* moench: changed max shifts of adc clk from 240 to 200 (#909)
* moench server name and version renaming
* 802/moench default speed (#910)
* moench:change default speed to half speed
* Protect from getenv("HOME") returning nullptr (#907)
* Protect from getenv("HOME") returning nullptr (e.g., in case running in systemd)
* Write proper warning in Module.cpp
* moench: min exptime and also a firmware update required (#911)
* moench server: changed default values of adcphase for full speed from 300 to 150 and dac vipre_cds from 800 to 1280 (#921)
* client bug fix: m3 multi module bad channel file throws bad allocation when modules skipped, needed to add vectors in 2d vector of bad channel list (#919)
* 8.0.2.rc: client: blocking acquire stop with slave temporarily in waiting (#925)
* client: stopping a blocking acquire of multi modules checks status to catch slaves that might still be in waiting. Problem is (gotthard2 25um at least) slave is in waiting only temporarily before going go idle/stopped. So a 50ms sleep is necessary ot not throw an unnecessary error
* client: when stopping blocking acquire, wait up to 1s in 50ms increments for slave to stop waiting temporarily
* fix to rapidjson for build with gcc 14 (#928)
* 8.0.2.rc: m3 clkdiv0 20 (#923)
* m3: clk 0 changed from 10 to 20 (100MHz to 50MHz)
* g2: startup clk div back to 10 as in firmware but setting in software startup to 20
* 8.0.2.rc: moench empty data callback (#935)
* moench: empty data call back so that zmq sockets are still made and listened to in acquire that it waits for the dummy packet to be done
* moench zmq postprocessor: remove NEWZMQ ifdefs and remove connect for publisher socket
* changed enum from READOUT_ACTION_ZMQ to READOUT_ZMQ_ACTION for consistency
* 8.0.2.rc: client: status for blocking acquire stop with slave temporarily in waiting (#943)
* acq finish call back gets status squashed with default error but before that need to wait for gotthard slaves to catch up from waiting to stopped
* bug fixes related to file saving (#931)
* fix the file path resetting issue of GUI in the case where different modules have different fpath setting.
* fix stack-buffer-overflow issue when using HDF5 HDF5DataFile::parameterDataTypes have 64bit type (i.e. STD_U64LE), the size of fill_value should be at least 8 bytes.
* change the type of fill_value to uint64_t
* updated documentation from martin (#947)
* 802: jungfrau HW 1.0: adc output clock phase to 120 (#951)
* jungfrau: change adc output clock phase from 180 to 120 for v1.0 boards for reliable readout of adc #2
* formatting
* 802/release notes (#954)
* updated release notes
* versioning
* fixed a warning about narrowing conversion from size_t to int (#962)
* updating client versioning
* dont build doc for Tobi Schluter from libzmq, which uses iso-8859-1 and the umlaut cause compilation to fail on some machines (#972)
* updated release notes
---------
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
Co-authored-by: Z.H. Li <zhenghenge@gmail.com>
* forward declare zmq_msg_t and moved include
* removed zmq as dependency for slsdet (#870)
* Fixed path when building as submodule
* new moench data structure for offline processing
* meonch raw data and zmq process files updated to 7.0.3 version
* implemented config file for Zmq file
* raw data and zmq work with config file, but only with one file/interface
* zmq config change
* added config examples for zmq and rawdata
* update release notes, release versions
---------
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: froejdh_e <erik.frojdh@psi.ch>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
Co-authored-by: anberga <34126852+anberga@users.noreply.github.com>
* fix virtual test when it fails
* catching errors in tests and removing sigchild ignore so servers (process in background) executing commands will not fail (pclose no child processes, if sigchld is ignored) fixed
* uncommented python loading config
* somehow killal slsReciever in second detector test fails even though no receiver running
* fixing script for virtual simlator test:fixed issue with check if process running, fixed moench tests
* jf: if bit 14 in reg 0x5d (electron mode collection bit) is changed, configure chip if v1.1 and powered on. so touch writeregister (setbit/clearbit also calls write register in the end). replace when electroncollectionmode command introduced
* rewrite of status reg bits, waiting state includes both wati for trigger and start frame, blocking trigger only waits if its not in waiting for trigger and run busy enabled, error state connected in firmware
* jf sync mode master could return idle when stopped and so not all modules return the same value and must check for 'stopped or idle', Also must throw if any of the module gives an error
* added contains_only to sls::Result (#827)
* added variadic template for checking if a result contains only specified values
* fix for gcc4.8
* renamed to Result::contains_only
* stop on only the positions
---------
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
* getVoltageList, getVoltage /set, getMeasuredVoltage, getVoltageNames /set, getVoltageIndex moved to 'Power' as its misleading
* added cstdint and names slowadc, added division to mV
* changed uV to mV in command line slow adc help. removed all python slowadcs (as it was already implemented as slowadc
---------
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
* merge fix from 7.0.2: new jungfrau fw versions, incremented binary, hdf5 and json versions
* moench: changed dac names and default values to old moench values
* moench: remove interface clk polarity at start up
* moench: default speed is half speed, default values for adc offset and adc phase for different speeds (only half speed confirmed), adc vref voltage to 2.0 like G1
* moench: connected adc pipeline to client
* moench: receiver- default frames per file is 100k and discard partial frames as default
* moench binary in
* using tostring in gui for dacs
* moved frame discard policy as a parameter to be configured with a default depending on detector
* moench: 300 degrees for adc phase in full speed
* silence warnings
* making constructors explicit to avoid unintended conversions
* changed struct to class since we already have public:
---------
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* using fetchcontent to get zmq
* local copy of libzmq
* added guard for policy setting
* removed the need to export by using build interface
* removed zmq hint from cmk script
---------
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
Co-authored-by: froejdh_e <erik.frojdh@psi.ch>
* transceiverenable, tsamples, romode for tranceiver and digital_transceiver
* 202 spec instr only for transceiver mode
* removed check for empty in trans readout and clean memory before reading from fifo
* ctb read fifo strobe for all after reading all channels, adding 1us after selecting channel, changing fw date
* updated 10gb transceiver enable
----
* added transceiver (tsamples, romode(transceiver, digital_transceiver), transceiverenable (mask)
* clean memory before reading from fifo (for analog and digital as well)
* read fifo then read strobe (also corresp fw) fixes number of reads (also for analg and digital)-> increases all pipelines by 1
* fixed bug in rearranging digital data in receiver
* fixed bug in streaming size of data after rearranging
* fixed bug in setbit, clearbit,and getbit
* status checks fifo before returning idle (transmitting if data in fifo if transceiver more enabled)
* soem matterhorn specifics that will need to be put into pattern in a month or two. this is temporary.
* NOTE: breaking api. rxParameters struct has transceiverenabel and tsamples given from det to receiver
* when dbit list is enabled, the size of data in zmq stream is changed to only the digital bits enabled size. now fixed to also include analog size
* allowing to set 0xffffffffffffffff to pat io control. prevously was used to do a get. fixed also for pat bit mask and pat mask
- start acq list: mixup with master pos #743 : fix that only master starts second and not all (for start acq), typo with pos and masters list
- synced master status running when setting to slave #747: synced master status running when setting to slave
* moench, removed chip version, filter resistor, filter cells, currentsoures, gain mode, setttings(modes), dbitphase, maxdbitphase, autocompdisable, comparatordisabletime, made acq start and stop a pulse, removed unused registers
* added parallel command
* remove gain plot for moench
* moench: updated adc invert val
* moench: update adcoffset to 0xf and adcphase to 140 degrees
* removed sync clock in moench
* updated min fw version
* removing config file in moench server
adding rx_roi also in the zmq header for external guis to put the "yellow box".. sending full roi instead of -1, and sending for each zmq port. "(multiple yellow boxes)".
* merge fix from #721 PR (sync) 7.0.2.rc -> developer
* row and column for jungfrau mixed up
* multi module jungfrau sync must do slaves first then master for start acquisition and send software trigger, and master first and then slaves for stopacquisition
* non blocking to slaves first and only then blocking/nonblocking to the master for sending software trigger(jungfrau multi mod sync)
* fixed get/set timing jungfrau when sync enabled, getsync during blocking acquire (for trigger or stop) will get stuck as it should ask the stop server
* switching between 1 and 2 interfaces did not set gui/client zmq port properly. Resulted in dummy streaming forever. fixed
* formatting, refactoring: const & for positions, multi mod M3 stop first master first
* adding missing cstdint for gcc 13
* Refactoring handle sync out, handling synchronization also for softwaretrigger for m3, for start/sync/stop for g2/g1
---------
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
* fixed row and col for moench 2 interfaces
* fix moench getTiming and also allow moench to handle sync
---------
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
* rx_hostname and port combo to one, or hostname to all, or a vector of hostnames and ports, ignoring none or empty, then verifying no duplicates for the host port combo including from shared memory
* extracted function for rx_hostname (#694)
* c++14 revert
* unique hostname-port combo for port, hostname, rx_tcpport (#696)
* verify unique combo for rx_port as well
* check unique hostname-port combo also when setting control port, hostname, rx_hostname and rx_tcpport
---------
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
Co-authored-by: Erik Frojdh <erik.frojdh@psi.ch>
* eiger: hardwareversion, fix firmware version unable to read version scenarios, check to see if febl, febr and beb have same fw version
* feb versions can be picked up only after feb initialization
