- changed
- command from `datastream` to `udp_datastream` to be more specific
- Detector API:
- setNumberofUDPInterfaces(pos) =>setNumberofUDPInterfaces() # no position anymore
- getDataStream(portPosition, pos) =>getUDPDataStream(portPosition, pos)
- setDataStream(portPosition, pos) => setUDPDataStream(portPosition) # no position anymore
- modified the dataprocessing thread:
- if gui or call back, start zmq processing (connecting sockets) before starting receiver (disabled ports sends dummy that the client zmq sockets are not ready for)
- if only progress, starting progress processing thread after startReceiver
-
- added
- Detector API:
- getRxDisabledUDPPortIndices()
- getPortPositionList()
- allow disabling/enabling udp interface in receiver for Jungfrua/Moench when both udp interfaces is enabled (This is to go fast, where only one half of the module matters)
- write ports type and disabled ports to master file (tests for it as well)
- tests for python commands as well
- datastream command to deprecated commands
- refactored tests to make the new parameters fit
* first draft of disabling data port at the receiver side. Todo: master file and stream for gui to use
* updated help in command
* formatting
* md5 unchanged
* fix test, check port position for detector type
* wip, udp port enable metadata in client, to:receiver, zmq streaming
* wip, master attributes
* wip, imple=> save only disabled ports with port index, 1 interface, is empty
* works in file. still needs refactoring
* updated writer versions
* udp ports type pass, disabled with api yet
* fixed disabled ports meta data as well
* fixed in developer via other PR
* renamed.more intuitive
* fix in gui that wont wait for disabled ports
* added tests for master file
* extra tests
* move the master fiel tests into its own tests with the disable marker for github tests
* refactoring
* python test
* more intuitive and doc
* release notes
* example for python
* back to before
* minor documentation fix and sending nports unnecessarily for getRxUDPPortDisableMetadata
* doc
* review fixes, 1. using std::array instead of vector, 2. moving udp_datastream command testing with different values into master attributes testing file because we test the master file
* minor
* review: update help
* progress printed before assigned
* try catch inside hdf5
* auto generated code for CLI and formatting
* missing packets should not be checked at github workflow level
* formatting
* improved python doc for udp_datastream help
* indent doc python done
* slsSupportLib done, at receiver rooting out in implementation
* removed from receiver and client
* removed everywhere except gui, python and client(commands.yaml and Detector.h)
* updated python
* fixed autocomplete to print what the issue is if there is one with ToString when running the autocomplete script to generate fixed.json. updated readme.md in generator folder
* formatting
* removed enums for dacs
* udpating autocomplete and generating commands
* removed gotthard from docs and release notes
* removed dac test
* bug from removing g1
* fixed virtual test for xilinx, was minor. so in this PR
* gui done
* binary in merge fix
* formatting and removing enums
* updated fixed and dump.json
* bash autocomplete
* updated doc on command line generation
* removing increments in dac enums for backward compatibility. Not required
* removed ROI from rxParameters (only in g1), not needed to be backward compatible
* removed the phase shift option from det server staruip
* changed rxr callback signatures to all include structs
* removed datamodify call back as size can be changed in the original data call back now
* bringing some parameters (set functions) to dataProcessor class for its callback (namely udpport, quad, fliprows, totalframes, jsonheader), resulting in also removing totalframes from 2 other function signatures
* updated MultiReceiverApp to reflect the new callback signatures
* period and exptime(patternwaittime level 0)
* added new regsieterdefs and updated api version and fixedpattern reg
* autogenerate commands
* formatting
* minor
* wip resetflow, readout mode, transceiver mask, transceiver enable
* acquisition, but streaming done bit and busy (exposing + read chip to fifo) not known yet from fw
* programming fpga and device tree done
* most configuration done, need to connect configuretransceiver to client
* stuck at resetting transciever timed out
* minor
* fixed virtual, added chip busyto fifo, streaming busy, set/getnext framenumber
* configuretransceiver from client, added help in client
* make formatt and command generation
* tests for xilinx ctb works
* command generation
* dacs added and tested, power not done
* power added
* added temp_fpga
* binaries in
* ctrlreg is 0 to enable chip=fixed, high dac val = min val= fixed, power regulators in weird order=fixed, device tree could be loaded with dacs before adcs=fixed
* start works
* virtual server sends
* receiver works
* tests
* python function and enum generation, commands generatorn and autocomplete, formatting, tests
* tests fail at start(transceiver not aligned)
* tests passed
* all binaries compiled
* eiger binary in
* added --nomodule cehck for xilinx
* transceiverenable, tsamples, romode for tranceiver and digital_transceiver
* 202 spec instr only for transceiver mode
* removed check for empty in trans readout and clean memory before reading from fifo
* ctb read fifo strobe for all after reading all channels, adding 1us after selecting channel, changing fw date
* updated 10gb transceiver enable
----
* added transceiver (tsamples, romode(transceiver, digital_transceiver), transceiverenable (mask)
* clean memory before reading from fifo (for analog and digital as well)
* read fifo then read strobe (also corresp fw) fixes number of reads (also for analg and digital)-> increases all pipelines by 1
* fixed bug in rearranging digital data in receiver
* fixed bug in streaming size of data after rearranging
* fixed bug in setbit, clearbit,and getbit
* status checks fifo before returning idle (transmitting if data in fifo if transceiver more enabled)
* soem matterhorn specifics that will need to be put into pattern in a month or two. this is temporary.
* NOTE: breaking api. rxParameters struct has transceiverenabel and tsamples given from det to receiver
* copied jungfrau server to moench and adapted
* fixed image size and num packets
* read n rows allows 16
* commneted out configure_asic_timer at server startup. To be removed later the ASIC_CTRL_REG and storage cell options
* moench:removing the decrement (which was in jf) in read n rows to register
* removed lblsamples from gui
* gui message doesnt show if it has a '>' symbol in error msg
* minor refactoring for readability (size_t calc fifo size)
* refactoring listening udp socket code: activated and datastream dont create udp sockets anyway, rc<=- should be discarded in any case
* wip
* refactoring memory structure access
* wip: bugfix write header + data to binary
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* portRoi no roi effecto on progress
* fail at receiver progress, wip
* segfaults for char pointer in struct
* reference to header to get header and data
* refactoring
* use const defined for size of header of fifo
* updated release notes
* remove pointer in callback for sls_receiver_header pointer
* rx same name arguments in constructors
* rx: same name arguments in constructor
* rx: removing the '_' suffix in class data members
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* diff undo for clang later
* wip
* Wip
* const string&
* gui message doesnt show if it has a '>' symbol in error msg
* minor refactoring for readability (size_t calc fifo size)
* refactoring listening udp socket code: activated and datastream dont create udp sockets anyway, rc<=- should be discarded in any case
* wip
* refactoring memory structure access
* wip: bugfix write header + data to binary
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* portRoi no roi effecto on progress
* fail at receiver progress, wip
* segfaults for char pointer in struct
* reference to header to get header and data
* refactoring
* use const defined for size of header of fifo
* updated release notes
* remove pointer in callback for sls_receiver_header pointer
* rx same name arguments in constructors
* rx: same name arguments in constructor
* rx: removing the '_' suffix in class data members
* merge fix
* merge fix
* review fix refactoring
* gui message doesnt show if it has a '>' symbol in error msg
* minor refactoring for readability (size_t calc fifo size)
* refactoring listening udp socket code: activated and datastream dont create udp sockets anyway, rc<=- should be discarded in any case
* wip
* refactoring memory structure access
* wip: bugfix write header + data to binary
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* portRoi no roi effecto on progress
* fail at receiver progress, wip
* segfaults for char pointer in struct
* reference to header to get header and data
* refactoring
* use const defined for size of header of fifo
* updated release notes
* remove pointer in callback for sls_receiver_header pointer
* passing reference header for callback instead of copying it
maliakal_d
mazzol_a
mazzol_a