|
|
14d227f8db
|
jungfrau server fix (3.1.3): delay after trigger set at testbus
|
2018-06-28 16:19:19 +02:00 |
|
|
|
d76568d6d9
|
jungfrau server, merge fix binaries
|
2018-06-28 08:55:14 +02:00 |
|
|
|
2dece5c635
|
jungfrau server: reading power status (fixed in firmware)
|
2018-06-06 16:15:30 +02:00 |
|
|
|
24db58e615
|
jungfrau server required firmware version on server changed from 0x2018 to 0x18
|
2018-06-06 10:23:06 +02:00 |
|
|
|
cf8b0de433
|
slsReceiver, slsDetector, eiger and jungfrau server: client checks firmware and software an dreceiver compatibility for each time shared memory is cleaned up
|
2018-05-28 19:11:34 +02:00 |
|
|
|
4d4e4a4ce7
|
first draft of versioning of client
|
2018-05-24 16:58:07 +02:00 |
|
|
|
c5262458d5
|
eiger and jungfrau server, updated virtual versions with start and stop acquisition
|
2018-05-23 15:28:39 +02:00 |
|
|
|
bdf9373e0d
|
gotthard and jungfrau servers do not need to send whole module for sending settings anymore
|
2018-05-22 14:52:53 +02:00 |
|
|
|
23d73ae5ae
|
jungfrau server: programming allowed only in -update or -dev mode, -dev strictly for Carlos, in update mode one can only do programming
|
2018-05-11 13:42:46 +02:00 |
|
|
|
8986b008dd
|
jungfrau server: programfpga: handling bus error, and printing a message for user to restart servers when done in client command line
|
2018-05-09 15:57:18 +02:00 |
|
|
|
02cc284422
|
added binaries
|
2018-05-09 15:27:28 +02:00 |
|
|
|
e6c0304af1
|
jungfrau server: programfpga: stop server also mapped during a reset, binaries added
|
2018-05-09 15:16:04 +02:00 |
|
|
|
68e9648854
|
created programming mode, where only programming is allowed, one has to restart servers afterwards
|
2018-05-09 11:20:54 +02:00 |
|
|
|
a37bbc50fe
|
updated server binaries
|
2018-05-02 17:48:46 +02:00 |
|
|
|
d096a5efeb
|
jungfrau server: default storage cell start is 0xf
|
2018-04-26 16:30:27 +02:00 |
|
|
|
9f24bb0a98
|
jungfrauserver: bug fix: settings read correctly, forceswitchg2 mainly
|
2018-04-26 15:49:09 +02:00 |
|
|
|
c9675d111a
|
jungfrau server: fixed the settings for gain2 stages
|
2018-04-23 16:11:04 +02:00 |
|
|
|
a5a3d4bc78
|
added jungfrau server binary
|
2018-04-13 17:42:04 +02:00 |
|
|
|
bc70cc3a26
|
jungfrau server: added storage start, connected auto_comp_disable, changed adcphase, added ADC_PORT_INVERT_VAL, ADC_OFST_HALF_SPEED_VAL, minimum exposure time
|
2018-04-13 17:33:46 +02:00 |
|
|
|
e024774323
|
added storage cells
|
2018-04-13 15:05:43 +02:00 |
|
|
|
bdcccb7732
|
jungfrau server, changed api, fixed regdefs
|
2018-04-13 11:43:30 +02:00 |
|
|
|
5ff2e86060
|
jungfrau server configuring ASIC timer at server startup
|
2018-04-13 11:07:22 +02:00 |
|
|
|
d28f293485
|
jungfrau and eiger server bug fix: module_firmware_version gets stuck as it expects an int, but should have been for module_serial_number
|
2018-04-06 12:15:57 +02:00 |
|
|
|
a36b715eab
|
resolved conflicts from merging 3.1.1 in here
|
2018-03-21 09:03:31 +01:00 |
|
|
|
688dd15fe9
|
Jungfrau bug fix: cannot give same adcphase value to pll, updated recommended default of adcphase for half speed and quarter speed, updated client manuals for both adcphase and clkdivider
|
2018-03-20 12:12:38 +01:00 |
|
|
|
40210ae26f
|
jungfrauserver adcphase fix: bug was if adcphase was same as previous value, it still shifted
|
2018-03-14 17:20:26 +01:00 |
|
|
|
b58c3e8951
|
solving merging conflicts from 3.1.0 to developer
|
2018-03-14 15:45:35 +01:00 |
|
|
|
fee6465213
|
eiger and jungfrau servers int to uint32_t for read and write registers
|
2018-03-08 16:46:15 +01:00 |
|
|
|
3878212ffd
|
jungfrau server adcphase not responding to a get properly
|
2018-03-08 15:17:14 +01:00 |
|
|
|
61e7c0148f
|
updating versions to 3.1.0
|
2018-02-27 12:40:53 +01:00 |
|
|
|
d14234ee38
|
jungfrau server bianries
|
2018-02-26 14:43:53 +01:00 |
|
|
|
a4aa862ee4
|
bugfix jungfrau server : tdma bit also needs to be set to enable
|
2018-02-26 14:43:11 +01:00 |
|
|
|
0b017b886c
|
added release documentation
|
2018-02-26 13:28:31 +01:00 |
|
|
|
ebe1ff4563
|
jungfrau virtual server needed the stop server as well
|
2018-02-23 15:32:05 +01:00 |
|
|
|
9322c176f2
|
jungfrau server virtual
|
2018-02-23 12:48:11 +01:00 |
|
|
|
639fdac232
|
created jungfrau virtual server(in next commit), edited install manual to give out html pages without subsection toc, links, navigaion, spilit into as many sections etc for wiki page
|
2018-02-23 12:45:31 +01:00 |
|
|
|
7364f674ed
|
[JUNGFRAU] - Modified memory map address shift for the interface between FPGA and Blackfin SOM. Shift has to be set to 1 since the basic AMC data transfers is 8-bit and not 16-bit.
|
2018-02-22 11:15:24 +01:00 |
|
|
|
897cbac27d
|
merge from 3.0.1 for server binaries (adcphase,server dates, temp control, settings file
|
2018-02-07 11:02:36 +01:00 |
|
|
|
618f6291cf
|
server binaries for all, jungfgrauserver with adcphase returning something, serverclient interface fixed for others not using tempcontrol, detectornumber not used for settings file for non eiger/mythen, server dates removing rev number
|
2018-02-07 09:23:52 +01:00 |
|
|
|
3da6a6df65
|
merge conflict removed, jungfrau server and eiger server re compiled
|
2018-02-05 12:33:05 +01:00 |
|
|
|
e6bd874a88
|
modified jungfrau server and client to make auto_comp_disable a not yet implemented feature as it requires a firmware upgrade
|
2018-02-05 11:50:22 +01:00 |
|
|
|
5d04067973
|
added auto comp disable feature
|
2018-02-02 18:01:01 +01:00 |
|
|
|
c520f10409
|
jungfrau server binaries
|
2018-02-02 15:19:10 +01:00 |
|
|
|
1872deb1dd
|
fix for temperature workaround for fpga
|
2018-02-02 15:17:40 +01:00 |
|
|
|
e6f475d7c4
|
jungfrau server changes in temperature control for fpga bug: default temp threshold and temp event cleared at start and power reg only reads enable and not status
|
2018-02-02 12:37:52 +01:00 |
|
Dhanya Maliakal
|
061abf7be0
|
jungfrau server: changes to ensure no update of detector during this, included power chip to read the status bit and give error if temp event is up
|
2018-01-11 16:52:08 +01:00 |
|
Dhanya Maliakal
|
2d6e4c95a2
|
temp_threshold, temp_control, temp_event done
|
2018-01-11 15:37:24 +01:00 |
|
Dhanya Maliakal
|
a87687199f
|
jungfrau server: minor typo in previous ocmmit
|
2018-01-11 11:36:40 +01:00 |
|
Dhanya Maliakal
|
d879379aa4
|
jungfrau server: incorporated transmission delay
|
2018-01-11 11:33:26 +01:00 |
|
Dhanya Maliakal
|
8fc3d97e78
|
jungfrau server: changed delay to trigger delay to have better trigger being caught
|
2018-01-11 09:26:50 +01:00 |
|
