|
|
cb635d800a
|
eiger server: added overflow, noverflow to the flags to show/not show saturation when there is overflow in any of the single subframes in 32 bit mode
|
2018-05-22 18:43:13 +02:00 |
|
|
|
1152555663
|
esrf changes: rx_udpsocksize sets/gets udp socket buffer size to be set, rx_realudpsocksize gets the real udp sock size buffer. At receiver config and at rx_udpsocksize command, dummy udp sockets created to know if set udp sock size fails (if fail, set to previous value), and also to get the real udp sock buffer size
|
2018-05-01 11:55:48 +02:00 |
|
|
|
2bd8e6c166
|
zmq fixed to have additional json headers using rx_zmqjsonheader
|
2018-04-09 16:33:14 +02:00 |
|
Dhanya Maliakal
|
08fda2b662
|
in between in terms of mythen3 server, done with setdac and set power
|
2018-02-01 17:48:43 +01:00 |
|
Andrä Marie
|
3aeb3f58d1
|
first mythen3Server commit
|
2018-01-22 14:01:46 +01:00 |
|
Dhanya Maliakal
|
428855d801
|
in between
|
2017-11-17 14:02:00 +01:00 |
|
Dhanya Maliakal
|
51499fa503
|
merge conflict from 3.0.1
|
2017-11-17 11:35:02 +01:00 |
|
Dhanya Maliakal
|
dda86cfe9b
|
somewhere in separating zmq rxr and client
|
2017-11-14 16:26:17 +01:00 |
|
Dhanya Maliakal
|
49378e6d09
|
added streamsrcip command to be able to change the interface from which receiver streams data from
|
2017-09-12 14:33:11 +02:00 |
|
Dhanya Maliakal
|
e3667f6827
|
can set zmqport from receiver
|
2017-07-13 12:18:07 +02:00 |
|
|
|
cbbdd8eeab
|
Merged to developer
|
2017-06-13 15:30:33 +02:00 |
|
|
|
8caab4e562
|
Modicfications for chiptestboard and moench03 module
|
2017-06-13 15:28:45 +02:00 |
|
Dhanya Maliakal
|
0254ff0281
|
cleaning up of servers
|
2017-06-02 19:29:34 +02:00 |
|
Dhanya Maliakal
|
7e00d9f395
|
Merge branch 'developer' into hdf5
|
2017-03-03 10:06:34 +01:00 |
|
|
|
f12df80c5b
|
some changes for chiptest board and mythen server now compiles
|
2017-02-23 12:05:34 +01:00 |
|
Dhanya Maliakal
|
87ce1ed736
|
moved tau to settings file, removed gain and offset, setting threshold loads settings file, setting threshold only sets client variable
|
2017-02-03 12:29:44 +01:00 |
|
|
|
987aeda6fb
|
sorted out problem with CPU read out
|
2016-12-22 17:24:53 +01:00 |
|
|
|
12cd3d07a2
|
some changes for jctb
|
2016-12-19 12:05:59 +01:00 |
|
|
|
cb879c61ca
|
changes for new chipterboard -now works with reduced dynamic range and analog/digital readout
|
2016-11-09 11:36:59 +01:00 |
|
Dhanya Maliakal
|
4b99ff7fbe
|
reset fpga implemented, changed receiver configuration warning prints, powerchip implemented
|
2016-11-03 12:31:34 +01:00 |
|
Dhanya Maliakal
|
28f96f4b51
|
included a febl and febr temp read
|
2016-10-07 15:44:13 +02:00 |
|
|
|
b90ca7b864
|
Added DACs for ne chiptestboard; fixed problem on dac14/highvoltage for moench
|
2016-08-16 15:15:24 +02:00 |
|
Dhanya Maliakal
|
29ba1f4042
|
changed transmission delay commands to go through network parameters and included 10g flow control
|
2016-08-04 17:21:16 +02:00 |
|
Dhanya Maliakal
|
d28d737fb9
|
transmission delay added
|
2016-08-03 17:03:37 +02:00 |
|
Dhanya Maliakal
|
1db5ef4fd4
|
added 2 gain settings to eigeR
|
2016-08-03 10:35:11 +02:00 |
|
Dhanya Maliakal
|
c0db1a89a8
|
deactivate for eiger
|
2016-08-02 10:32:37 +02:00 |
|
Dhanya Maliakal
|
ac7063a1a5
|
check firmware version and api version upon server startup
|
2016-07-22 15:26:26 +02:00 |
|
Dhanya Maliakal
|
ee26339fd7
|
added more accurate temperature sensors for eiger, and to gui
|
2016-07-22 10:40:58 +02:00 |
|
Dhanya Maliakal
|
35b02c9cf0
|
added burst_trigger mode for eiger to replace trigger_readout mode
|
2016-07-04 15:47:32 +02:00 |
|
Dhanya Maliakal
|
db26135e89
|
undefined enum changed
|
2016-03-15 17:13:37 +01:00 |
|
Dhanya Maliakal
|
26933bd8bd
|
fixed undefined gain enum to a large number
|
2016-03-15 16:50:44 +01:00 |
|
Dhanya Maliakal
|
7b7d42f253
|
fixed the 8 byte iodelay trimfile bug, now writes as 4 bytes
|
2016-03-14 14:39:40 +01:00 |
|
|
|
d8007477b5
|
High Voltage index changed for jungfrau
|
2016-02-22 15:11:30 +01:00 |
|
Dhanya Maliakal
|
5029eb0c86
|
bug fixed maximum sub exposure time is in 10 ns and not ns
|
2016-02-08 15:25:28 +01:00 |
|
Dhanya Maliakal
|
61f0506c2c
|
settings for jungfrau
|
2015-12-01 16:43:23 +01:00 |
|
Dhanya Maliakal
|
816543f358
|
detector ip for eiger is replaced by hardware ip for 1g
|
2015-11-06 11:10:51 +01:00 |
|
|
|
8972fa1143
|
EigerDetectorServer for firmware version 11, changes: direct write into udp block ram
|
2015-10-08 17:29:13 +02:00 |
|
Dhanya Maliakal
|
584b9e6036
|
added gain and offsets to the shared memory, that are sent along with sls_detector_module, only for eiger
|
2015-09-04 15:54:12 +02:00 |
|
Dhanya Maliakal
|
cae286941a
|
added subframe exposure time settable
|
2015-09-03 15:16:48 +02:00 |
|
Dhanya Maliakal
|
0d83346943
|
continuous and storeinram variable
|
2015-07-24 09:21:38 +02:00 |
|
|
|
1edcdff936
|
Updates for JCTB: adcvpp, save parameters. jungfrauDetectorServer works with JMCBv0.1
|
2015-03-31 13:54:59 +02:00 |
|
|
|
9ac08e5e76
|
supports frames with many samples for jctb - obtained by faking number of chips in case of many samples
|
2015-01-30 12:58:53 +01:00 |
|
|
|
d10335e4a9
|
pattern generator produces binary file as well; adc clock frequency can be changed as well as run clock frequency
|
2014-11-25 11:38:19 +01:00 |
|
Maliakal Dhanya
|
d8c7201749
|
module udpport2
|
2014-09-26 11:18:59 +02:00 |
|
Maliakal Dhanya
|
018b800117
|
eiger receiver, receiving many packets at a time, with 16,8, 4 bitmode sort of working
|
2014-07-02 10:55:32 +02:00 |
|
Maliakal Dhanya
|
8788a060dd
|
creating a separate receiver
|
2014-05-21 09:44:35 +02:00 |
|
l_maliakal_d
|
c45c417a0a
|
got rid of trigger frame and trigger window to merge with other timing modes
git-svn-id: file:///afs/psi.ch/project/sls_det_software/svn/slsDetectorSoftware@809 951219d9-93cf-4727-9268-0efd64621fa3
|
2014-03-26 14:06:48 +00:00 |
|
l_maliakal_d
|
8b833b0f7e
|
removed salas code for the time being, implemented overwrite, fixed prob of communciating between detector and receiver for settimer
git-svn-id: file:///afs/psi.ch/project/sls_det_software/svn/slsDetectorSoftware@803 951219d9-93cf-4727-9268-0efd64621fa3
|
2014-03-25 15:32:12 +00:00 |
|
l_maliakal_d
|
549bd32527
|
eiger basic functionalities implemented
git-svn-id: file:///afs/psi.ch/project/sls_det_software/svn/slsDetectorSoftware@779 951219d9-93cf-4727-9268-0efd64621fa3
|
2014-03-14 10:55:31 +00:00 |
|
bergamaschi
|
65748059cc
|
Added some commands for moench and modified the moenchServer
git-svn-id: file:///afs/psi.ch/project/sls_det_software/svn/slsDetectorSoftware@673 951219d9-93cf-4727-9268-0efd64621fa3
|
2013-09-18 10:56:03 +00:00 |
|
