detectors/slsDetectorPackage
25
0
Fork 0
mirror of https://github.com/slsdetectorgroup/slsDetectorPackage.git synced 2025-04-23 06:50:02 +02:00
Code Issues Actions Packages Releases Activity

Merge branch '3.0-rc' into developer

Browse Source
This commit is contained in:
Gemma Tinti 2017-08-16 18:21:01 +02:00
commit 0bbee8d91e
3 changed files with 81 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
examples/eiger_10Gb.config Normal file
View File

@ -0,0 +1,28 @@
detsizechan 1024 512
#detetctor geometry, long side of the module first
hostname beb059+beb058+
#1Gb detector hostname for controls
0:rx_tcpport 1991
#tcpport for the first halfmodule
0:rx_udpport 50011
#udp port first quadrant, first halfmodule
0:rx_udpport2 50012
#udp port second quadrant, first halfmodule
0:rx_udpip 10.0.30.210
#udp IP of the receiver over 10Gb
0:detectorip 10.0.30.100
#first half module 10 Gb IP
1:rx_tcpport 1992
#tcpport for the second halfmodule
1:rx_udpport 50013
#udp port first quadrant, second halfmodule
1:rx_udpport2 50014
#udp port second quadrant, second halfmodule
1:rx_udpip 10.0.40.210
#udp IP of the receiver over 10Gb,
#can be the same or different from 0:rx_udpip
1:detectorip 10.0.40.101
#second half module 10 Gb IP
rx_hostname x12sa-vcons
#1Gb receiver pc hostname
outdir /sls/X12SA/data/x12saop/Data10/Eiger0.5M

21
examples/eiger_1Gb.config Normal file
View File

@ -0,0 +1,21 @@
detsizechan 1024 512
#detetctor geometry, long side of the module first
hostname beb059+beb058+
#1Gb detector hostname for controls
0:rx_tcpport 1991
#tcpport for the first halfmodule
0:rx_udpport 50011
#udp port first quadrant, first halfmodule
0:rx_udpport2 50012
#udp port second quadrant, first halfmodule
1:rx_tcpport 1992
#tcpport for the second halfmodule
1:rx_udpport 50013
#udp port first quadrant, second halfmodule
1:rx_udpport2 50014
#udp port second quadrant, second halfmodule
rx_hostname x12sa-vcons
#1Gb receiver pc hostname
outdir /sls/X12SA/data/x12saop/Data10/Eiger0.5M

38
manual/manual-client/Eiger_short.tex
View File

@ -22,7 +22,7 @@
An EIGER single module (500~kpixels) needs:
\begin{itemize}
\item A chilled (water+alcohol) at approximately 21~$^{\circ}$C, which needs to dissipate 85~W.
\item A power supply (12~V, 8~A).
\item A power supply (12~V, 8~A). For the 9~M, a special cpu is give to remotely switch on and off the detector: see section~\ref{bchip100}.
\item 2$\times$1~Gb/s Ethernet connectors to control the detector and, optionally, receive data at low rate. A DHCP server that gives IPs to the 1~Gb/s connectors of the detector is needed. Note that flow control has to be enabled on the switch you are using.
\item 2$\times$10~Gb/s transceivers to optionally, receive data at high rate.
\end{itemize}
@ -39,7 +39,26 @@ Figure~\ref{fig:1} shows the relationship between the \textbf{Client} (which sit
The Client talks to control over 1~Gb Ethernet connection using TCP/IP to the detector and to the receiver. The detector sends data in UDP packets to the receiver. This data sending can be done over 1~Gb/s or 10~Gb/s.
\textbf{Switch on the detcetor only after having started the chiller and connected all the cables and network. EIGER is unable to get IP address after it has been switched on without a proper network set up. In taht case switch off and on teh detector again.}
\subsubsection{9M power supply interface: bchip100}\label{bchip100}
So the bchip100, which is a cpu, is located on the top side of the 9M and needs to be connected over 1Gb, to the same or a different network as the detector 1~GbE.
\begin{verbatim}
telnet bchip100
cd 9m/
\end{verbatim}
The directory contains some executables taht are needed to make your detector to work:
\begin{verbatim}
./on #to switch modules on
./off #to switch modules on
./hvon switched HV on (to 150V)
./hvoff switched HV off
./hvget gets the current HV value
. waterflow returns the current waterflow returned by the flowmeter
./temp returns the water temperature returned by the flowmeter
\end{verbatim}
A watchdog is running on bchip100 to check for the flow and temparature. If outside of parameters, the detector will be switched off.
\subsection{Mandatory setup - Receiver}
The receiver is a process run on a PC closely connected to the detector. Open one receiver for every half module board (remember, a module has two receivers!!!) . Go to {\tt{slsDetectorsPackage/bin/}}, \textbf{slsReceiver} should be started on the machine expected to receive the data from the detector.
@ -74,7 +93,7 @@ To do that:
sls_detector_put 0-config mydetector.config
\end{verbatim}
In the config file, if client, receiver and detector are using \textbf{1GbE} the following lines are mandatory:
In the config file, if client, receiver and detector are using \textbf{1GbE} the following lines are mandatory (see slsDetectorsPackage/examples/eiger_1Gb.config):
\begin{verbatim}
detsizechan 1024 512 #detetctor geometry, long side of the module first
hostname beb059+beb058+ #1Gb detector hostname for controls
@ -88,7 +107,7 @@ rx_hostname x12sa-vcons #1Gb receiver pc hostname
outdir /sls/X12SA/data/x12saop/Data10/Eiger0.5M
\end{verbatim}
In the config file, if client, receiver and detector commands are on 1Gb, but detector data to receiver are sent using \textbf{10GbE} the following lines are mandatory:
In the config file, if client, receiver and detector commands are on 1Gb, but detector data to receiver are sent using \textbf{10GbE} the following lines are mandatory (see slsDetectorsPackage/examples/eiger_10Gb.config):
\begin{verbatim}
detsizechan 1024 512 #detetctor geometry, long side of the module first
hostname beb059+beb058+ #1Gb detector hostname for controls
@ -464,10 +483,17 @@ ratecorr number
where {\tt{number}} is a string that should be interpreted as a float in s. 0.000000 means correction off. Values above zero are the value of $\tau$ in ns.
\item \begin{verbatim}
sls_detector_get m:vhighvoltage
m:vhighvoltage number
sls_detector_get vhighvoltage
vhighvoltage number
\end{verbatim}
where {\tt{number}} is a string that should be interpreted as an int and for proper Eiger setting is approximately 150~V.
where {\tt{number}} is a string that should be interpreted as an int and for proper Eiger setting is approximately 150~V if it is cooorectly set. If two master modules are presents (multi systems), teh average is returned (still to be tested).
\item \begin{verbatim}
sls_detector_get busy
busy number
\end{verbatim}
where {\tt{number}} is a string that should be interpreted as an int for 0/1 meaning no/yes. This command tells if the sharedmemory has in memory that an acquisition has been started or not. It should allows to use the non blocking acquire, regardless of any delay to teh detector getting into 'running' mode.
\end{enumerate}