- renamed conda-recipe folder
- added a check to see if build and install folder exists in build.sh (conda recipe)
- created VERSION file that has '0.0.0'for developer but can be updated using update_version.py that takes in a version. The script checks for semantic versioning and updates VERSION file
- VERSION file also copied along with py files to slsdet in python cmakelist and build_pylib.sh (for conda), also copied in root folder for installations (for no coding purpose)
- init.py and setup.py reads this file to get the version (a bit differently to find the VERSION file)
- VERSION file read into cmake to get the version and also added to compile definition. So RELEASE removed from versionAPI.h (using SLS_DET_VERSION compile definiton instead) and also removed updateRelease script.
- conda getting project version from environment variable SLS_DET_VERSION that is set in build_pylib.sh prior.
- added 3.13 python to conda build
- anything related to ctb removed from release notes as users will always use developer
- sets 0.0.0 to VERSION file by running update_version.py without an argument
* docs receiver formats rewrite
* added documentation for all the receiver files, updated release notes, udpated help in commands help for timing, fixed by throwing exception for aa dividy by 0 error caused by not freeing memory (detsize) when switching between 1d and 2d detectors, removed unnecessary 'recevier up' printout, fixed dbit list 64 bit mask error in master json file (was not 64 bit before), fixed bug in reading gotthard1 data (needs to be tested)
* generating commands help and formatting, also fix help for trimen command line
* added ctb frame format documentation, added some links to some commands, added documentation about adding expat-devel in installation for rhel8 gui, fixed some indentation issues that screwed up command line help documentation
* added ctb frame format documentation
* updated documentation about zeromq-devel for <8.0.0 versions
* usleep in communication to actually relay the err message of memory allocation to the client (weird but test for now), function in server to handle memory allcoation issues (updates mess, ret and sendsit to the client and returns prior from function implementatin, setting fnum in client for the speicific functions that send to detector each argument separtely, they need to remember the fnum else they throw with the incorrect fnum
* server: every malloc must check if it succeeded, rearranging so that the free is clear as well (only in funcs so far)
* fixed malloc checks in other places other than funcs.c
* jf: rolling back firmware required to v1.5 and 2.5, updated release notes, fixed a bug when updating server (when server name same as link name:throws with no message, pedestal mode check changed for the time being for loops to be 0xFF size
* compensating for jf fw bug for pedestalmode where loops should be 16 bit, but is 8 bit in fw. to be fixed in next version
* formatting
* formatting, merge fix
* fixed python test simulator to kill previous servers
* rmeoved merge binary
* fixed the gendoc to reflect the new parser, updated documentation to include info about autocomplete in the command line part, error in createing docs
* fixed list deprecated, fixed command help (to show properly on a html, fixed other help warnings
* minor indents
---------
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
* first draft of fixing the free function available within the class
* removed class member function freeSharedmemory for both Detector and Module; made the free function freeSharedmemory accessible to python interface; setHostname if there is already a module in shm will recreate the Detector object while freeing shm completely and keeping detsize and intitialchecks (previous commit), sethostname called from DetectorClass in virtual command to have one point of entry (previous commit), testing Module class frees shared memory using free function
* Detector class: added copy and move constructor and assignmentoperators due to explicit destructor (DetectorImpl fwd declared), DetectorImpl class: included ZmqSocket to remove destructor (should not be virtual in any case), Module class: removed explciit destructor to allow compiler generated constructor and operators
* formatting
* minor fix for readme autocomplete
* updated client version date
* fixing nextframenumber properly with firmware
* updated firmware to have getnextframenumber and fixed setnextframenumber to reset also the header fifo when stopping
* fix tests for gotthard2
* get/set next frame number in G2 (firmware only has set, no get)
* firmware has issues: each stop keeps 2 frame header in fifo and the resetting frame number happens after that
* removed the option to set burstmode to burst external or continuwous internal
* needs to be revisited before 9.0.0
* added readoutspeed command to m3 (fullspeed - 10, half speed - 20, quarter speed - 40), removed reaodut pll, moved up system pll clock indices, leaving pll index in common altera code, default speed is half speed, allow only system_c0 to be set, the others can be obtained, same for clkphase, maxclkphaseshift, clkfreq. added to readoutspeedlist commands, updated help and updated tests
* updated readoutspeedlist command
- do not validate write reg, setbit and clearbit by default anymore
- --validate will force validation on the bitmask or entire reg
- remove return value for write reg (across server to client, but thankfully not in the Detector class)
- extend validation into writereg, setbit and clearbit for Eiger (always special)
- need to check python (TODO)
- missed the rx_zmqip implementations in detector.h and python bindings
* m3: fixed stop server not starting up with setup variables
* all servers except eiger fixed for virtual stop server to start up with setupDetector function called
* virtual tests work
* eiger: versions print neednt be in stop server
* jungfrau: stop server (not virtual) also needs to read config file
* ensuring master is setup for virtual and real servers
* enable ipv6 in zmq socket
* removed rx_zmqip API and field in gui, changed client updaterxrzip to updateclientzmqip to have the rx_hostname ip if 0.
* updated command line for rx_zmqip to give a warning.
* Replaced 'depreciated' to 'deprecated' everywhere
* switching from * to 0.0.0.0 works for rebinding zmq sockets
* fixed help in command line for rx_zmqip * to 0.0.0.0 and removed cmd in python
* remove publisher zmq socket ip also for moench post processing
* fixed tests
* publisher zmq ip macros to be reused
* moench (feature to wait for post processing to be done in new sls_detector_acquire_zmq executable)
READOUT_ACTION_ZMQ added to action enums
sls_detector_acquire_zmq added to executables
empty data call back so that client listens to last dummy zmq packet from moench post processor
processor: remove NEWZMQ ifdefs and remove connect for zmq publisher socket
* fix to compile
* cmds generated and parsed
* changed common.c readADCFromFile to make it more general and move temperature calculation for Eiger out of this function and inside whereever it is called.
* g2 and m2: gethighvoltage was just a variable set in server, it is now moved to a get inside DAC5671 implementation (but not reading a measured value, instead what is set from a file), high voltage variable used inside DAC5671 for virtual servers
* g2: switching off hv (ifrom non zero to zero value) will wait for 10s; powering on chip reconfigures chip; powering off chip unconfigures chip; powering off chip also includes check if hv = 0, if not throw exception; chip configuration checked before acquring; at start up: hv switched off and chip powered on, so does not wait 10s to switch off hv;
* included test to check powering off chip when hv is on should throw an exception
* g2: check if chip configured before acquiring
* nios: read hv value set from file and virtual still goes into DAC5671 for conversions to and fro dac to V, change common readadc to readparameter to generalize, make sethighvoltage into a get and set to catch errors in get as well, g2: if not at startup, remmeber hv value before setting it and after check if value was being switched off (from a non zero value) and wait 10s if it was (10s wait only for switching off from non zero and not at startup)
* client: stopping a blocking acquire of multi modules checks status to catch slaves that might still be in waiting. Problem is (gotthard2 25um at least) slave is in waiting only temporarily before going go idle/stopped. So a 50ms sleep is necessary ot not throw an unnecessary error
* client: when stopping blocking acquire, wait up to 1s in 50ms increments for slave to stop waiting temporarily
* period and exptime(patternwaittime level 0)
* added new regsieterdefs and updated api version and fixedpattern reg
* autogenerate commands
* formatting
* minor
* wip resetflow, readout mode, transceiver mask, transceiver enable
* acquisition, but streaming done bit and busy (exposing + read chip to fifo) not known yet from fw
* programming fpga and device tree done
* most configuration done, need to connect configuretransceiver to client
* stuck at resetting transciever timed out
* minor
* fixed virtual, added chip busyto fifo, streaming busy, set/getnext framenumber
* configuretransceiver from client, added help in client
* make formatt and command generation
* tests for xilinx ctb works
* command generation
* dacs added and tested, power not done
* power added
* added temp_fpga
* binaries in
* ctrlreg is 0 to enable chip=fixed, high dac val = min val= fixed, power regulators in weird order=fixed, device tree could be loaded with dacs before adcs=fixed
* start works
* virtual server sends
* receiver works
* tests
* python function and enum generation, commands generatorn and autocomplete, formatting, tests
* tests fail at start(transceiver not aligned)
* tests passed
* all binaries compiled
* eiger binary in
* added --nomodule cehck for xilinx
* Protect from getenv("HOME") returning nullptr (e.g., in case running in systemd)
* Write proper warning in Module.cpp
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* connected kernelversion, hardwareversion, versions, framesl, triggersl, dr, timingmode, pattern (except patioctrl) thats there for altera ctb
* replaced set/get64Bit to set/getU64bit in all loadpattern.c for (ctb and m3 also)
* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* allowing tests for xilinx
* binaries in
* updated registers, arm64
* compiler set to aarch64 for xilinx server
* updated RegisterDefs.h
* merge into generate branch and resolving conflicts and adding the xilinx changes to callerspecial and commands.yaml
* compiles and can print firmware version (using a different csp0 address)
* fixing other servers (gotthard, jungfrau, moench, mythen3) that it returns in case of mapping failure, xilinxctb: added that it checks type, prints proper fw version, checks kernel date, added armprocessor define to use in common places, added specifiers to supress overflow and truncation warnings
* added detector ip and mac adddress to the printout
* fixed tests and recompiled servers
* replacing detp with sls_Detector_put and detg with sls_detector_get
* sls_detector_not implemented, but extended message to ask user to use sls_detector_get or sls_detector_put
* autocompletion also for sls_detector or det
* commands code generation (#803)
* commands code generation for only frames command
* fix cmake file and add Caller files
* working exptime, fully extended commands file and its variants
* start adding template commands
* add INT_CMD_VEC_ID template
* add list command, generate multiple bins, format code
* reach 208 commands using the cpp macros
* add tests for command parser
* start adding tests for commands parser
* fix typo to use commands.yaml
* add more tests for command_parser
* add all template functions (up to 218 commands)
* finish template functions and add more CmdProxy.cpp functions (250+)
* 257 commands
* 300 commands the rest are very special commands
* add special commands without generation
* separate special functions from generated c++ file
* implementing one command for put and get (buggy)
* add infer action in a separate file
* generate header for special commands from yaml
* allow only 0 or 1 for bool inputs
* group all commands in gen_commands.py
* add help to gen_commands.py
* add autocomplete bash script
* autocompletion: add support for module levels and help
* remove debugging line
* add autocompletion, help to commands, change int [0,1] to bool
* copy tests for Caller.cpp. Tests pass
* update with the new developer branch changes
* fix errors after merging (there is problems with tests)
* fixed port/stopport in yaml (intput typo), added '_caller' to the test dac and test on chip dac command in global test for cmdcaller
* undo previous test simulator debug change
* add documentation for the generated code
* reducing the comment to be replaced in length so formatting does not split into 2 lines
* removed formatting specific style of C++11 in gen_commands.py to keep with the top level clang format of the project
* regeneratign code for commands
* automation generated
* Redirect deprecated commands (#872)
* working implementation, need to fix dac
* fixed deprecation redirect for dac command
* Detector specific autocomplete (#873)
* working implementation, need to fix dac
* fixed deprecation redirect for dac command
* detector specific completion for dac
* added autocomplete using detector specific
* fixed error when autocompleting partial words
* Generate commands/fix commands (#875)
* fix vm_a, im_a etc have deg Celsius suffix, also help missing or changed in some places
* dac: require det id for all, arg0 to be printed at output, help for onchip dac and dac, onchipdac: spacing
* getscan detid and blocking trigger help
* udp_Dstlist det_id fixed, but rx_id invalid
* cmdApp in line with cmdLineApp (missing version, receiver_id, not creating det object in help action
* added set_command to differentiate between check_det_id and require_det_id (mixed up), args: -1 needs to check for at least one argument
* reordering
* reordering and checked till integer_command_hex
* fixed a lot more commands
* fix caller tests for eiger
* changes to tests after Bechir left
* changing .cmd to .cmdcall for the caller commands
* fixed tests for caller, still warning for setexptime about cast input
* autocomplete ran
* add moench test
* regenerating autocomplete and commands
* fixing other things from merge conflicts (renaming slsDetectorDefs to defs in commands.yaml)
* formatting
* added code injection to help (#876)
* updated 3 commands to have get output that can be put into put (#877)
* updated some commands to have get output that can be put into put
* fix tests for clkdiv
* adding help to free (#878)
* removing old commands and renaming them, (also making it work for parameters command as it was still calling cmdproxy) (#879)
* More helpful error messages for unsupported actions (#880)
* removing old commands and renaming them, (also making it work for parameters command as it was still calling cmdproxy)
* Added specific help for unsupported actions
* fixed a vetofile get special exception message. more specific warning for special exception message instead of no function warning
* added condition checking true in exceptions for special message
---------
Co-authored-by: Bechir Brahem <bachbrahem@gmail.com>
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* if blocking and handling sync, only master gets blocking acq, slaves get non blocking as they are first and so dont get status or error caught when slaves dont get trigger (due to not connected etc) and acq returns with slaves still in waiting status. so check status of all in blocking acq
* for all dets with sync, ensure atleast one master when starting acq
* docs updated about sync
* draft to fix virtual test when it fails
* catching errors in tests and removing sigchild ignore so servers (process in background) executing commands will not fail (pclose no child processes, if sigchld is ignored) fixed
* uncommented python loading config
* somehow killal slsReciever in second detector test fails even though no receiver running
* fixing script for virtual simlator test:fixed issue with check if process running, fixed moench tests
