redford_s
a2fcf6d8a1
Removed initial pixel masks.
...
Pixel mask comes from pedestal, is not used when looking for calibration consts.
2019-02-08 18:22:05 +01:00
redford_s
0de9d9366e
Consistent ratios.
2019-02-08 17:20:26 +01:00
redford_s
8e9dadc17a
Added maps where no calib is found.
2019-02-08 16:55:25 +01:00
redford_s
d8515bcaa6
Better TCanvas.
2019-02-08 16:15:27 +01:00
redford_s
556cd7bb4f
Consistent construction of the data arrays per pixel.
2019-02-08 15:29:57 +01:00
redford_s
de0ef22d58
Consistent variable names.
2019-02-08 15:07:09 +01:00
redford_s
c4ebbf4666
Since all analysis files now use the same range finding functions, moved them to jungfrauCommonFunctions.
2019-02-08 14:19:50 +01:00
redford_s
b281978e07
Added size check to range finder functions and better plotting.
...
Results unchanged.
2019-02-08 14:04:21 +01:00
redford_s
f3ba85d343
Added the size check to the range functions and improved plotting.
2019-02-08 11:40:43 +01:00
redford_s
0dd0b92d24
Taking the better range finding functions from BP and DB analyses, added a size check.
...
Only affects one or two pixels per module.
2019-02-08 10:32:52 +01:00
redford_s
6f43136afe
Better range definitions, and plotting only when fits are done.
2019-02-07 17:47:25 +01:00
redford_s
7a47d6e3e5
Check of valid fit range, and added the plus/minus1 to the range finder functions.
2019-02-07 14:05:10 +01:00
redford_s
a17198a488
Added frame number check.
2019-02-06 17:42:42 +01:00
redford_s
a6514dffa0
Standardising the number of frames check.
2019-02-06 15:29:02 +01:00
redford_s
73510bf6d0
Added frame number check, and a check that the fit range exists.
...
Results improve.
2019-02-06 15:15:50 +01:00
redford_s
8c030d2de7
Added createPerStepHistos option as for other analyses.
2019-02-06 11:12:06 +01:00
redford_s
9b3b3b6dcd
For consistency, adding the plus/minus one here too.
...
It makes no difference to the BP analysis, because there are always some fully switched points.
2019-02-06 11:06:28 +01:00
redford_s
4d8fd13fe1
More general functions to find the fit ranges. Results unchanged.
...
The plus/minus 1 in the starting point is important to catch the case where in one gain there are no points atall without switching.
2019-02-06 10:59:41 +01:00
redford_s
8c07ef0c08
More general fit range finder. Results unchanged.
2019-02-06 10:25:51 +01:00
redford_s
8a667cd5d6
Better filtering of saturation.
...
Previously, saturated data points were not used, but steps including saturated steps will then still be biased.
Now, if any point within a step saturates the step is not used.
Results look better both per pixel and overall.
Note this requires full rerun (createHistoFile).
2019-02-05 17:04:44 +01:00
redford_s
b8869c25c2
Better plotting axis, using all data points and not just fit range.
2019-02-05 15:41:40 +01:00
redford_s
3f23aac33c
Better drawing range, depending on points not fit range.
2019-02-04 17:03:52 +01:00
redford_s
c35d6da782
Important change to fit ranges. Was not checking for full switching, so partially switched points were included.
2019-02-04 16:48:51 +01:00
redford_s
58b367fb6f
Repointing to merged data location.
2019-01-25 15:39:00 +01:00
redford_s
2840b75ae9
Change of fit range.
...
Previous limits were one data point too big. All modules rerun.
Statistics in G0 becomes even more of a problem.
2019-01-25 15:36:25 +01:00
redford_s
9d4949ad14
Added linearity limits.
2019-01-25 14:13:43 +01:00
redford_s
eab04d984b
To analyse the number of bad pixels per calibrated module.
2019-01-23 09:16:27 +01:00
redford_s
24d8d3e8da
Added linearity percentages.
2019-01-18 18:02:50 +01:00
redford_s
2f4ffb730d
Nicer stats box as for CS_analysis.
2019-01-18 14:34:45 +01:00
redford_s
71a3404495
Added pedestal tracking.
2018-10-15 14:08:27 +02:00
redford_s
17ddf3e73d
Added exit if number of frames isn't as expected.
2018-10-10 17:02:25 +02:00
redford_s
763354a43d
Fixed tiny bug where files with correct number of frames would have last frame ignored.
2018-10-10 16:56:13 +02:00
redford_s
bc9935893e
BP scan for M040 had missing frames. Data, plots and results removed.
2018-10-10 16:20:21 +02:00
redford_s
8197689681
Calibrated a few modules.
2018-10-10 15:01:36 +02:00
redford_s
19f90a6d39
Calibrated another 4M. Recalibrated module 223. 231 only calibrated for G0.
2018-08-07 16:44:29 +02:00
redford_s
93445e82cb
Streamlining, removed pedestal RMS plots for G1 and G2, they are never useful.
2018-08-02 11:50:19 +02:00
redford_s
0e74572a13
Streamlining, removed pedestal RMS plots for G1 and G2, they are never useful.
2018-08-02 11:44:51 +02:00
redford_s
e3d2d3ec14
Streamlining, removed zoom normalised plots. Unzoomed are enough.
2018-08-02 11:39:07 +02:00
redford_s
9959975f1f
Calibrated another 4M.
2018-08-02 10:51:50 +02:00
redford_s
c9e7442c13
Calibrated another 4M. ModuleComp: didn't add module 023 yet as results are terrible.
...
Realised 206 was already there. Traced back the mistake, it should have been 122, see commit c78763ec
2018-07-30 17:58:17 +02:00
redford_s
68c0f21bd2
Calibrated another 4M.
2018-07-26 09:07:21 +02:00
redford_s
e2eda015d1
Calibrated six more modules.
2018-07-24 08:59:16 +02:00
redford_s
677ff19bc6
Adding gainmap for partially calibrated module 097 for SwissFEL.
2018-06-15 13:50:02 +02:00
redford_s
37d84b312c
In order to save space, only save the module maps if createPerStepHistos flag is set. Not tested.
2018-06-12 17:28:15 +02:00
redford_s
0b24bdeb66
Added statistics to the missed and default value maps.
2018-06-12 17:22:42 +02:00
redford_s
6cea634f4c
Calibrated another 4M and a strixel module for SwissFEL.
2018-06-11 08:55:19 +02:00
redford_s
c78763ece7
Calibrated another 4M.
2018-05-24 14:14:40 +02:00
redford_s
33acaa5163
Calibration of another 4M.
2018-05-18 17:09:12 +02:00
redford_s
c43dd8368a
Finished calibration of 4M.
2018-05-15 14:07:57 +02:00
redford_s
c443b08811
BP and CS calibration of another 4M.
2018-05-11 17:00:35 +02:00
redford_s