* moench: changed max shifts of adc clk from 240 to 200 (#909)
* moench server name and version renaming
* 802/moench default speed (#910)
* moench:change default speed to half speed
* Protect from getenv("HOME") returning nullptr (#907)
* Protect from getenv("HOME") returning nullptr (e.g., in case running in systemd)
* Write proper warning in Module.cpp
* moench: min exptime and also a firmware update required (#911)
* moench server: changed default values of adcphase for full speed from 300 to 150 and dac vipre_cds from 800 to 1280 (#921)
* client bug fix: m3 multi module bad channel file throws bad allocation when modules skipped, needed to add vectors in 2d vector of bad channel list (#919)
* 8.0.2.rc: client: blocking acquire stop with slave temporarily in waiting (#925)
* client: stopping a blocking acquire of multi modules checks status to catch slaves that might still be in waiting. Problem is (gotthard2 25um at least) slave is in waiting only temporarily before going go idle/stopped. So a 50ms sleep is necessary ot not throw an unnecessary error
* client: when stopping blocking acquire, wait up to 1s in 50ms increments for slave to stop waiting temporarily
* fix to rapidjson for build with gcc 14 (#928)
* 8.0.2.rc: m3 clkdiv0 20 (#923)
* m3: clk 0 changed from 10 to 20 (100MHz to 50MHz)
* g2: startup clk div back to 10 as in firmware but setting in software startup to 20
* 8.0.2.rc: moench empty data callback (#935)
* moench: empty data call back so that zmq sockets are still made and listened to in acquire that it waits for the dummy packet to be done
* moench zmq postprocessor: remove NEWZMQ ifdefs and remove connect for publisher socket
* changed enum from READOUT_ACTION_ZMQ to READOUT_ZMQ_ACTION for consistency
* 8.0.2.rc: client: status for blocking acquire stop with slave temporarily in waiting (#943)
* acq finish call back gets status squashed with default error but before that need to wait for gotthard slaves to catch up from waiting to stopped
* bug fixes related to file saving (#931)
* fix the file path resetting issue of GUI in the case where different modules have different fpath setting.
* fix stack-buffer-overflow issue when using HDF5 HDF5DataFile::parameterDataTypes have 64bit type (i.e. STD_U64LE), the size of fill_value should be at least 8 bytes.
* change the type of fill_value to uint64_t
* updated documentation from martin (#947)
* 802: jungfrau HW 1.0: adc output clock phase to 120 (#951)
* jungfrau: change adc output clock phase from 180 to 120 for v1.0 boards for reliable readout of adc #2
* formatting
* 802/release notes (#954)
* updated release notes
* versioning
* fixed a warning about narrowing conversion from size_t to int (#962)
* updating client versioning
* dont build doc for Tobi Schluter from libzmq, which uses iso-8859-1 and the umlaut cause compilation to fail on some machines (#972)
* updated release notes
---------
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
Co-authored-by: Z.H. Li <zhenghenge@gmail.com>
* badchannels for m3 and modify for g2 (file from single and multi)
* m3: invert polarity of bit 7 and 11 signals from setmodule, allow commas in bad channel file
* badchannel file can take commas, colons and comments (also taking care of spaces at the end of channel numbers)
* tests 'badchannels' and 'Channel file reading' added, removing duplicates in badchannel list, defining macro for num counters in client side
* fix segfault when list from file is empty,
* fix tests assertion for ctbconfig (adding message) for c++11
* fixed badchannels in m3server (clocking in trimming)
* badchannel tests can be run from any folder (finds the file)
* vicin default changed to 800, only setting vthx directly allows to set dac even if counter disabled, else disable counter, setallthresholdenergy if an energy is -1, get module value, fix that reg was repaced by isettings
* vth3 disabled for interpolation enable, interpolation disable sets counter mask to what it was before (updating old mask whn setting counter mask except for setting all counters for interpolation enable) and enabling vth3 if counter was enabled
* refactor and test for previous commit
* pump probe only has vth2 enabled, handles both pump probe mode and interpolation mode as well
* wip
* refactored pump probe and interpolation and added to setmodule
* check dacs and trimbits out of range for setmodule (not just threshold)
* binaries in
* m3: pump probe and interpolation mutually exclusive
* minor
* Setting pattern from memory (#218)
* ToString accepts c-style arrays
* fixed patwait time bug in validation
* Introduced pattern class
* compile for servers too
* Python binding for Pattern
* added scanParameters in Python
* slsReceiver: avoid potential memory leak around Implementation::generalData
* additional constructors for scanPrameters in python
* bugfix: avoid potentital memory leak in receiver if called outside constructor context
* added scanParameters in Python
* additional constructors for scanPrameters in python
* M3defaultpattern (#227)
* default pattern for m3 and moench including Python bindings
* M3settings (#228)
* some changes to compile on RH7 and in the server to load the default chip status register at startup
* Updated mythen3DeectorServer_developer executable with correct initialization at startup
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
* Pattern.h as a public header files (#229)
* fixed buffer overflow but caused by using global instead of local enum
* replacing out of range trimbits with edge values
* replacing dac values that are out of range after interpolation
* updated pybind11 to 2.6.2
* Mythen3 improved synchronization (#231)
Disabling scans for multi module Mythen3, since there is no feedback of the detectors being ready
startDetector first starts the slaves then the master
acquire firs calls startDetector for the slaves then acquire on the master
getMaster to read back from hardware which one is master
* New server for JF to go with the new FW (#232)
* Modified Jungfrau speed settings for HW1.0 - FW fix version 1.1.1, compilation date 210218
* Corrected bug. DBIT clk phase is implemented in both HW version 1.0 and 2.0. Previous version did not update the DBIT phase shift on the configuration of a speed.
* fix for m3 scan with single module
* m3 fw version
* m3 server
* bugfix for bottom when setting quad
* new strategy for finding zmq based on cppzmq
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
Co-authored-by: Dhanya Thattil <33750417+thattil@users.noreply.github.com>
Co-authored-by: Alejandro Homs Puron <ahoms@esrf.fr>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
Co-authored-by: Xiaoqiang Wang <xiaoqiangwang@gmail.com>
Co-authored-by: lopez_c <carlos.lopez-cuenca@psi.ch>
* added temp m3 settings files
* renames settings noise to trim
* get threshold for M3
* some changes to compile on RH7 and in the server to load the default chip status register at startup
* Updated mythen3DeectorServer_developer executable with correct initialization at startup
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Anna Bergamaschi <anna.bergamaschi@psi.ch>
