Merge branch 'main' into 6.1.2.rc

* updated pybind and catch
* added to release notes
Co-authored-by: Erik Frojdh <erik.frojdh@psi.ch>

CMakeLists.txt

@@ -2,7 +2,7 @@
 # Copyright (C) 2021 Contributors to the SLS Detector Package
 cmake_minimum_required(VERSION 3.12)
 project(slsDetectorPackage)
-set(PROJECT_VERSION 6.1.0)
+set(PROJECT_VERSION 6.1.2)
 
 set(CMAKE_CXX_FLAGS_RELEASE "-O3 -DNDEBUG")
 

RELEASE.txt

@@ -1,170 +1,158 @@
-SLS Detector Package Minor Release 6.1.0 released on 25.11.2021
+SLS Detector Package Patch Release 6.1.2 released on 25.11.2022
 ===============================================================
 
-This document describes the differences between v6.1.0 and v6.0.0.   
-
+This document describes the differences between v6.1.2 and v6.1.1.   
 
 
     CONTENTS
     --------
-    1.  New or Changed Features
-    2.  Resolved Issues
-    3.  Firmware Requirements
-    4.  Kernel Requirements
-    5.  Download, Documentation & Support
+    1.  Resolved Issues
+    2.  On-board Detector Server Compatibility
+    2.  Firmware Requirements
+    3.  Kernel Requirements
+    4.  Download, Documentation & Support
 
 
 
-
-1. New or Changed Features
-==========================
-
-    Client
-    ------
-
-    1.  Kernel version
-        Commandline: kernelversion, API: getKernelVersion
-
-    2.  [Jungfrau][Mythen3][Gotthard2][Gotthard][Moench][Ctb]
-        Update Kernel
-        Commandline: updatekernel, API: updatekernel
-        You could damage the detector. Please use with caution.
-
-    3.  Update Detector Server (no tftp)
-        Commandline: updatedetectorserver, API: updateDetectorServer
-        Updates the detector server without using tftp. It also creates a 
-        symbolic link to a shorter name and reboots. The API using tftp
-        (copydetectorserver) is deprecated.
-
-    4.  Update Firmware and Server (no tftp)
-        Commandline: update (fewer arguments), API: updateFirmwareAndServer 
-        (overloaded) Same as before, except the server is transferred to the 
-        detector without tftp. The previous API and command (fewer arguments) 
-        using tftp is deprecated.
-
-    5.  Update mode in Detector server
-        Commandline: udpatemode, API set/getUpdateMode
-        One can set detector server to update mode (especially if server and 
-        firmware are incompatible that the server cannot start up without errors).
-        This mode will limit access to a few operations only needed to update the 
-        detector. Setting it will create an empty file (udpate.txt) and resetting
-        it will delete the empty file. Ofcourse, command line "--update" will 
-        overwrite any file detection and start server in update mode.
-
-    
-    Detector Server
-    ---------------
-
-    1.  [Gotthard2] speed
-        Ensuring dbitpipeline is default when changing speed. This has an effect
-        only if dbitpipeline was changed in between.
-
-
-
-2. Resolved Issues
+1. Resolved Issues
 ==================
 
     Detector Server
     ---------------
     
-    1.  [Jungfrau][Moench][Ctb] Programming Firmware Failures 
-        Firmware programming via software failures are fixed using a new kernel 
-        and corresponding changes in server software. Software works with both 
-        old and new kernels.
+    1.  [Jungfrau, Moench, Ctb] 
+        Programming Firmware
+        Updating kernel was not enough to ensure seamless programming of FPGA.
+        nCe signal now made high before programming blackfin.
 
-    2.  [Gotthard2][Mythen3]  
-        Verifies kernel version at server start up.
+        Updating the on-board detector server to this version is recommended 
+        before updating firmware for future releases.
 
-    3.  [Jungfrau]
-        Verifies HW2.0 before trying to set read n rows or flip rows.
-        Has no effect when not using slsReceiver.
+        Also removed the unnecessary test to check if it is allowed to update 
+        kernel or on-board detector server, depending on the current kernel 
+        version.
 
-    4.  [Eiger]
-        Thresholdnotb command loads threshold energy without trimbits, but had 
-        a bug in the server that was setting nchip to 0 and further trimval or 
-        trim commands would no work reliably. This is fixed now.
+    2.  [Eiger] locking for start and stop
+        Since the start and stop has a few commands within the server itself,
+        they are locked to ensure they dont disturb the other to have undefined
+        behavior.
+
+    3.  [Eiger] Quad Trimbits or threshold
+        Loading trimbits or setting threshold will throw an incorrect exception
+        for a quad as the left and right register values will not match. The fix 
+        only sets and monitors right fpga for chip trim signals in quad.
+
+    4.  [Eiger] Minor refactoring
+        Inconsistent reads between left and right register for read/write 
+        register commands now give clear error messages.
+
+        Fixed some minor functions returned empty error messages when failing.
 
 
     Client
     ------
 
-    1.  Receiver Id in the commands in config files were ignored. Fixed.
+    1.  [Eiger] Stop command freezes server 
+        It is apparent in large detectors.
 
-    2.  Execute command now also mentions which module failed.
+        For example, if module A got a "stop" during an acquisition, 
+        it stops to an 'Idle' state. If module B gets a "stop" before an 
+        acquisition, it will return it is in 'Idle' state and continue 
+        to start the next acquisition, but module B then waits for "ready
+        for trigger" synchronization from module A, which it will never get.
+        
+        Since module B missed the asynchronous stop command, the workaround
+        in the client is to send another "stop" command (upto 10 retries) 
+        till it returns Idle.
 
-    3.  [Jungfrau][Moench][Ctb] 
-        Programming firmware procedure did not delete temporary file created in 
-        6.0.0. Fixed.
+    2.  [Eiger][Jungfrau][Moench][Ctb]
+        Stop results in different frame numbers
+        A "stop" command will also now check for inconsistent 'nextframenumber' 
+        between the modules and set it to the max + 1 to ensure that they 
+        all start with the same frame number for the next acquisition.
 
 
-    Receiver
-    --------
 
-    1.  Setting receiver hostname to "none" threw an exception. Fixed.
+    Python
+    ------
 
-    2.  [Jungfrau]
-        Since the server verifies HW2.0 for number of rows before trying to set it, 
-        the receiver now does not show incorrect missing packets stemming from this 
-        issue.
+    1.  Conda package
+        Removed conda pkgs for python 3.6 and 3.7
+        Added conda pkgs for python 3.11
+
+    2.  Pybind11
+        Updated pybind11 from 2.6.2 to 2.10.11
+
+
+    Test
+    ----
+
+    1.  Updated catch to latest 2.x version due do build failure on fedora
+
+
+
+2.  On-board Detector Server Compatibility
+==========================================
+
+    Eiger       6.1.2
+    Jungfrau    6.1.2
+    Gotthard    6.1.0
+    Mythen3     6.1.0
+    Gotthard2   6.1.0
+    Moench      6.1.2
+    Ctb         6.1.2
+    
+    On-board Detector Server Upgrade
+    ================================
+    From v6.1.0 (without tftp):
+        Using command 'updatedetectorserver'
+    From 5.0.0 (with tftp):
+        Using command 'copydetectorserver'
+
+    Instructions available at
+        https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
 
 
 
 3. Firmware Requirements
 ========================
         
-    Eiger
-    =====  
-    Compatible version : 08.10.2021 (v29)
-    
-    Jungfrau
-    ========       
-    Compatible version : 31.08.2021 (v1.2, PCB v1.0) 
-                       : 08.10.2021 (v2.2, PCB v2.0)
+    Note: No change to 6.1.1.
 
-    Gotthard
-    ========   
-    Compatible version : 08.02.2018 (50um and 25um Master)
-                       : 09.02.2018 (25 um Slave) 
+    Eiger       08.10.2021 (v29)
+    Jungfrau    31.08.2021 (v1.2, PCB v1.0) 
+                08.10.2021 (v2.2, PCB v2.0)
+    Gotthard    08.02.2018 (50um and 25um Master)
+                09.02.2018 (25 um Slave) 
+    Mythen3     10.09.2021 (v1.1)
+    Gotthard2   27.05.2021 (v0.1)
+    Moench      05.10.2020 (v1.0)
+    Ctb         05.10.2020 (v1.0)
 
-    Mythen3
-    =======
-    Compatible version : 10.09.2021 (v1.1)
-
-    Gotthard2
-    =========
-    Compatible version : 27.05.2021 (v0.1)
-
-    Moench
-    ======
-    Compatible version : 05.10.2020 (v1.0)
-
-    Ctb
-    ===
-    Compatible version : 05.10.2020 (v1.0)
-
-    Detector Upgrade
-    ================
+    Detector Firmware Upgrade
+    =========================
     The following can be upgraded remotely:
     Eiger      via bit files
-    Jungfrau   via command <.pof>
-    Mythen3    via command <.rbf>
-    Gotthard2  via command <.rbf> 
-    Moench     via command <.pof>
-    Ctb        via command <.pof>
+    Jungfrau   via 'programfpga' command <.pof>
+    Mythen3    via 'programfpga' command <.rbf>
+    Gotthard2  via 'programfpga' command <.rbf> 
+    Moench     via 'programfpga' command <.pof>
+    Ctb        via 'programfpga' command <.pof>
 
     The following cannot be upgraded remotely:
     Gotthard   
 
     Instructions available at
         https://slsdetectorgroup.github.io/devdoc/firmware.html
-    and
-        https://slsdetectorgroup.github.io/devdoc/serverupgrade.html
 
 
 
 4. Kernel Requirements
 ======================
 
+    Note: No change to 6.1.1.
+
+
     Blackfin 
     ========
     Latest version: Fri Oct 29 00:00:00 2021

conda-recepie/build.sh

@@ -21,4 +21,4 @@ echo "Building using: ${NCORES} cores"
 cmake --build . -- -j${NCORES}
 cmake --build . --target install
 
-CTEST_OUTPUT_ON_FAILURE=1 ctest -j 2
+CTEST_OUTPUT_ON_FAILURE=1 ctest -j 1

conda-recepie/conda_build_config.yaml

@@ -1,9 +1,8 @@
 python:
-    - 3.6
-    - 3.7
     - 3.8
     - 3.9
     - 3.10
+    - 3.11
     
 numpy: 
     - 1.17

serverBin/ctbDetectorServerv6.1.0

@@ -1 +0,0 @@
-../slsDetectorServers/ctbDetectorServer/bin/ctbDetectorServerv6.1.0

serverBin/ctbDetectorServerv6.1.2

@@ -0,0 +1 @@
+../slsDetectorServers/ctbDetectorServer/bin/ctbDetectorServerv6.1.2

serverBin/eigerDetectorServerv6.1.0

@@ -1 +0,0 @@
-../slsDetectorServers/eigerDetectorServer/bin/eigerDetectorServerv6.1.0

serverBin/eigerDetectorServerv6.1.2

@@ -0,0 +1 @@
+../slsDetectorServers/eigerDetectorServer/bin/eigerDetectorServerv6.1.2

serverBin/jungfrauDetectorServerv6.1.0

@@ -1 +0,0 @@
-../slsDetectorServers/jungfrauDetectorServer/bin/jungfrauDetectorServerv6.1.0

serverBin/jungfrauDetectorServerv6.1.2

@@ -0,0 +1 @@
+../slsDetectorServers/jungfrauDetectorServer/bin/jungfrauDetectorServerv6.1.2

serverBin/moenchDetectorServerv6.1.0

@@ -1 +0,0 @@
-../slsDetectorServers/moenchDetectorServer/bin/moenchDetectorServerv6.1.0

serverBin/moenchDetectorServerv6.1.2

@@ -0,0 +1 @@
+../slsDetectorServers/moenchDetectorServer/bin/moenchDetectorServerv6.1.2

slsDetectorServers/eigerDetectorServer/FebControl.c

@@ -715,7 +715,7 @@ int Feb_Control_ProcessingInProgress() {
     unsigned int regr = 0, regl = 0;
     // deactivated should return end of processing
     if (!Feb_Control_activated)
-        return IDLE;
+        return STATUS_IDLE;
 
     if (!Feb_Interface_ReadRegister(Feb_Control_rightAddress, FEB_REG_STATUS,
                                     &regr)) {
@@ -729,8 +729,9 @@ int Feb_Control_ProcessingInProgress() {
                        "processing status\n"));
         return STATUS_ERROR;
     }
+    LOG(logDEBUG1, ("regl:0x%x regr:0x%x\n", regl, regr));
     // processing done
-    if ((regr | regl) & FEB_REG_STATUS_ACQ_DONE_MSK) {
+    if (regr & regl & FEB_REG_STATUS_ACQ_DONE_MSK) {
         return STATUS_IDLE;
     }
     // processing running
@@ -1046,6 +1047,7 @@ int Feb_Control_StopAcquisition() {
         // wait for feb processing to be done
         int is_processing = Feb_Control_ProcessingInProgress();
         int check_error = 0;
+        int check_stuck = 0;
         while (is_processing != STATUS_IDLE) {
             usleep(500);
             is_processing = Feb_Control_ProcessingInProgress();
@@ -1057,12 +1059,28 @@ int Feb_Control_StopAcquisition() {
                     break;
                 check_error++;
             } // reset check_error for next time
-            else
+            else {
                 check_error = 0;
+            }
+
+            // check stuck only 2000 times (1s)
+            if (is_processing == STATUS_RUNNING) {
+                if (check_stuck == 2000) {
+                    LOG(logERROR, ("Unable to get feb processing done signal\n"));
+                    // at least it is idle
+                    if (Feb_Control_AcquisitionInProgress() == STATUS_IDLE) {
+                       return 1;
+                    }
+                    LOG(logERROR, ("Unable to get acquisition done signal\n"));
+                    return 0;
+                }
+                check_stuck++;
+            } // reset check_stuck for next time
+            else {
+                check_stuck = 0;
+            }
         }
         LOG(logINFO, ("Feb: Processing done (to stop acq)\n"));
-
-        return 0;
     }
     return 1;
 }
@@ -1544,7 +1562,9 @@ int Feb_Control_SetChipSignalsToTrimQuad(int enable) {
         LOG(logINFO, ("%s chip signals to trim quad\n",
                       enable ? "Enabling" : "Disabling"));
         unsigned int regval = 0;
-        if (!Feb_Control_ReadRegister(DAQ_REG_HRDWRE, &regval)) {
+        // right fpga only
+        uint32_t righOffset = DAQ_REG_HRDWRE + Feb_Control_rightAddress;
+        if (!Feb_Control_ReadRegister(righOffset, &regval)) {
             LOG(logERROR, ("Could not set chip signals to trim quad\n"));
             return 0;
         }
@@ -1554,7 +1574,7 @@ int Feb_Control_SetChipSignalsToTrimQuad(int enable) {
             regval &= ~(DAQ_REG_HRDWRE_PROGRAM_MSK | DAQ_REG_HRDWRE_M8_MSK);
         }
 
-        return Feb_Control_WriteRegister(DAQ_REG_HRDWRE, regval);
+        return Feb_Control_WriteRegister(righOffset, regval);
     }
     return 1;
 }
@@ -1587,19 +1607,19 @@ int Feb_Control_WriteRegister(uint32_t offset, uint32_t data) {
 
     int run[2] = {0, 0};
     // both registers
-    if (offset < 0x100) {
+    if (offset < Feb_Control_leftAddress) {
         run[0] = 1;
         run[1] = 1;
     }
     // right registers only
-    else if (offset >= 0x200) {
+    else if (offset >= Feb_Control_rightAddress) {
         run[0] = 1;
-        actualOffset = offset - 0x200;
+        actualOffset = offset - Feb_Control_rightAddress;
     }
     // left registers only
     else {
         run[1] = 1;
-        actualOffset = offset - 0x100;
+        actualOffset = offset - Feb_Control_leftAddress;
     }
 
     for (int iloop = 0; iloop < 2; ++iloop) {
@@ -1625,19 +1645,19 @@ int Feb_Control_ReadRegister(uint32_t offset, uint32_t *retval) {
     uint32_t value[2] = {0, 0};
     int run[2] = {0, 0};
     // both registers
-    if (offset < 0x100) {
+    if (offset < Feb_Control_leftAddress) {
         run[0] = 1;
         run[1] = 1;
     }
     // right registers only
-    else if (offset >= 0x200) {
+    else if (offset >= Feb_Control_rightAddress) {
         run[0] = 1;
-        actualOffset = offset - 0x200;
+        actualOffset = offset - Feb_Control_rightAddress;
     }
     // left registers only
     else {
         run[1] = 1;
-        actualOffset = offset - 0x100;
+        actualOffset = offset - Feb_Control_leftAddress;
     }
 
     for (int iloop = 0; iloop < 2; ++iloop) {
@@ -1658,11 +1678,11 @@ int Feb_Control_ReadRegister(uint32_t offset, uint32_t *retval) {
             }
         }
     }
-    // Inconsistent values
-    if (value[0] != value[1]) {
+    // Inconsistent values when reading both registers
+    if ((run[0] & run[1]) & (value[0] != value[1])) {
         LOG(logERROR,
-            ("Inconsistent values read from left 0x%x and right 0x%x\n",
-             value[0], value[1]));
+            ("Inconsistent values read from %s 0x%x and %s 0x%x\n",
+             side[0], value[0], side[1], value[1]));
         return 0;
     }
     return 1;

slsDetectorServers/eigerDetectorServer/slsDetectorFunctionList.c

@@ -1158,6 +1158,8 @@ int setModule(sls_detector_module myMod, char *mess) {
 
         // if quad, set M8 and PROGRAM manually
         if (!Feb_Control_SetChipSignalsToTrimQuad(1)) {
+            sprintf(mess, "Could not set module. Could not enable chip signals to set trimbits\n");
+            LOG(logERROR, (mess));           
             return FAIL;
         }
 
@@ -1170,6 +1172,8 @@ int setModule(sls_detector_module myMod, char *mess) {
 
             // if quad, reset M8 and PROGRAM manually
             if (!Feb_Control_SetChipSignalsToTrimQuad(0)) {
+                sprintf(mess, "Could not set module. Could not disable chip signals to set trimbits\n");
+                LOG(logERROR, (mess));           
                 return FAIL;
             }
 
@@ -1179,6 +1183,8 @@ int setModule(sls_detector_module myMod, char *mess) {
 
         // if quad, reset M8 and PROGRAM manually
         if (!Feb_Control_SetChipSignalsToTrimQuad(0)) {
+            sprintf(mess, "Could not set module. Could not disable chip signals to set trimbits\n");
+            LOG(logERROR, (mess));           
             return FAIL;
         }
 
@@ -2211,43 +2217,44 @@ int setTransmissionDelayRight(int value) {
 
 /* aquisition */
 
-int prepareAcquisition() {
-#ifndef VIRTUAL
-    sharedMemory_lockLocalLink();
-    LOG(logINFO, ("Going to prepare for acquisition with counter_bit:%d\n",
-                  Feb_Control_Get_Counter_Bit()));
-    Feb_Control_PrepareForAcquisition();
-    sharedMemory_unlockLocalLink();
-#endif
-    return OK;
-}
-
 int startStateMachine() {
+    sharedMemory_lockAcqFlag();
+
 #ifdef VIRTUAL
     // create udp socket
     if (createUDPSocket(0) != OK) {
+        sharedMemory_unlockAcqFlag();
         return FAIL;
     }
     if (createUDPSocket(1) != OK) {
+        sharedMemory_unlockAcqFlag();
         return FAIL;
     }
     LOG(logINFOBLUE, ("Starting State Machine\n"));
     if (sharedMemory_getStop() != 0) {
         LOG(logERROR, ("Cant start acquisition. "
                        "Stop server has not updated stop status to 0\n"));
+        sharedMemory_unlockAcqFlag();
         return FAIL;
     }
     sharedMemory_setStatus(RUNNING);
     if (pthread_create(&virtual_tid, NULL, &start_timer, NULL)) {
         LOG(logERROR, ("Could not start Virtual acquisition thread\n"));
         sharedMemory_setStatus(IDLE);
+        sharedMemory_unlockAcqFlag();
         return FAIL;
     }
     LOG(logINFO, ("Virtual Acquisition started\n"));
+    sharedMemory_unlockAcqFlag();
     return OK;
 #else
     sharedMemory_lockLocalLink();
-    LOG(logINFO, ("Acquisition started bit toggled\n"));
+
+    LOG(logINFO, ("Going to prepare for acquisition with counter_bit:%d\n",
+                  Feb_Control_Get_Counter_Bit()));
+    Feb_Control_PrepareForAcquisition();
+
+
     int ret = OK, prev_flag;
     // get the DAQ toggle bit
     prev_flag = Feb_Control_AcquisitionStartedBit();
@@ -2264,12 +2271,14 @@ int startStateMachine() {
             LOG(logERROR,
                 ("Acquisition did not LOG(logERROR ouble reading register\n"));
             sharedMemory_unlockLocalLink();
+            sharedMemory_unlockAcqFlag();
             return FAIL;
         }
+	usleep(100 * 1000);
         LOG(logINFOGREEN, ("Acquisition started\n"));
     }
     sharedMemory_unlockLocalLink();
-
+    sharedMemory_unlockAcqFlag();
     return ret;
 #endif
 }
@@ -2502,6 +2511,10 @@ void *start_timer(void *arg) {
 #endif
 
 int stopStateMachine() {
+    
+    // acq lock for seamless stop
+    sharedMemory_lockAcqFlag();
+
     LOG(logINFORED, ("Stopping state machine\n"));
     // if scan active, stop scan
     if (sharedMemory_getScanStatus() == RUNNING) {
@@ -2514,13 +2527,15 @@ int stopStateMachine() {
         usleep(500);
     sharedMemory_setStop(0);
     LOG(logINFO, ("Stopped State Machine\n"));
+    sharedMemory_unlockAcqFlag();
     return OK;
 #else
     sharedMemory_lockLocalLink();
     // sends last frames from fifo and wait for feb processing done
-    if ((Feb_Control_StopAcquisition() != STATUS_IDLE)) {
+    if (!Feb_Control_StopAcquisition()) {
         LOG(logERROR, ("failed to stop acquisition\n"));
         sharedMemory_unlockLocalLink();
+        sharedMemory_unlockAcqFlag();
         return FAIL;
     }
     sharedMemory_unlockLocalLink();
@@ -2531,6 +2546,7 @@ int stopStateMachine() {
         // wait for beb to send out all packets
         if (Beb_IsTransmitting(&isTransmitting, send_to_ten_gig, 1) == FAIL) {
             LOG(logERROR, ("failed to stop beb acquisition\n"));
+            sharedMemory_unlockAcqFlag();
             return FAIL;
         }
         if (isTransmitting) {
@@ -2545,6 +2561,7 @@ int stopStateMachine() {
     sharedMemory_unlockLocalLink();
     if (!Beb_StopAcquisition()) {
         LOG(logERROR, ("failed to stop acquisition\n"));
+        sharedMemory_unlockAcqFlag();
         return FAIL;
     }
 
@@ -2554,6 +2571,7 @@ int stopStateMachine() {
         Beb_SetNextFrameNumber(retval + 1);
     }
     LOG(logINFOBLUE, ("Stopping state machine complete\n\n"));
+    sharedMemory_unlockAcqFlag();
     return OK;
 #endif
 }
@@ -2637,7 +2655,8 @@ void readFrame(int *ret, char *mess) {
     sharedMemory_lockLocalLink();
     if (Feb_Control_WaitForFinishedFlag(5000, 1) == STATUS_ERROR) {
         sharedMemory_unlockLocalLink();
-        LOG(logERROR, ("Waiting for finished flag\n"));
+        strcpy(mess, "Could not wait for finished flag\n");
+        LOG(logERROR, (mess));
         *ret = FAIL;
         return;
     }
@@ -2653,6 +2672,7 @@ void readFrame(int *ret, char *mess) {
         sharedMemory_unlockLocalLink();
         if (i == STATUS_ERROR) {
             strcpy(mess, "Could not read feb processing done register\n");
+            LOG(logERROR, (mess));
             *ret = (int)FAIL;
             return;
         }
@@ -2664,6 +2684,7 @@ void readFrame(int *ret, char *mess) {
         // wait for beb to send out all packets
         if (Beb_IsTransmitting(&isTransmitting, send_to_ten_gig, 1) == FAIL) {
             strcpy(mess, "Could not read delay counters\n");
+            LOG(logERROR, (mess));
             *ret = (int)FAIL;
             return;
         }

slsDetectorServers/jungfrauDetectorServer/slsDetectorFunctionList.c

@@ -2646,6 +2646,7 @@ int stopStateMachine() {
 
     LOG(logINFO, ("Status Register: %08x\n", bus_r(STATUS_REG)));
 
+    usleep(100 * 1000);
     resetCore();
     return OK;
 }

slsDetectorServers/slsDetectorServer/include/programViaBlackfin.h

@@ -11,12 +11,11 @@
 #define BLACKFIN_DEFINED
 
 int defineGPIOpins(char *mess);
-int FPGAdontTouchFlash(char *mess);
-int FPGATouchFlash(char *mess);
+int FPGAdontTouchFlash(char *mess, int programming);
+int FPGATouchFlash(char *mess, int programming);
 int resetFPGA(char *mess);
 
 int emptyTempFolder(char *mess);
-int allowUpdate(char *mess, char *functionType);
 /**
  * deletes old file
  * verify memory available to copy

slsDetectorServers/slsDetectorServer/include/sharedMemory.h

@@ -25,4 +25,6 @@ int sharedMemory_getScanStop();
 #ifdef EIGERD
 void sharedMemory_lockLocalLink();
 void sharedMemory_unlockLocalLink();
+void sharedMemory_lockAcqFlag();
+void sharedMemory_unlockAcqFlag();
 #endif

slsDetectorServers/slsDetectorServer/include/slsDetectorFunctionList.h

@@ -600,9 +600,6 @@ int setTransmissionDelayRight(int value);
 #endif
 
 // aquisition
-#ifdef EIGERD
-int prepareAcquisition();
-#endif
 int startStateMachine();
 #ifdef VIRTUAL
 void *start_timer(void *arg);

slsDetectorServers/slsDetectorServer/src/programViaBlackfin.c

@@ -18,8 +18,11 @@
 #define CMD_GPIO9_DEFINE "echo 9 > /sys/class/gpio/export"
 #define CMD_GPIO3_DEFINE "echo 3 > /sys/class/gpio/export"
 
+// N config done
 #define CMD_GPIO7_EXIST "/sys/class/gpio/gpio7"
+// N Config
 #define CMD_GPIO9_EXIST "/sys/class/gpio/gpio9"
+// N CE (access to AS interface)
 #define CMD_GPIO3_EXIST "/sys/class/gpio/gpio3"
 
 #define CMD_GPIO9_DEFINE_OUT "echo out > /sys/class/gpio/gpio9/direction"
@@ -28,8 +31,11 @@
 #define CMD_GPIO9_DEFINE_IN "echo in > /sys/class/gpio/gpio9/direction"
 #define CMD_GPIO3_DEFINE_IN "echo in > /sys/class/gpio/gpio3/direction"
 
+// nConfig
 #define CMD_GPIO9_DONT_TOUCH_FLASH "echo 0 > /sys/class/gpio/gpio9/value"
-#define CMD_GPIO3_DONT_TOUCH_FLASH "echo 0 > /sys/class/gpio/gpio3/value"
+// nCE
+#define CMD_GPIO3_DONT_TOUCH_FLASH "echo 1 > /sys/class/gpio/gpio3/value"
+// CD
 #define CMD_FPGA_PICKED_STATUS  "cat /sys/class/gpio/gpio7/value"
 
 #define CMD_GET_FPGA_FLASH_DRIVE    "awk \'$4== \"\\\"bitfile(spi)\\\"\" {print $1}\' /proc/mtd"
@@ -65,7 +71,7 @@ int defineGPIOpins(char *mess) {
         if (FAIL == validateKernelVersion(KERNEL_DATE_VRSN_3GPIO)) {
             latestKernelVerified = 0;
             LOG(logWARNING,
-                ("Kernel too old to use gpio 3 pins. Update kernel to "
+                ("Kernel too old to use gpio3 (nCE). Update kernel to "
                  "guarantee error-free fpga programming. \n\tNot the end "
                  "of the world. Continuing with current kernel...\n"));
         } else {
@@ -78,35 +84,35 @@ int defineGPIOpins(char *mess) {
     if (access(CMD_GPIO7_EXIST, F_OK) != 0) {
         if (executeCommand(CMD_GPIO7_DEFINE, retvals, logDEBUG1) == FAIL) {
             snprintf(mess, MAX_STR_LENGTH,
-                     "Could not define gpio7 pins for fpga (%s)\n", retvals);
+                     "Could not define gpio7 (CD) for fpga (%s)\n", retvals);
             LOG(logERROR, (mess));
             return FAIL;
         }
-        LOG(logINFO, ("\tgpio7: defined\n"));
+        LOG(logINFO, ("\tgpio7 (CD): defined\n"));
     } else {
-        LOG(logINFO, ("\tgpio7: already defined\n"));
+        LOG(logINFO, ("\tgpio7 (CD): already defined\n"));
     }
 
     // define gpio7 direction
     if (executeCommand(CMD_GPIO7_DEFINE_IN, retvals, logDEBUG1) == FAIL) {
         snprintf(mess, MAX_STR_LENGTH,
-                 "Could not set gpio7 as input for fpga (%s)\n", retvals);
+                 "Could not set gpio7 (CD) as input for fpga (%s)\n", retvals);
         LOG(logERROR, (mess));
         return FAIL;
     }
-    LOG(logINFO, ("\tgpio7: setting intput\n"));
+    LOG(logINFO, ("\tgpio7 (CD): setting intput\n"));
 
     // define gpio9
     if (access(CMD_GPIO9_EXIST, F_OK) != 0) {
         if (executeCommand(CMD_GPIO9_DEFINE, retvals, logDEBUG1) == FAIL) {
             snprintf(mess, MAX_STR_LENGTH,
-                     "Could not define gpio9 pins for fpga (%s)\n", retvals);
+                     "Could not define gpio9 (nConfig) for fpga (%s)\n", retvals);
             LOG(logERROR, (mess));
             return FAIL;
         }
-        LOG(logINFO, ("\tgpio9: defined\n"));
+        LOG(logINFO, ("\tgpio9 (nConfig): defined\n"));
     } else {
-        LOG(logINFO, ("\tgpio9: already defined\n"));
+        LOG(logINFO, ("\tgpio9 (nConfig): already defined\n"));
     }
 
     // define gpio3 (not chip enable)
@@ -114,21 +120,21 @@ int defineGPIOpins(char *mess) {
         if (access(CMD_GPIO3_EXIST, F_OK) != 0) {
             if (executeCommand(CMD_GPIO3_DEFINE, retvals, logDEBUG1) == FAIL) {
                 snprintf(mess, MAX_STR_LENGTH,
-                         "Could not define gpio3 pins for fpga (%s)\n",
+                         "Could not define gpio3 (nCE) for fpga (%s)\n",
                          retvals);
                 LOG(logERROR, (mess));
                 return FAIL;
             }
-            LOG(logINFO, ("\tgpio3: defined\n"));
+            LOG(logINFO, ("\tgpio3 (nCE): defined\n"));
         } else {
-            LOG(logINFO, ("\tgpio3: already defined\n"));
+            LOG(logINFO, ("\tgpio3 (nCE): already defined\n"));
         }
     }
 
     return OK;
 }
 
-int FPGAdontTouchFlash(char *mess) {
+int FPGAdontTouchFlash(char *mess, int programming) {
 #ifdef VIRTUAL
     return OK;
 #endif
@@ -136,51 +142,51 @@ int FPGAdontTouchFlash(char *mess) {
     // define gpio9 as output
     if (executeCommand(CMD_GPIO9_DEFINE_OUT, retvals, logDEBUG1) == FAIL) {
         snprintf(mess, MAX_STR_LENGTH,
-                 "Could not set gpio9 as output for fpga (%s)\n", retvals);
+                 "Could not set gpio9 (nConfig) as output for fpga (%s)\n", retvals);
         LOG(logERROR, (mess));
         return FAIL;
     }
-    LOG(logINFO, ("\tgpio9: setting output\n"));
+    LOG(logINFO, ("\tgpio9 (nConfig): setting output\n"));
 
     // define gpio3 as output
-    if (latestKernelVerified == 1) {
+    if (programming && latestKernelVerified == 1) {
         if (executeCommand(CMD_GPIO3_DEFINE_OUT, retvals, logDEBUG1) == FAIL) {
             snprintf(mess, MAX_STR_LENGTH,
-                     "Could not set gpio3 as output for fpga (%s)\n", retvals);
+                     "Could not set gpio3 (nCE) as output for fpga (%s)\n", retvals);
             LOG(logERROR, (mess));
             return FAIL;
         }
-        LOG(logINFO, ("\tgpio3: setting output\n"));
+        LOG(logINFO, ("\tgpio3 (nCE): setting output\n"));
     }
 
     // tell FPGA to not: gpio9
     if (executeCommand(CMD_GPIO9_DONT_TOUCH_FLASH, retvals, logDEBUG1) ==
         FAIL) {
         snprintf(mess, MAX_STR_LENGTH,
-                 "Could not set gpio9 to not touch flash for fpga (%s)\n",
+                 "Could not set gpio9 (nConfig) to not touch flash for fpga (%s)\n",
                  retvals);
         LOG(logERROR, (mess));
         return FAIL;
     }
-    LOG(logINFO, ("\tgpio9: fpga dont touch flash\n"));
+    LOG(logINFO, ("\tgpio9 (nConfig): fpga dont touch flash (Low)\n"));
 
     // tell FPGA to not: gpio3
-    if (latestKernelVerified == 1) {
+    if (programming && latestKernelVerified == 1) {
         if (executeCommand(CMD_GPIO3_DONT_TOUCH_FLASH, retvals, logDEBUG1) ==
             FAIL) {
             snprintf(mess, MAX_STR_LENGTH,
-                     "Could not set gpio3 to not touch flash for fpga (%s)\n",
+                     "Could not set gpio3 (nCE) to not touch flash for fpga (%s)\n",
                      retvals);
             LOG(logERROR, (mess));
             return FAIL;
         }
-        LOG(logINFO, ("\tgpio3: fpga dont touch flash\n"));
+        LOG(logINFO, ("\tgpio3 (nCE): fpga dont touch flash (High)\n"));
     }
     // usleep(100*1000);
     return OK;
 }
 
-int FPGATouchFlash(char *mess) {
+int FPGATouchFlash(char *mess, int programming) {
 #ifdef VIRTUAL
     return OK;
 #endif
@@ -188,20 +194,20 @@ int FPGATouchFlash(char *mess) {
     // tell FPGA to touch flash to program itself
     if (executeCommand(CMD_GPIO9_DEFINE_IN, retvals, logDEBUG1) == FAIL) {
         snprintf(mess, MAX_STR_LENGTH,
-                 "Could not set gpio9 as input for fpga (%s)\n", retvals);
+                 "Could not set gpio9 (nConfig) as input for fpga (%s)\n", retvals);
         LOG(logERROR, (mess));
         return FAIL;
     }
-    LOG(logINFO, ("\tgpio9: setting input\n"));
+    LOG(logINFO, ("\tgpio9 (nConfig): setting input\n"));
 
-    if (latestKernelVerified == 1) {
+    if (programming && latestKernelVerified == 1) {
         if (executeCommand(CMD_GPIO3_DEFINE_IN, retvals, logDEBUG1) == FAIL) {
             snprintf(mess, MAX_STR_LENGTH,
-                     "Could not set gpio3 as input for fpga (%s)\n", retvals);
+                     "Could not set gpio3 (nCE) as input for fpga (%s)\n", retvals);
             LOG(logERROR, (mess));
             return FAIL;
         }
-        LOG(logINFO, ("\tgpio3: setting input\n"));
+        LOG(logINFO, ("\tgpio3 (nCE): setting input\n"));
     }
     return OK;
 }
@@ -211,10 +217,10 @@ int resetFPGA(char *mess) {
 #ifdef VIRTUAL
     return OK;
 #endif
-    if (FPGAdontTouchFlash(mess) == FAIL) {
+    if (FPGAdontTouchFlash(mess, 0) == FAIL) {
         return FAIL;
     }
-    if (FPGATouchFlash(mess) == FAIL) {
+    if (FPGATouchFlash(mess, 0) == FAIL) {
         return FAIL;
     }
     usleep(CTRL_SRVR_INIT_TIME_US);
@@ -248,41 +254,6 @@ int emptyTempFolder(char *mess) {
 #endif
 }
 
-int allowUpdate(char *mess, char *functionType) {
-    LOG(logINFO, ("\tVerifying %s allowed...\n", functionType));
-
-#ifdef VIRTUAL
-    return OK;
-#endif
-    char retvals[MAX_STR_LENGTH] = {0};
-    if (executeCommand(CMD_GET_AMD_FLASH, retvals, logDEBUG1) == FAIL) {
-        // no amd found
-        if (strstr(retvals, "No result") != NULL) {
-            LOG(logINFO, ("\tNot Amd Flash\n"));
-            return OK;
-        }
-        // could not figure out if amd
-        snprintf(
-            mess, MAX_STR_LENGTH,
-            "Could not update %s. (Could not figure out if Amd flash: %s)\n",
-            functionType, retvals);
-        LOG(logERROR, (mess));
-        return FAIL;
-    }
-    // amd, only current kernel works with amd flash
-    if (validateKernelVersion(KERNEL_DATE_VRSN_3GPIO) == FAIL) {
-        getKernelVersion(retvals);
-        snprintf(mess, MAX_STR_LENGTH,
-                 "Could not update %s. Kernel version %s is too old to "
-                 "update the Amd flash/ root directory. Most likely, blackfin needs rescue or replacement. Please contact us.\n",
-                 functionType, retvals);
-        LOG(logERROR, (mess));
-        return FAIL;
-    }
-    LOG(logINFO, ("\tAmd flash with compatible kernel version\n"));
-    return OK;
-}
-
 int preparetoCopyProgram(char *mess, char *functionType, FILE **fd,
                          uint64_t fsize) {
 
@@ -335,7 +306,7 @@ int eraseAndWriteToFlash(char *mess, enum PROGRAM_INDEX index,
     }
 
     if (index == PROGRAM_FPGA) {
-        if (FPGAdontTouchFlash(mess) == FAIL) {
+        if (FPGAdontTouchFlash(mess, 1) == FAIL) {
             return FAIL;
         }
     }
@@ -564,14 +535,14 @@ int writeToFlash(char *mess, ssize_t fsize, FILE *flashfd, FILE *srcfd) {
 
 int waitForFPGAtoTouchFlash(char *mess) {
     // touch and program
-    if (FPGATouchFlash(mess) == FAIL) {
+    if (FPGATouchFlash(mess, 1) == FAIL) {
         return FAIL;
     }
 
 #ifdef VIRTUAL
     return OK;
 #endif
-    LOG(logINFO, ("\tWaiting for FPGA to program from flash\n"));
+    LOG(logINFO, ("\tWaiting for FPGA to program from flash... \n\t[gpio7 (CD) should be High when done]\n"));
     int timeSpent = 0;
 
     int result = 0;
@@ -609,8 +580,8 @@ int waitForFPGAtoTouchFlash(char *mess) {
             LOG(logERROR, (mess));
             return FAIL;
         }
-        LOG(logDEBUG1, ("gpi07 returned %d\n", result));
+        LOG(logDEBUG1, ("gpi07 (CD)returned %d\n", result));
     }
-    LOG(logINFO, ("\tFPGA has picked up the program from flash\n"));
+    LOG(logINFO, ("\tFPGA has picked up the program from flash. gpio7 (CD) is High\n"));
     return OK;
 }

slsDetectorServers/slsDetectorServer/src/sharedMemory.c

@@ -20,6 +20,7 @@ typedef struct Memory {
     pthread_mutex_t lockStatus;
 #ifdef EIGERD
     pthread_mutex_t lockLocalLink;
+    pthread_mutex_t lockAcqFlag;
 #endif
     enum runStatus scanStatus; // idle, running or error
     int scanStop;
@@ -120,6 +121,7 @@ int sharedMemory_initialize() {
 #endif
 
 #ifdef EIGERD
+    // local link mutex
     pthread_mutexattr_t lockLocalLinkAttribute;
     if (pthread_mutexattr_init(&lockLocalLinkAttribute) != 0) {
         LOG(logERROR,
@@ -141,6 +143,28 @@ int sharedMemory_initialize() {
                        "shared memory\n"));
         return FAIL;
     }
+    // acq flag mutex
+    pthread_mutexattr_t lockAcqFlagAttribute;
+    if (pthread_mutexattr_init(&lockAcqFlagAttribute) != 0) {
+        LOG(logERROR,
+            ("Failed to initialize mutex attribute for lockAcqFlag for "
+             "shared memory\n"));
+        return FAIL;
+    }
+
+    if (pthread_mutexattr_setpshared(&lockAcqFlagAttribute,
+                                     PTHREAD_PROCESS_SHARED) != 0) {
+        LOG(logERROR, ("Failed to set attribute property to process shared for "
+                       "lockAcqFlag for shared memory\n"));
+        return FAIL;
+    }
+
+    if (pthread_mutex_init(&(shm->lockAcqFlag), &lockAcqFlagAttribute) !=
+        0) {
+        LOG(logERROR, ("Failed to initialize pthread_mutex_t lockAcqFlag for "
+                       "shared memory\n"));
+        return FAIL;
+    }
 #endif
     shm->scanStatus = IDLE;
     shm->scanStop = 0;
@@ -266,4 +290,10 @@ void sharedMemory_lockLocalLink() { pthread_mutex_lock(&(shm->lockLocalLink)); }
 void sharedMemory_unlockLocalLink() {
     pthread_mutex_unlock(&(shm->lockLocalLink));
 }
+
+void sharedMemory_lockAcqFlag() { pthread_mutex_lock(&(shm->lockAcqFlag)); }
+
+void sharedMemory_unlockAcqFlag() {
+    pthread_mutex_unlock(&(shm->lockAcqFlag));
+}
 #endif

slsDetectorServers/slsDetectorServer/src/slsDetectorServer_funcs.c

@@ -1499,7 +1499,7 @@ int write_register(int file_des) {
         } else {
             if (readRegister(addr, &retval) == FAIL) {
                 ret = FAIL;
-                sprintf(mess, "Could not read register 0x%x.\n", addr);
+                sprintf(mess, "Could not read register 0x%x or inconsistent values. Try to read +0x100 for only left and +0x200 for only right.\n", addr);
                 LOG(logERROR, (mess));
             }
         }
@@ -1537,7 +1537,7 @@ int read_register(int file_des) {
 #elif EIGERD
     if (readRegister(addr, &retval) == FAIL) {
         ret = FAIL;
-        sprintf(mess, "Could not read register 0x%x.\n", addr);
+        sprintf(mess, "Could not read register 0x%x or inconsistent values. Try +0x100 for only left and +0x200 for only right..\n", addr);
         LOG(logERROR, (mess));
     }
 #else
@@ -1909,9 +1909,6 @@ void *start_state_machine(void *arg) {
             }
             usleep(scanSettleTime_ns / 1000);
         }
-#ifdef EIGERD
-        prepareAcquisition();
-#endif
         ret = startStateMachine();
         LOG(logDEBUG2, ("Starting Acquisition ret: %d\n", ret));
         if (ret == FAIL) {
@@ -2984,6 +2981,10 @@ int validateAndSetAllTrimbits(int arg) {
             LOG(logERROR, (mess));
         } else {
             ret = setAllTrimbits(arg);
+            if (ret == FAIL) {
+                strcpy(mess, "Could not set all trimbits\n");
+                LOG(logERROR, (mess));
+            }
 #ifdef EIGERD
             // changes settings to undefined
             if (getSettings() != UNDEFINED) {
@@ -4143,28 +4144,21 @@ int copy_detector_server(int file_des) {
         LOG(logINFOBLUE, ("Copying server %s from host %s\n", sname, hostname));
         char cmd[MAX_STR_LENGTH] = {0};
 
-#ifdef BLACKFIN_DEFINED
-        // check update is allowed  (Non Amd OR AMD + current kernel)
-        ret = allowUpdate(mess, "copy detector server");
-#endif
-
         // tftp server
-        if (ret == OK) {
-            if (snprintf(cmd, MAX_STR_LENGTH, "tftp %s -r %s -g", hostname,
-                         sname) >= MAX_STR_LENGTH) {
-                ret = FAIL;
-                strcpy(mess, "Could not copy detector server. Command to copy "
-                             "server too long\n");
-                LOG(logERROR, (mess));
-            } else if (executeCommand(cmd, retvals, logDEBUG1) == FAIL) {
-                ret = FAIL;
-                snprintf(mess, MAX_STR_LENGTH,
-                         "Could not copy detector server (tftp). %s\n",
-                         retvals);
-                // LOG(logERROR, (mess)); already printed in executecommand
-            } else {
-                LOG(logINFO, ("\tServer copied\n"));
-            }
+        if (snprintf(cmd, MAX_STR_LENGTH, "tftp %s -r %s -g", hostname,
+                        sname) >= MAX_STR_LENGTH) {
+            ret = FAIL;
+            strcpy(mess, "Could not copy detector server. Command to copy "
+                            "server too long\n");
+            LOG(logERROR, (mess));
+        } else if (executeCommand(cmd, retvals, logDEBUG1) == FAIL) {
+            ret = FAIL;
+            snprintf(mess, MAX_STR_LENGTH,
+                        "Could not copy detector server (tftp). %s\n",
+                        retvals);
+            // LOG(logERROR, (mess)); already printed in executecommand
+        } else {
+            LOG(logINFO, ("\tServer copied\n"));
         }
 
         if (ret == OK) {
@@ -9403,16 +9397,6 @@ void receive_program_via_blackfin(int file_des, enum PROGRAM_INDEX index,
             functionType);
     LOG(logERROR, (mess));
 #else
-    // only when writing to kernel flash or root directory
-    if (index != PROGRAM_FPGA) {
-        // check update is allowed  (Non Amd OR AMD + current kernel)
-        ret = allowUpdate(mess, functionType);
-        if (ret == FAIL) {
-            Server_SendResult(file_des, INT32, NULL, 0);
-            return;
-        }
-    }
-
     // open file and allocate memory for part program
     FILE *fd = NULL;
     ret = preparetoCopyProgram(mess, functionType, &fd, filesize);
@@ -9632,25 +9616,18 @@ int set_update_mode(int file_des) {
         return printSocketReadError();
     LOG(logDEBUG1, ("Setting update mode to \n", arg));
 
-#ifdef BLACKFIN_DEFINED
-    // check update is allowed  (Non Amd OR AMD + current kernel)
-    ret = allowUpdate(mess, "set/unset update mode");
-#endif
-
-    if (ret == OK) {
-        switch (arg) {
-        case 0:
-            ret = deleteFile(mess, UPDATE_FILE, "unset update mode");
-            break;
-        case 1:
-            ret = createEmptyFile(mess, UPDATE_FILE, "set update mode");
-            break;
-        default:
-            ret = FAIL;
-            sprintf(mess, "Could not set updatemode. Options: 0 or 1\n");
-            LOG(logERROR, (mess));
-            break;
-        }
+    switch (arg) {
+    case 0:
+        ret = deleteFile(mess, UPDATE_FILE, "unset update mode");
+        break;
+    case 1:
+        ret = createEmptyFile(mess, UPDATE_FILE, "set update mode");
+        break;
+    default:
+        ret = FAIL;
+        sprintf(mess, "Could not set updatemode. Options: 0 or 1\n");
+        LOG(logERROR, (mess));
+        break;
     }
 
     return Server_SendResult(file_des, INT32, NULL, 0);

slsDetectorSoftware/src/Detector.cpp

@@ -780,7 +780,39 @@ void Detector::startDetectorReadout() {
 }
 
 void Detector::stopDetector(Positions pos) {
-    pimpl->Parallel(&Module::stopAcquisition, pos);
+
+    // stop and check status X times
+    int retries{0};
+    //avoid default construction of runStatus::IDLE on squash
+    auto status = getDetectorStatus().squash(defs::runStatus::RUNNING); 
+    while(status != defs::runStatus::IDLE){
+        pimpl->Parallel(&Module::stopAcquisition, pos);
+        status = getDetectorStatus().squash(defs::runStatus::RUNNING);
+        ++retries;
+
+        if(retries == 10)
+            throw RuntimeError("Could not stop detector");
+    }
+        
+
+    // validate consistent frame numbers
+    switch (getDetectorType().squash()) {
+    case defs::EIGER:
+    case defs::JUNGFRAU:
+    case defs::MOENCH:
+    case defs::CHIPTESTBOARD: {
+        auto res = getNextFrameNumber(pos);
+        if (!res.equal()) {
+            uint64_t maxVal = 0;
+            for (auto it : res) {
+                maxVal = std::max(maxVal, it);
+            }
+            setNextFrameNumber(maxVal + 1);
+        }
+    } break;
+    default:
+        break;
+    }
 }
 
 Result<defs::runStatus> Detector::getDetectorStatus(Positions pos) const {

slsSupportLib/include/sls/versionAPI.h

@@ -1,15 +1,15 @@
 // SPDX-License-Identifier: LGPL-3.0-or-other
 // Copyright (C) 2021 Contributors to the SLS Detector Package
 /** API versions */
-#define GITBRANCH "6.1.0"
+#define GITBRANCH "6.1.2"
 
-#define APILIB 0x211125
-#define APIRECEIVER 0x211125
-#define APIGUI 0x211125
 #define APICTB 0x211125
 #define APIGOTTHARD 0x211125
 #define APIGOTTHARD2 0x211125
-#define APIJUNGFRAU 0x211125
 #define APIMYTHEN3 0x211125
 #define APIMOENCH 0x211124
+#define APIJUNGFRAU 0x220104
+#define APILIB 0x221125
+#define APIRECEIVER 0x211125
+#define APIGUI 0x211125
 #define APIEIGER 0x211125