in between

slsDetectorServers/ctbDetectorServer/MAX1932.h

@@ -0,0 +1 @@
+../slsDetectorServer/MAX1932.h

slsDetectorServers/jungfrauDetectorServer/MAX1932.h

@@ -0,0 +1 @@
+../slsDetectorServer/MAX1932.h

slsDetectorServers/slsDetectorServer/MAX1932.h

@@ -0,0 +1,64 @@
+#pragma once
+
+#include "commonServerFunctions.h" // blackfin.h, ansi.h
+
+/* MAX1932 HV DEFINES */
+
+#define MAX1932_HV_NUMBITS          (8)
+#define MAX1932_HV_DATA_OFST        (0)
+#define MAX1932_HV_DATA_MSK         (0x000000FF << MAX1932_HV_DATA_OFST)
+
+// on power up, dac = 0xff (1.25)
+
+uint32_t MAX1932_Reg = 0x0;
+uint32_t MAX1932_CsMask = 0x0;
+uint32_t MAX1932_ClkMask = 0x0;
+uint32_t MAX1932_DigMask = 0x0;
+int MAX1932_DigOffset = 0x0;
+
+/**
+ * Set Defines
+ * @param reg spi register
+ * @param cmsk chip select mask
+ * @param clkmsk clock output mask
+ * @param dmsk digital output mask
+ * @param dofst digital output offset
+ */
+void MAX1932_SetDefines(uint32_t reg, uint32_t cmsk, uint32_t clkmsk, uint32_t dmsk, int dofst) {
+    MAX1932_Reg = reg;
+    MAX1932_CsMask = cmsk;
+    MAX1932_ClkMask = clkmsk;
+    MAX1932_DigMask = dmsk;
+    MAX1932_DigOffset = dofst;
+}
+
+/**
+ * Disable SPI
+ */
+void MAX1932_Disable() {
+    bus_w(MAX1932_Reg, bus_r(MAX1932_Reg)
+            | MAX1932_CsMask
+            | MAX1932_ClkMask
+            &~(MAX1932_DigMask));
+}
+
+/**
+ * Configure
+ */
+void MAX1932_Configure(){
+    FILE_LOG(logINFOBLUE, ("Configuring MAX1932\n"));
+
+}
+
+
+/**
+ * Set
+ * @param dacnum dac number
+ * @param data dac value to set
+ */
+void MAX1932_Set (int dacnum, int data) {
+    FILE_LOG(logDEBUG1, ("\tSetting dac %d to %d\n", dacnum, data));
+
+}
+
+

slsDetectorServers/slsDetectorServer/common.h

@@ -0,0 +1,44 @@
+#pragma once
+
+/**
+ * Convert voltage to dac units
+ * @param voltage value in mv
+ * @param dacval pointer to value converted to dac units
+ * @param vmin minimum voltage in mV
+ * @param vmax maximum voltage in mV
+ * @param maximum number of steps
+ * @returns FAIL when voltage outside limits, OK if conversion successful
+ */
+int Common_VoltageToDac(int voltage, int* dacval, int vmin, int vmax, int nsteps) {
+
+    // validate
+    if ((voltage < vmin) || (voltage > vmax)) {
+        FILE_LOG(logERROR, ("Voltage value (to convert to dac value) is outside bounds (%d to %d mV): %d\n", vmin, vmax, voltage));
+        return FAIL;
+    }
+
+    // convert
+    *dacval = (int)(((voltage - vmin) / (vmax - vmin)) * (nsteps - 1) + 0.5);
+    return OK;
+}
+/**
+ * Convert dac units to voltage
+ * @param dacval dac units
+ * @param voltage pointer to value converted to mV
+ * @param vmin minimum voltage in mV
+ * @param vmax maximum voltage in mV
+ * @param maximum number of steps
+ * @returns FAIL when voltage outside limits, OK if conversion successful
+ */
+int Common_DacToVoltage(int dacval, int* voltage, int vmin, int vmax, int nsteps) {
+
+    // validate
+    if ((dacval < 0) || (dacval >= nsteps)) {
+        FILE_LOG(logERROR, ("Dac units (to convert to voltage) is outside bounds (0 to %d): %d\n", nsteps - 1, dacval));
+        return FAIL;
+    }
+
+    // convert
+    *voltage = vmin + (vmax - vmin) * dacval / (nsteps - 1);
+    return OK;
+}