* add patternstart command for CTB, block end of execution udp packets if pattern was started by patternstart command
* update docs
* Dhanya's comments
* more Dhanya comments
* refactored
* fixed tests for startpatttern, also clkfrequency not properly used in server
* xilinx: fixed setfrequency, tick clock (with sync clock), clkfrequency set from getfrequency to get the exact value
* xilinx freq in kHz, updated default values and prints
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* update ctb regDefs, included fill level of adc, transceiver and DBit fifos, added enable registers for cont. readout
* fix fifo fill level range bug
* updated ctb RegDefs, increased size of fifo fill level register
* added register to read the firmware git hash
* ctb: added altchip_id read register
* start with unification of pattern machinery for xctb, ctb, mythen
* udate addrs for d-server internal matterhorn startup
* update xctb reg defs
* move pattern loopdef start
* added zero trimbits to matterhorn config
* Revert "added zero trimbits to matterhorn config"
This reverts commit 7c347badd5.
* added adjustable clocks on Xilinx-CTB
* added support for fractional dividers of runclk
* XCTB: make frequencies adjustable from python gui
* update docs
* added support for patternstart command to XCTB
* XCTB: map pattern_ram directly into memory, removed rw strobe
* refactor Mythen pattern control addresses
* test altera ctb with common addresses, removed ifdefs
* change ordering of regdefs
* updated python help for dbitclk, adcclk and runclk (khz)
* xilinx: moved the wait for firmware to measure the actual frequency to the server side and removed it in the pyctbgui side
* will not be anymore in developer branch
* make format (exception RegisterDefs.h), rewrite XILINX PLL to have less consstants in the code
* bug: mixing && for &
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
- fix acquire fail in tests (adcreg test)
- roi tests fail after overlapping invalid test and acquire after
- print udp dest mac in server properly
- fixed udp dst list get (server was not sending entry proper size to match proper struct size in client)
- updated server binaries and updated hard links in serverBin
- added documentation regarding gui: zmqport and zmqip in terms of gui, rx_zmqstream
- removed print - probably ended there for debuggung
---------
Co-authored-by: Alice <alice.mazzoleni@psi.ch>
* added a 'isValid' member in shared memory (also updated shm version) with default true, any access to shared memory() checks also for validity. any free will set this to false and then unmap shm. Any access to shm will then check validity in python.
* fixed tests for shm
* added tests in python as well
---------
Co-authored-by: Alice <alice.mazzoleni@psi.ch>
readout speed added to json and h5 master files.
Also fixed master file inconsistencies
Sserver binaries
- update server binaries because readoutspeed needs to be sent to receiver with rx_hostname command
API
- added const to Detector class set/getburstmode
Python
- updated python bindings (burstmode const and roi arguments)
Cmd generation
- added pragma once in Caller.in.h as Caller is included in test files
m3: num channels due to #counters < 3
* workaround for m3 for messed up num channels (client always assumes all counters enabled and adds them to num channels), fix for hdf5
g2: exptime master file inconsistency
- exptime didnt match because of round of when setting burst mode (sets to a different clk divider)
- so updating actual time for all timers (exptime, period, subexptime etc, ) in Module class, get timer values from detector when setting it and then send to receiver to write in master file
ctb image size incorrect:
- write actual size into master file and not the reserved size (digital reduces depending on dbit list and dbit offset)
- added a calculate ctb image size free function in generalData.h that is used there as well as for the tests.
master file inconsistencies
- refactored master attributes writing using templates
- names changed to keep it consistent between json and hdf5 master file (Version, Pixels, Exposure Times, GateDelays, Acquisition Period, etc.)
- datatypes changed to keep it simple where possible: imageSize, dynamicRange, tengiga, quad, readnrows, analog, analogsamples, digital, digitalsamples, dbitreorder, dbitoffset, transceivermask, transeiver, transceiversamples, countermask, gates =>int
- replacing "toString" with arrays, objects etc for eg for scan, rois, etc.
- json header always written (empty dataset or empty brackets)
- hdf5 needs const char* so have to convert strings to it, but taking care that strings exist prior to push_back
- master attributes (redundant string literals->error prone
tests for master file
- suppressed deprecated functions in rapidjson warnings just for the tests
- added slsREceiverSoftware/src to allow access to receiver_defs.h to test binary/hdf5 version
- refactored acquire tests by moving all the acquire tests from individual detector type files to a single one=test-Caller-acquire.cpp
- set some default settings (loadBasicSettings) for a basic acquire at load config part for the test_simulator python scripts. so minimum number of settings for detector to be set for any acquire tests.
- added tests to test master files for json and hdf5= test-Caller-master-attributes.cpp
- added option to add '-m' markers for tests using test_simulator python script
* slsSupportLib done, at receiver rooting out in implementation
* removed from receiver and client
* removed everywhere except gui, python and client(commands.yaml and Detector.h)
* updated python
* fixed autocomplete to print what the issue is if there is one with ToString when running the autocomplete script to generate fixed.json. updated readme.md in generator folder
* formatting
* removed enums for dacs
* udpating autocomplete and generating commands
* removed gotthard from docs and release notes
* removed dac test
* bug from removing g1
* fixed virtual test for xilinx, was minor. so in this PR
* gui done
* binary in merge fix
* formatting and removing enums
* updated fixed and dump.json
* bash autocomplete
* updated doc on command line generation
* removing increments in dac enums for backward compatibility. Not required
* removed ROI from rxParameters (only in g1), not needed to be backward compatible
* removed the phase shift option from det server staruip
* updated RegisterDefs.h from firmware update
* Revert "updated RegisterDefs.h from firmware update"
This reverts commit 64f1b2546e.
* updated registers and had it formatted
* Revert "updated registers and had it formatted"
This reverts commit 1641b705b0.
* udpated registers from firmware, reading config file in server (chip config, reset chip, enable_clock_pattern) specific for matterhorn,this is done when powering on chip, removed startreadout, fixed status register bits, updated firmware version
* fix for patioctrl allowed for zxilinx and adding readout pattern for scientists that like to push the acquire button
* fixing default enable clock and readout pattern for xilinx (patioctrl has to be 32 bit)
* Xilinxctb/first image (#1094)
* reduce xilinxCTB readout done checks to single register, increased clockEna pattern limits, clear FPGA FiFos and counters on powerchip, disable counters 1-3 in matterhorn configuration
* change print of xilinxctb server
* remove acquisition done check
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
* binary xilinx in
* formatting
* added reset of udp buffer FIFO to xilinxCTB
---------
Co-authored-by: Martin Mueller <72937414+mmarti04@users.noreply.github.com>
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
* skeleton of structure for callbacks and funcitons updated
* updated callback header structures and implemented in receiver
* fixed bugs
* minor
* formatting
* wip: draft of frame synchronizer, semaphores not done yet
* signal handler not affecting semaphore inside lambda function
* finally works with sem
* install targets cmake error fix
* removed modified callback and instead passing by reference instead of value to the oriignal receiver data callback
* reducing the number of data call backs. incoming from developer
* added json header to receiver start acquiistion call back
* WIP: of synchronisation (#969)
* WIP of synchronisation
* working so far if everything goes right
* added all information into json headers
* valid json
* allow frame synchronizer to have access to static libzmq when compiling on conda (libzeromq-devel not installed by default
* upto date with multirecieverapp for invalid arguments and help
* formatting
* remove warnings
* changes to print
* removed prints
* no need for print frames to be called
* minor
* commnet
* adding json header in start callback, imagesize in data callback and formatted
* startcallback returns an unused int (changed to exceptions and forgotten in last modification to callbacks likely)
* fixed sanitizer issues. 1 left for ctrl+C
- zmq_msg_t should be deleted, not freed. Same with the char arrays and semaphores.
* fixed sanitizer issues and made it more readable
* moving clearing old frames to new startacq just in case it has to process soem frames before the callback
* fix cherry-pick merge of fixing sanitizer thread issues but has start callbacks signature change.fixed
---------
Co-authored-by: Felix Engelmann <felix-github@nlogn.org>
* jf wip: bunch id decoder only in pcb v2.0 check and comments
* auto comp disable the same way for both chip versions. compdisabletime also available for 1.1 now
* fixed tests
* formatting
* binary in
* cli: patwaittime also takes time argument, api: patwaitclocks and patwaitinterval, tcp: patwaitinterval is 2 functions for set and get, patwaitclocks remains a single for backward compatibility with -1 for get, server (loadpattern): clks using member names (needs to be refactored). needs tobe discussed what to do with pattern files.
* all tests passed
* fixed test
* exptime deprecated for ctb and xilinx
* pyctbgui..not there yet
* fixed in pyctbgui
* removed redundant warning for ctb and xilinx exptime in Detector class (already in module class handling all exptime signatures), patwait, patloop and patnloop have to be non inferrable commands because of support for old commands (level as suffix)
* fix formatting error from command line parsing
* fix tests for patwaittime
