debye_bec/bec_ipython_client/plugins/move_to_label.py

@@ -0,0 +1,82 @@
+from __future__ import annotations
+
+import builtins
+from typing import TYPE_CHECKING
+
+from bec_lib import bec_logger
+from debye_bec.devices.absorber import STATUS as ABS_STATUS
+
+logger = bec_logger.logger
+# import builtins to avoid linter errors
+dev = builtins.__dict__.get("dev")
+
+class MoveToLabelError(Exception):
+    """Exception for the MoveToLabel function"""
+
+def move_to_label():
+    """
+    Function to move several motors to a specific position defined in the label dict.
+    """
+
+    label = get_device_conditions(label="digitalTwin")
+
+    # Get absorber status and close if open
+    logger.info("Check Frontend Absorber Status")
+    abs_was_open = dev.abs.status.get() == ABS_STATUS.OPEN
+    if abs_was_open:
+        logger.info("  Close Frontend Absorber")
+        status = dev.abs.close()
+        status.wait()
+
+    # Move Frontend Slits
+    logger.info("Move Frontend Slits into position")
+    devices = ["sldi_centerx", "sldi_centery", "sldi_gapx", "sldi_gapy"]
+    matches = {key: label[key] for key in devices if key in label}
+    statuses = []
+    for device in matches.values():
+        statuses.append(device['device'].move(device['value']))
+    for status in statuses:
+        status.wait(timeout=30)
+
+    # Move Collimating mirror
+    logger.info("Move Collimating Mirror into position")
+    if "cm_rotx" in label: # pitch
+        logger.info("  Move pitch into position")
+        surveyed_movement(
+            axis=label['cm_rotx'],
+            surveyed_axes= [
+                {'device': dev.cm_rotz, 'abs_tol': 0.1},
+            ]
+        )
+
+    # Restore absorber position
+    logger.info("Restore Frontend Absorber Status")
+    if abs_was_open:
+        status = dev.abs.open()
+        status.wait()
+
+
+def surveyed_movement(axis, surveyed_axes):
+    """
+    Moves an axis while surverying a set of axes.
+
+    Args:
+        axis (DeviceCondition): Device condition
+        surveyed_axes (list): List of dicts (same format as DeviceCondition)
+
+    Raises:
+        If during movement of axis, one of the surveyed axes moves out of tolerance.
+    """
+
+    for surv_ax in surveyed_axes:
+        surv_ax['old_value'] = surv_ax['device'].read()
+    status = axis['device'].move(axis['value'])
+    while status.status == 'RUNNING':
+        for surv_ax in surveyed_axes:
+            if abs(surv_ax['device'].read() - surv_ax['old_value']) > surv_ax['abs_tol']:
+                axis['device'].stop()
+                raise MoveToLabelError(
+                    f"During movement of {axis['device'].name}, {surv_ax['device'].name} " +
+                    f"started to move unexpectedly (old pos: {surv_ax['old_value']}, " +
+                    f"current pos: {surv_ax['device'].read()})"
+                )

debye_bec/bec_widgets/widgets/client.py

@@ -0,0 +1,41 @@
+# This file was automatically generated by generate_cli.py
+# type: ignore
+
+from __future__ import annotations
+
+from bec_lib.logger import bec_logger
+
+from bec_widgets.cli.rpc.rpc_base import RPCBase, rpc_call, rpc_timeout
+
+logger = bec_logger.logger
+
+# pylint: skip-file
+
+
+_Widgets = {
+    "DigitalTwin": "DigitalTwin",
+}
+
+
+class DigitalTwin(RPCBase):
+    """Main widget of Digital Twin"""
+
+    _IMPORT_MODULE = "debye_bec.bec_widgets.widgets.digital_twin.digital_twin"
+
+    @rpc_call
+    def remove(self):
+        """
+        Cleanup the BECConnector
+        """
+
+    @rpc_call
+    def attach(self):
+        """
+        None
+        """
+
+    @rpc_call
+    def detach(self):
+        """
+        Detach the widget from its parent dock widget (if widget is in the dock), making it a floating widget.
+        """

debye_bec/bec_widgets/widgets/designer_plugins.py

@@ -0,0 +1,13 @@
+# This file was automatically generated by generate_cli.py
+# type: ignore
+from __future__ import annotations
+
+# pylint: skip-file
+
+designer_plugins = {
+    "DigitalTwin": ("debye_bec.bec_widgets.widgets.digital_twin.digital_twin", "DigitalTwin"),
+}
+
+widget_icons = {
+    "DigitalTwin": "lightbulb",
+}

debye_bec/bec_widgets/widgets/digital_twin/calc_positions.py

@@ -0,0 +1,242 @@
+import os
+import numpy as np
+from bec_lib import bec_logger
+
+os.environ["USE_XRT"] = "False"
+import debye_bec.bec_widgets.widgets.x01da_parameters as bl
+
+logger = bec_logger.logger
+
+def calc_positions(cfg):
+
+    pos = {}
+
+    ## FE slits
+    trxr = -np.arctan(cfg['h_acc'])*bl.feSlits.center1[1]
+    trxw = (np.arctan(cfg['h_acc'])*bl.feSlits.center1[1])/bl.feSlits.center1[1]*bl.feSlits.center2[1]
+    tryb = -np.arctan(cfg['v_acc'])*bl.feSlits.center1[1]
+    tryt = (np.arctan(cfg['v_acc'])*bl.feSlits.center1[1])/bl.feSlits.center1[1]*bl.feSlits.center2[1]
+
+    # trxw_proj = trxw/bl.feSlits.center2[1]*bl.feSlits.center1[1]
+    # tryt_proj = tryt/bl.feSlits.center2[1]*bl.feSlits.center1[1]
+
+    # xcen = (trxr + trxw) / 2
+    # ycen = (tryb + tryt) / 2
+    xgap = trxw - trxr
+    ygap = tryt - tryb
+
+    pos['sldi_gapx'] = {'value': xgap}
+    pos['sldi_gapy'] = {'value': ygap}
+
+    ## Collimating Mirror
+    obj_dist = bl.cm.center[1] # object distance
+    beam_vs = 2 * obj_dist * np.tan(cfg['v_acc']) # vertical size of beam after CM
+
+    # TRX
+    try:
+        index = bl.cm.surface.index(cfg['cm_stripe'])
+    except:
+        raise ValueError(f"Requested stripe {cfg['cm_stripe']} not found in parameters!")
+    cm_trx = -(bl.cm.limOptX[0][index] + bl.cm.limOptX[1][index]) / 2
+    pos['cm_trx'] = {'value': cm_trx}
+
+    # TRY
+    height = obj_dist * np.tan(cfg['v_acc'])**2 * 1 / np.tan(cfg['cm_pitch'])
+    pos['cm_try'] = {'value': height}
+
+    # Pitch
+    pos['cm_rotx'] = {'value': -cfg["cm_pitch"]*1e3} # invert and convert to mrad (same as EGU of rotx axis)
+
+    # Bending Radius
+    radius = 2. * obj_dist / np.sin(cfg['cm_pitch']) # Elements of modern X-ray Physics, page 108 ff.
+    pos['cm_bnd_radius'] = {'value': radius * 1e-6} # Convert to km
+
+    ## Monochromator
+    # Bragg Angle
+    # if cfg['mo1_mode'] == 'Monochromatic':
+    #     # Add 2x CM pitch to the bragg angle
+    #     bragg =  ((2 * cfg['cm_pitch']) + cfg['mo1_bragg']) / np.pi * 180
+    # elif cfg['mo1_mode'] == 'Pinkbeam':
+    #     # Align xtal surfaces parallel to beam
+    #     bragg =  (2 * cfg['cm_pitch']) / np.pi * 180
+    # else:
+    #     raise Exception('Monochromator mode not supported')
+    if cfg['mo1_mode'] == 'Monochromatic':
+        # Add 2x CM pitch to the bragg angle
+        bragg = cfg['mo1_bragg']
+    elif cfg['mo1_mode'] == 'Pinkbeam':
+        # Align xtal surfaces parallel to beam
+        bragg =  0
+    else:
+        raise Exception('Monochromator mode not supported')
+    pos['mo1_bragg_angle'] = {'value': bragg/np.pi*180} # Bragg angle in deg
+
+    # TRY, Height
+    l = bl.mo1.xtalGap[0]/np.sin(cfg['mo1_bragg'])
+    yhor = l*np.cos(2.*(cfg['mo1_bragg']+cfg['cm_pitch']))
+    yver = yhor*np.tan(2.*cfg['cm_pitch'])
+
+    if cfg['mo1_mode'] == 'Monochromatic':
+        beamOffsetCCM = l*np.sin(2.*(cfg['mo1_bragg']+cfg['cm_pitch']))-yver # Resultat ist korrekt!
+    elif cfg['mo1_mode'] == 'Pinkbeam':
+        beamOffsetCCM = 0
+    else:
+        raise Exception('Monochromator mode not supported')
+
+    def csc(a):
+        return 1/np.sin(a)
+
+    def cot(a):
+        return 1/np.tan(a)
+
+    # calculate height of center of first crystal surface
+    f = bl.mo1.rotOffset # rotation offset, mm
+    # logger.info(f'f = {f}')
+    d = bl.mo1.heightOffset # xtal height offset, mm
+    # logger.info(f'd = {d}')
+    c = d*csc(cfg['mo1_bragg'])-f*cot(cfg['mo1_bragg'])
+    # logger.info(f'c = {c}')
+
+    # Calculate height of center of rotation
+    b = np.sqrt(d**2*csc(cfg['mo1_bragg'])**2-2*d*f*cot(cfg['mo1_bragg'])*csc(cfg['mo1_bragg'])+f**2*cot(cfg['mo1_bragg'])**2+f**2)
+    # logger.info(f'b = {b}')
+    h = np.cos(np.pi/2-np.arctan(f/c)-cfg['mo1_bragg']-2*cfg['cm_pitch'])*b
+    # logger.info(f'h = {h}')
+    h2 = ((bl.mo1.center[1] - bl.cm.center[1])-np.sqrt(b**2-h**2))*np.tan(2*cfg['cm_pitch'])
+    # logger.info(f'mo1 = {bl.mo1.center[1]}')
+    # logger.info(f'cm = {bl.cm.center[1]}')
+    # logger.info(f'pitch = {cfg["cm_pitch"]}')
+    # logger.info(f'h2 = {h2}')
+    #TODO Mono height not exactly the same as in raytracing
+    heightCCM1real = h + h2 # per design, the height should not change if the pitch of the CM is not changed!
+    # heightCCM1real = heightCCM1real - 30 # Zero position of stage is at 1430 mm from ground.
+    if cfg['mo1_mode'] == 'Monochromatic':
+        pass
+    elif cfg['mo1_mode'] == 'Pinkbeam':
+        heightCCM1real = heightCCM1real - 13 # Move down to let beam pass between both crystal without touching copper cooler
+    else:
+        raise Exception('Monochromator mode not supported')
+    pos['mo1_try'] = {'value': heightCCM1real}
+
+    # TRX, Crystal selection
+    if cfg['mo1_mode'] == 'Monochromatic':
+        try:
+            xtal = cfg['mo1_xtal'].translate(str.maketrans('', '', '()')) # Remove brackets from xtal name to conform with parameters
+            index = bl.mo1.xtal.index(xtal)
+        except:
+            raise ValueError(f"Requested xtal {xtal} not found in parameters!")
+        pos['mo1_trx'] = {'value': bl.mo1.xtalOffsetX[index]}
+    else:
+        pos['mo1_trx'] = {'value': 0}
+
+
+    #TODO move to mono, calc for beam Z-movement between crystal surfaces
+    diag = bl.mo1.xtalGap[0] / np.sin(cfg['mo1_bragg']) # Calculations for Mono
+    dz = diag * np.cos(2 * (cfg['cm_pitch'] + cfg['mo1_bragg']))
+
+    ## Slits 1
+    d = bl.opSlits1.center[1] - bl.cm.center[1] - dz
+    sl1_beam_height = d * np.tan(2 * cfg['cm_pitch']) + beamOffsetCCM
+    pos['sl1_centery'] = {'value': sl1_beam_height}
+    pos['sl1_gapy'] = {'value': beam_vs + 1} # Add 0.5 mm space on both sides of the beam
+
+    ## Beam Monitor 1
+    d = bl.opBM1.center[1] - bl.cm.center[1] - dz
+    # logger.info(f'distance: {d}')
+    # logger.info(f'cm pitch: {cfg["cm_pitch"]}')
+    # logger.info(f'mono offset: {beamOffsetCCM}')
+    bm1_beam_height = d * np.tan(2 * cfg['cm_pitch']) + beamOffsetCCM
+    pos['bm1_try'] = {'value': bm1_beam_height}
+
+    ## Focusing Mirror
+    p = bl.fm.center[1]
+    q = cfg['smpl'] - bl.fm.center[1]
+    f = (p*q)/(p+q) # focal length
+
+    # Bender radius
+    if cfg['fm_qy'] is None:
+        radius = 2 * q / np.sin(cfg['fm_rotx']) # ideal bending radius for focused beam
+    else:
+        radius = 2 * cfg['fm_qy'] / np.sin(cfg['fm_rotx']) # ideal bending radius for unfocused beam
+    pos['fm_bnd_radius'] = {'value': radius * 1e-6} # Convert to km
+
+    # Pitch
+    d = bl.fm.center[1] - bl.cm.center[1] - dz
+    fm_rotx = 2 * cfg['cm_pitch'] - cfg['fm_rotx'] # calculate pitch in absolute values (according to horizontal plane)
+    pos['fm_rotx'] = {'value': -fm_rotx * 1e3} # invert and convert to mrad (same as EGU of rotx axis)
+
+    if cfg['fm_stripe'] in ('Rh (toroid)', 'Pt (toroid)'):
+
+        # TRY
+        if cfg['fm_stripe'] in 'Rh (toroid)':
+            r = bl.fm.r[0]
+            h_cyl = bl.fm.hToroid[0]
+        else: # PT toroid
+            r = bl.fm.r[1]
+            h_cyl = bl.fm.hToroid[1]
+        widthBeam = 2 * bl.fm.center[1] * np.tan(cfg['h_acc'] * 1e-3)
+        alpha = np.arccos(1 - widthBeam**2 / (2 * r**2))
+        h = r - (r * np.cos(alpha / 2))
+        fm_beam_height = (d * np.tan(2 * cfg['cm_pitch']) + beamOffsetCCM) * cfg['fm_gain_height']
+        fm_height = (d * np.tan(2 * cfg['cm_pitch']) + beamOffsetCCM - h_cyl + h / 2) * cfg['fm_gain_height']
+        pos['fm_try'] = {'value': fm_height}
+
+        # TRX
+        if cfg['fm_stripe'] in 'Rh (toroid)':
+            x_cyl = - bl.fm.xToroid[0]
+        else:
+            x_cyl = - bl.fm.xToroid[1]
+        pos['fm_trx'] = {'value': x_cyl}
+
+    elif cfg['fm_stripe'] in ('Rh (flat)', 'Pt (flat)'):
+
+        # TRY
+        fm_height = (d * np.tan(2 * cfg['cm_pitch']) + beamOffsetCCM) * cfg['fm_gain_height']
+        fm_beam_height = fm_height
+        pos['fm_try'] = {'value': fm_height}
+
+        # TRX
+        if cfg['fm_stripe'] in 'Rh (flat)':
+            x_flat = - bl.fm.xFlat[0]
+        else:
+            x_flat = - bl.fm.xFlat[1]
+        pos['fm_trx'] = {'value': x_flat}
+
+    else:
+        raise Exception('FM Stripe selection not valid')
+
+    pos['fm_roty'] = {'value': 0}
+    pos['fm_rotz'] = {'value': 0}
+
+    ## Slits 2
+    d = bl.opSlits2.center[1] - bl.fm.center[1]
+    sl2_beam_height = fm_beam_height - d * np.tan(-(2 * cfg['cm_pitch'] - 2 * cfg['fm_rotx']))
+    pos['sl2_centery'] = {'value': sl2_beam_height}
+    pos['sl2_gapy'] = {'value': beam_vs + 1} # Add 0.5 mm space on both sides of the beam
+
+    ## Beam Monitor 2
+    d = bl.opBM2.center[1] - bl.fm.center[1]
+    bm2_beam_height = fm_beam_height - d * np.tan(-(2 * cfg['cm_pitch'] - 2 * cfg['fm_rotx']))
+    pos['bm2_try'] = {'value': bm2_beam_height}
+
+    ## Optical Table
+
+    # TRY
+    d = bl.ehWindow.center[1] - bl.fm.center[1]
+    ot_height = fm_beam_height - d * np.tan(-(2 * cfg['cm_pitch'] - 2 * cfg['fm_rotx']))
+    # logger.info(fm_height)
+    # logger.info(d * np.tan((2 * cfg['cm_pitch'] - 2 * cfg['fm_rotx'])))
+    pos['ot_try'] = {'value': ot_height}
+
+    # Pitch
+    ot_pitch = - (2 * cfg['cm_pitch'] - 2 * cfg['fm_rotx'])
+    pos['ot_rotx'] = {'value': ot_pitch * 1e3}
+
+    # TRZ ES1
+    ot_es1_trz = cfg['smpl']
+    pos['ot_es1_trz'] = {'value': ot_es1_trz}
+
+    # ES0 exit window
+    pos['es0wi_try'] = {'value': 5} # At 5mm, the middle of the window is 500 mm from the table (neutral position)
+
+    return pos

debye_bec/bec_widgets/widgets/digital_twin/calc_sideview.py

@@ -0,0 +1,42 @@
+import numpy as np
+import debye_bec.bec_widgets.widgets.x01da_parameters as bl
+
+def calc_sideview(cfg):
+
+    # Calculate height of beam after CM
+    height = 2 * bl.cm.center[1] * np.tan(cfg['v_acc'])
+
+    # beam height (Y=height, Z=along beam)
+    beam = {}
+    beam['x'] = []
+    beam['y'] = []
+    beam['x'].append(0) # Source
+    beam['y'].append(bl.sourceHeight)
+    beam['x'].append(bl.cm.center[1]) # CM 
+    beam['y'].append(bl.sourceHeight)
+    if cfg['mo1_mode'] in 'Monochromatic':
+        diag = bl.mo1.xtalGap[0]/np.sin(cfg['mo1_bragg']) # Calculations for Mono
+        dy = diag*np.sin(2*(cfg['cm_pitch']+cfg['mo1_bragg']))
+        dz = diag*np.cos(2*(cfg['cm_pitch']+cfg['mo1_bragg']))
+        beam['x'].append(bl.mo1.center[1]-dz/2) # Mono 1.1
+        beam['y'].append(bl.sourceHeight+np.tan(2*cfg['cm_pitch'])*(bl.mo1.center[1]-dz/2-bl.cm.center[1]))
+        beam['x'].append(bl.mo1.center[1]+dz/2) # Mono 1.2
+        beam['y'].append(bl.sourceHeight+np.tan(2*cfg['cm_pitch'])*(bl.mo1.center[1]-dz/2-bl.cm.center[1])+dy)
+        beam['x'].append(bl.fm.center[1]) # FM
+        beam['y'].append(bl.sourceHeight+np.tan(2*cfg['cm_pitch'])*(bl.fm.center[1]-bl.cm.center[1]-dz)+dy)
+        beam['x'].append(cfg['smpl']) # Experiment
+        beam['y'].append(bl.sourceHeight+np.tan(2*cfg['cm_pitch'])*(bl.fm.center[1]-bl.cm.center[1]-dz)+dy+np.tan(2*(cfg['cm_pitch']-cfg['fm_rotx']))*(cfg['smpl']-bl.fm.center[1]))
+    elif cfg['mo1_mode'] == 'Pinkbeam':
+        beam['x'].append(bl.fm.center[1]) # FM
+        beam['y'].append(bl.sourceHeight+np.tan(2*cfg['cm_pitch'])*(bl.fm.center[1]-bl.cm.center[1]))
+        beam['x'].append(cfg['smpl']) # Experiment
+        beam['y'].append(bl.sourceHeight+np.tan(2*cfg['cm_pitch'])*(bl.fm.center[1]-bl.cm.center[1])+np.tan(2*(cfg['cm_pitch']-cfg['fm_rotx']))*(cfg['smpl']-bl.fm.center[1]))
+
+    dy_fm_ex = beam['y'][-1] - beam['y'][-2]
+    dz_fm_ex = beam['x'][-1] - beam['x'][-2]
+    dz_fm_win = bl.ehWindow.center[1] - beam['x'][-2]
+    h_at_win = beam['y'][-2] + dy_fm_ex / dz_fm_ex * dz_fm_win
+
+    beam['heightWindow'] = h_at_win
+
+    return beam

debye_bec/bec_widgets/widgets/digital_twin/calc_surfaces.py

@@ -0,0 +1,131 @@
+import os
+import re
+import numpy as np
+from bec_lib import bec_logger
+
+logger = bec_logger.logger
+
+os.environ["USE_XRT"] = "False"
+import debye_bec.bec_widgets.widgets.x01da_parameters as bl
+
+def calc_surfaces(cfg):
+
+    out = {
+        'cm': {'x': [], 'y': []},
+        'mo1_1': {'x': [], 'y': []},
+        'mo1_2': {'x': [], 'y': []},
+        'fm': {'x': [], 'y': []},
+    }
+
+    # Collimating mirror
+    l = 2 * bl.cm.center[1] * np.tan(cfg['v_acc'])/np.sin(cfg['cm_pitch'])
+
+    w1 = 2 * (bl.cm.center[1]-l/2) * np.tan(cfg['h_acc'])
+    w2 = 2 * (bl.cm.center[1]+l/2) * np.tan(cfg['h_acc'])
+
+    index = bl.cm.surface.index(cfg['cm_stripe'])
+    cen = (bl.cm.limOptX[0][index] + bl.cm.limOptX[1][index]) / 2
+
+    if cfg['cm_trx'] is not None:
+        cen = cfg['cm_trx']
+
+    out['cm']['x'] = [cen-w1/2, cen-w2/2, cen+w2/2, cen+w1/2]
+    out['cm']['y'] = [-l/2, l/2, l/2, -l/2]
+
+
+    # Monochromator
+    # calculate height of center of first crystal surface
+    c = bl.mo1.heightOffset*1/np.sin(cfg['mo1_bragg'])-bl.mo1.rotOffset*1/np.tan(cfg['mo1_bragg'])
+    e = bl.mo1.xtalGap[0]/np.tan(cfg['mo1_bragg'])-c
+
+    xtal = cfg['mo1_xtal'].translate(str.maketrans('', '', '()')) # Remove brackets from xtal name to conform with parameters
+    index = bl.mo1.xtal.index(xtal)
+
+    xtalPos = bl.mo1.xtalOffsetX[index]
+    xtalLength1 = bl.mo1.xtalLength1[index]
+    xtalLength2 = bl.mo1.xtalLength2[index]
+
+    widthBeam = 2 * bl.mo1.center[1] * np.tan(cfg['h_acc'])
+        
+    heightBeam = 2 * bl.cm.center[1] * np.tan(cfg['v_acc'])
+    w = heightBeam / np.sin(cfg['mo1_bragg'])
+
+    if cfg['mo1_mode'] in 'Monochromatic':
+        out['mo1_1']['x'] = [xtalPos-widthBeam/2, xtalPos+widthBeam/2, xtalPos+widthBeam/2, xtalPos-widthBeam/2]
+        out['mo1_1']['y'] = [xtalLength1/2-c-w/2, xtalLength1/2-c-w/2, xtalLength1/2-c+w/2, xtalLength1/2-c+w/2]
+        out['mo1_2']['x'] = [xtalPos-widthBeam/2, xtalPos+widthBeam/2, xtalPos+widthBeam/2, xtalPos-widthBeam/2]
+        out['mo1_2']['y'] = [-xtalLength2/2+e-w/2, -xtalLength2/2+e-w/2, -xtalLength2/2+e+w/2, -xtalLength2/2+e+w/2]
+    else: # Pinkbeam
+        out['mo1_1']['x'] = []
+        out['mo1_1']['y'] = []
+        out['mo1_2']['x'] = []
+        out['mo1_2']['y'] = []
+
+    # Focusing mirror
+    if cfg['fm_stripe'] in ('Rh (toroid)', 'Pt (toroid)'):
+        surface = bl.fm.surfaceToroid
+        stripe = re.sub(r'\s*\(.*?\)', '', cfg['fm_stripe']).strip()
+        index = surface.index(stripe)
+        off = (bl.fm.limOptXToroid[0][index] + bl.fm.limOptXToroid[1][index]) / 2
+        r = bl.fm.r[index]
+    else:
+        surface = bl.fm.surfaceFlat
+        stripe = re.sub(r'\s*\(.*?\)', '', cfg['fm_stripe']).strip()
+        index = surface.index(stripe)
+        off = (bl.fm.limOptXFlat[0][index] + bl.fm.limOptXFlat[1][index]) / 2
+        r = bl.fm.r[index]
+    if cfg['fm_trx'] is not None:
+        off = cfg['fm_trx']
+
+    widthBeam = 2 * bl.fm.center[1] * np.tan(cfg['h_acc'])
+
+    if cfg['fm_stripe'] in ('Rh (toroid)', 'Pt (toroid)'):
+
+        l = heightBeam/np.sin(cfg['fm_rotx'])
+        alpha = np.arccos(1-widthBeam**2/(2*r**2))    
+        h = r-(r*np.cos(alpha/2))
+        z = h/np.tan(cfg['fm_rotx'])
+
+        x = [off-widthBeam/2, off-widthBeam/2]
+        y = [l/2-z/2, -l/2-z/2]
+
+        # logger.info(f'stripe: {cfg["fm_stripe"]}')
+        # logger.info(f'fm_rotx: {cfg["fm_rotx"]}')
+        # logger.info(f'h: {h}')
+        # logger.info(f'z: {z}')
+        # logger.info(f'r: {r}')
+
+        res = 20
+        xElipse = np.linspace(0, np.pi, res)
+        yElipse = np.linspace(0, np.pi, res)
+        xElipse = [-widthBeam/2*np.cos(i)+off for i in xElipse]
+        yElipse = [widthBeam*np.sin(i)*z/widthBeam-l/2-z/2 for i in yElipse]
+
+        x.extend(xElipse)
+        y.extend(yElipse)
+
+        x.extend([off+widthBeam/2, off+widthBeam/2])
+        y.extend([-l/2-z/2, l/2-z/2])
+
+        res = 50
+        xElipse = np.linspace(np.pi, 0, res)
+        yElipse = np.linspace(np.pi, 0, res)
+        xElipse = [-widthBeam/2*np.cos(i)+off for i in xElipse]
+        yElipse = [widthBeam*np.sin(i)*z/widthBeam+l/2-z/2 for i in yElipse]
+
+        x.extend(xElipse)
+        y.extend(yElipse)
+
+        out['fm']['x'] = x
+        out['fm']['y'] = y
+
+    else: # flat surface, no toroid
+        l = heightBeam/np.sin(cfg['fm_rotx'])
+
+        w1 = 2 * (bl.fm.center[1]-l/2) * np.tan(cfg['h_acc'])
+        w2 = 2 * (bl.fm.center[1]+l/2) * np.tan(cfg['h_acc'])
+
+        out['fm']['x'] = [off-w1/2, off+w1/2, off+w2/2, off-w2/2]
+        out['fm']['y'] = [-l/2, -l/2, l/2, l/2]
+
+    return out

debye_bec/bec_widgets/widgets/digital_twin/calc_varia.py

@@ -0,0 +1,206 @@
+import re
+import numpy as np
+from scipy.interpolate import UnivariateSpline
+from xrt.backends.raycing.physconsts import CHeVcm, AVOGADRO
+from bec_lib import bec_logger
+
+import debye_bec.bec_widgets.widgets.x01da_parameters as bl
+
+logger = bec_logger.logger
+
+def sldi_gap_to_acc(sldi_gapx, sldi_gapy):
+    d1 = bl.feSlits.center1[1]
+    d2 = bl.feSlits.center2[1]
+    h_acc = np.tan(sldi_gapx / (d2 + d1))
+    v_acc = np.tan(sldi_gapy / (d2 + d1))
+
+    # h_acc = np.tan(sldi_gapx / (2 * d1))
+    # v_acc = np.tan(sldi_gapy / (2 * d1))
+    return h_acc, v_acc
+
+def cm_trx_to_stripe(cm_trx):
+    cm_stripe = None
+    for name, low, high in zip(bl.cm.surface, bl.cm.limOptX[0], bl.cm.limOptX[1]):
+        if low <= cm_trx <= high:
+            cm_stripe = name
+    return cm_stripe
+
+def fm_trx_to_stripe(fm_trx):
+    fm_stripe = None
+    for name, low, high in zip(bl.fm.surfaceFlat, bl.fm.limOptXFlat[1], bl.fm.limOptXFlat[0]):
+        if low <= fm_trx <= high:
+            fm_stripe = name + ' (flat)'
+    for name, low, high in zip(bl.fm.surfaceToroid, bl.fm.limOptXToroid[1], bl.fm.limOptXToroid[0]):
+        if low <= fm_trx <= high:
+            fm_stripe = name + ' (toroid)'
+    return fm_stripe
+
+def mo1_energy_resolution(xtal, energy):
+    index = bl.mo1.xtal.index(xtal)
+    crystal = bl.mo1.material1[index]
+
+    dtheta = np.linspace(-30, 90, 601)
+    theta = crystal.get_Bragg_angle(energy) + dtheta * 1e-6
+    refl = np.abs(crystal.get_amplitude(energy, np.sin(theta))[0])**2  # single crystal
+
+    refl2 = refl**2  # DCM with parallel crystals
+
+    # FWHM of the DCM curve
+    spline = UnivariateSpline(dtheta, refl2 - refl2.max()/2, s=0)
+    r1, r2 = spline.roots()
+    fwhm_rad = (r2 - r1) * 1e-6  # µrad → rad
+
+    # Energy resolution
+    theta_B = crystal.get_Bragg_angle(energy)
+    dE_over_E = fwhm_rad / np.tan(theta_B)
+    dE = dE_over_E * energy
+
+    # logger.info(f"DCM FWHM      : {r2-r1:.2f} µrad")
+    # logger.info(f"ΔE/E          : {dE_over_E:.2e}")
+    # logger.info(f"ΔE            : {dE:.3f} eV  at {E} eV")
+
+    return dE
+
+def cm_reflectivity(cm_stripe, cm_pitch, energy):
+    index = bl.cm.surface.index(cm_stripe)
+    rs, rp = bl.cm.material[index].get_amplitude(
+        energy,
+        np.sin(cm_pitch)
+    )[0:2]
+    refl = abs(rs)**2
+    return refl
+
+def fm_reflectivity(fm_stripe, fm_pitch, energy):
+    if fm_stripe in ('Rh (toroid)', 'Pt (toroid)'):
+        surface = bl.fm.surfaceToroid
+        material = bl.fm.materialToroid
+        stripe = re.sub(r'\s*\(.*?\)', '', fm_stripe).strip()
+        index = surface.index(stripe)
+    else:
+        surface = bl.fm.surfaceFlat
+        material = bl.fm.materialFlat
+        stripe = re.sub(r'\s*\(.*?\)', '', fm_stripe).strip()
+        index = surface.index(stripe)
+    rs, rp = material[index].get_amplitude(
+        energy,
+        np.sin(fm_pitch)
+    )[0:2]
+    refl = abs(rs)**2
+    return refl
+
+def mo1_bragg_angle(mo_mode, d_spacing, energy, cm_pitch):
+    H = 6.62606957E-34
+    E = 1.602176634E-19
+    C = 299792458
+    wl = C * H / (E * energy)
+    val = wl / (2 * d_spacing * 1e-10)
+    bragg_angle = 0
+    if val > -1 and val < 1:
+        bragg_angle = np.asin(val)
+    if mo_mode in 'Monochromatic':
+        # Add 2x CM pitch to the bragg angle
+        bragg_angle_cor =  ((2 * cm_pitch) + bragg_angle)
+    elif mo_mode in 'Pinkbeam':
+        # Align xtal surfaces parallel to beam
+        bragg_angle_cor =  (2 * cm_pitch)
+    return bragg_angle, bragg_angle_cor
+
+def fm_ideal_pitch(fm_focus, fm_stripe, smpl, sldi_hacc=None, sldi_vacc=None, fm_focx=None, fm_focy=None):
+    p = bl.fm.center[1] # posFM
+    q = smpl - bl.fm.center[1] # dist posFM to posEX
+    if fm_focus in 'Defocused':
+        a = 2 * np.tan(sldi_hacc) * bl.fm.center[1] # Beam width at focusing mirror
+        b = 2 * np.tan(sldi_vacc) * bl.cm.center[1] # Beam height at focusing mirror (collimated beam)
+        x = fm_focx
+        y = fm_focy
+        qx = q + x * p / a
+        qy = q + y * p / b
+        f = (p * qx) / (p + qx) # focal length
+    else: # Calculate for focused beam on sample in "manual" and "focused" mode
+        qy = None
+        f = (p * q) / (p + q) # focal length
+    pitch = 0
+    if 'Rh' in fm_stripe:
+        pitch = np.arcsin(bl.fm.r[0]/(2*f))# ideal pitch for FM
+    if 'Pt' in fm_stripe:
+        pitch = np.arcsin(bl.fm.r[1]/(2*f))  # ideal pitch for FM
+    return pitch, qy
+
+def cm_critical_angle(cm_stripe, energy):
+    if cm_stripe in 'Si':
+        stripe = bl.stripeSi
+    elif cm_stripe in 'Pt':
+        stripe = bl.stripePt
+    elif cm_stripe in 'Rh':
+        stripe = bl.stripeRh
+    else:
+        raise Exception(f'Stripe {stripe} not found in beamline parameters!')
+    w = CHeVcm/100/energy # convert energy [eV] to wavelength [m]
+    # Calculate critical angle for mirror
+    f1 = stripe.elements[0].Z + np.real(stripe.elements[0].get_f1f2(energy))
+    numberDensity = stripe.rho*1e3*AVOGADRO/(stripe.elements[0].mass/1e3)
+    criticalAngle = np.sqrt(numberDensity*2.8179e-15*w**2*f1/np.pi)
+    return criticalAngle
+
+
+def mirror_surface_geometries(mirror):
+    if mirror in "cm":
+        surface = bl.cm.surface
+        limOptX = bl.cm.limOptX
+        limOptY = bl.cm.limOptY
+    elif mirror in 'fm_toroid':
+        surface = bl.fm.surfaceToroid
+        limOptX = bl.fm.limOptXToroid
+        limOptY = bl.fm.limOptYToroid
+    elif mirror in 'fm_flat':
+        surface = bl.fm.surfaceFlat
+        limOptX = bl.fm.limOptXFlat
+        limOptY = bl.fm.limOptYFlat
+    else:
+        raise ValueError(f'Requested mirror {mirror} not available!')
+    geom = {}
+    for sf, lx, hx, ly, hy in zip(surface, limOptX[0], limOptX[1], limOptY[0], limOptY[1]):
+        geom[sf] = (lx, ly, hx-lx, hy-ly)
+    return geom
+
+def mo_surface_geometries(mo, plane):
+    if mo in 'mo1':
+        xtal = bl.mo1.xtal
+        xtal_width = bl.mo1.xtalWidth
+        xtal_offset_x = bl.mo1.xtalOffsetX
+        if plane == 0:
+            xtal_length = bl.mo1.xtalLength1
+        else:
+            xtal_length = bl.mo1.xtalLength2
+    else:
+        raise ValueError(f'Requested mono {mo} not available!')
+    geom = {}
+    for sf, w, offx, length in zip(xtal, xtal_width, xtal_offset_x, xtal_length):
+        geom[sf] = (offx-w/2, -length/2, w, length)
+    return geom
+
+def wall_geometries():
+    geom = []
+    for i, _ in enumerate(bl.walls.start):
+        geom.append([
+            bl.walls.start[i],
+            bl.walls.height[i][0],
+            bl.walls.end[i] - bl.walls.start[i],
+            bl.walls.height[i][1] - bl.walls.height[i][0],
+        ])
+    return geom
+
+def pipe_geometries():
+    pipes = []
+    for i, _ in enumerate(bl.vacuum_pipes.center):
+        top = bl.vacuum_pipes.center[i] + bl.vacuum_pipes.diameter[i]/2 + bl.sourceHeight
+        bottom = bl.vacuum_pipes.center[i] - bl.vacuum_pipes.diameter[i]/2 + bl.sourceHeight
+        pipes.append({
+            'x': np.array([bl.vacuum_pipes.start[i], bl.vacuum_pipes.end[i]]),
+            'y': np.array([top, top])
+        })
+        pipes.append({
+            'x': np.array([bl.vacuum_pipes.start[i], bl.vacuum_pipes.end[i]]),
+            'y': np.array([bottom, bottom])
+        })
+    return pipes

debye_bec/bec_widgets/widgets/digital_twin/digital_twin.pyproject

@@ -0,0 +1 @@
+{'files': ['digital_twin.py']}

debye_bec/bec_widgets/widgets/digital_twin/digital_twin_plugin.py

@@ -0,0 +1,57 @@
+# Copyright (C) 2022 The Qt Company Ltd.
+# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
+
+from bec_widgets.utils.bec_designer import designer_material_icon
+from qtpy.QtDesigner import QDesignerCustomWidgetInterface
+from qtpy.QtWidgets import QWidget
+
+from debye_bec.bec_widgets.widgets.digital_twin.digital_twin import DigitalTwin
+
+DOM_XML = """
+<ui language='c++'>
+    <widget class='DigitalTwin' name='digital_twin'>
+    </widget>
+</ui>
+"""
+
+
+class DigitalTwinPlugin(QDesignerCustomWidgetInterface):  # pragma: no cover
+    def __init__(self):
+        super().__init__()
+        self._form_editor = None
+
+    def createWidget(self, parent):
+        if parent is None:
+           return QWidget()
+        t = DigitalTwin(parent)
+        return t
+
+    def domXml(self):
+        return DOM_XML
+
+    def group(self):
+        return ""
+
+    def icon(self):
+        return designer_material_icon(DigitalTwin.ICON_NAME)
+
+    def includeFile(self):
+        return "digital_twin"
+
+    def initialize(self, form_editor):
+        self._form_editor = form_editor
+
+    def isContainer(self):
+        return False
+
+    def isInitialized(self):
+        return self._form_editor is not None
+
+    def name(self):
+        return "DigitalTwin"
+
+    def toolTip(self):
+        return "DigitalTwin"
+
+    def whatsThis(self):
+        return self.toolTip()

debye_bec/bec_widgets/widgets/digital_twin/move_widget.py

@@ -0,0 +1,511 @@
+import time
+import random
+import threading
+
+# import qtawesome as qta
+from bec_qthemes import material_icon
+from bec_widgets.utils.colors import get_accent_colors
+from bec_lib import bec_logger
+
+from debye_bec.devices.absorber import STATUS as ABS_STATUS
+
+from qtpy.QtCore import Qt, QThread, Signal, QObject, Property, QPropertyAnimation
+from qtpy.QtWidgets import (
+    QGroupBox, QHBoxLayout, QVBoxLayout, QLabel, QPushButton,
+    QDoubleSpinBox, QFrame, QWidget, QApplication
+)
+from qtpy.QtGui import QTransform
+
+logger = bec_logger.logger
+
+class Status:
+    IN_POSITION = "in_position"          # green  mdi.check-circle
+    NOT_IN_POSITION = "not_in_position"  # orange mdi.close-circle
+    MOVING = "moving"                    # blue   mdi.loading  (spinning)
+    ERROR = "error"                      # red    mdi.alert-circle
+
+class StatusIcon(QWidget):
+    """
+    Displays a status icon using bec_qthemes Material Design Icons.
+    Handles its own spin animation for the MOVING state via QPropertyAnimation.
+    """
+
+    ICON_SIZE = 20
+
+    _ICON_MAP = {
+        Status.IN_POSITION:     ("check_circle", "#27ae60"),
+        Status.NOT_IN_POSITION: ("cancel", "#e6d922"),
+        Status.ERROR:           ("warning", "#e74c3c"),
+        Status.MOVING:          ("cycle", "#2980b9"),
+    }
+
+    def __init__(self, parent=None):
+        super().__init__(parent=parent)
+        self._status = None
+        self._rotation = 0.0
+
+        self._label = QLabel(self)
+        self._label.setFixedSize(self.ICON_SIZE, self.ICON_SIZE)
+        self._label.setAlignment(Qt.AlignCenter)
+        self.setFixedSize(self.ICON_SIZE, self.ICON_SIZE)
+
+        self._spin_anim = QPropertyAnimation(self, b"rotation")
+        self._spin_anim.setStartValue(0)
+        self._spin_anim.setEndValue(360)
+        self._spin_anim.setDuration(1000)
+        self._spin_anim.setLoopCount(-1)  # Loop indefinitely
+
+        self.set_status(Status.NOT_IN_POSITION)
+
+    def get_rotation(self):
+        return self._rotation
+
+    def set_rotation(self, angle):
+        self._rotation = angle
+        if self._current_pixmap_base is not None:
+            cx = self._current_pixmap_base.width() / 2
+            cy = self._current_pixmap_base.height() / 2
+            t = QTransform().translate(cx, cy).rotate(angle).translate(-cx, -cy)
+            self._label.setPixmap(self._current_pixmap_base.transformed(t, Qt.SmoothTransformation))
+
+    rotation = Property(float, get_rotation, set_rotation)
+
+    def set_status(self, status: str):
+        if status == self._status:
+            return
+        self._status = status
+
+        icon_name, color = self._ICON_MAP[status]
+        icon = material_icon(icon_name, size=(self.ICON_SIZE, self.ICON_SIZE), color=color, convert_to_pixmap=True)
+        self._current_pixmap_base = icon
+
+        if status == Status.MOVING:
+            self._spin_anim.start()
+        else:
+            self._spin_anim.stop()
+            self._label.setPixmap(icon)
+
+class MotionWorker(QObject):
+    """
+    Executes motion on the specified motor and includes some safety during
+    motion for certain motors.
+    """
+    position_changed = Signal(float)
+    error = Signal(bool) # True = error
+    finished = Signal(bool)   # True = reached target, False = stopped
+
+    def __init__(self, dev, motor, target_pos: float):
+        super().__init__()
+        self.dev = dev
+        self.motor = motor
+        self._target = target_pos
+        self._stop_flag = threading.Event()
+
+    def stop(self):
+        self._stop_flag.set()
+
+    # def run(self):
+    #     logger.info(f'Would run motor {self.motor}')
+    #     simulated_run_time = 3
+    #     start = time.time()
+    #     while (time.time() - start) < simulated_run_time:
+    #         if self._stop_flag.is_set():
+    #             break
+    #         time.sleep(0.01)
+
+    #     # self.motor.move(self._target, relative=False)
+    #     # while self.motor.motor_is_moving.get():
+    #     #     if self._stop_flag.is_set():
+    #     #         self.motor.motor_stop()
+    #     #     self.position_changed.emit(self.motor.read[self.name]['value'])
+    #     #     time.sleep(0.1)
+    #     self.finished.emit(True)
+
+    def run(self):
+        match self.motor:
+            case 'sldi_gapx' | 'sldi_gapy' | 'sldi_centerx' | 'sldi_centery':
+                self.motion()
+            case 'cm_trx':
+                self.motion(abs_closed=True, surveyed_axes=[
+                    {'device': self.dev['cm_roty'], 'abs_tol': 0.05}
+                ])
+            case 'cm_roty':
+                self.motion(abs_closed=True, surveyed_axes=[
+                    {'device': self.dev['cm_trx'], 'abs_tol': 0.05}
+                ])
+            case 'cm_try':
+                self.motion(abs_closed=True, surveyed_axes=[
+                    {'device': self.dev['cm_rotx'], 'abs_tol': 0.05},
+                    {'device': self.dev['cm_rotz'], 'abs_tol': 0.05},
+                ])
+            case 'cm_rotx':
+                self.motion(abs_closed=True, surveyed_axes=[
+                    {'device': self.dev['cm_try'], 'abs_tol': 0.05},
+                    {'device': self.dev['cm_rotz'], 'abs_tol': 0.05},
+                ])
+            case 'cm_rotz':
+                self.motion(abs_closed=True, surveyed_axes=[
+                    {'device': self.dev['cm_try'], 'abs_tol': 0.05},
+                    {'device': self.dev['cm_rotx'], 'abs_tol': 0.05},
+                ])
+            case 'cm_bnd':
+                p1 = (1/(self.dev.cm_bnd_radius.read()['cm_bnd_radius']['value']*1e3) + 0.0284)/2e-6
+                p2 = (1/(self._target*1e3) + 0.0284)/2e-6
+                self._target = p2 - p1
+                self.motion(relative=True, rb=
+                    {'device': self.dev['cm_bnd_radius']}
+                )
+            case 'mo1_try' | 'mo1_trx' | 'mo1_roty':
+                self.motion(abs_closed=True)
+            case 'mo1_bragg_angle':
+                self.motion()
+            case 'sl1_centery' | 'sl1_gapy' | 'bm1_try':
+                self.motion()
+            case 'fm_trx':
+                self.motion(abs_closed=True, surveyed_axes=[
+                    {'device': self.dev['fm_roty'], 'abs_tol': 0.05}
+                ])
+            case 'fm_roty':
+                self.motion(abs_closed=True, surveyed_axes=[
+                    {'device': self.dev['fm_trx'], 'abs_tol': 0.05}
+                ])
+            case 'fm_try':
+                self.motion(abs_closed=True, surveyed_axes=[
+                    {'device': self.dev['fm_rotx'], 'abs_tol': 0.05},
+                    {'device': self.dev['fm_rotz'], 'abs_tol': 0.05},
+                ])
+            case 'fm_rotx':
+                self.motion(abs_closed=True, surveyed_axes=[
+                    {'device': self.dev['fm_try'], 'abs_tol': 0.05},
+                    {'device': self.dev['fm_rotz'], 'abs_tol': 0.05},
+                ])
+            case 'fm_rotz':
+                self.motion(abs_closed=True, surveyed_axes=[
+                    {'device': self.dev['fm_try'], 'abs_tol': 0.05},
+                    {'device': self.dev['fm_rotx'], 'abs_tol': 0.05},
+                ])
+            case 'fm_bnd':
+                p1 = (1/(self.dev.fm_bnd_radius.read()['fm_bnd_radius']['value']*1e3) + 4.28e-5)/1.84e-9
+                p2 = (1/(self._target*1e3) + 4.28e-5)/1.84e-9
+                self._target = p2 - p1
+                self.motion(relative=True, rb=
+                    {'device': self.dev['fm_bnd_radius']}
+                )
+            case 'sl2_centery' | 'sl2_gapy' | 'bm2_try':
+                self.motion()
+            case 'ot_try' | 'ot_rotx' | 'ot_es1_trz':
+                self.motion()
+            case _:
+                logger.warning(f'Motor {self.motor} not integrated in digital twin!')
+
+    def motion(self, abs_closed=False, relative=False, rb=None, surveyed_axes = None):
+        """
+        Moves an axis while surverying a set of axes (if set).
+        Example surveyed_axes:
+            [{'device': bec_device_object, 'abs_tol': 0.1},]
+
+        Args:
+            surveyed_axes (list): List of dictionaries of devices
+        """
+        if abs_closed:
+            if self.dev.abs.status.get() == ABS_STATUS.OPEN:
+                status = self.dev.abs.close()
+                # TODO Set timeout to 0.001 and check if it actually raises (it should not start motion).
+                # Check of behavior of digital twin afterwards.
+                status.wait(timeout=5)
+        if surveyed_axes is not None:
+            for surv_ax in surveyed_axes:
+                surv_ax['name'] = surv_ax['device'].dotted_name
+                surv_ax['old_value'] = surv_ax['device'].read(cached=True)[surv_ax['name']]['value']
+        if rb is not None:
+            rb['name'] = rb['device'].dotted_name
+        self.dev[self.motor].move(self._target, relative=relative)
+        time.sleep(0.5)
+        while self.dev[self.motor].motor_is_moving.get():
+            if self._stop_flag.is_set():
+                self.dev[self.motor].stop()
+                self._stop_flag.clear()
+            if rb is not None:
+                self.position_changed.emit(rb['device'].read(cached=True)[rb['name']]['value'])
+            else:
+                self.position_changed.emit(self.dev[self.motor].read(cached=True)[self.motor]['value'])
+            if surveyed_axes is not None:
+                for surv_ax in surveyed_axes:
+                    fb = surv_ax['device'].read(cached=True)[surv_ax['name']]['value']
+                    if abs(fb - surv_ax['old_value']) > surv_ax['abs_tol']:
+                        self.dev[self.motor].stop()
+                        self.error.emit(1)
+                        break
+            time.sleep(0.1)
+        self.finished.emit(True)
+
+class MoveWidget(QWidget):
+    """
+    One motor stage control group containing:
+      - Target label  (target position)
+      - Feedback label (current position)
+      - Status icon    (bec_qthemes)
+      - Start / Stop button
+    """
+
+    def __init__(self, dev, motor, label: str = '', unit=None, decimals=3, deadband=0.0):
+        super().__init__()
+        self.fb = 0.0
+        self.target = 0
+        self.dev = dev
+        self.motor = motor
+        self.deadband = deadband
+        self.status = Status.IN_POSITION
+        self._thread: QThread | None = None
+        self._worker: MotionWorker | None = None
+
+        self.text_color = (0, 0, 0)
+
+        self.unit = unit
+        self.decimals = decimals
+
+        layout = QHBoxLayout(self)
+        layout.setContentsMargins(10, 0, 0, 0)
+        layout.setSpacing(0)
+
+        # Name
+        self.label = QLabel(label)
+        self.label.setFixedWidth(100)
+        self.label.setContentsMargins(0, 0, 10, 0)
+        self.label.setWordWrap(True)
+        layout.addWidget(self.label)
+
+        # Target
+        self.target_label = QLabel('-')
+        self.target_label.setFixedWidth(100)
+        layout.addWidget(self.target_label)
+
+        # Feedback
+        self.fb_label = QLabel('-')
+        self.fb_label.setFixedWidth(100)
+        layout.addWidget(self.fb_label)
+
+        # Status icon
+        self.status_icon = StatusIcon()
+        self.status_icon.setFixedWidth(30)
+        self.status_icon.setContentsMargins(0, 0, 10, 0)
+        layout.addWidget(self.status_icon)
+
+        # Start / Stop button
+        self.btn_action = QPushButton("Move")
+        self.btn_action.setFixedWidth(90)
+        self.btn_action.setFixedHeight(20)
+        self.btn_action.clicked.connect(self._on_button_clicked)
+        layout.addWidget(self.btn_action)
+        self.btn_mode = 'start'
+
+        self._apply_button_style("start")
+
+        self.apply_theme()
+
+    def apply_theme(self, theme=None):
+        if theme is None:
+            app = QApplication.instance()
+            theme = app.theme.theme # type: ignore
+
+        if theme == "light":
+            self.text_color = {'target': (79, 163, 224), 'fb': (240, 128, 60)}
+        else: # dark theme
+            self.text_color = {'target': (26, 111, 173), 'fb':  (212, 83, 10)}
+        r, g, b = self.text_color['target']
+        self.target_label.setStyleSheet(f'QLabel {{color: rgb({r}, {g}, {b})}}')
+        r, g, b = self.text_color['fb']
+        self.fb_label.setStyleSheet(f'QLabel {{color: rgb({r}, {g}, {b})}}')
+
+        if self.btn_mode == 'start':
+            self.btn_action.setStyleSheet(
+                f"QPushButton {{background-color: {get_accent_colors().success.name()}; color: white;}}"
+            )
+        else:
+            self.btn_action.setStyleSheet(
+                f"QPushButton {{background-color: {get_accent_colors().emergency.name()}; color: white;}}"
+            )
+
+    def set_target(self, target):
+        self.target = target
+        text = f'{target:.{int(self.decimals)}f}'
+        if self.unit is not None:
+            text = text + ' ' + self.unit
+        self.target_label.setText(text)
+        self._on_target_or_fb_changed()
+
+    def set_feedback(self, fb):
+        if self.status != Status.MOVING:
+            self.fb = fb
+            text = f'{fb:.{int(self.decimals)}f}'
+            if self.unit is not None:
+                text = text + ' ' + self.unit
+            self.fb_label.setText(text)
+            self._on_target_or_fb_changed()
+
+    def _apply_button_style(self, mode: str):
+        self.btn_mode = mode
+        if mode == "start":
+            self.btn_action.setText("Move")
+            self.btn_action.setStyleSheet(
+            f"QPushButton {{background-color: {get_accent_colors().success.name()}; color: white;}}"
+        )
+        else:  # stop
+            self.btn_action.setText("Stop")
+            self.btn_action.setStyleSheet(
+            f"QPushButton {{background-color: {get_accent_colors().emergency.name()}; color: white;}}"
+        )
+
+    def _set_status(self, status: str):
+        self.status = status
+        self.status_icon.set_status(status)
+
+    def _on_target_or_fb_changed(self):
+        """Re-evaluate in-position status whenever the target value changes."""
+        if self.status in (Status.ERROR, Status.MOVING):
+            return
+        if abs(self.fb - self.target) <= self.deadband:
+            self._set_status(Status.IN_POSITION)
+        else:
+            self._set_status(Status.NOT_IN_POSITION)
+
+    def _on_button_clicked(self):
+        if self._thread and self._thread.isRunning():
+            self._stop_motion()
+        else:
+            self._start_motion()
+
+    def _start_motion(self):
+        target = self.target
+        if abs(target - self.fb) <= self.deadband:
+            self._set_status(Status.IN_POSITION)
+            return
+
+        self._set_status(Status.MOVING)
+        self._apply_button_style("stop")
+
+        self._worker = MotionWorker(self.dev, self.motor, target)
+        self._thread = QThread()
+        self._worker.moveToThread(self._thread)
+
+        self._thread.started.connect(self._worker.run)
+        self._worker.position_changed.connect(self._on_position_changed)
+        self._worker.error.connect(self._on_error)
+        self._worker.error.connect(self._thread.quit)
+        self._worker.finished.connect(self._on_motion_finished)
+        self._worker.finished.connect(self._thread.quit)
+        self._thread.finished.connect(self._cleanup_thread)
+
+        self._thread.start()
+
+    def _on_error(self):
+        self._set_status(Status.ERROR)
+        self._apply_button_style("start")
+
+    def _stop_motion(self):
+        if self._worker:
+            self._worker.stop()
+
+    def _on_position_changed(self, pos: float):
+        self.fb = pos
+        text = f'{pos:.{int(self.decimals)}f}'
+        if self.unit is not None:
+            text = text + ' ' + self.unit
+        self.fb_label.setText(text)
+
+    def _on_motion_finished(self, reached: bool):
+        target = self.target
+        if self.status not in Status.ERROR:
+            if abs(self.fb - target) <= self.deadband:
+                self._set_status(Status.IN_POSITION)
+            else:
+                self._set_status(Status.NOT_IN_POSITION)
+        self._apply_button_style("start")
+
+    def _cleanup_thread(self):
+        if self._thread:
+            self._thread.deleteLater()
+            self._thread = None
+        if self._worker:
+            self._worker.deleteLater()
+            self._worker = None
+
+    def shutdown(self):
+        if self._worker:
+            self._worker.stop()
+        if self._thread:
+            self._thread.quit()
+            self._thread.wait(2000)  # max 2 s grace period
+
+class AbsorberWidget(QWidget):
+    """
+    Control of the frontend absorber (only open)
+    """
+
+    def __init__(self, absorber, label: str = 'Absorber'):
+        super().__init__()
+        self.absorber = absorber
+        self.fb = False
+        self.text_color = (0, 0, 0)
+
+        layout = QHBoxLayout(self)
+        layout.setContentsMargins(10, 0, 0, 0)
+        layout.setSpacing(0)
+
+        # Name
+        self.label = QLabel(label)
+        self.label.setFixedWidth(100)
+        self.label.setContentsMargins(0, 0, 10, 0)
+        self.label.setWordWrap(True)
+        layout.addWidget(self.label)
+
+        # Blank
+        self.blank_label = QLabel('')
+        self.blank_label.setFixedWidth(100)
+        layout.addWidget(self.blank_label)
+
+        # Feedback
+        self.fb_label = QLabel('-')
+        self.fb_label.setFixedWidth(100)
+        layout.addWidget(self.fb_label)
+
+        # Blank icon
+        self.blank_icon = QLabel('')
+        self.blank_icon.setFixedWidth(30)
+        self.blank_icon.setContentsMargins(0, 0, 10, 0)
+        layout.addWidget(self.blank_icon)
+
+        # Open
+        self.btn_action = QPushButton("Open")
+        self.btn_action.setFixedWidth(90)
+        self.btn_action.setFixedHeight(20)
+        self.btn_action.clicked.connect(self._on_button_clicked)
+        layout.addWidget(self.btn_action)
+
+    def set_feedback(self, fb: bool):
+        self.fb = fb
+        if fb:
+            self.fb_label.setText('Open')
+            self.fb_label.setStyleSheet(
+                f"QLabel {{color: {get_accent_colors().success.name()}}}"
+            )
+        else:
+            self.fb_label.setText('Closed')
+            self.fb_label.setStyleSheet(
+                f"QLabel {{color: {get_accent_colors().emergency.name()}}}"
+            )
+
+    def enable_open(self, enable: bool = False):
+        if enable:
+            self.btn_action.setStyleSheet(
+                f"QPushButton {{background-color: {get_accent_colors().success.name()}; color: white;}}"
+            )
+            self.btn_action.setEnabled(True)
+        else:  # disabled
+            self.btn_action.setStyleSheet(
+                "QPushButton {{background-color: rgb(120, 120, 120); color: white;}}"
+            )
+            self.btn_action.setDisabled(True)
+
+    def _on_button_clicked(self):
+        self.absorber.open()

debye_bec/bec_widgets/widgets/digital_twin/register_digital_twin.py

@@ -0,0 +1,15 @@
+def main():  # pragma: no cover
+    from qtpy import PYSIDE6
+
+    if not PYSIDE6:
+        print("PYSIDE6 is not available in the environment. Cannot patch designer.")
+        return
+    from PySide6.QtDesigner import QPyDesignerCustomWidgetCollection
+
+    from debye_bec.bec_widgets.widgets.digital_twin.digital_twin_plugin import DigitalTwinPlugin
+
+    QPyDesignerCustomWidgetCollection.addCustomWidget(DigitalTwinPlugin())
+
+
+if __name__ == "__main__":  # pragma: no cover
+    main()

debye_bec/bec_widgets/widgets/qt_widgets.py

@@ -0,0 +1,272 @@
+
+from functools import partial
+# pylint: disable=E0611
+from qtpy.QtWidgets import (
+    QWidget, QVBoxLayout, QHBoxLayout, QLabel, QLineEdit,
+    QPushButton, QGroupBox, QComboBox, QApplication, QDoubleSpinBox
+)
+from qtpy.QtGui import QFont
+from qtpy.QtCore import Qt
+
+from bec_widgets.utils.colors import get_accent_colors
+
+class Group(QGroupBox):
+    def __init__(self, label, widgets):
+        super().__init__(label)
+        self.layout = QVBoxLayout(self) # type: ignore
+        for widget in widgets:
+            self.layout.addWidget(widget) # type: ignore
+
+class NumberIndicator(QWidget):
+    def __init__(self, label='', unit=None, highlight=False, decimals=3):
+        super().__init__()
+        layout = QHBoxLayout(self)
+        layout.setContentsMargins(10, 0, 0, 0)
+        layout.setSpacing(0)
+        self.label = QLabel(label)
+        self.label.setFixedWidth(140)
+        self.label.setContentsMargins(0, 0, 10, 0)
+        self.label.setWordWrap(True)
+        layout.addWidget(self.label)
+        self.val = QLabel('-')
+        self.val.setAlignment(Qt.AlignTop) # type: ignore
+        # self.val.setFixedWidth(140)
+        layout.addWidget(self.val)
+        self.unit = unit
+        self.highlight = highlight
+        self.decimals = decimals
+        self.number = 0
+        if highlight:
+            font = QFont()
+            font.setBold(True)
+            font.setPointSize(14)
+            self.label.setFont(font)
+            self.val.setFont(font)
+
+    def value(self) -> float:
+        return self.number
+
+    def setLabel(self, label) -> None:
+        self.label.setText(label)
+
+    def setValue(self, number):
+        self.number = number
+        text = f'{number:.{int(self.decimals)}f}'
+        if self.unit is not None:
+            text = text + ' ' + self.unit
+        self.val.setText(text)
+
+class InputNumberField(QWidget):
+    def __init__(self, identifier='', label='', unit=None, prefix=None, init=0.0, decimals=1, single_step=0.1, ll=-1e6, hl=1e6):
+        super().__init__()
+        layout = QHBoxLayout(self)
+        layout.setContentsMargins(10, 0, 0, 0)
+        layout.setSpacing(0)
+        self.identifier = identifier
+        self.label = QLabel(label)
+        self.label.setFixedWidth(140)
+        self.label.setContentsMargins(0, 0, 10, 0)
+        self.label.setWordWrap(True)
+        layout.addWidget(self.label)
+        self.val = QDoubleSpinBox()
+        self.val.setRange(ll, hl)
+        self.val.setDecimals(decimals)
+        self.val.setSingleStep(single_step)
+        self.val.setValue(init)
+        if unit is not None:
+            self.val.setSuffix(' ' + unit)
+        if prefix is not None:
+            self.val.setPrefix(prefix + ' ')
+        # self.val.setFixedWidth(140)
+        layout.addWidget(self.val)
+
+    def set_number(self, number):
+        self.val.setValue(number)
+
+    def has_focus(self) -> bool:
+        return self.val.hasFocus()
+    
+    def value(self) -> float:
+        return self.val.value()
+
+    def value_changed_connect(self, func):
+        """Connect a function to the Enter/Return key press."""
+        self.val.valueChanged.connect(
+            partial(func, identifier=self.identifier, value_obj=self.val, value=lambda: self.val.value())
+        )
+
+class ComboBox(QWidget):
+    def __init__(self, identifier='', label='', enums=[]):
+        super().__init__()
+        layout = QHBoxLayout(self)
+        layout.setContentsMargins(10, 0, 0, 0)
+        layout.setSpacing(0)
+        self.identifier = identifier
+        self.label = QLabel(label)
+        self.label.setFixedWidth(140)
+        self.label.setContentsMargins(0, 0, 10, 0)
+        self.label.setWordWrap(True)
+        layout.addWidget(self.label)
+        self.value = QComboBox()
+        for entry in enums:
+            self.value.addItem(entry)
+        layout.addWidget(self.value)
+
+    def set_current_text(self, text):
+        self.value.setCurrentText(text)
+
+    def currentText(self) -> str:
+        return self.value.currentText()
+
+    def has_focus(self) -> bool:
+        return QApplication.focusWidget() is self.value.view()
+
+    def activated_connect(self, func):
+        """Connect a function to the Enter/Return key press."""
+        self.value.activated.connect(
+            partial(func, identifier=self.identifier, value_obj=self.value, value=lambda: self.value.currentText())
+        )
+
+    def setDisabled(self, disable):
+        self.value.setDisabled(disable)
+
+class Button(QWidget):
+    def __init__(self, label=None, label_button:str='', enabled=False):
+        super().__init__()
+        layout = QHBoxLayout(self)
+        layout.setContentsMargins(10, 0, 0, 0)
+        layout.setSpacing(0)
+        if label is not None:
+            self.label = QLabel(label)
+            self.label.setFixedWidth(140)
+            layout.addWidget(self.label)
+        self.button = QPushButton(label_button)
+        if label is not None:
+            self.button.setFixedWidth(160)
+        self.enable_button(enabled)
+        layout.addWidget(self.button)
+
+    def clicked_connect(self, func):
+        """Connect a function to the button press."""
+        self.button.clicked.connect(func)
+
+    def enable_button(self, enable: bool = False):
+        if enable:
+            self.button.setStyleSheet(
+                f"QPushButton {{background-color: {get_accent_colors().default.name()}; color: white;}}"
+            )
+            self.button.setEnabled(True)
+        else:  # disabled
+            self.button.setStyleSheet(
+                "QPushButton {{background-color: rgb(120, 120, 120); color: white;}}"
+            )
+            self.button.setDisabled(True)
+
+    def setText(self, text):
+        self.button.setText(text)
+
+# class TextIndicator(QWidget):
+#     def __init__(self, label, unit=None, highlight=False):
+#         super().__init__()
+#         layout = QHBoxLayout(self)
+#         layout.setContentsMargins(10, 0, 0, 0)
+#         layout.setSpacing(0)
+#         self.label = QLabel(label)
+#         self.label.setFixedWidth(150)
+#         layout.addWidget(self.label)
+#         self.value = QLabel('-')
+#         self.value.setFixedWidth(160)
+#         layout.addWidget(self.value)
+#         self.unit = unit
+#         self.highlight = highlight
+#         if highlight:
+#             font = QFont()
+#             font.setBold(True)
+#             font.setPointSize(14)
+#             self.label.setFont(font)
+#             self.value.setFont(font)
+
+#     def set_text(self, text):
+#         if self.unit is not None:
+#             text = text + ' ' + self.unit
+#         self.value.setText(text)
+
+# class Button(QWidget):
+#     def __init__(self, label, label_button):
+#         super().__init__()
+#         layout = QHBoxLayout(self)
+#         layout.setContentsMargins(10, 0, 0, 0)
+#         layout.setSpacing(0)
+#         self.label = QLabel(label)
+#         self.label.setFixedWidth(150)
+#         layout.addWidget(self.label)
+#         self.button = QPushButton(label_button)
+#         self.button.setStyleSheet("color: black; background-color: dodgerblue;")
+#         self.button.setFixedWidth(160)
+#         layout.addWidget(self.button)
+
+#     def set_on_press(self, func):
+#         """Connect a function to the button press."""
+#         self.button.clicked.connect(func)
+
+#     def enable_button(self):
+#         self.button.setEnabled(True)
+#         self.button.setStyleSheet("color: black; background-color: dodgerblue;")
+
+#     def disable_button(self):
+#         self.button.setEnabled(False)
+#         self.button.setStyleSheet("color: black; background-color: grey;")
+
+#     def set_button_text(self, text):
+#         self.button.setText(text)
+
+# class LED(QWidget):
+#     def __init__(self, states, colors, label):
+#         super().__init__()
+#         self.states = states
+#         self.colors = colors
+#         layout = QHBoxLayout(self)
+#         layout.setContentsMargins(10, 0, 0, 0)
+#         layout.setSpacing(0)
+#         self.label = QLabel(label)
+#         self.label.setFixedWidth(150)
+#         layout.addWidget(self.label)
+#         self.led = QLabel()
+#         self.led.setFixedWidth(160)
+#         layout.addWidget(self.led)
+
+#     def apply_color(self, val):
+#         color = self.colors[self.states.index(val)]
+#         self.led.setStyleSheet(f"background-color: {color}; border: 1px solid black;")
+
+# class InputTextField(QWidget):
+#     def __init__(self, topic, label):
+#         super().__init__()
+#         self.topic = topic
+#         layout = QHBoxLayout(self)
+#         layout.setContentsMargins(10, 0, 0, 0)
+#         layout.setSpacing(0)
+#         self.label = QLabel(label)
+#         self.label.setFixedWidth(140)
+#         self.label.setContentsMargins(0, 0, 10, 0)
+#         self.label.setWordWrap(True)
+#         layout.addWidget(self.label)
+#         self.val = QLineEdit()
+#         self.val.setPlaceholderText('0')
+#         # self.val.setFixedWidth(140)
+#         layout.addWidget(self.val)
+
+#     def set_text(self, text):
+#         self.val.setText(text)
+
+#     def has_focus(self) -> bool:
+#         return self.val.hasFocus()
+
+#     def text(self) -> str:
+#         return self.val.text()
+
+#     def set_on_return(self, func):
+#         """Connect a function to the Enter/Return key press."""
+#         self.val.returnPressed.connect(
+#             partial(func, self.val, self.topic, lambda: self.val.text())
+#         )

debye_bec/bec_widgets/widgets/x01da_offsets.yaml

@@ -0,0 +1,50 @@
+cm_try:
+  offset: 0.15
+
+mo1_trx:
+  modifier:
+    axis: mo1_trx
+    range: [[-30, -0.1], [0.1, 30]]
+  offset: [0, 2.21]
+
+mo1_try:
+  modifier:
+    axis: mo1_trx
+    range: [[-30, -0.1], [0.1, 30]]
+  offset: [0, -1.6]
+
+sl1_centery:
+  offset: -1.8
+
+fm_trx:
+  modifier:
+    axis: fm_trx
+    range: [[-66, -31], [-24, 7], [11, 31], [38, 66]]
+  offset: [0, 0, 0, -0.16]
+
+fm_try:
+  modifier:
+    axis: fm_trx
+    range: [[-66, -31], [-24, 7], [11, 31], [38, 66]]
+  offset: [0, 0, 0, -0.45]
+
+fm_rotx:
+  modifier:
+    axis: fm_trx
+    range: [[-66, -31], [-24, 7], [11, 31], [38, 66]]
+  offset: [0, 0, 0, 0.063]
+
+fm_roty:
+  modifier:
+    axis: fm_trx
+    range: [[-66, -31], [-24, 7], [11, 31], [38, 66]]
+  offset: [0, 0, 0, -0.04]
+
+sl2_centery:
+  offset: 1.2
+
+ot_try:
+  offset: 0
+
+ot_rotx:
+  offset: 0

debye_bec/bec_widgets/widgets/x01da_parameters.py

@@ -0,0 +1,311 @@
+"""
+X01DA / Debye Beamline Parameters.
+This file describes the parameter of each component of the Debye beamline
+to be used for raytracing and geometrical calculations.
+"""
+
+import os
+import numpy as np
+from collections import namedtuple
+
+import xrt.backends.raycing.materials as rm
+
+# if os.environ.get("USE_XRT", "True").lower() in ("1", "true", "yes"):
+#     import xrt.backends.raycing.materials as rm  # type: ignore
+# else:
+#     class _DummyClass:
+#         def __init__(self, *args, **kwargs):
+#             pass
+#     class _DummyMaterials:
+#         Material = _DummyClass
+#         CrystalSi = _DummyClass
+#     rm = _DummyMaterials()
+
+# XRT definitions
+filterBeryl     = rm.Material('Be', rho=1.85,  kind='plate') # pyright: ignore[reportArgumentType]
+filterDiamond   = rm.Material('C',  rho=3.52,  kind='plate') # pyright: ignore[reportArgumentType]
+filterGraphite  = rm.Material('C',  rho=2.266, kind='plate') # pyright: ignore[reportArgumentType]
+
+stripeSi    = rm.Material('Si', rho=2.33) # pyright: ignore[reportArgumentType]
+stripePt    = rm.Material('Pt', rho=21.45) # pyright: ignore[reportArgumentType]
+stripeRh    = rm.Material('Rh', rho=12.41) # pyright: ignore[reportArgumentType]
+stripeCr    = rm.Material('Cr', rho=7.14) # pyright: ignore[reportArgumentType]
+stripePyrex = rm.Material('Si', rho=2.20) # Use Si as bare element and the density of SiO2 # pyright: ignore[reportArgumentType]
+
+si111_1 = rm.CrystalSi(hkl=(1, 1, 1), tK=77) # first xtal surface
+si311_1 = rm.CrystalSi(hkl=(3, 1, 1), tK=77) # first xtal surface
+si333_1 = rm.CrystalSi(hkl=(3, 3, 3), tK=77) # first xtal surface
+si511_1 = rm.CrystalSi(hkl=(5, 1, 1), tK=77) # first xtal surface
+si111_2 = rm.CrystalSi(hkl=(1, 1, 1), tK=77) # second xtal surface
+si311_2 = rm.CrystalSi(hkl=(3, 1, 1), tK=77) # second xtal surface
+si333_2 = rm.CrystalSi(hkl=(3, 3, 3), tK=77) # second xtal surface
+si511_2 = rm.CrystalSi(hkl=(5, 1, 1), tK=77) # second xtal surface
+
+filterDiamond = rm.Material('C', rho=3.52, kind='plate') # pyright: ignore[reportArgumentType]
+filterBe = rm.Material('Be', rho=1.85, kind='plate') # pyright: ignore[reportArgumentType]
+filterSi3N4 = rm.Material(['Si', 'N'], quantities=[3, 4], rho=3.44, kind='plate') # pyright: ignore[reportArgumentType]
+filterAl = rm.Material('Al', rho=2.69, kind='plate') # pyright: ignore[reportArgumentType]
+filterGraphite = rm.Material('C', rho=2.266, kind='plate') # pyright: ignore[reportArgumentType]
+
+# General parameters
+sourceHeight = 0
+
+#Synchrotron
+synchrotron = namedtuple('synchrotron', ['eE', 'eI', 'eEspread',
+    'eEpsilonX', 'eEpsilonZ', 'betaX', 'betaZ'])
+
+sls1 = synchrotron(
+    eE = 2.4,
+    eI = 0.4,
+    eEspread=0.878e-3,
+    eEpsilonX=5.63,
+    eEpsilonZ=0.007,
+    betaX=0.45,
+    betaZ=14.4,
+    )
+    
+sls2 = synchrotron(
+    eE=2.7,
+    eI=0.4,
+    eEspread=1.147e-3,
+    eEpsilonX=0.156,
+    eEpsilonZ=0.01,
+    betaX=0.18,
+    betaZ=4.6,
+    )
+    
+# Source
+bendingMagnet = namedtuple('bendingMagnet', ['name', 'center', 'sync', 'B0'])    
+
+sls1_14t = bendingMagnet(
+    name='FE-BM-SLS1-1.4T',
+    center=(0, 0, 0),
+    sync=sls1,
+    B0=1.4,)
+    
+sls2_21t = bendingMagnet(
+    name='FE-BM-SLS2-2.1T',
+    center=(0, 0, 0),
+    sync=sls2,
+    B0=2.1,)
+    
+sls2_35t = bendingMagnet(
+    name='FE-BM-SLS2-3.5T',
+    center=(0, 0, 0),
+    sync=sls2,
+    B0=3.5,)
+    
+sls2_50t = bendingMagnet(
+    name='FE-BM-SLS2-5.0T',
+    center=(0, 0, 0),
+    sync=sls2,
+    B0=5.0,)
+    
+# FE slits
+fe_slits = namedtuple('slits', ['name', 'center', 'center1', 'center2', 'maxDivH', 'maxDivV'])
+
+feSlits = fe_slits(
+    name='FE-SLITS',
+    center=(0, 6117, sourceHeight),
+    center1=(0, 5045, sourceHeight),
+    center2=(0, 5289.5, sourceHeight),
+    maxDivH=1.8e-3,
+    maxDivV=0.8e-3,)
+    
+# FE Window
+filt = namedtuple('filt', ['name', 'center', 'pitch', 'limPhysX', 'limPhysY', 'surface', 'material', 'thickness'])
+
+feWindow = filt(
+    name='FE-WINDOW',
+    center=(0., 7020, sourceHeight),
+    pitch=np.pi/2,
+    limPhysX=(-6, 6),
+    limPhysY=(-3., 3.),
+    surface='None',
+    material=filterDiamond,
+    thickness=0.1,) 
+feWindow = feWindow._replace(surface=f'CVD Diamond window {feWindow.thickness*1e3:0.0f} $\\mu$m')   
+
+# Collimating mirror 
+collimatingMirror = namedtuple('collimatingMirror', ['name',
+    'center', 'surface', 'material', 'limPhysX', 'limPhysY',
+    'limOptX', 'limOptY', 'R', 'pitch', 'jack1', 'jack2', 'jack3',
+    'tx1', 'tx2'])    
+    
+cm = collimatingMirror(
+    name='FE-CM',
+    center=[0, 6890, sourceHeight],
+    surface=('Si','Pt','Rh'),
+    material=(stripeSi, stripePt, stripeRh),
+    limPhysX=(-34, 34),
+    limPhysY=(-600, 600),
+    limOptX=((-21, -7, 14), (-11, 11, 23)),
+    limOptY=((-500, -500, -500), (500, 500, 500)),
+    R=[3e6, 15e6],
+    pitch=[-5.0e-3, -0.0e-3],
+    jack1=[0., 7210., 0.], #Tripod X, Y, Z (global)
+    jack2=[-210., 8310., 0.],
+    jack3=[210., 8310., 0.],
+    tx1=[0.0, -575.5], # X-Stage 1 [x, y] (local)
+    tx2=[0.0, 575],) # X-Stage 2  
+    
+apertures = namedtuple('apertures', ['name', 'center', 'opening'])
+
+fePS = apertures(
+    name='FE-PS',
+    center=[0, 8815, sourceHeight],
+    opening=[-20., 20., -20.+12.5, 20.+12.5]) # left, right, bottom, top
+    
+opWbBsBlock = apertures(
+    name='OP-WB-BS-BLOCK',
+    center=[0., 13860, sourceHeight],
+    opening=[-18., 18., 25, 85.5]) # left, right, bottom, top
+    # opening=[-18., 18., 42, 76], # X10DA
+
+# Monochromator
+monochromator = namedtuple('monochromator', ['name', 'center',
+    'xtal', 'material1', 'material2', 'xtalWidth', 'xtalOffsetX',
+    'xtalLength1', 'xtalLength2', 'xtalGap', 'rotOffset',
+    'heightOffset', 'braggLim', 'jack1', 'jack2', 'jack3', 'tx'])  
+
+mo1 = monochromator(
+    name='OP-MO1',
+    center=[0., 11750, sourceHeight],
+    xtal=('Si311','Si111'),
+    material1=(si311_1, si111_1),
+    material2=(si311_2, si111_2),
+    xtalWidth = (24, 24),
+    xtalOffsetX=(-21.2, 21.2),
+    xtalLength1 = (55, 55),
+    xtalLength2 = (105, 105),
+    xtalGap = (8, 8),
+    rotOffset = 6,
+    heightOffset = 8.5,
+    braggLim = [3.6, 33],
+    jack1=[0., 11350., 0.], #Tripod maybe not available!
+    jack2=[-400., 12350., 0.],
+    jack3=[400., 12350., 0.],
+    tx=0.0,) # X-Stage [x]
+    
+mo2 = monochromator(
+    name='OP-CCM2',
+    center=[0., 13250, sourceHeight],
+    xtal=('Si311','Si111'),
+    material1=(si311_1, si111_1),
+    material2=(si311_2, si111_2),
+    xtalWidth = (24, 24),
+    xtalOffsetX=(-21, 21),
+    xtalLength1 = (55, 55),
+    xtalLength2 = (105, 105),
+    xtalGap = (8, 8),
+    rotOffset = 6,
+    heightOffset = 8.5,
+    braggLim = [3.6, 33],
+    jack1=[0., 13350., 0.], #Tripod maybe not available!
+    jack2=[-400., 14350., 0.],
+    jack3=[400., 14350., 0.],
+    tx=0.0,) # X-Stage [x]
+
+# OP Slits
+op_slits = namedtuple('op_slits', ['name', 'center'])
+
+opSlits1 = op_slits(
+    name='OP-SLITS 1',
+    center=(0, 14349.6, sourceHeight),
+)
+
+opSlits2 = op_slits(
+    name='OP-SLITS 2',
+    center=(0, 18134.8, sourceHeight),
+)
+
+# OP Beam Monitors
+op_bm = namedtuple('op_bm', ['name', 'center'])
+
+opBM1 = op_bm(
+    name='OP Beam Monitor 1',
+    center=(0, 14599.6, sourceHeight),
+)
+
+opBM2 = op_bm(
+    name='OP Beam Monitor 2',
+    center=(0, 18384.8, sourceHeight),
+)
+    
+# Focusing mirror 
+focusingMirror = namedtuple('focusingMirror', ['name', 'center',
+    'surfaceToroid', 'materialToroid', 'surfaceFlat', 'materialFlat',
+    'limPhysXToroid', 'limPhysYToroid', 'limPhysXFlat', 'limPhysYFlat',
+    'limOptXToroid', 'limOptYToroid', 'limOptXFlat', 'limOptYFlat',
+    'R', 'pitch', 'r', 'xToroid', 'xFlat', 'hToroid', 'jack1', 'jack2', 'jack3',
+    'tx1', 'tx2'])   
+    
+fm = focusingMirror(
+    name='OP-FM',
+    center=[0., 15670, sourceHeight], # nominal height 58 mm above ring, SLS1!
+    surfaceToroid=('Rh', 'Pt'),
+    materialToroid=(stripeRh, stripePt),
+    surfaceFlat=('Rh', 'Pt'),
+    materialFlat=(stripeRh, stripePt),
+    limPhysXToroid=(-79., 79.),
+    limPhysYToroid=(-575., 575.),
+    limPhysXFlat=(-79., 79.),
+    limPhysYFlat=(-575., 575.),
+    limOptXToroid=((-38, 66), (-66, 31)),
+    limOptYToroid=((-500., -500.), (500., 500.)),
+    limOptXFlat=((-11.45, 23.55), (-30.45, -6.45)),
+    limOptYFlat=((-500., -500.), (500., 500.)),
+    R=[3e6, 15e6],
+    pitch=[-5.0e-3, 0e-3],
+    r=[35.510, 24.986],
+    xToroid=[-52, 48.5], # offset in local x
+    xFlat = [-20.95, 8.55],
+    hToroid=[2.88, 7.15], # depth of the cylinder at x = xCylinder1 and x = xCylinder2.
+    jack1=[-130., 15535-538., 0.],
+    jack2=[130., 15535+538., 0.],
+    jack3=[0., 15535+538., 0.],
+    tx1=[0., -575.], # X-Stage 1 [x, y]
+    tx2=[0., 575.],) # X-Stage 2 [x, y]
+
+# EH Window
+ehWindow = filt(
+    name='EH-WINDOW',
+    center=(0., 19998.3, sourceHeight),
+    pitch=np.pi/2,
+    limPhysX=(-20., 20.),
+    limPhysY=(-4, 4),
+    surface='None',
+    material=filterSi3N4,
+    thickness=0.002,)
+ehWindow = ehWindow._replace(surface=f'Beryllium window {ehWindow.thickness*1e3:0.0f} $\\mu$m')  
+    
+# Sample
+sample = namedtuple('sample', ['name', 'center'])
+
+smpl = sample(
+    name='EH-SMPL',
+    center=[0, 23365, sourceHeight],)
+
+smpl2 = sample(
+    name='EH-SMPL2',
+    center=[0, 27500, sourceHeight],)
+
+# Vacuum pipes
+# DN40CF ID = 35 mm oder 37 mm
+# DN50CF ID = 47.5 mm
+# DN63CF ID = 60.2 mm oder 66 mm
+# DN100CF ID = 97.4 mm oder 104 mm
+pipe = namedtuple('pipes', ['center', 'diameter', 'start', 'end'])
+vacuum_pipes = pipe(
+    center=  [27.5,            (37.5+27.5)/2,                37.5,              62.5,                 72.5],
+    diameter=[97.4,                     97.4,                97.4,              97.4,                 97.4],
+    start=   [10952.88,            11750+250,   mo2.center[1]+250,             14000,         fm.center[1]],
+    end=     [11750-250,   mo2.center[1]-250,               14000,      fm.center[1],   ehWindow.center[1]],
+)
+
+Walls = namedtuple('walls', ['start', 'end', 'height'])
+walls = Walls(
+    start=  [13999.30],
+    end=    [13999+75.5+30],
+    height= [[-20, 25]],
+)

debye_bec/device_configs/x01da_experimental_hutch.yaml

@@ -5,7 +5,7 @@
 ot_tryu:
   readoutPriority: baseline
   description: Optical Table Y-Translation Upstream
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES-OT:TRYU
   onFailure: retry
@@ -15,7 +15,7 @@ ot_tryu:
 ot_tryd:
   readoutPriority: baseline
   description: Optical Table Y-Translation Downstream
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES-OT:TRYD
   onFailure: retry
@@ -25,7 +25,7 @@ ot_tryd:
 ot_es1_trz:
   readoutPriority: baseline
   description: Optical Table ES1 Z-Translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-OT:TRZ
   onFailure: retry
@@ -35,7 +35,7 @@ ot_es1_trz:
 ot_es2_trz:
   readoutPriority: baseline
   description: Optical Table ES2 Z-Translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES2-OT:TRZ
   onFailure: retry
@@ -45,17 +45,17 @@ ot_es2_trz:
 ot_try:
   readoutPriority: baseline
   description: Optical Table Y-Translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES-OT:TRY
   onFailure: retry
   enabled: true
   softwareTrigger: false
 
-ot_pitch:
+ot_rotx:
   readoutPriority: baseline
   description: Optical Table Pitch
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES-OT:ROTX
   onFailure: retry
@@ -69,7 +69,7 @@ ot_pitch:
 es0wi_try:
   readoutPriority: baseline
   description: End Station 0 Exit Window Y-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES0-WI:TRY
   onFailure: retry
@@ -97,7 +97,7 @@ es0filter:
 es0sl_trxr:
   readoutPriority: baseline
   description: End Station slits X-translation Ring-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES0-SL:TRXR
   onFailure: retry
@@ -107,7 +107,7 @@ es0sl_trxr:
 es0sl_trxw:
   readoutPriority: baseline
   description: End Station slits X-translation Wall-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES0-SL:TRXW
   onFailure: retry
@@ -117,7 +117,7 @@ es0sl_trxw:
 es0sl_tryb:
   readoutPriority: baseline
   description: End Station slits Y-translation Bottom-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES0-SL:TRYB
   onFailure: retry
@@ -127,7 +127,7 @@ es0sl_tryb:
 es0sl_tryt:
   readoutPriority: baseline
   description: End Station slits X-translation Top-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES0-SL:TRYT
   onFailure: retry
@@ -137,7 +137,7 @@ es0sl_tryt:
 es0sl_center:
   readoutPriority: baseline
   description: End Station slits X-center
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES0-SL:CENTERX
   onFailure: retry
@@ -147,7 +147,7 @@ es0sl_center:
 es0sl_gapx:
   readoutPriority: baseline
   description: End Station slits X-gap
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES0-SL:GAPX
   onFailure: retry
@@ -157,7 +157,7 @@ es0sl_gapx:
 es0sl_centery:
   readoutPriority: baseline
   description: End Station slits Y-center
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES0-SL:CENTERY
   onFailure: retry
@@ -167,7 +167,7 @@ es0sl_centery:
 es0sl_gapy:
   readoutPriority: baseline
   description: End Station slits Y-gap
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES0-SL:GAPY
   onFailure: retry
@@ -195,7 +195,7 @@ es1_alignment_laser:
 es1man_trx:
   readoutPriority: baseline
   description: End Station sample manipulator X-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-MAN1:TRX
   onFailure: retry
@@ -205,7 +205,7 @@ es1man_trx:
 es1man_try:
   readoutPriority: baseline
   description: End Station sample manipulator Y-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-MAN1:TRY
   onFailure: retry
@@ -215,7 +215,7 @@ es1man_try:
 es1man_trz:
   readoutPriority: baseline
   description: End Station sample manipulator Z-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-MAN1:TRZ
   onFailure: retry
@@ -225,7 +225,7 @@ es1man_trz:
 es1man_roty:
   readoutPriority: baseline
   description: End Station sample manipulator Y-rotation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-MAN1:ROTY
   onFailure: retry
@@ -239,7 +239,7 @@ es1man_roty:
 es1arc_roty:
   readoutPriority: baseline
   description: End Station segmented arc Y-rotation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-ARC:ROTY
   onFailure: retry
@@ -249,7 +249,7 @@ es1arc_roty:
 es1det1_trx:
   readoutPriority: baseline
   description: End Station SDD 1 X-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-DET1:TRX
   onFailure: retry
@@ -259,7 +259,7 @@ es1det1_trx:
 es1bm1_trx:
   readoutPriority: baseline
   description: End Station X-ray Eye X-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-BM1:TRX
   onFailure: retry
@@ -269,7 +269,7 @@ es1bm1_trx:
 es1det2_trx:
   readoutPriority: baseline
   description: End Station SDD 2 X-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-DET2:TRX
   onFailure: retry
@@ -283,7 +283,7 @@ es1det2_trx:
 es2ma2_try:
   readoutPriority: baseline
   description: End Station ionization chamber 1+2 Y-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES2-MA2:TRY
   onFailure: retry
@@ -293,7 +293,7 @@ es2ma2_try:
 es2ma2_trz:
   readoutPriority: baseline
   description: End Station ionization chamber 1+2 Z-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES2-MA2:TRZ
   onFailure: retry
@@ -307,7 +307,7 @@ es2ma2_trz:
 es2ma3_try:
   readoutPriority: baseline
   description: End Station XRD detector Y-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES2-MA3:TRY
   onFailure: retry
@@ -386,4 +386,64 @@ es_light_toggle:
     read_pv: "X01DA-EH-LIGHT:TOGGLE"
   onFailure: retry
   enabled: true
+  softwareTrigger: false
+
+es_gas_sensor_o2:
+  readoutPriority: baseline
+  description: ES Gas Sensor O2
+  deviceClass: ophyd.EpicsSignalRO
+  deviceConfig:
+    read_pv: "X01DA-KIMESSA2:EH-O2"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
+
+es_gas_sensor_h2s:
+  readoutPriority: baseline
+  description: ES Gas Sensor H2S
+  deviceClass: ophyd.EpicsSignalRO
+  deviceConfig:
+    read_pv: "X01DA-KIMESSA2:EH-H2S"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
+
+es_gas_sensor_no2:
+  readoutPriority: baseline
+  description: ES Gas Sensor NO2
+  deviceClass: ophyd.EpicsSignalRO
+  deviceConfig:
+    read_pv: "X01DA-KIMESSA2:EH-NO2"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
+
+es_gas_sensor_co:
+  readoutPriority: baseline
+  description: ES Gas Sensor CO
+  deviceClass: ophyd.EpicsSignalRO
+  deviceConfig:
+    read_pv: "X01DA-KIMESSA2:EH-CO"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
+
+es_gas_sensor_h2:
+  readoutPriority: baseline
+  description: ES Gas Sensor H2
+  deviceClass: ophyd.EpicsSignalRO
+  deviceConfig:
+    read_pv: "X01DA-KIMESSA2:EH-H2"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
+
+es_gas_sensor_nh3:
+  readoutPriority: baseline
+  description: ES Gas Sensor NH3
+  deviceClass: ophyd.EpicsSignalRO
+  deviceConfig:
+    read_pv: "X01DA-KIMESSA2:EH-NH3"
+  onFailure: retry
+  enabled: true
   softwareTrigger: false

debye_bec/device_configs/x01da_frontend.yaml

@@ -1,4 +1,18 @@
 
+###################################
+##       Frontend Absorber       ##
+###################################
+
+abs:
+  readoutPriority: baseline
+  description: Frontend Absorber
+  deviceClass: debye_bec.devices.absorber.Absorber
+  deviceConfig:
+    prefix: "X01DA-FE-ABS1:"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
+
 ###################################
 ##        Frontend Slits         ##
 ###################################
@@ -6,7 +20,7 @@
 sldi_trxr:
   readoutPriority: baseline
   description: Front-end slit diaphragm X-translation Ring-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-SLDI:TRXR
   onFailure: retry
@@ -16,7 +30,7 @@ sldi_trxr:
 sldi_trxw:
   readoutPriority: baseline
   description: Front-end slit diaphragm X-translation Wall-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-SLDI:TRXW
   onFailure: retry
@@ -26,7 +40,7 @@ sldi_trxw:
 sldi_tryb:
   readoutPriority: baseline
   description: Front-end slit diaphragm Y-translation Bottom-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-SLDI:TRYB
   onFailure: retry
@@ -36,7 +50,7 @@ sldi_tryb:
 sldi_tryt:
   readoutPriority: baseline
   description: Front-end slit diaphragm X-translation Top-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-SLDI:TRYT
   onFailure: retry
@@ -46,7 +60,7 @@ sldi_tryt:
 sldi_centerx:
   readoutPriority: baseline
   description: Front-end slit diaphragm X-center
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-SLDI:CENTERX
   onFailure: retry
@@ -56,7 +70,7 @@ sldi_centerx:
 sldi_gapx:
   readoutPriority: baseline
   description: Front-end slit diaphragm X-gap
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-SLDI:GAPX
   onFailure: retry
@@ -66,7 +80,7 @@ sldi_gapx:
 sldi_centery:
   readoutPriority: baseline
   description: Front-end slit diaphragm Y-center
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-SLDI:CENTERY
   onFailure: retry
@@ -76,7 +90,7 @@ sldi_centery:
 sldi_gapy:
   readoutPriority: baseline
   description: Front-end slit diaphragm Y-gap
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-SLDI:GAPY
   onFailure: retry
@@ -90,7 +104,7 @@ sldi_gapy:
 cm_trxu:
   readoutPriority: baseline
   description: Collimating Mirror X-translation upstream
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:TRXU
   onFailure: retry
@@ -100,7 +114,7 @@ cm_trxu:
 cm_trxd:
   readoutPriority: baseline
   description: Collimating Mirror X-translation downstream
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:TRXD
   onFailure: retry
@@ -110,7 +124,7 @@ cm_trxd:
 cm_tryu:
   readoutPriority: baseline
   description: Collimating Mirror Y-translation upstream
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:TRYU
   onFailure: retry
@@ -120,7 +134,7 @@ cm_tryu:
 cm_trydr:
   readoutPriority: baseline
   description: Collimating Mirror Y-translation downstream ring
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:TRYDR
   onFailure: retry
@@ -130,7 +144,7 @@ cm_trydr:
 cm_trydw:
   readoutPriority: baseline
   description: Collimating Mirror Y-translation downstream wall
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:TRYDW
   onFailure: retry
@@ -140,17 +154,28 @@ cm_trydw:
 cm_bnd:
   readoutPriority: baseline
   description: Collimating Mirror bender
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:BND
   onFailure: retry
   enabled: true
   softwareTrigger: false
 
+cm_bnd_radius:
+  readoutPriority: baseline
+  description: Collimating Mirror Bending Radius
+  deviceClass: ophyd.EpicsSignalRO
+  deviceConfig:
+    read_pv: X01DA-CPCL-CM:BNDFORCE
+  onFailure: retry
+  readOnly: true
+  enabled: true
+  softwareTrigger: false
+
 cm_rotx:
   readoutPriority: baseline
   description: Collimating Morror Pitch
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:ROTX
   onFailure: retry
@@ -160,7 +185,7 @@ cm_rotx:
 cm_roty:
   readoutPriority: baseline
   description: Collimating Morror Yaw
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:ROTY
   onFailure: retry
@@ -170,7 +195,7 @@ cm_roty:
 cm_rotz:
   readoutPriority: baseline
   description: Collimating Morror Roll
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:ROTZ
   onFailure: retry
@@ -180,7 +205,7 @@ cm_rotz:
 cm_trx:
   readoutPriority: baseline
   description: Collimating Morror Center Point X
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:XTCP
   onFailure: retry
@@ -190,7 +215,7 @@ cm_trx:
 cm_try:
   readoutPriority: baseline
   description: Collimating Morror Center Point Y
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:YTCP
   onFailure: retry
@@ -200,7 +225,7 @@ cm_try:
 cm_ztcp:
   readoutPriority: baseline
   description: Collimating Morror Center Point Z
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:ZTCP
   onFailure: retry
@@ -210,7 +235,7 @@ cm_ztcp:
 cm_xstripe:
   readoutPriority: baseline
   description: Collimating Morror X Stripe
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-FE-CM:XSTRIPE
   onFailure: retry

debye_bec/device_configs/x01da_hutch_cameras.yaml

@@ -0,0 +1,34 @@
+
+###################################
+##         Hutch Cameras         ##
+###################################
+
+hutch_cam_1:
+  readoutPriority: baseline
+  description: Hutch Camera 1
+  deviceClass: debye_bec.devices.cameras.hutch_cam.HutchCam
+  deviceConfig:
+    prefix: "pcp085420"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
+
+hutch_cam_2:
+  readoutPriority: baseline
+  description: Hutch Camera 2
+  deviceClass: debye_bec.devices.cameras.hutch_cam.HutchCam
+  deviceConfig:
+    prefix: "pcp085436"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
+
+hutch_cam_3:
+  readoutPriority: baseline
+  description: Hutch Camera 3
+  deviceClass: debye_bec.devices.cameras.hutch_cam.HutchCam
+  deviceConfig:
+    prefix: "pcp085435"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false

debye_bec/device_configs/x01da_optics.yaml

@@ -3,30 +3,30 @@
 ##         Monochromator         ##
 ###################################
 
-mo_try:
+mo1_try:
   readoutPriority: baseline
   description: Monochromator Y Translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-MO1:TRY
   onFailure: retry
   enabled: true
   softwareTrigger: false
 
-mo_trx:
+mo1_trx:
   readoutPriority: baseline
   description: Monochromator X Translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-MO1:TRX
   onFailure: retry
   enabled: true
   softwareTrigger: false
 
-mo_roty:
+mo1_roty:
   readoutPriority: baseline
   description: Monochromator Yaw
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-MO1:ROTY
   onFailure: retry
@@ -40,7 +40,7 @@ mo_roty:
 sl1_trxr:
   readoutPriority: baseline
   description: Optics slits 1 X-translation Ring-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL1:TRXR
   onFailure: retry
@@ -53,7 +53,7 @@ sl1_trxr:
 sl1_trxw:
   readoutPriority: baseline
   description: Optics slits 1 X-translation Wall-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL1:TRXW
   onFailure: retry
@@ -66,7 +66,7 @@ sl1_trxw:
 sl1_tryb:
   readoutPriority: baseline
   description: Optics slits 1 Y-translation Bottom-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL1:TRYB
   onFailure: retry
@@ -79,7 +79,7 @@ sl1_tryb:
 sl1_tryt:
   readoutPriority: baseline
   description: Optics slits 1 X-translation Top-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL1:TRYT
   onFailure: retry
@@ -92,7 +92,7 @@ sl1_tryt:
 bm1_try:
   readoutPriority: baseline
   description: Beam Monitor 1 Y-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-BM1:TRY
   onFailure: retry
@@ -105,7 +105,7 @@ bm1_try:
 sl1_centerx:
   readoutPriority: baseline
   description: Optics slits 1 X-center
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL1:CENTERX
   onFailure: retry
@@ -118,7 +118,7 @@ sl1_centerx:
 sl1_gapx:
   readoutPriority: baseline
   description: Optics slits 1 X-gap
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL1:GAPX
   onFailure: retry
@@ -131,7 +131,7 @@ sl1_gapx:
 sl1_centery:
   readoutPriority: baseline
   description: Optics slits 1 Y-center
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL1:CENTERY
   onFailure: retry
@@ -144,7 +144,7 @@ sl1_centery:
 sl1_gapy:
   readoutPriority: baseline
   description: Optics slits 1 Y-gap
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL1:GAPY
   onFailure: retry
@@ -161,62 +161,78 @@ sl1_gapy:
 fm_trxu:
   readoutPriority: baseline
   description: Focusing Mirror X-translation upstream
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:TRXU
   onFailure: retry
   enabled: true
   softwareTrigger: false
+
 fm_trxd:
   readoutPriority: baseline
   description: Focusing Mirror X-translation downstream
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:TRXD
   onFailure: retry
   enabled: true
   softwareTrigger: false
+
 fm_tryd:
   readoutPriority: baseline
   description: Focusing Mirror Y-translation downstream
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:TRYD
   onFailure: retry
   enabled: true
   softwareTrigger: false
+
 fm_tryur:
   readoutPriority: baseline
   description: Focusing Mirror Y-translation upstream ring
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:TRYUR
   onFailure: retry
   enabled: true
   softwareTrigger: false
+
 fm_tryuw:
   readoutPriority: baseline
   description: Focusing Mirror Y-translation upstream wall
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:TRYUW
   onFailure: retry
   enabled: true
   softwareTrigger: false
+
 fm_bnd:
   readoutPriority: baseline
   description: Focusing Mirror bender
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:BND
   onFailure: retry
   enabled: true
   softwareTrigger: false
 
+fm_bnd_radius:
+  readoutPriority: baseline
+  description: Focusing Mirror Bending Radius
+  deviceClass: ophyd.EpicsSignalRO
+  deviceConfig:
+    read_pv: X01DA-CPCL-FM:BNDFORCE
+  onFailure: retry
+  readOnly: true
+  enabled: true
+  softwareTrigger: false
+
 fm_rotx:
   readoutPriority: baseline
   description: Focusing Morror Pitch
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:ROTX
   onFailure: retry
@@ -226,7 +242,7 @@ fm_rotx:
 fm_roty:
   readoutPriority: baseline
   description: Focusing Morror Yaw
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:ROTY
   onFailure: retry
@@ -236,27 +252,27 @@ fm_roty:
 fm_rotz:
   readoutPriority: baseline
   description: Focusing Morror Roll
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:ROTZ
   onFailure: retry
   enabled: true
   softwareTrigger: false
 
-fm_xctp:
+fm_trx:
   readoutPriority: baseline
   description: Focusing Morror Center Point X
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:XTCP
   onFailure: retry
   enabled: true
   softwareTrigger: false
 
-fm_ytcp:
+fm_try:
   readoutPriority: baseline
   description: Focusing Morror Center Point Y
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:YTCP
   onFailure: retry
@@ -266,7 +282,7 @@ fm_ytcp:
 fm_ztcp:
   readoutPriority: baseline
   description: Focusing Morror Center Point Z
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-FM:ZTCP
   onFailure: retry
@@ -280,7 +296,7 @@ fm_ztcp:
 sl2_trxr:
   readoutPriority: baseline
   description: Optics slits 2 X-translation Ring-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL2:TRXR
   onFailure: retry
@@ -293,7 +309,7 @@ sl2_trxr:
 sl2_trxw:
   readoutPriority: baseline
   description: Optics slits 2 X-translation Wall-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL2:TRXW
   onFailure: retry
@@ -306,7 +322,7 @@ sl2_trxw:
 sl2_tryb:
   readoutPriority: baseline
   description: Optics slits 2 Y-translation Bottom-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL2:TRYB
   onFailure: retry
@@ -319,7 +335,7 @@ sl2_tryb:
 sl2_tryt:
   readoutPriority: baseline
   description: Optics slits 2 X-translation Top-edge
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL2:TRYT
   onFailure: retry
@@ -332,7 +348,7 @@ sl2_tryt:
 bm2_try:
   readoutPriority: baseline
   description: Beam Monitor 2 Y-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-BM2:TRY
   onFailure: retry
@@ -345,7 +361,7 @@ bm2_try:
 sl2_centerx:
   readoutPriority: baseline
   description: Optics slits 2 X-center
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL2:CENTERX
   onFailure: retry
@@ -358,7 +374,7 @@ sl2_centerx:
 sl2_gapx:
   readoutPriority: baseline
   description: Optics slits 2 X-gap
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL2:GAPX
   onFailure: retry
@@ -371,7 +387,7 @@ sl2_gapx:
 sl2_centery:
   readoutPriority: baseline
   description: Optics slits 2 Y-center
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL2:CENTERY
   onFailure: retry
@@ -384,7 +400,7 @@ sl2_centery:
 sl2_gapy:
   readoutPriority: baseline
   description: Optics slits 2 Y-gap
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-OP-SL2:GAPY
   onFailure: retry

debye_bec/device_configs/x01da_standard_config.yaml

@@ -25,7 +25,7 @@ frontend_config:
 
 ## Bragg Monochromator
 mo1_bragg:
-  readoutPriority: monitored
+  readoutPriority: baseline
   description: Positioner for the Monochromator
   deviceClass: debye_bec.devices.mo1_bragg.mo1_bragg.Mo1Bragg
   deviceConfig:
@@ -34,14 +34,14 @@ mo1_bragg:
   enabled: true
   softwareTrigger: false
 mo1_bragg_angle:
-  readoutPriority: baseline
-  description: Positioner for the Monochromator
-  deviceClass: debye_bec.devices.mo1_bragg.mo1_bragg_angle.Mo1BraggAngle
-  deviceConfig:
-    prefix: "X01DA-OP-MO1:BRAGG:"
-  onFailure: retry
-  enabled: true
-  softwareTrigger: false
+ readoutPriority: baseline
+ description: Positioner for the Monochromator
+ deviceClass: debye_bec.devices.mo1_bragg.mo1_bragg_angle.Mo1BraggAngle
+ deviceConfig:
+   prefix: "X01DA-OP-MO1:BRAGG:"
+ onFailure: retry
+ enabled: true
+ softwareTrigger: false
 
 ## Remaining optics hutch
 optics_config:
@@ -51,7 +51,7 @@ optics_config:
 ##      Experimental Hutch       ##
 ###################################
 
-## NIDAQ
+# ## NIDAQ
 nidaq:
   readoutPriority: monitored
   description: NIDAQ backend for data reading for debye scans
@@ -67,8 +67,13 @@ xas_config:
   - !include ./x01da_xas.yaml
 
 ## XRD (Pilatus, pinhole, beamstop)
-xrd_config:
-  - !include ./x01da_xrd.yaml
+#xrd_config:
+#  - !include ./x01da_xrd.yaml
+
+# Commented out because too slow
+## Hutch cameras
+# hutch_cams:
+#   - !include ./x01da_hutch_cameras.yaml
 
 ## Remaining experimental hutch
 es_config:

debye_bec/device_configs/x01da_xas.yaml

@@ -3,35 +3,45 @@
 ##     Ionization Chambers       ##
 ###################################
 
-# ic0:
-#   readoutPriority: baseline
-#   description: Ionization chamber 0
-#   deviceClass: debye_bec.devices.ionization_chambers.ionization_chamber.IonizationChamber0
-#   deviceConfig:
-#     prefix: "X01DA-"
-#   onFailure: retry
-#   enabled: true
-#   softwareTrigger: false
+ic0:
+  readoutPriority: baseline
+  description: Ionization chamber 0
+  deviceClass: debye_bec.devices.ionization_chambers.ionization_chamber.IonizationChamber0
+  deviceConfig:
+    prefix: "X01DA-"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
 
-# ic1:
-#   readoutPriority: baseline
-#   description: Ionization chamber 1
-#   deviceClass: debye_bec.devices.ionization_chambers.ionization_chamber.IonizationChamber1
-#   deviceConfig:
-#     prefix: "X01DA-"
-#   onFailure: retry
-#   enabled: true
-#   softwareTrigger: false
+ic1:
+  readoutPriority: baseline
+  description: Ionization chamber 1
+  deviceClass: debye_bec.devices.ionization_chambers.ionization_chamber.IonizationChamber1
+  deviceConfig:
+    prefix: "X01DA-"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
 
-# ic2:
-#   readoutPriority: baseline
-#   description: Ionization chamber 2
-#   deviceClass: debye_bec.devices.ionization_chambers.ionization_chamber.IonizationChamber2
-#   deviceConfig:
-#     prefix: "X01DA-"
-#   onFailure: retry
-#   enabled: true
-#   softwareTrigger: false
+ic2:
+  readoutPriority: baseline
+  description: Ionization chamber 2
+  deviceClass: debye_bec.devices.ionization_chambers.ionization_chamber.IonizationChamber2
+  deviceConfig:
+    prefix: "X01DA-"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
+
+pips:
+  readoutPriority: baseline
+  description: Pips diode
+  deviceClass: debye_bec.devices.ionization_chambers.ionization_chamber.Pips
+  deviceConfig:
+    prefix: "X01DA-"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false
 
 ###################################
 ##    Reference Foil Changer     ##

debye_bec/device_configs/x01da_xrd.yaml

@@ -6,7 +6,7 @@
 pin1_trx:
   readoutPriority: baseline
   description: Pinhole X-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-PIN1:TRX
   onFailure: retry
@@ -17,7 +17,7 @@ pin1_trx:
 pin1_try:
   readoutPriority: baseline
   description: Pinhole Y-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-PIN1:TRY
   onFailure: retry
@@ -28,7 +28,7 @@ pin1_try:
 pin1_rotx:
   readoutPriority: baseline
   description: Pinhole X-rotation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-PIN1:ROTX
   onFailure: retry
@@ -39,7 +39,7 @@ pin1_rotx:
 pin1_roty:
   readoutPriority: baseline
   description: Pinhole Y-rotation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES1-PIN1:ROTY
   onFailure: retry
@@ -54,7 +54,7 @@ pin1_roty:
 es2bs_trx:
   readoutPriority: baseline
   description: End Station beamstop X-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES2-BS:TRX
   onFailure: retry
@@ -64,7 +64,7 @@ es2bs_trx:
 es2bs_try:
   readoutPriority: baseline
   description: End Station beamstop Y-translation
-  deviceClass: ophyd.EpicsMotor
+  deviceClass: ophyd_devices.EpicsMotorEC
   deviceConfig:
     prefix: X01DA-ES2-BS:TRY
   onFailure: retry
@@ -86,7 +86,7 @@ pilatus_curtain:
   softwareTrigger: false
 
 pilatus:
-  readoutPriority: async
+  readoutPriority: baseline
   description: Pilatus
   deviceClass: debye_bec.devices.pilatus.pilatus.Pilatus
   deviceTags:
@@ -97,12 +97,12 @@ pilatus:
   enabled: true
   softwareTrigger: true
 
-# sampl_pil:
-#   readoutPriority: baseline
-#   description: Sample to pilatus distance
-#   deviceClass: ophyd.EpicsSignalRO
-#   deviceConfig:
-#     read_pv: "X01DA-SAMPL-PIL"
-#   onFailure: retry
-#   enabled: true
-#   softwareTrigger: false
+pilatus_smpl:
+  readoutPriority: baseline
+  description: Sample to pilatus distance
+  deviceClass: ophyd.EpicsSignalRO
+  deviceConfig:
+    read_pv: "X01DA-ES2-DET:SMPLDIST"
+  onFailure: retry
+  enabled: true
+  softwareTrigger: false

debye_bec/devices/absorber.py

@@ -0,0 +1,72 @@
+"""Frontend Absorber"""
+
+from __future__ import annotations
+
+import enum
+from typing import TYPE_CHECKING
+
+from ophyd import Component as Cpt
+from ophyd import EpicsSignal, EpicsSignalRO
+from ophyd_devices import CompareStatus, DeviceStatus
+from ophyd_devices.interfaces.base_classes.psi_device_base import PSIDeviceBase
+
+if TYPE_CHECKING:
+    from bec_lib.devicemanager import ScanInfo
+
+class AbsorberError(Exception):
+    """Absorber specific exception"""
+
+class STATUS(int, enum.Enum):
+    """Absorber States"""
+
+    MOVING_CLOSE = 0
+    OPEN = 1
+    MOVING_OPEN = 2
+    CLOSED = 3
+    NOT_ENABLED = 4
+    TIMEOUT_CLOSE = 5
+    TIMEOUT_OPEN = 6
+    CLOSE_LS_LOST = 7
+    OPEN_LS_LOST = 8
+    CLOSE_LS_NOT_FREE = 9
+    OPEN_LS_NOT_FREE = 10
+    ERROR_LS = 11
+    TO_CONNECT = 12
+    MAN_OPEN = 13
+    UNDEFINED = 14
+
+class Absorber(PSIDeviceBase):
+    """Class for the Frontend Absorber"""
+
+    USER_ACCESS = ["open", "close"]
+
+    request = Cpt(EpicsSignal, suffix="REQUEST", kind="config", doc="Open/Close Absorber")
+    status = Cpt(EpicsSignalRO, suffix="STATUS", kind="normal", doc="Absorber Status")
+    status_string = Cpt(EpicsSignalRO, suffix="STATUS", kind="normal", string=True, doc="Absorber Status")
+
+    def __init__(self, *, name: str, prefix: str = "", scan_info: ScanInfo | None = None, **kwargs):
+        super().__init__(name=name, prefix=prefix, scan_info=scan_info, **kwargs)
+
+        self.timeout_for_move = 10
+        # Wait for connection on all components, ensure IOC is connected
+        self.wait_for_connection(all_signals=True, timeout=5)
+
+    def open(self) -> DeviceStatus | None:
+        """Open the Absorber"""
+        if self.status.get() == STATUS.CLOSED:
+            self.request.put(1)
+            status_open = CompareStatus(self.status, STATUS.OPEN, timeout=self.timeout_for_move)
+            status = status_open
+            return status
+        else:
+            return None
+
+    def close(self) -> DeviceStatus | None:
+        """Close the Absorber"""
+        if self.status.get() == STATUS.OPEN:
+            self.request.put(1)
+            status_close = CompareStatus(self.status, STATUS.CLOSED, timeout=self.timeout_for_move)
+            status = status_close
+            return status
+        else:
+            return None

debye_bec/devices/cameras/basler_cam.py

@@ -4,7 +4,7 @@ from __future__ import annotations
 
 from typing import TYPE_CHECKING
 
-from ophyd import ADBase
+from ophyd import ADBase, EpicsSignalRO
 from ophyd import ADComponent as ADCpt
 from ophyd import Component as Cpt
 from ophyd_devices import PreviewSignal
@@ -20,6 +20,16 @@ if TYPE_CHECKING:  # pragma: no cover
 class BaslerCamBase(ADBase):
     """BaslerCam Base class."""
 
+    cam_detector_state_string = Cpt(EpicsSignalRO, suffix="cam1:DetectorState_RBV", string=True)
+
+    _default_configuration_attrs = [
+        'cam1.acquire_time',
+        'cam1.detector_state',
+        'cam_detector_state_string',
+        'cam1.gain',
+        'cam1.model',
+    ]
+
     cam1 = ADCpt(AravisDetectorCam, "cam1:")
     image1 = ADCpt(ImagePlugin_V35, "image1:")
 

debye_bec/devices/cameras/hutch_cam.py

@@ -0,0 +1,79 @@
+"""EH Hutch Cameras"""
+
+from __future__ import annotations
+
+import cv2
+import threading
+from typing import TYPE_CHECKING
+
+from bec_lib.logger import bec_logger
+from bec_lib.file_utils import get_full_path
+from ophyd_devices.interfaces.base_classes.psi_device_base import PSIDeviceBase
+from ophyd_devices import DeviceStatus
+
+if TYPE_CHECKING:  # pragma: no cover
+    from bec_lib.devicemanager import ScanInfo
+    from bec_lib.messages import ScanStatusMessage
+
+logger = bec_logger.logger
+
+CAM_USERNAME = "camera_user"
+CAM_PASSWORD = "camera_user1"
+CAM_PORT = 554
+
+class HutchCam(PSIDeviceBase):
+    """Class for the Hutch Cameras"""
+
+    # image = Cpt(Signal, name='image', kind='config')
+
+    def __init__(self, *, name: str, prefix: str = "", scan_info: ScanInfo | None = None, **kwargs):
+        super().__init__(name=name, scan_info=scan_info, **kwargs)
+
+        self.hostname = prefix
+        self.status = None
+
+    # pylint: disable=E1101
+    def on_connected(self) -> None:
+        """
+        Called after the device is connected and its signals are connected.
+        Default values for signals should be set here.
+        """
+        rtsp_url = f"rtsp://{CAM_USERNAME}:{CAM_PASSWORD}@{self.hostname}.psi.ch:{CAM_PORT}/rtpstream/config1"
+        cap = cv2.VideoCapture(f"{rtsp_url}?tcp")
+        if not cap.isOpened():
+            logger.error(self, "Connection Failed", "Could not connect to the camera stream.")
+            return
+        cap.release()
+
+    def on_stage(self) -> DeviceStatus:
+        """Called while staging the device."""
+
+        scan_msg: ScanStatusMessage = self.scan_info.msg
+        file_path = get_full_path(scan_msg, name='hutch_cam_' + self.hostname).removesuffix('h5')
+
+        self.status = DeviceStatus(self)
+
+        thread = threading.Thread(target=self._save_picture, args=(file_path, self.status), daemon=True)
+        thread.start()
+
+        return self.status
+
+    def _save_picture(self, file_path, status):
+        try:
+            logger.info(f'Capture from camera {self.hostname}')
+            rtsp_url = f"rtsp://{CAM_USERNAME}:{CAM_PASSWORD}@{self.hostname}.psi.ch:{CAM_PORT}/rtpstream/config1"
+            cap = cv2.VideoCapture(f"{rtsp_url}?tcp")
+            if not cap.isOpened():
+                logger.error("Connection Failed", "Could not connect to the camera stream.")
+                return
+            logger.info(f'Connection to camera {self.hostname} established')
+            ret, frame = cap.readAsync()
+            cap.release()
+            if not ret:
+                logger.error("Capture Failed", "Failed to capture image from camera.")
+                return
+            cv2.imwrite(file_path + 'png', frame)
+            status.set_finished()
+            logger.info(f'Capture from camera {self.hostname} done')
+        except Exception as e:
+            status.set_exception(e)

debye_bec/devices/cameras/prosilica_cam.py

@@ -4,7 +4,7 @@ from __future__ import annotations
 
 from typing import TYPE_CHECKING
 
-from ophyd import ADBase
+from ophyd import ADBase, EpicsSignalRO
 from ophyd import ADComponent as ADCpt
 from ophyd import Component as Cpt
 from ophyd_devices import PreviewSignal
@@ -20,6 +20,16 @@ if TYPE_CHECKING:  # pragma: no cover
 class ProsilicaCamBase(ADBase):
     """Base class for Prosilica cameras."""
 
+    cam_detector_state_string = Cpt(EpicsSignalRO, suffix="cam1:DetectorState_RBV", string=True)
+
+    _default_configuration_attrs = [
+        'cam1.acquire_time',
+        'cam1.detector_state',
+        'cam_detector_state_string',
+        'cam1.gain',
+        'cam1.model',
+    ]
+
     cam1 = ADCpt(ProsilicaDetectorCam, "cam1:")
     image1 = ADCpt(ImagePlugin_V35, "image1:")
 

debye_bec/devices/ionization_chambers/ionization_chamber.py

@@ -33,22 +33,24 @@ class EpicsSignalSplit(EpicsSignal):
 class GasMixSetupControl(Device):
     """GasMixSetup Control for Inonization Chamber 0"""
 
-    gas1_req = Cpt(EpicsSignalWithRBV, suffix="Gas1Req", kind="config", doc="Gas 1 requirement")
+    gas1_req = Cpt(EpicsSignalWithRBV, suffix="Gas1Req", kind="omitted", doc="Gas 1 requirement")
     conc1_req = Cpt(
-        EpicsSignalWithRBV, suffix="Conc1Req", kind="config", doc="Concentration 1 requirement"
+        EpicsSignalWithRBV, suffix="Conc1Req", kind="omitted", doc="Concentration 1 requirement"
     )
-    gas2_req = Cpt(EpicsSignalWithRBV, suffix="Gas2Req", kind="config", doc="Gas 2 requirement")
+    gas2_req = Cpt(EpicsSignalWithRBV, suffix="Gas2Req", kind="omitted", doc="Gas 2 requirement")
     conc2_req = Cpt(
-        EpicsSignalWithRBV, suffix="Conc2Req", kind="config", doc="Concentration 2 requirement"
+        EpicsSignalWithRBV, suffix="Conc2Req", kind="omitted", doc="Concentration 2 requirement"
     )
     press_req = Cpt(
-        EpicsSignalWithRBV, suffix="PressReq", kind="config", doc="Pressure requirement"
+        EpicsSignalWithRBV, suffix="PressReq", kind="omitted", doc="Pressure requirement"
     )
     fill = Cpt(EpicsSignal, suffix="Fill", kind="config", doc="Fill the chamber")
     status = Cpt(EpicsSignalRO, suffix="Status", kind="config", doc="Status")
     gas1 = Cpt(EpicsSignalRO, suffix="Gas1", kind="config", doc="Gas 1")
+    gas1_string = Cpt(EpicsSignalRO, suffix="Gas1", kind="config", doc="Gas 1", string=True)
     conc1 = Cpt(EpicsSignalRO, suffix="Conc1", kind="config", doc="Concentration 1")
     gas2 = Cpt(EpicsSignalRO, suffix="Gas2", kind="config", doc="Gas 2")
+    gas2_string = Cpt(EpicsSignalRO, suffix="Gas2", kind="config", doc="Gas 2", string=True)
     conc2 = Cpt(EpicsSignalRO, suffix="Conc2", kind="config", doc="Concentration 2")
     press = Cpt(EpicsSignalRO, suffix="PressTransm", kind="config", doc="Current Pressure")
 
@@ -84,10 +86,25 @@ class IonizationChamber0(PSIDeviceBase):
             (f"ES:AMP5004:cFilter{num}_ENUM"),
             {"kind": "config", "doc": f"Filter of ch{num} -> IC{num-1}"},
         ),
+        "cOnOff_string": (
+            EpicsSignal,
+            (f"ES:AMP5004.cOnOff{num}"),
+            {"kind": "config", "doc": f"Enable ch{num} -> IC{num-1}", "string": True},
+        ),
+        "cGain_ENUM_string": (
+            EpicsSignalWithRBV,
+            (f"ES:AMP5004:cGain{num}_ENUM"),
+            {"kind": "config", "doc": f"Gain of ch{num} -> IC{num-1}", "string": True},
+        ),
+        "cFilter_ENUM_string": (
+            EpicsSignalWithRBV,
+            (f"ES:AMP5004:cFilter{num}_ENUM"),
+            {"kind": "config", "doc": f"Filter of ch{num} -> IC{num-1}", "string": True},
+        ),
     }
     amp = Dcpt(amp_signals)
     gmes = Cpt(GasMixSetupControl, suffix=f"ES-GMES:IC{num-1}")
-    gmes_status = Cpt(EpicsSignalRO, suffix="ES-GMES:StatusMsg0", kind="config", doc="Status")
+    gmes_status_msg = Cpt(EpicsSignalRO, suffix="ES-GMES:StatusMsg0", kind="config", doc="Status")
     hv = Cpt(HighVoltageSuppliesControl, suffix=f"ES1-IC{num-1}:")
     hv_en_signals = {
         "ext_ena": (
@@ -275,10 +292,25 @@ class IonizationChamber1(IonizationChamber0):
             (f"ES:AMP5004:cFilter{num}_ENUM"),
             {"kind": "config", "doc": f"Filter of ch{num} -> IC{num-1}"},
         ),
+        "cOnOff_string": (
+            EpicsSignal,
+            (f"ES:AMP5004.cOnOff{num}"),
+            {"kind": "config", "doc": f"Enable ch{num} -> IC{num-1}", "string": True},
+        ),
+        "cGain_ENUM_string": (
+            EpicsSignalWithRBV,
+            (f"ES:AMP5004:cGain{num}_ENUM"),
+            {"kind": "config", "doc": f"Gain of ch{num} -> IC{num-1}", "string": True},
+        ),
+        "cFilter_ENUM_string": (
+            EpicsSignalWithRBV,
+            (f"ES:AMP5004:cFilter{num}_ENUM"),
+            {"kind": "config", "doc": f"Filter of ch{num} -> IC{num-1}", "string": True},
+        ),
     }
     amp = Dcpt(amp_signals)
     gmes = Cpt(GasMixSetupControl, suffix=f"ES-GMES:IC{num-1}")
-    gmes_status = Cpt(EpicsSignalRO, suffix="ES-GMES:StatusMsg0", kind="config", doc="Status")
+    gmes_status_msg = Cpt(EpicsSignalRO, suffix="ES-GMES:StatusMsg0", kind="config", doc="Status")
     hv = Cpt(HighVoltageSuppliesControl, suffix=f"ES2-IC{num-1}:")
     hv_en_signals = {
         "ext_ena": (
@@ -311,10 +343,25 @@ class IonizationChamber2(IonizationChamber0):
             (f"ES:AMP5004:cFilter{num}_ENUM"),
             {"kind": "config", "doc": f"Filter of ch{num} -> IC{num-1}"},
         ),
+        "cOnOff_string": (
+            EpicsSignal,
+            (f"ES:AMP5004.cOnOff{num}"),
+            {"kind": "config", "doc": f"Enable ch{num} -> IC{num-1}", "string": True},
+        ),
+        "cGain_ENUM_string": (
+            EpicsSignalWithRBV,
+            (f"ES:AMP5004:cGain{num}_ENUM"),
+            {"kind": "config", "doc": f"Gain of ch{num} -> IC{num-1}", "string": True},
+        ),
+        "cFilter_ENUM_string": (
+            EpicsSignalWithRBV,
+            (f"ES:AMP5004:cFilter{num}_ENUM"),
+            {"kind": "config", "doc": f"Filter of ch{num} -> IC{num-1}", "string": True},
+        ),
     }
     amp = Dcpt(amp_signals)
     gmes = Cpt(GasMixSetupControl, suffix=f"ES-GMES:IC{num-1}")
-    gmes_status = Cpt(EpicsSignalRO, suffix="ES-GMES:StatusMsg0", kind="config", doc="Status")
+    gmes_status_msg = Cpt(EpicsSignalRO, suffix="ES-GMES:StatusMsg0", kind="config", doc="Status")
     hv = Cpt(HighVoltageSuppliesControl, suffix=f"ES2-IC{num-1}:")
     hv_en_signals = {
         "ext_ena": (
@@ -325,3 +372,63 @@ class IonizationChamber2(IonizationChamber0):
         "ena": (EpicsSignal, "ES2-IC12:HV-Ena", {"kind": "config", "doc": "Enable signal of HV"}),
     }
     hv_en = Dcpt(hv_en_signals)
+
+class Pips(IonizationChamber0):
+    """Pips, prefix should be 'X01DA-'."""
+
+    USER_ACCESS = ["set_gain", "set_filter"]
+
+    num = 4
+    amp_signals = {
+        "cOnOff": (
+            EpicsSignal,
+            (f"ES:AMP5004.cOnOff{num}"),
+            {"kind": "config", "doc": f"Enable ch{num} -> IC{num-1}"},
+        ),
+        "cGain_ENUM": (
+            EpicsSignalWithRBV,
+            (f"ES:AMP5004:cGain{num}_ENUM"),
+            {"kind": "config", "doc": f"Gain of ch{num} -> IC{num-1}"},
+        ),
+        "cFilter_ENUM": (
+            EpicsSignalWithRBV,
+            (f"ES:AMP5004:cFilter{num}_ENUM"),
+            {"kind": "config", "doc": f"Filter of ch{num} -> IC{num-1}"},
+        ),
+        "cOnOff_string": (
+            EpicsSignal,
+            (f"ES:AMP5004.cOnOff{num}"),
+            {"kind": "config", "doc": f"Enable ch{num} -> IC{num-1}", "string": True},
+        ),
+        "cGain_ENUM_string": (
+            EpicsSignalWithRBV,
+            (f"ES:AMP5004:cGain{num}_ENUM"),
+            {"kind": "config", "doc": f"Gain of ch{num} -> IC{num-1}", "string": True},
+        ),
+        "cFilter_ENUM_string": (
+            EpicsSignalWithRBV,
+            (f"ES:AMP5004:cFilter{num}_ENUM"),
+            {"kind": "config", "doc": f"Filter of ch{num} -> IC{num-1}", "string": True},
+        ),
+    }
+    amp = Dcpt(amp_signals)
+    gmes = None
+    gmes_status_msg = None
+    hv = None
+    hv_en_signals = None
+    hv_en = None
+
+    @typechecked
+    def set_hv(self, *_) -> None:
+        """Not available for the PIPS"""
+        return None
+
+    @typechecked
+    def set_grid(self, *_) -> None:
+        """Not available for the PIPS"""
+        return None
+
+    @typechecked
+    def fill(self, *_) -> None:
+        """Not available for the PIPS"""
+        return None

debye_bec/devices/mo1_bragg/mo1_bragg_devices.py

@@ -76,8 +76,14 @@ class Mo1BraggEncoder(Device):
 class Mo1BraggCrystal(Device):
     """Mo1 Bragg PVs to set the crystal parameters"""
 
-    offset_si111 = Cpt(EpicsSignalWithRBV, suffix="offset_si111", kind="config")
-    offset_si311 = Cpt(EpicsSignalWithRBV, suffix="offset_si311", kind="config")
+    bragg_off_si111 = Cpt(EpicsSignalWithRBV, suffix="bragg_off_si111", kind="config")
+    bragg_off_si311 = Cpt(EpicsSignalWithRBV, suffix="bragg_off_si311", kind="config")
+    phi_off_si111 = Cpt(EpicsSignalWithRBV, suffix="phi_off_si111", kind="config")
+    phi_off_si311 = Cpt(EpicsSignalWithRBV, suffix="phi_off_si311", kind="config")
+    azm_off_si111 = Cpt(EpicsSignalWithRBV, suffix="azm_off_si111", kind="config")
+    azm_off_si311 = Cpt(EpicsSignalWithRBV, suffix="azm_off_si311", kind="config")
+    miscut_si111 = Cpt(EpicsSignalWithRBV, suffix="miscut_si111", kind="config")
+    miscut_si311 = Cpt(EpicsSignalWithRBV, suffix="miscut_si311", kind="config")
     xtal_enum = Cpt(EpicsSignalWithRBV, suffix="xtal_ENUM", kind="config")
     d_spacing_si111 = Cpt(EpicsSignalWithRBV, suffix="d_spacing_si111", kind="config")
     d_spacing_si311 = Cpt(EpicsSignalWithRBV, suffix="d_spacing_si311", kind="config")
@@ -85,13 +91,21 @@ class Mo1BraggCrystal(Device):
     current_d_spacing = Cpt(
         EpicsSignalRO, suffix="current_d_spacing_RBV", kind="normal", auto_monitor=True
     )
-    current_offset = Cpt(
-        EpicsSignalRO, suffix="current_offset_RBV", kind="normal", auto_monitor=True
+    current_bragg_off = Cpt(
+        EpicsSignalRO, suffix="current_bragg_off_RBV", kind="normal", auto_monitor=True
+    )
+    current_phi_off = Cpt(
+        EpicsSignalRO, suffix="current_phi_off_RBV", kind="normal", auto_monitor=True
+    )
+    current_azm_off = Cpt(
+        EpicsSignalRO, suffix="current_azm_off_RBV", kind="normal", auto_monitor=True
+    )
+    current_miscut = Cpt(
+        EpicsSignalRO, suffix="current_miscut_RBV", kind="normal", auto_monitor=True
     )
     current_xtal = Cpt(
         EpicsSignalRO, suffix="current_xtal_ENUM_RBV", kind="normal", auto_monitor=True
     )
-
     current_xtal_string = Cpt(
         EpicsSignalRO, suffix="current_xtal_ENUM_RBV", kind="normal", auto_monitor=True, string=True
     )
@@ -240,6 +254,8 @@ class Mo1BraggPositioner(Device, PositionerBase):
     high_lim = Cpt(EpicsSignalRO, suffix="hi_lim_pos_energy_RBV", kind="config", auto_monitor=True)
     velocity = Cpt(EpicsSignalWithRBV, suffix="move_velocity", kind="config", auto_monitor=True)
 
+    angle = Cpt(EpicsSignalRO, suffix="feedback_pos_angle_RBV", kind="normal", auto_monitor=True)
+
     ########## Move Command PVs   ##########
 
     move_abs = Cpt(EpicsSignal, suffix="move_abs", kind="config", put_complete=True)
@@ -392,8 +408,8 @@ class Mo1BraggPositioner(Device, PositionerBase):
     def set_xtal(
         self,
         xtal_enum: Literal["111", "311"],
-        offset_si111: float = None,
-        offset_si311: float = None,
+        bragg_off_si111: float = None,
+        bragg_off_si311: float = None,
         d_spacing_si111: float = None,
         d_spacing_si311: float = None,
     ) -> None:
@@ -401,15 +417,15 @@ class Mo1BraggPositioner(Device, PositionerBase):
 
         Args:
             xtal_enum (Literal["111", "311"]) : Enum to set the crystal orientation
-            offset_si111 (float) : Offset for the 111 crystal
-            offset_si311 (float) : Offset for the 311 crystal
+            bragg_off_si111 (float) : Offset for the 111 crystal
+            bragg_off_si311 (float) : Offset for the 311 crystal
             d_spacing_si111 (float) : d-spacing for the 111 crystal
             d_spacing_si311 (float) : d-spacing for the 311 crystal
         """
-        if offset_si111 is not None:
-            self.crystal.offset_si111.put(offset_si111)
-        if offset_si311 is not None:
-            self.crystal.offset_si311.put(offset_si311)
+        if bragg_off_si111 is not None:
+            self.crystal.bragg_off_si111.put(bragg_off_si111)
+        if bragg_off_si311 is not None:
+            self.crystal.bragg_off_si311.put(bragg_off_si311)
         if d_spacing_si111 is not None:
             self.crystal.d_spacing_si111.put(d_spacing_si111)
         if d_spacing_si311 is not None:

debye_bec/devices/nidaq/nidaq.py

@@ -33,6 +33,107 @@ class NidaqControl(Device):
     """Nidaq control class with all PVs"""
 
     ### Readback PVs for EpicsEmitter ###
+    energy = Cpt(SetableSignal, value=0, kind=Kind.normal)
+
+    smpl_abs = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream sample absorption"
+    )
+    smpl_fluo = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream sample fluorescence"
+    )
+    ref_abs = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream reference absorption"
+    )
+    cisum = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter sum"
+    )
+
+    ai0_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 0, MEAN"
+    )
+    ai1_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 1, MEAN"
+    )
+    ai2_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 2, MEAN"
+    )
+    ai3_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 3, MEAN"
+    )
+    ai4_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 4, MEAN"
+    )
+    ai5_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 5, MEAN"
+    )
+    ai6_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 6, MEAN"
+    )
+    ai7_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 7, MEAN"
+    )
+
+    di0_max = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream digital input 0, MAX")
+    di1_max = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream digital input 1, MAX")
+    di2_max = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream digital input 2, MAX")
+    di3_max = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream digital input 3, MAX")
+    di4_max = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream digital input 4, MAX")
+
+    ci0_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 0, MEAN"
+    )
+    ci1_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 1, MEAN"
+    )
+    ci2_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 2, MEAN"
+    )
+    ci3_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 3, MEAN"
+    )
+    ci4_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 4, MEAN"
+    )
+    ci5_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 5, MEAN"
+    )
+    ci6_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 6, MEAN"
+    )
+    ci7_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 7, MEAN"
+    )
+    ci8_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 8, MEAN"
+    )
+    ci9_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 9, MEAN"
+    )
+    ci10_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 10, MEAN"
+    )
+    ci11_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 11, MEAN"
+    )
+    ci12_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 12, MEAN"
+    )
+    ci13_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 13, MEAN"
+    )
+    ci14_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 14, MEAN"
+    )
+    ci15_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 15, MEAN"
+    )
+    ci16_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 16, MEAN"
+    )
+    ci17_mean = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 17, MEAN"
+    )
+
     ai0 = Cpt(
         EpicsSignalRO,
         suffix="NIDAQ-AI0",
@@ -146,6 +247,76 @@ class NidaqControl(Device):
         doc="EPICS counter input 7",
         auto_monitor=True,
     )
+    ci8 = Cpt(
+        EpicsSignalRO,
+        suffix="NIDAQ-CI8",
+        kind=Kind.normal,
+        doc="EPICS counter input 8",
+        auto_monitor=True,
+    )
+    ci9 = Cpt(
+        EpicsSignalRO,
+        suffix="NIDAQ-CI9",
+        kind=Kind.normal,
+        doc="EPICS counter input 9",
+        auto_monitor=True,
+    )
+    ci10 = Cpt(
+        EpicsSignalRO,
+        suffix="NIDAQ-CI10",
+        kind=Kind.normal,
+        doc="EPICS counter input 0",
+        auto_monitor=True,
+    )
+    ci11 = Cpt(
+        EpicsSignalRO,
+        suffix="NIDAQ-CI11",
+        kind=Kind.normal,
+        doc="EPICS counter input 1",
+        auto_monitor=True,
+    )
+    ci12 = Cpt(
+        EpicsSignalRO,
+        suffix="NIDAQ-CI12",
+        kind=Kind.normal,
+        doc="EPICS counter input 2",
+        auto_monitor=True,
+    )
+    ci13 = Cpt(
+        EpicsSignalRO,
+        suffix="NIDAQ-CI13",
+        kind=Kind.normal,
+        doc="EPICS counter input 3",
+        auto_monitor=True,
+    )
+    ci14 = Cpt(
+        EpicsSignalRO,
+        suffix="NIDAQ-CI14",
+        kind=Kind.normal,
+        doc="EPICS counter input 4",
+        auto_monitor=True,
+    )
+    ci15 = Cpt(
+        EpicsSignalRO,
+        suffix="NIDAQ-CI15",
+        kind=Kind.normal,
+        doc="EPICS counter input 5",
+        auto_monitor=True,
+    )
+    ci16 = Cpt(
+        EpicsSignalRO,
+        suffix="NIDAQ-CI16",
+        kind=Kind.normal,
+        doc="EPICS counter input 6",
+        auto_monitor=True,
+    )
+    ci17 = Cpt(
+        EpicsSignalRO,
+        suffix="NIDAQ-CI17",
+        kind=Kind.normal,
+        doc="EPICS counter input 7",
+        auto_monitor=True,
+    )
 
     di0 = Cpt(
         EpicsSignalRO,
@@ -200,32 +371,6 @@ class NidaqControl(Device):
     )
 
     ### Readback for BEC emitter ###
-
-    ai0_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 0, MEAN"
-    )
-    ai1_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 1, MEAN"
-    )
-    ai2_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 2, MEAN"
-    )
-    ai3_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 3, MEAN"
-    )
-    ai4_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 4, MEAN"
-    )
-    ai5_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 5, MEAN"
-    )
-    ai6_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 6, MEAN"
-    )
-    ai7_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 7, MEAN"
-    )
-
     ai0_std_dev = Cpt(
         SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 0, STD"
     )
@@ -251,31 +396,6 @@ class NidaqControl(Device):
         SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream analog input 7, STD"
     )
 
-    ci0_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 0, MEAN"
-    )
-    ci1_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 1, MEAN"
-    )
-    ci2_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 2, MEAN"
-    )
-    ci3_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 3, MEAN"
-    )
-    ci4_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 4, MEAN"
-    )
-    ci5_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 5, MEAN"
-    )
-    ci6_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 6, MEAN"
-    )
-    ci7_mean = Cpt(
-        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 7, MEAN"
-    )
-
     ci0_std_dev = Cpt(
         SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 0. STD"
     )
@@ -300,44 +420,95 @@ class NidaqControl(Device):
     ci7_std_dev = Cpt(
         SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 7. STD"
     )
+    ci8_std_dev = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 8. STD"
+    )
+    ci9_std_dev = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 9. STD"
+    )
+    ci10_std_dev = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 10. STD"
+    )
+    ci11_std_dev = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 11. STD"
+    )
+    ci12_std_dev = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 12. STD"
+    )
+    ci13_std_dev = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 13. STD"
+    )
+    ci14_std_dev = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 14. STD"
+    )
+    ci15_std_dev = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 15. STD"
+    )
+    ci16_std_dev = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 16. STD"
+    )
+    ci17_std_dev = Cpt(
+        SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream counter input 17. STD"
+    )
 
     xas_timestamp = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream XAS timestamp")
-
     xrd_timestamp = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream XRD timestamp")
-
+    xrd_angle = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream XRD angle")
     xrd_energy = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream XRD energy")
-
-    di0_max = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream digital input 0, MAX")
-    di1_max = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream digital input 1, MAX")
-    di2_max = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream digital input 2, MAX")
-    di3_max = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream digital input 3, MAX")
-    di4_max = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream digital input 4, MAX")
+    xrd_ai0_mean = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream XRD ai0 mean")
+    xrd_ai0_std_dev = Cpt(SetableSignal, value=0, kind=Kind.normal, doc="NIDAQ stream XRD ai0 std dev")
 
     enc = Cpt(SetableSignal, value=0, kind=Kind.normal)
-    energy = Cpt(SetableSignal, value=0, kind=Kind.normal)
     rle = Cpt(SetableSignal, value=0, kind=Kind.normal)
 
     ### Control PVs ###
 
-    enable_compression = Cpt(EpicsSignal, suffix="NIDAQ-EnableRLE", kind=Kind.config)
+    enable_compression = Cpt(EpicsSignal, suffix="NIDAQ-EnableRLE", kind=Kind.config, auto_monitor=True)
+    enable_dead_time_correction = Cpt(EpicsSignal, suffix="NIDAQ-EnableDTC", kind=Kind.config, auto_monitor=True)
     kickoff_call = Cpt(EpicsSignal, suffix="NIDAQ-Kickoff", kind=Kind.config)
     stage_call = Cpt(EpicsSignal, suffix="NIDAQ-Stage", kind=Kind.config)
     state = Cpt(EpicsSignal, suffix="NIDAQ-FSMState", kind=Kind.config, auto_monitor=True)
     server_status = Cpt(EpicsSignalRO, suffix="NIDAQ-ServerStatus", kind=Kind.config)
     compression_ratio = Cpt(EpicsSignalRO, suffix="NIDAQ-CompressionRatio", kind=Kind.config)
     scan_type = Cpt(EpicsSignal, suffix="NIDAQ-ScanType", kind=Kind.config)
-    sampling_rate = Cpt(EpicsSignal, suffix="NIDAQ-SamplingRateRequested", kind=Kind.config)
+    scan_type_string = Cpt(EpicsSignal, suffix="NIDAQ-ScanType", kind=Kind.config, string=True)
+    sampling_rate = Cpt(EpicsSignal, suffix="NIDAQ-SamplingRateRequested", kind=Kind.config, auto_monitor=True)
+    sampling_rate_string = Cpt(EpicsSignal, suffix="NIDAQ-SamplingRateRequested", kind=Kind.config, string=True, auto_monitor=True)
     scan_duration = Cpt(EpicsSignal, suffix="NIDAQ-SamplingDuration", kind=Kind.config)
-    readout_range = Cpt(EpicsSignal, suffix="NIDAQ-ReadoutRange", kind=Kind.config)
-    encoder_factor = Cpt(EpicsSignal, suffix="NIDAQ-EncoderFactor", kind=Kind.config)
+    readout_range = Cpt(EpicsSignal, suffix="NIDAQ-ReadoutRange", kind=Kind.config, auto_monitor=True)
+    readout_range_string = Cpt(EpicsSignal, suffix="NIDAQ-ReadoutRange", kind=Kind.config, string=True, auto_monitor=True)
+    encoder_factor = Cpt(EpicsSignal, suffix="NIDAQ-EncoderFactor", kind=Kind.config, auto_monitor=True)
+    encoder_factor_string = Cpt(EpicsSignal, suffix="NIDAQ-EncoderFactor", kind=Kind.config, string=True, auto_monitor=True)
     stop_call = Cpt(EpicsSignal, suffix="NIDAQ-Stop", kind=Kind.config)
     power = Cpt(EpicsSignal, suffix="NIDAQ-Power", kind=Kind.config)
     heartbeat = Cpt(EpicsSignal, suffix="NIDAQ-Heartbeat", kind=Kind.config, auto_monitor=True)
     time_left = Cpt(EpicsSignalRO, suffix="NIDAQ-TimeLeft", kind=Kind.config, auto_monitor=True)
 
-    ai_chans = Cpt(EpicsSignal, suffix="NIDAQ-AIChans", kind=Kind.config)
-    ci_chans = Cpt(EpicsSignal, suffix="NIDAQ-CIChans", kind=Kind.config)
-    di_chans = Cpt(EpicsSignal, suffix="NIDAQ-DIChans", kind=Kind.config)
+    ai_chans = Cpt(EpicsSignal, suffix="NIDAQ-AIChans", kind=Kind.config, auto_monitor=True)
+    ci_chans = Cpt(EpicsSignal, suffix="NIDAQ-CIChans", kind=Kind.config, auto_monitor=True)
+    di_chans = Cpt(EpicsSignal, suffix="NIDAQ-DIChans", kind=Kind.config, auto_monitor=True)
+    add_chans = Cpt(EpicsSignal, suffix="NIDAQ-AddChans", kind=Kind.config, auto_monitor=True)
+
+    smpl_abs_ln = Cpt(EpicsSignal, suffix="NIDAQ-smpl_abs_ln", kind=Kind.config, auto_monitor=True)
+    ref_abs_ln = Cpt(EpicsSignal, suffix="NIDAQ-ref_abs_ln", kind=Kind.config, auto_monitor=True)
+
+    smpl_abs_no = Cpt(EpicsSignal, suffix="NIDAQ-smpl_abs_no", kind=Kind.config, auto_monitor=True)
+    smpl_abs_no_string = Cpt(EpicsSignal, suffix="NIDAQ-smpl_abs_no", kind=Kind.config, string=True, auto_monitor=True)
+
+    smpl_abs_de = Cpt(EpicsSignal, suffix="NIDAQ-smpl_abs_de", kind=Kind.config, auto_monitor=True)
+    smpl_abs_de_string = Cpt(EpicsSignal, suffix="NIDAQ-smpl_abs_de", kind=Kind.config, string=True, auto_monitor=True)
+
+    smpl_fluo_no = Cpt(EpicsSignal, suffix="NIDAQ-smpl_fluo_no", kind=Kind.config, auto_monitor=True)
+    smpl_fluo_no_string = Cpt(EpicsSignal, suffix="NIDAQ-smpl_fluo_no", kind=Kind.config, string=True, auto_monitor=True)
+
+    smpl_fluo_de = Cpt(EpicsSignal, suffix="NIDAQ-smpl_fluo_de", kind=Kind.config, auto_monitor=True)
+    smpl_fluo_de_string = Cpt(EpicsSignal, suffix="NIDAQ-smpl_fluo_de", kind=Kind.config, string=True, auto_monitor=True)
+
+    ref_abs_no = Cpt(EpicsSignal, suffix="NIDAQ-ref_abs_no", kind=Kind.config, auto_monitor=True)
+    ref_abs_no_string = Cpt(EpicsSignal, suffix="NIDAQ-ref_abs_no", kind=Kind.config, string=True, auto_monitor=True)
+
+    ref_abs_de = Cpt(EpicsSignal, suffix="NIDAQ-ref_abs_de", kind=Kind.config, auto_monitor=True)
+    ref_abs_de_string = Cpt(EpicsSignal, suffix="NIDAQ-ref_abs_de", kind=Kind.config, string=True, auto_monitor=True)
 
 
 class Nidaq(PSIDeviceBase, NidaqControl):
@@ -357,7 +528,7 @@ class Nidaq(PSIDeviceBase, NidaqControl):
         super().__init__(name=name, prefix=prefix, scan_info=scan_info, **kwargs)
         self.scan_info: ScanInfo
         self.timeout_wait_for_signal = 5  # put 5s firsts
-        self._timeout_wait_for_pv = 3  # 3s timeout for pv calls
+        self._timeout_wait_for_pv = 5  # 5s timeout for pv calls. editted due to timeout issues persisting 
         self.valid_scan_names = [
             "xas_simple_scan",
             "xas_simple_scan_with_xrd",
@@ -556,7 +727,11 @@ class Nidaq(PSIDeviceBase, NidaqControl):
         # Stage call to IOC
         status = CompareStatus(self.state, NidaqState.STAGE)
         self.cancel_on_stop(status)
-        self.stage_call.set(1).wait(timeout=self._timeout_wait_for_pv)
+        # TODO 11.11.25/HS64
+        # Switched from set to put in the hope to get rid of the rare event where nidaq is stopped at the start of a scan
+        # Problems consistently persisting, testing changing back to set, unconvinced this is the actual cause 14.11.25/AHC
+        # self.stage_call.set(1).wait(timeout=self._timeout_wait_for_pv)
+        self.stage_call.put(1)
         status.wait(timeout=self.timeout_wait_for_signal)
         if self.scan_info.msg.scan_name != "nidaq_continuous_scan":
             status = self.on_kickoff()

debye_bec/devices/pilatus/pilatus.py

@@ -6,13 +6,13 @@ import enum
 import threading
 import time
 import traceback
-from typing import TYPE_CHECKING
+from typing import TYPE_CHECKING, Tuple
 
 import numpy as np
 from bec_lib.file_utils import get_full_path
 from bec_lib.logger import bec_logger
 from ophyd import Component as Cpt
-from ophyd import EpicsSignal, Kind
+from ophyd import EpicsSignal, EpicsSignalRO, Kind
 from ophyd.areadetector.cam import ADBase, PilatusDetectorCam
 from ophyd.areadetector.plugins import HDF5Plugin_V22 as HDF5Plugin
 from ophyd.areadetector.plugins import ImagePlugin_V22 as ImagePlugin
@@ -145,6 +145,19 @@ class Pilatus(PSIDeviceBase, ADBase):
 
     # USER_ACCESS = ["start_live_mode", "stop_live_mode"]
 
+    cam_gain_menu_string = Cpt(EpicsSignalRO, suffix='cam1:GainMenu', string=True)
+
+    _default_configuration_attrs = [
+        'cam.threshold_energy',
+        'cam.threshold_auto_apply',
+        'cam.gain_menu',
+        'cam_gain_menu_string',
+        'cam.pixel_cut_off',
+        'cam.acquire_time',
+        'cam.num_exposures',
+        'cam.model',
+    ]
+
     cam = Cpt(PilatusDetectorCam, "cam1:")
     hdf = Cpt(HDF5Plugin, "HDF1:")
     image1 = Cpt(ImagePlugin, "image1:")
@@ -203,22 +216,11 @@ class Pilatus(PSIDeviceBase, ADBase):
         PreviewSignal,
         name="preview",
         ndim=2,
-        num_rotation_90=0,  # Check this
+        num_rotation_90=3,
         doc="Preview signal for the Pilatus Detector",
     )
     file_event = Cpt(FileEventSignal, name="file_event")
 
-    @property
-    def baseline_signals(self):
-        """Define baseline signals"""
-        return [
-            self.cam.acquire_time,
-            self.cam.num_exposures,
-            self.cam.threshold_energy,
-            self.cam.gain_menu,
-            self.cam.pixel_cut_off,
-        ]
-
     def __init__(
         self,
         *,
@@ -366,68 +368,51 @@ class Pilatus(PSIDeviceBase, ADBase):
         status = status_acquire & status_writing & status_cam_server
         return status
 
-    def _calculate_trigger(self, scan_msg: ScanStatusMessage):
+    def _calculate_trigger(self, scan_msg: ScanStatusMessage) -> Tuple[float, float]:
         self._update_scan_parameter()
         total_osc = 0
+        calc_duration = 0
         total_trig_lo = 0
         total_trig_hi = 0
-        calc_duration = 0
-        n_trig_lo = 1
-        n_trig_hi = 1
-        init_lo = 1
-        init_hi = 1
-        lo_done = 0
-        hi_done = 0
-        if not self.scan_parameter.break_enable_low:
-            lo_done = 1
-        if not self.scan_parameter.break_enable_high:
-            hi_done = 1
-        start_time = time.time()
-        while True:
-            # TODO, we should not use infinite loops, for now let's add the escape Timeout of 20s, but should eventually be reviewed.
-            if time.time() - start_time > 20:
-                raise RuntimeError(
-                    f"Calculating the number of triggers for scan {scan_msg.scan_name} took more than 20 seconds, aborting."
-                )
+        # Switching high/low is intended as angle is inverse to energy and settings in BEC are always in energy
+        loc_break_enable_low = self.scan_parameter.break_enable_high
+        loc_break_time_low = self.scan_parameter.break_time_high
+        loc_cycle_low = self.scan_parameter.cycle_high
+        loc_break_enable_high = self.scan_parameter.break_enable_low
+        loc_break_time_high = self.scan_parameter.break_time_low
+        loc_cycle_high = self.scan_parameter.cycle_low
+
+        if not loc_break_enable_low:
+            loc_break_time_low = 0
+            loc_cycle_low = 1
+        if not loc_break_enable_high:
+            loc_break_time_high = 0
+            loc_cycle_high = 1
+
+        total_osc = self.scan_parameter.scan_duration / (
+            self.scan_parameter.scan_time +
+            loc_break_time_low / (2 * loc_cycle_low) +
+            loc_break_time_high / (2 * loc_cycle_high)
+        )
+        total_osc = np.ceil(total_osc)
+        total_osc = total_osc + total_osc % 2 # round up to the next even number
+
+        if loc_break_enable_low:
+            total_trig_lo = np.floor(total_osc / (2 * loc_cycle_low))
+        if loc_break_enable_high:
+            total_trig_hi = np.floor(total_osc / (2 * loc_cycle_high))
+        calc_duration = total_osc * self.scan_parameter.scan_time + total_trig_lo * loc_break_time_low + total_trig_hi * loc_break_time_high
+		
+        if calc_duration < self.scan_parameter.scan_duration:
+            # Due to inaccuracy in formula, this can happen, we then need to manually add two oscillations and recalculate the triggers
             total_osc = total_osc + 2
-            calc_duration = calc_duration + 2 * self.scan_parameter.scan_time
+            if loc_break_enable_low:
+                total_trig_lo = np.floor(total_osc / (2 * loc_cycle_low))
+            if loc_break_enable_high:
+                total_trig_hi = np.floor(total_osc / (2 * loc_cycle_high))
+            calc_duration = total_osc * self.scan_parameter.scan_time + total_trig_lo * loc_break_time_low + total_trig_hi * loc_break_time_high
 
-            if self.scan_parameter.break_enable_low and n_trig_lo >= self.scan_parameter.cycle_low:
-                n_trig_lo = 1
-                calc_duration = calc_duration + self.scan_parameter.break_time_low
-                if init_lo:
-                    lo_done = 1
-                    init_lo = 0
-            else:
-                n_trig_lo += 1
-
-            if (
-                self.scan_parameter.break_enable_high
-                and n_trig_hi >= self.scan_parameter.cycle_high
-            ):
-                n_trig_hi = 1
-                calc_duration = calc_duration + self.scan_parameter.break_time_high
-                if init_hi:
-                    hi_done = 1
-                    init_hi = 0
-            else:
-                n_trig_hi += 1
-
-            if lo_done and hi_done:
-                n = np.floor(self.scan_parameter.scan_duration / calc_duration)
-                total_osc = total_osc * n
-                if self.scan_parameter.break_enable_low:
-                    total_trig_lo = n + 1
-                if self.scan_parameter.break_enable_high:
-                    total_trig_hi = n + 1
-                calc_duration = calc_duration * n
-                lo_done = 0
-                hi_done = 0
-
-            if calc_duration >= self.scan_parameter.scan_duration:
-                break
-
-        return total_trig_lo + total_trig_hi
+        return total_trig_lo, total_trig_hi
 
     ########################################
     #  Beamline Specific Implementations   #
@@ -480,6 +465,14 @@ class Pilatus(PSIDeviceBase, ADBase):
         """
         # self.stop_live_mode()  # Make sure that live mode is stopped if scan runs
 
+        # If user has activated alignment mode on qt panel, switch back to multitrigger and stop acquisition
+        if self.cam.trigger_mode.get() != TRIGGERMODE.MULT_TRIGGER.value:
+            self.cam.trigger_mode.set(TRIGGERMODE.MULT_TRIGGER.value).wait(5)
+        if self.cam.acquire.get() == ACQUIREMODE.ACQUIRING.value:
+            self.cam.acquire.put(0)
+            status_cam = CompareStatus(self.cam.acquire, ACQUIREMODE.DONE.value)
+            status_cam.wait(timeout=5)
+
         scan_msg: ScanStatusMessage = self.scan_info.msg
         if scan_msg.scan_name in self.xas_xrd_scan_names:
             self._update_scan_parameter()

debye_bec/devices/pilatus_curtain.py

@@ -69,11 +69,11 @@ class PilatusCurtain(PSIDeviceBase):
 
     def on_unstage(self) -> DeviceStatus | None:
         """Called while unstaging the device."""
-        return self.close()
+        # return self.close()
 
     def on_stop(self) -> DeviceStatus | None:
         """Called when the device is stopped."""
-        return self.close()
+        # return self.close()
 
     def open(self) -> DeviceStatus | None:
         """Open the cover"""

debye_bec/devices/reffoilchanger.py

@@ -52,9 +52,15 @@ class Reffoilchanger(PSIDeviceBase):
     status = Cpt(
         EpicsSignal, suffix="ES2-REF:SELN-FilterState-ENUM_RBV", kind="config", doc="Status"
     )
+    status_string = Cpt(
+        EpicsSignal, suffix="ES2-REF:SELN-FilterState-ENUM_RBV", kind="config", doc="Status", string=True
+    )
     op_mode = Cpt(
         EpicsSignalWithRBV, suffix="ES2-REF:SELN-OpMode-ENUM", kind="config", doc="Status"
     )
+    op_mode_string = Cpt(
+        EpicsSignalWithRBV, suffix="ES2-REF:SELN-OpMode-ENUM", kind="config", doc="Status", string=True
+    )
     ref_set = Cpt(EpicsSignal, suffix="ES2-REF:SELN-SET", kind="config", doc="Requested reference")
     ref_rb = Cpt(
         EpicsSignalRO, suffix="ES2-REF:SELN-RB", kind="config", doc="Currently set reference"

debye_bec/file_writer/debye_nexus_structure.py

@@ -1,5 +1,6 @@
 from bec_server.file_writer.default_writer import DefaultFormat
 
+import debye_bec.bec_widgets.widgets.x01da_parameters as bl
 
 class DebyeNexusStructure(DefaultFormat):
     """Nexus Structure for Debye"""
@@ -12,102 +13,6 @@ class DebyeNexusStructure(DefaultFormat):
         instrument = entry.create_group(name="instrument")
         instrument.attrs["NX_class"] = "NXinstrument"
 
-        ###################
-        ## mo1_bragg specific information
-        ###################
-
-        # Logic if device exist
-        if "mo1_bragg" in self.device_manager.devices:
-
-            monochromator = instrument.create_group(name="monochromator")
-            monochromator.attrs["NX_class"] = "NXmonochromator"
-            crystal = monochromator.create_group(name="crystal")
-            crystal.attrs["NX_class"] = "NXcrystal"
-
-            # Create a dataset
-            chemical_formular = crystal.create_dataset(name="chemical_formular", data="Si")
-            chemical_formular.attrs["NX_class"] = "NX_CHAR"
-
-            # Create a softlink
-            d_spacing = crystal.create_soft_link(
-                name="d_spacing",
-                target="/entry/collection/devices/mo1_bragg/mo1_bragg_crystal_current_d_spacing/value",
-            )
-            d_spacing.attrs["NX_class"] = "NX_FLOAT"
-
-            offset = crystal.create_soft_link(
-                name="offset",
-                target="/entry/collection/devices/mo1_bragg/mo1_bragg_crystal_current_offset/value",
-            )
-            offset.attrs["NX_class"] = "NX_FLOAT"
-
-            reflection = crystal.create_soft_link(
-                name="reflection",
-                target="/entry/collection/devices/mo1_bragg/mo1_bragg_crystal_current_xtal_string/value",
-            )
-            reflection.attrs["NX_class"] = "NX_CHAR"
-
-        ##################
-        ## cm mirror specific information
-        ###################
-
-        collimating_mirror = instrument.create_group(name="collimating_mirror")
-        collimating_mirror.attrs["NX_class"] = "NXmirror"
-
-        cm_substrate_material = collimating_mirror.create_dataset(
-            name="substrate_material", data="Si"
-        )
-        cm_substrate_material.attrs["NX_class"] = "NX_CHAR"
-
-        cm_bending_radius = collimating_mirror.create_soft_link(
-            name="sagittal radius",
-            target="/entry/collection/devices/cm_bnd_radius/cm_bnd_radius/value",
-        )
-        cm_bending_radius.attrs["NX_class"] = "NX_FLOAT"
-        cm_bending_radius.attrs["units"] = "km"
-
-        cm_incidence_angle = collimating_mirror.create_soft_link(
-            name="incidence angle", target="/entry/collection/devices/cm_rotx/cm_rotx/value"
-        )
-        cm_incidence_angle.attrs["NX_class"] = "NX_FLOAT"
-
-        cm_yaw_angle = collimating_mirror.create_soft_link(
-            name="incident angle", target="/entry/collection/devices/cm_roty/cm_roty/value"
-        )
-        cm_yaw_angle.attrs["NX_class"] = "NX_FLOAT"
-
-        ##################
-        ## fm mirror specific information
-        ###################
-
-        focusing_mirror = instrument.create_group(name="focusing_mirror")
-        focusing_mirror.attrs["NX_class"] = "NXmirror"
-
-        fm_substrate_material = focusing_mirror.create_dataset(name="substrate_material", data="Si")
-        fm_substrate_material.attrs["NX_class"] = "NX_CHAR"
-
-        fm_bending_radius = focusing_mirror.create_soft_link(
-            name="sagittal radius",
-            target="/entry/collection/devices/fm_bnd_radius/fm_bnd_radius/value",
-        )
-        fm_bending_radius.attrs["NX_class"] = "NX_FLOAT"
-
-        fm_incidence_angle = focusing_mirror.create_soft_link(
-            name="incidence angle",
-            target="/entry/collection/devices/fm_incidence_angle/fm_incidence_angle/value",
-        )
-        fm_incidence_angle.attrs["NX_class"] = "NX_FLOAT"
-
-        fm_yaw_angle = focusing_mirror.create_soft_link(
-            name="yaw angle", target="/entry/collection/devices/fm_roty/fm_roty/value"
-        )
-        fm_yaw_angle.attrs["NX_class"] = "NX_FLOAT"
-
-        fm_roll_angle = focusing_mirror.create_soft_link(
-            name="roll angle", target="/entry/collection/devices/fm_rotz/fm_rotz/value"
-        )
-        fm_roll_angle.attrs["NX_class"] = "NX_FLOAT"
-
         ##################
         ## source specific information
         ###################
@@ -123,3 +28,326 @@ class DebyeNexusStructure(DefaultFormat):
 
         probe = source.create_dataset(name="probe", data="X-ray")
         probe.attrs["NX_class"] = "NX_CHAR"
+
+        if "curr" in self.device_manager.devices:
+            ring_current = source.create_soft_link(
+            name="ring_current",
+            target="/entry/collection/devices/curr/curr/value",
+            )
+            ring_current.attrs["NX_class"] = "NX_FLOAT"
+            ring_current.attrs["units"] = "mA"
+
+        ###################
+        ## mo1_bragg specific information
+        ###################
+
+        ## Logic if device exist
+        if "mo1_bragg" in self.device_manager.devices:
+
+            monochromator = instrument.create_group(name="monochromator")
+            monochromator.attrs["NX_class"] = "NXmonochromator"
+            crystal = monochromator.create_group(name="crystal")
+            crystal.attrs["NX_class"] = "NXcrystal"
+
+            # Create a dataset
+            chemical_formular = crystal.create_dataset(name="chemical_formular", data="Si")
+            chemical_formular.attrs["NX_class"] = "NX_CHAR"
+
+            reflection = crystal.create_soft_link(
+                name="reflection",
+                target="/entry/collection/devices/mo1_bragg/mo1_bragg_crystal_current_xtal_string/value",
+            )
+            reflection.attrs["NX_class"] = "NX_CHAR"    
+
+            # Create a softlink
+            d_spacing = crystal.create_soft_link(
+            name="d_spacing",
+            target="/entry/collection/devices/mo1_bragg/mo1_bragg_crystal_current_d_spacing/value",
+            )
+            d_spacing.attrs["NX_class"] = "NX_FLOAT"
+            d_spacing.attrs["units"] = "angstrom"
+
+            bragg_offset = crystal.create_soft_link(
+                name="bragg_offset",
+                target="/entry/collection/devices/mo1_bragg/mo1_bragg_crystal_current_bragg_off/value",
+            )
+            bragg_offset.attrs["NX_class"] = "NX_FLOAT"      
+            bragg_offset.attrs["units"] = "degree"      
+
+            phi_offset = crystal.create_soft_link(
+                name="phi_offset",
+                target="/entry/collection/devices/mo1_bragg/mo1_bragg_crystal_current_phi_off/value",
+            )
+            phi_offset.attrs["NX_class"] = "NX_FLOAT"      
+            phi_offset.attrs["units"] = "degree"
+
+            ## Logic if device exist
+            if "mo1_roty" in self.device_manager.devices: 
+
+                # Create a softlink
+                azimuthal_angle = crystal.create_soft_link(
+                name="azimuthal_angle",
+                target="/entry/collection/devices/mo1_roty/mo1_roty/value",
+                )
+                azimuthal_angle.attrs["NX_class"] = "NX_FLOAT"  
+                azimuthal_angle.attrs["units"] = "degree"  
+                   
+            azm_offset = crystal.create_soft_link(
+                name="azm_offset",
+                target="/entry/collection/devices/mo1_bragg/mo1_bragg_crystal_current_azm_off/value",
+            )
+            azm_offset.attrs["NX_class"] = "NX_FLOAT"      
+            azm_offset.attrs["units"] = "degree"
+
+            miscut = crystal.create_soft_link(
+                name="miscut",
+                target="/entry/collection/devices/mo1_bragg/mo1_bragg_crystal_current_miscut/value",
+            )
+            miscut.attrs["NX_class"] = "NX_FLOAT"      
+            miscut.attrs["units"] = "degree"      
+
+        ###################
+        ### cm mirror specific information
+        ####################
+
+        collimating_mirror = instrument.create_group(name="collimating_mirror")
+        collimating_mirror.attrs["NX_class"] = "NXmirror"
+
+        cm_substrate_material = collimating_mirror.create_dataset(
+            name="substrate_material", data="Si"
+        )
+        cm_substrate_material.attrs["NX_class"] = "NX_CHAR"
+
+        #previous error due to space in name field
+
+        if "cm_bnd_radius" in self.device_manager.devices:
+            cm_bending_radius = collimating_mirror.create_soft_link(
+                name="sagittal_radius",
+                target="/entry/collection/devices/cm_bnd_radius/cm_bnd_radius/value",
+            )
+            cm_bending_radius.attrs["NX_class"] = "NX_FLOAT"
+            cm_bending_radius.attrs["units"] = "km"
+
+        if "cm_rotx" in self.device_manager.devices:
+            cm_incidence_angle = collimating_mirror.create_soft_link(
+                name="incidence_angle", target="/entry/collection/devices/cm_rotx/cm_rotx/value"
+            )
+            cm_incidence_angle.attrs["NX_class"] = "NX_FLOAT"
+            cm_incidence_angle.attrs["units"] = "mrad"
+
+        if "cm_roty" in self.device_manager.devices:
+            cm_yaw_angle = collimating_mirror.create_soft_link(
+                name="yaw_angle", target="/entry/collection/devices/cm_roty/cm_roty/value"
+            )
+            cm_yaw_angle.attrs["NX_class"] = "NX_FLOAT"
+            cm_yaw_angle.attrs["units"] = "mrad"
+
+        if "cm_rotz" in self.device_manager.devices:
+            cm_roll_angle = collimating_mirror.create_soft_link(
+                name="roll_angle", target="/entry/collection/devices/cm_rotz/cm_rotz/value"
+            )
+            cm_roll_angle.attrs["NX_class"] = "NX_FLOAT"
+            cm_roll_angle.attrs["units"] = "mrad"
+
+        if 'cm_trx' in self.device_manager.devices:
+            cm_trx = - self.device_manager.devices.cm_trx.read(cached=True).get('cm_trx').get('value')
+            stripe = 'Unknown'
+            for name, low, high in zip(bl.cm.surface, bl.cm.limOptX[0], bl.cm.limOptX[1]):
+                if low <= cm_trx <= high:
+                    stripe = name
+            cm_stripe = collimating_mirror.create_dataset(
+                name="stripe", data=stripe
+            )
+            cm_stripe.attrs["NX_class"] = "NX_CHAR"
+
+        ###################
+        ### fm mirror specific information
+        ####################
+
+        focusing_mirror = instrument.create_group(name="focusing_mirror")
+        focusing_mirror.attrs["NX_class"] = "NXmirror"
+
+        fm_substrate_material = focusing_mirror.create_dataset(
+            name="substrate_material", data="Si"
+        )
+        fm_substrate_material.attrs["NX_class"] = "NX_CHAR"
+
+        if "fm_bnd_radius" in self.device_manager.devices:
+            fm_bending_radius = focusing_mirror.create_soft_link(
+                name="sagittal_radius",
+                target="/entry/collection/devices/fm_bnd_radius/fm_bnd_radius/value",
+            )
+            fm_bending_radius.attrs["NX_class"] = "NX_FLOAT"
+            fm_bending_radius.attrs["units"] = "km"
+
+        if "fm_rotx" in self.device_manager.devices:
+            fm_incidence_angle = focusing_mirror.create_soft_link(
+                name="incidence_angle", target="/entry/collection/devices/fm_rotx/fm_rotx/value"
+            )
+            fm_incidence_angle.attrs["NX_class"] = "NX_FLOAT"
+            fm_incidence_angle.attrs["units"] = "mrad"
+
+        if "fm_roty" in self.device_manager.devices:
+            fm_yaw_angle = focusing_mirror.create_soft_link(
+                name="yaw_angle", target="/entry/collection/devices/fm_roty/fm_roty/value"
+            )
+            fm_yaw_angle.attrs["NX_class"] = "NX_FLOAT"
+            fm_yaw_angle.attrs["units"] = "mrad"
+
+        if "fm_rotz" in self.device_manager.devices:
+            fm_roll_angle = focusing_mirror.create_soft_link(
+                name="roll_angle", target="/entry/collection/devices/fm_rotz/fm_rotz/value"
+            )
+            fm_roll_angle.attrs["NX_class"] = "NX_FLOAT"
+            fm_roll_angle.attrs["units"] = "mrad"
+
+        if 'fm_trx' in self.device_manager.devices:
+            fm_trx = - self.device_manager.devices.fm_trx.read(cached=True).get('fm_trx').get('value')
+            stripe = 'Unknown'
+            for name, low, high in zip(bl.fm.surfaceFlat, bl.fm.limOptXFlat[1], bl.fm.limOptXFlat[0]):
+                if low <= fm_trx <= high:
+                    stripe = name + ' (flat)'
+            for name, low, high in zip(bl.fm.surfaceToroid, bl.fm.limOptXToroid[1], bl.fm.limOptXToroid[0]):
+                if low <= fm_trx <= high:
+                    stripe = name + ' (toroid)'
+            fm_stripe = focusing_mirror.create_dataset(
+                name="stripe", data=stripe
+            )
+            fm_stripe.attrs["NX_class"] = "NX_CHAR"
+
+        ###################
+        ## nidaq specific information
+        ###################
+
+        ## Logic if device exist
+        if "nidaq" in self.device_manager.devices:       
+            
+            #ai_chans_bits = self.device_manager.devices.nidaq.ai_chans.read(cached=True).get("nidaq_ai_chans").get("value")
+            ai_chans_bits = self.configuration.get("nidaq", {}).get("nidaq_ai_chans", {}).get("value")
+            ci_chans_bits = self.configuration.get("nidaq", {}).get("nidaq_ci_chans", {}).get("value")
+            #add_chans_bits = self.device_manager.devices.nidaq.add_chans.read(cached=True).get("nidaq_add_chans").get("value")
+            add_chans_bits = self.configuration.get("nidaq", {}).get("nidaq_add_chans", {}).get("value")
+
+            measurement_mode = entry.create_group(name="mode")
+            measurement_mode.attrs["NX_class"] = "NX_CHAR"
+
+            if (int(ci_chans_bits) & 0x7F) != 0:
+                # Create a dataset
+                rayspec_sdd_active = measurement_mode.create_group(name="Multi_Element_Partial_Fluorescence_Yield")
+                me_sdd = rayspec_sdd_active.create_dataset(name="Detector", data="Rayspec 7 element Silicon Drift Detector")
+                me_sdd.attrs["NX_class"] = "NX_CHAR"
+
+            if (int(ci_chans_bits) & (1<<8)) != 0:
+                # Create a dataset
+                ketek_sdd_active = measurement_mode.create_group(name="Single_Element_Partial_Fluorescence_Yield")
+                se_sdd = ketek_sdd_active.create_dataset(name="Detector", data="Ketex mini single element Silicon Drift Detector")
+                se_sdd.attrs["NX_class"] = "NX_CHAR"
+
+            if ((int(ai_chans_bits) & (1<<6)) != 0):
+                # Create a dataset
+                pips_active = measurement_mode.create_group(name="Total_Flourescence_Yield")
+                tfy = pips_active.create_dataset(name="Detector", data="Mirion Technologies Partially Depeleted PIPS Detector")
+                tfy.attrs["NX_class"] = "NX_CHAR"
+
+            if ((int(ai_chans_bits) & (1<<0)) != 0) & ((int(ai_chans_bits) & (1<<2)) != 0):
+                # Create a dataset
+                ai0ai2_active = measurement_mode.create_group(name="Sample_Transmission")
+                sam_trans = ai0ai2_active.create_dataset(name="Detector", data="Ionitec 15 cm gas filled Ionisation Chambers")
+                sam_trans.attrs["NX_class"] = "NX_CHAR"
+
+            if ((int(ai_chans_bits) & (1<<2)) != 0) & ((int(ai_chans_bits) & (1<<4)) != 0):
+                # Create a dataset
+                ai2ai4_active = measurement_mode.create_group(name="Reference_Transmission")
+                ref_trans = ai2ai4_active.create_dataset(name="Detector", data="Ionitec 15 cm gas filled Ionisation Chambers")
+                ref_trans.attrs["NX_class"] = "NX_CHAR"
+
+            main_data = entry.create_group(name="data")
+            main_data.attrs["NX_class"] = "NXdata"
+
+            ##################
+            ## energy, test whether the signal exists. how to check from config?
+            ###################
+    
+            energy = main_data.create_group(name="energy")
+            energy.attrs["NX_class"] = "NXdata"
+            energy.attrs["units"] = "eV"
+    
+            main_data.create_soft_link(name="energy", target="/entry/collection/readout_groups/async/nidaq/nidaq_energy/value")
+    
+            ##################
+            ## i0
+            ###################
+    
+            if (int(ai_chans_bits) & (1<<0)) !=0:
+                i0 = main_data.create_group(name="i0")
+                i0.attrs["NX_class"] = "NXdata"
+                i0.attrs["units"] = "V"
+    
+                main_data.create_soft_link(name="i0", target="/entry/collection/readout_groups/async/nidaq/nidaq_ai0_mean/value")
+
+            ##################
+            ## i1
+            ###################
+    
+            if (int(ai_chans_bits) & (1<<2)) !=0:
+                i1 = main_data.create_group(name="i1")
+                i1.attrs["NX_class"] = "NXdata"
+                i1.attrs["units"] = "V"
+
+                main_data.create_soft_link(name="i1", target="/entry/collection/readout_groups/async/nidaq/nidaq_ai2_mean/value")
+
+            ##################
+            ## i2
+            ###################
+
+            if (int(ai_chans_bits) & (1<<4)) !=0:
+                i2 = main_data.create_group(name="i2")
+                i2.attrs["NX_class"] = "NXdata"
+                i2.attrs["units"] = "V"
+
+                main_data.create_soft_link(name="i2", target="/entry/collection/readout_groups/async/nidaq/nidaq_ai4_mean/value")
+
+            ##################
+            ## ci sum
+            ###################
+
+            if int(ci_chans_bits) > 0:
+                ci_sum = main_data.create_group(name="Fluorescence_Sum")
+                ci_sum.attrs["NX_class"] = "NXdata"
+                ci_sum.attrs["units"] = "counts"
+
+                main_data.create_soft_link(name="Fluorescence_Sum", target="/entry/collection/readout_groups/async/nidaq/nidaq_cisum/value")  
+
+            ##################
+            ## mu sample, test whether the signal exists. how to check from config?
+            ###################
+
+            if (int(add_chans_bits) & (1<<0)) !=0:    
+                mu_sample = main_data.create_group(name="mu_sample")
+                mu_sample.attrs["NX_class"] = "NXdata"
+    
+                main_data.create_soft_link(name="mu_sample", target="/entry/collection/readout_groups/async/nidaq/nidaq_smpl_abs/value")
+
+            ##################
+            ## fluo sample, test whether the signal exists. how to check from config?
+            ###################
+
+            if (int(add_chans_bits) & (1<<1)) !=0:    
+                mu_sample = main_data.create_group(name="fluo_sample")
+                mu_sample.attrs["NX_class"] = "NXdata"
+    
+                main_data.create_soft_link(name="fluo_sample", target="/entry/collection/readout_groups/async/nidaq/nidaq_smpl_fluo/value")
+
+            ##################
+            ## mu reference, test whether the signal exists. how to check from config?
+            ###################
+    
+            if (int(add_chans_bits) & (1<<2)) !=0:  
+                mu_reference = main_data.create_group(name="mu_reference")
+                mu_reference.attrs["NX_class"] = "NXdata"
+    
+                main_data.create_soft_link(name="mu_reference", target="/entry/collection/readout_groups/async/nidaq/nidaq_ref_abs/value")
+
+
+
+

pyproject.toml

@@ -12,7 +12,15 @@ classifiers = [
     "Programming Language :: Python :: 3",
     "Topic :: Scientific/Engineering",
 ]
-dependencies = ["numpy", "scipy", "bec_lib", "h5py", "ophyd_devices"]
+dependencies = [
+    "numpy",
+    "scipy",
+    "bec_lib",
+    "h5py",
+    "ophyd_devices",
+    "opencv-python==4.11.0.86",
+    "xrt",
+]
 
 [project.optional-dependencies]
 dev = [

tests/tests_devices/test_mo1_bragg.py

@@ -52,7 +52,7 @@ def test_init(mock_bragg):
     dev = mock_bragg
     assert dev.name == "bragg"
     assert dev.prefix == "X01DA-OP-MO1:BRAGG:"
-    assert dev.crystal.offset_si111._read_pvname == "X01DA-OP-MO1:BRAGG:offset_si111_RBV"
+    assert dev.crystal.bragg_off_si111._read_pvname == "X01DA-OP-MO1:BRAGG:bragg_off_si111_RBV"
     assert dev.move_abs._read_pvname == "X01DA-OP-MO1:BRAGG:move_abs"
 
 
@@ -106,14 +106,14 @@ def test_set_xtal(mock_bragg):
     dev = mock_bragg
     dev.set_xtal("111")
     # Default values for mock
-    assert dev.crystal.offset_si111.get() == 0
-    assert dev.crystal.offset_si311.get() == 0
+    assert dev.crystal.bragg_off_si111.get() == 0
+    assert dev.crystal.bragg_off_si311.get() == 0
     assert dev.crystal.d_spacing_si111.get() == 0
     assert dev.crystal.d_spacing_si311.get() == 0
     assert dev.crystal.xtal_enum.get() == 0
-    dev.set_xtal("311", offset_si111=1, offset_si311=2, d_spacing_si111=3, d_spacing_si311=4)
-    assert dev.crystal.offset_si111.get() == 1
-    assert dev.crystal.offset_si311.get() == 2
+    dev.set_xtal("311", bragg_off_si111=1, bragg_off_si311=2, d_spacing_si111=3, d_spacing_si311=4)
+    assert dev.crystal.bragg_off_si111.get() == 1
+    assert dev.crystal.bragg_off_si311.get() == 2
     assert dev.crystal.d_spacing_si111.get() == 3
     assert dev.crystal.d_spacing_si311.get() == 4
     assert dev.crystal.xtal_enum.get() == 1

tests/tests_scans/test_mono_bragg_scans.py

@@ -66,7 +66,6 @@ def test_xas_simple_scan(scan_assembler, ScanStubStatusMock):
             device=None,
             action="open_scan",
             parameter={
-                "scan_motors": [],
                 "readout_priority": {
                     "monitored": [],
                     "baseline": [],
@@ -168,7 +167,6 @@ def test_xas_simple_scan_with_xrd(scan_assembler, ScanStubStatusMock):
             device=None,
             action="open_scan",
             parameter={
-                "scan_motors": [],
                 "readout_priority": {
                     "monitored": [],
                     "baseline": [],
@@ -263,7 +261,6 @@ def test_xas_advanced_scan(scan_assembler, ScanStubStatusMock):
             device=None,
             action="open_scan",
             parameter={
-                "scan_motors": [],
                 "readout_priority": {
                     "monitored": [],
                     "baseline": [],
@@ -366,7 +363,6 @@ def test_xas_advanced_scan_with_xrd(scan_assembler, ScanStubStatusMock):
             device=None,
             action="open_scan",
             parameter={
-                "scan_motors": [],
                 "readout_priority": {
                     "monitored": [],
                     "baseline": [],

tests/tests_scans/test_nidaq_continous_scan.py

@@ -60,7 +60,6 @@ def test_xas_simple_scan(scan_assembler, ScanStubStatusMock):
             device=None,
             action="open_scan",
             parameter={
-                "scan_motors": [],
                 "readout_priority": {
                     "monitored": [],
                     "baseline": [],