* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* connected kernelversion, hardwareversion, versions, framesl, triggersl, dr, timingmode, pattern (except patioctrl) thats there for altera ctb
* replaced set/get64Bit to set/getU64bit in all loadpattern.c for (ctb and m3 also)
* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* allowing tests for xilinx
* binaries in
* updated registers, arm64
* compiler set to aarch64 for xilinx server
* updated RegisterDefs.h
* merge into generate branch and resolving conflicts and adding the xilinx changes to callerspecial and commands.yaml
* compiles and can print firmware version (using a different csp0 address)
* fixing other servers (gotthard, jungfrau, moench, mythen3) that it returns in case of mapping failure, xilinxctb: added that it checks type, prints proper fw version, checks kernel date, added armprocessor define to use in common places, added specifiers to supress overflow and truncation warnings
* added detector ip and mac adddress to the printout
* fixed tests and recompiled servers
* draft to fix virtual test when it fails
* catching errors in tests and removing sigchild ignore so servers (process in background) executing commands will not fail (pclose no child processes, if sigchld is ignored) fixed
* uncommented python loading config
* somehow killal slsReciever in second detector test fails even though no receiver running
* fixing script for virtual simlator test:fixed issue with check if process running, fixed moench tests
* when dbit list is enabled, the size of data in zmq stream is changed to only the digital bits enabled size. now fixed to also include analog size
* allowing to set 0xffffffffffffffff to pat io control. prevously was used to do a get. fixed also for pat bit mask and pat mask
* moench, removed chip version, filter resistor, filter cells, currentsoures, gain mode, setttings(modes), dbitphase, maxdbitphase, autocompdisable, comparatordisabletime, made acq start and stop a pulse, removed unused registers
* added parallel command
* remove gain plot for moench
* moench: updated adc invert val
* moench: update adcoffset to 0xf and adcphase to 140 degrees
* removed sync clock in moench
* updated min fw version
* removing config file in moench server
* copied jungfrau server to moench and adapted
* fixed image size and num packets
* read n rows allows 16
* commneted out configure_asic_timer at server startup. To be removed later the ASIC_CTRL_REG and storage cell options
* moench:removing the decrement (which was in jf) in read n rows to register
* removed lblsamples from gui
- qt4->qt5
- in built qt5 6.1.5 because rhel7 is not upto date with qt5, removed findqwt.cmake
- made a fix in qwt lib (qwt_plot_layout.h) to work with 5.15 and lower versions for qrect constr.
- qt5 forms fixed, qt4 many hard coding forms switched to forms including qtabwidget, scrolls etc, fonts moved to forms
- docking option enabled by default, removed option to disable docking feature from "Mode"
- added qVersionResolve utility functions to handle compatibility before and after qt5.12
- qtplots (ian's code) takes in gain mode enable to set some settings within the class, with proper gain plot ticks
- ensure gain plots have no zooming of z axis in 2d and y axis in 1d
- removed placeholder text in qpalette in main window form as its not supportd until 5.12 (so using qt5.9 designer insted of qt5.15 to cope)
- tab order
Servers:
- fixed some error messages that were empty for fail in funcs (mostly minor as if this error, major issues)
- removed getClientServerAPIVersion in server (not used)
- removed rxr side (clientversion compatibility check), removed enum as well as it is now done on the client side.
- versionAPI.h
- GITBRANCH changed to RELEASE
- dates for all API changed to "sem_version date". Scripts to compile servers modified for this. Empty "branch" name will end up with developer for sem_version.
- Version class with constructor taking in the long version (APILIB date). Other member functions including concise(to get sem_version for new releases and date for old releases),
- bypassing initial tests, also now bypasses the client-rxr compatibility check (at rx_hostname command)
- previously, compatibility between client-det was ensuring both had the same detector API (eg. same APIJUNGFRAU)
- Now, compatibility only checks APILIB (client side) and detector API(eg. APIJUNGFRAU) (detector side) have same major version. It only does backward compatibility test. Rest is upto user to ensure.
- If server is from an older release, it will compare dates like previous implementation (APIJUNGFRAU from both client and det)
- - previously, compatibility between client-rxr was ensuring both had the same APIRECEIVER
- Now, compatibility only checks APILIB (client side) and APIRECEIVER (rxr side) have same major version. It only does backward compatibility test. Rest is upto user to ensure.
- If rxr is from an older release, it will compare dates like previous implementation (APIRECEIVER from both client and rxr)
- removed APIGUI, evalVersionVariables.sh, genVersionHeader.sh (not needed or not used)
- clientVersion, rxrversion and detectorserverversion all return strings and not integers (in hex) anymore. Depending if it has semantic versioning, it will print that or the date if it is too old.
- fixed in python (strings for versions)
- check_version function in detector server changed to "initial checks" as it only checks server-firmware compatibility and initial server checks. Client compatibilities are moved to client side.
- --version gives sem_version and date? Is date needed as well. The clientversion, detserverversion and rxrversion API gives only sem_version (no date)
- - formatting
* badchannels for m3 and modify for g2 (file from single and multi)
* m3: invert polarity of bit 7 and 11 signals from setmodule, allow commas in bad channel file
* badchannel file can take commas, colons and comments (also taking care of spaces at the end of channel numbers)
* tests 'badchannels' and 'Channel file reading' added, removing duplicates in badchannel list, defining macro for num counters in client side
* fix segfault when list from file is empty,
* fix tests assertion for ctbconfig (adding message) for c++11
* fixed badchannels in m3server (clocking in trimming)
* badchannel tests can be run from any folder (finds the file)
* g2: new hdi values, write hdi value to reg, set slave/master to reg, able to set master from server config file, server command line and client
* print versions for virtual as well
* separating pattern levels from command name: command line done
* separated patten level from command in examples and default pattern files in servers
* command line and server works
* python: patnloop not verified, wip
* works except for patloop (set, and get does not list properly)
* minor
* fixed tests
* added 3 more levels for ctb and moench
* wip
* minor err msg
* minor
* binaries in
* separating pattern levels from command name: command line done
* separated patten level from command in examples and default pattern files in servers
* command line and server works
* python: patnloop not verified, wip
* works except for patloop (set, and get does not list properly)
* minor
* fixed tests
* added 3 more levels for ctb and moench
* wip
* minor err msg
* minor
* binaries in
* python working
* import fix
* changed fw version for ctb and moench. binaries in
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
* vicin default changed to 800, only setting vthx directly allows to set dac even if counter disabled, else disable counter, setallthresholdenergy if an energy is -1, get module value, fix that reg was repaced by isettings
* vth3 disabled for interpolation enable, interpolation disable sets counter mask to what it was before (updating old mask whn setting counter mask except for setting all counters for interpolation enable) and enabling vth3 if counter was enabled
* refactor and test for previous commit
* pump probe only has vth2 enabled, handles both pump probe mode and interpolation mode as well
* wip
* refactored pump probe and interpolation and added to setmodule
* check dacs and trimbits out of range for setmodule (not just threshold)
* binaries in
* m3: pump probe and interpolation mutually exclusive
* minor
