui (make_unique in implemtnation requires sls nemspace (points to std otherwise) but not deectorImpl.cpp)
+- blackfin programing made seamless (nCE fixed which helps)
+-save settings file for m3 and eiger
+- m3 threshold changes
+- g2 and m3 clkdiv 2 (system clock) change should affect time settings (g2: exptime, period, delayaftertrigger, burstperiod, m3: exptime, gatedelay, gateperiod, period, delayaftertrigger)
+- g2 system frequency is the same irrespective of timing source
+- (apparently) rxr doesnt get stuck anymore from 6.1.1
+- rxr mem size changed (fifo header size from 8 to 16) due to sls rxr header = 112.. 112+ 16=128 (reduces packet losss especially for g2)
+-udp_srcip and udp_Srcip2: can set to auto (for virtual or 1g data networks)
+- set dataset name for all hdf5 files to "data" only
+- number of storage cells is not updated in teh receiver. done. and also allowing it to be modified in running status
+- refactored memory structure in receiver and listener code (maybe resolves stuck issue, need to check)
+- callback modified to have rx header and not rx header pointer
+- adapted for g2 hdi v2.0. able to set master from server command line, server config file, and client.
+- rx udp socket refactored (maybe resolves getting stuck?)remove check for eiger header and isntead checks for malformed packets for every detector
+- jungfrau sw trigger , blocking trigger
+-help should not create a new object
+- jungfrau master
+- g2 parallel command
+- jungfrau sync
+- m3 bad channels (badchannel file also for g2 extended to include commas and colons, remove duplicates)
+- m3 fix for gain caps to invert where needed when loading from trimbit file (fix for feature might have been added only in developer branch)
+- pat loop and wait address default
+- ctb and moench Fw fixed (to work with pattern commdand) )addreess length
+- setting rx_hostname (or udp_dstip with rx_hostname not none) will always set udp_dstmac. solves problem of chaing udp_dstip and udp_dstmac stays the same
+- jungfrau reset core and usleep removed (fix for 6.1.1 is now fixed in firmware)
+- g2 change clkdivs 2 3 4 to defaults for burst and cw mode.
+- ctb and moench: allowing 1g non blocking acquire to send data
 
-    Python
-    ------
+2. Resolved Issues
+==================
+    - Reading back sub-microsecond exposure times from the Python API. 
 
-
-    *   Python module is now built using scikit-build-core
+3. Firmware Requirements
+========================
+        
+    Eiger
+    =====  
+    Compatible version : 08.10.2021 (v29)
     
+    Jungfrau
+    ========       
+    Compatible version : 31.08.2021 (v1.2, PCB v1.0) 
+                       : 08.10.2021 (v2.2, PCB v2.0)
 
-    *   slsdet is available on PyPI from this release onwards
+    Gotthard
+    ========   
+    Compatible version : 08.02.2018 (50um and 25um Master)
+                       : 09.02.2018 (25 um Slave) 
 
+    Mythen3
+    =======
+    Compatible version : 10.09.2021 (v1.1)
 
-    *   Updated documentation on python module installation
+    Gotthard2
+    =========
+    Compatible version : 27.05.2021 (v0.1)
 
+    Moench
+    ======
+    Compatible version : 05.10.2020 (v1.0)
 
+    Ctb
+    ===
+    Compatible version : 05.10.2020 (v1.0)
 
-2  On-board Detector Server Compatibility
-==========================================
+    Detector Upgrade
+    ================
+    The following can be upgraded remotely:
+    Eiger      via bit files
+    Jungfrau   via command <.pof>
+    Mythen3    via command <.rbf>
+    Gotthard2  via command <.rbf> 
+    Moench     via command <.pof>
+    Ctb        via command <.pof>
 
-
-    Eiger       9.0.0
-    Jungfrau    9.1.0
-    Mythen3     9.1.1
-    Gotthard2   9.0.0
-    Gotthard    9.0.0
-    Moench      9.0.0
-  
-
-    On-board Detector Server Upgrade
-    --------------------------------
-
-    From v6.1.0 (without tftp):
-        update only on-board detector server
-            Using command 'updatedetectorserver'
-
-
-        udpate both on-board detector server and firmware simultaneously
-            Using command 'update'
+    The following cannot be upgraded remotely:
+    Gotthard   
 
     Instructions available at
+        https://slsdetectorgroup.github.io/devdoc/firmware.html
+    and
         https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
 
 
 
-
-3 Firmware Requirements
-========================
-
-
-    Eiger       02.10.2023 (v32)                    (updated in 7.0.3)
-    
-    Jungfrau    09.02.2025 (v1.6, HW v1.0)          (updated in 9.1.0)
-                08.02.2025 (v2.6, HW v2.0)          (updated in 9.1.0)
-
-    Mythen3     13.11.2024 (v2.0)                   (updated in 9.0.0)
-
-    Gotthard2   03.10.2024 (v1.0)                   (updated in 9.0.0)
-
-    Moench      26.10.2023 (v2.0)                   (updated in 8.0.2)
-
-    Gotthard    08.02.2018 (50um and 25um Master)
-                09.02.2018 (25 um Slave) 
-
-
-    Detector Upgrade
-    ----------------
-
-    The following can be upgraded remotely:
-
-    Eiger      via bit files
-    Jungfrau   via command <.pof>
-    Mythen3    via command <.rbf>
-    Gotthard2  via command <.rbf>
-    Moench     via command <.pof>
-
-    Gotthard cannot be upgraded remotely  
-
-    Except Eiger, 
-        upgrade 
-            Using command 'programfpga' or
-
-        udpate both on-board detector server and firmware simultaneously
-            Using command 'update'
-
-
-    Instructions available at
-        https://slsdetectorgroup.github.io/devdoc/firmware.html
-
-
-
-
-4 Kernel Requirements
+4. Kernel Requirements
 ======================
 
-
     Blackfin 
-    --------
+    ========
     Latest version: Fri Oct 29 00:00:00 2021
     
     Older ones will work, but might have issues with programming firmware via
     the package.
 
-
     Nios
-    -----
+    ====
     Compatible version: Mon May 10 18:00:21 CEST 2021
 
-
     Kernel Upgrade
-    ---------------
+    ==============
     Eiger   via bit files
     Others  via command
 
@@ -139,8 +185,7 @@ This document describes the differences between v9.2.0 and v9.1.1
 
 
 
-
-5 Download, Documentation & Support
+5. Download, Documentation & Support
 ====================================
 
     Download
@@ -153,10 +198,7 @@ This document describes the differences between v9.2.0 and v9.1.1
     -------------
     
     Installation:
-        https://slsdetectorgroup.github.io/devdoc/installation.html
-
-    Quick Start Guide:
-        https://slsdetectorgroup.github.io/devdoc/quick_start_guide.html
+        https://slsdetectorgroup.github.io/devdoc/installation.html#
         
     Firmware Upgrade:
         https://slsdetectorgroup.github.io/devdoc/firmware.html
@@ -176,6 +218,9 @@ This document describes the differences between v9.2.0 and v9.1.1
     Command Line Documentation:
         https://slsdetectorgroup.github.io/devdoc/commandline.html
 
+    Quick Start Guide:
+        https://slsdetectorgroup.github.io/devdoc/quick_start_guide.html
+        
     C++ API Documentation:
         https://slsdetectorgroup.github.io/devdoc/detector.html
        
@@ -192,16 +237,8 @@ This document describes the differences between v9.2.0 and v9.1.1
         https://slsdetectorgroup.github.io/devdoc/receivers.html
         https://slsdetectorgroup.github.io/devdoc/slsreceiver.html
 
-    Detector UDP Header:
-        https://slsdetectorgroup.github.io/devdoc/udpheader.html
-        https://slsdetectorgroup.github.io/devdoc/udpdetspec.html
-
-    slsReceiver Zmq Format:
-        https://slsdetectorgroup.github.io/devdoc/slsreceiver.html#zmq-json-header-format
-
     TroubleShooting:
         https://slsdetectorgroup.github.io/devdoc/troubleshooting.html
-        https://slsdetectorgroup.github.io/devdoc/troubleshooting.html#receiver-pc-tuning-options
         
     Further Documentation:
         https://www.psi.ch/en/detectors/documentation
@@ -215,4 +252,4 @@ This document describes the differences between v9.2.0 and v9.1.1
 
         dhanya.thattil@psi.ch
         erik.frojdh@psi.ch
-        alice.mazzoleni@psi.ch
+

VERSION

@@ -1 +0,0 @@
-9.2.0

bash_autocomplete.sh

@@ -1 +0,0 @@
-slsDetectorSoftware/generator/autocomplete/bash_autocomplete.sh

cmake/FindQwt.cmake

@@ -0,0 +1,118 @@
+# Qt Widgets for Technical Applications
+# available at http://www.http://qwt.sourceforge.net/
+#
+# The module defines the following variables:
+#  QWT_FOUND - the system has Qwt
+#  QWT_INCLUDE_DIR - where to find qwt_plot.h
+#  QWT_INCLUDE_DIRS - qwt includes
+#  QWT_LIBRARY - where to find the Qwt library
+#  QWT_LIBRARIES - aditional libraries
+#  QWT_MAJOR_VERSION - major version
+#  QWT_MINOR_VERSION - minor version
+#  QWT_PATCH_VERSION - patch version
+#  QWT_VERSION_STRING - version (ex. 5.2.1)
+#  QWT_ROOT_DIR - root dir (ex. /usr/local)
+
+#=============================================================================
+# Copyright 2010-2013, Julien Schueller
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met: 
+# 
+# 1. Redistributions of source code must retain the above copyright notice, this
+#    list of conditions and the following disclaimer. 
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution. 
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# The views and conclusions contained in the software and documentation are those
+# of the authors and should not be interpreted as representing official policies, 
+# either expressed or implied, of the FreeBSD Project.
+#=============================================================================
+
+
+find_path ( QWT_INCLUDE_DIR
+  NAMES qwt_plot.h
+  HINTS $ENV{QWTDIR} $ENV{QWTDIR}/src ${QT_INCLUDE_DIR}
+  PATH_SUFFIXES qwt qwt-qt3 qwt-qt4 qwt-qt5
+)
+
+set ( QWT_INCLUDE_DIRS ${QWT_INCLUDE_DIR} )
+
+# version
+set ( _VERSION_FILE ${QWT_INCLUDE_DIR}/qwt_global.h )
+if ( EXISTS ${_VERSION_FILE} )
+  file ( STRINGS ${_VERSION_FILE} _VERSION_LINE REGEX "define[ ]+QWT_VERSION_STR" )
+  if ( _VERSION_LINE )
+    string ( REGEX REPLACE ".*define[ ]+QWT_VERSION_STR[ ]+\"(.*)\".*" "\\1" QWT_VERSION_STRING "${_VERSION_LINE}" )
+    string ( REGEX REPLACE "([0-9]+)\\.([0-9]+)\\.([0-9]+)" "\\1" QWT_MAJOR_VERSION "${QWT_VERSION_STRING}" )
+    string ( REGEX REPLACE "([0-9]+)\\.([0-9]+)\\.([0-9]+)" "\\2" QWT_MINOR_VERSION "${QWT_VERSION_STRING}" )
+    string ( REGEX REPLACE "([0-9]+)\\.([0-9]+)\\.([0-9]+)" "\\3" QWT_PATCH_VERSION "${QWT_VERSION_STRING}" )
+  endif ()
+endif ()
+
+
+# check version
+set ( _QWT_VERSION_MATCH TRUE )
+if ( Qwt_FIND_VERSION AND QWT_VERSION_STRING )
+  if ( Qwt_FIND_VERSION_EXACT )
+    if ( NOT Qwt_FIND_VERSION VERSION_EQUAL QWT_VERSION_STRING )
+      set ( _QWT_VERSION_MATCH FALSE )
+    endif ()
+  else ()
+    if ( QWT_VERSION_STRING VERSION_LESS Qwt_FIND_VERSION )
+      set ( _QWT_VERSION_MATCH FALSE )
+    endif ()
+  endif ()
+endif ()
+
+
+find_library ( QWT_LIBRARY
+  NAMES qwt qwt-qt3 qwt-qt4 qwt-qt5
+  HINTS $ENV{QWTDIR}/lib ${QT_LIBRARY_DIR}
+)
+
+set ( QWT_LIBRARIES ${QWT_LIBRARY} )
+
+
+# try to guess root dir from include dir
+if ( QWT_INCLUDE_DIR )
+  string ( REGEX REPLACE "(.*)/include.*" "\\1" QWT_ROOT_DIR ${QWT_INCLUDE_DIR} )
+# try to guess root dir from library dir
+elseif ( QWT_LIBRARY )
+  string ( REGEX REPLACE "(.*)/lib[/|32|64].*" "\\1" QWT_ROOT_DIR ${QWT_LIBRARY} )
+endif ()
+
+
+# handle the QUIETLY and REQUIRED arguments
+include ( FindPackageHandleStandardArgs )
+if ( CMAKE_VERSION LESS 2.8.3 )
+  find_package_handle_standard_args( Qwt DEFAULT_MSG QWT_LIBRARY QWT_INCLUDE_DIR _QWT_VERSION_MATCH )
+else ()
+  find_package_handle_standard_args( Qwt REQUIRED_VARS QWT_LIBRARY QWT_INCLUDE_DIR _QWT_VERSION_MATCH VERSION_VAR QWT_VERSION_STRING )
+endif ()
+
+
+mark_as_advanced (
+  QWT_LIBRARY 
+  QWT_LIBRARIES
+  QWT_INCLUDE_DIR
+  QWT_INCLUDE_DIRS
+  QWT_MAJOR_VERSION
+  QWT_MINOR_VERSION
+  QWT_PATCH_VERSION
+  QWT_VERSION_STRING
+  QWT_ROOT_DIR
+)

cmake/SlsFindZeroMQ.cmake

@@ -0,0 +1,38 @@
+function(custom_find_zmq)
+    set(ZeroMQ_HINT "" CACHE STRING "Hint where ZeroMQ could be found")
+    #Adapted from: https://github.com/zeromq/cppzmq/
+    if (NOT TARGET libzmq)
+        if(ZeroMQ_HINT)
+            message(STATUS "Looking for ZeroMQ in: ${ZeroMQ_HINT}")
+            find_package(ZeroMQ 4 
+                NO_DEFAULT_PATH
+                HINTS ${ZeroMQ_HINT}
+            )
+        else()
+            find_package(ZeroMQ 4 QUIET)
+        endif()
+        
+    # libzmq autotools install: fallback to pkg-config
+    if(ZeroMQ_FOUND)
+        message(STATUS "Found libzmq using find_package")
+    else()
+        message(STATUS "CMake libzmq package not found, trying again with pkg-config (normal install of zeromq)")
+        list (APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_LIST_DIR}/cmake/libzmq-pkg-config)
+        find_package(ZeroMQ 4 REQUIRED)
+    endif()
+
+    # TODO "REQUIRED" above should already cause a fatal failure if not found, but this doesn't seem to work
+    if(NOT ZeroMQ_FOUND)
+        message(FATAL_ERROR "ZeroMQ was not found, neither as a CMake package nor via pkg-config")
+    endif()
+
+    if (ZeroMQ_FOUND AND NOT TARGET libzmq)
+        message(FATAL_ERROR "ZeroMQ version not supported!")
+    endif()
+    endif()
+
+    get_target_property(VAR libzmq IMPORTED_LOCATION)
+    message(STATUS "Using libzmq: ${VAR}")
+
+
+endfunction()

cmake/libzmq-pkg-config/FindZeroMQ.cmake

@@ -0,0 +1,36 @@
+#From: https://github.com/zeromq/cppzmq/
+set(PKG_CONFIG_USE_CMAKE_PREFIX_PATH ON)
+find_package(PkgConfig)
+pkg_check_modules(PC_LIBZMQ QUIET libzmq)
+
+set(ZeroMQ_VERSION ${PC_LIBZMQ_VERSION})
+
+find_path(ZeroMQ_INCLUDE_DIR zmq.h
+        PATHS ${ZeroMQ_DIR}/include
+        ${PC_LIBZMQ_INCLUDE_DIRS}
+)
+
+find_library(ZeroMQ_LIBRARY
+        NAMES zmq
+        PATHS ${ZeroMQ_DIR}/lib
+        ${PC_LIBZMQ_LIBDIR}
+        ${PC_LIBZMQ_LIBRARY_DIRS}
+)
+
+if(ZeroMQ_LIBRARY OR ZeroMQ_STATIC_LIBRARY)
+    set(ZeroMQ_FOUND ON)
+    message(STATUS "Found libzmq using PkgConfig")
+endif()
+
+set ( ZeroMQ_LIBRARIES ${ZeroMQ_LIBRARY} )
+set ( ZeroMQ_INCLUDE_DIRS ${ZeroMQ_INCLUDE_DIR} )
+
+if (NOT TARGET libzmq)
+    add_library(libzmq UNKNOWN IMPORTED)
+    set_target_properties(libzmq PROPERTIES
+            IMPORTED_LOCATION ${ZeroMQ_LIBRARIES}
+            INTERFACE_INCLUDE_DIRECTORIES ${ZeroMQ_INCLUDE_DIRS})
+endif()
+
+include ( FindPackageHandleStandardArgs )
+find_package_handle_standard_args ( ZeroMQ DEFAULT_MSG ZeroMQ_LIBRARIES ZeroMQ_INCLUDE_DIRS )

cmake/package_config.cmake

@@ -25,6 +25,11 @@ install(FILES
   DESTINATION ${CMAKE_INSTALL_DIR}
 )
 
+install(FILES
+  "${CMAKE_SOURCE_DIR}/cmake/libzmq-pkg-config/FindZeroMQ.cmake"
+  COMPONENT devel
+  DESTINATION ${CMAKE_INSTALL_DIR}/libzmq-pkg-config
+)
 
 if (PROJECT_LIBRARIES OR PROJECT_STATIC_LIBRARIES)
   install(

cmake/project-config.cmake.in

@@ -13,6 +13,17 @@ include(CMakeFindDependencyMacro)
 set(SLS_USE_HDF5 "@SLS_USE_HDF5@")
 
 
+find_package(ZeroMQ 4 QUIET)
+# libzmq autotools install: fallback to pkg-config
+if(NOT ZeroMQ_FOUND)
+    list (APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_LIST_DIR}/libzmq-pkg-config)
+    find_package(ZeroMQ 4 REQUIRED)
+endif()
+
+if(NOT ZeroMQ_FOUND)
+    message(FATAL_ERROR "ZeroMQ was NOT found!")
+endif()
+
 find_dependency(Threads)
 
 # Add optional dependencies here

cmk.sh

@@ -18,6 +18,7 @@ CTBGUI=0
 MANUALS=0
 MANUALS_ONLY_RST=0
 MOENCHZMQ=0
+ZMQ_HINT_DIR=""
 
 
 CLEAN=0
@@ -26,13 +27,13 @@ CMAKE_PRE=""
 CMAKE_POST=""
 
 usage() { echo -e "
-Usage: $0 [-b] [-c] [-d <HDF5 directory>] [-e] [-g] [-h] [-i] [-j <Number of threads>] [-k <CMake command>] [-l <Install directory>] [-m] [-n] [-p] [-r] [-s] [-t] [-u] [-z]  
+Usage: $0 [-b] [-c] [-d <HDF5 directory>] [e] [g] [-h] [i] [-j <Number of threads>] [-k <CMake command>] [-l <Install directory>] [m] [n] [-p] [-q <Zmq hint directory>] [r] [s] [t] [u] [z]  
  -[no option]: only make
  -b: Builds/Rebuilds CMake files normal mode
  -c: Clean
  -d: HDF5 Custom Directory
  -e: Debug mode
- -g: Build/Rebuilds gui
+ -g: Build/Rebuilds only gui
  -h: Builds/Rebuilds Cmake files with HDF5 package
  -i: Builds tests
  -j: Number of threads to compile through
@@ -41,6 +42,7 @@ Usage: $0 [-b] [-c] [-d <HDF5 directory>] [-e] [-g] [-h] [-i] [-j <Number of thr
  -m: Manuals
  -n: Manuals without compiling doxygen (only rst)
  -p: Builds/Rebuilds Python API
+ -q: Zmq hint directory
  -r: Build/Rebuilds only receiver
  -s: Simulator
  -t: Build/Rebuilds only text client
@@ -138,6 +140,10 @@ while getopts ":bcd:eghij:k:l:mnpq:rstuz" opt ; do
 		PYTHON=1
 		REBUILD=1
 		;;   
+	q) 
+		echo "Zmq hint directory: $OPTARG" 
+		ZMQ_HINT_DIR=$OPTARG
+		;;
 	r) 
 		echo "Compiling Options: Receiver" 
 		RECEIVER=1
@@ -254,6 +260,13 @@ if [ $TESTS -eq 1 ]; then
 	echo "Tests Option enabled"
 fi 
 
+#zmq hint dir
+if [ -n "$ZMQ_HINT_DIR" ]; then
+	CMAKE_POST+=" -DZeroMQ_HINT="$ZMQ_HINT_DIR
+	CMAKE_POST+=" -DZeroMQ_DIR="
+#	echo "Enabling Zmq Hint Directory: $ZMQ_HINT_DIR"
+fi 
+
 #hdf5 rebuild
 if [ $HDF5 -eq 1 ]; then
 #	CMAKE_PRE+="HDF5_ROOT="$HDF5DIR

conda-recepie/build.sh

@@ -1,14 +1,10 @@
 # SPDX-License-Identifier: LGPL-3.0-or-other
 # Copyright (C) 2021 Contributors to the SLS Detector Package
 
-if [ ! -d "build" ]; then
-    mkdir build
-fi
-if [ ! -d "install" ]; then
-    mkdir install
-fi
+mkdir build
+mkdir install
 cd build
-cmake .. -G Ninja \
+cmake .. \
       -DCMAKE_PREFIX_PATH=$CONDA_PREFIX \
       -DCMAKE_INSTALL_PREFIX=install \
       -DSLS_USE_TEXTCLIENT=ON \
@@ -18,11 +14,11 @@ cmake .. -G Ninja \
       -DSLS_USE_TESTS=ON \
       -DSLS_USE_PYTHON=OFF \
       -DCMAKE_BUILD_TYPE=Release \
-      -DSLS_USE_HDF5=OFF \
+      -DSLS_USE_HDF5=OFF\
      
 NCORES=$(getconf _NPROCESSORS_ONLN)
 echo "Building using: ${NCORES} cores"
 cmake --build . -- -j${NCORES}
 cmake --build . --target install
 
-CTEST_OUTPUT_ON_FAILURE=1 ctest -j 1
+CTEST_OUTPUT_ON_FAILURE=1 ctest -j 2

conda-recepie/build_pylib.sh

@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: LGPL-3.0-or-other
+# Copyright (C) 2021 Contributors to the SLS Detector Package
+
+echo "|<-------- starting python build"
+cd python
+${PYTHON} setup.py install

conda-recepie/conda_build_config.yaml

@@ -0,0 +1,9 @@
+python:
+    - 3.6
+    - 3.7
+    - 3.8
+    - 3.9
+    - 3.10
+    
+numpy: 
+    - 1.17

conda-recepie/copy_ctbgui.sh

@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: LGPL-3.0-or-other
+# Copyright (C) 2021 Contributors to the SLS Detector Package
+mkdir $PREFIX/lib
+mkdir $PREFIX/bin
+mkdir $PREFIX/include
+
+
+
+cp build/bin/ctbGui $PREFIX/bin/.
+cp build/bin/libctbRootLib.so $PREFIX/lib/.
+

conda-recepie/copy_lib.sh

@@ -4,20 +4,18 @@
 mkdir -p $PREFIX/lib
 mkdir -p $PREFIX/bin
 mkdir -p $PREFIX/include/sls
+# mkdir $PREFIX/include/slsDetectorPackage
 
 #Shared and static libraries
 cp build/install/lib/* $PREFIX/lib/
 
 #Binaries
 cp build/install/bin/sls_detector_acquire $PREFIX/bin/.
-cp build/install/bin/sls_detector_acquire_zmq $PREFIX/bin/.
 cp build/install/bin/sls_detector_get $PREFIX/bin/.
 cp build/install/bin/sls_detector_put $PREFIX/bin/.
 cp build/install/bin/sls_detector_help $PREFIX/bin/.
-cp build/install/bin/sls_detector $PREFIX/bin/.
 cp build/install/bin/slsReceiver $PREFIX/bin/.
 cp build/install/bin/slsMultiReceiver $PREFIX/bin/.
-cp build/install/bin/slsFrameSynchronizer $PREFIX/bin/.
 
 
 cp build/install/include/sls/* $PREFIX/include/sls

conda-recepie/meta.yaml

@@ -0,0 +1,134 @@
+
+package:
+  name: sls_detector_software
+  version: {{ environ.get('GIT_DESCRIBE_TAG', '') }}
+
+source:
+  - path: ..
+
+build:
+  number: 0
+  binary_relocation: True
+  rpaths:
+    - lib/
+
+requirements:
+  build:
+    - {{ compiler('c') }}
+    - {{compiler('cxx')}}
+    - cmake
+    - qwt 6.*
+    - qt 4.8.*
+    - zeromq
+    - xorg-libx11
+    - xorg-libice
+    - xorg-libxext
+    - xorg-libsm
+    - xorg-libxau
+    - xorg-libxrender
+    - xorg-libxfixes
+    - {{ cdt('mesa-libgl-devel') }}      # [linux]
+    - {{ cdt('mesa-libegl-devel') }}     # [linux]
+    - {{ cdt('mesa-dri-drivers') }}      # [linux]
+    - {{ cdt('libselinux') }}            # [linux]
+    - {{ cdt('libxdamage') }}            # [linux]
+    - {{ cdt('libxxf86vm') }}            # [linux]
+    - expat
+
+  host:
+    - libstdcxx-ng
+    - libgcc-ng
+    - zeromq
+    - xorg-libx11
+    - xorg-libice
+    - xorg-libxext
+    - xorg-libsm
+    - xorg-libxau
+    - xorg-libxrender
+    - xorg-libxfixes
+    - expat
+
+  run:
+    - zeromq
+    - libstdcxx-ng
+    - libgcc-ng 
+
+
+outputs:
+  - name: slsdetlib
+    script: copy_lib.sh
+
+    requirements:
+      build:
+        - {{ compiler('c') }}
+        - {{compiler('cxx')}}
+        - libstdcxx-ng
+        - libgcc-ng
+        - zeromq
+
+      host:
+        - zeromq
+
+      run: 
+        - libstdcxx-ng
+        - libgcc-ng
+        - zeromq
+
+  - name: slsdet
+
+    script: build_pylib.sh
+
+    requirements:
+      build:
+        - python
+        - {{ compiler('c') }}
+        - {{compiler('cxx')}}
+        - {{ pin_subpackage('slsdetlib', exact=True) }}
+        - setuptools
+
+      host:
+        - python
+        - {{ pin_subpackage('slsdetlib', exact=True) }}
+
+
+      run:
+        - libstdcxx-ng
+        - libgcc-ng
+        - python
+        - numpy
+        - {{ pin_subpackage('slsdetlib', exact=True) }}
+
+
+    test:
+      imports:
+        - slsdet
+
+  - name: slsdetgui
+    script: copy_gui.sh
+    requirements:
+
+      build:
+        - {{ compiler('c') }}
+        - {{compiler('cxx')}}
+        - {{ pin_subpackage('slsdetlib', exact=True) }}
+        - qwt 6.*
+
+      run:
+        - {{ pin_subpackage('slsdetlib', exact=True) }}
+        - qwt 6.*
+        - qt 4.8.*
+        - expat
+
+  - name: moenchzmq
+    script: copy_moench.sh
+    requirements:
+
+      build:
+        - {{ compiler('c') }}
+        - {{compiler('cxx')}}
+        - {{ pin_subpackage('slsdetlib', exact=True) }}
+
+
+      run:
+        - {{ pin_subpackage('slsdetlib', exact=True) }}
+        - expat

conda-recepie/run_test.sh

@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: LGPL-3.0-or-other
+# Copyright (C) 2021 Contributors to the SLS Detector Package
+ctest -j2

conda-recipes/main-library/conda_build_config.yaml

@@ -1,13 +0,0 @@
-
-c_compiler:
-  - gcc                        # [linux]
-
-c_stdlib:
-  - sysroot                    # [linux]
-
-cxx_compiler:
-  - gxx                        # [linux]
-
-
-c_stdlib_version:              # [linux]
-  - 2.17                       # [linux]

conda-recipes/main-library/meta.yaml

@@ -1,78 +0,0 @@
-source:
-  path: ../..
-
-{% set version = load_file_regex(load_file = 'VERSION', regex_pattern = '(\d+(?:\.\d+)*(?:[\+\w\.]+))').group(1) %}
-package:
-  name: sls_detector_software
-  version: {{ version }} 
-  
-build:
-  number: 0
-  binary_relocation: True
-  rpaths: 
-    - lib/
-
-requirements:
-  build:
-    - {{ compiler('c') }}
-    - {{ stdlib("c") }}
-    - {{ compiler('cxx') }}
-    - git
-    - cmake
-    - ninja
-    - qt 5.*
-
-  host:
-    - libstdcxx-ng
-    - libgcc-ng
-    - libgl-devel  # [linux]
-    - libtiff
-    - zlib
-    - expat
-
-  run:
-    - libstdcxx-ng
-    - libgcc-ng 
-
-
-outputs:
-  - name: slsdetlib
-    script: copy_lib.sh
-
-    requirements:
-      build:
-        - {{ compiler('c') }}
-        - {{ stdlib("c") }}
-        - {{ compiler('cxx') }}
-
-      run: 
-        - libstdcxx-ng
-        - libgcc-ng
-
-
-  - name: slsdetgui
-    script: copy_gui.sh
-    requirements:
-
-      build:
-        - {{ compiler('c') }}
-        - {{compiler('cxx')}}
-        - {{ pin_subpackage('slsdetlib', exact=True) }}
-
-      run:
-        - {{ pin_subpackage('slsdetlib', exact=True) }}
-        - qt 5.*
-
-
-  - name: moenchzmq
-    script: copy_moench.sh
-    requirements:
-
-      build:
-        - {{ compiler('c') }}
-        - {{compiler('cxx')}}
-        - {{ pin_subpackage('slsdetlib', exact=True) }}
-
-
-      run:
-        - {{ pin_subpackage('slsdetlib', exact=True) }}

conda-recipes/python-client/conda_build_config.yaml

@@ -1,16 +0,0 @@
-python:
-    - 3.11 
-    - 3.12
-    - 3.13
-
-c_compiler:
-  - gcc                        # [linux]
-
-c_stdlib:
-  - sysroot                    # [linux]
-
-cxx_compiler:
-  - gxx                        # [linux]
-
-c_stdlib_version:              # [linux]
-  - 2.17                       # [linux]

conda-recipes/python-client/meta.yaml

@@ -1,45 +0,0 @@
-source:
-  path: ../..
-
-{% set version = load_file_regex(load_file = 'VERSION', regex_pattern = '(\d+(?:\.\d+)*(?:[\+\w\.]+))').group(1) %}
-package:
-  name: slsdet
-  version: {{ version }} 
-
-build:
-  number: 0
-  script:
-    - unset CMAKE_GENERATOR && {{ PYTHON }} -m pip install . -vv  # [not win]
-
-requirements:
-  build:
-    - python {{python}}
-    - {{ compiler('c') }}
-    - {{ stdlib("c") }}
-    - {{ compiler('cxx') }}
-
-  host:
-    - cmake
-    - ninja
-    - python {{python}}
-    - pip
-    - scikit-build-core
-    - pybind11 >=2.13.0
-    - fmt
-    - zeromq
-    - nlohmann_json
-    - catch2
-
-  run:
-    - python {{python}}
-    - numpy
-
-
-test:
-  imports:
-    - slsdet
-
-
-about:
-  summary: An example project built with pybind11 and scikit-build.
-  # license_file: LICENSE

ctbGui/CMakeLists.txt

@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: LGPL-3.0-or-other
+# Copyright (C) 2021 Contributors to the SLS Detector Package
+
+
+find_package(ROOT CONFIG REQUIRED  COMPONENTS Core Gui)
+find_package(TIFF REQUIRED)
+
+target_include_directories(ROOT::Core INTERFACE "${ROOT_INCLUDE_DIRS}")
+add_library(ROOT::Flags_CXX IMPORTED INTERFACE)
+separate_arguments(ROOT_CXX_FLAGS)
+target_compile_options(ROOT::Flags_CXX INTERFACE ${ROOT_CXX_FLAGS})
+separate_arguments(ROOT_DEFINITIONS)
+target_compile_definitions(ROOT::Flags_CXX INTERFACE ${ROOT_DEFINITIONS})
+
+# This fixes a bug in the linker flags
+string(REPLACE "-L " "-L" ROOT_EXE_LINKER_FLAGS "${ROOT_EXE_LINKER_FLAGS}")
+separate_arguments(ROOT_EXE_LINKER_FLAGS)
+
+# Stuck into using old property method due to separate -L and -l arguments
+# (A full path to -l is better!)
+set_property(TARGET ROOT::Flags_CXX PROPERTY
+    INTERFACE_LINK_LIBRARIES ${ROOT_EXE_LINKER_FLAGS})
+set_property(TARGET ROOT::Core PROPERTY
+    INTERFACE_INCLUDE_DIRECTORIES "${ROOT_INCLUDE_DIRS}")
+
+
+add_executable(ctbGui 
+    ctbGui.cpp 
+    ctbMain.cpp
+    ctbDacs.cpp
+    ctbPowers.cpp
+    ctbSlowAdcs.cpp
+    ctbSignals.cpp
+    ctbAdcs.cpp
+    ctbPattern.cpp
+    ctbAcquisition.cpp
+    ${CMAKE_SOURCE_DIR}/slsDetectorCalibration/tiffio/src/tiffIO.cpp
+)
+
+
+#TODO! Replace with target
+target_include_directories(ctbGui PRIVATE 
+    ${CMAKE_SOURCE_DIR}/slsDetectorCalibration/dataStructures
+    ${CMAKE_SOURCE_DIR}/slsDetectorCalibration/interpolations
+    ${CMAKE_SOURCE_DIR}/slsDetectorCalibration/
+    ${CMAKE_SOURCE_DIR}/slsDetectorCalibration/tiffio/include/
+)
+
+# Headders needed for ROOT dictionary generation
+set( HEADERS
+    ctbDefs.h
+    ctbMain.h 
+    ctbDacs.h   
+    ctbPattern.h  
+    ctbSignals.h  
+    ctbAdcs.h 
+    ctbAcquisition.h 
+    ctbPowers.h   
+    ctbSlowAdcs.h
+)
+
+#set(ROOT_INCLUDE_PATH ${CMAKE_CURRENT_SOURCE_DIR})
+
+# ROOT dictionary generation 
+root_generate_dictionary(ctbDict ${HEADERS} LINKDEF ctbLinkDef.h)
+add_library(ctbRootLib SHARED ctbDict.cxx)
+target_include_directories(ctbRootLib PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_link_libraries(ctbRootLib PUBLIC 
+    ROOT::Core 
+    slsDetectorShared
+    ${ROOT_LIBRARIES} 
+    ${ROOT_EXE_LINKER_FLAGS}
+)
+
+set_target_properties(
+    ctbRootLib PROPERTIES
+    LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin
+)
+
+target_link_libraries(ctbGui PUBLIC 
+    slsDetectorShared
+    ctbRootLib
+    ${TIFF_LIBRARIES}
+)
+
+set_target_properties(ctbGui PROPERTIES
+    RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin
+
+)
+

ctbGui/Makefile.root5

@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: LGPL-3.0-or-other
+# Copyright (C) 2021 Contributors to the SLS Detector Package
+
+
+INCS=ctbMain.h ctbDacs.h   ctbPattern.h  ctbSignals.h  ctbAdcs.h ctbAcquisition.h ctbPowers.h   ctbSlowAdcs.h 
+SRC= $(INCS:.h=.cpp) ctbDict.cpp 
+LINKDEF=ctbLinkDef.h 
+ZMQLIB=../slsReceiverSoftware/include
+LIBRARYCBF=$(CBFLIBDIR)/lib/*.o
+
+INCDIR=-I../slsReceiverSoftware/include/ -I../slsDetectorSoftware/include/ -I../slsSupportLib/include/  -I../slsDetectorCalibration -I../slsDetectorCalibration/dataStructures  -I$(CBFLIBDIR)/include  -I../slsDetectorCalibration/interpolations
+LDFLAG=-L../build/bin -lSlsDetector -lSlsSupport  -L/usr/lib64/ -lpthread -lm  -lstdc++  -lzmq -pthread -lrt  -ltiff -L$(ZMQLIB) -L$(CBFLIBDIR)/lib/ -std=c++11
+#
+MAIN=ctbGui.cpp
+
+DESTDIR?=../build/bin
+
+
+OBJS = $(SRC:.cpp=.o) $(MAIN:.cpp=.o)
+
+all: $(DESTDIR)/ctbGui
+
+
+doc:
+	cd manual && make DESTDIR=$(DESTDIR)
+
+htmldoc:
+	cd manual && make html DESTDIR=$(DESTDIR)
+
+ctbDict.cpp: $(INCS)  $(LINKDEF)
+	rootcint -f ctbDict.cpp -c $(INCS) $(LINKDEF)	
+
+%.o : %.cpp 
+	echo $@
+	g++ -DMYROOT `root-config --cflags --glibs` -lMinuit -DCTB $(LDFLAG)  -o $@ -c $< $(INCDIR)
+#$(CXX) -o $@ -c $< $(INCLUDES) $(DFLAGS) -fPIC  $(EPICSFLAGS) -lpthread #$(FLAGS)
+
+
+
+$(DESTDIR)/ctbGui: $(OBJS) $(LINKDEF) 
+	g++ -DMYROOT `root-config --cflags --glibs` -lMinuit -DCTB $(LDFLAG) -o ctbGui $(INCDIR) $(OBJS)  ../slsDetectorCalibration/tiffIO.cpp
+	mv ctbGui $(DESTDIR)	
+
+clean:
+	rm -f $(DESTDIR)/ctbGui *.o ctbDict.* $(OBJS)
+

ctbGui/Makefile.root6

@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: LGPL-3.0-or-other
+# Copyright (C) 2021 Contributors to the SLS Detector Package
+
+
+INCS=ctbMain.h ctbDacs.h   ctbPattern.h  ctbSignals.h  ctbAdcs.h ctbAcquisition.h ctbPowers.h   ctbSlowAdcs.h  
+SRC= $(INCS:.h=.cpp) ctbDict.cpp 
+LINKDEF=ctbLinkDef.h 
+#ctbActions.h 
+ZMQLIB=../slsReceiverSoftware/include
+LIBRARYCBF=$(CBFLIBDIR)/lib/*.o
+
+INCDIR=-I../slsReceiverSoftware/include/ -I../slsDetectorSoftware/include/ -I../slsSupportLib/include/  -I../slsDetectorCalibration -I../slsDetectorCalibration/dataStructures  -I$(CBFLIBDIR)/include  -I../slsDetectorCalibration/interpolations
+
+LDFLAG=-L../build/bin -lSlsDetector -lSlsSupport  -L/usr/lib64/ -lpthread -lm  -lstdc++  -lzmq -pthread -lrt  -ltiff -L$(ZMQLIB) -L$(CBFLIBDIR)/lib/ -std=c++11
+#
+MAIN=ctbGui.cpp
+
+DESTDIR?=../build/bin
+
+
+OBJS = $(SRC:.cpp=.o) $(MAIN:.cpp=.o)
+
+all: $(DESTDIR)/ctbGui
+
+
+doc:
+	cd manual && make DESTDIR=$(DESTDIR)
+
+htmldoc:
+	cd manual && make html DESTDIR=$(DESTDIR)
+
+ctbDict.cpp: $(INCS)  $(LINKDEF)
+	rootcling -f ctbDict.cpp -c $(INCS) $(LINKDEF)	
+
+%.o : %.cpp 
+	echo $@
+	g++ -DMYROOT `source root-config --cflags --glibs` -lMinuit -DCTB $(LDFLAG)  -o $@ -c $< $(INCDIR)
+#$(CXX) -o $@ -c $< $(INCLUDES) $(DFLAGS) -fPIC  $(EPICSFLAGS) -lpthread #$(FLAGS)
+
+
+
+$(DESTDIR)/ctbGui: $(OBJS) $(LINKDEF) 
+	g++ -DMYROOT `source root-config --cflags --glibs` -lMinuit -DCTB $(LDFLAG) -o ctbGui $(INCDIR) $(OBJS)  ../slsDetectorCalibration/tiffIO.cpp
+	mv ctbGui $(DESTDIR)	
+
+clean:
+	rm -f $(DESTDIR)/ctbGui *.o ctbDict.* $(OBJS)
+

ctbGui/ctbAcquisition.h

@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#ifndef CTBACQUISITION_H
+#define CTBACQUISITION_H
+#include  <TGFrame.h>
+
+#include "ctbAdcs.h"
+#include "ctbSignals.h"
+#include "ctbPattern.h"
+class TGTextEntry;
+class TGLabel;
+class TGNumberEntry;
+class TGCheckButton;
+class TThread;
+class TGraph;
+class TMultiGraph;
+class THStack;
+class TGButtonGroup;
+class TGRadioButton;
+class TGComboBox;
+class TTimer;
+class TCanvas;
+class TH2F;
+class TH1F;
+class TGLabel;
+class TGTextButton;
+
+namespace sls
+{
+   class Detector;
+   class detectorData;
+};
+
+template <class dataType> class slsDetectorData;
+
+class singlePhotonDetector;
+//class singlePhotonDetector;
+class commonModeSubtraction;
+
+#include <string>
+#include <stdint.h>
+using namespace std;
+
+class ctbAcquisition : public TGGroupFrame {
+
+
+  enum {DESERIALIZER, MOENCH04, MOENCH02, MOENCH03, IMAGE32B, IMAGE16B, ADCSAR2, MYTHEN301, MYTHEN302};
+
+
+ private:
+  TGTextEntry *eOutdir;
+  TGTextEntry *eFname;
+  TGNumberEntry *eFindex;
+  TGCheckButton *cFileSave;
+
+
+  TGNumberEntry *eSerOff;
+  TGNumberEntry *eDynRange;
+  TGNumberEntry *eNumCount;
+
+
+  TGNumberEntry *ePixX;
+  TGNumberEntry *ePixY;
+
+  TGNumberEntry *eFitADC;
+  TGNumberEntry *eBitPlot;
+  TGNumberEntry *eMinRaw;
+  TGNumberEntry *eMaxRaw;
+  TGNumberEntry *eMinPedSub;
+  TGNumberEntry *eMaxPedSub;
+  TGCheckButton *cMinMaxRaw;
+  TGCheckButton *cMinMaxPedSub;
+
+
+
+
+  TGNumberEntry *eMeasurements;
+
+
+
+  TGTextButton *bStatus;
+  // TGTextButton 
+  TGCheckButton *cCompile;
+  TGTextButton *cLoad;
+  //  TGCheckButton *cRun;
+  
+  TThread *acqThread;
+
+
+  THStack *adcStack;
+  THStack *bitStack;
+  THStack *countsStack;
+
+
+  TH1F *adcHisto[NADCS];
+  TH1F *countsHisto[NADCS];
+ 
+  TH1F *bitHisto[NSIGNALS];
+  float bitOffset[NSIGNALS];
+  
+  // int enableFlag[NADCS+4];
+  int roMode;
+
+  int dBitOffset;
+
+
+
+  TH1F *adcFit;
+  TH1F *bitPlot;
+  TH1F *countsFit;
+
+
+
+  TH2F *h2DMapAn; // for 2D detectors
+  TH2F *h2DMapDig; // for 2D detectors
+  TH1F *h1DMap; //for 1D detectors
+
+  //  TH2F *h2Scan; // for 2D detectors
+  // TMultiGraph *mgAdcs;
+  // TH1I *plotAdc[NADCS];
+
+
+  sls::Detector* myDet;
+  
+  int plotFlag[NADCS];
+  int bitPlotFlag[NSIGNALS];
+  
+  int ip;
+  // int nChannels;
+  // int chanEnable;
+  //int nADCs;
+
+  std::vector <int> dbitlist;
+  std::vector <int> adclist;
+
+  TGButtonGroup *bgPlot;// = new TGVButtonGroup(main_frame);
+  TGRadioButton *rbPlotOff;
+  TGRadioButton *rbWaveform;
+  TGRadioButton *rbDistribution;
+  TGRadioButton *rb2D;
+  //  TGRadioButton *rbScan;
+  TGComboBox *cbDetType;
+  TGCheckButton *cbGetPedestal;
+  TGCheckButton *cbSubtractPedestal;
+  TGCheckButton *cbCommonMode;
+  TGTextButton *bResetPedestal;
+
+  TGLabel *lClickX;
+  TGLabel *lClickY;
+  TGLabel *lClickValue;
+
+
+  TCanvas *myCanvas;
+  TTimer *plotTimer;
+
+  char patternFile[10000];
+  char patternCompiler[10000];
+  
+  int globalPlot;
+  int adcPlot;
+  int dbitPlot;
+  int tenG;
+
+  int nAnalogSamples, nDigitalSamples;
+  // int iScanStep;
+
+  slsDetectorData<uint16_t> *dataStructure;
+  singlePhotonDetector *photonFinder;
+    //singlePhotonDetector *photonFinder;
+  commonModeSubtraction *commonMode;
+  int cmSub;
+
+  int stop;
+
+  uint64_t dBitMask;
+
+  int deserializer;
+
+ public:
+   ctbAcquisition(TGVerticalFrame*,  sls::Detector*);
+   void setOutdir();
+   void setFname();
+   void setMeasurements();
+   void setFsave(Bool_t);
+   void changePlot(Int_t);
+   void changeDetector(Int_t);
+   void changePlot();
+   void changeDetector();
+   void setFindex();
+   void Draw();
+   void setCanvas(TCanvas*);
+
+   void toggleAcquisition();
+   void loadPattern();
+   static void* ThreadHandle(void *arg);
+   void update();
+   void acquisitionFinished();
+   //  string getParameters();
+
+   void setGraph (int i ,int en, Pixel_t col);
+   void setBitGraph (int i ,int en, Pixel_t col);
+   void startAcquisition();
+   static   void progressCallback(double,void*);
+   static void dataCallback(sls::detectorData*, long unsigned int, unsigned int,  void*);
+   int StopFlag;
+   
+   int plotData(sls::detectorData*, int);
+
+   void setPatternFile(const char* t);
+
+   void setPatternCompiler(const char* t);
+
+   void setAnalogSamples(int);
+   void setDigitalSamples(int);
+   
+   void setADCEnable(Int_t);
+   void setDbitEnable(Int_t);
+   void setReadoutMode(int);
+   void updateChans();
+
+   void resetPedestal();
+
+   void ToggleCommonMode(Bool_t);
+   void TogglePedSub(Bool_t);
+   void ChangeHistoLimitsPedSub(Long_t );
+   void ChangeHistoLimitsRaw(Long_t);
+   void ChangeHistoLimitsPedSub( );
+   void ChangeHistoLimitsRaw();
+   void ChangeHistoLimitsPedSub(Bool_t );
+   void ChangeHistoLimitsRaw(Bool_t);
+   
+
+   void ChangeSerialOffset();
+   void ChangeSerialOffset(Long_t);
+   void ChangeNumberOfChannels();
+   void ChangeNumberOfChannels(Long_t);
+   void ChangeDynamicRange();
+   void ChangeDynamicRange(Long_t);
+   void ChangeImagePixels();
+   void ChangeImagePixels(Long_t);
+
+   void canvasClicked();
+   void FitADC();
+   void plotBit();
+   ClassDef(ctbAcquisition,0)
+};
+
+#endif

ctbGui/ctbAdcs.cpp

@@ -0,0 +1,616 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#include <TApplication.h>
+#include <TGClient.h>
+#include <TCanvas.h>
+#include <TF1.h>
+#include <TRandom.h>
+#include <TGButton.h>
+#include <TRootEmbeddedCanvas.h>
+#include <TGButtonGroup.h>
+#include <TGNumberEntry.h>
+#include <TGLabel.h>
+#include <TList.h>
+#include <TGFileDialog.h>
+#include <TGComboBox.h>
+#include <TH2F.h>
+#include <TColor.h>
+#include <TH1F.h>
+#include <TGraphErrors.h>
+#include <TGColorSelect.h>
+#include <THStack.h>
+#include <TGTab.h>
+
+#include <stdio.h>
+#include <iostream>
+#include <fstream>
+
+#include "ctbAdcs.h"
+#include "ctbDefs.h"
+#include "sls/Detector.h"
+
+using namespace std;
+
+
+
+ctbAdc::ctbAdc(TGVerticalFrame *page, int i, sls::Detector *det)
+  : TGHorizontalFrame(page, 800,800), id(i), myDet(det) {
+
+  TGHorizontalFrame *hframe=this;
+  char tit[100];
+
+   page->AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+   hframe->MapWindow();
+
+
+   
+
+
+   sprintf(tit, "ADC%d", id);
+
+   sAdcLabel= new TGLabel(hframe, tit);
+   hframe->AddFrame(sAdcLabel,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   sAdcLabel->MapWindow();
+   sAdcLabel->SetTextJustify(kTextLeft);
+
+
+
+   
+   
+
+   sAdcInvert= new TGCheckButton(hframe, "Inv");
+   hframe->AddFrame( sAdcInvert,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   sAdcInvert->MapWindow();
+   sAdcInvert->Connect("Toggled(Bool_t)","ctbAdc",this,"ToggledInvert(Bool_t)");
+
+
+   sAdcEnable= new TGCheckButton(hframe, "En");
+   hframe->AddFrame( sAdcEnable,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   sAdcEnable->MapWindow();
+   // sAdcEnable->SetOn(kTRUE);
+   // sAdcEnable->SetEnabled(kFALSE);
+   sAdcEnable->Connect("Toggled(Bool_t)","ctbAdc",this,"ToggledEnable(Bool_t)");
+
+
+
+   sAdcPlot= new TGCheckButton(hframe, "Plot");
+   hframe->AddFrame( sAdcPlot,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   sAdcPlot->MapWindow();
+
+
+   sAdcPlot->Connect("Toggled(Bool_t)","ctbAdc",this,"ToggledPlot(Bool_t)");
+
+
+
+   fColorSel = new TGColorSelect(hframe, id+1, 0);
+
+   fColorSel->Connect("ColorSelected(Pixel_t)","ctbAdc",this,"ColorChanged(Pixel_t)");
+   hframe->AddFrame(fColorSel, new TGLayoutHints(kLHintsTop |
+                          kLHintsLeft, 2, 0, 2, 2));
+   
+
+   fColorSel->SetColor(TColor::Number2Pixel(id+1));
+   //   sprintf(tit,"adc%d",id);
+//    gADC=new TGraph();
+//    gADC->SetName(tit);
+//    gADC->SetLineColor(id+1);
+//    gADC->SetMarkerColor(id+1);
+   
+   
+
+};
+Pixel_t ctbAdc::getColor(){
+  return fColorSel->GetColor();
+}
+Bool_t ctbAdc::getEnabled(){
+  return getPlot();
+}
+Bool_t ctbAdc::getPlot(){
+  return sAdcPlot->IsOn();
+}
+Bool_t ctbAdc::getInverted(){
+  return sAdcInvert->IsOn();
+}
+
+Bool_t ctbAdc::getEnable(){
+  return sAdcEnable->IsOn();
+}
+
+
+
+void ctbAdc::setInverted(Bool_t b){
+  //  cout << id << "set enabled " << b << endl;
+  if (b)
+    sAdcInvert->SetOn(kTRUE,kTRUE);
+  else
+    sAdcInvert->SetOn(kFALSE,kTRUE);
+    
+}
+
+
+void ctbAdc::setEnable(Bool_t b){
+  //  cout << id << "set enabled " << b << endl;
+  if (b)
+    sAdcEnable->SetOn(kTRUE,kFALSE);
+  else
+    sAdcEnable->SetOn(kFALSE,kFALSE);
+    
+}
+
+
+
+
+
+void ctbAdc::setAdcAlias(char *tit, int plot, int color) {
+  if (tit)
+    sAdcLabel->SetText(tit);
+  if (plot>0)
+    sAdcPlot->SetOn(kTRUE,kTRUE);
+  else if (plot==0)
+    sAdcPlot->SetOn(kFALSE,kTRUE);
+  if (color>=0)
+    fColorSel->SetColor(color);
+  fColorSel->SetEnabled(sAdcPlot->IsOn());
+}
+
+
+string ctbAdc::getAdcAlias() {
+
+  char line[1000];
+  sprintf(line,"ADC%d %s %d %lx\n",id,sAdcLabel->GetText()->Data(),sAdcPlot->IsOn(),fColorSel->GetColor());
+  return string(line);
+}
+
+void ctbAdc::update() {
+
+  
+  //Emit("ToggledAdcEnable(Int_t)", id);
+  
+}
+
+
+void ctbAdc::ToggledPlot(Bool_t b){
+
+  //  Long_t mask=b<<id;
+  //  ToggledAdcPlot(mask);
+  cout << "Colsel " << id << " enable " << b << endl;
+  if (b)
+    fColorSel->SetEnabled(kTRUE);
+  else
+    fColorSel->SetEnabled(kFALSE);
+    
+  // fColorSel->SetEnabled(sAdcPlot->IsOn());
+  Emit("ToggledAdcPlot(Int_t)", id);
+  
+}
+
+
+
+void ctbAdc::ToggledInvert(Bool_t b){
+
+    
+  // fColorSel->SetEnabled(sAdcPlot->IsOn());
+  Emit("ToggledAdcInvert(Int_t)", id);
+  
+}
+
+
+
+void ctbAdc::ToggledEnable(Bool_t b){
+
+    
+  fColorSel->SetEnabled(sAdcPlot->IsOn());
+  Emit("ToggledAdcEnable(Int_t)", id);
+  
+}
+
+
+
+
+
+
+void ctbAdc::ColorChanged(Pixel_t) {
+  
+  Emit("ToggledAdcPlot(Int_t)", id);
+
+}
+
+void ctbAdc::ToggledAdcPlot(Int_t b){
+
+  
+  Emit("ToggledAdcPlot(Int_t)", id);
+
+}
+
+void ctbAdc::ToggledAdcInvert(Int_t b){
+
+  
+  Emit("ToggledAdcInvert(Int_t)", id);
+
+}
+
+void ctbAdc::ToggledAdcEnable(Int_t b){
+
+  
+  Emit("ToggledAdcEnable(Int_t)", id);
+
+}
+
+
+
+
+void ctbAdc::setEnabled(Bool_t b){
+  //  cout << id << "set enabled " << b << endl;
+  if (b)
+    sAdcPlot->SetOn(kTRUE,kFALSE);
+  else
+    sAdcPlot->SetOn(kFALSE,kFALSE);
+    
+}
+
+
+
+void ctbAdc::setPlot(Bool_t b){
+  //  cout << id << "set enabled " << b << endl;
+  if (b)
+    sAdcPlot->SetOn(kTRUE,kTRUE);
+  else
+    sAdcPlot->SetOn(kFALSE,kTRUE);
+    
+  
+}
+
+
+
+
+
+
+
+ctbAdcs::ctbAdcs(TGVerticalFrame *page, sls::Detector *det)
+  : TGGroupFrame(page,"Adcs",kVerticalFrame), myDet(det) {
+
+
+  SetTitlePos(TGGroupFrame::kLeft);
+  page->AddFrame(this,new TGLayoutHints( kLHintsTop | kLHintsExpandX , 10,10,10,10));
+  MapWindow();
+  
+
+ 
+  TGHorizontalFrame* hframe=new TGHorizontalFrame(this, 800,800);
+  AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+  hframe->MapWindow();
+
+
+
+
+  int idac=0;
+
+
+
+
+ 
+  TGHorizontalFrame* hhframe=new TGHorizontalFrame(this, 800,800);
+  AddFrame(hhframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+  hhframe->MapWindow();
+
+  TGVerticalFrame *vframe;
+
+
+
+
+  for (idac=0; idac<NADCS; idac++) {
+    if (idac%16==0) {
+
+
+    vframe=new TGVerticalFrame(hhframe, 400,800);
+     hhframe->AddFrame(vframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+    vframe->MapWindow();
+   
+  
+
+    }
+
+    sAdc[idac]=new ctbAdc(vframe,idac,myDet);
+
+    
+    sAdc[idac]->Connect("ToggledAdcPlot(Int_t)","ctbAdcs",this,"ToggledAdcPlot(Int_t)");
+    sAdc[idac]->Connect("ToggledAdcInvert(Int_t)","ctbAdcs",this,"ToggledAdcInvert(Int_t)");
+    sAdc[idac]->Connect("ToggledAdcEnable(Int_t)","ctbAdcs",this,"ToggledAdcEnable(Int_t)");
+
+  }
+
+  hframe=new TGHorizontalFrame(this, 800,800);
+  AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+  hframe->MapWindow();
+
+
+    bCheckHalf[0]=new TGTextButton(hframe, "All 0-15");
+    hframe->AddFrame(bCheckHalf[0],new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 5, 5, 5, 5));
+    bCheckHalf[0]->MapWindow();
+    bCheckHalf[0]->Connect("Clicked()","ctbAdcs",this,"CheckHalf0()");
+
+
+    bRemoveHalf[0]=new TGTextButton(hframe, "None 0-15");
+    hframe->AddFrame(bRemoveHalf[0],new TGLayoutHints(kLHintsBottom |  kLHintsExpandX, 5, 5, 5, 5));
+    bRemoveHalf[0]->MapWindow();
+    bRemoveHalf[0]->Connect("Clicked()","ctbAdcs",this,"RemoveHalf0()");
+
+
+    bCheckHalf[1]=new TGTextButton(hframe, "All 16-23");
+    hframe->AddFrame(bCheckHalf[1],new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 5, 5, 5, 5));
+    bCheckHalf[1]->MapWindow();
+    bCheckHalf[1]->Connect("Clicked()","ctbAdcs",this,"CheckHalf1()");
+    //  bCheckAll->Connect("Clicked()","ctbAdcs",this,"CheckAll()");
+
+
+    bRemoveHalf[1]=new TGTextButton(hframe, "None 16-23");
+    hframe->AddFrame(bRemoveHalf[1],new TGLayoutHints(kLHintsBottom |  kLHintsExpandX, 5, 5, 5, 5));
+    bRemoveHalf[1]->MapWindow();
+    bRemoveHalf[1]->Connect("Clicked()","ctbAdcs",this,"RemoveHalf1()");
+    // bRemoveAll->Connect("Clicked()","ctbAdcs",this,"RemoveAll()");
+
+
+
+
+  hframe=new TGHorizontalFrame(this, 800,800);
+  AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+  hframe->MapWindow();
+
+
+    bCheckAll=new TGTextButton(hframe, "All");
+    hframe->AddFrame(bCheckAll,new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 5, 5, 5, 5));
+    bCheckAll->MapWindow();
+    bCheckAll->Connect("Clicked()","ctbAdcs",this,"CheckAll()");
+
+
+    bRemoveAll=new TGTextButton(hframe, "None");
+    hframe->AddFrame(bRemoveAll,new TGLayoutHints(kLHintsBottom |  kLHintsExpandX, 5, 5, 5, 5));
+    bRemoveAll->MapWindow();
+    bRemoveAll->Connect("Clicked()","ctbAdcs",this,"RemoveAll()");
+
+
+
+  hframe=new TGHorizontalFrame(this, 800,50);
+ AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+  hframe->MapWindow();
+
+
+  TGLabel *label= new TGLabel(hframe, "Inversion mask: ");
+   hframe->AddFrame(label,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   label->MapWindow();
+   label->SetTextJustify(kTextLeft);
+
+
+   eInversionMask = new TGNumberEntry(hframe, 0, 16,999, TGNumberFormat::kNESHex,
+                                               TGNumberFormat::kNEANonNegative, 
+                                               TGNumberFormat::kNELNoLimits);
+
+  hframe->AddFrame(eInversionMask,new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 1, 1, 1, 1));
+   eInversionMask->MapWindow();
+   eInversionMask->Resize(150,30);
+   eInversionMask->SetState(kFALSE);
+
+
+  hframe=new TGHorizontalFrame(this, 800,50);
+ AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+  hframe->MapWindow();
+
+
+ label= new TGLabel(hframe, "Enable mask: ");
+   hframe->AddFrame(label,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   label->MapWindow();
+   label->SetTextJustify(kTextLeft);
+
+
+   eEnableMask = new TGNumberEntry(hframe, 0, 16,999, TGNumberFormat::kNESHex,
+                                               TGNumberFormat::kNEANonNegative, 
+                                               TGNumberFormat::kNELNoLimits);
+
+   hframe->AddFrame(eEnableMask,new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 1, 1, 1, 1));
+   eEnableMask->MapWindow();
+   eEnableMask->Resize(150,30);
+   eEnableMask->SetState(kFALSE);
+
+}
+
+
+int ctbAdcs::setEnable(int reg) {
+
+  try {
+    if (reg > -1) {
+      myDet->setADCEnableMask(reg);
+    }
+    auto retval = myDet->getADCEnableMask().tsquash("Different values");
+    eEnableMask->SetHexNumber(retval);
+    return retval;
+  } CATCH_DISPLAY ("Could not set/get adc enablemask.", "ctbAdcs::setEnable")
+  
+  return -1;
+}
+
+int ctbAdcs::setInvert(int reg) {
+
+  try {
+    if (reg > -1) {
+      myDet->setADCInvert(reg);
+    }
+    auto retval = myDet->getADCInvert().tsquash("Different values");
+    eInversionMask->SetHexNumber(retval);
+    return retval;
+  } CATCH_DISPLAY ("Could not set/get adc enablemask.", "ctbAdcs::setEnable")
+  
+  return -1;
+}
+
+
+
+void ctbAdcs::update() {
+  Int_t invreg;
+  Int_t disreg;
+
+  disreg=setEnable();
+  invreg=setInvert();
+  
+  for (int is=0; is<NADCS; is++) {
+    sAdc[is]->setAdcAlias(NULL,-1,-1);
+    if (invreg & (1<<is) )
+      sAdc[is]->setInverted(kTRUE);
+    else
+      sAdc[is]->setInverted(kFALSE);
+
+    if (disreg & (1<<is) )
+      sAdc[is]->setEnable(kTRUE);
+    else
+      sAdc[is]->setEnable(kFALSE);
+  }
+  
+   Emit("AdcEnable(Int_t)", disreg);
+
+}
+string ctbAdcs::getAdcParameters() {
+    ostringstream line;
+  line << "reg "<< hex  << setInvert() << "# ADC invert reg" << dec << endl;
+  line << "reg "<< hex  << setEnable() << " # ADC enable reg"<< dec <<  endl;
+  return line.str();
+
+}
+
+
+void ctbAdcs::CheckAll() {
+  for (int is=0; is<NADCS; is++){
+    sAdc[is]->setPlot(kTRUE);
+  }
+}
+
+
+void ctbAdcs::RemoveAll() {
+  for (int is=0; is<NADCS; is++) {
+    sAdc[is]->setPlot(kFALSE);
+  }
+}
+
+
+
+void ctbAdcs::CheckHalf0() {
+  for (int is=0; is<NADCS/2; is++) {
+    sAdc[is]->setPlot(kTRUE);
+  }
+}
+
+
+void ctbAdcs::RemoveHalf0() {
+  for (int is=0; is<NADCS/2; is++){
+    sAdc[is]->setPlot(kFALSE);
+  }
+}
+
+void ctbAdcs::CheckHalf1() {
+  for (int is=NADCS/2; is<NADCS; is++){
+    sAdc[is]->setPlot(kTRUE);
+  }
+}
+
+
+void ctbAdcs::RemoveHalf1() {
+  for (int is=NADCS/2; is<NADCS; is++){
+    sAdc[is]->setPlot(kFALSE);
+  }
+}
+
+
+int ctbAdcs::setAdcAlias(string line) {
+
+  int is=-1, plot=0, color=-1;
+  char tit[100];
+  int narg=sscanf(line.c_str(),"ADC%d %s %d %x",&is,tit,&plot, &color);
+  if (narg<2)
+    return -1;
+  if (narg!=3)
+    color=-1;
+  if (is>=0 && is<NADCS) {
+    sAdc[is]->setAdcAlias(tit,plot,color);
+  }
+  return is;
+
+}
+
+string ctbAdcs::getAdcAlias() {
+
+  ostringstream line;
+
+  for (int is=0; is<NADCS; is++)
+    line << sAdc[is]->getAdcAlias();
+
+  return line.str();
+}
+
+
+void ctbAdcs::ToggledAdcPlot(Int_t b){
+
+  
+  Emit("ToggledAdcPlot(Int_t)", b);
+
+}
+
+void ctbAdcs::AdcEnable(Int_t b){
+   Emit("AdcEnable(Int_t)", b);
+}
+
+
+void ctbAdcs::ToggledAdcEnable(Int_t b){
+
+   Int_t oreg=setEnable();
+   Int_t m=1<<b;
+  
+   if (sAdc[b]->getEnable())
+     oreg|=m;
+   else
+     oreg&=~m;
+
+   setEnable(oreg);
+  
+   Emit("AdcEnable(Int_t)", oreg);
+}
+
+
+void ctbAdcs::ToggledAdcInvert(Int_t b){
+
+   Int_t oreg=setInvert();
+   Int_t m=1<<b;
+  
+
+   if (sAdc[b]->getInverted())
+     oreg|=m;
+   else
+     oreg&=~m;
+  
+   setInvert(oreg);
+}
+
+
+
+
+
+Pixel_t ctbAdcs::getColor(int i){
+  if (i>=0 && i<NADCS)
+    return sAdc[i]->getColor();
+  return static_cast<Pixel_t>(-1);
+}
+
+Bool_t ctbAdcs::getEnabled(int i){
+  if (i>=0 && i<NADCS)
+    return sAdc[i]->getEnabled();
+  return static_cast<Bool_t>(-1);
+}
+
+Bool_t ctbAdcs::getEnable(int i){
+  if (i>=0 && i<NADCS)
+    return sAdc[i]->getEnable();
+  return static_cast<Bool_t>(-1);
+}
+
+Bool_t ctbAdcs::getPlot(int i){
+  if (i>=0 && i<NADCS)
+    return sAdc[i]->getPlot();
+  return static_cast<Bool_t>(-1);
+}

ctbGui/ctbAdcs.h

@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+
+
+
+#ifndef CTBADCS_H
+#define CTBADCS_H
+#include  <TGFrame.h>
+
+
+#define NADCS 32
+
+class TRootEmbeddedCanvas;
+class TGButtonGroup;
+class TGVerticalFrame;
+class TGHorizontalFrame;
+class TGTextEntry;
+class TGLabel;
+class TGNumberEntry;
+class TH2F;
+class TGComboBox;
+class TGCheckButton;
+class TGColorSelect;
+class TColor;
+
+class   THStack;
+class   TGraphErrors;
+class  TGTextButton;
+class  TGTab;
+
+class TGraph;
+
+namespace sls
+{
+   class Detector;
+};
+
+#include <string>
+using namespace std;
+
+class ctbAdc : public TGHorizontalFrame {
+
+
+ private:
+  
+
+   TGLabel *sAdcLabel;
+   TGCheckButton *sAdcEnable;
+   TGCheckButton *sAdcPlot;
+   TGCheckButton *sAdcInvert;
+
+   TGColorSelect  *fColorSel;
+
+   //  TGraph *gADC;
+
+   int id;
+   sls::Detector *myDet;
+   
+ public:
+   ctbAdc(TGVerticalFrame *page, int i, sls::Detector *det);
+
+
+   void setAdcAlias(char *tit, int plot, int color);
+   string getAdcAlias();
+   void ToggledAdcPlot(Int_t b);
+   void ToggledAdcEnable(Int_t b);
+   void ToggledAdcInvert(Int_t b);
+
+
+   void ToggledPlot(Bool_t b);
+   void ToggledEnable(Bool_t b);
+   void ToggledInvert(Bool_t b);
+   void ColorChanged(Pixel_t);
+   void setEnabled(Bool_t b);
+   Bool_t getEnabled();
+   // TGraph *getGraph();
+   void update();
+
+   Pixel_t getColor();
+   
+   Bool_t getEnable();
+   void setEnable(Bool_t);
+   void setPlot(Bool_t);
+   Bool_t getInverted();
+   Bool_t getPlot();
+   void setInverted(Bool_t);
+
+   ClassDef(ctbAdc,0)
+     };
+
+
+
+class ctbAdcs : public TGGroupFrame {
+private:
+  
+  ctbAdc *sAdc[NADCS];
+   sls::Detector *myDet;
+
+   
+  TGTextButton *bCheckAll;
+  TGTextButton *bRemoveAll;
+  TGTextButton *bCheckHalf[2];
+  TGTextButton *bRemoveHalf[2];
+  TGNumberEntry *eInversionMask;
+  TGNumberEntry *eEnableMask;
+
+
+/*   TGTextButton *bPlotSelected; */
+/*   TGNumberEntry *eMinX; */
+/*   TGNumberEntry *eMaxX; */
+/*   TGNumberEntry *eMinY; */
+/*   TGNumberEntry *eMaxY; */
+  
+  
+
+/*   TGTextButton *bGetPixel; */
+/*   TGNumberEntry *ePixelX; */
+/*   TGNumberEntry *ePixelY; */
+/*   TGLabel *lPixelValue; */
+
+public:
+
+   ctbAdcs(TGVerticalFrame *page, sls::Detector *det);
+   int setAdcAlias(string line);
+   string getAdcAlias();
+   string getAdcParameters();
+   void ToggledAdcPlot(Int_t);
+   void ToggledAdcInvert(Int_t);
+   void ToggledAdcEnable(Int_t);
+   void AdcEnable(Int_t b);
+   //   TGraph *getGraph(int i);
+   void CheckAll();
+   void RemoveAll();
+   void update();
+
+   int setInvert(int reg=-1);
+   int setEnable(int reg=-1);
+
+
+   Pixel_t getColor(int i);
+   Bool_t getEnabled(int i);
+   Bool_t getPlot(int i);
+   Bool_t getEnable(int i);
+
+   void CheckHalf0();
+   void RemoveHalf0();
+   
+   void CheckHalf1();
+   void RemoveHalf1();
+   
+
+   ClassDef(ctbAdcs,0)
+};
+
+#endif
+
+

ctbGui/ctbDacs.cpp

@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+
+#include <stdio.h>
+#include <iostream>
+#include <fstream>
+
+#include <TGTextEntry.h>
+#include <TGLabel.h>
+#include <TGNumberEntry.h>
+#include <TGButton.h>
+
+#include "ctbDacs.h"
+#include "ctbDefs.h"
+#include "sls/Detector.h"
+#include "sls/sls_detector_defs.h"
+
+using namespace std;
+
+
+ctbDac::ctbDac(TGGroupFrame *page, int idac, sls::Detector *det) : TGHorizontalFrame(page, 800,50) , id(idac), myDet(det) {
+
+    TGHorizontalFrame *hframe=this;
+
+    page->AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+    MapWindow();
+
+    char tit[100];
+    
+
+   sprintf(tit, "DAC %d:",idac);
+
+   dacsLabel= new TGCheckButton(hframe, tit);// new TGLabel(hframe, tit);
+   dacsLabel->SetOn(kTRUE, kTRUE);
+   
+   dacsLabel->Connect("Toggled(Bool_t)","ctbDac",this,"setOn(Bool_t)");
+
+
+   hframe->AddFrame(dacsLabel,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 5, 5, 5, 5));
+   dacsLabel->MapWindow();
+   dacsLabel->SetTextJustify(kTextLeft);
+
+  
+   dacsEntry = new TGNumberEntry(hframe, 0, 9,999, TGNumberFormat::kNESInteger,
+                                               TGNumberFormat::kNEANonNegative, 
+                                               TGNumberFormat::kNELLimitMinMax,
+                                               0, 65535);
+
+  hframe->AddFrame(dacsEntry,new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 5, 5, 5, 5));
+   dacsEntry->MapWindow();
+   dacsEntry->Resize(150,30);
+
+
+   dacsUnit= new TGCheckButton(hframe, "mV");
+   // if (idac!=slsDetectorDefs::ADC_VPP) {
+     hframe->AddFrame( dacsUnit,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 5, 5, 5, 5));
+     dacsUnit->MapWindow();
+     if (idac==slsDetectorDefs::ADC_VPP) {
+       dacsUnit->SetEnabled(kFALSE);
+       hframe->HideFrame(dacsUnit);
+       dacsUnit->MapWindow();
+       cout << "hiding!" << endl;
+     }
+     if (idac==slsDetectorDefs::HIGH_VOLTAGE) {
+       dacsUnit->SetText("V"); 
+       dacsUnit->SetOn(kTRUE,kTRUE);
+       dacsUnit->SetEnabled(kFALSE);
+     }
+     //}
+
+
+
+   sprintf(tit, "xxx");
+   dacsValue= new TGLabel(hframe, tit);
+   hframe->AddFrame( dacsValue,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 5, 5, 5, 5));
+   dacsValue->MapWindow();
+   dacsValue->SetTextJustify(kTextLeft);
+
+   TGTextEntry *e=dacsEntry->TGNumberEntry::GetNumberEntry();
+   e->Connect("ReturnPressed()","ctbDac",this,"setValue()");
+   // e->Connect("ValueSet(Long_t)","ctbDac",this,"setValue(Long_t)");
+   dacsEntry->Connect("ValueSet(Long_t)","ctbDac",this,"setValue(Long_t)");
+   //  cout << "(((((((((((((((((((((((((((((((" << dacsEntry->GetListOfSignals()->At(0)->IsA() << endl;
+   
+
+}
+
+
+
+int ctbDac::setLabel(char *tit, int mv) {
+  if(tit)
+    dacsLabel->SetText(tit);
+  if (mv==1)
+    dacsUnit->SetOn(kTRUE,kTRUE);
+  else if (mv==0)
+    dacsUnit->SetOn(kFALSE,kTRUE);
+  // else if (mv==2) {
+  //   ;}
+  // else if  (mv==3)
+  //   ; 
+  return id;
+
+}
+
+string ctbDac::getLabel() {
+  ostringstream line;
+  line << dacsLabel->GetText() << " " <<  dacsUnit->IsOn() << endl;
+   //  line << "DAC" << dec << id << " " <<  dacsUnit->IsOn() << endl;
+  return line.str();
+
+}
+
+int ctbDac::getMoenchDacId() {
+  slsDetectorDefs::dacIndex moenchDacIndices[8] = {slsDetectorDefs::VBP_COLBUF, slsDetectorDefs::VIPRE, slsDetectorDefs::VIN_CM, slsDetectorDefs::VB_SDA, slsDetectorDefs::VCASC_SFP, slsDetectorDefs::VOUT_CM, slsDetectorDefs::VIPRE_CDS, slsDetectorDefs::IBIAS_SFP}; 
+
+  if (id >= 8) {
+    return id;
+  }
+  return static_cast<int>(moenchDacIndices[id]);
+}
+
+void ctbDac::setValue(Long_t a) {setValue();}
+
+void ctbDac::setValue() {
+  cout << "setting dac! "<< id << " value " << dacsEntry->GetIntNumber() << " units " << dacsUnit->IsOn() << endl;
+
+  try {
+    int sid = id;
+    if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
+      sid = getMoenchDacId();
+    }
+    myDet->setDAC(static_cast<slsDetectorDefs::dacIndex>(sid), dacsEntry->GetIntNumber(), dacsUnit->IsOn()); 
+  } CATCH_DISPLAY ("Could not set dac " + to_string(id) + ".", "ctbDac::setValue")
+
+  getValue();
+}
+
+void ctbDac::setOn(Bool_t b) {
+  //  cout << "setting dac! "<< id << endl;
+  if ( dacsLabel->IsOn()) {
+    setValue();
+  } else {
+    try {
+      int sid = id;
+      if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
+	sid = getMoenchDacId();
+      }
+      myDet->setDAC(static_cast<slsDetectorDefs::dacIndex>(sid), -100, false);
+    } CATCH_DISPLAY ("Could not power off dac " + to_string(id) + ".", "ctbDac::setOn")
+  }
+  getValue();
+}
+
+int ctbDac::getValue() { 
+  try {
+    int sid = id;
+    if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
+      sid = getMoenchDacId();
+    }
+    int val = myDet->getDAC(static_cast<slsDetectorDefs::dacIndex>(sid), dacsUnit->IsOn()).tsquash("Different values"); 
+    cout << "dac " << id << " " << val << endl;
+    dacsValue->SetText(to_string(val).c_str());
+    if (val >= 0) {
+      dacsLabel->SetOn(kTRUE);
+    } else {
+      dacsLabel->SetOn(kFALSE);
+    }
+    return val;
+  } CATCH_DISPLAY ("Could not get dac " + to_string(id) + ".", "ctbDac::getValue")
+  
+  return -1;
+}
+
+
+ctbDacs::ctbDacs(TGVerticalFrame *page, sls::Detector *det)   : TGGroupFrame(page,"DACs",kVerticalFrame) , myDet(det){
+
+  SetTitlePos(TGGroupFrame::kLeft);
+  page->AddFrame(this,new TGLayoutHints( kLHintsTop | kLHintsExpandX , 10,10,10,10));
+  MapWindow();
+  
+  // cout << "window mapped " << endl;
+
+  for (int idac=0; idac<NDACS; idac++) {
+
+     dacs[idac]=new ctbDac(this, idac, myDet);
+
+  }
+  dacs[NDACS]=new ctbDac(this, slsDetectorDefs::ADC_VPP, myDet);
+  dacs[NDACS+1]=new ctbDac(this, slsDetectorDefs::HIGH_VOLTAGE, myDet);
+  dacs[NDACS]->setLabel((char*)"ADC Vpp",2); 
+  dacs[NDACS+1]->setLabel((char*)"High Voltage",3); 
+}
+
+
+int ctbDacs::setDacAlias(string line) {
+  int is=-1, mv=0;
+  char tit[100];
+  int narg=sscanf(line.c_str(),"DAC%d %s %d",&is,tit,&mv);
+  if (narg<2)
+    return -1;
+  if (is>=0 && is<NDACS) 
+    dacs[is]->setLabel(tit,mv);
+  return is;
+
+}
+
+string ctbDacs::getDacAlias() {
+  ostringstream line;
+
+  for (int i=0; i<NDACS; i++)
+    line << dacs[i]->getLabel() << endl;
+  return line.str();
+}
+
+
+
+
+
+string ctbDacs::getDacParameters() {
+  ostringstream line;
+
+  for (int i=0; i<NDACS; i++) {
+    //line << "dacs:" << i << " " << dacs[i]->getValue << endl;
+    line << "dac:" << i << " " << dacs[i]->getValue() << endl;
+  } 
+  return line.str();
+}
+
+
+
+void  ctbDacs::update() {
+  for (int idac=0; idac<NDACS+1; idac++) {
+    dacs[idac]->getValue();
+  }
+}

ctbGui/ctbDacs.h

@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+
+
+#ifndef CTBDACS_H
+#define CTBDACS_H
+#include  <TGFrame.h>
+
+
+#define NDACS 18
+//#define NDACS 16
+
+
+class TGTextEntry;
+class TGLabel;
+class TGNumberEntry;
+class TGCheckButton;
+
+
+namespace sls
+{
+   class Detector;
+};
+
+#include <string>
+using namespace std;
+
+
+class ctbDac : public TGHorizontalFrame {
+
+
+ protected:
+  // TGLabel *dacsLabel;
+   TGNumberEntry *dacsEntry;
+   TGCheckButton *dacsUnit;
+   TGCheckButton *dacsLabel;
+   TGLabel *dacsValue;
+   int id;
+
+   sls::Detector* myDet;
+ public:
+   ctbDac(TGGroupFrame*, int , sls::Detector*);
+   void setValue();
+   void setValue(Long_t);
+   int getValue();
+   void setOn(Bool_t);
+   
+   int setLabel(char *tit, int mv);
+   string getLabel();
+int getMoenchDacId();
+
+
+   ClassDef(ctbDac,0)
+};
+
+class ctbDacs : public TGGroupFrame {
+private:
+  
+   ctbDac *dacs[NDACS+2];
+
+   sls::Detector* myDet;
+
+public:
+   ctbDacs(TGVerticalFrame *page, sls::Detector*);
+
+   int setDacAlias(string line);
+   // int setDacAlias(string line);
+   string getDacAlias();
+   string getDacParameters();
+
+   void update();
+
+   ClassDef(ctbDacs,0)
+};
+
+#endif
+

ctbGui/ctbDefs.h

@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#pragma once
+
+#include <string>
+#include <stdexcept>
+#include <chrono>
+
+//#include "sls/sls_detector_exceptions.h"
+//#include "sls/ansi.h"
+#define RED    	 	"\x1b[31m"
+#define RESET   	"\x1b[0m"
+#define BOLD    	"\x1b[1m"
+#define cprintf(code, format, ...) printf(code format RESET, ##__VA_ARGS__)
+
+
+#define CATCH_DISPLAY(m, s) catch(...) { ctbDefs::DisplayExceptions(m, s); }
+#define CATCH_HANDLE(...) catch(...) { ctbDefs::HandleExceptions(__VA_ARGS__); }
+
+class ctbDefs {
+  public:
+    /**
+     * Empty Constructor
+     */
+    ctbDefs(){};
+
+    // convert double seconds to chrono ns
+    static std::chrono::nanoseconds ConvertDoubleStoChronoNS(double timeS) {
+        using std::chrono::duration;
+        using std::chrono::duration_cast;
+        using std::chrono::nanoseconds; 
+        return duration_cast<nanoseconds>(duration<double>(timeS));
+    }
+
+    // convert chrono ns to doubel s
+    static double ConvertChronoNStoDoubleS(std::chrono::nanoseconds timeNs) {
+        using std::chrono::duration;
+        using std::chrono::duration_cast;    
+        return duration_cast<duration<double>>(timeNs).count();
+    }
+
+    static void DisplayExceptions(std::string emsg, std::string src) {
+        try {
+            throw;
+        } /* catch (const sls::SocketError &e) {
+            throw;
+        } catch (const sls::SharedMemoryError &e) {
+            throw;
+        } */catch (const std::exception &e) {
+            ExceptionMessage(emsg, e.what(), src);
+        }
+    };
+
+    template <class CT> struct NonDeduced { using type = CT; };
+    template <class S, typename RT, typename... CT>
+    static void HandleExceptions(const std::string emsg, const std::string src, S* s,
+                                    RT (S::*somefunc)(CT...),
+                                    typename NonDeduced<CT>::type... Args) {
+        try {
+            throw;
+        } /*catch (const sls::SocketError &e) {
+            throw;
+        } catch (const sls::SharedMemoryError &e) {
+            throw;
+        } */catch (const std::exception &e) {
+
+            ExceptionMessage(emsg, e.what(), src);
+            (s->*somefunc)(Args...);
+        }
+    };
+
+    static void ExceptionMessage(std::string message, 
+                    std::string exceptionMessage,
+                    std::string source) {
+        // because sls_detector_exceptions cannot be included
+      if (exceptionMessage.find("hared memory") != std::string::npos) {
+            throw;
+        }
+      if (exceptionMessage.find("annot connect") != std::string::npos) {
+            throw;
+        }
+        cprintf(RED, "Warning (%s): %s [Caught Exception: %s]\n", source.c_str(), message.c_str(), exceptionMessage.c_str());
+        //return Message(qDefs::WARNING, message + std::string("\nCaught exception:\n") + exceptionMessage, source);
+    }; 
+
+};

ctbGui/ctbGui.cpp

@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#include <TApplication.h>
+#include <TColor.h>
+
+#include <TStyle.h>
+#include <TROOT.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <iostream>
+#include <fstream>
+#include <string>
+
+#include "sls/Detector.h"
+#include "sls/sls_detector_defs.h"
+//#include "sls_receiver_defs.h"
+#include "ctbMain.h"
+#include "ctbDefs.h"
+using namespace std;
+
+
+int main(int argc, char **argv) {
+
+
+  string afname, cfname, pfname;
+  int id=0;
+
+  int af=0, cf=0, pf=0;
+
+
+  cout << " *** " << argc << endl;
+  for (int ia=0; ia<argc; ia++) {
+    if (strcmp(argv[ia],"-alias")==0) {
+      if (ia+1<argc) {
+	afname=argv[ia+1];
+	ia++;
+	af=1;
+      }
+
+    } else if  (strcmp(argv[ia],"-config")==0) {
+      if (ia+1<argc) {
+	cfname=argv[ia+1];
+	ia++;
+	cf=1;
+      }
+
+
+    } else if  (strcmp(argv[ia],"-par")==0) {
+      if (ia+1<argc) {
+  pfname=argv[ia+1];
+	ia++;
+  pf=1;
+      }
+
+
+    } else if  (strcmp(argv[ia],"-id")==0) {
+      if (ia+1<argc) {
+	id=atoi(argv[ia+1]);
+	ia++;
+      }
+    } 
+  }
+  
+
+  cout << " *** "  << endl;
+  sls::Detector *myDet = nullptr;
+  try {
+    /****** Create detector ****************/
+    myDet=new sls::Detector(id);
+    cout << "Created multi detector id " << id << endl;
+
+    if (cf) {
+      myDet->loadConfig(cfname);
+      cout << "Config file loaded successfully" << endl;
+    } else {
+      cout << "No config file specified" << endl;
+    }
+    cout << "hostname " << myDet->getHostname() << endl;
+    
+    if (pf) {
+      myDet->loadParameters(pfname);
+      cout << "Loaded parameter file successfully" << endl;
+    } else{
+      cout  << "No parameter file specified" << endl;
+    }
+  } CATCH_DISPLAY ("Could not create detector/ load config/parameters.", "ctbGui::main")
+
+  /***********Create GUI stuff *******************/
+   TApplication theApp("App",&argc,argv);
+
+
+ gStyle->SetDrawBorder(0);
+  gStyle->SetCanvasColor(kWhite);
+  gStyle->SetCanvasDefH(800);
+  gStyle->SetCanvasDefW(800);
+  gStyle->SetCanvasBorderMode(0);
+  gStyle->SetPadBorderMode(0);
+  gStyle->SetPaintTextFormat("5.2f");
+  gStyle->SetLineWidth(2);
+  gStyle->SetTextSize(1.1);
+  gStyle->SetLabelSize(0.04,"xy");
+  gStyle->SetTitleSize(0.05,"xy");
+  gStyle->SetTitleOffset(1.0,"x");
+  gStyle->SetTitleOffset(1.1,"y");
+  gStyle->SetPadTopMargin(0.15);
+  gStyle->SetPadRightMargin(0.15);
+  gStyle->SetPadBottomMargin(0.15);
+  gStyle->SetPadLeftMargin(0.15);
+  gStyle->SetLegendBorderSize(1);
+  gStyle->SetFrameBorderMode(0);
+  gStyle->SetFrameFillColor(kWhite);
+  // gStyle->SetLegendFillColor(kWhite);
+  gStyle->SetTitleFillColor(kWhite);
+  gStyle->SetFillColor(kWhite);
+  gStyle->SetStatFontSize(0.03);
+  gStyle->SetStatBorderSize(1);
+  gStyle->SetStatFormat("6.4g");
+  gStyle->SetStatX(0.95);
+  gStyle->SetStatY(0.95);
+  gStyle->SetStatW(0.2);
+  gStyle->SetStatH(0.2);
+  gStyle->SetTitleX(0.1);
+  gStyle->SetTitleY(0.95);
+  gStyle->SetTitleBorderSize(0);
+  gStyle->SetTitleFontSize(0.05);
+  gROOT->SetStyle("Default");
+
+
+  TColor::InitializeColors();
+  const Int_t NRGBs = 5;
+  const Int_t NCont = 90;
+
+  Double_t stops[NRGBs] = { 0.00, 0.34, 0.61, 0.84, 1.00 };
+  Double_t red[NRGBs]   = { 0.00, 0.00, 0.87, 1.00, 0.51 };
+  Double_t green[NRGBs] = { 0.00, 0.81, 1.00, 0.20, 0.00 };
+  Double_t blue[NRGBs]  = { 0.51, 1.00, 0.12, 0.00, 0.00 };
+  TColor::CreateGradientColorTable(NRGBs, stops, red, green, blue, NCont);
+  gStyle->SetNumberContours(NCont);
+
+
+  gROOT->ForceStyle();
+  ctbMain *mf=new ctbMain(gClient->GetRoot(), myDet);
+
+  cout << " *** " << argc << endl;
+  for (int ia=0; ia<argc; ia++)
+    cout << argv[ia] << endl;
+  
+
+  cout << " *** "  << endl;
+  
+  if (af)
+    mf->loadAlias(afname);
+  else
+    cout << "no alias specified" << endl;
+
+   theApp.Run();
+
+   return 0;
+}

ctbGui/ctbLinkDef.h

@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#pragma link C++ class ctbMain;
+#pragma link C++ class ctbDacs;
+#pragma link C++ class ctbDac;
+#pragma link C++ class ctbSignals;
+#pragma link C++ class ctbSignal;
+#pragma link C++ class ctbAdc;
+#pragma link C++ class ctbAdcs;
+#pragma link C++ class ctbLoop;
+#pragma link C++ class ctbWait;
+#pragma link C++ class ctbPattern;
+#pragma link C++ class ctbAcquisition;
+#pragma link C++ class ctbPower;
+#pragma link C++ class ctbPowers;
+#pragma link C++ class ctbSlowAdc;
+#pragma link C++ class ctbSlowAdcs;

ctbGui/ctbMain.cpp

@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#include <TApplication.h>
+#include <TGClient.h>
+#include <TCanvas.h>
+#include <TF1.h>
+#include <TRandom.h>
+#include <TGButton.h>
+#include <TRootEmbeddedCanvas.h>
+#include <TGButtonGroup.h>
+#include <TGNumberEntry.h>
+#include <TGLabel.h>
+#include <TList.h>
+#include <TGFileDialog.h>
+#include <TGComboBox.h>
+#include <TH2F.h>
+#include <TColor.h>
+#include <TH1F.h>
+#include <TGraphErrors.h>
+#include <THStack.h>
+#include <TGTab.h>
+#include <TApplication.h>
+#include <TGCanvas.h>
+#include <stdlib.h>
+
+#include <TGMenu.h>
+#include <TGDockableFrame.h>
+//#include <TGMenuBar.h>
+//#include <TGPopupMenu.h>
+
+
+
+
+#include <stdio.h>
+#include <iostream>
+#include <fstream>
+#include <string>
+
+#include "sls/Detector.h"
+#include "ctbDefs.h"
+#include "ctbMain.h"
+#include "ctbDacs.h"
+#include "ctbSlowAdcs.h"
+#include "ctbPowers.h"
+#include "ctbSignals.h"
+#include "ctbPattern.h"
+#include "ctbAdcs.h"
+#include "ctbAcquisition.h"
+//#include "ctbActions.h"
+
+using namespace std;
+
+
+
+ctbMain::ctbMain(const TGWindow *p, sls::Detector *det)
+  : TGMainFrame(p,800,800), pwrs(NULL), senses(NULL) {
+
+  myDet=det;
+
+  Connect("CloseWindow()", "ctbMain", this, "CloseWindow()");
+
+
+
+
+
+//   fMenuDock = new TGDockableFrame(this);
+//   AddFrame(fMenuDock, new TGLayoutHints(kLHintsExpandX, 0, 0, 1, 0));
+//   fMenuDock->SetWindowName("GuiTest Menu");
+
+  fMenuBarLayout = new TGLayoutHints(kLHintsTop | kLHintsExpandX);
+  fMenuBarItemLayout = new TGLayoutHints(kLHintsTop | kLHintsLeft, 0, 4, 0, 0);
+  fMenuBarHelpLayout = new TGLayoutHints(kLHintsTop | kLHintsRight);
+
+  fMenuFile = new TGPopupMenu(gClient->GetRoot());
+  int im=0;
+
+   fMenuFile->AddEntry("Open Alias", im++);
+   fMenuFile->AddEntry("Save Alias", im++);
+   fMenuFile->AddSeparator();
+   fMenuFile->AddEntry("Open Parameters", im++);
+   fMenuFile->AddEntry("Save Parameters", im++);
+   fMenuFile->AddSeparator();
+   fMenuFile->AddEntry("Open Configuration", im++);
+   fMenuFile->AddEntry("Save Configuration", im++);
+   fMenuFile->AddSeparator();
+   fMenuFile->AddEntry("Open Pattern", im++);
+   fMenuFile->AddEntry("Save Pattern", im++);
+   fMenuFile->AddSeparator();
+   fMenuFile->AddEntry("Exit", im++);
+
+    fMenuFile->Connect("Activated(Int_t)", "ctbMain", this,
+                       "HandleMenu(Int_t)");
+ 
+
+    i_dacs=-1;
+    i_pwrs=-1;
+    i_senses=-1;
+    i_sig=-1;
+    i_adcs=-1;
+    i_pat=-1;
+    i_acq=-1;
+
+    int i_page=0;
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  TGVerticalFrame *vframe=new TGVerticalFrame(this, 800,1200); //main frame
+
+
+
+   fMenuBar = new TGMenuBar(vframe, 1, 1, kHorizontalFrame);
+   fMenuBar->AddPopup("&File", fMenuFile, fMenuBarItemLayout);
+//    fMenuBar->AddPopup("&Test", fMenuTest, fMenuBarItemLayout);
+//    fMenuBar->AddPopup("&View", fMenuView, fMenuBarItemLayout);
+//    fMenuBar->AddPopup("&Help", fMenuHelp, fMenuBarHelpLayout);
+
+   vframe->AddFrame(fMenuBar, fMenuBarLayout);
+
+  TGHorizontalFrame* hpage=new TGHorizontalFrame(vframe, 800,1200); //horizontal frame. Inside there should be the tab and the canvas
+  mtab=new TGTab(hpage, 1500, 1200); //tab!
+  //  page=new TGVerticalFrame(mtab, 1500,1200);
+
+  cout << "DACS" << endl;
+
+  TGCompositeFrame *tf = mtab->AddTab("DACs");
+  TGVerticalFrame *page=new TGVerticalFrame(tf, 1500,1200);
+  tf->AddFrame(page, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+  dacs=new ctbDacs(page, myDet);
+  i_dacs=i_page++;
+  
+
+  cout << "power " << endl;
+  tf = mtab->AddTab("Power Supplies");
+  page=new TGVerticalFrame(tf, 1500,1200);
+  tf->AddFrame(page, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+  pwrs=new ctbPowers(page, myDet);
+
+  i_pwrs=i_page++;
+
+  cout << "sense " << endl;
+  tf = mtab->AddTab("Sense");
+  page=new TGVerticalFrame(tf, 1500,1200);
+  tf->AddFrame(page, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+  senses=new ctbSlowAdcs(page, myDet);
+
+  i_senses=i_page++;
+
+
+ 
+  cout << "signals " << endl;
+  tf = mtab->AddTab("Signals");
+  page=new TGVerticalFrame(tf, 1500,1200);
+  tf->AddFrame(page, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+  sig=new ctbSignals(page, myDet);
+  sig->Connect("ToggledSignalPlot(Int_t)","ctbMain",this,"setSignalPlot(Int_t)");
+
+  i_sig=i_page++;
+
+  cout << "adcs " << endl;
+  tf = mtab->AddTab("ADCs");
+  page=new TGVerticalFrame(tf, 1500,1200);
+  tf->AddFrame(page, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+  adcs=new ctbAdcs(page, myDet);
+  adcs->Connect("ToggledAdcPlot(Int_t)","ctbMain",this,"setADCPlot(Int_t)");
+  adcs->Connect("AdcEnable(Int_t)","ctbMain",this,"setADCEnable(Int_t)");
+  i_adcs=i_page++;
+
+
+  cout << "pattern" << endl;
+
+  tf = mtab->AddTab("Pattern");
+  page=new TGVerticalFrame(tf, 1500,1200);
+  tf->AddFrame(page, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+  pat=new ctbPattern(page, myDet);
+  pat->Connect("patternFileChanged(const char*)","ctbMain",this,"setPatternFile(const char*)");
+  pat->Connect("patternCompilerChanged(const char*)","ctbMain",this,"setPatternCompiler(const char*)");
+  pat->Connect("analogSamplesChanged(const int)","ctbMain",this,"setAnalogSamples(int)");
+  pat->Connect("digitalSamplesChanged(const int)","ctbMain",this,"setDigitalSamples(int)");
+  pat->Connect("readoutModeChanged(int)","ctbMain",this,"setReadoutMode(int)");
+
+  i_pat=i_page++;
+
+  cout << "acquisition" << endl;
+
+  tf = mtab->AddTab("Acquisition");
+  page=new TGVerticalFrame(tf, 1500,1200);
+  tf->AddFrame(page, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+  acq=new ctbAcquisition(page, myDet);
+
+
+  i_acq=i_page++;
+
+
+  // cout << "actions" << endl;
+  // tf = mtab->AddTab("Actions");
+  // page=new TGVerticalFrame(tf, 1500,1200);
+  // tf->AddFrame(page, new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+  // actions=new ctbActions(page, myDet);
+
+
+  // i_actions=i_page++;
+
+
+
+   cout << "tabs finished" << endl;
+
+  hpage->AddFrame(mtab,new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+
+  vframe->AddFrame(hpage,new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+  
+  AddFrame(vframe,new TGLayoutHints(kLHintsExpandX | kLHintsExpandY, 10,10,10,1));
+  vframe->MapWindow();
+  hpage->MapWindow();
+  mtab->MapWindow();
+  page->MapWindow();
+
+  // Sets window name and shows the main frame
+   cout << "dockabel" << endl;
+   TGDockableFrame *fdock=new TGDockableFrame(hpage);
+   hpage->AddFrame(fdock, new TGLayoutHints(kLHintsBottom | kLHintsCenterX | kLHintsExpandX | kLHintsExpandY, 10,10,10,10));
+   fdock->MapWindow();
+
+   cout << "canvas" << endl;
+//    // Creates widgets of the example
+
+
+   fEcanvas = new TRootEmbeddedCanvas ("Ecanvas",fdock,800,800);//hpage,800,800);
+   //fEcanvas = new TRootEmbeddedCanvas ("Ecanvas",this,800,800);//hpage,800,800);
+  // fEcanvas->Resize();
+  //  fEcanvas->GetCanvas()->Update();
+  //AddFrame(fEcanvas, new TGLayoutHints(kLHintsBottom | kLHintsCenterX | kLHintsExpandX | kLHintsExpandY, 10,10,10,10));
+
+  // // hpage->
+  fdock->AddFrame(fEcanvas, new TGLayoutHints(kLHintsBottom | kLHintsCenterX | kLHintsExpandX | kLHintsExpandY, 10,10,10,10));
+
+
+  fEcanvas->MapWindow();
+
+  acq->setCanvas(getCanvas());
+
+
+
+  hpage->MapSubwindows();
+   mtab->Connect("Selected(Int_t)","ctbMain",this,"tabSelected(Int_t)");
+
+
+
+   cout << "connect mtab" << endl;
+
+  try{  
+   setReadoutMode(pat->getReadoutMode());  
+  } CATCH_DISPLAY ("Could not get readout flags", "ctbPattern::getReadoutMode")
+
+   setADCEnable(adcs->setEnable());
+   setAnalogSamples(pat->getAnalogSamples());
+   setDigitalSamples(pat->getDigitalSamples());
+   
+   tabSelected(0);
+
+   SetWindowName("CTB Gui");
+   MapSubwindows();
+   Resize(1500,1200);
+
+   MapWindow();
+}
+
+void ctbMain::CloseWindow() {
+   gApplication->Terminate();
+}
+
+TCanvas* ctbMain::getCanvas() {
+  return fEcanvas->GetCanvas();
+}
+
+
+
+void ctbMain::HandleMenu(Int_t id)
+{
+   // Handle menu items.
+   
+  
+ 
+
+   switch (id) {
+
+   case 0:   // fMenuFile->AddEntry("Open Alias", im++);
+     cout << "Open Alias" << endl;
+         {
+             static TString dir(".");
+             TGFileInfo fi;
+             //fi.fFileTypes = filetypes;
+             fi.fIniDir    = StrDup(dir);
+             printf("fIniDir = %s\n", fi.fIniDir);
+             new TGFileDialog(gClient->GetRoot(), this, kFDOpen, &fi);
+             printf("Open file: %s (dir: %s)\n", fi.fFilename, fi.fIniDir);
+	     // dir = fi.fIniDir;
+	     if (fi.fFilename)
+	       loadAlias(fi.fFilename);
+          }
+         break;
+
+   case 1: // fMenuFile->AddEntry("Save Alias", im++);
+     cout << "Save Alias" << endl;
+         {
+             static TString dir(".");
+             TGFileInfo fi;
+             //fi.fFileTypes = filetypes;
+             fi.fIniDir    = StrDup(dir);
+             printf("fIniDir = %s\n", fi.fIniDir);
+             new TGFileDialog(gClient->GetRoot(), this, kFDSave, &fi);
+             printf("Save file: %s (dir: %s)\n", fi.fFilename, fi.fIniDir);
+	     // dir = fi.fIniDir;
+	     if (fi.fFilename)
+	       saveAlias(fi.fFilename);
+          }
+         break;
+   case 2: //fMenuFile->AddEntry("Open Parameters", im++);
+     cout << "Open Parameters" << endl;
+         {
+             static TString dir(".");
+             TGFileInfo fi;
+             //fi.fFileTypes = filetypes;
+             fi.fIniDir    = StrDup(dir);
+             printf("fIniDir = %s\n", fi.fIniDir);
+             new TGFileDialog(gClient->GetRoot(), this, kFDOpen, &fi);
+             printf("Open file: %s (dir: %s)\n", fi.fFilename, fi.fIniDir);
+	     // dir = fi.fIniDir;
+	     if (fi.fFilename)
+	       loadParameters(fi.fFilename);
+          }
+         break;
+
+   case 3: // fMenuFile->AddEntry("Open Configuration", im++);
+     cout << "Open configuration" << endl;
+         {
+             static TString dir(".");
+             TGFileInfo fi;
+             //fi.fFileTypes = filetypes;
+             fi.fIniDir    = StrDup(dir);
+             printf("fIniDir = %s\n", fi.fIniDir);
+             new TGFileDialog(gClient->GetRoot(), this, kFDOpen, &fi);
+             printf("Open file: %s (dir: %s)\n", fi.fFilename, fi.fIniDir);
+	     // dir = fi.fIniDir;
+	     if (fi.fFilename)
+	       loadConfiguration(fi.fFilename);
+          }
+         break;
+ 
+   case 4: //fMenuFile->AddEntry("Open Pattern", im++);
+     cout << "Open pattern" << endl;
+         {
+             static TString dir(".");
+             TGFileInfo fi;
+             //fi.fFileTypes = filetypes;
+             fi.fIniDir    = StrDup(dir);
+             printf("fIniDir = %s\n", fi.fIniDir);
+             new TGFileDialog(gClient->GetRoot(), this, kFDOpen, &fi);
+             printf("Open file: %s (dir: %s)\n", fi.fFilename, fi.fIniDir);
+	     // dir = fi.fIniDir;
+	     if (fi.fFilename)
+	       loadParameters(fi.fFilename);
+          }
+     break;
+
+   case 5:   //fMenuFile->AddEntry("Save Pattern", im++);
+     cout << "Save pattern" << endl;
+         {
+             static TString dir(".");
+             TGFileInfo fi;
+             //fi.fFileTypes = filetypes;
+             fi.fIniDir    = StrDup(dir);
+             printf("fIniDir = %s\n", fi.fIniDir);
+             new TGFileDialog(gClient->GetRoot(), this, kFDSave, &fi);
+             printf("Open file: %s (dir: %s)\n", fi.fFilename, fi.fIniDir);
+	     // dir = fi.fIniDir;
+	     if (fi.fFilename)
+	       savePattern(fi.fFilename);
+          }
+         break;
+
+   case 6: //  fMenuFile->AddEntry("Exit", im++);
+     CloseWindow();
+
+      default:
+         printf("Menu item %d selected\n", id);
+         break;
+   }
+}
+
+
+
+int  ctbMain::setADCPlot(Int_t i) {
+
+  //  cout << "ADC " << i << " plot or color toggled" << endl;
+  //  acq->setGraph(i,adcs->getGraph(i));
+  acq->setGraph(i,adcs->getEnabled(i),adcs->getColor(i));
+  return -1;
+}
+
+
+int  ctbMain::setSignalPlot(Int_t i) {
+
+  //  cout << "ADC " << i << " plot or color toggled" << endl;
+  //  acq->setGraph(i,adcs->getGraph(i));
+  acq->setBitGraph(i,sig->getPlot(i),sig->getColor(i));
+  return -1;
+}
+
+
+
+void  ctbMain::loadConfiguration(string fname) {
+  try{
+    myDet->loadConfig(fname);
+  } CATCH_DISPLAY ("Could not load config.", "ctbMain::loadConfiguration")
+}
+
+void  ctbMain::loadParameters(string fname) {
+  try{
+    myDet->loadParameters(fname);
+  } CATCH_DISPLAY ("Could not load parameters.", "ctbMain::loadParameters")
+}
+
+void  ctbMain::savePattern(string fname) {
+  try{
+    myDet->savePattern(fname);
+  } CATCH_DISPLAY ("Could not save pattern.", "ctbMain::savePattern")
+}
+
+
+
+int  ctbMain::loadAlias(string fname) {
+
+
+  string line;
+  char aaaa[1000];
+  int i;
+  ifstream myfile (fname.c_str());
+  if (myfile.is_open())
+  {
+    while ( getline (myfile,line) )
+    {
+      // cout << line ;
+      if (sscanf(line.c_str(),"BIT%d",&i)>0) {
+	//cout << "*******" << line<< endl;
+	sig->setSignalAlias(line);
+      // cout << line ;
+      } else if (sscanf(line.c_str(),"DAC%d",&i)>0) {
+	dacs->setDacAlias(line);
+	//	cout << "+++++++++" << line<< endl;
+      } else if (sscanf(line.c_str(),"ADC%d",&i)>0) {
+	adcs->setAdcAlias(line);
+	//	cout << "---------" << line<< endl;
+      }      //  else
+      //	cout << "<<<<<<<" << line << endl;
+      else if (sscanf(line.c_str(),"PAT%s",aaaa)>0) {
+	pat->setPatternAlias(line);
+	//	cout << "---------" << line<< endl;
+      }	else if (sscanf(line.c_str(),"V%s",aaaa)>0) {
+	    if (pwrs)	pwrs->setPwrAlias(line);
+	//	cout << "+++++++++" << line<< endl;
+      } else if (sscanf(line.c_str(),"SENSE%d",&i)>0) {
+	if (senses) senses->setSlowAdcAlias(line);
+	//	cout << "+++++++++" << line<< endl;
+      } 
+      
+    }
+    myfile.close();
+  }
+
+  else cout << "Unable to open file"; 
+
+  return 0;
+
+}
+
+
+
+
+
+int  ctbMain::saveAlias(string fname) {
+
+
+  string line;
+  ofstream myfile (fname.c_str());
+  if (myfile.is_open())
+  {
+    //while ( getline (myfile,line) )
+    // {
+      // cout << line ;
+      //if (sscanf(line.c_str(),"BIT%d",&i)>0) {
+	//cout << "*******" << line<< endl;
+    myfile << sig->getSignalAlias();
+      // cout << line ;
+    //  } else if (sscanf(line.c_str(),"DAC%d",&i)>0) {
+    myfile << dacs->getDacAlias();
+    if (pwrs) myfile << pwrs->getPwrAlias();
+    if (senses) myfile << senses->getSlowAdcAlias();
+	//	cout << "+++++++++" << line<< endl;
+    //  } else if (sscanf(line.c_str(),"ADC%d",&i)>0) {
+    myfile << adcs->getAdcAlias();
+	//	cout << "---------" << line<< endl;
+    //  }      //  else
+      //	cout << "<<<<<<<" << line << endl;
+    myfile << pat->getPatternAlias();
+      
+    //}
+    myfile.close();
+  }
+
+  else cout << "Unable to open file"; 
+
+  return 0;
+
+}
+
+
+
+
+
+
+
+
+
+
+
+void ctbMain::tabSelected(Int_t i) {
+
+  //  cout << "Selected tab " << i << endl;
+  // cout << "Current tab is " <<  mtab->GetCurrent() << endl;
+
+  if (i==i_dacs) dacs->update();
+  else if (i==i_pwrs) pwrs->update();
+  else if (i==i_senses) ;//senses->update();
+ else if (i==i_sig) sig->update();
+ else if (i==i_adcs) adcs->update();
+ else if (i==i_pat) pat->update();
+ else if (i==i_acq) acq->update();
+ else if (i==i_acq) acq->update();
+  // else if (i==i_actions) actions->update();
+ else cout << "Unknown tab " << i << endl;
+ 
+
+}
+
+void ctbMain::setPatternFile(const char* t) {
+  acq->setPatternFile(t);
+
+}
+
+void ctbMain::setPatternCompiler(const char* t) {
+  acq->setPatternCompiler(t);
+
+
+}
+
+void ctbMain::setAnalogSamples(const int n) {
+  acq->setAnalogSamples(n);
+
+
+}
+
+void ctbMain::setDigitalSamples(const int n) {
+  acq->setDigitalSamples(n);
+
+
+}
+
+void ctbMain::setReadoutMode(int flags) {
+  acq->setReadoutMode(flags);
+}
+
+void ctbMain::setADCEnable(Int_t reg){
+  acq->setADCEnable(reg);
+}

ctbGui/ctbMain.h

@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#ifndef CTBMAIN_H
+#define CTBMAIN_H
+#include <TGFrame.h>
+
+
+class TRootEmbeddedCanvas;
+class TGButtonGroup;
+class TGVerticalFrame;
+class TGHorizontalFrame;
+class TGTextEntry;
+class TGLabel;
+class TGNumberEntry;
+class TH2F;
+class TGComboBox;
+class TGCheckButton;
+
+class   THStack;
+class   TGraphErrors;
+class  TGTextButton;
+class  TGTab;
+
+class   TGMenuBar;
+class   TGPopupMenu;
+class   TGDockableFrame;
+class TGLayoutHints;
+class TGCanvas;
+class TCanvas;
+
+class   ctbDacs;
+class   ctbSlowAdcs;
+class   ctbPowers;
+
+ 
+class  ctbSignals;
+
+namespace sls
+{
+   class Detector;
+};
+
+class  ctbPattern;
+class  ctbAdcs;
+class  ctbAcquisition;
+//class  ctbActions;
+
+#include <string>
+using namespace std;
+
+class ctbMain : public TGMainFrame { 
+private:
+
+
+  sls::Detector *myDet;
+
+
+
+   TRootEmbeddedCanvas *fEcanvas;
+   TRootEmbeddedCanvas *fModulecanvas;
+   TGButtonGroup *br;
+   
+   TGTab *mtab;
+
+   
+   ctbDacs *dacs;
+   int i_dacs;
+
+   ctbPowers *pwrs;
+   int i_pwrs;
+
+   ctbSlowAdcs *senses;
+   int i_senses;
+
+ 
+  ctbSignals *sig;
+  int i_sig;
+
+
+  ctbAdcs *adcs;
+  int i_adcs;
+  
+
+  ctbPattern *pat;
+  int i_pat;
+
+  ctbAcquisition *acq;
+  int i_acq;
+
+  // ctbActions *actions;
+  int i_actions;
+
+   TGDockableFrame    *fMenuDock;
+
+   TGMenuBar          *fMenuBar;
+   TGPopupMenu        *fMenuFile, *fMenuTest, *fMenuView, *fMenuHelp;
+   TGPopupMenu        *fCascadeMenu, *fCascade1Menu, *fCascade2Menu;
+   TGPopupMenu        *fMenuNew1, *fMenuNew2;
+   TGLayoutHints      *fMenuBarLayout, *fMenuBarItemLayout, *fMenuBarHelpLayout;
+   TGCanvas *myCanvas;
+
+
+public:
+   ctbMain(const TGWindow *p, sls::Detector *det);
+
+
+   int  loadAlias(string fname);
+   int  saveAlias(string fname);
+   void  loadParameters(string fname);
+   void  savePattern(string fname);
+   void  loadConfiguration(string fname);
+   void tabSelected(Int_t);
+   int setADCPlot(Int_t);
+   int setSignalPlot(Int_t);
+   void CloseWindow();
+
+   void setPatternFile(const char* t);
+
+   void setPatternCompiler(const char* t);
+   void setAnalogSamples(const int);
+   void setDigitalSamples(const int);
+   void setReadoutMode(int);
+   void setADCEnable(Int_t);
+
+   void HandleMenu(Int_t);
+   TCanvas* getCanvas();
+   ClassDef(ctbMain,0)
+};
+
+#endif

ctbGui/ctbPattern.h

@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#ifndef CTBPATTERN_H
+#define CTBPATTERN_H
+#include  <TGFrame.h>
+
+
+#define NLOOPS 3
+#define NWAITS 3
+#define NADCS 32
+#define PATLEN 1024
+
+class TRootEmbeddedCanvas;
+class TGButtonGroup;
+class TGVerticalFrame;
+class TGHorizontalFrame;
+class TGTextEntry;
+class TGLabel;
+class TGNumberEntry;
+class TH2F;
+class TGComboBox;
+class TGCheckButton;
+class TGTextEntry;
+class TGCheckButton;
+
+class   THStack;
+class   TGraphErrors;
+class energyCalibration;
+class  TGTextButton;
+class  TGTab;
+
+namespace sls
+{
+   class Detector;
+};
+
+
+#include <string>
+using namespace std;
+
+
+
+class ctbLoop : public TGHorizontalFrame {
+ 
+
+ private:
+
+   TGNumberEntry *eLoopStartAddr; 
+   TGNumberEntry *eLoopStopAddr; 
+   TGNumberEntry *eLoopNumber; 
+
+   int id;
+
+   sls::Detector *myDet;
+
+ public:
+   ctbLoop(TGGroupFrame *page, int i,sls::Detector *det);
+   
+   void setNLoops();
+   void update();
+
+   ClassDef(ctbLoop,0)
+     };
+
+class ctbWait : public TGHorizontalFrame {
+ 
+
+ private:
+
+   TGNumberEntry *eWaitAddr; 
+   TGNumberEntry *eWaitTime; 
+
+   int id;
+
+   sls::Detector *myDet;
+
+ public:
+   ctbWait(TGGroupFrame *page, int i,sls::Detector *det);
+   
+   void setWaitTime();
+   void update();
+
+   ClassDef(ctbWait,0)
+     };
+
+
+
+
+
+
+
+class ctbPattern : public TGGroupFrame {
+private:
+   
+
+   TGNumberEntry *eAdcClkFreq;
+   TGNumberEntry *eRunClkFreq;
+   TGNumberEntry *eDBitClkFreq;
+   TGNumberEntry *eAdcClkPhase;
+   TGNumberEntry *eDBitClkPhase;
+   //TGNumberEntry *eRunClkPhase;
+
+   TGNumberEntry *eStartAddr;
+   TGNumberEntry *eStopAddr;
+   TGNumberEntry *eFrames;
+   TGNumberEntry *ePeriod;
+   TGNumberEntry *eTriggers;
+   // TGNumberEntry *eMeasurements;
+   TGNumberEntry *eAdcPipeline;
+   TGNumberEntry *eDBitPipeline;
+   
+   ctbLoop *eLoop[NLOOPS];
+   ctbWait *eWait[NWAITS];
+
+   TGTextEntry *patternCompiler;
+   TGTextEntry *patternFile;
+   
+   TGTextButton *browseCompiler;
+   TGTextButton *browseFile;
+   
+
+   TGNumberEntry *eAnalogSamples;
+   TGNumberEntry *eDigitalSamples;
+
+  TGCheckButton *cbAnalog;
+  TGCheckButton *cbDigital;
+  
+   char pat[PATLEN*8];
+
+   sls::Detector *myDet;
+
+public:
+
+   ctbPattern(TGVerticalFrame *page, sls::Detector *det);
+
+   void update();
+   void setAdcFreq();
+   void setRunFreq();
+   void setDBitFreq();
+   void setAdcPhase();
+   void setDBitPhase();
+   // void setRunPhase();
+   void setAdcPipeline();
+   void setDBitPipeline();
+   void setFrames();
+   void setTriggers();
+   // void setMeasurements();
+   void setPeriod();
+
+   
+   void chooseCompiler();
+   void choosePattern();
+
+   string getCompiler();
+   string getPatternFile();
+   
+   void setPatternAlias(string);
+   string getPatternAlias();
+
+
+   int getAnalogSamples();
+   void  setAnalogSamples();
+   int getDigitalSamples();
+   void  setDigitalSamples();
+   void  setReadoutMode(Bool_t);
+   int  getReadoutMode();
+
+
+   void setFile();
+   void setCompiler();
+   void patternFileChanged(const char*);
+   void patternCompilerChanged(const char*);
+   void analogSamplesChanged(const int t);
+   void digitalSamplesChanged(const int t);
+   void readoutModeChanged(int);
+
+
+   ClassDef(ctbPattern,0)
+};
+
+#endif

ctbGui/ctbPowers.cpp

@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#include  <TGFrame.h>
+
+
+#include <TGButtonGroup.h>
+#include <TGNumberEntry.h>
+#include <TGLabel.h>
+#include <TList.h>
+
+#include <stdio.h>
+#include <iostream>
+#include <fstream>
+
+#include "ctbDefs.h"
+#include "ctbDacs.h"
+#include "ctbPowers.h"
+#include "sls/Detector.h"
+#include "sls/sls_detector_defs.h"
+
+using namespace std;
+
+
+
+ctbPower::ctbPower(TGGroupFrame* f, int i,  sls::Detector* d)
+  : ctbDac(f, i, d) 
+{
+  cout << "****************************************************************power " << i << endl;
+     dacsUnit->SetOn(kTRUE); 
+     dacsUnit->SetEnabled(kFALSE);
+
+     switch(i) {
+     case slsDetectorDefs::V_POWER_IO: 
+     	 dacsLabel->SetText("VIO"); 
+     	 break; 
+     case slsDetectorDefs::V_POWER_A: 
+     	 dacsLabel->SetText("VA"); 
+     	 break;  
+     case slsDetectorDefs::V_POWER_B: 
+     	 dacsLabel->SetText("VB"); 
+     	 break;   
+     case slsDetectorDefs::V_POWER_C: 
+     	 dacsLabel->SetText("VC");
+     	 break;    
+     case slsDetectorDefs::V_POWER_D: 
+     	 dacsLabel->SetText("VD");
+     	 break;      
+     case slsDetectorDefs::V_POWER_CHIP: 
+     	 dacsLabel->SetText("VCHIP"); 
+     	 dacsLabel->SetEnabled(kFALSE);
+     	 break;    
+     default: 
+     	 dacsLabel->SetText("Bad index"); 
+     	 break; 
+     };
+     
+
+     TGTextEntry *e=dacsEntry->TGNumberEntry::GetNumberEntry();
+     e->Disconnect 	("ReturnPressed()");
+     e->Disconnect 	("ValueSet(Long_t)");
+     
+     e->Connect("ReturnPressed()","ctbPower",this,"setValue()");
+     dacsEntry->Connect("ValueSet(Long_t)","ctbPower",this,"setValue(Long_t)");
+ };
+
+
+string ctbPower::getLabel() {
+
+  ostringstream line;
+  switch (id) {
+     case slsDetectorDefs::V_POWER_IO: 
+	 line << "VIO"; 
+	 break; 
+     case slsDetectorDefs::V_POWER_A: 
+	 line << "VA"; 
+	 break;  
+     case slsDetectorDefs::V_POWER_B: 
+	 line << "VB"; 
+	 break;   
+     case slsDetectorDefs::V_POWER_C: 
+	 line << "VC"; 
+	 break;    
+     case slsDetectorDefs::V_POWER_D: 
+	 line << "VD"; 
+	 break;      
+     case slsDetectorDefs::V_POWER_CHIP: 
+	 line << "VCHIP"; 
+	 break;    
+     default:  
+	 line << "VBAD"; 
+	 break; 
+
+  }
+  line << " " <<  dacsLabel->GetText() << endl;
+  return line.str();
+}
+
+void ctbPower::setValue(Long_t a) {ctbPower::setValue();}
+
+void ctbPower::setValue() {
+  cout << "***************************Setting power " << dacsEntry->GetIntNumber() << " " << id << " " << 1 << endl;
+ 
+  try {
+    myDet->setVoltage(static_cast<slsDetectorDefs::dacIndex>(id), dacsEntry->GetIntNumber());
+  } CATCH_DISPLAY ("Could not set power " + to_string(id) + ".", "ctbPower::setValue")
+
+  getValue();
+}
+
+
+int ctbPower::getValue() {
+  try {
+
+  int val = myDet->getVoltage(static_cast<slsDetectorDefs::dacIndex>(id)).tsquash("Different values");
+  cout << "****************************Getting power " << val << " " << id << " " << 1 << endl;
+
+  dacsValue->SetText(to_string(val).c_str());
+  if (val > 0) {
+    if (id != static_cast<int>(slsDetectorDefs::V_POWER_CHIP))
+      dacsLabel->SetOn(kTRUE);
+  } else {
+    dacsLabel->SetOn(kFALSE);
+  }
+
+  return val;
+
+  } CATCH_DISPLAY ("Could not get power " + to_string(id) + ".", "ctbPower::getValue") 
+
+  return -1;
+}
+
+
+
+ctbPowers::ctbPowers(TGVerticalFrame* page, sls::Detector* det)   : TGGroupFrame(page,"Power Supplies",kVerticalFrame) , myDet(det){
+
+
+  SetTitlePos(TGGroupFrame::kLeft);
+  page->AddFrame(this,new TGLayoutHints( kLHintsTop | kLHintsExpandX , 10,10,10,10));
+  MapWindow();
+  
+  // cout << "window mapped " << endl;
+
+  for (int idac=0; idac<NPOWERS; idac++) {
+     dacs[idac]=new ctbPower(this, slsDetectorDefs::V_POWER_A+idac, myDet);
+
+  }
+}
+
+
+int ctbPowers::setPwrAlias(string line) {
+
+  int is=-1;
+  char tit[100];
+
+  if (sscanf(line.c_str(),"VA %s",tit)) {
+    dacs[0]->setLabel(tit,1);
+    is=0;
+  }
+
+  if (sscanf(line.c_str(),"VB %s",tit)) {
+    dacs[1]->setLabel(tit,1);
+    is=1;
+  }
+
+  if (sscanf(line.c_str(),"VC %s",tit)) {
+    dacs[2]->setLabel(tit,1);
+    is=2;
+  }
+
+  if (sscanf(line.c_str(),"VD %s",tit)) {
+    dacs[3]->setLabel(tit,1);
+    is=3;
+  }
+
+  if (sscanf(line.c_str(),"VIO %s",tit)) {
+    dacs[4]->setLabel(tit,1);
+    is=4;
+  }
+
+  if (sscanf(line.c_str(),"VCHIP %s",tit)) {
+    dacs[5]->setLabel(tit,1);
+    is=5;
+  }
+    
+  return is;
+
+}
+
+string ctbPowers::getPwrAlias() {
+
+  ostringstream line;
+
+  for (int i=0; i<NPOWERS; i++)
+    line << dacs[i]->getLabel() << endl;
+  return line.str();
+
+}
+
+
+
+
+string ctbPowers::getPwrParameters() {
+
+  ostringstream line;
+  line << "v_a" << " " << dacs[0]->getValue() << " mv" << endl;
+  line << "v_b" << " " << dacs[1]->getValue() << " mv" << endl;
+  line << "v_c" << " " << dacs[2]->getValue() << " mv" << endl;
+  line << "v_d" << " " << dacs[3]->getValue() << " mv" << endl;
+  line << "v_io" << " " << dacs[4]->getValue() << " mv" << endl;
+  line << "v_chip" << " " << dacs[5]->getValue() << " mv" << endl;
+  // for (int i=0; i<POWERS; i++) {
+  //   //line << "dacs:" << i << " " << dacs[i]->getValue << endl;
+  //   line << "dac:" << i << " " << dacs[i]->getValue() << endl;
+  // } 
+  return line.str();
+}
+
+
+
+void  ctbPowers::update() {
+  for (int idac=0; idac<NPOWERS; idac++) {
+    dacs[idac]->getValue();
+
+  }
+}

ctbGui/ctbPowers.h

@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#ifndef CTBPOWERS_H
+#define CTBPOWERS_H
+
+#include  <TGFrame.h>
+
+#define NPOWERS 6
+
+
+
+class TGTextEntry;
+class TGLabel;
+class TGNumberEntry;
+class TGCheckButton;
+
+
+
+
+namespace sls
+{
+   class Detector;
+};
+
+#include <string>
+using namespace std;
+
+
+class ctbPower : public ctbDac {
+
+  
+
+
+ public:
+
+  ctbPower(TGGroupFrame* f, int i, sls::Detector* d);
+
+    string getLabel();
+
+    int getValue();
+    void setValue();
+    void setValue(Long_t);
+
+   ClassDef(ctbPower,0)
+};
+
+
+class ctbPowers : public TGGroupFrame 
+{
+ private:
+  
+   ctbPower *dacs[NPOWERS]; 
+
+   sls::Detector* myDet; 
+
+public:
+   //ctbPowers();
+    ctbPowers(TGVerticalFrame*, sls::Detector*);
+
+    int setPwrAlias(string); 
+    string getPwrAlias(); 
+    string getPwrParameters(); 
+
+    void update(); 
+
+    ClassDef(ctbPowers,0)
+};
+
+#endif

ctbGui/ctbSignals.cpp

@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#include <TApplication.h>
+#include <TGClient.h>
+#include <TCanvas.h>
+#include <TF1.h>
+#include <TRandom.h>
+#include <TGButton.h>
+#include <TRootEmbeddedCanvas.h>
+#include <TGButtonGroup.h>
+#include <TGNumberEntry.h>
+#include <TGLabel.h>
+#include <TList.h>
+#include <TGFileDialog.h>
+#include <TGComboBox.h>
+#include <TH2F.h>
+#include <TColor.h>
+#include <TH1F.h>
+#include <TGraphErrors.h>
+#include <THStack.h>
+#include <TGTab.h>
+
+#include <stdio.h>
+#include <iostream>
+#include <fstream>
+#include <TGButton.h>
+#include <TRootEmbeddedCanvas.h>
+#include <TGButtonGroup.h>
+#include <TGNumberEntry.h>
+#include <TGLabel.h>
+#include <stdio.h>
+#include <iostream>
+#include <fstream>
+#include <TColor.h>
+#include <TGColorSelect.h>
+
+
+#include "ctbSignals.h"
+#include "ctbDefs.h"
+#include "sls/Detector.h"
+
+using namespace std;
+
+
+
+//#define DEFAULTFN "run_0.encal"
+
+
+ctbSignal::ctbSignal(TGFrame *page, int i,  sls::Detector *det)
+  : TGHorizontalFrame(page, 800,50), myDet(det), id(i), hsig(NULL) {
+
+
+  TGHorizontalFrame *hframe=this;
+  char tit[100];
+
+
+   
+   sprintf(tit, "BIT%d ",id);
+
+   sLabel= new TGLabel(hframe, tit);
+   hframe->AddFrame( sLabel,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   sLabel->MapWindow();
+   sLabel->SetTextJustify(kTextLeft);
+
+
+
+   sOutput= new TGCheckButton(hframe, "Out");
+   hframe->AddFrame( sOutput,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   sOutput->MapWindow();
+
+ 
+   sOutput->Connect("Toggled(Bool_t)","ctbSignal",this,"ToggledOutput(Bool_t)");
+
+   sDbitList= new TGCheckButton(hframe, "DB List");
+   hframe->AddFrame( sDbitList,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   sDbitList->MapWindow();
+
+   sDbitList->Connect("Toggled(Bool_t)","ctbSignal",this,"ToggledDbitList(Bool_t)");
+
+
+   sPlot= new TGCheckButton(hframe, "Plot");
+   hframe->AddFrame( sPlot,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   sPlot->MapWindow();
+
+   sPlot->Connect("Toggled(Bool_t)","ctbSignal",this,"ToggledPlot(Bool_t)");
+   
+   fColorSel = new TGColorSelect(hframe, id+1, 0);
+   fColorSel->Connect("ColorSelected(Pixel_t)","ctbSignal",this,"ColorChanged(Pixel_t)");
+   hframe->AddFrame(fColorSel, new TGLayoutHints(kLHintsTop |
+                          kLHintsLeft, 2, 0, 2, 2));
+   
+
+   fColorSel->SetColor(TColor::Number2Pixel(id+1));
+
+   
+   ToggledOutput(kFALSE);
+
+  
+   ToggledPlot(kFALSE);
+
+  //  if (id==63) {
+//      sOutput->SetOn(kTRUE);
+//      sOutput->SetEnabled(kFALSE);
+//    }
+// #ifdef CTB
+//    if (id==62) {
+//      sOutput->SetOn(kTRUE);
+//      sOutput->SetEnabled(kFALSE);
+//    }
+
+//    // if (id>=32 && id<48)
+//    //   fixOutput(1);
+//    // else if (id>=48 && id<64)
+//    //   fixOutput(0);
+
+// #endif
+}
+int ctbSignal::setSignalAlias(char *tit, int plot, int col) {
+
+  if (tit)
+    sLabel->SetText(tit);
+
+  if (plot>0) {
+      sPlot->SetOn(kTRUE,kTRUE); 
+  } else if (plot==0)
+      sPlot->SetOn(kFALSE,kTRUE);
+    
+  if (col>=0)
+    fColorSel->SetColor(col);//TColor::Number2Pixel(col+1));
+
+  fColorSel->SetEnabled(sPlot->IsOn());
+  return 0;
+
+}
+
+string ctbSignal::getSignalAlias() {
+  
+
+  ostringstream oss;
+  oss << "BIT" << dec << id << " " << sLabel->GetText()->Data() << " " << sPlot->IsOn() << hex << " " << fColorSel->GetColor() << endl;
+  return oss.str();
+
+
+
+
+}
+int ctbSignal::setOutput(Long64_t r) {
+
+
+  //  cout << hex << r << dec <<endl;
+
+  Long64_t mask=((Long64_t)1<<id);
+
+  if (r&mask)
+      sOutput->SetOn(kTRUE,kTRUE);
+  else 
+      sOutput->SetOn(kFALSE,kTRUE);
+    
+  return sOutput->IsOn();
+
+}
+
+int ctbSignal::fixOutput(int i) {
+
+  if (i) {
+    sPlot->SetOn(kFALSE);
+    //sClock->SetOn(kFALSE,kTRUE);
+    sOutput->SetOn(kTRUE);
+    //   sPlot->SetEnabled(kFALSE);
+    //  sClock->SetEnabled(kTRUE);
+  } else {
+    sOutput->SetOn(kFALSE,kTRUE);
+    //  sClock->SetOn(kFALSE);  
+    // sClock->SetEnabled(kFALSE);
+    sPlot->SetEnabled(kTRUE);
+  }
+  sOutput->SetEnabled(kFALSE);
+  return 0;
+
+}
+
+int ctbSignal::setDbitList(Long64_t r) {
+
+  if (r)
+      sDbitList->SetOn(kTRUE,kFALSE);
+  else 
+      sDbitList->SetOn(kFALSE,kFALSE);
+    
+  return sDbitList->IsOn();
+
+}
+
+int ctbSignal::isDbitList() { return sDbitList->IsOn();}
+int ctbSignal::isOutput() { return sOutput->IsOn();}
+int ctbSignal::isPlot() { return sPlot->IsOn();}
+Pixel_t ctbSignal::getColor(){return fColorSel->GetColor();}
+
+void ctbSignal::ToggledOutput(Bool_t b) {
+  ToggledSignalOutput(id);
+  if (b) {
+    // sClock->SetEnabled(kTRUE);
+    sPlot->SetOn(kFALSE);
+    // sPlot->SetEnabled(kFALSE);
+    fColorSel->SetEnabled(kFALSE);
+  } else {
+    // sClock->SetEnabled(kFALSE);
+    // sClock->SetOn(kFALSE);
+    sPlot->SetEnabled(kTRUE);
+    if ( sPlot->IsOn())
+      fColorSel->SetEnabled(kFALSE);
+    else
+      fColorSel->SetEnabled(kTRUE);
+  }
+
+
+}
+
+void ctbSignal::ToggledDbitList(Bool_t b){
+  Long_t mask=id;
+  ToggledSignalDbitList(mask);
+}
+
+
+void ctbSignal::ToggledPlot(Bool_t b){
+  Long_t mask=b<<id;
+  ToggledSignalPlot(mask);
+  fColorSel->SetEnabled(b);
+}
+
+void ctbSignal::ColorChanged(Pixel_t p){
+  ToggledSignalPlot(id);
+}
+
+
+void ctbSignal::ToggledSignalOutput(Int_t b) {
+  cout << "Toggle signal " << id << " " << b  << " " <<  sOutput->IsOn() <<endl;;
+  Emit("ToggledSignalOutput(Int_t)", id);
+}
+
+void ctbSignal::ToggledSignalDbitList(Int_t b){
+  cout << "Toggle dbitlist " << id << " " << b << endl;;
+  Emit("ToggledSignalDbitList(Int_t)", id);
+}
+
+void ctbSignal::ToggledSignalPlot(Int_t b){
+  Emit("ToggledSignalPlot(Int_t)", id);
+}
+
+
+ctbSignals::ctbSignals(TGVerticalFrame *page, sls::Detector *det)
+  : TGGroupFrame(page,"IO Signals",kVerticalFrame), myDet(det) {
+
+
+  SetTitlePos(TGGroupFrame::kLeft);
+  page->AddFrame(this,new TGLayoutHints( kLHintsTop | kLHintsExpandX , 10,10,10,10));
+  MapWindow();
+  
+
+  TGHorizontalFrame *hframe;
+ 
+  TGHorizontalFrame* hhframe=new TGHorizontalFrame(this, 800,800);
+  AddFrame(hhframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+  hhframe->MapWindow();
+
+  TGVerticalFrame *vframe;
+
+
+
+
+  int idac=0;
+  for (idac=0; idac<NSIGNALS; idac++) {
+    if (idac%((NSIGNALS+2)/2)==0) {
+    vframe=new TGVerticalFrame(hhframe, 400,800);
+     hhframe->AddFrame(vframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+    vframe->MapWindow();
+    }
+
+
+    signals[idac]=new ctbSignal(vframe,idac,myDet);
+    signals[idac]->Connect("ToggledSignalOutput(Int_t)","ctbSignals",this,"ToggledOutReg(Int_t)");
+    signals[idac]->Connect("ToggledSignalDbitList(Int_t)","ctbSignals",this,"ToggledDbitList(Int_t)");
+    signals[idac]->Connect("ToggledSignalPlot(Int_t)","ctbSignals",this,"ToggledPlot(Int_t)");
+ 
+    vframe->AddFrame(signals[idac],new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+    signals[idac]->MapWindow();
+
+
+  }
+
+  hframe=new TGHorizontalFrame(vframe, 800,50);
+  vframe->AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+  hframe->MapWindow();
+
+
+  TGLabel *label= new TGLabel(hframe, "IO Control Register: ");
+   hframe->AddFrame(label,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   label->MapWindow();
+   label->SetTextJustify(kTextLeft);
+
+
+   eIOCntrlRegister = new TGNumberEntry(hframe, 0, 16,999, TGNumberFormat::kNESHex,
+                                               TGNumberFormat::kNEANonNegative, 
+                                               TGNumberFormat::kNELNoLimits);
+
+  hframe->AddFrame(eIOCntrlRegister,new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 1, 1, 1, 1));
+   eIOCntrlRegister->MapWindow();
+   eIOCntrlRegister->Resize(150,30);
+
+
+
+
+    hframe=new TGHorizontalFrame(vframe, 800,50);
+    vframe->AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+    hframe->MapWindow();
+   
+
+   label= new TGLabel(hframe, "DBit Offset: ");
+   hframe->AddFrame(label,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 1, 1, 1, 1));
+   label->MapWindow();
+   label->SetTextJustify(kTextLeft);
+
+
+   eDbitOffset = new TGNumberEntry(hframe, 0, 9,999, TGNumberFormat::kNESInteger,
+                                               TGNumberFormat::kNEANonNegative, 
+                                               TGNumberFormat::kNELNoLimits);
+
+  hframe->AddFrame(eDbitOffset,new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 1, 1, 1, 1));
+   eDbitOffset->MapWindow();
+   eDbitOffset->Resize(150,30);
+   
+ 
+  TGTextEntry *e= eDbitOffset->TGNumberEntry::GetNumberEntry();
+    e->Connect("ReturnPressed()","ctbSignals",this,"setDbitOffset()");
+
+    e->Connect("ValueSet(Long_t)","ctbSignals",this,"setDbitOffset(Long_t)");
+}
+
+
+
+
+int ctbSignals::setSignalAlias(string line) {
+
+  int is=-1, plot=0, col=-1;
+  char tit[100];
+  int narg=sscanf(line.c_str(),"BIT%d %s %d %d",&is,tit,&plot,&col);
+  if (narg<2)
+    return -1;
+  if (is>=0 && is<NIOSIGNALS) {
+    signals[is]->setSignalAlias(tit,plot,col);
+  }
+  return is;
+
+}
+
+string ctbSignals::getSignalAlias() {
+
+  ostringstream oss;
+  for (int is=0; is<NIOSIGNALS; is++)
+    oss << signals[is]->getSignalAlias() << endl;
+
+
+    return oss.str();
+
+}
+
+
+void ctbSignals::update() {
+  try {
+
+    Long64_t oreg = static_cast<Long64_t>(myDet->getPatternIOControl().tsquash("Different values"));
+    cout << hex << oreg << dec << endl;
+
+    for (int idac=0; idac<NIOSIGNALS; idac++) {
+      signals[idac]->setOutput(oreg);
+    }
+
+  } CATCH_DISPLAY ("Could not get patternIOcontrol.", "ctbSignals::update")
+
+  if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
+    // enable all
+    for (int is=0; is<64; is++) {
+      signals[is]->setDbitList(1);
+    } 
+    eDbitOffset->SetNumber(0);
+  } 
+  
+  // ctb
+  else {
+    try {
+
+      auto dbitlist = myDet->getRxDbitList().tsquash("Different values");
+      // enable all
+      if (dbitlist.empty()) {
+        for (int is=0; is<64; is++) {
+          signals[is]->setDbitList(1);
+        } 
+      }
+      else {
+        // disable all
+        for (int is=0; is<64; is++) {
+          signals[is]->setDbitList(0);
+        }
+        // enable selected
+        for (const auto &value : dbitlist)  {
+          signals[value]->setDbitList(1);
+        }
+      }
+
+    } CATCH_DISPLAY ("Could not get receiver dbit list.", "ctbSignals::update")
+
+    try {
+      auto val = myDet->getRxDbitOffset().tsquash("Different values");
+      eDbitOffset->SetNumber(val);
+    } CATCH_DISPLAY ("Could not get receiver dbit offset.", "ctbSignals::update")
+  }
+}
+
+
+string ctbSignals::getSignalParameters() {
+
+  try {
+
+    auto val = myDet->getPatternIOControl().tsquash("Different values");
+    ostringstream line;
+    line <<  "patioctrl " << hex << val << dec << endl;
+    return line.str();
+
+  } CATCH_DISPLAY ("Could not get patternIOcontrol.", "ctbSignals::getSignalParameters")
+
+  return ("");
+}
+
+void ctbSignals::ToggledOutReg(Int_t mask) {
+  try {
+
+    Long64_t oreg = static_cast<Long64_t>(myDet->getPatternIOControl().tsquash("Different values"));
+    Long64_t m=((Long64_t)1)<<mask;
+    cout << dec << sizeof(Long64_t) << " " << mask << " " << hex << m << " ioreg " << oreg;
+
+    if (signals[mask]->isOutput()) {
+      cout <<  " or " << m ;
+      oreg|=m;
+    } else {
+      cout <<  " not " << ~m ;
+      oreg&=~m;
+    }
+    cout <<  " after " << oreg << endl;
+
+    myDet->setPatternIOControl(static_cast<uint64_t>(oreg));
+    oreg = static_cast<Long64_t>(myDet->getPatternIOControl().tsquash("Different values"));
+    cout << dec << sizeof(Long64_t) << " " << mask << " " << hex << m << " ioreg " << oreg << endl;
+
+    eIOCntrlRegister->SetText(to_string(oreg).c_str());
+
+  } CATCH_DISPLAY ("Could not get/set patternIOcontrol.", "ctbSignals::ToggledOutReg")
+
+}
+
+
+
+void ctbSignals::ToggledDbitList(Int_t mask){
+  try {
+
+    auto dbitlist = myDet->getRxDbitList().tsquash("Different values");
+
+    // anyway all enabled
+    if ((dbitlist.empty()) && (signals[mask]->isDbitList())) {
+      ;
+    } 
+    // set the dbitlist
+    else  {
+      std::vector <int> new_dbitlist;
+      for (int is=0; is<64; is++) {
+        if (signals[is]->isDbitList()){ 
+          new_dbitlist.push_back(is);
+          cout << is << " " << new_dbitlist.size() - 1 << endl;
+        }
+      }
+      if (new_dbitlist.size() > 64) 
+        new_dbitlist.clear();
+      myDet->setRxDbitList(new_dbitlist);
+      // get list again
+      dbitlist = myDet->getRxDbitList().tsquash("Different values");
+    }
+    
+    // enable all
+    if (dbitlist.empty()) {
+      for (int is=0; is<64; is++) {
+        signals[is]->setDbitList(1);
+      } 
+    }
+    else {
+      // disable all
+      for (int is=0; is<64; is++) {
+        signals[is]->setDbitList(0);
+      }
+      // enable selected
+      for (const auto &value : dbitlist)  {
+        signals[value]->setDbitList(1);
+      }
+    }
+
+  } CATCH_DISPLAY ("Could not get/set receiver dbit list.", "ctbSignals::ToggledDbitList")
+}
+
+
+
+
+void ctbSignals::ToggledPlot(Int_t b) {
+  
+  Emit("ToggledSignalPlot(Int_t)", b);
+
+}
+
+
+void ctbSignals::ToggledSignalPlot(Int_t b) {
+  
+  Emit("ToggledSignalPlot(Int_t)", b);
+
+}
+
+
+Pixel_t ctbSignals::getColor(int i){
+  if (i>=0 && i<NSIGNALS) 
+    return signals[i]->getColor();
+  return static_cast<Pixel_t>(-1);
+}
+
+int ctbSignals::getPlot(int i){
+  if (i>=0 && i<NSIGNALS) 
+    return signals[i]->isPlot();
+  return -1;
+};
+
+void ctbSignals::setDbitOffset(Long_t) {
+  setDbitOffset();
+}
+
+void ctbSignals::setDbitOffset(){
+  try {
+    myDet->setRxDbitOffset(eDbitOffset->GetNumber());
+  } CATCH_DISPLAY ("Could not set receiver dbit offset.", "ctbSignals::setDbitOffset")
+}

ctbGui/ctbSignals.h

@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+#ifndef CTBSIGNALS_H
+#define CTBSIGNALS_H
+#include  <TGFrame.h>
+
+
+#define NSIGNALS 64
+
+#define NIOSIGNALS 64 //for moench board was 52
+
+
+#define ADCLATCH 63
+#define DIGSIGLATCH 62
+
+
+
+
+class TGTextEntry;
+class TGLabel;
+class TGNumberEntry;
+class TGCheckButton;
+class TH1I;
+class  TGTextButton;
+class TGColorSelect;
+
+
+
+class TGNumberEntry;
+namespace sls
+{
+   class Detector;
+};
+class ctbSignal;
+
+#include <string>
+using namespace std;
+
+class ctbSignal : public TGHorizontalFrame {
+
+  // RQ_OBJECT("ctbSignal")
+
+private:
+
+   TGLabel *sLabel;
+   TGCheckButton *sOutput;
+   TGCheckButton *sDbitList;
+   TGCheckButton *sPlot;
+   TGLabel *sValue;
+   TGNumberEntry *sEntry;
+   TGColorSelect *fColorSel;
+
+   sls::Detector *myDet;
+   Int_t id;
+
+   TH1I *hsig;
+
+public:
+
+   ctbSignal(TGFrame *page, int i, sls::Detector *det);
+   int setSignalAlias(char *tit, int plot, int col);
+   string getSignalAlias();
+
+   TH1I *getPlot() {return hsig;};
+   int setOutput(Long64_t);
+   int fixOutput(int);
+   int setDbitList(Long64_t);
+
+   void ToggledOutput(Bool_t); 
+   void ToggledDbitList(Bool_t); 
+   void ToggledPlot(Bool_t); 
+   void ColorChanged(Pixel_t); 
+
+   int isDbitList();
+   int isOutput();
+   int isPlot();
+   Pixel_t getColor();
+
+
+   void ToggledSignalOutput(Int_t); //*SIGNAL*
+   void ToggledSignalDbitList(Int_t); //*SIGNAL*
+   void ToggledSignalPlot(Int_t); //*SIGNAL*
+
+
+
+   ClassDef(ctbSignal,0)
+};
+
+class ctbSignals : public TGGroupFrame {
+private:
+ 
+  ctbSignal *signals[NSIGNALS];
+
+  TGNumberEntry *eIOCntrlRegister;
+  TGNumberEntry *eDbitOffset;
+
+  sls::Detector *myDet;
+
+public:
+  ctbSignals(TGVerticalFrame *page, sls::Detector *det);
+   int setSignalAlias(string line);
+   string getSignalAlias();
+
+   int getPlot(int);
+   Pixel_t getColor(int);
+   
+   void update();
+   // void saveParameters();
+   string getSignalParameters();
+
+   //void setDbitList(Int_t);
+   void setDbitOffset(Long_t);
+   void setDbitOffset();
+
+   void ToggledOutReg(Int_t);
+   void ToggledDbitList(Int_t);
+   void ToggledPlot(Int_t);
+   void ToggledSignalPlot(Int_t); //*SIGNAL*
+
+   ClassDef(ctbSignals,0)
+};
+
+#endif

ctbGui/ctbSlowAdcs.cpp

@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+
+#include <stdio.h>
+#include <iostream>
+#include <fstream>
+
+#include <TGTextEntry.h>
+#include <TGLabel.h>
+#include <TGNumberEntry.h>
+#include <TGButton.h>
+
+#include "ctbSlowAdcs.h"
+#include "ctbDefs.h"
+#include "sls/Detector.h"
+#include "sls/sls_detector_defs.h"
+
+using namespace std;
+
+
+
+
+ctbSlowAdc::ctbSlowAdc(TGGroupFrame *page, int idac, sls::Detector *det) : TGHorizontalFrame(page, 800,50) , id(idac), myDet(det) {
+
+
+    TGHorizontalFrame *hframe=this;
+
+    page->AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 1,1,1,1));
+    MapWindow();
+
+    char tit[100];
+    
+
+   sprintf(tit, "SENSE %d:",idac-1000);
+
+   dacsLabel= new TGLabel(hframe, tit);// new TGLabel(hframe, tit);
+   
+ 
+
+   hframe->AddFrame(dacsLabel,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 5, 5, 5, 5));
+   dacsLabel->MapWindow();
+   dacsLabel->SetTextJustify(kTextLeft);
+
+  
+
+
+   sprintf(tit, "xxx");
+   dacsValue= new TGLabel(hframe, tit);
+   hframe->AddFrame( dacsValue,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 5, 5, 5, 5));
+   dacsValue->MapWindow();
+   dacsValue->SetTextJustify(kTextLeft);
+
+   
+
+   TGTextButton *b= new TGTextButton(hframe, "Update");
+   hframe->AddFrame( b,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 5, 5, 5, 5));
+   b->MapWindow();
+   b->SetTextJustify(kTextLeft);
+
+   b->Connect("Clicked()","ctbSlowAdc",this,"getValue()");
+}
+
+
+
+int ctbSlowAdc::setLabel(char *tit) {
+  if(tit)
+    dacsLabel->SetText(tit);
+
+  return id;
+
+}
+
+string ctbSlowAdc::getLabel() {
+  ostringstream line;
+  line << dacsLabel->GetText() <<  endl;
+
+   //  line << "DAC" << dec << id << " " <<  dacsUnit->IsOn() << endl;
+
+  return line.str();
+}
+
+
+
+int ctbSlowAdc::getValue() {
+  try {
+    std::string s;
+
+    // temp
+    if (id == static_cast<int>(slsDetectorDefs::SLOW_ADC_TEMP)) {
+
+      int val = myDet->getTemperature(static_cast<slsDetectorDefs::dacIndex>(id)).tsquash("Different values");
+      cout << "slow adc temp" << " " << val << endl;
+
+      s = to_string(val) + " " + to_string(0x00b0) + "C";//<2F>C
+      dacsValue->SetText(s.c_str());
+      return val;
+    } 
+    
+    // mv
+    else {
+
+      int val = myDet->getSlowADC(static_cast<slsDetectorDefs::dacIndex>(id)).tsquash("Different values");
+      cout << "slow adc " << id << " " << val << endl;
+      
+      s = to_string(val) + " mV"; 
+      dacsValue->SetText(s.c_str());
+      return val;
+    }
+
+  } CATCH_DISPLAY ("Could not get slow dac " + to_string(id) + ".", "ctbSlowAdc::getValue")
+
+  return -1;
+}
+
+
+
+
+
+
+
+ctbSlowAdcs::ctbSlowAdcs(TGVerticalFrame *page, sls::Detector *det)   : TGGroupFrame(page,"Sense",kVerticalFrame) , myDet(det){
+
+  SetTitlePos(TGGroupFrame::kLeft);
+  page->AddFrame(this,new TGLayoutHints( kLHintsTop | kLHintsExpandX , 10,10,10,10));
+  MapWindow();
+  
+  // cout << "window mapped " << endl;
+
+ 
+  for (int idac=0; idac<NSLOWADCS + 1; idac++) {
+
+     adcs[idac]=new ctbSlowAdc(this, idac+1000, myDet);
+
+  }
+  adcs[NSLOWADCS]->setLabel((char*)"Temperature"); 
+}
+
+
+
+
+int ctbSlowAdcs::setSlowAdcAlias(string line) {
+
+  int is=-1, mv=0;
+  char tit[100];
+  int narg=sscanf(line.c_str(),"SENSE%d %s %d",&is,tit,&mv);
+  if (narg<2)
+    return -1;
+  if (is>=0 && is<NSLOWADCS) 
+    adcs[is]->setLabel(tit);
+  return is;
+
+}
+
+string ctbSlowAdcs::getSlowAdcAlias() {
+
+  ostringstream line;
+
+  for (int i=0; i<NSLOWADCS; i++)
+    line << adcs[i]->getLabel() << endl;
+  return line.str();
+}
+
+
+
+
+string ctbSlowAdcs::getAdcParameters() {
+
+  ostringstream line;
+
+  for (int i=0; i<NSLOWADCS; i++) {
+    //line << "dacs:" << i << " " << dacs[i]->getValue << endl;
+    line << "adc:" << i << " " << adcs[i]->getValue() << endl;
+  }    
+  line << "adc:-1" << adcs[NSLOWADCS]->getValue() << endl;
+  return line.str();
+}
+
+
+
+void  ctbSlowAdcs::update() {
+  for (int idac=0; idac<NSLOWADCS+1; idac++) {
+    adcs[idac]->getValue();
+  }
+}

ctbGui/ctbSlowAdcs.h

@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+
+
+#ifndef CTBSLOWADCS_H
+#define CTBSLOWADCS_H
+#include  <TGFrame.h>
+
+
+//#define NDACS 16
+#define NSLOWADCS 8
+
+
+
+
+class TGTextEntry;
+class TGLabel;
+class TGNumberEntry;
+class TGCheckButton;
+class TGTextButton;
+
+
+
+namespace sls
+{
+   class Detector;
+};
+
+#include <string>
+using namespace std;
+
+class ctbSlowAdc : public TGHorizontalFrame {
+
+
+ protected:
+  // TGLabel *dacsLabel;
+  // TGNumberEntry *dacsEntry;
+  // TGCheckButton *dacsUnit;
+   TGLabel *dacsLabel;
+   TGLabel *dacsValue;
+   int id;
+
+   sls::Detector* myDet;
+ public:
+   ctbSlowAdc(TGGroupFrame*, int , sls::Detector*);
+   int getValue();
+   
+   int setLabel(char *tit);
+   string getLabel();
+
+
+
+   ClassDef(ctbSlowAdc,0)
+};
+
+
+class ctbSlowAdcs : public TGGroupFrame {
+private:
+  
+
+
+   ctbSlowAdc *adcs[NSLOWADCS+1];
+
+   sls::Detector* myDet;
+
+public:
+   ctbSlowAdcs(TGVerticalFrame *page, sls::Detector*);
+
+   int setSlowAdcAlias(string line);
+   // int setDacAlias(string line);
+   string getSlowAdcAlias();
+   string getAdcParameters();
+
+   void update();
+
+   ClassDef(ctbSlowAdcs,0)
+};
+
+#endif
+

ctbGui/patternGenerator/deserializer.cpp

@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+
+#include <stdlib.h>  
+#include <stdint.h>  
+#include <string.h>  
+#include <sys/utsname.h>   
+#include <sys/types.h>
+#include <unistd.h>  
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <math.h>
+#include <fcntl.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+int main(int argc, char *argv[]) {
+
+  int iarg;
+  char fname[10000];
+  uint64_t word;
+  int val[64];
+  int bit[64];
+  FILE *fdin;
+  
+  int nb=2;
+  int off=0;
+  int ioff=0;
+  int dr=24;
+  int idr=0;
+  int ib=0;
+  int iw=0;
+  bit[0]=19;
+  bit[1]=8;
+  //  for (iarg=0; iarg<argc; iarg++) printf("%d %s\n",iarg, argv[iarg]);
+  
+  if (argc<2) printf("Error: usage is %s fname [dr off  b0 b1 bn]\n");
+  
+  if (argc>2) dr=atoi(argv[2]);
+  if (argc>3) off=atoi(argv[3]);
+  if (argc>4) {
+  for (ib=0; ib<64; ib++) {
+    if (argc>4+ib) {
+      bit[ib]=atoi(argv[4+ib]);
+      nb++;
+    }
+  }
+  
+  }
+  
+  idr=0;
+  for (ib=0; ib<nb; ib++) {
+    val[ib]=0;
+  }
+  
+  
+  fdin=fopen(argv[1],"rb");
+  if (fdin==NULL) {
+    printf("Cannot open input file %s for reading\n",argv[1]);
+    return 200;
+  } 
+  
+  while (fread((void*)&word, 8, 1, fdin)) {
+    //   printf("%llx\n",word);
+    if (ioff<off) ioff++;
+    else {
+      
+      for (ib=0; ib<nb; ib++) {
+	if (word&(1<<bit[ib])) 	  val[ib]|=(1<<idr);
+      }
+      idr++;
+      if (idr==dr) {
+	idr=0;
+	fprintf(stdout,"%d\t",iw++);
+	for (ib=0; ib<nb; ib++) {
+#ifdef HEX
+	  fprintf(stdout,"%08llx\t",val[ib]);
+#else
+	  fprintf(stdout,"%lld\t",val[ib]);
+	  
+#endif
+	  
+	  val[ib]=0;
+	}
+	fprintf(stdout,"\n");
+      }
+      
+    }
+
+  }
+  if (idr!=0) {
+    fprintf(stdout,"%d\t",iw++);
+    for (ib=0; ib<nb; ib++) {
+#ifdef HEX
+	  fprintf(stdout,"%08llx\t",val[ib]);
+#else
+	  fprintf(stdout,"%lld\t",val[ib]);
+	  
+#endif
+	  
+	  val[ib]=0;
+    }
+    fprintf(stdout,"\n");
+  }
+
+  fclose(fdin);
+
+  return 0;
+}

ctbGui/patternGenerator/generator.c

@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: LGPL-3.0-or-other
+// Copyright (C) 2021 Contributors to the SLS Detector Package
+/****************************************************************************
+usage to generate a patter test.pat from test.p
+
+gcc -DINFILE="\"test.p\"" -DOUTFILE="\"test.pat\"" -o test.exe generator.c ; ./test.exe ; rm test.exe
+
+
+*************************************************************************/
+
+#include <stdlib.h>  
+#include <stdint.h>  
+#include <string.h>  
+#include <sys/utsname.h>   
+#include <sys/types.h>
+#include <unistd.h>  
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <math.h>
+#include <fcntl.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#define MAXLOOPS 3
+#define MAXTIMERS 3
+#define MAXWORDS 1024
+
+
+
+uint64_t pat=0;
+uint64_t iopat=0;
+uint64_t clkpat=0;
+
+int iaddr=0;
+int waitaddr[3]={MAXWORDS,MAXWORDS,MAXWORDS};
+int startloopaddr[3]={MAXWORDS,MAXWORDS,MAXWORDS}; 
+int stoploopaddr[3]={MAXWORDS,MAXWORDS,MAXWORDS}; 
+int start=0, stop=0;
+uint64_t waittime[3]={0,0,0};
+int nloop[3]={0,0,0};
+
+char infile[10000], outfile[10000];
+
+FILE *fd, *fd1;
+uint64_t PAT[MAXWORDS];
+
+
+int i,ii,iii,j,jj,jjj,pixx,pixy,memx,memy,muxout,memclk,colclk,rowclk,muxclk,memcol,memrow,loopcounter;
+
+void setstart() {
+  start=iaddr;
+}
+
+void setstop() {
+  stop=iaddr;
+}
+
+void setinput(int bit) {
+  uint64_t mask=1;
+  mask=mask<<bit;
+  iopat &= ~mask;
+}
+
+void setoutput(int bit) {
+  uint64_t mask=1;
+  mask=mask<<bit;
+  iopat |= mask;
+}
+/*
+void setclk(int bit) {
+  uint64_t mask=1;
+  mask=mask<<bit;
+  iopat |= mask;
+  clkpat |= mask;
+}
+*/
+void clearbit(int bit){
+  uint64_t mask=1;
+  mask=mask<<bit;
+  pat &= ~mask;
+}
+void setbit(int bit){
+  uint64_t mask=1;
+  mask=mask<<bit;
+  pat |= mask;
+}
+
+int checkbit(int bit) {
+  uint64_t mask=1;
+  mask=mask<<bit;
+  return (pat & mask ) >>bit;
+}
+
+void setstartloop(int iloop) {
+  if (iloop>=0 && iloop<MAXLOOPS)
+    startloopaddr[iloop]=iaddr;
+}
+
+
+void setstoploop(int iloop) {
+  if (iloop>=0 && iloop<MAXLOOPS)
+    stoploopaddr[iloop]=iaddr;
+}
+
+
+void setnloop(int iloop, int n) {
+  if (iloop>=0 && iloop<MAXLOOPS)
+    nloop[iloop]=n;
+}
+
+void setwaitpoint(int iloop) {
+  if (iloop>=0 && iloop<MAXTIMERS)
+    waitaddr[iloop]=iaddr;
+}
+
+
+void setwaittime(int iloop, uint64_t t) {
+  if (iloop>=0 && iloop<MAXTIMERS)
+    waittime[iloop]=t;
+}
+
+
+
+
+void pw(){
+  if (iaddr<MAXWORDS)
+    PAT[iaddr]= pat;
+  fprintf(fd,"patword 0x%04x 0x%016llx\n",iaddr, pat);
+  iaddr++;
+  if (iaddr>=MAXWORDS) printf("ERROR: too many word in the pattern (%d instead of %d)!",iaddr, MAXWORDS);
+}
+
+int parseCommand(int clk, int cmdbit, int cmd, int length) {
+  int ibit;
+  clearbit(clk);
+  for (ibit=0; ibit<length; ibit++) {
+    if (cmd&(1>>ibit))
+      setbit(cmdbit);
+    else
+      clearbit(cmdbit);
+    pw();
+    /******/
+    setbit(clk);
+    pw();
+    /******/
+  }
+};
+
+
+
+main(void) {
+  int iloop=0;
+  fd=fopen(OUTFILE,"w");
+#include INFILE
+
+  fprintf(fd,"patioctrl 0x%016llx\n",iopat);
+  //fprintf(fd,"patclkctrl 0x%016llx\n",clkpat);
+  fprintf(fd,"patlimits 0x%04x 0x%04x\n",start, stop);
+
+  for (iloop=0; iloop<MAXLOOPS; iloop++) {
+    fprintf(fd,"patloop%d 0x%04x 0x%04x\n",iloop, startloopaddr[iloop], stoploopaddr[iloop]);
+    if ( startloopaddr[iloop]<0 || stoploopaddr[iloop]<= startloopaddr[iloop]) nloop[iloop]=0;
+    fprintf(fd,"patnloop%d %d\n",iloop, nloop[iloop]);
+  }
+
+  for (iloop=0; iloop<MAXTIMERS; iloop++) {
+    fprintf(fd,"patwait%d 0x%04x\n",iloop, waitaddr[iloop]);
+    if (waitaddr[iloop]<0) waittime[iloop]=0;
+    fprintf(fd,"patwaittime%d %lld\n",iloop, waittime[iloop]);
+  }
+  
+  close((int)fd);
+  fd1=fopen(OUTFILEBIN,"w");
+  fwrite(PAT,sizeof(uint64_t),iaddr, fd1);
+  close((int)fd1);
+}

ctbGui/patternGenerator/test.p

@@ -0,0 +1,201 @@
+//define signals and directions (Input, outputs, clocks)
+
+
+#define compTestIN 1
+setoutput(compTestIN);
+
+#define curON 32
+setoutput(curON);
+
+#define side_clk 2
+setclk(side_clk);
+
+#define side_din 3
+setoutput(side_din);
+
+#define clear_shr 4
+setoutput(clear_shr);
+
+#define bottom_din 5
+setoutput(bottom_din);
+
+#define bottom_clk 6
+setclk(bottom_clk);
+
+#define gHG 7
+setoutput(gHG);
+
+#define bypassCDS 31
+setoutput(bypassCDS);
+
+
+#define ENprechPRE 8
+setoutput(ENprechPRE);
+
+
+#define res 9
+setoutput(res);
+
+#define pulseOFF 30
+setoutput(pulseOFF);
+
+#define connCDS 27
+setoutput(connCDS);
+
+#define Dsg_1 24
+setoutput(Dsg_1);
+
+
+#define Dsg_2 25
+setoutput(Dsg_2);
+
+
+#define Dsg_3 23
+setoutput(Dsg_3);
+
+#define sto0 10
+setoutput(sto0);
+
+#define sto1 11
+setoutput(sto1);
+
+#define sto2 12
+setoutput(sto2);
+
+#define resCDS 13
+setoutput(resCDS);
+
+#define prechargeConnect 14
+setoutput(prechargeConnect);
+
+#define pulse 15
+setoutput(pulse);
+
+#define PCT_mode 21
+setoutput(PCT_mode);
+
+#define res_DGS 16
+setoutput(res_DGS);
+
+#define adc_ena 17
+setoutput(adc_ena);
+
+
+#define CLKBIT 18
+setclk(CLKBIT);
+
+
+#define adc_sync 63
+setoutput(adc_sync);
+
+
+
+
+
+	  
+#define PW pw()
+#define SB(x) setbit(x) 
+#define CB(x) clearbit(x)
+#define CLOCK  clearbit(CLKBIT); pw();setbit(CLKBIT);pw()
+#define LCLOCK  clearbit(CLKBIT); pw();setbit(CLKBIT);pw();clearbit(CLKBIT); pw()
+#define CLOCKS(x) for (i=0;i<x;i++) {clearbit(CLKBIT);pw(); setbit(CLKBIT); pw();}
+#define STOP setstop();
+#define START setstart();
+#define REPEAT(x) for (i=0;i<(x);i++) {pw();}
+#define DOFOR(x) for (j=0;j<(x);j++) {
+// }				     
+#define STARTUP1 CB(compTestIN);SB(clear_shr);CB(side_clk);CB(side_din);CB(bottom_din);CB(bottom_clk);
+#define STARTUP2 CB(pulse);SB(PCT_mode);SB(pulseOFF);CB(curON);
+#define STARTUP3 SB(res);SB(gHG);SB(ENprechPRE);
+#define STARTUP4 SB(bypassCDS); CB(connCDS);CB(sto0);SB(sto1);SB(sto2);
+#define STARTUP5 SB(resCDS);CB(Dsg_1);CB(Dsg_2);SB(Dsg_3);CB(prechargeConnect);SB(res_DGS);
+#define STARTUP STARTUP1 STARTUP2 STARTUP3 STARTUP4 STARTUP5 PW;
+
+
+
+
+
+//****NOTES****//
+//FUNCTIONS
+//Declare functions at the beginning 
+void load_pix(int nx, int ny)
+{//SELECT PIXEL 1,1 for readout
+SB(clear_shr);PW;PW;
+CB(clear_shr);PW;PW;PW;PW;
+
+SB(side_din);PW;
+SB(side_clk);PW;
+CB(side_din);
+setstartloop(0); //loop on the rows
+SB(side_clk);PW;
+setstoploop(0);  //finish loop on the rows
+setnloop(0,ny); //set number row selected -can be changed dynamically
+CB(side_clk);PW;
+SB(bottom_din);PW;
+SB(bottom_clk);PW;
+CB(bottom_din);
+setstartloop(1); //loop on the columns
+SB(bottom_clk);PW;
+setstoploop(1); //loop on the columns
+setnloop(1,ny); //set number columns selected -can be changed dynamically
+}
+   
+void load_col(void)
+{//SELECT COLUMN 1 for readout
+SB(clear_shr);PW;PW;
+CB(clear_shr);PW;PW;PW;PW;
+SB(bottom_din);PW;
+SB(bottom_clk);PW;
+CB(bottom_clk);PW;
+CB(bottom_din);PW;
+}
+//END of FUNCTIONS
+////////////////////////////////////////////////////////
+//LET BYPASS PREAMP AND CDS and write on preamp out.//
+//THIS ALLOWS CHECKING SOURCE FOLLOWERS               //
+////////////////////////////////////////////////////////
+
+   
+PW;
+   
+SB(5); PW;
+
+CB(5); PW;
+
+START; //pattern starts from here
+STARTUP;
+setwaitpoint(0); //set wait points
+PW;
+setwaittime(0,20); //wait time - can be changed dynamically
+SB(adc_ena);PW;
+   printf("ADC sync %x %d %llx\n",iaddr,adc_sync, pat);
+SB(adc_sync);PW;
+   printf("ADC sync %x %d  %llx\n",iaddr, adc_sync, pat);
+CB(gHG);
+setwaitpoint(1); //set wait points
+setwaittime(1,16); //wait time - can be changed dynamically
+CB(adc_sync);PW;
+load_pix(10, 20);
+
+CB(res);
+//CB(Dsg_3);PW;
+CB(res_DGS);
+setwaitpoint(2); //set wait points
+setwaittime(2,1000); //wait time - can be changed dynamically
+
+//SB(res_DGS);
+//PW;
+//SB(Dsg_3);
+//
+//CB(connCDS);
+//TEST SIGNALS END
+//
+REPEAT(20)
+
+//****************//
+//*FINAL COMMANDS*//
+//****************//
+CB(adc_ena);PW;
+//STARTUP;
+STOP; PW; //stops here
+//REPEAT(4);

docs/CMakeLists.txt

@@ -55,15 +55,6 @@ set(SPHINX_SOURCE_FILES
   src/troubleshooting.rst
   src/receivers.rst
   src/slsreceiver.rst
-  src/udpheader.rst
-  src/udpconfig.rst
-  src/udpdetspec.rst
-  src/fileformat.rst
-  src/slsreceiverheaderformat.rst
-  src/masterfileattributes.rst
-  src/binaryfileformat.rst
-  src/hdf5fileformat.rst
-  src/zmqjsonheaderformat.rst
 )
 
 foreach(filename ${SPHINX_SOURCE_FILES})

docs/Doxyfile.in

@@ -890,7 +890,7 @@ EXCLUDE_SYMLINKS       = NO
 # Note that the wildcards are matched against the file with absolute path, so to
 # exclude all test directories for example use the pattern */test/*
 
-EXCLUDE_PATTERNS       = */docs/* */tests/* */python/* */manual */slsDetectorServers/* */libs/* */integrationTests *README* */slsDetectorGui/* */ctbGui/* */slsDetectorCalibration/* *TobiSchluter*
+EXCLUDE_PATTERNS       = */docs/* */tests/* */python/* */manual */slsDetectorServers/* */libs/* */integrationTests *README* */slsDetectorGui/* */ctbGui/* */slsDetectorCalibration/*
 
 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
 # (namespaces, classes, functions, etc.) that should be excluded from the

docs/conf.py.in

@@ -63,4 +63,4 @@ html_static_path = ['static']
 
 
 def setup(app):
-    app.add_css_file('css/extra.css')  # may also be an URL
+    app.add_stylesheet('css/extra.css')  # may also be an URL

docs/src/binaryfileformat.rst

@@ -1,438 +0,0 @@
-Binary File Format
-====================
-
-This is the default file format that can be configured using command `fformat <commandline.html#term-fformat-binary-hdf5>`_.
-
-    .. code-block:: bash
-
-        sls_detector_put fformat binary
-
-
-Master File
---------------
-
-* File Name: [fpath]/[fname]_master_[findex].json :ref:`Details here<file name format>`
-
-* It is in json format and created for every acquisition.
-
-* It contains :ref:`attributes<master file attributes>` relevant to the acquisition. This can vary with detector type shown in :ref:`master json file examples <json master file examples>` here.
-
-* It shows the :ref:`**SLS Receiver Header** <sls receiver header format>` format used in data files.
-
-* Enabled/disabled using command `fmaster <commandline.html#term-fmaster-0-1>`_. 
-
-
-Data File
-----------
-
-* File Name: [fpath]/[fname]_dx_fy_[findex].raw :ref:`Details here<file name format>`
-
-* It store multiple frames sequentially, with total number of frames determined by `rx_framesperfile <commandline.html#term-rx_framesperfile-n_frames>`_ parameter.
-
-* Each frame includes a :ref:`**sls_receiver_header** <sls receiver header format>` structure, followed by the actual frame data.
-
-
-
-.. _json master file examples:
-
-JSON Master File Examples
----------------------------------------------------
-
-Eiger
-^^^^^
-
-.. code-block:: text
-
-    {
-        "Version": 7.2,
-        "Timestamp": "Wed Nov 13 15:46:30 2024",
-        "Detector Type": "Eiger",
-        "Timing Mode": "auto",
-        "Geometry": {
-            "x": 2,
-            "y": 1
-        },
-        "Image Size in bytes": 262144,
-        "Pixels": {
-            "x": 512,
-            "y": 256
-        },
-        "Max Frames Per File": 10000,
-        "Frame Discard Policy": "nodiscard",
-        "Frame Padding": 1,
-        "Scan Parameters": "[disabled]",
-        "Total Frames": 1,
-        "Receiver Roi": {
-            "xmin": 4294967295,
-            "xmax": 4294967295,
-            "ymin": 4294967295,
-            "ymax": 4294967295
-        },
-        "Dynamic Range": 16,
-        "Ten Giga": 0,
-        "Exptime": "1s",
-        "Period": "1s",
-        "Threshold Energy": -1,
-        "Sub Exptime": "2.62144ms",
-        "Sub Period": "2.62144ms",
-        "Quad": 0,
-        "Number of rows": 256,
-        "Rate Corrections": "[0]",
-        "Frames in File": 1,
-        "Frame Header Format": {
-            "Frame Number": "8 bytes",
-            "SubFrame Number/ExpLength": "4 bytes",
-            "Packet Number": "4 bytes",
-            "Bunch ID": "8 bytes",
-            "Timestamp": "8 bytes",
-            "Module Id": "2 bytes",
-            "Row": "2 bytes",
-            "Column": "2 bytes",
-            "Reserved": "2 bytes",
-            "Debug": "4 bytes",
-            "Round Robin Number": "2 bytes",
-            "Detector Type": "1 byte",
-            "Header Version": "1 byte",
-            "Packets Caught Mask": "64 bytes"
-        }
-    }
-
-
-
-Jungfrau
-^^^^^^^^
-
-.. code-block:: text
-
-    {
-        "Version": 7.2,
-        "Timestamp": "Wed Nov 13 13:03:53 2024",
-        "Detector Type": "Jungfrau",
-        "Timing Mode": "auto",
-        "Geometry": {
-            "x": 1,
-            "y": 1
-        },
-        "Image Size in bytes": 1048576,
-        "Pixels": {
-            "x": 1024,
-            "y": 512
-        },
-        "Max Frames Per File": 10000,
-        "Frame Discard Policy": "nodiscard",
-        "Frame Padding": 1,
-        "Scan Parameters": "[disabled]",
-        "Total Frames": 1000,
-        "Receiver Roi": {
-            "xmin": 4294967295,
-            "xmax": 4294967295,
-            "ymin": 4294967295,
-            "ymax": 4294967295
-        },
-        "Exptime": "10us",
-        "Period": "2ms",
-        "Number of UDP Interfaces": 1,
-        "Number of rows": 512,
-        "Frames in File": 10,
-        "Frame Header Format": {
-            "Frame Number": "8 bytes",
-            "SubFrame Number/ExpLength": "4 bytes",
-            "Packet Number": "4 bytes",
-            "Bunch ID": "8 bytes",
-            "Timestamp": "8 bytes",
-            "Module Id": "2 bytes",
-            "Row": "2 bytes",
-            "Column": "2 bytes",
-            "Reserved": "2 bytes",
-            "Debug": "4 bytes",
-            "Round Robin Number": "2 bytes",
-            "Detector Type": "1 byte",
-            "Header Version": "1 byte",
-            "Packets Caught Mask": "64 bytes"
-        }
-    }
-
-
-Gotthard2
-^^^^^^^^^^^^
-
-.. code-block:: text
-
-    {
-        "Version": 7.2,
-        "Timestamp": "Wed Nov 13 14:18:17 2024",
-        "Detector Type": "Gotthard2",
-        "Timing Mode": "auto",
-        "Geometry": {
-            "x": 1,
-            "y": 1
-        },
-        "Image Size in bytes": 2560,
-        "Pixels": {
-            "x": 1280,
-            "y": 1
-        },
-        "Max Frames Per File": 20000,
-        "Frame Discard Policy": "nodiscard",
-        "Frame Padding": 1,
-        "Scan Parameters": "[disabled]",
-        "Total Frames": 10,
-        "Receiver Roi": {
-            "xmin": 4294967295,
-            "xmax": 4294967295,
-            "ymin": 4294967295,
-            "ymax": 4294967295
-        },
-        "Exptime": "0ns",
-        "Period": "0ns",
-        "Burst Mode": "burst_internal",
-        "Frames in File": 10,
-        "Frame Header Format": {
-            "Frame Number": "8 bytes",
-            "SubFrame Number/ExpLength": "4 bytes",
-            "Packet Number": "4 bytes",
-            "Bunch ID": "8 bytes",
-            "Timestamp": "8 bytes",
-            "Module Id": "2 bytes",
-            "Row": "2 bytes",
-            "Column": "2 bytes",
-            "Reserved": "2 bytes",
-            "Debug": "4 bytes",
-            "Round Robin Number": "2 bytes",
-            "Detector Type": "1 byte",
-            "Header Version": "1 byte",
-            "Packets Caught Mask": "64 bytes"
-        }
-    }
-
-Mythen3
-^^^^^^^
-
-.. code-block:: text
-
-    {
-        "Version": 7.2,
-        "Timestamp": "Wed Nov 13 14:39:14 2024",
-        "Detector Type": "Mythen3",
-        "Timing Mode": "auto",
-        "Geometry": {
-            "x": 1,
-            "y": 1
-        },
-        "Image Size in bytes": 15360,
-        "Pixels": {
-            "x": 3840,
-            "y": 1
-        },
-        "Max Frames Per File": 10000,
-        "Frame Discard Policy": "nodiscard",
-        "Frame Padding": 1,
-        "Scan Parameters": "[disabled]",
-        "Total Frames": 1,
-        "Receiver Roi": {
-            "xmin": 4294967295,
-            "xmax": 4294967295,
-            "ymin": 4294967295,
-            "ymax": 4294967295
-        },
-        "Dynamic Range": 32,
-        "Ten Giga": 1,
-        "Period": "2ms",
-        "Counter Mask": "0x7",
-        "Exptime1": "0.1s",
-        "Exptime2": "0.1s",
-        "Exptime3": "0.1s",
-        "GateDelay1": "0ns",
-        "GateDelay2": "0ns",
-        "GateDelay3": "0ns",
-        "Gates": 1,
-        "Threshold Energies": "[-1, -1, -1]",
-        "Frames in File": 1,
-        "Frame Header Format": {
-            "Frame Number": "8 bytes",
-            "SubFrame Number/ExpLength": "4 bytes",
-            "Packet Number": "4 bytes",
-            "Bunch ID": "8 bytes",
-            "Timestamp": "8 bytes",
-            "Module Id": "2 bytes",
-            "Row": "2 bytes",
-            "Column": "2 bytes",
-            "Reserved": "2 bytes",
-            "Debug": "4 bytes",
-            "Round Robin Number": "2 bytes",
-            "Detector Type": "1 byte",
-            "Header Version": "1 byte",
-            "Packets Caught Mask": "64 bytes"
-        }
-    }
-
-
-Moench
-^^^^^^
-
-.. code-block:: text
-
-    {
-        "Version": 7.2,
-        "Timestamp": "Wed Nov 13 14:41:32 2024",
-        "Detector Type": "Moench",
-        "Timing Mode": "auto",
-        "Geometry": {
-            "x": 1,
-            "y": 1
-        },
-        "Image Size in bytes": 320000,
-        "Pixels": {
-            "x": 400,
-            "y": 400
-        },
-        "Max Frames Per File": 100000,
-        "Frame Discard Policy": "discardpartial",
-        "Frame Padding": 1,
-        "Scan Parameters": "[disabled]",
-        "Total Frames": 1,
-        "Receiver Roi": {
-            "xmin": 4294967295,
-            "xmax": 4294967295,
-            "ymin": 4294967295,
-            "ymax": 4294967295
-        },
-        "Exptime": "10us",
-        "Period": "2ms",
-        "Number of UDP Interfaces": 1,
-        "Number of rows": 400,
-        "Frames in File": 1,
-        "Frame Header Format": {
-            "Frame Number": "8 bytes",
-            "SubFrame Number/ExpLength": "4 bytes",
-            "Packet Number": "4 bytes",
-            "Bunch ID": "8 bytes",
-            "Timestamp": "8 bytes",
-            "Module Id": "2 bytes",
-            "Row": "2 bytes",
-            "Column": "2 bytes",
-            "Reserved": "2 bytes",
-            "Debug": "4 bytes",
-            "Round Robin Number": "2 bytes",
-            "Detector Type": "1 byte",
-            "Header Version": "1 byte",
-            "Packets Caught Mask": "64 bytes"
-        }
-    }
-
-Gotthard I
-^^^^^^^^^^^
-
-.. code-block:: text
-
-    {
-        "Version": 7.2,
-        "Timestamp": "Wed Nov 13 15:16:19 2024",
-        "Detector Type": "Gotthard",
-        "Timing Mode": "auto",
-        "Geometry": {
-            "x": 1,
-            "y": 1
-        },
-        "Image Size in bytes": 2560,
-        "Pixels": {
-            "x": 1280,
-            "y": 1
-        },
-        "Max Frames Per File": 20000,
-        "Frame Discard Policy": "nodiscard",
-        "Frame Padding": 1,
-        "Scan Parameters": "[disabled]",
-        "Total Frames": 1,
-        "Receiver Roi": {
-            "xmin": 4294967295,
-            "xmax": 4294967295,
-            "ymin": 4294967295,
-            "ymax": 4294967295
-        },
-        "Exptime": "1.00001ms",
-        "Period": "1s",
-        "Detector Roi": {
-            "xmin": 4294967295,
-            "xmax": 4294967295
-        },
-        "Frames in File": 1,
-        "Frame Header Format": {
-            "Frame Number": "8 bytes",
-            "SubFrame Number/ExpLength": "4 bytes",
-            "Packet Number": "4 bytes",
-            "Bunch ID": "8 bytes",
-            "Timestamp": "8 bytes",
-            "Module Id": "2 bytes",
-            "Row": "2 bytes",
-            "Column": "2 bytes",
-            "Reserved": "2 bytes",
-            "Debug": "4 bytes",
-            "Round Robin Number": "2 bytes",
-            "Detector Type": "1 byte",
-            "Header Version": "1 byte",
-            "Packets Caught Mask": "64 bytes"
-        }
-    }
-
-Chip Test Board
-^^^^^^^^^^^^^^^
-
-.. code-block:: text
-
-    {
-        "Version": 7.2,
-        "Timestamp": "Wed Nov 13 15:32:59 2024",
-        "Detector Type": "ChipTestBoard",
-        "Timing Mode": "auto",
-        "Geometry": {
-            "x": 1,
-            "y": 1
-        },
-        "Image Size in bytes": 48018,
-        "Pixels": {
-            "x": 3,
-            "y": 1
-        },
-        "Max Frames Per File": 20000,
-        "Frame Discard Policy": "nodiscard",
-        "Frame Padding": 1,
-        "Scan Parameters": "[disabled]",
-        "Total Frames": 1,
-        "Receiver Roi": {
-            "xmin": 4294967295,
-            "xmax": 4294967295,
-            "ymin": 4294967295,
-            "ymax": 4294967295
-        },
-        "Exptime": "0ns",
-        "Period": "0.18s",
-        "Ten Giga": 0,
-        "ADC Mask": "0x2202",
-        "Analog Flag": 1,
-        "Analog Samples": 8003,
-        "Digital Flag": 0,
-        "Digital Samples": 1000,
-        "Dbit Offset": 0,
-        "Dbit Bitset": 0,
-        "Transceiver Mask": "0x3",
-        "Transceiver Flag": 0,
-        "Transceiver Samples": 1,
-        "Frames in File": 1,
-        "Frame Header Format": {
-            "Frame Number": "8 bytes",
-            "SubFrame Number/ExpLength": "4 bytes",
-            "Packet Number": "4 bytes",
-            "Bunch ID": "8 bytes",
-            "Timestamp": "8 bytes",
-            "Module Id": "2 bytes",
-            "Row": "2 bytes",
-            "Column": "2 bytes",
-            "Reserved": "2 bytes",
-            "Debug": "4 bytes",
-            "Round Robin Number": "2 bytes",
-            "Detector Type": "1 byte",
-            "Header Version": "1 byte",
-            "Packets Caught Mask": "64 bytes"
-        }
-    }

docs/src/commandline.rst

@@ -4,54 +4,11 @@ Command line interface
 Usage
 -------------
 
-The syntax is *'[detector index]-[module index]:[command]'*, where the indices are by default '0', when not specified.
-
-Module index
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Modules are indexed based on their order in the hostname command. They are used to configure a specific module within a detector and are followed by a ':' in syntax.
-
-    .. code-block::
-
-        # Applies to all modules of detector 0
-        sls_detector_put exptime 5s
-
-        # Applies to only the 4th module
-        sls_detector_put 3:exptime 5s
-
-
-Detector index
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-This index is useful when configuring multiple detectors from a single host. Each detector uses a unique shared memory identified by a detector index, derived again from the hostname command. It is followed by a '-'. 
-
-    .. code-block::
-
-        # For detector with index 2 in shared memory
-        sls_detector_put 2-hostname bchip133+bchip123+bchip456
-        
-        # Without '-', the detector index defaults to 0
-        sls_detector_put hostname bchip133+bchip123+bchip456
-
-        # Accessing all modules with detector index 2
-        sls_detector_put 2-exptime
-
-        # Starting acquisition only for detector with index 2
-        sls_detector_put 2-start
-
-        # Applies only to the 2nd detector, 4th module
-        sls_detector_put 1-3:exptime 5s
-
-
-Command Execution
-^^^^^^^^^^^^^^^^^^^^^^^
-Commands can be executed using:
-
-*   **sls_detector_put**: setting values
-*   **sls_detector_get**: getting values
-*   **sls_detector**: automatically infers based on the number of arguments.
-*   **sls_detector_help**: gets help on the specific command
-*   **sls_detector_acquire**: initiates acquisition with the detector. This command blocks until the entire acquisition process is completed.
+Commands can be used either with sls_detector_get or sls_detector_put
 
+.. code-block::
 
+    sls_detector_get vrf
 
 Help
 --------
@@ -67,19 +24,6 @@ Help
     # get help for a particular command
     sls_detector_get -h fpath
     sls_detector_help fpath
-
-    # list of deprecated commands
-    list deprecated
-
-
-Autocompletion
----------------
-
-bash_autocomplete.sh or zsh_autocomplete.sh must be sourced from the main package folder to enable auto completion of commands and arguments for the command line on that shell.
-
-.. code-block::
-
-    source bash_autocomplete.sh
   
 
 Commands
@@ -88,14 +32,14 @@ Commands
 .. include:: ../commands.rst
 
 
-Deprecated commands
+Depreciated commands
 ------------------------
 
 .. note ::
 	All the dac commands are preceded with the **dac** command. Use command **daclist** to get correct list of dac command arguments for current detector.
 
-.. csv-table:: Deprecated commands
-   :file: ../deprecated.csv
+.. csv-table:: Depreciated commands
+   :file: ../depreciated.csv
    :widths: 35, 35
    :header-rows: 1
 

docs/src/consuming.rst

@@ -19,7 +19,7 @@ A minimal CMakeLists.txt could look like this:
 .. code-block:: cmake
 
     project(myDetectorIntegration)
-    cmake_minimum_required(VERSION 3.14)
+    cmake_minimum_required(VERSION 3.12)
     add_subdirectory(slsDetectorPackage)
 
     #Add your executable
@@ -43,7 +43,7 @@ should be needed, otherwise specify cmake prefix path.
 
 .. code-block:: cmake 
 
-    cmake_minimum_required(VERSION 3.14)
+    cmake_minimum_required(VERSION 3.12)
     project(myintegration)
 
     find_package(slsDetectorPackage 5.0 REQUIRED)

docs/src/dependencies.rst

@@ -13,36 +13,26 @@ To use the basic building blocks, meaning sls_detector_get/put and
 the shared libraries these are needed: 
 
  * Linux, preferably recent kernel (currently no cross platform support)
- * CMake >= 3.14 
+ * CMake > 3.12 
  * C++11 compatible compiler. (We test with gcc and clang)
-
------------------------
-Python bindings
------------------------
-
- * Python >= 3.8
- * pybind11 2.13.6 (packaged in libs)
-
-.. note ::  
-
-    Refer :ref:`pybind11 notes. <pybind for different slsDetectorPackage versions>`  
-
------------------------
-ZeroMQ
------------------------
-
- * Zeromq 4.3.4 (packaged in libs)
-
-.. note ::   
-
-    Refer :ref:`zeromq notes. <zeromq for different slsDetectorPackage versions>` 
+ * ZeroMQ version 4
 
 -----------------------
 GUI
 -----------------------
 
- * Qt 5.9
- * Qwt 6.1.5 (packaged in libs)
+The GUI is currently using Qt4 but watch out for an upgrade to 5. 
+
+ * Qt 4.8
+ * Qwt 6.1
+
+-----------------------
+Python bindings
+-----------------------
+
+ * Python > 3.6
+ * pybind11 (packaged in libs/)
+
 
 -----------------------
 Moench executables
@@ -66,6 +56,4 @@ Packaged in libs/
 
  * catch2 (unit testing)
  * rapidjson (streaming from receiver)
- * pybind11 (python bindings)  
- * qwt (gui plotting)
- * libzmq (streaming to/from receiver)
+ * pybind11 (python bindings)  

docs/src/detector.rst

@@ -1,17 +1,15 @@
 Detector
 ==============================================
 
-The sls::Detector is the public API to control 
+The sls::Detector is the new public API to control 
 detectors from C++. This API is also used internally
 for the Python bindings and the command line interface. 
-If a receiver has been configured, this is also controlled
+If a receiver has been configured this is also controlled
 through this class.
 
 Most, if not all, functions are called in parallel
 and the return value is a thin std::vector wrapper 
-containing results from all modules. (:ref:`Result class<Result Class>`)
-
-Here are some :ref:`examples <Cplusplus Api Examples>` on how to use the API.
+containing results from all modules. (Result<T>)
 
 .. doxygenclass:: sls::Detector
    :members:

docs/src/examples.rst

@@ -1,4 +1,3 @@
-.. _Cplusplus Api Examples:
 
 
 
@@ -54,8 +53,8 @@ then set up the detector.
 
     jungfrauDetectorServer_virtual
 
-This launches a virtual Jungfrau detector server. As default it uses port 1952 and 1953
-for communication over TCP. Most commands go on 1952 and only a few such as stop and status on 1953. 
+This launches a virtual Jungfrau detector server. As default is uses port 1952 and 1953
+for communication over TCP. Most commands go on 1952 and only stop and status on 1953. 
 
 **Run example to configure**
 
@@ -91,10 +90,7 @@ std::vector.
     sls::Result<int> res1{1, 1, 1};
     std::cout << "res1: " << res1 << '\n';
     res1.squash();
-    # return -1 if different
     res1.squash(-1);
-    # throw exception with custom message if different
-    res1.tsquash("Values are different);
 
 
 

docs/src/fileformat.rst

@@ -1,62 +0,0 @@
-File format
-================================
-
-If `fwrite <commandline.html#term-fwrite-0-1>`_ is enabled, the receiver will write data to files. 
-
-Number of Files
-----------------
-
-Every acquisition will create a master file and data files. 
-
-An acquisition can have multiple data files for a single frame. The number of files is determined by the number of UDP ports per module and the number of modules.
-
-    * Every modules has its own receiver process. Every receiver process can have 1 or 2 UDP ports.
-    * Each UDP port will create its own file. Therefore, each receiver can write 1 or 2 files.
-    * So, for example a detector with 4 modules with 2 UDP ports each will create a total of 8 files with file names containing UDP port index **'_d0'** to **'_d7'**.
-
-A new file containing **'_f[file_index]'** in file name is also created when reaching the maximum frames per file. Configured using `rx_framesperfile <commandline.html#term-rx_framesperfile-n_frames>`_.
-
-.. _file name format:
-
-Naming
--------
-| Master File Name: [fpath]/[fname]_master_[findex].[ext]
-
-
-| Data File Name: [fpath]/[fname]_dx_fy_[findex].[ext] 
-
-   * fpath: file path set using command `fpath <commandline.html#term-fpath-path>`_. Default: '/'
-   * fname: file name prefix using command `fname <commandline.html#term-fname-name>`_. Default: "run"
-   * findex: acquisition index using command `findex <commandline.html#term-findex-n_value>`_. Automatically incremented for every acquisition with `sls_detector_acquire <commandline.html#term-acquire>`_ (if `fwrite <commandline.html#term-fwrite-0-1>`_ enabled).
-   * x: unique udp port index. New file per UDP port.
-   * y: file index. New file created after reaching max frames per file.
-   * ext: file extension. Default: "raw"(data file) or "json"(master file)
-
-
-Some file name examples:
-
-    .. code-block:: bash
-
-        # first file
-        path-to-file/run_d0_f0_0.raw
-
-        # first file for second UDP port
-        path-to-file/run_d1_f0_0.raw
-
-        # second file after reaching max frames in first file
-        path-to-file/run_d0_f1_0.raw
-        
-        # second acquisition, first file
-        path-to-file/run_d0_f0_1.raw
-
-
-Formats
---------
-
-There are 2 file formats supported by the receiver:
-
-    * Binary - extension .json (master file) or .raw (data files)
-    * HDF5 - extension .h5
-
-The default is binary. HDF5 can be enabled by compiling the package with HDF5 option enabled. The file format is set using the command `fformat <commandline.html#term-fformat-binary-hdf5>`_.
-

docs/src/firmware.rst

@@ -92,40 +92,25 @@ Download
 Upgrade
 ^^^^^^^^
 
-.. warning ::
-
-    In case you have had issues in the past with programming via software:
-
-    * 6.1.2 server has a fix for seamless fpga programming
-
-    * We recommend first updating the on-board detector server to 6.1.2 (with client 6.1.x) using command `updatedetectorserver <commandline.html#term-updatedetectorserver-server_name-with-full-path>`_.
-
-    * Then use command 'programfpga' to only update firmware or use command 'update' to update firmware and server to the latest release.
+.. note :: 
 
+    These instructions are for upgrades from v5.0.0. For earlier versions, contact us.
 
 
 Check :ref:`firmware troubleshooting <blackfin firmware troubleshooting>` if you run into issues while programming firmware.
 
-
+Always ensure that the client and server software are of the same release.
 
 
 Program from console
     .. code-block:: bash
 
-        # These instructions are for upgrades from v5.0.0. For earlier versions, please contact us.
-
-        # Always ensure that the client and server software are of the same release.
-
-        # copies server, links new server to jungfrauDetectorServer, 
+        # copies server from tftp folder of pc, links new server to jungfrauDetectorServer, 
         # removes old server from respawn, sets up new lnked server to respawn
-        # programs fpga, reboots
-
-        #  older versions: v5.0.0 - 6.0.0 using tftp from tftp folder of pc
+        # programs fpga,
+        # reboots
         sls_detector_put update jungfrauDetectorServervxxx pcxxx xx.pof
 
-        # v6.1.1 - present (copies server from the full path provided)
-        sls_detector_put update jungfrauDetectorServervxxx xx.pof
-
         # Or only program firmware
         sls_detector_put programfpga xxx.pof
 
@@ -170,6 +155,10 @@ Upgrade
 Mythen III
 -----------
 
+.. note :: 
+
+  As it is still in development, the rbf files must be picked up from us.
+
 Download 
 ^^^^^^^^^^^^^
 
@@ -181,21 +170,16 @@ Download
 Upgrade
 ^^^^^^^^
 
+Always ensure that the client and server software are of the same release.
+
 Program from console
     .. code-block:: bash
 
-        # Always ensure that the client and server software are of the same release.
-
-        # copies server, links new server to mythen3DetectorServer, 
-        # removes old server from respawn, sets up new lnked server to respawn
-        # programs fpga, reboots
-
-        #  older versions: v5.0.0 - 6.0.0 using tftp from tftp folder of pc
+        # copies server from tftp folder of pc, links new server to mythen3DetectorServer, 
+        # programs fpga,
+        # reboots
         sls_detector_put update mythen3DetectorServervxxx pcxxx xxx.rbf
 
-        # v6.1.1 - present (copies server from the full path provided)
-        sls_detector_put update mythen3DetectorServervxxx xxx.rbf
-
         # Or only program firmware
         sls_detector_put programfpga xxx.rbf
 
@@ -215,21 +199,16 @@ Download
 Upgrade
 ^^^^^^^^
 
+Always ensure that the client and server software are of the same release.
+
 Program from console
     .. code-block:: bash
 
-        # Always ensure that the client and server software are of the same release.
-        
-        # copies server, links new server to gotthard2DetectorServer, 
-        # removes old server from respawn, sets up new lnked server to respawn
-        # programs fpga, reboots
-
-        #  older versions: v5.0.0 - 6.0.0 using tftp from tftp folder of pc
+        # copies server from tftp folder of pc, links new server to gotthard2DetectorServer, 
+        # programs fpga,
+        # reboots
         sls_detector_put update gotthard2DetectorServervxxx pcxxx xxx.rbf
 
-        # v6.1.1 - present (copies server from the full path provided)
-        sls_detector_put update gotthard2DetectorServervxxx xxx.rbf
-
         # Or only program firmware
         sls_detector_put programfpga xxx.rbf
 
@@ -251,36 +230,19 @@ Download
 Upgrade
 ^^^^^^^^
 
-.. warning ::
-
-    In case you have had issues in the past with programming via software:
-
-    * 6.1.2 server has a fix for seamless fpga programming
-
-    * We recommend first updating the on-board detector server to 6.1.2 (with client 6.1.x) using command `updatedetectorserver <commandline.html#term-updatedetectorserver-server_name-with-full-path>`_.
-
-    * Then use command 'programfpga' to only update firmware or use command 'update' to update firmware and server to the latest release.
-
-
-
 Check :ref:`firmware troubleshooting <blackfin firmware troubleshooting>` if you run into issues while programming firmware.
 
+Always ensure that the client and server software are of the same release.
 
 Program from console
     .. code-block:: bash
 
-        # Always ensure that the client and server software are of the same release.
-
-        # copies server, links new server to moenchDetectorServer, 
+        # copies server from tftp folder of pc, links new server to moenchDetectorServer, 
         # removes old server from respawn, sets up new lnked server to respawn
-        # programs fpga, reboots
-
-        #  older versions: v5.0.0 - 6.0.0 using tftp from tftp folder of pc
+        # programs fpga,
+        # reboots
         sls_detector_put update moenchDetectorServervxxx pcxxx xx.pof
 
-        # v6.1.1 - present (copies server from the full path provided)
-        sls_detector_put update moenchDetectorServervxxx xx.pof
-
         # Or only program firmware
         sls_detector_put programfpga xxx.pof
 
@@ -300,22 +262,17 @@ Upgrade
 
 Check :ref:`firmware troubleshooting <blackfin firmware troubleshooting>` if you run into issues while programming firmware.
 
+Always ensure that the client and server software are of the same release.
 
 Program from console
     .. code-block:: bash
 
-        # Always ensure that the client and server software are of the same release.
-        
-        # copies server, links new server to ctbDetectorServer, 
+        # copies server from tftp folder of pc, links new server to ctbDetectorServer, 
         # removes old server from respawn, sets up new lnked server to respawn
-        # programs fpga, reboots
-
-        #  older versions: v5.0.0 - 6.0.0 using tftp from tftp folder of pc
+        # programs fpga,
+        # reboots
         sls_detector_put update ctbDetectorServervxxx pcxxx xx.pof
 
-        # v6.1.1 - present (copies server from the full path provided)
-        sls_detector_put update ctbDetectorServervxxx xx.pof
-
         # Or only program firmware
         sls_detector_put programfpga xxx.pof
 

docs/src/gendoc.cpp

@@ -11,7 +11,7 @@
 #include <string>
 #include <vector>
 
-#include "Caller.h"
+#include "CmdProxy.h"
 #include "sls/Detector.h"
 #include "sls/sls_detector_defs.h"
 
@@ -37,8 +37,8 @@ int main() {
 
     std::cout << "Generating command line documentation!\n";
 
-    sls::Caller caller(nullptr);
-    auto commands = caller.getAllCommands();
+    sls::CmdProxy proxy(nullptr);
+    auto commands = proxy.GetProxyCommands();
 
     std::ofstream fs("commands.rst");
     fs << ".. glossary::\n";
@@ -46,7 +46,7 @@ int main() {
     for (const auto &cmd : commands) {
         std::ostringstream os;
         std::cout << cmd << '\n';
-        caller.call(cmd, {}, -1, slsDetectorDefs::HELP_ACTION, os);
+        proxy.Call(cmd, {}, -1, slsDetectorDefs::HELP_ACTION, os);
 
         auto tmp = os.str().erase(0, cmd.size());
         auto usage = tmp.substr(0, tmp.find_first_of('\n'));
@@ -55,9 +55,9 @@ int main() {
         fs << '\t' << cmd << usage << help << "\n";
     }
 
-    std::ofstream fs2("deprecated.csv");
+    std::ofstream fs2("depreciated.csv");
     fs2 << "Old, New\n";
-    auto cmds = caller.GetDeprecatedCommands();
+    auto cmds = proxy.GetDepreciatedCommands();
     for (auto it : cmds) {
         fs2 << it.first << ", " << it.second << '\n';
     }

docs/src/hdf5fileformat.rst

@@ -1,89 +0,0 @@
-
-
-HDF5 File Format
-================================
-
-Compilation
--------------
-
-#. Compile the package with HDF5 option enabled
-
-    #. Using cmk script: ./cmk.sh -hj9 -d [path of hdf5 dir] (-d is optional and for custom installation folder)
-
-    #. Enable using cmake option **-DSLS_USE_HDF5=ON** and **-DCMAKE_INSTALL_PREFIX=/path/to/custom/hdf/installation** (optional).
-
-
-Setup
--------
-
-#. Start Receiver process
-
-#. Load config file
-
-#. Set file format using command `fformat <commandline.html#term-fformat-binary-hdf5>`_.
-
-    .. code-block:: bash
-
-        sls_detector_put fformat hdf5
-
-
-Master File
--------------
-
-* File Name: [fpath]/[fname]_master_[findex].h5 :ref:`Details here<file name format>`
-
-* It contains  :ref:`attributes<master file attributes>` relevant to the acquisition. This can vary with detector type.
-
-.. code-block:: text
-
-    /                                               # Root level
-    |---> entry                                     # entry group
-    |    |---> data                                 # data group
-    |         |---> column                          # dataset of each sls_receiver_header member
-    |         |---> data
-    |         |---> detector header version
-    |         |---> detector specific 1
-    |         |---> detector specific 2
-    |         |---> detector specific 3
-    |         |---> detector specific 4
-    |         |---> detector type
-    |         |---> exp length or sub exposure time
-    |         |---> frame number
-    |         |---> mod id
-    |         |---> packets caught
-    |         |---> packets caught bit mask
-    |         |---> row
-    |         |---> timestamp
-    |    |---> instrument                           # instrument group
-    |         |---> beam                            # beam group
-    |         |---> detector                        # detector group
-    |              |---> Master File Attribute 1    # dataset of each master file attribute
-    |              |---> Master File Attribute 2
-    |              |---> Master File Attribute 3
-    |              |---> Master File Attribute ..
-    |    |---> sample                               # sample group
-
-
-If more than 1 data file per frame:
-    * The dataset of each :ref:`**SLS Receiver Header** <sls receiver header format>` member is a virtual dataset.
-    * **data** dataset is a virtual dataset.
-
-
-More details regarding master file attributes can be found :ref:`here<master file attributes>`.
-
-Data File
------------
-
-* File Name: [fpath]/[fname]_dx_fy_[findex].h5 :ref:`Details here<file name format>`
-
-
-Virtual Data File
-------------------
-
-* File Name: [fpath]/[fname]_virtual_[findex].h5 :ref:`Details here<file name format>`
-
-* For multiple modules, a virtual file linking data from all the modules is created. The individual files are expected to be present.
-
-* It is linked in the master file.
-
-

docs/src/index.rst

@@ -8,11 +8,11 @@ Welcome to slsDetectorPackage's documentation!
 
 .. note :: 
 
-    This is the documentation for the latest development version of slsDetectorPackage.
-    For further documentation, visit the official page: https://www.psi.ch/en/detectors/documentation
+    This is the documentation for the latest development version of slsDetectorPackage
+    For documentation on current and previous releases visit the official page: https://www.psi.ch/en/detectors/documentation
 
 .. toctree::
-    :maxdepth: 3
+    :maxdepth: 1
     :caption: Installation:
 
     installation
@@ -39,7 +39,7 @@ Welcome to slsDetectorPackage's documentation!
 
 .. toctree::
     :caption: Command line
-    :maxdepth: 1
+    :maxdepth: 2
 
     commandline  
     quick_start_guide
@@ -66,38 +66,12 @@ Welcome to slsDetectorPackage's documentation!
     virtualserver
     serverdefaults
 
-
-.. toctree::
-    :caption: Detector UDP Header
-    :maxdepth: 2
-
-    udpheader
-    udpconfig
-    udpdetspec
-
 .. toctree::
     :caption: Receiver
     :maxdepth: 2
 
-    slsreceiver
     receivers
-    
-
-.. toctree::
-    :caption: Receiver Files
-    :maxdepth: 3
-
-    fileformat
-    slsreceiverheaderformat
-    masterfileattributes
-    binaryfileformat
-    hdf5fileformat
-
-.. toctree::
-    :caption: Receiver ZMQ Stream
-    :maxdepth: 2
-
-    zmqjsonheaderformat
+    slsreceiver
 
 .. toctree::
     :caption: Troubleshooting

docs/src/installation.rst

@@ -1,52 +1,100 @@
 
 
+
+.. note :: 
+
+    The default branch of our git repository is developer. It contains the 
+    latest development version. It is expected to compile and work but 
+    features might be added or tweaked. In some cases the API might also change
+    without being communicated. If absolute stability of the API is needed please
+    use one of the release versions. 
+
+.. warning ::
+    
+    Before building from source make sure that you have the 
+    :doc:`dependencies <../dependencies>` installed. If installing using conda, conda will 
+    manage the dependencies.
+    
+
 .. _Installation:
 
-
 Installation
-===============
+==============================================
 
-.. contents::
-   :local:
-   :depth: 2
-   :backlinks: top
+.. _build from source using cmake:
+
+Build from source using CMake
+---------------------------------
+
+Note that on some systems, for example RH7,  cmake v3+ is available under the cmake3 alias.
+It is also required to clone with the option --recursive to get the git submodules used
+in the package. 
 
 
-Overview
---------------
+.. code-block:: bash
 
-The ``slsDetectorPackage`` provides core detector software implemented in C++, along with Python bindings packaged as the ``slsdet`` Python extension module. Choose the option that best fits your environment and use case.
+    git clone --recursive https://github.com/slsdetectorgroup/slsDetectorPackage.git
+    mkdir build && cd build
+    cmake ../slsDetectorPackage -DCMAKE_INSTALL_PREFIX=/your/install/path
+    make -j12 #or whatever number of cores you are using to build
+    make install
 
-:ref:`conda pre-built binaries`: 
-Install pre-built binaries for the C++ client, receiver, GUI and the Python API (``slsdet``), simplifying setup across platforms.
+The easiest way to configure options is to use the ccmake utility. 
 
-:ref:`pip`:
-Install only the Python extension module, either by downloading the pre-built library from PyPI or by building the extension locally from source. Available only from v9.2.0 onwards.
+.. code-block:: bash
 
-:ref:`build from source`: 
-Compile the entire package yourself, including both the C++ core and the Python bindings, for maximum control and customization. However, make sure that you have the :doc:`dependencies <../dependencies>` installed. If installing using conda, conda will manage the dependencies. Avoid installing packages with pip and conda simultaneously.
+    #from the build directory
+    ccmake .
 
 
+Build using cmk.sh script
+-------------------------
+These are mainly aimed at those not familiar with using ccmake and cmake.
 
-   
-.. _conda pre-built binaries:
+.. code-block:: bash
 
-1. Install pre-built binaries using conda (Recommended)
---------------------------------------------------------
+    The binaries are generated in slsDetectorPackage/build/bin directory.
+
+    Usage: $0 [-c] [-b] [-p] [e] [t] [r] [g] [s] [u] [i] [m] [n] [-h] [z] [-d <HDF5 directory>] [-l Install directory] [-k <CMake command>] [-j <Number of threads>]
+    -[no option]: only make
+    -c: Clean
+    -b: Builds/Rebuilds CMake files normal mode
+    -p: Builds/Rebuilds Python API
+    -h: Builds/Rebuilds Cmake files with HDF5 package
+    -d: HDF5 Custom Directory
+    -k: CMake command
+    -l: Install directory
+    -t: Build/Rebuilds only text client
+    -r: Build/Rebuilds only receiver
+    -g: Build/Rebuilds only gui
+    -s: Simulator
+    -u: Chip Test Gui
+    -j: Number of threads to compile through
+    -e: Debug mode
+    -i: Builds tests
+    -m: Manuals
+    -n: Manuals without compiling doxygen (only rst)
+    -z: Moench zmq processor
+    
+    # get all options
+    ./cmk.sh -?
+
+    # new build  and compile in parallel:
+    ./cmk.sh -bj5
+
+
+Install binaries using conda
+--------------------------------
 
 Conda is not only useful to manage python environments but can also
-be used as a user space package manager. Dates in the tag (for eg. 2020.07.23.dev0) 
-are from the developer branch. Please use released tags for stability.
+be used as a user space package manager. 
+
+We have three different packages available:
+
+ * **slsdetlib**, shared libraries and command line utilities 
+ * **slsdetgui**, GUI
+ * **slsdet**, Python bindings
 
-We have four different packages available:
-    ==============     =============================================
-    Package             Description
-    ==============     =============================================
-    slsdetlib           shared libraries and command line utilities 
-    slsdetgui           GUI
-    slsdet              Python bindings
-    moenchzmq           moench
-    ==============     =============================================
 
 .. code-block:: bash
 
@@ -55,170 +103,24 @@ We have four different packages available:
     conda config --add channels slsdetectorgroup
     conda config --set channel_priority strict
 
-    #create and activate an environment with our library
-    #replace 6.1.1 with the required tag
-    conda create -n myenv slsdetlib=6.1.1
+    #cerate an environment with our library, then activate
+    #replace 2020.07.20.dev0 with the required tag
+    conda create -n myenv slsdetlib=2020.07.23.dev0
     conda activate myenv
 
     #ready to use
     sls_detector_get exptime
-    ...
+    etc ...
 
 
 .. code-block:: bash
 
     #List available versions
-    # lib and binaries
-    conda search slsdetlib
-    # python
     conda search slsdet
-    # gui
-    conda search slsdetgui
-    # moench
-    conda search moenchzmq
 
 
-.. _pip:
-
-2. Pip
--------
-The Python extension module ``slsdet`` can be installed using pip. This is available from v9.2.0 onwards.
-
-.. code-block:: bash
-    
-    #Install the Python extension module from PyPI
-    pip install slsdet
-
-    # or install the python extension locally from source
-    git clone https://github.com/slsdetectorgroup/slsDetectorPackage.git --branch 9.2.0
-    cd slsDetectorPackage
-    pip install .
-
-
-.. _build from source:
-
-3. Build from source
--------------------------
-
-3.1. Download Source Code from github
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. code-block:: bash
-
-    git clone https://github.com/slsdetectorgroup/slsDetectorPackage.git --branch 6.1.1
-
-.. note ::   
-
-      For v6.x.x of slsDetectorPackage and older, refer :ref:`pybind11 notes on cloning. <pybind for different slsDetectorPackage versions>`  
-
-.. _build from source using cmake:
-
-
-
-3.2. Build from Source
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-One can either build using cmake or use the in-built cmk.sh script.
-
-3.2.1. Build using CMake
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. code-block:: bash
-
-    # outside slsDetecorPackage folder
-    mkdir build && cd build
-
-    # configure & generate Makefiles using cmake
-    # by listing all your options (alternately use ccmake described below)
-    # cmake3 for some systems
-    cmake ../slsDetectorPackage -DCMAKE_INSTALL_PREFIX=/your/install/path
-
-    # compiled to the build/bin directory
-    make -j12 #or whatever number of cores you are using to build
-
-    # install headers and libs in /your/install/path directory
-    make install
-
-
-Instead of the cmake command, one can use ccmake to get a list of options to configure and generate Makefiles at ease.
-
-.. code-block:: bash
-
-    # ccmake3 for some systems
-    ccmake ..
- 
-    # choose the options
-    # first press [c] - configure (until you see [g])
-    # then press [g] - generate
-
-
-===============================     ===============================
-Example cmake options               Comment
-===============================     ===============================
--DSLS_USE_PYTHON=ON                 Python
--DPython_FIND_VIRTUALENV=ONLY       Python from the conda env 
--DSLS_USE_GUI=ON                    GUI
--DSLS_USE_HDF5=ON                   HDF5
--DSLS_USE_SIMULATOR=ON              Simulator
-===============================     ===============================
-
-.. note ::   
-
-    For v7.x.x of slsDetectorPackage and older, refer :ref:`zeromq notes for cmake option to hint library location. <zeromq for different slsDetectorPackage versions>` 
-
-
-3.2.2. Build using in-built cmk.sh script
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-
-.. code-block:: bash
-
-    The binaries are generated in slsDetectorPackage/build/bin directory.
-
-    Usage: $0 [-b] [-c] [-d <HDF5 directory>] [-e] [-g] [-h] [-i] 
-    [-j <Number of threads>] [-k <CMake command>] [-l <Install directory>] 
-    [-m] [-n] [-p] [-r] [-s] [-t] [-u] [-z]  
-    -[no option]: only make
-    -b: Builds/Rebuilds CMake files normal mode
-    -c: Clean
-    -d: HDF5 Custom Directory
-    -e: Debug mode
-    -g: Build/Rebuilds gui
-    -h: Builds/Rebuilds Cmake files with HDF5 package
-    -i: Builds tests
-    -j: Number of threads to compile through
-    -k: CMake command
-    -l: Install directory
-    -m: Manuals
-    -n: Manuals without compiling doxygen (only rst)
-    -p: Builds/Rebuilds Python API
-    -r: Build/Rebuilds only receiver
-    -s: Simulator
-    -t: Build/Rebuilds only text client
-    -u: Chip Test Gui
-    -z: Moench zmq processor
-
-    
-    # display all options
-    ./cmk.sh -?
-
-    # new build and compile in parallel (recommended basic option):
-    ./cmk.sh -cbj5
-
-    # new build, python and compile in parallel:
-    ./cmk.sh -cbpj5
-
-    #For rebuilding only certain sections
-    ./cmk.sh -tg #only text client and gui
-    ./cmk.sh -r #only receiver
-
-.. note ::   
-
-    For v7.x.x of slsDetectorPackage and older, refer :ref:`zeromq notes for cmk script option to hint library location. <zeromq for different slsDetectorPackage versions>` 
-
-
-3.3. Build on old distributions using conda
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Build from source on old distributions
+-----------------------------------------
 
 If your linux distribution doesn't come with a C++11 compiler (gcc>4.8) then 
 it's possible to install a newer gcc using conda and build the slsDetectorPackage
@@ -227,84 +129,14 @@ using this compiler
 .. code-block:: bash
 
     #Create an environment with the dependencies
-    conda create -n myenv gxx_linux-64 cmake
+    conda create -n myenv gxx_linux-64 cmake zmq
     conda activate myenv
-
-    # outside slsDetecorPackage folder
-    mkdir build && cd build
     cmake ../slsDetectorPackage -DCMAKE_PREFIX_PATH=$CONDA_PREFIX
     make -j12
 
 
-.. note ::   
-
-    For v7.x.x of slsDetectorPackage and older, refer :ref:`zeromq notes for dependencies for conda. <zeromq for different slsDetectorPackage versions>` 
-
-
-
-3.4. Build slsDetectorGui (Qt5)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-1. Using pre-built binary on conda
-
-    .. code-block:: bash
-
-        conda create -n myenv slsdetgui=7.0.0
-        conda activate myenv
-
-
-2. Using system installation on RHEL7
-
-    .. code-block:: bash
-
-        yum install qt5-qtbase-devel.x86_64
-        yum install qt5-qtsvg-devel.x86_64 
-
-3. Using system installation on RHEL8
-
-    .. code-block:: bash
-
-        yum install qt5-qtbase-devel.x86_64
-        yum install qt5-qtsvg-devel.x86_64 
-        yum install expat-devel.x86_64
-
-4. Using conda
-
-    .. code-block:: bash
-
-        #Add channels for dependencies and our library
-        conda config --add channels conda-forge
-        conda config --add channels slsdetectorgroup
-        conda config --set channel_priority strict
-
-        # create environment to compile
-        # on rhel7
-        conda create -n slsgui gxx_linux-64 gxx_linux-64 mesa-libgl-devel-cos6-x86_64 qt
-        # on fedora or newer systems
-        conda create -n slsgui qt
-
-        # when using conda compilers, would also need libgl, but no need for it on fedora unless maybe using it with ROOT
-
-        # activate environment
-        conda activate slsgui
-
-        # compile with cmake outside slsDetecorPackage folder
-        mkdir build && cd build
-        cmake ../slsDetectorPackage -DSLS_USE_GUI=ON
-        make -j12
-
-        # or compile with cmk.sh
-        cd slsDetectorPackage
-        ./cmk.sh -cbgj9
-
-.. note ::   
-
-    For v7.x.x of slsDetectorPackage and older, refer :ref:`zeromq notes for dependencies for conda. <zeromq for different slsDetectorPackage versions>` 
-
-
-
-3.5. Build this documentation
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Build this documentation
+-------------------------------
 
 The documentation for the slsDetectorPackage is build using a combination 
 of Doxygen, Sphinx and Breathe. The easiest way to install the dependencies
@@ -312,65 +144,11 @@ is to use conda
 
 .. code-block:: bash
 
-    conda create -n myenv python=3.12 sphinx sphinx_rtd_theme breathe doxygen numpy
+    conda create -n myenv python sphinx sphinx_rtd_theme
 
+Then enable the option SLS_BUILD_DOCS to create the targets
 
 .. code-block:: bash
 
-    # using cmake or ccmake to enable DSLS_BUILD_DOCS
-    # outside slsDetecorPackage folder
-    mkdir build && cd build
-    cmake ../slsDetectorPackage -DSLS_BUILD_DOCS=ON
-
     make docs # generate API docs and build Sphinx RST
-    make rst # rst only, saves time in case the API did not change
-
-
-4. Pybind and Zeromq
--------------------------
-
-.. _pybind for different slsDetectorPackage versions:
-
-
-| **Pybind11 for Python**
-| v8.0.0+: 
-|   pybind11 is built
-|   * by default from tar file in repo (libs/pybind/v2.1x.0.tar.gz) 
-|   * or use advanced option SLS_FETCH_PYBIND11_FROM_GITHUB [`link <https://github.com/pybind/pybind11>`__].
-|      * v9.0.0+: pybind11 (v2.13.6)
-|      * v8.x.x : pybind11 (v2.11.0)
-|
-| v7.x.x:
-|   pybind11 packaged into 'libs/pybind'. No longer a submodule. No need for "recursive" or "submodule update".
-| 
-| Older versions:
-|   pybind11 is a submodule. Must be cloned using "recursive" and updated when switching between versions using the following commands.
-
-.. code-block:: bash
-
-    # Note: Only for v6.x.x versions and older
-
-    # clone using recursive to get pybind11 submodule
-    git clone --recursive https://github.com/slsdetectorgroup/slsDetectorPackage.git
-
-    # update submodule when switching between releases
-    cd slsDetectorPackage
-    git submodule update --init
-
-
-.. _zeromq for different slsDetectorPackage versions:
-
-
-
-| **Zeromq**
-| v8.0.0+:
-|   zeromq (v4.3.4) is built 
-|   * by default from tar file in repo (libs/libzmq/libzmq-4.3.4.tar.gz) 
-|   * or use advanced option SLS_FETCH_ZMQ_FROM_GITHUB [`link <https://github.com/zeromq/libzmq.git>`__].
-|
-| v7.x.x and older:
-|   zeromq-devel must be installed and one can hint its location using
-|   * cmake option:'-DZeroMQ_HINT=/usr/lib64' or 
-|   * option '-q' in cmk.sh script: : ./cmk.sh -cbj5 -q /usr/lib64
-|   * 'zeromq' dependency added when installing using conda
-
+    make rst # rst only, saves time in case the API did not change

docs/src/masterfileattributes.rst

@@ -1,409 +0,0 @@
-
-.. _master file attributes:
-
-Master File Attributes
-=======================
-
-These attributes are the same in binary and HDF5 file, but vary depending on detector type.
-
-
-Eiger
-^^^^^
-
-   +-----------------------+-------------------------------------------------+
-   | **Key**               | **Description**                                 |
-   +-----------------------+-------------------------------------------------+
-   | Version               | Version of the master file                      |
-   |                       | Current value:8.0                               |
-   +-----------------------+-------------------------------------------------+
-   | Timestamp             | Timestamp of creation of master file            |
-   +-----------------------+-------------------------------------------------+
-   | Detector Type         | Detector type                                   |
-   +-----------------------+-------------------------------------------------+
-   | Timing Mode           | Timing Mode                                     |
-   +-----------------------+-------------------------------------------------+
-   | Geometry              | Number of UDP ports in x and y dimension for    |
-   |                       | complete detector                               |
-   +-----------------------+-------------------------------------------------+
-   | Image Size in bytes   | Image size in bytes per UDP port                |
-   +-----------------------+-------------------------------------------------+
-   | Pixels                | Number of pixels in x and y dimension           |
-   |                       | per UDP port                                    |
-   +-----------------------+-------------------------------------------------+
-   | Max Frames Per File   | Maximum frames per file                         |
-   +-----------------------+-------------------------------------------------+
-   | Frame Discard Policy  | Receiever Frame discard policy                  |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Frame Padding         | Receiver Frame padding enable                   |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Scan Parameters       | Scanning mode on detector                       |
-   +-----------------------+-------------------------------------------------+
-   | Total Frames          | Total number of frames and triggers expected    |
-   +-----------------------+-------------------------------------------------+
-   | Receiver Roi          | Receiver ROI in file including xmax and ymax    |
-   +-----------------------+-------------------------------------------------+
-   | Dynamic Range         | Bits per pixel                                  |
-   +-----------------------+-------------------------------------------------+
-   | Ten Giga              | 10GbE enable for data                           |
-   +-----------------------+-------------------------------------------------+
-   | Exptime               | Exposure time                                   |
-   +-----------------------+-------------------------------------------------+
-   | Period                | Period between frames                           |
-   +-----------------------+-------------------------------------------------+
-   | Threshold Energy      | Threshold energy                                |
-   +-----------------------+-------------------------------------------------+
-   | Sub Exptime           | Sub exposure time in 32 bit mode                |
-   +-----------------------+-------------------------------------------------+
-   | Sub Period            | Sub period between frames in 32 bit mode        |
-   +-----------------------+-------------------------------------------------+
-   | Quad                  | Quad enable (hardware)                          |
-   +-----------------------+-------------------------------------------------+
-   | Number of rows        | Number of rows enabled for readout              |
-   +-----------------------+-------------------------------------------------+
-   | Rate Corrections      | Rate Corrections                                |
-   +-----------------------+-------------------------------------------------+
-   | Frames in File        | Number of frames written to file by Receiver 0  |
-   +-----------------------+-------------------------------------------------+
-   | Frame Header Format   | Expected frame header format for the data files |
-   +-----------------------+-------------------------------------------------+
-
-
-Jungfrau
-^^^^^^^^
-
-   +-----------------------+-------------------------------------------------+
-   | **Key**               | **Description**                                 |
-   +-----------------------+-------------------------------------------------+
-   | Version               | Version of the master file                      |
-   |                       | Current value:8.0                               |
-   +-----------------------+-------------------------------------------------+
-   | Timestamp             | Timestamp of creation of master file            |
-   +-----------------------+-------------------------------------------------+
-   | Detector Type         | Detector type                                   |
-   +-----------------------+-------------------------------------------------+
-   | Timing Mode           | Timing Mode                                     |
-   +-----------------------+-------------------------------------------------+
-   | Geometry              | Number of UDP ports in x and y dimension for    |
-   |                       | complete detector                               |
-   +-----------------------+-------------------------------------------------+
-   | Image Size in bytes   | Image size in bytes per UDP port                |
-   +-----------------------+-------------------------------------------------+
-   | Pixels                | Number of pixels in x and y dimension           |
-   |                       | per UDP port                                    |
-   +-----------------------+-------------------------------------------------+
-   | Max Frames Per File   | Maximum frames per file                         |
-   +-----------------------+-------------------------------------------------+
-   | Frame Discard Policy  | Receiever Frame discard policy                  |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Frame Padding         | Receiver Frame padding enable                   |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Scan Parameters       | Scanning mode on detector                       |
-   +-----------------------+-------------------------------------------------+
-   | Total Frames          | Total number of frames and triggers expected    |
-   +-----------------------+-------------------------------------------------+
-   | Receiver Roi          | Receiver ROI in file including xmax and ymax    |
-   +-----------------------+-------------------------------------------------+
-   | Exptime               | Exposure time                                   |
-   +-----------------------+-------------------------------------------------+
-   | Period                | Period between frames                           |
-   +-----------------------+-------------------------------------------------+
-   | Number of UDP         | Number of UDP Interfaces enabled per module     |
-   | Interfaces            |                                                 |
-   +-----------------------+-------------------------------------------------+
-   | Number of rows        | Number of rows enabled for readout              |
-   +-----------------------+-------------------------------------------------+
-   | Frames in File        | Number of frames written to file by Receiver 0  |
-   +-----------------------+-------------------------------------------------+
-   | Frame Header Format   | Expected frame header format for the data files |
-   +-----------------------+-------------------------------------------------+
-
-Gotthard II
-^^^^^^^^^^^^
-
-   +-----------------------+-------------------------------------------------+
-   | **Key**               | **Description**                                 |
-   +-----------------------+-------------------------------------------------+
-   | Version               | Version of the master file                      |
-   |                       | Current value:8.0                               |
-   +-----------------------+-------------------------------------------------+
-   | Timestamp             | Timestamp of creation of master file            |
-   +-----------------------+-------------------------------------------------+
-   | Detector Type         | Detector type                                   |
-   +-----------------------+-------------------------------------------------+
-   | Timing Mode           | Timing Mode                                     |
-   +-----------------------+-------------------------------------------------+
-   | Geometry              | Number of UDP ports in x and y dimension for    |
-   |                       | complete detector                               |
-   +-----------------------+-------------------------------------------------+
-   | Image Size in bytes   | Image size in bytes per UDP port                |
-   +-----------------------+-------------------------------------------------+
-   | Pixels                | Number of pixels in x and y dimension           |
-   |                       | per UDP port                                    |
-   +-----------------------+-------------------------------------------------+
-   | Max Frames Per File   | Maximum frames per file                         |
-   +-----------------------+-------------------------------------------------+
-   | Frame Discard Policy  | Receiever Frame discard policy                  |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Frame Padding         | Receiver Frame padding enable                   |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Scan Parameters       | Scanning mode on detector                       |
-   +-----------------------+-------------------------------------------------+
-   | Total Frames          | Total number of frames and triggers expected    |
-   +-----------------------+-------------------------------------------------+
-   | Receiver Roi          | Receiver ROI in file including xmax and ymax    |
-   +-----------------------+-------------------------------------------------+
-   | Exptime               | Exposure time                                   |
-   +-----------------------+-------------------------------------------------+
-   | Period                | Period between frames                           |
-   +-----------------------+-------------------------------------------------+
-   | Burst Mode            | Burst mode of detector                          |
-   +-----------------------+-------------------------------------------------+
-   | Frames in File        | Number of frames written to file by Receiver 0  |
-   +-----------------------+-------------------------------------------------+
-   | Frame Header Format   | Expected frame header format for the data files |
-   +-----------------------+-------------------------------------------------+
-
-Mythen3
-^^^^^^^
-
-
-   +-----------------------+-------------------------------------------------+
-   | **Key**               | **Description**                                 |
-   +-----------------------+-------------------------------------------------+
-   | Version               | Version of the master file                      |
-   |                       | Current value:8.0                               |
-   +-----------------------+-------------------------------------------------+
-   | Timestamp             | Timestamp of creation of master file            |
-   +-----------------------+-------------------------------------------------+
-   | Detector Type         | Detector type                                   |
-   +-----------------------+-------------------------------------------------+
-   | Timing Mode           | Timing Mode                                     |
-   +-----------------------+-------------------------------------------------+
-   | Geometry              | Number of UDP ports in x and y dimension for    |
-   |                       | complete detector                               |
-   +-----------------------+-------------------------------------------------+
-   | Image Size in bytes   | Image size in bytes per UDP port                |
-   +-----------------------+-------------------------------------------------+
-   | Pixels                | Number of pixels in x and y dimension           |
-   |                       | per UDP port                                    |
-   +-----------------------+-------------------------------------------------+
-   | Max Frames Per File   | Maximum frames per file                         |
-   +-----------------------+-------------------------------------------------+
-   | Frame Discard Policy  | Receiever Frame discard policy                  |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Frame Padding         | Receiver Frame padding enable                   |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Scan Parameters       | Scanning mode on detector                       |
-   +-----------------------+-------------------------------------------------+
-   | Total Frames          | Total number of frames and triggers expected    |
-   +-----------------------+-------------------------------------------------+
-   | Receiver Roi          | Receiver ROI in file including xmax and ymax    |
-   +-----------------------+-------------------------------------------------+
-   | Dynamic Range         | Bits per pixel                                  |
-   +-----------------------+-------------------------------------------------+
-   | Ten Giga              | 10GbE enable for data                           |
-   +-----------------------+-------------------------------------------------+
-   | Period                | Period between frames                           |
-   +-----------------------+-------------------------------------------------+
-   | Counter Mask          | Mask of counters enabled                        |
-   +-----------------------+-------------------------------------------------+
-   | Exptime1              | Exposure time of counter 1                      |
-   +-----------------------+-------------------------------------------------+
-   | Exptime2              | Exposure time of counter 2                      |
-   +-----------------------+-------------------------------------------------+
-   | Exptime3              | Exposure time of counter 3                      |
-   +-----------------------+-------------------------------------------------+
-   | GateDelay1            | Gate delay of counter 1                         |
-   +-----------------------+-------------------------------------------------+
-   | GateDelay2            | Gate delay of counter 2                         |
-   +-----------------------+-------------------------------------------------+
-   | GateDelay3            | Gate delay of counter 3                         |
-   +-----------------------+-------------------------------------------------+
-   | Gates                 | Number of gates                                 |
-   +-----------------------+-------------------------------------------------+
-   | Threshold energies    | Threshold energy of all 3 counters              |
-   +-----------------------+-------------------------------------------------+
-   | Frames in File        | Number of frames written to file by Receiver 0  |
-   +-----------------------+-------------------------------------------------+
-   | Frame Header Format   | Expected frame header format for the data files |
-   +-----------------------+-------------------------------------------------+
-
-
-Moench
-^^^^^^
-
-   +-----------------------+-------------------------------------------------+
-   | **Key**               | **Description**                                 |
-   +-----------------------+-------------------------------------------------+
-   | Version               | Version of the master file                      |
-   |                       | Current value:8.0                               |
-   +-----------------------+-------------------------------------------------+
-   | Timestamp             | Timestamp of creation of master file            |
-   +-----------------------+-------------------------------------------------+
-   | Detector Type         | Detector type                                   |
-   +-----------------------+-------------------------------------------------+
-   | Timing Mode           | Timing Mode                                     |
-   +-----------------------+-------------------------------------------------+
-   | Geometry              | Number of UDP ports in x and y dimension for    |
-   |                       | complete detector                               |
-   +-----------------------+-------------------------------------------------+
-   | Image Size in bytes   | Image size in bytes per UDP port                |
-   +-----------------------+-------------------------------------------------+
-   | Pixels                | Number of pixels in x and y dimension           |
-   |                       | per UDP port                                    |
-   +-----------------------+-------------------------------------------------+
-   | Max Frames Per File   | Maximum frames per file                         |
-   +-----------------------+-------------------------------------------------+
-   | Frame Discard Policy  | Receiever Frame discard policy                  |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Frame Padding         | Receiver Frame padding enable                   |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Scan Parameters       | Scanning mode on detector                       |
-   +-----------------------+-------------------------------------------------+
-   | Total Frames          | Total number of frames and triggers expected    |
-   +-----------------------+-------------------------------------------------+
-   | Receiver Roi          | Receiver ROI in file including xmax and ymax    |
-   +-----------------------+-------------------------------------------------+
-   | Exptime               | Exposure time                                   |
-   +-----------------------+-------------------------------------------------+
-   | Period                | Period between frames                           |
-   +-----------------------+-------------------------------------------------+
-   | Number of UDP         | Number of UDP Interfaces enabled per module     |
-   | Interfaces            |                                                 |
-   +-----------------------+-------------------------------------------------+
-   | Number of rows        | Number of rows enabled for readout              |
-   +-----------------------+-------------------------------------------------+
-   | Frames in File        | Number of frames written to file by Receiver 0  |
-   +-----------------------+-------------------------------------------------+
-   | Frame Header Format   | Expected frame header format for the data files |
-   +-----------------------+-------------------------------------------------+
-
-Gotthard I
-^^^^^^^^^^^
-
-   +-----------------------+-------------------------------------------------+
-   | **Key**               | **Description**                                 |
-   +-----------------------+-------------------------------------------------+
-   | Version               | Version of the master file                      |
-   |                       | Current value:8.0                               |
-   +-----------------------+-------------------------------------------------+
-   | Timestamp             | Timestamp of creation of master file            |
-   +-----------------------+-------------------------------------------------+
-   | Detector Type         | Detector type                                   |
-   +-----------------------+-------------------------------------------------+
-   | Timing Mode           | Timing Mode                                     |
-   +-----------------------+-------------------------------------------------+
-   | Geometry              | Number of UDP ports in x and y dimension for    |
-   |                       | complete detector                               |
-   +-----------------------+-------------------------------------------------+
-   | Image Size in bytes   | Image size in bytes per UDP port                |
-   +-----------------------+-------------------------------------------------+
-   | Pixels                | Number of pixels in x and y dimension           |
-   |                       | per UDP port                                    |
-   +-----------------------+-------------------------------------------------+
-   | Max Frames Per File   | Maximum frames per file                         |
-   +-----------------------+-------------------------------------------------+
-   | Frame Discard Policy  | Receiever Frame discard policy                  |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Frame Padding         | Receiver Frame padding enable                   |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Scan Parameters       | Scanning mode on detector                       |
-   +-----------------------+-------------------------------------------------+
-   | Total Frames          | Total number of frames and triggers expected    |
-   +-----------------------+-------------------------------------------------+
-   | Receiver Roi          | Receiver ROI in file including xmax and ymax    |
-   +-----------------------+-------------------------------------------------+
-   | Exptime               | Exposure time                                   |
-   +-----------------------+-------------------------------------------------+
-   | Period                | Period between frames                           |
-   +-----------------------+-------------------------------------------------+
-   | Detector Roi          | Roi in detector restricted to an ADC.           |
-   |                       | Includes xmax                                   |
-   +-----------------------+-------------------------------------------------+
-   | Burst Mode            | Burst mode of detector                          |
-   +-----------------------+-------------------------------------------------+
-   | Frames in File        | Number of frames written to file by Receiver 0  |
-   +-----------------------+-------------------------------------------------+
-   | Frame Header Format   | Expected frame header format for the data files |
-   +-----------------------+-------------------------------------------------+
-
-Chip Test Board
-^^^^^^^^^^^^^^^
-
-
-   +-----------------------+-------------------------------------------------+
-   | **Key**               | **Description**                                 |
-   +-----------------------+-------------------------------------------------+
-   | Version               | Version of the master file                      |
-   |                       | Current value:8.0                               |
-   +-----------------------+-------------------------------------------------+
-   | Timestamp             | Timestamp of creation of master file            |
-   +-----------------------+-------------------------------------------------+
-   | Detector Type         | Detector type                                   |
-   +-----------------------+-------------------------------------------------+
-   | Timing Mode           | Timing Mode                                     |
-   +-----------------------+-------------------------------------------------+
-   | Geometry              | Number of UDP ports in x and y dimension for    |
-   |                       | complete detector                               |
-   +-----------------------+-------------------------------------------------+
-   | Image Size in bytes   | Image size in bytes per UDP port                |
-   +-----------------------+-------------------------------------------------+
-   | Pixels                | Number of pixels in x and y dimension           |
-   |                       | per UDP port                                    |
-   +-----------------------+-------------------------------------------------+
-   | Max Frames Per File   | Maximum frames per file                         |
-   +-----------------------+-------------------------------------------------+
-   | Frame Discard Policy  | Receiever Frame discard policy                  |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Frame Padding         | Receiver Frame padding enable                   |
-   |                       | for partial frames                              |
-   +-----------------------+-------------------------------------------------+
-   | Scan Parameters       | Scanning mode on detector                       |
-   +-----------------------+-------------------------------------------------+
-   | Total Frames          | Total number of frames and triggers expected    |
-   +-----------------------+-------------------------------------------------+
-   | Receiver Roi          | Receiver ROI in file including xmax and ymax    |
-   +-----------------------+-------------------------------------------------+
-   | Exptime               | Exposure time                                   |
-   +-----------------------+-------------------------------------------------+
-   | Period                | Period between frames                           |
-   +-----------------------+-------------------------------------------------+
-   | Ten Giga              | Ten giga enable                                 |
-   +-----------------------+-------------------------------------------------+
-   | ADC Mask              | Mask of channels enabled in ADC                 |
-   +-----------------------+-------------------------------------------------+
-   | Analog Flag           | Analog readout enable                           |
-   +-----------------------+-------------------------------------------------+
-   | Analog Samples        | Number of analog samples                        |
-   +-----------------------+-------------------------------------------------+
-   | Digital Flag          | Digital readout enable                          |
-   +-----------------------+-------------------------------------------------+
-   | Digital Samples       | Number of digital samples                       |
-   +-----------------------+-------------------------------------------------+
-   | Dbit Offset           | Digital offset of valid data in bytes           |
-   +-----------------------+-------------------------------------------------+
-   | Dbit Bitset           | Digital 64 bit mask of bits enabled in receiver |
-   +-----------------------+-------------------------------------------------+
-   | Transceiver Mask      | Mask of channels enabled in Transceiver         |
-   +-----------------------+-------------------------------------------------+
-   | Transceiver Flag      | Transceiver readout enable                      |
-   +-----------------------+-------------------------------------------------+
-   | Transceiver Samples   | Number of transceiver samples                   |
-   +-----------------------+-------------------------------------------------+
-   | Frames in File        | Number of frames written to file by Receiver 0  |
-   +-----------------------+-------------------------------------------------+
-   | Frame Header Format   | Expected frame header format for the data files |
-   +-----------------------+-------------------------------------------------+

docs/src/pyexamples.rst

@@ -10,46 +10,27 @@ open an issue in our our  `github repo
 Setting exposure time 
 ------------------------------------
 
-Setting and reading back exposure time can be done either using a Python 
-datetime.timedelta, DurationWrapper or by setting the time in seconds. 
+Setting and reading back exposure time can be done either using a Python datetime.timedelta
+or by setting the time in seconds. 
 
 ::
 
     # Set exposure time to 1.2 seconds
     >>> d.exptime = 1.2
-    >>> d.exptime = 5e-07
 
-    # Setting exposure time using timedelta (upto microseconds precision)
+    # Setting exposure time using timedelta
     import datetime as dt
     >>> d.exptime = dt.timedelta(seconds = 1.2)
-    >>> d.exptime = dt.timedelta(seconds = 1, microseconds = 3)
 
     # With timedelta any arbitrary combination of units can be used
     >>> t = dt.timedelta(microseconds = 100, seconds = 5.3, minutes = .3)
 
-    # using DurationWrapper to set in seconds
-    >>> from slsdet import DurationWrapper
-    >>> d.exptime = DurationWrapper(1.2)
-    
-    # using DurationWrapper to set in ns
-    >>> t = DurationWrapper()
-    >>> t.set_count(500)
-    >>> d.exptime = t
-
     # To set exposure time for individual detector one have to resort
     # to the C++ style API.
     # Sets exposure time to 1.2 seconds for module 0, 6 and 12
     >>> d.setExptime(1.2, [0, 6, 12]) 
     >>> d.setExptime(dt.timedelta(seconds = 1.2), [0, 6, 12]) 
 
-    # to get in seconds
-    >>> d.period
-    181.23
-
-    # to get in DurationWrapper
-    >>> d.getExptime()
-    [sls::DurationWrapper(total_seconds: 181.23 count: 181230000000)]
-
 
 
 ------------------------------------
@@ -239,7 +220,8 @@ Setting and getting times
     # This sets the exposure time for all modules
     d.exptime = 0.5
 
-    # exptime also accepts a python datetime.timedelta (upto microseconds resolution)
+    # exptime also accepts a python datetime.timedelta
+    # which can be used to set the time in almost any unit
     t = dt.timedelta(milliseconds = 2.3)
     d.exptime = t
 
@@ -247,25 +229,16 @@ Setting and getting times
     t = dt.timedelta(minutes = 3, seconds = 1.23)
     d.exptime = t
 
-    # using DurationWrapper to set in seconds
-    >>> from slsdet import DurationWrapper
-    >>> d.exptime = DurationWrapper(1.2)
-    
-    # using DurationWrapper to set in ns
-    >>> t = DurationWrapper()
-    >>> t.set_count(500)
-    >>> d.exptime = t
-
     # exptime however always returns the time in seconds
     >>> d.exptime
     181.23 
 
     # To get back the exposure time for each module 
     # it's possible to use getExptime, this also returns
-    # the values as  DurationWrapper
+    # the values as datetime.timedelta
 
     >>> d.getExptime()
-    [sls::DurationWrapper(total_seconds: 181.23 count: 181230000000)]
+    [datetime.timedelta(seconds=181, microseconds=230000), datetime.timedelta(seconds=181, microseconds=230000)]
 
     # In case the values are the same it's possible to use the
     # element_if_equal function to reduce the values to a single 
@@ -273,8 +246,7 @@ Setting and getting times
 
     >>> t = d.getExptime()
     >>> element_if_equal(t)
-    sls::DurationWrapper(total_seconds: 1.2 count: 1200000000)
-
+    datetime.timedelta(seconds=1)
 
 --------------
 Reading dacs

docs/src/pygettingstarted.rst

@@ -6,7 +6,7 @@ Getting Started
 Which Python?  
 --------------------
 
-We require at least Python 3.8 and strongly recommended that you don't use the system
+We require at lest Python 3.6 and strongly recommended that you don't use the system
 Python installation. The examples in this documentation uses `conda
 <https://docs.conda.io/en/latest/miniconda.html>`_ since it provides good support
 also for non Python packages but there are also other alternatives like, pyenv. 
@@ -14,35 +14,28 @@ also for non Python packages but there are also other alternatives like, pyenv.
 Using something like conda also allows you to quickly switch beteen different Python 
 environments. 
 
----------------------
-Building from Source 
----------------------
-
-If you are not installing slsdet binaries from conda, but instead building from 
-source, please refer to  :ref:`the installation section<Installation>` for details.
-
-Don't forget to compile with the option SLS_USE_PYTHON=ON to enable the Python 
-bindings or if you use the cmk.sh script -p.
-
-.. note ::
-
-    Ensure that the sls det python lib compiled is for the expected python version.
-    For example, build/bin/_slsdet.cpython-39-x86_64-linux-gnu.so for Python v3.9.x
+.. warning ::
 
+    If you use conda avoid also installing packages with pip. 
 
 ---------------------
 PYTHONPATH 
 ---------------------
 
-If you install slsdet binaries using conda everything is set up and you can
+If you install slsdet using conda everything is set up and you can
 directly start using the Python bindings. However, if you build 
-from source you need to tell Python where to find slsdet to use it. This
-can be done by adding your build/bin directory to PYTHONPATH. 
+from source you need to tell Python where to find slsdet. This
+is be done by adding your build/bin directory to PYTHONPATH. 
 
 .. code-block:: bash
 
     export PYTHONPATH = /path/to/your/build/bin:$PYTHONPATH
 
+.. note ::
+
+    Don't forget to compile with the option SLS_USE_PYTHON=ON to enable
+    the Python bindings or if you use the cmk.sh script -p.
+
 --------------------------------------
 Which detector class should I use? 
 --------------------------------------
@@ -153,11 +146,9 @@ their name.
 :: 
 
     >>> [item for item in dir(d) if 'time' in item]
-    ['compdisabletime', 'exptime', 'exptimel', 'frametime', 'getExptime', 
-    'getExptimeForAllGates', 'getExptimeLeft', 'getSubExptime', 'patwaittime', 
-    'patwaittime0', 'patwaittime1', 'patwaittime2', 'runtime', 'setExptime', 
-    'setSubExptime', 'subdeadtime', 'subexptime']
-
+    ['exptime', 'getExptime', 'getExptimeForAllGates', 'getExptimeLeft', 
+    'getSubExptime', 'patwaittime0', 'patwaittime1', 'patwaittime2', 
+    'setExptime', 'setSubExptime', 'subdeadtime', 'subexptime']
 
 The above method works on any Python object but for convenience we also 
 included two functions to find names. View prints the names one per line
@@ -169,7 +160,6 @@ while find returns a list of names.
 
     >>> view('exptime')
     exptime
-    exptimel
     getExptime
     getExptimeForAllGates
     getExptimeLeft
@@ -178,7 +168,6 @@ while find returns a list of names.
     setSubExptime
     subexptime
 
-
     >>> find('exptime')
     ['exptime', 'getExptime', 'getExptimeForAllGates', 'getExptimeLeft', 
     'getSubExptime', 'setExptime', 'setSubExptime', 'subexptime']
@@ -196,39 +185,19 @@ To access the documentation of a function directly from the Python prompt use he
     Help on property:
 
         Period between frames, accepts either a value in seconds or datetime.timedelta
-        
+
         Note
         -----
-        :getter: always returns in seconds. To get in DurationWrapper, use getPeriod
-        
-        Example
+        :getter: always returns in seconds. To get in datetime.delta, use getPeriod
+
+        Examples
         -----------
-        >>> # setting directly in seconds
         >>> d.period = 1.05
-        >>>
-        >>> # setting directly in seconds
-        >>> d.period = 5e-07
-        >>> 
-        >>> # using timedelta (up to microseconds precision)
-        >>> from datatime import timedelta
-        >>> d.period = timedelta(seconds = 1, microseconds = 3)
-        >>> 
-        >>> # using DurationWrapper to set in seconds
-        >>> from slsdet import DurationWrapper
-        >>> d.period = DurationWrapper(1.2)
-        >>> 
-        >>> # using DurationWrapper to set in ns
-        >>> t = DurationWrapper()
-        >>> t.set_count(500)
-        >>> d.period = t
-        >>>
-        >>> # to get in seconds
+        >>> d.period = datetime.timedelta(minutes = 3, seconds = 1.23)
         >>> d.period
         181.23
-        >>> 
-        >>> d.getExptime()
-        [sls::DurationWrapper(total_seconds: 181.23 count: 181230000000)]
-
+        >>> d.getPeriod()
+        [datetime.timedelta(seconds=181, microseconds=230000)]
 
 
 ----------------------
@@ -248,12 +217,11 @@ The enums can be found in slsdet.enums
 
     import slsdet
     >>> [e for e in dir(slsdet.enums) if not e.startswith('_')]
-    ['M3_GainCaps', 'burstMode', 'clockIndex', 'cls', 'dacIndex', 'detectorSettings', 
-    'detectorType', 'dimension', 'externalSignalFlag', 'fileFormat', 
-    'frameDiscardPolicy', 'gainMode', 'name', 'polarity', 'portPosition', 
-    'readoutMode', 'runStatus', 'speedLevel', 'streamingInterface', 'timingMode', 
-    'timingSourceType', 'vetoAlgorithm']
-
+    ['burstMode', 'clockIndex', 'dacIndex', 
+    'detectorSettings', 'detectorType', 'dimension', 'externalSignalFlag', 
+    'fileFormat', 'frameDiscardPolicy', 
+    'readoutMode', 'runStatus', 'speedLevel', 'timingMode', 
+    'timingSourceType']
 
     # Even though importing using * is not recommended one could
     # get all the enums like this: 

docs/src/quick_start_guide.rst

@@ -66,15 +66,11 @@ For a Single Module
         # sets destination udp ports (not needed, default is 50001)
         udp_dstport 50012
 
-        # 1g data out
         # source udp ips must be same subnet at destintaion udp ips
-        # udp_srcip 192.168.1.112
-        # destination udp ip picked up from rx_hostname (if auto)
-        # udp_dstip auto
+        udp_srcip 192.168.1.112
 
-        # 10g data out
-        udp_srcip 10.30.20.200
-        udp_dstip 10.30.20.6
+        # destination udp ip picked up from rx_hostname (if auto)
+        udp_dstip auto
 
         # set file path
         fpath /tmp
@@ -109,14 +105,12 @@ For Multiple Modules
         # connects to mulitple modules
         hostname bchipxxx+bchipyyy+
 
-        # tcp port increases for each module (multi detector command)
-        rx_tcpport 2012
-
         # connects to receivers at ports 2012 and 2014
-        rx_hostname mpc1922
+        rx_hostname mpc1922:2012+mpc1922:2013+
 
-        # increasing udp ports (multi detector command)
-        udp_dstport 50012
+        # sets differernt destination udp ports
+        0:udp_dstport 50012
+        1:udp_dstport 50014
 
         # source udp ips must be same subnet at destintaion udp ips
         0:udp_srcip 192.168.1.112
@@ -128,10 +122,6 @@ For Multiple Modules
         # set file path
         fpath /tmp
 
-.. note ::   
-    The **hostname** and **detsize** command in a multi module system can affect the row and column values in the udp/zmq header. The modules are stacked row by row until they reach the y-axis limit set by detsize (if specified). Then, stacking continues in the next column and so on. 
-
-    
 Gui
 ----
 

docs/src/receivers.rst

@@ -1,25 +1,58 @@
-Custom Receiver
+Receivers
 =================
 
-The receiver essentially listens to UDP data packets sent out by the detector.
+Receiver processes can be run on same or different machines as the client, receives the data from the detector (via UDP packets).
+When using the slsReceiver/ slsMultiReceiver, they can be further configured by the client control software (via TCP/IP) to set file name, file path, progress of acquisition etc.
 
-To know more about detector receiver setup in the config file, please check out :ref:`the detector-receiver UDP configuration in the config file<detector udp header config>` and the :ref:`detector udp format<detector udp header>`.
+Detector UDP Header
+---------------------
 
+| The UDP data format for the packets consist of a common header for all detectors, followed by the data for that one packet.
 
-| Please note the following when using a custom receiver:
+**The SLS Detector Header**
 
-* **udp_dstmac** must be configured in the config file. This parameter is not required when using an in-built receiver.
+.. table:: <-------------------------------- 8 bytes -------------------------------->
+    :align: center
+    :widths: 30,30,30,30
 
-* Cannot use "auto" for **udp_dstip**.
+    +--------------------------------------------------------------------+
+    |frameNumber                                                         |
+    +---------------------------------+----------------------------------+
+    |expLength                        |packetNumber                      |
+    +---------------------------------+----------------------------------+
+    |bunchId                                                             |
+    +--------------------------------------------------------------------+
+    |timestamp                                                           |
+    +----------------+----------------+----------------+-----------------+
+    |modId           |row             |column          |reserved         |
+    +----------------+----------------+----------------+--------+--------+
+    |debug                            |roundRNumber    |detType |version |
+    +---------------------------------+----------------+--------+--------+
 
-* No **rx_** commands in the config file. These commands are for configuring the slsReceiver.
+UDP configuration in Config file
+----------------------------------
 
+#. UDP source port is hardcoded in detector server, starting at 32410.
+#. **udp_dstport** : UDP destination port number. Port in receiver pc to listen to packets from the detector.
+#. **udp_dstip** : IP address of UDP destination interface. IP address of interface in receiver pc to listen to packets from detector. If **auto** is used (only when using slsReceiver/ slsMultiReceiver), the IP of **rx_hostname** is picked up.
+#. **udp_dstmac** : Mac address of UDP destination interface. MAC address of interface in receiver pc to list to packets from detector. Only required when using custom receiver, else slsReceiver/slsMultiReceiver picks it up from **udp_dstip**.
+#. **udp_srcip** : IP address of UDP source interface. IP address of detector UDP interface to send packets from. Do not use for Eiger 1Gb interface (uses its hardware IP). For others, must be in the same subnet as **udp_dstip**.
+#. **udp_srcmac** : MAC address of UDP source interface. MAC address of detector UDP interface to send packets from. Do not use for Eiger (uses hardware mac). For others, it is not necessary, but can help for switch and debugging to put unique values for each module.
+ 
 
+Custom Receiver
+----------------
 
-The main difference is the lack of **rx_** commands or file commands (eg. **f**write, **f**path) and the **udp_dstmac** is required in config file.
+| When using  custom receiver with our package, ensure that **udp_dstmac** is also configured in the config file. This parameter is not required when using slsReceiver.
+
+| Cannot use "auto" for **udp_dstip**.
+
+| Also ensure that there are no **rx_** commands in the config file. These commands are for configuring the slsReceiver.
 
 Example of a custom receiver config file
 
+* The main difference is the lack of **rx_** commands or file commands (eg. fwrite, fpath) and the udp_dstmac is required in config file.
+
 .. code-block:: bash
 
     # detector hostname

docs/src/result.rst

@@ -1,5 +1,3 @@
-.. _Result Class:
-
 Result
 ==============================================
 

docs/src/servers.rst

@@ -1,14 +1,5 @@
-Getting Started
-===============
-
-Detector Servers include:
-   * Control server [default port: 1952]
-      * Almost all client communication.
-   * Stop server [default port: 1953]
-      *  Client requests for detector status, stop acquisition, temperature, advanced read/write registers.
-
-When using a blocking acquire command (sls_detector_acquire or Detector::acquire), the control server is blocked until end of acquisition. However, stop server commands could be used in parallel.
-
+Detector Servers
+=================
 
 Location
 ---------
@@ -23,29 +14,36 @@ Arguments
    .. code-block:: bash  
 
       Possible arguments are:
-         -v, --version            : Software version
-         -p, --port <port>        : TCP communication port with client. 
-         -g, --nomodule           : [Mythen3][Gotthard2] 
-                                    Generic or No Module mode. Skips detector type checks. 
-         -f, --phaseshift <value> : [Gotthard] only. Sets phase shift. 
-         -d, --devel              : Developer mode. Skips firmware checks. 
-         -u, --update             : Update mode. Skips firmware checks and initial detector setup. 
-         -i, --ignore-config      : [Eiger][Jungfrau][Gotthard][Gotthard2][Moench] 
-                                    Ignore config file. 
-         -m, --master <master>    : [Eiger][Mythen3][Gotthard][Gotthard2] 
-                                    Set Master to 0 or 1. Precedence over config file. Only for virtual servers except Eiger. 
-         -t, --top <top>          : [Eiger] Set Top to 0 or 1. Precedence over config file. 
-         -s, --stopserver         : Stop server. Do not use as it is created by control server 
+      -v, --version            : Software version
+      -p, --port <port>        : TCP communication port with client. 
+      -g, --nomodule           : [Mythen3][Gotthard2] Generic or No Module mode. 
+                                 Skips detector type checks.
+      -f, --phaseshift <value> : [Gotthard] only. Sets phase shift. 
+      -d, --devel              : Developer mode. Skips firmware checks. 
+      -u, --update             : Update mode. Skips firmware checks and initial detector setup. 
+      -s, --stopserver         : Stop server. Do not use as it is created by control server 
+
+
+Basics
+------------
+
+Detector Servers include:
+   * Control server [default port: 1952]
+      * Almost all client communication.
+   * Stop server [default port: 1953]
+      *  Client requests for detector status, stop acquisition, temperature, advanced read/write registers.
+
+When using a blocking acquire command (sls_detector_acquire or Detector::acquire), the control server is blocked until end of acquisition. However, stop server commands could be used in parallel.
 
 
 .. _Automatic start servers:
-
 Automatic start 
 ------------------
 
 One can start the on-board detector server automatically upon powering on the board.
 
-#. Create a soft link to the binary on board:
+#. Create a soft link to the binary on board 
+   :
       .. code-block:: bash
       
          ln -sf someDetectorServervx.x.x someDetectorServer
@@ -87,12 +85,11 @@ One can start the on-board detector server automatically upon powering on the bo
          /root/xxxDetectorServer >> /dev/null &
 
 
-#. Sync, reboot and verify:
+#. Sync, reboot and verify
+   :
       .. code-block:: bash
       
          sync
-
-         # physically reboot for Gotthard II or Mythen III
          reboot
 
          # verify

docs/src/serverupgrade.rst

@@ -1,7 +1,6 @@
 .. _Detector Server Upgrade:
-
-Upgrade
-========
+Detector Server Upgrade
+=======================
 
 
 **Location:** slsDetectorPackage/serverBin/ folder for every release.
@@ -15,7 +14,7 @@ Upgrade
     Eiger requires a manual reboot. Or killall the servers and restart the new linked one. If you are in the process of updating firmware, then don't reboot yet.
 
 
-6.1.1+ (no tftp required)
+From 6.1.1 and above (no tftp required)
 ---------------------------------------
 
 #. Program from console
@@ -61,7 +60,7 @@ Troubleshooting with tftp
 #. text file busy: You are trying to copy the same server.
 
 
-< 5.0.0
---------
+Older than 5.0.0
+-----------------
 
 Please contact us.

docs/src/slsreceiver.rst

@@ -1,55 +1,16 @@
-In-built Receiver   
+slsReceiver/ slsMultiReceiver
 ================================
 
+| One has to start the slsReceiver before loading config file or using any receiver commands (prefix: **rx_** )
 
-
-The receiver essentially listens to UDP data packets sent out by the detector. It's main features are:
-
-- **Listening**: Receives UDP data from the detector.
-- **Writing to File**: Optionally writes received data to disk.
-- **Streaming via ZMQ**: Optionally streams out the data using ZeroMQ.
-
-Each of these operations runs asynchronously and in parallel for each UDP port.
-
-
-.. note ::   
-
-    * Can be run on the same or different machine as the client.
-    * Can be configured by the client. (set file name/ discard policy, get progress etc.)
-    * Has to be started before the client runs any receiver specific command.
-
-
-Receiver Variants
------------------
-There are three main receiver types. How to start them is described :ref:`below<Starting up the Receiver>`.
-
-+----------------------+--------------------+-----------------------------------------+--------------------------------+
-| Receiver Type        | slsReceiver        | slsMultiReceiver                        |slsFrameSynchronizer            | 
-+======================+====================+=========================================+================================+
-| Modules Supported    | 1                  | Multiple                                | Multiple                       |
-+----------------------+--------------------+-----------------------------------------+--------------------------------+
-| Internal Architecture| Threads per porttt | Multiple child processes of slsReceiver | Multi-threading of slsReceiver |
-+----------------------+--------------------+-----------------------------------------+--------------------------------+
-| ZMQ Streaming        | Disabled by default| Disabled by default                     | Enabled, not optional          |
-+----------------------+--------------------+-----------------------------------------+--------------------------------+
-| ZMQ Synchronization  | No                 | No                                      | Yes, across ports              |
-+----------------------+--------------------+-----------------------------------------+--------------------------------+
-| Image Reconstruction | No                 | No                                      | No                             |
-+----------------------+--------------------+-----------------------------------------+--------------------------------+
-
-
-
-
-.. _Starting up the Receiver:
-
-Starting up the Receiver
--------------------------
 For a Single Module
     .. code-block:: bash  
-        
-        slsReceiver # default port 1954
 
-        slsReceiver -t2012 # custom port 2012
+        # default port 1954
+        slsReceiver
+
+        # custom port 2012
+        slsReceiver -t2012
 
 
 For Multiple Modules
@@ -57,66 +18,52 @@ For Multiple Modules
 
         # each receiver (for each module) requires a unique tcp port (if all on same machine)
 
-        # option 1 (one for each module)
+        # using slsReceiver in multiple consoles
         slsReceiver
         slsReceiver -t1955
 
-        # option 2
+        # slsMultiReceiver [starting port] [number of receivers]
         slsMultiReceiver 2012 2
 
-        # option 3
-        slsFrameSynchronizer 2012 2
-
+        # slsMultiReceiver [starting port] [number of receivers] [print each frame header for debugging]
+        slsMultiReceiver 2012 2 1
 
 
 Client Commands 
 -----------------
 
-* Client commands to the receiver begin with **rx_** or **f_** (file commands).
+| One can remove **udp_dstmac** from the config file, as the slsReceiver fetches this from the **udp_ip**.
 
-* **rx_hostname** has to be the first command to the receiver so the client knows which receiver process to communicate with.
+| One can use "auto" for **udp_dstip** if one wants to use default ip of **rx_hostname**.
 
-* Can use 'auto' for **udp_dstip** if using 1GbE interface or the :ref:`virtual simulators<Virtual Detector Servers>`.
-
-
-To know more about detector receiver setup in the config file, please check out :ref:`the detector-receiver UDP configuration in the config file<detector udp header config>` and the :ref:`detector udp format<detector udp header>`.
-
-
-The following are the different ways to establish contact using **rx_hostname** command.
+| The first command to the receiver (**rx_** commands) should be **rx_hostname**. The following are the different ways to establish contact.
 
     .. code-block:: bash  
 
-        # ---single module---
-
-        # default receiver port at 1954
+        # default receiver tcp port (1954)
         rx_hostname xxx
-       
+
         # custom receiver port
-        rx_hostname xxx:1957 # option 1
-       
-        rx_tcpport 1957  # option 2
+        rx_hostname xxx:1957
+
+        # custom receiver port
+        rx_tcpport 1954
         rx_hostname xxx
 
+        # multi modules with custom ports
+        rx_hostname xxx:1955+xxx:1956+
 
-        # ---multi module---
-
-        # using increasing tcp ports
-        rx_tcpport 1955
-        rx_hostname xxx
-
-        # custom ports
-        rx_hostname xxx:1955+xxx:1958+ # option 1
-
-        0:rx_tcpport 1954 # option 2
+        # multi modules with custom ports on same rxr pc
+        0:rx_tcpport 1954
         1:rx_tcpport 1955
         2:rx_tcpport 1956
         rx_hostname xxx
 
-        # custom ports on different receiver machines
+        # multi modules with custom ports on different rxr pc
         0:rx_tcpport 1954
         0:rx_hostname xxx
         1:rx_tcpport 1955
-        1:rx_hostname yyyrxr
+        1:rx_hostname yyy
 
 
 | Example commands:
@@ -139,32 +86,60 @@ The following are the different ways to establish contact using **rx_hostname**
         sls_detector_get -h rx_framescaught
 
 
-Example of a config file using in-built receiver
+File format
+--------------
 
-.. code-block:: bash
+* The file name format is [fpath]/[fname]_dx_fy_[findex].raw, where x is module index and y is file index. **fname** is file name prefix and by default "run". **fpath** is '/' by default.
 
-    # detector hostname
-    hostname bchip052+bchip053+
+* Each acquisition will have an increasing acquisition index or findex (if file write enabled). This can be retrieved by using **findex** command. 
 
-    # udp destination port (receiver)
-    # sets increasing destination udp ports starting at 50004
-    udp_dstport 50004
+* Each acquisition can have multiple files (the file index number **y**), with **rx_framesperfile** being the maximum number of frames per file. The default varies for each detector type.
 
-    # udp destination ip (receiver)
-    0:udp_dstip 10.0.1.100
-    1:udp_dstip 10.0.2.100
+* Some file name examples:
 
-    # udp source ip (same subnet as udp_dstip)
-    0:udp_srcip 10.0.1.184
-    1:udp_srcip 10.0.2.184
+    .. code-block:: bash
 
-    # udp destination mac - not required (picked up from udp_dstip)
-    #udp_dstmac 22:47:d5:48:ad:ef
+        # first file
+        path-to-file/run_d0_f0_0.raw
 
-    # connects to receivers at increasing tcp port starting at 1954
-    rx_hostname mpc3434
-    # same as rx_hostname mpc3434:1954+mpc3434:1955+
+        # second file after reaching max frames in first file
+        path-to-file/run_d0_f1_0.raw
+        
+        # second acquisition, first file
+        path-to-file/run_d0_f0_1.raw
 
+* Each acquisition will create a master file that can be enabled/disabled using **fmaster**. This should have parameters relevant to the acquisition.
+
+* SLS Receiver Header consist of SLS Detector Header + 64 bytes of bitmask, altogether 112 bytes. The packetNumber in the sls detector header part, will be updated to number of packets caught by receiver for that frame. Furthermore, the bit mask will specify which packets have been received.
+
+**Binary file format**
+
+* This is the default file format. 
+
+* Each data file will consist of frames, each consisting of slsReceiver Header followed by data for 1 frame.
+
+* Master file is of ASCII format and will also include the format of the slsReceiver Header.
+
+
+**HDF5 file formats**
+
+#. Compile the package with HDF5 option enabled
+
+    #. Using cmk script: ./cmk.sh -hj9 -d [path of hdf5 dir]
+
+    #. Enable using cmake **-DCMAKE_INSTALL_PREFIX=/path/to/hdf/installation** and **-DSLS_USE_HDF5=ON**
+
+#. Start Receiver process
+
+#. Load config file
+
+#. Set file format from client or in config file
+    .. code-block:: bash
+
+        sls_detector_put fformat hdf5
+
+
+| For multiple, modules, a virtual file linking all the modules is created. Both the data files and virtual files are linked in the master file.
 
 
 Performance 
@@ -185,7 +160,7 @@ When handling callbacks, the control should be returned as soon as possible, to
 **Example**
     * `main cpp file <https://github.com/slsdetectorgroup/api-examples/blob/master/e4-receiver_callbacks.cpp>`_ 
     * `cmake file <https://github.com/slsdetectorgroup/api-examples/blob/master/CMakeLists.txt>`_. 
-    * how to install the slsDetectorPackage with cmake is provided :ref:`here <build from source using cmake>`.
+    * how to install the slsDetectorPackage is provided :ref:`here <build from source using cmake>`.
     * compile the example **e4-rxr** by:
 
         .. code-block:: bash

docs/src/slsreceiverheaderformat.rst

@@ -1,40 +0,0 @@
-
-.. _sls receiver header format:
-
-SLS Receiver Header Format
-====================================================
-
-It is 112 bytes and consists of:
-    * 48 bytes of the SLS Detector Header 
-    * 64 bytes of packet mask
-
-.. code-block:: cpp 
-    
-    typedef struct {
-        uint64_t frameNumber;
-        uint32_t expLength;
-        uint32_t packetNumber;
-        uint64_t detSpec1;
-        uint64_t timestamp;
-        uint16_t modId;
-        uint16_t row;
-        uint16_t column;
-        uint16_t detSpec2;
-        uint32_t detSpec3;
-        uint16_t detSpec4;
-        uint8_t detType;
-        uint8_t version;
-    } sls_detector_header;
-
-    struct sls_receiver_header {
-        sls_detector_header detHeader; /**< is the detector header */
-        sls_bitset packetsMask;        /**< is the packets caught bit mask */
-    };
-
-
-
-| **sls_detector_header** (described in :ref:`the current detector header <detector udp header>`)
-    
-| The **packetNumber** from detector UDP header is modified in **sls_receiver_header** to number of packets caught by receiver for that frame and the bit mask for each packet caught is the **packetsMask**. The packetsMask is a total of 512 bits due to the largest number of packets per frame among our detectors.
-
-| For eg. Jungfrau has 128 packets per frame. If **packetNumeber** is 128, then this frame is complete. If it is 127 or less, it is a partial frame due to missing packets. If one would still like to use it, the **packetsMask** will specify which packet has been received or is missing.

docs/src/troubleshooting.rst

@@ -8,26 +8,21 @@ open an issue at our  `github repo issues
 Common
 ------
 
+Missing Packets
+^^^^^^^^^^^^^^^
+Possible causes could be the following:
 
-1. Total Failure of Packet Delivery
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#. Receiver PC is not tuned for socket buffer size and input packet queue.
+    * Refer to :ref:`Increase rmem_default, rmem_max and max_backlog<Receiver PC Tuning>`
 
-#. Data cable plugged into the wrong interface on board (Jungfrau)
-    * Please ensure that the data cable is plugged into the rightmost interface (default for single interface). The inner one is disabled for PCB v1.0 and must be selected via command for PCB v2.0.
+#. Wiring
+    * Faulty wiring or connecting cable to incorrect interface.
 
 #. Link up and speed
-    * Check ethtool and find if Link Deteced:Yes and Speed is acceptable (>10k).
-    * Check to see if the 10G link is up (blue or red LED on board, close to SFP+). If not:
-
-       * Check transeiver and fibers are compatible (all MMF 850nm or all SMF 1030nm)
-       * Check fiber
-       * Check fiber polarity (if short range, unplug the link anywhere, and look at the light/dark pattern: dark has to mate with light)
-    * For Jungfrau, check if the blue sfp light is blinking rapidly (even when it is not sending data). If so, most likely the link is down and something is wrong with the board. If it connected to a switch, then you do not see it with the ethtool command if link is down. One option is to connect it directly to a pc to see if link is down.
-    * With nc, try "nc -u -p 50001 -l" in receiving pc, and from another pc try "echo hallo | nc -u 10.1.2.172 50001" to send something to the recieving pc interface to see if the link is up and see if the other nc console receives the hallo.
+    * Check to see if there is a blue LED on board to signal that the link is up. Check ethtool and find if Link Deteced:Yes and Speed is acceptable (>10k).
 
 #. Detector is not acquiring (Not Eiger)
     * Take an acquisition with many images and using the following steps instead of acquire:
-
         .. code-block:: bash
 
             sls_detector_put status start
@@ -35,88 +30,44 @@ Common
             # which means the detector is acquiring.
             sls_detector_get framesl 
 
-            # If you are using multiple modules, the previous command can return -1 because each module will return different values. Then, check for a single module instead: sls_detector_get 0:framesl
+    .. note ::
+    
+        If you are using multiple modules, the previous command can return -1 because each module will return different values. Then, check for a single module instead: sls_detector_get 0:framesl
 
+#. Data cable plugged into the wrong interface on board (Jungfrau)
+    * Please ensure that the data cable is plugged into the rightmost interface. The middle one is disabled for PCB v1.0 and must be selected via command for PCB v2.0.
 
-#. Detector is not sending data (Except Eiger)
-    * Check the board to see if the green LED close to SFP is blinking (detector is sending data). If not, detector is not operated properly (period too short/long, no trigger in trigger mode) or misconfigured and needs reboot.
+#. Detector is not sending data
+    * Check the board to see if the green LED is blinking next to the data cable, which means that the detector is sending data.
 
-#. Power supply
-    * Check if power supply has enough current. 
-    * For Jungfrau, refer to :ref:`Jungfrau Power Supply Troubleshooting<Jungfrau Troubleshooting Power Supply>`.
+#. Firewall or security feature
+    * A firewall or some security feature could be blocking the reception of data.
+
+#. Ethernet interface not configured properly
+    * Ensure that the interfaces used are configured properly with the right mask and ip. Eg. use ifconfig and route commands to verify.
 
 #. Ethernet interface not configured for Jumbo frames (10Gb)
-    * Ensure that the interfaces (on NIC and the switch) used in receiver pc have MTU 9000 (jumbo frames) enabled.
+    * Ensure that the interfaces used in receiver pc have MTU 9000 (jumbo frames) enabled.
 
+#. Detector IP (Not Eiger)
+    * Ensure it is valid and does not end if 0 or 255. Also ensure that the detector ip is in the same subnet as rx_udpip and the masking in the interface configuration ensures this rule.
 
-#. Check if 'rx packets' counter in 'ifconfig' do not increment for interface.
-    * If no, check switch configuration if present. Port counters of switch can also help to identify problem.
-    * If yes, but receiver software does not see it:
-
-        * Check no firewall (eg. firewalld) is present or add rules
-
-                .. code-block:: bash
-                    
-                    # Stop and disable firewall
-                    service firewalld stop
-                    systemctl disable firewalld
-                    # Check status
-                    service firewalld status
-
-        * Check that selinux is disabled ( or add rules)
-        
-#. Source UDP IP in config file (Not Eiger)
-    * Ensure it is valid and does not end if 0 or 255. Also ensure that the source ip 'udp_srcip' is in the same subnet as destination ip 'udp_dstip' and the masking in the interface configuration ensures this rule.
-    * Eg. If interface IP is 102.10.10.110 and mask is 255.255.255.0, udp_srcip has to be 102.10.10.xxx (same subnet)
-    * Use ifconfig and route commands to verify etheret interface configuration
-
-
-#. Netstat and netcat
-    * Try with netstat to see if its really listening to the right interface. Or netcat to see if you get packets.
-
-#. Wireshark or Tcpdump
+#. Tcpdump or wireshark
     * Use one of these to confirm that you receive packets (with the right filtering ie. source and destination ports, ip).
 
-
-
-2. Partial or Random Packet Loss (Performance)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. note ::
-    
-    The following suggestions are for convenience. Please do not follow blindly, research each parameter and adapt it to your system.
-
-#. Receiver PC is not tuned for socket buffer size and input packet queue or other parameters.
-    * Refer to :ref:`Receiver PC Tuning<Receiver PC Tuning>`
-
-#. Wiring
-    * Faulty wiring or connecting cable to incorrect interface.
-
+#. Check SFP modules
+    * Check if the SFP modules on both sides of the fiber are of same type.
 
 #. Pinging the subnet (receiving only a few number of packets each time)
     * If a switch is used between a receiver pc and detector instead of plugging the cables directly, one might have to ping any ip in the subnet of the Ethernet interface constantly so that it does not forget the ip during operation.
     * Eg. if rx_udpip is 10.2.3.100, then ping constantly 10.2.3.xxx, where xxx is any ip other than 100.
-    * Using slsReceiver, you can use a command that does this for you:
-        .. code-block:: bash
-        
-            # arping the interface in a separate thread every minute
-            sls_detector_put rx_arping 1
 
 
-#. Only the slaves get no data 
-    * Check trigger cabling and trigger configuration
-    * When you cannot stop Jungfrau slaves in sync mode, refer to :ref:`Cannot stop slaves<Jungfrau Troubleshooting Sync Slaves Cannot Stop>`.
 
 .. _Receiver PC Tuning:
 
 Receiver PC Tuning Options
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. note ::
-
-    | xth1 is example interface name in the following examples. 
-    | These settings are lost at pc reboot.
-
 #. Increase maximum receive socket buffer size and socket input packet queue. 
     * Temporarily (until shut down)
         .. code-block:: bash
@@ -160,7 +111,6 @@ Receiver PC Tuning Options
         # check how many GB memory you can allocate, to avoid swapping otherwise    
 
 
-
 #. Modify ethtool settings. 
     * rx ring parameters
         .. code-block:: bash
@@ -177,9 +127,6 @@ Receiver PC Tuning Options
             # check 
             ethtool -c xth1
 
-            # enable adaptive xoalescence parameters
-            ethtool -C xth1 adaptive-rx on
-
             # set to max value in your pc settings
             ethtool -C xth1 rx-usecs 100 
 
@@ -191,43 +138,11 @@ Receiver PC Tuning Options
 
             # set to max value in your pc settings
             ethtool -A xth1 rx on
-    
-    * generic receiver offload (might not always work)
-        .. code-block:: bash
+ 
+    .. note ::
 
-            # check
-            ethtool -k xth1
-
-            # enable generic receiver offload
-            ethtool -K xth1 gro
-        
-
-#. Disable power saving in CPU frequency scaling and set system to performance 
-    * Check current policy (default might be powersave or schedutil)
-        .. code-block:: bash
-            
-            # check current active governor and range of cpu freq policy
-            cpupower frequency-info --policy
-            # list all available governors for this kernel
-            cpupower frequency-info --governors  
-
-    * Temporarily (until shut down)
-        .. code-block:: bash
-            
-            # set to performance
-            sudo cpupower frequency-set -g performance
-
-            # or
-            cpufreq-info
-            for i in ‘seq 0 7‘; do cpufreq-set -c $i -g performance; done
-            
-    * Permanently
-        .. code-block:: bash
-            
-            # edit /etc/sysconfig/cpupower to preference
-
-            # enable or disable permanently
-            sudo systemctl enable cpupower
+        | xth1 is example interface name. 
+        | These settings are lost at pc reboot.
 
 #. Give user speicific user scheduling privileges.
     .. code-block:: bash
@@ -240,29 +155,18 @@ Receiver PC Tuning Options
 
         This is also set if slsReceiver is run as root user.
         
-#. Some more advanced options: 
-    .. warning ::
         
-        Please do not try if you do not understand
+#. Disable power saving in CPU frequency 
+    .. code-block:: bash
 
-    #. reduce the number of queue per NIC to the number of expected streams: ethtool -L xth0 combined 2 
-    #. assign each queue to its stream:  ethtool -U xth0 flow-type tcp4 dst-port 50004 action 1
-    #. assign to each queue (IRQ) one CPU on the right socket:  echo "3"> /proc/irq/47/smp_affinity_list    #change the numbers looking at /proc/interrupts
-    #. disable irqbalance service 
-    #. Be sure that the switch knows the receiver mac address. Most switches reset the mac lists every few minutes, and since the receiver only receives, there is not a periodic refresh of the mac list. In this case, one can set a fixed mac list in the switch, or setup some kind of script arping or pinging out from that interface (will be available in 7.0.0). 
-    #. assign the receiver numa node (also with -m) to the socket where the NIC is attached. To know it, cat /sys/class/net/ethxxx/device/numa_node
-    #. ensure file system performance can handle sustained high data rate:
-        
-        * One can use dd: 
+        # or similar command depending on your distribution
+        cpupower frequency-info
+        cpupower frequency-set -g performance
 
-            .. code-block:: bash
-	            
-                dd if=/dev/zero of=/testpath/testfile bs=1M count=100000
-        * Or better fio (which needs to be installed) 
+        # or
+        cpufreq-info
+        for i in ‘seq 0 7‘; do cpufreq-set -c $i -g performance; done
 
-            .. code-block:: bash
-	        
-                fio --name=global –directory=/testpath/ --rw=write --ioengine=libaio --direct=0 --size=200G -- 	numjobs=2 --iodepth=1 --bs=1M –name=job
 
 slsReceiver Tuning
 ^^^^^^^^^^^^^^^^^^
@@ -270,25 +174,18 @@ slsReceiver Tuning
 #. Starting receiver as root to have scheduling privileges.
 
 #. For 10g, enable flow control
-
     .. code-block:: bash
 
         sls_detector_put flowcontrol10g 1
 
-#. Increase slsReceiver ring buffer depth 
-    This can be tuned depending on the number of receivers (modules) and memory available.
-
+#. Increase slsReceiver fifo depth between listening and processing threads.
     .. code-block:: bash
 
-        # sugggested not to use more than half memory of CPU socket in case of NUMA systems) for this
-
         sls_detector_get rx_fifodepth
-        # sets number of frames in fifo to 1024 ~1GB per receiver. Default is 2500
-        sls_detector_put rx_fifodepth 1024
-
-#. Increase number of frames per file 
-    This can reduce time taken to open and close files.
+        # sets number of frames in fifo to 5000
+        sls_detector_put rx_fifodepth 5000
 
+#. Increase number of frames per file to reduce time taken to open and close files.
     .. code-block:: bash
 
         sls_detector_get rx_framesperfile
@@ -296,31 +193,10 @@ slsReceiver Tuning
         # writes all frames into a single file
         sls_detector_put rx_framesperfile 0
 
-#. Disable file write
-    This can ensure it is not the file system performance hampering high date rate.
-
-    .. code-block:: bash
-
-        sls_detector_put fwrite 0
-
 
 Shared memory error
 ^^^^^^^^^^^^^^^^^^^
-For errors due to access or size, use any of the following suggestions.
-    #. Delete shared memory files and try again
-    #. Use environment variable to use a different shared memory ending in jfxx
-        
-        .. code-block:: bash
-
-            # shared memory ending in jfxx
-            export SLSDETNAME=jfxx
-
-    #. USe a different multi shared memory ID
-        .. code-block:: bash
-    
-            sls_detector_put 2-config xxxx.config
-            # or
-            sls_detector_put 2-hostname bchipxxx
+| For errors due to access or size, delete shared memory files nd try again.
 
 To list all shared memory files of sls detector package.
     .. code-block:: bash
@@ -394,14 +270,6 @@ Missing first frame or next frame after a delay
 Connect the data link from the Module directly to receiver pc or to a private network.
 
 
-Mythen3
---------
-
-Detector status is waiting even in auto timing mode
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Check if the control board or the flat band cable is connected properly. If not, connect them properly and try again.
-
-
 Jungfrau
 ---------
 
@@ -439,24 +307,6 @@ Cannot get multi module data
 
 #. Check :ref:`Common Multi Module Troubleshooting<common troubleshooting multi module data>`
 #. Power Supply
-    * Jungfrau needs a ~4A per module for a short time at startup. If not, it reboots misconfigured.
     * Comment out this line in the config file: powerchip 1
     * Powering on the chip increases the power consumption by a considerable amount. If commenting out this line aids in getting data (strange data due to powered off chip), then it could be the power supply current limit. Fix it (possibly to 8A current limit) and uncomment the powerchip line back in config file.
 
-
-
-.. _Jungfrau Troubleshooting Sync Slaves Cannot Stop:
-
-Cannot stop slaves in sync mode
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-#. If cabling is accessible, ensure termination board and flatband cable between the masters and the slaves are connnected properly. Then try to stop.
-#. If cabling is inaccessible, unsync first so that the slaves can get the stop directly from the client using the command. Then, don't use sync mode until the cabling is fixed.
-
-    .. code-block:: bash
-        
-        # unsync, slaves command will fail as it is still in waiting state
-        sls_detector_put sync 0
-
-        # stop should now be successful as master does not determine the stop anymore
-        sls_detector_put stop

docs/src/udpconfig.rst

@@ -1,37 +0,0 @@
-.. _detector udp header config:
-
-
-Config file
-============
-
-Commands to configure the UDP in the config file:
-
-.. note :: 
-
-    These command are recommended to be placed before "rx_hostname" if it is used.
-
-Source Port
------------
-    Hardcoded in detector server, starting at 32410.
-
-udp_srcip - Source IP
----------------------
-    IP address of detector UDP interface to send packets from. Do not use for Eiger 1Gb interface (uses its hardware IP). For others, must be in the same subnet as **udp_dstip**.
-
-udp_srcmac - Source MAC
------------------------
-    MAC address of detector UDP interface to send packets from. Do not use for Eiger (uses hardware mac). For others, it is not necessary, but can help for switch and debugging to put unique values for each module.
- 
-
-udp_dstport - Desintation Port
--------------------------------
-    Port in receiver pc to listen to packets from the detector.
-
-udp_dstip - Destination IP
---------------------------
-    IP address of interface in receiver pc to listen to packets from detector. If **auto** is used (only when using slsReceiver/ slsMultiReceiver), the IP of **rx_hostname** is picked up.
-
-udp_dstmac - Destination MAC
-----------------------------
-    MAC address of interface in receiver pc to list to packets from detector. Only required when using custom receiver, else slsReceiver/slsMultiReceiver picks it up from **udp_dstip**.
-

docs/src/udpdetspec.rst

@@ -1,152 +0,0 @@
-.. _detector specific fields:
-
-Detector Specific Fields
-========================
-
-Please check out :ref:`the current detector header <detector udp header>` to see 
-where the detector specific fields are placed.
-
-
-
-Eiger
-------
-
-.. table:: Detector Specific Field
-   
-   +----------+------------------------------+
-   | expLength| Sub Frame Number             |
-   +----------+------------------------------+
-   | detSpec1 | 0x0                          |
-   +----------+------------------------------+
-   | detSpec2 | 0x0                          |
-   +----------+------------------------------+
-   | detSpec3 | e14a                         |
-   +----------+------------------------------+
-   | detSpec4 | Round Robin Interface Number |
-   +----------+------------------------------+
-
-
-Jungfrau
----------
-
-.. table:: Detector Specific Field
-
-   +----------+------------------------------+
-   | detSpec1 | Bunch Id [#]_                |
-   +----------+------------------------------+
-   | detSpec2 | 0                            |
-   +----------+------------------------------+
-   | detSpec3 | DAQ info                     |
-   +----------+------------------------------+
-   | detSpec4 | 0                            |
-   +----------+------------------------------+
-
-
-.. table:: DAQ Info Field
-
-   +----------+--------------------+----------------------------------------------+
-   |   Bits   |       Name         |   Description                                |
-   +----------+--------------------+-----+----------------------------------------+
-   | 0        | High gain          |  1  | High Gain enabled                      |
-   |          |                    +-----+----------------------------------------+
-   |          |                    |  0  | High Gain disabled                     |
-   +----------+--------------------+-----+----------------------------------------+
-   | 1        | Fix gain stage 1   |  1  | Gain stage 1 fixed. The switch that    |
-   |          |                    |     | selects the gains stage 1 is active all|
-   |          |                    |     | the time.                              |
-   |          |                    +-----+----------------------------------------+
-   |          |                    |  0  | Gain stage 1 unset. The switch that    |
-   |          |                    |     | selects the gains stage 1 is inactive  |
-   |          |                    |     | all the time.                          |
-   +----------+--------------------+-----+----------------------------------------+
-   | 2        | Fix gain stage 2   |  1  | Gain stage 2 fixed. The switch that    |
-   |          |                    |     | selects the gains stage 2 is active all|
-   |          |                    |     | the time.                              |
-   |          |                    +-----+----------------------------------------+
-   |          |                    |  0  | Gain stage 2 unset. The switch that    |
-   |          |                    |     | selects the gains stage 2 is inactive  |
-   |          |                    |     | all the time.                          |
-   +----------+--------------------+-----+----------------------------------------+
-   | 4        | Comparator reset   |  1  | On-chip comparator in reset state.     | 
-   |          |                    |     | Dynamic-gain switching is therefore    |
-   |          |                    |     | disabled.                              |
-   |          |                    +-----+----------------------------------------+
-   |          |                    |  0  | On-chip comparator active.             |
-   +----------+--------------------+-----+-----+-----+----------------------------+
-   | 7-5      | Jungfrau chip      |Bit 7|Bit 6|Bit 5| Description                |
-   |          | version            +-----+-----+-----+----------------------------+
-   |          |                    | 0   |   0 |  0  | v1.0                       |
-   |          |                    +-----+-----+-----+----------------------------+
-   |          |                    | 0   |   0 |  1  | v1.1                       |
-   |          |                    +-----+-----+-----+----------------------------+
-   |          |                    | 0   |   1 |  X  | Reserved                   |
-   |          |                    +-----+-----+-----+----------------------------+
-   |          |                    | 1   |   X |  X  | Reserved                   |
-   +----------+--------------------+-----+-----+-----+----------------------------+
-   | 11-8     | Storage cell select|Storage cell used for this exposure. This     |
-   |          |                    |field defines the storage cell that was used  |
-   |          |                    |to acquire the data of this frame             |
-   +----------+--------------------+-----+----------------------------------------+
-   | 12       | Force switching    |  1  | Forced switching to gain stage 1 at the|
-   |          | to gain stage 1    |     | start of the exposure period.          |
-   |          |                    +-----+----------------------------------------+
-   |          |                    |  0  | Disabled forced gain switching to gain |
-   |          |                    |     | stage 1. Dynamic gain switching        |
-   |          |                    |     | conditions apply.                      |
-   +----------+--------------------+-----+----------------------------------------+
-   | 13       | Force switching    |  1  | Forced switching to gain stage 2 at the|
-   |          | to gain stage 2    |     | start of the exposure period.          |
-   |          |                    +-----+----------------------------------------+
-   |          |                    | 0   | Disabled forced gain switching to gain |
-   |          |                    |     | stage 2. Dynamic gain switching        |
-   |          |                    |     | conditions apply.                      |
-   +----------+--------------------+-----+-----+-----+----------------------------+
-   | 23-16    |  10-Gigabit event  |The 8-bit event code contains value of the    |
-   |          |  code              |event received over the 10 GbE interface by   |
-   |          |                    |JUNGFRAU detector at the moment of the frame  |
-   |          |                    |acquisition.                                  |
-   +----------+--------------------+-----+----------------------------------------+
-   | 31       | External input flag|  1  | External input flag detected in the    |
-   |          |                    |     | last exposure.                         |
-   |          |                    +-----+----------------------------------------+
-   |          |                    |  0  | External input flag not detected in the|
-   |          |                    |     | last exposure.                         |
-   +----------+--------------------+-----+----------------------------------------+
-
-
-
-Gotthard2
-----------
-
-.. table:: Detector Specific Field
-
-   +----------+------------------------------+
-   | detSpec1 | Train Id [#]_                |
-   +----------+------------------------------+
-   | detSpec2 | Bunch Id [#]_                |
-   +----------+------------------------------+
-   | detSpec3 | 0                            |
-   +----------+------------------------------+
-   | detSpec4 | 0                            |
-   +----------+------------------------------+
-
-
-Mythen3
-----------
-
-.. table:: Detector Specific Field
-
-   +----------+------------------------------+
-   | detSpec1 | 0                            |
-   +----------+------------------------------+
-   | detSpec2 | 0                            |
-   +----------+------------------------------+
-   | detSpec3 | 0                            |
-   +----------+------------------------------+
-   | detSpec4 | 0                            |
-   +----------+------------------------------+
-
-
-.. [#] **Bunch Id**: bunch identification number received by the detector at the moment of frame acquisition.
-.. [#] **Train Id**: train identification number received by the detector at the moment of frame acquisition.
-.. [#] **Bunch Id**: bunch identification number to identify every single exposure during a burst acquisition.

docs/src/udpheader.rst

@@ -1,146 +0,0 @@
-.. _detector udp header:
-
-Format
-=======
-
-The UDP data format for the packets consist of a common header of 48 bytes for all detectors, followed by the data for that one packet.
-
-
-Current Version
----------------------------
-
-**v2.0 (slsDetectorPackage v7.0.0+)**
-
-.. code-block:: cpp 
-    
-    typedef struct {
-        uint64_t frameNumber;
-        uint32_t expLength;
-        uint32_t packetNumber;
-        uint64_t detSpec1;
-        uint64_t timestamp;
-        uint16_t modId;
-        uint16_t row;
-        uint16_t column;
-        uint16_t detSpec2;
-        uint32_t detSpec3;
-        uint16_t detSpec4;
-        uint8_t detType;
-        uint8_t version;
-    } sls_detector_header;
-
-
-.. table:: <---------------------------------------------------- 8 bytes per row --------------------------------------------->
-    :align: center
-    :widths: 30,30,30,15,15
-
-    +---------------------------------------------------------------+
-    |                          frameNumber                          |
-    +-------------------------------+-------------------------------+
-    |            expLength          |         packetNumber          |
-    +-------------------------------+-------------------------------+
-    |                         **detSpec1**                          |
-    +---------------------------------------------------------------+
-    |                           timestamp                           |
-    +---------------+---------------+---------------+---------------+
-    |     modId     |      row      |     column    |  **detSpec2** |
-    +---------------+---------------+---------------+-------+-------+
-    |          **detSpec3**         |  **detSpec4** |detType|version|
-    +-------------------------------+---------------+-------+-------+
-
-
-.. note :: 
-
-    Since there is no difference in the format of the UDP header from the detector
-    from the previous version (v2.0), the version number stays the same.
-    
-    Only the struture member names have changed in sls_detector_defs.h
-
-
-
-Description
-------------
-
-* **Detector specific field** descriptions are found :ref:`here<detector specific fields>`.
-
-* **frameNumber**: framenumber to which the current packet belongs to.
-
-* **expLength**: measured exposure time of the frame in tenths of microsecond. It is instead the sub frame number for Eiger.
-
-* **packetNumber**: packet number of the frame to which the current data belongs to.
-
-* **timestamp**: time measured at the start of frame exposure since the start of the current measurement. It is expressed in tenths of microsecond.
-
-* **modId**: module ID picked up from det_id_[detector type].txt on the detector cpu.
-
-* **row**: row position of the module in the detector system. It is calculated by the order of the module in hostname command, as well as the detsize command. The modules are stacked row by row until they reach the y-axis limit set by detsize (if specified). Then, stacking continues in the next column and so on.
-
-* **column**: column position of the module in the detector system.  It is calculated by the order of the module in hostname command, as well as the detsize command. The modules are stacked row by row until they reach the y-axis limit set by detsize (if specified). Then, stacking continues in the next column and so on.
-
-* **detType**: detector type from enum of detectorType in the package.
-
-* **version**: current version of the detector header (0x2).
-
-
-.. _detector enum:
-
-Detector Enum
---------------
-
-    ================    ========
-    Detector Type        Value
-    ================    ========
-    GENERIC             0
-    EIGER               1
-    GOTTHARD            2    
-    JUNGFRAU            3    
-    CHIPTESTBOARD       4        
-    MOENCH              5
-    MYTHEN3             6
-    GOTTHARD2           7    
-    ================    ========
-
-
-
-Previous Versions
------------------
-**v2.0 (Package v4.0.0 -  6.x.x)**
-
-.. table:: <---------------------------------------------------- 8 bytes ---------------------------------------------------->
-    :align: center
-    :widths: 30,30,30,15,15
-
-    +---------------------------------------------------------------+
-    |                          frameNumber                          |
-    +-------------------------------+-------------------------------+
-    |            expLength          |         packetNumber          |
-    +-------------------------------+-------------------------------+
-    |                            bunchid                            |
-    +---------------------------------------------------------------+
-    |                           timestamp                           |
-    +---------------+---------------+---------------+---------------+
-    |     modId     |    **row**    |   **column**  |  **reserved** |
-    +---------------+---------------+---------------+-------+-------+
-    |             debug             |  roundRNumber |detType|version|
-    +-------------------------------+---------------+-------+-------+
-
-**v1.0 (Package v3.0.0 -  3.1.5)**
-
-.. table:: <---------------------------------------------------- 8 bytes ---------------------------------------------------->
-    :align: center
-    :widths: 30,30,30,15,15
-
-    +---------------------------------------------------------------+
-    |                          frameNumber                          |
-    +-------------------------------+-------------------------------+
-    |            expLength          |         packetNumber          |
-    +-------------------------------+-------------------------------+
-    |                            bunchid                            |
-    +---------------------------------------------------------------+
-    |                           timestamp                           |
-    +---------------+---------------+---------------+---------------+
-    |     modId     |    xCoord     |     yCoord    |    zCoord     |
-    +---------------+---------------+---------------+-------+-------+
-    |             debug             |  roundRNumber |detType|version|
-    +-------------------------------+---------------+-------+-------+
-

docs/src/virtualserver.rst

@@ -1,7 +1,6 @@
 .. _Virtual Detector Servers:
-
-Simulators
-===========
+Detector Simulators
+===================
 
 Compilation
 -----------
@@ -14,14 +13,16 @@ Compilation
 * Using cmk.sh script,
      .. code-block:: bash  
         
-        ./cmk.sh -bsj9 # option -s is for simulator
+        ./cmk.sh -bsj9 #option s is for simulator
 
 
 Binaries
 ^^^^^^^^
     .. code-block:: bash  
 
-        eigerDetectorServer_virtual
+        eigerDetectorServerMaster_virtual
+        eigerDetectorServerSlaveTop_virtual
+        eigerDetectorServerSlaveBottom_virtual
         jungfrauDetectorServer_virtual
         gotthardDetectorServer_virtual
         gotthard2DetectorServer_virtual
@@ -66,15 +67,7 @@ Sample Config file
 ^^^^^^^^^^^^^^^^^^
 There are sample config files for each detector in slsDetectorPackage/examples folder.
 
-For a Single Module (Basic)
-    .. code-block:: bash  
-
-        hostname localhost
-        rx_hostname localhost
-        udp_dstip auto
-
-
-For a Single Module (With Options)
+For a Single Module
     .. code-block:: bash  
 
         # connects to control port 1912
@@ -87,8 +80,7 @@ For a Single Module (With Options)
         udp_dstport 50012
 
         # source udp ips must be same subnet at destintaion udp ips
-        # takes the same ip as hostname
-        udp_srcip auto
+        udp_srcip 192.168.1.112
 
         # destination udp ip picked up from rx_hostname (if auto)
         udp_dstip auto
@@ -103,14 +95,12 @@ For Multiple Modules
         virtual 2 1912
         # or hostname localhost:1912+localhost:1914+
 
-        # increasing receiver tcp ports (multi detector command)
-        rx_tcpport 2012
+        # connects to receivers at ports 2012 and 2014
+        rx_hostname mpc1922:2012+mpc1922:2013+
 
-        # connects to reciever at port 2012 and 2013
-        rx_hostname mpc1922
-
-        # sets increasing destination udp ports
-        udp_dstport 50012
+        # sets differernt destination udp ports
+        0:udp_dstport 50012
+        1:udp_dstport 50014
 
         # source udp ips must be same subnet at destintaion udp ips
         0:udp_srcip 192.168.1.112
@@ -150,7 +140,7 @@ Gui
 Limitations
 -----------
 
-#. Data coming out of virtual server is fake. 
+#. Data coming out of virtual server is fake. Value at each pixel/ channel is incremented by 1.
 
 #. A stop will stop the virtual acquisition only at the start of every new frame.
 

docs/src/zmqjsonheaderformat.rst

@@ -1,137 +0,0 @@
-ZMQ: Json Header Format
-========================
-
-
-**Change in field names from slsDetectorPackage v6.x.x to v7.0.0**
-
-* detSpec1 <- bunchId
-* detSpec2 <- reserved
-* detSpec3 <- debug
-* detSpec4 <- roundRNumber
-
-
-**Format**
-
-    .. code-block:: bash 
-
-        {
-            "jsonversion": unsigned int,
-            "bitmode": unsigned int,
-            "fileIndex": unsigned long int,
-            "detshape": [
-                unsigned int,
-                unsigned int
-            ],
-            "shape": [
-                unsigned int,
-                unsigned int
-            ],
-            "size": unsigned int,
-            "acqIndex": unsigned long int,
-            "frameIndex": unsigned long int,
-            "progress": double,
-            "fname": string,
-            "data": unsigned int,
-            "completeImage": unsigned int,
-
-            "frameNumber": unsigned long long int,
-            "expLength": unsigned int,
-            "packetNumber": unsigned int,
-            "detSpec1": unsigned long int,
-            "timestamp": unsigned long int,
-            "modId": unsigned int,
-            "row": unsigned int,
-            "column": unsigned int,
-            "detSpec2": unsigned int,
-            "detSpec3": unsigned int,
-            "detSpec4": unsigned int,
-            "detType": unsigned int,
-            "version": unsigned int,
-            
-            "flipRows": unsigned int,
-            "quad": unsigned int,
-            "addJsonHeader": {
-                string : string
-            }
-        }
-
-   +--------------+----------------------------------------------+
-   |   Field      |       Description                            |
-   +--------------+----------------------------------------------+
-   | jsonversion  | Version of the json header.                  |
-   |              | Value at 4 for v6.x.x and v7.x.x             |
-   +--------------+----------------------------------------------+
-   | bitmode      | Bits per pixel [4|8|16|32]                   |
-   +--------------+----------------------------------------------+
-   | fileIndex    | Current file acquisition index               |
-   +--------------+----------------------------------------------+
-   | detshape     | Geometry of the entire detector              |
-   +--------------+----------------------------------------------+
-   | shape        | Geometry of the current port streamed out    |
-   +--------------+----------------------------------------------+
-   | size         | Size of image of current port in bytesout    |
-   +--------------+----------------------------------------------+
-   | acqIndex     | Frame number from the detector (redundant)   |
-   +--------------+----------------------------------------------+
-   | frameIndex   | Frame number of current acquisition          |
-   |              | (Starting at 0)                              |
-   +--------------+----------------------------------------------+
-   | progress     | Progress of current acquisition in %         |
-   +--------------+----------------------------------------------+
-   | fname        | Current file name                            |
-   +--------------+----------------------------------------------+
-   | data         | 1 if there is data following                 |
-   |              | 0 if dummy header                            |
-   +--------------+----------------------------------------------+
-   | completeImage| 1 if no missing packets for this frame       |
-   |              | in this port, else 0                         |
-   +--------------+----------------------------------------------+
-   | frameNumber  | Frame number                                 |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | expLength    | subframe number (32 bit eiger)               |
-   |              | or real time exposure time in 100ns (others) |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | packetNumber | Number of packets caught for that frame      |
-   +--------------+----------------------------------------------+
-   | detSpec1     | See :ref:`here<Detector Specific Fields>`    |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | timestamp    | Timestamp with 10 MHz clock                  |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | modId        | Module Id                                    |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | row          | Row number in detector                       |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | column       | Column number in detector                    |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | detSpec2     | See :ref:`here<Detector Specific Fields>`    |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | detSpec3     | See :ref:`here<Detector Specific Fields>`    |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | detSpec4     | See :ref:`here<Detector Specific Fields>`    |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | detType      | Detector type enum                           |
-   | detSpec3     | See :ref:`Detector enum<detector enum>`      |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | version      | Detector header version. At 2                |
-   |              | [From detector udp header]                   |
-   +--------------+----------------------------------------------+
-   | flipRows     | 1 if rows should be flipped.                 |
-   |              | Usually for Eiger bottom.                    |
-   +--------------+----------------------------------------------+
-   | quad         | 1 if its an Eiger quad.                      |
-   +--------------+----------------------------------------------+
-   | addJsonHeader| Optional custom parameters that is required  |
-   |              | for processing code.                         |
-   +--------------+----------------------------------------------+
-

docs/static/extra.css

@@ -1,4 +1,4 @@
 /* override table no-wrap */
 .wy-table-responsive table td, .wy-table-responsive table th {
     white-space: normal;
-}
+}

evalVersionVariables.sh

@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: LGPL-3.0-or-other
+# Copyright (C) 2021 Contributors to the SLS Detector Package
+GITREPO1='git remote -v'
+GITREPO2=" | grep \"fetch\" | cut -d' ' -f1"
+BRANCH1='git branch -v'
+BRANCH2=" | grep '*' | cut -d' ' -f2"
+REPUID1='git log --pretty=format:"%H" -1'
+AUTH1_1='git log --pretty=format:"%cn" -1'
+AUTH1_2=" | cut -d' ' -f1"
+AUTH2_1='git log --pretty=format:"%cn" -1'
+AUTH2_2=" | cut -d' ' -f2"
+FOLDERREV1='git log --oneline . '   #used for all the individual server folders
+FOLDERREV2=" | wc -l"  #used for all the individual server folders
+REV1='git log --oneline  '
+REV2=" | wc -l"
+
+GITREPO=`eval $GITREPO1  $GITREPO2`
+BRANCH=`eval $BRANCH1  $BRANCH2`
+REPUID=`eval $REPUID1`
+AUTH1=`eval $AUTH1_1  $AUTH1_2`
+AUTH2=`eval $AUTH2_1  $AUTH2_2`
+REV=`eval $REV1  $REV2`
+FOLDERREV=`eval $FOLDERREV1  $FOLDERREV2`
+

examples/badchannel.txt

@@ -1,6 +0,0 @@
-0
-10, 30
-40:45 50:52
-1279
-# all bad channels are applied for all counters in deector
-

examples/eiger_10Gb.config

@@ -4,33 +4,27 @@ detsize 1024 512
 # detector hostname for controls
 hostname beb059+beb058+ 
 
-# increasing receiver tcp port (multi detector command)
-rx_tcpport 1991
-
-# 1Gb receiver pc hostname to configure receiver
-rx_hostname x12sa-vcons
-
-# or 1Gb receiver pc hostname with tcp port to configure receiver
-#rx_hostname x12sa-vcons:1991+x12sa-vcons:1992
-
-# increasing udp destination ports for all half modules
-udp_dstport 50011
+# 1Gb receiver pc hostname with tcp port to configure receiver
+rx_hostname x12sa-vcons:1991+x12sa-vcons:1992
 
 # udp port first quadrant, first halfmodule         
-#0:udp_dstport 50011 
+0:udp_dstport 50011 
+
 # udp port second quadrant, first halfmodule       
-#0:udp_dstport2 50012 
-# udp port first quadrant, second halfmodule       
-#1:udp_dstport 50013 
-# udp port second quadrant, second halfmodule  
-#1:udp_dstport2 50014 
-    
+0:udp_dstport2 50012 
+
 # udp IP of the receiver over 10Gb              
 0:udp_dstip 10.0.30.210 
 
 # first half module 10 Gb IP (same subnet as 0:udp_dstip)
 0:udp_srcip 10.0.30.100 
 
+# udp port first quadrant, second halfmodule       
+1:udp_dstport 50013 
+
+# udp port second quadrant, second halfmodule  
+1:udp_dstport2 50014 
+    
 # udp IP of the receiver over 10Gb, 
 1:udp_dstip 10.0.40.210  
 

examples/eiger_1Gb.config

@@ -4,23 +4,18 @@ detsize 1024 512
 # detector hostname for controls
 hostname beb059+beb058+ 
 
-# increasing receiver tcp port (multi detector command)
-rx_tcpport 1991
-
-# 1Gb receiver pc hostname to configure receiver
-rx_hostname x12sa-vcons
-
-# increasing udp destination ports for all half modules
-udp_dstport 50011
+# 1Gb receiver pc hostname with tcp port to configure receiver
+rx_hostname x12sa-vcons:1991+x12sa-vcons:1992
 
 # udp port first quadrant, first halfmodule         
-#0:udp_dstport 50011 
+0:udp_dstport 50011 
 #udp port second quadrant, first halfmodule       
-#0:udp_dstport2 50012 
+0:udp_dstport2 50012 
+
 # udp port first quadrant, second halfmodule       
-#1:udp_dstport 50013 
+1:udp_dstport 50013 
 # udp port second quadrant, second halfmodule  
-#1:udp_dstport2 50014 
+1:udp_dstport2 50014 
     
 # output directory
 fpath /sls/X12SA/data/x12saop/Data10/Eiger0.5M

examples/jungfrau_two.config

@@ -4,18 +4,14 @@ detsize 1024 1024
 # detector hostname
 hostname bchip048+bchip052+
 
-# increasing receiver ports 1954 and 1955 (multi detector command)
-rx_tcpport 1954
-
-# 1Gb receiver pc hostname
-rx_hostname pcmoench01
+# 1Gb receiver pc hostname  (default tcpport: 1954)
+rx_hostname pcmoench01+pcmoench01:1955
 
 
-# increasing udp ports 50004 and 50005 (multi detector command)
-udp_dstport 50004
-# or custom udp destination port (receiver) for 1st module
-#0:udp_dstport 50014
 
+# udp configurations for 1st module
+# udp destination port (receiver)
+0:udp_dstport 50004
 
 # udp destination ip (receiver)
 0:udp_dstip 10.1.1.100
@@ -23,11 +19,17 @@ udp_dstport 50004
 # udp source ip (same subnet as 0:udp_dstip)
 0:udp_srcip 10.1.1.10
 
+
+
+# udp configurations for 2nd module
+# udp destination port (receiver)
+1:udp_dstport 50005
+
 # udp destination ip (receiver)
-1:udp_dstip 10.1.2.100
+1:udp_dstip 10.1.1.100
 
 # udp source ip (same subnet as 1:udp_dstip)
-1:udp_srcip 10.1.2.11
+1:udp_srcip 10.1.1.11
 
 
 
@@ -43,5 +45,5 @@ timing trigger
 # output file directory
 fpath /external_pool/jungfrau_data/softwaretest
 
-# disable file writing (default)
+# disable file writing
 fwrite 0

examples/moench03_T1.config

@@ -3,33 +3,33 @@
 ### edit with hostname or IP address of your detector 
 ############################################
 #hostname bchip181+
-hostname bchip135 
+hostname bchip119.psi.ch
 
 #############################################
 ### edit with hostname or 1Gbs IP address of your server
 ############################################
-rx_hostname mpc2011
+rx_hostname mpc2011:1777
 
 #############################################
 ### edit with 10 Gbs IP of your server
 ############################################
-udp_dstip 10.1.1.102
+udp_dstip 10.1.2.102
 #############################################
 ### edit with any number in the subnet of your server (first 3 numbers as above)
 ############################################
-udp_srcip 10.1.1.19
-udp_dstport 32411
+udp_srcip 10.1.2.19
+udp_dstport 32000
 
 #############################################
 ### edit with 10 Gbs IP of your server
 ############################################
-rx_zmqip 10.1.1.102
-rx_zmqport 50003
+rx_zmqip 10.1.2.102
+rx_zmqport 77000
 #############################################
 ### edit with 1 Gbs IP of PC where you will run the GUI
 ############################################
-zmqip 129.129.202.57
-zmqport 50001
+zmqip  129.129.202.132
+zmqport 77001
 
 
 
@@ -38,7 +38,7 @@ rx_zmqstream 1
 
 
 
-frames 100000
+frames 1000
 period 0.0006
 exptime 0.00035
 
@@ -62,3 +62,9 @@ highvoltage 90
 #adcreg 0x14 0x40
 
 
+
+frames 10
+period 0.1
+rx_jsonpara subframes 1
+rx_jsonpara frameMode raw
+rx_jsonpara detectorMode analog

examples/rawdata.config

@@ -1,22 +0,0 @@
-numfiles 1
-nthreads 5,
-fifosize 5000
-nsigma 5
-gainfile none
-detectorMode counting
-threshold 0
-pedestalfile none
-nframes 0
-xMin 0
-xMax 400
-yMin 0
-yMax 400
-outdir ./
-indir ./
-flist none
-fformat none
-runmin 0
-runmax -1
-readnrows 400
-eMin 0
-eMax 16000

examples/virtual_ctb_moench.config

@@ -1,18 +1,18 @@
 # detector hostname
 hostname localhost:1910
 
-# udp destination ports
-udp_dstport 50010
-
-# udp source ip (same subnet as udp_dstip)
-udp_srcip 192.168.1.100
-
 # receiver hostname
 rx_hostname mpc1922:2010
 
+# udp destination ports
+udp_dstport 50010
+
 # udp destination ip from rx_hostname
 udp_dstip auto
 
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 192.168.1.100
+
 # output file directory
 fpath /tmp
 
@@ -27,7 +27,418 @@ dbitclk 40
 
 
 # patterns
-pattern /tmp/pattern.pat
+patword 0x0000 0x0000000000000000
+patword 0x0001 0x0000000000000000
+patword 0x0002 0x0008000900080000
+patword 0x0003 0x0008000900080000
+patword 0x0004 0x0008000900080000
+patword 0x0005 0x0008000900080000
+patword 0x0006 0x0008000900080000
+patword 0x0007 0x0008000900080000
+patword 0x0008 0x0008000900080000
+patword 0x0009 0x0008000900080000
+patword 0x000a 0x0008000900080000
+patword 0x000b 0x0008000900080000
+patword 0x000c 0x0008000900080000
+patword 0x000d 0x0008000900080000
+patword 0x000e 0x0008000900080000
+patword 0x000f 0x0008000900080000
+patword 0x0010 0x0008000900080000
+patword 0x0011 0x0008000900080000
+patword 0x0012 0x0008000900080000
+patword 0x0013 0x0008000900080000
+patword 0x0014 0x0008000900080000
+patword 0x0015 0x0008000900080000
+patword 0x0016 0x0008400900080020
+patword 0x0017 0x0008400900080020
+patword 0x0018 0x0008599f0418503a
+patword 0x0019 0x0008599f0418503a
+patword 0x001a 0x0108599f0418503a
+patword 0x001b 0x0108599f0418503a
+patword 0x001c 0x0108599f0418503a
+patword 0x001d 0x0108599f0418503a
+patword 0x001e 0x0108599f0418503a
+patword 0x001f 0x0108599f0418503a
+patword 0x0020 0x0108599f0418503a
+patword 0x0021 0x0108599f0418503a
+patword 0x0022 0x0108599f0418503a
+patword 0x0023 0x0108599f0418503a
+patword 0x0024 0x0108599f0418503a
+patword 0x0025 0x0108599f0418503a
+patword 0x0026 0x0108599f0418503a
+patword 0x0027 0x0108599f0418503a
+patword 0x0028 0x0108599f0418503a
+patword 0x0029 0x0108599f0418503a
+patword 0x002a 0x0108599f0418503a
+patword 0x002b 0x0108599f0418503a
+patword 0x002c 0x0108599f0418503a
+patword 0x002d 0x0108599f0418503a
+patword 0x002e 0x0108599f0418503a
+patword 0x002f 0x0108599f0418503a
+patword 0x0030 0x0108599f0418503a
+patword 0x0031 0x0108599f0418503a
+patword 0x0032 0x0108599f0418503a
+patword 0x0033 0x0108599f0418503a
+patword 0x0034 0x0108599f0418503a
+patword 0x0035 0x0108599f0418503a
+patword 0x0036 0x0108599f0418503a
+patword 0x0037 0x0108599f0418503a
+patword 0x0038 0x0108599f0418503a
+patword 0x0039 0x0108599f0418503a
+patword 0x003a 0x0108599f0418503a
+patword 0x003b 0x0108599f0418503a
+patword 0x003c 0x0108599f0418503a
+patword 0x003d 0x0108599f0418503a
+patword 0x003e 0x0108599f0418503a
+patword 0x003f 0x0108599f0418503a
+patword 0x0040 0x0108599f0418503a
+patword 0x0041 0x0108599f0418503a
+patword 0x0042 0x0108599f0418503a
+patword 0x0043 0x0108599f0418503a
+patword 0x0044 0x0108599f0418503a
+patword 0x0045 0x0108599f0418503a
+patword 0x0046 0x0108599f0418503a
+patword 0x0047 0x0108599f0418503a
+patword 0x0048 0x0108599f0418503a
+patword 0x0049 0x0108599f0418503a
+patword 0x004a 0x0108599f0418503a
+patword 0x004b 0x0108599f0418503a
+patword 0x004c 0x0108599f0418503a
+patword 0x004d 0x0108599f0418503a
+patword 0x004e 0x0108599f0418503a
+patword 0x004f 0x0108599f0418503a
+patword 0x0050 0x0108599f0418503a
+patword 0x0051 0x0108599f0418503a
+patword 0x0052 0x0108599f0418503a
+patword 0x0053 0x0108599f0418503a
+patword 0x0054 0x0108599f0418503a
+patword 0x0055 0x0108599f0418503a
+patword 0x0056 0x0108599f0418503a
+patword 0x0057 0x0108599f0418503a
+patword 0x0058 0x0108599f0418503a
+patword 0x0059 0x0108599f0418503a
+patword 0x005a 0x0108599f0418503a
+patword 0x005b 0x0108599f0418503a
+patword 0x005c 0x0108599f0418503a
+patword 0x005d 0x0108599f0418503a
+patword 0x005e 0x0108599f0418503a
+patword 0x005f 0x0108599f0418503a
+patword 0x0060 0x0108599f0418503a
+patword 0x0061 0x0108599f0418503a
+patword 0x0062 0x0108599f0418503a
+patword 0x0063 0x0108599f0418503a
+patword 0x0064 0x0108599f0418503a
+patword 0x0065 0x0108599f0418503a
+patword 0x0066 0x0108599f0418503a
+patword 0x0067 0x0108599f0418503a
+patword 0x0068 0x0108599f0418503a
+patword 0x0069 0x0108599f0418503a
+patword 0x006a 0x0108599f0418503a
+patword 0x006b 0x0108599f0418503a
+patword 0x006c 0x0108599f0418503a
+patword 0x006d 0x0108599f0418503a
+patword 0x006e 0x0108599f0418503a
+patword 0x006f 0x0108599f0418503a
+patword 0x0070 0x0108599f0418503a
+patword 0x0071 0x0108599f0418503a
+patword 0x0072 0x0108599f0418503a
+patword 0x0073 0x0108599f0418503a
+patword 0x0074 0x0108599f0418503a
+patword 0x0075 0x0108599f0418503a
+patword 0x0076 0x0108599f0418503a
+patword 0x0077 0x0108599f0418503a
+patword 0x0078 0x0108599f0418503a
+patword 0x0079 0x0108599f0418503a
+patword 0x007a 0x0108599f0418503a
+patword 0x007b 0x0108599f0418503a
+patword 0x007c 0x0108599f0418503a
+patword 0x007d 0x0108599f0418503a
+patword 0x007e 0x010859960418503a
+patword 0x007f 0x010859960418503a
+patword 0x0080 0x010859960418503a
+patword 0x0081 0x010859960418503a
+patword 0x0082 0x010859960418503a
+patword 0x0083 0x010859960418503a
+patword 0x0084 0x010859960418503a
+patword 0x0085 0x010859960418503a
+patword 0x0086 0x010859960418503a
+patword 0x0087 0x010859960418503a
+patword 0x0088 0x010859960418503a
+patword 0x0089 0x010859960418503a
+patword 0x008a 0x010859960418503a
+patword 0x008b 0x010859960418503a
+patword 0x008c 0x010859960418503a
+patword 0x008d 0x010859960418503a
+patword 0x008e 0x010859960418503a
+patword 0x008f 0x010859960418503a
+patword 0x0090 0x010859960418503a
+patword 0x0091 0x010859960418503a
+patword 0x0092 0x010819960418501a
+patword 0x0093 0x010819960418501a
+patword 0x0094 0x010819960418501a
+patword 0x0095 0x010819960418501a
+patword 0x0096 0x030819960418501a
+patword 0x0097 0x030819960418501a
+patword 0x0098 0x030819960418501a
+patword 0x0099 0x030819960418501a
+patword 0x009a 0x030819960418501a
+patword 0x009b 0x030819960418501a
+patword 0x009c 0x030819960418501a
+patword 0x009d 0x030819960418501a
+patword 0x009e 0x030819960418501a
+patword 0x009f 0x030819960418501a
+patword 0x00a0 0x030819960418501a
+patword 0x00a1 0x030819960418501a
+patword 0x00a2 0x030819960418501a
+patword 0x00a3 0x030819960418501a
+patword 0x00a4 0x030819960418501a
+patword 0x00a5 0x030819960418501a
+patword 0x00a6 0x030819960418501a
+patword 0x00a7 0x030819960418501a
+patword 0x00a8 0x030819960418501a
+patword 0x00a9 0x030819960418501a
+patword 0x00aa 0x030819960418501a
+patword 0x00ab 0x030819960418501a
+patword 0x00ac 0x030819960008501a
+patword 0x00ad 0x030819960008501a
+patword 0x00ae 0x030819960008501a
+patword 0x00af 0x030819960008501a
+patword 0x00b0 0x030819960008501a
+patword 0x00b1 0x030819960008501a
+patword 0x00b2 0x030819960008501a
+patword 0x00b3 0x030819960008501a
+patword 0x00b4 0x030819960008501a
+patword 0x00b5 0x030819960008501a
+patword 0x00b6 0x030819960008501a
+patword 0x00b7 0x030819960008501a
+patword 0x00b8 0x030819960008501a
+patword 0x00b9 0x030819960008501a
+patword 0x00ba 0x030819960008501a
+patword 0x00bb 0x030819960008501a
+patword 0x00bc 0x030819960008501a
+patword 0x00bd 0x030819960008501a
+patword 0x00be 0x030819960008501a
+patword 0x00bf 0x030819960008501a
+patword 0x00c0 0x0308199f0008501a
+patword 0x00c1 0x0308199f0008501a
+patword 0x00c2 0x0308199f0008501a
+patword 0x00c3 0x0308199f0008501a
+patword 0x00c4 0x0308199f0008501a
+patword 0x00c5 0x0308199f0008501a
+patword 0x00c6 0x0308199f0008501a
+patword 0x00c7 0x0308199f0008501a
+patword 0x00c8 0x0308199f0008501a
+patword 0x00c9 0x0308199f0008501a
+patword 0x00ca 0x0308199f0008501a
+patword 0x00cb 0x0308199f0008501a
+patword 0x00cc 0x0308199f0008501a
+patword 0x00cd 0x0308199f0008501a
+patword 0x00ce 0x0308199f0008501a
+patword 0x00cf 0x0308199f0008501a
+patword 0x00d0 0x0308199f0008501a
+patword 0x00d1 0x0308199f0008501a
+patword 0x00d2 0x0308199f0008501a
+patword 0x00d3 0x0308199f0008501a
+patword 0x00d4 0x0308599f0008503a
+patword 0x00d5 0x0308599f0008503a
+patword 0x00d6 0x030c599f000850ba
+patword 0x00d7 0x030c599f000850ba
+patword 0x00d8 0x030c599f000850ba
+patword 0x00d9 0x030c599f000850ba
+patword 0x00da 0x030c599f000850ba
+patword 0x00db 0x030c599f000850ba
+patword 0x00dc 0x030c599f000850ba
+patword 0x00dd 0x030c599f000850ba
+patword 0x00de 0x030c599f000850ba
+patword 0x00df 0x030c599f000850ba
+patword 0x00e0 0x030c599f000850ba
+patword 0x00e1 0x030c599f000850ba
+patword 0x00e2 0x030c599f000850ba
+patword 0x00e3 0x030c599f000850ba
+patword 0x00e4 0x030c599f000850ba
+patword 0x00e5 0x030c599f000850ba
+patword 0x00e6 0x030c599f000850ba
+patword 0x00e7 0x030c599f000850ba
+patword 0x00e8 0x030c599f000850ba
+patword 0x00e9 0x030c599f000850ba
+patword 0x00ea 0x030c799f010858ba
+patword 0x00eb 0x030c799f010858ba
+patword 0x00ec 0x030c599f000850ba
+patword 0x00ed 0x030c599f000850ba
+patword 0x00ee 0x030c599f000850ba
+patword 0x00ef 0x030c599f000850ba
+patword 0x00f0 0x030c599f000850ba
+patword 0x00f1 0x030c599f000850ba
+patword 0x00f2 0x030c599f000850ba
+patword 0x00f3 0x030c599f000850ba
+patword 0x00f4 0x030c599f000850ba
+patword 0x00f5 0x030c599f000850ba
+patword 0x00f6 0x030c599f000850ba
+patword 0x00f7 0x030c599f000850ba
+patword 0x00f8 0x030c599f000850ba
+patword 0x00f9 0x030c599f000850ba
+patword 0x00fa 0x030c599f000850ba
+patword 0x00fb 0x030c599f000850ba
+patword 0x00fc 0x030c599f000850ba
+patword 0x00fd 0x030c599f000850ba
+patword 0x00fe 0x030c599f000850ba
+patword 0x00ff 0x030c599f000850ba
+patword 0x0100 0x030c599f000850ba
+patword 0x0101 0x030c599f000850ba
+patword 0x0102 0x030c599f400850ba
+patword 0x0103 0x030c599f400850ba
+patword 0x0104 0x030c599f600850ba
+patword 0x0105 0x030c599f400850ba
+patword 0x0106 0x030c599f400850ba
+patword 0x0107 0x030c599f400850ba
+patword 0x0108 0x870c599f682e50ba
+patword 0x0109 0x870c599f482850ba
+patword 0x010a 0x870c599f000e50ba
+patword 0x010b 0x870c599f000850ba
+patword 0x010c 0x870c599f000e50ba
+patword 0x010d 0x870c599f000850ba
+patword 0x010e 0x870c599f000e50ba
+patword 0x010f 0x870c599f000850ba
+patword 0x0110 0x870c599f000e50ba
+patword 0x0111 0x870c599f000850ba
+patword 0x0112 0x870c599f000e50ba
+patword 0x0113 0x870c599f000850ba
+patword 0x0114 0x870c599f000e50ba
+patword 0x0115 0x870c599f000850ba
+patword 0x0116 0x870c599f000e50ba
+patword 0x0117 0x870c599f000850ba
+patword 0x0118 0x870c599f000e50ba
+patword 0x0119 0x870c599f000850ba
+patword 0x011a 0x870c599f000e50ba
+patword 0x011b 0x870c599f000850ba
+patword 0x011c 0x870c599f000e50ba
+patword 0x011d 0x870c599f000850ba
+patword 0x011e 0x870c599f000e50ba
+patword 0x011f 0x870c599f000850ba
+patword 0x0120 0x870c599f000e50ba
+patword 0x0121 0x870c599f000850ba
+patword 0x0122 0x870c599f200e50ba
+patword 0x0123 0x870c599f000850ba
+patword 0x0124 0x870c599f000e50ba
+patword 0x0125 0x870c599f000850ba
+patword 0x0126 0x870c599f000e50ba
+patword 0x0127 0x870c599f000850ba
+patword 0x0128 0x870c599f000e50ba
+patword 0x0129 0x870c599f000850ba
+patword 0x012a 0x870c599f000e50ba
+patword 0x012b 0x870c599f000850ba
+patword 0x012c 0x870c599f000e50ba
+patword 0x012d 0x870c599f000850ba
+patword 0x012e 0x870c599f000e50ba
+patword 0x012f 0x870c599f000850ba
+patword 0x0130 0x870c599f000e50ba
+patword 0x0131 0x870c599f000850ba
+patword 0x0132 0x870c599f000e50ba
+patword 0x0133 0x870c599f000850ba
+patword 0x0134 0x870c599f000e50ba
+patword 0x0135 0x870c599f000850ba
+patword 0x0136 0x870c599f000e50ba
+patword 0x0137 0x870c599f000850ba
+patword 0x0138 0x870c599f000e50ba
+patword 0x0139 0x870c599f000850ba
+patword 0x013a 0x870c599f282e50ba
+patword 0x013b 0x870c599f082850ba
+patword 0x013c 0x870c599f000e50ba
+patword 0x013d 0x870c599f000850ba
+patword 0x013e 0x870c599f000e50ba
+patword 0x013f 0x870c599f000850ba
+patword 0x0140 0x870c599f000e50ba
+patword 0x0141 0x870c599f000850ba
+patword 0x0142 0x870c599f000e50ba
+patword 0x0143 0x870c599f000850ba
+patword 0x0144 0x870c599f000e50ba
+patword 0x0145 0x870c599f000850ba
+patword 0x0146 0x870c599f000e50ba
+patword 0x0147 0x870c599f000850ba
+patword 0x0148 0x870c599f000e50ba
+patword 0x0149 0x870c599f000850ba
+patword 0x014a 0x870c599f000e50ba
+patword 0x014b 0x870c599f000850ba
+patword 0x014c 0x870c599f000e50ba
+patword 0x014d 0x870c599f000850ba
+patword 0x014e 0x870c599f000e50ba
+patword 0x014f 0x870c599f000850ba
+patword 0x0150 0x870c599f000e50ba
+patword 0x0151 0x870c599f000850ba
+patword 0x0152 0x870c599f000e50ba
+patword 0x0153 0x870c599f000850ba
+patword 0x0154 0x870c599f200e50ba
+patword 0x0155 0x870c599f000850ba
+patword 0x0156 0x870c599f000e50ba
+patword 0x0157 0x870c599f000850ba
+patword 0x0158 0x870c599f000e50ba
+patword 0x0159 0x870c599f000850ba
+patword 0x015a 0x870c599f000e50ba
+patword 0x015b 0x870c599f000850ba
+patword 0x015c 0x870c599f000e50ba
+patword 0x015d 0x870c599f000850ba
+patword 0x015e 0x870c599f000e50ba
+patword 0x015f 0x870c599f000850ba
+patword 0x0160 0x870c599f000e50ba
+patword 0x0161 0x870c599f000850ba
+patword 0x0162 0x870c599f000e50ba
+patword 0x0163 0x870c599f000850ba
+patword 0x0164 0x870c599f000e50ba
+patword 0x0165 0x870c599f000850ba
+patword 0x0166 0x870c599f000e50ba
+patword 0x0167 0x870c599f000850ba
+patword 0x0168 0x870c599f000e50ba
+patword 0x0169 0x870c599f000850ba
+patword 0x016a 0x870c599f000e50ba
+patword 0x016b 0x870c599f000850ba
+patword 0x016c 0x070c599f000850ba
+patword 0x016d 0x070c599f000850ba
+patword 0x016e 0x000c599f000850ba
+patword 0x016f 0x000c599f000850ba
+patword 0x0170 0x0008599f200e503a
+patword 0x0171 0x0008599f0008503a
+patword 0x0172 0x0008599f200e503a
+patword 0x0173 0x0008599f0008503a
+patword 0x0174 0x0008599f0008503a
+patword 0x0175 0x0008599f0008503a
+patword 0x0176 0x0008599f0008503a
+patword 0x0177 0x0008599f0008503a
+patword 0x0178 0x0008599f0008503a
+patword 0x0179 0x0008599f0008503a
+patword 0x017a 0x0008599f0008503a
+patword 0x017b 0x0008599f0008503a
+patword 0x017c 0x0008599f0008503a
+patword 0x017d 0x0008599f0008503a
+patword 0x017e 0x0008599f0008503a
+patword 0x017f 0x0008599f0008503a
+patword 0x0180 0x0008599f0008503a
+patword 0x0181 0x0008599f0008503a
+patword 0x0182 0x0008599f0008503a
+patword 0x0183 0x0008599f0008503a
+patword 0x0184 0x0008599f0008503a
+patword 0x0185 0x0008599f0008503a
+patword 0x0186 0x0008599f0008503a
+patword 0x0187 0x0008599f0008503a
+patword 0x0188 0x0008599f0008503a
+patword 0x0189 0x0008599f0008503a
+patword 0x018a 0x0008599f0008503a
+patword 0x018b 0x0008599f0008503a
+patword 0x018c 0x0008599f0008503a
+patword 0x018d 0x0008599f0008503a
+patioctrl 0x8f0effff6dbffdbf
+patlimits 0x0000 0x018c
+patloop 0 0x013a 0x016b
+patnloop 0 0x199
+patloop 1 0x0400 0x0400
+patnloop 1 0
+patloop 2 0x0400 0x0400
+patnloop 2 0
+patwait 0 0x00aa
+patwaittime 0 10000
+patwait 1 0x0400
+patwaittime 1 0
+patwait 2 0x0400
+patwaittime 2 0
 
 # dacs
 dac 6 800

examples/virtual_eiger_1_half_module.config

@@ -1,13 +1,13 @@
 # detector hostname
 hostname localhost:1900
 
+# receiver hostname
+rx_hostname mpc1922:2000
+
 # udp destination ports
 udp_dstport 50000
 udp_dstport2 50001
 
-# receiver hostname
-rx_hostname mpc1922:2000
-
 # udp destination ip from rx_hostname
 udp_dstip auto
 

examples/virtual_eiger_2_half_modules.config

@@ -1,13 +1,15 @@
 # detector hostname
 hostname localhost:1900+localhost:1902+
 
-# udp destination ports
-udp_dstport 50000
-udp_dstport2 50001
-
 # receiver hostname
 rx_hostname mpc1922:2000+mpc1922:2001+
 
+# udp destination ports
+0:udp_dstport 50000
+0:udp_dstport2 50001
+1:udp_dstport 50002
+1:udp_dstport2 50003
+
 # udp destination ip from rx_hostname
 udp_dstip auto
 

examples/virtual_gotthard.config

@@ -1,18 +1,18 @@
 # detector hostname
 hostname localhost:1904
 
-# udp destination ports
-udp_dstport 50004
-
-# udp source ip (same subnet as udp_dstip)
-udp_srcip 192.168.1.100
-
 # receiver hostname
 rx_hostname mpc1922:2004
 
+# udp destination ports
+udp_dstport 50004
+
 # udp destination ip from rx_hostname
 udp_dstip auto
 
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 192.168.1.100
+
 # output file directory
 fpath /tmp
 

examples/virtual_gotthard2.config

@@ -1,12 +1,24 @@
 # detector hostname
 hostname localhost:1914
 
+# receiver hostname
+rx_hostname mpc1922:2014
+
 # udp destination ports
 udp_dstport 50014
 
+# udp destination ip from rx_hostname
+udp_dstip auto
+
 # udp source ip (same subnet as udp_dstip)
 udp_srcip 192.168.1.100
 
+# output file directory
+fpath /tmp
+
+# disable file writing
+fwrite 0
+
 # enable 2nd interface for veto debugging
 # udp destination port for veto
 udp_dstport2 50015
@@ -15,18 +27,6 @@ udp_dstip2 auto
 # udp source ip (same subnet as udp_dstip)
 udp_srcip2 192.168.1.100
 
-# receiver hostname
-rx_hostname mpc1922:2014
-
-# udp destination ip from rx_hostname
-udp_dstip auto
-
-# output file directory
-fpath /tmp
-
-# disable file writing
-fwrite 0
-
 # to enable 2nd interface for veto debugging
 numinterfaces 2
 

examples/virtual_jungfrau.config

@@ -1,21 +1,21 @@
 # detector hostname
 hostname localhost:1906
 
+# receiver hostname
+rx_hostname mpc1922:2006
+
 # udp destination ports
 udp_dstport 50006
 udp_dstport2 50007
 
-# udp source ip (same subnet as udp_dstip)
-udp_srcip 192.168.1.100
-udp_srcip2 192.168.1.100
-
-# receiver hostname
-rx_hostname mpc1922:2006
-
 # udp destination ip from rx_hostname
 udp_dstip auto
 udp_dstip2 auto
 
+# udp source ip (same subnet as udp_dstip)
+udp_srcip 192.168.1.100
+udp_srcip2 192.168.1.100
+
 # output file directory
 fpath /tmp