* fix the file path resetting issue of GUI in the case where different modules have different fpath setting.
* fix stack-buffer-overflow issue when using HDF5 HDF5DataFile::parameterDataTypes have 64bit type (i.e. STD_U64LE), the size of fill_value should be at least 8 bytes.
* change the type of fill_value to uint64_t
Co-authored-by: Z.H. Li <zhenghenge@gmail.com>
* moench (feature to wait for post processing to be done in new sls_detector_acquire_zmq executable)
READOUT_ACTION_ZMQ added to action enums
sls_detector_acquire_zmq added to executables
empty data call back so that client listens to last dummy zmq packet from moench post processor
processor: remove NEWZMQ ifdefs and remove connect for zmq publisher socket
* fix to compile
* cmds generated and parsed
* changed common.c readADCFromFile to make it more general and move temperature calculation for Eiger out of this function and inside whereever it is called.
* g2 and m2: gethighvoltage was just a variable set in server, it is now moved to a get inside DAC5671 implementation (but not reading a measured value, instead what is set from a file), high voltage variable used inside DAC5671 for virtual servers
* g2: switching off hv (ifrom non zero to zero value) will wait for 10s; powering on chip reconfigures chip; powering off chip unconfigures chip; powering off chip also includes check if hv = 0, if not throw exception; chip configuration checked before acquring; at start up: hv switched off and chip powered on, so does not wait 10s to switch off hv;
* included test to check powering off chip when hv is on should throw an exception
* g2: check if chip configured before acquiring
* nios: read hv value set from file and virtual still goes into DAC5671 for conversions to and fro dac to V, change common readadc to readparameter to generalize, make sethighvoltage into a get and set to catch errors in get as well, g2: if not at startup, remmeber hv value before setting it and after check if value was being switched off (from a non zero value) and wait 10s if it was (10s wait only for switching off from non zero and not at startup)
* m3: clk 0 changed from 10 to 20 (100MHz to 50MHz)
* g2: startup clk div back to 10 as in firmware but setting in software startup to 20
* m3: minor print error if clk divider > max
* client: stopping a blocking acquire of multi modules checks status to catch slaves that might still be in waiting. Problem is (gotthard2 25um at least) slave is in waiting only temporarily before going go idle/stopped. So a 50ms sleep is necessary ot not throw an unnecessary error
* client: when stopping blocking acquire, wait up to 1s in 50ms increments for slave to stop waiting temporarily
* period and exptime(patternwaittime level 0)
* added new regsieterdefs and updated api version and fixedpattern reg
* autogenerate commands
* formatting
* minor
* wip resetflow, readout mode, transceiver mask, transceiver enable
* acquisition, but streaming done bit and busy (exposing + read chip to fifo) not known yet from fw
* programming fpga and device tree done
* most configuration done, need to connect configuretransceiver to client
* stuck at resetting transciever timed out
* minor
* fixed virtual, added chip busyto fifo, streaming busy, set/getnext framenumber
* configuretransceiver from client, added help in client
* make formatt and command generation
* tests for xilinx ctb works
* command generation
* dacs added and tested, power not done
* power added
* added temp_fpga
* binaries in
* ctrlreg is 0 to enable chip=fixed, high dac val = min val= fixed, power regulators in weird order=fixed, device tree could be loaded with dacs before adcs=fixed
* start works
* virtual server sends
* receiver works
* tests
* python function and enum generation, commands generatorn and autocomplete, formatting, tests
* tests fail at start(transceiver not aligned)
* tests passed
* all binaries compiled
* eiger binary in
* added --nomodule cehck for xilinx
* Protect from getenv("HOME") returning nullptr (e.g., in case running in systemd)
* Write proper warning in Module.cpp
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
* new rct structure for moench03
* new moench data structure for offline processing
* meonch raw data and zmq process files updated to 7.0.3 version
* implemented config file for Zmq file
* raw data and zmq work with config file, but only with one file/interface
* zmq config change
* added config examples for zmq and rawdata
* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* connected kernelversion, hardwareversion, versions, framesl, triggersl, dr, timingmode, pattern (except patioctrl) thats there for altera ctb
* replaced set/get64Bit to set/getU64bit in all loadpattern.c for (ctb and m3 also)
* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* allowing tests for xilinx
* binaries in
* updated registers, arm64
* compiler set to aarch64 for xilinx server
* updated RegisterDefs.h
* merge into generate branch and resolving conflicts and adding the xilinx changes to callerspecial and commands.yaml
* compiles and can print firmware version (using a different csp0 address)
* fixing other servers (gotthard, jungfrau, moench, mythen3) that it returns in case of mapping failure, xilinxctb: added that it checks type, prints proper fw version, checks kernel date, added armprocessor define to use in common places, added specifiers to supress overflow and truncation warnings
* added detector ip and mac adddress to the printout
* fixed tests and recompiled servers
* replacing detp with sls_Detector_put and detg with sls_detector_get
* sls_detector_not implemented, but extended message to ask user to use sls_detector_get or sls_detector_put
* autocompletion also for sls_detector or det
* commands code generation (#803)
* commands code generation for only frames command
* fix cmake file and add Caller files
* working exptime, fully extended commands file and its variants
* start adding template commands
* add INT_CMD_VEC_ID template
* add list command, generate multiple bins, format code
* reach 208 commands using the cpp macros
* add tests for command parser
* start adding tests for commands parser
* fix typo to use commands.yaml
* add more tests for command_parser
* add all template functions (up to 218 commands)
* finish template functions and add more CmdProxy.cpp functions (250+)
* 257 commands
* 300 commands the rest are very special commands
* add special commands without generation
* separate special functions from generated c++ file
* implementing one command for put and get (buggy)
* add infer action in a separate file
* generate header for special commands from yaml
* allow only 0 or 1 for bool inputs
* group all commands in gen_commands.py
* add help to gen_commands.py
* add autocomplete bash script
* autocompletion: add support for module levels and help
* remove debugging line
* add autocompletion, help to commands, change int [0,1] to bool
* copy tests for Caller.cpp. Tests pass
* update with the new developer branch changes
* fix errors after merging (there is problems with tests)
* fixed port/stopport in yaml (intput typo), added '_caller' to the test dac and test on chip dac command in global test for cmdcaller
* undo previous test simulator debug change
* add documentation for the generated code
* reducing the comment to be replaced in length so formatting does not split into 2 lines
* removed formatting specific style of C++11 in gen_commands.py to keep with the top level clang format of the project
* regeneratign code for commands
* automation generated
* Redirect deprecated commands (#872)
* working implementation, need to fix dac
* fixed deprecation redirect for dac command
* Detector specific autocomplete (#873)
* working implementation, need to fix dac
* fixed deprecation redirect for dac command
* detector specific completion for dac
* added autocomplete using detector specific
* fixed error when autocompleting partial words
* Generate commands/fix commands (#875)
* fix vm_a, im_a etc have deg Celsius suffix, also help missing or changed in some places
* dac: require det id for all, arg0 to be printed at output, help for onchip dac and dac, onchipdac: spacing
* getscan detid and blocking trigger help
* udp_Dstlist det_id fixed, but rx_id invalid
* cmdApp in line with cmdLineApp (missing version, receiver_id, not creating det object in help action
* added set_command to differentiate between check_det_id and require_det_id (mixed up), args: -1 needs to check for at least one argument
* reordering
* reordering and checked till integer_command_hex
* fixed a lot more commands
* fix caller tests for eiger
* changes to tests after Bechir left
* changing .cmd to .cmdcall for the caller commands
* fixed tests for caller, still warning for setexptime about cast input
* autocomplete ran
* add moench test
* regenerating autocomplete and commands
* fixing other things from merge conflicts (renaming slsDetectorDefs to defs in commands.yaml)
* formatting
* added code injection to help (#876)
* updated 3 commands to have get output that can be put into put (#877)
* updated some commands to have get output that can be put into put
* fix tests for clkdiv
* adding help to free (#878)
* removing old commands and renaming them, (also making it work for parameters command as it was still calling cmdproxy) (#879)
* More helpful error messages for unsupported actions (#880)
* removing old commands and renaming them, (also making it work for parameters command as it was still calling cmdproxy)
* Added specific help for unsupported actions
* fixed a vetofile get special exception message. more specific warning for special exception message instead of no function warning
* added condition checking true in exceptions for special message
---------
Co-authored-by: Bechir Brahem <bachbrahem@gmail.com>
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* if blocking and handling sync, only master gets blocking acq, slaves get non blocking as they are first and so dont get status or error caught when slaves dont get trigger (due to not connected etc) and acq returns with slaves still in waiting status. so check status of all in blocking acq
* for all dets with sync, ensure atleast one master when starting acq
* docs updated about sync
* draft to fix virtual test when it fails
* catching errors in tests and removing sigchild ignore so servers (process in background) executing commands will not fail (pclose no child processes, if sigchld is ignored) fixed
* uncommented python loading config
* somehow killal slsReciever in second detector test fails even though no receiver running
* fixing script for virtual simlator test:fixed issue with check if process running, fixed moench tests
* fix acquisition finished status to have different status for different modules, but does not have to be error. for eg. jf sync fw (2.4.1 gives idle for master and stopped for slaves when stopping acquiistion)
* jf: if bit 14 in reg 0x5d (electron mode collection bit) is changed, configure chip if v1.1 and powered on. so touch writeregister (setbit/clearbit also calls write register in the end). replace when electroncollectionmode command introduced
* jf: rewrite of status reg bits, waiting state includes both wati for trigger and start frame, blocking trigger only waits if its not in waiting for trigger and run busy enabled, error state connected in firmware
