* add patternstart command for CTB, block end of execution udp packets if pattern was started by patternstart command
* update docs
* Dhanya's comments
* more Dhanya comments
* refactored
* fixed tests for startpatttern, also clkfrequency not properly used in server
* xilinx: fixed setfrequency, tick clock (with sync clock), clkfrequency set from getfrequency to get the exact value
* xilinx freq in kHz, updated default values and prints
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* update ctb regDefs, included fill level of adc, transceiver and DBit fifos, added enable registers for cont. readout
* fix fifo fill level range bug
* updated ctb RegDefs, increased size of fifo fill level register
* added register to read the firmware git hash
* ctb: added altchip_id read register
* start with unification of pattern machinery for xctb, ctb, mythen
* udate addrs for d-server internal matterhorn startup
* update xctb reg defs
* move pattern loopdef start
* added zero trimbits to matterhorn config
* Revert "added zero trimbits to matterhorn config"
This reverts commit 7c347badd5.
* added adjustable clocks on Xilinx-CTB
* added support for fractional dividers of runclk
* XCTB: make frequencies adjustable from python gui
* update docs
* added support for patternstart command to XCTB
* XCTB: map pattern_ram directly into memory, removed rw strobe
* refactor Mythen pattern control addresses
* test altera ctb with common addresses, removed ifdefs
* change ordering of regdefs
* updated python help for dbitclk, adcclk and runclk (khz)
* xilinx: moved the wait for firmware to measure the actual frequency to the server side and removed it in the pyctbgui side
* will not be anymore in developer branch
* make format (exception RegisterDefs.h), rewrite XILINX PLL to have less consstants in the code
* bug: mixing && for &
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* removed verify, update, fixed getUser to be a free function, generated commands, python bindings yet to do
* python bindings
* fixed tests
* minor
* minor
* format
readout speed added to json and h5 master files.
Also fixed master file inconsistencies
Sserver binaries
- update server binaries because readoutspeed needs to be sent to receiver with rx_hostname command
API
- added const to Detector class set/getburstmode
Python
- updated python bindings (burstmode const and roi arguments)
Cmd generation
- added pragma once in Caller.in.h as Caller is included in test files
m3: num channels due to #counters < 3
* workaround for m3 for messed up num channels (client always assumes all counters enabled and adds them to num channels), fix for hdf5
g2: exptime master file inconsistency
- exptime didnt match because of round of when setting burst mode (sets to a different clk divider)
- so updating actual time for all timers (exptime, period, subexptime etc, ) in Module class, get timer values from detector when setting it and then send to receiver to write in master file
ctb image size incorrect:
- write actual size into master file and not the reserved size (digital reduces depending on dbit list and dbit offset)
- added a calculate ctb image size free function in generalData.h that is used there as well as for the tests.
master file inconsistencies
- refactored master attributes writing using templates
- names changed to keep it consistent between json and hdf5 master file (Version, Pixels, Exposure Times, GateDelays, Acquisition Period, etc.)
- datatypes changed to keep it simple where possible: imageSize, dynamicRange, tengiga, quad, readnrows, analog, analogsamples, digital, digitalsamples, dbitreorder, dbitoffset, transceivermask, transeiver, transceiversamples, countermask, gates =>int
- replacing "toString" with arrays, objects etc for eg for scan, rois, etc.
- json header always written (empty dataset or empty brackets)
- hdf5 needs const char* so have to convert strings to it, but taking care that strings exist prior to push_back
- master attributes (redundant string literals->error prone
tests for master file
- suppressed deprecated functions in rapidjson warnings just for the tests
- added slsREceiverSoftware/src to allow access to receiver_defs.h to test binary/hdf5 version
- refactored acquire tests by moving all the acquire tests from individual detector type files to a single one=test-Caller-acquire.cpp
- set some default settings (loadBasicSettings) for a basic acquire at load config part for the test_simulator python scripts. so minimum number of settings for detector to be set for any acquire tests.
- added tests to test master files for json and hdf5= test-Caller-master-attributes.cpp
- added option to add '-m' markers for tests using test_simulator python script
* slsSupportLib done, at receiver rooting out in implementation
* removed from receiver and client
* removed everywhere except gui, python and client(commands.yaml and Detector.h)
* updated python
* fixed autocomplete to print what the issue is if there is one with ToString when running the autocomplete script to generate fixed.json. updated readme.md in generator folder
* formatting
* removed enums for dacs
* udpating autocomplete and generating commands
* removed gotthard from docs and release notes
* removed dac test
* bug from removing g1
* fixed virtual test for xilinx, was minor. so in this PR
* gui done
* binary in merge fix
* formatting and removing enums
* updated fixed and dump.json
* bash autocomplete
* updated doc on command line generation
* removing increments in dac enums for backward compatibility. Not required
* removed ROI from rxParameters (only in g1), not needed to be backward compatible
* removed the phase shift option from det server staruip
* udpated help on multi module and multi command help
* fixed issues with empty lines and other syntax with docuemntation
* fixed some warningsin documentation
* some changes to documentation about command line usage
* minor
* jf wip: bunch id decoder only in pcb v2.0 check and comments
* auto comp disable the same way for both chip versions. compdisabletime also available for 1.1 now
* fixed tests
* formatting
* binary in
* cli: patwaittime also takes time argument, api: patwaitclocks and patwaitinterval, tcp: patwaitinterval is 2 functions for set and get, patwaitclocks remains a single for backward compatibility with -1 for get, server (loadpattern): clks using member names (needs to be refactored). needs tobe discussed what to do with pattern files.
* all tests passed
* fixed test
* exptime deprecated for ctb and xilinx
* pyctbgui..not there yet
* fixed in pyctbgui
* removed redundant warning for ctb and xilinx exptime in Detector class (already in module class handling all exptime signatures), patwait, patloop and patnloop have to be non inferrable commands because of support for old commands (level as suffix)
* fix formatting error from command line parsing
* fix tests for patwaittime
* docs receiver formats rewrite
* added documentation for all the receiver files, updated release notes, udpated help in commands help for timing, fixed by throwing exception for aa dividy by 0 error caused by not freeing memory (detsize) when switching between 1d and 2d detectors, removed unnecessary 'recevier up' printout, fixed dbit list 64 bit mask error in master json file (was not 64 bit before), fixed bug in reading gotthard1 data (needs to be tested)
* generating commands help and formatting, also fix help for trimen command line
* added ctb frame format documentation, added some links to some commands, added documentation about adding expat-devel in installation for rhel8 gui, fixed some indentation issues that screwed up command line help documentation
* added ctb frame format documentation
* updated documentation about zeromq-devel for <8.0.0 versions
* fixed the gendoc to reflect the new parser, updated documentation to include info about autocomplete in the command line part, error in createing docs
* fixed list deprecated, fixed command help (to show properly on a html, fixed other help warnings
* minor indents
---------
Co-authored-by: Erik Fröjdh <erik.frojdh@gmail.com>
* first draft of fixing the free function available within the class
* removed class member function freeSharedmemory for both Detector and Module; made the free function freeSharedmemory accessible to python interface; setHostname if there is already a module in shm will recreate the Detector object while freeing shm completely and keeping detsize and intitialchecks (previous commit), sethostname called from DetectorClass in virtual command to have one point of entry (previous commit), testing Module class frees shared memory using free function
* Detector class: added copy and move constructor and assignmentoperators due to explicit destructor (DetectorImpl fwd declared), DetectorImpl class: included ZmqSocket to remove destructor (should not be virtual in any case), Module class: removed explciit destructor to allow compiler generated constructor and operators
* formatting
* minor fix for readme autocomplete
* updated client version date
* get/set next frame number in G2 (firmware only has set, no get)
* firmware has issues: each stop keeps 2 frame header in fifo and the resetting frame number happens after that
* removed the option to set burstmode to burst external or continuwous internal
* needs to be revisited before 9.0.0
* added readoutspeed command to m3 (fullspeed - 10, half speed - 20, quarter speed - 40), removed reaodut pll, moved up system pll clock indices, leaving pll index in common altera code, default speed is half speed, allow only system_c0 to be set, the others can be obtained, same for clkphase, maxclkphaseshift, clkfreq. added to readoutspeedlist commands, updated help and updated tests
* updated readoutspeedlist command
- do not validate write reg, setbit and clearbit by default anymore
- --validate will force validation on the bitmask or entire reg
- remove return value for write reg (across server to client, but thankfully not in the Detector class)
- extend validation into writereg, setbit and clearbit for Eiger (always special)
- need to check python (TODO)
- missed the rx_zmqip implementations in detector.h and python bindings
* enable ipv6 in zmq socket
* removed rx_zmqip API and field in gui, changed client updaterxrzip to updateclientzmqip to have the rx_hostname ip if 0.
* updated command line for rx_zmqip to give a warning.
* Replaced 'depreciated' to 'deprecated' everywhere
* switching from * to 0.0.0.0 works for rebinding zmq sockets
* fixed help in command line for rx_zmqip * to 0.0.0.0 and removed cmd in python
* remove publisher zmq socket ip also for moench post processing
* fixed tests
* publisher zmq ip macros to be reused
* moench (feature to wait for post processing to be done in new sls_detector_acquire_zmq executable)
READOUT_ACTION_ZMQ added to action enums
sls_detector_acquire_zmq added to executables
empty data call back so that client listens to last dummy zmq packet from moench post processor
processor: remove NEWZMQ ifdefs and remove connect for zmq publisher socket
* fix to compile
* cmds generated and parsed
* period and exptime(patternwaittime level 0)
* added new regsieterdefs and updated api version and fixedpattern reg
* autogenerate commands
* formatting
* minor
* wip resetflow, readout mode, transceiver mask, transceiver enable
* acquisition, but streaming done bit and busy (exposing + read chip to fifo) not known yet from fw
* programming fpga and device tree done
* most configuration done, need to connect configuretransceiver to client
* stuck at resetting transciever timed out
* minor
* fixed virtual, added chip busyto fifo, streaming busy, set/getnext framenumber
* configuretransceiver from client, added help in client
* make formatt and command generation
* tests for xilinx ctb works
* command generation
* dacs added and tested, power not done
* power added
* added temp_fpga
* binaries in
* ctrlreg is 0 to enable chip=fixed, high dac val = min val= fixed, power regulators in weird order=fixed, device tree could be loaded with dacs before adcs=fixed
* start works
* virtual server sends
* receiver works
* tests
* python function and enum generation, commands generatorn and autocomplete, formatting, tests
* tests fail at start(transceiver not aligned)
* tests passed
* all binaries compiled
* eiger binary in
* added --nomodule cehck for xilinx
* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* connected kernelversion, hardwareversion, versions, framesl, triggersl, dr, timingmode, pattern (except patioctrl) thats there for altera ctb
* replaced set/get64Bit to set/getU64bit in all loadpattern.c for (ctb and m3 also)
* updated registers, arm64
* compiler set to aarch64 for xilinx server
* updated RegisterDefs.h
* merge into generate branch and resolving conflicts and adding the xilinx changes to callerspecial and commands.yaml
* compiles and can print firmware version (using a different csp0 address)
* fixing other servers (gotthard, jungfrau, moench, mythen3) that it returns in case of mapping failure, xilinxctb: added that it checks type, prints proper fw version, checks kernel date, added armprocessor define to use in common places, added specifiers to supress overflow and truncation warnings
* added detector ip and mac adddress to the printout
* fixed tests and recompiled servers
* replacing detp with sls_Detector_put and detg with sls_detector_get
* sls_detector_not implemented, but extended message to ask user to use sls_detector_get or sls_detector_put
* autocompletion also for sls_detector or det
* commands code generation (#803)
* commands code generation for only frames command
* fix cmake file and add Caller files
* working exptime, fully extended commands file and its variants
* start adding template commands
* add INT_CMD_VEC_ID template
* add list command, generate multiple bins, format code
* reach 208 commands using the cpp macros
* add tests for command parser
* start adding tests for commands parser
* fix typo to use commands.yaml
* add more tests for command_parser
* add all template functions (up to 218 commands)
* finish template functions and add more CmdProxy.cpp functions (250+)
* 257 commands
* 300 commands the rest are very special commands
* add special commands without generation
* separate special functions from generated c++ file
* implementing one command for put and get (buggy)
* add infer action in a separate file
* generate header for special commands from yaml
* allow only 0 or 1 for bool inputs
* group all commands in gen_commands.py
* add help to gen_commands.py
* add autocomplete bash script
* autocompletion: add support for module levels and help
* remove debugging line
* add autocompletion, help to commands, change int [0,1] to bool
* copy tests for Caller.cpp. Tests pass
* update with the new developer branch changes
* fix errors after merging (there is problems with tests)
* fixed port/stopport in yaml (intput typo), added '_caller' to the test dac and test on chip dac command in global test for cmdcaller
* undo previous test simulator debug change
* add documentation for the generated code
* reducing the comment to be replaced in length so formatting does not split into 2 lines
* removed formatting specific style of C++11 in gen_commands.py to keep with the top level clang format of the project
* regeneratign code for commands
* automation generated
* Redirect deprecated commands (#872)
* working implementation, need to fix dac
* fixed deprecation redirect for dac command
* Detector specific autocomplete (#873)
* working implementation, need to fix dac
* fixed deprecation redirect for dac command
* detector specific completion for dac
* added autocomplete using detector specific
* fixed error when autocompleting partial words
* Generate commands/fix commands (#875)
* fix vm_a, im_a etc have deg Celsius suffix, also help missing or changed in some places
* dac: require det id for all, arg0 to be printed at output, help for onchip dac and dac, onchipdac: spacing
* getscan detid and blocking trigger help
* udp_Dstlist det_id fixed, but rx_id invalid
* cmdApp in line with cmdLineApp (missing version, receiver_id, not creating det object in help action
* added set_command to differentiate between check_det_id and require_det_id (mixed up), args: -1 needs to check for at least one argument
* reordering
* reordering and checked till integer_command_hex
* fixed a lot more commands
* fix caller tests for eiger
* changes to tests after Bechir left
* changing .cmd to .cmdcall for the caller commands
* fixed tests for caller, still warning for setexptime about cast input
* autocomplete ran
* add moench test
* regenerating autocomplete and commands
* fixing other things from merge conflicts (renaming slsDetectorDefs to defs in commands.yaml)
* formatting
* added code injection to help (#876)
* updated 3 commands to have get output that can be put into put (#877)
* updated some commands to have get output that can be put into put
* fix tests for clkdiv
* adding help to free (#878)
* removing old commands and renaming them, (also making it work for parameters command as it was still calling cmdproxy) (#879)
* More helpful error messages for unsupported actions (#880)
* removing old commands and renaming them, (also making it work for parameters command as it was still calling cmdproxy)
* Added specific help for unsupported actions
* fixed a vetofile get special exception message. more specific warning for special exception message instead of no function warning
* added condition checking true in exceptions for special message
---------
Co-authored-by: Bechir Brahem <bachbrahem@gmail.com>
Co-authored-by: Erik Frojdh <erik.frojdh@gmail.com>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
