detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-04-24 23:30:03 +02:00
Code Issues Actions Packages Releases Activity

Merge branch '2.3' into developer

Browse Source
This commit is contained in:
Gemma Tinti 2017-03-29 11:25:28 +02:00
commit faefcc4799
1 changed files with 33 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
manual/manual-client/Eiger_short.tex
View File

@ -70,9 +70,39 @@ To do that:
\begin{verbatim}
sls_detector_put 0-config mydetector.config
\end{verbatim}
Refer to sample configuration files to produce the appropriate one for your detector.
\underline{In the case of cSAXS the {\tt{mydetector.config}} *at present* is:}\\
\underline{/sls/X12SA/data/x12saop/EigerPackage/beb\_1.5M\_1Gb\_fiber.config}
In the config file, if client, receiver and detector are using \textbf{1GbE} the following lines are mandatory:
\begin{verbatim}
detsizechan 1024 512 #detetctor geometry, long side of the module first
hostname beb059+beb058+ #1Gb detector hostname for controls
0:rx_tcpport 1991 #tcpport for the first halfmodule
0:rx_udpport 50011 #udp port first quadrant, first halfmodule
0:rx_udpport2 50012 #udp port second quadrant, first halfmodule
1:rx_tcpport 1992 #tcpport for the second halfmodule
1:rx_udpport 50013 #udp port first quadrant, second halfmodule
1:rx_udpport2 50014 #udp port second quadrant, second halfmodule
rx_hostname x12sa-vcons #1Gb receiver pc hostname
outdir /sls/X12SA/data/x12saop/Data10/Eiger0.5M
\end{verbatim}
In the config file, if client, receiver and detector commands are on 1Gb, but detector data to receiver are sent using \textbf{10GbE} the following lines are mandatory:
\begin{verbatim}
detsizechan 1024 512 #detetctor geometry, long side of the module first
hostname beb059+beb058+ #1Gb detector hostname for controls
0:rx_tcpport 1991 #tcpport for the first halfmodule
0:rx_udpport 50011 #udp port first quadrant, first halfmodule
0:rx_udpport2 50012 #udp port second quadrant, first halfmodule
0:rx_udpip 10.0.30.210 #udp IP of the receiver over 10Gb
0:detectorip 10.0.30.100 #first half module 10 Gb IP
1:rx_tcpport 1992 #tcpport for the second halfmodule
1:rx_udpport 50013 #udp port first quadrant, second halfmodule
1:rx_udpport2 50014 #udp port second quadrant, second halfmodule
1:rx_udpip 10.0.40.210 #udp IP of the receiver over 10Gb,
can be the same or different from 0:rx_udpip
1:detectorip 10.0.40.101 #second half module 10 Gb IP
rx_hostname x12sa-vcons #1Gb receiver pc hostname
outdir /sls/X12SA/data/x12saop/Data10/Eiger0.5M
\end{verbatim}
One can configure all the detector settings in a parameter file {\tt{setup.det}}, which is loaded by doing:
\begin{verbatim}