a6144f658e
ctb client and server bug fix: dac didnt compute indices correctly and set dac was not printing in server
2019-06-04 18:11:31 +02:00
3aea917175
updated binaries for the extsig api change
2019-06-04 12:18:06 +02:00
b74ce95b24
removed colon in commands. affects dac, adc and extsig
2019-06-04 12:10:26 +02:00
17f745b45d
ctb server: simulator effects, increased fpga reset time from 1 to 2 seconds
2019-06-03 17:22:59 +02:00
Dhanya Thattil
29141ac1a6
set starting frame number of next acquisition for both jungfrau and e… ( #27 )
...
* set starting frame number of next acquisition for both jungfrau and eiger. firmware has not implemented a get, so workaround. tests included. frame number 0 not allowed due to Eiger. Eiger max frame is 48 bit, while jungfrau is 64 bit
* made argument of setstartingframenumber const
2019-06-03 11:07:53 +02:00
Dhanya Thattil
894cc1c9e0
Simulator ( #28 )
...
* WIP
* wip
* wip
* removed loop
* sending 1 frame
* send multiple frames
* c11 for server
* WIP
* WIP
* Add CMake for the simulators. Requires some refactoring to make slsDetectorServer a proper library.
* Working cmake for jungfrau
* Working cmake for eiger
* WIP
* WIP
* Add preliminary working eiger simulator and breaks the jungfrau simulator
* virtual servers connected
* changes to make it work for rhel7 and install binaries in bin
* removed some unnecessary prints
* removed binaries and virtual makefiles
2019-06-03 10:16:54 +02:00
8c112efdb3
jungfrau bug fix: setting clkdivider also set adcphase: break inswitch
2019-05-28 14:14:08 +02:00
938e1e87ff
bugfix: vref adc voltage
2019-05-28 12:31:19 +02:00
82308daf7b
jungfrau server bug fix: vref adc voltage overwritten by default for ctb
2019-05-28 12:28:44 +02:00
a0f697ce71
jungfrau feature change: outer is default and connects to bottom, inner is secondary but connects to top
2019-05-28 10:31:36 +02:00
2c2fb7358c
jungfrau board 2 adc defines, full speed limitation for old boards
2019-05-27 15:04:13 +02:00
1a1c6b9b42
jungfrau server: feature finish: switching between 2 interfaces
2019-05-17 19:19:03 +02:00
1943e77b24
server interface: ip made to use inet_ntop, mac address and ip to string made common
2019-05-16 15:12:42 +02:00
f90d8c6aff
ctb server: added adcvpp option to get and in mv
2019-05-14 18:38:30 +02:00
45ae8a41ab
updating eiger server
2019-05-14 17:43:34 +02:00
741ee3b44c
ctb server bug fix: udp ip not reset before overwriting (smaller size creates problems)
2019-05-14 17:08:07 +02:00
0904d1db29
updated ctb binary
2019-05-03 20:46:08 +02:00
e14519c236
slsReceiver: removed special receiver config, added rx_dbitlist, rx_dbitoffset to put bits together in file, connected adcinvert, extsamplingsrc and extsampling properly to the detector, added tests
2019-05-03 20:37:40 +02:00
2f3b0e0b06
ctb:separated analog and digital samples in server and send analog and digital data packed separately per frame to reciever
2019-04-30 18:55:32 +02:00
61a939ef53
ctb: removed setroi, instead using adcenablemask
2019-04-26 16:53:23 +02:00
4e3baf41cb
ctb server: introducing 1 us delay between rd strobe and fifo read due to different clocks
2019-04-23 14:35:07 +02:00
3d40fb2d2c
ctb address check, integration test added for ctb pattern
2019-04-18 17:18:01 +02:00
45884a72da
eiger binary updated
2019-04-18 15:35:36 +02:00
266520741a
ctb patterns interface rewritten
2019-04-18 15:29:43 +02:00
79c6f5310b
eiger server and client: cleaning up setting of dynamic range for eiger, where multi client takes care of checking rate correction in a separate call, tests included
2019-04-12 19:20:31 +02:00
89a06f099c
merging refactor (replacing)
2019-04-12 10:53:09 +02:00
