detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-06-14 22:07:12 +02:00
Code Issues Actions Packages Releases Activity

M3threshold (#475)

Browse Source 
* vicin default changed to 800, only setting vthx directly allows to set dac even if counter disabled, else disable counter, setallthresholdenergy if an energy is -1, get module value, fix that reg was repaced by isettings

* vth3 disabled for interpolation enable, interpolation disable sets counter mask to what it was before (updating old mask whn setting counter mask except for setting all counters for interpolation enable) and enabling vth3 if counter was enabled

* refactor and test for previous commit

* pump probe only has vth2 enabled, handles both pump probe mode and interpolation mode as well

* wip

* refactored pump probe and interpolation and added to setmodule

* check dacs and trimbits out of range for setmodule (not just threshold)

* binaries in

* m3: pump probe and interpolation mutually exclusive

* minor
This commit is contained in:
Dhanya Thattil
2022-06-07 16:55:33 +02:00
committed by GitHub
parent 25b5b02302
commit 1fb90ab98c
14 changed files with 335 additions and 227 deletions
Download Patch File Download Diff File Expand all files Collapse all files

197
slsDetectorSoftware/src/Module.cpp
View File

@ -173,7 +173,9 @@ std::array<int, 3> Module::getAllThresholdEnergy() const {
void Module::setThresholdEnergy(int e_eV, detectorSettings isettings,
bool trimbits) {
if (shm()->detType == MYTHEN3) {
throw RuntimeError("Mythen3 should have called with 3 energies");
}
// verify e_eV exists in trimEneregies[]
if (shm()->trimEnergies.empty() || (e_eV < shm()->trimEnergies.front()) ||
(e_eV > shm()->trimEnergies.back())) {
@ -214,21 +216,9 @@ void Module::setThresholdEnergy(int e_eV, detectorSettings isettings,
myMod.iodelay = myMod1.iodelay;
myMod.tau =
linearInterpolation(e_eV, trim1, trim2, myMod1.tau, myMod2.tau);
// m3, reg is used for gaincaps
if (shm()->detType == MYTHEN3) {
if (myMod1.reg != myMod2.reg) {
throw RuntimeError(
"setThresholdEnergyAndSettings: gaincaps do not "
"match between files");
}
myMod.reg = myMod1.reg;
}
}
// m3, reg is used for gaincaps
if (shm()->detType != MYTHEN3) {
myMod.reg = isettings;
}
myMod.reg = isettings;
myMod.eV[0] = e_eV;
setModule(myMod, trimbits);
if (getSettings() != isettings) {
@ -243,42 +233,35 @@ void Module::setThresholdEnergy(int e_eV, detectorSettings isettings,
void Module::setAllThresholdEnergy(std::array<int, 3> e_eV,
detectorSettings isettings, bool trimbits) {
// only mythen3
if (shm()->detType != MYTHEN3) {
throw RuntimeError("This detector should have called with 3 energies");
}
if (shm()->trimEnergies.empty()) {
throw RuntimeError(
"Trim energies have not been defined for this module yet!");
"Trim energies have not been defined for this module yet! Use trimen.");
}
auto counters = getSetBits(getCounterMask());
enum mythen3_DacIndex {
M_VCASSH,
M_VTH2,
M_VRSHAPER,
M_VRSHAPER_N,
M_VIPRE_OUT,
M_VTH3,
M_VTH1,
M_VICIN,
M_VCAS,
M_VRPREAMP,
M_VCAL_N,
M_VIPRE,
M_VISHAPER,
M_VCAL_P,
M_VTRIM,
M_VDCSH
};
std::vector<sls_detector_module> myMods{shm()->detType};
std::vector<int> energy(e_eV.begin(), e_eV.end());
// if all energies are same
if (allEqualTo(energy, energy[0])) {
if (energy[0] == -1) {
throw RuntimeError("Every energy provided to set threshold energy is -1. Typo?");
}
energy.resize(1);
}
myMods.resize(energy.size());
// for each threshold
std::vector<sls_detector_module> myMods;
for (size_t i = 0; i < energy.size(); ++i) {
if (energy[i] == -1) {
sls_detector_module mod = getModule();
myMods.push_back(mod);
continue;
}
sls_detector_module mod{shm()->detType};
myMods.push_back(mod);
// don't interpolate
if (shm()->trimEnergies.anyEqualTo(energy[i])) {
std::string settingsfname =
@ -324,10 +307,9 @@ void Module::setAllThresholdEnergy(std::array<int, 3> e_eV,
myMods[i] = interpolateTrim(&myMod1, &myMod2, energy[i], trim1,
trim2, trimbits);
// gaincaps
// csr
if (myMod1.reg != myMod2.reg) {
throw RuntimeError("setAllThresholdEnergy: gaincaps do not "
"match between files for energy (eV) " +
throw RuntimeError("setAllThresholdEnergy: chip shift register values do not match between files for energy (eV) " +
std::to_string(energy[i]));
}
myMods[i].reg = myMod1.reg;
@ -337,8 +319,11 @@ void Module::setAllThresholdEnergy(std::array<int, 3> e_eV,
sls_detector_module myMod{shm()->detType};
myMod = myMods[0];
// if multiple thresholds, combine
if (myMods.size() > 1) {
auto counters = getSetBits(getCounterMask());
// average vtrim of enabled counters
int sum = 0;
@ -377,56 +362,15 @@ void Module::setAllThresholdEnergy(std::array<int, 3> e_eV,
for (int i = 0; i < myMod.nchan; ++i) {
myMod.chanregs[i] = myMods[i % 3].chanregs[i];
}
// gain caps
// csr
if (myMods[0].reg != myMods[1].reg || myMods[1].reg != myMods[2].reg) {
throw RuntimeError("setAllThresholdEnergy: gaincaps do not "
"match between files for all energies");
throw RuntimeError("setAllThresholdEnergy: chip shift register values do not match between files for all energies");
}
}
myMod.reg = isettings;
std::copy(e_eV.begin(), e_eV.end(), myMod.eV);
LOG(logDEBUG) << "ev:" << ToString(myMod.eV);
// check for trimbits that are out of range
bool out_of_range = false;
for (int i = 0; i != myMod.nchan; ++i) {
if (myMod.chanregs[i] < 0) {
myMod.chanregs[i] = 0;
out_of_range = true;
} else if (myMod.chanregs[i] > 63) {
myMod.chanregs[i] = 63;
out_of_range = true;
}
}
if (out_of_range) {
LOG(logWARNING)
<< "Some trimbits were out of range after interpolation, these "
"have been replaced with 0 or 63.";
}
// check dacs
out_of_range = false;
for (int i = 0; i != myMod.ndac; ++i) {
int dacMin = 0;
int dacMax = 2800;
if (i == M_VTH1 || i == M_VTH2 || i == M_VTH3) {
dacMin = 200;
dacMax = 2400;
}
if (myMod.dacs[i] < dacMin) {
myMod.dacs[i] = dacMin;
out_of_range = true;
} else if (myMod.dacs[i] > dacMax) {
myMod.dacs[i] = dacMax;
out_of_range = true;
}
}
if (out_of_range) {
LOG(logWARNING) << "Some dacs were out of range after interpolation, "
"these have been replaced with 600 or 2400.";
}
setModule(myMod, trimbits);
if (getSettings() != isettings) {
throw RuntimeError("setThresholdEnergyAndSettings: Could not set "
@ -2252,10 +2196,8 @@ uint32_t Module::getCounterMask() const {
}
void Module::setCounterMask(uint32_t countermask) {
LOG(logDEBUG1) << "Setting Counter mask to " << countermask;
sendToDetector(F_SET_COUNTER_MASK, countermask, nullptr);
if (shm()->useReceiverFlag) {
LOG(logDEBUG1) << "Sending Reciver counter mask: " << countermask;
sendToReceiver(F_RECEIVER_SET_COUNTER_MASK, countermask, nullptr);
}
}
@ -2315,7 +2257,10 @@ bool Module::getInterpolation() const {
void Module::setInterpolation(const bool enable) {
sendToDetector(F_SET_INTERPOLATION, static_cast<int>(enable), nullptr);
setCounterMask(getCounterMask());
int mask = getCounterMask();
if (shm()->useReceiverFlag) {
sendToReceiver(F_RECEIVER_SET_COUNTER_MASK, mask, nullptr);
}
}
bool Module::getPumpProbe() const {
@ -2398,12 +2343,9 @@ int Module::getNumberOfDigitalSamples() const {
}
void Module::setNumberOfDigitalSamples(int value) {
LOG(logDEBUG1) << "Setting number of digital samples to " << value;
sendToDetector(F_SET_NUM_DIGITAL_SAMPLES, value, nullptr);
updateNumberOfChannels(); // depends on samples and adcmask
if (shm()->useReceiverFlag) {
LOG(logDEBUG1) << "Sending number of digital samples to Receiver: "
<< value;
sendToReceiver(F_RECEIVER_SET_NUM_DIGITAL_SAMPLES, value, nullptr);
}
}
@ -3338,6 +3280,45 @@ void Module::setModule(sls_detector_module &module, bool trimbits) {
module.nchan = 0;
module.nchip = 0;
}
// validate dacs and trimbits
if (shm()->detType == MYTHEN3) {
// check for trimbits that are out of range
bool out_of_range = false;
for (int i = 0; i != module.nchan; ++i) {
if (module.chanregs[i] < 0) {
module.chanregs[i] = 0;
out_of_range = true;
} else if (module.chanregs[i] > 63) {
module.chanregs[i] = 63;
out_of_range = true;
}
}
if (out_of_range) {
LOG(logWARNING)
<< "Some trimbits were out of range, these have been replaced with 0 or 63.";
}
// check dacs
out_of_range = false;
for (int i = 0; i != module.ndac; ++i) {
int dacMin = 0;
int dacMax = 2800;
if (i == M_VTH1 || i == M_VTH2 || i == M_VTH3) {
dacMin = 200;
dacMax = 2400;
}
if (module.dacs[i] < dacMin) {
module.dacs[i] = dacMin;
out_of_range = true;
} else if (module.dacs[i] > dacMax) {
module.dacs[i] = dacMax;
out_of_range = true;
}
}
if (out_of_range) {
LOG(logWARNING) << "Some dacs were out of range, "
"these have been replaced with 0/200 or 2800/2400.";
}
}
auto client = DetectorSocket(shm()->hostname, shm()->controlPort);
client.Send(F_SET_MODULE);
sendModule(&module, client);
@ -3469,42 +3450,6 @@ sls_detector_module Module::interpolateTrim(sls_detector_module *a,
}
sls_detector_module myMod{shm()->detType};
enum eiger_DacIndex {
E_SVP,
E_VTR,
E_VRF,
E_VRS,
E_SVN,
E_VTGSTV,
E_VCMP_LL,
E_VCMP_LR,
E_CAL,
E_VCMP_RL,
E_RXB_RB,
E_RXB_LB,
E_VCMP_RR,
E_VCP,
E_VCN,
E_VIS
};
enum mythen3_DacIndex {
M_VCASSH,
M_VTH2,
M_VRSHAPER,
M_VRSHAPER_N,
M_VIPRE_OUT,
M_VTH3,
M_VTH1,
M_VICIN,
M_VCAS,
M_VRPREAMP,
M_VCAL_N,
M_VIPRE,
M_VISHAPER,
M_VCAL_P,
M_VTRIM,
M_VDCSH
};
// create copy and interpolate dac lists
std::vector<int> dacs_to_copy, dacs_to_interpolate;