* add patternstart command for CTB, block end of execution udp packets if pattern was started by patternstart command
* update docs
* Dhanya's comments
* more Dhanya comments
* refactored
* fixed tests for startpatttern, also clkfrequency not properly used in server
* xilinx: fixed setfrequency, tick clock (with sync clock), clkfrequency set from getfrequency to get the exact value
* xilinx freq in kHz, updated default values and prints
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* update ctb regDefs, included fill level of adc, transceiver and DBit fifos, added enable registers for cont. readout
* fix fifo fill level range bug
* updated ctb RegDefs, increased size of fifo fill level register
* added register to read the firmware git hash
* ctb: added altchip_id read register
* start with unification of pattern machinery for xctb, ctb, mythen
* udate addrs for d-server internal matterhorn startup
* update xctb reg defs
* move pattern loopdef start
* added zero trimbits to matterhorn config
* Revert "added zero trimbits to matterhorn config"
This reverts commit 7c347badd5.
* added adjustable clocks on Xilinx-CTB
* added support for fractional dividers of runclk
* XCTB: make frequencies adjustable from python gui
* update docs
* added support for patternstart command to XCTB
* XCTB: map pattern_ram directly into memory, removed rw strobe
* refactor Mythen pattern control addresses
* test altera ctb with common addresses, removed ifdefs
* change ordering of regdefs
* updated python help for dbitclk, adcclk and runclk (khz)
* xilinx: moved the wait for firmware to measure the actual frequency to the server side and removed it in the pyctbgui side
* will not be anymore in developer branch
* make format (exception RegisterDefs.h), rewrite XILINX PLL to have less consstants in the code
* bug: mixing && for &
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* removed verify, update, fixed getUser to be a free function, generated commands, python bindings yet to do
* python bindings
* fixed tests
* minor
* minor
* format
readout speed added to json and h5 master files.
Also fixed master file inconsistencies
Sserver binaries
- update server binaries because readoutspeed needs to be sent to receiver with rx_hostname command
API
- added const to Detector class set/getburstmode
Python
- updated python bindings (burstmode const and roi arguments)
Cmd generation
- added pragma once in Caller.in.h as Caller is included in test files
m3: num channels due to #counters < 3
* workaround for m3 for messed up num channels (client always assumes all counters enabled and adds them to num channels), fix for hdf5
g2: exptime master file inconsistency
- exptime didnt match because of round of when setting burst mode (sets to a different clk divider)
- so updating actual time for all timers (exptime, period, subexptime etc, ) in Module class, get timer values from detector when setting it and then send to receiver to write in master file
ctb image size incorrect:
- write actual size into master file and not the reserved size (digital reduces depending on dbit list and dbit offset)
- added a calculate ctb image size free function in generalData.h that is used there as well as for the tests.
master file inconsistencies
- refactored master attributes writing using templates
- names changed to keep it consistent between json and hdf5 master file (Version, Pixels, Exposure Times, GateDelays, Acquisition Period, etc.)
- datatypes changed to keep it simple where possible: imageSize, dynamicRange, tengiga, quad, readnrows, analog, analogsamples, digital, digitalsamples, dbitreorder, dbitoffset, transceivermask, transeiver, transceiversamples, countermask, gates =>int
- replacing "toString" with arrays, objects etc for eg for scan, rois, etc.
- json header always written (empty dataset or empty brackets)
- hdf5 needs const char* so have to convert strings to it, but taking care that strings exist prior to push_back
- master attributes (redundant string literals->error prone
tests for master file
- suppressed deprecated functions in rapidjson warnings just for the tests
- added slsREceiverSoftware/src to allow access to receiver_defs.h to test binary/hdf5 version
- refactored acquire tests by moving all the acquire tests from individual detector type files to a single one=test-Caller-acquire.cpp
- set some default settings (loadBasicSettings) for a basic acquire at load config part for the test_simulator python scripts. so minimum number of settings for detector to be set for any acquire tests.
- added tests to test master files for json and hdf5= test-Caller-master-attributes.cpp
- added option to add '-m' markers for tests using test_simulator python script
* slsSupportLib done, at receiver rooting out in implementation
* removed from receiver and client
* removed everywhere except gui, python and client(commands.yaml and Detector.h)
* updated python
* fixed autocomplete to print what the issue is if there is one with ToString when running the autocomplete script to generate fixed.json. updated readme.md in generator folder
* formatting
* removed enums for dacs
* udpating autocomplete and generating commands
* removed gotthard from docs and release notes
* removed dac test
* bug from removing g1
* fixed virtual test for xilinx, was minor. so in this PR
* gui done
* binary in merge fix
* formatting and removing enums
* updated fixed and dump.json
* bash autocomplete
* updated doc on command line generation
* removing increments in dac enums for backward compatibility. Not required
* removed ROI from rxParameters (only in g1), not needed to be backward compatible
* removed the phase shift option from det server staruip
* jf wip: bunch id decoder only in pcb v2.0 check and comments
* auto comp disable the same way for both chip versions. compdisabletime also available for 1.1 now
* fixed tests
* formatting
* binary in
* cli: patwaittime also takes time argument, api: patwaitclocks and patwaitinterval, tcp: patwaitinterval is 2 functions for set and get, patwaitclocks remains a single for backward compatibility with -1 for get, server (loadpattern): clks using member names (needs to be refactored). needs tobe discussed what to do with pattern files.
* all tests passed
* fixed test
* exptime deprecated for ctb and xilinx
* pyctbgui..not there yet
* fixed in pyctbgui
* removed redundant warning for ctb and xilinx exptime in Detector class (already in module class handling all exptime signatures), patwait, patloop and patnloop have to be non inferrable commands because of support for old commands (level as suffix)
* fix formatting error from command line parsing
* fix tests for patwaittime
* first draft of fixing the free function available within the class
* removed class member function freeSharedmemory for both Detector and Module; made the free function freeSharedmemory accessible to python interface; setHostname if there is already a module in shm will recreate the Detector object while freeing shm completely and keeping detsize and intitialchecks (previous commit), sethostname called from DetectorClass in virtual command to have one point of entry (previous commit), testing Module class frees shared memory using free function
* Detector class: added copy and move constructor and assignmentoperators due to explicit destructor (DetectorImpl fwd declared), DetectorImpl class: included ZmqSocket to remove destructor (should not be virtual in any case), Module class: removed explciit destructor to allow compiler generated constructor and operators
* formatting
* minor fix for readme autocomplete
* updated client version date
* get/set next frame number in G2 (firmware only has set, no get)
* firmware has issues: each stop keeps 2 frame header in fifo and the resetting frame number happens after that
* removed the option to set burstmode to burst external or continuwous internal
* needs to be revisited before 9.0.0
* added readoutspeed command to m3 (fullspeed - 10, half speed - 20, quarter speed - 40), removed reaodut pll, moved up system pll clock indices, leaving pll index in common altera code, default speed is half speed, allow only system_c0 to be set, the others can be obtained, same for clkphase, maxclkphaseshift, clkfreq. added to readoutspeedlist commands, updated help and updated tests
* updated readoutspeedlist command
- do not validate write reg, setbit and clearbit by default anymore
- --validate will force validation on the bitmask or entire reg
- remove return value for write reg (across server to client, but thankfully not in the Detector class)
- extend validation into writereg, setbit and clearbit for Eiger (always special)
- need to check python (TODO)
- missed the rx_zmqip implementations in detector.h and python bindings
* period and exptime(patternwaittime level 0)
* added new regsieterdefs and updated api version and fixedpattern reg
* autogenerate commands
* formatting
* minor
* wip resetflow, readout mode, transceiver mask, transceiver enable
* acquisition, but streaming done bit and busy (exposing + read chip to fifo) not known yet from fw
* programming fpga and device tree done
* most configuration done, need to connect configuretransceiver to client
* stuck at resetting transciever timed out
* minor
* fixed virtual, added chip busyto fifo, streaming busy, set/getnext framenumber
* configuretransceiver from client, added help in client
* make formatt and command generation
* tests for xilinx ctb works
* command generation
* dacs added and tested, power not done
* power added
* added temp_fpga
* binaries in
* ctrlreg is 0 to enable chip=fixed, high dac val = min val= fixed, power regulators in weird order=fixed, device tree could be loaded with dacs before adcs=fixed
* start works
* virtual server sends
* receiver works
* tests
* python function and enum generation, commands generatorn and autocomplete, formatting, tests
* tests fail at start(transceiver not aligned)
* tests passed
* all binaries compiled
* eiger binary in
* added --nomodule cehck for xilinx
